Hi!
Supervisor Mode Access Prevention (X86_SMAP) [Y/n/?] (NEW)
...Slows stuff down, eats memory, only works on unreleased Intel CPUs
(from 2013!) perhaps should be off by default?
"Supervisor Mode Access Prevention (SMAP) is a security
feature in newer Intel processors. There is a small
performance cost if this enabled and turned on; there is
also a small increase in the kernel size if this is enabled."
Perhaps help text should mention what processors support it?
DiBcom DiB0070 silicon base-band tuner (DVB_TUNER_DIB0070) [M/n/y/?]
(NEW) n
DiBcom DiB0090 silicon base-band tuner (DVB_TUNER_DIB0090) [M/n/y/?]
(NEW) n
M is never good config default.
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Em Thu, 15 Nov 2012 12:06:20 +0100
Pavel Machek <[email protected]> escreveu:
> DiBcom DiB0070 silicon base-band tuner (DVB_TUNER_DIB0070) [M/n/y/?]
> (NEW) n
> DiBcom DiB0090 silicon base-band tuner (DVB_TUNER_DIB0090) [M/n/y/?]
> (NEW) n
>
> M is never good config default.
Had you ever seen the Kconfig logic for tuners? They're not enabled by default.
config MEDIA_SUBDRV_AUTOSELECT
bool "Autoselect tuners and i2c modules to build"
depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_CAMERA_SUPPORT
default y
help
By default, a media driver auto-selects all possible i2c
devices that are used by any of the supported devices.
This is generally the right thing to do, except when there
are strict constraints with regards to the kernel size,
like on embedded systems.
Use this option with care, as deselecting ancillary drivers which
are, in fact, necessary will result in the lack of the needed
functionality for your device (it may not tune or may not have
the need demodulers).
If unsure say Y.
...
menu "Customise DVB Frontends"
visible if !MEDIA_SUBDRV_AUTOSELECT
comment "Multistandard (satellite) frontends"
depends on DVB_CORE
...
config DVB_TUNER_DIB0070
tristate "DiBcom DiB0070 silicon base-band tuner"
depends on I2C
default m if !MEDIA_SUBDRV_AUTOSELECT
help
A driver for the silicon baseband tuner DiB0070 from DiBcom.
This device is only used inside a SiP called together with a
demodulator for now.
People should never disable MEDIA_SUBDRV_AUTOSELECT, except if they know
exactly what they're doing and they have very strict diskspace constraints,
as the DVB driver may stop working without support for the needed
ancillary chips present at the DVB card.
The default "M" is there to prevent people to open NOT_A_BUG bugzillas
when they do stupid things like disabling MEDIA_SUBDRV_AUTOSELECT without
knowing that this can break the driver for their cards.
--
Regards,
Mauro
On 11/15/2012 03:06 AM, Pavel Machek wrote:
> Hi!
>
> Supervisor Mode Access Prevention (X86_SMAP) [Y/n/?] (NEW)
>
> ...Slows stuff down, eats memory, only works on unreleased Intel CPUs
> (from 2013!) perhaps should be off by default?
>
> "Supervisor Mode Access Prevention (SMAP) is a security
> feature in newer Intel processors. There is a small
> performance cost if this enabled and turned on; there is
> also a small increase in the kernel size if this is enabled."
>
*Extremely* small. Unless you are targeting a specific processor there
is no point in disabling it. If anyone can find a non-SMAP processor on
which the overhead is measurable I would be highly surprised, except
perhaps some embedded 486 clone.
-hpa