Move VMware hypercall macros to vmware.h. This is a prerequisite for
the introduction of vmware_hypercall API. No functional changes besides
exporting vmware_hypercall_mode symbol.
Signed-off-by: Alexey Makhalov <[email protected]>
Reviewed-by: Nadav Amit <[email protected]>
---
arch/x86/include/asm/vmware.h | 72 +++++++++++++++++++++++++++++------
arch/x86/kernel/cpu/vmware.c | 43 +--------------------
2 files changed, 62 insertions(+), 53 deletions(-)
diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index ac9fc51e2b18..de2533337611 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -8,25 +8,34 @@
/*
* The hypercall definitions differ in the low word of the %edx argument
- * in the following way: the old port base interface uses the port
- * number to distinguish between high- and low bandwidth versions.
+ * in the following way: the old I/O port based interface uses the port
+ * number to distinguish between high- and low bandwidth versions, and
+ * uses IN/OUT instructions to define transfer direction.
*
* The new vmcall interface instead uses a set of flags to select
* bandwidth mode and transfer direction. The flags should be loaded
* into %dx by any user and are automatically replaced by the port
- * number if the VMWARE_HYPERVISOR_PORT method is used.
- *
- * In short, new driver code should strictly use the new definition of
- * %dx content.
+ * number if the I/O port method is used.
*/
-/* Old port-based version */
-#define VMWARE_HYPERVISOR_PORT 0x5658
-#define VMWARE_HYPERVISOR_PORT_HB 0x5659
+#define VMWARE_HYPERVISOR_HB BIT(0)
+#define VMWARE_HYPERVISOR_OUT BIT(1)
+
+#define VMWARE_HYPERVISOR_PORT 0x5658
+#define VMWARE_HYPERVISOR_PORT_HB (VMWARE_HYPERVISOR_PORT | \
+ VMWARE_HYPERVISOR_HB)
+
+#define VMWARE_HYPERVISOR_MAGIC 0x564d5868U
+
+#define VMWARE_CMD_GETVERSION 10
+#define VMWARE_CMD_GETHZ 45
+#define VMWARE_CMD_GETVCPU_INFO 68
+#define VMWARE_CMD_STEALCLOCK 91
+
+#define CPUID_VMWARE_FEATURES_ECX_VMMCALL BIT(0)
+#define CPUID_VMWARE_FEATURES_ECX_VMCALL BIT(1)
-/* Current vmcall / vmmcall version */
-#define VMWARE_HYPERVISOR_HB BIT(0)
-#define VMWARE_HYPERVISOR_OUT BIT(1)
+extern u8 vmware_hypercall_mode;
/* The low bandwidth call. The low word of edx is presumed clear. */
#define VMWARE_HYPERCALL \
@@ -54,4 +63,43 @@
"rep insb", \
"vmcall", X86_FEATURE_VMCALL, \
"vmmcall", X86_FEATURE_VMW_VMMCALL)
+
+#define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \
+ __asm__("inl (%%dx), %%eax" : \
+ "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
+ "a"(VMWARE_HYPERVISOR_MAGIC), \
+ "c"(VMWARE_CMD_##cmd), \
+ "d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) : \
+ "memory")
+
+#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx) \
+ __asm__("vmcall" : \
+ "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
+ "a"(VMWARE_HYPERVISOR_MAGIC), \
+ "c"(VMWARE_CMD_##cmd), \
+ "d"(0), "b"(UINT_MAX) : \
+ "memory")
+
+#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx) \
+ __asm__("vmmcall" : \
+ "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
+ "a"(VMWARE_HYPERVISOR_MAGIC), \
+ "c"(VMWARE_CMD_##cmd), \
+ "d"(0), "b"(UINT_MAX) : \
+ "memory")
+
+#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do { \
+ switch (vmware_hypercall_mode) { \
+ case CPUID_VMWARE_FEATURES_ECX_VMCALL: \
+ VMWARE_VMCALL(cmd, eax, ebx, ecx, edx); \
+ break; \
+ case CPUID_VMWARE_FEATURES_ECX_VMMCALL: \
+ VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx); \
+ break; \
+ default: \
+ VMWARE_PORT(cmd, eax, ebx, ecx, edx); \
+ break; \
+ } \
+ } while (0)
+
#endif
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index f58c8d669bd3..acd9658f7c4b 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -41,8 +41,6 @@
#define CPUID_VMWARE_INFO_LEAF 0x40000000
#define CPUID_VMWARE_FEATURES_LEAF 0x40000010
-#define CPUID_VMWARE_FEATURES_ECX_VMMCALL BIT(0)
-#define CPUID_VMWARE_FEATURES_ECX_VMCALL BIT(1)
#define VMWARE_HYPERVISOR_MAGIC 0x564D5868
@@ -58,44 +56,6 @@
#define STEALCLOCK_DISABLED 0
#define STEALCLOCK_ENABLED 1
-#define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \
- __asm__("inl (%%dx), %%eax" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do { \
- switch (vmware_hypercall_mode) { \
- case CPUID_VMWARE_FEATURES_ECX_VMCALL: \
- VMWARE_VMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- case CPUID_VMWARE_FEATURES_ECX_VMMCALL: \
- VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- default: \
- VMWARE_PORT(cmd, eax, ebx, ecx, edx); \
- break; \
- } \
- } while (0)
-
struct vmware_steal_time {
union {
uint64_t clock; /* stolen time counter in units of vtsc */
@@ -109,7 +69,8 @@ struct vmware_steal_time {
};
static unsigned long vmware_tsc_khz __ro_after_init;
-static u8 vmware_hypercall_mode __ro_after_init;
+u8 vmware_hypercall_mode __ro_after_init;
+EXPORT_SYMBOL_GPL(vmware_hypercall_mode);
static inline int __vmware_platform(void)
{
--
2.39.0
On Wed, Apr 24, 2024 at 04:14:07PM -0700, Alexey Makhalov wrote:
> +#define VMWARE_CMD_GETVERSION 10
> +#define VMWARE_CMD_GETHZ 45
> +#define VMWARE_CMD_GETVCPU_INFO 68
> +#define VMWARE_CMD_STEALCLOCK 91
Ok, what part in
"* first patch: sole code movement, no changes whatsoever"
wasn't clear?
You're adding those macros above to a patch which claims that it does
code movement only. Don't do that.
Let me try again:
* first patch: *ONLY* code movement. No new code, no new defines, no new
functions, no nada! Only move code and do fixups so that it still builds
like the export you're doing.
* follow-on patches: other changes.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
VMware hypercalls invocations were all spread out across the kernel
implementing same ABI as in-place asm-inline. With encrypted memory
and confidential computing it became harder to maintain every changes
in these hypercall implementations.
Intention of this patchset is to introduce arch independent VMware
hypercall API layer other subsystems such as device drivers can call
to, while hiding architecture specific implementation behind.
Second patch introduces the vmware_hypercall low and high bandwidth
families of functions, with little enhancements there.
Sixth patch adds tdx hypercall support
arm64 implementation of vmware_hypercalls is in drivers/gpu/drm/
vmwgfx/vmwgfx_msg_arm64.h and going to be moved to arch/arm64 with
a separate patchset with the introduction of VMware Linux guest
support for arm64.
No functional changes in drivers/input/mouse/vmmouse.c and
drivers/ptp/ptp_vmw.c
v8->v9 change:
First patch "x86/vmware: Move common macros to vmware.h" was split on 2 pieces:
"x86/vmware: Move common macros to vmware.h" - just code movement, and
"x86/vmware: Correct macro names" - macro renaming.
v7->v8 no functional changes. Updated authors and reviewers emails to
@broadcom.com
v6->v7 changes (only in patch 7):
- Addressed comments from H. Peter Anvin:
1. Removed vmware_tdx_hypercall_args(), moved args handling inside
vmware_tdx_hypercall().
2. Added pr_warn_once() for !hypervisor_is_type(X86_HYPER_VMWARE) case.
- Added ack by Dave Hansen.
v5->v6 change:
- Added ack by Kirill A. Shutemov in patch 7.
v4->v5 changes:
[patch 2]:
- Fixed the problem reported by Simon Horman where build fails after
patch 2 application. Do not undefine VMWARE_HYPERCALL for now, and
update vmwgfx, vmmouse and ptp_vmw code for new VMWARE_HYPERCALL macro.
- Introduce new patch 6 to undefine VMWARE_HYPERCALL, which is safe to do
after patches 3 to 5.
- [patch 7 (former patch 6)]: Add missing r15 (CPL) initialization.
v3->v4 changes: (no functional changes in patches 1-5)
[patch 2]:
- Added the comment with VMware hypercall ABI description.
[patch 6]:
- vmware_tdx_hypercall_args remove in6/out6 arguments as excessive.
- vmware_tdx_hypercall return ULONG_MAX on error to mimic bad hypercall
command error from the hypervisor.
- Replaced pr_warn by pr_warn_once as pointed by Kirill Shutemov.
- Fixed the warning reported by Intel's kernel test robot.
- Added the comment describing VMware TDX hypercall ABI.
v2->v3 changes: (no functional changes in patches 1-5)
- Improved commit message in patches 1, 2 and 5 as was suggested by
Borislav Petkov.
- To address Dave Hansen's concern, patch 6 was reorganized to avoid
exporting bare __tdx_hypercall and to make exported vmware_tdx_hypercall
VMWare guest specific.
v1->v2 changes (no functional changes):
- Improved commit message in patches 2 and 5.
- Added Reviewed-by for all patches.
- Added Ack from Dmitry Torokhov in patch 4. No fixes regarding reported
by Simon Horman gcc error in this patch.
Alexey Makhalov (8):
x86/vmware: Move common macros to vmware.h
x86/vmware: Correct macro names
x86/vmware: Introduce VMware hypercall API
ptp/vmware: Use VMware hypercall API
input/vmmouse: Use VMware hypercall API
drm/vmwgfx: Use VMware hypercall API
x86/vmware: Undefine VMWARE_HYPERCALL
x86/vmware: Add TDX hypercall support
arch/x86/include/asm/vmware.h | 331 +++++++++++++++++++---
arch/x86/kernel/cpu/vmware.c | 144 +++++-----
drivers/gpu/drm/vmwgfx/vmwgfx_msg.c | 173 ++++-------
drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h | 197 +++++++++----
drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h | 185 ------------
drivers/input/mouse/vmmouse.c | 76 ++---
drivers/ptp/ptp_vmw.c | 12 +-
7 files changed, 593 insertions(+), 525 deletions(-)
--
2.39.0
Move VMware hypercall macros to vmware.h. This is a prerequisite for
the introduction of vmware_hypercall API. No functional changes besides
exporting vmware_hypercall_mode symbol.
Signed-off-by: Alexey Makhalov <[email protected]>
Reviewed-by: Nadav Amit <[email protected]>
---
arch/x86/include/asm/vmware.h | 72 +++++++++++++++++++++++++++++------
arch/x86/kernel/cpu/vmware.c | 49 +-----------------------
2 files changed, 62 insertions(+), 59 deletions(-)
diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index ac9fc51e2b18..de2533337611 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -8,25 +8,34 @@
/*
* The hypercall definitions differ in the low word of the %edx argument
- * in the following way: the old port base interface uses the port
- * number to distinguish between high- and low bandwidth versions.
+ * in the following way: the old I/O port based interface uses the port
+ * number to distinguish between high- and low bandwidth versions, and
+ * uses IN/OUT instructions to define transfer direction.
*
* The new vmcall interface instead uses a set of flags to select
* bandwidth mode and transfer direction. The flags should be loaded
* into %dx by any user and are automatically replaced by the port
- * number if the VMWARE_HYPERVISOR_PORT method is used.
- *
- * In short, new driver code should strictly use the new definition of
- * %dx content.
+ * number if the I/O port method is used.
*/
-/* Old port-based version */
-#define VMWARE_HYPERVISOR_PORT 0x5658
-#define VMWARE_HYPERVISOR_PORT_HB 0x5659
+#define VMWARE_HYPERVISOR_HB BIT(0)
+#define VMWARE_HYPERVISOR_OUT BIT(1)
+
+#define VMWARE_HYPERVISOR_PORT 0x5658
+#define VMWARE_HYPERVISOR_PORT_HB (VMWARE_HYPERVISOR_PORT | \
+ VMWARE_HYPERVISOR_HB)
+
+#define VMWARE_HYPERVISOR_MAGIC 0x564d5868U
+
+#define VMWARE_CMD_GETVERSION 10
+#define VMWARE_CMD_GETHZ 45
+#define VMWARE_CMD_GETVCPU_INFO 68
+#define VMWARE_CMD_STEALCLOCK 91
+
+#define CPUID_VMWARE_FEATURES_ECX_VMMCALL BIT(0)
+#define CPUID_VMWARE_FEATURES_ECX_VMCALL BIT(1)
-/* Current vmcall / vmmcall version */
-#define VMWARE_HYPERVISOR_HB BIT(0)
-#define VMWARE_HYPERVISOR_OUT BIT(1)
+extern u8 vmware_hypercall_mode;
/* The low bandwidth call. The low word of edx is presumed clear. */
#define VMWARE_HYPERCALL \
@@ -54,4 +63,43 @@
"rep insb", \
"vmcall", X86_FEATURE_VMCALL, \
"vmmcall", X86_FEATURE_VMW_VMMCALL)
+
+#define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \
+ __asm__("inl (%%dx), %%eax" : \
+ "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
+ "a"(VMWARE_HYPERVISOR_MAGIC), \
+ "c"(VMWARE_CMD_##cmd), \
+ "d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) : \
+ "memory")
+
+#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx) \
+ __asm__("vmcall" : \
+ "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
+ "a"(VMWARE_HYPERVISOR_MAGIC), \
+ "c"(VMWARE_CMD_##cmd), \
+ "d"(0), "b"(UINT_MAX) : \
+ "memory")
+
+#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx) \
+ __asm__("vmmcall" : \
+ "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
+ "a"(VMWARE_HYPERVISOR_MAGIC), \
+ "c"(VMWARE_CMD_##cmd), \
+ "d"(0), "b"(UINT_MAX) : \
+ "memory")
+
+#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do { \
+ switch (vmware_hypercall_mode) { \
+ case CPUID_VMWARE_FEATURES_ECX_VMCALL: \
+ VMWARE_VMCALL(cmd, eax, ebx, ecx, edx); \
+ break; \
+ case CPUID_VMWARE_FEATURES_ECX_VMMCALL: \
+ VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx); \
+ break; \
+ default: \
+ VMWARE_PORT(cmd, eax, ebx, ecx, edx); \
+ break; \
+ } \
+ } while (0)
+
#endif
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 11f83d07925e..68d812e12e52 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -41,60 +41,14 @@
#define CPUID_VMWARE_INFO_LEAF 0x40000000
#define CPUID_VMWARE_FEATURES_LEAF 0x40000010
-#define CPUID_VMWARE_FEATURES_ECX_VMMCALL BIT(0)
-#define CPUID_VMWARE_FEATURES_ECX_VMCALL BIT(1)
-#define VMWARE_HYPERVISOR_MAGIC 0x564D5868
-
-#define VMWARE_CMD_GETVERSION 10
-#define VMWARE_CMD_GETHZ 45
-#define VMWARE_CMD_GETVCPU_INFO 68
#define VMWARE_CMD_LEGACY_X2APIC 3
#define VMWARE_CMD_VCPU_RESERVED 31
-#define VMWARE_CMD_STEALCLOCK 91
#define STEALCLOCK_NOT_AVAILABLE (-1)
#define STEALCLOCK_DISABLED 0
#define STEALCLOCK_ENABLED 1
-#define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \
- __asm__("inl (%%dx), %%eax" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do { \
- switch (vmware_hypercall_mode) { \
- case CPUID_VMWARE_FEATURES_ECX_VMCALL: \
- VMWARE_VMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- case CPUID_VMWARE_FEATURES_ECX_VMMCALL: \
- VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- default: \
- VMWARE_PORT(cmd, eax, ebx, ecx, edx); \
- break; \
- } \
- } while (0)
-
struct vmware_steal_time {
union {
uint64_t clock; /* stolen time counter in units of vtsc */
@@ -108,7 +62,8 @@ struct vmware_steal_time {
};
static unsigned long vmware_tsc_khz __ro_after_init;
-static u8 vmware_hypercall_mode __ro_after_init;
+u8 vmware_hypercall_mode __ro_after_init;
+EXPORT_SYMBOL_GPL(vmware_hypercall_mode);
static inline int __vmware_platform(void)
{
--
2.39.0
No more direct use of VMWARE_HYPERCALL macro should be allowed.
Signed-off-by: Alexey Makhalov <[email protected]>
---
arch/x86/include/asm/vmware.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index 2ac87068184a..84a31f579a30 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -273,5 +273,6 @@ unsigned long vmware_hypercall_hb_in(unsigned long cmd, unsigned long in2,
}
#undef VMW_BP_REG
#undef VMW_BP_CONSTRAINT
+#undef VMWARE_HYPERCALL
#endif
--
2.39.0
Introduce vmware_hypercall family of functions. It is a common
implementation to be used by the VMware guest code and virtual
device drivers in architecture independent manner.
The API consists of vmware_hypercallX and vmware_hypercall_hb_{out,in}
set of functions by analogy with KVM hypercall API. Architecture
specific implementation is hidden inside.
It will simplify future enhancements in VMware hypercalls such
as SEV-ES and TDX related changes without needs to modify a
caller in device drivers code.
Current implementation extends an idea from commit bac7b4e84323
("x86/vmware: Update platform detection code for VMCALL/VMMCALL
hypercalls") to have a slow, but safe path in VMWARE_HYPERCALL
earlier during the boot when alternatives are not yet applied.
This logic was inherited from VMWARE_CMD from the commit mentioned
above. Default alternative code was optimized by size to reduce
excessive nop alignment once alternatives are applied. Total
default code size is 26 bytes, in worse case (3 bytes alternative)
remaining 23 bytes will be aligned by only 3 long NOP instructions.
Signed-off-by: Alexey Makhalov <[email protected]>
Reviewed-by: Nadav Amit <[email protected]>
Reviewed-by: Jeff Sipek <[email protected]>
---
arch/x86/include/asm/vmware.h | 288 +++++++++++++++++++-----
arch/x86/kernel/cpu/vmware.c | 35 ++-
drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h | 6 +-
drivers/input/mouse/vmmouse.c | 2 +
drivers/ptp/ptp_vmw.c | 2 +
5 files changed, 252 insertions(+), 81 deletions(-)
diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index de2533337611..2ac87068184a 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -7,14 +7,37 @@
#include <linux/stringify.h>
/*
- * The hypercall definitions differ in the low word of the %edx argument
+ * VMware hypercall ABI.
+ *
+ * - Low bandwidth (LB) hypercalls (I/O port based, vmcall and vmmcall)
+ * have up to 6 input and 6 output arguments passed and returned using
+ * registers: %eax (arg0), %ebx (arg1), %ecx (arg2), %edx (arg3),
+ * %esi (arg4), %edi (arg5).
+ * The following input arguments must be initialized by the caller:
+ * arg0 - VMWARE_HYPERVISOR_MAGIC
+ * arg2 - Hypercall command
+ * arg3 bits [15:0] - Port number, LB and direction flags
+ *
+ * - High bandwidth (HB) hypercalls are I/O port based only. They have
+ * up to 7 input and 7 output arguments passed and returned using
+ * registers: %eax (arg0), %ebx (arg1), %ecx (arg2), %edx (arg3),
+ * %esi (arg4), %edi (arg5), %ebp (arg6).
+ * The following input arguments must be initialized by the caller:
+ * arg0 - VMWARE_HYPERVISOR_MAGIC
+ * arg1 - Hypercall command
+ * arg3 bits [15:0] - Port number, HB and direction flags
+ *
+ * For compatibility purposes, x86_64 systems use only lower 32 bits
+ * for input and output arguments.
+ *
+ * The hypercall definitions differ in the low word of the %edx (arg3)
* in the following way: the old I/O port based interface uses the port
* number to distinguish between high- and low bandwidth versions, and
* uses IN/OUT instructions to define transfer direction.
*
* The new vmcall interface instead uses a set of flags to select
* bandwidth mode and transfer direction. The flags should be loaded
- * into %dx by any user and are automatically replaced by the port
+ * into arg3 by any user and are automatically replaced by the port
* number if the I/O port method is used.
*/
@@ -37,69 +60,218 @@
extern u8 vmware_hypercall_mode;
-/* The low bandwidth call. The low word of edx is presumed clear. */
-#define VMWARE_HYPERCALL \
- ALTERNATIVE_2("movw $" __stringify(VMWARE_HYPERVISOR_PORT) ", %%dx; " \
- "inl (%%dx), %%eax", \
- "vmcall", X86_FEATURE_VMCALL, \
- "vmmcall", X86_FEATURE_VMW_VMMCALL)
-
/*
- * The high bandwidth out call. The low word of edx is presumed to have the
- * HB and OUT bits set.
+ * The low bandwidth call. The low word of %edx is presumed to have OUT bit
+ * set. The high word of %edx may contain input data from the caller.
*/
-#define VMWARE_HYPERCALL_HB_OUT \
- ALTERNATIVE_2("movw $" __stringify(VMWARE_HYPERVISOR_PORT_HB) ", %%dx; " \
- "rep outsb", \
+#define VMWARE_HYPERCALL \
+ ALTERNATIVE_3("cmpb $" \
+ __stringify(CPUID_VMWARE_FEATURES_ECX_VMMCALL) \
+ ", %[mode]\n\t" \
+ "jg 2f\n\t" \
+ "je 1f\n\t" \
+ "movw %[port], %%dx\n\t" \
+ "inl (%%dx), %%eax\n\t" \
+ "jmp 3f\n\t" \
+ "1: vmmcall\n\t" \
+ "jmp 3f\n\t" \
+ "2: vmcall\n\t" \
+ "3:\n\t", \
+ "movw %[port], %%dx\n\t" \
+ "inl (%%dx), %%eax", X86_FEATURE_HYPERVISOR, \
"vmcall", X86_FEATURE_VMCALL, \
"vmmcall", X86_FEATURE_VMW_VMMCALL)
+static inline
+unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (0)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall3(unsigned long cmd, unsigned long in1,
+ uint32_t *out1, uint32_t *out2)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=b" (*out1), "=c" (*out2)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (0)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall4(unsigned long cmd, unsigned long in1,
+ uint32_t *out1, uint32_t *out2,
+ uint32_t *out3)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (0)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, uint32_t *out2)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=c" (*out2)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (in3),
+ "S" (in4),
+ "D" (in5)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
+ unsigned long in3, uint32_t *out2,
+ uint32_t *out3, uint32_t *out4,
+ uint32_t *out5)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=c" (*out2), "=d" (*out3), "=S" (*out4),
+ "=D" (*out5)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (in3)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, uint32_t *out1,
+ uint32_t *out2, uint32_t *out3)
+{
+ unsigned long out0;
+
+ asm_inline volatile (VMWARE_HYPERCALL
+ : "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
+ : [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
+ "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (in1),
+ "c" (cmd),
+ "d" (in3),
+ "S" (in4),
+ "D" (in5)
+ : "cc", "memory");
+ return out0;
+}
+
+
+#ifdef CONFIG_X86_64
+#define VMW_BP_REG "%%rbp"
+#define VMW_BP_CONSTRAINT "r"
+#else
+#define VMW_BP_REG "%%ebp"
+#define VMW_BP_CONSTRAINT "m"
+#endif
+
/*
- * The high bandwidth in call. The low word of edx is presumed to have the
- * HB bit set.
+ * High bandwidth calls are not supported on encrypted memory guests.
+ * The caller should check cc_platform_has(CC_ATTR_MEM_ENCRYPT) and use
+ * low bandwidth hypercall it memory encryption is set.
+ * This assumption simplifies HB hypercall impementation to just I/O port
+ * based approach without alternative patching.
*/
-#define VMWARE_HYPERCALL_HB_IN \
- ALTERNATIVE_2("movw $" __stringify(VMWARE_HYPERVISOR_PORT_HB) ", %%dx; " \
- "rep insb", \
- "vmcall", X86_FEATURE_VMCALL, \
- "vmmcall", X86_FEATURE_VMW_VMMCALL)
+static inline
+unsigned long vmware_hypercall_hb_out(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1)
+{
+ unsigned long out0;
+
+ asm_inline volatile (
+ UNWIND_HINT_SAVE
+ "push " VMW_BP_REG "\n\t"
+ UNWIND_HINT_UNDEFINED
+ "mov %[in6], " VMW_BP_REG "\n\t"
+ "rep outsb\n\t"
+ "pop " VMW_BP_REG "\n\t"
+ UNWIND_HINT_RESTORE
+ : "=a" (out0), "=b" (*out1)
+ : "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (cmd),
+ "c" (in2),
+ "d" (in3 | VMWARE_HYPERVISOR_PORT_HB),
+ "S" (in4),
+ "D" (in5),
+ [in6] VMW_BP_CONSTRAINT (in6)
+ : "cc", "memory");
+ return out0;
+}
+
+static inline
+unsigned long vmware_hypercall_hb_in(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1)
+{
+ unsigned long out0;
-#define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \
- __asm__("inl (%%dx), %%eax" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do { \
- switch (vmware_hypercall_mode) { \
- case CPUID_VMWARE_FEATURES_ECX_VMCALL: \
- VMWARE_VMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- case CPUID_VMWARE_FEATURES_ECX_VMMCALL: \
- VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- default: \
- VMWARE_PORT(cmd, eax, ebx, ecx, edx); \
- break; \
- } \
- } while (0)
+ asm_inline volatile (
+ UNWIND_HINT_SAVE
+ "push " VMW_BP_REG "\n\t"
+ UNWIND_HINT_UNDEFINED
+ "mov %[in6], " VMW_BP_REG "\n\t"
+ "rep insb\n\t"
+ "pop " VMW_BP_REG "\n\t"
+ UNWIND_HINT_RESTORE
+ : "=a" (out0), "=b" (*out1)
+ : "a" (VMWARE_HYPERVISOR_MAGIC),
+ "b" (cmd),
+ "c" (in2),
+ "d" (in3 | VMWARE_HYPERVISOR_PORT_HB),
+ "S" (in4),
+ "D" (in5),
+ [in6] VMW_BP_CONSTRAINT (in6)
+ : "cc", "memory");
+ return out0;
+}
+#undef VMW_BP_REG
+#undef VMW_BP_CONSTRAINT
#endif
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 9d804d60a11f..3ec14a5fa4ac 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -67,9 +67,10 @@ EXPORT_SYMBOL_GPL(vmware_hypercall_mode);
static inline int __vmware_platform(void)
{
- uint32_t eax, ebx, ecx, edx;
- VMWARE_CMD(GETVERSION, eax, ebx, ecx, edx);
- return eax != (uint32_t)-1 && ebx == VMWARE_HYPERVISOR_MAGIC;
+ uint32_t eax, ebx, ecx;
+
+ eax = vmware_hypercall3(VMWARE_CMD_GETVERSION, 0, &ebx, &ecx);
+ return eax != UINT_MAX && ebx == VMWARE_HYPERVISOR_MAGIC;
}
static unsigned long vmware_get_tsc_khz(void)
@@ -121,21 +122,12 @@ static void __init vmware_cyc2ns_setup(void)
pr_info("using clock offset of %llu ns\n", d->cyc2ns_offset);
}
-static int vmware_cmd_stealclock(uint32_t arg1, uint32_t arg2)
+static int vmware_cmd_stealclock(uint32_t addr_hi, uint32_t addr_lo)
{
- uint32_t result, info;
-
- asm volatile (VMWARE_HYPERCALL :
- "=a"(result),
- "=c"(info) :
- "a"(VMWARE_HYPERVISOR_MAGIC),
- "b"(0),
- "c"(VMWARE_CMD_STEALCLOCK),
- "d"(0),
- "S"(arg1),
- "D"(arg2) :
- "memory");
- return result;
+ uint32_t info;
+
+ return vmware_hypercall5(VMWARE_CMD_STEALCLOCK, 0, 0, addr_hi, addr_lo,
+ &info);
}
static bool stealclock_enable(phys_addr_t pa)
@@ -344,10 +336,10 @@ static void __init vmware_set_capabilities(void)
static void __init vmware_platform_setup(void)
{
- uint32_t eax, ebx, ecx, edx;
+ uint32_t eax, ebx, ecx;
uint64_t lpj, tsc_khz;
- VMWARE_CMD(GETHZ, eax, ebx, ecx, edx);
+ eax = vmware_hypercall3(VMWARE_CMD_GETHZ, UINT_MAX, &ebx, &ecx);
if (ebx != UINT_MAX) {
lpj = tsc_khz = eax | (((uint64_t)ebx) << 32);
@@ -429,8 +421,9 @@ static uint32_t __init vmware_platform(void)
/* Checks if hypervisor supports x2apic without VT-D interrupt remapping. */
static bool __init vmware_legacy_x2apic_available(void)
{
- uint32_t eax, ebx, ecx, edx;
- VMWARE_CMD(GETVCPU_INFO, eax, ebx, ecx, edx);
+ uint32_t eax;
+
+ eax = vmware_hypercall1(VMWARE_CMD_GETVCPU_INFO, 0);
return !(eax & GETVCPU_INFO_VCPU_RESERVED) &&
(eax & GETVCPU_INFO_LEGACY_X2APIC);
}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
index 23899d743a90..e040ee21ea1a 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
@@ -68,6 +68,8 @@
"=d"(edx), \
"=S"(si), \
"=D"(di) : \
+ [port] "i" (VMWARE_HYPERVISOR_PORT), \
+ [mode] "m" (vmware_hypercall_mode), \
"a"(magic), \
"b"(in_ebx), \
"c"(cmd), \
@@ -110,7 +112,7 @@
"push %%rbp;" \
UNWIND_HINT_UNDEFINED \
"mov %12, %%rbp;" \
- VMWARE_HYPERCALL_HB_OUT \
+ "rep outsb;" \
"pop %%rbp;" \
UNWIND_HINT_RESTORE : \
"=a"(eax), \
@@ -139,7 +141,7 @@
"push %%rbp;" \
UNWIND_HINT_UNDEFINED \
"mov %12, %%rbp;" \
- VMWARE_HYPERCALL_HB_IN \
+ "rep insb;" \
"pop %%rbp;" \
UNWIND_HINT_RESTORE : \
"=a"(eax), \
diff --git a/drivers/input/mouse/vmmouse.c b/drivers/input/mouse/vmmouse.c
index ea9eff7c8099..ad94c835ee66 100644
--- a/drivers/input/mouse/vmmouse.c
+++ b/drivers/input/mouse/vmmouse.c
@@ -91,6 +91,8 @@ struct vmmouse_data {
"=d"(out4), \
"=S"(__dummy1), \
"=D"(__dummy2) : \
+ [port] "i" (VMWARE_HYPERVISOR_PORT), \
+ [mode] "m" (vmware_hypercall_mode), \
"a"(VMMOUSE_PROTO_MAGIC), \
"b"(in1), \
"c"(VMMOUSE_PROTO_CMD_##cmd), \
diff --git a/drivers/ptp/ptp_vmw.c b/drivers/ptp/ptp_vmw.c
index 27c5547aa8a9..279d191d2df9 100644
--- a/drivers/ptp/ptp_vmw.c
+++ b/drivers/ptp/ptp_vmw.c
@@ -29,6 +29,8 @@ static int ptp_vmw_pclk_read(u64 *ns)
asm volatile (VMWARE_HYPERCALL :
"=a"(ret), "=b"(nsec_hi), "=c"(nsec_lo), "=d"(unused1),
"=S"(unused2), "=D"(unused3) :
+ [port] "i" (VMWARE_HYPERVISOR_PORT),
+ [mode] "m" (vmware_hypercall_mode),
"a"(VMWARE_MAGIC), "b"(0),
"c"(VMWARE_CMD_PCLK_GETTIME), "d"(0) :
"memory");
--
2.39.0
Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
Eliminate arch specific code. No functional changes intended.
Signed-off-by: Alexey Makhalov <[email protected]>
Reviewed-by: Nadav Amit <[email protected]>
Reviewed-by: Jeff Sipek <[email protected]>
---
drivers/ptp/ptp_vmw.c | 14 +++-----------
1 file changed, 3 insertions(+), 11 deletions(-)
diff --git a/drivers/ptp/ptp_vmw.c b/drivers/ptp/ptp_vmw.c
index 279d191d2df9..e5bb521b9b82 100644
--- a/drivers/ptp/ptp_vmw.c
+++ b/drivers/ptp/ptp_vmw.c
@@ -14,7 +14,6 @@
#include <asm/hypervisor.h>
#include <asm/vmware.h>
-#define VMWARE_MAGIC 0x564D5868
#define VMWARE_CMD_PCLK(nr) ((nr << 16) | 97)
#define VMWARE_CMD_PCLK_GETTIME VMWARE_CMD_PCLK(0)
@@ -24,17 +23,10 @@ static struct ptp_clock *ptp_vmw_clock;
static int ptp_vmw_pclk_read(u64 *ns)
{
- u32 ret, nsec_hi, nsec_lo, unused1, unused2, unused3;
-
- asm volatile (VMWARE_HYPERCALL :
- "=a"(ret), "=b"(nsec_hi), "=c"(nsec_lo), "=d"(unused1),
- "=S"(unused2), "=D"(unused3) :
- [port] "i" (VMWARE_HYPERVISOR_PORT),
- [mode] "m" (vmware_hypercall_mode),
- "a"(VMWARE_MAGIC), "b"(0),
- "c"(VMWARE_CMD_PCLK_GETTIME), "d"(0) :
- "memory");
+ u32 ret, nsec_hi, nsec_lo;
+ ret = vmware_hypercall3(VMWARE_CMD_PCLK_GETTIME, 0,
+ &nsec_hi, &nsec_lo);
if (ret == 0)
*ns = ((u64)nsec_hi << 32) | nsec_lo;
return ret;
--
2.39.0
Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
Eliminate arch specific code. No functional changes intended.
Signed-off-by: Alexey Makhalov <[email protected]>
Reviewed-by: Nadav Amit <[email protected]>
Reviewed-by: Zack Rusin <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
---
drivers/input/mouse/vmmouse.c | 78 ++++++++++-------------------------
1 file changed, 22 insertions(+), 56 deletions(-)
diff --git a/drivers/input/mouse/vmmouse.c b/drivers/input/mouse/vmmouse.c
index ad94c835ee66..fb1d986a6895 100644
--- a/drivers/input/mouse/vmmouse.c
+++ b/drivers/input/mouse/vmmouse.c
@@ -21,19 +21,16 @@
#include "psmouse.h"
#include "vmmouse.h"
-#define VMMOUSE_PROTO_MAGIC 0x564D5868U
-
/*
* Main commands supported by the vmmouse hypervisor port.
*/
-#define VMMOUSE_PROTO_CMD_GETVERSION 10
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_DATA 39
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_STATUS 40
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_COMMAND 41
-#define VMMOUSE_PROTO_CMD_ABSPOINTER_RESTRICT 86
+#define VMWARE_CMD_ABSPOINTER_DATA 39
+#define VMWARE_CMD_ABSPOINTER_STATUS 40
+#define VMWARE_CMD_ABSPOINTER_COMMAND 41
+#define VMWARE_CMD_ABSPOINTER_RESTRICT 86
/*
- * Subcommands for VMMOUSE_PROTO_CMD_ABSPOINTER_COMMAND
+ * Subcommands for VMWARE_CMD_ABSPOINTER_COMMAND
*/
#define VMMOUSE_CMD_ENABLE 0x45414552U
#define VMMOUSE_CMD_DISABLE 0x000000f5U
@@ -76,30 +73,6 @@ struct vmmouse_data {
char dev_name[128];
};
-/*
- * Hypervisor-specific bi-directional communication channel
- * implementing the vmmouse protocol. Should never execute on
- * bare metal hardware.
- */
-#define VMMOUSE_CMD(cmd, in1, out1, out2, out3, out4) \
-({ \
- unsigned long __dummy1, __dummy2; \
- __asm__ __volatile__ (VMWARE_HYPERCALL : \
- "=a"(out1), \
- "=b"(out2), \
- "=c"(out3), \
- "=d"(out4), \
- "=S"(__dummy1), \
- "=D"(__dummy2) : \
- [port] "i" (VMWARE_HYPERVISOR_PORT), \
- [mode] "m" (vmware_hypercall_mode), \
- "a"(VMMOUSE_PROTO_MAGIC), \
- "b"(in1), \
- "c"(VMMOUSE_PROTO_CMD_##cmd), \
- "d"(0) : \
- "memory"); \
-})
-
/**
* vmmouse_report_button - report button state on the correct input device
*
@@ -147,14 +120,12 @@ static psmouse_ret_t vmmouse_report_events(struct psmouse *psmouse)
struct input_dev *abs_dev = priv->abs_dev;
struct input_dev *pref_dev;
u32 status, x, y, z;
- u32 dummy1, dummy2, dummy3;
unsigned int queue_length;
unsigned int count = 255;
while (count--) {
/* See if we have motion data. */
- VMMOUSE_CMD(ABSPOINTER_STATUS, 0,
- status, dummy1, dummy2, dummy3);
+ status = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_STATUS, 0);
if ((status & VMMOUSE_ERROR) == VMMOUSE_ERROR) {
psmouse_err(psmouse, "failed to fetch status data\n");
/*
@@ -174,7 +145,8 @@ static psmouse_ret_t vmmouse_report_events(struct psmouse *psmouse)
}
/* Now get it */
- VMMOUSE_CMD(ABSPOINTER_DATA, 4, status, x, y, z);
+ status = vmware_hypercall4(VMWARE_CMD_ABSPOINTER_DATA, 4,
+ &x, &y, &z);
/*
* And report what we've got. Prefer to report button
@@ -249,14 +221,10 @@ static psmouse_ret_t vmmouse_process_byte(struct psmouse *psmouse)
static void vmmouse_disable(struct psmouse *psmouse)
{
u32 status;
- u32 dummy1, dummy2, dummy3, dummy4;
-
- VMMOUSE_CMD(ABSPOINTER_COMMAND, VMMOUSE_CMD_DISABLE,
- dummy1, dummy2, dummy3, dummy4);
- VMMOUSE_CMD(ABSPOINTER_STATUS, 0,
- status, dummy1, dummy2, dummy3);
+ vmware_hypercall1(VMWARE_CMD_ABSPOINTER_COMMAND, VMMOUSE_CMD_DISABLE);
+ status = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_STATUS, 0);
if ((status & VMMOUSE_ERROR) != VMMOUSE_ERROR)
psmouse_warn(psmouse, "failed to disable vmmouse device\n");
}
@@ -273,26 +241,24 @@ static void vmmouse_disable(struct psmouse *psmouse)
static int vmmouse_enable(struct psmouse *psmouse)
{
u32 status, version;
- u32 dummy1, dummy2, dummy3, dummy4;
/*
* Try enabling the device. If successful, we should be able to
* read valid version ID back from it.
*/
- VMMOUSE_CMD(ABSPOINTER_COMMAND, VMMOUSE_CMD_ENABLE,
- dummy1, dummy2, dummy3, dummy4);
+ vmware_hypercall1(VMWARE_CMD_ABSPOINTER_COMMAND, VMMOUSE_CMD_ENABLE);
/*
* See if version ID can be retrieved.
*/
- VMMOUSE_CMD(ABSPOINTER_STATUS, 0, status, dummy1, dummy2, dummy3);
+ status = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_STATUS, 0);
if ((status & 0x0000ffff) == 0) {
psmouse_dbg(psmouse, "empty flags - assuming no device\n");
return -ENXIO;
}
- VMMOUSE_CMD(ABSPOINTER_DATA, 1 /* single item */,
- version, dummy1, dummy2, dummy3);
+ version = vmware_hypercall1(VMWARE_CMD_ABSPOINTER_DATA,
+ 1 /* single item */);
if (version != VMMOUSE_VERSION_ID) {
psmouse_dbg(psmouse, "Unexpected version value: %u vs %u\n",
(unsigned) version, VMMOUSE_VERSION_ID);
@@ -303,11 +269,11 @@ static int vmmouse_enable(struct psmouse *psmouse)
/*
* Restrict ioport access, if possible.
*/
- VMMOUSE_CMD(ABSPOINTER_RESTRICT, VMMOUSE_RESTRICT_CPL0,
- dummy1, dummy2, dummy3, dummy4);
+ vmware_hypercall1(VMWARE_CMD_ABSPOINTER_RESTRICT,
+ VMMOUSE_RESTRICT_CPL0);
- VMMOUSE_CMD(ABSPOINTER_COMMAND, VMMOUSE_CMD_REQUEST_ABSOLUTE,
- dummy1, dummy2, dummy3, dummy4);
+ vmware_hypercall1(VMWARE_CMD_ABSPOINTER_COMMAND,
+ VMMOUSE_CMD_REQUEST_ABSOLUTE);
return 0;
}
@@ -344,7 +310,7 @@ static bool vmmouse_check_hypervisor(void)
*/
int vmmouse_detect(struct psmouse *psmouse, bool set_properties)
{
- u32 response, version, dummy1, dummy2;
+ u32 response, version, type;
if (!vmmouse_check_hypervisor()) {
psmouse_dbg(psmouse,
@@ -353,9 +319,9 @@ int vmmouse_detect(struct psmouse *psmouse, bool set_properties)
}
/* Check if the device is present */
- response = ~VMMOUSE_PROTO_MAGIC;
- VMMOUSE_CMD(GETVERSION, 0, version, response, dummy1, dummy2);
- if (response != VMMOUSE_PROTO_MAGIC || version == 0xffffffffU)
+ response = ~VMWARE_HYPERVISOR_MAGIC;
+ version = vmware_hypercall3(VMWARE_CMD_GETVERSION, 0, &response, &type);
+ if (response != VMWARE_HYPERVISOR_MAGIC || version == 0xffffffffU)
return -ENXIO;
if (set_properties) {
--
2.39.0
VCPU_RESERVED and LEGACY_X2APIC are not VMware hypercall commands.
These are bits in return value of VMWARE_CMD_GETVCPU_INFO command.
Change VMWARE_CMD_ prefix to GETVCPU_INFO_ one. And move bit-shift
operation to the macro body.
Signed-off-by: Alexey Makhalov <[email protected]>
---
arch/x86/kernel/cpu/vmware.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 68d812e12e52..9d804d60a11f 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -42,8 +42,8 @@
#define CPUID_VMWARE_INFO_LEAF 0x40000000
#define CPUID_VMWARE_FEATURES_LEAF 0x40000010
-#define VMWARE_CMD_LEGACY_X2APIC 3
-#define VMWARE_CMD_VCPU_RESERVED 31
+#define GETVCPU_INFO_LEGACY_X2APIC BIT(3)
+#define GETVCPU_INFO_VCPU_RESERVED BIT(31)
#define STEALCLOCK_NOT_AVAILABLE (-1)
#define STEALCLOCK_DISABLED 0
@@ -431,8 +431,8 @@ static bool __init vmware_legacy_x2apic_available(void)
{
uint32_t eax, ebx, ecx, edx;
VMWARE_CMD(GETVCPU_INFO, eax, ebx, ecx, edx);
- return !(eax & BIT(VMWARE_CMD_VCPU_RESERVED)) &&
- (eax & BIT(VMWARE_CMD_LEGACY_X2APIC));
+ return !(eax & GETVCPU_INFO_VCPU_RESERVED) &&
+ (eax & GETVCPU_INFO_LEGACY_X2APIC);
}
#ifdef CONFIG_AMD_MEM_ENCRYPT
--
2.39.0
VMware hypercalls use I/O port, VMCALL or VMMCALL instructions.
Add __tdx_hypercall path to support TDX guests.
No change in high bandwidth hypercalls, as only low bandwidth
ones are supported for TDX guests.
Co-developed-by: Tim Merrifield <[email protected]>
Signed-off-by: Tim Merrifield <[email protected]>
Signed-off-by: Alexey Makhalov <[email protected]>
Reviewed-by: Nadav Amit <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Acked-by: Dave Hansen <[email protected]>
---
arch/x86/include/asm/vmware.h | 46 +++++++++++++++++++++++++++++++
arch/x86/kernel/cpu/vmware.c | 52 +++++++++++++++++++++++++++++++++++
2 files changed, 98 insertions(+)
diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index 84a31f579a30..cc79c14d1ac2 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -18,6 +18,12 @@
* arg2 - Hypercall command
* arg3 bits [15:0] - Port number, LB and direction flags
*
+ * - Low bandwidth TDX hypercalls (x86_64 only) are similar to LB
+ * hypercalls. They also have up to 6 input and 6 output on registers
+ * arguments, with different argument to register mapping:
+ * %r12 (arg0), %rbx (arg1), %r13 (arg2), %rdx (arg3),
+ * %rsi (arg4), %rdi (arg5).
+ *
* - High bandwidth (HB) hypercalls are I/O port based only. They have
* up to 7 input and 7 output arguments passed and returned using
* registers: %eax (arg0), %ebx (arg1), %ecx (arg2), %edx (arg3),
@@ -54,12 +60,28 @@
#define VMWARE_CMD_GETHZ 45
#define VMWARE_CMD_GETVCPU_INFO 68
#define VMWARE_CMD_STEALCLOCK 91
+/*
+ * Hypercall command mask:
+ * bits [6:0] command, range [0, 127]
+ * bits [19:16] sub-command, range [0, 15]
+ */
+#define VMWARE_CMD_MASK 0xf007fU
#define CPUID_VMWARE_FEATURES_ECX_VMMCALL BIT(0)
#define CPUID_VMWARE_FEATURES_ECX_VMCALL BIT(1)
extern u8 vmware_hypercall_mode;
+#define VMWARE_TDX_VENDOR_LEAF 0x1af7e4909ULL
+#define VMWARE_TDX_HCALL_FUNC 1
+
+extern unsigned long vmware_tdx_hypercall(unsigned long cmd,
+ unsigned long in1, unsigned long in3,
+ unsigned long in4, unsigned long in5,
+ uint32_t *out1, uint32_t *out2,
+ uint32_t *out3, uint32_t *out4,
+ uint32_t *out5);
+
/*
* The low bandwidth call. The low word of %edx is presumed to have OUT bit
* set. The high word of %edx may contain input data from the caller.
@@ -87,6 +109,10 @@ unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, 0, 0, 0,
+ NULL, NULL, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -105,6 +131,10 @@ unsigned long vmware_hypercall3(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, 0, 0, 0,
+ out1, out2, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=b" (*out1), "=c" (*out2)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -124,6 +154,10 @@ unsigned long vmware_hypercall4(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, 0, 0, 0,
+ out1, out2, out3, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -143,6 +177,10 @@ unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, in3, in4, in5,
+ NULL, out2, NULL, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=c" (*out2)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
@@ -165,6 +203,10 @@ unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, in3, 0, 0,
+ NULL, out2, out3, out4, out5);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=c" (*out2), "=d" (*out3), "=S" (*out4),
"=D" (*out5)
@@ -186,6 +228,10 @@ unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
{
unsigned long out0;
+ if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return vmware_tdx_hypercall(cmd, in1, in3, in4, in5,
+ out1, out2, out3, NULL, NULL);
+
asm_inline volatile (VMWARE_HYPERCALL
: "=a" (out0), "=b" (*out1), "=c" (*out2), "=d" (*out3)
: [port] "i" (VMWARE_HYPERVISOR_PORT),
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 3ec14a5fa4ac..7511ef706d48 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -428,6 +428,58 @@ static bool __init vmware_legacy_x2apic_available(void)
(eax & GETVCPU_INFO_LEGACY_X2APIC);
}
+#ifdef CONFIG_INTEL_TDX_GUEST
+/*
+ * TDCALL[TDG.VP.VMCALL] uses %rax (arg0) and %rcx (arg2). Therefore,
+ * we remap those registers to %r12 and %r13, respectively.
+ */
+unsigned long vmware_tdx_hypercall(unsigned long cmd,
+ unsigned long in1, unsigned long in3,
+ unsigned long in4, unsigned long in5,
+ uint32_t *out1, uint32_t *out2,
+ uint32_t *out3, uint32_t *out4,
+ uint32_t *out5)
+{
+ struct tdx_module_args args;
+
+ if (!hypervisor_is_type(X86_HYPER_VMWARE)) {
+ pr_warn_once("Incorrect usage\n");
+ return ULONG_MAX;
+ }
+
+ if (cmd & ~VMWARE_CMD_MASK) {
+ pr_warn_once("Out of range command %lx\n", cmd);
+ return ULONG_MAX;
+ }
+
+ args.rbx = in1;
+ args.rdx = in3;
+ args.rsi = in4;
+ args.rdi = in5;
+ args.r10 = VMWARE_TDX_VENDOR_LEAF;
+ args.r11 = VMWARE_TDX_HCALL_FUNC;
+ args.r12 = VMWARE_HYPERVISOR_MAGIC;
+ args.r13 = cmd;
+ args.r15 = 0; /* CPL */
+
+ __tdx_hypercall(&args);
+
+ if (out1)
+ *out1 = args.rbx;
+ if (out2)
+ *out2 = args.r13;
+ if (out3)
+ *out3 = args.rdx;
+ if (out4)
+ *out4 = args.rsi;
+ if (out5)
+ *out5 = args.rdi;
+
+ return args.r12;
+}
+EXPORT_SYMBOL_GPL(vmware_tdx_hypercall);
+#endif
+
#ifdef CONFIG_AMD_MEM_ENCRYPT
static void vmware_sev_es_hcall_prepare(struct ghcb *ghcb,
struct pt_regs *regs)
--
2.39.0
Switch from VMWARE_HYPERCALL macro to vmware_hypercall API.
Eliminate arch specific code.
drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h: implement arm64 variant
of vmware_hypercall. And keep it here until introduction of ARM64
VMWare hypervisor interface.
Signed-off-by: Alexey Makhalov <[email protected]>
Reviewed-by: Nadav Amit <[email protected]>
Reviewed-by: Zack Rusin <[email protected]>
---
drivers/gpu/drm/vmwgfx/vmwgfx_msg.c | 173 +++++++------------
drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h | 197 +++++++++++++++-------
drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h | 187 --------------------
3 files changed, 197 insertions(+), 360 deletions(-)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c b/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
index 2651fe0ef518..1f15990d3934 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg.c
@@ -48,8 +48,6 @@
#define RETRIES 3
-#define VMW_HYPERVISOR_MAGIC 0x564D5868
-
#define VMW_PORT_CMD_MSG 30
#define VMW_PORT_CMD_HB_MSG 0
#define VMW_PORT_CMD_OPEN_CHANNEL (MSG_TYPE_OPEN << 16 | VMW_PORT_CMD_MSG)
@@ -104,20 +102,18 @@ static const char* const mksstat_kern_name_desc[MKSSTAT_KERN_COUNT][2] =
*/
static int vmw_open_channel(struct rpc_channel *channel, unsigned int protocol)
{
- unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
+ u32 ecx, edx, esi, edi;
- VMW_PORT(VMW_PORT_CMD_OPEN_CHANNEL,
- (protocol | GUESTMSG_FLAG_COOKIE), si, di,
- 0,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall6(VMW_PORT_CMD_OPEN_CHANNEL,
+ (protocol | GUESTMSG_FLAG_COOKIE), 0,
+ &ecx, &edx, &esi, &edi);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0)
return -EINVAL;
channel->channel_id = HIGH_WORD(edx);
- channel->cookie_high = si;
- channel->cookie_low = di;
+ channel->cookie_high = esi;
+ channel->cookie_low = edi;
return 0;
}
@@ -133,17 +129,13 @@ static int vmw_open_channel(struct rpc_channel *channel, unsigned int protocol)
*/
static int vmw_close_channel(struct rpc_channel *channel)
{
- unsigned long eax, ebx, ecx, edx, si, di;
-
- /* Set up additional parameters */
- si = channel->cookie_high;
- di = channel->cookie_low;
+ u32 ecx;
- VMW_PORT(VMW_PORT_CMD_CLOSE_CHANNEL,
- 0, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall5(VMW_PORT_CMD_CLOSE_CHANNEL,
+ 0, channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ecx);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0)
return -EINVAL;
@@ -163,24 +155,18 @@ static int vmw_close_channel(struct rpc_channel *channel)
static unsigned long vmw_port_hb_out(struct rpc_channel *channel,
const char *msg, bool hb)
{
- unsigned long si, di, eax, ebx, ecx, edx;
+ u32 ebx, ecx;
unsigned long msg_len = strlen(msg);
/* HB port can't access encrypted memory. */
if (hb && !cc_platform_has(CC_ATTR_MEM_ENCRYPT)) {
- unsigned long bp = channel->cookie_high;
- u32 channel_id = (channel->channel_id << 16);
-
- si = (uintptr_t) msg;
- di = channel->cookie_low;
-
- VMW_PORT_HB_OUT(
+ vmware_hypercall_hb_out(
(MESSAGE_STATUS_SUCCESS << 16) | VMW_PORT_CMD_HB_MSG,
- msg_len, si, di,
- VMWARE_HYPERVISOR_HB | channel_id |
- VMWARE_HYPERVISOR_OUT,
- VMW_HYPERVISOR_MAGIC, bp,
- eax, ebx, ecx, edx, si, di);
+ msg_len,
+ channel->channel_id << 16,
+ (uintptr_t) msg, channel->cookie_low,
+ channel->cookie_high,
+ &ebx);
return ebx;
}
@@ -194,14 +180,13 @@ static unsigned long vmw_port_hb_out(struct rpc_channel *channel,
memcpy(&word, msg, bytes);
msg_len -= bytes;
msg += bytes;
- si = channel->cookie_high;
- di = channel->cookie_low;
-
- VMW_PORT(VMW_PORT_CMD_MSG | (MSG_TYPE_SENDPAYLOAD << 16),
- word, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+
+ vmware_hypercall5(VMW_PORT_CMD_MSG |
+ (MSG_TYPE_SENDPAYLOAD << 16),
+ word, channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ecx);
}
return ecx;
@@ -220,22 +205,17 @@ static unsigned long vmw_port_hb_out(struct rpc_channel *channel,
static unsigned long vmw_port_hb_in(struct rpc_channel *channel, char *reply,
unsigned long reply_len, bool hb)
{
- unsigned long si, di, eax, ebx, ecx, edx;
+ u32 ebx, ecx, edx;
/* HB port can't access encrypted memory */
if (hb && !cc_platform_has(CC_ATTR_MEM_ENCRYPT)) {
- unsigned long bp = channel->cookie_low;
- u32 channel_id = (channel->channel_id << 16);
-
- si = channel->cookie_high;
- di = (uintptr_t) reply;
-
- VMW_PORT_HB_IN(
+ vmware_hypercall_hb_in(
(MESSAGE_STATUS_SUCCESS << 16) | VMW_PORT_CMD_HB_MSG,
- reply_len, si, di,
- VMWARE_HYPERVISOR_HB | channel_id,
- VMW_HYPERVISOR_MAGIC, bp,
- eax, ebx, ecx, edx, si, di);
+ reply_len,
+ channel->channel_id << 16,
+ channel->cookie_high,
+ (uintptr_t) reply, channel->cookie_low,
+ &ebx);
return ebx;
}
@@ -245,14 +225,13 @@ static unsigned long vmw_port_hb_in(struct rpc_channel *channel, char *reply,
while (reply_len) {
unsigned int bytes = min_t(unsigned long, reply_len, 4);
- si = channel->cookie_high;
- di = channel->cookie_low;
-
- VMW_PORT(VMW_PORT_CMD_MSG | (MSG_TYPE_RECVPAYLOAD << 16),
- MESSAGE_STATUS_SUCCESS, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall7(VMW_PORT_CMD_MSG |
+ (MSG_TYPE_RECVPAYLOAD << 16),
+ MESSAGE_STATUS_SUCCESS,
+ channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ebx, &ecx, &edx);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0)
break;
@@ -276,22 +255,18 @@ static unsigned long vmw_port_hb_in(struct rpc_channel *channel, char *reply,
*/
static int vmw_send_msg(struct rpc_channel *channel, const char *msg)
{
- unsigned long eax, ebx, ecx, edx, si, di;
+ u32 ebx, ecx;
size_t msg_len = strlen(msg);
int retries = 0;
while (retries < RETRIES) {
retries++;
- /* Set up additional parameters */
- si = channel->cookie_high;
- di = channel->cookie_low;
-
- VMW_PORT(VMW_PORT_CMD_SENDSIZE,
- msg_len, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall5(VMW_PORT_CMD_SENDSIZE,
+ msg_len, channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ecx);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0) {
/* Expected success. Give up. */
@@ -329,7 +304,7 @@ STACK_FRAME_NON_STANDARD(vmw_send_msg);
static int vmw_recv_msg(struct rpc_channel *channel, void **msg,
size_t *msg_len)
{
- unsigned long eax, ebx, ecx, edx, si, di;
+ u32 ebx, ecx, edx;
char *reply;
size_t reply_len;
int retries = 0;
@@ -341,15 +316,11 @@ static int vmw_recv_msg(struct rpc_channel *channel, void **msg,
while (retries < RETRIES) {
retries++;
- /* Set up additional parameters */
- si = channel->cookie_high;
- di = channel->cookie_low;
-
- VMW_PORT(VMW_PORT_CMD_RECVSIZE,
- 0, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall7(VMW_PORT_CMD_RECVSIZE,
+ 0, channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ebx, &ecx, &edx);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0) {
DRM_ERROR("Failed to get reply size for host message.\n");
@@ -384,16 +355,12 @@ static int vmw_recv_msg(struct rpc_channel *channel, void **msg,
reply[reply_len] = '\0';
-
- /* Ack buffer */
- si = channel->cookie_high;
- di = channel->cookie_low;
-
- VMW_PORT(VMW_PORT_CMD_RECVSTATUS,
- MESSAGE_STATUS_SUCCESS, si, di,
- channel->channel_id << 16,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall5(VMW_PORT_CMD_RECVSTATUS,
+ MESSAGE_STATUS_SUCCESS,
+ channel->channel_id << 16,
+ channel->cookie_high,
+ channel->cookie_low,
+ &ecx);
if ((HIGH_WORD(ecx) & MESSAGE_STATUS_SUCCESS) == 0) {
kfree(reply);
@@ -652,13 +619,7 @@ static inline void reset_ppn_array(PPN64 *arr, size_t size)
*/
static inline void hypervisor_ppn_reset_all(void)
{
- unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
-
- VMW_PORT(VMW_PORT_CMD_MKSGS_RESET,
- 0, si, di,
- 0,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall1(VMW_PORT_CMD_MKSGS_RESET, 0);
}
/**
@@ -669,13 +630,7 @@ static inline void hypervisor_ppn_reset_all(void)
*/
static inline void hypervisor_ppn_add(PPN64 pfn)
{
- unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
-
- VMW_PORT(VMW_PORT_CMD_MKSGS_ADD_PPN,
- (unsigned long)pfn, si, di,
- 0,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall1(VMW_PORT_CMD_MKSGS_ADD_PPN, (unsigned long)pfn);
}
/**
@@ -686,13 +641,7 @@ static inline void hypervisor_ppn_add(PPN64 pfn)
*/
static inline void hypervisor_ppn_remove(PPN64 pfn)
{
- unsigned long eax, ebx, ecx, edx, si = 0, di = 0;
-
- VMW_PORT(VMW_PORT_CMD_MKSGS_REMOVE_PPN,
- (unsigned long)pfn, si, di,
- 0,
- VMW_HYPERVISOR_MAGIC,
- eax, ebx, ecx, edx, si, di);
+ vmware_hypercall1(VMW_PORT_CMD_MKSGS_REMOVE_PPN, (unsigned long)pfn);
}
#if IS_ENABLED(CONFIG_DRM_VMWGFX_MKSSTATS)
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h
index 4f40167ad61f..29bd0af83038 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_arm64.h
@@ -34,6 +34,8 @@
#define VMWARE_HYPERVISOR_HB BIT(0)
#define VMWARE_HYPERVISOR_OUT BIT(1)
+#define VMWARE_HYPERVISOR_MAGIC 0x564D5868
+
#define X86_IO_MAGIC 0x86
#define X86_IO_W7_SIZE_SHIFT 0
@@ -45,86 +47,159 @@
#define X86_IO_W7_IMM_SHIFT 5
#define X86_IO_W7_IMM_MASK (0xff << X86_IO_W7_IMM_SHIFT)
-static inline void vmw_port(unsigned long cmd, unsigned long in_ebx,
- unsigned long in_si, unsigned long in_di,
- unsigned long flags, unsigned long magic,
- unsigned long *eax, unsigned long *ebx,
- unsigned long *ecx, unsigned long *edx,
- unsigned long *si, unsigned long *di)
+static inline
+unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)
{
- register u64 x0 asm("x0") = magic;
- register u64 x1 asm("x1") = in_ebx;
+ register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+ register u64 x1 asm("x1") = in1;
register u64 x2 asm("x2") = cmd;
- register u64 x3 asm("x3") = flags | VMWARE_HYPERVISOR_PORT;
- register u64 x4 asm("x4") = in_si;
- register u64 x5 asm("x5") = in_di;
+ register u64 x3 asm("x3") = VMWARE_HYPERVISOR_PORT;
+ register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
+ X86_IO_W7_WITH |
+ X86_IO_W7_DIR |
+ (2 << X86_IO_W7_SIZE_SHIFT);
+ asm_inline volatile (
+ "mrs xzr, mdccsr_el0; "
+ : "+r" (x0)
+ : "r" (x1), "r" (x2), "r" (x3), "r" (x7)
+ : "memory");
+
+ return x0;
+}
+
+static inline
+unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, uint32_t *out2)
+{
+ register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+ register u64 x1 asm("x1") = in1;
+ register u64 x2 asm("x2") = cmd;
+ register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT;
+ register u64 x4 asm("x4") = in4;
+ register u64 x5 asm("x5") = in5;
register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
X86_IO_W7_WITH |
X86_IO_W7_DIR |
(2 << X86_IO_W7_SIZE_SHIFT);
- asm volatile("mrs xzr, mdccsr_el0 \n\t"
- : "+r"(x0), "+r"(x1), "+r"(x2),
- "+r"(x3), "+r"(x4), "+r"(x5)
- : "r"(x7)
- :);
- *eax = x0;
- *ebx = x1;
- *ecx = x2;
- *edx = x3;
- *si = x4;
- *di = x5;
+ asm_inline volatile (
+ "mrs xzr, mdccsr_el0; "
+ : "+r" (x0), "+r" (x2)
+ : "r" (x1), "r" (x3), "r" (x4), "r" (x5), "r" (x7)
+ : "memory");
+
+ *out2 = x2;
+ return x0;
}
-static inline void vmw_port_hb(unsigned long cmd, unsigned long in_ecx,
- unsigned long in_si, unsigned long in_di,
- unsigned long flags, unsigned long magic,
- unsigned long bp, u32 w7dir,
- unsigned long *eax, unsigned long *ebx,
- unsigned long *ecx, unsigned long *edx,
- unsigned long *si, unsigned long *di)
+static inline
+unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,
+ unsigned long in3, uint32_t *out2,
+ uint32_t *out3, uint32_t *out4,
+ uint32_t *out5)
{
- register u64 x0 asm("x0") = magic;
+ register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+ register u64 x1 asm("x1") = in1;
+ register u64 x2 asm("x2") = cmd;
+ register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT;
+ register u64 x4 asm("x4");
+ register u64 x5 asm("x5");
+ register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
+ X86_IO_W7_WITH |
+ X86_IO_W7_DIR |
+ (2 << X86_IO_W7_SIZE_SHIFT);
+
+ asm_inline volatile (
+ "mrs xzr, mdccsr_el0; "
+ : "+r" (x0), "+r" (x2), "+r" (x3), "=r" (x4), "=r" (x5)
+ : "r" (x1), "r" (x7)
+ : "memory");
+
+ *out2 = x2;
+ *out3 = x3;
+ *out4 = x4;
+ *out5 = x5;
+ return x0;
+}
+
+static inline
+unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, uint32_t *out1,
+ uint32_t *out2, uint32_t *out3)
+{
+ register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
+ register u64 x1 asm("x1") = in1;
+ register u64 x2 asm("x2") = cmd;
+ register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT;
+ register u64 x4 asm("x4") = in4;
+ register u64 x5 asm("x5") = in5;
+ register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
+ X86_IO_W7_WITH |
+ X86_IO_W7_DIR |
+ (2 << X86_IO_W7_SIZE_SHIFT);
+
+ asm_inline volatile (
+ "mrs xzr, mdccsr_el0; "
+ : "+r" (x0), "+r" (x1), "+r" (x2), "+r" (x3)
+ : "r" (x4), "r" (x5), "r" (x7)
+ : "memory");
+
+ *out1 = x1;
+ *out2 = x2;
+ *out3 = x3;
+ return x0;
+}
+
+static inline
+unsigned long vmware_hypercall_hb(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1, int dir)
+{
+ register u64 x0 asm("x0") = VMWARE_HYPERVISOR_MAGIC;
register u64 x1 asm("x1") = cmd;
- register u64 x2 asm("x2") = in_ecx;
- register u64 x3 asm("x3") = flags | VMWARE_HYPERVISOR_PORT_HB;
- register u64 x4 asm("x4") = in_si;
- register u64 x5 asm("x5") = in_di;
- register u64 x6 asm("x6") = bp;
+ register u64 x2 asm("x2") = in2;
+ register u64 x3 asm("x3") = in3 | VMWARE_HYPERVISOR_PORT_HB;
+ register u64 x4 asm("x4") = in4;
+ register u64 x5 asm("x5") = in5;
+ register u64 x6 asm("x6") = in6;
register u64 x7 asm("x7") = ((u64)X86_IO_MAGIC << 32) |
X86_IO_W7_STR |
X86_IO_W7_WITH |
- w7dir;
-
- asm volatile("mrs xzr, mdccsr_el0 \n\t"
- : "+r"(x0), "+r"(x1), "+r"(x2),
- "+r"(x3), "+r"(x4), "+r"(x5)
- : "r"(x6), "r"(x7)
- :);
- *eax = x0;
- *ebx = x1;
- *ecx = x2;
- *edx = x3;
- *si = x4;
- *di = x5;
-}
+ dir;
-#define VMW_PORT(cmd, in_ebx, in_si, in_di, flags, magic, eax, ebx, ecx, edx, \
- si, di) \
- vmw_port(cmd, in_ebx, in_si, in_di, flags, magic, &eax, &ebx, &ecx, \
- &edx, &si, &di)
+ asm_inline volatile (
+ "mrs xzr, mdccsr_el0; "
+ : "+r" (x0), "+r" (x1)
+ : "r" (x2), "r" (x3), "r" (x4), "r" (x5),
+ "r" (x6), "r" (x7)
+ : "memory");
-#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di, flags, magic, bp, eax, ebx, \
- ecx, edx, si, di) \
- vmw_port_hb(cmd, in_ecx, in_si, in_di, flags, magic, bp, \
- 0, &eax, &ebx, &ecx, &edx, &si, &di)
+ *out1 = x1;
+ return x0;
+}
-#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di, flags, magic, bp, eax, ebx, \
- ecx, edx, si, di) \
- vmw_port_hb(cmd, in_ecx, in_si, in_di, flags, magic, bp, \
- X86_IO_W7_DIR, &eax, &ebx, &ecx, &edx, &si, &di)
+static inline
+unsigned long vmware_hypercall_hb_out(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1)
+{
+ return vmware_hypercall_hb(cmd, in2, in3, in4, in5, in6, out1, 0);
+}
+static inline
+unsigned long vmware_hypercall_hb_in(unsigned long cmd, unsigned long in2,
+ unsigned long in3, unsigned long in4,
+ unsigned long in5, unsigned long in6,
+ uint32_t *out1)
+{
+ return vmware_hypercall_hb(cmd, in2, in3, in4, in5, in6, out1,
+ X86_IO_W7_DIR);
+}
#endif
#endif /* _VMWGFX_MSG_ARM64_H */
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
index e040ee21ea1a..13304d34cc6e 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_msg_x86.h
@@ -37,193 +37,6 @@
#include <asm/vmware.h>
-/**
- * Hypervisor-specific bi-directional communication channel. Should never
- * execute on bare metal hardware. The caller must make sure to check for
- * supported hypervisor before using these macros.
- *
- * The last two parameters are both input and output and must be initialized.
- *
- * @cmd: [IN] Message Cmd
- * @in_ebx: [IN] Message Len, through EBX
- * @in_si: [IN] Input argument through SI, set to 0 if not used
- * @in_di: [IN] Input argument through DI, set ot 0 if not used
- * @flags: [IN] hypercall flags + [channel id]
- * @magic: [IN] hypervisor magic value
- * @eax: [OUT] value of EAX register
- * @ebx: [OUT] e.g. status from an HB message status command
- * @ecx: [OUT] e.g. status from a non-HB message status command
- * @edx: [OUT] e.g. channel id
- * @si: [OUT]
- * @di: [OUT]
- */
-#define VMW_PORT(cmd, in_ebx, in_si, in_di, \
- flags, magic, \
- eax, ebx, ecx, edx, si, di) \
-({ \
- asm volatile (VMWARE_HYPERCALL : \
- "=a"(eax), \
- "=b"(ebx), \
- "=c"(ecx), \
- "=d"(edx), \
- "=S"(si), \
- "=D"(di) : \
- [port] "i" (VMWARE_HYPERVISOR_PORT), \
- [mode] "m" (vmware_hypercall_mode), \
- "a"(magic), \
- "b"(in_ebx), \
- "c"(cmd), \
- "d"(flags), \
- "S"(in_si), \
- "D"(in_di) : \
- "memory"); \
-})
-
-
-/**
- * Hypervisor-specific bi-directional communication channel. Should never
- * execute on bare metal hardware. The caller must make sure to check for
- * supported hypervisor before using these macros.
- *
- * The last 3 parameters are both input and output and must be initialized.
- *
- * @cmd: [IN] Message Cmd
- * @in_ecx: [IN] Message Len, through ECX
- * @in_si: [IN] Input argument through SI, set to 0 if not used
- * @in_di: [IN] Input argument through DI, set to 0 if not used
- * @flags: [IN] hypercall flags + [channel id]
- * @magic: [IN] hypervisor magic value
- * @bp: [IN]
- * @eax: [OUT] value of EAX register
- * @ebx: [OUT] e.g. status from an HB message status command
- * @ecx: [OUT] e.g. status from a non-HB message status command
- * @edx: [OUT] e.g. channel id
- * @si: [OUT]
- * @di: [OUT]
- */
-#ifdef __x86_64__
-
-#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di, \
- flags, magic, bp, \
- eax, ebx, ecx, edx, si, di) \
-({ \
- asm volatile ( \
- UNWIND_HINT_SAVE \
- "push %%rbp;" \
- UNWIND_HINT_UNDEFINED \
- "mov %12, %%rbp;" \
- "rep outsb;" \
- "pop %%rbp;" \
- UNWIND_HINT_RESTORE : \
- "=a"(eax), \
- "=b"(ebx), \
- "=c"(ecx), \
- "=d"(edx), \
- "=S"(si), \
- "=D"(di) : \
- "a"(magic), \
- "b"(cmd), \
- "c"(in_ecx), \
- "d"(flags), \
- "S"(in_si), \
- "D"(in_di), \
- "r"(bp) : \
- "memory", "cc"); \
-})
-
-
-#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di, \
- flags, magic, bp, \
- eax, ebx, ecx, edx, si, di) \
-({ \
- asm volatile ( \
- UNWIND_HINT_SAVE \
- "push %%rbp;" \
- UNWIND_HINT_UNDEFINED \
- "mov %12, %%rbp;" \
- "rep insb;" \
- "pop %%rbp;" \
- UNWIND_HINT_RESTORE : \
- "=a"(eax), \
- "=b"(ebx), \
- "=c"(ecx), \
- "=d"(edx), \
- "=S"(si), \
- "=D"(di) : \
- "a"(magic), \
- "b"(cmd), \
- "c"(in_ecx), \
- "d"(flags), \
- "S"(in_si), \
- "D"(in_di), \
- "r"(bp) : \
- "memory", "cc"); \
-})
-
-#elif defined(__i386__)
-
-/*
- * In the 32-bit version of this macro, we store bp in a memory location
- * because we've ran out of registers.
- * Now we can't reference that memory location while we've modified
- * %esp or %ebp, so we first push it on the stack, just before we push
- * %ebp, and then when we need it we read it from the stack where we
- * just pushed it.
- */
-#define VMW_PORT_HB_OUT(cmd, in_ecx, in_si, in_di, \
- flags, magic, bp, \
- eax, ebx, ecx, edx, si, di) \
-({ \
- asm volatile ("push %12;" \
- "push %%ebp;" \
- "mov 0x04(%%esp), %%ebp;" \
- VMWARE_HYPERCALL_HB_OUT \
- "pop %%ebp;" \
- "add $0x04, %%esp;" : \
- "=a"(eax), \
- "=b"(ebx), \
- "=c"(ecx), \
- "=d"(edx), \
- "=S"(si), \
- "=D"(di) : \
- "a"(magic), \
- "b"(cmd), \
- "c"(in_ecx), \
- "d"(flags), \
- "S"(in_si), \
- "D"(in_di), \
- "m"(bp) : \
- "memory", "cc"); \
-})
-
-
-#define VMW_PORT_HB_IN(cmd, in_ecx, in_si, in_di, \
- flags, magic, bp, \
- eax, ebx, ecx, edx, si, di) \
-({ \
- asm volatile ("push %12;" \
- "push %%ebp;" \
- "mov 0x04(%%esp), %%ebp;" \
- VMWARE_HYPERCALL_HB_IN \
- "pop %%ebp;" \
- "add $0x04, %%esp;" : \
- "=a"(eax), \
- "=b"(ebx), \
- "=c"(ecx), \
- "=d"(edx), \
- "=S"(si), \
- "=D"(di) : \
- "a"(magic), \
- "b"(cmd), \
- "c"(in_ecx), \
- "d"(flags), \
- "S"(in_si), \
- "D"(in_di), \
- "m"(bp) : \
- "memory", "cc"); \
-})
-#endif /* defined(__i386__) */
-
#endif /* defined(__i386__) || defined(__x86_64__) */
#endif /* _VMWGFX_MSG_X86_H */
--
2.39.0
On Mon, May 06, 2024 at 02:52:58PM -0700, Alexey Makhalov wrote:
> +#define VMWARE_HYPERVISOR_PORT 0x5658
> +#define VMWARE_HYPERVISOR_PORT_HB (VMWARE_HYPERVISOR_PORT | \
> + VMWARE_HYPERVISOR_HB)
You can't help yourself not sneaking in any changes which are not code
movement, can ya?
The purpose of a sole code movement patch is to ease the review. Not to
have to look at the code movement *and* some *additional* changes which
you've done in-flight. Just because you felt like it. But which is nasty
to review.
Maybe you'll understand that better when you get to review someone
else's patch which does crap like that.
Make sure you remember that in the future, when sending patches.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
On Mon, May 06, 2024 at 02:53:00PM -0700, Alexey Makhalov wrote:
> +#define VMWARE_HYPERCALL \
> + ALTERNATIVE_3("cmpb $" \
> + __stringify(CPUID_VMWARE_FEATURES_ECX_VMMCALL) \
> + ", %[mode]\n\t" \
> + "jg 2f\n\t" \
> + "je 1f\n\t" \
> + "movw %[port], %%dx\n\t" \
> + "inl (%%dx), %%eax\n\t" \
> + "jmp 3f\n\t" \
> + "1: vmmcall\n\t" \
> + "jmp 3f\n\t" \
> + "2: vmcall\n\t" \
> + "3:\n\t", \
> + "movw %[port], %%dx\n\t" \
> + "inl (%%dx), %%eax", X86_FEATURE_HYPERVISOR, \
That's a bunch of insns and their size would inadvertently go into the final
image.
What you should try to do is something like this:
ALTERNATIVE_3("jmp .Lend_legacy_call", "", X86_FEATURE_HYPERVISOR,
"vmcall; jmp .Lend_legacy_call", X86_FEATURE_VMCALL,
"vmmcall; jmp .Lend_legacy_call", X86_FEATURE_VMW_VMMCALL)
/* bunch of conditional branches and INs and V*MCALLs, etc go here */
.Lend_legacy_call:
so that you don't have these 26 bytes, as you say, of alternatives to patch but
only the JMPs and the VM*CALLs.
See for an example the macros in arch/x86/entry/calling.h which simply jump
over the code when not needed.
Also, you could restructure the alternative differently so that that bunch of
insns call is completely out-of-line because all current machines support
VM*CALL so you won't even need to patch. You only get to patch when running on
some old rust and there you can just as well go completely out-of-line.
Something along those lines, anyway.
> - * The high bandwidth in call. The low word of edx is presumed to have the
> - * HB bit set.
> + * High bandwidth calls are not supported on encrypted memory guests.
> + * The caller should check cc_platform_has(CC_ATTR_MEM_ENCRYPT) and use
> + * low bandwidth hypercall it memory encryption is set.
s/it/if/
> -#define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \
> - __asm__("inl (%%dx), %%eax" : \
> - "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
> - "a"(VMWARE_HYPERVISOR_MAGIC), \
> - "c"(VMWARE_CMD_##cmd), \
> - "d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) : \
> - "memory")
> -
> -#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx) \
> - __asm__("vmcall" : \
> - "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
> - "a"(VMWARE_HYPERVISOR_MAGIC), \
> - "c"(VMWARE_CMD_##cmd), \
> - "d"(0), "b"(UINT_MAX) : \
> - "memory")
> -
> -#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx) \
> - __asm__("vmmcall" : \
> - "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
> - "a"(VMWARE_HYPERVISOR_MAGIC), \
> - "c"(VMWARE_CMD_##cmd), \
> - "d"(0), "b"(UINT_MAX) : \
> - "memory")
> -
> -#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do { \
> - switch (vmware_hypercall_mode) { \
> - case CPUID_VMWARE_FEATURES_ECX_VMCALL: \
> - VMWARE_VMCALL(cmd, eax, ebx, ecx, edx); \
> - break; \
> - case CPUID_VMWARE_FEATURES_ECX_VMMCALL: \
> - VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx); \
> - break; \
> - default: \
> - VMWARE_PORT(cmd, eax, ebx, ecx, edx); \
> - break; \
> - } \
> - } while (0)
You're kidding, right?
You went to all that trouble in patch 1 to move those to the header only to
*remove* them here?
You do realize that that is a unnecessary churn for no good reason, right?
So that set needs to be restructured differently.
* first patch introduces those new API calls.
* follow-on patches convert the callers to the new API
* last patch removes the old API.
Ok?
And when you redo them, make sure you drop all Reviewed-by tags because the new
versions are not reviewed anymore.
Thx.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
On 5/7/24 2:58 AM, Borislav Petkov wrote:
> On Mon, May 06, 2024 at 02:53:00PM -0700, Alexey Makhalov wrote:
>> +#define VMWARE_HYPERCALL \
>> + ALTERNATIVE_3("cmpb $" \
>> + __stringify(CPUID_VMWARE_FEATURES_ECX_VMMCALL) \
>> + ", %[mode]\n\t" \
>> + "jg 2f\n\t" \
>> + "je 1f\n\t" \
>> + "movw %[port], %%dx\n\t" \
>> + "inl (%%dx), %%eax\n\t" \
>> + "jmp 3f\n\t" \
>> + "1: vmmcall\n\t" \
>> + "jmp 3f\n\t" \
>> + "2: vmcall\n\t" \
>> + "3:\n\t", \
>> + "movw %[port], %%dx\n\t" \
>> + "inl (%%dx), %%eax", X86_FEATURE_HYPERVISOR, \
>
> That's a bunch of insns and their size would inadvertently go into the final
> image.
>
> What you should try to do is something like this:
>
> ALTERNATIVE_3("jmp .Lend_legacy_call", "", X86_FEATURE_HYPERVISOR,
> "vmcall; jmp .Lend_legacy_call", X86_FEATURE_VMCALL,
> "vmmcall; jmp .Lend_legacy_call", X86_FEATURE_VMW_VMMCALL)
>
> /* bunch of conditional branches and INs and V*MCALLs, etc go here */
>
> .Lend_legacy_call:
>
> so that you don't have these 26 bytes, as you say, of alternatives to patch but
> only the JMPs and the VM*CALLs.
>
> See for an example the macros in arch/x86/entry/calling.h which simply jump
> over the code when not needed.
Good idea!
>
> Also, you could restructure the alternative differently so that that bunch of
> insns call is completely out-of-line because all current machines support
> VM*CALL so you won't even need to patch. You only get to patch when running on
> some old rust and there you can just as well go completely out-of-line.
>
Alternatives patching has not been performed at platform detection time.
And platform detection hypercalls should work on all machines.
That is the reason we have IN as a default hypercall behavior.
> Something along those lines, anyway.
>
>> - * The high bandwidth in call. The low word of edx is presumed to have the
>> - * HB bit set.
>> + * High bandwidth calls are not supported on encrypted memory guests.
>> + * The caller should check cc_platform_has(CC_ATTR_MEM_ENCRYPT) and use
>> + * low bandwidth hypercall it memory encryption is set.
>
> s/it/if/
Acked.
>
>> -#define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \
>> - __asm__("inl (%%dx), %%eax" : \
>> - "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
>> - "a"(VMWARE_HYPERVISOR_MAGIC), \
>> - "c"(VMWARE_CMD_##cmd), \
>> - "d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) : \
>> - "memory")
>> -
>> -#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx) \
>> - __asm__("vmcall" : \
>> - "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
>> - "a"(VMWARE_HYPERVISOR_MAGIC), \
>> - "c"(VMWARE_CMD_##cmd), \
>> - "d"(0), "b"(UINT_MAX) : \
>> - "memory")
>> -
>> -#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx) \
>> - __asm__("vmmcall" : \
>> - "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
>> - "a"(VMWARE_HYPERVISOR_MAGIC), \
>> - "c"(VMWARE_CMD_##cmd), \
>> - "d"(0), "b"(UINT_MAX) : \
>> - "memory")
>> -
>> -#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do { \
>> - switch (vmware_hypercall_mode) { \
>> - case CPUID_VMWARE_FEATURES_ECX_VMCALL: \
>> - VMWARE_VMCALL(cmd, eax, ebx, ecx, edx); \
>> - break; \
>> - case CPUID_VMWARE_FEATURES_ECX_VMMCALL: \
>> - VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx); \
>> - break; \
>> - default: \
>> - VMWARE_PORT(cmd, eax, ebx, ecx, edx); \
>> - break; \
>> - } \
>> - } while (0)
>
> You're kidding, right?
>
> You went to all that trouble in patch 1 to move those to the header only to
> *remove* them here?
>
> You do realize that that is a unnecessary churn for no good reason, right?
>
> So that set needs to be restructured differently.
>
> * first patch introduces those new API calls.
>
> * follow-on patches convert the callers to the new API
>
> * last patch removes the old API.
>
> Ok?
My intention was to have a implementation transformation from locals
macro through common macros to common API.
What you are suggesting will eliminate unnecessary patches. It makes sense.
Will perform this restructuring in v10.
>
> And when you redo them, make sure you drop all Reviewed-by tags because the new
> versions are not reviewed anymore.
Noted.
Thanks again,
--Alexey
On 5/7/24 2:14 AM, Borislav Petkov wrote:
> On Mon, May 06, 2024 at 02:52:58PM -0700, Alexey Makhalov wrote:
>> +#define VMWARE_HYPERVISOR_PORT 0x5658
>> +#define VMWARE_HYPERVISOR_PORT_HB (VMWARE_HYPERVISOR_PORT | \
>> + VMWARE_HYPERVISOR_HB)
>
> You can't help yourself not sneaking in any changes which are not code
> movement, can ya?
Indeed! My fault.
>
> The purpose of a sole code movement patch is to ease the review. Not to
> have to look at the code movement *and* some *additional* changes which
> you've done in-flight. Just because you felt like it. But which is nasty
> to review.
Agree. I should not claim it as sole code movement then.
At least moving macros from .c to .h file requires changing
vmware_hypercall_mode variable visibility from static to global.
If you think this type of changes is Ok for sole code movement patch,
then I'll continue following this path. Otherwise, will change patch
description.
Thanks for the patience.
--Alexey
Hi Alexey,
kernel test robot noticed the following build errors:
[auto build test ERROR on drm-misc/drm-misc-next]
[also build test ERROR on dtor-input/next dtor-input/for-linus linus/master v6.9-rc7 next-20240509]
[cannot apply to tip/x86/vmware]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Alexey-Makhalov/x86-vmware-Move-common-macros-to-vmware-h/20240507-055606
base: git://anongit.freedesktop.org/drm/drm-misc drm-misc-next
patch link: https://lore.kernel.org/r/20240506215305.30756-4-alexey.makhalov%40broadcom.com
patch subject: [PATCH v9 3/8] x86/vmware: Introduce VMware hypercall API
config: x86_64-buildonly-randconfig-003-20240510 (https://download.01.org/0day-ci/archive/20240510/[email protected]/config)
compiler: gcc-11 (Ubuntu 11.4.0-4ubuntu1) 11.4.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240510/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All errors (new ones prefixed by >>):
ld: drivers/gpu/drm/vmwgfx/vmwgfx_msg.o: in function `vmw_close_channel':
>> vmwgfx_msg.c:(.text+0xaf): undefined reference to `vmware_hypercall_mode'
ld: drivers/gpu/drm/vmwgfx/vmwgfx_msg.o: in function `vmw_port_hb_in':
vmwgfx_msg.c:(.text+0x2c4): undefined reference to `vmware_hypercall_mode'
ld: drivers/gpu/drm/vmwgfx/vmwgfx_msg.o: in function `vmw_port_hb_out':
vmwgfx_msg.c:(.text+0x604): undefined reference to `vmware_hypercall_mode'
ld: drivers/gpu/drm/vmwgfx/vmwgfx_msg.o: in function `vmw_send_msg':
vmwgfx_msg.c:(.text+0x8b0): undefined reference to `vmware_hypercall_mode'
ld: drivers/gpu/drm/vmwgfx/vmwgfx_msg.o: in function `vmw_open_channel.constprop.0':
vmwgfx_msg.c:(.text+0x9e8): undefined reference to `vmware_hypercall_mode'
ld: drivers/gpu/drm/vmwgfx/vmwgfx_msg.o:vmwgfx_msg.c:(.text+0xc3c): more undefined references to `vmware_hypercall_mode' follow
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
Hi Alexey,
kernel test robot noticed the following build errors:
[auto build test ERROR on drm-misc/drm-misc-next]
[also build test ERROR on dtor-input/next dtor-input/for-linus linus/master v6.9-rc7 next-20240509]
[cannot apply to tip/x86/vmware]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Alexey-Makhalov/x86-vmware-Move-common-macros-to-vmware-h/20240507-055606
base: git://anongit.freedesktop.org/drm/drm-misc drm-misc-next
patch link: https://lore.kernel.org/r/20240506215305.30756-7-alexey.makhalov%40broadcom.com
patch subject: [PATCH v9 6/8] drm/vmwgfx: Use VMware hypercall API
config: x86_64-buildonly-randconfig-003-20240510 (https://download.01.org/0day-ci/archive/20240510/[email protected]/config)
compiler: gcc-11 (Ubuntu 11.4.0-4ubuntu1) 11.4.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240510/[email protected]/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All errors (new ones prefixed by >>):
ld: drivers/gpu/drm/vmwgfx/vmwgfx_msg.o: in function `vmw_port_hb_out':
vmwgfx_msg.c:(.text+0x182): undefined reference to `vmware_hypercall_mode'
ld: drivers/gpu/drm/vmwgfx/vmwgfx_msg.o: in function `vmw_send_msg':
vmwgfx_msg.c:(.text+0x46d): undefined reference to `vmware_hypercall_mode'
ld: drivers/gpu/drm/vmwgfx/vmwgfx_msg.o: in function `vmw_recv_msg':
vmwgfx_msg.c:(.text+0x6f4): undefined reference to `vmware_hypercall_mode'
>> ld: vmwgfx_msg.c:(.text+0x875): undefined reference to `vmware_hypercall_mode'
ld: vmwgfx_msg.c:(.text+0xae0): undefined reference to `vmware_hypercall_mode'
ld: drivers/gpu/drm/vmwgfx/vmwgfx_msg.o:vmwgfx_msg.c:(.text+0x136e): more undefined references to `vmware_hypercall_mode' follow
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
On Mon, May 06, 2024 at 02:53:00PM -0700, Alexey Makhalov wrote:
> Introduce vmware_hypercall family of functions. It is a common
> implementation to be used by the VMware guest code and virtual
> device drivers in architecture independent manner.
>
> The API consists of vmware_hypercallX and vmware_hypercall_hb_{out,in}
> set of functions by analogy with KVM hypercall API. Architecture
> specific implementation is hidden inside.
>
> It will simplify future enhancements in VMware hypercalls such
> as SEV-ES and TDX related changes without needs to modify a
> caller in device drivers code.
>
> Current implementation extends an idea from commit bac7b4e84323
> ("x86/vmware: Update platform detection code for VMCALL/VMMCALL
> hypercalls") to have a slow, but safe path in VMWARE_HYPERCALL
> earlier during the boot when alternatives are not yet applied.
> This logic was inherited from VMWARE_CMD from the commit mentioned
> above. Default alternative code was optimized by size to reduce
> excessive nop alignment once alternatives are applied. Total
> default code size is 26 bytes, in worse case (3 bytes alternative)
> remaining 23 bytes will be aligned by only 3 long NOP instructions.
>
> Signed-off-by: Alexey Makhalov <[email protected]>
> Reviewed-by: Nadav Amit <[email protected]>
> Reviewed-by: Jeff Sipek <[email protected]>
..
> diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
..
> +static inline
> +unsigned long vmware_hypercall3(unsigned long cmd, unsigned long in1,
> + uint32_t *out1, uint32_t *out2)
nit: u32 is preferred over uint32_t.
Likewise elsewhere in this patch-set.
..
> /*
> - * The high bandwidth in call. The low word of edx is presumed to have the
> - * HB bit set.
> + * High bandwidth calls are not supported on encrypted memory guests.
> + * The caller should check cc_platform_has(CC_ATTR_MEM_ENCRYPT) and use
> + * low bandwidth hypercall it memory encryption is set.
> + * This assumption simplifies HB hypercall impementation to just I/O port
nit: implementation
checkpatch.pl --codespell is your friend
> + * based approach without alternative patching.
> */
..
Hi Simon, apologize for long delay
On 5/11/24 8:02 AM, Simon Horman wrote:
>> diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
>
> ...
>
>> +static inline
>> +unsigned long vmware_hypercall3(unsigned long cmd, unsigned long in1,
>> + uint32_t *out1, uint32_t *out2)
>
> nit: u32 is preferred over uint32_t.
> Likewise elsewhere in this patch-set.
Good to know. Can you please shed a light on the reason?
I still see bunch of stdint style uint32_t in arch/x86.
> ...
>
>> /*
>> - * The high bandwidth in call. The low word of edx is presumed to have the
>> - * HB bit set.
>> + * High bandwidth calls are not supported on encrypted memory guests.
>> + * The caller should check cc_platform_has(CC_ATTR_MEM_ENCRYPT) and use
>> + * low bandwidth hypercall it memory encryption is set.
>> + * This assumption simplifies HB hypercall impementation to just I/O port
>
> nit: implementation
>
> checkpatch.pl --codespell is your friend
Thanks, that is useful!
>
>> + * based approach without alternative patching.
>> */
>
> ...
[ resending as I mangled the previous attempt , sorry ]
+ Joe Perches
On Wed, May 22, 2024 at 04:39:57PM -0700, Alexey Makhalov wrote:
> Hi Simon, apologize for long delay
>
> On 5/11/24 8:02 AM, Simon Horman wrote:
> > > diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
> >
> > ...
> >
> > > +static inline
> > > +unsigned long vmware_hypercall3(unsigned long cmd, unsigned long in1,
> > > + uint32_t *out1, uint32_t *out2)
> >
> > nit: u32 is preferred over uint32_t.
> > Likewise elsewhere in this patch-set.
> Good to know. Can you please shed a light on the reason?
> I still see bunch of stdint style uint32_t in arch/x86.
Perhaps there is a document on this that I should know about.
But AFAIK, u32 and so on are Linux kernel types,
while uint32_t are C99-standard types.
Joe, are you able to shed any further light on this?
..