Idea of this big series is to introduce the concept of PHY package in DT
and give PHY drivers a way to derive the base address from DT.
The concept of PHY package is nothing new and is already a thing in the
kernel with the API phy_package_join/leave/read/write.
What is currently lacking is describing this in DT and better reference
a base address to calculate offset from.
In the scenario of a PHY package where multiple address are used and
there isn't a way to get the base address of the PHY package from some
regs, getting the information from DT is the only way.
A possible example to this problem is this:
ethernet-phy-package@0 {
compatible = "qcom,qca8075-package";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
qcom,package-mode = "qsgmii";
ethernet-phy@1 {
reg = <1>;
};
phy4: ethernet-phy@4 {
reg = <4>;
};
};
The mdio parse functions are changed to address for this additional
special node, the function is changed to simply detect this node and
search also in this. (we match the node name to be "ethernet-phy-package")
PHY driver can then use introduced helper of_phy_package_join to join the
PHY to the PHY package and derive the base address from DT.
Changes v7:
- Rebase on top of net-next
- Add Reviewed-by tag for DT patch
- Change tx-driver-strength to tx-drive-strength
- Drop driver reference in DT
Changes v6:
- Back to absolute PHY implementation
- Correctly drop refcount for node on error condition and on PHY leave
- Drop DT include patch in favor for 3 boolean vendor property
- Fix Documentation problem for compatible and missing type and
description
- Drop redundand gpio-controller dependency and description
- Skip scanphy with invalid PHY Package node and make reg mandatory
- Rework fiber read status to use more generic function
- Split qca808x LED generalization patch to permit easier review
- Correctly return -EINVAL with wrong data passed to vendor property
- Drop removing LED ops for qca807x PHY driver with gpio-controller
Changes v5:
- Rebase on top of net-next
- Change implementation to base addr + offset in subnode
- Adapt to all the changes and cleanup done to at803x
Changes v4:
- Rework DT implementation
- Drop of autojoin support and rework to simple helper
- Rework PHY driver to the new implementation
- Add compatible for qca807x package
- Further cleanup patches
Changes v3:
- Add back compatible implementation
- Detach patch that can be handled separately (phy_package_mmd,
phy_package extended)
- Rework code to new simplified implementation with base addr + offset
- Improve documentation with additional info and description
Changes v2:
- Drop compatible "ethernet-phy-package", use node name prefix matching
instead
- Improve DT example
- Add reg for ethernet-phy-package
- Drop phy-mode for ethernet-phy-package
- Drop patch for generalization of phy-mode
- Drop global-phy property (handle internally to the PHY driver)
- Rework OF phy package code and PHY driver to handle base address
- Fix missing of_node_put
- Add some missing docs for added variables in struct
- Move some define from dt-bindings include to PHY driver
- Handle qsgmii validation in PHY driver
- Fix wrong include for gpiolib
- Drop reduntant version.h include
Christian Marangi (9):
dt-bindings: net: document ethernet PHY package nodes
net: phy: add support for scanning PHY in PHY packages nodes
net: phy: add devm/of_phy_package_join helper
net: phy: qcom: move more function to shared library
dt-bindings: net: Document Qcom QCA807x PHY package
net: phy: provide whether link has changed in c37_read_status
net: phy: qcom: move common qca808x LED define to shared header
net: phy: qcom: generalize some qca808x LED functions
net: phy: qca807x: add support for configurable LED
Robert Marko (1):
net: phy: qcom: add support for QCA807x PHY Family
.../bindings/net/ethernet-phy-package.yaml | 52 ++
.../devicetree/bindings/net/qcom,qca807x.yaml | 184 ++++
drivers/net/mdio/of_mdio.c | 79 +-
drivers/net/phy/broadcom.c | 3 +-
drivers/net/phy/mdio_bus.c | 44 +-
drivers/net/phy/phy_device.c | 107 ++-
drivers/net/phy/qcom/Kconfig | 8 +
drivers/net/phy/qcom/Makefile | 1 +
drivers/net/phy/qcom/at803x.c | 38 +-
drivers/net/phy/qcom/qca807x.c | 849 ++++++++++++++++++
drivers/net/phy/qcom/qca808x.c | 308 +------
drivers/net/phy/qcom/qcom-phy-lib.c | 247 +++++
drivers/net/phy/qcom/qcom.h | 123 +++
include/linux/phy.h | 8 +-
14 files changed, 1676 insertions(+), 375 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/ethernet-phy-package.yaml
create mode 100644 Documentation/devicetree/bindings/net/qcom,qca807x.yaml
create mode 100644 drivers/net/phy/qcom/qca807x.c
--
2.43.0
Document ethernet PHY package nodes used to describe PHY shipped in
bundle of 2-5 PHY. The special node describe a container of PHY that
share common properties. This is a generic schema and PHY package
should create specialized version with the required additional shared
properties.
Example are PHY packages that have some regs only in one PHY of the
package and will affect every other PHY in the package, for example
related to PHY interface mode calibration or global PHY mode selection.
The PHY package node MUST declare the base address used by the PHY driver
for global configuration by calculating the offsets of the global PHY
based on the base address of the PHY package.
Each reg of the PHYs defined in the PHY package node is absolute and
describe the real address of the Ethernet PHY on the bus.
Signed-off-by: Christian Marangi <[email protected]>
---
.../bindings/net/ethernet-phy-package.yaml | 52 +++++++++++++++++++
1 file changed, 52 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/ethernet-phy-package.yaml
diff --git a/Documentation/devicetree/bindings/net/ethernet-phy-package.yaml b/Documentation/devicetree/bindings/net/ethernet-phy-package.yaml
new file mode 100644
index 000000000000..e567101e6f38
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ethernet-phy-package.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/ethernet-phy-package.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ethernet PHY Package Common Properties
+
+maintainers:
+ - Christian Marangi <[email protected]>
+
+description:
+ PHY packages are multi-port Ethernet PHY of the same family
+ and each Ethernet PHY is affected by the global configuration
+ of the PHY package.
+
+ Each reg of the PHYs defined in the PHY package node is
+ absolute and describe the real address of the Ethernet PHY on
+ the MDIO bus.
+
+properties:
+ $nodename:
+ pattern: "^ethernet-phy-package@[a-f0-9]+$"
+
+ reg:
+ minimum: 0
+ maximum: 31
+ description:
+ The base ID number for the PHY package.
+ Commonly the ID of the first PHY in the PHY package.
+
+ Some PHY in the PHY package might be not defined but
+ still occupy ID on the device (just not attached to
+ anything) hence the PHY package reg might correspond
+ to a not attached PHY (offset 0).
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ ^ethernet-phy@[a-f0-9]+$:
+ $ref: ethernet-phy.yaml#
+
+required:
+ - reg
+ - '#address-cells'
+ - '#size-cells'
+
+additionalProperties: true
--
2.43.0
Add support for scanning PHY in PHY package nodes. PHY packages nodes
are just container for actual PHY on the MDIO bus.
Their PHY address defined in the PHY package node are absolute and
reflect the address on the MDIO bus.
mdio_bus.c and of_mdio.c is updated to now support and parse also
PHY package subnode by checking if the node name match
"ethernet-phy-package".
As PHY package reg is mandatory and each PHY in the PHY package must
have a reg, every invalid PHY Package node is ignored and will be
skipped by the autoscan fallback.
Signed-off-by: Christian Marangi <[email protected]>
---
drivers/net/mdio/of_mdio.c | 79 +++++++++++++++++++++++++++-----------
drivers/net/phy/mdio_bus.c | 44 +++++++++++++++++----
2 files changed, 92 insertions(+), 31 deletions(-)
diff --git a/drivers/net/mdio/of_mdio.c b/drivers/net/mdio/of_mdio.c
index 64ebcb6d235c..08e607f62e10 100644
--- a/drivers/net/mdio/of_mdio.c
+++ b/drivers/net/mdio/of_mdio.c
@@ -139,6 +139,53 @@ bool of_mdiobus_child_is_phy(struct device_node *child)
}
EXPORT_SYMBOL(of_mdiobus_child_is_phy);
+static int __of_mdiobus_parse_phys(struct mii_bus *mdio, struct device_node *np,
+ bool *scanphys)
+{
+ struct device_node *child;
+ int addr, rc = 0;
+
+ /* Loop over the child nodes and register a phy_device for each phy */
+ for_each_available_child_of_node(np, child) {
+ if (of_node_name_eq(child, "ethernet-phy-package")) {
+ /* Ignore invalid ethernet-phy-package node */
+ if (!of_property_present(child, "reg"))
+ continue;
+
+ rc = __of_mdiobus_parse_phys(mdio, child, NULL);
+ if (rc && rc != -ENODEV)
+ goto exit;
+
+ continue;
+ }
+
+ addr = of_mdio_parse_addr(&mdio->dev, child);
+ if (addr < 0) {
+ /* Skip scanning for invalid ethernet-phy-package node */
+ if (scanphys)
+ *scanphys = true;
+ continue;
+ }
+
+ if (of_mdiobus_child_is_phy(child))
+ rc = of_mdiobus_register_phy(mdio, child, addr);
+ else
+ rc = of_mdiobus_register_device(mdio, child, addr);
+
+ if (rc == -ENODEV)
+ dev_err(&mdio->dev,
+ "MDIO device at address %d is missing.\n",
+ addr);
+ else if (rc)
+ goto exit;
+ }
+
+ return 0;
+exit:
+ of_node_put(child);
+ return rc;
+}
+
/**
* __of_mdiobus_register - Register mii_bus and create PHYs from the device tree
* @mdio: pointer to mii_bus structure
@@ -180,33 +227,18 @@ int __of_mdiobus_register(struct mii_bus *mdio, struct device_node *np,
return rc;
/* Loop over the child nodes and register a phy_device for each phy */
- for_each_available_child_of_node(np, child) {
- addr = of_mdio_parse_addr(&mdio->dev, child);
- if (addr < 0) {
- scanphys = true;
- continue;
- }
-
- if (of_mdiobus_child_is_phy(child))
- rc = of_mdiobus_register_phy(mdio, child, addr);
- else
- rc = of_mdiobus_register_device(mdio, child, addr);
-
- if (rc == -ENODEV)
- dev_err(&mdio->dev,
- "MDIO device at address %d is missing.\n",
- addr);
- else if (rc)
- goto unregister;
- }
+ rc = __of_mdiobus_parse_phys(mdio, np, &scanphys);
+ if (rc)
+ goto unregister;
if (!scanphys)
return 0;
/* auto scan for PHYs with empty reg property */
for_each_available_child_of_node(np, child) {
- /* Skip PHYs with reg property set */
- if (of_property_present(child, "reg"))
+ /* Skip PHYs with reg property set or ethernet-phy-package node */
+ if (of_property_present(child, "reg") ||
+ of_node_name_eq(child, "ethernet-phy-package"))
continue;
for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
@@ -227,15 +259,16 @@ int __of_mdiobus_register(struct mii_bus *mdio, struct device_node *np,
if (!rc)
break;
if (rc != -ENODEV)
- goto unregister;
+ goto put_unregister;
}
}
}
return 0;
-unregister:
+put_unregister:
of_node_put(child);
+unregister:
mdiobus_unregister(mdio);
return rc;
}
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index afbad1ad8683..08624f073014 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -459,19 +459,34 @@ EXPORT_SYMBOL(of_mdio_find_bus);
* found, set the of_node pointer for the mdio device. This allows
* auto-probed phy devices to be supplied with information passed in
* via DT.
+ * If a PHY package is found, PHY is searched also there.
*/
-static void of_mdiobus_link_mdiodev(struct mii_bus *bus,
- struct mdio_device *mdiodev)
+static int of_mdiobus_find_phy(struct device *dev, struct mdio_device *mdiodev,
+ struct device_node *np)
{
- struct device *dev = &mdiodev->dev;
struct device_node *child;
- if (dev->of_node || !bus->dev.of_node)
- return;
-
- for_each_available_child_of_node(bus->dev.of_node, child) {
+ for_each_available_child_of_node(np, child) {
int addr;
+ if (of_node_name_eq(child, "ethernet-phy-package")) {
+ /* Validate PHY package reg presence */
+ if (!of_property_present(child, "reg")) {
+ of_node_put(child);
+ return -EINVAL;
+ }
+
+ if (!of_mdiobus_find_phy(dev, mdiodev, child)) {
+ /* The refcount for the PHY package will be
+ * incremented later when PHY join the Package.
+ */
+ of_node_put(child);
+ return 0;
+ }
+
+ continue;
+ }
+
addr = of_mdio_parse_addr(dev, child);
if (addr < 0)
continue;
@@ -481,9 +496,22 @@ static void of_mdiobus_link_mdiodev(struct mii_bus *bus,
/* The refcount on "child" is passed to the mdio
* device. Do _not_ use of_node_put(child) here.
*/
- return;
+ return 0;
}
}
+
+ return -ENODEV;
+}
+
+static void of_mdiobus_link_mdiodev(struct mii_bus *bus,
+ struct mdio_device *mdiodev)
+{
+ struct device *dev = &mdiodev->dev;
+
+ if (dev->of_node || !bus->dev.of_node)
+ return;
+
+ of_mdiobus_find_phy(dev, mdiodev, bus->dev.of_node);
}
#else /* !IS_ENABLED(CONFIG_OF_MDIO) */
static inline void of_mdiobus_link_mdiodev(struct mii_bus *mdio,
--
2.43.0
Add devm/of_phy_package_join helper to join PHYs in a PHY package. These
are variant of the manual phy_package_join with the difference that
these will use DT nodes to derive the base_addr instead of manually
passing an hardcoded value.
An additional value is added in phy_package_shared, "np" to reference
the PHY package node pointer in specific PHY driver probe_once and
config_init_once functions to make use of additional specific properties
defined in the PHY package node in DT.
The np value is filled only with of_phy_package_join if a valid PHY
package node is found. A valid PHY package node must have the node name
set to "ethernet-phy-package".
Signed-off-by: Christian Marangi <[email protected]>
---
drivers/net/phy/phy_device.c | 96 ++++++++++++++++++++++++++++++++++++
include/linux/phy.h | 6 +++
2 files changed, 102 insertions(+)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 2eed8f03621d..9014ac3c0fc8 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1708,6 +1708,7 @@ int phy_package_join(struct phy_device *phydev, int base_addr, size_t priv_size)
shared->priv_size = priv_size;
}
shared->base_addr = base_addr;
+ shared->np = NULL;
refcount_set(&shared->refcnt, 1);
bus->shared[base_addr] = shared;
} else {
@@ -1730,6 +1731,63 @@ int phy_package_join(struct phy_device *phydev, int base_addr, size_t priv_size)
}
EXPORT_SYMBOL_GPL(phy_package_join);
+/**
+ * of_phy_package_join - join a common PHY group in PHY package
+ * @phydev: target phy_device struct
+ * @priv_size: if non-zero allocate this amount of bytes for private data
+ *
+ * This is a variant of phy_package_join for PHY package defined in DT.
+ *
+ * The parent node of the @phydev is checked as a valid PHY package node
+ * structure (by matching the node name "ethernet-phy-package") and the
+ * base_addr for the PHY package is passed to phy_package_join.
+ *
+ * With this configuration the shared struct will also have the np value
+ * filled to use additional DT defined properties in PHY specific
+ * probe_once and config_init_once PHY package OPs.
+ *
+ * Returns < 0 on error, 0 on success. Esp. calling phy_package_join()
+ * with the same cookie but a different priv_size is an error. Or a parent
+ * node is not detected or is not valid or doesn't match the expected node
+ * name for PHY package.
+ */
+int of_phy_package_join(struct phy_device *phydev, size_t priv_size)
+{
+ struct device_node *node = phydev->mdio.dev.of_node;
+ struct device_node *package_node;
+ u32 base_addr;
+ int ret;
+
+ if (!node)
+ return -EINVAL;
+
+ package_node = of_get_parent(node);
+ if (!package_node)
+ return -EINVAL;
+
+ if (!of_node_name_eq(package_node, "ethernet-phy-package")) {
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ if (of_property_read_u32(package_node, "reg", &base_addr)) {
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ ret = phy_package_join(phydev, base_addr, priv_size);
+ if (ret)
+ goto exit;
+
+ phydev->shared->np = package_node;
+
+ return 0;
+exit:
+ of_node_put(package_node);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(of_phy_package_join);
+
/**
* phy_package_leave - leave a common PHY group
* @phydev: target phy_device struct
@@ -1746,6 +1804,10 @@ void phy_package_leave(struct phy_device *phydev)
if (!shared)
return;
+ /* Decrease the node refcount on leave if present */
+ if (shared->np)
+ of_node_put(shared->np);
+
if (refcount_dec_and_mutex_lock(&shared->refcnt, &bus->shared_lock)) {
bus->shared[shared->base_addr] = NULL;
mutex_unlock(&bus->shared_lock);
@@ -1798,6 +1860,40 @@ int devm_phy_package_join(struct device *dev, struct phy_device *phydev,
}
EXPORT_SYMBOL_GPL(devm_phy_package_join);
+/**
+ * devm_of_phy_package_join - resource managed of_phy_package_join()
+ * @dev: device that is registering this PHY package
+ * @phydev: target phy_device struct
+ * @priv_size: if non-zero allocate this amount of bytes for private data
+ *
+ * Managed of_phy_package_join(). Shared storage fetched by this function,
+ * phy_package_leave() is automatically called on driver detach. See
+ * of_phy_package_join() for more information.
+ */
+int devm_of_phy_package_join(struct device *dev, struct phy_device *phydev,
+ size_t priv_size)
+{
+ struct phy_device **ptr;
+ int ret;
+
+ ptr = devres_alloc(devm_phy_package_leave, sizeof(*ptr),
+ GFP_KERNEL);
+ if (!ptr)
+ return -ENOMEM;
+
+ ret = of_phy_package_join(phydev, priv_size);
+
+ if (!ret) {
+ *ptr = phydev;
+ devres_add(dev, ptr);
+ } else {
+ devres_free(ptr);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(devm_of_phy_package_join);
+
/**
* phy_detach - detach a PHY device from its network device
* @phydev: target phy_device struct
diff --git a/include/linux/phy.h b/include/linux/phy.h
index ad93f8b1b128..f8ce8a757ed0 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -329,6 +329,7 @@ struct mdio_bus_stats {
* struct phy_package_shared - Shared information in PHY packages
* @base_addr: Base PHY address of PHY package used to combine PHYs
* in one package and for offset calculation of phy_package_read/write
+ * @np: Pointer to the Device Node if PHY package defined in DT
* @refcnt: Number of PHYs connected to this shared data
* @flags: Initialization of PHY package
* @priv_size: Size of the shared private data @priv
@@ -340,6 +341,8 @@ struct mdio_bus_stats {
*/
struct phy_package_shared {
u8 base_addr;
+ /* With PHY package defined in DT this points to the PHY package node */
+ struct device_node *np;
refcount_t refcnt;
unsigned long flags;
size_t priv_size;
@@ -1999,9 +2002,12 @@ int phy_ethtool_set_link_ksettings(struct net_device *ndev,
const struct ethtool_link_ksettings *cmd);
int phy_ethtool_nway_reset(struct net_device *ndev);
int phy_package_join(struct phy_device *phydev, int base_addr, size_t priv_size);
+int of_phy_package_join(struct phy_device *phydev, size_t priv_size);
void phy_package_leave(struct phy_device *phydev);
int devm_phy_package_join(struct device *dev, struct phy_device *phydev,
int base_addr, size_t priv_size);
+int devm_of_phy_package_join(struct device *dev, struct phy_device *phydev,
+ size_t priv_size);
int __init mdio_bus_init(void);
void mdio_bus_exit(void);
--
2.43.0
Move more function to shared library in preparation for introduction of
new PHY Family qca807x that will make use of both functions from at803x
and qca808x as it's a transition PHY with some implementation of at803x
and some from the new qca808x.
Signed-off-by: Christian Marangi <[email protected]>
---
drivers/net/phy/qcom/at803x.c | 35 -----
drivers/net/phy/qcom/qca808x.c | 205 ----------------------------
drivers/net/phy/qcom/qcom-phy-lib.c | 193 ++++++++++++++++++++++++++
drivers/net/phy/qcom/qcom.h | 51 +++++++
4 files changed, 244 insertions(+), 240 deletions(-)
diff --git a/drivers/net/phy/qcom/at803x.c b/drivers/net/phy/qcom/at803x.c
index 36b70e88394e..3e3ee4c1d4bc 100644
--- a/drivers/net/phy/qcom/at803x.c
+++ b/drivers/net/phy/qcom/at803x.c
@@ -504,41 +504,6 @@ static void at803x_link_change_notify(struct phy_device *phydev)
}
}
-static int at803x_read_status(struct phy_device *phydev)
-{
- struct at803x_ss_mask ss_mask = { 0 };
- int err, old_link = phydev->link;
-
- /* Update the link, but return if there was an error */
- err = genphy_update_link(phydev);
- if (err)
- return err;
-
- /* why bother the PHY if nothing can have changed */
- if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
- return 0;
-
- phydev->speed = SPEED_UNKNOWN;
- phydev->duplex = DUPLEX_UNKNOWN;
- phydev->pause = 0;
- phydev->asym_pause = 0;
-
- err = genphy_read_lpa(phydev);
- if (err < 0)
- return err;
-
- ss_mask.speed_mask = AT803X_SS_SPEED_MASK;
- ss_mask.speed_shift = __bf_shf(AT803X_SS_SPEED_MASK);
- err = at803x_read_specific_status(phydev, ss_mask);
- if (err < 0)
- return err;
-
- if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete)
- phy_resolve_aneg_pause(phydev);
-
- return 0;
-}
-
static int at803x_config_aneg(struct phy_device *phydev)
{
struct at803x_priv *priv = phydev->priv;
diff --git a/drivers/net/phy/qcom/qca808x.c b/drivers/net/phy/qcom/qca808x.c
index d88e04278fc4..8377325f157e 100644
--- a/drivers/net/phy/qcom/qca808x.c
+++ b/drivers/net/phy/qcom/qca808x.c
@@ -2,7 +2,6 @@
#include <linux/phy.h>
#include <linux/module.h>
-#include <linux/ethtool_netlink.h>
#include "qcom.h"
@@ -63,55 +62,6 @@
#define QCA808X_DBG_AN_TEST 0xb
#define QCA808X_HIBERNATION_EN BIT(15)
-#define QCA808X_CDT_ENABLE_TEST BIT(15)
-#define QCA808X_CDT_INTER_CHECK_DIS BIT(13)
-#define QCA808X_CDT_STATUS BIT(11)
-#define QCA808X_CDT_LENGTH_UNIT BIT(10)
-
-#define QCA808X_MMD3_CDT_STATUS 0x8064
-#define QCA808X_MMD3_CDT_DIAG_PAIR_A 0x8065
-#define QCA808X_MMD3_CDT_DIAG_PAIR_B 0x8066
-#define QCA808X_MMD3_CDT_DIAG_PAIR_C 0x8067
-#define QCA808X_MMD3_CDT_DIAG_PAIR_D 0x8068
-#define QCA808X_CDT_DIAG_LENGTH_SAME_SHORT GENMASK(15, 8)
-#define QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT GENMASK(7, 0)
-
-#define QCA808X_CDT_CODE_PAIR_A GENMASK(15, 12)
-#define QCA808X_CDT_CODE_PAIR_B GENMASK(11, 8)
-#define QCA808X_CDT_CODE_PAIR_C GENMASK(7, 4)
-#define QCA808X_CDT_CODE_PAIR_D GENMASK(3, 0)
-
-#define QCA808X_CDT_STATUS_STAT_TYPE GENMASK(1, 0)
-#define QCA808X_CDT_STATUS_STAT_FAIL FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 0)
-#define QCA808X_CDT_STATUS_STAT_NORMAL FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 1)
-#define QCA808X_CDT_STATUS_STAT_SAME_OPEN FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 2)
-#define QCA808X_CDT_STATUS_STAT_SAME_SHORT FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 3)
-
-#define QCA808X_CDT_STATUS_STAT_MDI GENMASK(3, 2)
-#define QCA808X_CDT_STATUS_STAT_MDI1 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 1)
-#define QCA808X_CDT_STATUS_STAT_MDI2 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 2)
-#define QCA808X_CDT_STATUS_STAT_MDI3 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 3)
-
-/* NORMAL are MDI with type set to 0 */
-#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI1
-#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
- QCA808X_CDT_STATUS_STAT_MDI1)
-#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
- QCA808X_CDT_STATUS_STAT_MDI1)
-#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI2
-#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
- QCA808X_CDT_STATUS_STAT_MDI2)
-#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
- QCA808X_CDT_STATUS_STAT_MDI2)
-#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI3
-#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
- QCA808X_CDT_STATUS_STAT_MDI3)
-#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
- QCA808X_CDT_STATUS_STAT_MDI3)
-
-/* Added for reference of existence but should be handled by wait_for_completion already */
-#define QCA808X_CDT_STATUS_STAT_BUSY (BIT(1) | BIT(3))
-
#define QCA808X_MMD7_LED_GLOBAL 0x8073
#define QCA808X_LED_BLINK_1 GENMASK(11, 6)
#define QCA808X_LED_BLINK_2 GENMASK(5, 0)
@@ -406,86 +356,6 @@ static int qca808x_soft_reset(struct phy_device *phydev)
return ret;
}
-static bool qca808x_cdt_fault_length_valid(int cdt_code)
-{
- switch (cdt_code) {
- case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
- case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
- case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
- case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
- case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
- case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
- case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
- case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
- case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
- case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
- case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
- return true;
- default:
- return false;
- }
-}
-
-static int qca808x_cable_test_result_trans(int cdt_code)
-{
- switch (cdt_code) {
- case QCA808X_CDT_STATUS_STAT_NORMAL:
- return ETHTOOL_A_CABLE_RESULT_CODE_OK;
- case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
- return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
- case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
- return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
- case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
- case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
- case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
- case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
- case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
- case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
- case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
- case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
- case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
- return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT;
- case QCA808X_CDT_STATUS_STAT_FAIL:
- default:
- return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
- }
-}
-
-static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair,
- int result)
-{
- int val;
- u32 cdt_length_reg = 0;
-
- switch (pair) {
- case ETHTOOL_A_CABLE_PAIR_A:
- cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_A;
- break;
- case ETHTOOL_A_CABLE_PAIR_B:
- cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_B;
- break;
- case ETHTOOL_A_CABLE_PAIR_C:
- cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_C;
- break;
- case ETHTOOL_A_CABLE_PAIR_D:
- cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_D;
- break;
- default:
- return -EINVAL;
- }
-
- val = phy_read_mmd(phydev, MDIO_MMD_PCS, cdt_length_reg);
- if (val < 0)
- return val;
-
- if (result == ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT)
- val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_SAME_SHORT, val);
- else
- val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT, val);
-
- return at803x_cdt_fault_length(val);
-}
-
static int qca808x_cable_test_start(struct phy_device *phydev)
{
int ret;
@@ -527,81 +397,6 @@ static int qca808x_cable_test_start(struct phy_device *phydev)
return 0;
}
-static int qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pair,
- u16 status)
-{
- int length, result;
- u16 pair_code;
-
- switch (pair) {
- case ETHTOOL_A_CABLE_PAIR_A:
- pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, status);
- break;
- case ETHTOOL_A_CABLE_PAIR_B:
- pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, status);
- break;
- case ETHTOOL_A_CABLE_PAIR_C:
- pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, status);
- break;
- case ETHTOOL_A_CABLE_PAIR_D:
- pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, status);
- break;
- default:
- return -EINVAL;
- }
-
- result = qca808x_cable_test_result_trans(pair_code);
- ethnl_cable_test_result(phydev, pair, result);
-
- if (qca808x_cdt_fault_length_valid(pair_code)) {
- length = qca808x_cdt_fault_length(phydev, pair, result);
- ethnl_cable_test_fault_length(phydev, pair, length);
- }
-
- return 0;
-}
-
-static int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished)
-{
- int ret, val;
-
- *finished = false;
-
- val = QCA808X_CDT_ENABLE_TEST |
- QCA808X_CDT_LENGTH_UNIT;
- ret = at803x_cdt_start(phydev, val);
- if (ret)
- return ret;
-
- ret = at803x_cdt_wait_for_completion(phydev, QCA808X_CDT_ENABLE_TEST);
- if (ret)
- return ret;
-
- val = phy_read_mmd(phydev, MDIO_MMD_PCS, QCA808X_MMD3_CDT_STATUS);
- if (val < 0)
- return val;
-
- ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_A, val);
- if (ret)
- return ret;
-
- ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_B, val);
- if (ret)
- return ret;
-
- ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_C, val);
- if (ret)
- return ret;
-
- ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_D, val);
- if (ret)
- return ret;
-
- *finished = true;
-
- return 0;
-}
-
static int qca808x_get_features(struct phy_device *phydev)
{
int ret;
diff --git a/drivers/net/phy/qcom/qcom-phy-lib.c b/drivers/net/phy/qcom/qcom-phy-lib.c
index e0295d4b4a51..786bfc39912c 100644
--- a/drivers/net/phy/qcom/qcom-phy-lib.c
+++ b/drivers/net/phy/qcom/qcom-phy-lib.c
@@ -5,6 +5,7 @@
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/ethtool_netlink.h>
#include "qcom.h"
@@ -311,6 +312,42 @@ int at803x_prepare_config_aneg(struct phy_device *phydev)
}
EXPORT_SYMBOL_GPL(at803x_prepare_config_aneg);
+int at803x_read_status(struct phy_device *phydev)
+{
+ struct at803x_ss_mask ss_mask = { 0 };
+ int err, old_link = phydev->link;
+
+ /* Update the link, but return if there was an error */
+ err = genphy_update_link(phydev);
+ if (err)
+ return err;
+
+ /* why bother the PHY if nothing can have changed */
+ if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
+ return 0;
+
+ phydev->speed = SPEED_UNKNOWN;
+ phydev->duplex = DUPLEX_UNKNOWN;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
+
+ err = genphy_read_lpa(phydev);
+ if (err < 0)
+ return err;
+
+ ss_mask.speed_mask = AT803X_SS_SPEED_MASK;
+ ss_mask.speed_shift = __bf_shf(AT803X_SS_SPEED_MASK);
+ err = at803x_read_specific_status(phydev, ss_mask);
+ if (err < 0)
+ return err;
+
+ if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete)
+ phy_resolve_aneg_pause(phydev);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(at803x_read_status);
+
static int at803x_get_downshift(struct phy_device *phydev, u8 *d)
{
int val;
@@ -427,3 +464,159 @@ int at803x_cdt_wait_for_completion(struct phy_device *phydev,
return ret < 0 ? ret : 0;
}
EXPORT_SYMBOL_GPL(at803x_cdt_wait_for_completion);
+
+static bool qca808x_cdt_fault_length_valid(int cdt_code)
+{
+ switch (cdt_code) {
+ case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
+ case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static int qca808x_cable_test_result_trans(int cdt_code)
+{
+ switch (cdt_code) {
+ case QCA808X_CDT_STATUS_STAT_NORMAL:
+ return ETHTOOL_A_CABLE_RESULT_CODE_OK;
+ case QCA808X_CDT_STATUS_STAT_SAME_SHORT:
+ return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
+ case QCA808X_CDT_STATUS_STAT_SAME_OPEN:
+ return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
+ case QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
+ return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT;
+ case QCA808X_CDT_STATUS_STAT_FAIL:
+ default:
+ return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
+ }
+}
+
+static int qca808x_cdt_fault_length(struct phy_device *phydev, int pair,
+ int result)
+{
+ int val;
+ u32 cdt_length_reg = 0;
+
+ switch (pair) {
+ case ETHTOOL_A_CABLE_PAIR_A:
+ cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_A;
+ break;
+ case ETHTOOL_A_CABLE_PAIR_B:
+ cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_B;
+ break;
+ case ETHTOOL_A_CABLE_PAIR_C:
+ cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_C;
+ break;
+ case ETHTOOL_A_CABLE_PAIR_D:
+ cdt_length_reg = QCA808X_MMD3_CDT_DIAG_PAIR_D;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ val = phy_read_mmd(phydev, MDIO_MMD_PCS, cdt_length_reg);
+ if (val < 0)
+ return val;
+
+ if (result == ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT)
+ val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_SAME_SHORT, val);
+ else
+ val = FIELD_GET(QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT, val);
+
+ return at803x_cdt_fault_length(val);
+}
+
+static int qca808x_cable_test_get_pair_status(struct phy_device *phydev, u8 pair,
+ u16 status)
+{
+ int length, result;
+ u16 pair_code;
+
+ switch (pair) {
+ case ETHTOOL_A_CABLE_PAIR_A:
+ pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_A, status);
+ break;
+ case ETHTOOL_A_CABLE_PAIR_B:
+ pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_B, status);
+ break;
+ case ETHTOOL_A_CABLE_PAIR_C:
+ pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_C, status);
+ break;
+ case ETHTOOL_A_CABLE_PAIR_D:
+ pair_code = FIELD_GET(QCA808X_CDT_CODE_PAIR_D, status);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ result = qca808x_cable_test_result_trans(pair_code);
+ ethnl_cable_test_result(phydev, pair, result);
+
+ if (qca808x_cdt_fault_length_valid(pair_code)) {
+ length = qca808x_cdt_fault_length(phydev, pair, result);
+ ethnl_cable_test_fault_length(phydev, pair, length);
+ }
+
+ return 0;
+}
+
+int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished)
+{
+ int ret, val;
+
+ *finished = false;
+
+ val = QCA808X_CDT_ENABLE_TEST |
+ QCA808X_CDT_LENGTH_UNIT;
+ ret = at803x_cdt_start(phydev, val);
+ if (ret)
+ return ret;
+
+ ret = at803x_cdt_wait_for_completion(phydev, QCA808X_CDT_ENABLE_TEST);
+ if (ret)
+ return ret;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_PCS, QCA808X_MMD3_CDT_STATUS);
+ if (val < 0)
+ return val;
+
+ ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_A, val);
+ if (ret)
+ return ret;
+
+ ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_B, val);
+ if (ret)
+ return ret;
+
+ ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_C, val);
+ if (ret)
+ return ret;
+
+ ret = qca808x_cable_test_get_pair_status(phydev, ETHTOOL_A_CABLE_PAIR_D, val);
+ if (ret)
+ return ret;
+
+ *finished = true;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qca808x_cable_test_get_status);
diff --git a/drivers/net/phy/qcom/qcom.h b/drivers/net/phy/qcom/qcom.h
index c127d8f50f0f..dc259bbf0678 100644
--- a/drivers/net/phy/qcom/qcom.h
+++ b/drivers/net/phy/qcom/qcom.h
@@ -54,6 +54,55 @@
#define AT803X_CDT_STATUS_STAT_MASK GENMASK(9, 8)
#define AT803X_CDT_STATUS_DELTA_TIME_MASK GENMASK(7, 0)
+#define QCA808X_CDT_ENABLE_TEST BIT(15)
+#define QCA808X_CDT_INTER_CHECK_DIS BIT(13)
+#define QCA808X_CDT_STATUS BIT(11)
+#define QCA808X_CDT_LENGTH_UNIT BIT(10)
+
+#define QCA808X_MMD3_CDT_STATUS 0x8064
+#define QCA808X_MMD3_CDT_DIAG_PAIR_A 0x8065
+#define QCA808X_MMD3_CDT_DIAG_PAIR_B 0x8066
+#define QCA808X_MMD3_CDT_DIAG_PAIR_C 0x8067
+#define QCA808X_MMD3_CDT_DIAG_PAIR_D 0x8068
+#define QCA808X_CDT_DIAG_LENGTH_SAME_SHORT GENMASK(15, 8)
+#define QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT GENMASK(7, 0)
+
+#define QCA808X_CDT_CODE_PAIR_A GENMASK(15, 12)
+#define QCA808X_CDT_CODE_PAIR_B GENMASK(11, 8)
+#define QCA808X_CDT_CODE_PAIR_C GENMASK(7, 4)
+#define QCA808X_CDT_CODE_PAIR_D GENMASK(3, 0)
+
+#define QCA808X_CDT_STATUS_STAT_TYPE GENMASK(1, 0)
+#define QCA808X_CDT_STATUS_STAT_FAIL FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 0)
+#define QCA808X_CDT_STATUS_STAT_NORMAL FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 1)
+#define QCA808X_CDT_STATUS_STAT_SAME_OPEN FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 2)
+#define QCA808X_CDT_STATUS_STAT_SAME_SHORT FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 3)
+
+#define QCA808X_CDT_STATUS_STAT_MDI GENMASK(3, 2)
+#define QCA808X_CDT_STATUS_STAT_MDI1 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 1)
+#define QCA808X_CDT_STATUS_STAT_MDI2 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 2)
+#define QCA808X_CDT_STATUS_STAT_MDI3 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 3)
+
+/* NORMAL are MDI with type set to 0 */
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI1
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
+ QCA808X_CDT_STATUS_STAT_MDI1)
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
+ QCA808X_CDT_STATUS_STAT_MDI1)
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI2
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
+ QCA808X_CDT_STATUS_STAT_MDI2)
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
+ QCA808X_CDT_STATUS_STAT_MDI2)
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI3
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\
+ QCA808X_CDT_STATUS_STAT_MDI3)
+#define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\
+ QCA808X_CDT_STATUS_STAT_MDI3)
+
+/* Added for reference of existence but should be handled by wait_for_completion already */
+#define QCA808X_CDT_STATUS_STAT_BUSY (BIT(1) | BIT(3))
+
#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C
#define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B
#define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A
@@ -110,6 +159,7 @@ int at803x_read_specific_status(struct phy_device *phydev,
struct at803x_ss_mask ss_mask);
int at803x_config_mdix(struct phy_device *phydev, u8 ctrl);
int at803x_prepare_config_aneg(struct phy_device *phydev);
+int at803x_read_status(struct phy_device *phydev);
int at803x_get_tunable(struct phy_device *phydev,
struct ethtool_tunable *tuna, void *data);
int at803x_set_tunable(struct phy_device *phydev,
@@ -118,3 +168,4 @@ int at803x_cdt_fault_length(int dt);
int at803x_cdt_start(struct phy_device *phydev, u32 cdt_start);
int at803x_cdt_wait_for_completion(struct phy_device *phydev,
u32 cdt_en);
+int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished);
--
2.43.0
Document Qcom QCA807x PHY package.
Qualcomm QCA807X Ethernet PHY is PHY package of 2 or 5
IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and
1000BASE-T PHY-s.
Document the required property to make the PHY package correctly
configure and work.
Signed-off-by: Christian Marangi <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
---
.../devicetree/bindings/net/qcom,qca807x.yaml | 184 ++++++++++++++++++
1 file changed, 184 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/qcom,qca807x.yaml
diff --git a/Documentation/devicetree/bindings/net/qcom,qca807x.yaml b/Documentation/devicetree/bindings/net/qcom,qca807x.yaml
new file mode 100644
index 000000000000..7290024024f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom,qca807x.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qcom,qca807x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QCA807x Ethernet PHY
+
+maintainers:
+ - Christian Marangi <[email protected]>
+ - Robert Marko <[email protected]>
+
+description: |
+ Qualcomm QCA8072/5 Ethernet PHY is PHY package of 2 or 5
+ IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and
+ 1000BASE-T PHY-s.
+
+ They feature 2 SerDes, one for PSGMII or QSGMII connection with
+ MAC, while second one is SGMII for connection to MAC or fiber.
+
+ Both models have a combo port that supports 1000BASE-X and
+ 100BASE-FX fiber.
+
+ Each PHY inside of QCA807x series has 4 digitally controlled
+ output only pins that natively drive LED-s for up to 2 attached
+ LEDs. Some vendor also use these 4 output for GPIO usage without
+ attaching LEDs.
+
+ Note that output pins can be set to drive LEDs OR GPIO, mixed
+ definition are not accepted.
+
+$ref: ethernet-phy-package.yaml#
+
+properties:
+ compatible:
+ enum:
+ - qcom,qca8072-package
+ - qcom,qca8075-package
+
+ qcom,package-mode:
+ description: |
+ PHY package can be configured in 3 mode following this table:
+
+ First Serdes mode Second Serdes mode
+ Option 1 PSGMII for copper Disabled
+ ports 0-4
+ Option 2 PSGMII for copper 1000BASE-X / 100BASE-FX
+ ports 0-4
+ Option 3 QSGMII for copper SGMII for
+ ports 0-3 copper port 4
+
+ PSGMII mode (option 1 or 2) is configured dynamically based on
+ the presence of a connected SFP device.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum:
+ - qsgmii
+ - psgmii
+ default: psgmii
+
+ qcom,tx-drive-strength-milliwatt:
+ description: set the TX Amplifier value in mv.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [140, 160, 180, 200, 220,
+ 240, 260, 280, 300, 320,
+ 400, 500, 600]
+ default: 600
+
+patternProperties:
+ ^ethernet-phy@[a-f0-9]+$:
+ $ref: ethernet-phy.yaml#
+
+ properties:
+ qcom,dac-full-amplitude:
+ description:
+ Set Analog MDI driver amplitude to FULL.
+
+ With this not defined, amplitude is set to DSP.
+ (amplitude is adjusted based on cable length)
+
+ With this enabled and qcom,dac-full-bias-current
+ and qcom,dac-disable-bias-current-tweak disabled,
+ bias current is half.
+ type: boolean
+
+ qcom,dac-full-bias-current:
+ description:
+ Set Analog MDI driver bias current to FULL.
+
+ With this not defined, bias current is set to DSP.
+ (bias current is adjusted based on cable length)
+
+ Actual bias current might be different with
+ qcom,dac-disable-bias-current-tweak disabled.
+ type: boolean
+
+ qcom,dac-disable-bias-current-tweak:
+ description: |
+ Set Analog MDI driver bias current to disable tweak
+ to bias current.
+
+ With this not defined, bias current tweak are enabled
+ by default.
+
+ With this enabled the following tweak are NOT applied:
+ - With both FULL amplitude and FULL bias current: bias current
+ is set to half.
+ - With only DSP amplitude: bias current is set to half and
+ is set to 1/4 with cable < 10m.
+ - With DSP bias current (included both DSP amplitude and
+ DSP bias current): bias current is half the detected current
+ with cable < 10m.
+ type: boolean
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ if:
+ required:
+ - gpio-controller
+ then:
+ properties:
+ leds: false
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/leds/common.h>
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy-package@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "qcom,qca8075-package";
+ reg = <0>;
+
+ qcom,package-mode = "qsgmii";
+
+ ethernet-phy@0 {
+ reg = <0>;
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ default-state = "keep";
+ };
+ };
+ };
+
+ ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethernet-phy@2 {
+ reg = <2>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ ethernet-phy@3 {
+ reg = <3>;
+ };
+
+ ethernet-phy@4 {
+ reg = <4>;
+ };
+ };
+ };
--
2.43.0
Some PHY driver might require additional regs call after
genphy_c37_read_status() is called.
Expand genphy_c37_read_status to provide a bool wheather the link has
changed or not to permit PHY driver to skip additional regs call if
nothing has changed.
Every user of genphy_c37_read_status() is updated with the new
additional bool.
Signed-off-by: Christian Marangi <[email protected]>
---
drivers/net/phy/broadcom.c | 3 ++-
drivers/net/phy/phy_device.c | 11 +++++++++--
drivers/net/phy/qcom/at803x.c | 3 ++-
include/linux/phy.h | 2 +-
4 files changed, 14 insertions(+), 5 deletions(-)
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 312a8bb35d78..370e4ed45098 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -665,10 +665,11 @@ static int bcm54616s_config_aneg(struct phy_device *phydev)
static int bcm54616s_read_status(struct phy_device *phydev)
{
struct bcm54616s_phy_priv *priv = phydev->priv;
+ bool changed;
int err;
if (priv->mode_1000bx_en)
- err = genphy_c37_read_status(phydev);
+ err = genphy_c37_read_status(phydev, &changed);
else
err = genphy_read_status(phydev);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 9014ac3c0fc8..861b09cff3f7 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -2617,12 +2617,15 @@ EXPORT_SYMBOL(genphy_read_status);
/**
* genphy_c37_read_status - check the link status and update current link state
* @phydev: target phy_device struct
+ * @changed: pointer where to store if link changed
*
* Description: Check the link, then figure out the current state
* by comparing what we advertise with what the link partner
* advertises. This function is for Clause 37 1000Base-X mode.
+ *
+ * If link has changed, @changed is set to true, false otherwise.
*/
-int genphy_c37_read_status(struct phy_device *phydev)
+int genphy_c37_read_status(struct phy_device *phydev, bool *changed)
{
int lpa, err, old_link = phydev->link;
@@ -2632,9 +2635,13 @@ int genphy_c37_read_status(struct phy_device *phydev)
return err;
/* why bother the PHY if nothing can have changed */
- if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
+ if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link) {
+ *changed = false;
return 0;
+ }
+ /* Signal link has changed */
+ *changed = true;
phydev->duplex = DUPLEX_UNKNOWN;
phydev->pause = 0;
phydev->asym_pause = 0;
diff --git a/drivers/net/phy/qcom/at803x.c b/drivers/net/phy/qcom/at803x.c
index 3e3ee4c1d4bc..4717c59d51d0 100644
--- a/drivers/net/phy/qcom/at803x.c
+++ b/drivers/net/phy/qcom/at803x.c
@@ -912,9 +912,10 @@ static int at8031_config_intr(struct phy_device *phydev)
static int at8031_read_status(struct phy_device *phydev)
{
struct at803x_priv *priv = phydev->priv;
+ bool changed;
if (priv->is_1000basex)
- return genphy_c37_read_status(phydev);
+ return genphy_c37_read_status(phydev, &changed);
return at803x_read_status(phydev);
}
diff --git a/include/linux/phy.h b/include/linux/phy.h
index f8ce8a757ed0..e9aaa0dfe675 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1876,7 +1876,7 @@ int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum,
/* Clause 37 */
int genphy_c37_config_aneg(struct phy_device *phydev);
-int genphy_c37_read_status(struct phy_device *phydev);
+int genphy_c37_read_status(struct phy_device *phydev, bool *changed);
/* Clause 45 PHY */
int genphy_c45_restart_aneg(struct phy_device *phydev);
--
2.43.0
From: Robert Marko <[email protected]>
This adds driver for the Qualcomm QCA8072 and QCA8075 PHY-s.
They are 2 or 5 port IEEE 802.3 clause 22 compliant 10BASE-Te,
100BASE-TX and 1000BASE-T PHY-s.
They feature 2 SerDes, one for PSGMII or QSGMII connection with
MAC, while second one is SGMII for connection to MAC or fiber.
Both models have a combo port that supports 1000BASE-X and
100BASE-FX fiber.
PHY package can be configured in 3 mode following this table:
First Serdes mode Second Serdes mode
Option 1 PSGMII for copper Disabled
ports 0-4
Option 2 PSGMII for copper 1000BASE-X / 100BASE-FX
ports 0-4
Option 3 QSGMII for copper SGMII for
ports 0-3 copper port 4
Each PHY inside of QCA807x series has 4 digitally controlled
output only pins that natively drive LED-s.
But some vendors used these to driver generic LED-s controlled
by userspace, so lets enable registering each PHY as GPIO
controller and add driver for it.
These are commonly used in Qualcomm IPQ40xx, IPQ60xx and IPQ807x
boards.
Co-developed-by: Christian Marangi <[email protected]>
Signed-off-by: Robert Marko <[email protected]>
Signed-off-by: Christian Marangi <[email protected]>
---
drivers/net/phy/qcom/Kconfig | 8 +
drivers/net/phy/qcom/Makefile | 1 +
drivers/net/phy/qcom/qca807x.c | 597 +++++++++++++++++++++++++++++++++
3 files changed, 606 insertions(+)
create mode 100644 drivers/net/phy/qcom/qca807x.c
diff --git a/drivers/net/phy/qcom/Kconfig b/drivers/net/phy/qcom/Kconfig
index 80db24deb689..570626cc8e14 100644
--- a/drivers/net/phy/qcom/Kconfig
+++ b/drivers/net/phy/qcom/Kconfig
@@ -20,3 +20,11 @@ config QCA808X_PHY
select QCOM_NET_PHYLIB
help
Currently supports the QCA8081 model
+
+config QCA807X_PHY
+ tristate "Qualcomm QCA807x PHYs"
+ select QCOM_NET_PHYLIB
+ depends on OF_MDIO
+ help
+ Currently supports the Qualcomm QCA8072, QCA8075 and the PSGMII
+ control PHY.
diff --git a/drivers/net/phy/qcom/Makefile b/drivers/net/phy/qcom/Makefile
index 0362d7ed47be..f24fb550babd 100644
--- a/drivers/net/phy/qcom/Makefile
+++ b/drivers/net/phy/qcom/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_QCOM_NET_PHYLIB) += qcom-phy-lib.o
obj-$(CONFIG_AT803X_PHY) += at803x.o
obj-$(CONFIG_QCA83XX_PHY) += qca83xx.o
obj-$(CONFIG_QCA808X_PHY) += qca808x.o
+obj-$(CONFIG_QCA807X_PHY) += qca807x.o
diff --git a/drivers/net/phy/qcom/qca807x.c b/drivers/net/phy/qcom/qca807x.c
new file mode 100644
index 000000000000..43fc9cddd975
--- /dev/null
+++ b/drivers/net/phy/qcom/qca807x.c
@@ -0,0 +1,597 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2023 Sartura Ltd.
+ *
+ * Author: Robert Marko <[email protected]>
+ * Christian Marangi <[email protected]>
+ *
+ * Qualcomm QCA8072 and QCA8075 PHY driver
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/bitfield.h>
+#include <linux/gpio/driver.h>
+#include <linux/sfp.h>
+
+#include "qcom.h"
+
+#define QCA807X_CHIP_CONFIGURATION 0x1f
+#define QCA807X_BT_BX_REG_SEL BIT(15)
+#define QCA807X_BT_BX_REG_SEL_FIBER 0
+#define QCA807X_BT_BX_REG_SEL_COPPER 1
+#define QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK GENMASK(3, 0)
+#define QCA807X_CHIP_CONFIGURATION_MODE_QSGMII_SGMII 4
+#define QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_FIBER 3
+#define QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_ALL_COPPER 0
+
+#define QCA807X_MEDIA_SELECT_STATUS 0x1a
+#define QCA807X_MEDIA_DETECTED_COPPER BIT(5)
+#define QCA807X_MEDIA_DETECTED_1000_BASE_X BIT(4)
+#define QCA807X_MEDIA_DETECTED_100_BASE_FX BIT(3)
+
+#define QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION 0x807e
+#define QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION_EN BIT(0)
+
+#define QCA807X_MMD7_1000BASE_T_POWER_SAVE_PER_CABLE_LENGTH 0x801a
+#define QCA807X_CONTROL_DAC_MASK GENMASK(2, 0)
+/* List of tweaks enabled by this bit:
+ * - With both FULL amplitude and FULL bias current: bias current
+ * is set to half.
+ * - With only DSP amplitude: bias current is set to half and
+ * is set to 1/4 with cable < 10m.
+ * - With DSP bias current (included both DSP amplitude and
+ * DSP bias current): bias current is half the detected current
+ * with cable < 10m.
+ */
+#define QCA807X_CONTROL_DAC_BIAS_CURRENT_TWEAK BIT(2)
+#define QCA807X_CONTROL_DAC_DSP_BIAS_CURRENT BIT(1)
+#define QCA807X_CONTROL_DAC_DSP_AMPLITUDE BIT(0)
+
+#define QCA807X_MMD7_LED_100N_1 0x8074
+#define QCA807X_MMD7_LED_100N_2 0x8075
+#define QCA807X_MMD7_LED_1000N_1 0x8076
+#define QCA807X_MMD7_LED_1000N_2 0x8077
+
+#define QCA807X_MMD7_LED_CTRL(x) (0x8074 + ((x) * 2))
+#define QCA807X_MMD7_LED_FORCE_CTRL(x) (0x8075 + ((x) * 2))
+
+#define QCA807X_GPIO_FORCE_EN BIT(15)
+#define QCA807X_GPIO_FORCE_MODE_MASK GENMASK(14, 13)
+
+#define QCA807X_FUNCTION_CONTROL 0x10
+#define QCA807X_FC_MDI_CROSSOVER_MODE_MASK GENMASK(6, 5)
+#define QCA807X_FC_MDI_CROSSOVER_AUTO 3
+#define QCA807X_FC_MDI_CROSSOVER_MANUAL_MDIX 1
+#define QCA807X_FC_MDI_CROSSOVER_MANUAL_MDI 0
+
+/* PQSGMII Analog PHY specific */
+#define PQSGMII_CTRL_REG 0x0
+#define PQSGMII_ANALOG_SW_RESET BIT(6)
+#define PQSGMII_DRIVE_CONTROL_1 0xb
+#define PQSGMII_TX_DRIVER_MASK GENMASK(7, 4)
+#define PQSGMII_TX_DRIVER_140MV 0x0
+#define PQSGMII_TX_DRIVER_160MV 0x1
+#define PQSGMII_TX_DRIVER_180MV 0x2
+#define PQSGMII_TX_DRIVER_200MV 0x3
+#define PQSGMII_TX_DRIVER_220MV 0x4
+#define PQSGMII_TX_DRIVER_240MV 0x5
+#define PQSGMII_TX_DRIVER_260MV 0x6
+#define PQSGMII_TX_DRIVER_280MV 0x7
+#define PQSGMII_TX_DRIVER_300MV 0x8
+#define PQSGMII_TX_DRIVER_320MV 0x9
+#define PQSGMII_TX_DRIVER_400MV 0xa
+#define PQSGMII_TX_DRIVER_500MV 0xb
+#define PQSGMII_TX_DRIVER_600MV 0xc
+#define PQSGMII_MODE_CTRL 0x6d
+#define PQSGMII_MODE_CTRL_AZ_WORKAROUND_MASK BIT(0)
+#define PQSGMII_MMD3_SERDES_CONTROL 0x805a
+
+#define PHY_ID_QCA8072 0x004dd0b2
+#define PHY_ID_QCA8075 0x004dd0b1
+
+#define QCA807X_COMBO_ADDR_OFFSET 4
+#define QCA807X_PQSGMII_ADDR_OFFSET 5
+#define SERDES_RESET_SLEEP 100
+
+enum qca807x_global_phy {
+ QCA807X_COMBO_ADDR = 4,
+ QCA807X_PQSGMII_ADDR = 5,
+};
+
+struct qca807x_shared_priv {
+ unsigned int package_mode;
+ u32 tx_drive_strength;
+};
+
+struct qca807x_gpio_priv {
+ struct phy_device *phy;
+};
+
+struct qca807x_priv {
+ bool dac_full_amplitude;
+ bool dac_full_bias_current;
+ bool dac_disable_bias_current_tweak;
+};
+
+static int qca807x_cable_test_start(struct phy_device *phydev)
+{
+ /* we do all the (time consuming) work later */
+ return 0;
+}
+
+#ifdef CONFIG_GPIOLIB
+static int qca807x_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
+{
+ return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int qca807x_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+ struct qca807x_gpio_priv *priv = gpiochip_get_data(gc);
+ u16 reg;
+ int val;
+
+ reg = QCA807X_MMD7_LED_FORCE_CTRL(offset);
+ val = phy_read_mmd(priv->phy, MDIO_MMD_AN, reg);
+
+ return FIELD_GET(QCA807X_GPIO_FORCE_MODE_MASK, val);
+}
+
+static void qca807x_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
+{
+ struct qca807x_gpio_priv *priv = gpiochip_get_data(gc);
+ u16 reg;
+ int val;
+
+ reg = QCA807X_MMD7_LED_FORCE_CTRL(offset);
+
+ val = phy_read_mmd(priv->phy, MDIO_MMD_AN, reg);
+ val &= ~QCA807X_GPIO_FORCE_MODE_MASK;
+ val |= QCA807X_GPIO_FORCE_EN;
+ val |= FIELD_PREP(QCA807X_GPIO_FORCE_MODE_MASK, value);
+
+ phy_write_mmd(priv->phy, MDIO_MMD_AN, reg, val);
+}
+
+static int qca807x_gpio_dir_out(struct gpio_chip *gc, unsigned int offset, int value)
+{
+ qca807x_gpio_set(gc, offset, value);
+
+ return 0;
+}
+
+static int qca807x_gpio(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->mdio.dev;
+ struct qca807x_gpio_priv *priv;
+ struct gpio_chip *gc;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->phy = phydev;
+
+ gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL);
+ if (!gc)
+ return -ENOMEM;
+
+ gc->label = dev_name(dev);
+ gc->base = -1;
+ gc->ngpio = 2;
+ gc->parent = dev;
+ gc->owner = THIS_MODULE;
+ gc->can_sleep = true;
+ gc->get_direction = qca807x_gpio_get_direction;
+ gc->direction_output = qca807x_gpio_dir_out;
+ gc->get = qca807x_gpio_get;
+ gc->set = qca807x_gpio_set;
+
+ return devm_gpiochip_add_data(dev, gc, priv);
+}
+#endif
+
+static int qca807x_read_fiber_status(struct phy_device *phydev)
+{
+ bool changed;
+ int ss, err;
+
+ err = genphy_c37_read_status(phydev, &changed);
+ if (err || !changed)
+ return err;
+
+ /* Read the QCA807x PHY-Specific Status register fiber page,
+ * which indicates the speed and duplex that the PHY is actually
+ * using, irrespective of whether we are in autoneg mode or not.
+ */
+ ss = phy_read(phydev, AT803X_SPECIFIC_STATUS);
+ if (ss < 0)
+ return ss;
+
+ phydev->speed = SPEED_UNKNOWN;
+ phydev->duplex = DUPLEX_UNKNOWN;
+ if (ss & AT803X_SS_SPEED_DUPLEX_RESOLVED) {
+ switch (FIELD_GET(AT803X_SS_SPEED_MASK, ss)) {
+ case AT803X_SS_SPEED_100:
+ phydev->speed = SPEED_100;
+ break;
+ case AT803X_SS_SPEED_1000:
+ phydev->speed = SPEED_1000;
+ break;
+ }
+
+ if (ss & AT803X_SS_DUPLEX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+ }
+
+ return 0;
+}
+
+static int qca807x_read_status(struct phy_device *phydev)
+{
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported)) {
+ switch (phydev->port) {
+ case PORT_FIBRE:
+ return qca807x_read_fiber_status(phydev);
+ case PORT_TP:
+ return at803x_read_status(phydev);
+ default:
+ return -EINVAL;
+ }
+ }
+
+ return at803x_read_status(phydev);
+}
+
+static int qca807x_phy_package_probe_once(struct phy_device *phydev)
+{
+ struct phy_package_shared *shared = phydev->shared;
+ struct qca807x_shared_priv *priv = shared->priv;
+ unsigned int tx_drive_strength;
+ const char *package_mode_name;
+
+ /* Default to 600mw if not defined */
+ if (of_property_read_u32(shared->np, "qcom,tx-drive-strength-milliwatt",
+ &tx_drive_strength))
+ tx_drive_strength = 600;
+
+ switch (tx_drive_strength) {
+ case 140:
+ priv->tx_drive_strength = PQSGMII_TX_DRIVER_140MV;
+ break;
+ case 160:
+ priv->tx_drive_strength = PQSGMII_TX_DRIVER_160MV;
+ break;
+ case 180:
+ priv->tx_drive_strength = PQSGMII_TX_DRIVER_180MV;
+ break;
+ case 200:
+ priv->tx_drive_strength = PQSGMII_TX_DRIVER_200MV;
+ break;
+ case 220:
+ priv->tx_drive_strength = PQSGMII_TX_DRIVER_220MV;
+ break;
+ case 240:
+ priv->tx_drive_strength = PQSGMII_TX_DRIVER_240MV;
+ break;
+ case 260:
+ priv->tx_drive_strength = PQSGMII_TX_DRIVER_260MV;
+ break;
+ case 280:
+ priv->tx_drive_strength = PQSGMII_TX_DRIVER_280MV;
+ break;
+ case 300:
+ priv->tx_drive_strength = PQSGMII_TX_DRIVER_300MV;
+ break;
+ case 320:
+ priv->tx_drive_strength = PQSGMII_TX_DRIVER_320MV;
+ break;
+ case 400:
+ priv->tx_drive_strength = PQSGMII_TX_DRIVER_400MV;
+ break;
+ case 500:
+ priv->tx_drive_strength = PQSGMII_TX_DRIVER_500MV;
+ break;
+ case 600:
+ priv->tx_drive_strength = PQSGMII_TX_DRIVER_600MV;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ priv->package_mode = PHY_INTERFACE_MODE_NA;
+ if (!of_property_read_string(shared->np, "qcom,package-mode",
+ &package_mode_name)) {
+ if (!strcasecmp(package_mode_name,
+ phy_modes(PHY_INTERFACE_MODE_PSGMII)))
+ priv->package_mode = PHY_INTERFACE_MODE_PSGMII;
+ else if (!strcasecmp(package_mode_name,
+ phy_modes(PHY_INTERFACE_MODE_QSGMII)))
+ priv->package_mode = PHY_INTERFACE_MODE_QSGMII;
+ else
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int qca807x_phy_package_config_init_once(struct phy_device *phydev)
+{
+ struct phy_package_shared *shared = phydev->shared;
+ struct qca807x_shared_priv *priv = shared->priv;
+ int val, ret;
+
+ phy_lock_mdio_bus(phydev);
+
+ /* Set correct PHY package mode */
+ val = __phy_package_read(phydev, QCA807X_COMBO_ADDR,
+ QCA807X_CHIP_CONFIGURATION);
+ val &= ~QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK;
+ /* package_mode can be QSGMII or PSGMII and we validate
+ * this in probe_once.
+ * With package_mode to NA, we default to PSGMII.
+ */
+ switch (priv->package_mode) {
+ case PHY_INTERFACE_MODE_QSGMII:
+ val |= QCA807X_CHIP_CONFIGURATION_MODE_QSGMII_SGMII;
+ break;
+ case PHY_INTERFACE_MODE_PSGMII:
+ default:
+ val |= QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_ALL_COPPER;
+ }
+ ret = __phy_package_write(phydev, QCA807X_COMBO_ADDR,
+ QCA807X_CHIP_CONFIGURATION, val);
+ if (ret)
+ goto exit;
+
+ /* After mode change Serdes reset is required */
+ val = __phy_package_read(phydev, QCA807X_PQSGMII_ADDR,
+ PQSGMII_CTRL_REG);
+ val &= ~PQSGMII_ANALOG_SW_RESET;
+ ret = __phy_package_write(phydev, QCA807X_PQSGMII_ADDR,
+ PQSGMII_CTRL_REG, val);
+ if (ret)
+ goto exit;
+
+ msleep(SERDES_RESET_SLEEP);
+
+ val = __phy_package_read(phydev, QCA807X_PQSGMII_ADDR,
+ PQSGMII_CTRL_REG);
+ val |= PQSGMII_ANALOG_SW_RESET;
+ ret = __phy_package_write(phydev, QCA807X_PQSGMII_ADDR,
+ PQSGMII_CTRL_REG, val);
+ if (ret)
+ goto exit;
+
+ /* Workaround to enable AZ transmitting ability */
+ val = __phy_package_read_mmd(phydev, QCA807X_PQSGMII_ADDR,
+ MDIO_MMD_PMAPMD, PQSGMII_MODE_CTRL);
+ val &= ~PQSGMII_MODE_CTRL_AZ_WORKAROUND_MASK;
+ ret = __phy_package_write_mmd(phydev, QCA807X_PQSGMII_ADDR,
+ MDIO_MMD_PMAPMD, PQSGMII_MODE_CTRL, val);
+ if (ret)
+ goto exit;
+
+ /* Set PQSGMII TX AMP strength */
+ val = __phy_package_read(phydev, QCA807X_PQSGMII_ADDR,
+ PQSGMII_DRIVE_CONTROL_1);
+ val &= ~PQSGMII_TX_DRIVER_MASK;
+ val |= FIELD_PREP(PQSGMII_TX_DRIVER_MASK, priv->tx_drive_strength);
+ ret = __phy_package_write(phydev, QCA807X_PQSGMII_ADDR,
+ PQSGMII_DRIVE_CONTROL_1, val);
+ if (ret)
+ goto exit;
+
+ /* Prevent PSGMII going into hibernation via PSGMII self test */
+ val = __phy_package_read_mmd(phydev, QCA807X_COMBO_ADDR,
+ MDIO_MMD_PCS, PQSGMII_MMD3_SERDES_CONTROL);
+ val &= ~BIT(1);
+ ret = __phy_package_write_mmd(phydev, QCA807X_COMBO_ADDR,
+ MDIO_MMD_PCS, PQSGMII_MMD3_SERDES_CONTROL, val);
+
+exit:
+ phy_unlock_mdio_bus(phydev);
+
+ return ret;
+}
+
+static int qca807x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
+{
+ struct phy_device *phydev = upstream;
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
+ phy_interface_t iface;
+ int ret;
+ DECLARE_PHY_INTERFACE_MASK(interfaces);
+
+ sfp_parse_support(phydev->sfp_bus, id, support, interfaces);
+ iface = sfp_select_interface(phydev->sfp_bus, support);
+
+ dev_info(&phydev->mdio.dev, "%s SFP module inserted\n", phy_modes(iface));
+
+ switch (iface) {
+ case PHY_INTERFACE_MODE_1000BASEX:
+ case PHY_INTERFACE_MODE_100BASEX:
+ /* Set PHY mode to PSGMII combo (1/4 copper + combo ports) mode */
+ ret = phy_modify(phydev,
+ QCA807X_CHIP_CONFIGURATION,
+ QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK,
+ QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_FIBER);
+ /* Enable fiber mode autodection (1000Base-X or 100Base-FX) */
+ ret = phy_set_bits_mmd(phydev,
+ MDIO_MMD_AN,
+ QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION,
+ QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION_EN);
+ /* Select fiber page */
+ ret = phy_clear_bits(phydev,
+ QCA807X_CHIP_CONFIGURATION,
+ QCA807X_BT_BX_REG_SEL);
+
+ phydev->port = PORT_FIBRE;
+ break;
+ default:
+ dev_err(&phydev->mdio.dev, "Incompatible SFP module inserted\n");
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static void qca807x_sfp_remove(void *upstream)
+{
+ struct phy_device *phydev = upstream;
+
+ /* Select copper page */
+ phy_set_bits(phydev,
+ QCA807X_CHIP_CONFIGURATION,
+ QCA807X_BT_BX_REG_SEL);
+
+ phydev->port = PORT_TP;
+}
+
+static const struct sfp_upstream_ops qca807x_sfp_ops = {
+ .attach = phy_sfp_attach,
+ .detach = phy_sfp_detach,
+ .module_insert = qca807x_sfp_insert,
+ .module_remove = qca807x_sfp_remove,
+};
+
+static int qca807x_probe(struct phy_device *phydev)
+{
+ struct device_node *node = phydev->mdio.dev.of_node;
+ struct qca807x_shared_priv *shared_priv;
+ struct device *dev = &phydev->mdio.dev;
+ struct phy_package_shared *shared;
+ struct qca807x_priv *priv;
+ int ret;
+
+ ret = devm_of_phy_package_join(dev, phydev, sizeof(*shared_priv));
+ if (ret)
+ return ret;
+
+ if (phy_package_probe_once(phydev)) {
+ ret = qca807x_phy_package_probe_once(phydev);
+ if (ret)
+ return ret;
+ }
+
+ shared = phydev->shared;
+ shared_priv = shared->priv;
+
+ /* Make sure PHY follow PHY package mode if enforced */
+ if (shared_priv->package_mode != PHY_INTERFACE_MODE_NA &&
+ phydev->interface != shared_priv->package_mode)
+ return -EINVAL;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dac_full_amplitude = of_property_read_bool(node, "qcom,dac-full-amplitude");
+ priv->dac_full_bias_current = of_property_read_bool(node, "qcom,dac-full-bias-current");
+ priv->dac_disable_bias_current_tweak = of_property_read_bool(node,
+ "qcom,dac-disable-bias-current-tweak");
+
+ if (IS_ENABLED(CONFIG_GPIOLIB)) {
+ /* Do not register a GPIO controller unless flagged for it */
+ if (of_property_read_bool(node, "gpio-controller")) {
+ ret = qca807x_gpio(phydev);
+ if (ret)
+ return ret;
+ }
+ }
+
+ /* Attach SFP bus on combo port*/
+ if (phy_read(phydev, QCA807X_CHIP_CONFIGURATION)) {
+ ret = phy_sfp_probe(phydev, &qca807x_sfp_ops);
+ if (ret)
+ return ret;
+ linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->advertising);
+ }
+
+ phydev->priv = priv;
+
+ return 0;
+}
+
+static int qca807x_config_init(struct phy_device *phydev)
+{
+ struct qca807x_priv *priv = phydev->priv;
+ u16 control_dac;
+ int ret;
+
+ if (phy_package_init_once(phydev)) {
+ ret = qca807x_phy_package_config_init_once(phydev);
+ if (ret)
+ return ret;
+ }
+
+ control_dac = phy_read_mmd(phydev, MDIO_MMD_AN,
+ QCA807X_MMD7_1000BASE_T_POWER_SAVE_PER_CABLE_LENGTH);
+ control_dac &= ~QCA807X_CONTROL_DAC_MASK;
+ if (!priv->dac_full_amplitude)
+ control_dac |= QCA807X_CONTROL_DAC_DSP_AMPLITUDE;
+ if (!priv->dac_full_amplitude)
+ control_dac |= QCA807X_CONTROL_DAC_DSP_BIAS_CURRENT;
+ if (!priv->dac_disable_bias_current_tweak)
+ control_dac |= QCA807X_CONTROL_DAC_BIAS_CURRENT_TWEAK;
+ return phy_write_mmd(phydev, MDIO_MMD_AN,
+ QCA807X_MMD7_1000BASE_T_POWER_SAVE_PER_CABLE_LENGTH,
+ control_dac);
+}
+
+static struct phy_driver qca807x_drivers[] = {
+ {
+ PHY_ID_MATCH_EXACT(PHY_ID_QCA8072),
+ .name = "Qualcomm QCA8072",
+ .flags = PHY_POLL_CABLE_TEST,
+ /* PHY_GBIT_FEATURES */
+ .probe = qca807x_probe,
+ .config_init = qca807x_config_init,
+ .read_status = qca807x_read_status,
+ .config_intr = at803x_config_intr,
+ .handle_interrupt = at803x_handle_interrupt,
+ .soft_reset = genphy_soft_reset,
+ .get_tunable = at803x_get_tunable,
+ .set_tunable = at803x_set_tunable,
+ .resume = genphy_resume,
+ .suspend = genphy_suspend,
+ .cable_test_start = qca807x_cable_test_start,
+ .cable_test_get_status = qca808x_cable_test_get_status,
+ },
+ {
+ PHY_ID_MATCH_EXACT(PHY_ID_QCA8075),
+ .name = "Qualcomm QCA8075",
+ .flags = PHY_POLL_CABLE_TEST,
+ /* PHY_GBIT_FEATURES */
+ .probe = qca807x_probe,
+ .config_init = qca807x_config_init,
+ .read_status = qca807x_read_status,
+ .config_intr = at803x_config_intr,
+ .handle_interrupt = at803x_handle_interrupt,
+ .soft_reset = genphy_soft_reset,
+ .get_tunable = at803x_get_tunable,
+ .set_tunable = at803x_set_tunable,
+ .resume = genphy_resume,
+ .suspend = genphy_suspend,
+ .cable_test_start = qca807x_cable_test_start,
+ .cable_test_get_status = qca808x_cable_test_get_status,
+ },
+};
+module_phy_driver(qca807x_drivers);
+
+static struct mdio_device_id __maybe_unused qca807x_tbl[] = {
+ { PHY_ID_MATCH_EXACT(PHY_ID_QCA8072) },
+ { PHY_ID_MATCH_EXACT(PHY_ID_QCA8075) },
+ { }
+};
+
+MODULE_AUTHOR("Robert Marko <[email protected]>");
+MODULE_AUTHOR("Christian Marangi <[email protected]>");
+MODULE_DESCRIPTION("Qualcomm QCA807x PHY driver");
+MODULE_DEVICE_TABLE(mdio, qca807x_tbl);
+MODULE_LICENSE("GPL");
--
2.43.0
The LED implementation of qca808x and qca807x is the same but qca807x
supports also Fiber port and have different hw control bits for Fiber
port.
In preparation for qca807x introduction, move all the common define to
shared header.
Signed-off-by: Christian Marangi <[email protected]>
---
drivers/net/phy/qcom/qca808x.c | 65 ----------------------------------
drivers/net/phy/qcom/qcom.h | 65 ++++++++++++++++++++++++++++++++++
2 files changed, 65 insertions(+), 65 deletions(-)
diff --git a/drivers/net/phy/qcom/qca808x.c b/drivers/net/phy/qcom/qca808x.c
index 8377325f157e..f1edff6b6bfc 100644
--- a/drivers/net/phy/qcom/qca808x.c
+++ b/drivers/net/phy/qcom/qca808x.c
@@ -62,29 +62,6 @@
#define QCA808X_DBG_AN_TEST 0xb
#define QCA808X_HIBERNATION_EN BIT(15)
-#define QCA808X_MMD7_LED_GLOBAL 0x8073
-#define QCA808X_LED_BLINK_1 GENMASK(11, 6)
-#define QCA808X_LED_BLINK_2 GENMASK(5, 0)
-/* Values are the same for both BLINK_1 and BLINK_2 */
-#define QCA808X_LED_BLINK_FREQ_MASK GENMASK(5, 3)
-#define QCA808X_LED_BLINK_FREQ_2HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x0)
-#define QCA808X_LED_BLINK_FREQ_4HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x1)
-#define QCA808X_LED_BLINK_FREQ_8HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x2)
-#define QCA808X_LED_BLINK_FREQ_16HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x3)
-#define QCA808X_LED_BLINK_FREQ_32HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x4)
-#define QCA808X_LED_BLINK_FREQ_64HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x5)
-#define QCA808X_LED_BLINK_FREQ_128HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x6)
-#define QCA808X_LED_BLINK_FREQ_256HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x7)
-#define QCA808X_LED_BLINK_DUTY_MASK GENMASK(2, 0)
-#define QCA808X_LED_BLINK_DUTY_50_50 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x0)
-#define QCA808X_LED_BLINK_DUTY_75_25 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x1)
-#define QCA808X_LED_BLINK_DUTY_25_75 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x2)
-#define QCA808X_LED_BLINK_DUTY_33_67 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x3)
-#define QCA808X_LED_BLINK_DUTY_67_33 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x4)
-#define QCA808X_LED_BLINK_DUTY_17_83 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x5)
-#define QCA808X_LED_BLINK_DUTY_83_17 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x6)
-#define QCA808X_LED_BLINK_DUTY_8_92 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x7)
-
#define QCA808X_MMD7_LED2_CTRL 0x8074
#define QCA808X_MMD7_LED2_FORCE_CTRL 0x8075
#define QCA808X_MMD7_LED1_CTRL 0x8076
@@ -92,51 +69,9 @@
#define QCA808X_MMD7_LED0_CTRL 0x8078
#define QCA808X_MMD7_LED_CTRL(x) (0x8078 - ((x) * 2))
-/* LED hw control pattern is the same for every LED */
-#define QCA808X_LED_PATTERN_MASK GENMASK(15, 0)
-#define QCA808X_LED_SPEED2500_ON BIT(15)
-#define QCA808X_LED_SPEED2500_BLINK BIT(14)
-/* Follow blink trigger even if duplex or speed condition doesn't match */
-#define QCA808X_LED_BLINK_CHECK_BYPASS BIT(13)
-#define QCA808X_LED_FULL_DUPLEX_ON BIT(12)
-#define QCA808X_LED_HALF_DUPLEX_ON BIT(11)
-#define QCA808X_LED_TX_BLINK BIT(10)
-#define QCA808X_LED_RX_BLINK BIT(9)
-#define QCA808X_LED_TX_ON_10MS BIT(8)
-#define QCA808X_LED_RX_ON_10MS BIT(7)
-#define QCA808X_LED_SPEED1000_ON BIT(6)
-#define QCA808X_LED_SPEED100_ON BIT(5)
-#define QCA808X_LED_SPEED10_ON BIT(4)
-#define QCA808X_LED_COLLISION_BLINK BIT(3)
-#define QCA808X_LED_SPEED1000_BLINK BIT(2)
-#define QCA808X_LED_SPEED100_BLINK BIT(1)
-#define QCA808X_LED_SPEED10_BLINK BIT(0)
-
#define QCA808X_MMD7_LED0_FORCE_CTRL 0x8079
#define QCA808X_MMD7_LED_FORCE_CTRL(x) (0x8079 - ((x) * 2))
-/* LED force ctrl is the same for every LED
- * No documentation exist for this, not even internal one
- * with NDA as QCOM gives only info about configuring
- * hw control pattern rules and doesn't indicate any way
- * to force the LED to specific mode.
- * These define comes from reverse and testing and maybe
- * lack of some info or some info are not entirely correct.
- * For the basic LED control and hw control these finding
- * are enough to support LED control in all the required APIs.
- *
- * On doing some comparison with implementation with qca807x,
- * it was found that it's 1:1 equal to it and confirms all the
- * reverse done. It was also found further specification with the
- * force mode and the blink modes.
- */
-#define QCA808X_LED_FORCE_EN BIT(15)
-#define QCA808X_LED_FORCE_MODE_MASK GENMASK(14, 13)
-#define QCA808X_LED_FORCE_BLINK_1 FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x3)
-#define QCA808X_LED_FORCE_BLINK_2 FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x2)
-#define QCA808X_LED_FORCE_ON FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x1)
-#define QCA808X_LED_FORCE_OFF FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x0)
-
#define QCA808X_MMD7_LED_POLARITY_CTRL 0x901a
/* QSDK sets by default 0x46 to this reg that sets BIT 6 for
* LED to active high. It's not clear what BIT 3 and BIT 4 does.
diff --git a/drivers/net/phy/qcom/qcom.h b/drivers/net/phy/qcom/qcom.h
index dc259bbf0678..9e24997c355f 100644
--- a/drivers/net/phy/qcom/qcom.h
+++ b/drivers/net/phy/qcom/qcom.h
@@ -103,6 +103,71 @@
/* Added for reference of existence but should be handled by wait_for_completion already */
#define QCA808X_CDT_STATUS_STAT_BUSY (BIT(1) | BIT(3))
+#define QCA808X_MMD7_LED_GLOBAL 0x8073
+#define QCA808X_LED_BLINK_1 GENMASK(11, 6)
+#define QCA808X_LED_BLINK_2 GENMASK(5, 0)
+/* Values are the same for both BLINK_1 and BLINK_2 */
+#define QCA808X_LED_BLINK_FREQ_MASK GENMASK(5, 3)
+#define QCA808X_LED_BLINK_FREQ_2HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x0)
+#define QCA808X_LED_BLINK_FREQ_4HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x1)
+#define QCA808X_LED_BLINK_FREQ_8HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x2)
+#define QCA808X_LED_BLINK_FREQ_16HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x3)
+#define QCA808X_LED_BLINK_FREQ_32HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x4)
+#define QCA808X_LED_BLINK_FREQ_64HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x5)
+#define QCA808X_LED_BLINK_FREQ_128HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x6)
+#define QCA808X_LED_BLINK_FREQ_256HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x7)
+#define QCA808X_LED_BLINK_DUTY_MASK GENMASK(2, 0)
+#define QCA808X_LED_BLINK_DUTY_50_50 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x0)
+#define QCA808X_LED_BLINK_DUTY_75_25 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x1)
+#define QCA808X_LED_BLINK_DUTY_25_75 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x2)
+#define QCA808X_LED_BLINK_DUTY_33_67 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x3)
+#define QCA808X_LED_BLINK_DUTY_67_33 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x4)
+#define QCA808X_LED_BLINK_DUTY_17_83 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x5)
+#define QCA808X_LED_BLINK_DUTY_83_17 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x6)
+#define QCA808X_LED_BLINK_DUTY_8_92 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x7)
+
+/* LED hw control pattern is the same for every LED */
+#define QCA808X_LED_PATTERN_MASK GENMASK(15, 0)
+#define QCA808X_LED_SPEED2500_ON BIT(15)
+#define QCA808X_LED_SPEED2500_BLINK BIT(14)
+/* Follow blink trigger even if duplex or speed condition doesn't match */
+#define QCA808X_LED_BLINK_CHECK_BYPASS BIT(13)
+#define QCA808X_LED_FULL_DUPLEX_ON BIT(12)
+#define QCA808X_LED_HALF_DUPLEX_ON BIT(11)
+#define QCA808X_LED_TX_BLINK BIT(10)
+#define QCA808X_LED_RX_BLINK BIT(9)
+#define QCA808X_LED_TX_ON_10MS BIT(8)
+#define QCA808X_LED_RX_ON_10MS BIT(7)
+#define QCA808X_LED_SPEED1000_ON BIT(6)
+#define QCA808X_LED_SPEED100_ON BIT(5)
+#define QCA808X_LED_SPEED10_ON BIT(4)
+#define QCA808X_LED_COLLISION_BLINK BIT(3)
+#define QCA808X_LED_SPEED1000_BLINK BIT(2)
+#define QCA808X_LED_SPEED100_BLINK BIT(1)
+#define QCA808X_LED_SPEED10_BLINK BIT(0)
+
+/* LED force ctrl is the same for every LED
+ * No documentation exist for this, not even internal one
+ * with NDA as QCOM gives only info about configuring
+ * hw control pattern rules and doesn't indicate any way
+ * to force the LED to specific mode.
+ * These define comes from reverse and testing and maybe
+ * lack of some info or some info are not entirely correct.
+ * For the basic LED control and hw control these finding
+ * are enough to support LED control in all the required APIs.
+ *
+ * On doing some comparison with implementation with qca807x,
+ * it was found that it's 1:1 equal to it and confirms all the
+ * reverse done. It was also found further specification with the
+ * force mode and the blink modes.
+ */
+#define QCA808X_LED_FORCE_EN BIT(15)
+#define QCA808X_LED_FORCE_MODE_MASK GENMASK(14, 13)
+#define QCA808X_LED_FORCE_BLINK_1 FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x3)
+#define QCA808X_LED_FORCE_BLINK_2 FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x2)
+#define QCA808X_LED_FORCE_ON FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x1)
+#define QCA808X_LED_FORCE_OFF FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x0)
+
#define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C
#define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B
#define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A
--
2.43.0
Generalize some qca808x LED functions in preparation for qca807x LED
support.
The LED implementation of qca808x and qca807x is the same but qca807x
supports also Fiber port and have different hw control bits for Fiber
port. To limit code duplication introduce micro functions that takes reg
instead of LED index to tweak all the supported LED modes.
Signed-off-by: Christian Marangi <[email protected]>
---
drivers/net/phy/qcom/qca808x.c | 38 +++-----------------
drivers/net/phy/qcom/qcom-phy-lib.c | 54 +++++++++++++++++++++++++++++
drivers/net/phy/qcom/qcom.h | 7 ++++
3 files changed, 65 insertions(+), 34 deletions(-)
diff --git a/drivers/net/phy/qcom/qca808x.c b/drivers/net/phy/qcom/qca808x.c
index f1edff6b6bfc..2acf852fb4de 100644
--- a/drivers/net/phy/qcom/qca808x.c
+++ b/drivers/net/phy/qcom/qca808x.c
@@ -437,9 +437,7 @@ static int qca808x_led_hw_control_enable(struct phy_device *phydev, u8 index)
return -EINVAL;
reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
-
- return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg,
- QCA808X_LED_FORCE_EN);
+ return qca808x_led_reg_hw_control_enable(phydev, reg);
}
static int qca808x_led_hw_is_supported(struct phy_device *phydev, u8 index,
@@ -480,16 +478,12 @@ static int qca808x_led_hw_control_set(struct phy_device *phydev, u8 index,
static bool qca808x_led_hw_control_status(struct phy_device *phydev, u8 index)
{
u16 reg;
- int val;
if (index > 2)
return false;
reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
-
- val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
-
- return !(val & QCA808X_LED_FORCE_EN);
+ return qca808x_led_reg_hw_control_status(phydev, reg);
}
static int qca808x_led_hw_control_get(struct phy_device *phydev, u8 index,
@@ -557,44 +551,20 @@ static int qca808x_led_brightness_set(struct phy_device *phydev,
}
reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
-
- return phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
- QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK,
- QCA808X_LED_FORCE_EN | (value ? QCA808X_LED_FORCE_ON :
- QCA808X_LED_FORCE_OFF));
+ return qca808x_led_reg_brightness_set(phydev, reg, value);
}
static int qca808x_led_blink_set(struct phy_device *phydev, u8 index,
unsigned long *delay_on,
unsigned long *delay_off)
{
- int ret;
u16 reg;
if (index > 2)
return -EINVAL;
reg = QCA808X_MMD7_LED_FORCE_CTRL(index);
-
- /* Set blink to 50% off, 50% on at 4Hz by default */
- ret = phy_modify_mmd(phydev, MDIO_MMD_AN, QCA808X_MMD7_LED_GLOBAL,
- QCA808X_LED_BLINK_FREQ_MASK | QCA808X_LED_BLINK_DUTY_MASK,
- QCA808X_LED_BLINK_FREQ_4HZ | QCA808X_LED_BLINK_DUTY_50_50);
- if (ret)
- return ret;
-
- /* We use BLINK_1 for normal blinking */
- ret = phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
- QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK,
- QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_BLINK_1);
- if (ret)
- return ret;
-
- /* We set blink to 4Hz, aka 250ms */
- *delay_on = 250 / 2;
- *delay_off = 250 / 2;
-
- return 0;
+ return qca808x_led_reg_blink_set(phydev, reg, delay_on, delay_off);
}
static int qca808x_led_polarity_set(struct phy_device *phydev, int index,
diff --git a/drivers/net/phy/qcom/qcom-phy-lib.c b/drivers/net/phy/qcom/qcom-phy-lib.c
index 786bfc39912c..d28815ef56bb 100644
--- a/drivers/net/phy/qcom/qcom-phy-lib.c
+++ b/drivers/net/phy/qcom/qcom-phy-lib.c
@@ -620,3 +620,57 @@ int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished)
return 0;
}
EXPORT_SYMBOL_GPL(qca808x_cable_test_get_status);
+
+int qca808x_led_reg_hw_control_enable(struct phy_device *phydev, u16 reg)
+{
+ return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg,
+ QCA808X_LED_FORCE_EN);
+}
+EXPORT_SYMBOL_GPL(qca808x_led_reg_hw_control_enable);
+
+bool qca808x_led_reg_hw_control_status(struct phy_device *phydev, u16 reg)
+{
+ int val;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
+ return !(val & QCA808X_LED_FORCE_EN);
+}
+EXPORT_SYMBOL_GPL(qca808x_led_reg_hw_control_status);
+
+int qca808x_led_reg_brightness_set(struct phy_device *phydev,
+ u16 reg, enum led_brightness value)
+{
+ return phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
+ QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK,
+ QCA808X_LED_FORCE_EN | (value ? QCA808X_LED_FORCE_ON :
+ QCA808X_LED_FORCE_OFF));
+}
+EXPORT_SYMBOL_GPL(qca808x_led_reg_brightness_set);
+
+int qca808x_led_reg_blink_set(struct phy_device *phydev, u16 reg,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ int ret;
+
+ /* Set blink to 50% off, 50% on at 4Hz by default */
+ ret = phy_modify_mmd(phydev, MDIO_MMD_AN, QCA808X_MMD7_LED_GLOBAL,
+ QCA808X_LED_BLINK_FREQ_MASK | QCA808X_LED_BLINK_DUTY_MASK,
+ QCA808X_LED_BLINK_FREQ_4HZ | QCA808X_LED_BLINK_DUTY_50_50);
+ if (ret)
+ return ret;
+
+ /* We use BLINK_1 for normal blinking */
+ ret = phy_modify_mmd(phydev, MDIO_MMD_AN, reg,
+ QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_MODE_MASK,
+ QCA808X_LED_FORCE_EN | QCA808X_LED_FORCE_BLINK_1);
+ if (ret)
+ return ret;
+
+ /* We set blink to 4Hz, aka 250ms */
+ *delay_on = 250 / 2;
+ *delay_off = 250 / 2;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(qca808x_led_reg_blink_set);
diff --git a/drivers/net/phy/qcom/qcom.h b/drivers/net/phy/qcom/qcom.h
index 9e24997c355f..4bb541728846 100644
--- a/drivers/net/phy/qcom/qcom.h
+++ b/drivers/net/phy/qcom/qcom.h
@@ -234,3 +234,10 @@ int at803x_cdt_start(struct phy_device *phydev, u32 cdt_start);
int at803x_cdt_wait_for_completion(struct phy_device *phydev,
u32 cdt_en);
int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished);
+int qca808x_led_reg_hw_control_enable(struct phy_device *phydev, u16 reg);
+bool qca808x_led_reg_hw_control_status(struct phy_device *phydev, u16 reg);
+int qca808x_led_reg_brightness_set(struct phy_device *phydev,
+ u16 reg, enum led_brightness value);
+int qca808x_led_reg_blink_set(struct phy_device *phydev, u16 reg,
+ unsigned long *delay_on,
+ unsigned long *delay_off);
--
2.43.0
QCA8072/5 have up to 2 LEDs attached for PHY.
LEDs can be configured to be ON/hw blink or be set to HW control.
Hw blink mode is set to blink at 4Hz or 250ms.
PHY can support both copper (TP) or fiber (FIBRE) kind and supports
different HW control modes based on the port type.
HW control modes supported for netdev trigger for copper ports are:
- LINK_10
- LINK_100
- LINK_1000
- TX
- RX
- FULL_DUPLEX
- HALF_DUPLEX
HW control modes supported for netdev trigger for fiber ports are:
- LINK_100
- LINK_1000
- TX
- RX
- FULL_DUPLEX
- HALF_DUPLEX
LED support conflicts with GPIO controller feature and must be disabled
if gpio-controller is used for the PHY.
Signed-off-by: Christian Marangi <[email protected]>
---
drivers/net/phy/qcom/qca807x.c | 256 ++++++++++++++++++++++++++++++++-
1 file changed, 254 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/qcom/qca807x.c b/drivers/net/phy/qcom/qca807x.c
index 43fc9cddd975..01815f947060 100644
--- a/drivers/net/phy/qcom/qca807x.c
+++ b/drivers/net/phy/qcom/qca807x.c
@@ -57,8 +57,18 @@
#define QCA807X_MMD7_LED_CTRL(x) (0x8074 + ((x) * 2))
#define QCA807X_MMD7_LED_FORCE_CTRL(x) (0x8075 + ((x) * 2))
-#define QCA807X_GPIO_FORCE_EN BIT(15)
-#define QCA807X_GPIO_FORCE_MODE_MASK GENMASK(14, 13)
+/* LED hw control pattern for fiber port */
+#define QCA807X_LED_FIBER_PATTERN_MASK GENMASK(11, 1)
+#define QCA807X_LED_FIBER_TXACT_BLK_EN BIT(10)
+#define QCA807X_LED_FIBER_RXACT_BLK_EN BIT(9)
+#define QCA807X_LED_FIBER_FDX_ON_EN BIT(6)
+#define QCA807X_LED_FIBER_HDX_ON_EN BIT(5)
+#define QCA807X_LED_FIBER_1000BX_ON_EN BIT(2)
+#define QCA807X_LED_FIBER_100FX_ON_EN BIT(1)
+
+/* Some device repurpose the LED as GPIO out */
+#define QCA807X_GPIO_FORCE_EN QCA808X_LED_FORCE_EN
+#define QCA807X_GPIO_FORCE_MODE_MASK QCA808X_LED_FORCE_MODE_MASK
#define QCA807X_FUNCTION_CONTROL 0x10
#define QCA807X_FC_MDI_CROSSOVER_MODE_MASK GENMASK(6, 5)
@@ -121,6 +131,233 @@ static int qca807x_cable_test_start(struct phy_device *phydev)
return 0;
}
+static int qca807x_led_parse_netdev(struct phy_device *phydev, unsigned long rules,
+ u16 *offload_trigger)
+{
+ /* Parsing specific to netdev trigger */
+ switch (phydev->port) {
+ case PORT_TP:
+ if (test_bit(TRIGGER_NETDEV_TX, &rules))
+ *offload_trigger |= QCA808X_LED_TX_BLINK;
+ if (test_bit(TRIGGER_NETDEV_RX, &rules))
+ *offload_trigger |= QCA808X_LED_RX_BLINK;
+ if (test_bit(TRIGGER_NETDEV_LINK_10, &rules))
+ *offload_trigger |= QCA808X_LED_SPEED10_ON;
+ if (test_bit(TRIGGER_NETDEV_LINK_100, &rules))
+ *offload_trigger |= QCA808X_LED_SPEED100_ON;
+ if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules))
+ *offload_trigger |= QCA808X_LED_SPEED1000_ON;
+ if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules))
+ *offload_trigger |= QCA808X_LED_HALF_DUPLEX_ON;
+ if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules))
+ *offload_trigger |= QCA808X_LED_FULL_DUPLEX_ON;
+ break;
+ case PORT_FIBRE:
+ if (test_bit(TRIGGER_NETDEV_TX, &rules))
+ *offload_trigger |= QCA807X_LED_FIBER_TXACT_BLK_EN;
+ if (test_bit(TRIGGER_NETDEV_RX, &rules))
+ *offload_trigger |= QCA807X_LED_FIBER_RXACT_BLK_EN;
+ if (test_bit(TRIGGER_NETDEV_LINK_100, &rules))
+ *offload_trigger |= QCA807X_LED_FIBER_100FX_ON_EN;
+ if (test_bit(TRIGGER_NETDEV_LINK_1000, &rules))
+ *offload_trigger |= QCA807X_LED_FIBER_1000BX_ON_EN;
+ if (test_bit(TRIGGER_NETDEV_HALF_DUPLEX, &rules))
+ *offload_trigger |= QCA807X_LED_FIBER_HDX_ON_EN;
+ if (test_bit(TRIGGER_NETDEV_FULL_DUPLEX, &rules))
+ *offload_trigger |= QCA807X_LED_FIBER_FDX_ON_EN;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ if (rules && !*offload_trigger)
+ return -EOPNOTSUPP;
+
+ return 0;
+}
+
+static int qca807x_led_hw_control_enable(struct phy_device *phydev, u8 index)
+{
+ u16 reg;
+
+ if (index > 1)
+ return -EINVAL;
+
+ reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
+ return qca808x_led_reg_hw_control_enable(phydev, reg);
+}
+
+static int qca807x_led_hw_is_supported(struct phy_device *phydev, u8 index,
+ unsigned long rules)
+{
+ u16 offload_trigger = 0;
+
+ if (index > 1)
+ return -EINVAL;
+
+ return qca807x_led_parse_netdev(phydev, rules, &offload_trigger);
+}
+
+static int qca807x_led_hw_control_set(struct phy_device *phydev, u8 index,
+ unsigned long rules)
+{
+ u16 reg, mask, offload_trigger = 0;
+ int ret;
+
+ if (index > 1)
+ return -EINVAL;
+
+ ret = qca807x_led_parse_netdev(phydev, rules, &offload_trigger);
+ if (ret)
+ return ret;
+
+ ret = qca807x_led_hw_control_enable(phydev, index);
+ if (ret)
+ return ret;
+
+ switch (phydev->port) {
+ case PORT_TP:
+ reg = QCA807X_MMD7_LED_CTRL(index);
+ mask = QCA808X_LED_PATTERN_MASK;
+ break;
+ case PORT_FIBRE:
+ /* HW control pattern bits are in LED FORCE reg */
+ reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
+ mask = QCA807X_LED_FIBER_PATTERN_MASK;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return phy_modify_mmd(phydev, MDIO_MMD_AN, reg, mask,
+ offload_trigger);
+}
+
+static bool qca807x_led_hw_control_status(struct phy_device *phydev, u8 index)
+{
+ u16 reg;
+
+ if (index > 1)
+ return false;
+
+ reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
+ return qca808x_led_reg_hw_control_status(phydev, reg);
+}
+
+static int qca807x_led_hw_control_get(struct phy_device *phydev, u8 index,
+ unsigned long *rules)
+{
+ u16 reg;
+ int val;
+
+ if (index > 1)
+ return -EINVAL;
+
+ /* Check if we have hw control enabled */
+ if (qca807x_led_hw_control_status(phydev, index))
+ return -EINVAL;
+
+ /* Parsing specific to netdev trigger */
+ switch (phydev->port) {
+ case PORT_TP:
+ reg = QCA807X_MMD7_LED_CTRL(index);
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
+ if (val & QCA808X_LED_TX_BLINK)
+ set_bit(TRIGGER_NETDEV_TX, rules);
+ if (val & QCA808X_LED_RX_BLINK)
+ set_bit(TRIGGER_NETDEV_RX, rules);
+ if (val & QCA808X_LED_SPEED10_ON)
+ set_bit(TRIGGER_NETDEV_LINK_10, rules);
+ if (val & QCA808X_LED_SPEED100_ON)
+ set_bit(TRIGGER_NETDEV_LINK_100, rules);
+ if (val & QCA808X_LED_SPEED1000_ON)
+ set_bit(TRIGGER_NETDEV_LINK_1000, rules);
+ if (val & QCA808X_LED_HALF_DUPLEX_ON)
+ set_bit(TRIGGER_NETDEV_HALF_DUPLEX, rules);
+ if (val & QCA808X_LED_FULL_DUPLEX_ON)
+ set_bit(TRIGGER_NETDEV_FULL_DUPLEX, rules);
+ break;
+ case PORT_FIBRE:
+ /* HW control pattern bits are in LED FORCE reg */
+ reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, reg);
+ if (val & QCA807X_LED_FIBER_TXACT_BLK_EN)
+ set_bit(TRIGGER_NETDEV_TX, rules);
+ if (val & QCA807X_LED_FIBER_RXACT_BLK_EN)
+ set_bit(TRIGGER_NETDEV_RX, rules);
+ if (val & QCA807X_LED_FIBER_100FX_ON_EN)
+ set_bit(TRIGGER_NETDEV_LINK_100, rules);
+ if (val & QCA807X_LED_FIBER_1000BX_ON_EN)
+ set_bit(TRIGGER_NETDEV_LINK_1000, rules);
+ if (val & QCA807X_LED_FIBER_HDX_ON_EN)
+ set_bit(TRIGGER_NETDEV_HALF_DUPLEX, rules);
+ if (val & QCA807X_LED_FIBER_FDX_ON_EN)
+ set_bit(TRIGGER_NETDEV_FULL_DUPLEX, rules);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int qca807x_led_hw_control_reset(struct phy_device *phydev, u8 index)
+{
+ u16 reg, mask;
+
+ if (index > 1)
+ return -EINVAL;
+
+ switch (phydev->port) {
+ case PORT_TP:
+ reg = QCA807X_MMD7_LED_CTRL(index);
+ mask = QCA808X_LED_PATTERN_MASK;
+ break;
+ case PORT_FIBRE:
+ /* HW control pattern bits are in LED FORCE reg */
+ reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
+ mask = QCA807X_LED_FIBER_PATTERN_MASK;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, reg, mask);
+}
+
+static int qca807x_led_brightness_set(struct phy_device *phydev,
+ u8 index, enum led_brightness value)
+{
+ u16 reg;
+ int ret;
+
+ if (index > 1)
+ return -EINVAL;
+
+ /* If we are setting off the LED reset any hw control rule */
+ if (!value) {
+ ret = qca807x_led_hw_control_reset(phydev, index);
+ if (ret)
+ return ret;
+ }
+
+ reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
+ return qca808x_led_reg_brightness_set(phydev, reg, value);
+}
+
+static int qca807x_led_blink_set(struct phy_device *phydev, u8 index,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ u16 reg;
+
+ if (index > 1)
+ return -EINVAL;
+
+ reg = QCA807X_MMD7_LED_FORCE_CTRL(index);
+ return qca808x_led_reg_blink_set(phydev, reg, delay_on, delay_off);
+}
+
#ifdef CONFIG_GPIOLIB
static int qca807x_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
{
@@ -496,6 +733,16 @@ static int qca807x_probe(struct phy_device *phydev)
"qcom,dac-disable-bias-current-tweak");
if (IS_ENABLED(CONFIG_GPIOLIB)) {
+ /* Make sure we don't have mixed leds node and gpio-controller
+ * to prevent registering leds and having gpio-controller usage
+ * conflicting with them.
+ */
+ if (of_find_property(node, "leds", NULL) &&
+ of_find_property(node, "gpio-controller", NULL)) {
+ phydev_err(phydev, "Invalid property detected. LEDs and gpio-controller are mutually exclusive.");
+ return -EINVAL;
+ }
+
/* Do not register a GPIO controller unless flagged for it */
if (of_property_read_bool(node, "gpio-controller")) {
ret = qca807x_gpio(phydev);
@@ -580,6 +827,11 @@ static struct phy_driver qca807x_drivers[] = {
.suspend = genphy_suspend,
.cable_test_start = qca807x_cable_test_start,
.cable_test_get_status = qca808x_cable_test_get_status,
+ .led_brightness_set = qca807x_led_brightness_set,
+ .led_blink_set = qca807x_led_blink_set,
+ .led_hw_is_supported = qca807x_led_hw_is_supported,
+ .led_hw_control_set = qca807x_led_hw_control_set,
+ .led_hw_control_get = qca807x_led_hw_control_get,
},
};
module_phy_driver(qca807x_drivers);
--
2.43.0
On Tue, Feb 06, 2024 at 06:31:05PM +0100, Christian Marangi wrote:
> Add support for scanning PHY in PHY package nodes. PHY packages nodes
> are just container for actual PHY on the MDIO bus.
>
> Their PHY address defined in the PHY package node are absolute and
> reflect the address on the MDIO bus.
>
> mdio_bus.c and of_mdio.c is updated to now support and parse also
> PHY package subnode by checking if the node name match
> "ethernet-phy-package".
>
> As PHY package reg is mandatory and each PHY in the PHY package must
> have a reg, every invalid PHY Package node is ignored and will be
> skipped by the autoscan fallback.
>
> Signed-off-by: Christian Marangi <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Andrew
On Tue, Feb 06, 2024 at 06:31:06PM +0100, Christian Marangi wrote:
> Add devm/of_phy_package_join helper to join PHYs in a PHY package. These
> are variant of the manual phy_package_join with the difference that
> these will use DT nodes to derive the base_addr instead of manually
> passing an hardcoded value.
>
> An additional value is added in phy_package_shared, "np" to reference
> the PHY package node pointer in specific PHY driver probe_once and
> config_init_once functions to make use of additional specific properties
> defined in the PHY package node in DT.
>
> The np value is filled only with of_phy_package_join if a valid PHY
> package node is found. A valid PHY package node must have the node name
> set to "ethernet-phy-package".
>
> Signed-off-by: Christian Marangi <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Andrew
On Tue, Feb 06, 2024 at 06:31:07PM +0100, Christian Marangi wrote:
65;7402;1c> Move more function to shared library in preparation for introduction of
> new PHY Family qca807x that will make use of both functions from at803x
> and qca808x as it's a transition PHY with some implementation of at803x
> and some from the new qca808x.
>
> Signed-off-by: Christian Marangi <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Andrew
On Tue, Feb 06, 2024 at 06:31:08PM +0100, Christian Marangi wrote:
> Document Qcom QCA807x PHY package.
>
> Qualcomm QCA807X Ethernet PHY is PHY package of 2 or 5
> IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and
> 1000BASE-T PHY-s.
>
> Document the required property to make the PHY package correctly
> configure and work.
>
> Signed-off-by: Christian Marangi <[email protected]>
> Reviewed-by: Conor Dooley <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Andrew
On Tue, Feb 06, 2024 at 06:31:09PM +0100, Christian Marangi wrote:
> Some PHY driver might require additional regs call after
> genphy_c37_read_status() is called.
>
> Expand genphy_c37_read_status to provide a bool wheather the link has
> changed or not to permit PHY driver to skip additional regs call if
> nothing has changed.
>
> Every user of genphy_c37_read_status() is updated with the new
> additional bool.
>
> Signed-off-by: Christian Marangi <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Andrew
On Tue, Feb 06, 2024 at 06:31:11PM +0100, Christian Marangi wrote:
> The LED implementation of qca808x and qca807x is the same but qca807x
> supports also Fiber port and have different hw control bits for Fiber
> port.
>
> In preparation for qca807x introduction, move all the common define to
> shared header.
>
> Signed-off-by: Christian Marangi <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Andrew
On Tue, Feb 06, 2024 at 06:31:10PM +0100, Christian Marangi wrote:
> From: Robert Marko <[email protected]>
>
> This adds driver for the Qualcomm QCA8072 and QCA8075 PHY-s.
>
> They are 2 or 5 port IEEE 802.3 clause 22 compliant 10BASE-Te,
> 100BASE-TX and 1000BASE-T PHY-s.
>
> They feature 2 SerDes, one for PSGMII or QSGMII connection with
> MAC, while second one is SGMII for connection to MAC or fiber.
>
> Both models have a combo port that supports 1000BASE-X and
> 100BASE-FX fiber.
>
> PHY package can be configured in 3 mode following this table:
>
> First Serdes mode Second Serdes mode
> Option 1 PSGMII for copper Disabled
> ports 0-4
> Option 2 PSGMII for copper 1000BASE-X / 100BASE-FX
> ports 0-4
> Option 3 QSGMII for copper SGMII for
> ports 0-3 copper port 4
>
> Each PHY inside of QCA807x series has 4 digitally controlled
> output only pins that natively drive LED-s.
> But some vendors used these to driver generic LED-s controlled
> by userspace, so lets enable registering each PHY as GPIO
> controller and add driver for it.
>
> These are commonly used in Qualcomm IPQ40xx, IPQ60xx and IPQ807x
> boards.
>
> Co-developed-by: Christian Marangi <[email protected]>
> Signed-off-by: Robert Marko <[email protected]>
> Signed-off-by: Christian Marangi <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Andrew
Hello:
This series was applied to netdev/net-next.git (main)
by David S. Miller <[email protected]>:
On Tue, 6 Feb 2024 18:31:03 +0100 you wrote:
> Idea of this big series is to introduce the concept of PHY package in DT
> and give PHY drivers a way to derive the base address from DT.
>
> The concept of PHY package is nothing new and is already a thing in the
> kernel with the API phy_package_join/leave/read/write.
>
> What is currently lacking is describing this in DT and better reference
> a base address to calculate offset from.
>
> [...]
Here is the summary with links:
- [net-next,v7,01/10] dt-bindings: net: document ethernet PHY package nodes
https://git.kernel.org/netdev/net-next/c/8453c88c7a15
- [net-next,v7,02/10] net: phy: add support for scanning PHY in PHY packages nodes
https://git.kernel.org/netdev/net-next/c/385ef48f4686
- [net-next,v7,03/10] net: phy: add devm/of_phy_package_join helper
https://git.kernel.org/netdev/net-next/c/471e8fd3afce
- [net-next,v7,04/10] net: phy: qcom: move more function to shared library
https://git.kernel.org/netdev/net-next/c/737eb75a815f
- [net-next,v7,05/10] dt-bindings: net: Document Qcom QCA807x PHY package
https://git.kernel.org/netdev/net-next/c/dd87eaa13787
- [net-next,v7,06/10] net: phy: provide whether link has changed in c37_read_status
https://git.kernel.org/netdev/net-next/c/9b1d5e055508
- [net-next,v7,07/10] net: phy: qcom: add support for QCA807x PHY Family
https://git.kernel.org/netdev/net-next/c/d1cb613efbd3
- [net-next,v7,08/10] net: phy: qcom: move common qca808x LED define to shared header
https://git.kernel.org/netdev/net-next/c/ee9d9807bee0
- [net-next,v7,09/10] net: phy: qcom: generalize some qca808x LED functions
https://git.kernel.org/netdev/net-next/c/47b930d0dd43
- [net-next,v7,10/10] net: phy: qca807x: add support for configurable LED
https://git.kernel.org/netdev/net-next/c/f508a226b517
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html