The early boot stub for sh had UBSan instrumentation present where it is
not supported. Disable it for this part of the build.
sh4-linux-ld: arch/sh/boot/compressed/misc.o: in function `zlib_inflate_table':
misc.c:(.text+0x670): undefined reference to `__ubsan_handle_shift_out_of_bounds'
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Cc: Yoshinori Sato <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: John Paul Adrian Glaubitz <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
---
arch/sh/boot/compressed/Makefile | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
index b5e29f99c02c..6c6c791a1d06 100644
--- a/arch/sh/boot/compressed/Makefile
+++ b/arch/sh/boot/compressed/Makefile
@@ -12,6 +12,7 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \
vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo $(OBJECTS)
GCOV_PROFILE := n
+UBSAN_SANITIZE := n
#
# IMAGE_OFFSET is the load offset of the compression loader
--
2.34.1
Hi Kees,
On Tue, 2024-01-30 at 15:27 -0800, Kees Cook wrote:
> The early boot stub for sh had UBSan instrumentation present where it is
> not supported. Disable it for this part of the build.
>
> sh4-linux-ld: arch/sh/boot/compressed/misc.o: in function `zlib_inflate_table':
> misc.c:(.text+0x670): undefined reference to `__ubsan_handle_shift_out_of_bounds'
>
> Reported-by: kernel test robot <[email protected]>
> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
> Cc: Yoshinori Sato <[email protected]>
> Cc: Rich Felker <[email protected]>
> Cc: John Paul Adrian Glaubitz <[email protected]>
> Cc: Masahiro Yamada <[email protected]>
> Cc: Nicolas Schier <[email protected]>
> Cc: [email protected]
> Signed-off-by: Kees Cook <[email protected]>
> ---
> arch/sh/boot/compressed/Makefile | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
> index b5e29f99c02c..6c6c791a1d06 100644
> --- a/arch/sh/boot/compressed/Makefile
> +++ b/arch/sh/boot/compressed/Makefile
> @@ -12,6 +12,7 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinuxbin.bz2 \
> vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo $(OBJECTS)
>
> GCOV_PROFILE := n
> +UBSAN_SANITIZE := n
>
> #
> # IMAGE_OFFSET is the load offset of the compression loader
Thanks for the patch. I'm looking into this now and will provide the review later.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
Hi Kees,
On Wed, 2024-01-31 at 12:03 +0100, John Paul Adrian Glaubitz wrote:
> Hi Kees,
>
> On Tue, 2024-01-30 at 15:27 -0800, Kees Cook wrote:
> > The early boot stub for sh had UBSan instrumentation present where it is
> > not supported. Disable it for this part of the build.
> >
> > sh4-linux-ld: arch/sh/boot/compressed/misc.o: in function `zlib_inflate_table':
> > misc.c:(.text+0x670): undefined reference to `__ubsan_handle_shift_out_of_bounds'
> >
> > Reported-by: kernel test robot <[email protected]>
> > Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
> > Cc: Yoshinori Sato <[email protected]>
> > Cc: Rich Felker <[email protected]>
> > Cc: John Paul Adrian Glaubitz <[email protected]>
> > Cc: Masahiro Yamada <[email protected]>
> > Cc: Nicolas Schier <[email protected]>
> > Cc: [email protected]
> > Signed-off-by: Kees Cook <[email protected]>
> > ---
> > arch/sh/boot/compressed/Makefile | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
> > index b5e29f99c02c..6c6c791a1d06 100644
> > --- a/arch/sh/boot/compressed/Makefile
> > +++ b/arch/sh/boot/compressed/Makefile
> > @@ -12,6 +12,7 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \
> > vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo $(OBJECTS)
> >
> > GCOV_PROFILE := n
> > +UBSAN_SANITIZE := n
> >
> > #
> > # IMAGE_OFFSET is the load offset of the compression loader
>
> Thanks for the patch. I'm looking into this now and will provide the review later.
I tried to reproduce the error using your tree and the branch devel/overflow/ubsan-only
minus the above patch and using the provided config but I'm unable to reproduce the
error above.
Am I missing anything?
Thanks,
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
On Wed, Jan 31, 2024 at 12:19:22PM +0100, John Paul Adrian Glaubitz wrote:
> Hi Kees,
>
> On Wed, 2024-01-31 at 12:03 +0100, John Paul Adrian Glaubitz wrote:
> > Hi Kees,
> >
> > On Tue, 2024-01-30 at 15:27 -0800, Kees Cook wrote:
> > > The early boot stub for sh had UBSan instrumentation present where it is
> > > not supported. Disable it for this part of the build.
> > >
> > > sh4-linux-ld: arch/sh/boot/compressed/misc.o: in function `zlib_inflate_table':
> > > misc.c:(.text+0x670): undefined reference to `__ubsan_handle_shift_out_of_bounds'
> > >
> > > Reported-by: kernel test robot <[email protected]>
> > > Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
> > > Cc: Yoshinori Sato <[email protected]>
> > > Cc: Rich Felker <[email protected]>
> > > Cc: John Paul Adrian Glaubitz <[email protected]>
> > > Cc: Masahiro Yamada <[email protected]>
> > > Cc: Nicolas Schier <[email protected]>
> > > Cc: [email protected]
> > > Signed-off-by: Kees Cook <[email protected]>
> > > ---
> > > arch/sh/boot/compressed/Makefile | 1 +
> > > 1 file changed, 1 insertion(+)
> > >
> > > diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
> > > index b5e29f99c02c..6c6c791a1d06 100644
> > > --- a/arch/sh/boot/compressed/Makefile
> > > +++ b/arch/sh/boot/compressed/Makefile
> > > @@ -12,6 +12,7 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \
> > > vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo $(OBJECTS)
> > >
> > > GCOV_PROFILE := n
> > > +UBSAN_SANITIZE := n
> > >
> > > #
> > > # IMAGE_OFFSET is the load offset of the compression loader
> >
> > Thanks for the patch. I'm looking into this now and will provide the review later.
>
> I tried to reproduce the error using your tree and the branch devel/overflow/ubsan-only
> minus the above patch and using the provided config but I'm unable to reproduce the
> error above.
>
> Am I missing anything?
When I use GCC 13.2 (I'm specifically on Ubuntu 23.10) and the randconfig
linked from the report:
https://download.01.org/0day-ci/archive/20240131/[email protected]/config
(which is notably enabling CONFIG_UBSAN=y and CONFIG_UBSAN_SHIFT=y) then I
see at the final link stage:
/usr/bin/sh4-linux-gnu-ld: arch/sh/boot/compressed/misc.o: in function `zlib_inflate_table':
misc.c:(.text+0x650): undefined reference to `__ubsan_handle_shift_out_of_bounds'
..
After the patch, it's solved.
-Kees
--
Kees Cook
Hi Kees,
On Fri, 2024-02-02 at 02:32 -0800, Kees Cook wrote:
> On Wed, Jan 31, 2024 at 12:19:22PM +0100, John Paul Adrian Glaubitz wrote:
> > Hi Kees,
> >
> > On Wed, 2024-01-31 at 12:03 +0100, John Paul Adrian Glaubitz wrote:
> > > Hi Kees,
> > >
> > > On Tue, 2024-01-30 at 15:27 -0800, Kees Cook wrote:
> > > > The early boot stub for sh had UBSan instrumentation present where it is
> > > > not supported. Disable it for this part of the build.
> > > >
> > > > sh4-linux-ld: arch/sh/boot/compressed/misc.o: in function `zlib_inflate_table':
> > > > misc.c:(.text+0x670): undefined reference to `__ubsan_handle_shift_out_of_bounds'
> > > >
> > > > Reported-by: kernel test robot <[email protected]>
> > > > Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
> > > > Cc: Yoshinori Sato <[email protected]>
> > > > Cc: Rich Felker <[email protected]>
> > > > Cc: John Paul Adrian Glaubitz <[email protected]>
> > > > Cc: Masahiro Yamada <[email protected]>
> > > > Cc: Nicolas Schier <[email protected]>
> > > > Cc: [email protected]
> > > > Signed-off-by: Kees Cook <[email protected]>
> > > > ---
> > > > arch/sh/boot/compressed/Makefile | 1 +
> > > > 1 file changed, 1 insertion(+)
> > > >
> > > > diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
> > > > index b5e29f99c02c..6c6c791a1d06 100644
> > > > --- a/arch/sh/boot/compressed/Makefile
> > > > +++ b/arch/sh/boot/compressed/Makefile
> > > > @@ -12,6 +12,7 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \
> > > > vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo $(OBJECTS)
> > > >
> > > > GCOV_PROFILE := n
> > > > +UBSAN_SANITIZE := n
> > > >
> > > > #
> > > > # IMAGE_OFFSET is the load offset of the compression loader
> > >
> > > Thanks for the patch. I'm looking into this now and will provide the review later.
> >
> > I tried to reproduce the error using your tree and the branch devel/overflow/ubsan-only
> > minus the above patch and using the provided config but I'm unable to reproduce the
> > error above.
> >
> > Am I missing anything?
>
> When I use GCC 13.2 (I'm specifically on Ubuntu 23.10) and the randconfig
> linked from the report:
> https://download.01.org/0day-ci/archive/20240131/[email protected]/config
> (which is notably enabling CONFIG_UBSAN=y and CONFIG_UBSAN_SHIFT=y) then I
> see at the final link stage:
>
> /usr/bin/sh4-linux-gnu-ld: arch/sh/boot/compressed/misc.o: in function `zlib_inflate_table':
> misc.c:(.text+0x650): undefined reference to `__ubsan_handle_shift_out_of_bounds'
> ...
>
> After the patch, it's solved.
OK, let me test with gcc 13.x. My build host is currently running openSUSE Leap 15.5.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
Hi Kees,
On Fri, 2024-02-02 at 12:06 +0100, John Paul Adrian Glaubitz wrote:
> > When I use GCC 13.2 (I'm specifically on Ubuntu 23.10) and the randconfig
> > linked from the report:
> > https://download.01.org/0day-ci/archive/20240131/[email protected]/config
> > (which is notably enabling CONFIG_UBSAN=y and CONFIG_UBSAN_SHIFT=y) then I
> > see at the final link stage:
> >
> > /usr/bin/sh4-linux-gnu-ld: arch/sh/boot/compressed/misc.o: in function `zlib_inflate_table':
> > misc.c:(.text+0x650): undefined reference to `__ubsan_handle_shift_out_of_bounds'
> > ...
> >
> > After the patch, it's solved.
>
> OK, let me test with gcc 13.x. My build host is currently running openSUSE Leap 15.5.
I just wanted to try reproduce the problem again with the reproducer in [1] as well
as with gcc-13.2.0, but your branch devel/overflow/ubsan-only no longer exists.
Can you tell me where to find the patches now?
Adrian
> [1] https://download.01.org/0day-ci/archive/20240131/[email protected]/reproduce
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
On Sun, Feb 11, 2024 at 11:39:49AM +0100, John Paul Adrian Glaubitz wrote:
> Hi Kees,
>
> On Fri, 2024-02-02 at 12:06 +0100, John Paul Adrian Glaubitz wrote:
> > > When I use GCC 13.2 (I'm specifically on Ubuntu 23.10) and the randconfig
> > > linked from the report:
> > > https://download.01.org/0day-ci/archive/20240131/[email protected]/config
> > > (which is notably enabling CONFIG_UBSAN=y and CONFIG_UBSAN_SHIFT=y) then I
> > > see at the final link stage:
> > >
> > > /usr/bin/sh4-linux-gnu-ld: arch/sh/boot/compressed/misc.o: in function `zlib_inflate_table':
> > > misc.c:(.text+0x650): undefined reference to `__ubsan_handle_shift_out_of_bounds'
> > > ...
> > >
> > > After the patch, it's solved.
> >
> > OK, let me test with gcc 13.x. My build host is currently running openSUSE Leap 15.5.
>
> I just wanted to try reproduce the problem again with the reproducer in [1] as well
> as with gcc-13.2.0, but your branch devel/overflow/ubsan-only no longer exists.
>
> Can you tell me where to find the patches now?
Sure, they're in -next, but for an -rc2 based tree, see:
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git/log/?h=for-next/kspp
--
Kees Cook
On Mon, 2024-02-12 at 10:26 -0800, Kees Cook wrote:
> > I just wanted to try reproduce the problem again with the reproducer in [1] as well
> > as with gcc-13.2.0, but your branch devel/overflow/ubsan-only no longer exists.
> >
> > Can you tell me where to find the patches now?
>
> Sure, they're in -next, but for an -rc2 based tree, see:
> https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git/log/?h=for-next/kspp
OK, thanks. I will give it a try with gcc-13.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
Hi Kees,
On Mon, 2024-02-12 at 19:45 +0100, John Paul Adrian Glaubitz wrote:
> On Mon, 2024-02-12 at 10:26 -0800, Kees Cook wrote:
> > > I just wanted to try reproduce the problem again with the reproducer in [1] as well
> > > as with gcc-13.2.0, but your branch devel/overflow/ubsan-only no longer exists.
> > >
> > > Can you tell me where to find the patches now?
> >
> > Sure, they're in -next, but for an -rc2 based tree, see:
> > https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git/log/?h=for-next/kspp
>
> OK, thanks. I will give it a try with gcc-13.
I'm still unable to reproduce the error that the kernel test robot reported.
I'm using gcc-13:
glaubitz@node54:/data/home/glaubitz/linux-kees> sh4-linux-gcc
sh4-linux-gcc: fatal error: no input files
compilation terminated.
glaubitz@node54:/data/home/glaubitz/linux-kees> sh4-linux-gcc --version
sh4-linux-gcc (GCC) 13.2.0
Copyright (C) 2023 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
glaubitz@node54:/data/home/glaubitz/linux-kees>
I checked out your tree and the for-next/kspp branch.
Then fetched the config that triggered the bug like this:
$ wget https://download.01.org/0day-ci/archive/20240131/[email protected]/config -O .config
Building the kernel with "make -j32 uImage" works fine. No errors except for
some unreleated warnings that still need to be fixed.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913
Hi Adrian,
On Wed, 2024-02-14 at 13:52 +0100, John Paul Adrian Glaubitz wrote:
> Hi Kees,
>
> On Mon, 2024-02-12 at 19:45 +0100, John Paul Adrian Glaubitz wrote:
> > On Mon, 2024-02-12 at 10:26 -0800, Kees Cook wrote:
> > > > I just wanted to try reproduce the problem again with the reproducer in [1] as well
> > > > as with gcc-13.2.0, but your branch devel/overflow/ubsan-only no longer exists.
> > > >
> > > > Can you tell me where to find the patches now?
> > >
> > > Sure, they're in -next, but for an -rc2 based tree, see:
> > > https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git/log/?h=for-next/kspp
> >
> > OK, thanks. I will give it a try with gcc-13.
>
> I'm still unable to reproduce the error that the kernel test robot reported.
>
> I'm using gcc-13:
>
> glaubitz@node54:/data/home/glaubitz/linux-kees> sh4-linux-gcc
> sh4-linux-gcc: fatal error: no input files
> compilation terminated.
> glaubitz@node54:/data/home/glaubitz/linux-kees> sh4-linux-gcc --version
> sh4-linux-gcc (GCC) 13.2.0
> Copyright (C) 2023 Free Software Foundation, Inc.
> This is free software; see the source for copying conditions. There is NO
> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>
> glaubitz@node54:/data/home/glaubitz/linux-kees>
>
> I checked out your tree and the for-next/kspp branch.
>
> Then fetched the config that triggered the bug like this:
>
> $ wget https://download.01.org/0day-ci/archive/20240131/[email protected]/config -O .config
>
> Building the kernel with "make -j32 uImage" works fine. No errors except for
> some unreleated warnings that still need to be fixed.
Sorry for late reply. Seems like the warnings can be reproduced by
"make zImage" which is the default make target, but cannot be
reproduced by "make uImage".
HEAD is now at 918327e9b7ffb ubsan: Remove CONFIG_UBSAN_SANITIZE_ALL
$ wget https://download.01.org/0day-ci/archive/20240131/[email protected]/config -O .config
$ sh4-linux-gcc --version
sh4-linux-gcc (GCC) 13.2.0
$ make -j72 CROSS_COMPILE=sh4-linux- ARCH=sh olddefconfig
$ make -j72 CROSS_COMPILE=sh4-linux- ARCH=sh
...
LD arch/sh/boot/compressed/vmlinux
sh4-linux-ld: arch/sh/boot/compressed/misc.o: in function `zlib_inflate_table':
misc.c:(.text+0x670): undefined reference to `__ubsan_handle_shift_out_of_bounds'
sh4-linux-ld: arch/sh/boot/compressed/misc.o: in function `inflate_fast':
misc.c:(.text+0xc5c): undefined reference to `__ubsan_handle_shift_out_of_bounds'
sh4-linux-ld: arch/sh/boot/compressed/misc.o: in function `zlib_inflateReset':
misc.c:(.text+0xd00): undefined reference to `__ubsan_handle_shift_out_of_bounds'
sh4-linux-ld: arch/sh/boot/compressed/misc.o: in function `zlib_inflate':
misc.c:(.text+0x23fc): undefined reference to `__ubsan_handle_shift_out_of_bounds'
sh4-linux-ld: arch/sh/boot/compressed/ashldi3.o: in function `__ashldi3':
ashldi3.c:(.text+0xc8): undefined reference to `__ubsan_handle_shift_out_of_bounds'
make[3]: *** [arch/sh/boot/compressed/Makefile:38: arch/sh/boot/compressed/vmlinux] Error 1
make[2]: *** [arch/sh/boot/Makefile:40: arch/sh/boot/compressed/vmlinux] Error 2
make[1]: *** [arch/sh/Makefile:170: zImage] Error 2
make: *** [Makefile:240: __sub-make] Error 2
$ make -j72 CROSS_COMPILE=sh4-linux- ARCH=sh uImage
...
OBJCOPY arch/sh/boot/vmlinux.bin
GZIP arch/sh/boot/vmlinux.bin.gz
UIMAGE arch/sh/boot/uImage.gz
Image Name: Linux-6.8.0-rc2+
Created: Fri Mar 1 13:31:36 2024
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 9297141 Bytes = 9079.24 KiB = 8.87 MiB
Load Address: 08001000
Entry Point: 08002000
Image arch/sh/boot/uImage is ready
--
Best Regards,
Yujie
Hi Yujie,
On Fri, 2024-03-01 at 05:46 +0000, Liu, Yujie wrote:
> On Wed, 2024-02-14 at 13:52 +0100, John Paul Adrian Glaubitz wrote:
> > Hi Kees,
> >
> > On Mon, 2024-02-12 at 19:45 +0100, John Paul Adrian Glaubitz wrote:
> > > On Mon, 2024-02-12 at 10:26 -0800, Kees Cook wrote:
> > > > > I just wanted to try reproduce the problem again with the reproducer in [1] as well
> > > > > as with gcc-13.2.0, but your branch devel/overflow/ubsan-only no longer exists.
> > > > >
> > > > > Can you tell me where to find the patches now?
> > > >
> > > > Sure, they're in -next, but for an -rc2 based tree, see:
> > > > https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git/log/?h=for-next/kspp
> > >
> > > OK, thanks. I will give it a try with gcc-13.
> >
> > I'm still unable to reproduce the error that the kernel test robot reported.
> >
> > I'm using gcc-13:
> >
> > glaubitz@node54:/data/home/glaubitz/linux-kees> sh4-linux-gcc
> > sh4-linux-gcc: fatal error: no input files
> > compilation terminated.
> > glaubitz@node54:/data/home/glaubitz/linux-kees> sh4-linux-gcc --version
> > sh4-linux-gcc (GCC) 13.2.0
> > Copyright (C) 2023 Free Software Foundation, Inc.
> > This is free software; see the source for copying conditions. There is NO
> > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
> >
> > glaubitz@node54:/data/home/glaubitz/linux-kees>
> >
> > I checked out your tree and the for-next/kspp branch.
> >
> > Then fetched the config that triggered the bug like this:
> >
> > $ wget https://download.01.org/0day-ci/archive/20240131/[email protected]/config -O .config
> >
> > Building the kernel with "make -j32 uImage" works fine. No errors except for
> > some unreleated warnings that still need to be fixed.
>
> Sorry for late reply. Seems like the warnings can be reproduced by
> "make zImage" which is the default make target, but cannot be
> reproduced by "make uImage".
>
> HEAD is now at 918327e9b7ffb ubsan: Remove CONFIG_UBSAN_SANITIZE_ALL
>
> $ wget https://download.01.org/0day-ci/archive/20240131/[email protected]/config -O .config
> $ sh4-linux-gcc --version
> sh4-linux-gcc (GCC) 13.2.0
>
> $ make -j72 CROSS_COMPILE=sh4-linux- ARCH=sh olddefconfig
> $ make -j72 CROSS_COMPILE=sh4-linux- ARCH=sh
> ...
> LD arch/sh/boot/compressed/vmlinux
> sh4-linux-ld: arch/sh/boot/compressed/misc.o: in function `zlib_inflate_table':
> misc.c:(.text+0x670): undefined reference to `__ubsan_handle_shift_out_of_bounds'
> sh4-linux-ld: arch/sh/boot/compressed/misc.o: in function `inflate_fast':
> misc.c:(.text+0xc5c): undefined reference to `__ubsan_handle_shift_out_of_bounds'
> sh4-linux-ld: arch/sh/boot/compressed/misc.o: in function `zlib_inflateReset':
> misc.c:(.text+0xd00): undefined reference to `__ubsan_handle_shift_out_of_bounds'
> sh4-linux-ld: arch/sh/boot/compressed/misc.o: in function `zlib_inflate':
> misc.c:(.text+0x23fc): undefined reference to `__ubsan_handle_shift_out_of_bounds'
> sh4-linux-ld: arch/sh/boot/compressed/ashldi3.o: in function `__ashldi3':
> ashldi3.c:(.text+0xc8): undefined reference to `__ubsan_handle_shift_out_of_bounds'
> make[3]: *** [arch/sh/boot/compressed/Makefile:38: arch/sh/boot/compressed/vmlinux] Error 1
> make[2]: *** [arch/sh/boot/Makefile:40: arch/sh/boot/compressed/vmlinux] Error 2
> make[1]: *** [arch/sh/Makefile:170: zImage] Error 2
> make: *** [Makefile:240: __sub-make] Error 2
>
> $ make -j72 CROSS_COMPILE=sh4-linux- ARCH=sh uImage
> ...
> OBJCOPY arch/sh/boot/vmlinux.bin
> GZIP arch/sh/boot/vmlinux.bin.gz
> UIMAGE arch/sh/boot/uImage.gz
> Image Name: Linux-6.8.0-rc2+
> Created: Fri Mar 1 13:31:36 2024
> Image Type: SuperH Linux Kernel Image (gzip compressed)
> Data Size: 9297141 Bytes = 9079.24 KiB = 8.87 MiB
> Load Address: 08001000
> Entry Point: 08002000
> Image arch/sh/boot/uImage is ready
Thanks a lot for pointing this out. This explains the problem.
I will have another look over the weekend and acknowledge the patch if Kees wants
to pick it up through his own tree.
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913