No new warning added by
make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j8 CHECK_DTBS=y freescale/imx8qm-mek.dtb
Signed-off-by: Frank Li <[email protected]>
---
Frank Li (10):
arm64: dts: imx8-ss-audio: remove memory-region = <&dsp_reserved>;
arm64: dts: imx8qm-ss-audio: add audio nodes
arm64: dts: imx8qm-mek: add sai and wm8960 support
arm64: dts: imx8x: add cm41 subsystem dtsi
arm64: dts: imx8qm-mek: add i2c0 and children devices
arm64: dts: imx8qm-mek: add cm41_i2c and children devices
arm64: dts: imx8qm-mek: add flexcan support
arm64: dts: imx8qm-mek: add lsio mu5 and mu6
arm64: dts: imx8qm: add ocopt and fec_mac[0,1]
arm64: dts: imx8qm-mek: add fec2 support
arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi | 1 -
arch/arm64/boot/dts/freescale/imx8-ss-cm41.dtsi | 68 +++
arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 345 +++++++++++++++
arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi | 473 +++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8qm.dtsi | 102 +++++
5 files changed, 988 insertions(+), 1 deletion(-)
---
base-commit: eda9714fe6d9e6e5690992ce7dd42b13a5be7803
change-id: 20240402-dts_8qm_audio-e1e1697c9bf6
Best regards,
---
Frank Li <[email protected]>
Add sai[0,1,6,7], wm8960 and asrc0 support.
Signed-off-by: Frank Li <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 140 +++++++++++++++++++++++++++
1 file changed, 140 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 5c6b39c6933fc..9dd84126493ef 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -46,6 +46,47 @@ reg_vref_1v8: regulator-adc-vref {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
+
+ bt_sco_codec: bt_sco_codec {
+ #sound-dai-cells = <1>;
+ compatible = "linux,bt-sco";
+ };
+
+ sound-bt-sco {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "bt-sco-audio";
+ simple-audio-card,format = "dsp_a";
+ simple-audio-card,bitclock-inversion;
+ simple-audio-card,frame-master = <&btcpu>;
+ simple-audio-card,bitclock-master = <&btcpu>;
+
+ btcpu: simple-audio-card,cpu {
+ sound-dai = <&sai0>;
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <16>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&bt_sco_codec 1>;
+ };
+ };
+
+ sound-wm8960 {
+ compatible = "fsl,imx-audio-wm8960";
+ model = "wm8960-audio";
+ audio-cpu = <&sai1>;
+ audio-codec = <&wm8960>;
+ hp-det-gpio = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
+ audio-routing =
+ "Headphone Jack", "HP_L",
+ "Headphone Jack", "HP_R",
+ "Ext Spk", "SPK_LP",
+ "Ext Spk", "SPK_LN",
+ "Ext Spk", "SPK_RP",
+ "Ext Spk", "SPK_RN",
+ "LINPUT1", "Mic Jack",
+ "Mic Jack", "MICB";
+ };
};
&adc0 {
@@ -65,6 +106,77 @@ &i2c1 {
scl-gpios = <&lsio_gpio0 14 GPIO_ACTIVE_HIGH>;
sda-gpios = <&lsio_gpio0 15 GPIO_ACTIVE_HIGH>;
status = "okay";
+
+ wm8960: wm8960@1a {
+ compatible = "wlf,wm8960";
+ reg = <0x1a>;
+ clocks = <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+ clock-names = "mclk";
+ wlf,shared-lrclk;
+ wlf,hp-cfg = <2 2 3>;
+ wlf,gpio-cfg = <1 3>;
+ assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+ <&mclkout0_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <786432000>, <49152000>, <12288000>, <12288000>;
+ };
+};
+
+&asrc0 {
+ fsl,asrc-rate = <48000>;
+ status = "okay";
+};
+
+&amix {
+ status = "okay";
+};
+
+&sai0 {
+ #sound-dai-cells = <0>;
+ assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+ <&sai0_lpcg IMX_LPCG_CLK_4>;
+ assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai0>;
+ status = "okay";
+};
+
+&sai1 {
+ assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
+ <&sai1_lpcg IMX_LPCG_CLK_4>; /* FIXME: should be sai1, original code is 0 */
+ assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai1>;
+ status = "okay";
+};
+
+&sai6 {
+ assigned-clocks = <&acm IMX_ADMA_ACM_SAI6_MCLK_SEL>,
+ <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>,
+ <&sai6_lpcg IMX_LPCG_CLK_4>;
+ assigned-clock-parents = <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <0>, <786432000>, <98304000>, <12288000>, <98304000>;
+ fsl,sai-asynchronous;
+ status = "okay";
+};
+
+&sai7 {
+ assigned-clocks = <&acm IMX_ADMA_ACM_SAI7_MCLK_SEL>,
+ <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_PLL>,
+ <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_SLV_BUS>,
+ <&clk IMX_SC_R_AUDIO_PLL_1 IMX_SC_PM_CLK_MST_BUS>,
+ <&sai7_lpcg IMX_LPCG_CLK_4>;
+ assigned-clock-parents = <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>;
+ assigned-clock-rates = <0>, <786432000>, <98304000>, <12288000>, <98304000>;
+ fsl,sai-asynchronous;
+ status = "okay";
};
&lpuart0 {
@@ -161,6 +273,16 @@ &usdhc2 {
};
&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ IMX8QM_MCLK_OUT0_AUD_ACM_MCLK_OUT0 0x0600004c
+ IMX8QM_SCU_GPIO0_03_LSIO_GPIO0_IO31 0x0600004c
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
IMX8QM_GPT0_CLK_DMA_I2C1_SCL 0x0600004c
@@ -256,6 +378,24 @@ IMX8QM_M41_GPIO0_01_DMA_UART3_TX 0x06000020
>;
};
+ pinctrl_sai0: sai0grp {
+ fsl,pins = <
+ IMX8QM_SPI0_CS1_AUD_SAI0_TXC 0x0600004c
+ IMX8QM_SPI2_CS1_AUD_SAI0_TXFS 0x0600004c
+ IMX8QM_SAI1_RXFS_AUD_SAI0_RXD 0x0600004c
+ IMX8QM_SAI1_RXC_AUD_SAI0_TXD 0x0600006c
+ >;
+ };
+
+ pinctrl_sai1: sai1grp {
+ fsl,pins = <
+ IMX8QM_SAI1_RXD_AUD_SAI1_RXD 0x06000040
+ IMX8QM_SAI1_TXFS_AUD_SAI1_TXFS 0x06000040
+ IMX8QM_SAI1_TXD_AUD_SAI1_TXD 0x06000060
+ IMX8QM_SAI1_TXC_AUD_SAI1_TXC 0x06000040
+ >;
+ };
+
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
--
2.34.1
Add i2c0 and all devices under it for imx8qm-mek board.
Signed-off-by: Frank Li <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 50 ++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 9dd84126493ef..d321876754e9b 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -96,6 +96,49 @@ &adc0 {
status = "okay";
};
+&i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+ status = "okay";
+
+ lsm303arg@19 {
+ compatible = "st,lsm303agr-accel";
+ reg = <0x19>;
+ };
+
+ fxas21002c@20 {
+ compatible = "nxp,fxas21002c";
+ reg = <0x20>;
+ };
+
+ isl29023@44 {
+ compatible = "isil,isl29023";
+ reg = <0x44>;
+ interrupt-parent = <&lsio_gpio4>;
+ interrupts = <11 2>;
+ };
+
+ mpl3115@60 {
+ compatible = "fsl,mpl3115";
+ reg = <0x60>;
+ };
+
+ max7322: gpio@68 {
+ compatible = "maxim,max7322";
+ reg = <0x68>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ l3g4250@69 {
+ compatible = "st,l3g4200d-gyro";
+ reg = <0x69>;
+ };
+};
+
&i2c1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -283,6 +326,13 @@ IMX8QM_SCU_GPIO0_03_LSIO_GPIO0_IO31 0x0600004c
>;
};
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ IMX8QM_HDMI_TX0_TS_SCL_DMA_I2C0_SCL 0x06000021
+ IMX8QM_HDMI_TX0_TS_SDA_DMA_I2C0_SDA 0x06000021
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
IMX8QM_GPT0_CLK_DMA_I2C1_SCL 0x0600004c
--
2.34.1
Add flexcan[1,2,3] support for imx8qm-mek board.
Signed-off-by: Frank Li <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 80 ++++++++++++++++++++++++++++
1 file changed, 80 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 4b87e13923328..94a4195d92320 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -40,6 +40,44 @@ reg_usdhc2_vmmc: usdhc2-vmmc {
enable-active-high;
};
+ reg_can01_en: regulator-can01-gen {
+ compatible = "regulator-fixed";
+ regulator-name = "can01-en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pca6416 3 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can2_en: regulator-can2-gen {
+ compatible = "regulator-fixed";
+ regulator-name = "can2-en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pca6416 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_can01_stby: regulator-can01-stby {
+ compatible = "regulator-fixed";
+ regulator-name = "can01-stby";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pca6416 5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_can01_en>;
+ };
+
+ reg_can2_stby: regulator-can2-stby {
+ compatible = "regulator-fixed";
+ regulator-name = "can2-stby";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pca6416 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_can2_en>;
+ };
+
reg_vref_1v8: regulator-adc-vref {
compatible = "regulator-fixed";
regulator-name = "vref_1v8";
@@ -242,6 +280,27 @@ &cm41_intmux {
status = "okay";
};
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can01_stby>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_can01_stby>;
+ status = "okay";
+};
+
+&flexcan3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan3>;
+ xceiver-supply = <®_can2_stby>;
+ status = "okay";
+};
+
&lpuart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
@@ -434,6 +493,27 @@ IMX8QM_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B 0x06000021
>;
};
+ pinctrl_flexcan1: flexcan0grp {
+ fsl,pins = <
+ IMX8QM_FLEXCAN0_TX_DMA_FLEXCAN0_TX 0x21
+ IMX8QM_FLEXCAN0_RX_DMA_FLEXCAN0_RX 0x21
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan1grp {
+ fsl,pins = <
+ IMX8QM_FLEXCAN1_TX_DMA_FLEXCAN1_TX 0x21
+ IMX8QM_FLEXCAN1_RX_DMA_FLEXCAN1_RX 0x21
+ >;
+ };
+
+ pinctrl_flexcan3: flexcan3grp {
+ fsl,pins = <
+ IMX8QM_FLEXCAN2_TX_DMA_FLEXCAN2_TX 0x21
+ IMX8QM_FLEXCAN2_RX_DMA_FLEXCAN2_RX 0x21
+ >;
+ };
+
pinctrl_lpuart0: lpuart0grp {
fsl,pins = <
IMX8QM_UART0_RX_DMA_UART0_RX 0x06000020
--
2.34.1
Add lsio mu5 and mu6.
Signed-off-by: Frank Li <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 94a4195d92320..da17161055179 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -260,6 +260,14 @@ &sai7 {
status = "okay";
};
+&lsio_mu5 {
+ status = "okay";
+};
+
+&lsio_mu6 {
+ status = "okay";
+};
+
&cm41_i2c {
#address-cells = <1>;
#size-cells = <0>;
--
2.34.1
Add fec2 support.
Signed-off-by: Frank Li <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 40 ++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index da17161055179..84372c060e200 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -40,6 +40,15 @@ reg_usdhc2_vmmc: usdhc2-vmmc {
enable-active-high;
};
+ reg_fec2_supply: fec2_nvcc {
+ compatible = "regulator-fixed";
+ regulator-name = "fec2_nvcc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&max7322 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_can01_en: regulator-can01-gen {
compatible = "regulator-fixed";
regulator-name = "can01-en";
@@ -382,6 +391,19 @@ ethphy1: ethernet-phy@1 {
};
};
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec2>;
+ phy-mode = "rgmii-txid";
+ phy-handle = <ðphy1>;
+ phy-supply = <®_fec2_supply>;
+ fsl,magic-packet;
+ nvmem-cells = <&fec_mac1>;
+ nvmem-cell-names = "mac-address";
+ rx-internal-delay-ps = <2000>;
+ status = "okay";
+};
+
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
@@ -501,6 +523,24 @@ IMX8QM_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B 0x06000021
>;
};
+ pinctrl_fec2: fec2grp {
+ fsl,pins = <
+ IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD 0x000014a0
+ IMX8QM_ENET1_RGMII_TX_CTL_CONN_ENET1_RGMII_TX_CTL 0x00000060
+ IMX8QM_ENET1_RGMII_TXC_CONN_ENET1_RGMII_TXC 0x00000060
+ IMX8QM_ENET1_RGMII_TXD0_CONN_ENET1_RGMII_TXD0 0x00000060
+ IMX8QM_ENET1_RGMII_TXD1_CONN_ENET1_RGMII_TXD1 0x00000060
+ IMX8QM_ENET1_RGMII_TXD2_CONN_ENET1_RGMII_TXD2 0x00000060
+ IMX8QM_ENET1_RGMII_TXD3_CONN_ENET1_RGMII_TXD3 0x00000060
+ IMX8QM_ENET1_RGMII_RXC_CONN_ENET1_RGMII_RXC 0x00000060
+ IMX8QM_ENET1_RGMII_RX_CTL_CONN_ENET1_RGMII_RX_CTL 0x00000060
+ IMX8QM_ENET1_RGMII_RXD0_CONN_ENET1_RGMII_RXD0 0x00000060
+ IMX8QM_ENET1_RGMII_RXD1_CONN_ENET1_RGMII_RXD1 0x00000060
+ IMX8QM_ENET1_RGMII_RXD2_CONN_ENET1_RGMII_RXD2 0x00000060
+ IMX8QM_ENET1_RGMII_RXD3_CONN_ENET1_RGMII_RXD3 0x00000060
+ >;
+ };
+
pinctrl_flexcan1: flexcan0grp {
fsl,pins = <
IMX8QM_FLEXCAN0_TX_DMA_FLEXCAN0_TX 0x21
--
2.34.1
Add cm41_i2c and devices under it for imx8qm-mek board.
Signed-off-by: Frank Li <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index d321876754e9b..4b87e13923328 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -222,6 +222,26 @@ &sai7 {
status = "okay";
};
+&cm41_i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cm41_i2c>;
+ status = "okay";
+
+ pca6416: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
+
+&cm41_intmux {
+ status = "okay";
+};
+
&lpuart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
@@ -353,6 +373,13 @@ IMX8QM_ADC_IN0_DMA_ADC0_IN0 0xc0000060
>;
};
+ pinctrl_cm41_i2c: cm41i2cgrp {
+ fsl,pins = <
+ IMX8QM_M41_I2C0_SDA_M41_I2C0_SDA 0x0600004c
+ IMX8QM_M41_I2C0_SCL_M41_I2C0_SCL 0x0600004c
+ >;
+ };
+
pinctrl_fec1: fec1grp {
fsl,pins = <
IMX8QM_ENET0_MDC_CONN_ENET0_MDC 0x06000020
--
2.34.1
Add i.MX8QM audio related nodes and update eDMA[0,1]'s information.
Signed-off-by: Frank Li <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi | 473 +++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8qm.dtsi | 86 ++++
2 files changed, 559 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi
new file mode 100644
index 0000000000000..ed5a1b4af1d76
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi
@@ -0,0 +1,473 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2024 NXP
+ * Dong Aisheng <[email protected]>
+ */
+
+/delete-node/ &acm;
+/delete-node/ &sai4;
+/delete-node/ &sai5;
+/delete-node/ &sai4_lpcg;
+/delete-node/ &sai5_lpcg;
+
+/* edma2 called in imx8qm RM with the same address in edma0 of imx8qxp */
+&edma0{
+ reg = <0x591f0000 0x150000>;
+ dma-channels = <20>;
+ dma-channel-mask = <0>;
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, /* asrc0 */
+ <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>, /* esai0 */
+ <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>, /* spdif0 */
+ <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>, /* spdif1 */
+ <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, /* sai0 */
+ <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, /* sai1 */
+ <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, /* sai2 */
+ <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, /* sai3 */
+ <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, /* sai4 */
+ <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>; /* sai5 */
+ power-domains = <&pd IMX_SC_R_DMA_2_CH0>,
+ <&pd IMX_SC_R_DMA_2_CH1>,
+ <&pd IMX_SC_R_DMA_2_CH2>,
+ <&pd IMX_SC_R_DMA_2_CH3>,
+ <&pd IMX_SC_R_DMA_2_CH4>,
+ <&pd IMX_SC_R_DMA_2_CH5>,
+ <&pd IMX_SC_R_DMA_2_CH6>,
+ <&pd IMX_SC_R_DMA_2_CH7>,
+ <&pd IMX_SC_R_DMA_2_CH8>,
+ <&pd IMX_SC_R_DMA_2_CH9>,
+ <&pd IMX_SC_R_DMA_2_CH10>,
+ <&pd IMX_SC_R_DMA_2_CH11>,
+ <&pd IMX_SC_R_DMA_2_CH12>,
+ <&pd IMX_SC_R_DMA_2_CH13>,
+ <&pd IMX_SC_R_DMA_2_CH14>,
+ <&pd IMX_SC_R_DMA_2_CH15>,
+ <&pd IMX_SC_R_DMA_2_CH16>,
+ <&pd IMX_SC_R_DMA_2_CH17>,
+ <&pd IMX_SC_R_DMA_2_CH18>,
+ <&pd IMX_SC_R_DMA_2_CH19>;
+};
+
+/* edma3 called in imx8qm RM with the same address in edma1 of imx8qxp */
+&edma1{
+ reg = <0x599F0000 0xc0000>;
+ dma-channels = <11>;
+ dma-channel-mask = <0xc0>;
+ interrupts = <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>, /* asrc1 */
+ <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* no used */
+ <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, /* no used */
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* sai6 */
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>; /* sai7 */
+ power-domains = <&pd IMX_SC_R_DMA_3_CH0>,
+ <&pd IMX_SC_R_DMA_3_CH1>,
+ <&pd IMX_SC_R_DMA_3_CH2>,
+ <&pd IMX_SC_R_DMA_3_CH3>,
+ <&pd IMX_SC_R_DMA_3_CH4>,
+ <&pd IMX_SC_R_DMA_3_CH5>,
+ <&pd IMX_SC_R_DMA_3_CH6>,
+ <&pd IMX_SC_R_DMA_3_CH7>,
+ <&pd IMX_SC_R_DMA_3_CH8>,
+ <&pd IMX_SC_R_DMA_3_CH9>,
+ <&pd IMX_SC_R_DMA_3_CH10>;
+};
+
+&asrc0 {
+ clocks = <&asrc0_lpcg IMX_LPCG_CLK_0>,
+ <&asrc0_lpcg IMX_LPCG_CLK_2>,
+ <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+ <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+ <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
+ <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ power-domains = <&pd IMX_SC_R_ASRC_0>;
+};
+
+&esai0 {
+ clocks = <&esai0_lpcg IMX_LPCG_CLK_0>,
+ <&esai0_lpcg IMX_LPCG_CLK_4>,
+ <&esai0_lpcg IMX_LPCG_CLK_0>,
+ <&clk_dummy>;
+ power-domains = <&pd IMX_SC_R_ESAI_0>;
+};
+
+&spdif0 {
+ clocks = <&spdif0_lpcg IMX_LPCG_CLK_4>, /* core */
+ <&clk_dummy>, /* rxtx0 */
+ <&spdif0_lpcg IMX_LPCG_CLK_5>, /* rxtx1 */
+ <&clk_dummy>, /* rxtx2 */
+ <&clk_dummy>, /* rxtx3 */
+ <&clk_dummy>, /* rxtx4 */
+ <&audio_ipg_clk>, /* rxtx5 */
+ <&clk_dummy>, /* rxtx6 */
+ <&clk_dummy>, /* rxtx7 */
+ <&clk_dummy>; /* spba */
+ power-domains = <&pd IMX_SC_R_SPDIF_0>;
+};
+
+&sai0 {
+ clocks = <&sai0_lpcg IMX_LPCG_CLK_0>,
+ <&clk_dummy>,
+ <&sai0_lpcg IMX_LPCG_CLK_4>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ power-domains = <&pd IMX_SC_R_SAI_0>;
+};
+
+&sai1 {
+ clocks = <&sai1_lpcg IMX_LPCG_CLK_0>,
+ <&clk_dummy>,
+ <&sai1_lpcg IMX_LPCG_CLK_4>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ power-domains = <&pd IMX_SC_R_SAI_1>;
+};
+
+&sai2 {
+ clocks = <&sai2_lpcg IMX_LPCG_CLK_0>,
+ <&clk_dummy>,
+ <&sai2_lpcg IMX_LPCG_CLK_4>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ power-domains = <&pd IMX_SC_R_SAI_2>;
+};
+
+&sai3 {
+ clocks = <&sai3_lpcg IMX_LPCG_CLK_0>,
+ <&clk_dummy>,
+ <&sai3_lpcg IMX_LPCG_CLK_4>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ power-domains = <&pd IMX_SC_R_SAI_3>;
+};
+
+&asrc1 {
+ clocks = <&asrc1_lpcg IMX_LPCG_CLK_0>,
+ <&asrc1_lpcg IMX_LPCG_CLK_2>,
+ <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+ <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+ <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
+ <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ power-domains = <&pd IMX_SC_R_ASRC_1>;
+};
+
+&amix {
+ dais = <&sai6>, <&sai7>;
+};
+
+&asrc0_lpcg {
+ clocks = <&audio_ipg_clk>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_2>;
+ clock-output-names = "asrc0_lpcg_ipg_clk", "asrc0_lpcg_mem_clk";
+};
+
+&esai0_lpcg {
+ clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+ clock-output-names = "esai0_lpcg_extal_clk", "esai0_lpcg_ipg_clk";
+};
+
+&spdif0_lpcg {
+ clock-indices = <IMX_LPCG_CLK_5>, <IMX_LPCG_CLK_4>;
+ clock-output-names = "spdif0_lpcg_tx_clk", "spdif0_lpcg_gclkw";
+};
+
+&sai0_lpcg {
+ clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+ clock-output-names = "sai0_lpcg_mclk", "sai0_lpcg_ipg_clk";
+};
+
+&sai1_lpcg {
+ clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+ clock-output-names = "sai1_lpcg_mclk", "sai1_lpcg_ipg_clk";
+};
+
+&sai2_lpcg {
+ clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+ clock-output-names = "sai2_lpcg_mclk", "sai2_lpcg_ipg_clk";
+};
+
+&sai3_lpcg {
+ clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+ clock-output-names = "sai3_lpcg_mclk", "sai3_lpcg_ipg_clk";
+};
+
+&asrc1_lpcg {
+ clocks = <&audio_ipg_clk>, <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_2>;
+ clock-output-names = "asrc1_lpcg_ipg_clk", "asrc1_lpcg_mem_clk";
+};
+
+&mqs0_lpcg {
+ clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+ clock-output-names = "mqs0_lpcg_mclk", "mqs0_lpcg_ipg_clk";
+};
+
+&dsp_lpcg {
+ status = "disabled";
+};
+
+&dsp_ram_lpcg {
+ status = "disabled";
+};
+
+&audio_subsys {
+
+ acm: acm@59e00000 {
+ compatible = "fsl,imx8qm-acm";
+ reg = <0x59e00000 0x1D0000>;
+ #clock-cells = <1>;
+ power-domains = <&pd IMX_SC_R_AUDIO_CLK_0>,
+ <&pd IMX_SC_R_AUDIO_CLK_1>,
+ <&pd IMX_SC_R_MCLK_OUT_0>,
+ <&pd IMX_SC_R_MCLK_OUT_1>,
+ <&pd IMX_SC_R_AUDIO_PLL_0>,
+ <&pd IMX_SC_R_AUDIO_PLL_1>,
+ <&pd IMX_SC_R_ASRC_0>,
+ <&pd IMX_SC_R_ASRC_1>,
+ <&pd IMX_SC_R_ESAI_0>,
+ <&pd IMX_SC_R_ESAI_1>,
+ <&pd IMX_SC_R_SAI_0>,
+ <&pd IMX_SC_R_SAI_1>,
+ <&pd IMX_SC_R_SAI_2>,
+ <&pd IMX_SC_R_SAI_3>,
+ <&pd IMX_SC_R_SAI_4>,
+ <&pd IMX_SC_R_SAI_5>,
+ <&pd IMX_SC_R_SAI_6>,
+ <&pd IMX_SC_R_SAI_7>,
+ <&pd IMX_SC_R_SPDIF_0>,
+ <&pd IMX_SC_R_SPDIF_1>,
+ <&pd IMX_SC_R_MQS_0>;
+ clocks = <&aud_rec0_lpcg IMX_LPCG_CLK_0>,
+ <&aud_rec1_lpcg IMX_LPCG_CLK_0>,
+ <&aud_pll_div0_lpcg IMX_LPCG_CLK_0>,
+ <&aud_pll_div1_lpcg IMX_LPCG_CLK_0>,
+ <&clk_mlb_clk>,
+ <&clk_hdmi_rx_mclk>,
+ <&clk_ext_aud_mclk0>,
+ <&clk_ext_aud_mclk1>,
+ <&clk_esai0_rx_clk>,
+ <&clk_esai0_rx_hf_clk>,
+ <&clk_esai0_tx_clk>,
+ <&clk_esai0_tx_hf_clk>,
+ <&clk_esai1_rx_clk>,
+ <&clk_esai1_rx_hf_clk>,
+ <&clk_esai1_tx_clk>,
+ <&clk_esai1_tx_hf_clk>,
+ <&clk_spdif0_rx>,
+ <&clk_spdif0_rx>,
+ <&clk_sai0_rx_bclk>,
+ <&clk_sai0_tx_bclk>,
+ <&clk_sai1_rx_bclk>,
+ <&clk_sai1_tx_bclk>,
+ <&clk_sai2_rx_bclk>,
+ <&clk_sai3_rx_bclk>,
+ <&clk_sai4_rx_bclk>,
+ <&clk_sai5_rx_bclk>,
+ <&clk_sai6_rx_bclk>;
+ clock-names = "aud_rec_clk0_lpcg_clk",
+ "aud_rec_clk1_lpcg_clk",
+ "aud_pll_div_clk0_lpcg_clk",
+ "aud_pll_div_clk1_lpcg_clk",
+ "mlb_clk",
+ "hdmi_rx_mclk",
+ "ext_aud_mclk0",
+ "ext_aud_mclk1",
+ "esai0_rx_clk",
+ "esai0_rx_hf_clk",
+ "esai0_tx_clk",
+ "esai0_tx_hf_clk",
+ "esai1_rx_clk",
+ "esai1_rx_hf_clk",
+ "esai1_tx_clk",
+ "esai1_tx_hf_clk",
+ "spdif0_rx",
+ "spdif1_rx",
+ "sai0_rx_bclk",
+ "sai0_tx_bclk",
+ "sai1_rx_bclk",
+ "sai1_tx_bclk",
+ "sai2_rx_bclk",
+ "sai3_rx_bclk",
+ "sai4_rx_bclk",
+ "sai5_tx_bclk",
+ "sai6_rx_bclk";
+ };
+
+ sai4: sai@59080000 {
+ compatible = "fsl,imx8qm-sai";
+ reg = <0x59080000 0x10000>;
+ interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sai4_lpcg IMX_LPCG_CLK_0>,
+ <&clk_dummy>,
+ <&sai4_lpcg IMX_LPCG_CLK_4>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dma-names = "rx";
+ dmas = <&edma0 18 0 1>;
+ fsl,dataline = <0 0xf 0x0>;
+ power-domains = <&pd IMX_SC_R_SAI_4>;
+ status = "disabled";
+ };
+
+ sai5: sai@59090000 {
+ compatible = "fsl,imx8qm-sai";
+ reg = <0x59090000 0x10000>;
+ interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sai5_lpcg IMX_LPCG_CLK_0>,
+ <&clk_dummy>,
+ <&sai5_lpcg IMX_LPCG_CLK_4>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx";
+ dmas = <&edma0 19 0 0>;
+ fsl,dataline = <0 0x0 0xf>;
+ power-domains = <&pd IMX_SC_R_SAI_5>;
+ status = "disabled";
+ };
+
+ esai1: esai@59810000 {
+ compatible = "fsl,imx8qm-esai";
+ reg = <0x59810000 0x10000>;
+ interrupts = <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&esai1_lpcg IMX_LPCG_CLK_0>,
+ <&esai1_lpcg IMX_LPCG_CLK_4>,
+ <&esai1_lpcg IMX_LPCG_CLK_0>,
+ <&clk_dummy>;
+ clock-names = "core", "extal", "fsys", "spba";
+ dmas = <&edma1 6 0 1>, <&edma1 7 0 0>;
+ dma-names = "rx", "tx";
+ power-domains = <&pd IMX_SC_R_ESAI_1>;
+ status = "disabled";
+ };
+
+ sai6: sai@59820000 {
+ compatible = "fsl,imx8qm-sai";
+ reg = <0x59820000 0x10000>;
+ interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sai6_lpcg IMX_LPCG_CLK_0>,
+ <&clk_dummy>,
+ <&sai6_lpcg IMX_LPCG_CLK_4>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dma-names = "rx", "tx";
+ dmas = <&edma1 8 0 1>, <&edma1 9 0 0>;
+ power-domains = <&pd IMX_SC_R_SAI_6>;
+ status = "disabled";
+ };
+
+ sai7: sai@59830000 {
+ compatible = "fsl,imx8qm-sai";
+ reg = <0x59830000 0x10000>;
+ interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sai7_lpcg IMX_LPCG_CLK_0>,
+ <&clk_dummy>,
+ <&sai7_lpcg IMX_LPCG_CLK_4>,
+ <&clk_dummy>,
+ <&clk_dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dma-names = "tx";
+ dmas = <&edma1 10 0 0>;
+ power-domains = <&pd IMX_SC_R_SAI_7>;
+ status = "disabled";
+ };
+
+ sai4_lpcg: clock-controller@59480000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59480000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&acm IMX_ADMA_ACM_SAI4_MCLK_SEL>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+ clock-output-names = "sai4_lpcg_mclk", "sai4_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_SAI_4>;
+ status = "disabled";
+ };
+
+ sai5_lpcg: clock-controller@59490000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59490000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&acm IMX_ADMA_ACM_SAI5_MCLK_SEL>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+ clock-output-names = "sai5_lpcg_mclk", "sai5_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_SAI_5>;
+ status = "disabled";
+ };
+
+ esai1_lpcg: clock-controller@59c10000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59c10000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&acm IMX_ADMA_ACM_ESAI1_MCLK_SEL>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+ clock-output-names = "esai1_lpcg_extal_clk", "esai1_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_ESAI_1>;
+ };
+
+ sai6_lpcg: clock-controller@59c20000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59c20000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&acm IMX_ADMA_ACM_SAI6_MCLK_SEL>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+ clock-output-names = "sai6_lpcg_mclk", "sai6_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_SAI_6>;
+ };
+
+ sai7_lpcg: clock-controller@59c30000 {
+ compatible = "fsl,imx8qxp-lpcg";
+ reg = <0x59c30000 0x10000>;
+ #clock-cells = <1>;
+ clocks = <&acm IMX_ADMA_ACM_SAI7_MCLK_SEL>,
+ <&audio_ipg_clk>;
+ clock-indices = <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_0>;
+ clock-output-names = "sai7_lpcg_mclk", "sai7_lpcg_ipg_clk";
+ power-domains = <&pd IMX_SC_R_SAI_7>;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index b3d01677b70c4..da49d4bad32ee 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -461,7 +461,92 @@ drc_crit0: trip1 {
};
};
+ clk_dummy: clock-dummy {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "clk_dummy";
+ };
+
+ clk_mlb_clk: clock-mlb-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "mlb_clk";
+ };
+
+ clk_esai1_rx_clk: clock-esai1-rx {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "esai1_rx_clk";
+ };
+
+ clk_esai1_rx_hf_clk: clock-esai1-rx-hf {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "esai1_rx_hf_clk";
+ };
+
+ clk_esai1_tx_clk: clock-esai1-tx {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "esai1_tx_clk";
+ };
+
+ clk_esai1_tx_hf_clk: clock-esai1-tx-hf {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "esai1_tx_hf_clk";
+ };
+
+ clk_spdif1_rx: clock-spdif1-rx {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "spdif1_rx";
+ };
+
+ clk_sai5_rx_bclk: clock-sai5-rx-bclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "sai5_rx_bclk";
+ };
+
+ clk_sai5_tx_bclk: clock-sai5-tx-bclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "sai5_tx_bclk";
+ };
+
+ clk_sai6_rx_bclk: clock-sai6-rx-bclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "sai6_rx_bclk";
+ };
+
+ clk_sai6_tx_bclk: clock-sai6-tx-bclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "sai6_tx_bclk";
+ };
+
+ clk_hdmi_rx_mclk: clock-hdmi-rx-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "hdmi-rx-mclk";
+ };
+
/* sorted in register address */
+ #include "imx8-ss-audio.dtsi"
#include "imx8-ss-vpu.dtsi"
#include "imx8-ss-img.dtsi"
#include "imx8-ss-dma.dtsi"
@@ -473,3 +558,4 @@ drc_crit0: trip1 {
#include "imx8qm-ss-dma.dtsi"
#include "imx8qm-ss-conn.dtsi"
#include "imx8qm-ss-lsio.dtsi"
+#include "imx8qm-ss-audio.dtsi"
--
2.34.1
Different boards have different DDR memory sizes and layouts for reserved
memory. This change reduces future dependencies to add 'imx8qm-ss-audio'.
Signed-off-by: Frank Li <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
index 897cbb7b67422..ff5df0fed9e96 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
@@ -447,7 +447,6 @@ dsp: dsp@596e8000 {
<&lsio_mu13 2 1>,
<&lsio_mu13 3 0>,
<&lsio_mu13 3 1>;
- memory-region = <&dsp_reserved>;
status = "disabled";
};
--
2.34.1
add ocotp ad fec_mac[0,1] for imx8qm.
Signed-off-by: Frank Li <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8qm.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index 96a940c6046d8..734bee4294dfe 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -333,6 +333,21 @@ rtc: rtc {
compatible = "fsl,imx8qxp-sc-rtc";
};
+ ocotp: ocotp {
+ compatible = "fsl,imx8qm-scu-ocotp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ read-only;
+
+ fec_mac0: mac@1c4 {
+ reg = <0x1c4 6>;
+ };
+
+ fec_mac1: mac@1c6 {
+ reg = <0x1c6 6>;
+ };
+ };
+
tsens: thermal-sensor {
compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
#thermal-sensor-cells = <1>;
--
2.34.1
Hello Frank,
On Mon, Apr 15, 2024 at 03:46:38PM -0400, Frank Li wrote:
> Add i.MX8QM audio related nodes and update eDMA[0,1]'s information.
>
> Signed-off-by: Frank Li <[email protected]>
> ---
> arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi | 473 +++++++++++++++++++++
> arch/arm64/boot/dts/freescale/imx8qm.dtsi | 86 ++++
> 2 files changed, 559 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi
> new file mode 100644
> index 0000000000000..ed5a1b4af1d76
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi
> @@ -0,0 +1,473 @@
> +// SPDX-License-Identifier: GPL-2.0+
OR MIT?
Normally for device tree files having both is preferred.
> +/*
> + * Copyright 2024 NXP
> + * Dong Aisheng <[email protected]>
> + */
> +
> +/delete-node/ &acm;
> +/delete-node/ &sai4;
> +/delete-node/ &sai5;
> +/delete-node/ &sai4_lpcg;
> +/delete-node/ &sai5_lpcg;
Can you explain these delete-node ? This is something that I would
expect when a dtsi is previously included, not in this case.
Francesco
On Mon, Apr 15, 2024 at 03:46:46PM -0400, Frank Li wrote:
> Add fec2 support.
>
> Signed-off-by: Frank Li <[email protected]>
> ---
> arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 40 ++++++++++++++++++++++++++++
> 1 file changed, 40 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> index da17161055179..84372c060e200 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> @@ -382,6 +391,19 @@ ethphy1: ethernet-phy@1 {
> };
> };
>
> +&fec2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec2>;
> + phy-mode = "rgmii-txid";
> + phy-handle = <ðphy1>;
> + phy-supply = <®_fec2_supply>;
> + fsl,magic-packet;
this is supposed to be just before status, as per DT style guidelines.
> + nvmem-cells = <&fec_mac1>;
> + nvmem-cell-names = "mac-address";
> + rx-internal-delay-ps = <2000>;
> + status = "okay";
> +};
Francesco
On Tue, Apr 16, 2024 at 08:50:26AM +0200, Francesco Dolcini wrote:
> Hello Frank,
>
> On Mon, Apr 15, 2024 at 03:46:38PM -0400, Frank Li wrote:
> > Add i.MX8QM audio related nodes and update eDMA[0,1]'s information.
> >
> > Signed-off-by: Frank Li <[email protected]>
> > ---
> > arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi | 473 +++++++++++++++++++++
> > arch/arm64/boot/dts/freescale/imx8qm.dtsi | 86 ++++
> > 2 files changed, 559 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi
> > new file mode 100644
> > index 0000000000000..ed5a1b4af1d76
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi
> > @@ -0,0 +1,473 @@
> > +// SPDX-License-Identifier: GPL-2.0+
>
> OR MIT?
All other qm related dtsi is only license GPLv2. If add Or MIT, it need
re-license whole include tree files, which out of scope of this patch. I
feel like to keep consistent with other files.
>
> Normally for device tree files having both is preferred.
>
> > +/*
> > + * Copyright 2024 NXP
> > + * Dong Aisheng <[email protected]>
> > + */
> > +
> > +/delete-node/ &acm;
> > +/delete-node/ &sai4;
> > +/delete-node/ &sai5;
> > +/delete-node/ &sai4_lpcg;
> > +/delete-node/ &sai5_lpcg;
>
> Can you explain these delete-node ? This is something that I would
> expect when a dtsi is previously included, not in this case.
We want to avoid some property inherent from parent dtsi file because it is
big difference with common one.
This node will be rewrite totally in this files.
>
> Francesco
>
Hello Frank,
On Wed, Apr 17, 2024 at 12:01:43PM -0400, Frank Li wrote:
> On Tue, Apr 16, 2024 at 08:50:26AM +0200, Francesco Dolcini wrote:
> > On Mon, Apr 15, 2024 at 03:46:38PM -0400, Frank Li wrote:
> > > Add i.MX8QM audio related nodes and update eDMA[0,1]'s information.
> > >
> > > Signed-off-by: Frank Li <[email protected]>
> > > ---
> > > arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi | 473 +++++++++++++++++++++
> > > arch/arm64/boot/dts/freescale/imx8qm.dtsi | 86 ++++
> > > 2 files changed, 559 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi
> > > new file mode 100644
> > > index 0000000000000..ed5a1b4af1d76
> > > --- /dev/null
> > > +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi
..
> > > +/delete-node/ &acm;
> > > +/delete-node/ &sai4;
> > > +/delete-node/ &sai5;
> > > +/delete-node/ &sai4_lpcg;
> > > +/delete-node/ &sai5_lpcg;
> >
> > Can you explain these delete-node ? This is something that I would
> > expect when a dtsi is previously included, not in this case.
>
> We want to avoid some property inherent from parent dtsi file because it is
> big difference with common one.
>
> This node will be rewrite totally in this files.
imx8qm-ss-audio.dtsi does not include any file. From where these
inherited properties are coming from? Which file is the "parent dtsi" ?
Thanks,
Francesco
On Wed, Apr 17, 2024 at 07:20:31PM +0200, Francesco Dolcini wrote:
> Hello Frank,
>
> On Wed, Apr 17, 2024 at 12:01:43PM -0400, Frank Li wrote:
> > On Tue, Apr 16, 2024 at 08:50:26AM +0200, Francesco Dolcini wrote:
> > > On Mon, Apr 15, 2024 at 03:46:38PM -0400, Frank Li wrote:
> > > > Add i.MX8QM audio related nodes and update eDMA[0,1]'s information.
> > > >
> > > > Signed-off-by: Frank Li <[email protected]>
> > > > ---
> > > > arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi | 473 +++++++++++++++++++++
> > > > arch/arm64/boot/dts/freescale/imx8qm.dtsi | 86 ++++
> > > > 2 files changed, 559 insertions(+)
> > > >
> > > > diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi
> > > > new file mode 100644
> > > > index 0000000000000..ed5a1b4af1d76
> > > > --- /dev/null
> > > > +++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-audio.dtsi
>
> ...
>
> > > > +/delete-node/ &acm;
> > > > +/delete-node/ &sai4;
> > > > +/delete-node/ &sai5;
> > > > +/delete-node/ &sai4_lpcg;
> > > > +/delete-node/ &sai5_lpcg;
> > >
> > > Can you explain these delete-node ? This is something that I would
> > > expect when a dtsi is previously included, not in this case.
> >
> > We want to avoid some property inherent from parent dtsi file because it is
> > big difference with common one.
> >
> > This node will be rewrite totally in this files.
>
> imx8qm-ss-audio.dtsi does not include any file. From where these
> inherited properties are coming from? Which file is the "parent dtsi" ?
imx8qm-ss-audio.dtsi are not supposed to be included directly. imx8qm.dtsi
is supposed to be included by other board dts file.
in imx8qm.dtsi
/* sorted in register address */
+ #include "imx8-ss-audio.dtsi"
#include "imx8-ss-vpu.dtsi"
#include "imx8-ss-img.dtsi"
#include "imx8-ss-dma.dtsi"
@@ -473,3 +558,4 @@ drc_crit0: trip1 {
#include "imx8qm-ss-dma.dtsi"
#include "imx8qm-ss-conn.dtsi"
#include "imx8qm-ss-lsio.dtsi"
+#include "imx8qm-ss-audio.dtsi"
"imx8qm-ss-audio" will overwrite some common audio node in
"imx8-ss-audio.dtsi"
acm, and sai4/5 are defined in imx8-ss-audio.dtsi for common part for all
imx8qm\imx8qxp\imx8dxl.
Frank
>
> Thanks,
> Francesco
>