Since commit ba751e28d442 ("net: dsa: mt7530: add interrupt support")
the mt7530 driver can act as an interrupt controller. Wire up irq line
of the MT7531 switch on the BananaPi BPi-R64 board, so the status of
the PHYs of the five 1000Base-T ports doesn't need to be polled any
more.
Signed-off-by: Daniel Golle <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index d583e816684cf..aabd104b12acf 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -150,6 +150,10 @@ mdio: mdio-bus {
switch@0 {
compatible = "mediatek,mt7531";
reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
reset-gpios = <&pio 54 0>;
ports {
--
2.40.0
On 19/04/2023 21:16, Daniel Golle wrote:
> Since commit ba751e28d442 ("net: dsa: mt7530: add interrupt support")
> the mt7530 driver can act as an interrupt controller. Wire up irq line
> of the MT7531 switch on the BananaPi BPi-R64 board, so the status of
> the PHYs of the five 1000Base-T ports doesn't need to be polled any
> more.
>
> Signed-off-by: Daniel Golle <[email protected]>
Applied, thanks
> ---
> arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> index d583e816684cf..aabd104b12acf 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
> @@ -150,6 +150,10 @@ mdio: mdio-bus {
> switch@0 {
> compatible = "mediatek,mt7531";
> reg = <0>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + interrupt-parent = <&pio>;
> + interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
> reset-gpios = <&pio 54 0>;
>
> ports {