Hello!
This is implementation of SDHCI CQE support for sdhci-of-dwcmshc driver.
For enabling CQE support just set 'supports-cqe' in your DevTree file
for appropriate mmc node.
Also, while implementing CQE support for the driver, I faced with a problem
which I will describe below.
According to the IP block documentation CQE works only with "AMDA-2 only"
mode which is activated only with v4 mode enabled. I see in dwcmshc_probe()
function that v4 mode gets enabled only for 'sdhci_dwcmshc_bf3_pdata'
platform data.
So my question is: is it correct to enable v4 mode for all platform data
if 'SDHCI_CAN_64BIT_V4' bit is set in hw?
Because I`m afraid that enabling v4 mode for some platforms could break
them down. On the other hand, if host controller says that it can do v4
(caps & SDHCI_CAN_64BIT_V4), lets do v4 or disable it manualy by some
quirk. Anyway - RFC.
v2:
- Added dwcmshc specific cqe_disable hook to prevent losing
in-flight cmd when an ioctl is issued and cqe_disable is called;
- Added processing 128Mb boundary for the host memory data buffer size
and the data buffer. For implementing this processing an extra
callback is added to the struct 'sdhci_ops'.
- Fixed typo.
v3:
- Fix warning reported by kernel test robot:
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
v4:
- Data reset moved to custom driver tuning hook.
- Removed unnecessary dwcmshc_sdhci_cqe_disable() func
- Removed unnecessary dwcmshc_cqhci_set_tran_desc. Export and use
cqhci_set_tran_desc() instead.
- Provide a hook for cqhci_set_tran_desc() instead of cqhci_prep_tran_desc().
- Fix typo: int_clok_disable --> int_clock_disable
v5:
- Fix warning reported by kernel test robot:
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
v6:
- Rebase to master branch
- Fix typo;
- Fix double blank line;
- Add cqhci_suspend() and cqhci_resume() functions
to support mmc suspend-to-ram (s2r);
- Move reading DWCMSHC_P_VENDOR_AREA2 register under "supports-cqe"
condition as not all IPs have that register;
- Remove sdhci V4 mode from the list of prerequisites to init cqhci.
Sergey Khimich (2):
mmc: cqhci: Add cqhci set_tran_desc() callback
mmc: sdhci-of-dwcmshc: Implement SDHCI CQE support
drivers/mmc/host/Kconfig | 1 +
drivers/mmc/host/cqhci-core.c | 11 +-
drivers/mmc/host/cqhci.h | 4 +
drivers/mmc/host/sdhci-of-dwcmshc.c | 188 +++++++++++++++++++++++++++-
4 files changed, 199 insertions(+), 5 deletions(-)
--
2.30.2
From: Sergey Khimich <[email protected]>
For enabling CQE support just set 'supports-cqe' in your DevTree file
for appropriate mmc node.
Signed-off-by: Sergey Khimich <[email protected]>
---
drivers/mmc/host/Kconfig | 1 +
drivers/mmc/host/sdhci-of-dwcmshc.c | 188 +++++++++++++++++++++++++++-
2 files changed, 187 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 81f2c4e05287..554dbf7f2fa4 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -233,6 +233,7 @@ config MMC_SDHCI_OF_DWCMSHC
depends on MMC_SDHCI_PLTFM
depends on OF
depends on COMMON_CLK
+ select MMC_CQHCI
help
This selects Synopsys DesignWare Cores Mobile Storage Controller
support.
diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
index a1f57af6acfb..3ddf5024b0f9 100644
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
@@ -21,6 +21,7 @@
#include <linux/sizes.h>
#include "sdhci-pltfm.h"
+#include "cqhci.h"
#define SDHCI_DWCMSHC_ARG2_STUFF GENMASK(31, 16)
@@ -52,6 +53,9 @@
#define AT_CTRL_SWIN_TH_VAL_MASK GENMASK(31, 24) /* bits [31:24] */
#define AT_CTRL_SWIN_TH_VAL 0x9 /* sampling window threshold */
+/* DWC IP vendor area 2 pointer */
+#define DWCMSHC_P_VENDOR_AREA2 0xea
+
/* Rockchip specific Registers */
#define DWCMSHC_EMMC_DLL_CTRL 0x800
#define DWCMSHC_EMMC_DLL_RXCLK 0x804
@@ -167,6 +171,10 @@
#define BOUNDARY_OK(addr, len) \
((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1)))
+#define DWCMSHC_SDHCI_CQE_TRNS_MODE (SDHCI_TRNS_MULTI | \
+ SDHCI_TRNS_BLK_CNT_EN | \
+ SDHCI_TRNS_DMA)
+
enum dwcmshc_rk_type {
DWCMSHC_RK3568,
DWCMSHC_RK3588,
@@ -182,7 +190,9 @@ struct rk35xx_priv {
struct dwcmshc_priv {
struct clk *bus_clk;
- int vendor_specific_area1; /* P_VENDOR_SPECIFIC_AREA reg */
+ int vendor_specific_area1; /* P_VENDOR_SPECIFIC_AREA1 reg */
+ int vendor_specific_area2; /* P_VENDOR_SPECIFIC_AREA2 reg */
+
void *priv; /* pointer to SoC private stuff */
u16 delay_line;
u16 flags;
@@ -441,6 +451,90 @@ static void dwcmshc_hs400_enhanced_strobe(struct mmc_host *mmc,
sdhci_writel(host, vendor, reg);
}
+static int dwcmshc_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+ int err = sdhci_execute_tuning(mmc, opcode);
+ struct sdhci_host *host = mmc_priv(mmc);
+
+ if (err)
+ return err;
+
+ /*
+ * Tuning can leave the IP in an active state (Buffer Read Enable bit
+ * set) which prevents the entry to low power states (i.e. S0i3). Data
+ * reset will clear it.
+ */
+ sdhci_reset(host, SDHCI_RESET_DATA);
+
+ return 0;
+}
+
+static u32 dwcmshc_cqe_irq_handler(struct sdhci_host *host, u32 intmask)
+{
+ int cmd_error = 0;
+ int data_error = 0;
+
+ if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error))
+ return intmask;
+
+ cqhci_irq(host->mmc, intmask, cmd_error, data_error);
+
+ return 0;
+}
+
+static void dwcmshc_sdhci_cqe_enable(struct mmc_host *mmc)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ u8 ctrl;
+
+ sdhci_writew(host, DWCMSHC_SDHCI_CQE_TRNS_MODE, SDHCI_TRANSFER_MODE);
+
+ sdhci_cqe_enable(mmc);
+
+ /*
+ * The "DesignWare Cores Mobile Storage Host Controller
+ * DWC_mshc / DWC_mshc_lite Databook" says:
+ * when Host Version 4 Enable" is 1 in Host Control 2 register,
+ * SDHCI_CTRL_ADMA32 bit means ADMA2 is selected.
+ * Selection of 32-bit/64-bit System Addressing:
+ * either 32-bit or 64-bit system addressing is selected by
+ * 64-bit Addressing bit in Host Control 2 register.
+ *
+ * On the other hand the "DesignWare Cores Mobile Storage Host
+ * Controller DWC_mshc / DWC_mshc_lite User Guide" says, that we have to
+ * set DMA_SEL to ADMA2 _only_ mode in the Host Control 2 register.
+ */
+ ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+ ctrl &= ~SDHCI_CTRL_DMA_MASK;
+ ctrl |= SDHCI_CTRL_ADMA32;
+ sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+}
+
+static void dwcmshc_set_tran_desc(struct cqhci_host *cq_host, u8 **desc,
+ dma_addr_t addr, int len, bool end, bool dma64)
+{
+ int tmplen, offset;
+
+ if (likely(!len || BOUNDARY_OK(addr, len))) {
+ cqhci_set_tran_desc(*desc, addr, len, end, dma64);
+ return;
+ }
+
+ offset = addr & (SZ_128M - 1);
+ tmplen = SZ_128M - offset;
+ cqhci_set_tran_desc(*desc, addr, tmplen, false, dma64);
+
+ addr += tmplen;
+ len -= tmplen;
+ *desc += cq_host->trans_desc_len;
+ cqhci_set_tran_desc(*desc, addr, len, end, dma64);
+}
+
+static void dwcmshc_cqhci_dumpregs(struct mmc_host *mmc)
+{
+ sdhci_dumpregs(mmc_priv(mmc));
+}
+
static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -649,6 +743,7 @@ static const struct sdhci_ops sdhci_dwcmshc_ops = {
.get_max_clock = dwcmshc_get_max_clock,
.reset = sdhci_reset,
.adma_write_desc = dwcmshc_adma_write_desc,
+ .irq = dwcmshc_cqe_irq_handler,
};
static const struct sdhci_ops sdhci_dwcmshc_rk35xx_ops = {
@@ -700,6 +795,70 @@ static const struct sdhci_pltfm_data sdhci_dwcmshc_th1520_pdata = {
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
};
+static const struct cqhci_host_ops dwcmshc_cqhci_ops = {
+ .enable = dwcmshc_sdhci_cqe_enable,
+ .disable = sdhci_cqe_disable,
+ .dumpregs = dwcmshc_cqhci_dumpregs,
+ .set_tran_desc = dwcmshc_set_tran_desc,
+};
+
+static void dwcmshc_cqhci_init(struct sdhci_host *host, struct platform_device *pdev)
+{
+ struct cqhci_host *cq_host;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ bool dma64 = false;
+ u16 clk;
+ int err;
+
+ host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
+ cq_host = devm_kzalloc(&pdev->dev, sizeof(*cq_host), GFP_KERNEL);
+ if (!cq_host) {
+ dev_err(mmc_dev(host->mmc), "Unable to setup CQE: not enough memory\n");
+ return;
+ }
+
+ /*
+ * For dwcmshc host controller we have to enable internal clock
+ * before access to some registers from Vendor Specific Area 2.
+ */
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ clk |= SDHCI_CLOCK_INT_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ if (!(clk & SDHCI_CLOCK_INT_EN)) {
+ dev_err(mmc_dev(host->mmc), "Unable to setup CQE: internal clock enable error\n");
+ goto free_cq_host;
+ }
+
+ cq_host->mmio = host->ioaddr + priv->vendor_specific_area2;
+ cq_host->ops = &dwcmshc_cqhci_ops;
+
+ /* Enable using of 128-bit task descriptors */
+ dma64 = host->flags & SDHCI_USE_64_BIT_DMA;
+ if (dma64) {
+ dev_dbg(mmc_dev(host->mmc), "128-bit task descriptors\n");
+ cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
+ }
+ err = cqhci_init(cq_host, host->mmc, dma64);
+ if (err) {
+ dev_err(mmc_dev(host->mmc), "Unable to setup CQE: error %d\n", err);
+ goto int_clock_disable;
+ }
+
+ dev_dbg(mmc_dev(host->mmc), "CQE init done\n");
+
+ return;
+
+int_clock_disable:
+ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+ clk &= ~SDHCI_CLOCK_INT_EN;
+ sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+free_cq_host:
+ devm_kfree(&pdev->dev, cq_host);
+}
+
static int dwcmshc_rk35xx_init(struct sdhci_host *host, struct dwcmshc_priv *dwc_priv)
{
int err;
@@ -796,7 +955,7 @@ static int dwcmshc_probe(struct platform_device *pdev)
struct rk35xx_priv *rk_priv = NULL;
const struct sdhci_pltfm_data *pltfm_data;
int err;
- u32 extra;
+ u32 extra, caps;
pltfm_data = device_get_match_data(&pdev->dev);
if (!pltfm_data) {
@@ -847,6 +1006,7 @@ static int dwcmshc_probe(struct platform_device *pdev)
host->mmc_host_ops.request = dwcmshc_request;
host->mmc_host_ops.hs400_enhanced_strobe = dwcmshc_hs400_enhanced_strobe;
+ host->mmc_host_ops.execute_tuning = dwcmshc_execute_tuning;
if (pltfm_data == &sdhci_dwcmshc_rk35xx_pdata) {
rk_priv = devm_kzalloc(&pdev->dev, sizeof(struct rk35xx_priv), GFP_KERNEL);
@@ -896,6 +1056,10 @@ static int dwcmshc_probe(struct platform_device *pdev)
sdhci_enable_v4_mode(host);
#endif
+ caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+ if (caps & SDHCI_CAN_64BIT_V4)
+ sdhci_enable_v4_mode(host);
+
host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
pm_runtime_get_noresume(dev);
@@ -906,6 +1070,14 @@ static int dwcmshc_probe(struct platform_device *pdev)
if (err)
goto err_rpm;
+ /* Setup Command Queue Engine if enabled */
+ if (device_property_read_bool(&pdev->dev, "supports-cqe")) {
+ priv->vendor_specific_area2 =
+ sdhci_readw(host, DWCMSHC_P_VENDOR_AREA2);
+
+ dwcmshc_cqhci_init(host, pdev);
+ }
+
if (rk_priv)
dwcmshc_rk35xx_postinit(host, priv);
@@ -961,6 +1133,12 @@ static int dwcmshc_suspend(struct device *dev)
pm_runtime_resume(dev);
+ if (host->mmc->caps2 & MMC_CAP2_CQE) {
+ ret = cqhci_suspend(host->mmc);
+ if (ret)
+ return ret;
+ }
+
ret = sdhci_suspend_host(host);
if (ret)
return ret;
@@ -1005,6 +1183,12 @@ static int dwcmshc_resume(struct device *dev)
if (ret)
goto disable_rockchip_clks;
+ if (host->mmc->caps2 & MMC_CAP2_CQE) {
+ ret = cqhci_resume(host->mmc);
+ if (ret)
+ goto disable_rockchip_clks;
+ }
+
return 0;
disable_rockchip_clks:
--
2.30.2
On 14/03/24 16:14, Sergey Khimich wrote:
> From: Sergey Khimich <[email protected]>
>
> For enabling CQE support just set 'supports-cqe' in your DevTree file
> for appropriate mmc node.
>
> Signed-off-by: Sergey Khimich <[email protected]>
> ---
> drivers/mmc/host/Kconfig | 1 +
> drivers/mmc/host/sdhci-of-dwcmshc.c | 188 +++++++++++++++++++++++++++-
> 2 files changed, 187 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 81f2c4e05287..554dbf7f2fa4 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -233,6 +233,7 @@ config MMC_SDHCI_OF_DWCMSHC
> depends on MMC_SDHCI_PLTFM
> depends on OF
> depends on COMMON_CLK
> + select MMC_CQHCI
> help
> This selects Synopsys DesignWare Cores Mobile Storage Controller
> support.
> diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
> index a1f57af6acfb..3ddf5024b0f9 100644
> --- a/drivers/mmc/host/sdhci-of-dwcmshc.c
> +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
> @@ -21,6 +21,7 @@
> #include <linux/sizes.h>
>
> #include "sdhci-pltfm.h"
> +#include "cqhci.h"
>
> #define SDHCI_DWCMSHC_ARG2_STUFF GENMASK(31, 16)
>
> @@ -52,6 +53,9 @@
> #define AT_CTRL_SWIN_TH_VAL_MASK GENMASK(31, 24) /* bits [31:24] */
> #define AT_CTRL_SWIN_TH_VAL 0x9 /* sampling window threshold */
>
> +/* DWC IP vendor area 2 pointer */
> +#define DWCMSHC_P_VENDOR_AREA2 0xea
> +
> /* Rockchip specific Registers */
> #define DWCMSHC_EMMC_DLL_CTRL 0x800
> #define DWCMSHC_EMMC_DLL_RXCLK 0x804
> @@ -167,6 +171,10 @@
> #define BOUNDARY_OK(addr, len) \
> ((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1)))
>
> +#define DWCMSHC_SDHCI_CQE_TRNS_MODE (SDHCI_TRNS_MULTI | \
> + SDHCI_TRNS_BLK_CNT_EN | \
> + SDHCI_TRNS_DMA)
> +
> enum dwcmshc_rk_type {
> DWCMSHC_RK3568,
> DWCMSHC_RK3588,
> @@ -182,7 +190,9 @@ struct rk35xx_priv {
>
> struct dwcmshc_priv {
> struct clk *bus_clk;
> - int vendor_specific_area1; /* P_VENDOR_SPECIFIC_AREA reg */
> + int vendor_specific_area1; /* P_VENDOR_SPECIFIC_AREA1 reg */
> + int vendor_specific_area2; /* P_VENDOR_SPECIFIC_AREA2 reg */
> +
> void *priv; /* pointer to SoC private stuff */
> u16 delay_line;
> u16 flags;
> @@ -441,6 +451,90 @@ static void dwcmshc_hs400_enhanced_strobe(struct mmc_host *mmc,
> sdhci_writel(host, vendor, reg);
> }
>
> +static int dwcmshc_execute_tuning(struct mmc_host *mmc, u32 opcode)
> +{
> + int err = sdhci_execute_tuning(mmc, opcode);
> + struct sdhci_host *host = mmc_priv(mmc);
> +
> + if (err)
> + return err;
> +
> + /*
> + * Tuning can leave the IP in an active state (Buffer Read Enable bit
> + * set) which prevents the entry to low power states (i.e. S0i3). Data
> + * reset will clear it.
> + */
> + sdhci_reset(host, SDHCI_RESET_DATA);
> +
> + return 0;
> +}
> +
> +static u32 dwcmshc_cqe_irq_handler(struct sdhci_host *host, u32 intmask)
> +{
> + int cmd_error = 0;
> + int data_error = 0;
> +
> + if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error))
> + return intmask;
> +
> + cqhci_irq(host->mmc, intmask, cmd_error, data_error);
> +
> + return 0;
> +}
> +
> +static void dwcmshc_sdhci_cqe_enable(struct mmc_host *mmc)
> +{
> + struct sdhci_host *host = mmc_priv(mmc);
> + u8 ctrl;
> +
> + sdhci_writew(host, DWCMSHC_SDHCI_CQE_TRNS_MODE, SDHCI_TRANSFER_MODE);
> +
> + sdhci_cqe_enable(mmc);
> +
> + /*
> + * The "DesignWare Cores Mobile Storage Host Controller
> + * DWC_mshc / DWC_mshc_lite Databook" says:
> + * when Host Version 4 Enable" is 1 in Host Control 2 register,
> + * SDHCI_CTRL_ADMA32 bit means ADMA2 is selected.
> + * Selection of 32-bit/64-bit System Addressing:
> + * either 32-bit or 64-bit system addressing is selected by
> + * 64-bit Addressing bit in Host Control 2 register.
> + *
> + * On the other hand the "DesignWare Cores Mobile Storage Host
> + * Controller DWC_mshc / DWC_mshc_lite User Guide" says, that we have to
> + * set DMA_SEL to ADMA2 _only_ mode in the Host Control 2 register.
> + */
> + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
> + ctrl &= ~SDHCI_CTRL_DMA_MASK;
> + ctrl |= SDHCI_CTRL_ADMA32;
> + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
> +}
> +
> +static void dwcmshc_set_tran_desc(struct cqhci_host *cq_host, u8 **desc,
> + dma_addr_t addr, int len, bool end, bool dma64)
> +{
> + int tmplen, offset;
> +
> + if (likely(!len || BOUNDARY_OK(addr, len))) {
> + cqhci_set_tran_desc(*desc, addr, len, end, dma64);
> + return;
> + }
> +
> + offset = addr & (SZ_128M - 1);
> + tmplen = SZ_128M - offset;
> + cqhci_set_tran_desc(*desc, addr, tmplen, false, dma64);
> +
> + addr += tmplen;
> + len -= tmplen;
> + *desc += cq_host->trans_desc_len;
> + cqhci_set_tran_desc(*desc, addr, len, end, dma64);
> +}
> +
> +static void dwcmshc_cqhci_dumpregs(struct mmc_host *mmc)
> +{
> + sdhci_dumpregs(mmc_priv(mmc));
> +}
> +
> static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock)
> {
> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> @@ -649,6 +743,7 @@ static const struct sdhci_ops sdhci_dwcmshc_ops = {
> .get_max_clock = dwcmshc_get_max_clock,
> .reset = sdhci_reset,
> .adma_write_desc = dwcmshc_adma_write_desc,
> + .irq = dwcmshc_cqe_irq_handler,
> };
>
> static const struct sdhci_ops sdhci_dwcmshc_rk35xx_ops = {
> @@ -700,6 +795,70 @@ static const struct sdhci_pltfm_data sdhci_dwcmshc_th1520_pdata = {
> .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
> };
>
> +static const struct cqhci_host_ops dwcmshc_cqhci_ops = {
> + .enable = dwcmshc_sdhci_cqe_enable,
> + .disable = sdhci_cqe_disable,
> + .dumpregs = dwcmshc_cqhci_dumpregs,
> + .set_tran_desc = dwcmshc_set_tran_desc,
> +};
> +
> +static void dwcmshc_cqhci_init(struct sdhci_host *host, struct platform_device *pdev)
> +{
> + struct cqhci_host *cq_host;
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct dwcmshc_priv *priv = sdhci_pltfm_priv(pltfm_host);
> + bool dma64 = false;
> + u16 clk;
> + int err;
> +
> + host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
> + cq_host = devm_kzalloc(&pdev->dev, sizeof(*cq_host), GFP_KERNEL);
> + if (!cq_host) {
> + dev_err(mmc_dev(host->mmc), "Unable to setup CQE: not enough memory\n");
> + return;
> + }
> +
> + /*
> + * For dwcmshc host controller we have to enable internal clock
> + * before access to some registers from Vendor Specific Area 2.
> + */
> + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> + clk |= SDHCI_CLOCK_INT_EN;
> + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
> + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> + if (!(clk & SDHCI_CLOCK_INT_EN)) {
> + dev_err(mmc_dev(host->mmc), "Unable to setup CQE: internal clock enable error\n");
> + goto free_cq_host;
> + }
> +
> + cq_host->mmio = host->ioaddr + priv->vendor_specific_area2;
> + cq_host->ops = &dwcmshc_cqhci_ops;
> +
> + /* Enable using of 128-bit task descriptors */
> + dma64 = host->flags & SDHCI_USE_64_BIT_DMA;
> + if (dma64) {
> + dev_dbg(mmc_dev(host->mmc), "128-bit task descriptors\n");
> + cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
> + }
> + err = cqhci_init(cq_host, host->mmc, dma64);
> + if (err) {
> + dev_err(mmc_dev(host->mmc), "Unable to setup CQE: error %d\n", err);
> + goto int_clock_disable;
> + }
> +
> + dev_dbg(mmc_dev(host->mmc), "CQE init done\n");
> +
> + return;
> +
> +int_clock_disable:
> + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> + clk &= ~SDHCI_CLOCK_INT_EN;
> + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
> +
> +free_cq_host:
> + devm_kfree(&pdev->dev, cq_host);
> +}
> +
> static int dwcmshc_rk35xx_init(struct sdhci_host *host, struct dwcmshc_priv *dwc_priv)
> {
> int err;
> @@ -796,7 +955,7 @@ static int dwcmshc_probe(struct platform_device *pdev)
> struct rk35xx_priv *rk_priv = NULL;
> const struct sdhci_pltfm_data *pltfm_data;
> int err;
> - u32 extra;
> + u32 extra, caps;
>
> pltfm_data = device_get_match_data(&pdev->dev);
> if (!pltfm_data) {
> @@ -847,6 +1006,7 @@ static int dwcmshc_probe(struct platform_device *pdev)
>
> host->mmc_host_ops.request = dwcmshc_request;
> host->mmc_host_ops.hs400_enhanced_strobe = dwcmshc_hs400_enhanced_strobe;
> + host->mmc_host_ops.execute_tuning = dwcmshc_execute_tuning;
>
> if (pltfm_data == &sdhci_dwcmshc_rk35xx_pdata) {
> rk_priv = devm_kzalloc(&pdev->dev, sizeof(struct rk35xx_priv), GFP_KERNEL);
> @@ -896,6 +1056,10 @@ static int dwcmshc_probe(struct platform_device *pdev)
> sdhci_enable_v4_mode(host);
> #endif
>
> + caps = sdhci_readl(host, SDHCI_CAPABILITIES);
> + if (caps & SDHCI_CAN_64BIT_V4)
> + sdhci_enable_v4_mode(host);
> +
> host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
>
> pm_runtime_get_noresume(dev);
> @@ -906,6 +1070,14 @@ static int dwcmshc_probe(struct platform_device *pdev)
> if (err)
> goto err_rpm;
>
> + /* Setup Command Queue Engine if enabled */
> + if (device_property_read_bool(&pdev->dev, "supports-cqe")) {
> + priv->vendor_specific_area2 =
> + sdhci_readw(host, DWCMSHC_P_VENDOR_AREA2);
> +
> + dwcmshc_cqhci_init(host, pdev);
If CQE init fails, you continue anyway, but MMC_CAP2_CQE is
still set, which would cause problems. Better to clear
MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD
> + }
> +
> if (rk_priv)
> dwcmshc_rk35xx_postinit(host, priv);
>
> @@ -961,6 +1133,12 @@ static int dwcmshc_suspend(struct device *dev)
>
> pm_runtime_resume(dev);
>
> + if (host->mmc->caps2 & MMC_CAP2_CQE) {
> + ret = cqhci_suspend(host->mmc);
> + if (ret)
> + return ret;
> + }
> +
> ret = sdhci_suspend_host(host);
> if (ret)
> return ret;
> @@ -1005,6 +1183,12 @@ static int dwcmshc_resume(struct device *dev)
> if (ret)
> goto disable_rockchip_clks;
>
> + if (host->mmc->caps2 & MMC_CAP2_CQE) {
> + ret = cqhci_resume(host->mmc);
> + if (ret)
> + goto disable_rockchip_clks;
> + }
> +
> return 0;
>
> disable_rockchip_clks:
From: Sergey Khimich <[email protected]>
There are could be specific limitations for some mmc
controllers for setting cqhci transfer descriptors.
So add callback to allow implement driver specific function.
Signed-off-by: Sergey Khimich <[email protected]>
---
drivers/mmc/host/cqhci-core.c | 11 ++++++++---
drivers/mmc/host/cqhci.h | 4 ++++
2 files changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/cqhci-core.c b/drivers/mmc/host/cqhci-core.c
index 41e94cd14109..c14d7251d0bb 100644
--- a/drivers/mmc/host/cqhci-core.c
+++ b/drivers/mmc/host/cqhci-core.c
@@ -474,8 +474,8 @@ static int cqhci_dma_map(struct mmc_host *host, struct mmc_request *mrq)
return sg_count;
}
-static void cqhci_set_tran_desc(u8 *desc, dma_addr_t addr, int len, bool end,
- bool dma64)
+void cqhci_set_tran_desc(u8 *desc, dma_addr_t addr, int len, bool end,
+ bool dma64)
{
__le32 *attr = (__le32 __force *)desc;
@@ -495,6 +495,7 @@ static void cqhci_set_tran_desc(u8 *desc, dma_addr_t addr, int len, bool end,
dataddr[0] = cpu_to_le32(addr);
}
}
+EXPORT_SYMBOL(cqhci_set_tran_desc);
static int cqhci_prep_tran_desc(struct mmc_request *mrq,
struct cqhci_host *cq_host, int tag)
@@ -522,7 +523,11 @@ static int cqhci_prep_tran_desc(struct mmc_request *mrq,
if ((i+1) == sg_count)
end = true;
- cqhci_set_tran_desc(desc, addr, len, end, dma64);
+ if (cq_host->ops->set_tran_desc)
+ cq_host->ops->set_tran_desc(cq_host, &desc, addr, len, end, dma64);
+ else
+ cqhci_set_tran_desc(desc, addr, len, end, dma64);
+
desc += cq_host->trans_desc_len;
}
diff --git a/drivers/mmc/host/cqhci.h b/drivers/mmc/host/cqhci.h
index 1a12e40a02e6..fab9d74445ba 100644
--- a/drivers/mmc/host/cqhci.h
+++ b/drivers/mmc/host/cqhci.h
@@ -293,6 +293,9 @@ struct cqhci_host_ops {
int (*program_key)(struct cqhci_host *cq_host,
const union cqhci_crypto_cfg_entry *cfg, int slot);
#endif
+ void (*set_tran_desc)(struct cqhci_host *cq_host, u8 **desc,
+ dma_addr_t addr, int len, bool end, bool dma64);
+
};
static inline void cqhci_writel(struct cqhci_host *host, u32 val, int reg)
@@ -318,6 +321,7 @@ irqreturn_t cqhci_irq(struct mmc_host *mmc, u32 intmask, int cmd_error,
int cqhci_init(struct cqhci_host *cq_host, struct mmc_host *mmc, bool dma64);
struct cqhci_host *cqhci_pltfm_init(struct platform_device *pdev);
int cqhci_deactivate(struct mmc_host *mmc);
+void cqhci_set_tran_desc(u8 *desc, dma_addr_t addr, int len, bool end, bool dma64);
static inline int cqhci_suspend(struct mmc_host *mmc)
{
return cqhci_deactivate(mmc);
--
2.30.2
On Thu, 14 Mar 2024 at 15:14, Sergey Khimich <[email protected]> wrote:
>
> Hello!
>
> This is implementation of SDHCI CQE support for sdhci-of-dwcmshc driver.
> For enabling CQE support just set 'supports-cqe' in your DevTree file
> for appropriate mmc node.
>
> Also, while implementing CQE support for the driver, I faced with a problem
> which I will describe below.
> According to the IP block documentation CQE works only with "AMDA-2 only"
> mode which is activated only with v4 mode enabled. I see in dwcmshc_probe()
> function that v4 mode gets enabled only for 'sdhci_dwcmshc_bf3_pdata'
> platform data.
>
> So my question is: is it correct to enable v4 mode for all platform data
> if 'SDHCI_CAN_64BIT_V4' bit is set in hw?
>
> Because I`m afraid that enabling v4 mode for some platforms could break
> them down. On the other hand, if host controller says that it can do v4
> (caps & SDHCI_CAN_64BIT_V4), lets do v4 or disable it manualy by some
> quirk. Anyway - RFC.
>
We have just updated the bouncing addresses in MAINTAINERS for Asutosh
Das and Ritesh Harjani, that also helps maintain cqhci. Would you mind
re-submitting to allow them to have a look at this too?
Asutosh Das <[email protected]>
Ritesh Harjani <[email protected]>
Kind regards
Uffe
>
> v2:
> - Added dwcmshc specific cqe_disable hook to prevent losing
> in-flight cmd when an ioctl is issued and cqe_disable is called;
>
> - Added processing 128Mb boundary for the host memory data buffer size
> and the data buffer. For implementing this processing an extra
> callback is added to the struct 'sdhci_ops'.
>
> - Fixed typo.
>
> v3:
> - Fix warning reported by kernel test robot:
> | Reported-by: kernel test robot <[email protected]>
> | Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
> | Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
>
> v4:
> - Data reset moved to custom driver tuning hook.
> - Removed unnecessary dwcmshc_sdhci_cqe_disable() func
> - Removed unnecessary dwcmshc_cqhci_set_tran_desc. Export and use
> cqhci_set_tran_desc() instead.
> - Provide a hook for cqhci_set_tran_desc() instead of cqhci_prep_tran_desc().
> - Fix typo: int_clok_disable --> int_clock_disable
>
> v5:
> - Fix warning reported by kernel test robot:
> | Reported-by: kernel test robot <[email protected]>
> | Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
>
> v6:
> - Rebase to master branch
> - Fix typo;
> - Fix double blank line;
> - Add cqhci_suspend() and cqhci_resume() functions
> to support mmc suspend-to-ram (s2r);
> - Move reading DWCMSHC_P_VENDOR_AREA2 register under "supports-cqe"
> condition as not all IPs have that register;
> - Remove sdhci V4 mode from the list of prerequisites to init cqhci.
>
>
> Sergey Khimich (2):
> mmc: cqhci: Add cqhci set_tran_desc() callback
> mmc: sdhci-of-dwcmshc: Implement SDHCI CQE support
>
> drivers/mmc/host/Kconfig | 1 +
> drivers/mmc/host/cqhci-core.c | 11 +-
> drivers/mmc/host/cqhci.h | 4 +
> drivers/mmc/host/sdhci-of-dwcmshc.c | 188 +++++++++++++++++++++++++++-
> 4 files changed, 199 insertions(+), 5 deletions(-)
>
> --
> 2.30.2
>
Hello, Uffe!
Thanks for the info! I'll update mailing list in the next v7 version of
my patch set. I'll send it anyway to fix last comments from Adrian Hunter.
On 15.03.2024 13:55, Ulf Hansson wrote:
> On Thu, 14 Mar 2024 at 15:14, Sergey Khimich <[email protected]> wrote:
>> Hello!
>>
>> This is implementation of SDHCI CQE support for sdhci-of-dwcmshc driver.
>> For enabling CQE support just set 'supports-cqe' in your DevTree file
>> for appropriate mmc node.
>>
>> Also, while implementing CQE support for the driver, I faced with a problem
>> which I will describe below.
>> According to the IP block documentation CQE works only with "AMDA-2 only"
>> mode which is activated only with v4 mode enabled. I see in dwcmshc_probe()
>> function that v4 mode gets enabled only for 'sdhci_dwcmshc_bf3_pdata'
>> platform data.
>>
>> So my question is: is it correct to enable v4 mode for all platform data
>> if 'SDHCI_CAN_64BIT_V4' bit is set in hw?
>>
>> Because I`m afraid that enabling v4 mode for some platforms could break
>> them down. On the other hand, if host controller says that it can do v4
>> (caps & SDHCI_CAN_64BIT_V4), lets do v4 or disable it manualy by some
>> quirk. Anyway - RFC.
>>
> We have just updated the bouncing addresses in MAINTAINERS for Asutosh
> Das and Ritesh Harjani, that also helps maintain cqhci. Would you mind
> re-submitting to allow them to have a look at this too?
> Asutosh Das <[email protected]>
> Ritesh Harjani <[email protected]>
>
> Kind regards
> Uffe
>
>> v2:
>> - Added dwcmshc specific cqe_disable hook to prevent losing
>> in-flight cmd when an ioctl is issued and cqe_disable is called;
>>
>> - Added processing 128Mb boundary for the host memory data buffer size
>> and the data buffer. For implementing this processing an extra
>> callback is added to the struct 'sdhci_ops'.
>>
>> - Fixed typo.
>>
>> v3:
>> - Fix warning reported by kernel test robot:
>> | Reported-by: kernel test robot <[email protected]>
>> | Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
>> | Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
>>
>> v4:
>> - Data reset moved to custom driver tuning hook.
>> - Removed unnecessary dwcmshc_sdhci_cqe_disable() func
>> - Removed unnecessary dwcmshc_cqhci_set_tran_desc. Export and use
>> cqhci_set_tran_desc() instead.
>> - Provide a hook for cqhci_set_tran_desc() instead of cqhci_prep_tran_desc().
>> - Fix typo: int_clok_disable --> int_clock_disable
>>
>> v5:
>> - Fix warning reported by kernel test robot:
>> | Reported-by: kernel test robot <[email protected]>
>> | Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
>>
>> v6:
>> - Rebase to master branch
>> - Fix typo;
>> - Fix double blank line;
>> - Add cqhci_suspend() and cqhci_resume() functions
>> to support mmc suspend-to-ram (s2r);
>> - Move reading DWCMSHC_P_VENDOR_AREA2 register under "supports-cqe"
>> condition as not all IPs have that register;
>> - Remove sdhci V4 mode from the list of prerequisites to init cqhci.
>>
>>
>> Sergey Khimich (2):
>> mmc: cqhci: Add cqhci set_tran_desc() callback
>> mmc: sdhci-of-dwcmshc: Implement SDHCI CQE support
>>
>> drivers/mmc/host/Kconfig | 1 +
>> drivers/mmc/host/cqhci-core.c | 11 +-
>> drivers/mmc/host/cqhci.h | 4 +
>> drivers/mmc/host/sdhci-of-dwcmshc.c | 188 +++++++++++++++++++++++++++-
>> 4 files changed, 199 insertions(+), 5 deletions(-)
>>
>> --
>> 2.30.2
>>