2024-06-10 14:04:43

by Martin Schiller

[permalink] [raw]
Subject: [PATCH net-next v3 03/12] net: dsa: lantiq_gswip: add terminating \n where missing

Some dev_err are missing the terminating \n. Let's add that.

Suggested-by: Vladimir Oltean <[email protected]>
Signed-off-by: Martin Schiller <[email protected]>
---
drivers/net/dsa/lantiq_gswip.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index b9c7076ce32f..fe64baf0d7f1 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -836,7 +836,7 @@ static int gswip_setup(struct dsa_switch *ds)

err = gswip_pce_load_microcode(priv);
if (err) {
- dev_err(priv->dev, "writing PCE microcode failed, %i", err);
+ dev_err(priv->dev, "writing PCE microcode failed, %i\n", err);
return err;
}

@@ -1792,7 +1792,7 @@ static u32 gswip_bcm_ram_entry_read(struct gswip_priv *priv, u32 table,
err = gswip_switch_r_timeout(priv, GSWIP_BM_RAM_CTRL,
GSWIP_BM_RAM_CTRL_BAS);
if (err) {
- dev_err(priv->dev, "timeout while reading table: %u, index: %u",
+ dev_err(priv->dev, "timeout while reading table: %u, index: %u\n",
table, index);
return 0;
}
@@ -2021,7 +2021,7 @@ static void gswip_gphy_fw_remove(struct gswip_priv *priv,

ret = regmap_write(priv->rcu_regmap, gphy_fw->fw_addr_offset, 0);
if (ret)
- dev_err(priv->dev, "can not reset GPHY FW pointer");
+ dev_err(priv->dev, "can not reset GPHY FW pointer\n");

clk_disable_unprepare(gphy_fw->clk_gate);

@@ -2050,7 +2050,7 @@ static int gswip_gphy_fw_list(struct gswip_priv *priv,
priv->gphy_fw_name_cfg = &xrx200a2x_gphy_data;
break;
default:
- dev_err(dev, "unknown GSWIP version: 0x%x", version);
+ dev_err(dev, "unknown GSWIP version: 0x%x\n", version);
return -ENOENT;
}
}
@@ -2060,7 +2060,7 @@ static int gswip_gphy_fw_list(struct gswip_priv *priv,
priv->gphy_fw_name_cfg = match->data;

if (!priv->gphy_fw_name_cfg) {
- dev_err(dev, "GPHY compatible type not supported");
+ dev_err(dev, "GPHY compatible type not supported\n");
return -ENOENT;
}

@@ -2163,7 +2163,7 @@ static int gswip_probe(struct platform_device *pdev)
return -EINVAL;
break;
default:
- dev_err(dev, "unknown GSWIP version: 0x%x", version);
+ dev_err(dev, "unknown GSWIP version: 0x%x\n", version);
return -ENOENT;
}

@@ -2191,7 +2191,7 @@ static int gswip_probe(struct platform_device *pdev)
goto gphy_fw_remove;
}
if (!dsa_is_cpu_port(priv->ds, priv->hw_info->cpu_port)) {
- dev_err(dev, "wrong CPU port defined, HW only supports port: %i",
+ dev_err(dev, "wrong CPU port defined, HW only supports port: %i\n",
priv->hw_info->cpu_port);
err = -EINVAL;
goto disable_switch;
--
2.39.2



2024-06-10 21:47:16

by Andrew Lunn

[permalink] [raw]
Subject: Re: [PATCH net-next v3 03/12] net: dsa: lantiq_gswip: add terminating \n where missing

On Mon, Jun 10, 2024 at 04:02:10PM +0200, Martin Schiller wrote:
> Some dev_err are missing the terminating \n. Let's add that.
>
> Suggested-by: Vladimir Oltean <[email protected]>
> Signed-off-by: Martin Schiller <[email protected]>

Reviewed-by: Andrew Lunn <[email protected]>

Andrew