Hello!
Starting with next-20240130 (and perhaps a bit earlier), rcutorture gets
what initially looked like early-boot hangs, but only when running on
dual-socket x86 systems [1], as it it works just fine on my x86 laptop [2].
But when running on dual-socket systems, this happens all the time,
perhaps because rcutorture works hard to split each guest OS across a
socket boundary.
This is the reproducer:
tools/testing/selftests/rcutorture/bin/kvm.sh --allcpus --duration 1m --configs "10*TREE01" --trust-make
By "looked like early-boot hangs" I mean that qemu was quite happy,
but there was absolutely no console output.
Bisection identified this commit:
5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
Reverting this commit made the problem go away. Except that it is really
hard to imagine this commit having any effect whatsoever on early boot
execution. Of course, this might be a failure of imagination on my part,
so I enlisted the aid of gdb:
tools/testing/selftests/rcutorture/bin/kvm.sh --allcpus --duration 1m --configs "TREE01" --trust-make --gdb
After following the resulting gdb startup instructions and waiting for
about ten seconds, I hit control-C on the gdb window and then:
(gdb) bt
#0 default_idle () at arch/x86/kernel/process.c:743
#1 0xffffffff81e94d34 in default_idle_call () at kernel/sched/idle.c:97
#2 0xffffffff810d746d in cpuidle_idle_call () at kernel/sched/idle.c:170
#3 do_idle () at kernel/sched/idle.c:312
#4 0xffffffff810d76a4 in cpu_startup_entry (state=state@entry=CPUHP_ONLINE)
at kernel/sched/idle.c:410
#5 0xffffffff81e95417 in rest_init () at init/main.c:730
#6 0xffffffff8329adf2 in start_kernel () at init/main.c:1067
#7 0xffffffff832a5038 in x86_64_start_reservations (
real_mode_data=real_mode_data@entry=0x13d50 <exception_stacks+32080> <error: Cannot access memory at address 0x13d50>) at arch/x86/kernel/head64.c:555
#8 0xffffffff832a513c in x86_64_start_kernel (
real_mode_data=0x13d50 <exception_stacks+32080> <error: Cannot access memory at address 0x13d50>) at arch/x86/kernel/head64.c:536
#9 0xffffffff810001d2 in secondary_startup_64 ()
at arch/x86/kernel/head_64.S:461
#10 0x0000000000000000 in ?? ()
(gdb) print jiffies
$1 = 4294676330
(gdb) print system_state
$2 = SYSTEM_RUNNING
In other words, the system really has booted, and at least one CPU is
happily idling in the idle loop. And another CPU is (maybe not quite
so happily) running rcutorture:
(gdb) thread 6
[Switching to thread 6 (Thread 1.6)]
#0 0xffffffff8111160b in rcu_torture_one_read (
trsp=trsp@entry=0xffffc900004abe90, myid=myid@entry=4)
at kernel/rcu/rcutorture.c:2003
2003 completed = cur_ops->get_gp_seq();
(gdb) bt
#0 0xffffffff8111160b in rcu_torture_one_read (
trsp=trsp@entry=0xffffc900004abe90, myid=myid@entry=4)
at kernel/rcu/rcutorture.c:2003
#1 0xffffffff81111bef in rcu_torture_reader (arg=0x4 <fixed_percpu_data+4>)
at kernel/rcu/rcutorture.c:2097
#2 0xffffffff810af3e0 in kthread (_create=0xffff8880047aa480)
at kernel/kthread.c:388
#3 0xffffffff8103af1f in ret_from_fork (prev=<optimized out>,
regs=0xffffc900004abf58, fn=0xffffffff810af300 <kthread>,
fn_arg=0xffff8880047aa480) at arch/x86/kernel/process.c:147
#4 0xffffffff8100247a in ret_from_fork_asm () at arch/x86/entry/entry_64.S:242
#5 0x0000000000000000 in ?? ()
So the system really did boot and is running just fine. It is just that
there is no console output. Details, details!
Is there anything I can do to some combination of workqueues and printk
to help debug this? Or that I can do to anything else, as I am not
feeling all that picky. ;-)
Thanx, Paul
[1] The dual-socket system is an 80-hardware-thread (20 cores per socket)
system with model name Intel(R) Xeon(R) Gold 6138 CPU @ 2.00GHz.
I get the same results when using either of these compilers:
gcc version 8.5.0 20210514 (Red Hat 8.5.0-21) (GCC)
gcc version 11.4.1 20230605 (Red Hat 11.4.1-2) (GCC)
[2] My laptop is a 16-hardware-thread (8 cores) single-socket system with
model name "Intel(R) Core(TM) i9-10885H CPU @ 2.40GHz" and
gcc version 11.4.0 (Ubuntu 11.4.0-1ubuntu1~22.04).
On 2024-02-02, "Paul E. McKenney" <[email protected]> wrote:
> So the system really did boot and is running just fine. It is just that
> there is no console output. Details, details!
>
> Is there anything I can do to some combination of workqueues and printk
> to help debug this?
The printk ringbuffer contents would certainly be interesting.
If you build the GDB scripts (CONFIG_GDB_SCRIPTS) then you will have:
(gdb) lx-dmesg
As an alternative, you could copy the contents of
Documentation/admin-guide/kdump/gdbmacros.txt into your .gdbinit and
then will have:
(gdb) dmesg
There may be some hints in the kernel log as to why there is no console
output.
John
On Fri 2024-02-02 05:04:45, Paul E. McKenney wrote:
> Hello!
>
> Starting with next-20240130 (and perhaps a bit earlier), rcutorture gets
> what initially looked like early-boot hangs, but only when running on
> dual-socket x86 systems [1], as it it works just fine on my x86 laptop [2].
> But when running on dual-socket systems, this happens all the time,
> perhaps because rcutorture works hard to split each guest OS across a
> socket boundary.
>
> This is the reproducer:
>
> tools/testing/selftests/rcutorture/bin/kvm.sh --allcpus --duration 1m --configs "10*TREE01" --trust-make
>
> By "looked like early-boot hangs" I mean that qemu was quite happy,
> but there was absolutely no console output.
>
> Bisection identified this commit:
>
> 5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
>
> Reverting this commit made the problem go away. Except that it is really
> hard to imagine this commit having any effect whatsoever on early boot
> execution. Of course, this might be a failure of imagination on my part,
> so I enlisted the aid of gdb:
>
> tools/testing/selftests/rcutorture/bin/kvm.sh --allcpus --duration 1m --configs "TREE01" --trust-make --gdb
>
> After following the resulting gdb startup instructions and waiting for
> about ten seconds, I hit control-C on the gdb window and then:
>
> (gdb) bt
> #0 default_idle () at arch/x86/kernel/process.c:743
> #1 0xffffffff81e94d34 in default_idle_call () at kernel/sched/idle.c:97
> #2 0xffffffff810d746d in cpuidle_idle_call () at kernel/sched/idle.c:170
> #3 do_idle () at kernel/sched/idle.c:312
> #4 0xffffffff810d76a4 in cpu_startup_entry (state=state@entry=CPUHP_ONLINE)
> at kernel/sched/idle.c:410
> #5 0xffffffff81e95417 in rest_init () at init/main.c:730
> #6 0xffffffff8329adf2 in start_kernel () at init/main.c:1067
> #7 0xffffffff832a5038 in x86_64_start_reservations (
> real_mode_data=real_mode_data@entry=0x13d50 <exception_stacks+32080> <error: Cannot access memory at address 0x13d50>) at arch/x86/kernel/head64.c:555
> #8 0xffffffff832a513c in x86_64_start_kernel (
> real_mode_data=0x13d50 <exception_stacks+32080> <error: Cannot access memory at address 0x13d50>) at arch/x86/kernel/head64.c:536
> #9 0xffffffff810001d2 in secondary_startup_64 ()
> at arch/x86/kernel/head_64.S:461
> #10 0x0000000000000000 in ?? ()
> (gdb) print jiffies
> $1 = 4294676330
> (gdb) print system_state
> $2 = SYSTEM_RUNNING
>
> In other words, the system really has booted, and at least one CPU is
> happily idling in the idle loop. And another CPU is (maybe not quite
> so happily) running rcutorture:
>
> (gdb) thread 6
> [Switching to thread 6 (Thread 1.6)]
> #0 0xffffffff8111160b in rcu_torture_one_read (
> trsp=trsp@entry=0xffffc900004abe90, myid=myid@entry=4)
> at kernel/rcu/rcutorture.c:2003
> 2003 completed = cur_ops->get_gp_seq();
> (gdb) bt
> #0 0xffffffff8111160b in rcu_torture_one_read (
> trsp=trsp@entry=0xffffc900004abe90, myid=myid@entry=4)
> at kernel/rcu/rcutorture.c:2003
> #1 0xffffffff81111bef in rcu_torture_reader (arg=0x4 <fixed_percpu_data+4>)
> at kernel/rcu/rcutorture.c:2097
> #2 0xffffffff810af3e0 in kthread (_create=0xffff8880047aa480)
> at kernel/kthread.c:388
> #3 0xffffffff8103af1f in ret_from_fork (prev=<optimized out>,
> regs=0xffffc900004abf58, fn=0xffffffff810af300 <kthread>,
> fn_arg=0xffff8880047aa480) at arch/x86/kernel/process.c:147
> #4 0xffffffff8100247a in ret_from_fork_asm () at arch/x86/entry/entry_64.S:242
> #5 0x0000000000000000 in ?? ()
>
> So the system really did boot and is running just fine. It is just that
> there is no console output. Details, details!
>
> Is there anything I can do to some combination of workqueues and printk
> to help debug this? Or that I can do to anything else, as I am not
> feeling all that picky. ;-)
It really sounds strange. Console drivers should not use workqueues
at least for console->write() callbacks. The main reason is that
workqueues do not work in panic(). But it might bring many problems
even when the system is running "normally"
You wrote above that there was absolutely no console output so the problem
was from the very beginning.
I looks like that the consoles get blocked either during registration
of the first console or when trying to flush the first message.
Consoles, except for early consoles, are registered by
console_initcall(). And init calls are proceed when the workqueues
subsystem is already initialized. So, workqueues might
somehow affect console driver initialization and registration.
My first though was that the workqueues change might somehow
block synchronize_srcu() which is used when updating console_list.
But it not called during console registration. It is called only
during suspend, resume, and console unregistration. So, it should
not block the first boot messages.
My current theory is that the change in workqueues might somehow
block a console driver initialization. I think that some console
drivers might use workqueues for some tasks even though they
could not use them in the write() callback.
Could you please provide console log when the problematic patch
is disabled? I wonder what consoles drivers are registered and when.
Just to be sure. Does the rcu torture configuration modify the
behavior of srcu_read_lock_nmisafe() which is used by
console_srcu_read_lock()?
Best Regards,
Petr
Am 2/2/2024 um 2:04 PM schrieb Paul E. McKenney:
> Hello!
>
> Starting with next-20240130 (and perhaps a bit earlier), rcutorture gets
> what initially looked like early-boot hangs, but only when running on
> dual-socket x86 systems [1], as it it works just fine on my x86 laptop [2].
> But when running on dual-socket systems, this happens all the time,
> perhaps because rcutorture works hard to split each guest OS across a
> socket boundary.
>
> This is the reproducer:
>
> tools/testing/selftests/rcutorture/bin/kvm.sh --allcpus --duration 1m --configs "10*TREE01" --trust-make
>
> By "looked like early-boot hangs" I mean that qemu was quite happy,
> but there was absolutely no console output.
>
> Bisection identified this commit:
>
> 5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
>
> Reverting this commit made the problem go away. Except that it is really
> hard to imagine this commit having any effect whatsoever on early boot
> execution. Of course, this might be a failure of imagination on my part,
> so I enlisted the aid of gdb:
>
> tools/testing/selftests/rcutorture/bin/kvm.sh --allcpus --duration 1m --configs "TREE01" --trust-make --gdb
>
> After following the resulting gdb startup instructions and waiting for
> about ten seconds, I hit control-C on the gdb window and then:
>
> (gdb) bt
> #0 default_idle () at arch/x86/kernel/process.c:743
> #1 0xffffffff81e94d34 in default_idle_call () at kernel/sched/idle.c:97
> #2 0xffffffff810d746d in cpuidle_idle_call () at kernel/sched/idle.c:170
> #3 do_idle () at kernel/sched/idle.c:312
> #4 0xffffffff810d76a4 in cpu_startup_entry (state=state@entry=CPUHP_ONLINE)
> at kernel/sched/idle.c:410
> #5 0xffffffff81e95417 in rest_init () at init/main.c:730
> #6 0xffffffff8329adf2 in start_kernel () at init/main.c:1067
> #7 0xffffffff832a5038 in x86_64_start_reservations (
> real_mode_data=real_mode_data@entry=0x13d50 <exception_stacks+32080> <error: Cannot access memory at address 0x13d50>) at arch/x86/kernel/head64.c:555
> #8 0xffffffff832a513c in x86_64_start_kernel (
> real_mode_data=0x13d50 <exception_stacks+32080> <error: Cannot access memory at address 0x13d50>) at arch/x86/kernel/head64.c:536
> #9 0xffffffff810001d2 in secondary_startup_64 ()
> at arch/x86/kernel/head_64.S:461
> #10 0x0000000000000000 in ?? ()
> (gdb) print jiffies
> $1 = 4294676330
> (gdb) print system_state
> $2 = SYSTEM_RUNNING
>
> In other words, the system really has booted, and at least one CPU is
> happily idling in the idle loop. And another CPU is (maybe not quite
> so happily) running rcutorture:
>
> (gdb) thread 6
> [Switching to thread 6 (Thread 1.6)]
> #0 0xffffffff8111160b in rcu_torture_one_read (
> trsp=trsp@entry=0xffffc900004abe90, myid=myid@entry=4)
> at kernel/rcu/rcutorture.c:2003
> 2003 completed = cur_ops->get_gp_seq();
> (gdb) bt
> #0 0xffffffff8111160b in rcu_torture_one_read (
> trsp=trsp@entry=0xffffc900004abe90, myid=myid@entry=4)
> at kernel/rcu/rcutorture.c:2003
> #1 0xffffffff81111bef in rcu_torture_reader (arg=0x4 <fixed_percpu_data+4>)
> at kernel/rcu/rcutorture.c:2097
> #2 0xffffffff810af3e0 in kthread (_create=0xffff8880047aa480)
> at kernel/kthread.c:388
> #3 0xffffffff8103af1f in ret_from_fork (prev=<optimized out>,
> regs=0xffffc900004abf58, fn=0xffffffff810af300 <kthread>,
> fn_arg=0xffff8880047aa480) at arch/x86/kernel/process.c:147
> #4 0xffffffff8100247a in ret_from_fork_asm () at arch/x86/entry/entry_64.S:242
> #5 0x0000000000000000 in ?? ()
>
> So the system really did boot and is running just fine. It is just that
> there is no console output. Details, details!
>
> Is there anything I can do to some combination of workqueues and printk
> to help debug this? Or that I can do to anything else, as I am not
> feeling all that picky. ;-)
Just to exclude one source of troubles, have you tried turning all
atomics into full barriers and seen if the issue still reproduces?
jonas
>
> Thanx, Paul
>
> [1] The dual-socket system is an 80-hardware-thread (20 cores per socket)
> system with model name Intel(R) Xeon(R) Gold 6138 CPU @ 2.00GHz.
> I get the same results when using either of these compilers:
> gcc version 8.5.0 20210514 (Red Hat 8.5.0-21) (GCC)
> gcc version 11.4.1 20230605 (Red Hat 11.4.1-2) (GCC)
>
> [2] My laptop is a 16-hardware-thread (8 cores) single-socket system with
> model name "Intel(R) Core(TM) i9-10885H CPU @ 2.40GHz" and
> gcc version 11.4.0 (Ubuntu 11.4.0-1ubuntu1~22.04).
On Fri, Feb 02, 2024 at 03:18:48PM +0106, John Ogness wrote:
> On 2024-02-02, "Paul E. McKenney" <[email protected]> wrote:
> > So the system really did boot and is running just fine. It is just that
> > there is no console output. Details, details!
> >
> > Is there anything I can do to some combination of workqueues and printk
> > to help debug this?
>
> The printk ringbuffer contents would certainly be interesting.
>
> If you build the GDB scripts (CONFIG_GDB_SCRIPTS) then you will have:
>
> (gdb) lx-dmesg
This says no such command even though I do have CONFIG_GDB_SCRIPTS=y
in my .config.
> As an alternative, you could copy the contents of
> Documentation/admin-guide/kdump/gdbmacros.txt into your .gdbinit and
> then will have:
>
> (gdb) dmesg
This one hangs.
> There may be some hints in the kernel log as to why there is no console
> output.
On the other hand, next-20240202 doesn't show the problem. No idea
what might have changed. :-/
Thanx, Paul
On Fri, Feb 02, 2024 at 03:35:26PM +0100, Petr Mladek wrote:
> On Fri 2024-02-02 05:04:45, Paul E. McKenney wrote:
> > Hello!
> >
> > Starting with next-20240130 (and perhaps a bit earlier), rcutorture gets
> > what initially looked like early-boot hangs, but only when running on
> > dual-socket x86 systems [1], as it it works just fine on my x86 laptop [2].
> > But when running on dual-socket systems, this happens all the time,
> > perhaps because rcutorture works hard to split each guest OS across a
> > socket boundary.
> >
> > This is the reproducer:
> >
> > tools/testing/selftests/rcutorture/bin/kvm.sh --allcpus --duration 1m --configs "10*TREE01" --trust-make
> >
> > By "looked like early-boot hangs" I mean that qemu was quite happy,
> > but there was absolutely no console output.
> >
> > Bisection identified this commit:
> >
> > 5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
> >
> > Reverting this commit made the problem go away. Except that it is really
> > hard to imagine this commit having any effect whatsoever on early boot
> > execution. Of course, this might be a failure of imagination on my part,
> > so I enlisted the aid of gdb:
> >
> > tools/testing/selftests/rcutorture/bin/kvm.sh --allcpus --duration 1m --configs "TREE01" --trust-make --gdb
> >
> > After following the resulting gdb startup instructions and waiting for
> > about ten seconds, I hit control-C on the gdb window and then:
> >
> > (gdb) bt
> > #0 default_idle () at arch/x86/kernel/process.c:743
> > #1 0xffffffff81e94d34 in default_idle_call () at kernel/sched/idle.c:97
> > #2 0xffffffff810d746d in cpuidle_idle_call () at kernel/sched/idle.c:170
> > #3 do_idle () at kernel/sched/idle.c:312
> > #4 0xffffffff810d76a4 in cpu_startup_entry (state=state@entry=CPUHP_ONLINE)
> > at kernel/sched/idle.c:410
> > #5 0xffffffff81e95417 in rest_init () at init/main.c:730
> > #6 0xffffffff8329adf2 in start_kernel () at init/main.c:1067
> > #7 0xffffffff832a5038 in x86_64_start_reservations (
> > real_mode_data=real_mode_data@entry=0x13d50 <exception_stacks+32080> <error: Cannot access memory at address 0x13d50>) at arch/x86/kernel/head64.c:555
> > #8 0xffffffff832a513c in x86_64_start_kernel (
> > real_mode_data=0x13d50 <exception_stacks+32080> <error: Cannot access memory at address 0x13d50>) at arch/x86/kernel/head64.c:536
> > #9 0xffffffff810001d2 in secondary_startup_64 ()
> > at arch/x86/kernel/head_64.S:461
> > #10 0x0000000000000000 in ?? ()
> > (gdb) print jiffies
> > $1 = 4294676330
> > (gdb) print system_state
> > $2 = SYSTEM_RUNNING
> >
> > In other words, the system really has booted, and at least one CPU is
> > happily idling in the idle loop. And another CPU is (maybe not quite
> > so happily) running rcutorture:
> >
> > (gdb) thread 6
> > [Switching to thread 6 (Thread 1.6)]
> > #0 0xffffffff8111160b in rcu_torture_one_read (
> > trsp=trsp@entry=0xffffc900004abe90, myid=myid@entry=4)
> > at kernel/rcu/rcutorture.c:2003
> > 2003 completed = cur_ops->get_gp_seq();
> > (gdb) bt
> > #0 0xffffffff8111160b in rcu_torture_one_read (
> > trsp=trsp@entry=0xffffc900004abe90, myid=myid@entry=4)
> > at kernel/rcu/rcutorture.c:2003
> > #1 0xffffffff81111bef in rcu_torture_reader (arg=0x4 <fixed_percpu_data+4>)
> > at kernel/rcu/rcutorture.c:2097
> > #2 0xffffffff810af3e0 in kthread (_create=0xffff8880047aa480)
> > at kernel/kthread.c:388
> > #3 0xffffffff8103af1f in ret_from_fork (prev=<optimized out>,
> > regs=0xffffc900004abf58, fn=0xffffffff810af300 <kthread>,
> > fn_arg=0xffff8880047aa480) at arch/x86/kernel/process.c:147
> > #4 0xffffffff8100247a in ret_from_fork_asm () at arch/x86/entry/entry_64.S:242
> > #5 0x0000000000000000 in ?? ()
> >
> > So the system really did boot and is running just fine. It is just that
> > there is no console output. Details, details!
> >
> > Is there anything I can do to some combination of workqueues and printk
> > to help debug this? Or that I can do to anything else, as I am not
> > feeling all that picky. ;-)
>
> It really sounds strange. Console drivers should not use workqueues
> at least for console->write() callbacks. The main reason is that
> workqueues do not work in panic(). But it might bring many problems
> even when the system is running "normally"
>
> You wrote above that there was absolutely no console output so the problem
> was from the very beginning.
>
> I looks like that the consoles get blocked either during registration
> of the first console or when trying to flush the first message.
>
> Consoles, except for early consoles, are registered by
> console_initcall(). And init calls are proceed when the workqueues
> subsystem is already initialized. So, workqueues might
> somehow affect console driver initialization and registration.
>
> My first though was that the workqueues change might somehow
> block synchronize_srcu() which is used when updating console_list.
> But it not called during console registration. It is called only
> during suspend, resume, and console unregistration. So, it should
> not block the first boot messages.
>
> My current theory is that the change in workqueues might somehow
> block a console driver initialization. I think that some console
> drivers might use workqueues for some tasks even though they
> could not use them in the write() callback.
>
> Could you please provide console log when the problematic patch
> is disabled? I wonder what consoles drivers are registered and when.
Please see below. But again, next-20240202 no longer shows this behavior.
Perhaps both workqueues and printk were innocent bystanders? :-/
> Just to be sure. Does the rcu torture configuration modify the
> behavior of srcu_read_lock_nmisafe() which is used by
> console_srcu_read_lock()?
No, and in all cases this was running in a guest OS.
Maybe something will jump out from the console log, but otherwise, I am
tempted to assume that workqueues and printk were innocent bystanders
for some other bug that got fixed.
Thanx, Paul
------------------------------------------------------------------------
Or access this URL: https://drive.google.com/file/d/1rOtr3UP3oI6thYKyGOv7YGJiHkRcgJt9/view?usp=sharing
------------------------------------------------------------------------
[ 0.000000] Linux version 6.8.0-rc2-next-20240131-00001-ge4a8ad1d3e46 ([email protected]) (gcc (GCC) 8.5.0 20210514 (Red Hat 8.5.0-21), GNU ld version 2.30-123.el8) #40380 SMP PREEMPT_DYNAMIC Thu Feb 1 04:46:52 PST 2024
[ 0.000000] Command line: debug_boot_weak_hash panic=-1 selinux=0 initcall_debug debug console=ttyS0 nokaslr rcutorture.onoff_interval=1000 rcutorture.onoff_holdoff=30 rcutorture.n_barrier_cbs=4 rcutorture.stat_interval=15 rcutorture.shutdown_secs=60 rcutorture.test_no_idle_hz=1 rcutorture.verbose=1 maxcpus=8 nr_cpus=43 rcutree.gp_preinit_delay=3 rcutree.gp_init_delay=3 rcutree.gp_cleanup_delay=3 rcu_nocbs=0-1,3-7 rcutorture.nocbs_nthreads=8 rcutorture.nocbs_toggle=1000 rcutorture.fwd_progress=0
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffddfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001ffde000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] debug_boot_weak_hash enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000001] kvm-clock: using sched offset of 390900481 cycles
[ 0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000006] tsc: Detected 1995.308 MHz processor
[ 0.000955] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000958] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000964] last_pfn = 0x1ffde max_arch_pfn = 0x400000000
[ 0.001008] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[ 0.001013] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.018200] ACPI: Early table checksum verification disabled
[ 0.018204] ACPI: RSDP 0x00000000000F5B50 000014 (v00 BOCHS )
[ 0.018215] ACPI: RSDT 0x000000001FFE2412 000034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.018222] ACPI: FACP 0x000000001FFE20E2 0000F4 (v03 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.018232] ACPI: DSDT 0x000000001FFDF400 002CE2 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
[ 0.018237] ACPI: FACS 0x000000001FFDF3C0 000040
[ 0.018241] ACPI: APIC 0x000000001FFE21D6 0001C8 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.018245] ACPI: HPET 0x000000001FFE239E 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.018250] ACPI: MCFG 0x000000001FFE23D6 00003C (v01 BOCHS BXPCMCFG 00000001 BXPC 00000001)
[ 0.018254] ACPI: Reserving FACP table memory at [mem 0x1ffe20e2-0x1ffe21d5]
[ 0.018256] ACPI: Reserving DSDT table memory at [mem 0x1ffdf400-0x1ffe20e1]
[ 0.018258] ACPI: Reserving FACS table memory at [mem 0x1ffdf3c0-0x1ffdf3ff]
[ 0.018260] ACPI: Reserving APIC table memory at [mem 0x1ffe21d6-0x1ffe239d]
[ 0.018261] ACPI: Reserving HPET table memory at [mem 0x1ffe239e-0x1ffe23d5]
[ 0.018263] ACPI: Reserving MCFG table memory at [mem 0x1ffe23d6-0x1ffe2411]
[ 0.018760] No NUMA configuration found
[ 0.018763] Faking a node at [mem 0x0000000000000000-0x000000001ffddfff]
[ 0.018775] NODE_DATA(0) allocated [mem 0x1ffbc000-0x1ffddfff]
[ 0.018905] Zone ranges:
[ 0.018907] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.018910] DMA32 [mem 0x0000000001000000-0x000000001ffddfff]
[ 0.018912] Normal empty
[ 0.018914] Movable zone start for each node
[ 0.018917] Early memory node ranges
[ 0.018917] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.018919] node 0: [mem 0x0000000000100000-0x000000001ffddfff]
[ 0.018922] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffddfff]
[ 0.019435] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.019464] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.021948] On node 0, zone DMA32: 34 pages in unavailable ranges
[ 0.022471] ACPI: PM-Timer IO Port: 0x608
[ 0.022499] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.022549] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.022555] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.022557] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.022559] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.022560] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.022561] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.022567] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.022568] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.022573] smpboot: Allowing 43 CPUs, 0 hotplug CPUs
[ 0.022592] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write()
[ 0.022623] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.022625] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.022627] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.022628] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.022630] [mem 0x20000000-0xafffffff] available for PCI devices
[ 0.022632] Booting paravirtualized kernel on KVM
[ 0.022634] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.030062] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:43 nr_cpu_ids:43 nr_node_ids:1
[ 0.035018] percpu: Embedded 56 pages/cpu s189352 r8192 d31832 u262144
[ 0.035034] pcpu-alloc: s189352 r8192 d31832 u262144 alloc=1*2097152
[ 0.035038] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.035050] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
[ 0.035064] pcpu-alloc: [0] 32 33 34 35 36 37 38 39 [0] 40 41 42 -- -- -- -- --
[ 0.035109] Kernel command line: debug_boot_weak_hash panic=-1 selinux=0 initcall_debug debug console=ttyS0 nokaslr rcutorture.onoff_interval=1000 rcutorture.onoff_holdoff=30 rcutorture.n_barrier_cbs=4 rcutorture.stat_interval=15 rcutorture.shutdown_secs=60 rcutorture.test_no_idle_hz=1 rcutorture.verbose=1 maxcpus=8 nr_cpus=43 rcutree.gp_preinit_delay=3 rcutree.gp_init_delay=3 rcutree.gp_cleanup_delay=3 rcu_nocbs=0-1,3-7 rcutorture.nocbs_nthreads=8 rcutorture.nocbs_toggle=1000 rcutorture.fwd_progress=0
[ 0.035350] Unknown kernel command line parameters "nokaslr", will be passed to user space.
[ 0.035358] printk: log_buf_len individual max cpu contribution: 4096 bytes
[ 0.035360] printk: log_buf_len total cpu_extra contributions: 172032 bytes
[ 0.035372] printk: log_buf_len min size: 262144 bytes
[ 0.036709] printk: log_buf_len: 524288 bytes
[ 0.036710] printk: early log buf free: 255216(97%)
[ 0.036991] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.037130] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.037838] Fallback order for Node 0: 0
[ 0.037845] Built 1 zonelists, mobility grouping on. Total pages: 128734
[ 0.037847] Policy zone: DMA32
[ 0.037849] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.038987] Memory: 460744K/523760K available (18432K kernel code, 3201K rwdata, 6908K rodata, 3396K init, 2268K bss, 62760K reserved, 0K cma-reserved)
[ 0.039120] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=43, Nodes=1
[ 0.039158] Kernel/User page tables isolation: enabled
[ 0.039286] Dynamic Preempt: full
[ 0.039751] rcu: Preemptible hierarchical RCU implementation.
[ 0.039752] rcu: RCU event tracing is enabled.
[ 0.039752] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=43.
[ 0.039753] rcu: RCU debug GP pre-init slowdown 3 jiffies.
[ 0.039754] rcu: RCU debug GP init slowdown 3 jiffies.
[ 0.039755] rcu: RCU debug GP cleanup slowdown 3 jiffies.
[ 0.039755] Trampoline variant of Tasks RCU enabled.
[ 0.039756] Rude variant of Tasks RCU enabled.
[ 0.039757] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.039758] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=43
[ 0.041336] NR_IRQS: 524544, nr_irqs: 768, preallocated irqs: 16
[ 0.041591] rcu: Offload RCU callbacks from CPUs: 0-1,3-7.
[ 0.041597] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.041678] calling con_init+0x0/0x250 @ 0
[ 0.047962] Console: colour VGA+ 80x25
[ 0.047964] initcall con_init+0x0/0x250 returned 0 after 0 usecs
[ 0.047967] calling hvc_console_init+0x0/0x20 @ 0
[ 0.047970] initcall hvc_console_init+0x0/0x20 returned 0 after 0 usecs
[ 0.047972] calling univ8250_console_init+0x0/0x40 @ 0
[ 0.048008] printk: legacy console [ttyS0] enabled
[ 0.155254] initcall univ8250_console_init+0x0/0x40 returned 0 after 0 usecs
[ 0.156241] ACPI: Core revision 20230628
[ 0.157272] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.158526] APIC: Switch to symmetric I/O mode setup
[ 0.159167] APIC: Switched APIC routing to: physical flat
[ 0.160962] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.161914] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3985bbcfaa7, max_idle_ns: 881590561327 ns
[ 0.163594] Calibrating delay loop (skipped) preset value.. 3990.61 BogoMIPS (lpj=1995308)
[ 0.164731] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.165592] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.166594] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.167593] Spectre V2 : Mitigation: Retpolines
[ 0.168591] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.169592] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.170591] Speculative Store Bypass: Vulnerable
[ 0.171593] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.172591] MMIO Stale Data: Unknown: No mitigations
[ 0.173593] x86/fpu: x87 FPU will use FXSAVE
[ 0.192285] Freeing SMP alternatives memory: 48K
[ 0.192621] pid_max: default: 44032 minimum: 344
[ 0.193684] LSM: initializing lsm=capability,integrity
[ 0.194655] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.195592] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.299481] smpboot: CPU0: Intel Common KVM processor (family: 0xf, model: 0x6, stepping: 0x1)
[ 0.299762] RCU Tasks: Setting shift to 6 and lim to 1 rcu_task_cb_adjust=1.
[ 0.300610] RCU Tasks Rude: Setting shift to 6 and lim to 1 rcu_task_cb_adjust=1.
[ 0.301611] calling init_hw_perf_events+0x0/0x700 @ 1
[ 0.302480] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
[ 0.302591] initcall init_hw_perf_events+0x0/0x700 returned 0 after 1000 usecs
[ 0.303591] calling do_init_real_mode+0x0/0x20 @ 1
[ 0.304746] initcall do_init_real_mode+0x0/0x20 returned 0 after 0 usecs
[ 0.305592] calling init_sigframe_size+0x0/0x40 @ 1
[ 0.306591] signal: max sigframe size: 1440
[ 0.307194] initcall init_sigframe_size+0x0/0x40 returned 0 after 0 usecs
[ 0.307591] calling trace_init_perf_perm_irq_work_exit+0x0/0x20 @ 1
[ 0.308591] initcall trace_init_perf_perm_irq_work_exit+0x0/0x20 returned 0 after 0 usecs
[ 0.309592] calling cache_ap_register+0x0/0x60 @ 1
[ 0.310593] initcall cache_ap_register+0x0/0x60 returned 0 after 0 usecs
[ 0.311576] calling bp_init_aperfmperf+0x0/0x3a0 @ 1
[ 0.311592] initcall bp_init_aperfmperf+0x0/0x3a0 returned 0 after 0 usecs
[ 0.312592] calling save_builtin_microcode+0x0/0xd0 @ 1
[ 0.313592] initcall save_builtin_microcode+0x0/0xd0 returned 0 after 0 usecs
[ 0.314591] calling save_microcode_in_initrd+0x0/0x130 @ 1
[ 0.315593] initcall save_microcode_in_initrd+0x0/0x130 returned 0 after 0 usecs
[ 0.316592] calling smp_init_primary_thread_mask+0x0/0x50 @ 1
[ 0.317592] initcall smp_init_primary_thread_mask+0x0/0x50 returned 0 after 0 usecs
[ 0.318592] calling register_nmi_cpu_backtrace_handler+0x0/0x20 @ 1
[ 0.319592] initcall register_nmi_cpu_backtrace_handler+0x0/0x20 returned 0 after 0 usecs
[ 0.320593] calling kvm_setup_vsyscall_timeinfo+0x0/0x120 @ 1
[ 0.321592] initcall kvm_setup_vsyscall_timeinfo+0x0/0x120 returned 0 after 0 usecs
[ 0.322591] calling spawn_ksoftirqd+0x0/0x40 @ 1
[ 0.323625] initcall spawn_ksoftirqd+0x0/0x40 returned 0 after 0 usecs
[ 0.324591] calling init_signal_sysctls+0x0/0x30 @ 1
[ 0.325593] initcall init_signal_sysctls+0x0/0x30 returned 0 after 0 usecs
[ 0.326591] calling init_umh_sysctls+0x0/0x30 @ 1
[ 0.327325] initcall init_umh_sysctls+0x0/0x30 returned 0 after 0 usecs
[ 0.327591] calling migration_init+0x0/0x40 @ 1
[ 0.328591] initcall migration_init+0x0/0x40 returned 0 after 0 usecs
[ 0.329591] calling srcu_bootup_announce+0x0/0x80 @ 1
[ 0.330591] rcu: Hierarchical SRCU implementation.
[ 0.331591] rcu: Max phase no-delay instances is 400.
[ 0.332374] initcall srcu_bootup_announce+0x0/0x80 returned 0 after 1000 usecs
[ 0.332591] calling rcu_spawn_gp_kthread+0x0/0x240 @ 1
[ 0.333630] initcall rcu_spawn_gp_kthread+0x0/0x240 returned 0 after 1000 usecs
[ 0.334599] calling check_cpu_stall_init+0x0/0x20 @ 1
[ 0.335333] initcall check_cpu_stall_init+0x0/0x20 returned 0 after 0 usecs
[ 0.335591] calling rcu_sysrq_init+0x0/0x30 @ 1
[ 0.336591] initcall rcu_sysrq_init+0x0/0x30 returned 0 after 0 usecs
[ 0.337592] calling trace_init_flags_sys_enter+0x0/0x20 @ 1
[ 0.338591] initcall trace_init_flags_sys_enter+0x0/0x20 returned 0 after 0 usecs
[ 0.339591] calling trace_init_flags_sys_exit+0x0/0x20 @ 1
[ 0.340591] initcall trace_init_flags_sys_exit+0x0/0x20 returned 0 after 0 usecs
[ 0.341591] calling insert_crashkernel_resources+0x0/0x70 @ 1
[ 0.342592] initcall insert_crashkernel_resources+0x0/0x70 returned 0 after 0 usecs
[ 0.343591] calling cpu_stop_init+0x0/0xa0 @ 1
[ 0.344298] initcall cpu_stop_init+0x0/0xa0 returned 0 after 0 usecs
[ 0.344591] calling init_kprobes+0x0/0x1d0 @ 1
[ 0.345688] initcall init_kprobes+0x0/0x1d0 returned 0 after 0 usecs
[ 0.346591] calling init_trace_printk+0x0/0x10 @ 1
[ 0.347592] initcall init_trace_printk+0x0/0x10 returned 0 after 0 usecs
[ 0.348591] calling event_trace_enable_again+0x0/0x60 @ 1
[ 0.349592] initcall event_trace_enable_again+0x0/0x60 returned 0 after 0 usecs
[ 0.350591] calling irq_work_init_threads+0x0/0x10 @ 1
[ 0.351591] initcall irq_work_init_threads+0x0/0x10 returned 0 after 0 usecs
[ 0.352591] calling static_call_init+0x0/0xd0 @ 1
[ 0.353591] initcall static_call_init+0x0/0xd0 returned 0 after 0 usecs
[ 0.354591] calling jump_label_init_module+0x0/0x10 @ 1
[ 0.355350] initcall jump_label_init_module+0x0/0x10 returned 0 after 0 usecs
[ 0.355591] calling init_zero_pfn+0x0/0x40 @ 1
[ 0.356591] initcall init_zero_pfn+0x0/0x40 returned 0 after 0 usecs
[ 0.357591] calling init_fs_inode_sysctls+0x0/0x30 @ 1
[ 0.358592] initcall init_fs_inode_sysctls+0x0/0x30 returned 0 after 0 usecs
[ 0.359591] calling init_fs_locks_sysctls+0x0/0x30 @ 1
[ 0.360592] initcall init_fs_locks_sysctls+0x0/0x30 returned 0 after 0 usecs
[ 0.361591] calling init_fs_sysctls+0x0/0x30 @ 1
[ 0.362592] initcall init_fs_sysctls+0x0/0x30 returned 0 after 0 usecs
[ 0.363591] calling init_security_keys_sysctls+0x0/0x30 @ 1
[ 0.364594] initcall init_security_keys_sysctls+0x0/0x30 returned 0 after 0 usecs
[ 0.365591] calling efi_memreserve_root_init+0x0/0x30 @ 1
[ 0.366592] initcall efi_memreserve_root_init+0x0/0x30 returned 0 after 0 usecs
[ 0.367591] calling efi_earlycon_remap_fb+0x0/0x70 @ 1
[ 0.368592] initcall efi_earlycon_remap_fb+0x0/0x70 returned 0 after 0 usecs
[ 0.370623] smp: Bringing up secondary CPUs ...
[ 0.371522] smpboot: x86: Booting SMP configuration:
[ 0.371599] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.119986] smpboot: CPU 1 Converting physical 0 to logical die 1
[ 0.119986] smpboot: CPU 2 Converting physical 0 to logical die 2
[ 0.119986] smpboot: CPU 3 Converting physical 0 to logical die 3
[ 0.119986] smpboot: CPU 4 Converting physical 0 to logical die 4
[ 0.119986] smpboot: CPU 5 Converting physical 0 to logical die 5
[ 0.119986] smpboot: CPU 6 Converting physical 0 to logical die 6
[ 0.119986] smpboot: CPU 7 Converting physical 0 to logical die 7
[ 0.467595] smp: Brought up 1 node, 8 CPUs
[ 0.468307] smpboot: Max logical packages: 43
[ 0.468593] smpboot: Total of 8 processors activated (31924.92 BogoMIPS)
[ 0.471686] devtmpfs: initialized
[ 0.473147] calling ipc_ns_init+0x0/0x50 @ 1
[ 0.473595] initcall ipc_ns_init+0x0/0x50 returned 0 after 0 usecs
[ 0.474594] calling init_mmap_min_addr+0x0/0x30 @ 1
[ 0.475595] initcall init_mmap_min_addr+0x0/0x30 returned 0 after 0 usecs
[ 0.476592] calling pci_realloc_setup_params+0x0/0x40 @ 1
[ 0.477592] initcall pci_realloc_setup_params+0x0/0x40 returned 0 after 0 usecs
[ 0.478592] calling inet_frag_wq_init+0x0/0x40 @ 1
[ 0.479607] initcall inet_frag_wq_init+0x0/0x40 returned 0 after 1000 usecs
[ 0.480690] calling e820__register_nvs_regions+0x0/0x60 @ 1
[ 0.481592] initcall e820__register_nvs_regions+0x0/0x60 returned 0 after 0 usecs
[ 0.482592] calling cpufreq_register_tsc_scaling+0x0/0x40 @ 1
[ 0.483601] initcall cpufreq_register_tsc_scaling+0x0/0x40 returned 0 after 0 usecs
[ 0.484592] calling reboot_init+0x0/0x50 @ 1
[ 0.485595] initcall reboot_init+0x0/0x50 returned 0 after 0 usecs
[ 0.486592] calling init_lapic_sysfs+0x0/0x30 @ 1
[ 0.487595] initcall init_lapic_sysfs+0x0/0x30 returned 0 after 0 usecs
[ 0.488592] calling alloc_frozen_cpus+0x0/0x30 @ 1
[ 0.489353] initcall alloc_frozen_cpus+0x0/0x30 returned 0 after 0 usecs
[ 0.489592] calling cpu_hotplug_pm_sync_init+0x0/0x20 @ 1
[ 0.490592] initcall cpu_hotplug_pm_sync_init+0x0/0x20 returned 0 after 0 usecs
[ 0.491594] calling wq_sysfs_init+0x0/0x80 @ 1
[ 0.492607] initcall wq_sysfs_init+0x0/0x80 returned 0 after 0 usecs
[ 0.493592] calling ksysfs_init+0x0/0xc0 @ 1
[ 0.494597] initcall ksysfs_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.495596] calling schedutil_gov_init+0x0/0x10 @ 1
[ 0.496592] initcall schedutil_gov_init+0x0/0x10 returned 0 after 0 usecs
[ 0.497592] calling pm_init+0x0/0x80 @ 1
[ 0.498232] initcall pm_init+0x0/0x80 returned 0 after 0 usecs
[ 0.498591] calling pm_disk_init+0x0/0x20 @ 1
[ 0.499608] initcall pm_disk_init+0x0/0x20 returned 0 after 0 usecs
[ 0.500592] calling swsusp_header_init+0x0/0x30 @ 1
[ 0.501592] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 usecs
[ 0.502592] calling rcu_set_runtime_mode+0x0/0x20 @ 1
[ 0.503601] initcall rcu_set_runtime_mode+0x0/0x20 returned 0 after 0 usecs
[ 0.504592] calling init_jiffies_clocksource+0x0/0x20 @ 1
[ 0.505592] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.506592] initcall init_jiffies_clocksource+0x0/0x20 returned 0 after 1000 usecs
[ 0.507592] calling futex_init+0x0/0xe0 @ 1
[ 0.508595] futex hash table entries: 16384 (order: 8, 1048576 bytes, linear)
[ 0.509679] initcall futex_init+0x0/0xe0 returned 0 after 1000 usecs
[ 0.510593] calling cgroup_wq_init+0x0/0x30 @ 1
[ 0.511606] initcall cgroup_wq_init+0x0/0x30 returned 0 after 0 usecs
[ 0.512592] calling cgroup1_wq_init+0x0/0x30 @ 1
[ 0.513320] initcall cgroup1_wq_init+0x0/0x30 returned 0 after 0 usecs
[ 0.513591] calling trace_events_eprobe_init_early+0x0/0x40 @ 1
[ 0.514592] initcall trace_events_eprobe_init_early+0x0/0x40 returned 0 after 0 usecs
[ 0.515591] calling init_kprobe_trace_early+0x0/0x40 @ 1
[ 0.516411] initcall init_kprobe_trace_early+0x0/0x40 returned 0 after 0 usecs
[ 0.516591] calling fsnotify_init+0x0/0x50 @ 1
[ 0.517610] initcall fsnotify_init+0x0/0x50 returned 0 after 0 usecs
[ 0.518592] calling filelock_init+0x0/0xb0 @ 1
[ 0.519617] initcall filelock_init+0x0/0xb0 returned 0 after 0 usecs
[ 0.520591] calling init_misc_binfmt+0x0/0x50 @ 1
[ 0.521593] initcall init_misc_binfmt+0x0/0x50 returned 0 after 0 usecs
[ 0.522592] calling init_script_binfmt+0x0/0x20 @ 1
[ 0.523344] initcall init_script_binfmt+0x0/0x20 returned 0 after 0 usecs
[ 0.523592] calling init_elf_binfmt+0x0/0x20 @ 1
[ 0.524591] initcall init_elf_binfmt+0x0/0x20 returned 0 after 0 usecs
[ 0.525591] calling init_compat_elf_binfmt+0x0/0x20 @ 1
[ 0.526591] initcall init_compat_elf_binfmt+0x0/0x20 returned 0 after 0 usecs
[ 0.527592] calling debugfs_init+0x0/0x80 @ 1
[ 0.528594] initcall debugfs_init+0x0/0x80 returned 0 after 0 usecs
[ 0.529591] calling tracefs_init+0x0/0x80 @ 1
[ 0.530602] initcall tracefs_init+0x0/0x80 returned 0 after 0 usecs
[ 0.531566] calling virtio_init+0x0/0x30 @ 1
[ 0.531600] initcall virtio_init+0x0/0x30 returned 0 after 0 usecs
[ 0.532592] calling iommu_init+0x0/0x30 @ 1
[ 0.533593] initcall iommu_init+0x0/0x30 returned 0 after 0 usecs
[ 0.534592] calling component_debug_init+0x0/0x20 @ 1
[ 0.535625] initcall component_debug_init+0x0/0x20 returned 0 after 0 usecs
[ 0.536592] calling early_resume_init+0x0/0xe0 @ 1
[ 0.537658] PM: RTC time: 12:50:23, date: 2024-02-01
[ 0.538592] initcall early_resume_init+0x0/0xe0 returned 0 after 1000 usecs
[ 0.539592] calling cpufreq_core_init+0x0/0xa0 @ 1
[ 0.540332] initcall cpufreq_core_init+0x0/0xa0 returned 0 after 0 usecs
[ 0.540591] calling cpufreq_gov_performance_init+0x0/0x10 @ 1
[ 0.541592] initcall cpufreq_gov_performance_init+0x0/0x10 returned 0 after 0 usecs
[ 0.542591] calling cpufreq_gov_userspace_init+0x0/0x10 @ 1
[ 0.543592] initcall cpufreq_gov_userspace_init+0x0/0x10 returned 0 after 0 usecs
[ 0.544592] calling CPU_FREQ_GOV_ONDEMAND_init+0x0/0x10 @ 1
[ 0.545451] initcall CPU_FREQ_GOV_ONDEMAND_init+0x0/0x10 returned 0 after 0 usecs
[ 0.545591] calling cpuidle_init+0x0/0x20 @ 1
[ 0.546343] initcall cpuidle_init+0x0/0x20 returned 0 after 0 usecs
[ 0.546592] calling sock_init+0x0/0xb0 @ 1
[ 0.547806] initcall sock_init+0x0/0xb0 returned 0 after 0 usecs
[ 0.548593] calling net_inuse_init+0x0/0x30 @ 1
[ 0.549599] initcall net_inuse_init+0x0/0x30 returned 0 after 0 usecs
[ 0.550592] calling net_defaults_init+0x0/0x30 @ 1
[ 0.551592] initcall net_defaults_init+0x0/0x30 returned 0 after 0 usecs
[ 0.552592] calling init_default_flow_dissectors+0x0/0x60 @ 1
[ 0.553592] initcall init_default_flow_dissectors+0x0/0x60 returned 0 after 0 usecs
[ 0.554592] calling netpoll_init+0x0/0x30 @ 1
[ 0.555358] initcall netpoll_init+0x0/0x30 returned 0 after 0 usecs
[ 0.555592] calling netlink_proto_init+0x0/0x190 @ 1
[ 0.556644] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.557603] initcall netlink_proto_init+0x0/0x190 returned 0 after 1000 usecs
[ 0.558592] calling genl_init+0x0/0x40 @ 1
[ 0.559597] initcall genl_init+0x0/0x40 returned 0 after 0 usecs
[ 0.560592] calling bsp_pm_check_init+0x0/0x20 @ 1
[ 0.561439] initcall bsp_pm_check_init+0x0/0x20 returned 0 after 0 usecs
[ 0.561705] calling irq_sysfs_init+0x0/0xa0 @ 1
[ 0.562664] initcall irq_sysfs_init+0x0/0xa0 returned 0 after 0 usecs
[ 0.563592] calling audit_init+0x0/0x180 @ 1
[ 0.564368] audit: initializing netlink subsys (disabled)
[ 0.565597] initcall audit_init+0x0/0x180 returned 0 after 2000 usecs
[ 0.565595] audit: type=2000 audit(1706791823.511:1): state=initialized audit_enabled=0 res=1
[ 0.566592] calling release_early_probes+0x0/0x50 @ 1
[ 0.568592] initcall release_early_probes+0x0/0x50 returned 0 after 0 usecs
[ 0.569592] calling bdi_class_init+0x0/0x40 @ 1
[ 0.570602] initcall bdi_class_init+0x0/0x40 returned 0 after 0 usecs
[ 0.571592] calling mm_sysfs_init+0x0/0x30 @ 1
[ 0.572593] initcall mm_sysfs_init+0x0/0x30 returned 0 after 0 usecs
[ 0.573592] calling init_per_zone_wmark_min+0x0/0x30 @ 1
[ 0.574617] initcall init_per_zone_wmark_min+0x0/0x30 returned 0 after 0 usecs
[ 0.575592] calling mpi_init+0x0/0x60 @ 1
[ 0.576593] initcall mpi_init+0x0/0x60 returned 0 after 0 usecs
[ 0.577592] calling pcibus_class_init+0x0/0x10 @ 1
[ 0.578594] initcall pcibus_class_init+0x0/0x10 returned 0 after 0 usecs
[ 0.579592] calling pci_driver_init+0x0/0x30 @ 1
[ 0.580603] initcall pci_driver_init+0x0/0x30 returned 0 after 0 usecs
[ 0.581592] calling backlight_class_init+0x0/0xb0 @ 1
[ 0.582594] initcall backlight_class_init+0x0/0xb0 returned 0 after 0 usecs
[ 0.583592] calling tty_class_init+0x0/0x10 @ 1
[ 0.584594] initcall tty_class_init+0x0/0x10 returned 0 after 0 usecs
[ 0.585592] calling vtconsole_class_init+0x0/0xc0 @ 1
[ 0.586610] initcall vtconsole_class_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.587592] calling iommu_dev_init+0x0/0x10 @ 1
[ 0.588594] initcall iommu_dev_init+0x0/0x10 returned 0 after 0 usecs
[ 0.589592] calling mipi_dsi_bus_init+0x0/0x10 @ 1
[ 0.590444] initcall mipi_dsi_bus_init+0x0/0x10 returned 0 after 0 usecs
[ 0.590592] calling devlink_class_init+0x0/0x50 @ 1
[ 0.591599] initcall devlink_class_init+0x0/0x50 returned 0 after 0 usecs
[ 0.592592] calling software_node_init+0x0/0x30 @ 1
[ 0.593593] initcall software_node_init+0x0/0x30 returned 0 after 0 usecs
[ 0.594592] calling wakeup_sources_debugfs_init+0x0/0x30 @ 1
[ 0.595595] initcall wakeup_sources_debugfs_init+0x0/0x30 returned 0 after 0 usecs
[ 0.596592] calling wakeup_sources_sysfs_init+0x0/0x30 @ 1
[ 0.597597] initcall wakeup_sources_sysfs_init+0x0/0x30 returned 0 after 0 usecs
[ 0.598592] calling regmap_initcall+0x0/0x10 @ 1
[ 0.599594] initcall regmap_initcall+0x0/0x10 returned 0 after 0 usecs
[ 0.600592] calling i2c_init+0x0/0xf0 @ 1
[ 0.601604] initcall i2c_init+0x0/0xf0 returned 0 after 0 usecs
[ 0.602592] calling thermal_init+0x0/0x180 @ 1
[ 0.603376] thermal_sys: Registered thermal governor 'step_wise'
[ 0.603377] thermal_sys: Registered thermal governor 'user_space'
[ 0.603595] initcall thermal_init+0x0/0x180 returned 0 after 1000 usecs
[ 0.605592] calling init_menu+0x0/0x10 @ 1
[ 0.606606] cpuidle: using governor menu
[ 0.607592] initcall init_menu+0x0/0x10 returned 0 after 1000 usecs
[ 0.608592] calling init_haltpoll+0x0/0x20 @ 1
[ 0.609307] initcall init_haltpoll+0x0/0x20 returned 0 after 0 usecs
[ 0.609592] calling pcc_init+0x0/0x60 @ 1
[ 0.610593] initcall pcc_init+0x0/0x60 returned -19 after 0 usecs
[ 0.611592] calling amd_postcore_init+0x0/0x130 @ 1
[ 0.612592] initcall amd_postcore_init+0x0/0x130 returned 0 after 0 usecs
[ 0.613592] calling kobject_uevent_init+0x0/0x10 @ 1
[ 0.614596] initcall kobject_uevent_init+0x0/0x10 returned 0 after 0 usecs
[ 0.615695] calling bts_init+0x0/0xc0 @ 1
[ 0.616592] initcall bts_init+0x0/0xc0 returned -19 after 0 usecs
[ 0.617592] calling pt_init+0x0/0x3c0 @ 1
[ 0.618296] initcall pt_init+0x0/0x3c0 returned -19 after 0 usecs
[ 0.618592] calling boot_params_ksysfs_init+0x0/0x320 @ 1
[ 0.619595] initcall boot_params_ksysfs_init+0x0/0x320 returned 0 after 0 usecs
[ 0.620592] calling sbf_init+0x0/0xe0 @ 1
[ 0.621592] initcall sbf_init+0x0/0xe0 returned 0 after 0 usecs
[ 0.622592] calling arch_kdebugfs_init+0x0/0x220 @ 1
[ 0.623597] initcall arch_kdebugfs_init+0x0/0x220 returned 0 after 0 usecs
[ 0.624592] calling xfd_update_static_branch+0x0/0x30 @ 1
[ 0.625592] initcall xfd_update_static_branch+0x0/0x30 returned 0 after 0 usecs
[ 0.626592] calling intel_pconfig_init+0x0/0x90 @ 1
[ 0.628456] initcall intel_pconfig_init+0x0/0x90 returned 0 after 0 usecs
[ 0.628592] calling mtrr_if_init+0x0/0x70 @ 1
[ 0.629366] initcall mtrr_if_init+0x0/0x70 returned 0 after 0 usecs
[ 0.629592] calling activate_jump_labels+0x0/0x40 @ 1
[ 0.630592] initcall activate_jump_labels+0x0/0x40 returned 0 after 0 usecs
[ 0.631592] calling init_s4_sigcheck+0x0/0x30 @ 1
[ 0.632592] initcall init_s4_sigcheck+0x0/0x30 returned 0 after 0 usecs
[ 0.633591] calling ffh_cstate_init+0x0/0x40 @ 1
[ 0.634599] initcall ffh_cstate_init+0x0/0x40 returned 0 after 0 usecs
[ 0.635591] calling kvm_alloc_cpumask+0x0/0xc0 @ 1
[ 0.636594] initcall kvm_alloc_cpumask+0x0/0xc0 returned 0 after 0 usecs
[ 0.637591] calling activate_jump_labels+0x0/0x40 @ 1
[ 0.638745] initcall activate_jump_labels+0x0/0x40 returned 0 after 0 usecs
[ 0.639592] calling kcmp_cookies_init+0x0/0x40 @ 1
[ 0.640594] initcall kcmp_cookies_init+0x0/0x40 returned 0 after 0 usecs
[ 0.641592] calling cryptomgr_init+0x0/0x10 @ 1
[ 0.642592] initcall cryptomgr_init+0x0/0x10 returned 0 after 0 usecs
[ 0.643592] calling acpi_pci_init+0x0/0x50 @ 1
[ 0.644300] initcall acpi_pci_init+0x0/0x50 returned 0 after 0 usecs
[ 0.644592] calling dma_channel_table_init+0x0/0x100 @ 1
[ 0.645643] initcall dma_channel_table_init+0x0/0x100 returned 0 after 0 usecs
[ 0.646592] calling dma_bus_init+0x0/0xf0 @ 1
[ 0.647602] initcall dma_bus_init+0x0/0xf0 returned 0 after 0 usecs
[ 0.648592] calling serial_base_init+0x0/0x70 @ 1
[ 0.649605] initcall serial_base_init+0x0/0x70 returned 0 after 0 usecs
[ 0.650592] calling iommu_dma_init+0x0/0x20 @ 1
[ 0.651592] initcall iommu_dma_init+0x0/0x20 returned 0 after 0 usecs
[ 0.652592] calling dmi_id_init+0x0/0x3e0 @ 1
[ 0.653320] initcall dmi_id_init+0x0/0x3e0 returned 0 after 0 usecs
[ 0.653592] calling pci_arch_init+0x0/0x90 @ 1
[ 0.654652] PCI: ECAM [mem 0xb0000000-0xbfffffff] (base 0xb0000000) for domain 0000 [bus 00-ff]
[ 0.655593] PCI: ECAM [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[ 0.656603] PCI: Using configuration type 1 for base access
[ 0.657594] initcall pci_arch_init+0x0/0x90 returned 0 after 3000 usecs
[ 0.658693] calling init_vdso_image_64+0x0/0x10 @ 1
[ 0.659599] initcall init_vdso_image_64+0x0/0x10 returned 0 after 0 usecs
[ 0.660592] calling init_vdso_image_32+0x0/0x10 @ 1
[ 0.661602] initcall init_vdso_image_32+0x0/0x10 returned 0 after 0 usecs
[ 0.662592] calling fixup_ht_bug+0x0/0xd0 @ 1
[ 0.663592] initcall fixup_ht_bug+0x0/0xd0 returned 0 after 0 usecs
[ 0.664593] calling mtrr_init_finalize+0x0/0x40 @ 1
[ 0.665368] initcall mtrr_init_finalize+0x0/0x40 returned 0 after 0 usecs
[ 0.665592] calling uid_cache_init+0x0/0xd0 @ 1
[ 0.666598] initcall uid_cache_init+0x0/0xd0 returned 0 after 0 usecs
[ 0.667592] calling param_sysfs_init+0x0/0x50 @ 1
[ 0.668594] initcall param_sysfs_init+0x0/0x50 returned 0 after 0 usecs
[ 0.669592] calling user_namespace_sysctl_init+0x0/0xd0 @ 1
[ 0.670601] initcall user_namespace_sysctl_init+0x0/0xd0 returned 0 after 0 usecs
[ 0.671592] calling proc_schedstat_init+0x0/0x30 @ 1
[ 0.672595] initcall proc_schedstat_init+0x0/0x30 returned 0 after 0 usecs
[ 0.673592] calling pm_sysrq_init+0x0/0x20 @ 1
[ 0.674604] initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 usecs
[ 0.675592] calling create_proc_profile+0x0/0xe0 @ 1
[ 0.676379] initcall create_proc_profile+0x0/0xe0 returned 0 after 0 usecs
[ 0.676592] calling crash_save_vmcoreinfo_init+0x0/0x690 @ 1
[ 0.677620] initcall crash_save_vmcoreinfo_init+0x0/0x690 returned 0 after 0 usecs
[ 0.678592] calling crash_notes_memory_init+0x0/0x40 @ 1
[ 0.679441] initcall crash_notes_memory_init+0x0/0x40 returned 0 after 0 usecs
[ 0.679592] calling crash_hotplug_init+0x0/0x30 @ 1
[ 0.680366] initcall crash_hotplug_init+0x0/0x30 returned 67 after 0 usecs
[ 0.680592] calling cgroup_sysfs_init+0x0/0x20 @ 1
[ 0.681594] initcall cgroup_sysfs_init+0x0/0x20 returned 0 after 0 usecs
[ 0.682592] calling init_optprobes+0x0/0x30 @ 1
[ 0.683592] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.684592] initcall init_optprobes+0x0/0x30 returned 0 after 1000 usecs
[ 0.685592] calling trace_eval_init+0x0/0xc0 @ 1
[ 0.686614] initcall trace_eval_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.687620] calling oom_init+0x0/0x60 @ 1
[ 0.688618] initcall oom_init+0x0/0x60 returned 0 after 0 usecs
[ 0.689593] calling default_bdi_init+0x0/0x30 @ 1
[ 0.690629] initcall default_bdi_init+0x0/0x30 returned 0 after 0 usecs
[ 0.691593] calling percpu_enable_async+0x0/0x20 @ 1
[ 0.692357] initcall percpu_enable_async+0x0/0x20 returned 0 after 0 usecs
[ 0.692592] calling kcompactd_init+0x0/0xd0 @ 1
[ 0.693368] initcall kcompactd_init+0x0/0xd0 returned 0 after 0 usecs
[ 0.693593] calling init_user_reserve+0x0/0x40 @ 1
[ 0.694592] initcall init_user_reserve+0x0/0x40 returned 0 after 0 usecs
[ 0.695592] calling init_admin_reserve+0x0/0x40 @ 1
[ 0.696592] initcall init_admin_reserve+0x0/0x40 returned 0 after 0 usecs
[ 0.697592] calling init_reserve_notifier+0x0/0x10 @ 1
[ 0.698592] initcall init_reserve_notifier+0x0/0x10 returned 0 after 0 usecs
[ 0.699592] calling swap_init_sysfs+0x0/0x70 @ 1
[ 0.700595] initcall swap_init_sysfs+0x0/0x70 returned 0 after 0 usecs
[ 0.701592] calling swapfile_init+0x0/0x100 @ 1
[ 0.702592] initcall swapfile_init+0x0/0x100 returned 0 after 0 usecs
[ 0.703592] calling hugetlb_init+0x0/0x5f0 @ 1
[ 0.704636] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.705592] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.706614] initcall hugetlb_init+0x0/0x5f0 returned 0 after 3000 usecs
[ 0.707592] calling memory_tier_init+0x0/0x400 @ 1
[ 0.708639] initcall memory_tier_init+0x0/0x400 returned 0 after 0 usecs
[ 0.709592] calling numa_init_sysfs+0x0/0x70 @ 1
[ 0.710370] initcall numa_init_sysfs+0x0/0x70 returned 0 after 0 usecs
[ 0.710592] calling seqiv_module_init+0x0/0x10 @ 1
[ 0.711593] initcall seqiv_module_init+0x0/0x10 returned 0 after 0 usecs
[ 0.712592] calling echainiv_module_init+0x0/0x10 @ 1
[ 0.713592] initcall echainiv_module_init+0x0/0x10 returned 0 after 0 usecs
[ 0.714592] calling rsa_init+0x0/0x50 @ 1
[ 0.715593] initcall rsa_init+0x0/0x50 returned 0 after 0 usecs
[ 0.716592] calling crypto_cmac_module_init+0x0/0x10 @ 1
[ 0.717592] initcall crypto_cmac_module_init+0x0/0x10 returned 0 after 0 usecs
[ 0.718592] calling hmac_module_init+0x0/0x10 @ 1
[ 0.719592] initcall hmac_module_init+0x0/0x10 returned 0 after 0 usecs
[ 0.720592] calling crypto_null_mod_init+0x0/0x80 @ 1
[ 0.721594] initcall crypto_null_mod_init+0x0/0x80 returned 0 after 0 usecs
[ 0.722592] calling md5_mod_init+0x0/0x10 @ 1
[ 0.723593] initcall md5_mod_init+0x0/0x10 returned 0 after 0 usecs
[ 0.724592] calling sha256_generic_mod_init+0x0/0x20 @ 1
[ 0.725458] initcall sha256_generic_mod_init+0x0/0x20 returned 0 after 0 usecs
[ 0.725592] calling sha512_generic_mod_init+0x0/0x20 @ 1
[ 0.726456] initcall sha512_generic_mod_init+0x0/0x20 returned 0 after 0 usecs
[ 0.726592] calling sha3_generic_mod_init+0x0/0x20 @ 1
[ 0.727595] initcall sha3_generic_mod_init+0x0/0x20 returned 0 after 0 usecs
[ 0.728592] calling crypto_ecb_module_init+0x0/0x10 @ 1
[ 0.729592] initcall crypto_ecb_module_init+0x0/0x10 returned 0 after 0 usecs
[ 0.730592] calling crypto_cbc_module_init+0x0/0x10 @ 1
[ 0.731442] initcall crypto_cbc_module_init+0x0/0x10 returned 0 after 0 usecs
[ 0.731592] calling crypto_ctr_module_init+0x0/0x20 @ 1
[ 0.732592] initcall crypto_ctr_module_init+0x0/0x20 returned 0 after 0 usecs
[ 0.733592] calling crypto_gcm_module_init+0x0/0x80 @ 1
[ 0.734593] initcall crypto_gcm_module_init+0x0/0x80 returned 0 after 0 usecs
[ 0.735592] calling crypto_ccm_module_init+0x0/0x20 @ 1
[ 0.736592] initcall crypto_ccm_module_init+0x0/0x20 returned 0 after 0 usecs
[ 0.737592] calling aes_init+0x0/0x10 @ 1
[ 0.738593] initcall aes_init+0x0/0x10 returned 0 after 0 usecs
[ 0.739534] calling crc32c_mod_init+0x0/0x10 @ 1
[ 0.739593] initcall crc32c_mod_init+0x0/0x10 returned 0 after 0 usecs
[ 0.740592] calling crypto_authenc_module_init+0x0/0x10 @ 1
[ 0.741592] initcall crypto_authenc_module_init+0x0/0x10 returned 0 after 0 usecs
[ 0.742592] calling crypto_authenc_esn_module_init+0x0/0x10 @ 1
[ 0.743592] initcall crypto_authenc_esn_module_init+0x0/0x10 returned 0 after 0 usecs
[ 0.744592] calling drbg_init+0x0/0x200 @ 1
[ 0.745597] initcall drbg_init+0x0/0x200 returned 0 after 0 usecs
[ 0.746592] calling ghash_mod_init+0x0/0x10 @ 1
[ 0.747317] initcall ghash_mod_init+0x0/0x10 returned 0 after 0 usecs
[ 0.747592] calling init_bio+0x0/0x90 @ 1
[ 0.748608] initcall init_bio+0x0/0x90 returned 0 after 0 usecs
[ 0.749592] calling blk_ioc_init+0x0/0x30 @ 1
[ 0.750592] initcall blk_ioc_init+0x0/0x30 returned 0 after 0 usecs
[ 0.751593] calling blk_mq_init+0x0/0x130 @ 1
[ 0.752602] initcall blk_mq_init+0x0/0x130 returned 0 after 0 usecs
[ 0.753592] calling genhd_device_init+0x0/0x50 @ 1
[ 0.754622] initcall genhd_device_init+0x0/0x50 returned 0 after 1000 usecs
[ 0.755593] calling io_wq_init+0x0/0x40 @ 1
[ 0.756592] initcall io_wq_init+0x0/0x40 returned 0 after 0 usecs
[ 0.757592] calling sg_pool_init+0x0/0xe0 @ 1
[ 0.758334] initcall sg_pool_init+0x0/0xe0 returned 0 after 0 usecs
[ 0.758592] calling pci_slot_init+0x0/0x50 @ 1
[ 0.759464] initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs
[ 0.759592] calling acpi_init+0x0/0x510 @ 1
[ 0.760440] ACPI: Added _OSI(Module Device)
[ 0.760593] ACPI: Added _OSI(Processor Device)
[ 0.761592] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.762592] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.764889] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.766625] ACPI: _OSC evaluation for CPUs failed, trying _PDC
[ 0.767798] ACPI: Interpreter enabled
[ 0.768602] ACPI: PM: (supports S0 S3 S4 S5)
[ 0.769287] ACPI: Using IOAPIC for interrupt routing
[ 0.769612] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.770592] PCI: Using E820 reservations for host bridge windows
[ 0.771561] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.775687] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.776596] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.777646] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[ 0.778655] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[ 0.779646] PCI host bridge to bus 0000:00
[ 0.780593] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.781592] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.782592] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.783592] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[ 0.784592] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.785593] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[ 0.786592] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.787622] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.788592] pci 0000:00:00.0: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.789592] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 conventional PCI endpoint
[ 0.790893] pci 0000:00:00.0: calling quirk_igfx_skip_te_disable+0x0/0x90 @ 1
[ 0.791593] pci 0000:00:00.0: quirk_igfx_skip_te_disable+0x0/0x90 took 0 usecs
[ 0.792753] pci 0000:00:01.0: [1234:1111] type 00 class 0x030000 conventional PCI endpoint
[ 0.796612] pci 0000:00:01.0: BAR 0 [mem 0xfd000000-0xfdffffff pref]
[ 0.801612] pci 0000:00:01.0: BAR 2 [mem 0xfebf0000-0xfebf0fff]
[ 0.809294] pci 0000:00:01.0: ROM [mem 0xfebe0000-0xfebeffff pref]
[ 0.809662] pci 0000:00:01.0: calling pci_fixup_video+0x0/0x110 @ 1
[ 0.810621] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.811592] pci 0000:00:01.0: pci_fixup_video+0x0/0x110 took 976 usecs
[ 0.813079] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 conventional PCI endpoint
[ 0.814003] pci 0000:00:1f.0: calling quirk_ich7_lpc+0x0/0x60 @ 1
[ 0.814615] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.815635] pci 0000:00:1f.0: quirk_ich7_lpc+0x0/0x60 took 976 usecs
[ 0.816593] pci 0000:00:1f.0: calling quirk_igfx_skip_te_disable+0x0/0x90 @ 1
[ 0.817594] pci 0000:00:1f.0: quirk_igfx_skip_te_disable+0x0/0x90 took 0 usecs
[ 0.818796] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 conventional PCI endpoint
[ 0.823594] pci 0000:00:1f.2: BAR 4 [io 0xc040-0xc05f]
[ 0.825347] pci 0000:00:1f.2: BAR 5 [mem 0xfebf1000-0xfebf1fff]
[ 0.827057] pci 0000:00:1f.2: calling quirk_igfx_skip_te_disable+0x0/0x90 @ 1
[ 0.827593] pci 0000:00:1f.2: quirk_igfx_skip_te_disable+0x0/0x90 took 0 usecs
[ 0.829844] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.831876] pci 0000:00:1f.3: BAR 4 [io 0x0700-0x073f]
[ 0.833112] pci 0000:00:1f.3: calling quirk_igfx_skip_te_disable+0x0/0x90 @ 1
[ 0.833593] pci 0000:00:1f.3: quirk_igfx_skip_te_disable+0x0/0x90 took 0 usecs
[ 0.835023] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[ 0.835648] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.836650] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.837644] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.838644] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[ 0.839645] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[ 0.840644] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.841643] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 0.842615] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[ 0.843600] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[ 0.844601] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[ 0.845600] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[ 0.846598] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[ 0.847598] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[ 0.848596] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[ 0.849597] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[ 0.852621] initcall acpi_init+0x0/0x510 returned 0 after 93000 usecs
[ 0.853596] calling pnp_init+0x0/0x10 @ 1
[ 0.854232] initcall pnp_init+0x0/0x10 returned 0 after 0 usecs
[ 0.854592] calling misc_init+0x0/0xb0 @ 1
[ 0.855603] initcall misc_init+0x0/0xb0 returned 0 after 0 usecs
[ 0.856592] calling iommu_subsys_init+0x0/0x160 @ 1
[ 0.857592] iommu: Default domain type: Translated
[ 0.858592] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.859592] initcall iommu_subsys_init+0x0/0x160 returned 0 after 2000 usecs
[ 0.860592] calling cn_init+0x0/0x100 @ 1
[ 0.861620] initcall cn_init+0x0/0x100 returned 0 after 0 usecs
[ 0.862592] calling dma_buf_init+0x0/0xc0 @ 1
[ 0.863339] initcall dma_buf_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.863592] calling init_scsi+0x0/0x80 @ 1
[ 0.864646] SCSI subsystem initialized
[ 0.865592] initcall init_scsi+0x0/0x80 returned 0 after 1000 usecs
[ 0.866592] calling ata_init+0x0/0x420 @ 1
[ 0.867695] libata version 3.00 loaded.
[ 0.868230] initcall ata_init+0x0/0x420 returned 0 after 1000 usecs
[ 0.868592] calling phy_init+0x0/0x350 @ 1
[ 0.869619] initcall phy_init+0x0/0x350 returned 0 after 0 usecs
[ 0.870592] calling init_pcmcia_cs+0x0/0x40 @ 1
[ 0.871594] initcall init_pcmcia_cs+0x0/0x40 returned 0 after 0 usecs
[ 0.872592] calling usb_common_init+0x0/0x20 @ 1
[ 0.873347] initcall usb_common_init+0x0/0x20 returned 0 after 0 usecs
[ 0.873592] calling usb_init+0x0/0x170 @ 1
[ 0.874595] ACPI: bus type USB registered
[ 0.875609] usbcore: registered new interface driver usbfs
[ 0.876600] usbcore: registered new interface driver hub
[ 0.877611] usbcore: registered new device driver usb
[ 0.878415] initcall usb_init+0x0/0x170 returned 0 after 3000 usecs
[ 0.878592] calling serio_init+0x0/0x40 @ 1
[ 0.879597] initcall serio_init+0x0/0x40 returned 0 after 0 usecs
[ 0.880592] calling input_init+0x0/0x110 @ 1
[ 0.881597] initcall input_init+0x0/0x110 returned 0 after 0 usecs
[ 0.882592] calling rtc_init+0x0/0x50 @ 1
[ 0.883239] initcall rtc_init+0x0/0x50 returned 0 after 0 usecs
[ 0.883592] calling pps_init+0x0/0xb0 @ 1
[ 0.884594] pps_core: LinuxPPS API ver. 1 registered
[ 0.885592] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.886592] initcall pps_init+0x0/0xb0 returned 0 after 2000 usecs
[ 0.887592] calling ptp_init+0x0/0xa0 @ 1
[ 0.888594] PTP clock support registered
[ 0.889211] initcall ptp_init+0x0/0xa0 returned 0 after 0 usecs
[ 0.889592] calling power_supply_class_init+0x0/0x40 @ 1
[ 0.890599] initcall power_supply_class_init+0x0/0x40 returned 0 after 0 usecs
[ 0.891592] calling hwmon_init+0x0/0x100 @ 1
[ 0.892595] initcall hwmon_init+0x0/0x100 returned 0 after 0 usecs
[ 0.893592] calling md_init+0x0/0x160 @ 1
[ 0.894640] initcall md_init+0x0/0x160 returned 0 after 0 usecs
[ 0.895592] calling leds_init+0x0/0x10 @ 1
[ 0.896255] initcall leds_init+0x0/0x10 returned 0 after 0 usecs
[ 0.896592] calling dmi_init+0x0/0x130 @ 1
[ 0.897612] initcall dmi_init+0x0/0x130 returned 0 after 0 usecs
[ 0.898592] calling efisubsys_init+0x0/0x30 @ 1
[ 0.899592] initcall efisubsys_init+0x0/0x30 returned 0 after 0 usecs
[ 0.900592] calling nvmem_init+0x0/0x10 @ 1
[ 0.901276] initcall nvmem_init+0x0/0x10 returned 0 after 0 usecs
[ 0.901592] calling init_soundcore+0x0/0x10 @ 1
[ 0.902594] initcall init_soundcore+0x0/0x10 returned 0 after 0 usecs
[ 0.903592] calling alsa_sound_init+0x0/0xa0 @ 1
[ 0.904601] Advanced Linux Sound Architecture Driver Initialized.
[ 0.905592] initcall alsa_sound_init+0x0/0xa0 returned 0 after 1000 usecs
[ 0.906592] calling alsa_seq_device_init+0x0/0x80 @ 1
[ 0.907599] initcall alsa_seq_device_init+0x0/0x80 returned 0 after 0 usecs
[ 0.908592] calling hda_bus_init+0x0/0x10 @ 1
[ 0.909596] initcall hda_bus_init+0x0/0x10 returned 0 after 0 usecs
[ 0.910592] calling proto_init+0x0/0x10 @ 1
[ 0.911366] initcall proto_init+0x0/0x10 returned 0 after 0 usecs
[ 0.911592] calling net_dev_init+0x0/0x270 @ 1
[ 0.912728] initcall net_dev_init+0x0/0x270 returned 0 after 0 usecs
[ 0.913592] calling neigh_init+0x0/0x90 @ 1
[ 0.914594] initcall neigh_init+0x0/0x90 returned 0 after 0 usecs
[ 0.915592] calling fib_notifier_init+0x0/0x10 @ 1
[ 0.916595] initcall fib_notifier_init+0x0/0x10 returned 0 after 0 usecs
[ 0.917594] calling netdev_genl_init+0x0/0x40 @ 1
[ 0.918613] initcall netdev_genl_init+0x0/0x40 returned 0 after 0 usecs
[ 0.919592] calling fib_rules_init+0x0/0xc0 @ 1
[ 0.920596] initcall fib_rules_init+0x0/0xc0 returned 0 after 0 usecs
[ 0.921592] calling init_cgroup_netprio+0x0/0x20 @ 1
[ 0.922594] initcall init_cgroup_netprio+0x0/0x20 returned 0 after 0 usecs
[ 0.923592] calling pktsched_init+0x0/0x140 @ 1
[ 0.924597] initcall pktsched_init+0x0/0x140 returned 0 after 0 usecs
[ 0.925592] calling tc_filter_init+0x0/0x110 @ 1
[ 0.926605] initcall tc_filter_init+0x0/0x110 returned 0 after 0 usecs
[ 0.927592] calling tc_action_init+0x0/0x60 @ 1
[ 0.928592] initcall tc_action_init+0x0/0x60 returned 0 after 0 usecs
[ 0.929592] calling ethnl_init+0x0/0x70 @ 1
[ 0.930301] initcall ethnl_init+0x0/0x70 returned 0 after 0 usecs
[ 0.930592] calling nexthop_init+0x0/0x100 @ 1
[ 0.931599] initcall nexthop_init+0x0/0x100 returned 0 after 0 usecs
[ 0.932592] calling cipso_v4_init+0x0/0x70 @ 1
[ 0.933592] initcall cipso_v4_init+0x0/0x70 returned 0 after 0 usecs
[ 0.934592] calling ieee80211_init+0x0/0x70 @ 1
[ 0.935611] initcall ieee80211_init+0x0/0x70 returned 0 after 0 usecs
[ 0.936592] calling netlbl_init+0x0/0x80 @ 1
[ 0.937592] NetLabel: Initializing
[ 0.938188] NetLabel: domain hash size = 128
[ 0.938592] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.939613] NetLabel: unlabeled traffic allowed by default
[ 0.940591] initcall netlbl_init+0x0/0x80 returned 0 after 3000 usecs
[ 0.941592] calling rfkill_init+0x0/0x140 @ 1
[ 0.942658] initcall rfkill_init+0x0/0x140 returned 0 after 0 usecs
[ 0.943593] calling pci_subsys_init+0x0/0x90 @ 1
[ 0.944592] PCI: Using ACPI for IRQ routing
[ 1.003163] PCI: pci_cache_line_size set to 64 bytes
[ 1.003673] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 1.004592] e820: reserve RAM buffer [mem 0x1ffde000-0x1fffffff]
[ 1.005592] initcall pci_subsys_init+0x0/0x90 returned 0 after 61000 usecs
[ 1.006592] calling vsprintf_init_hashval+0x0/0x20 @ 1
[ 1.007592] initcall vsprintf_init_hashval+0x0/0x20 returned 0 after 0 usecs
[ 1.008592] calling efi_runtime_map_init+0x0/0x260 @ 1
[ 1.009592] initcall efi_runtime_map_init+0x0/0x260 returned 0 after 0 usecs
[ 1.010592] calling vga_arb_device_init+0x0/0xa0 @ 1
[ 1.011611] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[ 1.012591] pci 0000:00:01.0: vgaarb: bridge control possible
[ 1.012591] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 1.012594] vgaarb: loaded
[ 1.013023] initcall vga_arb_device_init+0x0/0xa0 returned 0 after 1000 usecs
[ 1.014592] calling acpi_wmi_init+0x0/0x90 @ 1
[ 1.015346] initcall acpi_wmi_init+0x0/0x90 returned 0 after 0 usecs
[ 1.015698] calling nmi_warning_debugfs+0x0/0x30 @ 1
[ 1.016597] initcall nmi_warning_debugfs+0x0/0x30 returned 0 after 0 usecs
[ 1.017592] calling hpet_late_init+0x0/0x420 @ 1
[ 1.018607] hpet: 3 channels of 0 reserved for per-cpu timers
[ 1.019609] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.020591] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 1.025592] initcall hpet_late_init+0x0/0x420 returned 0 after 7000 usecs
[ 1.026592] calling init_amd_nbs+0x0/0x420 @ 1
[ 1.027594] initcall init_amd_nbs+0x0/0x420 returned 0 after 0 usecs
[ 1.028591] calling iomem_init_inode+0x0/0x90 @ 1
[ 1.029594] initcall iomem_init_inode+0x0/0x90 returned 0 after 1000 usecs
[ 1.030591] calling clocksource_done_booting+0x0/0x50 @ 1
[ 1.031463] clocksource: Switched to clocksource kvm-clock
[ 1.031494] initcall clocksource_done_booting+0x0/0x50 returned 0 after 903 usecs
[ 1.032642] calling tracer_init_tracefs+0x0/0xd0 @ 1
[ 1.033410] initcall tracer_init_tracefs+0x0/0xd0 returned 0 after 16 usecs
[ 1.034410] calling init_trace_printk_function_export+0x0/0x30 @ 1
[ 1.035931] initcall init_trace_printk_function_export+0x0/0x30 returned 0 after 615 usecs
[ 1.037182] calling init_kprobe_trace+0x0/0x1b0 @ 1
[ 1.037892] initcall init_kprobe_trace+0x0/0x1b0 returned 0 after 1 usecs
[ 1.038859] calling init_dynamic_event+0x0/0x30 @ 1
[ 1.039573] initcall init_dynamic_event+0x0/0x30 returned 0 after 0 usecs
[ 1.040542] calling init_uprobe_trace+0x0/0x70 @ 1
[ 1.041244] initcall init_uprobe_trace+0x0/0x70 returned 0 after 4 usecs
[ 1.042223] calling secretmem_init+0x0/0x50 @ 1
[ 1.043025] initcall secretmem_init+0x0/0x50 returned 0 after 18 usecs
[ 1.044182] calling init_fs_stat_sysctls+0x0/0x40 @ 1
[ 1.045068] initcall init_fs_stat_sysctls+0x0/0x40 returned 0 after 4 usecs
[ 1.046227] calling init_fs_exec_sysctls+0x0/0x30 @ 1
[ 1.047090] initcall init_fs_exec_sysctls+0x0/0x30 returned 0 after 0 usecs
[ 1.048249] calling init_pipe_fs+0x0/0x70 @ 1
[ 1.049101] initcall init_pipe_fs+0x0/0x70 returned 0 after 18 usecs
[ 1.050253] calling init_fs_namei_sysctls+0x0/0x30 @ 1
[ 1.051156] initcall init_fs_namei_sysctls+0x0/0x30 returned 0 after 1 usecs
[ 1.052329] calling init_fs_dcache_sysctls+0x0/0x30 @ 1
[ 1.053291] initcall init_fs_dcache_sysctls+0x0/0x30 returned 0 after 0 usecs
[ 1.054517] calling init_fs_namespace_sysctls+0x0/0x30 @ 1
[ 1.055528] initcall init_fs_namespace_sysctls+0x0/0x30 returned 0 after 1 usecs
[ 1.056848] calling inotify_user_setup+0x0/0x100 @ 1
[ 1.057778] initcall inotify_user_setup+0x0/0x100 returned 0 after 9 usecs
[ 1.058921] calling eventpoll_init+0x0/0x110 @ 1
[ 1.059713] initcall eventpoll_init+0x0/0x110 returned 0 after 1 usecs
[ 1.060799] calling anon_inode_init+0x0/0x60 @ 1
[ 1.061607] initcall anon_inode_init+0x0/0x60 returned 0 after 10 usecs
[ 1.062713] calling proc_locks_init+0x0/0x30 @ 1
[ 1.063501] initcall proc_locks_init+0x0/0x30 returned 0 after 1 usecs
[ 1.064596] calling init_fs_coredump_sysctls+0x0/0x30 @ 1
[ 1.065533] initcall init_fs_coredump_sysctls+0x0/0x30 returned 0 after 2 usecs
[ 1.066814] calling iomap_init+0x0/0x20 @ 1
[ 1.067580] initcall iomap_init+0x0/0x20 returned 0 after 21 usecs
[ 1.068534] calling dquot_init+0x0/0x160 @ 1
[ 1.069225] VFS: Disk quotas dquot_6.6.0
[ 1.069934] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.071060] initcall dquot_init+0x0/0x160 returned 0 after 1835 usecs
[ 1.072036] calling quota_init+0x0/0x30 @ 1
[ 1.072695] initcall quota_init+0x0/0x30 returned 0 after 6 usecs
[ 1.073619] calling proc_cmdline_init+0x0/0x40 @ 1
[ 1.074435] initcall proc_cmdline_init+0x0/0x40 returned 0 after 1 usecs
[ 1.075539] calling proc_consoles_init+0x0/0x30 @ 1
[ 1.076349] initcall proc_consoles_init+0x0/0x30 returned 0 after 0 usecs
[ 1.077379] calling proc_cpuinfo_init+0x0/0x30 @ 1
[ 1.078126] initcall proc_cpuinfo_init+0x0/0x30 returned 0 after 0 usecs
[ 1.079141] calling proc_devices_init+0x0/0x30 @ 1
[ 1.079955] initcall proc_devices_init+0x0/0x30 returned 0 after 0 usecs
[ 1.081095] calling proc_interrupts_init+0x0/0x30 @ 1
[ 1.081941] initcall proc_interrupts_init+0x0/0x30 returned 0 after 0 usecs
[ 1.082992] calling proc_loadavg_init+0x0/0x30 @ 1
[ 1.083769] initcall proc_loadavg_init+0x0/0x30 returned 0 after 0 usecs
[ 1.084882] calling proc_meminfo_init+0x0/0x30 @ 1
[ 1.085710] initcall proc_meminfo_init+0x0/0x30 returned 0 after 0 usecs
[ 1.086848] calling proc_stat_init+0x0/0x30 @ 1
[ 1.087557] initcall proc_stat_init+0x0/0x30 returned 0 after 0 usecs
[ 1.088531] calling proc_uptime_init+0x0/0x30 @ 1
[ 1.089256] initcall proc_uptime_init+0x0/0x30 returned 0 after 0 usecs
[ 1.090257] calling proc_version_init+0x0/0x30 @ 1
[ 1.091000] initcall proc_version_init+0x0/0x30 returned 0 after 0 usecs
[ 1.092013] calling proc_softirqs_init+0x0/0x30 @ 1
[ 1.092768] initcall proc_softirqs_init+0x0/0x30 returned 0 after 0 usecs
[ 1.093792] calling proc_kcore_init+0x0/0x180 @ 1
[ 1.094533] initcall proc_kcore_init+0x0/0x180 returned 0 after 7 usecs
[ 1.095530] calling vmcore_init+0x0/0x6e0 @ 1
[ 1.096249] initcall vmcore_init+0x0/0x6e0 returned 0 after 0 usecs
[ 1.097246] calling proc_kmsg_init+0x0/0x30 @ 1
[ 1.097948] initcall proc_kmsg_init+0x0/0x30 returned 0 after 0 usecs
[ 1.098903] calling proc_page_init+0x0/0x40 @ 1
[ 1.099590] initcall proc_page_init+0x0/0x40 returned 0 after 1 usecs
[ 1.100568] calling netfs_init+0x0/0x70 @ 1
[ 1.101217] initcall netfs_init+0x0/0x70 returned 0 after 1 usecs
[ 1.102160] calling init_ramfs_fs+0x0/0x10 @ 1
[ 1.102849] initcall init_ramfs_fs+0x0/0x10 returned 0 after 1 usecs
[ 1.103809] calling init_hugetlbfs_fs+0x0/0x140 @ 1
[ 1.104669] initcall init_hugetlbfs_fs+0x0/0x140 returned 0 after 36 usecs
[ 1.105816] calling acpi_event_init+0x0/0x40 @ 1
[ 1.106631] initcall acpi_event_init+0x0/0x40 returned 0 after 4 usecs
[ 1.107659] calling pnp_system_init+0x0/0x10 @ 1
[ 1.108462] initcall pnp_system_init+0x0/0x10 returned 0 after 14 usecs
[ 1.109625] calling pnpacpi_init+0x0/0x80 @ 1
[ 1.110370] pnp: PnP ACPI init
[ 1.111246] pnp: PnP ACPI: found 5 devices
[ 1.111912] initcall pnpacpi_init+0x0/0x80 returned 0 after 1541 usecs
[ 1.112960] calling chr_dev_init+0x0/0xa0 @ 1
[ 1.115932] initcall chr_dev_init+0x0/0xa0 returned 0 after 2214 usecs
[ 1.117003] calling hwrng_modinit+0x0/0xb0 @ 1
[ 1.117729] initcall hwrng_modinit+0x0/0xb0 returned 0 after 37 usecs
[ 1.118748] calling firmware_class_init+0x0/0xf0 @ 1
[ 1.119524] initcall firmware_class_init+0x0/0xf0 returned 0 after 4 usecs
[ 1.120642] calling init_pcmcia_bus+0x0/0x70 @ 1
[ 1.121464] initcall init_pcmcia_bus+0x0/0x70 returned 0 after 8 usecs
[ 1.122557] calling init_acpi_pm_clocksource+0x0/0x110 @ 1
[ 1.128052] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.129502] initcall init_acpi_pm_clocksource+0x0/0x110 returned 0 after 6028 usecs
[ 1.130793] calling p2sb_fs_init+0x0/0x150 @ 1
[ 1.131602] initcall p2sb_fs_init+0x0/0x150 returned 0 after 44 usecs
[ 1.132661] calling sysctl_core_init+0x0/0x30 @ 1
[ 1.133506] initcall sysctl_core_init+0x0/0x30 returned 0 after 22 usecs
[ 1.134573] calling eth_offload_init+0x0/0x20 @ 1
[ 1.135303] initcall eth_offload_init+0x0/0x20 returned 0 after 2 usecs
[ 1.136307] calling ipv4_offload_init+0x0/0xa0 @ 1
[ 1.137172] initcall ipv4_offload_init+0x0/0xa0 returned 0 after 2 usecs
[ 1.138228] calling inet_init+0x0/0x300 @ 1
[ 1.138915] NET: Registered PF_INET protocol family
[ 1.139708] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 1.141106] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 1.142377] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 1.143587] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 1.144732] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 1.145775] TCP: Hash tables configured (established 4096 bind 4096)
[ 1.146738] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 1.147673] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 1.148726] initcall inet_init+0x0/0x300 returned 0 after 9847 usecs
[ 1.149639] calling af_unix_init+0x0/0xc0 @ 1
[ 1.150315] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.151181] initcall af_unix_init+0x0/0xc0 returned 0 after 866 usecs
[ 1.152159] calling ipv6_offload_init+0x0/0x90 @ 1
[ 1.153059] initcall ipv6_offload_init+0x0/0x90 returned 0 after 3 usecs
[ 1.154257] calling init_sunrpc+0x0/0x90 @ 1
[ 1.155247] RPC: Registered named UNIX socket transport module.
[ 1.156283] RPC: Registered udp transport module.
[ 1.157089] RPC: Registered tcp transport module.
[ 1.157902] RPC: Registered tcp-with-tls transport module.
[ 1.158840] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.159942] initcall init_sunrpc+0x0/0x90 returned 0 after 4950 usecs
[ 1.161021] calling cfg80211_init+0x0/0xe0 @ 1
[ 1.162086] initcall cfg80211_init+0x0/0xe0 returned 0 after 306 usecs
[ 1.163088] calling pcibios_assign_resources+0x0/0xe0 @ 1
[ 1.164000] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.165021] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.165955] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.167102] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[ 1.168274] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[ 1.169377] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[ 1.169577] kwatchdog (92) used greatest stack depth: 15128 bytes left
[ 1.170520] initcall pcibios_assign_resources+0x0/0xe0 returned 0 after 6538 usecs
[ 1.172752] calling pci_apply_final_quirks+0x0/0x160 @ 1
[ 1.173713] PCI: CLS 0 bytes, default 64
[ 1.174391] initcall pci_apply_final_quirks+0x0/0x160 returned 0 after 731 usecs
[ 1.175664] calling acpi_reserve_resources+0x0/0x110 @ 1
[ 1.176633] initcall acpi_reserve_resources+0x0/0x110 returned 0 after 1 usecs
[ 1.177919] calling populate_rootfs+0x0/0x50 @ 1
[ 1.179154] initcall populate_rootfs+0x0/0x50 returned 0 after 515 usecs
[ 1.180283] calling pci_iommu_init+0x0/0x40 @ 1
[ 1.181105] initcall pci_iommu_init+0x0/0x40 returned 0 after 2 usecs
[ 1.182235] calling ia32_binfmt_init+0x0/0x30 @ 1
[ 1.183031] initcall ia32_binfmt_init+0x0/0x30 returned 0 after 1 usecs
[ 1.184137] calling rapl_pmu_init+0x0/0x280 @ 1
[ 1.184930] initcall rapl_pmu_init+0x0/0x280 returned -19 after 0 usecs
[ 1.186021] calling amd_ibs_init+0x0/0x320 @ 1
[ 1.186754] initcall amd_ibs_init+0x0/0x320 returned -19 after 0 usecs
[ 1.187843] calling amd_uncore_init+0x0/0x1a0 @ 1
[ 1.188581] initcall amd_uncore_init+0x0/0x1a0 returned -19 after 0 usecs
[ 1.189613] calling amd_iommu_pc_init+0x0/0x280 @ 1
[ 1.190374] initcall amd_iommu_pc_init+0x0/0x280 returned -19 after 2 usecs
[ 1.191527] calling msr_init+0x0/0x60 @ 1
[ 1.192237] initcall msr_init+0x0/0x60 returned 0 after 18 usecs
[ 1.193271] calling intel_uncore_init+0x0/0x5e0 @ 1
[ 1.194077] initcall intel_uncore_init+0x0/0x5e0 returned -19 after 0 usecs
[ 1.195212] calling cstate_pmu_init+0x0/0x290 @ 1
[ 1.196028] initcall cstate_pmu_init+0x0/0x290 returned -19 after 0 usecs
[ 1.197169] calling register_kernel_offset_dumper+0x0/0x20 @ 1
[ 1.198166] initcall register_kernel_offset_dumper+0x0/0x20 returned 0 after 0 usecs
[ 1.199459] calling i8259A_init_ops+0x0/0x30 @ 1
[ 1.200260] initcall i8259A_init_ops+0x0/0x30 returned 0 after 0 usecs
[ 1.201353] calling init_tsc_clocksource+0x0/0xd0 @ 1
[ 1.202214] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3985bbcfaa7, max_idle_ns: 881590561327 ns
[ 1.203877] initcall init_tsc_clocksource+0x0/0xd0 returned 0 after 1664 usecs
[ 1.205071] calling add_rtc_cmos+0x0/0xc0 @ 1
[ 1.205783] initcall add_rtc_cmos+0x0/0xc0 returned 0 after 0 usecs
[ 1.206853] calling i8237A_init_ops+0x0/0x40 @ 1
[ 1.207655] initcall i8237A_init_ops+0x0/0x40 returned 0 after 7 usecs
[ 1.208749] calling umwait_init+0x0/0xc0 @ 1
[ 1.209513] initcall umwait_init+0x0/0xc0 returned -19 after 0 usecs
[ 1.210548] calling msr_init+0x0/0xe0 @ 1
[ 1.212272] initcall msr_init+0x0/0xe0 returned 0 after 1003 usecs
[ 1.213320] calling cpuid_init+0x0/0xe0 @ 1
[ 1.214762] initcall cpuid_init+0x0/0xe0 returned 0 after 719 usecs
[ 1.215821] calling ioapic_init_ops+0x0/0x20 @ 1
[ 1.216615] initcall ioapic_init_ops+0x0/0x20 returned 0 after 0 usecs
[ 1.217771] calling add_pcspkr+0x0/0x80 @ 1
[ 1.218518] initcall add_pcspkr+0x0/0x80 returned 0 after 13 usecs
[ 1.219552] calling start_periodic_check_for_corruption+0x0/0x50 @ 1
[ 1.220640] initcall start_periodic_check_for_corruption+0x0/0x50 returned 0 after 0 usecs
[ 1.222016] calling audit_classes_init+0x0/0xc0 @ 1
[ 1.222849] initcall audit_classes_init+0x0/0xc0 returned 0 after 1 usecs
[ 1.223982] calling pt_dump_init+0x0/0x50 @ 1
[ 1.224741] initcall pt_dump_init+0x0/0x50 returned 0 after 0 usecs
[ 1.225694] calling iosf_mbi_init+0x0/0x30 @ 1
[ 1.226394] initcall iosf_mbi_init+0x0/0x30 returned 0 after 8 usecs
[ 1.227385] calling proc_execdomains_init+0x0/0x30 @ 1
[ 1.228283] initcall proc_execdomains_init+0x0/0x30 returned 0 after 2 usecs
[ 1.229414] calling register_warn_debugfs+0x0/0x30 @ 1
[ 1.230296] initcall register_warn_debugfs+0x0/0x30 returned 0 after 3 usecs
[ 1.231473] calling cpuhp_sysfs_init+0x0/0x100 @ 1
[ 1.232378] initcall cpuhp_sysfs_init+0x0/0x100 returned 0 after 78 usecs
[ 1.233520] calling ioresources_init+0x0/0x50 @ 1
[ 1.234275] initcall ioresources_init+0x0/0x50 returned 0 after 1 usecs
[ 1.235380] calling snapshot_device_init+0x0/0x10 @ 1
[ 1.236315] initcall snapshot_device_init+0x0/0x10 returned 0 after 70 usecs
[ 1.237504] calling irq_pm_init_ops+0x0/0x20 @ 1
[ 1.238294] initcall irq_pm_init_ops+0x0/0x20 returned 0 after 0 usecs
[ 1.239322] calling rcu_torture_init+0x0/0x1b40 @ 1
[ 1.240088] torture module --- rcu: disable_onoff_at_boot=0 ftrace_dump_at_shutdown=0 verbose_sleep_frequency=0 verbose_sleep_duration=1 random_shuffle=0
[ 1.242440] rcu-torture:--- Start of test: nreaders=7 nfakewriters=4 stat_interval=15 verbose=1 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4 shutdown_secs=60 stall_cpu=0 stall_cpu_holdoff=10 stall_cpu_irqsoff=0 stall_cpu_block=0 n_barrier_cbs=4 onoff_interval=1000 onoff_holdoff=30 read_exit_delay=13 read_exit_burst=16 nocbs_nthreads=8 nocbs_toggle=1000 test_nmis=0
[ 1.249266] rcu: Start-test grace-period state: g-1132 f0x0
[ 1.250228] rcu_torture_write_types: Testing conditional GPs.
[ 1.251188] rcu_torture_write_types: Testing conditional expedited GPs.
[ 1.252332] rcu_torture_write_types: Testing conditional full-state GPs.
[ 1.253348] rcu_torture_write_types: Testing expedited GPs.
[ 1.254243] rcu_torture_write_types: Testing asynchronous GPs.
[ 1.255255] rcu_torture_write_types: Testing polling GPs.
[ 1.256169] rcu_torture_write_types: Testing polling full-state GPs.
[ 1.257358] rcu_torture_write_types: Testing polling expedited GPs.
[ 1.258459] rcu_torture_write_types: Testing polling full-state expedited GPs.
[ 1.259657] rcu_torture_write_types: Testing normal GPs.
[ 1.260552] rcu-torture: Creating rcu_torture_writer task
[ 1.261552] rcu-torture: Creating rcu_torture_fakewriter task
[ 1.261576] rcu-torture: rcu_torture_writer task started
[ 1.262589] rcu-torture: Creating rcu_torture_fakewriter task
[ 1.262610] rcu-torture: rcu_torture_fakewriter task started
[ 1.263378] rcu-torture: GP expediting controlled from boot/sysfs for rcu.
[ 1.266709] rcu-torture: Creating rcu_torture_fakewriter task
[ 1.266723] rcu-torture: rcu_torture_fakewriter task started
[ 1.267745] rcu-torture: Creating rcu_torture_fakewriter task
[ 1.267758] rcu-torture: rcu_torture_fakewriter task started
[ 1.270570] rcu-torture: Creating rcu_torture_reader task
[ 1.270586] rcu-torture: rcu_torture_fakewriter task started
[ 1.271507] rcu-torture: Creating rcu_torture_reader task
[ 1.271529] rcu-torture: rcu_torture_reader task started
[ 1.274428] rcu-torture: Creating rcu_torture_reader task
[ 1.274435] rcu-torture: rcu_torture_reader task started
[ 1.275442] rcu-torture: Creating rcu_torture_reader task
[ 1.275450] rcu-torture: rcu_torture_reader task started
[ 1.278810] rcu-torture: Creating rcu_torture_reader task
[ 1.278821] rcu-torture: rcu_torture_reader task started
[ 1.280057] rcu-torture: Creating rcu_torture_reader task
[ 1.280066] rcu-torture: rcu_torture_reader task started
[ 1.283437] rcu-torture: Creating rcu_torture_reader task
[ 1.283451] rcu-torture: rcu_torture_reader task started
[ 1.284658] rcu-torture: Creating rcu_nocb_toggle task
[ 1.284667] rcu-torture: rcu_torture_reader task started
[ 1.287866] rcu-torture: Creating rcu_nocb_toggle task
[ 1.288980] rcu-torture: rcu_nocb_toggle task started
[ 1.290115] rcu-torture: Creating rcu_nocb_toggle task
[ 1.291204] rcu-torture: rcu_nocb_toggle task started
[ 1.292316] rcu-torture: Creating rcu_nocb_toggle task
[ 1.292437] rcu-torture: rcu_nocb_toggle task started
[ 1.295340] rcu-torture: Creating rcu_nocb_toggle task
[ 1.295343] rcu-torture: rcu_nocb_toggle task started
[ 1.296519] rcu-torture: Creating rcu_nocb_toggle task
[ 1.296531] rcu-torture: rcu_nocb_toggle task started
[ 1.299621] rcu-torture: Creating rcu_nocb_toggle task
[ 1.299637] rcu-torture: rcu_nocb_toggle task started
[ 1.301843] rcu-torture: Creating rcu_nocb_toggle task
[ 1.303013] rcu-torture: Creating rcu_torture_stats task
[ 1.303025] rcu-torture: rcu_nocb_toggle task started
[ 1.304192] rcu-torture: rcu_nocb_toggle task started
[ 1.304238] rcu-torture: Creating torture_shuffle task
[ 1.304242] rcu-torture: rcu_torture_stats task started
[ 1.304273] rcu-torture: Creating torture_stutter task
[ 1.304762] rcu-torture: Creating torture_shutdown task
[ 1.304765] rcu-torture: torture_stutter task started
[ 1.304801] rcu-torture: Creating torture_onoff task
[ 1.304803] rcu-torture: torture_shutdown task started
[ 1.304805] rcu-torture:torture_shutdown task: 59999 ms remaining
[ 1.304822] rcu-torture: torture_shuffle task started
[ 1.304839] rcu-torture: Creating rcu_torture_barrier_cbs task
[ 1.304843] rcu-torture: torture_onoff task started
[ 1.305122] rcu-torture: Creating rcu_torture_barrier_cbs task
[ 1.305132] rcu-torture: rcu_torture_barrier_cbs task started
[ 1.318197] rcu-torture: Creating rcu_torture_barrier_cbs task
[ 1.318200] rcu-torture: rcu_torture_barrier_cbs task started
[ 1.319414] rcu-torture: Creating rcu_torture_barrier_cbs task
[ 1.319416] rcu-torture: rcu_torture_barrier_cbs task started
[ 1.322625] rcu-torture: Creating rcu_torture_barrier task
[ 1.322635] rcu-torture: rcu_torture_barrier_cbs task started
[ 1.323700] rcu-torture: Creating rcu_torture_read_exit task
[ 1.323712] rcu-torture: rcu_torture_barrier task starting
[ 1.327003] initcall rcu_torture_init+0x0/0x1b40 returned 0 after 86918 usecs
[ 1.327014] rcu-torture: rcu_torture_read_exit: Start of test
[ 1.328314] calling proc_modules_init+0x0/0x30 @ 1
[ 1.328328] #8
[ 1.329198] rcu-torture: rcu_torture_read_exit: Start of episode
[ 1.330063] initcall proc_modules_init+0x0/0x30 returned 0 after 6 usecs
[ 1.332507] calling timer_sysctl_init+0x0/0x30 @ 1
[ 1.333358] initcall timer_sysctl_init+0x0/0x30 returned 0 after 3 usecs
[ 1.334527] calling timekeeping_init_ops+0x0/0x20 @ 1
[ 1.335413] initcall timekeeping_init_ops+0x0/0x20 returned 0 after 0 usecs
[ 1.336587] calling init_clocksource_sysfs+0x0/0x30 @ 1
[ 1.337476] initcall init_clocksource_sysfs+0x0/0x30 returned 0 after 33 usecs
[ 1.338626] calling init_timer_list_procfs+0x0/0x40 @ 1
[ 1.339508] initcall init_timer_list_procfs+0x0/0x40 returned 0 after 11 usecs
[ 0.119986] smpboot: CPU 8 Converting physical 0 to logical die 8
[ 1.340683] calling alarmtimer_init+0x0/0xf0 @ 1
[ 1.342735] initcall alarmtimer_init+0x0/0xf0 returned 0 after 126 usecs
[ 1.363889] calling init_posix_timers+0x0/0x30 @ 1
[ 1.364721] initcall init_posix_timers+0x0/0x30 returned 0 after 1 usecs
[ 1.365841] calling clockevents_init_sysfs+0x0/0xe0 @ 1
[ 1.366953] initcall clockevents_init_sysfs+0x0/0xe0 returned 0 after 265 usecs
[ 1.368047] calling proc_dma_init+0x0/0x30 @ 1
[ 1.368770] initcall proc_dma_init+0x0/0x30 returned 0 after 1 usecs
[ 1.369925] calling kallsyms_init+0x0/0x30 @ 1
[ 1.370797] initcall kallsyms_init+0x0/0x30 returned 0 after 1 usecs
[ 1.371813] calling pid_namespaces_init+0x0/0x50 @ 1
[ 1.372666] initcall pid_namespaces_init+0x0/0x50 returned 0 after 5 usecs
[ 1.373754] calling audit_watch_init+0x0/0x50 @ 1
[ 1.374522] initcall audit_watch_init+0x0/0x50 returned 0 after 3 usecs
[ 1.375567] calling audit_fsnotify_init+0x0/0x50 @ 1
[ 1.376440] #9
[ 1.376441] initcall audit_fsnotify_init+0x0/0x50 returned 0 after 0 usecs
[ 1.377825] calling audit_tree_init+0x0/0x80 @ 1
[ 1.378599] initcall audit_tree_init+0x0/0x80 returned 0 after 6 usecs
[ 1.379595] calling seccomp_sysctl_init+0x0/0x30 @ 1
[ 1.380372] initcall seccomp_sysctl_init+0x0/0x30 returned 0 after 4 usecs
[ 1.381412] calling utsname_sysctl_init+0x0/0x30 @ 1
[ 1.382225] initcall utsname_sysctl_init+0x0/0x30 returned 0 after 3 usecs
[ 1.383387] calling init_tracepoints+0x0/0x40 @ 1
[ 1.384178] initcall init_tracepoints+0x0/0x40 returned 0 after 0 usecs
[ 1.385213] calling init_blk_tracer+0x0/0x70 @ 1
[ 1.386039] initcall init_blk_tracer+0x0/0x70 returned 0 after 12 usecs
[ 1.387075] calling perf_event_sysfs_init+0x0/0xa0 @ 1
[ 0.119986] smpboot: CPU 9 Converting physical 0 to logical die 9
[ 1.387932] initcall perf_event_sysfs_init+0x0/0xa0 returned 0 after 53 usecs
[ 1.390409] calling system_trusted_keyring_init+0x0/0x70 @ 1
[ 1.411304] Initialise system trusted keyrings
[ 1.412128] initcall system_trusted_keyring_init+0x0/0x70 returned 0 after 827 usecs
[ 1.413354] calling kswapd_init+0x0/0x70 @ 1
[ 1.414182] initcall kswapd_init+0x0/0x70 returned 0 after 52 usecs
[ 1.415215] calling extfrag_debug_init+0x0/0x60 @ 1
[ 1.416041] initcall extfrag_debug_init+0x0/0x60 returned 0 after 5 usecs
[ 1.417109] calling mm_compute_batch_init+0x0/0x20 @ 1
[ 1.417925] initcall mm_compute_batch_init+0x0/0x20 returned 0 after 0 usecs
[ 1.419041] calling slab_proc_init+0x0/0x30 @ 1
[ 1.419791] initcall slab_proc_init+0x0/0x30 returned 0 after 1 usecs
[ 1.420861] calling workingset_init+0x0/0xc0 @ 1
[ 1.421654] workingset: timestamp_bits=52 max_order=17 bucket_order=0
[ 1.422661] initcall workingset_init+0x0/0xc0 returned 0 after 1007 usecs
[ 1.423795] #10
[ 1.423796] calling proc_vmalloc_init+0x0/0x40 @ 1
[ 1.424878] initcall proc_vmalloc_init+0x0/0x40 returned 0 after 1 usecs
[ 1.425898] calling slab_debugfs_init+0x0/0x70 @ 1
[ 1.426649] initcall slab_debugfs_init+0x0/0x70 returned 0 after 5 usecs
[ 1.427627] calling procswaps_init+0x0/0x30 @ 1
[ 1.428290] initcall procswaps_init+0x0/0x30 returned 0 after 1 usecs
[ 1.429267] calling fcntl_init+0x0/0x30 @ 1
[ 1.429922] initcall fcntl_init+0x0/0x30 returned 0 after 0 usecs
[ 1.430846] calling proc_filesystems_init+0x0/0x30 @ 1
[ 1.431648] initcall proc_filesystems_init+0x0/0x30 returned 0 after 0 usecs
[ 1.432740] calling start_dirtytime_writeback+0x0/0x30 @ 1
[ 1.433614] initcall start_dirtytime_writeback+0x0/0x30 returned 0 after 0 usecs
[ 1.434840] calling dio_init+0x0/0x30 @ 1
[ 0.119986] smpboot: CPU 10 Converting physical 0 to logical die 10
[ 1.435475] initcall dio_init+0x0/0x30 returned 0 after 0 usecs
[ 1.437617] calling dnotify_init+0x0/0xa0 @ 1
[ 1.458324] initcall dnotify_init+0x0/0xa0 returned 0 after 5 usecs
[ 1.459515] calling aio_setup+0x0/0xa0 @ 1
[ 1.460284] initcall aio_setup+0x0/0xa0 returned 0 after 36 usecs
[ 1.461382] calling mbcache_init+0x0/0x40 @ 1
[ 1.462203] initcall mbcache_init+0x0/0x40 returned 0 after 14 usecs
[ 1.463314] calling init_grace+0x0/0x10 @ 1
[ 1.464069] initcall init_grace+0x0/0x10 returned 0 after 1 usecs
[ 1.465246] calling init_v2_quota_format+0x0/0x30 @ 1
[ 1.466204] initcall init_v2_quota_format+0x0/0x30 returned 0 after 3 usecs
[ 1.467298] calling init_devpts_fs+0x0/0x40 @ 1
[ 1.468031] initcall init_devpts_fs+0x0/0x40 returned 0 after 5 usecs
[ 1.469415] calling ext4_init_fs+0x0/0x1f0 @ 1
[ 1.470332] #11
[ 1.470426] initcall ext4_init_fs+0x0/0x1f0 returned 0 after 92 usecs
[ 1.471946] calling journal_init+0x0/0x150 @ 1
[ 1.472746] initcall journal_init+0x0/0x150 returned 0 after 13 usecs
[ 1.473772] calling init_fat_fs+0x0/0x50 @ 1
[ 1.474475] initcall init_fat_fs+0x0/0x50 returned 0 after 19 usecs
[ 1.475424] calling init_vfat_fs+0x0/0x10 @ 1
[ 1.476091] initcall init_vfat_fs+0x0/0x10 returned 0 after 0 usecs
[ 1.477062] calling init_msdos_fs+0x0/0x10 @ 1
[ 1.477769] initcall init_msdos_fs+0x0/0x10 returned 0 after 0 usecs
[ 1.478780] calling init_iso9660_fs+0x0/0x90 @ 1
[ 1.479542] initcall init_iso9660_fs+0x0/0x90 returned 0 after 14 usecs
[ 1.480707] calling init_nfs_fs+0x0/0x160 @ 1
[ 0.119986] smpboot: CPU 11 Converting physical 0 to logical die 11
[ 1.504533] initcall init_nfs_fs+0x0/0x160 returned 0 after 22880 usecs
[ 1.505752] calling init_nfs_v2+0x0/0x20 @ 1
[ 1.506522] initcall init_nfs_v2+0x0/0x20 returned 0 after 2 usecs
[ 1.507607] calling init_nfs_v3+0x0/0x20 @ 1
[ 1.508388] initcall init_nfs_v3+0x0/0x20 returned 0 after 0 usecs
[ 1.509458] calling init_nfs_v4+0x0/0x60 @ 1
[ 1.510323] NFS: Registering the id_resolver key type
[ 1.511265] Key type id_resolver registered
[ 1.512032] Key type id_legacy registered
[ 1.512768] #12
[ 1.512771] initcall init_nfs_v4+0x0/0x60 returned 0 after 2451 usecs
[ 1.514212] calling init_nlm+0x0/0x70 @ 1
[ 1.514906] initcall init_nlm+0x0/0x70 returned 0 after 7 usecs
[ 1.515926] calling init_nls_cp437+0x0/0x20 @ 1
[ 1.516743] initcall init_nls_cp437+0x0/0x20 returned 0 after 2 usecs
[ 1.517825] calling init_nls_ascii+0x0/0x20 @ 1
[ 1.518614] initcall init_nls_ascii+0x0/0x20 returned 0 after 0 usecs
[ 1.519696] calling init_nls_iso8859_1+0x0/0x20 @ 1
[ 1.520529] initcall init_nls_iso8859_1+0x0/0x20 returned 0 after 0 usecs
[ 1.521743] calling init_nls_utf8+0x0/0x30 @ 1
[ 1.522505] initcall init_nls_utf8+0x0/0x30 returned 0 after 0 usecs
[ 1.523569] calling init_autofs_fs+0x0/0x40 @ 1
[ 0.119986] smpboot: CPU 12 Converting physical 0 to logical die 12
[ 1.524419] initcall init_autofs_fs+0x0/0x40 returned 0 after 67 usecs
[ 1.528286] calling init_v9fs+0x0/0x100 @ 1
[ 1.549048] 9p: Installing v9fs 9p2000 file system support
[ 1.550014] initcall init_v9fs+0x0/0x100 returned 0 after 966 usecs
[ 1.551067] calling ipc_init+0x0/0x30 @ 1
[ 1.551784] initcall ipc_init+0x0/0x30 returned 0 after 26 usecs
[ 1.552797] calling ipc_sysctl_init+0x0/0x40 @ 1
[ 1.553613] initcall ipc_sysctl_init+0x0/0x40 returned 0 after 11 usecs
[ 1.554786] calling init_mqueue_fs+0x0/0x110 @ 1
[ 1.555693] initcall init_mqueue_fs+0x0/0x110 returned 0 after 48 usecs
[ 1.556877] calling key_proc_init+0x0/0x70 @ 1
[ 1.557654] initcall key_proc_init+0x0/0x70 returned 0 after 1 usecs
[ 1.558724] calling selinux_nf_ip_init+0x0/0x40 @ 1
[ 1.559561] initcall selinux_nf_ip_init+0x0/0x40 returned 0 after 0 usecs
[ 1.560701] calling init_sel_fs+0x0/0x130 @ 1
[ 1.561468] initcall init_sel_fs+0x0/0x130 returned 0 after 0 usecs
[ 1.561468] #13
[ 1.562532] calling selnl_init+0x0/0xb0 @ 1
[ 1.563576] initcall selnl_init+0x0/0xb0 returned 0 after 4 usecs
[ 1.564552] calling sel_netif_init+0x0/0x40 @ 1
[ 1.565326] initcall sel_netif_init+0x0/0x40 returned 0 after 0 usecs
[ 1.566406] calling sel_netnode_init+0x0/0x40 @ 1
[ 1.567214] initcall sel_netnode_init+0x0/0x40 returned 0 after 0 usecs
[ 1.568312] calling sel_netport_init+0x0/0x40 @ 1
[ 1.569197] initcall sel_netport_init+0x0/0x40 returned 0 after 0 usecs
[ 1.570366] calling aurule_init+0x0/0x30 @ 1
[ 1.571103] initcall aurule_init+0x0/0x30 returned 0 after 0 usecs
[ 1.572140] calling jent_mod_init+0x0/0xe0 @ 1
[ 0.119986] smpboot: CPU 13 Converting physical 0 to logical die 13
[ 1.604960] initcall jent_mod_init+0x0/0xe0 returned 0 after 32055 usecs
[ 1.606087] calling asymmetric_key_init+0x0/0x10 @ 1
[ 1.606950] Key type asymmetric registered
[ 1.606951] #14
[ 1.607578] initcall asymmetric_key_init+0x0/0x10 returned 0 after 629 usecs
[ 1.609120] calling x509_key_init+0x0/0x10 @ 1
[ 1.609825] Asymmetric key parser 'x509' registered
[ 1.610576] initcall x509_key_init+0x0/0x10 returned 0 after 753 usecs
[ 1.611596] calling blkdev_init+0x0/0x20 @ 1
[ 0.119986] smpboot: CPU 14 Converting physical 0 to logical die 14
[ 1.641542] initcall blkdev_init+0x0/0x20 returned 0 after 29214 usecs
[ 1.642700] calling proc_genhd_init+0x0/0x50 @ 1
[ 1.643488] initcall proc_genhd_init+0x0/0x50 returned 0 after 2 usecs
[ 1.644494] calling bsg_init+0x0/0xa0 @ 1
[ 1.645222] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.646467] initcall bsg_init+0x0/0xa0 returned 0 after 1262 usecs
[ 1.647527] calling ioprio_init+0x0/0x10 @ 1
[ 1.648289] initcall ioprio_init+0x0/0x10 returned 0 after 19 usecs
[ 1.649343] calling iolatency_init+0x0/0x10 @ 1
[ 1.650115] initcall iolatency_init+0x0/0x10 returned 0 after 0 usecs
[ 1.651097] calling ioc_init+0x0/0x10 @ 1
[ 1.651727] initcall ioc_init+0x0/0x10 returned 0 after 4 usecs
[ 1.652717] calling deadline_init+0x0/0x10 @ 1
[ 1.653561] #15
[ 1.653567] io scheduler mq-deadline registered
[ 1.654600] initcall deadline_init+0x0/0x10 returned 0 after 1036 usecs
[ 1.655669] calling kyber_init+0x0/0x10 @ 1
[ 1.656396] io scheduler kyber registered
[ 1.657012] initcall kyber_init+0x0/0x10 returned 0 after 616 usecs
[ 1.658071] calling io_uring_init+0x0/0x80 @ 1
[ 1.658842] initcall io_uring_init+0x0/0x80 returned 0 after 16 usecs
[ 1.659819] calling blake2s_mod_init+0x0/0x10 @ 1
[ 1.660551] initcall blake2s_mod_init+0x0/0x10 returned 0 after 0 usecs
[ 1.661582] calling percpu_counter_startup+0x0/0x70 @ 1
[ 0.119986] smpboot: CPU 15 Converting physical 0 to logical die 15
[ 1.689757] #16
[ 0.119986] smpboot: CPU 16 Converting physical 0 to logical die 16
[ 1.724809] initcall percpu_counter_startup+0x0/0x70 returned 0 after 62300 usecs
[ 1.726120] calling pcie_portdrv_init+0x0/0x40 @ 1
[ 1.726976] initcall pcie_portdrv_init+0x0/0x40 returned 0 after 16 usecs
[ 1.728066] calling pci_proc_init+0x0/0x80 @ 1
[ 1.728843] initcall pci_proc_init+0x0/0x80 returned 0 after 10 usecs
[ 1.729912] calling pci_hotplug_init+0x0/0x10 @ 1
[ 1.730772] initcall pci_hotplug_init+0x0/0x10 returned 0 after 0 usecs
[ 1.731903] calling ged_driver_init+0x0/0x20 @ 1
[ 1.732715] initcall ged_driver_init+0x0/0x20 returned 0 after 11 usecs
[ 1.733862] calling acpi_ac_init+0x0/0x50 @ 1
[ 1.734618] initcall acpi_ac_init+0x0/0x50 returned 0 after 27 usecs
[ 1.735634] calling acpi_button_driver_init+0x0/0x60 @ 1
[ 1.736728] #17
[ 1.736808] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.742029] ACPI: button: Power Button [PWRF]
[ 1.742840] probe of LNXPWRBN:00 returned 0 after 6085 usecs
[ 1.744023] initcall acpi_button_driver_init+0x0/0x60 returned 0 after 7291 usecs
[ 1.745628] calling acpi_fan_driver_init+0x0/0x20 @ 1
[ 1.746752] initcall acpi_fan_driver_init+0x0/0x20 returned 0 after 7 usecs
[ 0.119986] smpboot: CPU 17 Converting physical 0 to logical die 17
[ 1.748087] calling acpi_video_init+0x0/0xc0 @ 1
[ 1.754442] initcall acpi_video_init+0x0/0xc0 returned 0 after 4299 usecs
[ 1.775767] calling acpi_processor_driver_init+0x0/0xc0 @ 1
[ 1.777382] #18
[ 0.119986] smpboot: CPU 18 Converting physical 0 to logical die 18
[ 1.812468] probe of cpu0 returned 0 after 35546 usecs
[ 1.813374] probe of cpu1 returned 0 after 20 usecs
[ 1.814172] probe of cpu2 returned 0 after 15 usecs
[ 1.815023] probe of cpu3 returned 0 after 40 usecs
[ 1.815783] probe of cpu4 returned 0 after 16 usecs
[ 1.816578] probe of cpu5 returned 0 after 16 usecs
[ 1.817413] probe of cpu6 returned 0 after 17 usecs
[ 1.818227] probe of cpu7 returned 0 after 14 usecs
[ 1.818983] probe of cpu8 returned 0 after 14 usecs
[ 1.819754] probe of cpu9 returned 0 after 16 usecs
[ 1.820516] probe of cpu10 returned 0 after 21 usecs
[ 1.821283] probe of cpu11 returned 0 after 14 usecs
[ 1.822147] probe of cpu12 returned 0 after 17 usecs
[ 1.823026] probe of cpu13 returned 0 after 22 usecs
[ 1.823854] probe of cpu14 returned 0 after 15 usecs
[ 1.824647] probe of cpu15 returned 0 after 16 usecs
[ 1.825429] probe of cpu16 returned 0 after 16 usecs
[ 1.826202] probe of cpu17 returned 0 after 14 usecs
[ 1.826980] probe of cpu18 returned 0 after 15 usecs
[ 1.834883] #19
[ 0.119986] smpboot: CPU 19 Converting physical 0 to logical die 19
[ 1.869891] #20
[ 0.119986] smpboot: CPU 20 Converting physical 0 to logical die 20
[ 1.905149] #21
[ 0.119986] smpboot: CPU 21 Converting physical 0 to logical die 21
[ 1.944539] probe of cpu19 returned 0 after 75178 usecs
[ 1.945461] probe of cpu20 returned 0 after 22 usecs
[ 1.946314] probe of cpu21 returned 0 after 19 usecs
[ 1.967152] #22
[ 0.119986] smpboot: CPU 22 Converting physical 0 to logical die 22
[ 2.002644] #23
[ 0.119986] smpboot: CPU 23 Converting physical 0 to logical die 23
[ 2.051157] #24
[ 0.119986] smpboot: CPU 24 Converting physical 0 to logical die 24
[ 2.087237] probe of cpu22 returned 0 after 85068 usecs
[ 2.088232] probe of cpu23 returned 0 after 31 usecs
[ 2.089261] probe of cpu24 returned 0 after 26 usecs
[ 2.109882] #25
[ 0.119986] smpboot: CPU 25 Converting physical 0 to logical die 25
[ 2.145927] #26
[ 0.119986] smpboot: CPU 26 Converting physical 0 to logical die 26
[ 2.181549] probe of cpu25 returned 0 after 36219 usecs
[ 2.182533] probe of cpu26 returned 0 after 27 usecs
[ 2.204052] #27
[ 0.119986] smpboot: CPU 27 Converting physical 0 to logical die 27
[ 2.245710] #28
[ 0.119986] smpboot: CPU 28 Converting physical 0 to logical die 28
[ 2.282784] #29
[ 0.119986] smpboot: CPU 29 Converting physical 0 to logical die 29
[ 2.321873] probe of cpu27 returned 0 after 76792 usecs
[ 2.322851] probe of cpu28 returned 0 after 27 usecs
[ 2.323734] probe of cpu29 returned 0 after 23 usecs
[ 2.343817] #30
[ 0.119986] smpboot: CPU 30 Converting physical 0 to logical die 30
[ 2.379722] #31
[ 0.119986] smpboot: CPU 31 Converting physical 0 to logical die 31
[ 2.416843] #32
[ 0.119986] smpboot: CPU 32 Converting physical 0 to logical die 32
[ 2.457460] probe of cpu30 returned 0 after 78260 usecs
[ 2.458525] probe of cpu31 returned 0 after 41 usecs
[ 2.459518] probe of cpu32 returned 0 after 35 usecs
[ 2.479817] #33
[ 0.119986] smpboot: CPU 33 Converting physical 0 to logical die 33
[ 2.515571] #34
[ 0.119986] smpboot: CPU 34 Converting physical 0 to logical die 34
[ 2.555669] probe of cpu33 returned 0 after 40747 usecs
[ 2.556802] probe of cpu34 returned 0 after 38 usecs
[ 2.577815] #35
[ 0.119986] smpboot: CPU 35 Converting physical 0 to logical die 35
[ 2.614164] #36
[ 0.119986] smpboot: CPU 36 Converting physical 0 to logical die 36
[ 2.658400] probe of cpu35 returned 0 after 44827 usecs
[ 2.659268] probe of cpu36 returned 0 after 23 usecs
[ 2.680713] #37
[ 0.119986] smpboot: CPU 37 Converting physical 0 to logical die 37
[ 2.721218] #38
[ 0.119986] smpboot: CPU 38 Converting physical 0 to logical die 38
[ 2.760057] probe of cpu37 returned 0 after 39383 usecs
[ 2.760972] probe of cpu38 returned 0 after 23 usecs
[ 2.782873] #39
[ 0.119986] smpboot: CPU 39 Converting physical 0 to logical die 39
[ 2.827236] #40
[ 0.119986] smpboot: CPU 40 Converting physical 0 to logical die 40
[ 2.868408] probe of cpu39 returned 0 after 41743 usecs
[ 2.869333] probe of cpu40 returned 0 after 22 usecs
[ 2.890832] #41
[ 0.119986] smpboot: CPU 41 Converting physical 0 to logical die 41
[ 2.929625] #42
[ 0.119986] smpboot: CPU 42 Converting physical 0 to logical die 42
[ 2.966619] rcu-torture: torture_onoff begin holdoff
[ 2.966667] probe of cpu41 returned 0 after 37639 usecs
[ 2.968409] probe of cpu42 returned 0 after 28 usecs
[ 2.969217] initcall acpi_processor_driver_init+0x0/0xc0 returned 0 after 1192306 usecs
[ 2.970492] calling acpi_thermal_init+0x0/0x80 @ 1
[ 2.971520] initcall acpi_thermal_init+0x0/0x80 returned 0 after 251 usecs
[ 2.972617] calling acpi_battery_init+0x0/0x40 @ 1
[ 2.973390] initcall acpi_battery_init+0x0/0x40 returned 0 after 2 usecs
[ 2.974484] calling bgrt_init+0x0/0xd0 @ 1
[ 2.975162] initcall bgrt_init+0x0/0xd0 returned -19 after 0 usecs
[ 2.976163] calling virtio_pci_driver_init+0x0/0x20 @ 1
[ 2.977018] initcall virtio_pci_driver_init+0x0/0x20 returned 0 after 9 usecs
[ 2.978176] calling virtio_input_driver_init+0x0/0x10 @ 1
[ 2.979055] initcall virtio_input_driver_init+0x0/0x10 returned 0 after 10 usecs
[ 2.980230] calling n_null_init+0x0/0x20 @ 1
[ 2.980923] initcall n_null_init+0x0/0x20 returned 0 after 2 usecs
[ 2.981893] calling pty_init+0x0/0x230 @ 1
[ 2.982709] initcall pty_init+0x0/0x230 returned 0 after 144 usecs
[ 2.983692] calling sysrq_init+0x0/0x70 @ 1
[ 2.984373] initcall sysrq_init+0x0/0x70 returned 0 after 3 usecs
[ 2.985374] calling serial8250_init+0x0/0x1e0 @ 1
[ 2.986181] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.987227] probe of 00:04:0 returned 0 after 3 usecs
[ 2.988062] probe of 00:04:0.0 returned 0 after 2 usecs
[ 2.989073] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.990366] probe of 00:04 returned 0 after 3162 usecs
[ 2.991183] probe of serial8250:0 returned 0 after 1 usecs
[ 2.992029] probe of serial8250:0.1 returned 0 after 1 usecs
[ 2.993069] probe of serial8250:0.2 returned 0 after 1 usecs
[ 2.994021] probe of serial8250:0.3 returned 0 after 1 usecs
[ 2.994955] probe of serial8250 returned 0 after 2 usecs
[ 2.995776] initcall serial8250_init+0x0/0x1e0 returned 0 after 9594 usecs
[ 2.996840] calling exar_pci_driver_init+0x0/0x20 @ 1
[ 2.997628] initcall exar_pci_driver_init+0x0/0x20 returned 0 after 5 usecs
[ 2.998681] calling lpss8250_pci_driver_init+0x0/0x20 @ 1
[ 2.999522] initcall lpss8250_pci_driver_init+0x0/0x20 returned 0 after 3 usecs
[ 3.000631] calling mid8250_pci_driver_init+0x0/0x20 @ 1
[ 3.001452] initcall mid8250_pci_driver_init+0x0/0x20 returned 0 after 3 usecs
[ 3.002648] calling serial_pci_driver_init+0x0/0x20 @ 1
[ 3.003546] initcall serial_pci_driver_init+0x0/0x20 returned 0 after 7 usecs
[ 3.004629] calling pericom8250_pci_driver_init+0x0/0x20 @ 1
[ 3.005520] initcall pericom8250_pci_driver_init+0x0/0x20 returned 0 after 5 usecs
[ 3.006690] calling random_sysctls_init+0x0/0x30 @ 1
[ 3.007462] initcall random_sysctls_init+0x0/0x30 returned 0 after 4 usecs
[ 3.008505] calling virtio_console_init+0x0/0xe0 @ 1
[ 3.009362] initcall virtio_console_init+0x0/0xe0 returned 0 after 14 usecs
[ 3.010454] calling hpet_init+0x0/0x90 @ 1
[ 3.011272] probe of PNP0103:00 returned 19 after 24 usecs
[ 3.012135] initcall hpet_init+0x0/0x90 returned 0 after 1038 usecs
[ 3.013088] calling nvram_module_init+0x0/0x90 @ 1
[ 3.013955] Non-volatile memory driver v1.3
[ 3.014604] initcall nvram_module_init+0x0/0x90 returned 0 after 765 usecs
[ 3.015647] calling via_rng_mod_init+0x0/0x60 @ 1
[ 3.016351] initcall via_rng_mod_init+0x0/0x60 returned -19 after 0 usecs
[ 3.017396] calling agp_init+0x0/0x30 @ 1
[ 3.018061] Linux agpgart interface v0.103
[ 3.018711] initcall agp_init+0x0/0x30 returned 0 after 649 usecs
[ 3.019670] calling agp_amd64_mod_init+0x0/0x10 @ 1
[ 3.020434] initcall agp_amd64_mod_init+0x0/0x10 returned -19 after 9 usecs
[ 3.021504] calling agp_intel_init+0x0/0x30 @ 1
[ 3.022246] probe of 0000:00:00.0 returned 19 after 34 usecs
[ 3.023109] initcall agp_intel_init+0x0/0x30 returned 0 after 898 usecs
[ 3.024113] calling drm_core_init+0x0/0xc0 @ 1
[ 3.024931] ACPI: bus type drm_connector registered
[ 3.025814] initcall drm_core_init+0x0/0xc0 returned 0 after 894 usecs
[ 3.026806] calling drm_buddy_module_init+0x0/0x40 @ 1
[ 3.027602] initcall drm_buddy_module_init+0x0/0x40 returned 0 after 2 usecs
[ 3.028690] calling drm_display_helper_module_init+0x0/0x10 @ 1
[ 3.029613] initcall drm_display_helper_module_init+0x0/0x10 returned 0 after 0 usecs
[ 3.030740] calling i915_init+0x0/0xb0 @ 1
[ 3.031412] initcall i915_init+0x0/0xb0 returned 0 after 37 usecs
[ 3.032339] calling virtio_gpu_driver_init+0x0/0x10 @ 1
[ 3.033178] initcall virtio_gpu_driver_init+0x0/0x10 returned 0 after 3 usecs
[ 3.034269] calling cn_proc_init+0x0/0x50 @ 1
[ 3.034965] initcall cn_proc_init+0x0/0x50 returned 0 after 0 usecs
[ 3.035920] calling topology_sysfs_init+0x0/0x30 @ 1
[ 3.036896] initcall topology_sysfs_init+0x0/0x30 returned 0 after 203 usecs
[ 3.037989] calling cacheinfo_sysfs_init+0x0/0x30 @ 1
[ 3.042622] initcall cacheinfo_sysfs_init+0x0/0x30 returned 0 after 3898 usecs
[ 3.043784] calling loop_init+0x0/0xf0 @ 1
[ 3.047464] loop: module loaded
[ 3.047967] initcall loop_init+0x0/0xf0 returned 0 after 3502 usecs
[ 3.048928] calling virtio_blk_init+0x0/0x90 @ 1
[ 3.049677] initcall virtio_blk_init+0x0/0x90 returned 0 after 21 usecs
[ 3.050648] calling mei_init+0x0/0x90 @ 1
[ 3.051248] initcall mei_init+0x0/0x90 returned 0 after 7 usecs
[ 3.052181] calling mei_me_driver_init+0x0/0x20 @ 1
[ 3.053033] initcall mei_me_driver_init+0x0/0x20 returned 0 after 6 usecs
[ 3.054151] calling mac_hid_init+0x0/0x40 @ 1
[ 3.054822] initcall mac_hid_init+0x0/0x40 returned 0 after 2 usecs
[ 3.055714] calling spi_transport_init+0x0/0x90 @ 1
[ 3.056427] initcall spi_transport_init+0x0/0x90 returned 0 after 5 usecs
[ 3.057485] calling virtio_scsi_init+0x0/0xd0 @ 1
[ 3.058229] initcall virtio_scsi_init+0x0/0xd0 returned 0 after 7 usecs
[ 3.059175] calling init_sd+0x0/0x100 @ 1
[ 3.059825] initcall init_sd+0x0/0x100 returned 0 after 10 usecs
[ 3.060786] calling init_sr+0x0/0x60 @ 1
[ 3.061402] initcall init_sr+0x0/0x60 returned 0 after 2 usecs
[ 3.062290] calling init_sg+0x0/0x200 @ 1
[ 3.062982] initcall init_sg+0x0/0x200 returned 0 after 7 usecs
[ 3.063977] calling ahci_pci_driver_init+0x0/0x20 @ 1
[ 3.064885] ahci 0000:00:1f.2: version 3.0
[ 3.065696] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[ 3.067023] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[ 3.068298] ahci 0000:00:1f.2: flags: 64bit ncq only
[ 3.070493] scsi host0: ahci
[ 3.071157] scsi host1: ahci
[ 3.071760] scsi host2: ahci
[ 3.072419] scsi host3: ahci
[ 3.073074] scsi host4: ahci
[ 3.073724] scsi host5: ahci
[ 3.074237] ata1: SATA max UDMA/133 abar m4096@0xfebf1000 port 0xfebf1100 irq 24 lpm-pol 0
[ 3.075485] ata2: SATA max UDMA/133 abar m4096@0xfebf1000 port 0xfebf1180 irq 24 lpm-pol 0
[ 3.076703] ata3: SATA max UDMA/133 abar m4096@0xfebf1000 port 0xfebf1200 irq 24 lpm-pol 0
[ 3.077954] ata4: SATA max UDMA/133 abar m4096@0xfebf1000 port 0xfebf1280 irq 24 lpm-pol 0
[ 3.079202] ata5: SATA max UDMA/133 abar m4096@0xfebf1000 port 0xfebf1300 irq 24 lpm-pol 0
[ 3.080565] ata6: SATA max UDMA/133 abar m4096@0xfebf1000 port 0xfebf1380 irq 24 lpm-pol 0
[ 3.081963] probe of 0000:00:1f.2 returned 0 after 17088 usecs
[ 3.083098] initcall ahci_pci_driver_init+0x0/0x20 returned 0 after 18230 usecs
[ 3.084587] calling piix_init+0x0/0x30 @ 1
[ 3.085276] initcall piix_init+0x0/0x30 returned 0 after 8 usecs
[ 3.086250] calling amd_pci_driver_init+0x0/0x20 @ 1
[ 3.087039] initcall amd_pci_driver_init+0x0/0x20 returned 0 after 4 usecs
[ 3.088148] calling oldpiix_pci_driver_init+0x0/0x20 @ 1
[ 3.089063] initcall oldpiix_pci_driver_init+0x0/0x20 returned 0 after 3 usecs
[ 3.090178] calling sch_pci_driver_init+0x0/0x20 @ 1
[ 3.090946] initcall sch_pci_driver_init+0x0/0x20 returned 0 after 5 usecs
[ 3.091967] calling blackhole_netdev_init+0x0/0x80 @ 1
[ 3.092781] initcall blackhole_netdev_init+0x0/0x80 returned 0 after 16 usecs
[ 3.093888] calling fixed_mdio_bus_init+0x0/0x70 @ 1
[ 3.094730] initcall fixed_mdio_bus_init+0x0/0x70 returned 0 after 64 usecs
[ 3.095789] calling phy_module_init+0x0/0x20 @ 1
[ 3.096583] initcall phy_module_init+0x0/0x20 returned 0 after 45 usecs
[ 3.097589] calling virtio_net_driver_init+0x0/0xb0 @ 1
[ 3.098418] initcall virtio_net_driver_init+0x0/0xb0 returned 0 after 4 usecs
[ 3.099553] calling tg3_driver_init+0x0/0x20 @ 1
[ 3.100275] initcall tg3_driver_init+0x0/0x20 returned 0 after 4 usecs
[ 3.101266] calling e100_init_module+0x0/0x60 @ 1
[ 3.102004] e100: Intel(R) PRO/100 Network Driver
[ 3.102732] e100: Copyright(c) 1999-2006 Intel Corporation
[ 3.103607] initcall e100_init_module+0x0/0x60 returned 0 after 1602 usecs
[ 3.104787] calling e1000_init_module+0x0/0x80 @ 1
[ 3.105613] e1000: Intel(R) PRO/1000 Network Driver
[ 3.106388] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 3.107271] initcall e1000_init_module+0x0/0x80 returned 0 after 1657 usecs
[ 3.108376] calling e1000_init_module+0x0/0x40 @ 1
[ 3.109215] e1000e: Intel(R) PRO/1000 Network Driver
[ 3.110083] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 3.111085] initcall e1000_init_module+0x0/0x40 returned 0 after 1869 usecs
[ 3.112250] calling sky2_init_module+0x0/0x30 @ 1
[ 3.113038] sky2: driver version 1.30
[ 3.113600] initcall sky2_init_module+0x0/0x30 returned 0 after 562 usecs
[ 3.114678] calling forcedeth_pci_driver_init+0x0/0x20 @ 1
[ 3.115533] initcall forcedeth_pci_driver_init+0x0/0x20 returned 0 after 3 usecs
[ 3.116656] calling rtl8139_init_module+0x0/0x20 @ 1
[ 3.117416] initcall rtl8139_init_module+0x0/0x20 returned 0 after 4 usecs
[ 3.118465] calling rtl8169_pci_driver_init+0x0/0x20 @ 1
[ 3.119294] initcall rtl8169_pci_driver_init+0x0/0x20 returned 0 after 3 usecs
[ 3.120388] calling net_failover_init+0x0/0x10 @ 1
[ 3.121135] initcall net_failover_init+0x0/0x10 returned 0 after 0 usecs
[ 3.122157] calling cdrom_init+0x0/0x10 @ 1
[ 3.122875] initcall cdrom_init+0x0/0x10 returned 0 after 6 usecs
[ 3.123804] calling nonstatic_sysfs_init+0x0/0x10 @ 1
[ 3.124639] initcall nonstatic_sysfs_init+0x0/0x10 returned 0 after 0 usecs
[ 3.125667] calling yenta_cardbus_driver_init+0x0/0x20 @ 1
[ 3.126503] initcall yenta_cardbus_driver_init+0x0/0x20 returned 0 after 4 usecs
[ 3.127641] calling mon_init+0x0/0x140 @ 1
[ 3.128453] initcall mon_init+0x0/0x140 returned 0 after 160 usecs
[ 3.129645] calling ehci_hcd_init+0x0/0x80 @ 1
[ 3.130417] initcall ehci_hcd_init+0x0/0x80 returned 0 after 0 usecs
[ 3.131438] calling ehci_pci_init+0x0/0x60 @ 1
[ 3.132213] initcall ehci_pci_init+0x0/0x60 returned 0 after 8 usecs
[ 3.133242] calling ohci_hcd_mod_init+0x0/0x50 @ 1
[ 3.134036] initcall ohci_hcd_mod_init+0x0/0x50 returned 0 after 2 usecs
[ 3.135046] calling ohci_pci_init+0x0/0x60 @ 1
[ 3.135705] initcall ohci_pci_init+0x0/0x60 returned 0 after 7 usecs
[ 3.136616] calling uhci_hcd_init+0x0/0xb0 @ 1
[ 3.137272] initcall uhci_hcd_init+0x0/0xb0 returned 0 after 5 usecs
[ 3.138221] calling xhci_hcd_init+0x0/0x30 @ 1
[ 3.138921] initcall xhci_hcd_init+0x0/0x30 returned 0 after 1 usecs
[ 3.139886] calling xhci_pci_init+0x0/0x70 @ 1
[ 3.140595] initcall xhci_pci_init+0x0/0x70 returned 0 after 6 usecs
[ 3.141564] calling usblp_driver_init+0x0/0x20 @ 1
[ 3.142313] usbcore: registered new interface driver usblp
[ 3.143148] initcall usblp_driver_init+0x0/0x20 returned 0 after 840 usecs
[ 3.144188] calling usb_storage_driver_init+0x0/0x30 @ 1
[ 3.145014] usbcore: registered new interface driver usb-storage
[ 3.145921] initcall usb_storage_driver_init+0x0/0x30 returned 0 after 913 usecs
[ 3.147065] calling i8042_init+0x0/0x5d0 @ 1
[ 3.147766] probe of 00:01 returned 0 after 12 usecs
[ 3.148543] probe of 00:02 returned 0 after 3 usecs
[ 3.149296] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 3.151371] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.152174] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.152961] probe of i8042 returned 0 after 2421 usecs
[ 3.153800] initcall i8042_init+0x0/0x5d0 returned 0 after 6070 usecs
[ 3.154887] calling serport_init+0x0/0x40 @ 1
[ 3.155590] initcall serport_init+0x0/0x40 returned 0 after 0 usecs
[ 3.156556] calling input_leds_init+0x0/0x10 @ 1
[ 3.157288] initcall input_leds_init+0x0/0x10 returned 0 after 1 usecs
[ 3.158283] calling evdev_init+0x0/0x10 @ 1
[ 3.159095] initcall evdev_init+0x0/0x10 returned 0 after 158 usecs
[ 3.160082] calling atkbd_init+0x0/0x30 @ 1
[ 3.160779] initcall atkbd_init+0x0/0x30 returned 0 after 38 usecs
[ 3.161910] calling psmouse_init+0x0/0xa0 @ 1
[ 3.162756] initcall psmouse_init+0x0/0xa0 returned 0 after 135 usecs
[ 3.163806] calling cmos_init+0x0/0x90 @ 1
[ 3.164522] rtc_cmos 00:00: RTC can wake from S4
[ 3.165264] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 3.166755] probe of serio0 returned 0 after 6001 usecs
[ 3.167808] probe of alarmtimer.0.auto returned 0 after 4 usecs
[ 3.168266] probe of serio1 returned 19 after 400 usecs
[ 3.169148] rtc_cmos 00:00: registered as rtc0
[ 3.171811] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs
[ 3.174314] probe of 00:00 returned 0 after 9806 usecs
[ 3.175214] initcall cmos_init+0x0/0x90 returned 0 after 10739 usecs
[ 3.176360] calling smbalert_driver_init+0x0/0x20 @ 1
[ 3.177244] initcall smbalert_driver_init+0x0/0x20 returned 0 after 8 usecs
[ 3.178401] calling i801_driver_init+0x0/0xe0 @ 1
[ 3.179222] initcall i801_driver_init+0x0/0xe0 returned 0 after 16 usecs
[ 3.180340] calling ptp_kvm_init+0x0/0xe0 @ 1
[ 3.180968] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 3.181257] initcall ptp_kvm_init+0x0/0xe0 returned 0 after 94 usecs
[ 3.182217] i2c i2c-0: 1/1 memory slots populated (from DMI)
[ 3.183239] calling thermal_throttle_init_device+0x0/0x50 @ 1
[ 3.184155] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[ 3.185133] initcall thermal_throttle_init_device+0x0/0x50 returned 0 after 0 usecs
[ 3.186665] probe of 0000:00:1f.3 returned 0 after 6100 usecs
[ 3.187641] calling dm_init+0x0/0x80 @ 1
[ 3.189459] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
[ 3.190874] initcall dm_init+0x0/0x80 returned 0 after 1628 usecs
[ 3.191943] calling dm_mirror_init+0x0/0x70 @ 1
[ 3.192776] initcall dm_mirror_init+0x0/0x70 returned 0 after 21 usecs
[ 3.193889] calling dm_dirty_log_init+0x0/0x60 @ 1
[ 3.194717] initcall dm_dirty_log_init+0x0/0x60 returned 0 after 3 usecs
[ 3.195832] calling dm_zero_init+0x0/0x10 @ 1
[ 3.196585] initcall dm_zero_init+0x0/0x10 returned 0 after 0 usecs
[ 3.197632] calling intel_pstate_init+0x0/0x840 @ 1
[ 3.198525] intel_pstate: CPU model not supported
[ 3.199369] initcall intel_pstate_init+0x0/0x840 returned -19 after 845 usecs
[ 3.200649] calling haltpoll_init+0x0/0xf0 @ 1
[ 3.201465] initcall haltpoll_init+0x0/0xf0 returned -19 after 2 usecs
[ 3.202638] calling esrt_sysfs_init+0x0/0x300 @ 1
[ 3.203508] initcall esrt_sysfs_init+0x0/0x300 returned -38 after 0 usecs
[ 3.204644] calling hid_init+0x0/0x60 @ 1
[ 3.205424] hid: raw HID events driver (C) Jiri Kosina
[ 3.206334] initcall hid_init+0x0/0x60 returned 0 after 924 usecs
[ 3.207353] calling hid_generic_init+0x0/0x20 @ 1
[ 3.208182] initcall hid_generic_init+0x0/0x20 returned 0 after 10 usecs
[ 3.209408] calling a4_driver_init+0x0/0x20 @ 1
[ 3.210380] initcall a4_driver_init+0x0/0x20 returned 0 after 59 usecs
[ 3.211559] calling apple_driver_init+0x0/0x20 @ 1
[ 3.212398] initcall apple_driver_init+0x0/0x20 returned 0 after 4 usecs
[ 3.213602] calling belkin_driver_init+0x0/0x20 @ 1
[ 3.214432] initcall belkin_driver_init+0x0/0x20 returned 0 after 3 usecs
[ 3.215643] calling ch_driver_init+0x0/0x20 @ 1
[ 3.216468] initcall ch_driver_init+0x0/0x20 returned 0 after 5 usecs
[ 3.217729] calling ch_driver_init+0x0/0x20 @ 1
[ 3.218553] initcall ch_driver_init+0x0/0x20 returned 0 after 6 usecs
[ 3.219667] calling cp_driver_init+0x0/0x20 @ 1
[ 3.220484] initcall cp_driver_init+0x0/0x20 returned 0 after 6 usecs
[ 3.221607] calling ez_driver_init+0x0/0x20 @ 1
[ 3.222416] initcall ez_driver_init+0x0/0x20 returned 0 after 5 usecs
[ 3.223537] calling gyration_driver_init+0x0/0x20 @ 1
[ 3.224436] initcall gyration_driver_init+0x0/0x20 returned 0 after 5 usecs
[ 3.225778] calling ite_driver_init+0x0/0x20 @ 1
[ 3.226610] initcall ite_driver_init+0x0/0x20 returned 0 after 6 usecs
[ 3.227772] calling ks_driver_init+0x0/0x20 @ 1
[ 3.228668] initcall ks_driver_init+0x0/0x20 returned 0 after 6 usecs
[ 3.229858] calling lg_driver_init+0x0/0x20 @ 1
[ 3.230672] initcall lg_driver_init+0x0/0x20 returned 0 after 5 usecs
[ 3.231789] calling lg_g15_driver_init+0x0/0x20 @ 1
[ 3.232662] initcall lg_g15_driver_init+0x0/0x20 returned 0 after 6 usecs
[ 3.233920] calling ms_driver_init+0x0/0x20 @ 1
[ 3.234796] initcall ms_driver_init+0x0/0x20 returned 0 after 6 usecs
[ 3.235928] calling mr_driver_init+0x0/0x20 @ 1
[ 3.236740] initcall mr_driver_init+0x0/0x20 returned 0 after 5 usecs
[ 3.237851] calling ntrig_driver_init+0x0/0x20 @ 1
[ 3.238726] initcall ntrig_driver_init+0x0/0x20 returned 0 after 5 usecs
[ 3.239959] calling pl_driver_init+0x0/0x20 @ 1
[ 3.240774] initcall pl_driver_init+0x0/0x20 returned 0 after 5 usecs
[ 3.241887] calling pl_driver_init+0x0/0x20 @ 1
[ 3.242709] initcall pl_driver_init+0x0/0x20 returned 0 after 5 usecs
[ 3.243823] calling redragon_driver_init+0x0/0x20 @ 1
[ 3.244801] initcall redragon_driver_init+0x0/0x20 returned 0 after 6 usecs
[ 3.246107] calling samsung_driver_init+0x0/0x20 @ 1
[ 3.247058] initcall samsung_driver_init+0x0/0x20 returned 0 after 7 usecs
[ 3.248340] calling sony_init+0x0/0x20 @ 1
[ 3.249156] initcall sony_init+0x0/0x20 returned 0 after 6 usecs
[ 3.250276] calling sp_driver_init+0x0/0x20 @ 1
[ 3.251155] initcall sp_driver_init+0x0/0x20 returned 0 after 6 usecs
[ 3.252379] calling ts_driver_init+0x0/0x20 @ 1
[ 3.253250] initcall ts_driver_init+0x0/0x20 returned 0 after 6 usecs
[ 3.254451] calling hid_init+0x0/0x70 @ 1
[ 3.255253] usbcore: registered new interface driver usbhid
[ 3.256288] usbhid: USB HID core driver
[ 3.257022] initcall hid_init+0x0/0x70 returned 0 after 1781 usecs
[ 3.258170] calling wmi_bmof_driver_init+0x0/0x20 @ 1
[ 3.259135] initcall wmi_bmof_driver_init+0x0/0x20 returned 0 after 7 usecs
[ 3.260428] calling eeepc_laptop_init+0x0/0x70 @ 1
[ 3.261413] initcall eeepc_laptop_init+0x0/0x70 returned -19 after 45 usecs
[ 3.262734] calling alsa_hwdep_init+0x0/0x70 @ 1
[ 3.263630] initcall alsa_hwdep_init+0x0/0x70 returned 0 after 6 usecs
[ 3.264842] calling alsa_timer_init+0x0/0x230 @ 1
[ 3.265821] initcall alsa_timer_init+0x0/0x230 returned 0 after 82 usecs
[ 3.267118] calling snd_hrtimer_init+0x0/0x120 @ 1
[ 3.268040] initcall snd_hrtimer_init+0x0/0x120 returned 0 after 0 usecs
[ 3.269285] calling alsa_pcm_init+0x0/0x80 @ 1
[ 3.270143] initcall alsa_pcm_init+0x0/0x80 returned 0 after 1 usecs
[ 3.271321] calling alsa_seq_init+0x0/0x60 @ 1
[ 3.272245] initcall alsa_seq_init+0x0/0x60 returned 0 after 71 usecs
[ 3.273381] calling alsa_seq_dummy_init+0x0/0xf0 @ 1
[ 3.274241] initcall alsa_seq_dummy_init+0x0/0xf0 returned 0 after 5 usecs
[ 3.275418] calling azx_driver_init+0x0/0x20 @ 1
[ 3.276291] initcall azx_driver_init+0x0/0x20 returned 0 after 14 usecs
[ 3.277415] calling sock_diag_init+0x0/0x30 @ 1
[ 3.278294] initcall sock_diag_init+0x0/0x30 returned 0 after 41 usecs
[ 3.279459] calling failover_init+0x0/0x20 @ 1
[ 3.280333] initcall failover_init+0x0/0x20 returned 0 after 5 usecs
[ 3.281467] calling blackhole_init+0x0/0x10 @ 1
[ 3.282247] initcall blackhole_init+0x0/0x10 returned 0 after 1 usecs
[ 3.283334] calling init_cgroup_cls+0x0/0x10 @ 1
[ 3.284189] initcall init_cgroup_cls+0x0/0x10 returned 0 after 0 usecs
[ 3.285366] calling nfnetlink_init+0x0/0x70 @ 1
[ 3.286209] initcall nfnetlink_init+0x0/0x70 returned 0 after 7 usecs
[ 3.287343] calling nfnetlink_log_init+0x0/0xb0 @ 1
[ 3.288270] initcall nfnetlink_log_init+0x0/0xb0 returned 0 after 8 usecs
[ 3.289684] calling nf_conntrack_standalone_init+0x0/0xb0 @ 1
[ 3.290922] initcall nf_conntrack_standalone_init+0x0/0xb0 returned 0 after 100 usecs
[ 3.292418] calling ctnetlink_init+0x0/0xa0 @ 1
[ 3.293314] initcall ctnetlink_init+0x0/0xa0 returned 0 after 0 usecs
[ 3.294601] calling nf_conntrack_ftp_init+0x0/0x130 @ 1
[ 3.295704] initcall nf_conntrack_ftp_init+0x0/0x130 returned 0 after 4 usecs
[ 3.297158] calling nf_conntrack_irc_init+0x0/0x180 @ 1
[ 3.298215] initcall nf_conntrack_irc_init+0x0/0x180 returned 0 after 2 usecs
[ 3.299578] calling nf_conntrack_sip_init+0x0/0x1a0 @ 1
[ 3.300474] initcall nf_conntrack_sip_init+0x0/0x1a0 returned 0 after 4 usecs
[ 3.301681] calling nf_nat_init+0x0/0xc0 @ 1
[ 3.302368] initcall nf_nat_init+0x0/0xc0 returned 0 after 24 usecs
[ 3.303416] calling nf_nat_ftp_init+0x0/0x30 @ 1
[ 3.304364] initcall nf_nat_ftp_init+0x0/0x30 returned 0 after 0 usecs
[ 3.305458] calling nf_nat_irc_init+0x0/0x30 @ 1
[ 3.306263] initcall nf_nat_irc_init+0x0/0x30 returned 0 after 0 usecs
[ 3.307314] calling nf_nat_sip_init+0x0/0x40 @ 1
[ 3.308036] initcall nf_nat_sip_init+0x0/0x40 returned 0 after 0 usecs
[ 3.309293] calling xt_init+0x0/0x110 @ 1
[ 3.310023] initcall xt_init+0x0/0x110 returned 0 after 13 usecs
[ 3.310937] calling tcpudp_mt_init+0x0/0x20 @ 1
[ 3.311698] initcall tcpudp_mt_init+0x0/0x20 returned 0 after 2 usecs
[ 3.312736] calling connsecmark_tg_init+0x0/0x10 @ 1
[ 3.313504] initcall connsecmark_tg_init+0x0/0x10 returned 0 after 0 usecs
[ 3.314611] calling nflog_tg_init+0x0/0x10 @ 1
[ 3.315350] initcall nflog_tg_init+0x0/0x10 returned 0 after 0 usecs
[ 3.316422] calling secmark_tg_init+0x0/0x20 @ 1
[ 3.317138] initcall secmark_tg_init+0x0/0x20 returned 0 after 0 usecs
[ 3.318127] calling tcpmss_tg_init+0x0/0x20 @ 1
[ 3.318899] initcall tcpmss_tg_init+0x0/0x20 returned 0 after 0 usecs
[ 3.320072] calling conntrack_mt_init+0x0/0x20 @ 1
[ 3.320891] initcall conntrack_mt_init+0x0/0x20 returned 0 after 0 usecs
[ 3.322033] calling policy_mt_init+0x0/0x20 @ 1
[ 3.322805] initcall policy_mt_init+0x0/0x20 returned 0 after 0 usecs
[ 3.323868] calling state_mt_init+0x0/0x10 @ 1
[ 3.324670] initcall state_mt_init+0x0/0x10 returned 0 after 0 usecs
[ 3.325734] calling gre_offload_init+0x0/0x60 @ 1
[ 3.326543] initcall gre_offload_init+0x0/0x60 returned 0 after 1 usecs
[ 3.327648] calling sysctl_ipv4_init+0x0/0x60 @ 1
[ 3.328502] initcall sysctl_ipv4_init+0x0/0x60 returned 0 after 52 usecs
[ 3.329717] calling tunnel4_init+0x0/0x70 @ 1
[ 3.330473] initcall tunnel4_init+0x0/0x70 returned 0 after 0 usecs
[ 3.331556] calling nf_defrag_init+0x0/0x30 @ 1
[ 3.332329] initcall nf_defrag_init+0x0/0x30 returned 0 after 0 usecs
[ 3.333410] calling ip_tables_init+0x0/0x80 @ 1
[ 3.334283] initcall ip_tables_init+0x0/0x80 returned 0 after 8 usecs
[ 3.335525] calling iptable_filter_init+0x0/0xa0 @ 1
[ 3.336450] initcall iptable_filter_init+0x0/0xa0 returned 0 after 5 usecs
[ 3.337735] calling iptable_mangle_init+0x0/0xa0 @ 1
[ 3.338610] initcall iptable_mangle_init+0x0/0xa0 returned 0 after 0 usecs
[ 3.339890] calling reject_tg_init+0x0/0x10 @ 1
[ 3.340740] initcall reject_tg_init+0x0/0x10 returned 0 after 0 usecs
[ 3.341891] calling cubictcp_register+0x0/0x70 @ 1
[ 3.342749] initcall cubictcp_register+0x0/0x70 returned 0 after 0 usecs
[ 3.343868] calling xfrm_user_init+0x0/0x40 @ 1
[ 3.344706] Initializing XFRM netlink socket
[ 3.345462] initcall xfrm_user_init+0x0/0x40 returned 0 after 756 usecs
[ 3.346661] calling inet6_init+0x0/0x3b0 @ 1
[ 3.347477] NET: Registered PF_INET6 protocol family
[ 3.348940] Segment Routing with IPv6
[ 3.349658] In-situ OAM (IOAM) with IPv6
[ 3.350425] initcall inet6_init+0x0/0x3b0 returned 0 after 3035 usecs
[ 3.351595] calling ah6_init+0x0/0x80 @ 1
[ 3.352345] initcall ah6_init+0x0/0x80 returned 0 after 13 usecs
[ 3.353439] calling esp6_init+0x0/0x80 @ 1
[ 3.354190] initcall esp6_init+0x0/0x80 returned 0 after 0 usecs
[ 3.355262] calling ip6_tables_init+0x0/0x80 @ 1
[ 3.356146] initcall ip6_tables_init+0x0/0x80 returned 0 after 7 usecs
[ 3.357258] calling ip6table_filter_init+0x0/0xa0 @ 1
[ 3.358125] initcall ip6table_filter_init+0x0/0xa0 returned 0 after 3 usecs
[ 3.359286] calling ip6table_mangle_init+0x0/0xa0 @ 1
[ 3.360209] initcall ip6table_mangle_init+0x0/0xa0 returned 0 after 0 usecs
[ 3.361409] calling nf_defrag_init+0x0/0x70 @ 1
[ 3.362200] initcall nf_defrag_init+0x0/0x70 returned 0 after 13 usecs
[ 3.363335] calling ipv6header_mt6_init+0x0/0x10 @ 1
[ 3.364183] initcall ipv6header_mt6_init+0x0/0x10 returned 0 after 0 usecs
[ 3.365390] calling reject_tg6_init+0x0/0x10 @ 1
[ 3.366193] initcall reject_tg6_init+0x0/0x10 returned 0 after 0 usecs
[ 3.367285] calling sit_init+0x0/0xd0 @ 1
[ 3.367978] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.369269] initcall sit_init+0x0/0xd0 returned 0 after 1291 usecs
[ 3.370389] calling packet_init+0x0/0x90 @ 1
[ 3.371173] NET: Registered PF_PACKET protocol family
[ 3.372057] initcall packet_init+0x0/0x90 returned 0 after 891 usecs
[ 3.373155] calling init_rpcsec_gss+0x0/0x70 @ 1
[ 3.373965] initcall init_rpcsec_gss+0x0/0x70 returned 0 after 12 usecs
[ 3.375146] calling init_kerberos_module+0x0/0x40 @ 1
[ 3.376125] initcall init_kerberos_module+0x0/0x40 returned 0 after 6 usecs
[ 3.378016] calling init_p9+0x0/0x30 @ 1
[ 3.378789] 9pnet: Installing 9P2000 support
[ 3.379553] initcall init_p9+0x0/0x30 returned 0 after 782 usecs
[ 3.380641] calling p9_trans_fd_init+0x0/0x30 @ 1
[ 3.381571] initcall p9_trans_fd_init+0x0/0x30 returned 0 after 3 usecs
[ 3.382778] calling p9_virtio_init+0x0/0x60 @ 1
[ 3.383596] initcall p9_virtio_init+0x0/0x60 returned 0 after 10 usecs
[ 3.384719] calling init_dns_resolver+0x0/0x100 @ 1
[ 3.385619] Key type dns_resolver registered
[ 3.386369] initcall init_dns_resolver+0x0/0x100 returned 0 after 762 usecs
[ 3.387625] calling handshake_init+0x0/0xa0 @ 1
[ 3.388464] initcall handshake_init+0x0/0xa0 returned 0 after 18 usecs
[ 3.389615] calling pm_check_save_msr+0x0/0xd0 @ 1
[ 3.390488] initcall pm_check_save_msr+0x0/0xd0 returned 0 after 12 usecs
[ 3.391723] calling mcheck_init_device+0x0/0x160 @ 1
[ 3.395805] initcall mcheck_init_device+0x0/0x160 returned 0 after 3179 usecs
[ 3.397208] calling kernel_do_mounts_initrd_sysctls_init+0x0/0x30 @ 1
[ 3.398304] initcall kernel_do_mounts_initrd_sysctls_init+0x0/0x30 returned 0 after 5 usecs
[ 3.399738] calling sld_mitigate_sysctl_init+0x0/0x30 @ 1
[ 3.400694] initcall sld_mitigate_sysctl_init+0x0/0x30 returned 0 after 1 usecs
[ 3.400728] ata1: SATA link down (SStatus 0 SControl 300)
[ 3.402146] calling intel_epb_init+0x0/0xa0 @ 1
[ 3.402149] initcall intel_epb_init+0x0/0xa0 returned -19 after 0 usecs
[ 3.403753] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.404334] calling mcheck_late_init+0x0/0x80 @ 1
[ 3.405963] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.406750] initcall mcheck_late_init+0x0/0x80 returned 0 after 13 usecs
[ 3.408209] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.408800] calling severities_debugfs_init+0x0/0x30 @ 1
[ 3.410646] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.411236] initcall severities_debugfs_init+0x0/0x30 returned 0 after 2 usecs
[ 3.412515] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.413229] calling microcode_init+0x0/0x1f0 @ 1
[ 3.414513] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[ 3.415395] initcall microcode_init+0x0/0x1f0 returned -22 after 0 usecs
[ 3.415398] calling cpu_init_debugfs+0x0/0xc0 @ 1
[ 3.416162] ata3.00: applying bridge limits
[ 3.417147] initcall cpu_init_debugfs+0x0/0xc0 returned 0 after 34 usecs
[ 3.418435] ata3.00: configured for UDMA/100
[ 3.419135] calling hpet_insert_resource+0x0/0x30 @ 1
[ 3.420333] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5
[ 3.421011] initcall hpet_insert_resource+0x0/0x30 returned 0 after 2 usecs
[ 3.422812] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[ 3.422818] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.424035] calling start_sync_check_timer+0x0/0x60 @ 1
[ 3.425511] sr 2:0:0:0: [sr0] Hmm, seems the drive doesn't support multisession CD's
[ 3.426368] initcall start_sync_check_timer+0x0/0x60 returned 0 after 0 usecs
[ 3.429503] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.429861] calling update_mp_table+0x0/0x6a0 @ 1
[ 3.430993] probe of 2:0:0:0 returned 0 after 8832 usecs
[ 3.431793] initcall update_mp_table+0x0/0x6a0 returned 0 after 0 usecs
[ 3.432769] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 3.433567] calling lapic_insert_resource+0x0/0x50 @ 1
[ 3.436437] initcall lapic_insert_resource+0x0/0x50 returned 0 after 0 usecs
[ 3.437624] calling print_ipi_mode+0x0/0x40 @ 1
[ 3.438398] IPI shorthand broadcast: enabled
[ 3.439118] initcall print_ipi_mode+0x0/0x40 returned 0 after 720 usecs
[ 3.440252] calling print_ICs+0x0/0x100 @ 1
[ 3.441072] initcall print_ICs+0x0/0x100 returned 0 after 0 usecs
[ 3.442172] calling setup_efi_kvm_sev_migration+0x0/0x10 @ 1
[ 3.443212] initcall setup_efi_kvm_sev_migration+0x0/0x10 returned 0 after 0 usecs
[ 3.444569] calling create_tlb_single_page_flush_ceiling+0x0/0x30 @ 1
[ 3.445677] initcall create_tlb_single_page_flush_ceiling+0x0/0x30 returned 0 after 3 usecs
[ 3.447067] calling pat_memtype_list_init+0x0/0x40 @ 1
[ 3.447939] initcall pat_memtype_list_init+0x0/0x40 returned 0 after 1 usecs
[ 3.449112] calling create_init_pkru_value+0x0/0x40 @ 1
[ 3.450003] initcall create_init_pkru_value+0x0/0x40 returned 0 after 0 usecs
[ 3.451190] calling kernel_panic_sysctls_init+0x0/0x30 @ 1
[ 3.452131] initcall kernel_panic_sysctls_init+0x0/0x30 returned 0 after 4 usecs
[ 3.453365] calling kernel_panic_sysfs_init+0x0/0x20 @ 1
[ 3.454275] initcall kernel_panic_sysfs_init+0x0/0x20 returned 0 after 3 usecs
[ 3.455477] calling kernel_exit_sysctls_init+0x0/0x30 @ 1
[ 3.456466] initcall kernel_exit_sysctls_init+0x0/0x30 returned 0 after 1 usecs
[ 3.457794] calling kernel_exit_sysfs_init+0x0/0x20 @ 1
[ 3.458717] initcall kernel_exit_sysfs_init+0x0/0x20 returned 0 after 1 usecs
[ 3.459908] calling param_sysfs_builtin_init+0x0/0x1a0 @ 1
[ 3.463389] initcall param_sysfs_builtin_init+0x0/0x1a0 returned 0 after 2541 usecs
[ 3.464669] calling reboot_ksysfs_init+0x0/0x80 @ 1
[ 3.465520] initcall reboot_ksysfs_init+0x0/0x80 returned 0 after 7 usecs
[ 3.466659] calling sched_core_sysctl_init+0x0/0x30 @ 1
[ 3.467612] initcall sched_core_sysctl_init+0x0/0x30 returned 0 after 2 usecs
[ 3.468813] calling sched_fair_sysctl_init+0x0/0x30 @ 1
[ 3.469705] initcall sched_fair_sysctl_init+0x0/0x30 returned 0 after 0 usecs
[ 3.470895] calling sched_rt_sysctl_init+0x0/0x30 @ 1
[ 3.471815] initcall sched_rt_sysctl_init+0x0/0x30 returned 0 after 1 usecs
[ 3.472982] calling sched_dl_sysctl_init+0x0/0x30 @ 1
[ 3.473843] initcall sched_dl_sysctl_init+0x0/0x30 returned 0 after 1 usecs
[ 3.475001] calling sched_clock_init_late+0x0/0x90 @ 1
[ 3.475877] sched_clock: Marking stable (3356012082, 118986578)->(3646806140, -171807480)
[ 3.477959] initcall sched_clock_init_late+0x0/0x90 returned 0 after 2082 usecs
[ 3.479231] calling cpu_latency_qos_init+0x0/0x50 @ 1
[ 3.480193] initcall cpu_latency_qos_init+0x0/0x50 returned 0 after 67 usecs
[ 3.481377] calling pm_debugfs_init+0x0/0x30 @ 1
[ 3.482176] initcall pm_debugfs_init+0x0/0x30 returned 0 after 4 usecs
[ 3.483339] calling printk_late_init+0x0/0x170 @ 1
[ 3.484206] initcall printk_late_init+0x0/0x170 returned 0 after 8 usecs
[ 3.485325] calling init_srcu_module_notifier+0x0/0x40 @ 1
[ 3.486283] initcall init_srcu_module_notifier+0x0/0x40 returned 0 after 2 usecs
[ 3.487528] calling swiotlb_create_default_debugfs+0x0/0xb0 @ 1
[ 3.488604] initcall swiotlb_create_default_debugfs+0x0/0xb0 returned 0 after 11 usecs
[ 3.490018] calling tk_debug_sleep_time_init+0x0/0x30 @ 1
[ 3.490960] initcall tk_debug_sleep_time_init+0x0/0x30 returned 0 after 1 usecs
[ 3.492180] calling kernel_acct_sysctls_init+0x0/0x30 @ 1
[ 3.493101] initcall kernel_acct_sysctls_init+0x0/0x30 returned 0 after 1 usecs
[ 3.494317] calling kexec_core_sysctl_init+0x0/0x30 @ 1
[ 3.495209] initcall kexec_core_sysctl_init+0x0/0x30 returned 0 after 1 usecs
[ 3.496396] calling bpf_rstat_kfunc_init+0x0/0x10 @ 1
[ 3.497257] initcall bpf_rstat_kfunc_init+0x0/0x10 returned 0 after 0 usecs
[ 3.498523] calling debugfs_kprobe_init+0x0/0x80 @ 1
[ 3.499384] initcall debugfs_kprobe_init+0x0/0x80 returned 0 after 4 usecs
[ 3.500555] calling kernel_delayacct_sysctls_init+0x0/0x30 @ 1
[ 3.501569] initcall kernel_delayacct_sysctls_init+0x0/0x30 returned 0 after 1 usecs
[ 3.502860] calling taskstats_init+0x0/0x40 @ 1
[ 3.503714] registered taskstats version 1
[ 3.504467] initcall taskstats_init+0x0/0x40 returned 0 after 761 usecs
[ 3.505651] calling load_system_certificate_list+0x0/0x40 @ 1
[ 3.506657] Loading compiled-in X.509 certificates
[ 3.507550] initcall load_system_certificate_list+0x0/0x40 returned 0 after 893 usecs
[ 3.508878] calling fault_around_debugfs+0x0/0x30 @ 1
[ 3.509750] initcall fault_around_debugfs+0x0/0x30 returned 0 after 1 usecs
[ 3.510910] calling slab_sysfs_init+0x0/0x120 @ 1
[ 3.512701] initcall slab_sysfs_init+0x0/0x120 returned 0 after 965 usecs
[ 3.513875] calling max_swapfiles_check+0x0/0x10 @ 1
[ 3.514788] initcall max_swapfiles_check+0x0/0x10 returned 0 after 0 usecs
[ 3.515990] calling hugetlb_vmemmap_init+0x0/0x90 @ 1
[ 3.516883] initcall hugetlb_vmemmap_init+0x0/0x90 returned 0 after 6 usecs
[ 3.518074] calling mempolicy_sysfs_init+0x0/0x270 @ 1
[ 3.518952] initcall mempolicy_sysfs_init+0x0/0x270 returned 0 after 2 usecs
[ 3.520140] calling check_early_ioremap_leak+0x0/0x50 @ 1
[ 3.521064] initcall check_early_ioremap_leak+0x0/0x50 returned 0 after 0 usecs
[ 3.522283] calling init_root_keyring+0x0/0x10 @ 1
[ 3.523144] initcall init_root_keyring+0x0/0x10 returned 0 after 35 usecs
[ 3.524281] calling integrity_fs_init+0x0/0x20 @ 1
[ 3.525139] initcall integrity_fs_init+0x0/0x20 returned -19 after 0 usecs
[ 3.526312] calling crypto_algapi_init+0x0/0x10 @ 1
[ 3.527231] initcall crypto_algapi_init+0x0/0x10 returned 0 after 2 usecs
[ 3.528418] calling blk_timeout_init+0x0/0x20 @ 1
[ 3.529226] initcall blk_timeout_init+0x0/0x20 returned 0 after 0 usecs
[ 3.530332] calling depot_debugfs_init+0x0/0x40 @ 1
[ 3.531221] initcall depot_debugfs_init+0x0/0x40 returned 0 after 3 usecs
[ 3.532428] calling pci_resource_alignment_sysfs_init+0x0/0x20 @ 1
[ 3.533528] initcall pci_resource_alignment_sysfs_init+0x0/0x20 returned 0 after 3 usecs
[ 3.534981] calling pci_sysfs_init+0x0/0x90 @ 1
[ 3.535837] initcall pci_sysfs_init+0x0/0x90 returned 0 after 13 usecs
[ 3.536980] calling dmar_free_unused_resources+0x0/0xd0 @ 1
[ 3.537990] initcall dmar_free_unused_resources+0x0/0xd0 returned 0 after 0 usecs
[ 3.539234] calling sync_state_resume_initcall+0x0/0x10 @ 1
[ 3.540193] initcall sync_state_resume_initcall+0x0/0x10 returned 0 after 0 usecs
[ 3.541553] calling deferred_probe_initcall+0x0/0x90 @ 1
[ 3.542518] initcall deferred_probe_initcall+0x0/0x90 returned 0 after 15 usecs
[ 3.543749] calling late_resume_init+0x0/0x190 @ 1
[ 3.544709] PM: Magic number: 12:109:834
[ 3.545577] initcall late_resume_init+0x0/0x190 returned 0 after 869 usecs
[ 3.546795] calling init_netconsole+0x0/0x2d0 @ 1
[ 3.547620] printk: legacy console [netcon0] enabled
[ 3.548451] netconsole: network logging started
[ 3.549216] initcall init_netconsole+0x0/0x2d0 returned 0 after 1608 usecs
[ 3.550368] calling acpi_cpufreq_init+0x0/0x20 @ 1
[ 3.551233] initcall acpi_cpufreq_init+0x0/0x20 returned -19 after 18 usecs
[ 3.552395] calling firmware_memmap_init+0x0/0x40 @ 1
[ 3.553275] initcall firmware_memmap_init+0x0/0x40 returned 0 after 15 usecs
[ 3.554451] calling register_update_efi_random_seed+0x0/0x30 @ 1
[ 3.555481] initcall register_update_efi_random_seed+0x0/0x30 returned 0 after 0 usecs
[ 3.556907] calling efi_shutdown_init+0x0/0x50 @ 1
[ 3.557788] initcall efi_shutdown_init+0x0/0x50 returned -19 after 0 usecs
[ 3.558950] calling efi_earlycon_unmap_fb+0x0/0x50 @ 1
[ 3.559826] initcall efi_earlycon_unmap_fb+0x0/0x50 returned 0 after 0 usecs
[ 3.561001] calling bpf_kfunc_init+0x0/0x10 @ 1
[ 3.561778] initcall bpf_kfunc_init+0x0/0x10 returned 0 after 0 usecs
[ 3.562864] calling init_subsystem+0x0/0x10 @ 1
[ 3.563647] initcall init_subsystem+0x0/0x10 returned 0 after 3 usecs
[ 3.564733] calling xdp_metadata_init+0x0/0x10 @ 1
[ 3.565551] initcall xdp_metadata_init+0x0/0x10 returned 0 after 0 usecs
[ 3.566666] calling tcp_congestion_default+0x0/0x20 @ 1
[ 3.567563] initcall tcp_congestion_default+0x0/0x20 returned 0 after 3 usecs
[ 3.568755] calling ip_auto_config+0x0/0x1410 @ 1
[ 3.569566] initcall ip_auto_config+0x0/0x1410 returned 0 after 5 usecs
[ 3.570667] calling regulatory_init_db+0x0/0x100 @ 1
[ 3.571528] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.573364] kworker/u93:0 (406) used greatest stack depth: 14320 bytes left
[ 3.574165] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.574976] kworker/u93:0 (407) used greatest stack depth: 14264 bytes left
[ 3.576159] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 3.578662] initcall regulatory_init_db+0x0/0x100 returned 0 after 7140 usecs
[ 3.579895] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 3.581336] cfg80211: failed to load regulatory.db
[ 3.582239] calling pci_mmcfg_late_insert_resources+0x0/0x70 @ 1
[ 3.583319] initcall pci_mmcfg_late_insert_resources+0x0/0x70 returned 0 after 1 usecs
[ 3.585162] calling software_resume_initcall+0x0/0x110 @ 1
[ 3.586318] initcall software_resume_initcall+0x0/0x110 returned -2 after 6 usecs
[ 3.587652] calling trace_eval_sync+0x0/0x20 @ 1
[ 3.588560] initcall trace_eval_sync+0x0/0x20 returned 0 after 25 usecs
[ 3.589818] calling late_trace_init+0x0/0xc0 @ 1
[ 3.590715] initcall late_trace_init+0x0/0xc0 returned 0 after 0 usecs
[ 3.591949] calling alsa_sound_last_init+0x0/0x90 @ 1
[ 3.592915] ALSA device list:
[ 3.593462] No soundcards found.
[ 3.594065] initcall alsa_sound_last_init+0x0/0x90 returned 0 after 1150 usecs
[ 3.595315] Warning: unable to open an initial console.
[ 3.598182] Freeing unused kernel image (initmem) memory: 3396K
[ 3.610098] Write protecting the kernel read-only data: 26624k
[ 3.612697] Freeing unused kernel image (rodata/data gap) memory: 1284K
[ 3.660546] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.661690] x86/mm: Checking user space page tables
[ 3.706835] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.707941] Run /init as init process
[ 3.708563] with arguments:
[ 3.709082] /init
[ 3.709492] nokaslr
[ 3.709908] with environment:
[ 3.710489] HOME=/
[ 3.710898] TERM=linux
[ 3.728193] rcu: Offloading 25
[ 3.728852] rcu: Offloading 34
[ 3.729628] rcu: Offloading 31
[ 3.792162] rcu: De-offloading 4
[ 3.794021] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 3.795713] probe of serio1 returned 0 after 625772 usecs
[ 3.800115] rcu: Offloading 4
[ 6.304936] rcu: Offloading 21
[ 6.309198] rcu: Offloading 20
[ 6.309675] rcu-torture: rcu_torture_read_exit: End of episode
[ 7.449223] rcu: Offloading 11
[ 7.450378] rcu: Offloading 10
[ 7.451616] rcu: De-offloading 3
[ 7.452596] rcu: Offloading 15
[ 7.453376] rcu: Offloading 39
[ 8.472348] rcu: Offloading 26
[ 9.526156] rcu: Offloading 22
[ 9.549174] rcu: Offloading 17
[ 9.571545] rcu: De-offloading 21
[ 9.582336] rcu: Offloading 18
[ 9.665083] clocksource: Long readout interval, skipping watchdog check: cs_nsec: 1526568508187 wd_nsec: 496085944
[ 10.702722] rcu: Offloading 27
[ 10.704212] rcu: De-offloading 11
[ 10.705342] rcu: De-offloading 31
[ 12.125266] rcu: Offloading 9
[ 12.126176] rcu: Offloading 8
[ 12.126973] rcu: Offloading 40
[ 12.128067] rcu: Offloading 13
[ 12.128979] rcu: De-offloading 7
[ 13.733248] rcu: Offloading 28
[ 13.784225] rcu: Offloading 23
[ 13.785255] rcu: Offloading 2
[ 13.786144] rcu: Offloading 11
[ 13.789042] rcu: Offloading 16
[ 15.096248] rcu: De-offloading 20
[ 15.097193] rcu: De-offloading 27
[ 15.098055] rcu: De-offloading 25
[ 15.098808] rcu: De-offloading 8
[ 15.099652] rcu: Offloading 38
[ 16.127807] rcu: De-offloading 26
[ 16.142629] rcu: Offloading 29
[ 16.193841] rcu: De-offloading 17
[ 16.512191] rcu-torture: rtc: 0000000038f74bec ver: 467 tfle: 0 rta: 467 rtaf: 0 rtf: 456 rtmbe: 0 rtmbkf: 0/452 rtbe: 0 rtbke: 0 rtbf: 0 rtb: 0 nt: 26373 onoff: 0/0:0/0 -1,0:-1,0 0:0 (HZ=1000) barrier: 84/84:0 read-exits: 16 nocb-toggles: 39:41
[ 16.517127] rcu-torture: Reader Pipe: 41307093 2187 0 0 0 0 0 0 0 0 0
[ 16.518544] rcu-torture: Reader Batch: 41304132 5148 0 0 0 0 0 0 0 0 0
[ 16.520273] rcu-torture: Free-Block Circulation: 468 466 465 464 463 462 461 460 458 457 0
[ 17.192181] rcu: De-offloading 18
[ 17.213203] rcu: Offloading 3
[ 17.591005] rcu: Offloading 12
[ 17.591827] rcu: De-offloading 11
[ 18.539096] rcu: Offloading 42
[ 18.928156] rcu: Offloading 17
[ 18.929109] rcu: De-offloading 23
[ 18.930145] rcu: Offloading 27
[ 19.544081] rcu: De-offloading 28
[ 19.557056] rcu: De-offloading 40
[ 19.648036] rcu-torture: rcu_torture_read_exit: Start of episode
[ 19.652874] rcu-torture: rcu_torture_read_exit: End of episode
[ 19.999552] rcu: De-offloading 22
[ 20.000651] rcu: De-offloading 6
[ 20.002134] rcu: De-offloading 5
[ 21.048152] rcu: Offloading 6
[ 21.048920] rcu: De-offloading 3
[ 21.049734] rcu: Offloading 5
[ 21.087086] rcu: De-offloading 9
[ 21.107294] rcu: De-offloading 1
[ 22.054820] rcu: De-offloading 12
[ 22.067008] rcu: De-offloading 42
[ 22.115344] rcu: Offloading 40
[ 22.134167] rcu: De-offloading 17
[ 22.187343] rcu: Offloading 19
[ 23.173149] rcu: Offloading 37
[ 23.179048] rcu: Offloading 18
[ 23.185713] rcu: De-offloading 19
[ 23.265507] rcu: Offloading 23
[ 24.302182] rcu: Offloading 14
[ 24.303139] rcu: Offloading 33
[ 24.304118] rcu: De-offloading 14
[ 24.305849] rcu: Offloading 36
[ 24.859273] rcu: Offloading 42
[ 25.309487] rcu: De-offloading 38
[ 25.344336] rcu: Offloading 25
[ 25.366186] rcu: Offloading 35
[ 25.367012] rcu: De-offloading 10
[ 25.427659] rcu: De-offloading 37
[ 26.426886] rcu: Offloading 12
[ 26.484049] rcu: Offloading 20
[ 26.959177] rcu: De-offloading 5
[ 31.872040] rcu-torture: rtc: 000000006d378f27 ver: 909 tfle: 0 rta: 909 rtaf: 0 rtf: 900 rtmbe: 0 rtmbkf: 0/885 rtbe: 0 rtbke: 0 rtbf: 0 rtb: 0 nt: 53946 onoff: 0/0:0/0 -1,0:-1,0 0:0 (HZ=1000) barrier: 164/164:0 read-exits: 32 nocb-toggles: 74:78
[ 31.875373] rcu-torture: Reader Pipe: 85199772 4280 0 0 0 0 0 0 0 0 0
[ 31.876377] rcu-torture: Reader Batch: 85194247 9805 0 0 0 0 0 0 0 0 0
[ 31.877421] rcu-torture: Free-Block Circulation: 908 908 907 906 905 904 903 902 901 900 0
[ 32.306238] rcu: De-offloading 12
[ 32.307612] rcu: Offloading 24
[ 32.310010] rcu: Offloading 3
[ 32.311324] rcu: Offloading 28
[ 32.967999] rcu-torture: torture_onoff end holdoff
[ 33.280043] rcu-torture: rcu_torture_read_exit: Start of episode
[ 33.284593] rcu-torture: rcu_torture_read_exit: End of episode
[ 33.677152] rcu: Offloading 17
[ 33.678365] rcu: Offloading 22
[ 33.679261] rcu: De-offloading 27
[ 33.680265] rcu: Offloading 1
[ 33.680848] rcu: De-offloading 17
[ 33.693309] kworker/dying (71) used greatest stack depth: 13984 bytes left
[ 33.703139] hrtimer: interrupt took 4421242 ns
[ 33.826558] smpboot: CPU 6 is now offline
[ 34.816222] rcu: De-offloading 15
[ 34.817147] rcu: Offloading 19
[ 34.818120] rcu: Offloading 32
[ 34.819118] rcu: NOCB: Cannot CB-deoffload offline CPU 6
[ 34.872924] smpboot: CPU 5 is now offline
[ 35.976383] rcu: De-offloading 34
[ 35.977559] rcu: De-offloading 19
[ 35.978558] rcu: Offloading 14
[ 35.979641] smpboot: Booting Node 0 Processor 5 APIC 0x5
[ 37.213149] rcu: De-offloading 35
[ 37.214055] rcu: De-offloading 29
[ 37.215007] rcu: De-offloading 0
[ 37.215830] rcu: Offloading 35
[ 37.216948] rcu: Offloading 9
[ 37.217819] rcu: Offloading 38
[ 37.638228] smpboot: CPU 7 is now offline
[ 38.868491] rcu: De-offloading 35
[ 38.885314] rcu: De-offloading 36
[ 39.031846] smpboot: CPU 1 is now offline
[ 40.210119] rcu: De-offloading 42
[ 40.211934] rcu: Offloading 10
[ 40.212870] rcu: De-offloading 10
[ 40.213778] rcu: De-offloading 22
[ 40.214754] rcu: De-offloading 38
[ 40.215714] rcu: NOCB: Cannot CB-offload offline CPU 7
[ 40.346524] smpboot: CPU 5 is now offline
[ 41.258536] rcu: Offloading 30
[ 41.268665] rcu: De-offloading 20
[ 41.281205] rcu: Offloading 37
[ 41.304313] rcu: Offloading 35
[ 41.306456] rcu: Offloading 41
[ 41.317165] rcu: Offloading 34
[ 41.379392] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 42.544338] rcu: Offloading 27
[ 42.545336] rcu: De-offloading 16
[ 42.546254] rcu: Offloading 20
[ 42.547613] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 43.552224] rcu: Offloading 38
[ 43.571002] rcu: De-offloading 41
[ 43.572057] rcu: De-offloading 24
[ 43.573048] rcu: De-offloading 23
[ 43.921273] rcu: De-offloading 2
[ 43.922324] smpboot: Booting Node 0 Processor 6 APIC 0x6
[ 45.438205] rcu: De-offloading 20
[ 45.455345] rcu: Offloading 24
[ 45.457740] rcu: Offloading 22
[ 45.459755] rcu: De-offloading 1
[ 45.494965] smpboot: CPU 6 is now offline
[ 46.612266] rcu: Offloading 41
[ 46.613151] rcu: De-offloading 13
[ 46.614163] rcu: De-offloading 3
[ 46.615146] rcu: Offloading 36
[ 46.976030] rcu-torture: rcu_torture_read_exit: Start of episode
[ 46.980349] rcu-torture: rcu_torture_read_exit: End of episode
[ 47.232009] rcu-torture: rtc: 0000000033669652 ver: 1351 tfle: 0 rta: 1352 rtaf: 0 rtf: 1341 rtmbe: 0 rtmbkf: 0/1320 rtbe: 0 rtbke: 0 rtbf: 0 rtb: 0 nt: 89776 onoff: 4/4:6/6 64,417:45,860 803:2719 (HZ=1000) barrier: 218/219:0 read-exits: 64 nocb-toggles: 127:121
[ 47.236772] rcu-torture: Reader Pipe: 142757514 6322 0 0 0 0 0 0 0 0 0
[ 47.238052] rcu-torture: Reader Batch: 142748912 14924 0 0 0 0 0 0 0 0 0
[ 47.239481] rcu-torture: Free-Block Circulation: 1351 1350 1349 1348 1347 1346 1345 1344 1343 1341 0
[ 47.591592] smpboot: CPU 2 is now offline
[ 47.629075] rcu: Offloading 7
[ 47.629873] rcu: Offloading 1
[ 47.648226] rcu: Offloading 21
[ 47.666596] rcu: Offloading 23
[ 47.667506] rcu: Offloading 42
[ 47.668386] rcu: De-offloading 4
[ 47.714153] rcu: De-offloading 7
[ 49.269021] rcu: Offloading 31
[ 49.270105] rcu: Offloading 4
[ 49.274689] rcu: Offloading 12
[ 49.275722] rcu: De-offloading 25
[ 49.276886] smpboot: Booting Node 0 Processor 6 APIC 0x6
[ 50.681476] rcu: Offloading 25
[ 50.682533] rcu: De-offloading 40
[ 50.683552] rcu: De-offloading 6
[ 50.913390] smpboot: Booting Node 0 Processor 2 APIC 0x2
[ 51.726100] rcu: De-offloading 9
[ 51.742268] rcu: De-offloading 36
[ 51.754564] rcu: Offloading 26
[ 51.784915] rcu: De-offloading 41
[ 52.754661] rcu: De-offloading 24
[ 52.810641] rcu: Offloading 41
[ 52.847079] rcu: Offloading 20
[ 52.878285] rcu: Offloading 29
[ 53.320319] smpboot: CPU 7 is now offline
[ 54.333093] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 55.411602] smpboot: CPU 1 is now offline
[ 56.433696] smpboot: CPU 3 is now offline
[ 57.455003] smpboot: CPU 6 is now offline
[ 58.320307] rcu: De-offloading 31
[ 58.324100] rcu: De-offloading 34
[ 58.325159] rcu: De-offloading 29
[ 58.326155] rcu: Offloading 2
[ 58.327079] rcu: De-offloading 32
[ 58.328127] rcu: Offloading 19
[ 58.695061] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 59.440702] rcu: De-offloading 23
[ 59.441818] rcu: De-offloading 20
[ 59.445229] rcu: Offloading 11
[ 59.446148] rcu: Offloading 15
[ 59.452618] rcu: NOCB: Cannot CB-offload offline CPU 5
[ 59.455889] rcu: De-offloading 37
[ 59.983692] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 60.288010] rcu-torture: rcu_torture_read_exit: Start of episode
[ 60.293419] rcu-torture: rcu_torture_read_exit: End of episode
[ 60.628239] rcu: Offloading 40
[ 60.629000] rcu: De-offloading 1
[ 60.632998] rcu: De-offloading 39
[ 60.634413] rcu: Offloading 13
[ 60.635197] rcu: De-offloading 14
[ 60.636156] rcu: Offloading 1
[ 61.304813] rcu-torture: torture_shutdown task shutting down system
[ 61.306307] rcu-torture: rcu_torture_reader is stopping
[ 61.306308] rcu-torture: rcu_torture_reader is stopping
[ 61.306308] rcu-torture: rcu_torture_reader is stopping
[ 61.306309] rcu-torture: Stopping torture_shuffle task
[ 61.306309] rcu-torture: rcu_torture_reader is stopping
[ 61.306309] rcu-torture: rcu_torture_reader is stopping
[ 61.306309] rcu-torture: rcu_torture_reader is stopping
[ 61.306309] rcu-torture: rcu_torture_reader is stopping
[ 61.306355] rcu-torture: torture_shuffle is stopping
[ 61.306387] rcu-torture: Stopping torture_stutter task
[ 61.306426] rcu-torture: torture_stutter is stopping
[ 61.306482] rcu-torture: Stopping torture_onoff task
[ 61.306510] rcu-torture: torture_onoff is stopping
[ 61.307240] rcu-torture: rcu_torture_fakewriter is stopping
[ 61.307474] rcu-torture: rcu_torture_fakewriter is stopping
[ 61.311187] rcu-torture: rcu_torture_writer is stopping
[ 61.313098] smpboot: Booting Node 0 Processor 5 APIC 0x5
[ 61.315006] rcu-torture: rcu_torture_fakewriter is stopping
[ 61.322046] rcu-torture: rcu_torture_fakewriter is stopping
[ 61.391026] rcu-torture: rcu_torture_barrier is stopping
[ 61.412889] smpboot: Booting Node 0 Processor 6 APIC 0x6
[ 61.452833] rcu: rcu_preempt: wait state: RCU_GP_WAIT_FQS(5) ->state: 0x402 ->rt_priority 0 delta ->gp_start 21 ->gp_activity 1 ->gp_req_activity 21 ->gp_wake_time 27 ->gp_wake_seq 11149 ->gp_seq 11153 ->gp_seq_needed 11152 ->gp_max 318 ->gp_flags 0x0
[ 61.456849] rcu: rcu_node 0:42 ->gp_seq 11157 ->gp_seq_needed 11156 ->qsmask 0x7 .... ->n_boosts 0
[ 61.458471] rcu: rcu_node 0:14 ->gp_seq 11157 ->gp_seq_needed 11164 ->qsmask 0x4 .... ->n_boosts 0
[ 61.460155] rcu: cpu 0 ->gp_seq_needed 11164
[ 61.460894] rcu: cpu 2 ->gp_seq_needed 11164
[ 61.461678] rcu: cpu 3 ->gp_seq_needed 11160
[ 61.462429] rcu: cpu 5 ->gp_seq_needed 11160
[ 61.463180] rcu: cpu 6 ->gp_seq_needed 11164
[ 61.463952] rcu: rcu_node 15:29 ->gp_seq 11157 ->gp_seq_needed 11164 ->qsmask 0x0 .... ->n_boosts 0
[ 61.465548] rcu: cpu 20 ->gp_seq_needed 11164
[ 61.466317] rcu: CB 1^0->-1 KbclSW F226 L226 C0 ..... q0 S CPU 2
[ 61.467449] rcu: CB 2^0->1 KbclSW F227 L227 C0 ..... q0 S CPU 0
[ 61.468656] rcu: CB 4^0->2 KbclSW F164 L164 C0 ..... q0 S CPU 25
[ 61.469840] rcu: CB 11^7->13 KbclSW F1175 L1177 C1 ..... q0 S CPU 8
[ 61.471085] rcu: CB 12^7->11 KbclSW F165 L165 C0 ..... q0 S CPU 3
[ 61.472281] rcu: CB 13^7->-1 KbclSW F14859 L18801 C0 ..... q0 S CPU 3
[ 61.473508] rcu: CB 15^14->-1 KbclSW F26657 L26658 C0 ..... q0 S CPU 15
[ 61.474773] rcu: CB 18^14->19 KbclSW F1174 L1174 C0 ..... q0 S CPU 25
[ 61.476016] rcu: CB 19^14->15 KbclSW F1176 L1176 C0 ..... q0 S CPU 19
[ 61.477246] rcu: nocb GP 21 KldtS W[..] ..:0 rnp 15:29 56 S CPU 24
[ 61.478404] rcu: CB 21^21->25 KbclSW F51906 L55165 C0 ..... q0 S CPU 0
[ 61.479609] rcu: CB 22^21->21 KbclSW F21265 L4294728615 C0 ..... q0 S CPU 17
[ 61.480859] rcu: CB 25^21->26 KbclSW F5039 L5039 C0 ..... q0 S CPU 16
[ 61.482007] rcu: CB 26^21->-1 KbclSW F4035 L4035 C2 ..... q0 S CPU 0
[ 61.483137] rcu: CB 27^21->22 KbclSW F1189 L1193 C2 ..... q0 S CPU 18
[ 61.484276] rcu: nocb GP 28 KldtS W[..] ..:0 rnp 15:29 95287 S CPU 8
[ 61.485453] rcu: CB 28^28->30 KbclSW F181 L181 C0 ..... q0 S CPU 19
[ 61.486559] rcu: CB 30^28->-1 KbclSW F202 L202 C0 ..... q0 S CPU 2
[ 61.487656] rcu: CB 33^28->28 KbclSW F181 L181 C2 ..... q0 S CPU 16
[ 61.488812] rcu: nocb GP 35 KldtS W[..] ..:0 rnp 30:42 562 S CPU 40
[ 61.489967] rcu: CB 35^35->38 KbclSW F1194 L1198 C2 ..... q0 S CPU 19
[ 61.491105] rcu: CB 38^35->41 KbclSW F1191 L1191 C0 ..... q0 S CPU 38
[ 61.492289] rcu: CB 40^35->-1 KbclSW F755 L826 C0 ..... q0 S CPU 14
[ 61.493496] rcu: CB 41^35->40 KbclSW F189 L189 C0 ..... q0 S CPU 40
[ 61.494716] rcu: nocb GP 42 KldtS W[..] ..:0 rnp 30:42 26 S CPU 42
[ 61.495882] rcu: CB 42^42->-1 KbclSW F1200 L1203 C1 ..... q0 S CPU 16
[ 61.497146] rcu: RCU callbacks invoked since boot: 123050
[ 61.498163] rcu_tasks: RTGS_WAIT_CBS(11) since 61198 g:0 i:0/0 k.u. l:250
[ 61.499438] rcu_tasks_rude: RTGS_WAIT_CBS(11) since 61198 g:0 i:0/0 k.u. l:250
[ 61.709649] rcu-torture: rcu_nocb_toggle is stopping
[ 61.717754] rcu-torture: rcu_nocb_toggle is stopping
[ 61.717946] rcu-torture: rcu_nocb_toggle is stopping
[ 61.722408] rcu-torture: rcu_nocb_toggle is stopping
[ 61.723864] rcu-torture: rcu_nocb_toggle is stopping
[ 61.738025] rcu-torture: rcu_nocb_toggle is stopping
[ 61.742185] rcu-torture: rcu_nocb_toggle is stopping
[ 61.756597] rcu-torture: rcu_nocb_toggle is stopping
[ 62.336102] rcu-torture: rcu_torture_read_exit is stopping
[ 62.336146] rcu-torture: Stopping rcutorture_read_exit task
[ 62.338117] rcu-torture: Stopping rcu_torture_barrier task
[ 62.339205] rcu-torture: Stopping rcu_torture_barrier_cbs task
[ 62.346183] rcu-torture: rcu_torture_barrier_cbs is stopping
[ 62.347161] rcu-torture: Stopping rcu_torture_barrier_cbs task
[ 62.355052] rcu-torture: rcu_torture_barrier_cbs is stopping
[ 62.355906] rcu-torture: Stopping rcu_torture_barrier_cbs task
[ 62.364031] rcu-torture: rcu_torture_barrier_cbs is stopping
[ 62.365181] rcu-torture: Stopping rcu_torture_barrier_cbs task
[ 62.371239] rcu-torture: rcu_torture_barrier_cbs is stopping
[ 62.372156] rcu-torture: Stopping rcu_torture_writer task
[ 62.373271] rcu-torture: Stopping rcu_nocb_toggle task
[ 62.374257] rcu-torture: Stopping rcu_nocb_toggle task
[ 62.375251] rcu-torture: Stopping rcu_nocb_toggle task
[ 62.376249] rcu-torture: Stopping rcu_nocb_toggle task
[ 62.377270] rcu-torture: Stopping rcu_nocb_toggle task
[ 62.378279] rcu-torture: Stopping rcu_nocb_toggle task
[ 62.379269] rcu-torture: Stopping rcu_nocb_toggle task
[ 62.380269] rcu-torture: Stopping rcu_nocb_toggle task
[ 62.381270] rcu-torture: Stopping rcu_torture_reader task
[ 62.382330] rcu-torture: Stopping rcu_torture_reader task
[ 62.383394] rcu-torture: Stopping rcu_torture_reader task
[ 62.384455] rcu-torture: Stopping rcu_torture_reader task
[ 62.385519] rcu-torture: Stopping rcu_torture_reader task
[ 62.386576] rcu-torture: Stopping rcu_torture_reader task
[ 62.387671] rcu-torture: Stopping rcu_torture_reader task
[ 62.388719] rcu-torture: Stopping rcu_torture_fakewriter task
[ 62.389904] rcu-torture: Stopping rcu_torture_fakewriter task
[ 62.391021] rcu-torture: Stopping rcu_torture_fakewriter task
[ 62.392196] rcu-torture: Stopping rcu_torture_fakewriter task
[ 62.393333] rcu: End-test grace-period state: g11221 f0x0 total-gps=3089
[ 62.394617] rcu-torture: Stopping rcu_torture_stats task
[ 62.395659] rcu-torture: rtc: 0000000000000000 VER: 1674 tfle: 0 rta: 1674 rtaf: 0 rtf: 1665 rtmbe: 0 rtmbkf: 0/1631 rtbe: 0 rtbke: 0 rtbf: 0 rtb: 0 nt: 112584 onoff: 9/9:11/11 51,828:20,860 2856:3186 (HZ=1000) barrier: 296/296:0 read-exits: 80 nocb-toggles: 162:150
[ 62.399926] rcu-torture: Reader Pipe: 178129249 7810 0 0 0 0 0 0 0 0 0
[ 62.401121] rcu-torture: Reader Batch: 178118693 18366 0 0 0 0 0 0 0 0 0
[ 62.402350] rcu-torture: Free-Block Circulation: 1673 1673 1672 1671 1670 1669 1668 1667 1666 1665 0
[ 62.404008] rcu-torture: rcu_torture_stats is stopping
[ 62.404969] rcu_torture_cleanup: Invoking rcu_barrier+0x0/0x500().
[ 62.447915] stackdepot: allocating hash table of 32768 entries via kvcalloc
[ 62.449731] mem_dump_obj() slab test: rcu_torture_stats = 0000000000000000, &rhp = ffffc9000051be80, rhp = ffff888007296000, &z = ffffffff836658c0
[ 62.452089] mem_dump_obj(ZERO_SIZE_PTR): zero-size pointer
[ 62.453080] mem_dump_obj(NULL): NULL pointer
[ 62.453851] mem_dump_obj(ffffc9000051be80): 4-page vmalloc region starting at 0xffffc90000518000 allocated at kernel_clone+0x99/0x3a0
[ 62.456002] mem_dump_obj(ffff888007296000): slab rcuscale start ffff888007296000 pointer offset 0 size 136 allocated at rcu_torture_cleanup+0x4ad/0x960
[ 62.458415] kmem_cache_alloc+0x1f3/0x210
[ 62.459199] rcu_torture_cleanup+0x4ad/0x960
[ 62.460022] torture_shutdown+0xf5/0x220
[ 62.460775] kthread+0xe0/0x110
[ 62.461398] ret_from_fork+0x2f/0x40
[ 62.462103] ret_from_fork_asm+0x1a/0x30
[ 62.462860] mem_dump_obj(ffff888007296008): slab rcuscale start ffff888007296000 pointer offset 8 size 136 allocated at rcu_torture_cleanup+0x4ad/0x960
[ 62.465268] kmem_cache_alloc+0x1f3/0x210
[ 62.466046] rcu_torture_cleanup+0x4ad/0x960
[ 62.466866] torture_shutdown+0xf5/0x220
[ 62.467622] kthread+0xe0/0x110
[ 62.468247] ret_from_fork+0x2f/0x40
[ 62.468950] ret_from_fork_asm+0x1a/0x30
[ 62.469705] mem_dump_obj(ffffffff836658c0): non-slab/vmalloc memory
[ 62.470888] mem_dump_obj() kmalloc test: rcu_torture_stats = 0000000000000000, &rhp = ffffc9000051be80, rhp = ffff888006186230
[ 62.472920] mem_dump_obj(kmalloc ffff888006186230): slab kmalloc-16 start ffff888006186230 pointer offset 0 size 16
[ 62.474779] mem_dump_obj(kmalloc ffff888006186238): slab kmalloc-16 start ffff888006186230 pointer offset 8 size 16
[ 62.476656] mem_dump_obj() vmalloc test: rcu_torture_stats = 0000000000000000, &rhp = ffffc9000051be80, rhp = ffffc90000029000
[ 62.478687] mem_dump_obj(vmalloc ffffc90000029000): 1-page vmalloc region starting at 0xffffc90000029000 allocated at rcu_torture_cleanup+0x624/0x960
[ 62.481077] mem_dump_obj(vmalloc ffffc90000029008): 1-page vmalloc region starting at 0xffffc90000029000 allocated at rcu_torture_cleanup+0x624/0x960
[ 62.483467] rcu-torture: rtc: 0000000000000000 VER: 1674 tfle: 0 rta: 1674 rtaf: 0 rtf: 1665 rtmbe: 0 rtmbkf: 0/1631 rtbe: 0 rtbke: 0 rtbf: 0 rtb: 0 nt: 112584 onoff: 9/9:11/11 51,828:20,860 2856:3186 (HZ=1000) barrier: 296/296:0 read-exits: 80 nocb-toggles: 162:150
[ 62.487678] rcu-torture: Reader Pipe: 178129249 7810 0 0 0 0 0 0 0 0 0
[ 62.488898] rcu-torture: Reader Batch: 178118693 18366 0 0 0 0 0 0 0 0 0
[ 62.490117] rcu-torture: Free-Block Circulation: 1673 1673 1672 1671 1670 1669 1668 1667 1666 1665 0
[ 62.491771] rcu-torture:--- End of test: SUCCESS: nreaders=7 nfakewriters=4 stat_interval=15 verbose=1 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4 shutdown_secs=60 stall_cpu=0 stall_cpu_holdoff=10 stall_cpu_irqsoff=0 stall_cpu_block=0 n_barrier_cbs=4 onoff_interval=1000 onoff_holdoff=30 read_exit_delay=13 read_exit_burst=16 nocbs_nthreads=8 nocbs_toggle=1000 test_nmis=0
[ 62.499904] i2c i2c-0: shutdown
[ 62.500469] alarmtimer alarmtimer.0.auto: shutdown
[ 62.501353] psmouse serio1: shutdown
[ 62.502306] atkbd serio0: shutdown
[ 62.503042] i8042 i8042: shutdown
[ 62.503695] platform Fixed MDIO bus.0: shutdown
[ 62.504634] serial8250 serial8250: shutdown
[ 62.505448] platform pcspkr: shutdown
[ 62.506117] platform regulatory.0: shutdown
[ 62.506890] serial 00:04: shutdown
[ 62.507510] pnp 00:03: shutdown
[ 62.508087] i8042 aux 00:02: shutdown
[ 62.508748] i8042 kbd 00:01: shutdown
[ 62.509412] rtc_cmos 00:00: shutdown
[ 62.510139] platform PNP0103:00: shutdown
[ 62.510865] platform QEMU0002:00: shutdown
[ 62.511667] i801_smbus 0000:00:1f.3: shutdown
[ 62.512660] ahci 0000:00:1f.2: shutdown
[ 62.513584] pci 0000:00:1f.0: shutdown
[ 62.514269] pci 0000:00:01.0: shutdown
[ 62.514950] pci 0000:00:00.0: shutdown
[ 62.515685] ACPI: PM: Preparing to enter system sleep state S5
[ 62.516940] PM: Calling mce_syscore_shutdown+0x0/0x10
[ 62.517899] PM: Calling i8259A_shutdown+0x0/0x20
[ 62.518761] reboot: Power down
On Fri, Feb 02, 2024 at 03:26:14PM +0100, Jonas Oberhauser wrote:
>
> Am 2/2/2024 um 2:04 PM schrieb Paul E. McKenney:
> > Hello!
> >
> > Starting with next-20240130 (and perhaps a bit earlier), rcutorture gets
> > what initially looked like early-boot hangs, but only when running on
> > dual-socket x86 systems [1], as it it works just fine on my x86 laptop [2].
> > But when running on dual-socket systems, this happens all the time,
> > perhaps because rcutorture works hard to split each guest OS across a
> > socket boundary.
> >
> > This is the reproducer:
> >
> > tools/testing/selftests/rcutorture/bin/kvm.sh --allcpus --duration 1m --configs "10*TREE01" --trust-make
> >
> > By "looked like early-boot hangs" I mean that qemu was quite happy,
> > but there was absolutely no console output.
> >
> > Bisection identified this commit:
> >
> > 5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
> >
> > Reverting this commit made the problem go away. Except that it is really
> > hard to imagine this commit having any effect whatsoever on early boot
> > execution. Of course, this might be a failure of imagination on my part,
> > so I enlisted the aid of gdb:
> >
> > tools/testing/selftests/rcutorture/bin/kvm.sh --allcpus --duration 1m --configs "TREE01" --trust-make --gdb
> >
> > After following the resulting gdb startup instructions and waiting for
> > about ten seconds, I hit control-C on the gdb window and then:
> >
> > (gdb) bt
> > #0 default_idle () at arch/x86/kernel/process.c:743
> > #1 0xffffffff81e94d34 in default_idle_call () at kernel/sched/idle.c:97
> > #2 0xffffffff810d746d in cpuidle_idle_call () at kernel/sched/idle.c:170
> > #3 do_idle () at kernel/sched/idle.c:312
> > #4 0xffffffff810d76a4 in cpu_startup_entry (state=state@entry=CPUHP_ONLINE)
> > at kernel/sched/idle.c:410
> > #5 0xffffffff81e95417 in rest_init () at init/main.c:730
> > #6 0xffffffff8329adf2 in start_kernel () at init/main.c:1067
> > #7 0xffffffff832a5038 in x86_64_start_reservations (
> > real_mode_data=real_mode_data@entry=0x13d50 <exception_stacks+32080> <error: Cannot access memory at address 0x13d50>) at arch/x86/kernel/head64.c:555
> > #8 0xffffffff832a513c in x86_64_start_kernel (
> > real_mode_data=0x13d50 <exception_stacks+32080> <error: Cannot access memory at address 0x13d50>) at arch/x86/kernel/head64.c:536
> > #9 0xffffffff810001d2 in secondary_startup_64 ()
> > at arch/x86/kernel/head_64.S:461
> > #10 0x0000000000000000 in ?? ()
> > (gdb) print jiffies
> > $1 = 4294676330
> > (gdb) print system_state
> > $2 = SYSTEM_RUNNING
> >
> > In other words, the system really has booted, and at least one CPU is
> > happily idling in the idle loop. And another CPU is (maybe not quite
> > so happily) running rcutorture:
> >
> > (gdb) thread 6
> > [Switching to thread 6 (Thread 1.6)]
> > #0 0xffffffff8111160b in rcu_torture_one_read (
> > trsp=trsp@entry=0xffffc900004abe90, myid=myid@entry=4)
> > at kernel/rcu/rcutorture.c:2003
> > 2003 completed = cur_ops->get_gp_seq();
> > (gdb) bt
> > #0 0xffffffff8111160b in rcu_torture_one_read (
> > trsp=trsp@entry=0xffffc900004abe90, myid=myid@entry=4)
> > at kernel/rcu/rcutorture.c:2003
> > #1 0xffffffff81111bef in rcu_torture_reader (arg=0x4 <fixed_percpu_data+4>)
> > at kernel/rcu/rcutorture.c:2097
> > #2 0xffffffff810af3e0 in kthread (_create=0xffff8880047aa480)
> > at kernel/kthread.c:388
> > #3 0xffffffff8103af1f in ret_from_fork (prev=<optimized out>,
> > regs=0xffffc900004abf58, fn=0xffffffff810af300 <kthread>,
> > fn_arg=0xffff8880047aa480) at arch/x86/kernel/process.c:147
> > #4 0xffffffff8100247a in ret_from_fork_asm () at arch/x86/entry/entry_64.S:242
> > #5 0x0000000000000000 in ?? ()
> >
> > So the system really did boot and is running just fine. It is just that
> > there is no console output. Details, details!
> >
> > Is there anything I can do to some combination of workqueues and printk
> > to help debug this? Or that I can do to anything else, as I am not
> > feeling all that picky. ;-)
>
> Just to exclude one source of troubles, have you tried turning all atomics
> into full barriers and seen if the issue still reproduces?
Good point, and if this sort of thing happens frequently, perhaps there
should be an easy way of doing this. One crude hack that might come
pretty close would be to redefine the barrier() macro to be smp_mb().
But as noted earlier, -ENOREPRODUCE on today's -next. I will try the
next several -next releases. But if they all get -ENOREPRODUCE, I owe
everyone on CC an apology for having sent this report out before trying
next-20240202. :-/
Thanx, Paul
> jonas
>
>
> >
> > Thanx, Paul
> >
> > [1] The dual-socket system is an 80-hardware-thread (20 cores per socket)
> > system with model name Intel(R) Xeon(R) Gold 6138 CPU @ 2.00GHz.
> > I get the same results when using either of these compilers:
> > gcc version 8.5.0 20210514 (Red Hat 8.5.0-21) (GCC)
> > gcc version 11.4.1 20230605 (Red Hat 11.4.1-2) (GCC)
> >
> > [2] My laptop is a 16-hardware-thread (8 cores) single-socket system with
> > model name "Intel(R) Core(TM) i9-10885H CPU @ 2.40GHz" and
> > gcc version 11.4.0 (Ubuntu 11.4.0-1ubuntu1~22.04).
>
Hello,
On Fri, Feb 02, 2024 at 08:35:51AM -0800, Paul E. McKenney wrote:
> Good point, and if this sort of thing happens frequently, perhaps there
> should be an easy way of doing this. One crude hack that might come
> pretty close would be to redefine the barrier() macro to be smp_mb().
>
> But as noted earlier, -ENOREPRODUCE on today's -next. I will try the
> next several -next releases. But if they all get -ENOREPRODUCE, I owe
> everyone on CC an apology for having sent this report out before trying
> next-20240202. :-/
I think I saw that problem too but could reproduce it with or without the
workqueue changes, so I did the lazy thing "oh well, somebody is gonna fix
that" and just tested as-is. It's a bit worrying that ppl don't seem to
already know what the culprit is. Hmm... I can't reproduce it anymore
either.
So, there is some chance that this may really be a subtle breakage. If you
ever see it happening again, triggering sysrq-t and capturing the dmesg
output (network should still work fine, so these shouldn't be too difficult)
may help. sysrq-t has workqueue state dump at the end which should clearly
indicate if anything is stalled in workqueue.
That said, another data point. In my test setup, I use the earlyprintk boot
option which enables console output way before than workqueue becomes
operational, so having on console output at all is highly unlikely to be
indicative of workqueue problem. My memory is hazy but it seems like I can
no longer reproduce the problem on the same git commit. Maybe it was a
problem on the qemu side?
Thanks.
--
tejun
On 2024-02-02, "Paul E. McKenney" <[email protected]> wrote:
>> The printk ringbuffer contents would certainly be interesting.
>>
>> If you build the GDB scripts (CONFIG_GDB_SCRIPTS) then you will have:
>>
>> (gdb) lx-dmesg
>
> This says no such command even though I do have CONFIG_GDB_SCRIPTS=y
> in my .config.
You actually need to build them as well. The target is "scripts_gdb"
And you probably need to add:
add-auto-load-safe-path /path/to/your/kernel/build/directory
to your .gdbinit
(This is documented in Documentation/dev-tools/gdb-kernel-debugging.rst)
>> As an alternative, you could copy the contents of
>> Documentation/admin-guide/kdump/gdbmacros.txt into your .gdbinit and
>> then will have:
>>
>> (gdb) dmesg
>
> This one hangs.
:-/ I will look into this.
> On the other hand, next-20240202 doesn't show the problem. No idea
> what might have changed. :-/
Did you check the backtrace on all the "threads"? I would expect one of
them has tty in it and is probably deadlocked. There are known problems
that if a WARN or lockdep triggers while holding the port lock, that CPU
will deadlock itself. That has the effect that no output is generated,
but all the other CPUs will run fine. And even printk() calls will
happily store into the ringbuffer because they use trylock for printing
and the deadlocked CPU will be holding the lock.
John
On Fri, Feb 02, 2024 at 06:08:25PM +0106, John Ogness wrote:
> On 2024-02-02, "Paul E. McKenney" <[email protected]> wrote:
> >> The printk ringbuffer contents would certainly be interesting.
> >>
> >> If you build the GDB scripts (CONFIG_GDB_SCRIPTS) then you will have:
> >>
> >> (gdb) lx-dmesg
> >
> > This says no such command even though I do have CONFIG_GDB_SCRIPTS=y
> > in my .config.
>
> You actually need to build them as well. The target is "scripts_gdb"
>
> And you probably need to add:
>
> add-auto-load-safe-path /path/to/your/kernel/build/directory
>
> to your .gdbinit
>
> (This is documented in Documentation/dev-tools/gdb-kernel-debugging.rst)
Thank you! Next time I am in a similar situation, I will pay more
attention to the documentation.
> >> As an alternative, you could copy the contents of
> >> Documentation/admin-guide/kdump/gdbmacros.txt into your .gdbinit and
> >> then will have:
> >>
> >> (gdb) dmesg
> >
> > This one hangs.
>
> :-/ I will look into this.
>
> > On the other hand, next-20240202 doesn't show the problem. No idea
> > what might have changed. :-/
>
> Did you check the backtrace on all the "threads"? I would expect one of
> them has tty in it and is probably deadlocked. There are known problems
> that if a WARN or lockdep triggers while holding the port lock, that CPU
> will deadlock itself. That has the effect that no output is generated,
> but all the other CPUs will run fine. And even printk() calls will
> happily store into the ringbuffer because they use trylock for printing
> and the deadlocked CPU will be holding the lock.
Again, thank you, and another thing for me to try should this start
happening again.
Thanx, Paul
On Fri, Feb 02, 2024 at 06:56:28AM -1000, Tejun Heo wrote:
> Hello,
>
> On Fri, Feb 02, 2024 at 08:35:51AM -0800, Paul E. McKenney wrote:
> > Good point, and if this sort of thing happens frequently, perhaps there
> > should be an easy way of doing this. One crude hack that might come
> > pretty close would be to redefine the barrier() macro to be smp_mb().
> >
> > But as noted earlier, -ENOREPRODUCE on today's -next. I will try the
> > next several -next releases. But if they all get -ENOREPRODUCE, I owe
> > everyone on CC an apology for having sent this report out before trying
> > next-20240202. :-/
>
> I think I saw that problem too but could reproduce it with or without the
> workqueue changes, so I did the lazy thing "oh well, somebody is gonna fix
> that" and just tested as-is. It's a bit worrying that ppl don't seem to
> already know what the culprit is. Hmm... I can't reproduce it anymore
> either.
Glad that it is not just me! I think... ;-)
> So, there is some chance that this may really be a subtle breakage. If you
> ever see it happening again, triggering sysrq-t and capturing the dmesg
> output (network should still work fine, so these shouldn't be too difficult)
> may help. sysrq-t has workqueue state dump at the end which should clearly
> indicate if anything is stalled in workqueue.
Good point, if it does recur, I could try it on bare metal.
> That said, another data point. In my test setup, I use the earlyprintk boot
> option which enables console output way before than workqueue becomes
> operational, so having on console output at all is highly unlikely to be
> indicative of workqueue problem. My memory is hazy but it seems like I can
> no longer reproduce the problem on the same git commit. Maybe it was a
> problem on the qemu side?
It might have been a qemu issue, but I am using the same qemu.
No idea!
But I will try earlyprintk if this happens again.
Thanx, Paul
On Fri 2024-02-02 09:40:05, Paul E. McKenney wrote:
> On Fri, Feb 02, 2024 at 06:56:28AM -1000, Tejun Heo wrote:
> > Hello,
> >
> > On Fri, Feb 02, 2024 at 08:35:51AM -0800, Paul E. McKenney wrote:
> > > Good point, and if this sort of thing happens frequently, perhaps there
> > > should be an easy way of doing this. One crude hack that might come
> > > pretty close would be to redefine the barrier() macro to be smp_mb().
> > >
> > > But as noted earlier, -ENOREPRODUCE on today's -next. I will try the
> > > next several -next releases. But if they all get -ENOREPRODUCE, I owe
> > > everyone on CC an apology for having sent this report out before trying
> > > next-20240202. :-/
> >
> > I think I saw that problem too but could reproduce it with or without the
> > workqueue changes, so I did the lazy thing "oh well, somebody is gonna fix
> > that" and just tested as-is. It's a bit worrying that ppl don't seem to
> > already know what the culprit is. Hmm... I can't reproduce it anymore
> > either.
>
> Glad that it is not just me! I think... ;-)
>
> > So, there is some chance that this may really be a subtle breakage. If you
> > ever see it happening again, triggering sysrq-t and capturing the dmesg
> > output (network should still work fine, so these shouldn't be too difficult)
> > may help. sysrq-t has workqueue state dump at the end which should clearly
> > indicate if anything is stalled in workqueue.
>
> Good point, if it does recur, I could try it on bare metal.
Please, me, John, and Sergey know if anyone see this again. I do not
feel comfortable when there is problem which might make consoles calm.
Well, there is no queued printk change. Also I do not see anything
obvious in the changes added to 6.7 which might cause this behavior.
> > That said, another data point. In my test setup, I use the earlyprintk boot
> > option which enables console output way before than workqueue becomes
> > operational, so having on console output at all is highly unlikely to be
> > indicative of workqueue problem. My memory is hazy but it seems like I can
> > no longer reproduce the problem on the same git commit. Maybe it was a
> > problem on the qemu side?
>
> It might have been a qemu issue, but I am using the same qemu.
In theory, it might also be caused by a change in the serial console
driver. But I do not see anything obvious there either.
Best Regards,
Petr
On (24/02/05 14:07), Petr Mladek wrote:
> > Good point, if it does recur, I could try it on bare metal.
>
> Please, me, John, and Sergey know if anyone see this again. I do not
> feel comfortable when there is problem which might make consoles calm.
Agreed.
> Bisection identified this commit:
> 5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
That commit triggered early boot use-after-free (per kasan) on
my system, which probably could derail some things.
On Mon, Feb 05, 2024 at 09:45:53AM -0800, Paul E. McKenney wrote:
> On Mon, Feb 05, 2024 at 10:25:15PM +0900, Sergey Senozhatsky wrote:
> > On (24/02/05 14:07), Petr Mladek wrote:
> > > > Good point, if it does recur, I could try it on bare metal.
> > >
> > > Please, me, John, and Sergey know if anyone see this again. I do not
> > > feel comfortable when there is problem which might make consoles calm.
> >
> > Agreed.
> >
> > > Bisection identified this commit:
> > > 5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
> >
> > That commit triggered early boot use-after-free (per kasan) on
> > my system, which probably could derail some things.
>
> And enabling KASAN on next-20240130 got me that same KASAN report and
> also suppressed the misbehavior, which is not surprising given that
> KASAN quarantines free memory for some time. Plus enabling KASAN
> on recent -next does not trigger that KASAN report.
>
> So my guess is that we can attribute my oddball test failures to
> that use after free. But I will of course continue testing.
Can someone paste the KASAN report?
Thanks.
--
tejun
On Mon, Feb 05, 2024 at 10:25:15PM +0900, Sergey Senozhatsky wrote:
> On (24/02/05 14:07), Petr Mladek wrote:
> > > Good point, if it does recur, I could try it on bare metal.
> >
> > Please, me, John, and Sergey know if anyone see this again. I do not
> > feel comfortable when there is problem which might make consoles calm.
>
> Agreed.
>
> > Bisection identified this commit:
> > 5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
>
> That commit triggered early boot use-after-free (per kasan) on
> my system, which probably could derail some things.
And enabling KASAN on next-20240130 got me that same KASAN report and
also suppressed the misbehavior, which is not surprising given that
KASAN quarantines free memory for some time. Plus enabling KASAN
on recent -next does not trigger that KASAN report.
So my guess is that we can attribute my oddball test failures to
that use after free. But I will of course continue testing.
Thanx, Paul
On Mon, Feb 05, 2024 at 07:46:48AM -1000, Tejun Heo wrote:
> On Mon, Feb 05, 2024 at 09:45:53AM -0800, Paul E. McKenney wrote:
> > On Mon, Feb 05, 2024 at 10:25:15PM +0900, Sergey Senozhatsky wrote:
> > > On (24/02/05 14:07), Petr Mladek wrote:
> > > > > Good point, if it does recur, I could try it on bare metal.
> > > >
> > > > Please, me, John, and Sergey know if anyone see this again. I do not
> > > > feel comfortable when there is problem which might make consoles calm.
> > >
> > > Agreed.
> > >
> > > > Bisection identified this commit:
> > > > 5797b1c18919 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
> > >
> > > That commit triggered early boot use-after-free (per kasan) on
> > > my system, which probably could derail some things.
> >
> > And enabling KASAN on next-20240130 got me that same KASAN report and
> > also suppressed the misbehavior, which is not surprising given that
> > KASAN quarantines free memory for some time. Plus enabling KASAN
> > on recent -next does not trigger that KASAN report.
> >
> > So my guess is that we can attribute my oddball test failures to
> > that use after free. But I will of course continue testing.
>
> Can someone paste the KASAN report?
Here you go!
Thanx, Paul
------------------------------------------------------------------------
[ 0.316453] ==================================================================
[ 0.317646] BUG: KASAN: use-after-free in wq_update_node_max_active+0x123/0x810
[ 0.318851] Read of size 8 at addr ffff88802109d788 by task swapper/0/0
[ 0.319937]
[ 0.320195] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.8.0-rc2-next-20240130 #7935
[ 0.321453] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[ 0.323299] Call Trace:
[ 0.323700] <TASK>
[ 0.324043] dump_stack_lvl+0x37/0x50
[ 0.324653] print_report+0xcb/0x620
[ 0.325249] ? wq_update_node_max_active+0x123/0x810
[ 0.326066] kasan_report+0xaf/0xe0
[ 0.326639] ? wq_update_node_max_active+0x123/0x810
[ 0.327455] kasan_check_range+0x39/0x1c0
[ 0.328119] wq_update_node_max_active+0x123/0x810
[ 0.328903] ? __pfx_mutex_lock+0x10/0x10
[ 0.329567] apply_wqattrs_commit+0x4e4/0xb80
[ 0.330289] ? __pfx_mutex_lock+0x10/0x10
[ 0.330946] apply_workqueue_attrs_locked+0x9e/0x110
[ 0.331764] alloc_workqueue+0xf76/0x18d0
[ 0.332432] ? __pfx_alloc_workqueue+0x10/0x10
[ 0.333189] ? kasan_unpoison+0x27/0x60
[ 0.333818] ? kasan_unpoison+0x27/0x60
[ 0.334455] ? __kasan_slab_alloc+0x30/0x70
[ 0.335147] ? __pfx_mutex_unlock+0x10/0x10
[ 0.335831] ? idr_alloc_u32+0x291/0x2c0
[ 0.336479] ? mutex_unlock+0x7e/0xd0
[ 0.337085] workqueue_init_early+0x69a/0xe70
[ 0.337800] ? __pfx_workqueue_init_early+0x10/0x10
[ 0.338605] ? kmem_cache_create_usercopy+0xcc/0x230
[ 0.339421] start_kernel+0x141/0x380
[ 0.340023] x86_64_start_reservations+0x18/0x30
[ 0.340788] x86_64_start_kernel+0xcf/0xe0
[ 0.341465] secondary_startup_64_no_verify+0x16d/0x17b
[ 0.342334] </TASK>
[ 0.342703]
[ 0.342954] The buggy address belongs to the physical page:
[ 0.343899] page:00000000a19a7ad3 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x2109d
[ 0.345471] flags: 0x100000000000000(node=0|zone=1)
[ 0.346297] page_type: 0xffffffff()
[ 0.346882] raw: 0100000000000000 ffffea0000842748 ffffea0000842748 0000000000000000
[ 0.348184] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[ 0.349518] page dumped because: kasan: bad access detected
[ 0.350457]
[ 0.350706] Memory state around the buggy address:
[ 0.351532] ffff88802109d680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 0.352748] ffff88802109d700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 0.353968] >ffff88802109d780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 0.355221] ^
[ 0.355808] ffff88802109d800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 0.357161] ffff88802109d880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 0.358439] ==================================================================
Hello,
On Mon, Feb 05, 2024 at 11:41:10AM -0800, Paul E. McKenney wrote:
> [ 0.316453] ==================================================================
> [ 0.317646] BUG: KASAN: use-after-free in wq_update_node_max_active+0x123/0x810
> [ 0.318851] Read of size 8 at addr ffff88802109d788 by task swapper/0/0
Ah, that one is fixed by 15930da42f89 ("workqueue: Don't call
cpumask_test_cpu() with -1 CPU in wq_update_node_max_active()"). I have a
hard time imagining that having anything to do with console being quiet tho.
It's a cpumask bit test targeting cpu -1 and the result gets overwritten
later during boot.
Thanks.
--
tejun
On Mon, Feb 05, 2024 at 10:30:25AM -1000, Tejun Heo wrote:
> Hello,
>
> On Mon, Feb 05, 2024 at 11:41:10AM -0800, Paul E. McKenney wrote:
> > [ 0.316453] ==================================================================
> > [ 0.317646] BUG: KASAN: use-after-free in wq_update_node_max_active+0x123/0x810
> > [ 0.318851] Read of size 8 at addr ffff88802109d788 by task swapper/0/0
>
> Ah, that one is fixed by 15930da42f89 ("workqueue: Don't call
> cpumask_test_cpu() with -1 CPU in wq_update_node_max_active()"). I have a
> hard time imagining that having anything to do with console being quiet tho.
> It's a cpumask bit test targeting cpu -1 and the result gets overwritten
> later during boot.
Thank you for confirming!
If the silent console comes up again, I will beat up on that more.
Thanx, Paul