ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7-rc2/2.6.7-rc2-mm2/
- Huge update to the SiS framebuffer driver. Please test.
- As soon as I merged Andrey's big dmi cleanup patches everyone started
madly patching dmi_scan.c. The subsequent reject storm forced me to drop
them.
- Big devicemapper update - new feature work.
- Various fixes, some quite serious.
Changes since 2.6.7-rc2-mm1:
linus.patch
bk-acpi.patch
bk-agpgart.patch
bk-alsa.patch
bk-cifs.patch
bk-cpufreq.patch
bk-drm.patch
bk-input.patch
bk-netdev.patch
bk-ntfs.patch
bk-scsi.patch
bk-usb.patch
External trees.
-for-radeonfb-non-8bpp-clear-doesnt-use-palette.patch
-s2io-section-fix.patch
-ppc32-reorg-dma-api-add-coherent-alloc-in-irq.patch
-ppc64-iseries-default-config-update.patch
-ppc64-iseries-virtual-ethernet-minor-optimisation.patch
-ppc64-iseries-fix-virtual-ethernet-transmit-block.patch
-ppc64-add-eeh_add_device_early-late.patch
-ppc64-reset-iseries-progress-indicator-on-boot.patch
-ppc64-bolt-first-vmalloc-segment-into-slb.patch
-ppc64-slb-accounting-fix.patch
-ppc64-iseries-bolted-slb-fix.patch
-ppc64-fix-missing-relocs-add-linuxphandle-property.patch
-add-futex_cmp_requeue-futex-op.patch
-new-radeonfb-powerdown-doesnt-work.patch
-r8169-ethtool-set_settings.patch
-r8169-ethtool-get_settings-link.patch
-r8169-link-handling-and-phy-reset-rework.patch
-r8169-initial-link-setup-rework.patch
-add-support-for-isd-300-usb-controller.patch
-nuke-has_ip_copysum-for-net-drivers.patch
-make-proliant-8500-boot-with-26.patch
-prism54-add-new-private-ioctls.patch
-prism54-reset-card-on-tx_timeout.patch
-prism54-add-iwspy-support.patch
-prism54-add-support-for-avs-header-in.patch
-prism54-new-prism54-kernel-compatibility.patch
-prism54-fix-prism54org-bugs-74-75.patch
-prism54-fix-24-build.patch
-prism54-fix-prism54org-bugs-39-73.patch
-prism54-fix-prism54org-bug-77-strengthened-oid-transaction.patch
-prism54-dont-allow-mib-reads-while-unconfigured.patch
-prism54-touched-up-kernel-compatibility.patch
-prism54-start-using-likely-unlikely.patch
-prism54-fix-24-smp-build.patch
-prism54-fix-channel-stats-bump-to-12.patch
-mark-cache_names-__initdata.patch
-support-for-sc1100-in-linux-kernel.patch
-missing-pop-off-in-arch-i386-kernel-acpi-wakeups.patch
-mdc-message-during-quiet-boot.patch
-posix_mqueue-depends-on-net.patch
-security_selinux-depends-on-net.patch
-pnpbios-only-makes-sense-for-x86.patch
-agp-resume-fixups.patch
-document-checkstacks.patch
-add-watchdog-timer-to-iseries_veth-driver.patch
-vram-boot-option.patch
-s-tkill-tgkill-in--documentation.patch
-linux-timerh-needs-linux-stddefh.patch
-fix-mca-procfs-stub.patch
-fix-net-ixgb-ixgb_mainc-warning.patch
-fix-readahead-handling-in-knfsd.patch
-i386-bitops-memory-clobbers.patch
-sched-remove-noinline-workaround.patch
-checkstack-fixes.patch
-cpqarray-sa_sample_random.patch
-add-const-to-some-scheduling-functions.patch
-use-aio-workqueue-in-fs-aioc.patch
-correct-use_mm-unuse_mm-to-use-task_lock-to-protect-mm.patch
-cris-architecture-update.patch
Merged
-nmi-trigger-switch-support-for-debugging.patch
Dropped - was causing various build problems.
+hiddev-warning-fixes.patch
Build fix
+bk-input-build-fix.patch
Build fix
+kgdb-ia64-fixes.patch
Fixes for the ia64 kgdb stub
+ramfs-o_sync-oops-fix.patch
Fix oops due to O_SYNC writes to ramfs
+direct-io-invalidation-fix.patch
Fix direct-io fs corruption
+mm-swapper_spacei_mmap_nonlinear.patch
+mm-follow_page-invalid-pte_page.patch
+mm-vma_adjust-adjust_next-wrap.patch
+mm-vma_adjust-insert-file-earlier.patch
+mm-get_user_pages-vs-try_to_unmap.patch
+mm-kill-missed-pte-warning.patch
+mm-flush-tlb-when-clearing-young.patch
+mm-pretest-pte_young-and-pte_dirty.patch
memory management updatelets
+ppc32-add-indirect-dcr-access-pass-2.patch
+ppc64-kernel-makefile-options-for-as.patch
+ppc64-update-info-about-available-iseries_veth-interfaces.patch
+ppc64-gives-up-too-quickly-on-hotplugged-cpu.patch
ppc updates
-logitech-keyboard-fix.patch
Dropped, might be fixed by other means
-add-qsort-library-function.patch
Dropped - the XFS part of this got lost.
+hpet-dont-use-new-major.patch
Use a miscdevice for the HPET driver - don't require a new major.
-ppc64-fault-deadlock-fix.patch
-ia32-fault-deadlock-fix.patch
-ia32-fault-deadlock-fix-cleanup.patch
+ia32-fault-deadlock-fix-2.patch
+ppc64-fault-deadlock-fix-2.patch
Reworked
+kernel-parameter-parsing-fix-fix.patch
Keep on plugging at the kernel-parameter parsing code.
+3ware-9000-driver-update-for-267-rc2-mm2.patch
Update the 3ware SATA raid driver
-dmi-simplify-dmi-matching-data.patch
-dmi-export-dmi-probe-function.patch
-dmi-codingstyle-and-whitespace-cleanups.patch
-dmi-port-sonypi-driver-to-new-dmi-probing.patch
-dmi-port-apm-bios-driver-to-new-dmi-probing.patch
-dmi-port-hp-pavilion-irq-routing-quirk-to-new-dmi-probing.patch
-dmi-port-piix4-i2c-driver-to-new-dmi-probing.patch
-dmi-port-pnp-bios-driver-to-new-dmi-probing.patch
-dmi-port-acpi-boot-code-to-new-dmi-probing.patch
-dmi-port-reboot-related-quirks-to-new-dmi-probing.patch
-dmi-port-powernow-k7-driver-to-new-dmi-probing.patch
-dmi-port-local-apic-quirks-to-new-dmi-probing.patch
-dmi-port-acpi-sleep-quirk-to-new-dmi-probing.patch
-dmi-port-i8042-quirk-to-new-dmi-probing.patch
Dropped - these kept on breaking.
+bsd-acct-warning-fix.patch
Fix warning in the BSD accounting patch
+iso9660-inodes-beyond-4gb-fixes.patch
+iso9660-comment-cleanup.patch
Updates to iso9660-inodes-beyond-4gb.patch
+perfctr-disabled-build-fix.patch
Build fix
+sisfb-update-1710.patch
SiS framebuffer driver update
+nfs-writepage-fix.patch
Fix oom lockups due to nfs writeback of mmapped data
+selinux-check-processed-security-context-length.patch
SELinux fix
+floppy-fix.patch
Fix /dev/fd1 handling
+balance-on-exec-fix.patch
scheduler optimisation
+3c59x-support-for-ati-radeon-9100-igp.patch
Add support for the 3c59x controller in an ATI Radeon card.
+fix-loop-device-cache-handling.patch
Add a missing dcache flush.
+fix-possible-null-pointer-in-fs-ext3-superc.patch
Error handling fix
+dm_remove_all32.patch
Add missing DM ioctl conversion.
+ide-dont-put-disks-in-standby-mode-on-halt-on-alpha.patch
+ide-fix-for-generic-ide-pci-module.patch
+ide-ide_pci_device_t-sanitization.patch
+ide-merge-amd74xxh-into-amd74xxc.patch
+ide-add-new-nforce-ide-sata-device-ids-to-amd74xxc.patch
+ide-use-generic-ide_init_hwif_ports-on-m68k.patch
+ide-use-asm-i386-ideh-as-asm-x86_64-ideh.patch
+ide-add-ide_arch_obsolete_defaults.patch
+ide-remove-useless-proc-ide-siimage-from-siimagec.patch
+ide-simplify-config_idedma_onlydisk-logic-a-bit.patch
IDE update
+mm-oom_killc-trivial-cleanup.patch
Remove duplicated assignment.
+use-const-in-timeh-unit-conversion-functions.patch
+fix-io_getevents-timer-expiry-setting.patch
AIO fixes
+move-endif-to-correct-place.patch
Fixlet in kernel/signal.c
+hugetlb-msync-fix.patch
Fix msync() on hugetlb mappings
+nx-267-rc2-bk2-ae.patch
+nx-267-rc2-bk2-ae-warning-fix.patch
ia32 no-execute support
+hugetlb-dtor-reinit.patch
hugetlbpage fix
+mtd-jedec-probe-additions.patch
Add JEDEC probe functions to MTD.
+use-kern_alert-more-for-oopses.patch
Fix printk facility levels
+s390-1-4-core-s390.patch
+s390-2-4-common-i-o-layer.patch
+s390-3-4-block-device-driver.patch
+s390-4-4-network-device-driver.patch
s390 update
+quota-fix-writing-of-quota-info.patch
+fix-for-old-quota-format.patch
Quota fixes
+1-5-device-mapper-dm-ioc.patch
+dm-cache-flushing-fix.patch
+2-5-device-mapper-kcopyd.patch
+2-5-device-mapper-kcopyd-docs.patch
+3-5-device-mapper-snapshots.patch
+4-5-device-mapper-mirroring.patch
+5-5-device-mapper-dm-zero.patch
+dm-zero-flushing-fix.patch
device mapper update
+let-serial_8250_acpi-depend-on-acpi_pci-2.patch
config dependency fix
+export-acpi_register_gsi.patch
Linkage fix
+kill-off-efi_dir-in-efih.patch
Remove unneeded stuff
+update-elilo-loader-location-in-kconfig.patch
Documentation update
+ext3_orphan_del-may-double-decrement-bh-b_count.patch
Fix error-path double-brelse in ext3
+submission-of-via-velocitytm-series-adapter-driver.patch
+via-velocity-oops-fix.patch
New VIA net driver
+use-c99-struct-initializer-in-hotcpu_notifier.patch
Cleanup
+better-names-for-edd-legacy_-fields.patch
use better identifiers
+use-decimal-instead-of-hex-for-edd-values.patch
EDD driver cleanup
+eep-lost-24-change-for-buslogic-info.patch
Documentation update
+fb-accel-capabilities.patch
Use fbdev acceleration for fb consoles
+rawdev-driver.patch
A driver which allows userspace to access the raw ps2 data stream.
+sys_io_setup-fix.patch
AIO fix
+fix-sys-cpumap-for-352-nr_cpus.patch
Fix sysfs output truncation for massive SMP machines.
All 301 patches:
linus.patch
bk-acpi.patch
bk-agpgart.patch
bk-alsa.patch
bk-cifs.patch
bk-cpufreq.patch
bk-drm.patch
bk-input.patch
bk-netdev.patch
bk-ntfs.patch
bk-scsi.patch
bk-usb.patch
mm.patch
add -mmN to EXTRAVERSION
hiddev-warning-fixes.patch
hiddev warning fixes
bk-input-build-fix.patch
bk-input-build-fix
kgdb-ga.patch
kgdb stub for ia32 (George Anzinger's one)
kgdbL warning fix
kgdb buffer overflow fix
kgdbL warning fix
kgdb: CONFIG_DEBUG_INFO fix
x86_64 fixes
correct kgdb.txt Documentation link (against 2.6.1-rc1-mm2)
kgdb: fix for recent gcc
kgdb warning fixes
THREAD_SIZE fixes for kgdb
kgdb-in-sched_functions.patch
kgdboe-netpoll.patch
kgdb-over-ethernet via netpoll
kgdboe: fix configuration of MAC address
kgdb-x86_64-support.patch
kgdb-x86_64-support.patch for 2.6.2-rc1-mm3
kgdb-x86_64-warning-fixes
kgdb-in-sched_functions-x86_64.patch
kgdb-ia64-support.patch
IA64 kgdb support
kgdb-ia64-fixes.patch
ia64 kgdb repair and cleanup
ramfs-o_sync-oops-fix.patch
ramfs o_sync oops fix
direct-io-invalidation-fix.patch
direct-io invalidation fix
mp_find_ioapic-oops-fix.patch
mp_find_ioapic cannot be __init
shrink_all_memory-fix.patch
shrink_all_memory() fixes
mm-swapper_spacei_mmap_nonlinear.patch
mm: swapper_space.i_mmap_nonlinear
mm-follow_page-invalid-pte_page.patch
mm: follow_page invalid pte_page
mm-vma_adjust-adjust_next-wrap.patch
mm: vma_adjust adjust_next wrap
mm-vma_adjust-insert-file-earlier.patch
mm: vma_adjust insert file earlier
mm-get_user_pages-vs-try_to_unmap.patch
mm: get_user_pages vs. try_to_unmap
mm-kill-missed-pte-warning.patch
mm: kill missed pte warning
mm-flush-tlb-when-clearing-young.patch
mm: flush TLB when clearing young
mm-pretest-pte_young-and-pte_dirty.patch
mm: pretest pte_young and pte_dirty
make-tree_lock-an-rwlock.patch
make mapping->tree_lock an rwlock
radix_tree_tag_set-atomic.patch
Make radix_tree_tag_set/clear atomic wrt the tag
radix_tree_tag_set-only-needs-read_lock.patch
radix_tree_tag_set only needs read_lock()
must-fix.patch
must fix lists update
must fix list update
mustfix update
must-fix-update-5.patch
must-fix update
mustfix-lists.patch
mustfix lists
ppc32-add-indirect-dcr-access-pass-2.patch
ppc32: add "indirect" DCR access, pass 2
ppc64-kernel-makefile-options-for-as.patch
ppc64: kernel Makefile options for $(AS)
ppc64-update-info-about-available-iseries_veth-interfaces.patch
ppc64: update info about available iseries_veth interfaces
ppc64-gives-up-too-quickly-on-hotplugged-cpu.patch
ppc64 gives up too quickly on hotplugged cpu
ppc64-reloc_hide.patch
invalidate_inodes-speedup.patch
invalidate_inodes speedup
more invalidate_inodes speedup fixes
config_spinline.patch
uninline spinlocks for profiling accuracy.
allow-i386-to-reenable-interrupts-on-lock-contention.patch
Allow i386 to reenable interrupts on lock contention
pdflush-diag.patch
get_user_pages-handle-VM_IO.patch
fix get_user_pages() against mappings of /dev/mem
pci_set_power_state-might-sleep.patch
slab-leak-detector.patch
slab leak detector
mm/slab.c warning in cache_alloc_debugcheck_after
local_bh_enable-warning-fix.patch
schedstats.patch
sched: scheduler statistics
cond_resched-might-sleep.patch
cond_resched() might sleep
fa311-mac-address-fix.patch
wrong mac address with netgear FA311 ethernet card
pid_max-fix.patch
Bug when setting pid_max > 32k
non-readable-binaries.patch
Handle non-readable binfmt_misc executables
binfmt_misc-credentials.patch
binfmt_misc: improve calaulation of interpreter's credentials
poll-select-longer-timeouts.patch
poll()/select(): support longer timeouts
poll-select-range-check-fix.patch
poll()/select() range checking fix
poll-select-handle-large-timeouts.patch
poll()/select(): handle long timeouts
add-a-slab-for-ethernet.patch
Add a kmalloc slab for ethernet packets
siimage-update.patch
ide: update for siimage driver
shm-do_munmap-check.patch
stack-overflow-test-fix.patch
Fix stack overflow test for non-8k stacks
jbd-remove-livelock-avoidance.patch
JBD: remove livelock avoidance code in journal_dirty_data()
journal_add_journal_head-debug.patch
journal_add_journal_head-debug
list_del-debug.patch
list_del debug check
oops-dump-preceding-code.patch
i386 oops output: dump preceding code
lockmeter.patch
lockmeter
ia64 CONFIG_LOCKMETER fix
unplug-can-sleep.patch
unplug functions can sleep
firestream-warnings.patch
firestream warnings
ext3_rsv_cleanup.patch
ext3 block reservation patch set -- ext3 preallocation cleanup
ext3_rsv_base.patch
ext3 block reservation patch set -- ext3 block reservation
ext3 reservations: fix performance regression
ext3 block reservation patch set -- mount and ioctl feature
ext3 block reservation patch set -- dynamically increase reservation window
ext3-reservation-default-on.patch
ext3 reservation: default to on
ext3-reservation-ifdef-cleanup-patch.patch
ext3 reservation ifdef cleanup patch
ext3-reservation-max-window-size-check-patch.patch
ext3 reservation max window size check patch
ext3-reservation-file-ioctl-fix.patch
ext3 reservation file ioctl fix
ext3-lazy-discard-reservation-window-patch.patch
ext3 lazy discard reservation window patch
ext3 discard reservation in last iput fix patch
Fix lazy reservation discard
ext3-reservation-bad-inode-fix.patch
ext3 reservations: bad_inode fix
ext3_reservation_discard_race_fix.patch
ext3 reservation discard race fix
clean-up-asm-pgalloch-include.patch
Clean up asm/pgalloc.h include
clean-up-asm-pgalloch-include-2.patch
Clean up asm/pgalloc.h include
clean-up-asm-pgalloch-include-3.patch
Clean up asm/pgalloc.h include 3
ppc64-uninline-__pte_free_tlb.patch
ppc64: uninline __pte_free_tlb()
input-tsdev-fixes.patch
tsdev.c fixes
fix-scancode-keycode-scancode-conversion-for-265.patch
Fix scancode->keycode->scancode conversion
fealnx-mac-address-and-other-issues.patch
Fealnx. Mac address and other issues
reiserfs-group-alloc-9.patch
reiserfs: block allocator optimizations
reiserfs-block-allocator-should-not-inherit-packing-locality.patch
reiserfs: block allocator should not inherit "packing locality 1"
reiserfs-remove-debugging-warning-from-block-allocator.patch
reiserfs: remove debugging warning from block allocator
reiserfs-group-alloc-9-build-fix.patch
reiserfs-group-alloc-9 build fix
reiserfs-search_reada-5.patch
reiserfs: btree readahead
reiserfs-data-logging-support.patch
reiserfs data logging support
force-config_regparm-to-y.patch
Force CONFIG_REGPARM to `y'
hugetlb_shm_group-sysctl-gid-0-fix.patch
hugetlb_shm_group sysctl-gid-0-fix
idr-overflow-fixes.patch
Fixes for idr code
idr-remove-counter.patch
idr: remove counter bits from id's
idr-fixups.patch
IDR fixups
use-idr_get_new-to-allocate-a-bus-id-in-drivers-i2c-i2c-corec-update-to-new-api.patch
use-idr_get_new-to-allocate-a-bus-id-in-drivers-i2c-i2c-corec-update-to-new-api
rlim-add-rlimit-entry-for-controlling-queued-signals.patch
RLIM: add rlimit entry for controlling queued signals
rlim-add-sigpending-field-to-user_struct.patch
RLIM: add sigpending field to user_struct
rlim-pass-task_struct-in-send_signal.patch
RLIM: pass task_struct in send_signal()
rlim-add-simple-get_uid-helper.patch
RLIM: add simple get_uid() helper
rlim-enforce-rlimits-on-queued-signals.patch
RLIM: enforce rlimits on queued signals
rlim-remove-unused-queued_signals-global-accounting.patch
RLIM: remove unused queued_signals global accounting
rlim-add-rlimit-entry-for-posix-mqueue-allocation.patch
RLIM: add rlimit entry for POSIX mqueue allocation
rlim-add-mq_bytes-to-user_struct.patch
RLIM: add mq_bytes to user_struct
rlim-add-mq_attr_ok-helper.patch
RLIM: add mq_attr_ok() helper
rlim-enforce-rlimits-for-posix-mqueue-allocation.patch
RLIM: enforce rlimits for POSIX mqueue allocation
rlim-adjust-default-mqueue-sizes.patch
RLIM: adjust default mqueue sizes
call-might_sleep-in-tasklet_kill.patch
Call might_sleep() in tasklet_kill
really-ptrace-single-step-2.patch
ptrace single-stepping fix
abs-cleanup.patch
abs() cleanup
add-i386-readq.patch
add i386 readq()/writeq()
hpet-driver.patch
HPET driver
hpet-dont-use-new-major.patch
hpet: don't require a new major
hpet-driver-updates.patch
HPET driver updates
hpet-driver-updates-move-readq.patch
hpet-driver-updates-move-readq
hpet-kconfig-loop-fix.patch
HPET: Fix Kconfig dependency loop
hpet-rtc-dependency-fix.patch
HPET RTC dependency fix
hpet-free_irq-deadlock-fix.patch
hpet-free_irq-deadlock-fix
kill-off-pc9800.patch
Remove PC9800 support
more-pc9800-removal.patch
more PC9800 removal
pc9800-merge-std_resourcesc-back-into-setupc.patch
pc9800: merge std_resources.c back into setup.c
ftruncate-vs-block_write_full_page.patch
ftruncate-vs-block_write_full_page
ext3-retry-allocation-after-transaction-commit-v2.patch
Ext3: Retry allocation after transaction commit (v2)
ext3-retry-allocation-after-transaction-commit-v2-jbd-api.patch
ext3-retry-allocation-after-transaction-commit-v2: implement JBD API
sysfs-leaves-mount.patch
sysfs backing store: add sysfs_dirent
sysfs-leaves-dir.patch
sysfs backing store: add sysfs_dirent
sysfs-leaves-file.patch
sysfs backing store: sysfs_create() changes
sysfs-leaves-bin.patch
sysfs backing store: bin attribute changes
sysfs-leaves-symlink.patch
sysfs backing store: sysfs_create_link changes
sysfs-leaves-misc.patch
sysfs backing store: attribute groups and misc routines
pty-allocation-first-fit.patch
Use first-fit for pty allocation
dynpty-fix.patch
dynamic pty allocation fixes
sync_inodes_sb-debug.patch
sync_inodes_sb-debug
vmscan-handle-synchronous-writepage.patch
vmscan: handle synchronous writepage()
vmscan-handle-synchronous-writepage-fix.patch
vmscan-handle-synchronous-writepage-fix
ramdisk-buffer-uptodate-fix.patch
ramdisk: buffer_uptodate fix
2-3-small-tweaks-to-standard-resource-stuff.patch
small tweaks to standard resource stuff
3-3-same-small-tweaks-x86_64-version.patch
same small resource tweaks, x86_64 version
sis900-fix-phy-transceiver-detection.patch
sis900: Fix PHY transceiver detection
getgroups16-fix.patch
getgroups16() fix
ia32-fault-deadlock-fix-2.patch
ia32: fix deadlocks when oopsing while mmap_sem is held
ppc64-fault-deadlock-fix-2.patch
ppc64: fix deadlocks when oopsing while mmap_sem is held
ext3-htree-rename-fix.patch
ext3: htree rename fix
advansys-basic-highmem-dma-support.patch
advansys: add basic highmem/DMA support
SL0-core-RC6-bk5.patch
symlinks: infrastructure
SL1-ext2-RC6-bk5.patch
symlinks: ext2 conversion
SL2-trivial-RC6-bk5.patch
symlinks: trivial cases
SL3-page-RC6-bk5.patch
symlinks: reuse new helpers
SL4-smb-RC6-bk5.patch
symlinks: smbfs
SL5-xfs-RC6-bk5.patch
symlinks: XFS
SL6-shm-RC6-bk5.patch
symlinks: tmpfs
SL7-befs-RC6-bk5.patch
symlinks: befs
SL8-jffs2-RC6-bk5.patch
symlinks: jffs2
ipr-ppc64-depends.patch
Make ipr.c require ppc
disk-barrier-core.patch
disk barriers: core
disk-barrier-core-tweaks.patch
disk-barrier-core-tweaks
disk-barrier-ide.patch
disk barriers: IDE
disk-barrier-ide-symbol-expoprt.patch
disk-barrier-ide-symbol-expoprt
disk-barrier-ide-warning-fix.patch
disk-barrier ide warning fix
barrier-update.patch
barrier update
disk-barrier-scsi.patch
disk barriers: scsi
disk-barrier-dm.patch
disk barriers: devicemapper
disk-barrier-md.patch
disk barriers: MD
reiserfs-v3-barrier-support.patch
reiserfs v3 barrier support
reiserfs-v3-barrier-support-tweak.patch
reiserfs-v3-barrier-support-tweak
ext3-barrier-support.patch
ext3 barrier support
sync_dirty_buffer-retval.patch
make sync_dirty_buffer() return something useful
jbd-barrier-fallback-on-failure.patch
jbd: barrier fallback on failure
jbd-barrier-fallback-on-failure-fix.patch
x86-stack-dump-fixes.patch
x86 stack dump fixes
check-return-status-of-register-calls-in-i82365.patch
Check return status of register calls in i82365
invalidate_inodes2-mark-pages-notuptodate.patch
invalidate_inodes2(): mark pages not uptodate
reduce-tlb-flushing-during-process-migration.patch
Reduce TLB flushing during process migration
reduce-tlb-flushing-during-process-migration-oops-fix.patch
reduce-tlb-flushing-during-process-migration oops fix
kernel-parameter-parsing-fix.patch
Kernel parameter parsing fix
kernel-parameter-parsing-fix-fix.patch
kernel-parameter-parsing-fix fix
Move-saved_command_line-to-init-mainc.patch
Move saved_command_line to init/main.c
arch/i386/boot/compressed/misc.c warning fixes
reiserfs-v3-logging-bug-for-blocksize-page-size.patch
reiserfs v3 logging bug for blocksize < page size
partition-table-validity-checking.patch
partition table validity checking
read-vs-truncate-race.patch
Fix read() vs truncate race
tulip-driver-deadlocks-on-device-removal.patch
Fix tulip deadlocks on device removal
rcu-lock-update-add-per-cpu-batch-counter.patch
rcu lock update: Add per-cpu batch counter
rcu-lock-update-use-a-sequence-lock-for-starting-batches.patch
rcu lock update: Use a sequence lock for starting batches
rcu-lock-update-code-move-cleanup.patch
rcu lock update: Code move & cleanup
3ware-9000-sata-raid-1.patch
3ware 9000 SATA-RAID driver v2.26.00.009 (1)
3ware-9000-sata-raid-2.patch
3ware 9000 SATA-RAID driver v2.26.00.009 (2)
3ware-9000-driver-update-for-267-rc2-mm2.patch
3ware 9000 driver update
pcm_native-stack-reduction.patch
pcm_native.c stack reduction
cleanups-for-apic.patch
io_apic.c code consolidation
remove-apic_lockup_debug.patch
x86: remove APIC_LOCKUP_DEBUG
remove-io_apic_sync.patch
x86: remove io_apic_sync
vmscan-GFP_NOFS-try-harder.patch
vmscan-GFP_NOFS-try-harder
ach1542-mca-build-fix.patch
ahc1542 !CONFIG_MCA build fix
validate-pm-timer-rate-at-boot-time.patch
Validate PM-Timer rate at boot time
knfsd-1-of-11-fix-nfs3-dentry-encoding.patch
kNFSd: Fix nfs3 dentry encoding
knfsd-2-of-11-nfsd_exp_remove_null_checkpatch.patch
kNFSd: exp_find(): remove null pointer check
knfsd-3-of-11-nfsd_acceptable_typopatch.patch
kNFSd: nfsd_acceptable() typo fix
knfsd-4-of-11-nfsd_xdr_name_encodingpatch.patch
kNFSd: nfsd4 xdr name encoding improvements
knfsd-5-of-11-gss_svc_module_refpatch.patch
kNFSd: gss_svc locking and refcounting fixes
knfsd-5-of-11-gss_svc_module_refpatch-fix.patch
knfsd-5-of-11-gss_svc_module_refpatch-fix
knfsd-5-of-11-gss_svc_module_refpatch-fix2.patch
gss_svc_module_ref typo fix
knfsd-6-of-11-nfsd_gss_rsc_lookup_freepatch.patch
kNFSd: rsc_lookup simplification
knfsd-7-of-11-nfsd-releaselkownerpatch.patch
kNFSd: nfsd4_release_lockowner() oops fix
knfsd-8-of-11-nfsd-getattr-fixpatch.patch
kNFSd: nfsd getattr fix
knfsd-9-of-11-nfsd-setclientid-fixpatch.patch
kNFSd: nfsd4 setclientid fix
knfsd-10-of-11-nfsd-create-fixpatch.patch
kNFSd: nfsd4 file creation fix
knfsd-11-of-11-exporting_doc_typospatch.patch
kNFSd: documentation typo fixes
md-1-of-8-rationalise-device-selection-in-md-multipath.patch
md: rationalise device selection in md/multipath.
md-2-of-8-make-sure-md_check_recovery-will-remove-a-faulty-device-when-nr_pending-hits-0.patch
md: make sure md_check_recovery will remove a faulty device when ->nr_pending hits 0
md-3-of-8-allow-an-md-personality-to-refuse-a-hot-remove-request.patch
md: allow an md personality to refuse a hot-remove request.
md-4-of-8-make-sure-the-size-of-a-raid5-6-array-is-a-multiple-of-the-chunk-size.patch
md: make sure the size of a raid5/6 array is a multiple of the chunk size.
md-5-of-8-handle-hot-add-for-arrays-with-non-persistent-superblocks.patch
md: handle hot-add for arrays with non-persistent superblocks
md-6-of-8-abort-the-resync-of-raid1-there-is-only-one-device.patch
md: abort the resync of raid1 there is only one device.
md-7-of-8-allow-md-arrays-to-be-resized-if-devices-are-large-enough.patch
md: allow md arrays to be resized if devices are large enough.
md-8-of-8-support-reshaping-raid1-arrays-adding-or-removing-drives.patch
md: support reshaping raid1 arrays - adding or removing drives.
md-8-of-8-support-reshaping-raid1-arrays-adding-or-removing-drives-fix.patch
md 8-of-8 fix
enable-suspend-resuming-of-e1000.patch
Enable suspend/resuming of e1000
fix-3c59xc-to-allow-3c905c-100bt-fd.patch
fix 3c59x.c to allow 3c905c 100bT-FD
tty_io-hangup-locking.patch
tty_io.c hangup locking
vmscanc-move-writepage-invocation-into-its-own-function.patch
vmscan.c: move ->writepage invocation into its own function
vmscanc-struct-scan_control.patch
vmscan.c: struct scan_control
first-cut-at-fixing-the-3c59x-power-mismanagment.patch
First cut at fixing the 3c59x power mismanagment
kbuild-specify-default-target-during-configuration.patch
kbuild: Specify default target during configuration
runtime-selection-of-config_paride_epatc8.patch
runtime selection of CONFIG_PARIDE_EPATC8
bsd-accounting-format-rework.patch
BSD accounting format rework
bsd-acct-warning-fix.patch
bsd-acct-warning-fix
iso9660-inodes-beyond-4gb.patch
iso9660: fix handling of inodes beyond 4GB
iso9660-inodes-beyond-4gb-fixes.patch
iso9660-inodes-beyond-4gb-fixes
iso9660-comment-cleanup.patch
iso9660: comment cleanup
perfctr-core.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][1/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: core
perfctr-disabled-build-fix.patch
CONFIG_PERFCTR=n build fix
perfctr-i386.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][2/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: i386
perfctr-x86_64.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][3/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: x86_64
perfctr-ppc.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][4/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: PowerPC
perfctr-virtualised-counters.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][5/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: virtualised counters
perfctr-misc.patch
From: Mikael Pettersson <[email protected]>
Subject: [PATCH][6/6] perfctr-2.7.3 for 2.6.7-rc1-mm1: misc
reference_init.patch
Add reference_init.pl to `make buildcheck' target
sisfb-update-1710.patch
sisfb update 1.7.10
nfs-writepage-fix.patch
Fix nfs writepage behaviour
selinux-check-processed-security-context-length.patch
selinux: check processed security context length
floppy-fix.patch
floppy minor number fix
balance-on-exec-fix.patch
sched: balance-on-exec fix
3c59x-support-for-ati-radeon-9100-igp.patch
3c59x: support for ATI Radeon 9100 IGP
fix-loop-device-cache-handling.patch
Fix loop device cache handling
fix-possible-null-pointer-in-fs-ext3-superc.patch
fix possible NULL pointer in fs/ext3/super.c.
dm_remove_all32.patch
dm: add DM_REMOVE_ALL_32 compat ioctl
ide-dont-put-disks-in-standby-mode-on-halt-on-alpha.patch
ide: don't put disks in standby mode on halt on Alpha
ide-fix-for-generic-ide-pci-module.patch
ide: fix for generic IDE PCI module
ide-ide_pci_device_t-sanitization.patch
ide: ide_pci_device_t sanitization
ide-merge-amd74xxh-into-amd74xxc.patch
ide: merge amd74xx.h into amd74xx.c
ide-add-new-nforce-ide-sata-device-ids-to-amd74xxc.patch
ide: add new nForce IDE/SATA device IDs to amd74xx.c
ide-use-generic-ide_init_hwif_ports-on-m68k.patch
ide: use generic ide_init_hwif_ports() on m68k
ide-use-asm-i386-ideh-as-asm-x86_64-ideh.patch
ide: use <asm-i386/ide.h> as <asm-x86_64/ide.h>
ide-add-ide_arch_obsolete_defaults.patch
ide: add IDE_ARCH_OBSOLETE_DEFAULTS
ide-remove-useless-proc-ide-siimage-from-siimagec.patch
ide: remove useless /proc/ide/siimage from siimage.c
ide-simplify-config_idedma_onlydisk-logic-a-bit.patch
ide: simplify CONFIG_IDEDMA_ONLYDISK logic a bit
mm-oom_killc-trivial-cleanup.patch
mm/oom_kill.c trivial cleanup
use-const-in-timeh-unit-conversion-functions.patch
use const in time.h unit conversion functions
fix-io_getevents-timer-expiry-setting.patch
aio: fix io_getevents() timer expiry setting
move-endif-to-correct-place.patch
move #endif to correct place
hugetlb-msync-fix.patch
hugetlbpage msync() fix
direct-io-hole-fix.patch
direct-io hole fix
nx-267-rc2-bk2-ae.patch
NX (No eXecute) support for x86
nx-267-rc2-bk2-ae-warning-fix.patch
nx-267-rc2-bk2-ae-warning-fix
hugetlb-dtor-reinit.patch
hugetlbpage: reinitialise compound page destructor
mtd-jedec-probe-additions.patch
MTD: add st m50fw0* to jedec_probe.c
use-kern_alert-more-for-oopses.patch
Use KERN_ALERT more for oopses
s390-1-4-core-s390.patch
s390: core
s390-2-4-common-i-o-layer.patch
s390: common i/o layer
s390-3-4-block-device-driver.patch
s390: block device driver
s390-4-4-network-device-driver.patch
s390: network device driver
quota-fix-writing-of-quota-info.patch
quota: fix writing of quota info
fix-for-old-quota-format.patch
quota: fix for old quota format
1-5-device-mapper-dm-ioc.patch
dm-io: device-mapper i/o library for kcopyd
dm-cache-flushing-fix.patch
dm: cache flushing fix
2-5-device-mapper-kcopyd.patch
Device-mapper: kcopyd
2-5-device-mapper-kcopyd-docs.patch
kcopyd commentary
3-5-device-mapper-snapshots.patch
Device-mapper: snapshots
4-5-device-mapper-mirroring.patch
Device-mapper: mirroring
5-5-device-mapper-dm-zero.patch
Device-mapper: dm-zero
dm-zero-flushing-fix.patch
Device-mapper: dm-zero flushing fix
let-serial_8250_acpi-depend-on-acpi_pci-2.patch
let SERIAL_8250_ACPI depend on ACPI_PCI
export-acpi_register_gsi.patch
export acpi_register_gsi()
kill-off-efi_dir-in-efih.patch
kill off efi_dir in efi.h
update-elilo-loader-location-in-kconfig.patch
update elilo loader location in Kconfig
ext3_orphan_del-may-double-decrement-bh-b_count.patch
ext3_orphan_del may double-decrement bh->b_count
submission-of-via-velocitytm-series-adapter-driver.patch
Via "velocity(tm)" series adapter driver
via-velocity-oops-fix.patch
via-velocity oops fix
use-c99-struct-initializer-in-hotcpu_notifier.patch
use c99 struct initializer in hotcpu_notifier
better-names-for-edd-legacy_-fields.patch
Better names for EDD legacy_* fields
use-decimal-instead-of-hex-for-edd-values.patch
Use decimal instead of hex for EDD values
eep-lost-24-change-for-buslogic-info.patch
Lost 2.4 change for BusLogic info
fb-accel-capabilities.patch
fb accel capabilities
rawdev-driver.patch
input: raw access to serio ports (1/2)
sys_io_setup-fix.patch
bug in sys_io_setup
fix-sys-cpumap-for-352-nr_cpus.patch
fix sysfs node cpumap for large NR_CPUS
In the broken out patch set, the patch:
hpet-dont-use-new-major.patch
is junk - no recognizable patch to be applied.
Dropping it from the patch set works - at least
the other patches, including hpet*, apply ok.
--
I won't rest till it's the best ...
Programmer, Linux Scalability
Paul Jackson <[email protected]> 1.650.933.1373
Linux 2.6 (mm tree) Compile Statistics (gcc 3.2.2)
Warnings/Errors Summary
Kernel bzImage bzImage bzImage modules bzImage modules
(defconfig) (allno) (allyes) (allyes) (allmod) (allmod)
--------------- ---------- -------- -------- -------- -------- --------
2.6.7-rc2-mm2 0w/0e 5w/0e 109w/10e 5w/0e 2w/0e 105w/2e
2.6.7-rc2-mm1 0w/0e 12w/0e 158w/13e 5w/0e 3w/0e 153w/4e
2.6.7-rc1-mm1 0w/0e 6w/0e 108w/0e 5w/0e 2w/0e 104w/0e
2.6.6-mm5 0w/0e 0w/0e 109w/5e 5w/0e 2w/0e 110w/0e
2.6.6-mm4 0w/0e 0w/0e 112w/9e 5w/0e 2w/5e 106w/1e
2.6.6-mm3 3w/9e 0w/0e 120w/26e 5w/0e 2w/0e 114w/10e
2.6.6-mm2 4w/11e 0w/0e 120w/24e 6w/0e 2w/0e 118w/9e
2.6.6-mm1 1w/0e 0w/0e 118w/25e 6w/0e 2w/0e 114w/10e
2.6.6-rc3-mm2 0w/0e 0w/0e 117w/ 0e 8w/0e 2w/0e 116w/0e
2.6.6-rc3-mm1 0w/0e 0w/0e 120w/10e 8w/0e 2w/0e 152w/2e
2.6.6-rc2-mm2 0w/0e 1w/5e 118w/ 0e 8w/0e 3w/0e 118w/0e
2.6.6-rc2-mm1 0w/0e 0w/0e 115w/ 0e 7w/0e 3w/0e 116w/0e
2.6.6-rc1-mm1 0w/0e 0w/7e 122w/ 0e 7w/0e 4w/0e 122w/0e
2.6.5-mm6 0w/0e 0w/0e 123w/ 0e 7w/0e 4w/0e 124w/0e
2.6.5-mm5 0w/0e 0w/0e 119w/ 0e 7w/0e 4w/0e 120w/0e
2.6.5-mm4 0w/0e 0w/0e 120w/ 0e 7w/0e 4w/0e 121w/0e
2.6.5-mm3 0w/0e 1w/0e 121w/12e 7w/0e 3w/0e 123w/0e
2.6.5-mm2 0w/0e 0w/0e 128w/12e 7w/0e 3w/0e 134w/0e
2.6.5-mm1 0w/0e 5w/0e 122w/ 0e 7w/0e 3w/0e 124w/0e
2.6.5-rc3-mm4 0w/0e 0w/0e 124w/ 0e 8w/0e 4w/0e 126w/0e
2.6.5-rc3-mm3 0w/0e 5w/0e 129w/14e 8w/0e 4w/0e 129w/6e
2.6.5-rc3-mm2 0w/0e 5w/0e 130w/14e 8w/0e 4w/0e 129w/6e
2.6.5-rc3-mm1 0w/0e 5w/0e 129w/ 0e 8w/0e 4w/0e 129w/0e
2.6.5-rc2-mm5 0w/0e 5w/0e 130w/ 0e 8w/0e 4w/0e 129w/0e
2.6.5-rc2-mm4 0w/0e 5w/0e 134w/ 0e 8w/0e 3w/0e 133w/0e
2.6.5-rc2-mm3 0w/0e 5w/0e 134w/ 0e 8w/0e 3w/0e 133w/0e
2.6.5-rc2-mm2 0w/0e 5w/0e 137w/ 0e 8w/0e 3w/0e 134w/0e
2.6.5-rc2-mm1 0w/0e 5w/0e 136w/ 0e 8w/0e 3w/0e 134w/0e
2.6.5-rc1-mm2 0w/0e 5w/0e 135w/ 5e 8w/0e 3w/0e 133w/0e
2.6.5-rc1-mm1 0w/0e 5w/0e 135w/ 5e 8w/0e 3w/0e 133w/0e
2.6.4-mm2 1w/2e 5w/2e 144w/10e 8w/0e 3w/2e 144w/0e
2.6.4-mm1 1w/0e 5w/0e 146w/ 5e 8w/0e 3w/0e 144w/0e
2.6.4-rc2-mm1 1w/0e 5w/0e 146w/12e 11w/0e 3w/0e 147w/2e
2.6.4-rc1-mm2 1w/0e 5w/0e 144w/ 0e 11w/0e 3w/0e 145w/0e
2.6.4-rc1-mm1 1w/0e 5w/0e 147w/ 5e 11w/0e 3w/0e 147w/0e
2.6.3-mm4 1w/0e 5w/0e 146w/ 0e 7w/0e 3w/0e 142w/0e
2.6.3-mm3 1w/2e 5w/2e 146w/15e 7w/0e 3w/2e 144w/5e
2.6.3-mm2 1w/8e 5w/0e 140w/ 0e 7w/0e 3w/0e 138w/0e
2.6.3-mm1 1w/0e 5w/0e 143w/ 5e 7w/0e 3w/0e 141w/0e
2.6.3-rc3-mm1 1w/0e 0w/0e 144w/13e 7w/0e 3w/0e 142w/3e
2.6.3-rc2-mm1 1w/0e 0w/265e 144w/ 5e 7w/0e 3w/0e 145w/0e
2.6.3-rc1-mm1 1w/0e 0w/265e 141w/ 5e 7w/0e 3w/0e 143w/0e
2.6.2-mm1 2w/0e 0w/264e 147w/ 5e 7w/0e 3w/0e 173w/0e
2.6.2-rc3-mm1 2w/0e 0w/265e 146w/ 5e 7w/0e 3w/0e 172w/0e
2.6.2-rc2-mm2 0w/0e 0w/264e 145w/ 5e 7w/0e 3w/0e 171w/0e
2.6.2-rc2-mm1 0w/0e 0w/264e 146w/ 5e 7w/0e 3w/0e 172w/0e
2.6.2-rc1-mm3 0w/0e 0w/265e 144w/ 8e 7w/0e 3w/0e 169w/0e
2.6.2-rc1-mm2 0w/0e 0w/264e 144w/ 5e 10w/0e 3w/0e 171w/0e
2.6.2-rc1-mm1 0w/0e 0w/264e 144w/ 5e 10w/0e 3w/0e 171w/0e
2.6.1-mm5 2w/5e 0w/264e 153w/11e 10w/0e 3w/0e 180w/0e
2.6.1-mm4 0w/821e 0w/264e 154w/ 5e 8w/1e 5w/0e 179w/0e
2.6.1-mm3 0w/0e 0w/0e 151w/ 5e 10w/0e 3w/0e 177w/0e
2.6.1-mm2 0w/0e 0w/0e 143w/ 5e 12w/0e 3w/0e 171w/0e
2.6.1-mm1 0w/0e 0w/0e 146w/ 9e 12w/0e 6w/0e 171w/0e
2.6.1-rc2-mm1 0w/0e 0w/0e 149w/ 0e 12w/0e 6w/0e 171w/4e
2.6.1-rc1-mm2 0w/0e 0w/0e 157w/15e 12w/0e 3w/0e 185w/4e
2.6.1-rc1-mm1 0w/0e 0w/0e 156w/10e 12w/0e 3w/0e 184w/2e
2.6.0-mm2 0w/0e 0w/0e 161w/ 0e 12w/0e 3w/0e 189w/0e
2.6.0-mm1 0w/0e 0w/0e 173w/ 0e 12w/0e 3w/0e 212w/0e
Web page with links to complete details:
http://developer.osdl.org/cherry/compile/
John
On Thursday 03 June 2004 10:53, Andrew Morton wrote:
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7-rc2/2.6
>.7-rc2-mm2/
SiS framebuffer works here. But my kernel does not boot, it stops at
Starting hotplug subsystem:
input
net
pci
sis900: already loaded
8139too: already loaded
ignore pci display device on 01:00.0
usb
and right here it stops.
Normally it looks this way:
Starting hotplug subsystem:
input
net
pci
sis900: already loaded
8139too: already loaded
ignore pci display device on 01:00.0
usb
done
Here is my lspci -vvv output of the USB controllers:
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at e2420000 (32-bit, non-prefetchable)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at e2421000 (32-bit, non-prefetchable)
0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size: 0x08 (32 bytes)
Interrupt: pin C routed to IRQ 22
Region 0: Memory at e2422000 (32-bit, non-prefetchable)
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0
Controller (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 7010
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max)
Interrupt: pin D routed to IRQ 23
Region 0: Memory at e2423000 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
By the way, with 2.6.6-mm5 (the last working -mm patch on my machine), I get
only following PHY messages:
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 19, 00:10:dc:8f:a9:ac.
with the current 2.6.7-rc2-mm2 patch, I get
eth0: Unknown PHY transceiver found at address 0.
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Unknown PHY transceiver found at address 2.
eth0: Unknown PHY transceiver found at address 3.
eth0: Unknown PHY transceiver found at address 4.
eth0: Unknown PHY transceiver found at address 5.
eth0: Unknown PHY transceiver found at address 6.
eth0: Unknown PHY transceiver found at address 7.
eth0: Unknown PHY transceiver found at address 8.
eth0: Unknown PHY transceiver found at address 9.
eth0: Unknown PHY transceiver found at address 10.
eth0: Unknown PHY transceiver found at address 11.
eth0: Unknown PHY transceiver found at address 12.
eth0: Unknown PHY transceiver found at address 13.
eth0: Unknown PHY transceiver found at address 14.
eth0: Unknown PHY transceiver found at address 15.
eth0: Unknown PHY transceiver found at address 16.
eth0: Unknown PHY transceiver found at address 17.
eth0: Unknown PHY transceiver found at address 18.
eth0: Unknown PHY transceiver found at address 19.
eth0: Unknown PHY transceiver found at address 20.
eth0: Unknown PHY transceiver found at address 21.
eth0: Unknown PHY transceiver found at address 22.
eth0: Unknown PHY transceiver found at address 23.
eth0: Unknown PHY transceiver found at address 24.
eth0: Unknown PHY transceiver found at address 25.
eth0: Unknown PHY transceiver found at address 26.
eth0: Unknown PHY transceiver found at address 27.
eth0: Unknown PHY transceiver found at address 28.
eth0: Unknown PHY transceiver found at address 29.
eth0: Unknown PHY transceiver found at address 30.
eth0: Unknown PHY transceiver found at address 31.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xdc00, IRQ 19, 00:10:dc:8f:a9:ac.
It works ok, as the address 1 is used as default, but I just wanted to mention
that.
greets dominik
On Thu, Jun 03 2004, Andrew Morton wrote:
> bk-acpi.patch
Doesn't compile if you disable ACPI, since mp_register_gsi is guarded by
#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER)
but used in arch/i386/kernel/acpi/boot.c if CONFIG_X86_IO_APIC is set
alone. I have to disable ACPI on this box still, otherwise it crashes
very hard immediately after displaying ACPI banner.
--
Jens Axboe
On Thu, 03 Jun 2004 01:53:56 -0700
Andrew Morton <[email protected]> wrote:
(snip)
> -nmi-trigger-switch-support-for-debugging.patch
>
> Dropped - was causing various build problems.
I fixed the issue and remade a patch against -mm2.
I have tested various configurations and I have no problem now.
A document(proc.txt) is attached too.
Thanks,
Nobuyuki Akiyama
====
diff -Nur linux-2.6.7-rc2-mm2.org/arch/i386/kernel/nmi.c linux-2.6.7-rc2-mm2/arch/i386/kernel/nmi.c
--- linux-2.6.7-rc2-mm2.org/arch/i386/kernel/nmi.c 2004-06-03 19:16:13.000000000 +0900
+++ linux-2.6.7-rc2-mm2/arch/i386/kernel/nmi.c 2004-06-03 19:43:29.000000000 +0900
@@ -25,12 +25,15 @@
#include <linux/module.h>
#include <linux/nmi.h>
#include <linux/sysdev.h>
+#include <linux/sysctl.h>
#include <asm/smp.h>
#include <asm/mtrr.h>
#include <asm/mpspec.h>
#include <asm/nmi.h>
+#include "mach_traps.h"
+
#ifdef CONFIG_KGDB
#include <asm/kgdb.h>
#ifdef CONFIG_SMP
@@ -42,6 +45,8 @@
unsigned int nmi_watchdog = NMI_NONE;
#endif
+int unknown_nmi_panic;
+
static unsigned int nmi_hz = HZ;
static unsigned int nmi_perfctr_msr; /* the MSR to reset in NMI handler */
static unsigned int nmi_p4_cccr_val;
@@ -436,8 +441,6 @@
nmi_active = 1;
}
-static spinlock_t nmi_print_lock = SPIN_LOCK_UNLOCKED;
-
/*
* the best way to detect whether a CPU has a 'hard lockup' problem
* is to check it's local APIC timer IRQ counts. If they are not
@@ -472,6 +475,8 @@
int tune_watchdog = 5*HZ;
#endif
+extern void die_nmi(struct pt_regs *, const char *msg);
+
void nmi_watchdog_tick (struct pt_regs * regs)
{
@@ -502,21 +507,8 @@
alert_counter[cpu] = 0;
}
#endif
- if (alert_counter[cpu] == 5*nmi_hz) {
- spin_lock(&nmi_print_lock);
- /*
- * We are in trouble anyway, lets at least try
- * to get a message out.
- */
- bust_spinlocks(1);
- printk("NMI Watchdog detected LOCKUP on CPU%d, eip %08lx, registers:\n", cpu, regs->eip);
- show_registers(regs);
- printk("console shuts up ...\n");
- console_silent();
- spin_unlock(&nmi_print_lock);
- bust_spinlocks(0);
- do_exit(SIGSEGV);
- }
+ if (alert_counter[cpu] == 5*nmi_hz)
+ die_nmi(regs, "NMI Watchdog detected LOCKUP");
} else {
last_irq_sums[cpu] = sum;
alert_counter[cpu] = 0;
@@ -543,6 +535,45 @@
}
}
+static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
+{
+ unsigned char reason = get_nmi_reason();
+ char buf[64];
+
+ if (!(reason & 0xc0)) {
+ sprintf(buf, "NMI received for unknown reason %02x\n", reason);
+ die_nmi(regs, buf);
+ }
+ return 0;
+}
+
+/*
+ * proc handler for /proc/sys/kernel/unknown_nmi_panic
+ */
+int proc_unknown_nmi_panic(ctl_table *table, int write,
+ struct file *file, void __user *buffer, size_t *length)
+{
+ int old_state;
+
+ old_state = unknown_nmi_panic;
+ proc_dointvec(table, write, file, buffer, length);
+ if (!!old_state == !!unknown_nmi_panic)
+ return 0;
+
+ if (unknown_nmi_panic) {
+ if (reserve_lapic_nmi() < 0) {
+ unknown_nmi_panic = 0;
+ return -EBUSY;
+ } else {
+ set_nmi_callback(unknown_nmi_panic_callback);
+ }
+ } else {
+ release_lapic_nmi();
+ unset_nmi_callback();
+ }
+ return 0;
+}
+
EXPORT_SYMBOL(nmi_active);
EXPORT_SYMBOL(nmi_watchdog);
EXPORT_SYMBOL(reserve_lapic_nmi);
diff -Nur linux-2.6.7-rc2-mm2.org/arch/i386/kernel/traps.c linux-2.6.7-rc2-mm2/arch/i386/kernel/traps.c
--- linux-2.6.7-rc2-mm2.org/arch/i386/kernel/traps.c 2004-06-03 19:16:13.000000000 +0900
+++ linux-2.6.7-rc2-mm2/arch/i386/kernel/traps.c 2004-06-03 19:18:00.000000000 +0900
@@ -547,6 +547,27 @@
printk("Do you have a strange power saving mode enabled?\n");
}
+static spinlock_t nmi_print_lock = SPIN_LOCK_UNLOCKED;
+
+void die_nmi (struct pt_regs *regs, const char *msg)
+{
+ spin_lock(&nmi_print_lock);
+ /*
+ * We are in trouble anyway, lets at least try
+ * to get a message out.
+ */
+ bust_spinlocks(1);
+ printk(msg);
+ printk(" on CPU%d, eip %08lx, registers:\n",
+ smp_processor_id(), regs->eip);
+ show_registers(regs);
+ printk("console shuts up ...\n");
+ console_silent();
+ spin_unlock(&nmi_print_lock);
+ bust_spinlocks(0);
+ do_exit(SIGSEGV);
+}
+
static void default_do_nmi(struct pt_regs * regs)
{
unsigned char reason = get_nmi_reason();
diff -Nur linux-2.6.7-rc2-mm2.org/include/linux/sysctl.h linux-2.6.7-rc2-mm2/include/linux/sysctl.h
--- linux-2.6.7-rc2-mm2.org/include/linux/sysctl.h 2004-06-03 19:16:29.000000000 +0900
+++ linux-2.6.7-rc2-mm2/include/linux/sysctl.h 2004-06-03 19:18:00.000000000 +0900
@@ -133,6 +133,7 @@
KERN_NGROUPS_MAX=63, /* int: NGROUPS_MAX */
KERN_SPARC_SCONS_PWROFF=64, /* int: serial console power-off halt */
KERN_HZ_TIMER=65, /* int: hz timer on or off */
+ KERN_UNKNOWN_NMI_PANIC=66, /* int: unknown nmi panic flag */
};
diff -Nur linux-2.6.7-rc2-mm2.org/kernel/sysctl.c linux-2.6.7-rc2-mm2/kernel/sysctl.c
--- linux-2.6.7-rc2-mm2.org/kernel/sysctl.c 2004-06-03 19:16:20.000000000 +0900
+++ linux-2.6.7-rc2-mm2/kernel/sysctl.c 2004-06-03 19:48:23.000000000 +0900
@@ -63,6 +63,12 @@
extern int printk_ratelimit_jiffies;
extern int printk_ratelimit_burst;
+#if defined(CONFIG_X86_LOCAL_APIC)
+extern int unknown_nmi_panic;
+extern int proc_unknown_nmi_panic(ctl_table *, int, struct file *,
+ void __user *, size_t *);
+#endif
+
/* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */
static int maxolduid = 65535;
static int minolduid;
@@ -618,6 +624,16 @@
.mode = 0444,
.proc_handler = &proc_dointvec,
},
+#if defined(CONFIG_X86_LOCAL_APIC)
+ {
+ .ctl_name = KERN_UNKNOWN_NMI_PANIC,
+ .procname = "unknown_nmi_panic",
+ .data = &unknown_nmi_panic,
+ .maxlen = sizeof (int),
+ .mode = 0644,
+ .proc_handler = &proc_unknown_nmi_panic,
+ },
+#endif
{ .ctl_name = 0 }
};
====
--- proc.txt.orig 2004-06-03 23:40:56.785905960 +0900
+++ proc.txt 2004-06-03 23:42:06.264343632 +0900
@@ -1109,6 +1109,20 @@
The location where the modprobe binary is located. The kernel uses this
program to load modules on demand.
+unknown_nmi_panic
+-----------------
+
+The value in this file affects behavior of handling NMI. When the value is
+non-zero, unknown NMI is trapped and then panic occurs. At that time, kernel
+debugging information is displayed on console.
+
+NMI switch that most IA32 servers have fires unknown NMI up, for example.
+If a system hangs up, try pressing the NMI switch.
+
+[NOTE]
+ This function and oprofile share a NMI callback. Therefore this function
+ cannot be enabled when oprofile is activated.
+
2.4 /proc/sys/vm - The virtual memory subsystem
-----------------------------------------------
> +bsd-acct-warning-fix.patch
>
> Fix warning in the BSD accounting patch
Thanks for educating me one this.
I vaguely remember someone wrote on lkml that defining variables in blocks
was bad because some gcc version wouldn't deal well with it. This was just
at the time I wrote these lines, so I refrained from it in spite of the
warning. OTOH, this is so very basic C that I cannot imagine gcc getting
it wrong.
There is one other mistake in the BSD accounting patch, fixed below
(thanks to Peter Lundkvist for reporting).
Then there's the thing with units of time not exactly corresponding to
USER_HZ anymore.
And it seems this didn't get much outside testing yet, since I've only
recently seen the first download of the userspace tools. Well, BSD
accounting isn't too exciting these days...
I'll probably roll up another version before this can hit mainline.
Tim
--- linux-2.6.7-rc2-acct1/include/linux/acct.h 2004-06-03 18:21:47.000000000 +0200
+++ linux-2.6.7-rc2-acct2/include/linux/acct.h 2004-06-03 18:21:55.000000000 +0200
@@ -165,7 +165,7 @@ static inline u64 jiffies_64_to_AHZ(u64
{
#if HZ == AHZ
/* do nothing */
-#elseif (HZ % AHZ)==0
+#elif (HZ % AHZ)==0
do_div(x, HZ / AHZ);
#else
x *= AHZ;
Hi to all.
Today I've tried latest mm2 patch on my system and after reboot, X server
can't start (blinking screen for 4 or 5 times, then a simple black screen and
machine hangs).
After a new reboot with init 1, I found this in the Xfree86.0.log:
----------------------------------
[cut]
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Generic Keyboard" handled by legacy driver
(II) Synaptics touchpad driver version 0.13.2
Configured Mouse no synaptics event device found (checked 5 nodes)
(**) Option "Device" "/dev/psaux"
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "180"
(**) Option "MaxTapMove" "220"
(**) Option "EmulateMidButtonTime" "100"
(**) Option "VertScrollDelta" "100"
Query no Synaptics: 6003C8
(EE) Configured Mouse no synaptics touchpad detected and no repeater device
(EE) Configured Mouse Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "Configured Mouse"
(II) UnloadModule: "synaptics"
(**) Option "Protocol" "ImPS/2"
(**) Generic Mouse: Protocol: "ImPS/2"
(**) Option "SendCoreEvents" "true"
(**) Generic Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Generic Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Generic Mouse: ZAxisMapping: buttons 4 and 5
(**) Generic Mouse: Buttons: 5
(WW) No core pointer registered
(II) XINPUT: Adding extended input device "Generic Mouse" (type: MOUSE)
(II) Generic Mouse: ps2EnableDataReporting: succeeded
No core pointer
Fatal server error:
failed to initialize core devices
------------------------------------
However, using the old 2.6.6-mm4 there's no problem.
The synaptic driver is the latest 0.13.2 and my .config shows:
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_SERIO_PCIPS2=m
CONFIG_MOUSE_PS2=y
TIA,
Mario
PS: Just a little report for Sis framebuffer driver: it works fine on my
sis650 and sis302LV.
PPS: Sorry for all mistakes I made !!!
--
Il reggiseno e' uno strumento democratico perche' separa la destra dalla
sinistra, solleva le masse e attira i popoli.
Dominik Karall <[email protected]> wrote:
>
> On Thursday 03 June 2004 10:53, Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7-rc2/2.6
> >.7-rc2-mm2/
>
> SiS framebuffer works here. But my kernel does not boot, it stops at
>
> Starting hotplug subsystem:
> input
> net
> pci
> sis900: already loaded
> 8139too: already loaded
> ignore pci display device on 01:00.0
> usb
>
> and right here it stops.
>
> Normally it looks this way:
>
> Starting hotplug subsystem:
> input
> net
> pci
> sis900: already loaded
> 8139too: already loaded
> ignore pci display device on 01:00.0
> usb
> done
Can you get sysrq-T output?
Can you please grab ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7-rc2/2.6.7-rc2-mm2/broken-out/bk-usb.patch and do
patch -p1 -i ~/bk-usb.patch
and retest?
GEN .version
CHK include/linux/compile.h
UPD include/linux/compile.h
CC init/version.o
LD init/built-in.o
LD .tmp_vmlinux1
arch/i386/kernel/built-in.o(.text+0x996a): In function
`acpi_register_gsi':
: undefined reference to `mp_register_gsi'
make: *** [.tmp_vmlinux1] Error 1
CONFIG_ACPI_INTERPRETER missing somehow maybe?
Hope this is the relevant part:
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
# CONFIG_HPET_TIMER is not set
# CONFIG_HPET_EMULATE_RTC is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not set
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_REGPARM is not set
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_PM_DISK is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
# CONFIG_ACPI is not set
CONFIG_ACPI_BOOT=y
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
CONFIG_APM_REAL_MODE_POWER_OFF=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_NAMES is not set
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
On Friday 04 June 2004 01:18, Andrew Morton wrote:
> Dominik Karall <[email protected]> wrote:
> > On Thursday 03 June 2004 10:53, Andrew Morton wrote:
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7-rc2
> > >/2.6 .7-rc2-mm2/
> >
> > SiS framebuffer works here. But my kernel does not boot, it stops at
> >
> > Starting hotplug subsystem:
> > input
> > net
> > pci
> > sis900: already loaded
> > 8139too: already loaded
> > ignore pci display device on 01:00.0
> > usb
> >
> > and right here it stops.
> >
> > Normally it looks this way:
> >
> > Starting hotplug subsystem:
> > input
> > net
> > pci
> > sis900: already loaded
> > 8139too: already loaded
> > ignore pci display device on 01:00.0
> > usb
> > done
>
> Can you get sysrq-T output?
As I didn't know whats that command, I googled for it and found that I must
hit Alt+SysRq+t and then debug information should be printed out, am I right?
But I tried that, and nothing happens. SYSCTL is enabled in the kernel
config.
If you really need this output, I would be pleased if anybody can inform me
how I can get it. Thanks in advance!
>
> Can you please grab
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7-rc2/2.6
>.7-rc2-mm2/broken-out/bk-usb.patch and do
>
> patch -p1 -R -i ~/bk-usb.patch
>
> and retest?
I reverted the bk-usb.patch and it works now.
greets dominik
Dominik Karall wrote:
>>Can you get sysrq-T output?
>>
>>
>
>As I didn't know whats that command, I googled for it and found that I must
>hit Alt+SysRq+t and then debug information should be printed out, am I right?
>But I tried that, and nothing happens. SYSCTL is enabled in the kernel
>config.
>If you really need this output, I would be pleased if anybody can inform me
>how I can get it. Thanks in advance!
>
>
You must turn on SysRq support in kernel config (CONFIG_MAGIC_SYSRQ=y).
Lenar
2.6.7-rc2-mm2 works fine, except for one thing: When my
init.d/setserial tries to set the saved state of the serial devices
using:
/bin/setserial -z /dev/ttyS0 uart 16550A port 0x03f8 irq 4 baud_base 115200 spd_normal skip_test
then the machine freezes. The magic sysrq keys don't work; I have to
cycle the power...
This happened with 2.6.7-rc2-mm2 and 2.6.7-rc2-mm1, it does work with
2.6.7-rc2-bk2.
--
Ralf Hildebrandt (Im Auftrag des Referat V a) [email protected]
Charite - Universit?tsmedizin Berlin Tel. +49 (0)30-450 570-155
Gemeinsame Einrichtung von FU- und HU-Berlin Fax. +49 (0)30-450 570-916
IT-Zentrum Standort Campus Mitte AIM. ralfpostfix
On Thursday 03 June 2004 18:03, Dominik Karall wrote:
> On Thursday 03 June 2004 10:53, Andrew Morton wrote:
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.7-rc2/2
> >.6 .7-rc2-mm2/
>
> SiS framebuffer works here. But my kernel does not boot, it stops at
>
> Starting hotplug subsystem:
> input
> net
> pci
> sis900: already loaded
> 8139too: already loaded
> ignore pci display device on 01:00.0
> usb
>
> and right here it stops.
Does not look like kernel messages to me.
If this happend after init is started, it's easy to track
which startup script/program hangs and run strace/gdb/whatever
on it.
--
vda
FYI:
The following compile error with CONFIG_VIDEO_CX88=y when using gcc 2.95
is still present in both 2.6.7-rc2 and 2.6.7-rc2-mm2:
<-- snip -->
...
LD .tmp_vmlinux1
drivers/built-in.o(.text+0x372a76): In function `set_tvaudio':
: undefined reference to `__ucmpdi2'
drivers/built-in.o(.text+0x372a90): In function `set_tvaudio':
: undefined reference to `__ucmpdi2'
drivers/built-in.o(.text+0x372aa3): In function `set_tvaudio':
: undefined reference to `__ucmpdi2'
drivers/built-in.o(.text+0x372aba): In function `set_tvaudio':
: undefined reference to `__ucmpdi2'
drivers/built-in.o(.text+0x372ada): In function `set_tvaudio':
: undefined reference to `__ucmpdi2'
drivers/built-in.o(.text+0x372af4): more undefined references to
`__ucmpdi2' follow
make: *** [.tmp_vmlinux1] Error 1
<-- snip -->
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
On Friday 04 June 2004 16:48, Alan Stern wrote:
> On Fri, 4 Jun 2004, Andrew Morton wrote:
> > Guys, the USB bk tree as of 24 hours ago causes Dominik's
> > machine to hang during boot.
>
> The problem might be this patch, which was removed by Greg yesterday:
>
> http://marc.theaimsgroup.com/?l=linux-usb-devel&m=108595019132692&w=2
>
> Alan Stern
Yes, I removed that patch from the bk-usb.patch and it works now for me too.
greets dominik
On 155, 06 03, 2004 at 01:53:56AM -0700, Andrew Morton wrote:
>
> - As soon as I merged Andrey's big dmi cleanup patches everyone started
> madly patching dmi_scan.c. The subsequent reject storm forced me to drop
> them.
Could you apply attached patch (only exports DMI check functions) instead of them ?
With this patch applied these "mad patchers" will have an alternative
to pushing their crap^H^H^Hhanges into dmi_scan.c
I tried to make this patch as nonintrusive as possible.
Best regards.
--
Andrey Panin | Linux and UNIX system administrator
[email protected] | PGP key: wwwkeys.pgp.net
On 159, 06 07, 2004 at 10:01:57 -0700, Andrew Morton wrote:
> Andrey Panin <[email protected]> wrote:
> >
> > Could you apply attached patch (only exports DMI check functions) instead of them ?
>
> I'll need a better description of what it does, please.
This patch creates and exports 2 functions which can be used
by the rest of kernel code to perform DMI data checks:
- dmi_check_system() function checks system DMI data against
given blacklist table and on each match runs corresponding
callback function;
- dmi_get_system_info() function returns DMI data value.
Useful for people wanting more complex DMI data check than
simple string match.
Also filling unused match entries with NO_MATCH made optional,
but existing NO_MATCH occurences are left intact, so people
are free to continue dmi_scan.c patching without massive
reject problems.
Best regards.
--
Andrey Panin | Linux and UNIX system administrator
[email protected] | PGP key: wwwkeys.pgp.net
On 159, 06 07, 2004 at 10:25:13 -0700, Andrew Morton wrote:
> Andrey Panin <[email protected]> wrote:
> >
> > On 159, 06 07, 2004 at 10:01:57 -0700, Andrew Morton wrote:
> > > Andrey Panin <[email protected]> wrote:
> > > >
> > > > Could you apply attached patch (only exports DMI check functions) instead of them ?
> > >
> > > I'll need a better description of what it does, please.
> >
> > This patch creates and exports 2 functions which can be used
> > by the rest of kernel code to perform DMI data checks:
>
> Thanks. Could you please regenerate a new diff? The last one I had
> doesn't seem to apply.
Patch rediffed agains 2.6.7-rc2-mm2 attached.
--
Andrey Panin | Linux and UNIX system administrator
[email protected] | PGP key: wwwkeys.pgp.net
Andrey Panin <[email protected]> wrote:
>
> > Thanks. Could you please regenerate a new diff? The last one I had
> > doesn't seem to apply.
>
> Patch rediffed agains 2.6.7-rc2-mm2 attached.
Thanks, that works.
It would be good if you could convert a couple of the existing dmi checks
over to this API. That way people can see how to use them and we know that
the new code is getting some exercise.
Choosing some commonly-used table entries would be best.
On 159, 06 07, 2004 at 11:42:35 -0700, Andrew Morton wrote:
> Andrey Panin <[email protected]> wrote:
> >
> > > Thanks. Could you please regenerate a new diff? The last one I had
> > > doesn't seem to apply.
> >
> > Patch rediffed agains 2.6.7-rc2-mm2 attached.
>
> Thanks, that works.
>
> It would be good if you could convert a couple of the existing dmi checks
> over to this API. That way people can see how to use them and we know that
> the new code is getting some exercise.
> Choosing some commonly-used table entries would be best.
Do you remember the reason of dropping my previous DMI patchset ? ;)
I can do it again, but this conversion will lead to new reject
horrors, due to changes in cursed dmi_blacklist array.
Best regards.
--
Andrey Panin | Linux and UNIX system administrator
[email protected] | PGP key: wwwkeys.pgp.net
On 160, 06 08, 2004 at 12:22:45AM -0700, Andrew Morton wrote:
> Andrey Panin <[email protected]> wrote:
> >
> >
> > Do you remember the reason of dropping my previous DMI patchset ? ;)
> >
> > I can do it again, but this conversion will lead to new reject
> > horrors, due to changes in cursed dmi_blacklist array.
>
> Not the whole thing. Just a couple of examples.
Ok, first example attached. Port HP Pavilion irq workaround
to new DMI probing.
--
Andrey Panin | Linux and UNIX system administrator
[email protected] | PGP key: wwwkeys.pgp.net
On Thu, 2004-06-03 at 11:20, Jens Axboe wrote:
> On Thu, Jun 03 2004, Andrew Morton wrote:
> > bk-acpi.patch
>
> Doesn't compile if you disable ACPI, since mp_register_gsi is guarded by
>
> #if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER)
>
> but used in arch/i386/kernel/acpi/boot.c if CONFIG_X86_IO_APIC is set
> alone. I have to disable ACPI on this box still, otherwise it crashes
> very hard immediately after displaying ACPI banner.
"Crashes very hard" I would like to know more.
Does the box have an IOAPIC?
If no, does it boot with "nolapic"?
If yes, does this patch help?
http://bugme.osdl.org/show_bug.cgi?id=1269
thanks,
-Len
On Thu, Jun 10 2004, Len Brown wrote:
> On Thu, 2004-06-03 at 11:20, Jens Axboe wrote:
> > On Thu, Jun 03 2004, Andrew Morton wrote:
> > > bk-acpi.patch
> >
> > Doesn't compile if you disable ACPI, since mp_register_gsi is guarded by
> >
> > #if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER)
> >
> > but used in arch/i386/kernel/acpi/boot.c if CONFIG_X86_IO_APIC is set
> > alone. I have to disable ACPI on this box still, otherwise it crashes
> > very hard immediately after displaying ACPI banner.
>
> "Crashes very hard" I would like to know more.
> Does the box have an IOAPIC?
> If no, does it boot with "nolapic"?
I think you already know all the details, I discussed it with you some
weeks ago :-). Let me know if you don't have the thread, and I'll bounce
it to you.
I'll try nolapic, haven't tried that.
> If yes, does this patch help?
> http://bugme.osdl.org/show_bug.cgi?id=1269
Will check, thanks.
--
Jens Axboe