From: Yu Kuai <[email protected]>
commit 1243172d5894 ("nbd: use pr_err to output error message") tries
to define pr_fmt and use short pr_err() to output error message,
however, the definition is missed.
Fixes: 1243172d5894 ("nbd: use pr_err to output error message")
Signed-off-by: Yu Kuai <[email protected]>
---
drivers/block/nbd.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 07f3c139a3d7..94a1602adab5 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -44,6 +44,9 @@
#include <linux/nbd-netlink.h>
#include <net/genetlink.h>
+#undef pr_fmt
+#define pr_fmt(fmt) "nbd: " fmt
+
#define CREATE_TRACE_POINTS
#include <trace/events/nbd.h>
--
2.31.1
?? 2022/07/06 17:33, Yu Kuai д??:
> From: Yu Kuai <[email protected]>
>
> commit 1243172d5894 ("nbd: use pr_err to output error message") tries
> to define pr_fmt and use short pr_err() to output error message,
> however, the definition is missed.
friendly ping ...
>
> Fixes: 1243172d5894 ("nbd: use pr_err to output error message")
> Signed-off-by: Yu Kuai <[email protected]>
> ---
> drivers/block/nbd.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
> index 07f3c139a3d7..94a1602adab5 100644
> --- a/drivers/block/nbd.c
> +++ b/drivers/block/nbd.c
> @@ -44,6 +44,9 @@
> #include <linux/nbd-netlink.h>
> #include <net/genetlink.h>
>
> +#undef pr_fmt
> +#define pr_fmt(fmt) "nbd: " fmt
> +
> #define CREATE_TRACE_POINTS
> #include <trace/events/nbd.h>
>
>
On Mon, 2022-07-18 at 21:52 +0800, Yu Kuai wrote:
> 在 2022/07/06 17:33, Yu Kuai 写道:
> > From: Yu Kuai <[email protected]>
> >
> > commit 1243172d5894 ("nbd: use pr_err to output error message") tries
> > to define pr_fmt and use short pr_err() to output error message,
> > however, the definition is missed.
>
> friendly ping ...
[]
> > diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
[]
> > @@ -44,6 +44,9 @@
> > #include <linux/nbd-netlink.h>
> > #include <net/genetlink.h>
> >
> > +#undef pr_fmt
> > +#define pr_fmt(fmt) "nbd: " fmt
> > +
Typically, this #define is place before all #include lines
so there is no need for an #undef
Hi !
在 2022/07/18 22:32, Joe Perches 写道:
> On Mon, 2022-07-18 at 21:52 +0800, Yu Kuai wrote:
>> 在 2022/07/06 17:33, Yu Kuai 写道:
>>> From: Yu Kuai <[email protected]>
>>>
>>> commit 1243172d5894 ("nbd: use pr_err to output error message") tries
>>> to define pr_fmt and use short pr_err() to output error message,
>>> however, the definition is missed.
>> friendly ping ...
> []
>>> diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
> []
>>> @@ -44,6 +44,9 @@
>>> #include <linux/nbd-netlink.h>
>>> #include <net/genetlink.h>
>>>
>>> +#undef pr_fmt
>>> +#define pr_fmt(fmt) "nbd: " fmt
>>> +
> Typically, this #define is place before all #include lines
> so there is no need for an #undef
Thanks for you advice, I'll do that in v2.
Kuai
Hi!
在 2022/07/20 19:46, Yu Kuai 写道:
> Hi !
>
> 在 2022/07/18 22:32, Joe Perches 写道:
>> On Mon, 2022-07-18 at 21:52 +0800, Yu Kuai wrote:
>>> 在 2022/07/06 17:33, Yu Kuai 写道:
>>>> From: Yu Kuai <[email protected]>
>>>>
>>>> commit 1243172d5894 ("nbd: use pr_err to output error message") tries
>>>> to define pr_fmt and use short pr_err() to output error message,
>>>> however, the definition is missed.
>>> friendly ping ...
>> []
>>>> diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
>> []
>>>> @@ -44,6 +44,9 @@
>>>> #include <linux/nbd-netlink.h>
>>>> #include <net/genetlink.h>
>>>> +#undef pr_fmt
>>>> +#define pr_fmt(fmt) "nbd: " fmt
>>>> +
I tried to remove the #undef:
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -44,7 +44,6 @@
#include <linux/nbd-netlink.h>
#include <net/genetlink.h>
#define pr_fmt(fmt) "nbd: " fmt
And then following warning is triggered:
drivers/block/nbd.c:47: warning: "pr_fmt" redefined
47 | #define pr_fmt(fmt) "nbd: " fmt
It semms that keeping that #undef is the right thing to do.
Thanks,
Kuai
>> Typically, this #define is place before all #include lines
>> so there is no need for an #undef
>
> Thanks for you advice, I'll do that in v2.
>
> Kuai
>
> .
>
Hi!
在 2022/07/20 19:46, Yu Kuai 写道:
> Hi !
>
> 在 2022/07/18 22:32, Joe Perches 写道:
>> On Mon, 2022-07-18 at 21:52 +0800, Yu Kuai wrote:
>>> 在 2022/07/06 17:33, Yu Kuai 写道:
>>>> From: Yu Kuai <[email protected]>
>>>>
>>>> commit 1243172d5894 ("nbd: use pr_err to output error message") tries
>>>> to define pr_fmt and use short pr_err() to output error message,
>>>> however, the definition is missed.
>>> friendly ping ...
>> []
>>>> diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
>> []
>>>> @@ -44,6 +44,9 @@
>>>> #include <linux/nbd-netlink.h>
>>>> #include <net/genetlink.h>
>>>> +#undef pr_fmt
>>>> +#define pr_fmt(fmt) "nbd: " fmt
>>>> +
>> Typically, this #define is place before all #include lines
>> so there is no need for an #undef
I tried to remove the #undef:
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -44,7 +44,6 @@
#include <linux/nbd-netlink.h>
#include <net/genetlink.h>
#define pr_fmt(fmt) "nbd: " fmt
And then following warning is triggered:
drivers/block/nbd.c:47: warning: "pr_fmt" redefined
47 | #define pr_fmt(fmt) "nbd: " fmt
It semms that keeping that #undef is the right thing to do.
Thanks,
Kuai
>
> Thanks for you advice, I'll do that in v2.
>
> Kuai
>
> .
>
On Sat, 2022-07-23 at 10:15 +0800, Yu Kuai wrote:
> Hi!
Hello.
> 在 2022/07/20 19:46, Yu Kuai 写道:
> > 在 2022/07/18 22:32, Joe Perches 写道:
> > > On Mon, 2022-07-18 at 21:52 +0800, Yu Kuai wrote:
> > > > 在 2022/07/06 17:33, Yu Kuai 写道:
> > > > > From: Yu Kuai <[email protected]>
> > > > >
> > > > > commit 1243172d5894 ("nbd: use pr_err to output error message") tries
> > > > > to define pr_fmt and use short pr_err() to output error message,
> > > > > however, the definition is missed.
> > > > friendly ping ...
> > > []
> > > > > diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
> > > []
> > > > > @@ -44,6 +44,9 @@
> > > > > #include <linux/nbd-netlink.h>
> > > > > #include <net/genetlink.h>
> > > > > +#undef pr_fmt
> > > > > +#define pr_fmt(fmt) "nbd: " fmt
> > > > > +
> > > Typically, this #define is place before all #include lines
> > > so there is no need for an #undef
>
> I tried to remove the #undef:
I'll repeat my message.
Move the #define before _any_ #include.
Also, there are some message that would need existing "nbd: " output
prefixes removed.
---
drivers/block/nbd.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index f5d098a148cbf..222f26ac5e96a 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -11,6 +11,8 @@
* (part of code stolen from loop.c)
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/major.h>
#include <linux/blkdev.h>
@@ -1950,8 +1952,8 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)
test_bit(NBD_DISCONNECT_REQUESTED, &nbd->flags)) ||
!refcount_inc_not_zero(&nbd->refs)) {
mutex_unlock(&nbd_index_mutex);
- pr_err("nbd: device at index %d is going down\n",
- index);
+ pr_err("device at index %d is going down\n",
+ index);
return -EINVAL;
}
}
@@ -1961,7 +1963,7 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)
if (!nbd) {
nbd = nbd_dev_add(index, 2);
if (IS_ERR(nbd)) {
- pr_err("nbd: failed to add new device\n");
+ pr_err("failed to add new device\n");
return PTR_ERR(nbd);
}
}
Hi!
在 2022/07/23 11:12, Joe Perches 写道:
> On Sat, 2022-07-23 at 10:15 +0800, Yu Kuai wrote:
>> Hi!
>
> Hello.
>
>> 在 2022/07/20 19:46, Yu Kuai 写道:
>>> 在 2022/07/18 22:32, Joe Perches 写道:
>>>> On Mon, 2022-07-18 at 21:52 +0800, Yu Kuai wrote:
>>>>> 在 2022/07/06 17:33, Yu Kuai 写道:
>>>>>> From: Yu Kuai <[email protected]>
>>>>>>
>>>>>> commit 1243172d5894 ("nbd: use pr_err to output error message") tries
>>>>>> to define pr_fmt and use short pr_err() to output error message,
>>>>>> however, the definition is missed.
>>>>> friendly ping ...
>>>> []
>>>>>> diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
>>>> []
>>>>>> @@ -44,6 +44,9 @@
>>>>>> #include <linux/nbd-netlink.h>
>>>>>> #include <net/genetlink.h>
>>>>>> +#undef pr_fmt
>>>>>> +#define pr_fmt(fmt) "nbd: " fmt
>>>>>> +
>>>> Typically, this #define is place before all #include lines
>>>> so there is no need for an #undef
>>
>> I tried to remove the #undef:
>
> I'll repeat my message.
>
> Move the #define before _any_ #include.
>
> Also, there are some message that would need existing "nbd: " output
> prefixes removed.
Thanks for your explanation, I do miss that.
Kuai
> ---
> drivers/block/nbd.c | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
> index f5d098a148cbf..222f26ac5e96a 100644
> --- a/drivers/block/nbd.c
> +++ b/drivers/block/nbd.c
> @@ -11,6 +11,8 @@
> * (part of code stolen from loop.c)
> */
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include <linux/major.h>
>
> #include <linux/blkdev.h>
> @@ -1950,8 +1952,8 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)
> test_bit(NBD_DISCONNECT_REQUESTED, &nbd->flags)) ||
> !refcount_inc_not_zero(&nbd->refs)) {
> mutex_unlock(&nbd_index_mutex);
> - pr_err("nbd: device at index %d is going down\n",
> - index);
> + pr_err("device at index %d is going down\n",
> + index);
> return -EINVAL;
> }
> }
> @@ -1961,7 +1963,7 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info)
> if (!nbd) {
> nbd = nbd_dev_add(index, 2);
> if (IS_ERR(nbd)) {
> - pr_err("nbd: failed to add new device\n");
> + pr_err("failed to add new device\n");
> return PTR_ERR(nbd);
> }
> }
>
>
> .
>