Hi,
My HP notebook decided that its BIOS upgrade would break
speedstep-centrino, and trying to load the module gives me a "no such
device" error. This is with various combinations of kernel config
relating to cpufreq. Also tried acpi-cpufreq with the same error.
I suspect that the new bios is broken, but perhaps it's correct and the
linux driver is missing something?
Anyway, relevent info below.
Cheers,
Ben
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 14
model name : Genuine Intel(R) CPU T2400 @ 1.83GHz
stepping : 8
cpu MHz : 1829.084
cache size : 2048 KB
physical id : 0
siblings : 1
core id : 255
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc pni monitor vmx est tm2 xtpr
bogomips : 3663.73
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 14
model name : Genuine Intel(R) CPU T2400 @ 1.83GHz
stepping : 8
cpu MHz : 1829.084
cache size : 2048 KB
physical id : 1
siblings : 1
core id : 255
cpu cores : 1
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc pni monitor vmx est tm2 xtpr
bogomips : 3657.75
[17179569.184000] Linux version 2.6.17-6-686 (root@rothera) (gcc version 4.1.2 20060715 (prerelease) (Ubuntu 4.1.1-9ubuntu1)) #2 SMP Fri Aug 11 22:09:15 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
[17179569.184000] BIOS-e820: 000000003f7d0000 - 000000003f7e5600 (reserved)
[17179569.184000] BIOS-e820: 000000003f7e5600 - 000000003f7f8000 (ACPI NVS)
[17179569.184000] BIOS-e820: 000000003f7f8000 - 000000003f800000 (reserved)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
[17179569.184000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[17179569.184000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[17179569.184000] 119MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 260048
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 225280 pages, LIFO batch:31
[17179569.184000] HighMem zone: 30672 pages, LIFO batch:7
[17179569.184000] DMI 2.4 present.
[17179569.184000] ACPI: RSDP (v002 HP ) @ 0x000f7c10
[17179569.184000] ACPI: XSDT (v001 HP 30AD 0x10080620 HP 0x00000001) @ 0x3f7e57b8
[17179569.184000] ACPI: FADT (v004 HP 30AD 0x00000003 HP 0x00000001) @ 0x3f7e5684
[17179569.184000] ACPI: MADT (v001 HP 30AD 0x00000001 HP 0x00000001) @ 0x3f7e5814
[17179569.184000] ACPI: MCFG (v001 HP 30AD 0x00000001 HP 0x00000001) @ 0x3f7e587c
[17179569.184000] ACPI: TCPA (v002 HP 30AD 0x00000001 HP 0x00000001) @ 0x3f7e58b8
[17179569.184000] ACPI: SSDT (v001 HP HPQNLP 0x00000001 MSFT 0x0100000e) @ 0x3f7f4f3d
[17179569.184000] ACPI: SSDT (v001 HP HPQSAT 0x00000001 MSFT 0x0100000e) @ 0x3f7f4f96
[17179569.184000] ACPI: DSDT (v001 HP nc6400 0x00010000 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x1008
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 6:14 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 6:14 APIC version 20
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 40000000 (gap: 3f800000:bf400000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sda1 ro single
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 1829.084 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.976000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.976000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.996000] Memory: 1018444k/1040192k available (1890k kernel code, 21004k reserved, 1031k data, 308k init, 122688k highmem)
[17179569.996000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.076000] Calibrating delay using timer specific routine.. 3663.73 BogoMIPS (lpj=7327463)
[17179570.076000] Security Framework v1.0.0 initialized
[17179570.076000] SELinux: Disabled at boot.
[17179570.076000] Mount-cache hash table entries: 512
[17179570.076000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[17179570.076000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[17179570.076000] monitor/mwait feature present.
[17179570.076000] using mwait in idle threads.
[17179570.076000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179570.076000] CPU: L2 cache: 2048K
[17179570.076000] CPU: Hyper-Threading is disabled
[17179570.076000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000
[17179570.076000] Checking 'hlt' instruction... OK.
[17179570.092000] SMP alternatives: switching to UP code
[17179570.092000] checking if image is initramfs... it is
[17179570.820000] Freeing initrd memory: 8335k freed
[17179570.820000] ACPI: Looking for DSDT ... not found!
[17179570.896000] CPU0: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
[17179570.896000] SMP alternatives: switching to SMP code
[17179570.896000] Booting processor 1/1 eip 3000
[17179570.908000] Initializing CPU#1
[17179570.988000] Calibrating delay using timer specific routine.. 3657.75 BogoMIPS (lpj=7315519)
[17179570.988000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[17179570.988000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
[17179570.988000] monitor/mwait feature present.
[17179570.988000] CPU: L1 I cache: 32K, L1 D cache: 32K
[17179570.988000] CPU: L2 cache: 2048K
[17179570.988000] CPU: Hyper-Threading is disabled
[17179570.988000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140 0000c1a9 00000000 00000000
[17179570.988000] CPU1: Intel Genuine Intel(R) CPU T2400 @ 1.83GHz stepping 08
[17179570.988000] Total of 2 processors activated (7321.49 BogoMIPS).
[17179570.988000] ENABLING IO-APIC IRQs
[17179570.988000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179571.132000] checking TSC synchronization across 2 CPUs: passed.
[17179571.136000] Brought up 2 CPUs
[17179571.248000] migration_cost=4000
[17179571.248000] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[17179571.248000] NET: Registered protocol family 16
[17179571.248000] EISA bus registered
[17179571.248000] ACPI: bus type pci registered
[17179571.248000] PCI: BIOS Bug: MCFG area is not E820-reserved
[17179571.248000] PCI: Not using MMCONFIG.
[17179571.248000] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32
[17179571.248000] Setting up standard PCI resources
[17179571.248000] ACPI: Subsystem revision 20060127
[17179571.248000] ACPI Error (evgpeblk-0284): Unknown GPE method type: C341 (name not of form _Lxx or _Exx) [20060127]
[17179571.248000] ACPI Error (evgpeblk-0284): Unknown GPE method type: C23A (name not of form _Lxx or _Exx) [20060127]
[17179571.248000] ACPI Error (evgpeblk-0284): Unknown GPE method type: C342 (name not of form _Lxx or _Exx) [20060127]
[17179571.248000] ACPI Error (evgpeblk-0284): Unknown GPE method type: C343 (name not of form _Lxx or _Exx) [20060127]
[17179571.248000] ACPI Error (evgpeblk-0284): Unknown GPE method type: C26F (name not of form _Lxx or _Exx) [20060127]
[17179571.304000] ACPI: Interpreter enabled
[17179571.304000] ACPI: Using IOAPIC for interrupt routing
[17179571.304000] ACPI: PCI Root Bridge [C002] (0000:00)
[17179571.304000] PCI: Probing PCI hardware (bus 00)
[17179571.304000] ACPI: Assume root bridge [\_SB_.C002] bus is 0
[17179571.312000] Boot video device is 0000:00:02.0
[17179571.312000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179571.316000] PCI: Transparent bridge - 0000:00:1e.0
[17179571.316000] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses')
[17179571.316000] Please report the result to linux-kernel to fix this permanently
[17179571.316000] ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
[17179571.348000] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C093._PRT]
[17179571.352000] ACPI: Embedded Controller [C005] (gpe 22) interrupt mode.
[17179571.364000] ACPI: Power Resource [C1E6] (on)
[17179571.364000] ACPI: Power Resource [C1ED] (on)
[17179571.368000] ACPI: Power Resource [C213] (on)
[17179571.368000] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C0F9._PRT]
[17179571.368000] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C109._PRT]
[17179571.368000] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C10F._PRT]
[17179571.372000] ACPI: Power Resource [C21B] (on)
[17179571.372000] ACPI: PCI Interrupt Link [C105] (IRQs *10 11)
[17179571.372000] ACPI: PCI Interrupt Link [C106] (IRQs *10 11)
[17179571.372000] ACPI: PCI Interrupt Link [C107] (IRQs 10 *11)
[17179571.372000] ACPI: PCI Interrupt Link [C108] (IRQs 10 11) *5
[17179571.376000] ACPI: PCI Interrupt Link [C11B] (IRQs *10 11)
[17179571.376000] ACPI: PCI Interrupt Link [C11C] (IRQs *10 11)
[17179571.376000] ACPI: PCI Interrupt Link [C11D] (IRQs 10 *11)
[17179571.380000] ACPI: Power Resource [C31A] (off)
[17179571.380000] ACPI: Power Resource [C31B] (off)
[17179571.380000] ACPI: Power Resource [C31C] (off)
[17179571.380000] ACPI: Power Resource [C31D] (off)
[17179571.380000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.380000] pnp: PnP ACPI init
[17179571.388000] pnp: PnP ACPI: found 15 devices
[17179571.388000] PnPBIOS: Disabled by ACPI PNP
[17179571.388000] PCI: Using ACPI for IRQ routing
[17179571.388000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179571.516000] pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved
[17179571.516000] pnp: 00:0d: ioport range 0x1000-0x107f could not be reserved
[17179571.516000] pnp: 00:0d: ioport range 0x1100-0x113f has been reserved
[17179571.516000] pnp: 00:0d: ioport range 0x1200-0x121f has been reserved
[17179571.516000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[17179571.516000] PCI: Bridge: 0000:00:1c.0
[17179571.520000] IO window: disabled.
[17179571.520000] MEM window: f4100000-f41fffff
[17179571.520000] PREFETCH window: disabled.
[17179571.520000] PCI: Bridge: 0000:00:1c.1
[17179571.520000] IO window: disabled.
[17179571.520000] MEM window: f4000000-f40fffff
[17179571.520000] PREFETCH window: disabled.
[17179571.520000] PCI: Bridge: 0000:00:1c.3
[17179571.520000] IO window: 2000-3fff
[17179571.520000] MEM window: f0000000-f3ffffff
[17179571.520000] PREFETCH window: disabled.
[17179571.520000] PCI: Bus 3, cardbus bridge: 0000:02:06.0
[17179571.520000] IO window: 00005000-000050ff
[17179571.520000] IO window: 00005400-000054ff
[17179571.520000] PREFETCH window: 40000000-41ffffff
[17179571.520000] MEM window: 42000000-43ffffff
[17179571.520000] PCI: Bridge: 0000:00:1e.0
[17179571.520000] IO window: 5000-5fff
[17179571.520000] MEM window: f4200000-f45fffff
[17179571.520000] PREFETCH window: 40000000-41ffffff
[17179571.520000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 177
[17179571.520000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179571.520000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 185
[17179571.520000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179571.520000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 193
[17179571.520000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[17179571.520000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179571.520000] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 201
[17179571.520000] NET: Registered protocol family 2
[17179571.564000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179571.564000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179571.564000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179571.564000] TCP: Hash tables configured (established 131072 bind 65536)
[17179571.564000] TCP reno registered
[17179571.564000] audit: initializing netlink socket (disabled)
[17179571.564000] audit(1158088397.564:1): initialized
[17179571.564000] highmem bounce pool size: 64 pages
[17179571.564000] VFS: Disk quotas dquot_6.5.1
[17179571.564000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.564000] Initializing Cryptographic API
[17179571.564000] io scheduler noop registered
[17179571.564000] io scheduler anticipatory registered
[17179571.564000] io scheduler deadline registered
[17179571.564000] io scheduler cfq registered (default)
[17179571.564000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 177
[17179571.568000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179571.568000] assign_interrupt_mode Found MSI capability
[17179571.568000] Allocate Port Service[0000:00:1c.0:pcie00]
[17179571.568000] Allocate Port Service[0000:00:1c.0:pcie02]
[17179571.568000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 185
[17179571.568000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179571.568000] assign_interrupt_mode Found MSI capability
[17179571.568000] Allocate Port Service[0000:00:1c.1:pcie00]
[17179571.568000] Allocate Port Service[0000:00:1c.1:pcie02]
[17179571.568000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 193
[17179571.568000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[17179571.568000] assign_interrupt_mode Found MSI capability
[17179571.568000] Allocate Port Service[0000:00:1c.3:pcie00]
[17179571.568000] Allocate Port Service[0000:00:1c.3:pcie02]
[17179571.568000] isapnp: Scanning for PnP cards...
[17179571.924000] isapnp: No Plug & Play device found
[17179571.940000] Real Time Clock Driver v1.12ac
[17179571.940000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.944000] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[17179571.944000] mice: PS/2 mouse device common for all mice
[17179571.944000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.944000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.944000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.944000] PNP: PS/2 Controller [PNP0303:C210,PNP0f13:C211] at 0x60,0x64 irq 1,12
[17179571.944000] i8042.c: Detected active multiplexing controller, rev 1.1.
[17179571.948000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[17179571.948000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[17179571.948000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[17179571.948000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[17179571.948000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.948000] EISA: Probing bus 0 at eisa.0
[17179571.948000] Cannot allocate resource for EISA slot 1
[17179571.948000] Cannot allocate resource for EISA slot 2
[17179571.948000] Cannot allocate resource for EISA slot 3
[17179571.948000] Cannot allocate resource for EISA slot 4
[17179571.948000] Cannot allocate resource for EISA slot 5
[17179571.948000] EISA: Detected 0 cards.
[17179571.948000] TCP bic registered
[17179571.948000] NET: Registered protocol family 1
[17179571.948000] NET: Registered protocol family 8
[17179571.948000] NET: Registered protocol family 20
[17179571.948000] Starting balanced_irq
[17179571.948000] Using IPI No-Shortcut mode
[17179571.948000] ACPI wakeup devices:
[17179571.948000] C093 C0EF C0F0 C0F1 C0F2 C0F9 C21C C109 C227 C10F C228
[17179571.948000] ACPI: (supports S0 S3 S4 S5)
[17179571.948000] Freeing unused kernel memory: 308k freed
[17179571.976000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179571.996000] usbcore: registered new driver usbfs
[17179571.996000] usbcore: registered new driver hub
[17179572.000000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 50
[17179572.000000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179572.000000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179572.000000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[17179572.000000] ehci_hcd 0000:00:1d.7: debug port 1
[17179572.000000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[17179572.000000] ehci_hcd 0000:00:1d.7: irq 50, io mem 0xf4784000
[17179572.004000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179572.004000] usb usb1: configuration #1 chosen from 1 choice
[17179572.004000] hub 1-0:1.0: USB hub found
[17179572.004000] hub 1-0:1.0: 8 ports detected
[17179572.672000] usbcore: registered new driver libusual
[17179572.680000] SCSI subsystem initialized
[17179572.680000] Initializing USB Mass Storage driver...
[17179572.680000] usbcore: registered new driver usb-storage
[17179572.680000] USB Mass Storage support registered.
[17179572.684000] Capability LSM initialized
[17179572.712000] ACPI: Fan [C31E] (off)
[17179572.712000] ACPI: Fan [C31F] (off)
[17179572.712000] ACPI: Fan [C320] (off)
[17179572.712000] ACPI: Fan [C321] (off)
[17179572.716000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179572.716000] ACPI: Processor [CPU1] (supports 8 throttling states)
[17179572.740000] ACPI: Thermal Zone [TZ0] (53 C)
[17179572.756000] ACPI: Thermal Zone [TZ1] (55 C)
[17179572.768000] ACPI: Thermal Zone [TZ2] (50 C)
[17179572.776000] ACPI: Thermal Zone [TZ3] (16 C)
[17179572.780000] ACPI: Thermal Zone [TZ4] (46 C)
[17179573.092000] libata version 1.20 loaded.
[17179573.092000] ahci 0000:00:1f.2: version 1.2
[17179573.092000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 21 (level, low) -> IRQ 58
[17179578.912000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179578.912000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[17179578.912000] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
[17179578.912000] ata1: SATA max UDMA/133 cmd 0xF88A8100 ctl 0x0 bmdma 0x0 irq 66
[17179578.912000] ata2: SATA max UDMA/133 cmd 0xF88A8180 ctl 0x0 bmdma 0x0 irq 66
[17179578.916000] ata3: SATA max UDMA/133 cmd 0xF88A8200 ctl 0x0 bmdma 0x0 irq 66
[17179578.916000] ata4: SATA max UDMA/133 cmd 0xF88A8280 ctl 0x0 bmdma 0x0 irq 66
[17179580.024000] ata1: SATA link up 1.5 Gbps (SStatus 113)
[17179580.028000] ata1: dev 0 cfg 49:2f00 82:306b 83:7c09 84:6023 85:3069 86:3c09 87:6023 88:203f
[17179580.028000] ata1: dev 0 ATA-7, max UDMA/100, 156301488 sectors: LBA48
[17179580.028000] ata1: dev 0 configured for UDMA/100
[17179580.028000] scsi0 : ahci
[17179580.396000] ata2: SATA link down (SStatus 0)
[17179580.396000] scsi1 : ahci
[17179580.764000] ata3: SATA link down (SStatus 0)
[17179580.764000] scsi2 : ahci
[17179581.132000] ata4: SATA link down (SStatus 0)
[17179581.132000] scsi3 : ahci
[17179581.132000] Vendor: ATA Model: FUJITSU MHV2080B Rev: 892C
[17179581.136000] Type: Direct-Access ANSI SCSI revision: 05
[17179581.140000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[17179581.140000] sda: Write Protect is off
[17179581.140000] sda: Mode Sense: 00 3a 00 00
[17179581.140000] SCSI device sda: drive cache: write back
[17179581.140000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[17179581.140000] sda: Write Protect is off
[17179581.140000] sda: Mode Sense: 00 3a 00 00
[17179581.140000] SCSI device sda: drive cache: write back
[17179581.140000] sda: sda1 sda2 < sda5 >
[17179581.540000] sd 0:0:0:0: Attached scsi disk sda
[17179581.772000] ICH7: IDE controller at PCI slot 0000:00:1f.1
[17179581.772000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 177
[17179581.772000] ICH7: chipset revision 1
[17179581.772000] ICH7: not 100% native mode: will probe irqs later
[17179581.772000] ide0: BM-DMA at 0x40a0-0x40a7, BIOS settings: hda:DMA, hdb:pio
[17179581.772000] Probing IDE interface ide0...
[17179582.508000] hda: UJDA775 DVD/CDRW, ATAPI CD/DVD-ROM drive
[17179582.848000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179582.856000] hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA
[17179582.856000] Uniform CD-ROM driver Revision: 3.20
[17179582.888000] Probing IDE interface ide1...
[17179582.904000] USB Universal Host Controller Interface driver v3.0
[17179582.904000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 50
[17179582.904000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179582.904000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179582.904000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[17179582.904000] uhci_hcd 0000:00:1d.0: irq 50, io base 0x00004020
[17179582.904000] usb usb2: configuration #1 chosen from 1 choice
[17179582.904000] hub 2-0:1.0: USB hub found
[17179582.904000] hub 2-0:1.0: 2 ports detected
[17179583.008000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 74
[17179583.008000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179583.008000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179583.008000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[17179583.008000] uhci_hcd 0000:00:1d.1: irq 74, io base 0x00004040
[17179583.012000] usb usb3: configuration #1 chosen from 1 choice
[17179583.012000] hub 3-0:1.0: USB hub found
[17179583.012000] hub 3-0:1.0: 2 ports detected
[17179583.116000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
[17179583.116000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179583.116000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179583.116000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[17179583.116000] uhci_hcd 0000:00:1d.2: irq 201, io base 0x00004060
[17179583.116000] usb usb4: configuration #1 chosen from 1 choice
[17179583.120000] hub 4-0:1.0: USB hub found
[17179583.120000] hub 4-0:1.0: 2 ports detected
[17179583.224000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 193
[17179583.224000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179583.224000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179583.224000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[17179583.224000] uhci_hcd 0000:00:1d.3: irq 193, io base 0x00004080
[17179583.224000] usb usb5: configuration #1 chosen from 1 choice
[17179583.228000] hub 5-0:1.0: USB hub found
[17179583.228000] hub 5-0:1.0: 2 ports detected
[17179583.248000] usb 2-1: new full speed USB device using uhci_hcd and address 2
[17179583.424000] usb 2-1: configuration #1 chosen from 1 choice
[17179583.476000] Attempting manual resume
[17179583.516000] kjournald starting. Commit interval 5 seconds
[17179583.516000] EXT3-fs: mounted filesystem with ordered data mode.
[17179583.668000] usb 3-1: new full speed USB device using uhci_hcd and address 2
[17179583.836000] usb 3-1: configuration #1 chosen from 1 choice
[17179584.080000] usb 4-1: new low speed USB device using uhci_hcd and address 2
[17179584.268000] usb 4-1: configuration #1 chosen from 1 choice
[17179592.780000] parport: PnPBIOS parport detected.
[17179592.780000] parport0: PC-style at 0x378 (0x778), irq 0, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179592.780000] setup_irq: irq handler mismatch
[17179592.780000] <c01487a8> setup_irq+0x128/0x140 <f895cbc0> parport_pc_interrupt+0x0/0x60 [parport_pc]
[17179592.780000] <c0148859> request_irq+0x99/0xb0 <f895c200> parport_pc_probe_port+0x610/0xee0 [parport_pc]
[17179592.780000] <f895cb80> parport_pc_pnp_probe+0xb0/0xf0 [parport_pc] <c0219eaf> pnp_device_probe+0x4f/0xb0
[17179592.780000] <c0244c14> driver_probe_device+0x44/0xc0 <c0244d92> __driver_attach+0x82/0x90
[17179592.784000] <c024457a> bus_for_each_dev+0x3a/0x60 <c0244b56> driver_attach+0x16/0x20
[17179592.784000] <c0244d10> __driver_attach+0x0/0x90 <c02441dc> bus_add_driver+0x8c/0x140
[17179592.784000] <c0244fb1> driver_register+0x41/0xa0 <f88394d2> parport_pc_init+0x372/0x38b [parport_pc]
[17179592.784000] <c013bd4a> sys_init_module+0x14a/0x19c0 <c0127330> __request_region+0x0/0x90
[17179592.784000] <c0102fd3> sysenter_past_esp+0x54/0x75
[17179592.784000] parport0: irq 0 in use, resorting to polled operation
[17179592.836000] input: PC Speaker as /class/input/input1
[17179592.912000] ieee80211_crypt: registered algorithm 'NULL'
[17179592.916000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[17179592.916000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]>
[17179592.964000] Bluetooth: Core ver 2.8
[17179592.964000] NET: Registered protocol family 31
[17179592.964000] Bluetooth: HCI device and connection manager initialized
[17179592.964000] Bluetooth: HCI socket layer initialized
[17179593.072000] Bluetooth: HCI USB driver ver 2.9
[17179593.072000] usbcore: registered new driver hci_usb
[17179593.100000] sdhci: Secure Digital Host Controller Interface driver, 0.11
[17179593.100000] sdhci: Copyright(c) Pierre Ossman
[17179593.100000] ACPI: PCI Interrupt 0000:02:06.3[C] -> GSI 22 (level, low) -> IRQ 74
[17179593.196000] mmc0: SDHCI at 0xf4202000 irq 74 PIO
[17179593.200000] Linux agpgart interface v0.101 (c) Dave Jones
[17179593.232000] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 201
[17179593.232000] Yenta: CardBus bridge found at 0000:02:06.0 [103c:30ad]
[17179593.232000] Yenta: Enabling burst memory read transactions
[17179593.232000] Yenta: Using INTVAL to route CSC interrupts to PCI
[17179593.232000] Yenta: Routing CardBus interrupts to PCI
[17179593.232000] Yenta TI: socket 0000:02:06.0, mfunc 0x01aa1b22, devctl 0x64
[17179593.292000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179593.352000] tpm_inf_pnp 00:04: Found C1FC with ID IFX0102
[17179593.352000] tpm_inf_pnp 00:04: TPM found: config base 0x560, io base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[17179593.404000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.1.0mp
[17179593.404000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[17179593.456000] irda_init()
[17179593.456000] NET: Registered protocol family 23
[17179593.468000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 201
[17179593.468000] Socket status: 30000006
[17179593.468000] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
[17179593.472000] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[17179593.472000] cs: IO port probe 0x5000-0x5fff: clean.
[17179593.472000] pcmcia: parent PCI bridge Memory window: 0xf4200000 - 0xf45fffff
[17179593.472000] pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x41ffffff
[17179593.472000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179593.472000] tg3.c:v3.59 (June 8, 2006)
[17179593.472000] ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 177
[17179593.472000] PCI: Setting latency timer of device 0000:08:00.0 to 64
[17179593.472000] usbcore: registered new driver hiddev
[17179593.516000] eth0: Tigon3 [partno(BCM95751M) rev 4201 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:16:d4:30:29:66
[17179593.516000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
[17179593.516000] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[17179593.520000] input: Microsoft Microsoft USB Wireless Mouse as /class/input/input2
[17179593.520000] input: USB HID v1.11 Mouse [Microsoft Microsoft USB Wireless Mouse] on usb-0000:00:1d.2-1
[17179593.520000] usbcore: registered new driver usbhid
[17179593.520000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179593.520000] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 185
[17179593.520000] PCI: Setting latency timer of device 0000:10:00.0 to 64
[17179593.528000] agpgart: Detected an Intel 945GM Chipset.
[17179593.528000] agpgart: Detected 7932K stolen memory.
[17179593.544000] agpgart: AGP aperture is 256M @ 0xe0000000
[17179593.544000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[17179593.576000] synaptics reset failed
[17179593.580000] synaptics reset failed
[17179593.584000] synaptics reset failed
[17179593.724000] ts: Compaq touchscreen protocol output
[17179593.752000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
[17179593.752000] serio: Synaptics pass-through port at isa0060/serio4/input0
[17179593.796000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[17179593.832000] hw_random hardware driver 1.0.0 loaded
[17179594.020000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179594.160000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 177
[17179594.160000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[17179594.360000] PM: Writing back config space on device 0000:08:00.0 at offset 1 (was 100406, writing 100006)
[17179594.440000] cs: IO port probe 0x100-0x3af: clean.
[17179594.448000] cs: IO port probe 0x3e0-0x4ff: clean.
[17179594.448000] cs: IO port probe 0x820-0x8ff: clean.
[17179594.452000] cs: IO port probe 0xc00-0xcf7: clean.
[17179594.452000] cs: IO port probe 0xa00-0xaff: clean.
[17179595.664000] NET: Registered protocol family 17
[17179596.204000] tg3: eth0: Link is up at 100 Mbps, full duplex.
[17179596.204000] tg3: eth0: Flow control is on for TX and on for RX.
[17179597.832000] Adding 1485972k swap on /dev/disk/by-uuid/7f986e62-f6c3-4676-88af-951b600fafce. Priority:-1 extents:1 across:1485972k
[17179597.900000] EXT3 FS on sda1, internal journal
[17179598.084000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179598.084000] md: bitmap version 4.39
[17179598.196000] device-mapper: 4.6.0-ioctl (2006-02-17) initialised: [email protected]
[17179598.316000] input: PS/2 Generic Mouse as /class/input/input4
[17179601.388000] pnp: Device 00:02 disabled.
[17179601.388000] pnp: Device 00:02 activated.
[17179601.424000] pnp: Device 00:02 disabled.
[17179601.424000] pnp: Device 00:02 activated.
[17179603.592000] NET: Registered protocol family 10
[17179603.592000] lo: Disabled Privacy Extensions
[17179603.592000] IPv6 over IPv4 tunneling driver
# dmidecode 2.8
SMBIOS 2.4 present.
23 structures occupying 1032 bytes.
Table at 0x000F37CD.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Hewlett-Packard
Version: 68YCU Ver. F.05
Release Date: 08/10/2006
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 1024 kB
Characteristics:
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
3.5"/720 KB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
Smart battery is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 15.5
Firmware Revision: 86.51
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Hewlett-Packard
Product Name: HP Compaq nc6400 (RA270AA#ABH)
Version: F.05
Serial Number: CND6XXXBD8
UUID: A59E1EE0-B61A-DB11-8BA4-66990C26A129
Wake-up Type: Power Switch
SKU Number: RA270AA#ABH
Family: 103C_5336AN
Handle 0x0040, DMI type 126, 11 bytes
Inactive
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Hewlett-Packard
Product Name: 30AD
Version: KBC Version 56.33
Serial Number: Not Specified
Handle 0x0003, DMI type 3, 13 bytes
Chassis Information
Manufacturer: Hewlett-Packard
Type: Notebook
Lock: Not Present
Version: Not Specified
Serial Number: CNDXXX4BD8
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: External Interface Enabled
Handle 0x0041, DMI type 126, 4 bytes
Inactive
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: U10
Type: Central Processor
Family: Pentium M
Manufacturer: Intel(R)
ID: E8 06 00 00 FF FB E9 BF
Signature: Type 0, Family 6, Model 14, Stepping 8
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Genuine Intel(R) CPU T2400 @ 1.83GHz
Voltage: 1.1 V
External Clock: 166 MHz
Max Speed: 1833 MHz
Current Speed: 1833 MHz
Status: Populated, Enabled
Upgrade: None
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 64 KB
Maximum Size: 64 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unified
Associativity: 4-way Set-associative
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal L2 Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: External
Installed Size: 2048 KB
Maximum Size: 2048 KB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: None
System Type: Unified
Associativity: 4-way Set-associative
Handle 0x0007, DMI type 9, 13 bytes
System Slot Information
Designation: PC CARD-Slot 0
Type: 32-bit PC Card (PCMCIA)
Current Usage: Available
Length: Short
ID: Adapter 0, Socket 0
Characteristics:
5.0 V is provided
3.3 V is provided
PC Card-16 is supported
Cardbus is supported
PME signal is supported
Handle 0x0008, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description: 8
Handle 0x0009, DMI type 11, 5 bytes
OEM Strings
String 1: http://www.hp.com
String 2: ABS 70/71 79 7A 7B 7C 7D
Handle 0x000A, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 4 GB
Error Information Handle: No Error
Number Of Devices: 2
Handle 0x000B, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: SODIMM
Set: None
Locator: DIMM #1
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz (1.5 ns)
Manufacturer: AD00000000000000
Serial Number: 00001034
Asset Tag: Not Specified
Part Number: HYMP564S64BP6-Y5
Handle 0x000C, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: SODIMM
Set: None
Locator: DIMM #2
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz (1.5 ns)
Manufacturer: 7F7F9E0000000000
Serial Number: 00000000
Asset Tag: Not Specified
Part Number: VS512SDS667D2
Handle 0x000D, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Array Handle: 0x000A
Partition Width: 0
Handle 0x000E, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x000B
Memory Array Mapped Address Handle: 0x000D
Partition Row Position: 1
Handle 0x000F, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00020000000
Ending Address: 0x0003FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x000C
Memory Array Mapped Address Handle: 0x000D
Partition Row Position: 2
Handle 0x0010, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x0085, DMI type 133, 34 bytes
OEM-specific Type
Header and Data:
85 22 85 00 01 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00
00 00
Strings:
No battery
Handle 0x0086, DMI type 126, 34 bytes
Inactive
Handle 0x0011, DMI type 144, 26 bytes
OEM-specific Type
Header and Data:
90 1A 11 00 16 00 1E 00 9D 00 33 00 06 00 80 00
00 00 02 00 02 00 C7 00 00 00
Handle 0x0012, DMI type 127, 4 bytes
End Of Table
Ben B wrote:
> Hi,
>
> My HP notebook decided that its BIOS upgrade would break
> speedstep-centrino, and trying to load the module gives me a "no such
> device" error. This is with various combinations of kernel config
> relating to cpufreq. Also tried acpi-cpufreq with the same error.
>
> I suspect that the new bios is broken, but perhaps it's correct and the
> linux driver is missing something?
Did this part below show up with the previous BIOS?
> [17179571.248000] ACPI: Subsystem revision 20060127
> [17179571.248000] ACPI Error (evgpeblk-0284): Unknown GPE method type: C341 (name not of form _Lxx or _Exx) [20060127]
> [17179571.248000] ACPI Error (evgpeblk-0284): Unknown GPE method type: C23A (name not of form _Lxx or _Exx) [20060127]
> [17179571.248000] ACPI Error (evgpeblk-0284): Unknown GPE method type: C342 (name not of form _Lxx or _Exx) [20060127]
> [17179571.248000] ACPI Error (evgpeblk-0284): Unknown GPE method type: C343 (name not of form _Lxx or _Exx) [20060127]
> [17179571.248000] ACPI Error (evgpeblk-0284): Unknown GPE method type: C26F (name not of form _Lxx or _Exx) [20060127]
--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from [email protected]
Home Page: http://www.roberthancock.com/
Ben B wrote:
> Hi,
>
> My HP notebook decided that its BIOS upgrade would break
> speedstep-centrino, and trying to load the module gives me a "no such
> device" error. This is with various combinations of kernel config
> relating to cpufreq. Also tried acpi-cpufreq with the same error.
>
> I suspect that the new bios is broken, but perhaps it's correct and the
> linux driver is missing something?
>
> Anyway, relevent info below.
>
> Cheers,
> Ben
>
I have the same problem, running kernel 2.6.17.13, and also get the 'No
such device' error.
This problem doesn't occur when i boot 2.6.16.16, so the behaviour must
have been introduced
somewhere in between.
Does it have anything to do with this thread?
http://lkml.org/lkml/2004/8/6/12
Regards, Michiel de Boer
Here's my relevant info:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 1.80GHz
stepping : 6
cpu MHz : 1794.431
cache size : 2048 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr mce cx8 sep mtrr pge mca cmov
pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe up est tm2
bogomips : 3591.62
dmesg:
<cut off>nterrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 6 (level, low)
-> IRQ 6
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: TOSHIBA MK1032GAX, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: MATSHITADVD-RAM UJ-831S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 195371568 sectors (100030 MB), CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
libata version 1.20 loaded.
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 4760.000 MB/sec
raid5: using function: pIII_sse (4760.000 MB/sec)
raid6: int32x1 592 MB/s
raid6: int32x2 693 MB/s
raid6: int32x4 524 MB/s
raid6: int32x8 471 MB/s
raid6: mmxx1 1639 MB/s
raid6: mmxx2 2051 MB/s
raid6: sse1x1 1298 MB/s
raid6: sse1x2 2138 MB/s
raid6: sse2x1 2207 MB/s
raid6: sse2x2 2626 MB/s
raid6: using algorithm sse2x2 (2626 MB/s)
md: raid6 personality registered for level 6
md: multipath personality registered for level -4
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: [email protected]
device-mapper: dm-multipath version 1.0.4 loaded
device-mapper: dm-round-robin version 1.0.0 loaded
device-mapper: dm-emc version 0.0.3 loaded
EDAC MC: Ver: 2.0.0 Sep 9 2006
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
EISA: Detected 0 cards.
NET: Registered protocol family 1
Using IPI No-Shortcut mode
Suspend2 Core.
Suspend2 Compression Driver loading.
Suspend2 Encryption Driver loading.
Suspend2 Swap Writer loading.
Suspend2 FileWriter loading.
Replacing swsusp.
Suspend2 2.2.7.5: You need to use a resume2= command line parameter to
tell Suspend2 where to look for an image.
Suspend2 2.2.7.5: Resume2 parameter is empty. Suspending will be disabled.
Suspend2 2.2.7.5: Missing or invalid storage location (resume2=
parameter). Please correct and rerun lilo (or equivalent) before suspending.
ACPI wakeup devices:
GLAN MPCI T394 MDM0 USB1 USB2 USB3
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 308k freed
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
input: AT Translated Set 2 keyboard as /class/input/input0
ReiserFS: hda2: using ordered data mode
ReiserFS: hda2: journal params: device hda2, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: Using r5 hash to sort names
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.7
ieee80211: Copyright (C) 2004-2005 Intel Corporation
<[email protected]>
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
tg3.c:v3.59.1 (August 25, 2006)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 6
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKD] -> GSI 6 (level, low)
-> IRQ 6
eth0: Tigon3 [partno(BCM95705A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit)
10/100/1000BaseT Ethernet 00:c0:9f:6f:3a:fe
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0]
TSOcap[1]
eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
NET: Registered protocol family 23
ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 6 (level, low)
-> IRQ 6
Yenta: CardBus bridge found at 0000:02:06.0 [1025:0051]
Yenta O2: res at 0x94/0xD4: ea/00
Yenta O2: enabling read prefetch/write burst
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
Linux agpgart interface v0.101 (c) Dave Jones
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.1.1
ipw2200: Copyright(c) 2003-2006 Intel Corporation
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Yenta: ISA IRQ mask 0x0c38, PCI irq 6
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd07fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x35ffffff
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKE] -> GSI 10 (level,
low) -> IRQ 10
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
USB Universal Host Controller Interface driver v3.0
Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9d48b1, caps: 0x904713/0x4006
input: SynPS/2 Synaptics TouchPad as /class/input/input1
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x04e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
nsc-ircc, Found chip at base=0x04e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x2f8
ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 6
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 6 (level, low)
-> IRQ 6
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 6, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
pnp: Device 00:0a disabled.
ACPI: PCI Interrupt 0000:02:06.1[A] -> Link [LNKC] -> GSI 6 (level, low)
-> IRQ 6
Yenta: CardBus bridge found at 0000:02:06.1 [1025:0051]
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 6 (level, low)
-> IRQ 6
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 6, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Yenta: ISA IRQ mask 0x0838, PCI irq 6
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd07fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x35ffffff
ACPI: PCI Interrupt 0000:02:06.3[A] -> Link [LNKC] -> GSI 6 (level, low)
-> IRQ 6
Yenta: CardBus bridge found at 0000:02:06.3 [1025:0051]
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 6 (level, low)
-> IRQ 6
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 6, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ieee1394: Initialized config rom entry `ip1394'
ts: Compaq touchscreen protocol output
Yenta: ISA IRQ mask 0x0838, PCI irq 6
Socket status: 30000410
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
cs: IO port probe 0x4000-0x4fff: clean.
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd07fffff
usb 2-1: new low speed USB device using uhci_hcd and address 2
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x35ffffff
agpgart: Detected an Intel 855GM Chipset.
agpgart: AGP aperture is 256M @ 0xe0000000
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level,
low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 10, io mem 0xd0000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 2-1: device descriptor read/all, error -71
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level,
low) -> IRQ 10
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level,
low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.5 to 64
pccard: PCMCIA card inserted into slot 2
usb 4-6: new high speed USB device using ehci_hcd and address 3
cs: memory probe 0xd0200000-0xd07fffff: excluding 0xd0200000-0xd025ffff
pcmcia: registering new device pcmcia2.0
usb 4-6: configuration #1 chosen from 1 choice
hub 4-6:1.0: USB hub found
hub 4-6:1.0: 4 ports detected
cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0xa00-0xaff: clean.
intel8x0_measure_ac97_clock: measured 104808 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKB] -> GSI 10 (level,
low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]
MMIO=[d0218000-d02187ff] Max Packet=[2048] IR/IT contexts=[4/8]
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level,
low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.6 to 64
hw_random: RNG not detected
usb 2-1: new low speed USB device using uhci_hcd and address 4
usb 2-1: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: Logitech Optical USB Mouse as /class/input/input2
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on
usb-0000:00:1d.1-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Adding 497972k swap on /dev/hda5. Priority:-1 extents:1 across:497972k
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f000034bb39]
eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
Capability LSM initialized
fuse init (API version 7.6)
input: PC Speaker as /class/input/input3
NTFS driver 2.1.27 [Flags: R/W MODULE].
NTFS volume version 3.1.
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
PM: Writing back config space on device 0000:02:02.0 at offset c (was
ffef0000, writing 0)
PM: Writing back config space on device 0000:02:02.0 at offset b (was
165d14e4, writing 511025)
PM: Writing back config space on device 0000:02:02.0 at offset 3 (was 0,
writing 4008)
PM: Writing back config space on device 0000:02:02.0 at offset 2 (was
2000000, writing 2000003)
PM: Writing back config space on device 0000:02:02.0 at offset 1 (was
2b00000, writing 2b00106)
PM: Writing back config space on device 0000:02:02.0 at offset 0 (was
165d14e4, writing 165314e4)
NET: Registered protocol family 17
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Battery Slot [BAT2] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Thermal Zone [THRM] (51 C)
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
lp0: using parport0 (interrupt-driven).
lp0: console ready
ppdev: user-space parallel port driver
ttyS1: LSR safety check engaged!
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 6 (level, low)
-> IRQ 6
[drm] Initialized radeon 1.24.0 20060225 on minor 0
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] writeback test succeeded in 1 usecs
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.7
.
# dmidecode 2.8
SMBIOS 2.31 present.
27 structures occupying 1207 bytes.
Table at 0x000DF810.
Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: ACER
Version: 3A20
Release Date: 01/31/2005
Address: 0xE5240
Runtime Size: 110016 bytes
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
3.5"/720 KB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
AGP is supported
Smart battery is supported
BIOS boot specification is supported
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer: Acer
Product Name: TravelMate 8000
Version: Rev 1
Serial Number: xxxxxxxxxxxxx
UUID: xxxxxxxxxxxxxx
Wake-up Type: Power Switch
Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Acer
Product Name: TravelMate 8000
Version: Rev 1.0
Serial Number: xxxxxxxxxxxxx
Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: Acer
Type: Notebook
Lock: Not Present
Version: Rev.1
Serial Number: xxxxxxxxxxxxxx
Asset Tag: ................................
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00001234
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: uFCPGA2
Type: Central Processor
Family: Unknown
Manufacturer: Intel
ID: D6 06 00 00 BF F9 E9 AF
Version: Intel(R) Pentium(R) M processor
Voltage: 1.2 V
External Clock: 400 MHz
Max Speed: 1800 MHz
Current Speed: 1800 MHz
Status: Populated, Enabled
Upgrade: ZIF Socket
L1 Cache Handle: 0x0008
L2 Cache Handle: 0x0009
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0005, DMI type 5, 20 bytes
Memory Controller Information
Error Detecting Method: None
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 1024 MB
Maximum Total Memory Size: 2048 MB
Supported Speeds:
60 ns
Supported Memory Types:
DIMM
Memory Module Voltage: 3.3 V
Associated Memory Slots: 2
0x0006
0x0007
Enabled Error Correcting Capabilities:
None
Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM 1
Bank Connections: 0 1
Current Speed: 75 ns
Type: DIMM SDRAM
Installed Size: Not Installed
Enabled Size: Not Installed
Error Status: OK
Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM 2
Bank Connections: 2 3
Current Speed: 75 ns
Type: DIMM SDRAM
Installed Size: 512 MB (Double-bank Connection)
Enabled Size: 512 MB (Double-bank Connection)
Error Status: OK
Handle 0x0008, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 KB
Maximum Size: 32 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Asynchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0009, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: External
Installed Size: 2048 KB
Maximum Size: 2048 KB
Supported SRAM Types:
Burst
Pipeline Burst
Asynchronous
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LPT 1
Internal Connector Type: None
External Reference Designator: Parallel
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: U28
Internal Connector Type: None
External Reference Designator: PS/2 Mouse
External Connector Type: Circular DIN-8 male
Port Type: Keyboard Port
Handle 0x000C, DMI type 9, 13 bytes
System Slot Information
Designation: PCMCIA socket 0
Type: 32-bit PC Card (PCMCIA)
Current Usage: Unknown
Length: Long
ID: Adapter 0, Socket 0
Characteristics:
5.0 V is provided
3.3 V is provided
PC Card-16 is supported
Cardbus is supported
Modem ring resume is supported
PME signal is supported
Hot-plug devices are supported
Handle 0x000D, DMI type 10, 10 bytes
On Board Device 1 Information
Type: Video
Status: Disabled
Description: ATI M11
On Board Device 2 Information
Type: Sound
Status: Disabled
Description: AC97 Audio
On Board Device 3 Information
Type: Other
Status: Disabled
Description: TI TSB43AB21 IEEE-1394 Controller
Handle 0x000E, DMI type 11, 5 bytes
OEM Strings
String 1: SMBIOS 2.3
String 2: Customer Reference Platform
Handle 0x000F, DMI type 12, 5 bytes
System Configuration Options
Option 1: No Jumper On This Platform.
Handle 0x0010, DMI type 15, 29 bytes
System Event Log
Area Length: 0 bytes
Header Start Offset: 0x0000
Header Length: 16 bytes
Data Start Offset: 0x0010
Access Method: Memory-mapped physical 32-bit address
Access Address: 0x00000000
Status: Invalid, Not Full
Change Token: 0x00000000
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: Single-bit ECC memory error
Data Format 2: Multiple-event
Descriptor 3: Multi-bit ECC memory error
Data Format 3: Multiple-event
Handle 0x0011, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 3 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x0012, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0011
Error Information Handle: No Error
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: 1
Locator: DIMM 0
Bank Locator: Bank 0, 1
Type: SRAM
Type Detail: Synchronous
Speed: 333 MHz (3.0 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0013, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0011
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: 1
Locator: DIMM 1
Bank Locator: Bank 2, 3
Type: SRAM
Type Detail: Synchronous
Speed: 333 MHz (3.0 ns)
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Handle 0x0014, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Array Handle: 0x0011
Partition Width: 0
Handle 0x0015, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000000003FF
Range Size: 1 kB
Physical Device Handle: 0x0012
Memory Array Mapped Address Handle: 0x0014
Partition Row Position: 1
Interleave Position: 1
Handle 0x0016, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x0013
Memory Array Mapped Address Handle: 0x0014
Partition Row Position: 1
Interleave Position: 1
Handle 0x0017, DMI type 21, 7 bytes
Built-in Pointing Device
Type: Mouse
Interface: PS/2
Buttons: 2
Handle 0x0018, DMI type 22, 26 bytes
Portable Battery
Location: Right Side
Manufacturer: Sanyo
Name: Sanyo
Chemistry: Lithium Ion
Design Capacity: 4400 mWh
Design Voltage: 14800 mV
SBDS Version: Bat123
Maximum Error: 100%
SBDS Serial Number: 04D2
SBDS Manufacture Date: 1985-08-25
OEM-specific Information: 0x00000000
Handle 0x0019, DMI type 32, 20 bytes
System Boot Information
Status: <OUT OF SPEC>
Handle 0x001A, DMI type 127, 4 bytes
End Of Table
>-----Original Message-----
>From: [email protected]
>[mailto:[email protected]] On Behalf Of Ben B
>Sent: Tuesday, September 12, 2006 12:38 PM
>To: [email protected]; [email protected]
>Subject: speedstep-centrino broke
>
>Hi,
>
>My HP notebook decided that its BIOS upgrade would break
>speedstep-centrino, and trying to load the module gives me a "no such
>device" error. This is with various combinations of kernel config
>relating to cpufreq. Also tried acpi-cpufreq with the same error.
>
>I suspect that the new bios is broken, but perhaps it's correct and the
>linux driver is missing something?
>
>Anyway, relevent info below.
>
Probably BIOS broke something during the update. Can you send me the
acpidump output from your system (acpidump is avlbl in latest pmtools
here - http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/ )
It will be great if you can open a bugzilla entry at bugme.osdl.org
under ACPI power-processor and attach all this info. there. It will help
to keep track of the bug information in a better way.
Thanks,
Venki
>-----Original Message-----
>From: [email protected]
>[mailto:[email protected]] On Behalf Of
>Michiel de Boer
>Sent: Wednesday, September 13, 2006 12:28 AM
>To: Ben B
>Cc: [email protected]; [email protected]
>Subject: Re: speedstep-centrino broke
>
>Ben B wrote:
>> Hi,
>>
>> My HP notebook decided that its BIOS upgrade would break
>> speedstep-centrino, and trying to load the module gives me a "no such
>> device" error. This is with various combinations of kernel config
>> relating to cpufreq. Also tried acpi-cpufreq with the same error.
>>
>> I suspect that the new bios is broken, but perhaps it's
>correct and the
>> linux driver is missing something?
>>
>> Anyway, relevent info below.
>>
>> Cheers,
>> Ben
>>
>
>I have the same problem, running kernel 2.6.17.13, and also
>get the 'No
>such device' error.
>This problem doesn't occur when i boot 2.6.16.16, so the
>behaviour must
>have been introduced
>somewhere in between.
>
Just to confirm. Moving from 2.6.16.16 to 2.6.17.13 with no other change
to system (BIOS change) breaks the driver? Did you also try acpi-cpufreq
driver with 2.6.17.13?
Thanks,
Venki
>
> I have the same problem, running kernel 2.6.17.13, and also get the 'No
> such device' error.
> This problem doesn't occur when i boot 2.6.16.16, so the behaviour must
> have been introduced
> somewhere in between.
>
> Does it have anything to do with this thread?
> http://lkml.org/lkml/2004/8/6/12
Not likely for mine - mine is a core duo - which is a dual core, and not
(to my knowledge) a Banias or Dothan chip. I get the problem with all
kernels I've tried (2.6.17.13, 2.6.18-rc4 as well as Ubuntu stock).
With the earlier BIOS, all kernels I tried happily had working cpufreq.
Ben
Hi,
I experience the same speedstep problem on my HP nc6320 (CoreDuo T2400)
since yesterday's BIOS update (F06 to F08).
According to the release notes this BIOS update should introduce support
for the new CPU's (Core2 "Merom" I suppose).
I did verify both kernels 2.6.16 and 2.6.17 (both vanilla), there is
_no_ difference, both have the same speedstep problem.
I did look through the 2.6.17 logs, before and after the bios update and
diff showed the following differences:
The BIOS v F06 (speedstep was OK):
kernel: ACPI: RSDP (v000 HP ) @
0x000f7d70
kernel: ACPI: RSDT (v001 HP 30AA 0x28040620 HP 0x00000001) @
0x3f7e5684
kernel: ACPI: FADT (v002 HP 30AA 0x00000002 HP 0x00000001) @
0x3f7e5600
kernel: ACPI: MADT (v001 HP 30AA 0x00000001 HP 0x00000001) @
0x3f7e56c0
kernel: ACPI: MCFG (v001 HP 30AA 0x00000001 HP 0x00000001) @
0x3f7e5728
kernel: ACPI: TCPA (v002 HP 30AA 0x00000001 HP 0x00000001) @
0x3f7e5764
kernel: ACPI: SSDT (v001 HP HPQSAT 0x00000001 MSFT 0x0100000e) @
0x3f7f4af8
kernel: ACPI: SSDT (v001 HP CpuPm 0x00003000 INTL 0x20050624) @
0x3f7f52e5
kernel: ACPI: DSDT (v001 HP nc6340 0x00010000 MSFT 0x0100000e) @
0x00000000
The BIOS v F08 (no speedstep anymore):
kernel: ACPI: RSDP (v002 HP ) @
0x000f7f00
kernel: ACPI: XSDT (v001 HP 30AA 0x27070620 HP 0x00000001) @
0x3f7e57b4
kernel: ACPI: FADT (v004 HP 30AA 0x00000003 HP 0x00000001) @
0x3f7e5684
kernel: ACPI: MADT (v001 HP 30AA 0x00000001 HP 0x00000001) @
0x3f7e5808
kernel: ACPI: MCFG (v001 HP 30AA 0x00000001 HP 0x00000001) @
0x3f7e5870
kernel: ACPI: TCPA (v002 HP 30AA 0x00000001 HP 0x00000001) @
0x3f7e58ac
kernel: ACPI: SSDT (v001 HP HPQSAT 0x00000001 MSFT 0x0100000e) @
0x3f7f4e9c
kernel: ACPI: DSDT (v001 HP nc6340 0x00010000 MSFT 0x0100000e) @
0x00000000
So, i suppose it has something to do with a CpuPm SSDT section which is
now missing (or maybe present in a different form?).
As a consequence, with BIOS v. F06 i get the following messages:
kernel: ACPI: CPU0 (power states: C1[C1] C2[C2])
kernel: ACPI: Processor [CPU0] (supports 8 throttling states)
kernel: ACPI: CPU1 (power states: C1[C1] C2[C2])
kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
and with BIOS v. F08 just this:
kernel: ACPI: Processor [CPU0] (supports 8 throttling states)
kernel: ACPI: Processor [CPU1] (supports 8 throttling states)
If any further info would help, I have the full ACPI dump from the BIOS
F04 (which was OK and had that CpuPm SSDT table too) and could create the
dump for the BIOS v F08 (which broke the speedstep).
But as it looks, I suspect it is an HP issue and probably has nothing to
do with linux kernel.
Regards,
Almonas
Almonas Petrasevicius <[email protected]> uttered the following thing:
> Hi,
>
> I experience the same speedstep problem on my HP nc6320 (CoreDuo T2400)
> since yesterday's BIOS update (F06 to F08).
>
> According to the release notes this BIOS update should introduce support
> for the new CPU's (Core2 "Merom" I suppose).
>
> I did verify both kernels 2.6.16 and 2.6.17 (both vanilla), there is
> _no_ difference, both have the same speedstep problem.
At the suggestion of Venki, I opened a bugzilla ticket on it:
http://bugzilla.kernel.org/show_bug.cgi?id=7157
And the lowdown is that it seems the newer BIOS no longer exports the
correct ACPI symbols which are required for speedstep, thus no longer
supporting it (at least via the official methods). Hence it seems not a
Linux kernel bug.
I opened a support ticket with HP, hopefully they address the issue. In
the meantime I rolled back my bios and have cpufreq working again.
Interesting that you also see the problem on an nc6320, it could be that
they use the same BIOS codebase for various models.
Ben
On Thu, 14 Sep 2006, Ben B wrote:
>> I did verify both kernels 2.6.16 and 2.6.17 (both vanilla), there is
>> _no_ difference, both have the same speedstep problem.
>
> At the suggestion of Venki, I opened a bugzilla ticket on it:
>
> http://bugzilla.kernel.org/show_bug.cgi?id=7157
>
> And the lowdown is that it seems the newer BIOS no longer exports the
> correct ACPI symbols which are required for speedstep, thus no longer
> supporting it (at least via the official methods). Hence it seems not a
> Linux kernel bug.
Could be. But I am still somehow puzzled, since neither of the
previous versions (F04 & F06 in my case) contain any reference to the
mentioned methods (_PSS & _PCT). But those versions were speedsteping just
fine.
Or maybe I don't know how to look.
Could You dump your "working" ACPI table and look for those two methods?
Regretfully I don't know much about the ACPI and ASL. It seems like a
perfect occasion to get myself familiar with it.
> I opened a support ticket with HP, hopefully they address the issue. In
I am not holding my breath unless You know some magic word :)
Btw, that another OS is speedsteping just fine (or pretends doing so).
> the meantime I rolled back my bios and have cpufreq working again.
> Interesting that you also see the problem on an nc6320, it could be that
> they use the same BIOS codebase for various models.
But of course. I suspect, that aside from the physical layout it is
basically the same hardware.
Regards,
Almonas
>-----Original Message-----
>From: Almonas Petrasevicius [mailto:[email protected]]
>Sent: Thursday, September 14, 2006 12:43 PM
>To: Ben B
>Cc: [email protected]; Pallipadi, Venkatesh;
>[email protected]
>Subject: Re: speedstep-centrino broke
>
>
>On Thu, 14 Sep 2006, Ben B wrote:
>
>>> I did verify both kernels 2.6.16 and 2.6.17 (both vanilla), there is
>>> _no_ difference, both have the same speedstep problem.
>>
>> At the suggestion of Venki, I opened a bugzilla ticket on it:
>>
>> http://bugzilla.kernel.org/show_bug.cgi?id=7157
>>
>> And the lowdown is that it seems the newer BIOS no longer exports the
>> correct ACPI symbols which are required for speedstep, thus no longer
>> supporting it (at least via the official methods). Hence it
>seems not a
>> Linux kernel bug.
>
>Could be. But I am still somehow puzzled, since neither of the
>previous versions (F04 & F06 in my case) contain any reference to the
>mentioned methods (_PSS & _PCT). But those versions were
>speedsteping just
>fine.
>Or maybe I don't know how to look.
>Could You dump your "working" ACPI table and look for those
>two methods?
As you mentioned in your earlier mail, CpuPm object is missing after
BIOS update. That table, most probably, will contain these ACPI _PSS etc
methods internally.
Thanks,
Venki
On Thu, 2006-09-14 at 12:43 -0700, Pallipadi, Venkatesh wrote:
> >Or maybe I don't know how to look.
> >Could You dump your "working" ACPI table and look for those
> >two methods?
>
> As you mentioned in your earlier mail, CpuPm object is missing after
> BIOS update. That table, most probably, will contain these ACPI _PSS etc
> methods internally.
That's my problem: I can't find them there. At least not directly.
It contains just two methods for each CPU: _PDC and _OSC.
Althrough the _OSC methods contain some logic and Load(...) calls, and
there is a package supiciously looking like a directory containing
some additional ACPI tables (for example "CPU0IST ", offset, length and so
on). So, it's possible, that required tables are loaded "on demand" but
not accesible with the acpidump.
Regards,
Almonas
>-----Original Message-----
>From: Almonas Petrasevicius [mailto:[email protected]]
>Sent: Thursday, September 14, 2006 1:14 PM
>To: [email protected]; Pallipadi, Venkatesh
>Cc: [email protected]; Ben B; [email protected]
>Subject: Re: speedstep-centrino broke
>
>
>On Thu, 2006-09-14 at 12:43 -0700, Pallipadi, Venkatesh wrote:
>
>> >Or maybe I don't know how to look.
>> >Could You dump your "working" ACPI table and look for those
>> >two methods?
>>
>> As you mentioned in your earlier mail, CpuPm object is missing after
>> BIOS update. That table, most probably, will contain these
>ACPI _PSS etc
>> methods internally.
>
>That's my problem: I can't find them there. At least not directly.
>It contains just two methods for each CPU: _PDC and _OSC.
>Althrough the _OSC methods contain some logic and Load(...) calls, and
>there is a package supiciously looking like a directory containing
>some additional ACPI tables (for example "CPU0IST ", offset,
>length and so
>on). So, it's possible, that required tables are loaded "on
>demand" but
>not accesible with the acpidump.
>
Yes. Dynamic loading is possible. Atleast there should be _PDC/_OSC
which in turn calls the other loads.
Thanks,
Venki