Hello,
the build with the attached .config failed, make ends with:
...
synclink.c:(.text+0x6510d): undefined reference to `hdlc_open'
drivers/built-in.o: In function `hdlcdev_close':
synclink.c:(.text+0x65251): undefined reference to `hdlc_close'
drivers/built-in.o: In function `hdlcdev_ioctl':
synclink.c:(.text+0x652ee): undefined reference to `hdlc_ioctl'
drivers/built-in.o: In function `hdlcdev_init':
synclink.c:(.text+0x65756): undefined reference to `alloc_hdlcdev'
drivers/built-in.o: In function `hdlcdev_exit':
synclink.c:(.text+0x65864): undefined reference to `unregister_hdlc_device'
drivers/built-in.o: In function `hdlcdev_open':
synclinkmp.c:(.text+0x67875): undefined reference to `hdlc_open'
synclinkmp.c:(.text+0x678ad): undefined reference to `hdlc_open'
drivers/built-in.o: In function `hdlcdev_close':
synclinkmp.c:(.text+0x679f1): undefined reference to `hdlc_close'
drivers/built-in.o: In function `hdlcdev_ioctl':
synclinkmp.c:(.text+0x67a8e): undefined reference to `hdlc_ioctl'
drivers/built-in.o: In function `hdlcdev_init':
synclinkmp.c:(.text+0x67ef6): undefined reference to `alloc_hdlcdev'
drivers/built-in.o: In function `hdlcdev_exit':
synclinkmp.c:(.text+0x68004): undefined reference to `unregister_hdlc_device'
drivers/built-in.o: In function `hdlcdev_open':
synclink_cs.c:(.text+0x7acb5): undefined reference to `hdlc_open'
synclink_cs.c:(.text+0x7aced): undefined reference to `hdlc_open'
drivers/built-in.o: In function `hdlcdev_close':
synclink_cs.c:(.text+0x7ae31): undefined reference to `hdlc_close'
drivers/built-in.o: In function `hdlcdev_ioctl':
synclink_cs.c:(.text+0x7aece): undefined reference to `hdlc_ioctl'
drivers/built-in.o: In function `hdlcdev_init':
synclink_cs.c:(.text+0x7b336): undefined reference to `alloc_hdlcdev'
drivers/built-in.o: In function `hdlcdev_exit':
synclink_cs.c:(.text+0x7b434): undefined reference to `unregister_hdlc_device'
make: *** [.tmp_vmlinux1] Error 1
Here's the config:
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.19-rc5
# Sun Nov 12 19:16:39 2006
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_IPC_NS=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_TASK_XACCT=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_LSF is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=m
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUMM=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_EFI is not set
# CONFIG_REGPARM is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_KEXEC=y
CONFIG_PHYSICAL_START=0x100000
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
CONFIG_PM_DEBUG=y
CONFIG_DISABLE_CONSOLE_SUSPEND=y
# CONFIG_PM_SYSFS_DEPRECATED is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=m
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_IOCTL is not set
# CONFIG_CARDBUS is not set
#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
#
# PCI Hotplug Support
#
#
# Executable file formats
#
# CONFIG_BINFMT_ELF is not set
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=y
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_IPCOMP is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=m
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_IPV6_SIT is not set
CONFIG_IPV6_TUNNEL=m
CONFIG_NETLABEL=y
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=y
#
# IrDA protocols
#
CONFIG_IRLAN=y
# CONFIG_IRNET is not set
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
# CONFIG_LITELINK_DONGLE is not set
#
# Old SIR device drivers
#
# CONFIG_IRPORT_SIR is not set
#
# Old Serial dongle support
#
#
# FIR device drivers
#
CONFIG_NSC_FIR=y
# CONFIG_WINBOND_FIR is not set
CONFIG_TOSHIBA_FIR=y
# CONFIG_VIA_FIR is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=y
CONFIG_BT_RFCOMM_TTY=y
# CONFIG_BT_BNEP is not set
CONFIG_BT_CMTP=m
# CONFIG_BT_HIDP is not set
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIDTL1=y
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=y
# CONFIG_BT_HCIBTUART is not set
CONFIG_BT_HCIVHCI=m
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m
#
# Parallel IDE high-level drivers
#
# CONFIG_PARIDE_PD is not set
# CONFIG_PARIDE_PCD is not set
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
# CONFIG_PARIDE_BPCK6 is not set
# CONFIG_PARIDE_COMM is not set
CONFIG_PARIDE_DSTR=m
# CONFIG_PARIDE_FIT2 is not set
CONFIG_PARIDE_FIT3=m
# CONFIG_PARIDE_EPAT is not set
# CONFIG_PARIDE_EPIA is not set
# CONFIG_PARIDE_FRIQ is not set
CONFIG_PARIDE_FRPW=m
# CONFIG_PARIDE_KBIC is not set
CONFIG_PARIDE_KTTI=m
# CONFIG_PARIDE_ON20 is not set
# CONFIG_PARIDE_ON26 is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
#
# Misc devices
#
CONFIG_SGI_IOC4=y
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_NETLINK is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
CONFIG_IEEE1394_VERBOSEDEBUG=y
# CONFIG_IEEE1394_OUI_DB is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set
CONFIG_IEEE1394_EXPORT_FULL_API=y
#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
# CONFIG_IEEE1394_OHCI1394 is not set
#
# Protocol Drivers
#
#
# SBP-2 support (for storage devices) requires SCSI
#
CONFIG_IEEE1394_RAWIO=m
#
# I2O device support
#
CONFIG_I2O=y
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=y
# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_PROC=y
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_EQUALIZER=y
CONFIG_TUN=y
#
# ARCnet devices
#
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
# CONFIG_ARCNET_1051 is not set
# CONFIG_ARCNET_RAW is not set
# CONFIG_ARCNET_CAP is not set
CONFIG_ARCNET_COM90xx=m
# CONFIG_ARCNET_COM90xxIO is not set
CONFIG_ARCNET_RIM_I=m
# CONFIG_ARCNET_COM20020 is not set
#
# PHY device support
#
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=m
#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=y
CONFIG_ACENIC_OMIT_TIGON_I=y
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
CONFIG_E1000_DISABLE_PACKET_SPLIT=y
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_R8169=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=m
CONFIG_SK98LIN=m
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
CONFIG_IXGB=y
CONFIG_S2IO=m
# CONFIG_MYRI10GE is not set
#
# Token Ring devices
#
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_IBMLS is not set
CONFIG_3C359=m
# CONFIG_TMS380TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=y
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=y
CONFIG_PCMCIA_IBMTR=m
#
# Wan interfaces
#
CONFIG_WAN=y
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
# CONFIG_HDLC_RAW is not set
CONFIG_HDLC_RAW_ETH=m
# CONFIG_HDLC_CISCO is not set
CONFIG_HDLC_FR=m
# CONFIG_HDLC_PPP is not set
#
# X.25/LAPB support is disabled
#
# CONFIG_PCI200SYN is not set
# CONFIG_WANXL is not set
CONFIG_PC300=m
#
# Cyclades-PC300 MLPPP support is disabled.
#
#
# Refer to the file README.mlppp, provided by PC300 package.
#
CONFIG_FARSYNC=m
# CONFIG_DLCI is not set
CONFIG_SBNI=y
# CONFIG_SBNI_MULTILINE is not set
# CONFIG_FDDI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
CONFIG_PPP_FILTER=y
# CONFIG_PPP_ASYNC is not set
CONFIG_PPP_SYNC_TTY=m
# CONFIG_PPP_DEFLATE is not set
CONFIG_PPP_BSDCOMP=y
# CONFIG_SLIP is not set
CONFIG_SLHC=y
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
CONFIG_ISDN=y
#
# Old ISDN4Linux
#
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
# CONFIG_ISDN_PPP_VJ is not set
# CONFIG_ISDN_MPP is not set
# CONFIG_IPPP_FILTER is not set
# CONFIG_ISDN_PPP_BSDCOMP is not set
# CONFIG_ISDN_AUDIO is not set
#
# ISDN feature submodules
#
# CONFIG_ISDN_DRV_LOOP is not set
# CONFIG_ISDN_DIVERSION is not set
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
# CONFIG_HISAX_EURO is not set
# CONFIG_HISAX_1TR6 is not set
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
# CONFIG_HISAX_16_3 is not set
CONFIG_HISAX_TELESPCI=y
# CONFIG_HISAX_S0BOX is not set
CONFIG_HISAX_FRITZPCI=y
# CONFIG_HISAX_AVM_A1_PCMCIA is not set
# CONFIG_HISAX_ELSA is not set
CONFIG_HISAX_DIEHLDIVA=y
# CONFIG_HISAX_SEDLBAUER is not set
# CONFIG_HISAX_NETJET is not set
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
# CONFIG_HISAX_SCT_QUADRO is not set
# CONFIG_HISAX_GAZEL is not set
# CONFIG_HISAX_HFC_PCI is not set
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
CONFIG_HISAX_DEBUG=y
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_AVM_A1_CS=m
#
# HiSax sub driver modules
#
#
# Active cards
#
# CONFIG_HYSDN is not set
#
# Siemens Gigaset
#
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_DEBUG=y
CONFIG_GIGASET_UNDOCREQ=y
#
# CAPI subsystem
#
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
#
# Active AVM cards
#
# CONFIG_CAPI_AVM is not set
#
# Active Eicon DIVA Server cards
#
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=y
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
# CONFIG_ISDN_DIVAS_DIVACAPI is not set
CONFIG_ISDN_DIVAS_USERIDI=y
CONFIG_ISDN_DIVAS_MAINT=m
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=m
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=y
CONFIG_JOYSTICK_ADI=y
CONFIG_JOYSTICK_COBRA=y
CONFIG_JOYSTICK_GF2K=m
# CONFIG_JOYSTICK_GRIP is not set
CONFIG_JOYSTICK_GRIP_MP=y
CONFIG_JOYSTICK_GUILLEMOT=m
# CONFIG_JOYSTICK_INTERACT is not set
CONFIG_JOYSTICK_SIDEWINDER=y
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
CONFIG_JOYSTICK_WARRIOR=y
CONFIG_JOYSTICK_MAGELLAN=y
# CONFIG_JOYSTICK_SPACEORB is not set
CONFIG_JOYSTICK_SPACEBALL=y
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_ELO=y
# CONFIG_TOUCHSCREEN_MTOUCH is not set
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
CONFIG_INPUT_WISTRON_BTNS=y
CONFIG_INPUT_UINPUT=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_CT82C710=m
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
CONFIG_GAMEPORT_L4=m
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=y
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_DIGIEPCA is not set
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=y
CONFIG_ISI=y
CONFIG_SYNCLINK=y
CONFIG_SYNCLINKMP=y
# CONFIG_SYNCLINK_GT is not set
CONFIG_N_HDLC=m
# CONFIG_RISCOM8 is not set
CONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not set
CONFIG_SX=m
CONFIG_RIO=m
# CONFIG_RIO_OLDPCI is not set
CONFIG_STALDRV=y
# CONFIG_STALLION is not set
# CONFIG_ISTALLION is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
CONFIG_IPMI_HANDLER=y
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=m
# CONFIG_IPMI_WATCHDOG is not set
CONFIG_IPMI_POWEROFF=y
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_INTEL is not set
CONFIG_HW_RANDOM_AMD=y
# CONFIG_HW_RANDOM_GEODE is not set
CONFIG_HW_RANDOM_VIA=y
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
CONFIG_DTLK=y
CONFIG_R3964=m
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_CARDMAN_4000=y
CONFIG_CARDMAN_4040=m
CONFIG_MWAVE=y
# CONFIG_PC8736x_GPIO is not set
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=y
#
# TPM devices
#
#
# I2C support
#
CONFIG_I2C=m
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
CONFIG_I2C_PCA_ISA=m
#
# Miscellaneous I2C Chip support
#
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_I2C_DEBUG_CHIP=y
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
CONFIG_W1=y
# CONFIG_W1_CON is not set
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2433 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
CONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM75 is not set
CONFIG_SENSORS_LM77=m
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM83 is not set
CONFIG_SENSORS_LM87=m
# CONFIG_SENSORS_LM90 is not set
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_HDAPS is not set
CONFIG_HWMON_DEBUG_CHIP=y
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
# CONFIG_VIDEO_V4L1 is not set
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_CX2341X=m
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_SAA5246A is not set
CONFIG_VIDEO_SAA5249=m
# CONFIG_VIDEO_SAA7134 is not set
CONFIG_VIDEO_HEXIUM_ORION=m
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
#
# Radio Adapters
#
CONFIG_RADIO_GEMTEK_PCI=m
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=m
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_ARC=m
# CONFIG_FB_VGA16 is not set
CONFIG_FB_HGA=m
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY=m
# CONFIG_FB_ATY_CT is not set
CONFIG_FB_ATY_GX=y
# CONFIG_FB_SIS is not set
CONFIG_FB_NEOMAGIC=m
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=m
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
CONFIG_FB_TRIDENT=m
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_VFAT_FS is not set
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
#
CONFIG_HFSPLUS_FS=m
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
CONFIG_HPFS_FS=y
CONFIG_QNX4FS_FS=y
CONFIG_SYSV_FS=y
CONFIG_UFS_FS=m
CONFIG_UFS_DEBUG=y
#
# Network File Systems
#
CONFIG_NFS_FS=m
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
CONFIG_NCP_FS=y
# CONFIG_NCPFS_PACKET_SIGNING is not set
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_CODA_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
CONFIG_ACORN_PARTITION_CUMANA=y
CONFIG_ACORN_PARTITION_EESOX=y
# CONFIG_ACORN_PARTITION_ICS is not set
# CONFIG_ACORN_PARTITION_ADFS is not set
CONFIG_ACORN_PARTITION_POWERTEC=y
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=y
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
# CONFIG_NLS_ISO8859_7 is not set
CONFIG_NLS_ISO8859_9=y
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_LIST=y
CONFIG_FRAME_POINTER=y
CONFIG_UNWIND_INFO=y
CONFIG_STACK_UNWIND=y
# CONFIG_FORCED_INLINING is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_RCU_TORTURE_TEST=y
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_RODATA=y
CONFIG_4KSTACKS=y
CONFIG_DOUBLEFAULT=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_CAPABILITIES=y
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_CAST5=m
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_TEA=y
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
# CONFIG_CRYPTO_DEV_PADLOCK_SHA is not set
#
# Library routines
#
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 39a9f8c..5ac61e1 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -213,7 +213,7 @@ config ISI
config SYNCLINK
tristate "Microgate SyncLink card support"
- depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
+ depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API && HDLC
help
Provides support for the SyncLink ISA and PCI multiprotocol serial
adapters. These adapters support asynchronous and HDLC bit
@@ -226,7 +226,7 @@ config SYNCLINK
config SYNCLINKMP
tristate "SyncLink Multiport support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && HDLC
help
Enable support for the SyncLink Multiport (2 or 4 ports)
serial adapter, running asynchronous and HDLC communications up
diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig
index 27c1179..2b852bf 100644
--- a/drivers/char/pcmcia/Kconfig
+++ b/drivers/char/pcmcia/Kconfig
@@ -7,7 +7,7 @@ menu "PCMCIA character devices"
config SYNCLINK_CS
tristate "SyncLink PC Card support"
- depends on PCMCIA
+ depends on PCMCIA && HDLC
help
Enable support for the SyncLink PC Card serial adapter, running
asynchronous and HDLC communications up to 512Kbps. The port is
Jeff Garzik wrote:
> Toralf F?rster wrote:
>
>> Hello,
>>
>> the build with the attached .config failed, make ends with:
>> ... UPD include/linux/compile.h
>> CC init/version.o
>> LD init/built-in.o
>> LD .tmp_vmlinux1
>> drivers/built-in.o: In function `hdlcdev_open':
>> synclink.c:(.text+0x650d5): undefined reference to `hdlc_open'
>> synclink.c:(.text+0x6510d): undefined reference to `hdlc_open'
>> ...
>> synclink_cs.c:(.text+0x7aece): undefined reference to `hdlc_ioctl'
>> drivers/built-in.o: In function `hdlcdev_init':
>> synclink_cs.c:(.text+0x7b336): undefined reference to `alloc_hdlcdev'
>> drivers/built-in.o: In function `hdlcdev_exit':
>> synclink_cs.c:(.text+0x7b434): undefined reference to
>> `unregister_hdlc_device'
>> make: *** [.tmp_vmlinux1] Error 1
>
>
> Does this patch work for you?
>
> Jeff
No, this patch is not acceptable.
This has been beaten to death in previous threads.
The problem is a mismatch in your kernel config between
generic hdlc (M) and synclink (Y).
synclink drivers can *optionally* support generic hdlc.
You *must* be able to build synclink driver without generic hdlc.
Because of this you *can't* just put in the generic hdlc dependency.
Several alternative patches were posted (3 or 4 months) ago.
No particular patch won the approval of all kernel developers,
so nothing was done.
--
Paul Fulghum
Microgate Systems, Ltd.
Paul Fulghum wrote:
> Jeff Garzik wrote:
>> Toralf F?rster wrote:
>>
>>> Hello,
>>>
>>> the build with the attached .config failed, make ends with:
>>> ... UPD include/linux/compile.h
>>> CC init/version.o
>>> LD init/built-in.o
>>> LD .tmp_vmlinux1
>>> drivers/built-in.o: In function `hdlcdev_open':
>>> synclink.c:(.text+0x650d5): undefined reference to `hdlc_open'
>>> synclink.c:(.text+0x6510d): undefined reference to `hdlc_open'
>>> ...
>>> synclink_cs.c:(.text+0x7aece): undefined reference to `hdlc_ioctl'
>>> drivers/built-in.o: In function `hdlcdev_init':
>>> synclink_cs.c:(.text+0x7b336): undefined reference to `alloc_hdlcdev'
>>> drivers/built-in.o: In function `hdlcdev_exit':
>>> synclink_cs.c:(.text+0x7b434): undefined reference to
>>> `unregister_hdlc_device'
>>> make: *** [.tmp_vmlinux1] Error 1
>>
>>
>> Does this patch work for you?
>>
>> Jeff
>
> No, this patch is not acceptable.
>
> This has been beaten to death in previous threads.
> The problem is a mismatch in your kernel config between
> generic hdlc (M) and synclink (Y).
>
> synclink drivers can *optionally* support generic hdlc.
> You *must* be able to build synclink driver without generic hdlc.
> Because of this you *can't* just put in the generic hdlc dependency.
>
> Several alternative patches were posted (3 or 4 months) ago.
> No particular patch won the approval of all kernel developers,
> so nothing was done.
The existing build breakage is unacceptable too. It's this bogosity
#ifdef CONFIG_HDLC_MODULE
#define CONFIG_HDLC 1
#endif
which directly causes the build breakage.
Unless someone fixes it The Right Way, my patch seems like the best we
can do. People who complain "you must be able to build without hdlc"
should step up and make it so. Currently, it is not so.
Jeff
Jeff Garzik wrote:
> Unless someone fixes it The Right Way, my patch seems like the best we
> can do. People who complain "you must be able to build without hdlc"
> should step up and make it so. Currently, it is not so.
I builds just fine with and without HDLC.
The only problem is defining synclink as built in
while defining hdlc as a module.
This patch *breaks* the driver.
My previous attempts (and those of others who suggested
different fixes) at preventing this kernel
misconfiguration were all rejected. I tried
repeatedly over many weeks.
I think purposefully breaking a driver while rejecting
fixes to the real problem is a bad idea.
--
Paul Fulghum
Microgate Systems, Ltd.
Paul Fulghum <[email protected]> writes:
> synclink drivers can *optionally* support generic hdlc.
> You *must* be able to build synclink driver without generic hdlc.
> Because of this you *can't* just put in the generic hdlc dependency.
>
> Several alternative patches were posted (3 or 4 months) ago.
> No particular patch won the approval of all kernel developers,
> so nothing was done.
I remember something actually did "won the approval". Don't remember
the details but I think it included conditional compilation, not
changing CONFIG_* macros (using different name(s) instead, just not
starting with "CONFIG_"), and IIRC no changes to Kconfigs.
At least I don't remember any objections to that last version so
I assumed it's closed.
Perhaps it was just a dream, who knows :-)
Nevertheless a fix outlined above would be acceptable, wouldn't it?
--
Krzysztof Halasa
Krzysztof Halasa wrote:
> I remember something actually did "won the approval". Don't remember
> the details but I think it included conditional compilation, not
> changing CONFIG_* macros (using different name(s) instead, just not
> starting with "CONFIG_"), and IIRC no changes to Kconfigs.
It's been a while so I don't remember the details
of each suggested fix. The fixes that came closest to
being accepted changed the Kconfigs.
> At least I don't remember any objections to that last version so
> I assumed it's closed.
>
> Perhaps it was just a dream, who knows :-)
We were in a perpetual state of:
1. supply patch
2. get criticism from new person just joining thread
3. change patch to address criticism
4. goto #1
After a few weeks of that, I gave up.
Since the only problem is compile errors with
a broken kernel configuration, I was willing to
go with the flow and leave it in the current
functional state as it has been for years.
> Nevertheless a fix outlined above would be acceptable, wouldn't it?
It breaks things by forcing the customer to include code
that is not required. That is an issue for embedded systems.
But since we seem stuck in a state where real fixes
are not allowed, and this breakage is constantly reintroduced,
the best thing may be to allow the breakage and I can
provide patches to customers to get things working again.
My preference would be to either fix the warnings (which
I've tried) or leave things in a working state (which
I've also tried), but neither option seems to be allowed.
--
Paul Fulghum
Microgate Systems, Ltd.
Paul Fulghum <[email protected]> writes:
> We were in a perpetual state of:
>
> 1. supply patch
> 2. get criticism from new person just joining thread
> 3. change patch to address criticism
> 4. goto #1
Right, the description fits. OTOH I recall the criticism had a fair
amount of merit. That's how the things work here. Been there many
times BTW.
>> Nevertheless a fix outlined above would be acceptable, wouldn't it?
>
> It breaks things by forcing the customer to include code
> that is not required. That is an issue for embedded systems.
Nope, the fix which didn't change Kconfig and just assumed HDLC=m and
SYNCLINK*=y => HDLC is not available. I.e., the one with
#if defined(CONFIG_HDLC_MODULE) &&/|| defined(CONFIG_SYNCLINK*something)
#define CONFIG_HDLC something
changed into
#if defined(CONFIG_HDLC_MODULE) &&/|| defined(CONFIG_SYNCLINK*something)
#define USE_HDLC something
^^^^^^^^
> But since we seem stuck in a state where real fixes
> are not allowed, and this breakage is constantly reintroduced,
It may look like that sometimes but it's not real. Anyway I think
everyone would benefit from the correct fix and the issue wouldn't
come again. Having looked at it I'd fix it myself but I'm pretty
sure you still have the old patch (which changes CONFIG_ macros
outside Kconfig, I mean in .c files) and it could be trivially
modified then applied (and perhaps tested with real hardware if
needed).
--
Krzysztof Halasa
Am Monday 13 November 2006 15:49 schrieb Jeff Garzik:
> Toralf F?rster wrote:
> > Hello,
> >
> > the build with the attached .config failed, make ends with:
> > ...
> > UPD include/linux/compile.h
> > CC init/version.o
> > LD init/built-in.o
> > LD .tmp_vmlinux1
> > drivers/built-in.o: In function `hdlcdev_open':
> > synclink.c:(.text+0x650d5): undefined reference to `hdlc_open'
> > synclink.c:(.text+0x6510d): undefined reference to `hdlc_open'
> > ...
> > synclink_cs.c:(.text+0x7aece): undefined reference to `hdlc_ioctl'
> > drivers/built-in.o: In function `hdlcdev_init':
> > synclink_cs.c:(.text+0x7b336): undefined reference to `alloc_hdlcdev'
> > drivers/built-in.o: In function `hdlcdev_exit':
> > synclink_cs.c:(.text+0x7b434): undefined reference to `unregister_hdlc_device'
> > make: *** [.tmp_vmlinux1] Error 1
>
> Does this patch work for you?
>
> Jeff
>
>
>
No, only the generated .config changed, but make failes again:
tfoerste@n22 ~/devel/linux-2.6 $ diff .config ../results/config.rnd.119
4c4
< # Mon Nov 13 17:45:00 2006
---
> # Fri Nov 10 13:26:43 2006
514a515
> CONFIG_SYNCLINK_CS=y
--
MfG/Sincerely
Toralf F?rster
Krzysztof Halasa wrote:
>>We were in a perpetual state of:
>>
>>1. supply patch
>>2. get criticism from new person just joining thread
>>3. change patch to address criticism
>>4. goto #1
>
>
> Right, the description fits. OTOH I recall the criticism had a fair
> amount of merit. That's how the things work here. Been there many
> times BTW.
To be more precise, that is many distinct
criticisms from distinct people, some of which
contradict each other.
I know code is open to criticism,
but after several weeks of submitting patches
and getting no closer to acceptance I gave up.
We were going around in circles where one person
wanted some thing that conflicted with what
another person wanted.
>>But since we seem stuck in a state where real fixes
>>are not allowed, and this breakage is constantly reintroduced,
>
> It may look like that sometimes but it's not real. Anyway I think
> everyone would benefit from the correct fix and the issue wouldn't
> come again. Having looked at it I'd fix it myself but I'm pretty
> sure you still have the old patch (which changes CONFIG_ macros
> outside Kconfig, I mean in .c files) and it could be trivially
> modified then applied (and perhaps tested with real hardware if
> needed).
There isn't much point in resubmitting the previously
rejected patches only to be rejected again.
I was planning on trying again in a month or two
to see if all the people who rejected all of the
previous patches have come to some sort of agreement.
Without such agreement we are left in the state
of never ending patches.
--
Paul Fulghum
Microgate Systems, Ltd.
Paul Fulghum <[email protected]> writes:
> To be more precise, that is many distinct
> criticisms from distinct people, some of which
> contradict each other.
That's not exactly how I remember it.
See Andrew's mail http://lkml.org/lkml/2006/6/7/257. For me, your
response(s) meant the problem was solved (so it wans't a dream :-) ).
For reference, the original patch which was almost accepted was
http://lkml.org/lkml/2006/6/7/111.
Kconfig patches were clearly a dead end, Randy hadn't realized HDLC
is optional for the synclink drivers.
--
Krzysztof Halasa
On Mon, 13 Nov 2006 15:40:34 -0600
Paul Fulghum <[email protected]> wrote:
> I know code is open to criticism,
> but after several weeks of submitting patches
> and getting no closer to acceptance I gave up.
> We were going around in circles where one person
> wanted some thing that conflicted with what
> another person wanted.
That happens sometimes.
I'd suggest that you send what you believe to be the correct change and see
if you can preempt the usual objections via the changelog.
I wouldn't say it's a high-priority thing, btw. There are surely plenty of
won't-link config settings and few people are hurting from this one.
Krzysztof Halasa wrote:
> That's not exactly how I remember it.
>
> See Andrew's mail http://lkml.org/lkml/2006/6/7/257. For me, your
> response(s) meant the problem was solved (so it wans't a dream :-) ).
Wrong
I submitted that patch and more people started
saying that patch was unacceptable (for new reasons).
(It was submitted as a different thread)
It's at that point I gave up.
--
Paul
On Tue, 14 Nov 2006 00:05:28 +0100 Krzysztof Halasa wrote:
> Paul Fulghum <[email protected]> writes:
>
> > To be more precise, that is many distinct
> > criticisms from distinct people, some of which
> > contradict each other.
>
> That's not exactly how I remember it.
>
> See Andrew's mail http://lkml.org/lkml/2006/6/7/257. For me, your
> response(s) meant the problem was solved (so it wans't a dream :-) ).
>
> For reference, the original patch which was almost accepted was
> http://lkml.org/lkml/2006/6/7/111.
>
> Kconfig patches were clearly a dead end, Randy hadn't realized HDLC
> is optional for the synclink drivers.
Correct.
---
~Randy
Andrew Morton wrote:
> I'd suggest that you send what you believe to be the correct change and see
> if you can preempt the usual objections via the changelog.
OK, I'll review this and start resubmitting
when my current backlog of work clears.
I'm not really sure how to preempt objections
with the changelog. The objections seemed to be
against the fundemental mechanism of the patch.
--
Paul
On Mon, 13 Nov 2006, Paul Fulghum wrote:
> I'm not really sure how to preempt objections
> with the changelog. The objections seemed to be
> against the fundemental mechanism of the patch.
In your changelog, explain why you're doing things differently from how
some people will suggest. That way, when new people read the new thread
started by your new patch, they see the results of the previous cycle and
don't rehash old arguments. This also means that people in the future
wondering why the code is weird there can find out without extensive
mailing list searching.
-Daniel
*This .sig left intentionally blank*
Paul Fulghum <[email protected]> writes:
> Wrong
>
> I submitted that patch and more people started
> saying that patch was unacceptable (for new reasons).
> (It was submitted as a different thread)
>
> It's at that point I gave up.
I must have missed the new thread then. Do you have a copy of that
mail (or some other pointer)? I can't find it in the archives without
some hint and I'm really interested in what people found to be
unacceptable.
Thanks.
--
Krzysztof Halasa
Krzysztof Halasa wrote:
> I must have missed the new thread then. Do you have a copy of that
> mail (or some other pointer)? I can't find it in the archives without
> some hint and I'm really interested in what people found to be
> unacceptable.
Looking back over the archives, the 'other' thread I was thinking
about was the preceding thread to the one you quoted:
http://www.ussg.iu.edu/hypermail/linux/kernel/0606.0/1608.html
The thread you point to was the final thread, but you
were missing the follow ups where other changes were
requested even after Andrew's post:
http://www.ussg.iu.edu/hypermail/linux/kernel/0606.1/0489.html
I think at that point (it has been a while), having just heard
'do this and your OK' from Andrew, but other people still wanting
something else I got frustrated, said 'no more' and stopped.
In hind sight, I should have ignored the posts that followed
and posted what Andrew suggested. When I look at this again,
I will take that approach.
--
Paul
Paul Fulghum <[email protected]> writes:
> In hind sight, I should have ignored the posts that followed
> and posted what Andrew suggested. When I look at this again,
> I will take that approach.
Great, thanks.
--
Krzysztof Halasa