Calling component_add starts loading the firmware, the callback function
writes the program to the amplifiers. If the module resets the
amplifiers after component_add, it happens that one of the amplifiers
does not work because the reset and program writing are interleaving.
Call tas2781_reset before component_add to ensure reliable
initialization.
Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
CC: [email protected]
Signed-off-by: Gergo Koteles <[email protected]>
---
sound/pci/hda/tas2781_hda_i2c.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/pci/hda/tas2781_hda_i2c.c b/sound/pci/hda/tas2781_hda_i2c.c
index fb802802939e..0baaaff94c6f 100644
--- a/sound/pci/hda/tas2781_hda_i2c.c
+++ b/sound/pci/hda/tas2781_hda_i2c.c
@@ -675,14 +675,14 @@ static int tas2781_hda_i2c_probe(struct i2c_client *clt)
pm_runtime_put_autosuspend(tas_priv->dev);
+ tas2781_reset(tas_priv);
+
ret = component_add(tas_priv->dev, &tas2781_hda_comp_ops);
if (ret) {
dev_err(tas_priv->dev, "Register component failed: %d\n", ret);
pm_runtime_disable(tas_priv->dev);
- goto err;
}
- tas2781_reset(tas_priv);
err:
if (ret)
tas2781_hda_remove(&clt->dev);
base-commit: ffc253263a1375a65fa6c9f62a893e9767fbebfa
--
2.43.0
On Thu, 14 Dec 2023 00:49:20 +0100,
Gergo Koteles wrote:
>
> Calling component_add starts loading the firmware, the callback function
> writes the program to the amplifiers. If the module resets the
> amplifiers after component_add, it happens that one of the amplifiers
> does not work because the reset and program writing are interleaving.
>
> Call tas2781_reset before component_add to ensure reliable
> initialization.
>
> Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver")
> CC: [email protected]
> Signed-off-by: Gergo Koteles <[email protected]>
Thanks, applied now.
Takashi