Convert adc128d818 bindings to dtschema to support validation.
Signed-off-by: Javier Carrasco <[email protected]>
---
.../devicetree/bindings/hwmon/adc128d818.txt | 38 -------------
.../devicetree/bindings/hwmon/ti,adc128d818.yaml | 63 ++++++++++++++++++++++
2 files changed, 63 insertions(+), 38 deletions(-)
diff --git a/Documentation/devicetree/bindings/hwmon/adc128d818.txt b/Documentation/devicetree/bindings/hwmon/adc128d818.txt
deleted file mode 100644
index d0ae46d7bac3..000000000000
--- a/Documentation/devicetree/bindings/hwmon/adc128d818.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-TI ADC128D818 ADC System Monitor With Temperature Sensor
---------------------------------------------------------
-
-Operation modes:
-
- - Mode 0: 7 single-ended voltage readings (IN0-IN6),
- 1 temperature reading (internal)
- - Mode 1: 8 single-ended voltage readings (IN0-IN7),
- no temperature
- - Mode 2: 4 pseudo-differential voltage readings
- (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6),
- 1 temperature reading (internal)
- - Mode 3: 4 single-ended voltage readings (IN0-IN3),
- 2 pseudo-differential voltage readings
- (IN4-IN5, IN7-IN6),
- 1 temperature reading (internal)
-
-If no operation mode is configured via device tree, the driver keeps the
-currently active chip operation mode (default is mode 0).
-
-
-Required node properties:
-
- - compatible: must be set to "ti,adc128d818"
- - reg: I2C address of the device
-
-Optional node properties:
-
- - ti,mode: Operation mode (u8) (see above).
-
-
-Example (operation mode 2):
-
- adc128d818@1d {
- compatible = "ti,adc128d818";
- reg = <0x1d>;
- ti,mode = /bits/ 8 <2>;
- };
diff --git a/Documentation/devicetree/bindings/hwmon/ti,adc128d818.yaml b/Documentation/devicetree/bindings/hwmon/ti,adc128d818.yaml
new file mode 100644
index 000000000000..b48a9841600e
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ti,adc128d818.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,adc128d818.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADC128D818 ADC System Monitor With Temperature Sensor
+
+maintainers:
+ - Javier Carrasco <[email protected]>
+
+description: |
+ The ADC128D818 is a 12-Bit, 8-Channel Analog to Digital Converter (ADC)
+ with a temperature sensor and an I2C interface.
+
+ Datasheets:
+ https://www.ti.com/product/ADC128D818
+
+properties:
+ compatible:
+ const: ti,adc128d818
+
+ reg:
+ maxItems: 1
+
+ ti,mode:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ description:
+ Operation mode.
+ Mode 0 - 7 single-ended voltage readings (IN0-IN6), 1 temperature
+ reading (internal).
+ Mode 1 - 8 single-ended voltage readings (IN0-IN7), no temperature.
+ Mode 2 - 4 pseudo-differential voltage readings
+ (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6), 1 temperature reading (internal).
+ Mode 3 - 4 single-ended voltage readings (IN0-IN3), 2 pseudo-differential
+ voltage readings (IN4-IN5, IN7-IN6), 1 temperature reading (internal).
+ default: 0
+
+ vref-supply:
+ description:
+ The regulator to use as an external reference. If it does not exist, the
+ internal reference will be used.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ adc@1d {
+ compatible = "ti,adc128d818";
+ reg = <0x1d>;
+ vref-supply = <&vref>;
+ ti,mode = /bits/ 8 <2>;
+ };
+ };
---
base-commit: bf3a69c6861ff4dc7892d895c87074af7bc1c400
change-id: 20240318-adc128d818_dtschema-02b78fc26f65
Best regards,
--
Javier Carrasco <[email protected]>
On 18/03/2024 21:12, Javier Carrasco wrote:
> Convert adc128d818 bindings to dtschema to support validation.
>
> Signed-off-by: Javier Carrasco <[email protected]>
Thank you for your patch. There is something to discuss/improve.
> +$id: http://devicetree.org/schemas/hwmon/ti,adc128d818.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments ADC128D818 ADC System Monitor With Temperature Sensor
> +
> +maintainers:
> + - Javier Carrasco <[email protected]>
> +
> +description: |
> + The ADC128D818 is a 12-Bit, 8-Channel Analog to Digital Converter (ADC)
> + with a temperature sensor and an I2C interface.
> +
> + Datasheets:
> + https://www.ti.com/product/ADC128D818
> +
> +properties:
> + compatible:
> + const: ti,adc128d818
> +
> + reg:
> + maxItems: 1
> +
> + ti,mode:
You need | to preserve the formatting.
With this:
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Best regards,
Krzysztof
On 3/19/24 06:49, Krzysztof Kozlowski wrote:
> On 18/03/2024 21:12, Javier Carrasco wrote:
>> Convert adc128d818 bindings to dtschema to support validation.
>>
>> Signed-off-by: Javier Carrasco <[email protected]>
>
> Thank you for your patch. There is something to discuss/improve.
>
>
>> +$id: http://devicetree.org/schemas/hwmon/ti,adc128d818.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Texas Instruments ADC128D818 ADC System Monitor With Temperature Sensor
>> +
>> +maintainers:
>> + - Javier Carrasco <[email protected]>
>> +
>> +description: |
>> + The ADC128D818 is a 12-Bit, 8-Channel Analog to Digital Converter (ADC)
>> + with a temperature sensor and an I2C interface.
>> +
>> + Datasheets:
>> + https://www.ti.com/product/ADC128D818
>> +
>> +properties:
>> + compatible:
>> + const: ti,adc128d818
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + ti,mode:
>
> You need | to preserve the formatting.
>
Thanks, I overlooked that. If I am not mistaken, 2 are still missing
(ti,mode and vref-supply descriptions).
By the way, do you know why dtschema does not complain about that? If I
place a '|' in a wrong place, it does complain, though.
> With this:
>
> Reviewed-by: Krzysztof Kozlowski <[email protected]>
>
> Best regards,
> Krzysztof
>
Best regards,
Javier Carrasco
On 19/03/2024 08:01, Javier Carrasco wrote:
> On 3/19/24 06:49, Krzysztof Kozlowski wrote:
>> On 18/03/2024 21:12, Javier Carrasco wrote:
>>> Convert adc128d818 bindings to dtschema to support validation.
>>>
>>> Signed-off-by: Javier Carrasco <[email protected]>
>>
>> Thank you for your patch. There is something to discuss/improve.
>>
>>
>>> +$id: http://devicetree.org/schemas/hwmon/ti,adc128d818.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Texas Instruments ADC128D818 ADC System Monitor With Temperature Sensor
>>> +
>>> +maintainers:
>>> + - Javier Carrasco <[email protected]>
>>> +
>>> +description: |
>>> + The ADC128D818 is a 12-Bit, 8-Channel Analog to Digital Converter (ADC)
>>> + with a temperature sensor and an I2C interface.
>>> +
>>> + Datasheets:
>>> + https://www.ti.com/product/ADC128D818
>>> +
>>> +properties:
>>> + compatible:
>>> + const: ti,adc128d818
>>> +
>>> + reg:
>>> + maxItems: 1
>>> +
>>> + ti,mode:
>>
>> You need | to preserve the formatting.
>>
>
> Thanks, I overlooked that. If I am not mistaken, 2 are still missing
> (ti,mode and vref-supply descriptions).
No, although I commented in a bit wrong place. It should be in
description of ti,mode. Not in vref-supply.
>
> By the way, do you know why dtschema does not complain about that? If I
> place a '|' in a wrong place, it does complain, though.
This is formatting, there is no reason to complain. How would dtschema
understand that you want or not want formatting?
Best regards,
Krzysztof