LinuxLists.cc - [PATCH] perf top & record: Fix segfault when default cycles event is not supported

2023-06-14 15:23:37

Subject: [PATCH] perf top & record: Fix segfault when default cycles event is not supported

The perf-record and perf-top call parse_event() to add a cycles event to
an empty evlist. For the system that does not support hardware cycles
event, such as QEMU, the evlist is empty due to the following code process:

parse_event(evlist, "cycles:P" or ""cycles:Pu")
parse_events(evlist, "cycles:P")
__parse_events
...
ret = parse_events__scanner(str, &parse_state);
// ret = 0
...
ret2 = parse_events__sort_events_and_fix_groups()
if (ret2 < 0)
return ret;
// The cycles event is not supported, here ret2 = -EINVAL,
// Here return 0.
...
evlist__splice_list_tail(evlist)
// The code here does not execute to, so the evlist is still empty.

A null pointer occurs when the content in the evlist is accessed later.

Before:

# perf list hw

List of pre-defined events (to be used in -e or -M):

# perf record true
libperf: Miscounted nr_mmaps 0 vs 1
WARNING: No sample_id_all support, falling back to unordered processing
perf: Segmentation fault
Obtained 1 stack frames.
[0xc5beff]
Segmentation fault

Solution:
If cycles event is not supported, try to fall back to cpu-clock event.

After:
# perf record true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.006 MB perf.data ]
#

Fixes: 7b100989b4f6 ("perf evlist: Remove __evlist__add_default")
Signed-off-by: Yang Jihong <[email protected]>
---
tools/perf/builtin-record.c | 4 +---
tools/perf/builtin-top.c | 3 +--
tools/perf/util/evlist.c | 18 ++++++++++++++++++
tools/perf/util/evlist.h | 1 +
4 files changed, 21 insertions(+), 5 deletions(-)

diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index aec18db7ff23..29ae2b84a63a 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -4161,9 +4161,7 @@ int cmd_record(int argc, const char **argv)
record.opts.tail_synthesize = true;

if (rec->evlist->core.nr_entries == 0) {
- bool can_profile_kernel = perf_event_paranoid_check(1);
-
- err = parse_event(rec->evlist, can_profile_kernel ? "cycles:P" : "cycles:Pu");
+ err = evlist__add_default(rec->evlist);
if (err)
goto out;
}
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index c363c04e16df..798cb9252a5f 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -1665,8 +1665,7 @@ int cmd_top(int argc, const char **argv)
goto out_delete_evlist;

if (!top.evlist->core.nr_entries) {
- bool can_profile_kernel = perf_event_paranoid_check(1);
- int err = parse_event(top.evlist, can_profile_kernel ? "cycles:P" : "cycles:Pu");
+ int err = evlist__add_default(top.evlist);

if (err)
goto out_delete_evlist;
diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
index 7ef43f72098e..60efa762405e 100644
--- a/tools/perf/util/evlist.c
+++ b/tools/perf/util/evlist.c
@@ -287,6 +287,24 @@ struct evsel *evlist__add_aux_dummy(struct evlist *evlist, bool system_wide)
return evsel;
}

+int evlist__add_default(struct evlist *evlist)
+{
+ bool can_profile_kernel;
+ int err;
+
+ can_profile_kernel = perf_event_paranoid_check(1);
+ err = parse_event(evlist, can_profile_kernel ? "cycles:P" : "cycles:Pu");
+ if (err)
+ return err;
+
+ if (!evlist->core.nr_entries) {
+ pr_debug("The cycles event is not supported, trying to fall back to cpu-clock event\n");
+ return parse_event(evlist, "cpu-clock");
+ }
+
+ return 0;
+}
+
#ifdef HAVE_LIBTRACEEVENT
struct evsel *evlist__add_sched_switch(struct evlist *evlist, bool system_wide)
{
diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
index 664c6bf7b3e0..47eea809ee91 100644
--- a/tools/perf/util/evlist.h
+++ b/tools/perf/util/evlist.h
@@ -116,6 +116,7 @@ int arch_evlist__cmp(const struct evsel *lhs, const struct evsel *rhs);

int evlist__add_dummy(struct evlist *evlist);
struct evsel *evlist__add_aux_dummy(struct evlist *evlist, bool system_wide);
+int evlist__add_default(struct evlist *evlist);
static inline struct evsel *evlist__add_dummy_on_all_cpus(struct evlist *evlist)
{
return evlist__add_aux_dummy(evlist, true);
--
2.30.GIT

2023-06-14 16:35:54

by Ian Rogers

[permalink] [raw]

Subject: Re: [PATCH] perf top & record: Fix segfault when default cycles event is not supported

On Wed, Jun 14, 2023 at 8:18 AM Yang Jihong <[email protected]> wrote:
>
> The perf-record and perf-top call parse_event() to add a cycles event to
> an empty evlist. For the system that does not support hardware cycles
> event, such as QEMU, the evlist is empty due to the following code process:
>
> parse_event(evlist, "cycles:P" or ""cycles:Pu")
> parse_events(evlist, "cycles:P")
> __parse_events
> ...
> ret = parse_events__scanner(str, &parse_state);
> // ret = 0
> ...
> ret2 = parse_events__sort_events_and_fix_groups()
> if (ret2 < 0)
> return ret;
> // The cycles event is not supported, here ret2 = -EINVAL,
> // Here return 0.
> ...
> evlist__splice_list_tail(evlist)
> // The code here does not execute to, so the evlist is still empty.
>
> A null pointer occurs when the content in the evlist is accessed later.
>
> Before:
>
> # perf list hw
>
> List of pre-defined events (to be used in -e or -M):
>
> # perf record true
> libperf: Miscounted nr_mmaps 0 vs 1
> WARNING: No sample_id_all support, falling back to unordered processing
> perf: Segmentation fault
> Obtained 1 stack frames.
> [0xc5beff]
> Segmentation fault
>
> Solution:
> If cycles event is not supported, try to fall back to cpu-clock event.
>
> After:
> # perf record true
> [ perf record: Woken up 1 times to write data ]
> [ perf record: Captured and wrote 0.006 MB perf.data ]
> #
>
> Fixes: 7b100989b4f6 ("perf evlist: Remove __evlist__add_default")
> Signed-off-by: Yang Jihong <[email protected]>

Thanks, useful addition. The cpu-clock fall back wasn't present before
7b100989b4f6 so is the fixes tag correct?

Wrt segv, I'm beginning to think that we should always forcibly create
a core PMU even if we can't find one one in sysfs, my guess is that is
what triggers the segv.

evlist__add_default doesn't really explain what the function is doing
and default can have >1 meaning. Perhaps, evlist__add_cycles.

Thanks,
Ian

> ---
> tools/perf/builtin-record.c | 4 +---
> tools/perf/builtin-top.c | 3 +--
> tools/perf/util/evlist.c | 18 ++++++++++++++++++
> tools/perf/util/evlist.h | 1 +
> 4 files changed, 21 insertions(+), 5 deletions(-)
>
> diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
> index aec18db7ff23..29ae2b84a63a 100644
> --- a/tools/perf/builtin-record.c
> +++ b/tools/perf/builtin-record.c
> @@ -4161,9 +4161,7 @@ int cmd_record(int argc, const char **argv)
> record.opts.tail_synthesize = true;
>
> if (rec->evlist->core.nr_entries == 0) {
> - bool can_profile_kernel = perf_event_paranoid_check(1);
> -
> - err = parse_event(rec->evlist, can_profile_kernel ? "cycles:P" : "cycles:Pu");
> + err = evlist__add_default(rec->evlist);
> if (err)
> goto out;
> }
> diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
> index c363c04e16df..798cb9252a5f 100644
> --- a/tools/perf/builtin-top.c
> +++ b/tools/perf/builtin-top.c
> @@ -1665,8 +1665,7 @@ int cmd_top(int argc, const char **argv)
> goto out_delete_evlist;
>
> if (!top.evlist->core.nr_entries) {
> - bool can_profile_kernel = perf_event_paranoid_check(1);
> - int err = parse_event(top.evlist, can_profile_kernel ? "cycles:P" : "cycles:Pu");
> + int err = evlist__add_default(top.evlist);
>
> if (err)
> goto out_delete_evlist;
> diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
> index 7ef43f72098e..60efa762405e 100644
> --- a/tools/perf/util/evlist.c
> +++ b/tools/perf/util/evlist.c
> @@ -287,6 +287,24 @@ struct evsel *evlist__add_aux_dummy(struct evlist *evlist, bool system_wide)
> return evsel;
> }
>
> +int evlist__add_default(struct evlist *evlist)
> +{
> + bool can_profile_kernel;
> + int err;
> +
> + can_profile_kernel = perf_event_paranoid_check(1);
> + err = parse_event(evlist, can_profile_kernel ? "cycles:P" : "cycles:Pu");
> + if (err)
> + return err;
> +
> + if (!evlist->core.nr_entries) {
> + pr_debug("The cycles event is not supported, trying to fall back to cpu-clock event\n");
> + return parse_event(evlist, "cpu-clock");
> + }
> +
> + return 0;
> +}
> +
> #ifdef HAVE_LIBTRACEEVENT
> struct evsel *evlist__add_sched_switch(struct evlist *evlist, bool system_wide)
> {
> diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
> index 664c6bf7b3e0..47eea809ee91 100644
> --- a/tools/perf/util/evlist.h
> +++ b/tools/perf/util/evlist.h
> @@ -116,6 +116,7 @@ int arch_evlist__cmp(const struct evsel *lhs, const struct evsel *rhs);
>
> int evlist__add_dummy(struct evlist *evlist);
> struct evsel *evlist__add_aux_dummy(struct evlist *evlist, bool system_wide);
> +int evlist__add_default(struct evlist *evlist);
> static inline struct evsel *evlist__add_dummy_on_all_cpus(struct evlist *evlist)
> {
> return evlist__add_aux_dummy(evlist, true);
> --
> 2.30.GIT
>

2023-06-14 22:59:11

by Ian Rogers

[permalink] [raw]

Subject: Re: [PATCH] perf top & record: Fix segfault when default cycles event is not supported

On Wed, Jun 14, 2023 at 9:18 AM Ian Rogers <[email protected]> wrote:
>
> On Wed, Jun 14, 2023 at 8:18 AM Yang Jihong <[email protected]> wrote:
> >
> > The perf-record and perf-top call parse_event() to add a cycles event to
> > an empty evlist. For the system that does not support hardware cycles
> > event, such as QEMU, the evlist is empty due to the following code process:
> >
> > parse_event(evlist, "cycles:P" or ""cycles:Pu")
> > parse_events(evlist, "cycles:P")
> > __parse_events
> > ...
> > ret = parse_events__scanner(str, &parse_state);
> > // ret = 0
> > ...
> > ret2 = parse_events__sort_events_and_fix_groups()
> > if (ret2 < 0)
> > return ret;
> > // The cycles event is not supported, here ret2 = -EINVAL,
> > // Here return 0.
> > ...
> > evlist__splice_list_tail(evlist)
> > // The code here does not execute to, so the evlist is still empty.
> >
> > A null pointer occurs when the content in the evlist is accessed later.
> >
> > Before:
> >
> > # perf list hw
> >
> > List of pre-defined events (to be used in -e or -M):
> >
> > # perf record true
> > libperf: Miscounted nr_mmaps 0 vs 1
> > WARNING: No sample_id_all support, falling back to unordered processing
> > perf: Segmentation fault
> > Obtained 1 stack frames.
> > [0xc5beff]
> > Segmentation fault
> >
> > Solution:
> > If cycles event is not supported, try to fall back to cpu-clock event.
> >
> > After:
> > # perf record true
> > [ perf record: Woken up 1 times to write data ]
> > [ perf record: Captured and wrote 0.006 MB perf.data ]
> > #
> >
> > Fixes: 7b100989b4f6 ("perf evlist: Remove __evlist__add_default")
> > Signed-off-by: Yang Jihong <[email protected]>
>
> Thanks, useful addition. The cpu-clock fall back wasn't present before
> 7b100989b4f6 so is the fixes tag correct?

Hmm... it should be coming from evsel__fallback:
https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/util/evsel.c?h=tmp.perf-tools-next#n2840
so we shouldn't duplicate that logic. The question is why we're not
doing the fallback.

Thanks,
Ian

> Wrt segv, I'm beginning to think that we should always forcibly create
> a core PMU even if we can't find one one in sysfs, my guess is that is
> what triggers the segv.
>
> evlist__add_default doesn't really explain what the function is doing
> and default can have >1 meaning. Perhaps, evlist__add_cycles.
>
> Thanks,
> Ian
>
> > ---
> > tools/perf/builtin-record.c | 4 +---
> > tools/perf/builtin-top.c | 3 +--
> > tools/perf/util/evlist.c | 18 ++++++++++++++++++
> > tools/perf/util/evlist.h | 1 +
> > 4 files changed, 21 insertions(+), 5 deletions(-)
> >
> > diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
> > index aec18db7ff23..29ae2b84a63a 100644
> > --- a/tools/perf/builtin-record.c
> > +++ b/tools/perf/builtin-record.c
> > @@ -4161,9 +4161,7 @@ int cmd_record(int argc, const char **argv)
> > record.opts.tail_synthesize = true;
> >
> > if (rec->evlist->core.nr_entries == 0) {
> > - bool can_profile_kernel = perf_event_paranoid_check(1);
> > -
> > - err = parse_event(rec->evlist, can_profile_kernel ? "cycles:P" : "cycles:Pu");
> > + err = evlist__add_default(rec->evlist);
> > if (err)
> > goto out;
> > }
> > diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
> > index c363c04e16df..798cb9252a5f 100644
> > --- a/tools/perf/builtin-top.c
> > +++ b/tools/perf/builtin-top.c
> > @@ -1665,8 +1665,7 @@ int cmd_top(int argc, const char **argv)
> > goto out_delete_evlist;
> >
> > if (!top.evlist->core.nr_entries) {
> > - bool can_profile_kernel = perf_event_paranoid_check(1);
> > - int err = parse_event(top.evlist, can_profile_kernel ? "cycles:P" : "cycles:Pu");
> > + int err = evlist__add_default(top.evlist);
> >
> > if (err)
> > goto out_delete_evlist;
> > diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
> > index 7ef43f72098e..60efa762405e 100644
> > --- a/tools/perf/util/evlist.c
> > +++ b/tools/perf/util/evlist.c
> > @@ -287,6 +287,24 @@ struct evsel *evlist__add_aux_dummy(struct evlist *evlist, bool system_wide)
> > return evsel;
> > }
> >
> > +int evlist__add_default(struct evlist *evlist)
> > +{
> > + bool can_profile_kernel;
> > + int err;
> > +
> > + can_profile_kernel = perf_event_paranoid_check(1);
> > + err = parse_event(evlist, can_profile_kernel ? "cycles:P" : "cycles:Pu");
> > + if (err)
> > + return err;
> > +
> > + if (!evlist->core.nr_entries) {
> > + pr_debug("The cycles event is not supported, trying to fall back to cpu-clock event\n");
> > + return parse_event(evlist, "cpu-clock");
> > + }
> > +
> > + return 0;
> > +}
> > +
> > #ifdef HAVE_LIBTRACEEVENT
> > struct evsel *evlist__add_sched_switch(struct evlist *evlist, bool system_wide)
> > {
> > diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
> > index 664c6bf7b3e0..47eea809ee91 100644
> > --- a/tools/perf/util/evlist.h
> > +++ b/tools/perf/util/evlist.h
> > @@ -116,6 +116,7 @@ int arch_evlist__cmp(const struct evsel *lhs, const struct evsel *rhs);
> >
> > int evlist__add_dummy(struct evlist *evlist);
> > struct evsel *evlist__add_aux_dummy(struct evlist *evlist, bool system_wide);
> > +int evlist__add_default(struct evlist *evlist);
> > static inline struct evsel *evlist__add_dummy_on_all_cpus(struct evlist *evlist)
> > {
> > return evlist__add_aux_dummy(evlist, true);
> > --
> > 2.30.GIT
> >

2023-06-15 02:15:42

by Yang Jihong

[permalink] [raw]

Subject: Re: [PATCH] perf top & record: Fix segfault when default cycles event is not supported

Hello,

On 2023/6/15 0:18, Ian Rogers wrote:
> On Wed, Jun 14, 2023 at 8:18 AM Yang Jihong <[email protected]> wrote:
>>
>> The perf-record and perf-top call parse_event() to add a cycles event to
>> an empty evlist. For the system that does not support hardware cycles
>> event, such as QEMU, the evlist is empty due to the following code process:
>>
>> parse_event(evlist, "cycles:P" or ""cycles:Pu")
>> parse_events(evlist, "cycles:P")
>> __parse_events
>> ...
>> ret = parse_events__scanner(str, &parse_state);
>> // ret = 0
>> ...
>> ret2 = parse_events__sort_events_and_fix_groups()
>> if (ret2 < 0)
>> return ret;
>> // The cycles event is not supported, here ret2 = -EINVAL,
>> // Here return 0.
>> ...
>> evlist__splice_list_tail(evlist)
>> // The code here does not execute to, so the evlist is still empty.
>>
>> A null pointer occurs when the content in the evlist is accessed later.
>>
>> Before:
>>
>> # perf list hw
>>
>> List of pre-defined events (to be used in -e or -M):
>>
>> # perf record true
>> libperf: Miscounted nr_mmaps 0 vs 1
>> WARNING: No sample_id_all support, falling back to unordered processing
>> perf: Segmentation fault
>> Obtained 1 stack frames.
>> [0xc5beff]
>> Segmentation fault
>>
>> Solution:
>> If cycles event is not supported, try to fall back to cpu-clock event.
>>
>> After:
>> # perf record true
>> [ perf record: Woken up 1 times to write data ]
>> [ perf record: Captured and wrote 0.006 MB perf.data ]
>> #
>>
>> Fixes: 7b100989b4f6 ("perf evlist: Remove __evlist__add_default")
>> Signed-off-by: Yang Jihong <[email protected]>
>
> Thanks, useful addition. The cpu-clock fall back wasn't present before
> 7b100989b4f6 so is the fixes tag correct?
>
Before 7b100989b4f6, perf-record call evlist__add_default() to create an
evsel and directly add it to the evlist, it does not search for the
corresponding PMU in the sysfs. Therefore, the evlist is not empty
before the commit 7b100989b4f6.

> Wrt segv, I'm beginning to think that we should always forcibly create
> a core PMU even if we can't find one one in sysfs, my guess is that is
> what triggers the segv.
>

Yes, that's the reason.

Thanks,
Yang.

> evlist__add_default doesn't really explain what the function is doing
> and default can have >1 meaning. Perhaps, evlist__add_cycles.
>
> Thanks,
> Ian
>
>> ---
>> tools/perf/builtin-record.c | 4 +---
>> tools/perf/builtin-top.c | 3 +--
>> tools/perf/util/evlist.c | 18 ++++++++++++++++++
>> tools/perf/util/evlist.h | 1 +
>> 4 files changed, 21 insertions(+), 5 deletions(-)
>>
>> diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
>> index aec18db7ff23..29ae2b84a63a 100644
>> --- a/tools/perf/builtin-record.c
>> +++ b/tools/perf/builtin-record.c
>> @@ -4161,9 +4161,7 @@ int cmd_record(int argc, const char **argv)
>> record.opts.tail_synthesize = true;
>>
>> if (rec->evlist->core.nr_entries == 0) {
>> - bool can_profile_kernel = perf_event_paranoid_check(1);
>> -
>> - err = parse_event(rec->evlist, can_profile_kernel ? "cycles:P" : "cycles:Pu");
>> + err = evlist__add_default(rec->evlist);
>> if (err)
>> goto out;
>> }
>> diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
>> index c363c04e16df..798cb9252a5f 100644
>> --- a/tools/perf/builtin-top.c
>> +++ b/tools/perf/builtin-top.c
>> @@ -1665,8 +1665,7 @@ int cmd_top(int argc, const char **argv)
>> goto out_delete_evlist;
>>
>> if (!top.evlist->core.nr_entries) {
>> - bool can_profile_kernel = perf_event_paranoid_check(1);
>> - int err = parse_event(top.evlist, can_profile_kernel ? "cycles:P" : "cycles:Pu");
>> + int err = evlist__add_default(top.evlist);
>>
>> if (err)
>> goto out_delete_evlist;
>> diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
>> index 7ef43f72098e..60efa762405e 100644
>> --- a/tools/perf/util/evlist.c
>> +++ b/tools/perf/util/evlist.c
>> @@ -287,6 +287,24 @@ struct evsel *evlist__add_aux_dummy(struct evlist *evlist, bool system_wide)
>> return evsel;
>> }
>>
>> +int evlist__add_default(struct evlist *evlist)
>> +{
>> + bool can_profile_kernel;
>> + int err;
>> +
>> + can_profile_kernel = perf_event_paranoid_check(1);
>> + err = parse_event(evlist, can_profile_kernel ? "cycles:P" : "cycles:Pu");
>> + if (err)
>> + return err;
>> +
>> + if (!evlist->core.nr_entries) {
>> + pr_debug("The cycles event is not supported, trying to fall back to cpu-clock event\n");
>> + return parse_event(evlist, "cpu-clock");
>> + }
>> +
>> + return 0;
>> +}
>> +
>> #ifdef HAVE_LIBTRACEEVENT
>> struct evsel *evlist__add_sched_switch(struct evlist *evlist, bool system_wide)
>> {
>> diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
>> index 664c6bf7b3e0..47eea809ee91 100644
>> --- a/tools/perf/util/evlist.h
>> +++ b/tools/perf/util/evlist.h
>> @@ -116,6 +116,7 @@ int arch_evlist__cmp(const struct evsel *lhs, const struct evsel *rhs);
>>
>> int evlist__add_dummy(struct evlist *evlist);
>> struct evsel *evlist__add_aux_dummy(struct evlist *evlist, bool system_wide);
>> +int evlist__add_default(struct evlist *evlist);
>> static inline struct evsel *evlist__add_dummy_on_all_cpus(struct evlist *evlist)
>> {
>> return evlist__add_aux_dummy(evlist, true);
>> --
>> 2.30.GIT
>>
> .
>

2023-06-15 02:17:32

by Yang Jihong

[permalink] [raw]

Subject: Re: [PATCH] perf top & record: Fix segfault when default cycles event is not supported

Hello,

On 2023/6/15 6:03, Ian Rogers wrote:
> On Wed, Jun 14, 2023 at 9:18 AM Ian Rogers <[email protected]> wrote:
>>
>> On Wed, Jun 14, 2023 at 8:18 AM Yang Jihong <[email protected]> wrote:
>>>
>>> The perf-record and perf-top call parse_event() to add a cycles event to
>>> an empty evlist. For the system that does not support hardware cycles
>>> event, such as QEMU, the evlist is empty due to the following code process:
>>>
>>> parse_event(evlist, "cycles:P" or ""cycles:Pu")
>>> parse_events(evlist, "cycles:P")
>>> __parse_events
>>> ...
>>> ret = parse_events__scanner(str, &parse_state);
>>> // ret = 0
>>> ...
>>> ret2 = parse_events__sort_events_and_fix_groups()
>>> if (ret2 < 0)
>>> return ret;
>>> // The cycles event is not supported, here ret2 = -EINVAL,
>>> // Here return 0.
>>> ...
>>> evlist__splice_list_tail(evlist)
>>> // The code here does not execute to, so the evlist is still empty.
>>>
>>> A null pointer occurs when the content in the evlist is accessed later.
>>>
>>> Before:
>>>
>>> # perf list hw
>>>
>>> List of pre-defined events (to be used in -e or -M):
>>>
>>> # perf record true
>>> libperf: Miscounted nr_mmaps 0 vs 1
>>> WARNING: No sample_id_all support, falling back to unordered processing
>>> perf: Segmentation fault
>>> Obtained 1 stack frames.
>>> [0xc5beff]
>>> Segmentation fault
>>>
>>> Solution:
>>> If cycles event is not supported, try to fall back to cpu-clock event.
>>>
>>> After:
>>> # perf record true
>>> [ perf record: Woken up 1 times to write data ]
>>> [ perf record: Captured and wrote 0.006 MB perf.data ]
>>> #
>>>
>>> Fixes: 7b100989b4f6 ("perf evlist: Remove __evlist__add_default")
>>> Signed-off-by: Yang Jihong <[email protected]>
>>
>> Thanks, useful addition. The cpu-clock fall back wasn't present before
>> 7b100989b4f6 so is the fixes tag correct?
>
> Hmm... it should be coming from evsel__fallback:
> https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/util/evsel.c?h=tmp.perf-tools-next#n2840
> so we shouldn't duplicate that logic. The question is why we're not
> doing the fallback.
>

Yes, it's a bit of the same logic as evsel__fallback, or we can call
evlist__add_default() as before, simply create an evsel of hardware
cycles and add it directly to evlist.

Please confirm whether this solution is feasible. If it is feasible, I
will send a v2 version.

Thanks,
Yang

2023-06-15 02:57:25

by Ian Rogers

[permalink] [raw]

Subject: Re: [PATCH] perf top & record: Fix segfault when default cycles event is not supported

On Wed, Jun 14, 2023 at 6:55 PM Yang Jihong <[email protected]> wrote:
>
> Hello,
>
> On 2023/6/15 6:03, Ian Rogers wrote:
> > On Wed, Jun 14, 2023 at 9:18 AM Ian Rogers <[email protected]> wrote:
> >>
> >> On Wed, Jun 14, 2023 at 8:18 AM Yang Jihong <[email protected]> wrote:
> >>>
> >>> The perf-record and perf-top call parse_event() to add a cycles event to
> >>> an empty evlist. For the system that does not support hardware cycles
> >>> event, such as QEMU, the evlist is empty due to the following code process:
> >>>
> >>> parse_event(evlist, "cycles:P" or ""cycles:Pu")
> >>> parse_events(evlist, "cycles:P")
> >>> __parse_events
> >>> ...
> >>> ret = parse_events__scanner(str, &parse_state);
> >>> // ret = 0
> >>> ...
> >>> ret2 = parse_events__sort_events_and_fix_groups()
> >>> if (ret2 < 0)
> >>> return ret;
> >>> // The cycles event is not supported, here ret2 = -EINVAL,
> >>> // Here return 0.
> >>> ...
> >>> evlist__splice_list_tail(evlist)
> >>> // The code here does not execute to, so the evlist is still empty.
> >>>
> >>> A null pointer occurs when the content in the evlist is accessed later.
> >>>
> >>> Before:
> >>>
> >>> # perf list hw
> >>>
> >>> List of pre-defined events (to be used in -e or -M):
> >>>
> >>> # perf record true
> >>> libperf: Miscounted nr_mmaps 0 vs 1
> >>> WARNING: No sample_id_all support, falling back to unordered processing
> >>> perf: Segmentation fault
> >>> Obtained 1 stack frames.
> >>> [0xc5beff]
> >>> Segmentation fault
> >>>
> >>> Solution:
> >>> If cycles event is not supported, try to fall back to cpu-clock event.
> >>>
> >>> After:
> >>> # perf record true
> >>> [ perf record: Woken up 1 times to write data ]
> >>> [ perf record: Captured and wrote 0.006 MB perf.data ]
> >>> #
> >>>
> >>> Fixes: 7b100989b4f6 ("perf evlist: Remove __evlist__add_default")
> >>> Signed-off-by: Yang Jihong <[email protected]>
> >>
> >> Thanks, useful addition. The cpu-clock fall back wasn't present before
> >> 7b100989b4f6 so is the fixes tag correct?
> >
> > Hmm... it should be coming from evsel__fallback:
> > https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/util/evsel.c?h=tmp.perf-tools-next#n2840
> > so we shouldn't duplicate that logic. The question is why we're not
> > doing the fallback.
> >
>
> Yes, it's a bit of the same logic as evsel__fallback, or we can call
> evlist__add_default() as before, simply create an evsel of hardware
> cycles and add it directly to evlist.
>
> Please confirm whether this solution is feasible. If it is feasible, I
> will send a v2 version.

The previous evlist__add_default logic didn't handle wildcard PMUs for
cycles, hence wanting to reuse the parse events logic. The error is
that the logic now isn't doing the fallback properly. I think an
evlist__add_cycles which uses evsel__fallback makes sense matching the
previous logic. I'd be happy if you took a look. I'll write a patch so
that the perf_pmus list of core PMUs is never empty.

Thanks,
Ian

> Thanks,
> Yang

2023-06-15 07:12:48

by Yang Jihong

[permalink] [raw]

Subject: Re: [PATCH] perf top & record: Fix segfault when default cycles event is not supported

2023-06-15 12:42:09

by Yang Jihong

[permalink] [raw]

Subject: Re: [PATCH] perf top & record: Fix segfault when default cycles event is not supported

Hello,

On 2023/6/15 10:04, Ian Rogers wrote:
> On Wed, Jun 14, 2023 at 6:55 PM Yang Jihong <[email protected]> wrote:
>>
>> Hello,
>>
>> On 2023/6/15 6:03, Ian Rogers wrote:
>>> On Wed, Jun 14, 2023 at 9:18 AM Ian Rogers <[email protected]> wrote:
>>>>
>>>> On Wed, Jun 14, 2023 at 8:18 AM Yang Jihong <[email protected]> wrote:
>>>>>
>>>>> The perf-record and perf-top call parse_event() to add a cycles event to
>>>>> an empty evlist. For the system that does not support hardware cycles
>>>>> event, such as QEMU, the evlist is empty due to the following code process:
>>>>>
>>>>> parse_event(evlist, "cycles:P" or ""cycles:Pu")
>>>>> parse_events(evlist, "cycles:P")
>>>>> __parse_events
>>>>> ...
>>>>> ret = parse_events__scanner(str, &parse_state);
>>>>> // ret = 0
>>>>> ...
>>>>> ret2 = parse_events__sort_events_and_fix_groups()
>>>>> if (ret2 < 0)
>>>>> return ret;
>>>>> // The cycles event is not supported, here ret2 = -EINVAL,
>>>>> // Here return 0.
>>>>> ...
>>>>> evlist__splice_list_tail(evlist)
>>>>> // The code here does not execute to, so the evlist is still empty.
>>>>>
>>>>> A null pointer occurs when the content in the evlist is accessed later.
>>>>>
>>>>> Before:
>>>>>
>>>>> # perf list hw
>>>>>
>>>>> List of pre-defined events (to be used in -e or -M):
>>>>>
>>>>> # perf record true
>>>>> libperf: Miscounted nr_mmaps 0 vs 1
>>>>> WARNING: No sample_id_all support, falling back to unordered processing
>>>>> perf: Segmentation fault
>>>>> Obtained 1 stack frames.
>>>>> [0xc5beff]
>>>>> Segmentation fault
>>>>>
>>>>> Solution:
>>>>> If cycles event is not supported, try to fall back to cpu-clock event.
>>>>>
>>>>> After:
>>>>> # perf record true
>>>>> [ perf record: Woken up 1 times to write data ]
>>>>> [ perf record: Captured and wrote 0.006 MB perf.data ]
>>>>> #
>>>>>
>>>>> Fixes: 7b100989b4f6 ("perf evlist: Remove __evlist__add_default")
>>>>> Signed-off-by: Yang Jihong <[email protected]>
>>>>
>>>> Thanks, useful addition. The cpu-clock fall back wasn't present before
>>>> 7b100989b4f6 so is the fixes tag correct?
>>>
>>> Hmm... it should be coming from evsel__fallback:
>>> https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/util/evsel.c?h=tmp.perf-tools-next#n2840
>>> so we shouldn't duplicate that logic. The question is why we're not
>>> doing the fallback.
>>>
>>
>> Yes, it's a bit of the same logic as evsel__fallback, or we can call
>> evlist__add_default() as before, simply create an evsel of hardware
>> cycles and add it directly to evlist.
>>
>> Please confirm whether this solution is feasible. If it is feasible, I
>> will send a v2 version.
>
> The previous evlist__add_default logic didn't handle wildcard PMUs for
> cycles, hence wanting to reuse the parse events logic. The error is
> that the logic now isn't doing the fallback properly. I think an
> evlist__add_cycles which uses evsel__fallback makes sense matching the
> previous logic. I'd be happy if you took a look. I'll write a patch so
> that the perf_pmus list of core PMUs is never empty.
>

The gdb calltrace for core dump is as follows:

(gdb) bt
#0 0x00000000005ffaa2 in __perf_cpu_map__nr (cpus=0x0) at cpumap.c:283
#1 0x00000000005ffd17 in perf_cpu_map__max (map=0x0) at cpumap.c:371
#2 0x0000000000565644 in cpu_map_data__alloc
(syn_data=syn_data@entry=0x7ffc843bff30,
header_size=header_size@entry=8) at util/synthetic-events.c:1273
#3 0x0000000000568712 in cpu_map_event__new (map=<optimized out>) at
util/synthetic-events.c:1321
#4 perf_event__synthesize_cpu_map (tool=tool@entry=0xc37580 <record>,
map=<optimized out>, process=process@entry=0x413a80
<process_synthesized_event>, machine=machine@entry=0x0) at
util/synthetic-events.c:1341
#5 0x000000000041426e in record__synthesize (tail=tail@entry=false,
rec=0xc37580 <record>) at builtin-record.c:2050
#6 0x0000000000415a0b in __cmd_record (argc=<optimized out>,
argv=<optimized out>, rec=0xc37580 <record>) at builtin-record.c:2512
#7 0x0000000000418f22 in cmd_record (argc=<optimized out>,
argv=<optimized out>) at builtin-record.c:4260
#8 0x00000000004babdd in run_builtin (p=p@entry=0xc3a0e8
<commands+264>, argc=argc@entry=2, argv=argv@entry=0x7ffc843c5b30) at
perf.c:323
#9 0x0000000000401632 in handle_internal_command (argv=0x7ffc843c5b30,
argc=2) at perf.c:377
#10 run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at
perf.c:421
#11 main (argc=2, argv=0x7ffc843c5b30) at perf.c:537

The direct cause of the problem is that rec->evlist->core.all_cpus is
empty, resulting in null pointer access.

The code process is as follows:

cmd_record
parse_event(rec->evlist)
// Hardware cycle events should not be supported here, so rec->evlist
is empty
...

evlist__create_maps(rec->evlist)
perf_evlist__set_maps(&rec->evlist->core)
perf_evlist__propagate_maps(&rec->evlist->core)
perf_evlist__for_each_evsel(&rec->evlist->core, evsel)
// because rec->evlist is empty, don't get into that
__perf_evlist__propagate_maps(), so rec->evlist->core.all_cpus is NULL.
__perf_evlist__propagate_maps
rec->evlist->core.all_cpus = perf_cpu_map__merge(evlist->all_cpus,
evsel->cpus);
...

__cmd_record
record__synthesize
perf_event__synthesize_cpu_map(rec->evlist->core.all_cpus)
cpu_map_event__new(rec->evlist->core.all_cpus)
cpu_map_data__alloc(rec->evlist->core.all_cpus)
perf_cpu_map__max(rec->evlist->core.all_cpus)
__perf_cpu_map__nr
// Here null pointer access!
...

record__open
evsel__fallback
// Here fallback is just starting

Thanks,
Yang

2023-06-27 18:50:28

by Ian Rogers

[permalink] [raw]

Subject: Re: [PATCH] perf top & record: Fix segfault when default cycles event is not supported

On Thu, Jun 15, 2023 at 4:46 AM Yang Jihong <[email protected]> wrote:
>
> Hello,
>
> On 2023/6/15 10:04, Ian Rogers wrote:
> > On Wed, Jun 14, 2023 at 6:55 PM Yang Jihong <[email protected]> wrote:
> >>
> >> Hello,
> >>
> >> On 2023/6/15 6:03, Ian Rogers wrote:
> >>> On Wed, Jun 14, 2023 at 9:18 AM Ian Rogers <[email protected]> wrote:
> >>>>
> >>>> On Wed, Jun 14, 2023 at 8:18 AM Yang Jihong <[email protected]> wrote:
> >>>>>
> >>>>> The perf-record and perf-top call parse_event() to add a cycles event to
> >>>>> an empty evlist. For the system that does not support hardware cycles
> >>>>> event, such as QEMU, the evlist is empty due to the following code process:
> >>>>>
> >>>>> parse_event(evlist, "cycles:P" or ""cycles:Pu")
> >>>>> parse_events(evlist, "cycles:P")
> >>>>> __parse_events
> >>>>> ...
> >>>>> ret = parse_events__scanner(str, &parse_state);
> >>>>> // ret = 0
> >>>>> ...
> >>>>> ret2 = parse_events__sort_events_and_fix_groups()
> >>>>> if (ret2 < 0)
> >>>>> return ret;
> >>>>> // The cycles event is not supported, here ret2 = -EINVAL,
> >>>>> // Here return 0.
> >>>>> ...
> >>>>> evlist__splice_list_tail(evlist)
> >>>>> // The code here does not execute to, so the evlist is still empty.
> >>>>>
> >>>>> A null pointer occurs when the content in the evlist is accessed later.
> >>>>>
> >>>>> Before:
> >>>>>
> >>>>> # perf list hw
> >>>>>
> >>>>> List of pre-defined events (to be used in -e or -M):
> >>>>>
> >>>>> # perf record true
> >>>>> libperf: Miscounted nr_mmaps 0 vs 1
> >>>>> WARNING: No sample_id_all support, falling back to unordered processing
> >>>>> perf: Segmentation fault
> >>>>> Obtained 1 stack frames.
> >>>>> [0xc5beff]
> >>>>> Segmentation fault
> >>>>>
> >>>>> Solution:
> >>>>> If cycles event is not supported, try to fall back to cpu-clock event.
> >>>>>
> >>>>> After:
> >>>>> # perf record true
> >>>>> [ perf record: Woken up 1 times to write data ]
> >>>>> [ perf record: Captured and wrote 0.006 MB perf.data ]
> >>>>> #
> >>>>>
> >>>>> Fixes: 7b100989b4f6 ("perf evlist: Remove __evlist__add_default")
> >>>>> Signed-off-by: Yang Jihong <[email protected]>
> >>>>
> >>>> Thanks, useful addition. The cpu-clock fall back wasn't present before
> >>>> 7b100989b4f6 so is the fixes tag correct?
> >>>
> >>> Hmm... it should be coming from evsel__fallback:
> >>> https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/util/evsel.c?h=tmp.perf-tools-next#n2840
> >>> so we shouldn't duplicate that logic. The question is why we're not
> >>> doing the fallback.
> >>>
> >>
> >> Yes, it's a bit of the same logic as evsel__fallback, or we can call
> >> evlist__add_default() as before, simply create an evsel of hardware
> >> cycles and add it directly to evlist.
> >>
> >> Please confirm whether this solution is feasible. If it is feasible, I
> >> will send a v2 version.
> >
> > The previous evlist__add_default logic didn't handle wildcard PMUs for
> > cycles, hence wanting to reuse the parse events logic. The error is
> > that the logic now isn't doing the fallback properly. I think an
> > evlist__add_cycles which uses evsel__fallback makes sense matching the
> > previous logic. I'd be happy if you took a look. I'll write a patch so
> > that the perf_pmus list of core PMUs is never empty.
> >
>
> The gdb calltrace for core dump is as follows:
>
> (gdb) bt
> #0 0x00000000005ffaa2 in __perf_cpu_map__nr (cpus=0x0) at cpumap.c:283
> #1 0x00000000005ffd17 in perf_cpu_map__max (map=0x0) at cpumap.c:371
> #2 0x0000000000565644 in cpu_map_data__alloc
> (syn_data=syn_data@entry=0x7ffc843bff30,
> header_size=header_size@entry=8) at util/synthetic-events.c:1273
> #3 0x0000000000568712 in cpu_map_event__new (map=<optimized out>) at
> util/synthetic-events.c:1321
> #4 perf_event__synthesize_cpu_map (tool=tool@entry=0xc37580 <record>,
> map=<optimized out>, process=process@entry=0x413a80
> <process_synthesized_event>, machine=machine@entry=0x0) at
> util/synthetic-events.c:1341
> #5 0x000000000041426e in record__synthesize (tail=tail@entry=false,
> rec=0xc37580 <record>) at builtin-record.c:2050
> #6 0x0000000000415a0b in __cmd_record (argc=<optimized out>,
> argv=<optimized out>, rec=0xc37580 <record>) at builtin-record.c:2512
> #7 0x0000000000418f22 in cmd_record (argc=<optimized out>,
> argv=<optimized out>) at builtin-record.c:4260
> #8 0x00000000004babdd in run_builtin (p=p@entry=0xc3a0e8
> <commands+264>, argc=argc@entry=2, argv=argv@entry=0x7ffc843c5b30) at
> perf.c:323
> #9 0x0000000000401632 in handle_internal_command (argv=0x7ffc843c5b30,
> argc=2) at perf.c:377
> #10 run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at
> perf.c:421
> #11 main (argc=2, argv=0x7ffc843c5b30) at perf.c:537
>
> The direct cause of the problem is that rec->evlist->core.all_cpus is
> empty, resulting in null pointer access.
>
> The code process is as follows:
>
> cmd_record
> parse_event(rec->evlist)
> // Hardware cycle events should not be supported here, so rec->evlist
> is empty
> ...
>
> evlist__create_maps(rec->evlist)
> perf_evlist__set_maps(&rec->evlist->core)
> perf_evlist__propagate_maps(&rec->evlist->core)
> perf_evlist__for_each_evsel(&rec->evlist->core, evsel)
> // because rec->evlist is empty, don't get into that
> __perf_evlist__propagate_maps(), so rec->evlist->core.all_cpus is NULL.
> __perf_evlist__propagate_maps
> rec->evlist->core.all_cpus = perf_cpu_map__merge(evlist->all_cpus,
> evsel->cpus);
> ...
>
> __cmd_record
> record__synthesize
> perf_event__synthesize_cpu_map(rec->evlist->core.all_cpus)
> cpu_map_event__new(rec->evlist->core.all_cpus)
> cpu_map_data__alloc(rec->evlist->core.all_cpus)
> perf_cpu_map__max(rec->evlist->core.all_cpus)
> __perf_cpu_map__nr
> // Here null pointer access!
> ...
>
> record__open
> evsel__fallback
> // Here fallback is just starting
>

Sorry, I don't follow this. I sent out a patch for the no core PMU
case - please take a look:
https://lore.kernel.org/lkml/[email protected]/
I haven't got a reproduction for failing to open cycles and it's not
clear to me why evsel__fallback isn't being used to fallback to clock.
Were you able to look at this?

Thanks,
Ian

> Thanks,
> Yang

2023-06-28 07:53:27

by Yang Jihong

[permalink] [raw]

Subject: Re: [PATCH] perf top & record: Fix segfault when default cycles event is not supported

Hello,

On 2023/6/28 2:32, Ian Rogers wrote:
> On Thu, Jun 15, 2023 at 4:46 AM Yang Jihong <[email protected]> wrote:
>>
>> Hello,
>>
>> On 2023/6/15 10:04, Ian Rogers wrote:
>>> On Wed, Jun 14, 2023 at 6:55 PM Yang Jihong <[email protected]> wrote:
>>>>
>>>> Hello,
>>>>
>>>> On 2023/6/15 6:03, Ian Rogers wrote:
>>>>> On Wed, Jun 14, 2023 at 9:18 AM Ian Rogers <[email protected]> wrote:
>>>>>>
>>>>>> On Wed, Jun 14, 2023 at 8:18 AM Yang Jihong <[email protected]> wrote:
>>>>>>>
>>>>>>> The perf-record and perf-top call parse_event() to add a cycles event to
>>>>>>> an empty evlist. For the system that does not support hardware cycles
>>>>>>> event, such as QEMU, the evlist is empty due to the following code process:
>>>>>>>
>>>>>>> parse_event(evlist, "cycles:P" or ""cycles:Pu")
>>>>>>> parse_events(evlist, "cycles:P")
>>>>>>> __parse_events
>>>>>>> ...
>>>>>>> ret = parse_events__scanner(str, &parse_state);
>>>>>>> // ret = 0
>>>>>>> ...
>>>>>>> ret2 = parse_events__sort_events_and_fix_groups()
>>>>>>> if (ret2 < 0)
>>>>>>> return ret;
>>>>>>> // The cycles event is not supported, here ret2 = -EINVAL,
>>>>>>> // Here return 0.
>>>>>>> ...
>>>>>>> evlist__splice_list_tail(evlist)
>>>>>>> // The code here does not execute to, so the evlist is still empty.
>>>>>>>
>>>>>>> A null pointer occurs when the content in the evlist is accessed later.
>>>>>>>
>>>>>>> Before:
>>>>>>>
>>>>>>> # perf list hw
>>>>>>>
>>>>>>> List of pre-defined events (to be used in -e or -M):
>>>>>>>
>>>>>>> # perf record true
>>>>>>> libperf: Miscounted nr_mmaps 0 vs 1
>>>>>>> WARNING: No sample_id_all support, falling back to unordered processing
>>>>>>> perf: Segmentation fault
>>>>>>> Obtained 1 stack frames.
>>>>>>> [0xc5beff]
>>>>>>> Segmentation fault
>>>>>>>
>>>>>>> Solution:
>>>>>>> If cycles event is not supported, try to fall back to cpu-clock event.
>>>>>>>
>>>>>>> After:
>>>>>>> # perf record true
>>>>>>> [ perf record: Woken up 1 times to write data ]
>>>>>>> [ perf record: Captured and wrote 0.006 MB perf.data ]
>>>>>>> #
>>>>>>>
>>>>>>> Fixes: 7b100989b4f6 ("perf evlist: Remove __evlist__add_default")
>>>>>>> Signed-off-by: Yang Jihong <[email protected]>
>>>>>>
>>>>>> Thanks, useful addition. The cpu-clock fall back wasn't present before
>>>>>> 7b100989b4f6 so is the fixes tag correct?
>>>>>
>>>>> Hmm... it should be coming from evsel__fallback:
>>>>> https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/util/evsel.c?h=tmp.perf-tools-next#n2840
>>>>> so we shouldn't duplicate that logic. The question is why we're not
>>>>> doing the fallback.
>>>>>
>>>>
>>>> Yes, it's a bit of the same logic as evsel__fallback, or we can call
>>>> evlist__add_default() as before, simply create an evsel of hardware
>>>> cycles and add it directly to evlist.
>>>>
>>>> Please confirm whether this solution is feasible. If it is feasible, I
>>>> will send a v2 version.
>>>
>>> The previous evlist__add_default logic didn't handle wildcard PMUs for
>>> cycles, hence wanting to reuse the parse events logic. The error is
>>> that the logic now isn't doing the fallback properly. I think an
>>> evlist__add_cycles which uses evsel__fallback makes sense matching the
>>> previous logic. I'd be happy if you took a look. I'll write a patch so
>>> that the perf_pmus list of core PMUs is never empty.
>>>
>>
>> The gdb calltrace for core dump is as follows:
>>
>> (gdb) bt
>> #0 0x00000000005ffaa2 in __perf_cpu_map__nr (cpus=0x0) at cpumap.c:283
>> #1 0x00000000005ffd17 in perf_cpu_map__max (map=0x0) at cpumap.c:371
>> #2 0x0000000000565644 in cpu_map_data__alloc
>> (syn_data=syn_data@entry=0x7ffc843bff30,
>> header_size=header_size@entry=8) at util/synthetic-events.c:1273
>> #3 0x0000000000568712 in cpu_map_event__new (map=<optimized out>) at
>> util/synthetic-events.c:1321
>> #4 perf_event__synthesize_cpu_map (tool=tool@entry=0xc37580 <record>,
>> map=<optimized out>, process=process@entry=0x413a80
>> <process_synthesized_event>, machine=machine@entry=0x0) at
>> util/synthetic-events.c:1341
>> #5 0x000000000041426e in record__synthesize (tail=tail@entry=false,
>> rec=0xc37580 <record>) at builtin-record.c:2050
>> #6 0x0000000000415a0b in __cmd_record (argc=<optimized out>,
>> argv=<optimized out>, rec=0xc37580 <record>) at builtin-record.c:2512
>> #7 0x0000000000418f22 in cmd_record (argc=<optimized out>,
>> argv=<optimized out>) at builtin-record.c:4260
>> #8 0x00000000004babdd in run_builtin (p=p@entry=0xc3a0e8
>> <commands+264>, argc=argc@entry=2, argv=argv@entry=0x7ffc843c5b30) at
>> perf.c:323
>> #9 0x0000000000401632 in handle_internal_command (argv=0x7ffc843c5b30,
>> argc=2) at perf.c:377
>> #10 run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at
>> perf.c:421
>> #11 main (argc=2, argv=0x7ffc843c5b30) at perf.c:537
>>
>> The direct cause of the problem is that rec->evlist->core.all_cpus is
>> empty, resulting in null pointer access.
>>
>> The code process is as follows:
>>
>> cmd_record
>> parse_event(rec->evlist)
>> // Hardware cycle events should not be supported here, so rec->evlist
>> is empty
>> ...
>>
>> evlist__create_maps(rec->evlist)
>> perf_evlist__set_maps(&rec->evlist->core)
>> perf_evlist__propagate_maps(&rec->evlist->core)
>> perf_evlist__for_each_evsel(&rec->evlist->core, evsel)
>> // because rec->evlist is empty, don't get into that
>> __perf_evlist__propagate_maps(), so rec->evlist->core.all_cpus is NULL.
>> __perf_evlist__propagate_maps
>> rec->evlist->core.all_cpus = perf_cpu_map__merge(evlist->all_cpus,
>> evsel->cpus);
>> ...
>>
>> __cmd_record
>> record__synthesize
>> perf_event__synthesize_cpu_map(rec->evlist->core.all_cpus)
>> cpu_map_event__new(rec->evlist->core.all_cpus)
>> cpu_map_data__alloc(rec->evlist->core.all_cpus)
>> perf_cpu_map__max(rec->evlist->core.all_cpus)
>> __perf_cpu_map__nr
>> // Here null pointer access!
>> ...
>>
>> record__open
>> evsel__fallback
>> // Here fallback is just starting
>>
>
> Sorry, I don't follow this. I sent out a patch for the no core PMU
> case - please take a look:
> https://lore.kernel.org/lkml/[email protected]/
Thanks for the patch, it seems to solve the problem. I'll test it now.

> I haven't got a reproduction for failing to open cycles and it's not
> clear to me why evsel__fallback isn't being used to fallback to clock.
> Were you able to look at this?

1. In the QEMU environment that does not support hardware events, as
shown in [1], the sysfs node related to the core PMU does not exist in
the /sys/bus/event_source/devices/ directory.
As a result, evlist is empty after perf_recod invokes
parse_event(evlist, "cycles:P").

2. When perf_record initializes the member in evlist->core, the content
of some members is NULL because evlist is empty. For example, the value
of evlist->core.all_cpus is NULL.

3. Access the content in evlist->core.all_cpus. The null pointer access
is triggered, as shown in [2]. At this time, perf_record has not invoked
evsel__fallback() yet.

4. evsel__fallback() is invoked in record__open(). Therefore, segfault
occurs before fallback to clock.

[1]:
# ls /sys/bus/event_source/devices/
breakpoint kprobe msr software tracepoint uprobe

[2]:
cmd_record
__cmd_record
record__synthesize
perf_event__synthesize_cpu_map(evlist->core.all_cpus)
cpu_map_event__new(evlist->core.all_cpus)
cpu_map_data__alloc(evlist->core.all_cpus)
perf_cpu_map__max(evlist->core.all_cpus)
__perf_cpu_map__nr
// Here null pointer access ...

Thanks,
Yang