2024-02-15 11:04:36

by Durai Manickam KR

[permalink] [raw]
Subject: [PATCH] dt-bindings: dma: convert atmel-xdma.txt to YAML

Added a description, required properties and appropriate compatibles
for all the SoCs that are supported by microchip for the XDMAC.

Signed-off-by: Durai Manickam KR <[email protected]>
---
.../devicetree/bindings/dma/atmel-xdma.txt | 54 ---------------
.../bindings/dma/microchip,at91-xdma.yaml | 77 ++++++++++++++++++++++
2 files changed, 77 insertions(+), 54 deletions(-)

diff --git a/Documentation/devicetree/bindings/dma/atmel-xdma.txt b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
deleted file mode 100644
index 76d649b3a25d..000000000000
--- a/Documentation/devicetree/bindings/dma/atmel-xdma.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-* Atmel Extensible Direct Memory Access Controller (XDMAC)
-
-* XDMA Controller
-Required properties:
-- compatible: Should be "atmel,sama5d4-dma", "microchip,sam9x60-dma" or
- "microchip,sama7g5-dma" or
- "microchip,sam9x7-dma", "atmel,sama5d4-dma".
-- reg: Should contain DMA registers location and length.
-- interrupts: Should contain DMA interrupt.
-- #dma-cells: Must be <1>, used to represent the number of integer cells in
-the dmas property of client devices.
- - The 1st cell specifies the channel configuration register:
- - bit 13: SIF, source interface identifier, used to get the memory
- interface identifier,
- - bit 14: DIF, destination interface identifier, used to get the peripheral
- interface identifier,
- - bit 30-24: PERID, peripheral identifier.
-
-Example:
-
-dma1: dma-controller@f0004000 {
- compatible = "atmel,sama5d4-dma";
- reg = <0xf0004000 0x200>;
- interrupts = <50 4 0>;
- #dma-cells = <1>;
-};
-
-
-* DMA clients
-DMA clients connected to the Atmel XDMA controller must use the format
-described in the dma.txt file, using a one-cell specifier for each channel.
-The two cells in order are:
-1. A phandle pointing to the DMA controller.
-2. Channel configuration register. Configurable fields are:
- - bit 13: SIF, source interface identifier, used to get the memory
- interface identifier,
- - bit 14: DIF, destination interface identifier, used to get the peripheral
- interface identifier,
- - bit 30-24: PERID, peripheral identifier.
-
-Example:
-
-i2c2: i2c@f8024000 {
- compatible = "atmel,at91sam9x5-i2c";
- reg = <0xf8024000 0x4000>;
- interrupts = <34 4 6>;
- dmas = <&dma1
- (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
- | AT91_XDMAC_DT_PERID(6))>,
- <&dma1
- (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
- | AT91_XDMAC_DT_PERID(7))>;
- dma-names = "tx", "rx";
-};
diff --git a/Documentation/devicetree/bindings/dma/microchip,at91-xdma.yaml b/Documentation/devicetree/bindings/dma/microchip,at91-xdma.yaml
new file mode 100644
index 000000000000..0bd79c7b5e6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/microchip,at91-xdma.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/microchip,at91-xdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Extensible Direct Memory Access Controller (XDMAC)
+
+maintainers:
+ - Durai Manickam KR <[email protected]>
+
+description: |
+ The Atmel Extensible Direct Memory Access Controller (XDMAC) performs peripheral
+ data transfer and memory move operations over one or two bus ports through the
+ unidirectional communication channel. Each channel is fully programmable and
+ provides both peripheral or memory-to-memory transfers.
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - atmel,sama5d4-dma
+ - microchip,sama7g5-dma
+ - microchip,sam9x7-dma
+ - items:
+ - const: atmel,sama5d4-dma
+ - const: microchip,sam9x60-dma
+ reg:
+ description: Should contain DMA registers location and length.
+ maxItems: 1
+
+ interrupts:
+ description: Should contain the DMA interrupts associated to the DMA channels.
+ maxItems: 1
+
+ "#dma-cells":
+ description: |
+ Must be <1>, used to represent the number of integer cells in the dmas
+ property of client device.
+ -The 1st cell specifies the channel configuration register:
+ -bit 13: SIF, source interface identifier, used to get the memory
+ interface identifier,
+ -bit 14: DIF, destination interface identifier, used to get the peripheral
+ interface identifier,
+ -bit 30-24: PERID, peripheral identifier.
+ const: 1
+
+ clocks:
+ description: Should contain a clock specifier for each entry in clock-names.
+ maxItems: 1
+
+ clock-names:
+ description: Should contain the clock of the DMA controller.
+ const: dma_clk
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - "#dma-cells"
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ dma0: dma-controller@f0004000 {
+ compatible = "atmel,sama5d4-dma";
+ reg = <0xffffec00 0x200>;
+ interrupts = <50 4 0>;
+ #dma-cells = <1>;
+ clocks = <&pmc 2 20>;
+ clock-names = "dma_clk";
+ };
+
+...

---
base-commit: 8d3dea210042f54b952b481838c1e7dfc4ec751d
change-id: 20240215-xdma-36e8bdbf8141

Best regards,
--
Durai Manickam KR <[email protected]>



2024-02-15 19:35:26

by Conor Dooley

[permalink] [raw]
Subject: Re: [PATCH] dt-bindings: dma: convert atmel-xdma.txt to YAML

On Thu, Feb 15, 2024 at 04:25:15PM +0530, Durai Manickam KR wrote:
> Added a description, required properties and appropriate compatibles
> for all the SoCs that are supported by microchip for the XDMAC.
>
> Signed-off-by: Durai Manickam KR <[email protected]>
> ---
> .../devicetree/bindings/dma/atmel-xdma.txt | 54 ---------------
> .../bindings/dma/microchip,at91-xdma.yaml | 77 ++++++++++++++++++++++
> 2 files changed, 77 insertions(+), 54 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/atmel-xdma.txt b/Documentation/devicetree/bindings/dma/atmel-xdma.txt
> deleted file mode 100644
> index 76d649b3a25d..000000000000
> --- a/Documentation/devicetree/bindings/dma/atmel-xdma.txt
> +++ /dev/null
> @@ -1,54 +0,0 @@
> -* Atmel Extensible Direct Memory Access Controller (XDMAC)
> -
> -* XDMA Controller

> -- interrupts: Should contain DMA interrupt.
> -- #dma-cells: Must be <1>, used to represent the number of integer cells in
> -the dmas property of client devices.
> - - The 1st cell specifies the channel configuration register:
> - - bit 13: SIF, source interface identifier, used to get the memory
> - interface identifier,
> - - bit 14: DIF, destination interface identifier, used to get the peripheral
> - interface identifier,
> - - bit 30-24: PERID, peripheral identifier.
> -
> -Example:
> -
> -dma1: dma-controller@f0004000 {
> - compatible = "atmel,sama5d4-dma";
> - reg = <0xf0004000 0x200>;
> - interrupts = <50 4 0>;
> - #dma-cells = <1>;
> -};
> -
> -
> -* DMA clients
> -DMA clients connected to the Atmel XDMA controller must use the format
> -described in the dma.txt file, using a one-cell specifier for each channel.
> -The two cells in order are:
> -1. A phandle pointing to the DMA controller.
> -2. Channel configuration register. Configurable fields are:
> - - bit 13: SIF, source interface identifier, used to get the memory
> - interface identifier,
> - - bit 14: DIF, destination interface identifier, used to get the peripheral
> - interface identifier,
> - - bit 30-24: PERID, peripheral identifier.
> -
> -Example:
> -
> -i2c2: i2c@f8024000 {
> - compatible = "atmel,at91sam9x5-i2c";
> - reg = <0xf8024000 0x4000>;
> - interrupts = <34 4 6>;
> - dmas = <&dma1
> - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
> - | AT91_XDMAC_DT_PERID(6))>,
> - <&dma1
> - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
> - | AT91_XDMAC_DT_PERID(7))>;
> - dma-names = "tx", "rx";
> -};
> diff --git a/Documentation/devicetree/bindings/dma/microchip,at91-xdma.yaml b/Documentation/devicetree/bindings/dma/microchip,at91-xdma.yaml
> new file mode 100644
> index 000000000000..0bd79c7b5e6f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/microchip,at91-xdma.yaml
> @@ -0,0 +1,77 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/dma/microchip,at91-xdma.yaml#

Filename matching a compatible please.

> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Atmel Extensible Direct Memory Access Controller (XDMAC)
> +
> +maintainers:
> + - Durai Manickam KR <[email protected]>
> +
> +description: |

The | is not needed, you've no formatting to preserve.

> + The Atmel Extensible Direct Memory Access Controller (XDMAC) performs peripheral
> + data transfer and memory move operations over one or two bus ports through the
> + unidirectional communication channel. Each channel is fully programmable and
> + provides both peripheral or memory-to-memory transfers.
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - atmel,sama5d4-dma
> + - microchip,sama7g5-dma
> + - microchip,sam9x7-dma

The text binding says:
> -- compatible: Should be "atmel,sama5d4-dma", "microchip,sam9x60-dma" or
> - "microchip,sama7g5-dma" or
> - "microchip,sam9x7-dma", "atmel,sama5d4-dma".
That's not what you have here at all.

> + - items:
> + - const: atmel,sama5d4-dma
> + - const: microchip,sam9x60-dma

This looks backwards.

> + reg:
> + description: Should contain DMA registers location and length.
> + maxItems: 1

Same comments here about descriptions for well known properties as the
other DMA controller.

> +
> + interrupts:
> + description: Should contain the DMA interrupts associated to the DMA channels.
> + maxItems: 1
> +
> + "#dma-cells":
> + description: |
> + Must be <1>, used to represent the number of integer cells in the dmas
> + property of client device.
> + -The 1st cell specifies the channel configuration register:
> + -bit 13: SIF, source interface identifier, used to get the memory
> + interface identifier,
> + -bit 14: DIF, destination interface identifier, used to get the peripheral
> + interface identifier,
> + -bit 30-24: PERID, peripheral identifier.
> + const: 1
> +
> + clocks:
> + description: Should contain a clock specifier for each entry in clock-names.
> + maxItems: 1

And here about adding properties. Please explain in your commit message
where the new properties came from.

> +
> + clock-names:
> + description: Should contain the clock of the DMA controller.
> + const: dma_clk
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - "#dma-cells"
> + - clocks
> + - clock-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + dma0: dma-controller@f0004000 {

And same here about the label :)

Cheers,
Conor.

> + compatible = "atmel,sama5d4-dma";
> + reg = <0xffffec00 0x200>;
> + interrupts = <50 4 0>;
> + #dma-cells = <1>;
> + clocks = <&pmc 2 20>;
> + clock-names = "dma_clk";
> + };
> +
> +...
>
> ---
> base-commit: 8d3dea210042f54b952b481838c1e7dfc4ec751d
> change-id: 20240215-xdma-36e8bdbf8141
>
> Best regards,
> --
> Durai Manickam KR <[email protected]>
>


Attachments:
(No filename) (6.08 kB)
signature.asc (235.00 B)
Download all attachments