Hi,
On 2.4.13 release, i planed to update my kernel from 2.4.6 to 2.4.13 on
my Debian.woody.
But, after compiling an testing my usb-storage won?t work.
I searched the web and found a posting in this Kernel-List wich
described this Problem (Okt/2001) without a solving suggestion.
I tried with the new 2.4.15-pre4, but it won?t work with this Version
too.
Now im using 2.4.8, in which it works fine.
I took the old configs from 2.4.6 with "make oldconfig" to it,
so the fault shouldn?t be my Kernel-Configuration.
Some Infos:
my Hardware:
Siemens PII-600 Lifebook S4546
Debian woody
DataFab MD2-USB 2,5" IDE Disk on Usb,
info on Kernel 2.4.8:
greedy:~# cat /proc/scsi/usb-storage-0/0
Host scsi0: usb-storage
Vendor: OnSpec Electronic, Inc.
Product: USB Disk
Serial Number: E01B94DC1B
Protocol: Transparent SCSI
Transport: Bulk
GUID: 07c40103000000e01b94dc1b
greedy:~# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: TOSHIBA Model: MK1214GAP Rev: 1 A
Type: Direct-Access ANSI SCSI revision: 02
Please let me know if there are any further logs, configs you need for info?
Regards
Christoph
The Log of the usbmgr & usb-storage (sorry it is very big :(
So, I hope this is helpfull)
kernel: usb.c: registered new driver usbdevfs
kernel: usb.c: registered new driver hub
kernel: uhci.c: USB Universal Host Controller Interface driver v1.1
kernel: PCI: Found IRQ 15 for device 00:07.2
kernel: uhci.c: USB UHCI at I/O 0x1ca0, IRQ 15
kernel: usb.c: new USB bus registered, assigned bus number 1
kernel: uhci.c: detected 2 ports
kernel: usb.c: kmalloc IF c141fba0, numif 1
kernel: usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
kernel: usb.c: USB device number 1 default language ID 0x0
kernel: Product: USB UHCI-alt Root Hub
kernel: SerialNumber: 1ca0
kernel: hub.c: USB hub found
kernel: hub.c: 2 ports detected
kernel: hub.c: standalone hub
kernel: hub.c: ganged power switching
kernel: hub.c: global over-current protection
kernel: hub.c: Port indicators are not supported
kernel: hub.c: power on to power good time: 2ms
kernel: hub.c: hub controller current requirement: 0mA
kernel: hub.c: port removable status: RR
kernel: hub.c: local power source is good
kernel: hub.c: no over-current condition exists
kernel: hub.c: enabling power on all ports
kernel: usb.c: hub driver claimed interface c141fba0
kernel: usb.c: call_policy add, num 1 -- no FS yet
kernel: uhci.c: root-hub INT complete: port1: 80 port2: 93 data: 4
kernel: hub.c: port 2 connection change
kernel: hub.c: port 2, portstatus 101, change 1, 12 Mb/s
kernel: hub.c: port 2, portstatus 103, change 0, 12 Mb/s
kernel: hub.c: USB new device connect on bus1/2, assigned device number 2
kernel: usb.c: kmalloc IF c141fd60, numif 1
kernel: usb.c: new device strings: Mfr=0, Product=1, SerialNumber=0
kernel: usb.c: USB device number 2 default language ID 0x409
kernel: Product: General Purpose USB Hub
kernel: hub.c: USB hub found
kernel: hub.c: 2 ports detected
kernel: hub.c: standalone hub
kernel: hub.c: ganged power switching
kernel: hub.c: global over-current protection
kernel: hub.c: Port indicators are not supported
kernel: hub.c: power on to power good time: 100ms
kernel: hub.c: hub controller current requirement: 100mA
kernel: hub.c: port removable status: RR
kernel: hub.c: local power source is good
kernel: hub.c: no over-current condition exists
kernel: hub.c: enabling power on all ports
kernel: usb.c: hub driver claimed interface c141fd60
kernel: usb.c: kusbd: /sbin/hotplug add 2
kernel: usb.c: kusbd policy returned 0xfffffffe
kernel: SCSI subsystem driver Revision: 1.00
kernel: Initializing USB Mass Storage driver...
kernel: usb.c: registered new driver usb-storage
kernel: USB Mass Storage support registered.
usbmgr[723]: start 0.4.8
kernel: usb.c: registered new driver hid
kernel: hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <[email protected]>
kernel: hid-core.c: USB HID support drivers
kernel: mice: PS/2 mouse device common for all mice
usbmgr[726]: "hid" was loaded
usbmgr[726]: "mousedev" was loaded
usbmgr[726]: open error "host"
usbmgr[731]: mount /proc/bus/usb
usbmgr[726]: class:0x9 subclass:0x0 protocol:0x0
usbmgr[726]: USB device is matched the configuration
usbmgr[726]: "none" isn't loaded
usbmgr[726]: vendor:0x451 product:0x2036
usbmgr[726]: class:0x9 subclass:0x0 protocol:0x0
usbmgr[726]: USB device is matched the configuration
usbmgr[726]: "none" isn't loaded
kernel: uhci.c: root-hub INT complete: port1: 93 port2: 95 data: 2
kernel: hub.c: port 1 connection change
kernel: hub.c: port 1, portstatus 101, change 1, 12 Mb/s
kernel: hub.c: port 1, portstatus 103, change 0, 12 Mb/s
kernel: hub.c: USB new device connect on bus1/1, assigned device number 3
kernel: usb.c: kmalloc IF cc54cf00, numif 1
kernel: usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3
kernel: usb.c: USB device number 3 default language ID 0x409
kernel: Manufacturer: OnSpec Electronic, Inc.
kernel: Product: USB Disk
kernel: SerialNumber: E01B94DC1B
kernel: usb-storage: act_altsettting is 0
kernel: usb-storage: id_index calculated to be: 72
kernel: usb-storage: Array length appears to be: 74
kernel: usb-storage: USB Mass Storage device detected
kernel: usb-storage: Endpoints: In: 0xcb4273f4 Out: 0xcb4273e0 Int: 0x00000000 (Period 0)
kernel: usb-storage: New GUID 07c40103000000e01b94dc1b
kernel: usb-storage: GetMaxLUN command result is -32, data is 202
kernel: usb-storage: clearing endpoint halt for pipe 0x80000380
kernel: usb-storage: Transport: Bulk
kernel: usb-storage: Protocol: Transparent SCSI
kernel: usb-storage: *** thread sleeping.
kernel: scsi0 : SCSI emulation for USB Mass Storage devices
kernel: usb-storage: queuecommand() called
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: Command INQUIRY (6 bytes)
kernel: usb-storage: 12 00 00 00 ff 00 00 00 95 52 18 c0
kernel: usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN 0 L 255 F 128 CL 6
kernel: usb-storage: Bulk command transfer result=0
kernel: usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 255/255
kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
kernel: usb-storage: Bulk data transfer result 0x0
kernel: usb-storage: Attempting to get CSW...
kernel: usb-storage: Bulk status result = 0
kernel: usb-storage: Bulk status Sig 0x53425355 T 0x1 R 0 Stat 0x0
kernel: usb-storage: Fixing INQUIRY data to show SCSI rev 2
kernel: usb-storage: scsi cmd done, result=0x0
kernel: usb-storage: *** thread sleeping.
kernel: Vendor: Model: Rev:
kernel: Type: Direct-Access ANSI SCSI revision: 02
kernel: usb-storage: queuecommand() called
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: Bad LUN (0/1)
kernel: usb-storage: *** thread sleeping.
kernel: usb-storage: queuecommand() called
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: Bad target number (1/0)
kernel: usb-storage: *** thread sleeping.
kernel: usb-storage: queuecommand() called
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: Bad target number (2/0)
kernel: usb-storage: *** thread sleeping.
kernel: usb-storage: queuecommand() called
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: Bad target number (3/0)
kernel: usb-storage: *** thread sleeping.
kernel: usb-storage: queuecommand() called
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: Bad target number (4/0)
kernel: usb-storage: *** thread sleeping.
kernel: usb-storage: queuecommand() called
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: Bad target number (5/0)
kernel: usb-storage: *** thread sleeping.
kernel: usb-storage: queuecommand() called
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: Bad target number (6/0)
kernel: usb-storage: *** thread sleeping.
kernel: usb-storage: queuecommand() called
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: Bad target number (7/0)
kernel: usb-storage: *** thread sleeping.
kernel: WARNING: USB Mass Storage data integrity not assured
kernel: USB Mass Storage device found at 3
kernel: usb.c: usb-storage driver claimed interface cc54cf00
kernel: usb.c: kusbd: /sbin/hotplug add 3
kernel: usb.c: kusbd policy returned 0xfffffffe
usbmgr[726]: vendor:0x7c4 product:0x103
usbmgr[726]: class:0x8 subclass:0x6 protocol:0x50
usbmgr[726]: USB device is matched the configuration
kernel: Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
kernel: usb-storage: queuecommand() called
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
kernel: usb-storage: 00 00 00 00 00 00 00 00 00 00 00 00
kernel: usb-storage: Bulk command S 0x43425355 T 0xa Trg 0 LUN 0 L 0 F 0 CL 6
kernel: usb-storage: Bulk command transfer result=0
kernel: usb-storage: Attempting to get CSW...
kernel: usb-storage: Bulk status result = 0
kernel: usb-storage: Bulk status Sig 0x53425355 T 0xa R 0 Stat 0x0
kernel: usb-storage: scsi cmd done, result=0x0
kernel: usb-storage: *** thread sleeping.
kernel: usb-storage: queuecommand() called
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: Command READ_CAPACITY (10 bytes)
kernel: usb-storage: 25 00 00 00 00 00 00 00 00 00 00 00
kernel: usb-storage: Bulk command S 0x43425355 T 0xb Trg 0 LUN 0 L 8 F 128 CL 10
kernel: usb-storage: Bulk command transfer result=0
kernel: usb-storage: usb_stor_transfer_partial(): xfer 8 bytes
kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 8/8
kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
kernel: usb-storage: Bulk data transfer result 0x0
kernel: usb-storage: Attempting to get CSW...
kernel: usb-storage: Bulk status result = 0
kernel: usb-storage: Bulk status Sig 0x53425355 T 0xb R 0 Stat 0x0
kernel: usb-storage: scsi cmd done, result=0x0
kernel: usb-storage: *** thread sleeping.
kernel: SCSI device sda: 23579137 512-byte hdwr sectors (12073 MB)
kernel: usb-storage: queuecommand() called
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: Command MODE_SENSE (6 bytes)
kernel: usb-storage: 1a 00 3f 00 ff 00 00 00 00 00 00 00
kernel: usb-storage: Bulk command S 0x43425355 T 0xc Trg 0 LUN 0 L 255 F 128 CL 6
kernel: usb-storage: Bulk command transfer result=0
kernel: usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 12/255
kernel: usb-storage: Bulk data transfer result 0x1
kernel: usb-storage: Attempting to get CSW...
kernel: usb-storage: clearing endpoint halt for pipe 0xc0010380
kernel: usb-storage: Attempting to get CSW (2nd try)...
kernel: usb-storage: Bulk status result = 0
kernel: usb-storage: Bulk status Sig 0x53425355 T 0xc R 243 Stat 0x0
kernel: usb-storage: scsi cmd done, result=0x0
kernel: usb-storage: *** thread sleeping.
kernel: sda: Write Protect is off
kernel: sda:<7>usb-storage: queuecommand() called
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: Command READ_10 (10 bytes)
kernel: usb-storage: 28 00 00 00 00 00 00 00 08 00 00 00
kernel: usb-storage: Bulk command S 0x43425355 T 0xd Trg 0 LUN 0 L 4096 F 128 CL 10
kernel: usb-storage: Bulk command transfer result=0
kernel: usb-storage: usb_stor_transfer_partial(): xfer 4096 bytes
kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 4096/4096
kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
kernel: usb-storage: Bulk data transfer result 0x0
kernel: usb-storage: Attempting to get CSW...
kernel: usb-storage: Bulk status result = 0
kernel: usb-storage: Bulk status Sig 0x53425355 T 0xd R 0 Stat 0x0
kernel: usb-storage: scsi cmd done, result=0x0
kernel: usb-storage: *** thread sleeping.
kernel: sda1 <<7>usb-storage: queuecommand() called
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: Command READ_10 (10 bytes)
kernel: usb-storage: 28 00 00 00 00 38 00 00 08 00 00 00
kernel: usb-storage: Bulk command S 0x43425355 T 0xe Trg 0 LUN 0 L 4096 F 128 CL 10
kernel: usb-storage: Bulk command transfer result=0
kernel: usb-storage: usb_stor_transfer_partial(): xfer 4096 bytes
kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 4096/4096
kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
kernel: usb-storage: Bulk data transfer result 0x0
kernel: usb-storage: Attempting to get CSW...
kernel: usb-storage: Bulk status result = 0
kernel: usb-storage: Bulk status Sig 0x53425355 T 0xe R 0 Stat 0x0
kernel: usb-storage: scsi cmd done, result=0x0
kernel: usb-storage: *** thread sleeping.
kernel: sda5 >
usbmgr[726]: "scsi_mod" was loaded
usbmgr[726]: "sd_mod" was loaded
usbmgr[726]: "usb-storage" was loaded
kernel: usb-storage: queuecommand() called
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: Command START_STOP (6 bytes)
kernel: usb-storage: 1b 00 00 00 01 00 00 00 60 65 ff bf
kernel: usb-storage: Bulk command S 0x43425355 T 0xf Trg 0 LUN 0 L 0 F 0 CL 6
kernel: usb-storage: Bulk command transfer result=0
kernel: usb-storage: Attempting to get CSW...
kernel: usb-storage: Bulk status result = 0
kernel: usb-storage: Bulk status Sig 0x53425355 T 0xf R 0 Stat 0x0
kernel: usb-storage: scsi cmd done, result=0x0
kernel: usb-storage: *** thread sleeping.
kernel: usb-storage: queuecommand() called
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
kernel: usb-storage: 1e 00 00 00 01 00 ff ff d8 fe 12 c0
kernel: usb-storage: Bulk command S 0x43425355 T 0x10 Trg 0 LUN 0 L 0 F 0 CL 6
kernel: usb-storage: Bulk command transfer result=0
kernel: usb-storage: Attempting to get CSW...
kernel: usb-storage: Bulk status result = 0
kernel: usb-storage: Bulk status Sig 0x53425355 T 0x10 R 0 Stat 0x1
kernel: usb-storage: -- transport indicates command failure
kernel: usb-storage: Issuing auto-REQUEST_SENSE
kernel: usb-storage: Bulk command S 0x43425355 T 0x10 Trg 0 LUN 0 L 18 F 128 CL 6
kernel: usb-storage: Bulk command transfer result=0
kernel: usb-storage: usb_stor_transfer_partial(): xfer 18 bytes
kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 18/18
kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
kernel: usb-storage: Bulk data transfer result 0x0
kernel: usb-storage: Attempting to get CSW...
kernel: usb-storage: Bulk status result = 0
kernel: usb-storage: Bulk status Sig 0x53425355 T 0x10 R 0 Stat 0x0
kernel: usb-storage: -- Result from auto-sense is 0
kernel: usb-storage: -- code: 0x0, key: 0x0, ASC: 0x0, ASCQ: 0x0
kernel: usb-storage: No Sense: no additional sense information
kernel: usb-storage: scsi cmd done, result=0x2
kernel: usb-storage: *** thread sleeping.
kernel: usb-storage: queuecommand() called
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: Command REQUEST_SENSE (6 bytes)
kernel: usb-storage: 03 00 00 00 ff 00 ff ff d8 fe 12 c0
kernel: usb-storage: Bulk command S 0x43425355 T 0x0 Trg 0 LUN 0 L 255 F 128 CL 6
kernel: usb-storage: Bulk command transfer result=0
kernel: usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 255/255
kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
kernel: usb-storage: Bulk data transfer result 0x0
kernel: usb-storage: Attempting to get CSW...
kernel: usb-storage: Bulk status result = 0
kernel: usb-storage: Bulk status Sig 0x53425355 T 0x0 R 0 Stat 0x0
kernel: usb-storage: scsi cmd done, result=0x0
kernel: usb-storage: *** thread sleeping.
kernel: usb-storage: device_reset() called
kernel: usb-storage: Bulk reset requested
kernel: usb-storage: Bulk soft reset completed
kernel: usb-storage: queuecommand() called
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
kernel: usb-storage: 00 00 00 00 00 00 ff ff d8 fe 12 c0
kernel: usb-storage: Bulk command S 0x43425355 T 0x0 Trg 0 LUN 0 L 0 F 0 CL 6
kernel: usb-storage: Bulk command transfer result=0
kernel: usb-storage: Attempting to get CSW...
kernel: usb-storage: Bulk status result = 0
kernel: usb-storage: Bulk status Sig 0x53425355 T 0x0 R 0 Stat 0x0
kernel: usb-storage: scsi cmd done, result=0x0
kernel: usb-storage: *** thread sleeping.
kernel: usb-storage: queuecommand() called
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
kernel: usb-storage: 1e 00 00 00 01 00 ff ff d8 fe 12 c0
kernel: usb-storage: Bulk command S 0x43425355 T 0x0 Trg 0 LUN 0 L 0 F 0 CL 6
kernel: usb-storage: Bulk command transfer result=0
kernel: usb-storage: Attempting to get CSW...
kernel: usb-storage: Bulk status result = 0
kernel: usb-storage: Bulk status Sig 0x53425355 T 0x0 R 0 Stat 0x1
kernel: usb-storage: -- transport indicates command failure
kernel: usb-storage: Issuing auto-REQUEST_SENSE
kernel: usb-storage: Bulk command S 0x43425355 T 0x0 Trg 0 LUN 0 L 18 F 128 CL 6
kernel: usb-storage: Bulk command transfer result=0
kernel: usb-storage: usb_stor_transfer_partial(): xfer 18 bytes
kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 18/18
kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
kernel: usb-storage: Bulk data transfer result 0x0
kernel: usb-storage: Attempting to get CSW...
kernel: usb-storage: Bulk status result = 0
kernel: usb-storage: Bulk status Sig 0x53425355 T 0x0 R 0 Stat 0x0
kernel: usb-storage: -- Result from auto-sense is 0
kernel: usb-storage: -- code: 0x0, key: 0x0, ASC: 0x0, ASCQ: 0x0
kernel: usb-storage: No Sense: no additional sense information
kernel: usb-storage: scsi cmd done, result=0x2
kernel: usb-storage: *** thread sleeping.
kernel: usb-storage: bus_reset() called
kernel: uhci.c: root-hub INT complete: port1: 288 port2: 95 data: 2
kernel: hub.c: port 1 enable change, status 110
kernel: hub.c: port 1, portstatus 103, change 0, 12 Mb/s
kernel: usb-storage: Examinging driver usb-storage...skipping ourselves.
kernel: usb-storage: bus_reset() complete
kernel: usb-storage: queuecommand() called
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
kernel: usb-storage: 00 00 00 00 00 00 ff ff d8 fe 12 c0
kernel: usb-storage: Bulk command S 0x43425355 T 0x0 Trg 0 LUN 0 L 0 F 0 CL 6
kernel: usb-storage: Bulk command transfer result=0
kernel: usb-storage: Attempting to get CSW...
kernel: usb-storage: Bulk status result = 0
kernel: usb-storage: Bulk status Sig 0x53425355 T 0x0 R 0 Stat 0x0
kernel: usb-storage: scsi cmd done, result=0x0
kernel: usb-storage: *** thread sleeping.
kernel: usb-storage: queuecommand() called
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
kernel: usb-storage: 1e 00 00 00 01 00 ff ff d8 fe 12 c0
kernel: usb-storage: Bulk command S 0x43425355 T 0x0 Trg 0 LUN 0 L 0 F 0 CL 6
kernel: usb-storage: Bulk command transfer result=0
kernel: usb-storage: Attempting to get CSW...
kernel: usb-storage: Bulk status result = 0
kernel: usb-storage: Bulk status Sig 0x53425355 T 0x0 R 0 Stat 0x1
kernel: usb-storage: -- transport indicates command failure
kernel: usb-storage: Issuing auto-REQUEST_SENSE
kernel: usb-storage: Bulk command S 0x43425355 T 0x0 Trg 0 LUN 0 L 18 F 128 CL 6
kernel: usb-storage: Bulk command transfer result=0
kernel: usb-storage: usb_stor_transfer_partial(): xfer 18 bytes
kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 18/18
kernel: usb-storage: usb_stor_transfer_partial(): transfer complete
kernel: usb-storage: Bulk data transfer result 0x0
kernel: usb-storage: Attempting to get CSW...
kernel: usb-storage: Bulk status result = 0
kernel: usb-storage: Bulk status Sig 0x53425355 T 0x0 R 0 Stat 0x0
kernel: usb-storage: -- Result from auto-sense is 0
kernel: usb-storage: -- code: 0x0, key: 0x0, ASC: 0x0, ASCQ: 0x0
kernel: usb-storage: No Sense: no additional sense information
kernel: usb-storage: scsi cmd done, result=0x2
kernel: usb-storage: *** thread sleeping.
kernel: scsi: device set offline - not ready or command retry failed after bus reset: host 0 channel 0 id 0 lun 0
kernel: I/O error: dev 08:05, sector 0
kernel: uhci.c: root-hub INT complete: port1: 8a port2: 95 data: 2
kernel: hub.c: port 1 connection change
kernel: hub.c: port 1, portstatus 100, change 3, 12 Mb/s
kernel: usb.c: USB disconnect on device 3
kernel: usb-storage: storage_disconnect() called
kernel: usb-storage: -- releasing main URB
kernel: usb-storage: -- usb_unlink_urb() returned -19
kernel: usb.c: kusbd: /sbin/hotplug remove 3
kernel: usb.c: kusbd policy returned 0xfffffffe
kernel: uhci.c: root-hub INT complete: port1: 88 port2: 95 data: 2
kernel: hub.c: port 1 enable change, status 100
kernel: usb-storage: usb_stor_exit() called
kernel: usb-storage: -- calling usb_deregister()
kernel: usb.c: deregistering driver usb-storage
kernel: usb-storage: -- calling scsi_unregister_module()
kernel: usb-storage: release() called for host usb-storage
kernel: usb-storage: -- sending US_ACT_EXIT command to thread
kernel: usb-storage: *** thread awakened.
kernel: usb-storage: -- US_ACT_EXIT command received
kernel: scsi : 0 hosts left.
usbmgr[726]: "scsi_mod" was unloaded
usbmgr[726]: "sd_mod" was unloaded
usbmgr[726]: "usb-storage" was unloaded
init: Switching to runlevel: 6
usbmgr[1787]: umount /proc/bus/usb
usbmgr[726]: bye!
On Wed, Nov 14, 2001 at 12:41:23AM +0100, Christoph Kampe wrote:
... very much, but not the Problemdescription.
Hi again,
sorry i forget to write what went wrong with the DataFab Storage.
Actually, with 2.4.8 when i connect the usb-storage it loads all
necessary modules and a mount takes less then 1second.
With 2.4.15-pre4 it loads the three modules too but, it gives
> kernel: usb-storage: *** thread sleeping.
> kernel: scsi: device set offline - not ready or command retry failed after
> bus reset: host 0 channel 0 id 0 lun 0
> kernel: I/O error: dev 08:05, sector 0
in my log.
as i wrote in my last mail (last 10 lines)
a mount won?t work, takes some time and breaks with
"I/O error:dev 08:05, sector 0"
I dont?t know exactly if it fails because of the usb-storage or the
scsi_mod module.
Regards
Christoph
Hmm... I've been experiencing the very same thing, but with a Digicam that
reports to the PC as a usb-storage device. Mount just hangs.... I haven't
had the patience to wait for it to time out (especially if i need my pics
fast)...
Rebooting/halting usually causes an oops with me (while mount is still
hanging, that is)
DK
At 01:04 14/11/2001 +0100, you wrote:
>On Wed, Nov 14, 2001 at 12:41:23AM +0100, Christoph Kampe wrote:
>... very much, but not the Problemdescription.
>
>Hi again,
>sorry i forget to write what went wrong with the DataFab Storage.
>
>Actually, with 2.4.8 when i connect the usb-storage it loads all
>necessary modules and a mount takes less then 1second.
>
>With 2.4.15-pre4 it loads the three modules too but, it gives
> > kernel: usb-storage: *** thread sleeping.
> > kernel: scsi: device set offline - not ready or command retry failed after
> > bus reset: host 0 channel 0 id 0 lun 0
> > kernel: I/O error: dev 08:05, sector 0
>in my log.
>as i wrote in my last mail (last 10 lines)
>a mount won?t work, takes some time and breaks with
>"I/O error:dev 08:05, sector 0"
>
>I dont?t know exactly if it fails because of the usb-storage or the
>scsi_mod module.
>
>Regards
>Christoph
>
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to [email protected]
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at http://www.tux.org/lkml/