Hi all,
Changes since 20100208:
The microblaze tree gained a conflict against Linus' tree.
The pci tree gained a build failure so I used the version from
next-20100208.
The net tree lost its build failure and gained a conflict against the
wireless-current tree.
The fsnotify tree lost 3 conflicts, but gained several more against
the vfs tree.
----------------------------------------------------------------------------
I have created today's linux-next tree at
git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
(patches at http://www.kernel.org/pub/linux/kernel/v2.6/next/ ). If you
are tracking the linux-next tree using git, you should not use "git pull"
to do so as that will try to merge the new linux-next release with the
old one. You should use "git fetch" as mentioned in the FAQ on the wiki
(see below).
You can see which trees have been included by looking in the Next/Trees
file in the source. There are also quilt-import.log and merge.log files
in the Next directory. Between each merge, the tree was built with
a ppc64_defconfig for powerpc and an allmodconfig for x86_64. After the
final fixups (if any), it is also built with powerpc allnoconfig (32 and
64 bit), ppc44x_defconfig and allyesconfig (minus
CONFIG_PROFILE_ALL_BRANCHES - this fails its final link) and i386, sparc
and sparc64 defconfig. These builds also have
CONFIG_ENABLE_WARN_DEPRECATED, CONFIG_ENABLE_MUST_CHECK and
CONFIG_DEBUG_INFO disabled when necessary.
Below is a summary of the state of the merge.
We are up to 157 trees (counting Linus' and 22 trees of patches pending
for Linus' tree), more are welcome (even if they are currently empty).
Thanks to those who have contributed, and to those who haven't, please do.
Status of my local build tests will be at
http://kisskb.ellerman.id.au/linux-next . If maintainers want to give
advice about cross compilers/configs that work, we are always open to add
more builds.
Thanks to Jan Dittmer for adding the linux-next tree to his build tests
at http://l4x.org/k/ , the guys at http://test.kernel.org/ and Randy
Dunlap for doing many randconfig builds.
There is a wiki covering stuff to do with linux-next at
http://linux.f-seidel.de/linux-next/pmwiki/ . Thanks to Frank Seidel.
--
Cheers,
Stephen Rothwell [email protected]
$ git checkout master
$ git reset --hard stable
Merging origin/master
Merging fixes/fixes
Merging arm-current/master
Merging m68k-current/for-linus
Merging powerpc-merge/merge
Merging sparc-current/master
Merging scsi-rc-fixes/master
Merging net-current/master
Merging sound-current/for-linus
Merging pci-current/for-linus
Merging wireless-current/master
Merging kbuild-current/for-linus
Merging quilt/driver-core.current
Merging quilt/tty.current
Merging quilt/usb.current
Merging quilt/staging.current
Merging cpufreq-current/fixes
Merging input-current/for-linus
Merging md-current/for-linus
Merging audit-current/for-linus
Merging crypto-current/master
Merging ide-curent/master
Merging dwmw2/master
Merging arm/devel
CONFLICT (content): Merge conflict in arch/arm/mach-mx25/clock.c
Merging davinci/davinci-next
Merging msm/for-next
Merging omap/for-next
CONFLICT (content): Merge conflict in arch/arm/mach-omap1/include/mach/debug-macro.S
CONFLICT (content): Merge conflict in arch/arm/mach-omap2/include/mach/debug-macro.S
Merging pxa/for-next
Merging samsung/next-samsung
Merging avr32/avr32-arch
Merging blackfin/for-linus
Merging cris/for-next
Merging ia64/test
Merging m68k/for-next
Merging m68knommu/for-next
Merging microblaze/next
CONFLICT (content): Merge conflict in arch/microblaze/kernel/setup.c
Merging mips/mips-for-linux-next
Merging parisc/next
Merging powerpc/next
Merging 4xx/next
Merging 52xx-and-virtex/next
Merging galak/next
Merging s390/features
Merging sh/master
Merging genesis/master
CONFLICT (content): Merge conflict in arch/arm/Kconfig
Merging sparc/master
Merging xtensa/master
Merging ceph/for-next
CONFLICT (content): Merge conflict in fs/gfs2/super.c
Merging cifs/master
Merging configfs/linux-next
Merging ecryptfs/next
Merging ext3/for_next
Merging ext4/next
Merging fatfs/master
Merging fuse/for-next
Merging gfs2/master
Merging jfs/next
Merging logfs/master
Merging nfs/linux-next
CONFLICT (content): Merge conflict in fs/nfs/inode.c
Applying: ceph: update for BDI_RECLAIMABLE change
Merging nfsd/nfsd-next
Merging nilfs2/for-next
Merging ocfs2/linux-next
Merging squashfs/master
Merging udf/for_next
Merging v9fs/for-next
CONFLICT (add/add): Merge conflict in fs/9p/cache.c
Merging ubifs/linux-next
Merging xfs/master
Merging reiserfs-bkl/reiserfs/kill-bkl
Merging vfs/for-next
CONFLICT (content): Merge conflict in fs/gfs2/super.c
Applying: logfs: fixup for write_inode API change
Merging pci/linux-next
$ git reset --hard HEAD^
Merging refs/next/20100208/pci
Merging hid/for-next
Merging quilt/i2c
Merging bjdooks-i2c/next-i2c
CONFLICT (content): Merge conflict in drivers/i2c/busses/Kconfig
CONFLICT (content): Merge conflict in drivers/i2c/busses/Makefile
Merging quilt/jdelvare-hwmon
Merging quilt/kernel-doc
Merging v4l-dvb/master
Merging kbuild/for-next
Merging kconfig/for-next
Merging ide/master
Merging libata/NEXT
Merging infiniband/for-next
Merging acpi/test
Merging ieee1394/for-next
Merging ubi/linux-next
Merging kvm/linux-next
CONFLICT (content): Merge conflict in arch/x86/kvm/mmu.c
CONFLICT (content): Merge conflict in arch/x86/kvm/x86.c
Merging dlm/next
Merging scsi/master
Merging async_tx/next
Merging net/master
CONFLICT (content): Merge conflict in net/mac80211/scan.c
Merging wireless/master
Merging mtd/master
Merging crypto/master
Merging sound/for-next
Merging cpufreq/next
Merging quilt/rr
CONFLICT (content): Merge conflict in drivers/char/hvc_console.c
CONFLICT (content): Merge conflict in drivers/char/hvc_console.h
Merging mmc/next
Merging tmio-mmc/linux-next
CONFLICT (content): Merge conflict in drivers/mfd/asic3.c
CONFLICT (content): Merge conflict in drivers/mfd/t7l66xb.c
CONFLICT (content): Merge conflict in drivers/mfd/tc6387xb.c
CONFLICT (content): Merge conflict in drivers/mfd/tc6393xb.c
CONFLICT (add/add): Merge conflict in drivers/mfd/tmio_core.c
CONFLICT (content): Merge conflict in drivers/mmc/host/tmio_mmc.c
CONFLICT (content): Merge conflict in drivers/mmc/host/tmio_mmc.h
CONFLICT (content): Merge conflict in include/linux/mfd/tmio.h
Merging input/next
Merging lsm/for-next
Merging block/for-next
Merging quilt/device-mapper
Merging embedded/master
Merging firmware/master
Merging pcmcia/master
Merging battery/master
Merging leds/for-mm
Merging backlight/for-mm
Merging kgdb/kgdb-next
Merging slab/for-next
Merging uclinux/for-next
Merging md/for-next
Merging mfd/for-next
CONFLICT (content): Merge conflict in drivers/mfd/Makefile
Merging hdlc/hdlc-next
Merging drm/drm-next
Merging voltage/for-next
Merging security-testing/next
CONFLICT (content): Merge conflict in security/tomoyo/realpath.c
Merging lblnet/master
Merging agp/agp-next
Merging uwb/for-upstream
Merging watchdog/master
Merging bdev/master
Merging dwmw2-iommu/master
Merging cputime/cputime
Merging osd/linux-next
Merging jc_docs/docs-next
Merging nommu/master
Merging trivial/for-next
CONFLICT (content): Merge conflict in arch/arm/mach-u300/include/mach/debug-macro.S
CONFLICT (content): Merge conflict in arch/arm/plat-s3c64xx/irq.c
CONFLICT (content): Merge conflict in arch/arm/plat-s5pc1xx/irq.c
CONFLICT (delete/modify): arch/mips/alchemy/common/reset.c deleted in HEAD and modified in trivial/for-next. Version trivial/for-next of arch/mips/alchemy/common/reset.c left in tree.
$ git rm -f arch/mips/alchemy/common/reset.c
Merging audit/for-next
Merging quilt/aoe
Merging suspend/linux-next
Merging bluetooth/master
Merging fsnotify/for-next
CONFLICT (content): Merge conflict in fs/namei.c
CONFLICT (content): Merge conflict in include/linux/audit.h
CONFLICT (content): Merge conflict in include/linux/fsnotify.h
CONFLICT (content): Merge conflict in kernel/audit_tree.c
CONFLICT (content): Merge conflict in kernel/auditsc.c
Merging irda/for-next
CONFLICT (content): Merge conflict in drivers/net/irda/irda-usb.c
Merging hwlat/for-linus
CONFLICT (content): Merge conflict in MAINTAINERS
CONFLICT (content): Merge conflict in drivers/misc/Makefile
Merging drbd/for-jens
Merging catalin/for-next
Merging alacrity/linux-next
CONFLICT (content): Merge conflict in include/linux/Kbuild
CONFLICT (content): Merge conflict in lib/Kconfig
Merging i7core_edac/linux_next
Merging devicetree/next-devicetree
Merging spi/next-spi
Merging limits/writable_limits
CONFLICT (content): Merge conflict in arch/x86/ia32/ia32entry.S
CONFLICT (content): Merge conflict in arch/x86/include/asm/unistd_32.h
CONFLICT (content): Merge conflict in arch/x86/include/asm/unistd_64.h
CONFLICT (content): Merge conflict in arch/x86/kernel/syscall_table_32.S
Merging omap_dss2/for-next
CONFLICT (content): Merge conflict in arch/arm/mach-omap2/board-am3517evm.c
Merging als/for-next
Merging tip/auto-latest
Merging edac-amd/for-next
Merging oprofile/for-next
Merging percpu/for-next
CONFLICT (content): Merge conflict in drivers/net/macvlan.c
CONFLICT (content): Merge conflict in include/linux/ftrace_event.h
CONFLICT (content): Merge conflict in include/trace/ftrace.h
CONFLICT (content): Merge conflict in kernel/trace/trace_event_profile.c
CONFLICT (content): Merge conflict in kernel/trace/trace_kprobe.c
CONFLICT (content): Merge conflict in kernel/trace/trace_syscalls.c
CONFLICT (content): Merge conflict in net/ipv6/proc.c
Applying: slab: update for percpu API change
Applying: percpu: macvlan merge fix
Merging workqueues/for-next
Merging sfi/sfi-test
Merging asm-generic/next
Merging hwpoison/hwpoison
Merging sysctl/master
Merging quilt/driver-core
CONFLICT (content): Merge conflict in drivers/base/power/main.c
CONFLICT (content): Merge conflict in drivers/pcmcia/ds.c
Merging quilt/tty
Merging quilt/usb
Merging quilt/staging
CONFLICT (delete/modify): drivers/staging/sm7xx/smtc2d.c deleted in quilt/staging and modified in HEAD. Version HEAD of drivers/staging/sm7xx/smtc2d.c left in tree.
CONFLICT (delete/modify): drivers/staging/sm7xx/smtc2d.h deleted in quilt/staging and modified in HEAD. Version HEAD of drivers/staging/sm7xx/smtc2d.h left in tree.
$ git rm -f drivers/staging/sm7xx/smtc2d.c drivers/staging/sm7xx/smtc2d.h
Merging scsi-post-merge/master
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-rc7-autotest-next-20100209 (root@mls21b) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP Tue Feb 9 15:56:08 IST 2010
Command line: root=/dev/disk/by-id/scsi-3500000e015c26a80-part1 console=tty0 console=ttyS1,19200 IDENT=1265712119
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cffa3900 (usable)
BIOS-e820: 00000000cffa3900 - 00000000cffa7400 (ACPI data)
BIOS-e820: 00000000cffa7400 - 00000000d0000000 (reserved)
BIOS-e820: 00000000f4000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
No AGP bridge found
last_pfn = 0x130000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xcffa3 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff88000009c140] 9c140
init_memory_mapping: 0000000000000000-00000000cffa3000
init_memory_mapping: 0000000100000000-0000000130000000
RAMDISK: 37702000 - 37fefbdf
ACPI: RSDP 00000000000fdfe0 00014 (v00 IBM )
ACPI: RSDT 00000000cffa7380 00038 (v01 IBM SERLEWIS 00001000 IBM 45444F43)
ACPI: FACP 00000000cffa72c0 00084 (v02 IBM SERLEWIS 00001000 IBM 45444F43)
ACPI: DSDT 00000000cffa3900 036CE (v01 IBM SERLEWIS 00001000 INTL 20060912)
ACPI: FACS 00000000cffa7040 00040
ACPI: APIC 00000000cffa7200 00090 (v01 IBM SERLEWIS 00001000 IBM 45444F43)
ACPI: SRAT 00000000cffa7100 000E8 (v01 AMD HAMMER 00000001 AMD 00000001)
ACPI: HPET 00000000cffa70c0 00038 (v01 IBM SERLEWIS 00001000 IBM 45444F43)
ACPI: MCFG 00000000cffa7080 0003C (v01 IBM SERLEWIS 00001000 IBM 45444F43)
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 1 -> APIC 0x02 -> Node 1
SRAT: PXM 1 -> APIC 0x03 -> Node 1
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-d0000000
SRAT: Node 0 PXM 0 100000000-130000000
Bootmem setup node 0 0000000000000000-0000000130000000
NODE_DATA [000000000000f640 - 000000000002363f]
bootmap [0000000000024000 - 0000000000049fff] pages 26
(14 early reservations) ==> bootmem [0000000000 - 0130000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0001000000 - 0005e8a494] TEXT DATA BSS ==> [0001000000 - 0005e8a494]
#2 [0037702000 - 0037fefbdf] RAMDISK ==> [0037702000 - 0037fefbdf]
#3 [0005e8b000 - 0005e8b2d0] BRK ==> [0005e8b000 - 0005e8b2d0]
#4 [000009c000 - 000009c140] BIOS reserved ==> [000009c000 - 000009c140]
#5 [000009c140 - 000009c150] MP-table mpf ==> [000009c140 - 000009c150]
#6 [000009c150 - 000009dce0] BIOS reserved ==> [000009c150 - 000009dce0]
#7 [000009de64 - 0000100000] BIOS reserved ==> [000009de64 - 0000100000]
#8 [000009dce0 - 000009de64] MP-table mpc ==> [000009dce0 - 000009de64]
#9 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000]
#10 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
#11 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#12 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000]
#13 [000000d000 - 000000f640] MEMNODEMAP ==> [000000d000 - 000000f640]
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00130000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009c
0: 0x00000100 -> 0x000cffa3
0: 0x00100000 -> 0x00130000
Detected use of extended apic ids on hypertransport bus
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x488
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x0d] address[0xfec02000] gsi_base[16])
IOAPIC[1]: apic_id 13, version 17, address 0xfec02000, GSI 16-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x1166a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 00000000cffa3000 - 00000000cffa4000
PM: Registered nosave memory: 00000000cffa4000 - 00000000cffa7000
PM: Registered nosave memory: 00000000cffa7000 - 00000000cffa8000
PM: Registered nosave memory: 00000000cffa8000 - 00000000d0000000
PM: Registered nosave memory: 00000000d0000000 - 00000000f4000000
PM: Registered nosave memory: 00000000f4000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
Allocating PCI resources starting at d0000000 (gap: d0000000:24000000)
setup_percpu: NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:2
PERCPU: Embedded 28 pages/cpu @ffff880009c00000 s85544 r8192 d20952 u524288
pcpu-alloc: s85544 r8192 d20952 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031245
Policy zone: Normal
Kernel command line: root=/dev/disk/by-id/scsi-3500000e015c26a80-part1 console=tty0 console=ttyS1,19200 IDENT=1265712119
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ f4000000 size 64 MB
Node 1: aperture @ f4000000 size 64 MB
Memory: 3977660k/4980736k available (3446k kernel code, 787208k absent, 215868k reserved, 4993k data, 952k init)
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is enabled.
NR_IRQS:4352
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS1] enabled
allocated 41943040 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Fast TSC calibration using PIT
Detected 2199.695 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.39 BogoMIPS (lpj=8798780)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
using C1E aware idle routine
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
ACPI: Core revision 20100121
------------[ cut here ]------------
WARNING: at arch/x86/mm/ioremap.c:111 __ioremap_caller+0x169/0x2f1()
Hardware name: BladeCenter LS21 -[79716AA]-
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.33-rc7-autotest-next-20100209 #1
Call Trace:
[<ffffffff81023d4b>] ? __ioremap_caller+0x169/0x2f1
[<ffffffff81040685>] warn_slowpath_common+0x77/0xa4
[<ffffffff810406c1>] warn_slowpath_null+0xf/0x11
[<ffffffff81023d4b>] __ioremap_caller+0x169/0x2f1
[<ffffffff81346065>] ? acpi_os_map_memory+0x12/0x1b
[<ffffffff81023f5c>] ioremap_nocache+0x12/0x14
[<ffffffff81346065>] acpi_os_map_memory+0x12/0x1b
[<ffffffff81259f04>] acpi_tb_verify_table+0x29/0x5b
[<ffffffff81259754>] acpi_load_tables+0x39/0x15a
[<ffffffff8187fc14>] acpi_early_init+0x60/0xf5
[<ffffffff81855cad>] start_kernel+0x397/0x3a7
[<ffffffff81855295>] x86_64_start_reservations+0xa5/0xa9
[<ffffffff8185537a>] x86_64_start_kernel+0xe1/0xe8
---[ end trace 4eaa2a86a8e2da22 ]---
ioremap reserve_memtype failed -22
ACPI Exception: AE_NO_ACPI_TABLES, While loading namespace from ACPI tables (20100121/tbxface-604)
ACPI: Unable to load the System Description Tables
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Dual-Core AMD Opteron(tm) Processor 2218 stepping 02
Booting Node 0, Processors #1 #2 #3 Ok.
Brought up 4 CPUs
Total of 4 processors activated (17600.10 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
TOM: 00000000d0000000 aka 3328M
TOM2: 0000000130000000 aka 4864M
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter disabled.
vgaarb: loaded
PCI: Probing PCI hardware
pci 0000:00:01.0: Enabling HT MSI Mapping
pci 0000:00:01.0: PCI bridge to [bus 01-02]
pci 0000:01:0d.0: PCI bridge to [bus 02-02]
pci 0000:00:06.0: PCI bridge to [bus 03-03]
pci 0000:00:07.0: PCI bridge to [bus 04-04]
pci 0000:00:08.0: PCI bridge to [bus 05-05]
pci 0000:00:09.0: PCI bridge to [bus 06-06]
pci 0000:00:0a.0: PCI bridge to [bus 07-07]
pci 0000:00:0b.0: PCI bridge to [bus 08-08]
vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI: disabled
pci 0000:00:06.0: BAR 9: assigned [mem 0xd0000000-0xd00fffff pref]
pci 0000:00:05.0: BAR 6: assigned [mem 0xd0100000-0xd011ffff pref]
pci 0000:01:0d.0: PCI bridge to [bus 02-02]
pci 0000:01:0d.0: bridge window [io disabled]
pci 0000:01:0d.0: bridge window [mem 0xe2000000-0xe6ffffff]
pci 0000:01:0d.0: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI bridge to [bus 01-02]
pci 0000:00:01.0: bridge window [io disabled]
pci 0000:00:01.0: bridge window [mem 0xe2000000-0xe7ffffff]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:03:04.0: BAR 6: assigned [mem 0xd0000000-0xd00fffff pref]
pci 0000:00:06.0: PCI bridge to [bus 03-03]
pci 0000:00:06.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:06.0: bridge window [mem 0xdf000000-0xe00fffff]
pci 0000:00:06.0: bridge window [mem 0xd0000000-0xd00fffff pref]
pci 0000:00:07.0: PCI bridge to [bus 04-04]
pci 0000:00:07.0: bridge window [io disabled]
pci 0000:00:07.0: bridge window [mem 0xdd000000-0xddffffff]
pci 0000:00:07.0: bridge window [mem pref disabled]
pci 0000:00:08.0: PCI bridge to [bus 05-05]
pci 0000:00:08.0: bridge window [io disabled]
pci 0000:00:08.0: bridge window [mem 0xdc000000-0xdcffffff]
pci 0000:00:08.0: bridge window [mem pref disabled]
pci 0000:00:09.0: PCI bridge to [bus 06-06]
pci 0000:00:09.0: bridge window [io disabled]
pci 0000:00:09.0: bridge window [mem 0xdb000000-0xdbffffff]
pci 0000:00:09.0: bridge window [mem pref disabled]
pci 0000:00:0a.0: PCI bridge to [bus 07-07]
pci 0000:00:0a.0: bridge window [io disabled]
pci 0000:00:0a.0: bridge window [mem 0xda000000-0xdaffffff]
pci 0000:00:0a.0: bridge window [mem pref disabled]
pci 0000:00:0b.0: PCI bridge to [bus 08-08]
pci 0000:00:0b.0: bridge window [io disabled]
pci 0000:00:0b.0: bridge window [mem 0xd9000000-0xd9ffffff]
pci 0000:00:0b.0: bridge window [mem pref disabled]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: disabled boot interrupts on device [1166:0205]
pci 0000:00:08.0: Found enabled HT MSI Mapping
pci 0000:00:09.0: Found enabled HT MSI Mapping
pci 0000:00:0a.0: Found enabled HT MSI Mapping
pci 0000:00:0b.0: Found enabled HT MSI Mapping
Unpacking initramfs...
Freeing initrd memory: 9142k freed
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ f4000000 size 65536 KB
init_memory_mapping: 00000000f4000000-00000000f8000000
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
platform rtc_cmos: registered platform RTC device (no PNP device found)
audit: initializing netlink socket (disabled)
type=2000 audit(1265712261.588:1): initialized
rcu-torture:--- Start of test: nreaders=8 nfakewriters=4 stat_interval=0 verbose=0 test_no_idle_hz=0 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7915
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
registered taskstats version 1
Freeing unused kernel memory: 952k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 632k freed
Freeing unused kernel memory: 244k freed
doing fast boot
SCSI subsystem initialized
Fusion MPT base driver 3.04.14
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SAS Host driver 3.04.14
mptsas 0000:03:04.0: can't find IRQ for PCI INT A; probably buggy MP table
mptbase: ioc0: Initiating bringup
ioc0: LSISAS1064 A3: Capabilities={Initiator}
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x2, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x1, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x0, page 0x2, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x9, page 0x0, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
scsi0 : ioc0: LSISAS1064 A3, FwRev=000a0f00h, Ports=1, MaxQ=511, IRQ=9
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x10, page 0x0, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x10, page 0x0, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x12, page 0x0, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x11, page 0x0, action 0
FATAL: Error inserting thermal (/lib/modules/2.6BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
.33-rc7-autotestudevd version 128 started
-next-20100209/kernel/drivers/acpi/thermal.ko): No such device
usbcore: registered new interface driver usbfs
FATAL: Error insusbcore: registered new interface driver hub
erting fan (/libusbcore: registered new device driver usb
/modules/2.6.33-ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
rc7-autotest-nexehci_hcd 0000:00:03.2: can't find IRQ for PCI INT A; probably buggy MP table
t-20100209/kerneehci_hcd 0000:00:03.2: EHCI Host Controller
l/drivers/acpi/fehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
an.ko): No such device
FATAL: Module jbd not foehci_hcd 0000:00:03.2: irq 5, io mem 0xf3ffd000
und.
FATAL: Module ext3 not fouehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
nd.
Creating deusb usb1: New USB device found, idVendor=1d6b, idProduct=0002
vice nodes with usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
udev
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.33-rc7-autotest-next-20100209 ehci_hcd
usb usb1: SerialNumber: 0000:00:03.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:03.0: can't find IRQ for PCI INT A; probably buggy MP table
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 5, io mem 0xf3fff000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.33-rc7-autotest-next-20100209 ohci_hcd
usb usb2: SerialNumber: 0000:00:03.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd 0000:00:03.1: can't find IRQ for PCI INT A; probably buggy MP table
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 5, io mem 0xf3ffe000
usb 1-4: new high speed USB device using ehci_hcd and address 2
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.33-rc7-autotest-next-20100209 ohci_hcd
usb usb3: SerialNumber: 0000:00:03.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
blogd: Warning: the ioctl TIOCGDEV is not known by the kernel
Boot logging started on /dev/ttyS1(/dev/console) at Tue Feb 9 10:51:49 2010
Trying manual resume from /dev/disk/by-id/scsi-3500000e015c26a80-part2
resume device /dev/disk/by-id/scsi-3500000e015c26a80-part2 not found (ignoring)
Trying manual resume from /dev/disk/by-id/scsi-3500000e015c26a80-part2
resume device /dev/disk/by-id/scsi-3500000e015c26a80-part2 not found (ignoring)
Waiting for device /dev/disk/by-id/scsi-3500000e015c26a80-part1 to appear: ....ehci_hcd 0000:00:03.2: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
...........usb 1-4: device not accepting address 2, error -110
usb 1-4: new high speed USB device using ehci_hcd and address 3
.............mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
..Could not find /dev/disk/by-id/scsi-3500000e015c26a80-part1.
Want me to fall back to /dev/disk/by-id/scsi-3500000e015c26a80-part1? (Y/n)
usb 1-4: device not accepting address 3, error -110
usb 1-4: new high speed USB device using ehci_hcd and address 4
usb 1-4: device not accepting address 4, error -110
usb 1-4: new high speed USB device using ehci_hcd and address 5
usb 1-4: device not accepting address 5, error -110
hub 1-0:1.0: unable to enumerate USB device on port 4
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x12, page 0x0, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x2, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x10, page 0x0, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x11, page 0x0, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x12, page 0x0, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x2, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x10, page 0x0, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x11, page 0x0, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x12, page 0x0, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery
mptbase: ioc0: Attempting Retry Config request type 0x1, page 0x2, action 0
mptbase: ioc0: WARNING - Issuing Reset from mpt_config!!
mptbase: ioc0: Initiating recovery