This series adds device tree nodes for Multi Channel Serial Peripheral
Interface (MCSPI) on J721E, J7200, J721S2 and J784S4 platforms. All the
MCSPI instances are disabled by default and can be enabled through overlays
as required, the changes were tested using spidev loopback test for all
instances and the data verified only for main_spi4 which is connected
internally as slave to mcu_spi2 for all existing J7 devices.
Vaishnav Achath (8):
arm64: dts: ti: k3-j721e-main: Add MCSPI nodes
arm64: dts: ti: k3-j721e-mcu-wakeup: Add MCSPI nodes
arm64: dts: ti: k3-j7200-main: Add MCSPI nodes
arm64: dts: ti: k3-j7200-mcu-wakeup: Add MCSPI nodes
arm64: dts: ti: k3-j721s2-main: Add MCSPI nodes
arm64: dts: ti: k3-j721s2-mcu-wakeup: Add MCSPI nodes
arm64: dts: ti: k3-j784s4-main: Add MCSPI nodes
arm64: dts: ti: k3-j784s4-mcu-wakeup: Add MCSPI nodes
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 88 +++++++++++++++++++
.../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 33 +++++++
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 88 +++++++++++++++++++
.../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 33 +++++++
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 88 +++++++++++++++++++
.../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 33 +++++++
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 88 +++++++++++++++++++
.../boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 33 +++++++
8 files changed, 484 insertions(+)
--
2.17.1
J721E has 3 MCSPI instances in the MCU domain. Add the
DT nodes for all the 3 instances and keep them disabled.
Co-developed-by: Keerthy <[email protected]>
Signed-off-by: Keerthy <[email protected]>
Signed-off-by: Vaishnav Achath <[email protected]>
---
.../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 33 +++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index 8ac78034d5d6..24e8125db8c4 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -425,4 +425,37 @@
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
status = "disabled";
};
+
+ mcu_spi0: spi@40300000 {
+ compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+ reg = <0x00 0x040300000 0x00 0x400>;
+ interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 274 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 274 0>;
+ status = "disabled";
+ };
+
+ mcu_spi1: spi@40310000 {
+ compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+ reg = <0x00 0x040310000 0x00 0x400>;
+ interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 275 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 275 0>;
+ status = "disabled";
+ };
+
+ mcu_spi2: spi@40320000 {
+ compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+ reg = <0x00 0x040320000 0x00 0x400>;
+ interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 276 0>;
+ status = "disabled";
+ };
};
--
2.17.1
J7200 has 8 MCSPI instances in the main domain. Add the
DT nodes for all the 8 instances and keep them disabled.
Signed-off-by: Vaishnav Achath <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 88 +++++++++++++++++++++++
1 file changed, 88 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 138381f43ce4..e7ede18e75fa 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -777,6 +777,94 @@
clock-names = "gpio";
};
+ main_spi0: spi@2100000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02100000 0x00 0x400>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 266 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 266 1>;
+ status = "disabled";
+ };
+
+ main_spi1: spi@2110000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02110000 0x00 0x400>;
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 267 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 267 1>;
+ status = "disabled";
+ };
+
+ main_spi2: spi@2120000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02120000 0x00 0x400>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 268 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 268 1>;
+ status = "disabled";
+ };
+
+ main_spi3: spi@2130000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02130000 0x00 0x400>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 269 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 269 1>;
+ status = "disabled";
+ };
+
+ main_spi4: spi@2140000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02140000 0x00 0x400>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 270 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 270 1>;
+ status = "disabled";
+ };
+
+ main_spi5: spi@2150000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02150000 0x00 0x400>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 271 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 271 1>;
+ status = "disabled";
+ };
+
+ main_spi6: spi@2160000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02160000 0x00 0x400>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 272 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 272 1>;
+ status = "disabled";
+ };
+
+ main_spi7: spi@2170000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02170000 0x00 0x400>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 273 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 273 1>;
+ status = "disabled";
+ };
+
watchdog0: watchdog@2200000 {
compatible = "ti,j7-rti-wdt";
reg = <0x0 0x2200000 0x0 0x100>;
--
2.17.1
J7200 has 3 MCSPI instances in the MCU domain. Add the
DT nodes for all the 3 instances and keep them disabled.
Signed-off-by: Vaishnav Achath <[email protected]>
---
.../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 33 +++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index de56a0165bd0..331b4e482e41 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -305,6 +305,39 @@
status = "disabled";
};
+ mcu_spi0: spi@40300000 {
+ compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+ reg = <0x00 0x040300000 0x00 0x400>;
+ interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 274 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 274 0>;
+ status = "disabled";
+ };
+
+ mcu_spi1: spi@40310000 {
+ compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+ reg = <0x00 0x040310000 0x00 0x400>;
+ interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 275 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 275 0>;
+ status = "disabled";
+ };
+
+ mcu_spi2: spi@40320000 {
+ compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+ reg = <0x00 0x040320000 0x00 0x400>;
+ interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 276 0>;
+ status = "disabled";
+ };
+
fss: syscon@47000000 {
compatible = "syscon", "simple-mfd";
reg = <0x00 0x47000000 0x00 0x100>;
--
2.17.1
J721S2 has 8 MCSPI instances in the main domain. Add the
DT nodes for all the 8 instances and keep them disabled.
Signed-off-by: Vaishnav Achath <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 88 ++++++++++++++++++++++
1 file changed, 88 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 8915132efcc1..2dd7865f7654 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -1014,4 +1014,92 @@
bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
status = "disabled";
};
+
+ main_spi0: spi@2100000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02100000 0x00 0x400>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 339 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 339 1>;
+ status = "disabled";
+ };
+
+ main_spi1: spi@2110000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02110000 0x00 0x400>;
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 340 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 340 1>;
+ status = "disabled";
+ };
+
+ main_spi2: spi@2120000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02120000 0x00 0x400>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 341 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 341 1>;
+ status = "disabled";
+ };
+
+ main_spi3: spi@2130000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02130000 0x00 0x400>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 342 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 342 1>;
+ status = "disabled";
+ };
+
+ main_spi4: spi@2140000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02140000 0x00 0x400>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 343 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 343 1>;
+ status = "disabled";
+ };
+
+ main_spi5: spi@2150000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02150000 0x00 0x400>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 344 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 344 1>;
+ status = "disabled";
+ };
+
+ main_spi6: spi@2160000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02160000 0x00 0x400>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 345 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 345 1>;
+ status = "disabled";
+ };
+
+ main_spi7: spi@2170000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02170000 0x00 0x400>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 346 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 346 1>;
+ status = "disabled";
+ };
};
--
2.17.1
J721S2 has 3 MCSPI instances in the MCU domain. Add the
DT nodes for all the 3 instances and keep them disabled.
Signed-off-by: Vaishnav Achath <[email protected]>
---
.../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 33 +++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 0af242aa9816..9e5a8a35a01b 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -203,6 +203,39 @@
status = "disabled";
};
+ mcu_spi0: spi@40300000 {
+ compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+ reg = <0x00 0x040300000 0x00 0x400>;
+ interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 347 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 347 0>;
+ status = "disabled";
+ };
+
+ mcu_spi1: spi@40310000 {
+ compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+ reg = <0x00 0x040310000 0x00 0x400>;
+ interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 348 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 348 0>;
+ status = "disabled";
+ };
+
+ mcu_spi2: spi@40320000 {
+ compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+ reg = <0x00 0x040320000 0x00 0x400>;
+ interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 349 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 349 0>;
+ status = "disabled";
+ };
+
mcu_navss: bus@28380000{
compatible = "simple-mfd";
#address-cells = <2>;
--
2.17.1
J784S4 has 3 MCSPI instances in the MCU domain. Add the
DT nodes for all the 3 instances and keep them disabled.
Signed-off-by: Vaishnav Achath <[email protected]>
---
.../boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 33 +++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
index 64bd3dee14aa..f04fcb614cbe 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -204,6 +204,39 @@
status = "disabled";
};
+ mcu_spi0: spi@40300000 {
+ compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+ reg = <0x00 0x040300000 0x00 0x400>;
+ interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 384 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 384 0>;
+ status = "disabled";
+ };
+
+ mcu_spi1: spi@40310000 {
+ compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+ reg = <0x00 0x040310000 0x00 0x400>;
+ interrupts = <GIC_SPI 849 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 385 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 385 0>;
+ status = "disabled";
+ };
+
+ mcu_spi2: spi@40320000 {
+ compatible = "ti,am654-mcspi", "ti,omap4-mcspi";
+ reg = <0x00 0x040320000 0x00 0x400>;
+ interrupts = <GIC_SPI 850 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 386 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 386 0>;
+ status = "disabled";
+ };
+
mcu_navss: bus@28380000{
compatible = "simple-bus";
#address-cells = <2>;
--
2.17.1
J784S4 has 8 MCSPI instances in the main domain. Add the
DT nodes for all the 8 instances and keep them disabled.
Signed-off-by: Vaishnav Achath <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 88 ++++++++++++++++++++++
1 file changed, 88 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index 80a1b08c51a8..432592ef3bc4 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -1005,4 +1005,92 @@
bosch,mram-cfg = <0x00 128 64 64 64 64 32 32>;
status = "disabled";
};
+
+ main_spi0: spi@2100000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02100000 0x00 0x400>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 376 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 376 1>;
+ status = "disabled";
+ };
+
+ main_spi1: spi@2110000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02110000 0x00 0x400>;
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 377 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 377 1>;
+ status = "disabled";
+ };
+
+ main_spi2: spi@2120000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02120000 0x00 0x400>;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 378 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 378 1>;
+ status = "disabled";
+ };
+
+ main_spi3: spi@2130000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02130000 0x00 0x400>;
+ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 379 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 379 1>;
+ status = "disabled";
+ };
+
+ main_spi4: spi@2140000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02140000 0x00 0x400>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 380 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 380 1>;
+ status = "disabled";
+ };
+
+ main_spi5: spi@2150000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02150000 0x00 0x400>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 381 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 381 1>;
+ status = "disabled";
+ };
+
+ main_spi6: spi@2160000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02160000 0x00 0x400>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 382 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 382 1>;
+ status = "disabled";
+ };
+
+ main_spi7: spi@2170000 {
+ compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+ reg = <0x00 0x02170000 0x00 0x400>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ power-domains = <&k3_pds 383 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 383 1>;
+ status = "disabled";
+ };
};
--
2.17.1
On 11:00-20230320, Vaishnav Achath wrote:
> This series adds device tree nodes for Multi Channel Serial Peripheral
> Interface (MCSPI) on J721E, J7200, J721S2 and J784S4 platforms. All the
> MCSPI instances are disabled by default and can be enabled through overlays
> as required, the changes were tested using spidev loopback test for all
> instances and the data verified only for main_spi4 which is connected
> internally as slave to mcu_spi2 for all existing J7 devices.
>
> Vaishnav Achath (8):
> arm64: dts: ti: k3-j721e-main: Add MCSPI nodes
> arm64: dts: ti: k3-j721e-mcu-wakeup: Add MCSPI nodes
> arm64: dts: ti: k3-j7200-main: Add MCSPI nodes
> arm64: dts: ti: k3-j7200-mcu-wakeup: Add MCSPI nodes
> arm64: dts: ti: k3-j721s2-main: Add MCSPI nodes
> arm64: dts: ti: k3-j721s2-mcu-wakeup: Add MCSPI nodes
> arm64: dts: ti: k3-j784s4-main: Add MCSPI nodes
> arm64: dts: ti: k3-j784s4-mcu-wakeup: Add MCSPI nodes
Why split the patches per bus? why not club the patches at SoC level?
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Hi Nishanth,
On 20/03/23 20:46, Nishanth Menon wrote:
> On 11:00-20230320, Vaishnav Achath wrote:
>> This series adds device tree nodes for Multi Channel Serial Peripheral
>> Interface (MCSPI) on J721E, J7200, J721S2 and J784S4 platforms. All the
>> MCSPI instances are disabled by default and can be enabled through overlays
>> as required, the changes were tested using spidev loopback test for all
>> instances and the data verified only for main_spi4 which is connected
>> internally as slave to mcu_spi2 for all existing J7 devices.
>>
>> Vaishnav Achath (8):
>> arm64: dts: ti: k3-j721e-main: Add MCSPI nodes
>> arm64: dts: ti: k3-j721e-mcu-wakeup: Add MCSPI nodes
>> arm64: dts: ti: k3-j7200-main: Add MCSPI nodes
>> arm64: dts: ti: k3-j7200-mcu-wakeup: Add MCSPI nodes
>> arm64: dts: ti: k3-j721s2-main: Add MCSPI nodes
>> arm64: dts: ti: k3-j721s2-mcu-wakeup: Add MCSPI nodes
>> arm64: dts: ti: k3-j784s4-main: Add MCSPI nodes
>> arm64: dts: ti: k3-j784s4-mcu-wakeup: Add MCSPI nodes
>
> Why split the patches per bus? why not club the patches at SoC level?
>
I split them initially since the changes were in two different files, I have
combined the changes at SoC level and send a V2,
https://lore.kernel.org/all/[email protected]/#r
--
Regards,
Vaishnav