Hello everyone,
This is V13 for the link topology addition, allowing to track all PHYs
that are linked to netdevices.
This version is based on the V12, and addresses the missing
documentation for the return code of some helpersn, and gathers the
review from Köry.
Discussions on the patch 01/13 updates can be found here :
https://lore.kernel.org/netdev/[email protected]/
https://lore.kernel.org/netdev/[email protected]/
https://lore.kernel.org/netdev/[email protected]/
As a remainder, here's what the PHY listings would look like :
- eth0 has a 88x3310 acting as media converter, and an SFP module with
an embedded 88e1111 PHY
- eth2 has a 88e1510 PHY
# ethtool --show-phys *
PHY for eth0:
PHY index: 1
Driver name: mv88x3310
PHY device name: f212a600.mdio-mii:00
Downstream SFP bus name: sfp-eth0
PHY id: 0
Upstream type: MAC
PHY for eth0:
PHY index: 2
Driver name: Marvell 88E1111
PHY device name: i2c:sfp-eth0:16
PHY id: 21040322
Upstream type: PHY
Upstream PHY index: 1
Upstream SFP name: sfp-eth0
PHY for eth2:
PHY index: 1
Driver name: Marvell 88E1510
PHY device name: f212a200.mdio-mii:00
PHY id: 21040593
Upstream type: MAC
Ethtool patches : https://github.com/minimaxwell/ethtool/tree/mc/main
Link to v12: https://lore.kernel.org/netdev/[email protected]/
Link to v11: https://lore.kernel.org/netdev/[email protected]/
Link to V10: https://lore.kernel.org/netdev/[email protected]/
Link to V9: https://lore.kernel.org/netdev/[email protected]/
Link to V8: https://lore.kernel.org/netdev/[email protected]/
Link to V7: https://lore.kernel.org/netdev/[email protected]/
Link to V6: https://lore.kernel.org/netdev/[email protected]/
Link to V5: https://lore.kernel.org/netdev/[email protected]/
Link to V4: https://lore.kernel.org/netdev/[email protected]/
Link to V3: https://lore.kernel.org/netdev/[email protected]/
Link to V2: https://lore.kernel.org/netdev/[email protected]/
Link to V1: https://lore.kernel.org/netdev/[email protected]/
Maxime Chevallier (13):
net: phy: Introduce ethernet link topology representation
net: sfp: pass the phy_device when disconnecting an sfp module's PHY
net: phy: add helpers to handle sfp phy connect/disconnect
net: sfp: Add helper to return the SFP bus name
net: ethtool: Allow passing a phy index for some commands
netlink: specs: add phy-index as a header parameter
net: ethtool: Introduce a command to list PHYs on an interface
netlink: specs: add ethnl PHY_GET command set
net: ethtool: plca: Target the command to the requested PHY
net: ethtool: pse-pd: Target the command to the requested PHY
net: ethtool: cable-test: Target the command to the requested PHY
net: ethtool: strset: Allow querying phy stats by index
Documentation: networking: document phy_link_topology
Documentation/netlink/specs/ethtool.yaml | 62 ++++
Documentation/networking/ethtool-netlink.rst | 52 +++
Documentation/networking/index.rst | 1 +
.../networking/phy-link-topology.rst | 121 +++++++
MAINTAINERS | 1 +
drivers/net/phy/Makefile | 2 +-
drivers/net/phy/marvell-88x2222.c | 2 +
drivers/net/phy/marvell.c | 2 +
drivers/net/phy/marvell10g.c | 2 +
drivers/net/phy/phy_device.c | 48 +++
drivers/net/phy/phy_link_topology.c | 105 ++++++
drivers/net/phy/phylink.c | 3 +-
drivers/net/phy/qcom/at803x.c | 2 +
drivers/net/phy/qcom/qca807x.c | 2 +
drivers/net/phy/sfp-bus.c | 15 +-
include/linux/netdevice.h | 4 +-
include/linux/phy.h | 6 +
include/linux/phy_link_topology.h | 82 +++++
include/linux/sfp.h | 8 +-
include/uapi/linux/ethtool.h | 16 +
include/uapi/linux/ethtool_netlink.h | 21 ++
net/core/dev.c | 15 +
net/ethtool/Makefile | 2 +-
net/ethtool/cabletest.c | 16 +-
net/ethtool/netlink.c | 57 +++-
net/ethtool/netlink.h | 10 +
net/ethtool/phy.c | 306 ++++++++++++++++++
net/ethtool/plca.c | 19 +-
net/ethtool/pse-pd.c | 16 +-
net/ethtool/strset.c | 17 +-
30 files changed, 970 insertions(+), 45 deletions(-)
create mode 100644 Documentation/networking/phy-link-topology.rst
create mode 100644 drivers/net/phy/phy_link_topology.c
create mode 100644 include/linux/phy_link_topology.h
create mode 100644 net/ethtool/phy.c
--
2.45.1
Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use
with an SFP connector, on which an SFP transceiver containing a PHY can
be used.
With the current model, the transceiver's PHY can't be used for
operations such as cable testing, timestamping, macsec offload, etc.
The reason being that most of the logic for these configuration, coming
from either ethtool netlink or ioctls tend to use netdev->phydev, which
in multi-phy systems will reference the PHY closest to the MAC.
Introduce a numbering scheme allowing to enumerate PHY devices that
belong to any netdev, which can in turn allow userspace to take more
precise decisions with regard to each PHY's configuration.
The numbering is maintained per-netdev, in a phy_device_list.
The numbering works similarly to a netdevice's ifindex, with
identifiers that are only recycled once INT_MAX has been reached.
This prevents races that could occur between PHY listing and SFP
transceiver removal/insertion.
The identifiers are assigned at phy_attach time, as the numbering
depends on the netdevice the phy is attached to. The PHY index can be
re-used for PHYs that are persistent.
Signed-off-by: Maxime Chevallier <[email protected]>
---
MAINTAINERS | 1 +
drivers/net/phy/Makefile | 2 +-
drivers/net/phy/phy_device.c | 6 ++
drivers/net/phy/phy_link_topology.c | 105 ++++++++++++++++++++++++++++
include/linux/netdevice.h | 4 +-
include/linux/phy.h | 4 ++
include/linux/phy_link_topology.h | 82 ++++++++++++++++++++++
include/uapi/linux/ethtool.h | 16 +++++
net/core/dev.c | 15 ++++
9 files changed, 233 insertions(+), 2 deletions(-)
create mode 100644 drivers/net/phy/phy_link_topology.c
create mode 100644 include/linux/phy_link_topology.h
diff --git a/MAINTAINERS b/MAINTAINERS
index cd3277a98cfe..3cad63bb49be 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8193,6 +8193,7 @@ F: include/linux/mii.h
F: include/linux/of_net.h
F: include/linux/phy.h
F: include/linux/phy_fixed.h
+F: include/linux/phy_link_topology.h
F: include/linux/phylib_stubs.h
F: include/linux/platform_data/mdio-bcm-unimac.h
F: include/linux/platform_data/mdio-gpio.h
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 202ed7f450da..1d8be374915f 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -2,7 +2,7 @@
# Makefile for Linux PHY drivers
libphy-y := phy.o phy-c45.o phy-core.o phy_device.o \
- linkmode.o
+ linkmode.o phy_link_topology.o
mdio-bus-y += mdio_bus.o mdio_device.o
ifdef CONFIG_MDIO_DEVICE
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 6c6ec9475709..439d03f5774a 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -29,6 +29,7 @@
#include <linux/phy.h>
#include <linux/phylib_stubs.h>
#include <linux/phy_led_triggers.h>
+#include <linux/phy_link_topology.h>
#include <linux/pse-pd/pse.h>
#include <linux/property.h>
#include <linux/rtnetlink.h>
@@ -1511,6 +1512,10 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
if (phydev->sfp_bus_attached)
dev->sfp_bus = phydev->sfp_bus;
+
+ err = phy_link_topo_add_phy(dev, phydev, PHY_UPSTREAM_MAC, dev);
+ if (err)
+ goto error;
}
/* Some Ethernet drivers try to connect to a PHY device before
@@ -1938,6 +1943,7 @@ void phy_detach(struct phy_device *phydev)
if (dev) {
phydev->attached_dev->phydev = NULL;
phydev->attached_dev = NULL;
+ phy_link_topo_del_phy(dev, phydev);
}
phydev->phylink = NULL;
diff --git a/drivers/net/phy/phy_link_topology.c b/drivers/net/phy/phy_link_topology.c
new file mode 100644
index 000000000000..4a5d73002a1a
--- /dev/null
+++ b/drivers/net/phy/phy_link_topology.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Infrastructure to handle all PHY devices connected to a given netdev,
+ * either directly or indirectly attached.
+ *
+ * Copyright (c) 2023 Maxime Chevallier<[email protected]>
+ */
+
+#include <linux/phy_link_topology.h>
+#include <linux/phy.h>
+#include <linux/rtnetlink.h>
+#include <linux/xarray.h>
+
+static int netdev_alloc_phy_link_topology(struct net_device *dev)
+{
+ struct phy_link_topology *topo;
+
+ topo = kzalloc(sizeof(*topo), GFP_KERNEL);
+ if (!topo)
+ return -ENOMEM;
+
+ xa_init_flags(&topo->phys, XA_FLAGS_ALLOC1);
+ topo->next_phy_index = 1;
+
+ dev->link_topo = topo;
+
+ return 0;
+}
+
+int phy_link_topo_add_phy(struct net_device *dev,
+ struct phy_device *phy,
+ enum phy_upstream upt, void *upstream)
+{
+ struct phy_link_topology *topo = dev->link_topo;
+ struct phy_device_node *pdn;
+ int ret;
+
+ if (!topo) {
+ ret = netdev_alloc_phy_link_topology(dev);
+ if (ret)
+ return ret;
+
+ topo = dev->link_topo;
+ }
+
+ pdn = kzalloc(sizeof(*pdn), GFP_KERNEL);
+ if (!pdn)
+ return -ENOMEM;
+
+ pdn->phy = phy;
+ switch (upt) {
+ case PHY_UPSTREAM_MAC:
+ pdn->upstream.netdev = (struct net_device *)upstream;
+ if (phy_on_sfp(phy))
+ pdn->parent_sfp_bus = pdn->upstream.netdev->sfp_bus;
+ break;
+ case PHY_UPSTREAM_PHY:
+ pdn->upstream.phydev = (struct phy_device *)upstream;
+ if (phy_on_sfp(phy))
+ pdn->parent_sfp_bus = pdn->upstream.phydev->sfp_bus;
+ break;
+ default:
+ ret = -EINVAL;
+ goto err;
+ }
+ pdn->upstream_type = upt;
+
+ /* Attempt to re-use a previously allocated phy_index */
+ if (phy->phyindex)
+ ret = xa_insert(&topo->phys, phy->phyindex, pdn, GFP_KERNEL);
+ else
+ ret = xa_alloc_cyclic(&topo->phys, &phy->phyindex, pdn,
+ xa_limit_32b, &topo->next_phy_index,
+ GFP_KERNEL);
+
+ if (ret)
+ goto err;
+
+ return 0;
+
+err:
+ kfree(pdn);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phy_link_topo_add_phy);
+
+void phy_link_topo_del_phy(struct net_device *dev,
+ struct phy_device *phy)
+{
+ struct phy_link_topology *topo = dev->link_topo;
+ struct phy_device_node *pdn;
+
+ if (!topo)
+ return;
+
+ pdn = xa_erase(&topo->phys, phy->phyindex);
+
+ /* We delete the PHY from the topology, however we don't re-set the
+ * phy->phyindex field. If the PHY isn't gone, we can re-assign it the
+ * same index next time it's added back to the topology
+ */
+
+ kfree(pdn);
+}
+EXPORT_SYMBOL_GPL(phy_link_topo_del_phy);
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index d20c6c99eb88..6c2077f45b9f 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -40,7 +40,6 @@
#include <net/dcbnl.h>
#endif
#include <net/netprio_cgroup.h>
-
#include <linux/netdev_features.h>
#include <linux/neighbour.h>
#include <uapi/linux/netdevice.h>
@@ -79,6 +78,7 @@ struct xdp_buff;
struct xdp_frame;
struct xdp_metadata_ops;
struct xdp_md;
+struct phy_link_topology;
typedef u32 xdp_features_t;
@@ -1975,6 +1975,7 @@ enum netdev_reg_state {
* @fcoe_ddp_xid: Max exchange id for FCoE LRO by ddp
*
* @priomap: XXX: need comments on this one
+ * @link_topo: Physical link topology tracking attached PHYs
* @phydev: Physical device may attach itself
* for hardware timestamping
* @sfp_bus: attached &struct sfp_bus structure.
@@ -2367,6 +2368,7 @@ struct net_device {
#if IS_ENABLED(CONFIG_CGROUP_NET_PRIO)
struct netprio_map __rcu *priomap;
#endif
+ struct phy_link_topology *link_topo;
struct phy_device *phydev;
struct sfp_bus *sfp_bus;
struct lock_class_key *qdisc_tx_busylock;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index e6e83304558e..8c848c79b1fd 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -550,6 +550,9 @@ struct macsec_ops;
* @drv: Pointer to the driver for this PHY instance
* @devlink: Create a link between phy dev and mac dev, if the external phy
* used by current mac interface is managed by another mac interface.
+ * @phyindex: Unique id across the phy's parent tree of phys to address the PHY
+ * from userspace, similar to ifindex. A zero index means the PHY
+ * wasn't assigned an id yet.
* @phy_id: UID for this device found during discovery
* @c45_ids: 802.3-c45 Device Identifiers if is_c45.
* @is_c45: Set to true if this PHY uses clause 45 addressing.
@@ -650,6 +653,7 @@ struct phy_device {
struct device_link *devlink;
+ u32 phyindex;
u32 phy_id;
struct phy_c45_device_ids c45_ids;
diff --git a/include/linux/phy_link_topology.h b/include/linux/phy_link_topology.h
new file mode 100644
index 000000000000..6f1569db6643
--- /dev/null
+++ b/include/linux/phy_link_topology.h
@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * PHY device list allow maintaining a list of PHY devices that are
+ * part of a netdevice's link topology. PHYs can for example be chained,
+ * as is the case when using a PHY that exposes an SFP module, on which an
+ * SFP transceiver that embeds a PHY is connected.
+ *
+ * This list can then be used by userspace to leverage individual PHY
+ * capabilities.
+ */
+#ifndef __PHY_LINK_TOPOLOGY_H
+#define __PHY_LINK_TOPOLOGY_H
+
+#include <linux/ethtool.h>
+#include <linux/netdevice.h>
+
+struct xarray;
+struct phy_device;
+struct sfp_bus;
+
+struct phy_link_topology {
+ struct xarray phys;
+ u32 next_phy_index;
+};
+
+struct phy_device_node {
+ enum phy_upstream upstream_type;
+
+ union {
+ struct net_device *netdev;
+ struct phy_device *phydev;
+ } upstream;
+
+ struct sfp_bus *parent_sfp_bus;
+
+ struct phy_device *phy;
+};
+
+#if IS_ENABLED(CONFIG_PHYLIB)
+int phy_link_topo_add_phy(struct net_device *dev,
+ struct phy_device *phy,
+ enum phy_upstream upt, void *upstream);
+
+void phy_link_topo_del_phy(struct net_device *dev, struct phy_device *phy);
+
+static inline struct phy_device
+*phy_link_topo_get_phy(struct net_device *dev, u32 phyindex)
+{
+ struct phy_link_topology *topo = dev->link_topo;
+ struct phy_device_node *pdn;
+
+ if (!topo)
+ return NULL;
+
+ pdn = xa_load(&topo->phys, phyindex);
+ if (pdn)
+ return pdn->phy;
+
+ return NULL;
+}
+
+#else
+static inline int phy_link_topo_add_phy(struct net_device *dev,
+ struct phy_device *phy,
+ enum phy_upstream upt, void *upstream)
+{
+ return 0;
+}
+
+static inline void phy_link_topo_del_phy(struct net_device *dev,
+ struct phy_device *phy)
+{
+}
+
+static inline struct phy_device *
+phy_link_topo_get_phy(struct net_device *dev, u32 phyindex)
+{
+ return NULL;
+}
+#endif
+
+#endif /* __PHY_LINK_TOPOLOGY_H */
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 8733a3117902..041e09c3515d 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -2323,4 +2323,20 @@ struct ethtool_link_settings {
* __u32 map_lp_advertising[link_mode_masks_nwords];
*/
};
+
+/**
+ * enum phy_upstream - Represents the upstream component a given PHY device
+ * is connected to, as in what is on the other end of the MII bus. Most PHYs
+ * will be attached to an Ethernet MAC controller, but in some cases, there's
+ * an intermediate PHY used as a media-converter, which will driver another
+ * MII interface as its output.
+ * @PHY_UPSTREAM_MAC: Upstream component is a MAC (a switch port,
+ * or ethernet controller)
+ * @PHY_UPSTREAM_PHY: Upstream component is a PHY (likely a media converter)
+ */
+enum phy_upstream {
+ PHY_UPSTREAM_MAC,
+ PHY_UPSTREAM_PHY,
+};
+
#endif /* _UAPI_LINUX_ETHTOOL_H */
diff --git a/net/core/dev.c b/net/core/dev.c
index e62698c7a0e6..36d4d6662af6 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -158,6 +158,7 @@
#include <net/page_pool/types.h>
#include <net/page_pool/helpers.h>
#include <net/rps.h>
+#include <linux/phy_link_topology.h>
#include "dev.h"
#include "net-sysfs.h"
@@ -10256,6 +10257,17 @@ static void netdev_do_free_pcpu_stats(struct net_device *dev)
}
}
+static void netdev_free_phy_link_topology(struct net_device *dev)
+{
+ struct phy_link_topology *topo = dev->link_topo;
+
+ if (IS_ENABLED(CONFIG_PHYLIB) && topo) {
+ xa_destroy(&topo->phys);
+ kfree(topo);
+ dev->link_topo = NULL;
+ }
+}
+
/**
* register_netdevice() - register a network device
* @dev: device to register
@@ -10998,6 +11010,7 @@ struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name,
#ifdef CONFIG_NET_SCHED
hash_init(dev->qdisc_hash);
#endif
+
dev->priv_flags = IFF_XMIT_DST_RELEASE | IFF_XMIT_DST_RELEASE_PERM;
setup(dev);
@@ -11086,6 +11099,8 @@ void free_netdev(struct net_device *dev)
free_percpu(dev->xdp_bulkq);
dev->xdp_bulkq = NULL;
+ netdev_free_phy_link_topology(dev);
+
/* Compatibility with error handling in drivers */
if (dev->reg_state == NETREG_UNINITIALIZED ||
dev->reg_state == NETREG_DUMMY) {
--
2.45.1
Some netlink commands are target towards ethernet PHYs, to control some
of their features. As there's several such commands, add the ability to
pass a PHY index in the ethnl request, which will populate the generic
ethnl_req_info with the relevant phydev when the command targets a PHY.
Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
---
Documentation/networking/ethtool-netlink.rst | 7 +++
include/uapi/linux/ethtool_netlink.h | 1 +
net/ethtool/netlink.c | 48 +++++++++++++++++++-
net/ethtool/netlink.h | 5 ++
4 files changed, 59 insertions(+), 2 deletions(-)
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index 160bfb0ae8ba..8bc71f249448 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -57,6 +57,7 @@ Structure of this header is
``ETHTOOL_A_HEADER_DEV_INDEX`` u32 device ifindex
``ETHTOOL_A_HEADER_DEV_NAME`` string device name
``ETHTOOL_A_HEADER_FLAGS`` u32 flags common for all requests
+ ``ETHTOOL_A_HEADER_PHY_INDEX`` u32 phy device index
============================== ====== =============================
``ETHTOOL_A_HEADER_DEV_INDEX`` and ``ETHTOOL_A_HEADER_DEV_NAME`` identify the
@@ -81,6 +82,12 @@ the behaviour is backward compatible, i.e. requests from old clients not aware
of the flag should be interpreted the way the client expects. A client must
not set flags it does not understand.
+``ETHTOOL_A_HEADER_PHY_INDEX`` identifies the Ethernet PHY the message relates to.
+As there are numerous commands that are related to PHY configuration, and because
+there may be more than one PHY on the link, the PHY index can be passed in the
+request for the commands that needs it. It is, however, not mandatory, and if it
+is not passed for commands that target a PHY, the net_device.phydev pointer
+is used.
Bit sets
========
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index b49b804b9495..f17dbe54bf5e 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -132,6 +132,7 @@ enum {
ETHTOOL_A_HEADER_DEV_INDEX, /* u32 */
ETHTOOL_A_HEADER_DEV_NAME, /* string */
ETHTOOL_A_HEADER_FLAGS, /* u32 - ETHTOOL_FLAG_* */
+ ETHTOOL_A_HEADER_PHY_INDEX, /* u32 */
/* add new constants above here */
__ETHTOOL_A_HEADER_CNT,
diff --git a/net/ethtool/netlink.c b/net/ethtool/netlink.c
index bd04f28d5cf4..f5b4adf324bc 100644
--- a/net/ethtool/netlink.c
+++ b/net/ethtool/netlink.c
@@ -4,6 +4,7 @@
#include <linux/ethtool_netlink.h>
#include <linux/pm_runtime.h>
#include "netlink.h"
+#include <linux/phy_link_topology.h>
static struct genl_family ethtool_genl_family;
@@ -30,6 +31,24 @@ const struct nla_policy ethnl_header_policy_stats[] = {
ETHTOOL_FLAGS_STATS),
};
+const struct nla_policy ethnl_header_policy_phy[] = {
+ [ETHTOOL_A_HEADER_DEV_INDEX] = { .type = NLA_U32 },
+ [ETHTOOL_A_HEADER_DEV_NAME] = { .type = NLA_NUL_STRING,
+ .len = ALTIFNAMSIZ - 1 },
+ [ETHTOOL_A_HEADER_FLAGS] = NLA_POLICY_MASK(NLA_U32,
+ ETHTOOL_FLAGS_BASIC),
+ [ETHTOOL_A_HEADER_PHY_INDEX] = NLA_POLICY_MIN(NLA_U32, 1),
+};
+
+const struct nla_policy ethnl_header_policy_phy_stats[] = {
+ [ETHTOOL_A_HEADER_DEV_INDEX] = { .type = NLA_U32 },
+ [ETHTOOL_A_HEADER_DEV_NAME] = { .type = NLA_NUL_STRING,
+ .len = ALTIFNAMSIZ - 1 },
+ [ETHTOOL_A_HEADER_FLAGS] = NLA_POLICY_MASK(NLA_U32,
+ ETHTOOL_FLAGS_STATS),
+ [ETHTOOL_A_HEADER_PHY_INDEX] = NLA_POLICY_MIN(NLA_U32, 1),
+};
+
int ethnl_ops_begin(struct net_device *dev)
{
int ret;
@@ -89,8 +108,9 @@ int ethnl_parse_header_dev_get(struct ethnl_req_info *req_info,
const struct nlattr *header, struct net *net,
struct netlink_ext_ack *extack, bool require_dev)
{
- struct nlattr *tb[ARRAY_SIZE(ethnl_header_policy)];
+ struct nlattr *tb[ARRAY_SIZE(ethnl_header_policy_phy)];
const struct nlattr *devname_attr;
+ struct phy_device *phydev = NULL;
struct net_device *dev = NULL;
u32 flags = 0;
int ret;
@@ -104,7 +124,7 @@ int ethnl_parse_header_dev_get(struct ethnl_req_info *req_info,
/* No validation here, command policy should have a nested policy set
* for the header, therefore validation should have already been done.
*/
- ret = nla_parse_nested(tb, ARRAY_SIZE(ethnl_header_policy) - 1, header,
+ ret = nla_parse_nested(tb, ARRAY_SIZE(ethnl_header_policy_phy) - 1, header,
NULL, extack);
if (ret < 0)
return ret;
@@ -145,6 +165,30 @@ int ethnl_parse_header_dev_get(struct ethnl_req_info *req_info,
return -EINVAL;
}
+ if (dev) {
+ if (tb[ETHTOOL_A_HEADER_PHY_INDEX]) {
+ struct nlattr *phy_id;
+
+ phy_id = tb[ETHTOOL_A_HEADER_PHY_INDEX];
+ phydev = phy_link_topo_get_phy(dev,
+ nla_get_u32(phy_id));
+ if (!phydev) {
+ NL_SET_BAD_ATTR(extack, phy_id);
+ return -ENODEV;
+ }
+ } else {
+ /* If we need a PHY but no phy index is specified, fallback
+ * to dev->phydev
+ */
+ phydev = dev->phydev;
+ }
+ } else if (tb[ETHTOOL_A_HEADER_PHY_INDEX]) {
+ NL_SET_ERR_MSG_ATTR(extack, header,
+ "can't target a PHY without a netdev");
+ return -EINVAL;
+ }
+
+ req_info->phydev = phydev;
req_info->dev = dev;
req_info->flags = flags;
return 0;
diff --git a/net/ethtool/netlink.h b/net/ethtool/netlink.h
index 9a333a8d04c1..d57a890b5d9e 100644
--- a/net/ethtool/netlink.h
+++ b/net/ethtool/netlink.h
@@ -250,6 +250,7 @@ static inline unsigned int ethnl_reply_header_size(void)
* @dev: network device the request is for (may be null)
* @dev_tracker: refcount tracker for @dev reference
* @flags: request flags common for all request types
+ * @phydev: phy_device connected to @dev this request is for (may be null)
*
* This is a common base for request specific structures holding data from
* parsed userspace request. These always embed struct ethnl_req_info at
@@ -259,6 +260,7 @@ struct ethnl_req_info {
struct net_device *dev;
netdevice_tracker dev_tracker;
u32 flags;
+ struct phy_device *phydev;
};
static inline void ethnl_parse_header_dev_put(struct ethnl_req_info *req_info)
@@ -395,9 +397,12 @@ extern const struct ethnl_request_ops ethnl_rss_request_ops;
extern const struct ethnl_request_ops ethnl_plca_cfg_request_ops;
extern const struct ethnl_request_ops ethnl_plca_status_request_ops;
extern const struct ethnl_request_ops ethnl_mm_request_ops;
+extern const struct ethnl_request_ops ethnl_phy_request_ops;
extern const struct nla_policy ethnl_header_policy[ETHTOOL_A_HEADER_FLAGS + 1];
extern const struct nla_policy ethnl_header_policy_stats[ETHTOOL_A_HEADER_FLAGS + 1];
+extern const struct nla_policy ethnl_header_policy_phy[ETHTOOL_A_HEADER_PHY_INDEX + 1];
+extern const struct nla_policy ethnl_header_policy_phy_stats[ETHTOOL_A_HEADER_PHY_INDEX + 1];
extern const struct nla_policy ethnl_strset_get_policy[ETHTOOL_A_STRSET_COUNTS_ONLY + 1];
extern const struct nla_policy ethnl_linkinfo_get_policy[ETHTOOL_A_LINKINFO_HEADER + 1];
extern const struct nla_policy ethnl_linkinfo_set_policy[ETHTOOL_A_LINKINFO_TP_MDIX_CTRL + 1];
--
2.45.1
The PHY_GET command, supporting both DUMP and GET operations, is used to
retrieve the list of PHYs connected to a netdevice, and get topology
information to know where exactly it sits on the physical link.
Add the netlink specs corresponding to that command.
Signed-off-by: Maxime Chevallier <[email protected]>
---
Documentation/netlink/specs/ethtool.yaml | 59 ++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml
index 38c2ed0da739..92a89a70ed9e 100644
--- a/Documentation/netlink/specs/ethtool.yaml
+++ b/Documentation/netlink/specs/ethtool.yaml
@@ -20,6 +20,11 @@ definitions:
name: header-flags
type: flags
entries: [ compact-bitsets, omit-reply, stats ]
+ -
+ name: phy-upstream-type
+ enum-name:
+ type: enum
+ entries: [ mac, phy ]
attribute-sets:
-
@@ -978,6 +983,38 @@ attribute-sets:
-
name: burst-tmr
type: u32
+ -
+ name: phy
+ attributes:
+ -
+ name: header
+ type: nest
+ nested-attributes: header
+ -
+ name: index
+ type: u32
+ -
+ name: drvname
+ type: string
+ -
+ name: name
+ type: string
+ -
+ name: upstream-type
+ type: u32
+ enum: phy-upstream-type
+ -
+ name: upstream-index
+ type: u32
+ -
+ name: upstream-sfp-name
+ type: string
+ -
+ name: downstream-sfp-name
+ type: string
+ -
+ name: id
+ type: u32
operations:
enum-model: directional
@@ -1733,3 +1770,25 @@ operations:
name: mm-ntf
doc: Notification for change in MAC Merge configuration.
notify: mm-get
+ -
+ name: phy-get
+ doc: Get PHY devices attached to an interface
+
+ attribute-set: phy
+
+ do: &phy-get-op
+ request:
+ attributes:
+ - header
+ reply:
+ attributes:
+ - header
+ - index
+ - drvname
+ - name
+ - upstream-type
+ - upstream-index
+ - upstream-sfp-name
+ - downstream-sfp-name
+ - id
+ dump: *phy-get-op
--
2.45.1
PLCA is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted PHY.
Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
---
net/ethtool/plca.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
diff --git a/net/ethtool/plca.c b/net/ethtool/plca.c
index b1e2e3b5027f..43b31a4a164e 100644
--- a/net/ethtool/plca.c
+++ b/net/ethtool/plca.c
@@ -25,7 +25,7 @@ struct plca_reply_data {
const struct nla_policy ethnl_plca_get_cfg_policy[] = {
[ETHTOOL_A_PLCA_HEADER] =
- NLA_POLICY_NESTED(ethnl_header_policy),
+ NLA_POLICY_NESTED(ethnl_header_policy_phy),
};
static void plca_update_sint(int *dst, struct nlattr **tb, u32 attrid,
@@ -61,7 +61,7 @@ static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base,
int ret;
// check that the PHY device is available and connected
- if (!dev->phydev) {
+ if (!req_base->phydev) {
ret = -EOPNOTSUPP;
goto out;
}
@@ -80,7 +80,7 @@ static int plca_get_cfg_prepare_data(const struct ethnl_req_info *req_base,
memset(&data->plca_cfg, 0xff,
sizeof_field(struct plca_reply_data, plca_cfg));
- ret = ops->get_plca_cfg(dev->phydev, &data->plca_cfg);
+ ret = ops->get_plca_cfg(req_base->phydev, &data->plca_cfg);
ethnl_ops_complete(dev);
out:
@@ -129,7 +129,7 @@ static int plca_get_cfg_fill_reply(struct sk_buff *skb,
const struct nla_policy ethnl_plca_set_cfg_policy[] = {
[ETHTOOL_A_PLCA_HEADER] =
- NLA_POLICY_NESTED(ethnl_header_policy),
+ NLA_POLICY_NESTED(ethnl_header_policy_phy),
[ETHTOOL_A_PLCA_ENABLED] = NLA_POLICY_MAX(NLA_U8, 1),
[ETHTOOL_A_PLCA_NODE_ID] = NLA_POLICY_MAX(NLA_U32, 255),
[ETHTOOL_A_PLCA_NODE_CNT] = NLA_POLICY_RANGE(NLA_U32, 1, 255),
@@ -141,7 +141,6 @@ const struct nla_policy ethnl_plca_set_cfg_policy[] = {
static int
ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info)
{
- struct net_device *dev = req_info->dev;
const struct ethtool_phy_ops *ops;
struct nlattr **tb = info->attrs;
struct phy_plca_cfg plca_cfg;
@@ -149,7 +148,7 @@ ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info)
int ret;
// check that the PHY device is available and connected
- if (!dev->phydev)
+ if (!req_info->phydev)
return -EOPNOTSUPP;
ops = ethtool_phy_ops;
@@ -168,7 +167,7 @@ ethnl_set_plca(struct ethnl_req_info *req_info, struct genl_info *info)
if (!mod)
return 0;
- ret = ops->set_plca_cfg(dev->phydev, &plca_cfg, info->extack);
+ ret = ops->set_plca_cfg(req_info->phydev, &plca_cfg, info->extack);
return ret < 0 ? ret : 1;
}
@@ -191,7 +190,7 @@ const struct ethnl_request_ops ethnl_plca_cfg_request_ops = {
const struct nla_policy ethnl_plca_get_status_policy[] = {
[ETHTOOL_A_PLCA_HEADER] =
- NLA_POLICY_NESTED(ethnl_header_policy),
+ NLA_POLICY_NESTED(ethnl_header_policy_phy),
};
static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base,
@@ -204,7 +203,7 @@ static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base,
int ret;
// check that the PHY device is available and connected
- if (!dev->phydev) {
+ if (!req_base->phydev) {
ret = -EOPNOTSUPP;
goto out;
}
@@ -223,7 +222,7 @@ static int plca_get_status_prepare_data(const struct ethnl_req_info *req_base,
memset(&data->plca_st, 0xff,
sizeof_field(struct plca_reply_data, plca_st));
- ret = ops->get_plca_status(dev->phydev, &data->plca_st);
+ ret = ops->get_plca_status(req_base->phydev, &data->plca_st);
ethnl_ops_complete(dev);
out:
return ret;
--
2.45.1
Cable testing is a PHY-specific command. Instead of targeting the command
towards dev->phydev, use the request to pick the targeted PHY.
Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
---
net/ethtool/cabletest.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/net/ethtool/cabletest.c b/net/ethtool/cabletest.c
index f6f136ec7ddf..73dd4c439a3d 100644
--- a/net/ethtool/cabletest.c
+++ b/net/ethtool/cabletest.c
@@ -13,7 +13,7 @@
const struct nla_policy ethnl_cable_test_act_policy[] = {
[ETHTOOL_A_CABLE_TEST_HEADER] =
- NLA_POLICY_NESTED(ethnl_header_policy),
+ NLA_POLICY_NESTED(ethnl_header_policy_phy),
};
static int ethnl_cable_test_started(struct phy_device *phydev, u8 cmd)
@@ -69,7 +69,7 @@ int ethnl_act_cable_test(struct sk_buff *skb, struct genl_info *info)
return ret;
dev = req_info.dev;
- if (!dev->phydev) {
+ if (!req_info.phydev) {
ret = -EOPNOTSUPP;
goto out_dev_put;
}
@@ -85,12 +85,12 @@ int ethnl_act_cable_test(struct sk_buff *skb, struct genl_info *info)
if (ret < 0)
goto out_rtnl;
- ret = ops->start_cable_test(dev->phydev, info->extack);
+ ret = ops->start_cable_test(req_info.phydev, info->extack);
ethnl_ops_complete(dev);
if (!ret)
- ethnl_cable_test_started(dev->phydev,
+ ethnl_cable_test_started(req_info.phydev,
ETHTOOL_MSG_CABLE_TEST_NTF);
out_rtnl:
@@ -216,7 +216,7 @@ static const struct nla_policy cable_test_tdr_act_cfg_policy[] = {
const struct nla_policy ethnl_cable_test_tdr_act_policy[] = {
[ETHTOOL_A_CABLE_TEST_TDR_HEADER] =
- NLA_POLICY_NESTED(ethnl_header_policy),
+ NLA_POLICY_NESTED(ethnl_header_policy_phy),
[ETHTOOL_A_CABLE_TEST_TDR_CFG] = { .type = NLA_NESTED },
};
@@ -317,7 +317,7 @@ int ethnl_act_cable_test_tdr(struct sk_buff *skb, struct genl_info *info)
return ret;
dev = req_info.dev;
- if (!dev->phydev) {
+ if (!req_info.phydev) {
ret = -EOPNOTSUPP;
goto out_dev_put;
}
@@ -338,12 +338,12 @@ int ethnl_act_cable_test_tdr(struct sk_buff *skb, struct genl_info *info)
if (ret < 0)
goto out_rtnl;
- ret = ops->start_cable_test_tdr(dev->phydev, info->extack, &cfg);
+ ret = ops->start_cable_test_tdr(req_info.phydev, info->extack, &cfg);
ethnl_ops_complete(dev);
if (!ret)
- ethnl_cable_test_started(dev->phydev,
+ ethnl_cable_test_started(req_info.phydev,
ETHTOOL_MSG_CABLE_TEST_TDR_NTF);
out_rtnl:
--
2.45.1
The newly introduced phy_link_topology tracks all ethernet PHYs that are
attached to a netdevice. Document the base principle, internal and
external APIs. As the phy_link_topology is expected to be extended, this
documentation will hold any further improvements and additions made
relative to topology handling.
Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
---
Documentation/networking/ethtool-netlink.rst | 3 +
Documentation/networking/index.rst | 1 +
.../networking/phy-link-topology.rst | 121 ++++++++++++++++++
3 files changed, 125 insertions(+)
create mode 100644 Documentation/networking/phy-link-topology.rst
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index dedda1ccf5a3..d16e6a5d0a1c 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -2047,10 +2047,13 @@ Retrieve information about a given Ethernet PHY sitting on the link. The DO
operation returns all available information about dev->phydev. User can also
specify a PHY_INDEX, in which case the DO request returns information about that
specific PHY.
+
As there can be more than one PHY, the DUMP operation can be used to list the PHYs
present on a given interface, by passing an interface index or name in
the dump request.
+For more information, refer to :ref:`phy_link_topology`
+
Request contents:
==================================== ====== ==========================
diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst
index a6443851a142..51e70b0a81c8 100644
--- a/Documentation/networking/index.rst
+++ b/Documentation/networking/index.rst
@@ -90,6 +90,7 @@ Contents:
operstates
packet_mmap
phonet
+ phy-link-topology
pktgen
plip
ppp_generic
diff --git a/Documentation/networking/phy-link-topology.rst b/Documentation/networking/phy-link-topology.rst
new file mode 100644
index 000000000000..4dec5d7d6513
--- /dev/null
+++ b/Documentation/networking/phy-link-topology.rst
@@ -0,0 +1,121 @@
+.. SPDX-License-Identifier: GPL-2.0
+.. _phy_link_topology:
+
+=================
+PHY link topology
+=================
+
+Overview
+========
+
+The PHY link topology representation in the networking stack aims at representing
+the hardware layout for any given Ethernet link.
+
+An Ethernet interface from userspace's point of view is nothing but a
+:c:type:`struct net_device <net_device>`, which exposes configuration options
+through the legacy ioctls and the ethtool netlink commands. The base assumption
+when designing these configuration APIs were that the link looks something like ::
+
+ +-----------------------+ +----------+ +--------------+
+ | Ethernet Controller / | | Ethernet | | Connector / |
+ | MAC | ------ | PHY | ---- | Port | ---... to LP
+ +-----------------------+ +----------+ +--------------+
+ struct net_device struct phy_device
+
+Commands that needs to configure the PHY will go through the net_device.phydev
+field to reach the PHY and perform the relevant configuration.
+
+This assumption falls apart in more complex topologies that can arise when,
+for example, using SFP transceivers (although that's not the only specific case).
+
+Here, we have 2 basic scenarios. Either the MAC is able to output a serialized
+interface, that can directly be fed to an SFP cage, such as SGMII, 1000BaseX,
+10GBaseR, etc.
+
+The link topology then looks like this (when an SFP module is inserted) ::
+
+ +-----+ SGMII +------------+
+ | MAC | ------- | SFP Module |
+ +-----+ +------------+
+
+Knowing that some modules embed a PHY, the actual link is more like ::
+
+ +-----+ SGMII +--------------+
+ | MAC | -------- | PHY (on SFP) |
+ +-----+ +--------------+
+
+In this case, the SFP PHY is handled by phylib, and registered by phylink through
+its SFP upstream ops.
+
+Now some Ethernet controllers aren't able to output a serialized interface, so
+we can't directly connect them to an SFP cage. However, some PHYs can be used
+as media-converters, to translate the non-serialized MAC MII interface to a
+serialized MII interface fed to the SFP ::
+
+ +-----+ RGMII +-----------------------+ SGMII +--------------+
+ | MAC | ------- | PHY (media converter) | ------- | PHY (on SFP) |
+ +-----+ +-----------------------+ +--------------+
+
+This is where the model of having a single net_device.phydev pointer shows its
+limitations, as we now have 2 PHYs on the link.
+
+The phy_link topology framework aims at providing a way to keep track of every
+PHY on the link, for use by both kernel drivers and subsystems, but also to
+report the topology to userspace, allowing to target individual PHYs in configuration
+commands.
+
+API
+===
+
+The :c:type:`struct phy_link_topology <phy_link_topology>` is a per-netdevice
+resource, that gets initialized at netdevice creation. Once it's initialized,
+it is then possible to register PHYs to the topology through :
+
+:c:func:`phy_link_topo_add_phy`
+
+Besides registering the PHY to the topology, this call will also assign a unique
+index to the PHY, which can then be reported to userspace to refer to this PHY
+(akin to the ifindex). This index is a u32, ranging from 1 to U32_MAX. The value
+0 is reserved to indicate the PHY doesn't belong to any topology yet.
+
+The PHY can then be removed from the topology through
+
+:c:func:`phy_link_topo_del_phy`
+
+These function are already hooked into the phylib subsystem, so all PHYs that
+are linked to a net_device through :c:func:`phy_attach_direct` will automatically
+join the netdev's topology.
+
+PHYs that are on a SFP module will also be automatically registered IF the SFP
+upstream is phylink (so, no media-converter).
+
+PHY drivers that can be used as SFP upstream need to call :c:func:`phy_sfp_attach_phy`
+and :c:func:`phy_sfp_detach_phy`, which can be used as a
+.attach_phy / .detach_phy implementation for the
+:c:type:`struct sfp_upstream_ops <sfp_upstream_ops>`.
+
+UAPI
+====
+
+There exist a set of netlink commands to query the link topology from userspace,
+see ``Documentation/networking/ethtool-netlink.rst``.
+
+The whole point of having a topology representation is to assign the phyindex
+field in :c:type:`struct phy_device <phy_device>`. This index is reported to
+userspace using the ``ETHTOOL_MSG_PHY_GET`` ethtnl command. Performing a DUMP operation
+will result in all PHYs from all net_device being listed. The DUMP command
+accepts either a ``ETHTOOL_A_HEADER_DEV_INDEX`` or ``ETHTOOL_A_HEADER_DEV_NAME``
+to be passed in the request to filter the DUMP to a single net_device.
+
+The retrieved index can then be passed as a request parameter using the
+``ETHTOOL_A_HEADER_PHY_INDEX`` field in the following ethnl commands :
+
+* ``ETHTOOL_MSG_STRSET_GET`` to get the stats string set from a given PHY
+* ``ETHTOOL_MSG_CABLE_TEST_ACT`` and ``ETHTOOL_MSG_CABLE_TEST_ACT``, to perform
+ cable testing on a given PHY on the link (most likely the outermost PHY)
+* ``ETHTOOL_MSG_PSE_SET`` and ``ETHTOOL_MSG_PSE_GET`` for PHY-controlled PoE and PSE settings
+* ``ETHTOOL_MSG_PLCA_GET_CFG``, ``ETHTOOL_MSG_PLCA_SET_CFG`` and ``ETHTOOL_MSG_PLCA_GET_STATUS``
+ to set the PLCA (Physical Layer Collision Avoidance) parameters
+
+Note that the PHY index can be passed to other requests, which will silently
+ignore it if present and irrelevant.
--
2.45.1
Knowing the bus name is helpful when we want to expose the link topology
to userspace, add a helper to return the SFP bus name.
Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
---
drivers/net/phy/sfp-bus.c | 11 +++++++++++
include/linux/sfp.h | 6 ++++++
2 files changed, 17 insertions(+)
diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
index 56953e66bb7b..37c85f1e6534 100644
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -860,3 +860,14 @@ void sfp_unregister_socket(struct sfp_bus *bus)
sfp_bus_put(bus);
}
EXPORT_SYMBOL_GPL(sfp_unregister_socket);
+
+const char *sfp_get_name(struct sfp_bus *bus)
+{
+ ASSERT_RTNL();
+
+ if (bus->sfp_dev)
+ return dev_name(bus->sfp_dev);
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(sfp_get_name);
diff --git a/include/linux/sfp.h b/include/linux/sfp.h
index 0de85cadfa7c..5ebc57f78c95 100644
--- a/include/linux/sfp.h
+++ b/include/linux/sfp.h
@@ -570,6 +570,7 @@ struct sfp_bus *sfp_bus_find_fwnode(const struct fwnode_handle *fwnode);
int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
const struct sfp_upstream_ops *ops);
void sfp_bus_del_upstream(struct sfp_bus *bus);
+const char *sfp_get_name(struct sfp_bus *bus);
#else
static inline int sfp_parse_port(struct sfp_bus *bus,
const struct sfp_eeprom_id *id,
@@ -648,6 +649,11 @@ static inline int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
static inline void sfp_bus_del_upstream(struct sfp_bus *bus)
{
}
+
+static inline const char *sfp_get_name(struct sfp_bus *bus)
+{
+ return NULL;
+}
#endif
#endif
--
2.45.1
Pass the phy_device as a parameter to the sfp upstream .disconnect_phy
operation. This is preparatory work to help track phy devices across
a net_device's link.
Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
---
drivers/net/phy/phylink.c | 3 ++-
drivers/net/phy/sfp-bus.c | 4 ++--
include/linux/sfp.h | 2 +-
3 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 02427378acfd..6468f2676a52 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -3416,7 +3416,8 @@ static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
return ret;
}
-static void phylink_sfp_disconnect_phy(void *upstream)
+static void phylink_sfp_disconnect_phy(void *upstream,
+ struct phy_device *phydev)
{
phylink_disconnect_phy(upstream);
}
diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
index 2f44fc51848f..56953e66bb7b 100644
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -487,7 +487,7 @@ static void sfp_unregister_bus(struct sfp_bus *bus)
bus->socket_ops->stop(bus->sfp);
bus->socket_ops->detach(bus->sfp);
if (bus->phydev && ops && ops->disconnect_phy)
- ops->disconnect_phy(bus->upstream);
+ ops->disconnect_phy(bus->upstream, bus->phydev);
}
bus->registered = false;
}
@@ -743,7 +743,7 @@ void sfp_remove_phy(struct sfp_bus *bus)
const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
if (ops && ops->disconnect_phy)
- ops->disconnect_phy(bus->upstream);
+ ops->disconnect_phy(bus->upstream, bus->phydev);
bus->phydev = NULL;
}
EXPORT_SYMBOL_GPL(sfp_remove_phy);
diff --git a/include/linux/sfp.h b/include/linux/sfp.h
index a45da7eef9a2..0de85cadfa7c 100644
--- a/include/linux/sfp.h
+++ b/include/linux/sfp.h
@@ -544,7 +544,7 @@ struct sfp_upstream_ops {
void (*link_down)(void *priv);
void (*link_up)(void *priv);
int (*connect_phy)(void *priv, struct phy_device *);
- void (*disconnect_phy)(void *priv);
+ void (*disconnect_phy)(void *priv, struct phy_device *);
};
#if IS_ENABLED(CONFIG_SFP)
--
2.45.1
The ETH_SS_PHY_STATS command gets PHY statistics. Use the phydev pointer
from the ethnl request to allow query phy stats from each PHY on the
link.
Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
---
net/ethtool/strset.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/net/ethtool/strset.c b/net/ethtool/strset.c
index c678b484a079..edc826407564 100644
--- a/net/ethtool/strset.c
+++ b/net/ethtool/strset.c
@@ -126,7 +126,7 @@ struct strset_reply_data {
const struct nla_policy ethnl_strset_get_policy[] = {
[ETHTOOL_A_STRSET_HEADER] =
- NLA_POLICY_NESTED(ethnl_header_policy),
+ NLA_POLICY_NESTED(ethnl_header_policy_phy),
[ETHTOOL_A_STRSET_STRINGSETS] = { .type = NLA_NESTED },
[ETHTOOL_A_STRSET_COUNTS_ONLY] = { .type = NLA_FLAG },
};
@@ -233,17 +233,18 @@ static void strset_cleanup_data(struct ethnl_reply_data *reply_base)
}
static int strset_prepare_set(struct strset_info *info, struct net_device *dev,
- unsigned int id, bool counts_only)
+ struct phy_device *phydev, unsigned int id,
+ bool counts_only)
{
const struct ethtool_phy_ops *phy_ops = ethtool_phy_ops;
const struct ethtool_ops *ops = dev->ethtool_ops;
void *strings;
int count, ret;
- if (id == ETH_SS_PHY_STATS && dev->phydev &&
+ if (id == ETH_SS_PHY_STATS && phydev &&
!ops->get_ethtool_phy_stats && phy_ops &&
phy_ops->get_sset_count)
- ret = phy_ops->get_sset_count(dev->phydev);
+ ret = phy_ops->get_sset_count(phydev);
else if (ops->get_sset_count && ops->get_strings)
ret = ops->get_sset_count(dev, id);
else
@@ -258,10 +259,10 @@ static int strset_prepare_set(struct strset_info *info, struct net_device *dev,
strings = kcalloc(count, ETH_GSTRING_LEN, GFP_KERNEL);
if (!strings)
return -ENOMEM;
- if (id == ETH_SS_PHY_STATS && dev->phydev &&
+ if (id == ETH_SS_PHY_STATS && phydev &&
!ops->get_ethtool_phy_stats && phy_ops &&
phy_ops->get_strings)
- phy_ops->get_strings(dev->phydev, strings);
+ phy_ops->get_strings(phydev, strings);
else
ops->get_strings(dev, id, strings);
info->strings = strings;
@@ -305,8 +306,8 @@ static int strset_prepare_data(const struct ethnl_req_info *req_base,
!data->sets[i].per_dev)
continue;
- ret = strset_prepare_set(&data->sets[i], dev, i,
- req_info->counts_only);
+ ret = strset_prepare_set(&data->sets[i], dev, req_base->phydev,
+ i, req_info->counts_only);
if (ret < 0)
goto err_ops;
}
--
2.45.1
There are a few PHY drivers that can handle SFP modules through their
sfp_upstream_ops. Introduce Phylib helpers to keep track of connected
SFP PHYs in a netdevice's namespace, by adding the SFP PHY to the
upstream PHY's netdev's namespace.
By doing so, these SFP PHYs can be enumerated and exposed to users,
which will be able to use their capabilities.
Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
---
drivers/net/phy/marvell-88x2222.c | 2 ++
drivers/net/phy/marvell.c | 2 ++
drivers/net/phy/marvell10g.c | 2 ++
drivers/net/phy/phy_device.c | 42 +++++++++++++++++++++++++++++++
drivers/net/phy/qcom/at803x.c | 2 ++
drivers/net/phy/qcom/qca807x.c | 2 ++
include/linux/phy.h | 2 ++
7 files changed, 54 insertions(+)
diff --git a/drivers/net/phy/marvell-88x2222.c b/drivers/net/phy/marvell-88x2222.c
index b88398e6872b..0b777cdd7078 100644
--- a/drivers/net/phy/marvell-88x2222.c
+++ b/drivers/net/phy/marvell-88x2222.c
@@ -553,6 +553,8 @@ static const struct sfp_upstream_ops sfp_phy_ops = {
.link_down = mv2222_sfp_link_down,
.attach = phy_sfp_attach,
.detach = phy_sfp_detach,
+ .connect_phy = phy_sfp_connect_phy,
+ .disconnect_phy = phy_sfp_disconnect_phy,
};
static int mv2222_probe(struct phy_device *phydev)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index b89fbffa6a93..9964bf3dea2f 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -3613,6 +3613,8 @@ static const struct sfp_upstream_ops m88e1510_sfp_ops = {
.module_remove = m88e1510_sfp_remove,
.attach = phy_sfp_attach,
.detach = phy_sfp_detach,
+ .connect_phy = phy_sfp_connect_phy,
+ .disconnect_phy = phy_sfp_disconnect_phy,
};
static int m88e1510_probe(struct phy_device *phydev)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index ad43e280930c..6642eb642d4b 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -503,6 +503,8 @@ static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
static const struct sfp_upstream_ops mv3310_sfp_ops = {
.attach = phy_sfp_attach,
.detach = phy_sfp_detach,
+ .connect_phy = phy_sfp_connect_phy,
+ .disconnect_phy = phy_sfp_disconnect_phy,
.module_insert = mv3310_sfp_insert,
};
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 439d03f5774a..6e0667f7f26f 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1370,6 +1370,48 @@ phy_standalone_show(struct device *dev, struct device_attribute *attr,
}
static DEVICE_ATTR_RO(phy_standalone);
+/**
+ * phy_sfp_connect_phy - Connect the SFP module's PHY to the upstream PHY
+ * @upstream: pointer to the upstream phy device
+ * @phy: pointer to the SFP module's phy device
+ *
+ * This helper allows keeping track of PHY devices on the link. It adds the
+ * SFP module's phy to the phy namespace of the upstream phy
+ *
+ * Return: 0 on success, otherwise a negative error code.
+ */
+int phy_sfp_connect_phy(void *upstream, struct phy_device *phy)
+{
+ struct phy_device *phydev = upstream;
+ struct net_device *dev = phydev->attached_dev;
+
+ if (dev)
+ return phy_link_topo_add_phy(dev, phy, PHY_UPSTREAM_PHY, phydev);
+
+ return 0;
+}
+EXPORT_SYMBOL(phy_sfp_connect_phy);
+
+/**
+ * phy_sfp_disconnect_phy - Disconnect the SFP module's PHY from the upstream PHY
+ * @upstream: pointer to the upstream phy device
+ * @phy: pointer to the SFP module's phy device
+ *
+ * This helper allows keeping track of PHY devices on the link. It removes the
+ * SFP module's phy to the phy namespace of the upstream phy. As the module phy
+ * will be destroyed, re-inserting the same module will add a new phy with a
+ * new index.
+ */
+void phy_sfp_disconnect_phy(void *upstream, struct phy_device *phy)
+{
+ struct phy_device *phydev = upstream;
+ struct net_device *dev = phydev->attached_dev;
+
+ if (dev)
+ phy_link_topo_del_phy(dev, phy);
+}
+EXPORT_SYMBOL(phy_sfp_disconnect_phy);
+
/**
* phy_sfp_attach - attach the SFP bus to the PHY upstream network device
* @upstream: pointer to the phy device
diff --git a/drivers/net/phy/qcom/at803x.c b/drivers/net/phy/qcom/at803x.c
index c8f83e5f78ab..105602581a03 100644
--- a/drivers/net/phy/qcom/at803x.c
+++ b/drivers/net/phy/qcom/at803x.c
@@ -770,6 +770,8 @@ static const struct sfp_upstream_ops at8031_sfp_ops = {
.attach = phy_sfp_attach,
.detach = phy_sfp_detach,
.module_insert = at8031_sfp_insert,
+ .connect_phy = phy_sfp_connect_phy,
+ .disconnect_phy = phy_sfp_disconnect_phy,
};
static int at8031_parse_dt(struct phy_device *phydev)
diff --git a/drivers/net/phy/qcom/qca807x.c b/drivers/net/phy/qcom/qca807x.c
index 672c6929119a..5eb0ab1cb70e 100644
--- a/drivers/net/phy/qcom/qca807x.c
+++ b/drivers/net/phy/qcom/qca807x.c
@@ -699,6 +699,8 @@ static const struct sfp_upstream_ops qca807x_sfp_ops = {
.detach = phy_sfp_detach,
.module_insert = qca807x_sfp_insert,
.module_remove = qca807x_sfp_remove,
+ .connect_phy = phy_sfp_connect_phy,
+ .disconnect_phy = phy_sfp_disconnect_phy,
};
static int qca807x_probe(struct phy_device *phydev)
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 8c848c79b1fd..3ddfe7fe781a 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1758,6 +1758,8 @@ int phy_suspend(struct phy_device *phydev);
int phy_resume(struct phy_device *phydev);
int __phy_resume(struct phy_device *phydev);
int phy_loopback(struct phy_device *phydev, bool enable);
+int phy_sfp_connect_phy(void *upstream, struct phy_device *phy);
+void phy_sfp_disconnect_phy(void *upstream, struct phy_device *phy);
void phy_sfp_attach(void *upstream, struct sfp_bus *bus);
void phy_sfp_detach(void *upstream, struct sfp_bus *bus);
int phy_sfp_probe(struct phy_device *phydev,
--
2.45.1
Update the spec to take the newly introduced phy-index as a generic
request parameter.
Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
---
Documentation/netlink/specs/ethtool.yaml | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml
index 00dc61358be8..38c2ed0da739 100644
--- a/Documentation/netlink/specs/ethtool.yaml
+++ b/Documentation/netlink/specs/ethtool.yaml
@@ -35,6 +35,9 @@ attribute-sets:
name: flags
type: u32
enum: header-flags
+ -
+ name: phy-index
+ type: u32
-
name: bitset-bit
--
2.45.1
As we have the ability to track the PHYs connected to a net_device
through the link_topology, we can expose this list to userspace. This
allows userspace to use these identifiers for phy-specific commands and
take the decision of which PHY to target by knowing the link topology.
Add PHY_GET and PHY_DUMP, which can be a filtered DUMP operation to list
devices on only one interface.
Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
---
Documentation/networking/ethtool-netlink.rst | 42 +++
include/uapi/linux/ethtool_netlink.h | 20 ++
net/ethtool/Makefile | 2 +-
net/ethtool/netlink.c | 9 +
net/ethtool/netlink.h | 5 +
net/ethtool/phy.c | 306 +++++++++++++++++++
6 files changed, 383 insertions(+), 1 deletion(-)
create mode 100644 net/ethtool/phy.c
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index 8bc71f249448..dedda1ccf5a3 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -2040,6 +2040,47 @@ The attributes are propagated to the driver through the following structure:
.. kernel-doc:: include/linux/ethtool.h
:identifiers: ethtool_mm_cfg
+PHY_GET
+=======
+
+Retrieve information about a given Ethernet PHY sitting on the link. The DO
+operation returns all available information about dev->phydev. User can also
+specify a PHY_INDEX, in which case the DO request returns information about that
+specific PHY.
+As there can be more than one PHY, the DUMP operation can be used to list the PHYs
+present on a given interface, by passing an interface index or name in
+the dump request.
+
+Request contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_PHY_HEADER`` nested request header
+ ==================================== ====== ==========================
+
+Kernel response contents:
+
+ ===================================== ====== ===============================
+ ``ETHTOOL_A_PHY_HEADER`` nested request header
+ ``ETHTOOL_A_PHY_INDEX`` u32 the phy's unique index, that can
+ be used for phy-specific
+ requests
+ ``ETHTOOL_A_PHY_DRVNAME`` string the phy driver name
+ ``ETHTOOL_A_PHY_NAME`` string the phy device name
+ ``ETHTOOL_A_PHY_UPSTREAM_TYPE`` u32 the type of device this phy is
+ connected to
+ ``ETHTOOL_A_PHY_UPSTREAM_INDEX`` u32 the PHY index of the upstream
+ PHY
+ ``ETHTOOL_A_PHY_UPSTREAM_SFP_NAME`` string if this PHY is connected to
+ it's parent PHY through an SFP
+ bus, the name of this sfp bus
+ ``ETHTOOL_A_PHY_DOWNSTREAM_SFP_NAME`` string if the phy controls an sfp bus,
+ the name of the sfp bus
+ ``ETHTOOL_A_PHY_ID`` u32 the phy id if the phy is C22
+ ===================================== ====== ===============================
+
+When ``ETHTOOL_A_PHY_UPSTREAM_TYPE`` is PHY_UPSTREAM_PHY, the PHY's parent is
+another PHY.
+
Request translation
===================
@@ -2146,4 +2187,5 @@ are netlink only.
n/a ``ETHTOOL_MSG_PLCA_GET_STATUS``
n/a ``ETHTOOL_MSG_MM_GET``
n/a ``ETHTOOL_MSG_MM_SET``
+ n/a ``ETHTOOL_MSG_PHY_GET``
=================================== =====================================
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index f17dbe54bf5e..275a925f32c2 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -57,6 +57,7 @@ enum {
ETHTOOL_MSG_PLCA_GET_STATUS,
ETHTOOL_MSG_MM_GET,
ETHTOOL_MSG_MM_SET,
+ ETHTOOL_MSG_PHY_GET,
/* add new constants above here */
__ETHTOOL_MSG_USER_CNT,
@@ -109,6 +110,8 @@ enum {
ETHTOOL_MSG_PLCA_NTF,
ETHTOOL_MSG_MM_GET_REPLY,
ETHTOOL_MSG_MM_NTF,
+ ETHTOOL_MSG_PHY_GET_REPLY,
+ ETHTOOL_MSG_PHY_NTF,
/* add new constants above here */
__ETHTOOL_MSG_KERNEL_CNT,
@@ -997,6 +1000,23 @@ enum {
ETHTOOL_A_MM_MAX = (__ETHTOOL_A_MM_CNT - 1)
};
+enum {
+ ETHTOOL_A_PHY_UNSPEC,
+ ETHTOOL_A_PHY_HEADER, /* nest - _A_HEADER_* */
+ ETHTOOL_A_PHY_INDEX, /* u32 */
+ ETHTOOL_A_PHY_DRVNAME, /* string */
+ ETHTOOL_A_PHY_NAME, /* string */
+ ETHTOOL_A_PHY_UPSTREAM_TYPE, /* u32 */
+ ETHTOOL_A_PHY_UPSTREAM_INDEX, /* u32 */
+ ETHTOOL_A_PHY_UPSTREAM_SFP_NAME, /* string */
+ ETHTOOL_A_PHY_DOWNSTREAM_SFP_NAME, /* string */
+ ETHTOOL_A_PHY_ID, /* u32 */
+
+ /* add new constants above here */
+ __ETHTOOL_A_PHY_CNT,
+ ETHTOOL_A_PHY_MAX = (__ETHTOOL_A_PHY_CNT - 1)
+};
+
/* generic netlink info */
#define ETHTOOL_GENL_NAME "ethtool"
#define ETHTOOL_GENL_VERSION 1
diff --git a/net/ethtool/Makefile b/net/ethtool/Makefile
index 504f954a1b28..0ccd0e9afd3f 100644
--- a/net/ethtool/Makefile
+++ b/net/ethtool/Makefile
@@ -8,4 +8,4 @@ ethtool_nl-y := netlink.o bitset.o strset.o linkinfo.o linkmodes.o rss.o \
linkstate.o debug.o wol.o features.o privflags.o rings.o \
channels.o coalesce.o pause.o eee.o tsinfo.o cabletest.o \
tunnels.o fec.o eeprom.o stats.o phc_vclocks.o mm.o \
- module.o pse-pd.o plca.o mm.o
+ module.o pse-pd.o plca.o mm.o phy.o
diff --git a/net/ethtool/netlink.c b/net/ethtool/netlink.c
index f5b4adf324bc..23e2a0afaaa1 100644
--- a/net/ethtool/netlink.c
+++ b/net/ethtool/netlink.c
@@ -1169,6 +1169,15 @@ static const struct genl_ops ethtool_genl_ops[] = {
.policy = ethnl_mm_set_policy,
.maxattr = ARRAY_SIZE(ethnl_mm_set_policy) - 1,
},
+ {
+ .cmd = ETHTOOL_MSG_PHY_GET,
+ .doit = ethnl_phy_doit,
+ .start = ethnl_phy_start,
+ .dumpit = ethnl_phy_dumpit,
+ .done = ethnl_phy_done,
+ .policy = ethnl_phy_get_policy,
+ .maxattr = ARRAY_SIZE(ethnl_phy_get_policy) - 1,
+ },
};
static const struct genl_multicast_group ethtool_nl_mcgrps[] = {
diff --git a/net/ethtool/netlink.h b/net/ethtool/netlink.h
index d57a890b5d9e..0e71b53bdb1c 100644
--- a/net/ethtool/netlink.h
+++ b/net/ethtool/netlink.h
@@ -446,6 +446,7 @@ extern const struct nla_policy ethnl_plca_set_cfg_policy[ETHTOOL_A_PLCA_MAX + 1]
extern const struct nla_policy ethnl_plca_get_status_policy[ETHTOOL_A_PLCA_HEADER + 1];
extern const struct nla_policy ethnl_mm_get_policy[ETHTOOL_A_MM_HEADER + 1];
extern const struct nla_policy ethnl_mm_set_policy[ETHTOOL_A_MM_MAX + 1];
+extern const struct nla_policy ethnl_phy_get_policy[ETHTOOL_A_PHY_HEADER + 1];
int ethnl_set_features(struct sk_buff *skb, struct genl_info *info);
int ethnl_act_cable_test(struct sk_buff *skb, struct genl_info *info);
@@ -453,6 +454,10 @@ int ethnl_act_cable_test_tdr(struct sk_buff *skb, struct genl_info *info);
int ethnl_tunnel_info_doit(struct sk_buff *skb, struct genl_info *info);
int ethnl_tunnel_info_start(struct netlink_callback *cb);
int ethnl_tunnel_info_dumpit(struct sk_buff *skb, struct netlink_callback *cb);
+int ethnl_phy_start(struct netlink_callback *cb);
+int ethnl_phy_doit(struct sk_buff *skb, struct genl_info *info);
+int ethnl_phy_dumpit(struct sk_buff *skb, struct netlink_callback *cb);
+int ethnl_phy_done(struct netlink_callback *cb);
extern const char stats_std_names[__ETHTOOL_STATS_CNT][ETH_GSTRING_LEN];
extern const char stats_eth_phy_names[__ETHTOOL_A_STATS_ETH_PHY_CNT][ETH_GSTRING_LEN];
diff --git a/net/ethtool/phy.c b/net/ethtool/phy.c
new file mode 100644
index 000000000000..7f1da6e6be81
--- /dev/null
+++ b/net/ethtool/phy.c
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2023 Bootlin
+ *
+ */
+#include "common.h"
+#include "netlink.h"
+
+#include <linux/phy.h>
+#include <linux/phy_link_topology.h>
+#include <linux/sfp.h>
+
+struct phy_req_info {
+ struct ethnl_req_info base;
+ struct phy_device_node pdn;
+};
+
+#define PHY_REQINFO(__req_base) \
+ container_of(__req_base, struct phy_req_info, base)
+
+const struct nla_policy ethnl_phy_get_policy[ETHTOOL_A_PHY_HEADER + 1] = {
+ [ETHTOOL_A_PHY_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy),
+};
+
+/* Caller holds rtnl */
+static ssize_t
+ethnl_phy_reply_size(const struct ethnl_req_info *req_base,
+ struct netlink_ext_ack *extack)
+{
+ struct phy_req_info *req_info = PHY_REQINFO(req_base);
+ struct phy_device_node *pdn = &req_info->pdn;
+ struct phy_device *phydev = pdn->phy;
+ size_t size = 0;
+
+ ASSERT_RTNL();
+
+ /* ETHTOOL_A_PHY_INDEX */
+ size += nla_total_size(sizeof(u32));
+
+ /* ETHTOOL_A_DRVNAME */
+ if (phydev->drv)
+ size += nla_total_size(strlen(phydev->drv->name) + 1);
+
+ /* ETHTOOL_A_NAME */
+ size += nla_total_size(strlen(dev_name(&phydev->mdio.dev)) + 1);
+
+ /* ETHTOOL_A_PHY_UPSTREAM_TYPE */
+ size += nla_total_size(sizeof(u32));
+
+ /* ETHTOOL_A_PHY_ID */
+ size += nla_total_size(sizeof(u32));
+
+ if (phy_on_sfp(phydev)) {
+ const char *upstream_sfp_name = sfp_get_name(pdn->parent_sfp_bus);
+
+ /* ETHTOOL_A_PHY_UPSTREAM_SFP_NAME */
+ if (upstream_sfp_name)
+ size += nla_total_size(strlen(upstream_sfp_name) + 1);
+
+ /* ETHTOOL_A_PHY_UPSTREAM_INDEX */
+ size += nla_total_size(sizeof(u32));
+ }
+
+ /* ETHTOOL_A_PHY_DOWNSTREAM_SFP_NAME */
+ if (phydev->sfp_bus) {
+ const char *sfp_name = sfp_get_name(phydev->sfp_bus);
+
+ if (sfp_name)
+ size += nla_total_size(strlen(sfp_name) + 1);
+ }
+
+ return size;
+}
+
+static int
+ethnl_phy_fill_reply(const struct ethnl_req_info *req_base, struct sk_buff *skb)
+{
+ struct phy_req_info *req_info = PHY_REQINFO(req_base);
+ struct phy_device_node *pdn = &req_info->pdn;
+ struct phy_device *phydev = pdn->phy;
+ enum phy_upstream ptype;
+
+ ptype = pdn->upstream_type;
+
+ if (nla_put_u32(skb, ETHTOOL_A_PHY_INDEX, phydev->phyindex) ||
+ nla_put_string(skb, ETHTOOL_A_PHY_NAME, dev_name(&phydev->mdio.dev)) ||
+ nla_put_u32(skb, ETHTOOL_A_PHY_UPSTREAM_TYPE, ptype) ||
+ nla_put_u32(skb, ETHTOOL_A_PHY_ID, phydev->phy_id))
+ return -EMSGSIZE;
+
+ if (phydev->drv &&
+ nla_put_string(skb, ETHTOOL_A_PHY_DRVNAME, phydev->drv->name))
+ return -EMSGSIZE;
+
+ if (ptype == PHY_UPSTREAM_PHY) {
+ struct phy_device *upstream = pdn->upstream.phydev;
+ const char *sfp_upstream_name;
+
+ /* Parent index */
+ if (nla_put_u32(skb, ETHTOOL_A_PHY_UPSTREAM_INDEX, upstream->phyindex))
+ return -EMSGSIZE;
+
+ if (pdn->parent_sfp_bus) {
+ sfp_upstream_name = sfp_get_name(pdn->parent_sfp_bus);
+ if (sfp_upstream_name &&
+ nla_put_string(skb, ETHTOOL_A_PHY_UPSTREAM_SFP_NAME,
+ sfp_upstream_name))
+ return -EMSGSIZE;
+ }
+ }
+
+ if (phydev->sfp_bus) {
+ const char *sfp_name = sfp_get_name(phydev->sfp_bus);
+
+ if (sfp_name &&
+ nla_put_string(skb, ETHTOOL_A_PHY_DOWNSTREAM_SFP_NAME,
+ sfp_name))
+ return -EMSGSIZE;
+ }
+
+ return 0;
+}
+
+static int ethnl_phy_parse_request(struct ethnl_req_info *req_base,
+ struct nlattr **tb)
+{
+ struct phy_link_topology *topo = req_base->dev->link_topo;
+ struct phy_req_info *req_info = PHY_REQINFO(req_base);
+ struct phy_device_node *pdn;
+
+ if (!req_base->phydev)
+ return 0;
+
+ if (!topo)
+ return 0;
+
+ pdn = xa_load(&topo->phys, req_base->phydev->phyindex);
+ memcpy(&req_info->pdn, pdn, sizeof(*pdn));
+
+ return 0;
+}
+
+int ethnl_phy_doit(struct sk_buff *skb, struct genl_info *info)
+{
+ struct phy_req_info req_info = {};
+ struct nlattr **tb = info->attrs;
+ struct sk_buff *rskb;
+ void *reply_payload;
+ int reply_len;
+ int ret;
+
+ ret = ethnl_parse_header_dev_get(&req_info.base,
+ tb[ETHTOOL_A_PHY_HEADER],
+ genl_info_net(info), info->extack,
+ true);
+ if (ret < 0)
+ return ret;
+
+ rtnl_lock();
+
+ ret = ethnl_phy_parse_request(&req_info.base, tb);
+ if (ret < 0)
+ goto err_unlock_rtnl;
+
+ /* No PHY, return early */
+ if (!req_info.pdn.phy)
+ goto err_unlock_rtnl;
+
+ ret = ethnl_phy_reply_size(&req_info.base, info->extack);
+ if (ret < 0)
+ goto err_unlock_rtnl;
+ reply_len = ret + ethnl_reply_header_size();
+
+ rskb = ethnl_reply_init(reply_len, req_info.base.dev,
+ ETHTOOL_MSG_PHY_GET_REPLY,
+ ETHTOOL_A_PHY_HEADER,
+ info, &reply_payload);
+ if (!rskb) {
+ ret = -ENOMEM;
+ goto err_unlock_rtnl;
+ }
+
+ ret = ethnl_phy_fill_reply(&req_info.base, rskb);
+ if (ret)
+ goto err_free_msg;
+
+ rtnl_unlock();
+ ethnl_parse_header_dev_put(&req_info.base);
+ genlmsg_end(rskb, reply_payload);
+
+ return genlmsg_reply(rskb, info);
+
+err_free_msg:
+ nlmsg_free(rskb);
+err_unlock_rtnl:
+ rtnl_unlock();
+ ethnl_parse_header_dev_put(&req_info.base);
+ return ret;
+}
+
+struct ethnl_phy_dump_ctx {
+ struct phy_req_info *phy_req_info;
+ unsigned long ifindex;
+ unsigned long phy_index;
+};
+
+int ethnl_phy_start(struct netlink_callback *cb)
+{
+ const struct genl_info *info = genl_info_dump(cb);
+ struct ethnl_phy_dump_ctx *ctx = (void *)cb->ctx;
+ int ret;
+
+ BUILD_BUG_ON(sizeof(*ctx) > sizeof(cb->ctx));
+
+ ctx->phy_req_info = kzalloc(sizeof(*ctx->phy_req_info), GFP_KERNEL);
+ if (!ctx->phy_req_info)
+ return -ENOMEM;
+
+ ret = ethnl_parse_header_dev_get(&ctx->phy_req_info->base,
+ info->attrs[ETHTOOL_A_PHY_HEADER],
+ sock_net(cb->skb->sk), cb->extack,
+ false);
+ ctx->ifindex = 0;
+ ctx->phy_index = 0;
+
+ if (ret)
+ kfree(ctx->phy_req_info);
+
+ return ret;
+}
+
+int ethnl_phy_done(struct netlink_callback *cb)
+{
+ struct ethnl_phy_dump_ctx *ctx = (void *)cb->ctx;
+
+ ethnl_parse_header_dev_put(&ctx->phy_req_info->base);
+ kfree(ctx->phy_req_info);
+
+ return 0;
+}
+
+static int ethnl_phy_dump_one_dev(struct sk_buff *skb, struct net_device *dev,
+ struct netlink_callback *cb)
+{
+ struct ethnl_phy_dump_ctx *ctx = (void *)cb->ctx;
+ struct phy_req_info *pri = ctx->phy_req_info;
+ struct phy_device_node *pdn;
+ int ret = 0;
+ void *ehdr;
+
+ pri->base.dev = dev;
+
+ if (!dev->link_topo)
+ return 0;
+
+ xa_for_each_start(&dev->link_topo->phys, ctx->phy_index, pdn, ctx->phy_index) {
+ ehdr = ethnl_dump_put(skb, cb, ETHTOOL_MSG_PHY_GET_REPLY);
+ if (!ehdr) {
+ ret = -EMSGSIZE;
+ break;
+ }
+
+ ret = ethnl_fill_reply_header(skb, dev, ETHTOOL_A_PHY_HEADER);
+ if (ret < 0) {
+ genlmsg_cancel(skb, ehdr);
+ break;
+ }
+
+ memcpy(&pri->pdn, pdn, sizeof(*pdn));
+ ret = ethnl_phy_fill_reply(&pri->base, skb);
+ if (ret < 0) {
+ genlmsg_cancel(skb, ehdr);
+ break;
+ }
+
+ genlmsg_end(skb, ehdr);
+ }
+
+ return ret;
+}
+
+int ethnl_phy_dumpit(struct sk_buff *skb, struct netlink_callback *cb)
+{
+ struct ethnl_phy_dump_ctx *ctx = (void *)cb->ctx;
+ struct net *net = sock_net(skb->sk);
+ struct net_device *dev;
+ int ret = 0;
+
+ rtnl_lock();
+
+ if (ctx->phy_req_info->base.dev) {
+ ret = ethnl_phy_dump_one_dev(skb, ctx->phy_req_info->base.dev, cb);
+ } else {
+ for_each_netdev_dump(net, dev, ctx->ifindex) {
+ ret = ethnl_phy_dump_one_dev(skb, dev, cb);
+ if (ret)
+ break;
+
+ ctx->phy_index = 0;
+ }
+ }
+ rtnl_unlock();
+
+ return ret;
+}
+
--
2.45.1
PSE and PD configuration is a PHY-specific command. Instead of targeting
the command towards dev->phydev, use the request to pick the targeted
PHY device.
Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Kory Maincent <[email protected]>
---
net/ethtool/pse-pd.c | 16 ++++++----------
1 file changed, 6 insertions(+), 10 deletions(-)
diff --git a/net/ethtool/pse-pd.c b/net/ethtool/pse-pd.c
index 2c981d443f27..3289a3631215 100644
--- a/net/ethtool/pse-pd.c
+++ b/net/ethtool/pse-pd.c
@@ -28,15 +28,13 @@ struct pse_reply_data {
/* PSE_GET */
const struct nla_policy ethnl_pse_get_policy[ETHTOOL_A_PSE_HEADER + 1] = {
- [ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy),
+ [ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy_phy),
};
-static int pse_get_pse_attributes(struct net_device *dev,
+static int pse_get_pse_attributes(struct phy_device *phydev,
struct netlink_ext_ack *extack,
struct pse_reply_data *data)
{
- struct phy_device *phydev = dev->phydev;
-
if (!phydev) {
NL_SET_ERR_MSG(extack, "No PHY is attached");
return -EOPNOTSUPP;
@@ -64,7 +62,7 @@ static int pse_prepare_data(const struct ethnl_req_info *req_base,
if (ret < 0)
return ret;
- ret = pse_get_pse_attributes(dev, info->extack, data);
+ ret = pse_get_pse_attributes(req_base->phydev, info->extack, data);
ethnl_ops_complete(dev);
@@ -123,7 +121,7 @@ static int pse_fill_reply(struct sk_buff *skb,
/* PSE_SET */
const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = {
- [ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy),
+ [ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy_phy),
[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL] =
NLA_POLICY_RANGE(NLA_U32, ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED,
ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED),
@@ -135,11 +133,10 @@ const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = {
static int
ethnl_set_pse_validate(struct ethnl_req_info *req_info, struct genl_info *info)
{
- struct net_device *dev = req_info->dev;
struct nlattr **tb = info->attrs;
struct phy_device *phydev;
- phydev = dev->phydev;
+ phydev = req_info->phydev;
if (!phydev) {
NL_SET_ERR_MSG(info->extack, "No PHY is attached");
return -EOPNOTSUPP;
@@ -171,12 +168,11 @@ ethnl_set_pse_validate(struct ethnl_req_info *req_info, struct genl_info *info)
static int
ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
{
- struct net_device *dev = req_info->dev;
struct pse_control_config config = {};
struct nlattr **tb = info->attrs;
struct phy_device *phydev;
- phydev = dev->phydev;
+ phydev = req_info->phydev;
/* These values are already validated by the ethnl_pse_set_policy */
if (pse_has_podl(phydev->psec))
config.podl_admin_control = nla_get_u32(tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL]);
--
2.45.1
On Fri, 7 Jun 2024 09:18:14 +0200 Maxime Chevallier wrote:
> +static inline struct phy_device
> +*phy_link_topo_get_phy(struct net_device *dev, u32 phyindex)
nit: * on the previous line
On Fri, 7 Jun 2024 09:18:17 +0200 Maxime Chevallier wrote:
> +EXPORT_SYMBOL_GPL(sfp_get_name);
Russell, there are no in-tree module callers, do you prefer to keep
the exports for completeness?
On Fri, 7 Jun 2024 09:18:18 +0200 Maxime Chevallier wrote:
> + if (tb[ETHTOOL_A_HEADER_PHY_INDEX]) {
> + struct nlattr *phy_id;
> +
> + phy_id = tb[ETHTOOL_A_HEADER_PHY_INDEX];
> + phydev = phy_link_topo_get_phy(dev,
> + nla_get_u32(phy_id));
Sorry for potentially repeating question (please put the answer in the
commit message) - are phys guaranteed not to disappear, even if the
netdev gets closed? this has no rtnl protection
> + if (!phydev) {
> + NL_SET_BAD_ATTR(extack, phy_id);
> + return -ENODEV;
> + }
> + } else {
> + /* If we need a PHY but no phy index is specified, fallback
> + * to dev->phydev
please double check the submission for going over 80 chars, this one
appears to be particularly pointlessly over 80 chars...
> + */
> + phydev = dev->phydev;
On Fri, 7 Jun 2024 09:18:20 +0200 Maxime Chevallier wrote:
> + it's parent PHY through an SFP
its
> +static int ethnl_phy_parse_request(struct ethnl_req_info *req_base,
> + struct nlattr **tb)
> +{
> + struct phy_link_topology *topo = req_base->dev->link_topo;
> + struct phy_req_info *req_info = PHY_REQINFO(req_base);
> + struct phy_device_node *pdn;
> +
> + if (!req_base->phydev)
> + return 0;
> +
> + if (!topo)
> + return 0;
> +
> + pdn = xa_load(&topo->phys, req_base->phydev->phyindex);
> + memcpy(&req_info->pdn, pdn, sizeof(*pdn));
> + xa_for_each_start(&dev->link_topo->phys, ctx->phy_index, pdn, ctx->phy_index) {
> + ehdr = ethnl_dump_put(skb, cb, ETHTOOL_MSG_PHY_GET_REPLY);
> + if (!ehdr) {
> + ret = -EMSGSIZE;
> + break;
> + }
> +
> + ret = ethnl_fill_reply_header(skb, dev, ETHTOOL_A_PHY_HEADER);
> + if (ret < 0) {
> + genlmsg_cancel(skb, ehdr);
> + break;
> + }
> +
> + memcpy(&pri->pdn, pdn, sizeof(*pdn));
Why do you copy the pdn each time ????️
> + return ret;
> +}
> +
double new line at the end
Hello Jakub,
On Thu, 13 Jun 2024 17:58:19 -0700
Jakub Kicinski <[email protected]> wrote:
> On Fri, 7 Jun 2024 09:18:14 +0200 Maxime Chevallier wrote:
> > +static inline struct phy_device
> > +*phy_link_topo_get_phy(struct net_device *dev, u32 phyindex)
>
> nit: * on the previous line
I'll address that, thanks for reviewing !
Maxime