Fixes the following DTB check warning:
> node has a reg or ranges property, but no unit name
Signed-off-by: Andrew Davis <[email protected]>
---
arch/arm/boot/dts/nspire/nspire-classic.dtsi | 2 +-
arch/arm/boot/dts/nspire/nspire-cx.dts | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/nspire/nspire-classic.dtsi b/arch/arm/boot/dts/nspire/nspire-classic.dtsi
index a6e9cbf51524d..0ee53d3ecd542 100644
--- a/arch/arm/boot/dts/nspire/nspire-classic.dtsi
+++ b/arch/arm/boot/dts/nspire/nspire-classic.dtsi
@@ -55,7 +55,7 @@ &vbus_reg {
};
/ {
- memory {
+ memory@10000000 {
device_type = "memory";
reg = <0x10000000 0x2000000>; /* 32 MB */
};
diff --git a/arch/arm/boot/dts/nspire/nspire-cx.dts b/arch/arm/boot/dts/nspire/nspire-cx.dts
index 29f0181e5b385..debeff0ec010f 100644
--- a/arch/arm/boot/dts/nspire/nspire-cx.dts
+++ b/arch/arm/boot/dts/nspire/nspire-cx.dts
@@ -122,7 +122,7 @@ / {
model = "TI-NSPIRE CX";
compatible = "ti,nspire-cx";
- memory {
+ memory@10000000 {
device_type = "memory";
reg = <0x10000000 0x4000000>; /* 64 MB */
};
--
2.39.2
The watchdog appears to be an ARM SP805, add the full compatible
and the needed clocks properties. Leave this disabled for now
as functionality is not fully tested.
Signed-off-by: Andrew Davis <[email protected]>
---
arch/arm/boot/dts/nspire/nspire.dtsi | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/nspire/nspire.dtsi b/arch/arm/boot/dts/nspire/nspire.dtsi
index d56fef7250dbd..95588b716c6f3 100644
--- a/arch/arm/boot/dts/nspire/nspire.dtsi
+++ b/arch/arm/boot/dts/nspire/nspire.dtsi
@@ -170,9 +170,12 @@ timer1: timer@900d0000 {
};
watchdog: watchdog@90060000 {
- compatible = "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x90060000 0x1000>;
interrupts = <3>;
+ clocks = <&apb_pclk>, <&apb_pclk>;
+ clock-names = "wdog_clk", "apb_pclk";
+ status = "disabled";
};
rtc: rtc@90090000 {
--
2.39.2