The Amlogic A1 SoC family utilizes static operating points and a
PWM-controlled core voltage regulator, which is specific to the board.
As the main CPU clock input, the SoC uses CLKID_CPU_CLK from the CPU
clock controller, which can be inherited from the system PLL (syspll) or
a fixed CPU clock.
Currently, the stable operating points at all frequencies are set to
800mV. This value is obtained from the vendor setup of several A1
boards.
Signed-off-by: Dmitry Rokosov <[email protected]>
---
arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 44 +++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index 785778f3a7da..fa13dd6ed03d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -33,6 +33,13 @@ cpu0: cpu@0 {
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&l2>;
+ clocks = <&clkc_cpu CLKID_CPU_CLK>;
+ clock-names = "core_clk";
+ operating-points-v2 = <&cpu_opp_table0>;
+ voltage-tolerance = <0>;
+ clock-latency = <50000>;
+ capacity-dmips-mhz = <400>;
+ dynamic-power-coefficient = <80>;
#cooling-cells = <2>;
};
@@ -42,6 +49,13 @@ cpu1: cpu@1 {
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&l2>;
+ clocks = <&clkc_cpu CLKID_CPU_CLK>;
+ clock-names = "core_clk";
+ operating-points-v2 = <&cpu_opp_table0>;
+ voltage-tolerance = <0>;
+ clock-latency = <50000>;
+ capacity-dmips-mhz = <400>;
+ dynamic-power-coefficient = <80>;
#cooling-cells = <2>;
};
@@ -52,6 +66,36 @@ l2: l2-cache0 {
};
};
+ cpu_opp_table0: cpu_opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <128000000>;
+ opp-microvolt = <800000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <256000000>;
+ opp-microvolt = <800000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <512000000>;
+ opp-microvolt = <800000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <768000000>;
+ opp-microvolt = <800000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <800000>;
+ };
+ opp05 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <800000>;
+ };
+ };
+
efuse: efuse {
compatible = "amlogic,meson-gxbb-efuse";
clocks = <&clkc_periphs CLKID_OTP>;
--
2.43.0