The wrong port config is being used if the PCS is reconfigured. Fix this
by correctly using the new config instead of the old one.
Fixes: 946e7fd5053a ("net: sparx5: add port module support")
Signed-off-by: Daniel Machon <[email protected]>
---
Changes in v2:
- Rewrite subject and commit description
- Link to v1: https://lore.kernel.org/r/20240405-link-mode-reconfiguration-fix-v1-1-c1480bc2346a@microchip.com
---
drivers/net/ethernet/microchip/sparx5/sparx5_port.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_port.c b/drivers/net/ethernet/microchip/sparx5/sparx5_port.c
index 3a1b1a1f5a19..60dd2fd603a8 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_port.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_port.c
@@ -731,7 +731,7 @@ static int sparx5_port_pcs_low_set(struct sparx5 *sparx5,
bool sgmii = false, inband_aneg = false;
int err;
- if (port->conf.inband) {
+ if (conf->inband) {
if (conf->portmode == PHY_INTERFACE_MODE_SGMII ||
conf->portmode == PHY_INTERFACE_MODE_QSGMII)
inband_aneg = true; /* Cisco-SGMII in-band-aneg */
@@ -948,7 +948,7 @@ int sparx5_port_pcs_set(struct sparx5 *sparx5,
if (err)
return -EINVAL;
- if (port->conf.inband) {
+ if (conf->inband) {
/* Enable/disable 1G counters in ASM */
spx5_rmw(ASM_PORT_CFG_CSC_STAT_DIS_SET(high_speed_dev),
ASM_PORT_CFG_CSC_STAT_DIS,
---
base-commit: 1c25fe9a044d5334153a3585754b26553f8287b9
change-id: 20240305-link-mode-reconfiguration-fix-df961fef5505
Best regards,
--
Daniel Machon <[email protected]>
On 4/9/2024 3:41 AM, Daniel Machon wrote:
> The wrong port config is being used if the PCS is reconfigured. Fix this
> by correctly using the new config instead of the old one.
>
> Fixes: 946e7fd5053a ("net: sparx5: add port module support")
> Signed-off-by: Daniel Machon <[email protected]>
> ---
Reviewed-by: Jacob Keller <[email protected]>
> Changes in v2:
> - Rewrite subject and commit description
> - Link to v1: https://lore.kernel.org/r/20240405-link-mode-reconfiguration-fix-v1-1-c1480bc2346a@microchip.com
> ---
> drivers/net/ethernet/microchip/sparx5/sparx5_port.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_port.c b/drivers/net/ethernet/microchip/sparx5/sparx5_port.c
> index 3a1b1a1f5a19..60dd2fd603a8 100644
> --- a/drivers/net/ethernet/microchip/sparx5/sparx5_port.c
> +++ b/drivers/net/ethernet/microchip/sparx5/sparx5_port.c
> @@ -731,7 +731,7 @@ static int sparx5_port_pcs_low_set(struct sparx5 *sparx5,
> bool sgmii = false, inband_aneg = false;
> int err;
>
> - if (port->conf.inband) {
> + if (conf->inband) {
> if (conf->portmode == PHY_INTERFACE_MODE_SGMII ||
> conf->portmode == PHY_INTERFACE_MODE_QSGMII)
> inband_aneg = true; /* Cisco-SGMII in-band-aneg */
> @@ -948,7 +948,7 @@ int sparx5_port_pcs_set(struct sparx5 *sparx5,
> if (err)
> return -EINVAL;
>
> - if (port->conf.inband) {
> + if (conf->inband) {
> /* Enable/disable 1G counters in ASM */
> spx5_rmw(ASM_PORT_CFG_CSC_STAT_DIS_SET(high_speed_dev),
> ASM_PORT_CFG_CSC_STAT_DIS,
>
> ---
> base-commit: 1c25fe9a044d5334153a3585754b26553f8287b9
> change-id: 20240305-link-mode-reconfiguration-fix-df961fef5505
>
> Best regards,
Hello:
This patch was applied to netdev/net.git (main)
by Paolo Abeni <[email protected]>:
On Tue, 9 Apr 2024 12:41:59 +0200 you wrote:
> The wrong port config is being used if the PCS is reconfigured. Fix this
> by correctly using the new config instead of the old one.
>
> Fixes: 946e7fd5053a ("net: sparx5: add port module support")
> Signed-off-by: Daniel Machon <[email protected]>
> ---
> Changes in v2:
> - Rewrite subject and commit description
> - Link to v1: https://lore.kernel.org/r/20240405-link-mode-reconfiguration-fix-v1-1-c1480bc2346a@microchip.com
>
> [...]
Here is the summary with links:
- [net,v2] net: sparx5: fix wrong config being used when reconfiguring PCS
https://git.kernel.org/netdev/net/c/33623113a48e
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html