Add a compatible property specific to IPQ9574. This should be used
along with the IPQ4019 compatible. This second compatible serves the
same purpose as the ipq{5,6,8} compatibles. This is to indicate that
the clocks properties are required.
Signed-off-by: Alexandru Gagniuc <[email protected]>
Acked-by: Conor Dooley <[email protected]>
---
Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
index 0029e197a825..a94480e819ac 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
@@ -20,6 +20,7 @@ properties:
- enum:
- qcom,ipq6018-mdio
- qcom,ipq8074-mdio
+ - qcom,ipq9574-mdio
- const: qcom,ipq4019-mdio
"#address-cells":
@@ -76,6 +77,7 @@ allOf:
- qcom,ipq5018-mdio
- qcom,ipq6018-mdio
- qcom,ipq8074-mdio
+ - qcom,ipq9574-mdio
then:
required:
- clocks
--
2.40.1
The IPQ95xx uses an IPQ4019 compatible MDIO controller that is already
supported. Add a DT node to expose it.
Signed-off-by: Alexandru Gagniuc <[email protected]>
---
changes since v1:
- pad "reg" address to eight digits with leading zeroes
arch/arm64/boot/dts/qcom/ipq9574.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 7f2e5cbf3bbb..ded02bc39275 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -232,6 +232,16 @@ rng: rng@e3000 {
clock-names = "core";
};
+ mdio: mdio@90000 {
+ compatible = "qcom,ipq9574-mdio", "qcom,ipq4019-mdio";
+ reg = <0x00090000 0x64>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&gcc GCC_MDIO_AHB_CLK>;
+ clock-names = "gcc_mdio_ahb_clk";
+ status = "disabled";
+ };
+
qfprom: efuse@a4000 {
compatible = "qcom,ipq9574-qfprom", "qcom,qfprom";
reg = <0x000a4000 0x5a1>;
--
2.40.1
Hello:
This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <[email protected]>:
On Mon, 6 May 2024 21:47:57 -0500 you wrote:
> Add a compatible property specific to IPQ9574. This should be used
> along with the IPQ4019 compatible. This second compatible serves the
> same purpose as the ipq{5,6,8} compatibles. This is to indicate that
> the clocks properties are required.
>
> Signed-off-by: Alexandru Gagniuc <[email protected]>
> Acked-by: Conor Dooley <[email protected]>
>
> [...]
Here is the summary with links:
- [v2,1/2] dt-bindings: net: ipq4019-mdio: add IPQ9574 compatible
https://git.kernel.org/netdev/net-next/c/3a2a192b0ef1
- [v2,2/2] arm64: dts: qcom: ipq9574: add MDIO bus
(no matching commit)
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html