2024-02-23 17:37:06

by Varshini Rajendran

Subject: [PATCH v4 35/39] ARM: at91: Kconfig: add config flag for SAM9X7 SoC

Add config flag for sam9x7 SoC.

Signed-off-by: Varshini Rajendran <[email protected]>
Reviewed-by: Claudiu Beznea <[email protected]>
---
Changes in v4:
- Updated Reviewed-by tag
---
arch/arm/mach-at91/Kconfig | 23 ++++++++++++++++++++---
1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index a8c022b4c053..49d38a3a47de 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -141,11 +141,28 @@ config SOC_SAM9X60
help
Select this if you are using Microchip's SAM9X60 SoC

+config SOC_SAM9X7
+ bool "SAM9X7"
+ depends on ARCH_MULTI_V5
+ select ATMEL_AIC5_IRQ
+ select ATMEL_PM if PM
+ select ATMEL_SDRAMC
+ select CPU_ARM926T
+ select HAVE_AT91_USB_CLK
+ select HAVE_AT91_GENERATED_CLK
+ select HAVE_AT91_SAM9X60_PLL
+ select MEMORY
+ select PINCTRL_AT91
+ select SOC_SAM_V4_V5
+ select SRAM if PM
+ help
+ Select this if you are using Microchip's SAM9X7 SoC
+
comment "Clocksource driver selection"

config ATMEL_CLOCKSOURCE_PIT
bool "Periodic Interval Timer (PIT) support"
- depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
+ depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5
default SOC_AT91SAM9 || SOC_SAMA5
select ATMEL_PIT
help
@@ -155,7 +172,7 @@ config ATMEL_CLOCKSOURCE_PIT

config ATMEL_CLOCKSOURCE_TCB
bool "Timer Counter Blocks (TCB) support"
- default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
+ default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5
select ATMEL_TCB_CLKSRC
help
Select this to get a high precision clocksource based on a
@@ -166,7 +183,7 @@ config ATMEL_CLOCKSOURCE_TCB

config MICROCHIP_CLOCKSOURCE_PIT64B
bool "64-bit Periodic Interval Timer (PIT64B) support"
- default SOC_SAM9X60 || SOC_SAMA7
+ default SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA7
select MICROCHIP_PIT64B
help
Select this to get a high resolution clockevent (SAM9X60) or
--
2.25.1

2024-03-03 12:23:05

by claudiu beznea

Subject: Re: [PATCH v4 35/39] ARM: at91: Kconfig: add config flag for SAM9X7 SoC

On 23.02.2024 19:30, Varshini Rajendran wrote:
> Add config flag for sam9x7 SoC.
>
> Signed-off-by: Varshini Rajendran <[email protected]>
> Reviewed-by: Claudiu Beznea <[email protected]>
> ---
> Changes in v4:
> - Updated Reviewed-by tag
> ---
> arch/arm/mach-at91/Kconfig | 23 ++++++++++++++++++++---
> 1 file changed, 20 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index a8c022b4c053..49d38a3a47de 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -141,11 +141,28 @@ config SOC_SAM9X60
> help
> Select this if you are using Microchip's SAM9X60 SoC
>
> +config SOC_SAM9X7
> + bool "SAM9X7"
> + depends on ARCH_MULTI_V5
> + select ATMEL_AIC5_IRQ
> + select ATMEL_PM if PM
> + select ATMEL_SDRAMC

This flag doesn't exist anymore.

> + select CPU_ARM926T
> + select HAVE_AT91_USB_CLK
> + select HAVE_AT91_GENERATED_CLK
> + select HAVE_AT91_SAM9X60_PLL
> + select MEMORY
> + select PINCTRL_AT91
> + select SOC_SAM_V4_V5
> + select SRAM if PM
> + help
> + Select this if you are using Microchip's SAM9X7 SoC
> +
> comment "Clocksource driver selection"
>
> config ATMEL_CLOCKSOURCE_PIT
> bool "Periodic Interval Timer (PIT) support"
> - depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
> + depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5
> default SOC_AT91SAM9 || SOC_SAMA5
> select ATMEL_PIT
> help
> @@ -155,7 +172,7 @@ config ATMEL_CLOCKSOURCE_PIT
>
> config ATMEL_CLOCKSOURCE_TCB
> bool "Timer Counter Blocks (TCB) support"
> - default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
> + default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5
> select ATMEL_TCB_CLKSRC
> help
> Select this to get a high precision clocksource based on a
> @@ -166,7 +183,7 @@ config ATMEL_CLOCKSOURCE_TCB
>
> config MICROCHIP_CLOCKSOURCE_PIT64B
> bool "64-bit Periodic Interval Timer (PIT64B) support"
> - default SOC_SAM9X60 || SOC_SAMA7
> + default SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA7
> select MICROCHIP_PIT64B
> help
> Select this to get a high resolution clockevent (SAM9X60) or