Hello,
since the first version of 2.6.12-rc1 and mm[1-4] kernel I can't use any
of my PCI-Express devices that worked with all 2.6.11.[1-6] kernels.
It's a real odd right now.
I have 25 computers with an Intel 925XE Chipset based motherboards and
Intel 6xx CPU on it. So far it does not metter which vendor I choose
(ASUS,ABIT,MSI etc.) the problem stay the same and spread all over.I
tried to boot with pci=routeicq but it did not help to get one device
working with any 2.6.12-rc1-xx kernel. As I mentioned before I tested it
with on several (over 25 computer) with various motherboards (with
ASUS,ABIT,MSI etc.) no luck. Its an 64bit system with [EMT64] and
SMP/SMT and preempt enabled + cpufreq.
My first look was on PCI Routingtable and I found a difference to
2.6.11.x working kernel:
So far
Thanks in advance and best regards
//possible bug/problem
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:04:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Can't get handler for 0000:00:1b.0 --> why this happen
ACPI: Can't get handler for 0000:00:1f.3 --> it does not appear
ACPI: Can't get handler for 0000:04:00.0 --> on 2.6.11.x kernels.
ACPI: Can't get handler for 0000:02:00.0 --> - * -
ACPI: Can't get handler for 0000:01:09.0 --> - * -
ACPI: Can't get handler for 0000:01:0a.0 --> - * -
//this looks like a garbage routing and handler table here
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
//lspci -v output
0000:00:00.0 Host bridge: Intel Corporation 925X/XE Memory Controller
Hub (rev 0e)
Subsystem: Intel Corporation: Unknown device 2580
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] #09 [0109]
0000:00:01.0 PCI bridge: Intel Corporation 925X/XE PCI Express Root Port
(rev 0e) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: d2f00000-d7ffffff
Prefetchable memory behind bridge: d8000000-dfffffff
Expansion ROM at 0000e000 [disabled] [size=4K]
Capabilities: [88] #0d [0000]
Capabilities: [80] Power Management version 2
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0
Enable+
Capabilities: [a0] #10 [0141]
0000:00:1b.0 Class 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) High Definition Audio Controller (rev 04)
Subsystem: ASUSTeK Computer Inc.: Unknown device 813d
Flags: bus master, fast devsel, latency 0, IRQ 169
Memory at d2cf4000 (64-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Capabilities: [70] #10 [0091]
0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 1 (rev 04) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Expansion ROM at 0000d000 [disabled] [size=4K]
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable+
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
0000:00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) PCI Express Port 2 (rev 04) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: d2e00000-d2efffff
Expansion ROM at 0000c000 [disabled] [size=4K]
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable+
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB UHCI #1 (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 50
I/O ports at 9880 [size=32]
0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB UHCI #2 (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 233
I/O ports at 9c00 [size=32]
0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB UHCI #3 (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 225
I/O ports at a000 [size=32]
0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB UHCI #4 (rev 04) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 169
I/O ports at a080 [size=32]
0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) USB2 EHCI Controller (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 50
Memory at d2cff800 (32-bit, non-prefetchable)
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [20a0]
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4)
(prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: d2d00000-d2dfffff
Expansion ROM at 0000b000 [disabled] [size=4K]
Capabilities: [50] #0d [0000]
0000:00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC
Interface Bridge (rev 04)
Flags: bus master, medium devsel, latency 0
0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW
(ICH6 Family) IDE Controller (rev 04) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 225
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at ffa0 [size=16]
0000:00:1f.2 IDE interface: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW)
SATA Controller (rev 04) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc.: Unknown device 2601
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 233
I/O ports at ac00
I/O ports at a880 [size=4]
I/O ports at a800 [size=8]
I/O ports at a480 [size=4]
I/O ports at a400 [size=16]
Memory at d2cffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] Power Management version 2
0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) SMBus Controller (rev 04)
Subsystem: ASUSTeK Computer Inc.: Unknown device 80a6
Flags: medium devsel
I/O ports at 0400 [size=32]
0000:01:09.0 Multimedia controller: Philips Semiconductors SAA7134 (rev 01)
Subsystem: TERRATEC Electronic GmbH: Unknown device 1158
Flags: bus master, medium devsel, latency 32, IRQ 7
Memory at d2dff800 (32-bit, non-prefetchable)
Capabilities: [40] Power Management version 1
0000:01:0a.0 Ethernet controller: VIA Technologies, Inc. VT6105
[Rhine-III] (rev 86)
Subsystem: D-Link System Inc DFE-530TX rev C
Flags: bus master, medium devsel, latency 32, IRQ 217
I/O ports at b800 [size=d2de0000]
Memory at d2dffc00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at 00010000 [disabled]
Capabilities: [40] Power Management version 2
0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd. Gigabit
Ethernet Controller (rev 19)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8053 Gigabit Ethernet
Controller (Asus)
Flags: bus master, fast devsel, latency 0, IRQ 7
Memory at d2efc000 (64-bit, non-prefetchable) [size=d2ec0000]
I/O ports at c800 [size=256]
Expansion ROM at 00020000 [disabled]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/1
Enable-
Capabilities: [e0] #10 [0011]
0000:04:00.0 VGA compatible controller: nVidia Corporation NV43 [MSI
NX6600GT-TD128E] (rev a2) (prog-if 00 [VGA])
Flags: bus master, fast devsel, latency 0, IRQ 169
Memory at d4000000 (32-bit, non-prefetchable) [size=d2fe0000]
Memory at d8000000 (64-bit, prefetchable) [size=128M]
Memory at d3000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at 00020000 [disabled]
Capabilities: [60] Power Management version 2
Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Capabilities: [78] #10 [0001]
//dmesg output
Linux version 2.6.12-rc1-mm4 (root@ioGL64NX) (gcc-Version 3.4.3-20050110
(Gentoo Linux 3.4.3.20050110-r1, ssp-3.4.3.20050110-0, pie-8.7.7)) #1
SMP PREEMPT Fri Apr 1 03:47:10 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
BIOS-e820: 000000003ffbe000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
ACPI: RSDP (v002 ACPIAM ) @
0x00000000000fafa0
ACPI: XSDT (v001 A M I OEMXSDT 0x02000503 MSFT 0x00000097) @
0x000000003ffb0100
ACPI: FADT (v003 A M I OEMFACP 0x02000503 MSFT 0x00000097) @
0x000000003ffb0290
ACPI: MADT (v001 A M I OEMAPIC 0x02000503 MSFT 0x00000097) @
0x000000003ffb0390
ACPI: OEMB (v001 A M I AMI_OEM 0x02000503 MSFT 0x00000097) @
0x000000003ffbe040
ACPI: MCFG (v001 A M I OEMMCFG 0x02000503 MSFT 0x00000097) @
0x000000003ffb6c40
ACPI: DSDT (v001 A0144 A0144000 0x00000000 INTL 0x02002026) @
0x0000000000000000
On node 0 totalpages: 262064
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 257968 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Initializing CPU#0
Kernel command line: root=/dev/md0 vga=794 console=tty0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 3236.075 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 1025400k/1048256k available (2858k kernel code, 22228k reserved,
1187k data, 208k init)
Calibrating delay loop... 6389.76 BogoMIPS (lpj=3194880)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU0: Thermal monitoring enabled (TM1)
Using IO APIC NMI watchdog
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
Booting processor 1/1 rip 6000 rsp ffff81003ff19f58
Initializing CPU#1
Calibrating delay loop... 6455.29 BogoMIPS (lpj=3227648)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
Total of 2 processors activated (12845.05 BogoMIPS).
activating NMI Watchdog ... done.
Using local APIC timer interrupts.
Detected 12.640 MHz APIC timer.
checking TSC synchronization across 2 CPUs: passed.
time.c: Using PIT/TSC based timekeeping.
Brought up 2 CPUs
CPU0 attaching sched-domain:
domain 0: span 3
groups: 1 2
domain 1: span 3
groups: 3
CPU1 attaching sched-domain:
domain 0: span 3
groups: 2 1
domain 1: span 3
groups: 3
NET: Registered protocol family 16
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:04:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Can't get handler for 0000:00:1b.0
ACPI: Can't get handler for 0000:00:1f.3
ACPI: Can't get handler for 0000:04:00.0
ACPI: Can't get handler for 0000:02:00.0
ACPI: Can't get handler for 0000:01:09.0
ACPI: Can't get handler for 0000:01:0a.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
IA-32 Microcode Update Driver: v1.14 <[email protected]>
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1112328651.185:0): initialized
inotify device minor=63
Initializing Cryptographic API
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
ACPI: No ACPI bus support for pcie00
Allocate Port Service[pcie03]
ACPI: No ACPI bus support for pcie03
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
ACPI: No ACPI bus support for pcie00
Allocate Port Service[pcie02]
ACPI: No ACPI bus support for pcie02
Allocate Port Service[pcie03]
ACPI: No ACPI bus support for pcie03
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
ACPI: No ACPI bus support for pcie00
Allocate Port Service[pcie02]
ACPI: No ACPI bus support for pcie02
Allocate Port Service[pcie03]
ACPI: No ACPI bus support for pcie03
vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20010100000, using
5120k, total 131072k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
ACPI: No ACPI bus support for vesafb.0
fb1: Virtual frame buffer device, using 1024K of video memory
ACPI: No ACPI bus support for vfb.0
ACPI: Processor [CPU1] (supports 8 throttling states)
Real Time Clock Driver v1.12
hw_random: RNG not detected
io scheduler noop registered
io scheduler cfq registered
ACPI: Floppy Controller [FDC] at I/O 0x3f0-0x3f5, 0x3f7 irq 6 dma channel 2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ACPI: No ACPI bus support for floppy.0
RAMDISK driver initialized: 4 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe ([email protected]) and [email protected]
ub: sizeof ub_scsi_cmd 88 ub_dev 2680
usbcore: registered new driver ub
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 21 (level, low) -> IRQ 217
eth0: VIA Rhine III at 0xd2dffc00, 00:0d:88:17:47:40, IRQ 217.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 225
ICH6: chipset revision 4
ICH6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ACPI: No ACPI bus support for 0.0
Probing IDE interface ide1...
hda: ATAPI 94X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
libata version 1.10 loaded.
ata_piix version 1.03
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xAC00 ctl 0xA882 bmdma 0xA400 irq 233
ata2: SATA max UDMA/133 cmd 0xA800 ctl 0xA482 bmdma 0xA408 irq 233
ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
88:20ff
ata1: dev 0 ATA, max UDMA7, 234493056 sectors: lba48
ata1: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
88:20ff
ata1: dev 1 ATA, max UDMA7, 312581808 sectors: lba48
ata1: dev 0 configured for UDMA/133
ata1: dev 1 configured for UDMA/133
scsi0 : ata_piix
ata2: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
88:20ff
ata2: dev 0 ATA, max UDMA7, 234493056 sectors: lba48
ata2: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
88:20ff
ata2: dev 1 ATA, max UDMA7, 312581808 sectors: lba48
ata2: dev 0 configured for UDMA/133
ata2: dev 1 configured for UDMA/133
scsi1 : ata_piix
Vendor: ATA Model: SAMSUNG SP1213C Rev: SV10
Type: Direct-Access ANSI SCSI revision: 05
ACPI: No ACPI bus support for 0:0:0:0
Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
Type: Direct-Access ANSI SCSI revision: 05
ACPI: No ACPI bus support for 0:0:1:0
Vendor: ATA Model: SAMSUNG SP1213C Rev: SV10
Type: Direct-Access ANSI SCSI revision: 05
ACPI: No ACPI bus support for 1:0:0:0
Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
Type: Direct-Access ANSI SCSI revision: 05
ACPI: No ACPI bus support for 1:0:1:0
SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 < sdb5 >
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
SCSI device sdc: 234493056 512-byte hdwr sectors (120060 MB)
Losing some ticks... checking if CPU frequency changed.
SCSI device sdc: drive cache: write back
SCSI device sdc: 234493056 512-byte hdwr sectors (120060 MB)
SCSI device sdc: drive cache: write back
sdc: sdc1 sdc2 < sdc5 sdc6 >
Attached scsi disk sdc at scsi1, channel 0, id 0, lun 0
SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdd: drive cache: write back
SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdd: drive cache: write back
sdd: sdd1
Attached scsi disk sdd at scsi1, channel 0, id 1, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0, type 0
Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 0, type 0
Attached scsi generic sg3 at scsi1, channel 0, id 1, lun 0, type 0
usbmon: debugs is not available
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 50, io mem 0xd2cff800
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
ACPI: No ACPI bus support for usb1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ACPI: No ACPI bus support for 1-0:1.0
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 50, io base 0x00009880
ACPI: No ACPI bus support for usb2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: No ACPI bus support for 2-0:1.0
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 233, io base 0x00009c00
ACPI: No ACPI bus support for usb3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: No ACPI bus support for 3-0:1.0
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 225, io base 0x0000a000
ACPI: No ACPI bus support for usb4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: No ACPI bus support for 4-0:1.0
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000a080
ACPI: No ACPI bus support for usb5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: No ACPI bus support for 5-0:1.0
Initializing USB Mass Storage driver...
usb 3-1: new low speed USB device using uhci_hcd and address 2
ACPI: No ACPI bus support for 3-1
ACPI: No ACPI bus support for 3-1:1.0
ACPI: No ACPI bus support for 3-1:1.1
usb 3-2: new low speed USB device using uhci_hcd and address 3
ACPI: No ACPI bus support for 3-2
ACPI: No ACPI bus support for 3-2:1.0
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
input: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on
usb-0000:00:1d.1-1
input: USB HID v1.10 Device [Logitech HID compliant keyboard] on
usb-0000:00:1d.1-1
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:1d.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: generic_sse
generic_sse: 4704.000 MB/sec
raid5: using function: generic_sse (4704.000 MB/sec)
md: multipath personality registered as nr 7
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24
10:33:39 2005 UTC).
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA device list:
#0: HDA Intel at 0xd2cf4000 irq 169
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
ip_conntrack version 2.1 (4094 buckets, 32752 max) - 304 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <[email protected]>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
Testing NMI watchdog ... OK.
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
ACPI wakeup devices:
P0P1 P0P3 P0P4 P0P5 P0P6 P0P7 USB1 USB2 USB3 USB4 EUSB MC97
ACPI: (supports S0 S1 S3 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: considering sdd1 ...
md: adding sdd1 ...
md: adding sdc6 ...
md: sdc5 has different UUID to sdd1
md: adding sdb1 ...
md: adding sda6 ...
md: sda5 has different UUID to sdd1
md: created md1
md: bind<sda6>
md: bind<sdb1>
md: bind<sdc6>
md: bind<sdd1>
md: running: <sdd1><sdc6><sdb1><sda6>
md1: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdd1
raid0: comparing sdd1(14996544) with sdd1(14996544)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sdc6
raid0: comparing sdc6(14996544) with sdd1(14996544)
raid0: EQUAL
raid0: looking at sdb1
raid0: comparing sdb1(14996544) with sdd1(14996544)
raid0: EQUAL
raid0: looking at sda6
raid0: comparing sda6(14996544) with sdd1(14996544)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 59986176 blocks.
raid0 : conf->hash_spacing is 59986176 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: considering sdc5 ...
md: adding sdc5 ...
md: adding sda5 ...
md: created md0
md: bind<sda5>
md: bind<sdc5>
md: running: <sdc5><sda5>
md0: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdc5
raid0: comparing sdc5(30001280) with sdc5(30001280)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sda5
raid0: comparing sda5(30001280) with sdc5(30001280)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 60002560 blocks.
raid0 : conf->hash_spacing is 60002560 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: ... autorun DONE.
ReiserFS: md0: found reiserfs format "3.6" with standard journal
ReiserFS: md0: using ordered data mode
ReiserFS: md0: journal params: device md0, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: md0: checking transaction log (md0)
ReiserFS: md0: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 208k freed
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:04:00.0 to 64
NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-7174 Tue
Mar 22 06:45:40 PST 2005
ReiserFS: sdc1: found reiserfs format "3.6" with standard journal
ReiserFS: sdc1: using ordered data mode
ReiserFS: sdc1: journal params: device sdc1, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sdc1: checking transaction log (sdc1)
ReiserFS: sdc1: Using r5 hash to sort names
Michael Thonke napisał(a):
> Hello,
>
> since the first version of 2.6.12-rc1 and mm[1-4] kernel I can't use any
> of my PCI-Express devices that worked with all 2.6.11.[1-6] kernels.
> It's a real odd right now.
>
> I have 25 computers with an Intel 925XE Chipset based motherboards and
> Intel 6xx CPU on it. So far it does not metter which vendor I choose
> (ASUS,ABIT,MSI etc.) the problem stay the same and spread all over.I
> tried to boot with pci=routeicq but it did not help to get one device
> working with any 2.6.12-rc1-xx kernel. As I mentioned before I tested it
> with on several (over 25 computer) with various motherboards (with
> ASUS,ABIT,MSI etc.) no luck. Its an 64bit system with [EMT64] and
> SMP/SMT and preempt enabled + cpufreq.
>
> My first look was on PCI Routingtable and I found a difference to
> 2.6.11.x working kernel:
>
I've got the same problem with i915 on Asus P5GDC V Deluxe Mainboard.
This fragment of dmesg is from 2.6.12-rc1-mm4 kernel:
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
Boot video device is 0000:00:02.0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Can't get handler for 0000:00:02.0
ACPI: Can't get handler for 0000:00:02.1
ACPI: Can't get handler for 0000:00:1b.0
ACPI: Can't get handler for 0000:00:1f.3
ACPI: Can't get handler for 0000:02:00.0
ACPI: Can't get handler for 0000:01:04.0
ACPI: Can't get handler for 0000:01:0a.0
ACPI: Can't get handler for 0000:01:0b.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: No ACPI bus support for 00:00
ACPI: No ACPI bus support for 00:01
ACPI: No ACPI bus support for 00:02
ACPI: No ACPI bus support for 00:03
ACPI: No ACPI bus support for 00:04
ACPI: No ACPI bus support for 00:05
ACPI: No ACPI bus support for 00:06
ACPI: No ACPI bus support for 00:07
ACPI: No ACPI bus support for 00:08
ACPI: No ACPI bus support for 00:09
ACPI: No ACPI bus support for 00:0a
ACPI: No ACPI bus support for 00:0b
ACPI: No ACPI bus support for 00:0c
ACPI: No ACPI bus support for 00:0d
ACPI: No ACPI bus support for 00:0e
ACPI: No ACPI bus support for 00:0f
ACPI: No ACPI bus support for 00:10
pnp: PnP ACPI: found 17 devices
SCSI subsystem initialized
LSPCI OUTPUT:
00:00.0 Host bridge: Intel Corp.: Unknown device 2580 (rev 04)
Subsystem: Intel Corp.: Unknown device 2580
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] #09 [2109]
00:02.0 VGA compatible controller: Intel Corp.: Unknown device 2582 (rev
04) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 2582
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at cfc80000 (32-bit, non-prefetchable) [size=512K]
I/O ports at 9800 [size=8]
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Memory at cfd80000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 2
00:02.1 Display controller: Intel Corp.: Unknown device 2782 (rev 04)
Subsystem: Asustek Computer, Inc.: Unknown device 2582
Flags: bus master, fast devsel, latency 0
Memory at cfd00000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 2
00:1b.0 Class 0403: Intel Corp.: Unknown device 2668 (rev 03)
Subsystem: Asustek Computer, Inc.: Unknown device 813d
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at cfdf4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [70] #10 [0091]
00:1c.0 PCI bridge: Intel Corp. I/O Controller Hub PCI Express Port 0
(rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
00:1c.1 PCI bridge: Intel Corp. I/O Controller Hub PCI Express Port 1
(rev 03) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: cff00000-cfffffff
Capabilities: [40] #10 [0141]
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
00:1d.0 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03)
(prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at 9880 [size=32]
00:1d.1 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03)
(prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 9c00 [size=32]
00:1d.2 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03)
(prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at a000 [size=32]
00:1d.3 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03)
(prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at a080 [size=32]
00:1d.7 USB Controller: Intel Corp. I/O Controller Hub USB2 (rev 03)
(prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 11
Memory at cfdff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [20a0]
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI
Bridge (rev d3) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000cfff
Memory behind bridge: cfe00000-cfefffff
Capabilities: [50] #0d [0000]
00:1f.0 ISA bridge: Intel Corp. I/O Controller Hub LPC (rev 03)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corp. I/O Controller Hub PATA (rev 03)
(prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at ffa0 [size=16]
00:1f.2 IDE interface: Intel Corp. I/O Controller Hub SATA cc=raid (rev
03) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Asustek Computer, Inc.: Unknown device 2601
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 19
I/O ports at ac00 [size=8]
I/O ports at a880 [size=4]
I/O ports at a800 [size=8]
I/O ports at a480 [size=4]
I/O ports at a400 [size=16]
Memory at cfdffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [70] Power Management version 2
00:1f.3 SMBus: Intel Corp. I/O Controller Hub SMBus (rev 03)
Subsystem: Asustek Computer, Inc.: Unknown device 80a6
Flags: medium devsel
I/O ports at 0400 [size=32]
01:04.0 Unknown mass storage controller: Integrated Technology Express,
Inc.: Unknown device 8212 (rev 13)
Subsystem: Asustek Computer, Inc.: Unknown device 813a
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 11
I/O ports at cc00 [size=8]
I/O ports at c080 [size=4]
I/O ports at c000 [size=8]
I/O ports at bc00 [size=4]
I/O ports at b880 [size=16]
Expansion ROM at cfec0000 [disabled] [size=128K]
Capabilities: [80] Power Management version 2
01:0a.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
Flags: bus master, medium devsel, latency 64, IRQ 21
I/O ports at c400 [size=256]
Capabilities: [c0] Power Management version 2
01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown
device 8180 (rev 20)
Subsystem: Realtek Semiconductor Co., Ltd.: Unknown device 8180
Flags: bus master, medium devsel, latency 64, IRQ 22
I/O ports at c800 [size=256]
Memory at cfeffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
02:00.0 Ethernet controller: Marvell: Unknown device 4362 (rev 15)
Subsystem: Asustek Computer, Inc.: Unknown device 8142
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at cfffc000 (64-bit, non-prefetchable) [size=16K]
I/O ports at d800 [size=256]
Expansion ROM at cffc0000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
Capabilities: [e0] #10 [0011]
hello Jacek,
its not related to the vendor so far we are :-)
Maybe Andrew Morton or some other will read this. Because 2.6.12 should
be a stable version not a flacky one. But what is wrong now on
2.6.12-rc1 **. It work flawlessly on 2.6.11.X kernels.
Mebye we back that out :-)
Greetz
|Jacek Luczak schrieb:
> Michael Thonke napisał(a):
>
>> Hello,
>>
>> since the first version of 2.6.12-rc1 and mm[1-4] kernel I can't use any
>> of my PCI-Express devices that worked with all 2.6.11.[1-6] kernels.
>> It's a real odd right now.
>>
>> I have 25 computers with an Intel 925XE Chipset based motherboards
>> and Intel 6xx CPU on it. So far it does not metter which vendor I
>> choose (ASUS,ABIT,MSI etc.) the problem stay the same and spread all
>> over.I
>> tried to boot with pci=routeicq but it did not help to get one device
>> working with any 2.6.12-rc1-xx kernel. As I mentioned before I tested
>> it with on several (over 25 computer) with various motherboards (with
>> ASUS,ABIT,MSI etc.) no luck. Its an 64bit system with [EMT64] and
>> SMP/SMT and preempt enabled + cpufreq.
>>
>> My first look was on PCI Routingtable and I found a difference to
>> 2.6.11.x working kernel:
>>
>
> I've got the same problem with i915 on Asus P5GDC V Deluxe Mainboard.
> This fragment of dmesg is from 2.6.12-rc1-mm4 kernel:
> PCI: Probing PCI hardware (bus 00)
> ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
> Boot video device is 0000:00:02.0
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: Can't get handler for 0000:00:02.0
> ACPI: Can't get handler for 0000:00:02.1
> ACPI: Can't get handler for 0000:00:1b.0
> ACPI: Can't get handler for 0000:00:1f.3
> ACPI: Can't get handler for 0000:02:00.0
> ACPI: Can't get handler for 0000:01:04.0
> ACPI: Can't get handler for 0000:01:0a.0
> ACPI: Can't get handler for 0000:01:0b.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: No ACPI bus support for 00:00
> ACPI: No ACPI bus support for 00:01
> ACPI: No ACPI bus support for 00:02
> ACPI: No ACPI bus support for 00:03
> ACPI: No ACPI bus support for 00:04
> ACPI: No ACPI bus support for 00:05
> ACPI: No ACPI bus support for 00:06
> ACPI: No ACPI bus support for 00:07
> ACPI: No ACPI bus support for 00:08
> ACPI: No ACPI bus support for 00:09
> ACPI: No ACPI bus support for 00:0a
> ACPI: No ACPI bus support for 00:0b
> ACPI: No ACPI bus support for 00:0c
> ACPI: No ACPI bus support for 00:0d
> ACPI: No ACPI bus support for 00:0e
> ACPI: No ACPI bus support for 00:0f
> ACPI: No ACPI bus support for 00:10
> pnp: PnP ACPI: found 17 devices
> SCSI subsystem initialized
>
> LSPCI OUTPUT:
> 00:00.0 Host bridge: Intel Corp.: Unknown device 2580 (rev 04)
> Subsystem: Intel Corp.: Unknown device 2580
> Flags: bus master, fast devsel, latency 0
> Capabilities: [e0] #09 [2109]
>
> 00:02.0 VGA compatible controller: Intel Corp.: Unknown device 2582
> (rev 04) (prog-if 00 [VGA])
> Subsystem: Asustek Computer, Inc.: Unknown device 2582
> Flags: bus master, fast devsel, latency 0, IRQ 16
> Memory at cfc80000 (32-bit, non-prefetchable) [size=512K]
> I/O ports at 9800 [size=8]
> Memory at d0000000 (32-bit, prefetchable) [size=256M]
> Memory at cfd80000 (32-bit, non-prefetchable) [size=256K]
> Expansion ROM at <unassigned> [disabled]
> Capabilities: [d0] Power Management version 2
>
> 00:02.1 Display controller: Intel Corp.: Unknown device 2782 (rev 04)
> Subsystem: Asustek Computer, Inc.: Unknown device 2582
> Flags: bus master, fast devsel, latency 0
> Memory at cfd00000 (32-bit, non-prefetchable) [size=512K]
> Capabilities: [d0] Power Management version 2
>
> 00:1b.0 Class 0403: Intel Corp.: Unknown device 2668 (rev 03)
> Subsystem: Asustek Computer, Inc.: Unknown device 813d
> Flags: bus master, fast devsel, latency 0, IRQ 10
> Memory at cfdf4000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [50] Power Management version 2
> Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
> Enable-
> Capabilities: [70] #10 [0091]
>
> 00:1c.0 PCI bridge: Intel Corp. I/O Controller Hub PCI Express Port 0
> (rev 03) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> I/O behind bridge: 0000e000-0000efff
> Capabilities: [40] #10 [0141]
> Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
> Enable-
> Capabilities: [90] #0d [0000]
> Capabilities: [a0] Power Management version 2
>
> 00:1c.1 PCI bridge: Intel Corp. I/O Controller Hub PCI Express Port 1
> (rev 03) (prog-if 00 [Normal decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: cff00000-cfffffff
> Capabilities: [40] #10 [0141]
> Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
> Enable-
> Capabilities: [90] #0d [0000]
> Capabilities: [a0] Power Management version 2
>
> 00:1d.0 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03)
> (prog-if 00 [UHCI])
> Subsystem: Asustek Computer, Inc.: Unknown device 80a6
> Flags: bus master, medium devsel, latency 0, IRQ 23
> I/O ports at 9880 [size=32]
>
> 00:1d.1 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03)
> (prog-if 00 [UHCI])
> Subsystem: Asustek Computer, Inc.: Unknown device 80a6
> Flags: bus master, medium devsel, latency 0, IRQ 19
> I/O ports at 9c00 [size=32]
>
> 00:1d.2 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03)
> (prog-if 00 [UHCI])
> Subsystem: Asustek Computer, Inc.: Unknown device 80a6
> Flags: bus master, medium devsel, latency 0, IRQ 18
> I/O ports at a000 [size=32]
>
> 00:1d.3 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03)
> (prog-if 00 [UHCI])
> Subsystem: Asustek Computer, Inc.: Unknown device 80a6
> Flags: bus master, medium devsel, latency 0, IRQ 16
> I/O ports at a080 [size=32]
>
> 00:1d.7 USB Controller: Intel Corp. I/O Controller Hub USB2 (rev 03)
> (prog-if 20 [EHCI])
> Subsystem: Asustek Computer, Inc.: Unknown device 80a6
> Flags: bus master, medium devsel, latency 0, IRQ 11
> Memory at cfdff800 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [50] Power Management version 2
> Capabilities: [58] #0a [20a0]
>
> 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to
> PCI Bridge (rev d3) (prog-if 01 [Subtractive decode])
> Flags: bus master, fast devsel, latency 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> I/O behind bridge: 0000b000-0000cfff
> Memory behind bridge: cfe00000-cfefffff
> Capabilities: [50] #0d [0000]
>
> 00:1f.0 ISA bridge: Intel Corp. I/O Controller Hub LPC (rev 03)
> Flags: bus master, medium devsel, latency 0
>
> 00:1f.1 IDE interface: Intel Corp. I/O Controller Hub PATA (rev 03)
> (prog-if 8a [Master SecP PriP])
> Subsystem: Asustek Computer, Inc.: Unknown device 80a6
> Flags: bus master, medium devsel, latency 0, IRQ 18
> I/O ports at <unassigned>
> I/O ports at <unassigned>
> I/O ports at <unassigned>
> I/O ports at <unassigned>
> I/O ports at ffa0 [size=16]
>
> 00:1f.2 IDE interface: Intel Corp. I/O Controller Hub SATA cc=raid
> (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
> Subsystem: Asustek Computer, Inc.: Unknown device 2601
> Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 19
> I/O ports at ac00 [size=8]
> I/O ports at a880 [size=4]
> I/O ports at a800 [size=8]
> I/O ports at a480 [size=4]
> I/O ports at a400 [size=16]
> Memory at cfdffc00 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [70] Power Management version 2
>
> 00:1f.3 SMBus: Intel Corp. I/O Controller Hub SMBus (rev 03)
> Subsystem: Asustek Computer, Inc.: Unknown device 80a6
> Flags: medium devsel
> I/O ports at 0400 [size=32]
>
> 01:04.0 Unknown mass storage controller: Integrated Technology
> Express, Inc.: Unknown device 8212 (rev 13)
> Subsystem: Asustek Computer, Inc.: Unknown device 813a
> Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 11
> I/O ports at cc00 [size=8]
> I/O ports at c080 [size=4]
> I/O ports at c000 [size=8]
> I/O ports at bc00 [size=4]
> I/O ports at b880 [size=16]
> Expansion ROM at cfec0000 [disabled] [size=128K]
> Capabilities: [80] Power Management version 2
>
> 01:0a.0 Multimedia audio controller: C-Media Electronics Inc CM8738
> (rev 10)
> Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
> Flags: bus master, medium devsel, latency 64, IRQ 21
> I/O ports at c400 [size=256]
> Capabilities: [c0] Power Management version 2
>
> 01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown
> device 8180 (rev 20)
> Subsystem: Realtek Semiconductor Co., Ltd.: Unknown device 8180
> Flags: bus master, medium devsel, latency 64, IRQ 22
> I/O ports at c800 [size=256]
> Memory at cfeffc00 (32-bit, non-prefetchable) [size=256]
> Capabilities: [50] Power Management version 2
>
> 02:00.0 Ethernet controller: Marvell: Unknown device 4362 (rev 15)
> Subsystem: Asustek Computer, Inc.: Unknown device 8142
> Flags: bus master, fast devsel, latency 0, IRQ 17
> Memory at cfffc000 (64-bit, non-prefetchable) [size=16K]
> I/O ports at d800 [size=256]
> Expansion ROM at cffc0000 [disabled] [size=128K]
> Capabilities: [48] Power Management version 2
> Capabilities: [50] Vital Product Data
> Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/1
> Enable-
> Capabilities: [e0] #10 [0011]
>
>
>
>
hello Michael :)
This message:
ACPI: No ACPI bus support for 00:00
means that acpi_get_bus_type() is unable to determinate
bus type! Mayby someone forgot about PCI-E?
Regards
Jacek
Hello Jacek,
I finially got it working :-) my PCI-Express devices working now...
I grabbed the last bk-snapshot from kernel.org 2.6.12-rc1-bk3 and et volia
everything except the Marvell Yokon PCI-E device working.
I hope Andrew will look into the mm-line to find the bug?
Greets and
Best regards
|Jacek Luczak schrieb:
> hello Michael :)
>
> This message:
>
> ACPI: No ACPI bus support for 00:00
>
> means that acpi_get_bus_type() is unable to determinate
> bus type! Mayby someone forgot about PCI-E?
>
> Regards
> Jacek
Michael Thonke napisał(a):
> Hello Jacek,
>
> I finially got it working :-) my PCI-Express devices working now...
> I grabbed the last bk-snapshot from kernel.org 2.6.12-rc1-bk3 and et volia
> everything except the Marvell Yokon PCI-E device working.
> I hope Andrew will look into the mm-line to find the bug?
>
I've got Marvell Yukon 88E8053 GigE and it works fine with fixed (by
myself :]) driver from syskonnect. If you wont I may send it to you!
Jacek
On Fri, 2005-04-01 at 21:23 +0200, Jacek Luczak wrote:
> Michael Thonke napisa?(a):
> > Hello Jacek,
> >
> > I finially got it working :-) my PCI-Express devices working now...
> > I grabbed the last bk-snapshot from kernel.org 2.6.12-rc1-bk3 and et volia
> > everything except the Marvell Yokon PCI-E device working.
> > I hope Andrew will look into the mm-line to find the bug?
> >
>
> I've got Marvell Yukon 88E8053 GigE and it works fine with fixed (by
> myself :]) driver from syskonnect. If you wont I may send it to you!
Please post your patch here and copy the maintainers:
MARVELL YUKON / SYSKONNECT DRIVER
P: Mirko Lindner
M: [email protected]
P: Ralph Roesler
M: [email protected]
W: http://www.syskonnect.com
S: Supported
Bjorn Helgaas wrote:
> On Fri, 2005-04-01 at 21:23 +0200, Jacek Luczak wrote:
>
>>Michael Thonke napisa?(a):
>>
>>>Hello Jacek,
>>>
>>>I finially got it working :-) my PCI-Express devices working now...
>>>I grabbed the last bk-snapshot from kernel.org 2.6.12-rc1-bk3 and et volia
>>>everything except the Marvell Yokon PCI-E device working.
>>>I hope Andrew will look into the mm-line to find the bug?
>>>
>>
>>I've got Marvell Yukon 88E8053 GigE and it works fine with fixed (by
>>myself :]) driver from syskonnect. If you wont I may send it to you!
>
>
> Please post your patch here and copy the maintainers:
>
> MARVELL YUKON / SYSKONNECT DRIVER
> P: Mirko Lindner
> M: [email protected]
> P: Ralph Roesler
> M: [email protected]
> W: http://www.syskonnect.com
> S: Supported
>
>
>
Hi
I sent my patch to Mirko about 3 weeks ago. Mirko replied that he
consider it. Since that time new version of sk98lin driver appeared.
Version from syskonnect site require only changing usage of
pci_dev->slot_name to pci_name(pci_dev) in skge.c and skethtool.c. After
that everything should work fine. So I think there is no need to post my
path here but if you really whant I may do this. Whole path agains
2.6.12-rc2 take about 1.2 MB (diffstat attached below).
Jacek
---
drivers/net/Kconfig | 113 -
drivers/net/sk98lin/Makefile | 64
drivers/net/sk98lin/h/lm80.h | 4
drivers/net/sk98lin/h/skaddr.h | 4
drivers/net/sk98lin/h/skcsum.h | 6
drivers/net/sk98lin/h/skdebug.h | 20
drivers/net/sk98lin/h/skdrv1st.h | 41
drivers/net/sk98lin/h/skdrv2nd.h | 978 ++++++---
drivers/net/sk98lin/h/skerror.h | 12
drivers/net/sk98lin/h/skgedrv.h | 4
drivers/net/sk98lin/h/skgehw.h | 1377 ++++++++++---
drivers/net/sk98lin/h/skgehwt.h | 4
drivers/net/sk98lin/h/skgei2c.h | 210 --
drivers/net/sk98lin/h/skgeinit.h | 369 ++-
drivers/net/sk98lin/h/skgepnm2.h | 12
drivers/net/sk98lin/h/skgepnmi.h | 141 -
drivers/net/sk98lin/h/skgesirq.h | 40
drivers/net/sk98lin/h/skgetwsi.h | 241 ++
drivers/net/sk98lin/h/ski2c.h | 177 -
drivers/net/sk98lin/h/skqueue.h | 13
drivers/net/sk98lin/h/skrlmt.h | 4
drivers/net/sk98lin/h/sktimer.h | 4
drivers/net/sk98lin/h/sktwsi.h | 177 +
drivers/net/sk98lin/h/sktypes.h | 62
drivers/net/sk98lin/h/skversion.h | 34
drivers/net/sk98lin/h/skvpd.h | 84
drivers/net/sk98lin/h/sky2le.h | 891 ++++++++
drivers/net/sk98lin/h/xmac_ii.h | 621 +++---
drivers/net/sk98lin/sk98lin.txt | 203 +-
drivers/net/sk98lin/skaddr.c | 79
drivers/net/sk98lin/skcsum.c | 6
drivers/net/sk98lin/skdim.c | 1027 +++-------
drivers/net/sk98lin/skethtool.c | 1379 ++++++++++---
drivers/net/sk98lin/skge.c | 3779
++++++++++++++++++++++++--------------
drivers/net/sk98lin/skgehwt.c | 52
drivers/net/sk98lin/skgeinit.c | 1683 ++++++++++++----
drivers/net/sk98lin/skgemib.c | 186 +
drivers/net/sk98lin/skgepnmi.c | 2282 +++++++++++-----------
drivers/net/sk98lin/skgesirq.c | 1244 +++++++-----
drivers/net/sk98lin/ski2c.c | 1296 -------------
drivers/net/sk98lin/sklm80.c | 10
drivers/net/sk98lin/skproc.c | 587 ++++-
drivers/net/sk98lin/skqueue.c | 103 -
drivers/net/sk98lin/skrlmt.c | 258 +-
drivers/net/sk98lin/sktimer.c | 61
drivers/net/sk98lin/sktwsi.c | 1355 +++++++++++++
drivers/net/sk98lin/skvpd.c | 195 +
drivers/net/sk98lin/skxmac2.c | 2235 +++++++++++++---------
drivers/net/sk98lin/sky2.c | 2728 +++++++++++++++++++++++++++
drivers/net/sk98lin/sky2le.c | 510 +++++
50 files changed, 18204 insertions(+), 8761 deletions(-)
> Version from syskonnect site require only changing usage of
> pci_dev->slot_name to pci_name(pci_dev) in skge.c and skethtool.c. After
> that everything should work fine. So I think there is no need to post my
> path here but if you really whant I may do this. Whole path agains
> 2.6.12-rc2 take about 1.2 MB (diffstat attached below).
I agree, no need to post a whole 1.2MB patch (goodness, what's
in this driver, anyway, that it would need a 1.2MB *patch*? :-))
But you seem to be saying that the driver from syskonnect (and possibly
the one in 2.6.12-rc1-bk3 as well) does not work as-is, and that you have
a small patch that makes it work.
If so, I think it's worth posting the small patch, so other users
of the device can at least get it working until syskonnect gets
things squared away.
My apologies if I'm misunderstanding the situation.
--- linux-2.6.12-rc2/drivers/net/sk98lin/skge.c 2005-04-09 14:49:39.000000000 +0200
+++ linux/drivers/net/sk98lin/skge.c 2005-04-09 02:04:49.000000000 +0200
@@ -4026,7 +4026,7 @@
*/
* ((SK_U32 *)pMemBuf) = 0;
* ((SK_U32 *)pMemBuf + 1) = pdev->bus->number;
- * ((SK_U32 *)pMemBuf + 2) = ParseDeviceNbrFromSlotName(pdev->slot_name);
+ * ((SK_U32 *)pMemBuf + 2) = ParseDeviceNbrFromSlotName(pci_name(pdev));
if(copy_to_user(Ioctl.pData, pMemBuf, Length) ) {
Err = -EFAULT;
goto fault_diag;
--- linux-2.6.12-rc2/drivers/net/sk98lin/skethtool.c 2005-04-09 14:49:39.000000000 +0200
+++ linux/drivers/net/sk98lin/skethtool.c 2005-04-09 02:04:49.000000000 +0200
@@ -1136,7 +1136,7 @@
strncpy(edrvinfo->driver, DRIVER_FILE_NAME , 32);
strncpy(edrvinfo->version, versionString , 32);
strncpy(edrvinfo->fw_version, "N/A", 32);
- strncpy(edrvinfo->bus_info, pAC->PciDev->slot_name, 32);
+ strncpy(edrvinfo->bus_info, pci_name(pAC->PciDev), 32);
#ifdef ETHTOOL_GSTATS
edrvinfo->n_stats = SK98LIN_STATS_LEN;
#endif