2024-04-04 13:37:08

by POPESCU Catalin

Subject: [PATCH net-next v3] net: phy: dp8382x: keep WOL settings across suspends

Unlike other ethernet PHYs from TI, PHY dp8382x has WOL enabled
at reset. The driver explicitly disables WOL in config_init callback
which is called during init and during resume from suspend. Hence,
WOL is unconditionally disabled during resume, even if it was enabled
before the suspend. We make sure that WOL configuration is persistent
across suspends.

Signed-off-by: Catalin Popescu <[email protected]>
---
Changes in v3:
- rename function _dp83822_set_wol to dp83822_config_wol
---
drivers/net/phy/dp83822.c | 37 ++++++++++++++++++++++++-------------
1 file changed, 24 insertions(+), 13 deletions(-)

diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index c3426a17e6d0..efeb643c1373 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -140,10 +140,11 @@ struct dp83822_private {
u16 fx_sd_enable;
u8 cfg_dac_minus;
u8 cfg_dac_plus;
+ struct ethtool_wolinfo wol;
};

-static int dp83822_set_wol(struct phy_device *phydev,
- struct ethtool_wolinfo *wol)
+static int dp83822_config_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
{
struct net_device *ndev = phydev->attached_dev;
u16 value;
@@ -197,10 +198,25 @@ static int dp83822_set_wol(struct phy_device *phydev,
MII_DP83822_WOL_CFG, value);
} else {
return phy_clear_bits_mmd(phydev, DP83822_DEVADDR,
- MII_DP83822_WOL_CFG, DP83822_WOL_EN);
+ MII_DP83822_WOL_CFG,
+ DP83822_WOL_EN |
+ DP83822_WOL_MAGIC_EN |
+ DP83822_WOL_SECURE_ON);
}
}

+static int dp83822_set_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol)
+{
+ struct dp83822_private *dp83822 = phydev->priv;
+ int ret;
+
+ ret = dp83822_config_wol(phydev, wol);
+ if (!ret)
+ memcpy(&dp83822->wol, wol, sizeof(*wol));
+ return ret;
+}
+
static void dp83822_get_wol(struct phy_device *phydev,
struct ethtool_wolinfo *wol)
{
@@ -346,13 +362,6 @@ static irqreturn_t dp83822_handle_interrupt(struct phy_device *phydev)
return IRQ_HANDLED;
}

-static int dp8382x_disable_wol(struct phy_device *phydev)
-{
- return phy_clear_bits_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG,
- DP83822_WOL_EN | DP83822_WOL_MAGIC_EN |
- DP83822_WOL_SECURE_ON);
-}
-
static int dp83822_read_status(struct phy_device *phydev)
{
struct dp83822_private *dp83822 = phydev->priv;
@@ -496,7 +505,7 @@ static int dp83822_config_init(struct phy_device *phydev)
return err;
}
}
- return dp8382x_disable_wol(phydev);
+ return dp83822_config_wol(phydev, &dp83822->wol);
}

static int dp83826_config_rmii_mode(struct phy_device *phydev)
@@ -575,12 +584,14 @@ static int dp83826_config_init(struct phy_device *phydev)
return ret;
}

- return dp8382x_disable_wol(phydev);
+ return dp83822_config_wol(phydev, &dp83822->wol);
}

static int dp8382x_config_init(struct phy_device *phydev)
{
- return dp8382x_disable_wol(phydev);
+ struct dp83822_private *dp83822 = phydev->priv;
+
+ return dp83822_config_wol(phydev, &dp83822->wol);
}

static int dp83822_phy_reset(struct phy_device *phydev)

base-commit: 2b3d5988ae2cb5cd945ddbc653f0a71706231fdd
prerequisite-patch-id: 0000000000000000000000000000000000000000
--
2.34.1

2024-04-08 07:47:55

by Simon Horman

Subject: Re: [PATCH net-next v3] net: phy: dp8382x: keep WOL settings across suspends

On Thu, Apr 04, 2024 at 03:05:16PM +0200, Catalin Popescu wrote:
> Unlike other ethernet PHYs from TI, PHY dp8382x has WOL enabled
> at reset. The driver explicitly disables WOL in config_init callback
> which is called during init and during resume from suspend. Hence,
> WOL is unconditionally disabled during resume, even if it was enabled
> before the suspend. We make sure that WOL configuration is persistent
> across suspends.
>
> Signed-off-by: Catalin Popescu <[email protected]>
> ---
> Changes in v3:
> - rename function _dp83822_set_wol to dp83822_config_wol

Reviewed-by: Simon Horman <[email protected]>