From: "Lad, Prabhakar" <[email protected]>
This patch adds video sync properties as part of endpoint
properties and also support to parse them in the parser.
Signed-off-by: Lad, Prabhakar <[email protected]>
Cc: Hans Verkuil <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Cc: Guennadi Liakhovetski <[email protected]>
Cc: Sylwester Nawrocki <[email protected]>
Cc: Sakari Ailus <[email protected]>
Cc: Grant Likely <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Rob Landley <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Kyungmin Park <[email protected]>
---
This patch has 10 warnings for line over 80 characters
for which I think can be ignored.
RFC v2 https://patchwork.kernel.org/patch/2578091/
RFC V1 https://patchwork.kernel.org/patch/2572341/
Changes for v3:
1: Fixed review comments pointed by Laurent and Sylwester.
.../devicetree/bindings/media/video-interfaces.txt | 1 +
drivers/media/v4l2-core/v4l2-of.c | 20 ++++++++++++++++++
include/dt-bindings/media/video-interfaces.h | 17 +++++++++++++++
include/media/v4l2-mediabus.h | 22 +++++++++++---------
4 files changed, 50 insertions(+), 10 deletions(-)
create mode 100644 include/dt-bindings/media/video-interfaces.h
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt
index e022d2d..2081278 100644
--- a/Documentation/devicetree/bindings/media/video-interfaces.txt
+++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
@@ -101,6 +101,7 @@ Optional endpoint properties
array contains only one entry.
- clock-noncontinuous: a boolean property to allow MIPI CSI-2 non-continuous
clock mode.
+- video-sync: property indicating to sync the video on a signal in RGB.
Example
diff --git a/drivers/media/v4l2-core/v4l2-of.c b/drivers/media/v4l2-core/v4l2-of.c
index aa59639..1a54530 100644
--- a/drivers/media/v4l2-core/v4l2-of.c
+++ b/drivers/media/v4l2-core/v4l2-of.c
@@ -100,6 +100,26 @@ static void v4l2_of_parse_parallel_bus(const struct device_node *node,
if (!of_property_read_u32(node, "data-shift", &v))
bus->data_shift = v;
+ if (!of_property_read_u32(node, "video-sync", &v)) {
+ switch (v) {
+ case V4L2_MBUS_VIDEO_SEPARATE_SYNC:
+ flags |= V4L2_MBUS_VIDEO_SEPARATE_SYNC;
+ break;
+ case V4L2_MBUS_VIDEO_COMPOSITE_SYNC:
+ flags |= V4L2_MBUS_VIDEO_COMPOSITE_SYNC;
+ break;
+ case V4L2_MBUS_VIDEO_SYNC_ON_COMPOSITE:
+ flags |= V4L2_MBUS_VIDEO_SYNC_ON_COMPOSITE;
+ break;
+ case V4L2_MBUS_VIDEO_SYNC_ON_GREEN:
+ flags |= V4L2_MBUS_VIDEO_SYNC_ON_GREEN;
+ break;
+ case V4L2_MBUS_VIDEO_SYNC_ON_LUMINANCE:
+ flags |= V4L2_MBUS_VIDEO_SYNC_ON_LUMINANCE;
+ break;
+ }
+ }
+
bus->flags = flags;
}
diff --git a/include/dt-bindings/media/video-interfaces.h b/include/dt-bindings/media/video-interfaces.h
new file mode 100644
index 0000000..1a083dd
--- /dev/null
+++ b/include/dt-bindings/media/video-interfaces.h
@@ -0,0 +1,17 @@
+/*
+ * This header provides constants for video interface.
+ *
+ */
+
+#ifndef _DT_BINDINGS_VIDEO_INTERFACES_H
+#define _DT_BINDINGS_VIDEO_INTERFACES_H
+
+#define V4L2_MBUS_VIDEO_SEPARATE_SYNC (1 << 2)
+#define V4L2_MBUS_VIDEO_COMPOSITE_SYNC (1 << 3)
+#define V4L2_MBUS_VIDEO_SYNC_ON_COMPOSITE (1 << 4)
+#define V4L2_MBUS_VIDEO_SYNC_ON_GREEN (1 << 5)
+#define V4L2_MBUS_VIDEO_SYNC_ON_LUMINANCE (1 << 6)
+
+#define V4L2_MBUS_VIDEO_INTERFACES_END 6
+
+#endif
diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
index 83ae07e..a4676dd 100644
--- a/include/media/v4l2-mediabus.h
+++ b/include/media/v4l2-mediabus.h
@@ -11,6 +11,8 @@
#ifndef V4L2_MEDIABUS_H
#define V4L2_MEDIABUS_H
+#include <dt-bindings/media/video-interfaces.h>
+
#include <linux/v4l2-mediabus.h>
/* Parallel flags */
@@ -28,18 +30,18 @@
* V4L2_MBUS_[HV]SYNC* flags should be also used for specifying
* configuration of hardware that uses [HV]REF signals
*/
-#define V4L2_MBUS_HSYNC_ACTIVE_HIGH (1 << 2)
-#define V4L2_MBUS_HSYNC_ACTIVE_LOW (1 << 3)
-#define V4L2_MBUS_VSYNC_ACTIVE_HIGH (1 << 4)
-#define V4L2_MBUS_VSYNC_ACTIVE_LOW (1 << 5)
-#define V4L2_MBUS_PCLK_SAMPLE_RISING (1 << 6)
-#define V4L2_MBUS_PCLK_SAMPLE_FALLING (1 << 7)
-#define V4L2_MBUS_DATA_ACTIVE_HIGH (1 << 8)
-#define V4L2_MBUS_DATA_ACTIVE_LOW (1 << 9)
+#define V4L2_MBUS_HSYNC_ACTIVE_HIGH (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 1))
+#define V4L2_MBUS_HSYNC_ACTIVE_LOW (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 2))
+#define V4L2_MBUS_VSYNC_ACTIVE_HIGH (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 3))
+#define V4L2_MBUS_VSYNC_ACTIVE_LOW (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 4))
+#define V4L2_MBUS_PCLK_SAMPLE_RISING (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 5))
+#define V4L2_MBUS_PCLK_SAMPLE_FALLING (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 6))
+#define V4L2_MBUS_DATA_ACTIVE_HIGH (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 7))
+#define V4L2_MBUS_DATA_ACTIVE_LOW (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 8))
/* FIELD = 0/1 - Field1 (odd)/Field2 (even) */
-#define V4L2_MBUS_FIELD_EVEN_HIGH (1 << 10)
+#define V4L2_MBUS_FIELD_EVEN_HIGH (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 9))
/* FIELD = 1/0 - Field1 (odd)/Field2 (even) */
-#define V4L2_MBUS_FIELD_EVEN_LOW (1 << 11)
+#define V4L2_MBUS_FIELD_EVEN_LOW (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 10))
/* Serial flags */
/* How many lanes the client can use */
--
1.7.9.5
Hi Prabhakar,
On Sat June 22 2013 17:03:03 Prabhakar Lad wrote:
> From: "Lad, Prabhakar" <[email protected]>
>
> This patch adds video sync properties as part of endpoint
> properties and also support to parse them in the parser.
>
> Signed-off-by: Lad, Prabhakar <[email protected]>
> Cc: Hans Verkuil <[email protected]>
FYI: using my private email when CC-ing me generally works better.
I often skip v4l2-related emails to my work address since I assume those
have either been CC-ed to my private email and/or linux-media.
I wondered why I never saw RFC v1/2, now I know :-)
> Cc: Laurent Pinchart <[email protected]>
> Cc: Mauro Carvalho Chehab <[email protected]>
> Cc: Guennadi Liakhovetski <[email protected]>
> Cc: Sylwester Nawrocki <[email protected]>
> Cc: Sakari Ailus <[email protected]>
> Cc: Grant Likely <[email protected]>
> Cc: Rob Herring <[email protected]>
> Cc: Rob Landley <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: Kyungmin Park <[email protected]>
> ---
> This patch has 10 warnings for line over 80 characters
> for which I think can be ignored.
>
> RFC v2 https://patchwork.kernel.org/patch/2578091/
> RFC V1 https://patchwork.kernel.org/patch/2572341/
> Changes for v3:
> 1: Fixed review comments pointed by Laurent and Sylwester.
>
> .../devicetree/bindings/media/video-interfaces.txt | 1 +
> drivers/media/v4l2-core/v4l2-of.c | 20 ++++++++++++++++++
> include/dt-bindings/media/video-interfaces.h | 17 +++++++++++++++
> include/media/v4l2-mediabus.h | 22 +++++++++++---------
> 4 files changed, 50 insertions(+), 10 deletions(-)
> create mode 100644 include/dt-bindings/media/video-interfaces.h
>
> diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt
> index e022d2d..2081278 100644
> --- a/Documentation/devicetree/bindings/media/video-interfaces.txt
> +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
> @@ -101,6 +101,7 @@ Optional endpoint properties
> array contains only one entry.
> - clock-noncontinuous: a boolean property to allow MIPI CSI-2 non-continuous
> clock mode.
> +- video-sync: property indicating to sync the video on a signal in RGB.
Please document what the various syncs actually mean.
>
>
> Example
> diff --git a/drivers/media/v4l2-core/v4l2-of.c b/drivers/media/v4l2-core/v4l2-of.c
> index aa59639..1a54530 100644
> --- a/drivers/media/v4l2-core/v4l2-of.c
> +++ b/drivers/media/v4l2-core/v4l2-of.c
> @@ -100,6 +100,26 @@ static void v4l2_of_parse_parallel_bus(const struct device_node *node,
> if (!of_property_read_u32(node, "data-shift", &v))
> bus->data_shift = v;
>
> + if (!of_property_read_u32(node, "video-sync", &v)) {
> + switch (v) {
> + case V4L2_MBUS_VIDEO_SEPARATE_SYNC:
> + flags |= V4L2_MBUS_VIDEO_SEPARATE_SYNC;
> + break;
> + case V4L2_MBUS_VIDEO_COMPOSITE_SYNC:
> + flags |= V4L2_MBUS_VIDEO_COMPOSITE_SYNC;
> + break;
> + case V4L2_MBUS_VIDEO_SYNC_ON_COMPOSITE:
> + flags |= V4L2_MBUS_VIDEO_SYNC_ON_COMPOSITE;
> + break;
> + case V4L2_MBUS_VIDEO_SYNC_ON_GREEN:
> + flags |= V4L2_MBUS_VIDEO_SYNC_ON_GREEN;
> + break;
> + case V4L2_MBUS_VIDEO_SYNC_ON_LUMINANCE:
> + flags |= V4L2_MBUS_VIDEO_SYNC_ON_LUMINANCE;
> + break;
> + }
> + }
> +
> bus->flags = flags;
>
> }
> diff --git a/include/dt-bindings/media/video-interfaces.h b/include/dt-bindings/media/video-interfaces.h
> new file mode 100644
> index 0000000..1a083dd
> --- /dev/null
> +++ b/include/dt-bindings/media/video-interfaces.h
> @@ -0,0 +1,17 @@
> +/*
> + * This header provides constants for video interface.
> + *
> + */
> +
> +#ifndef _DT_BINDINGS_VIDEO_INTERFACES_H
> +#define _DT_BINDINGS_VIDEO_INTERFACES_H
> +
> +#define V4L2_MBUS_VIDEO_SEPARATE_SYNC (1 << 2)
> +#define V4L2_MBUS_VIDEO_COMPOSITE_SYNC (1 << 3)
> +#define V4L2_MBUS_VIDEO_SYNC_ON_COMPOSITE (1 << 4)
What on earth is the difference between "COMPOSITE_SYNC" and "SYNC_ON_COMPOSITE"?!
> +#define V4L2_MBUS_VIDEO_SYNC_ON_GREEN (1 << 5)
> +#define V4L2_MBUS_VIDEO_SYNC_ON_LUMINANCE (1 << 6)
> +
> +#define V4L2_MBUS_VIDEO_INTERFACES_END 6
> +
> +#endif
Why would this be here? It isn't Device Tree specific, the same defines can
be used without DT as well.
> diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
> index 83ae07e..a4676dd 100644
> --- a/include/media/v4l2-mediabus.h
> +++ b/include/media/v4l2-mediabus.h
> @@ -11,6 +11,8 @@
> #ifndef V4L2_MEDIABUS_H
> #define V4L2_MEDIABUS_H
>
> +#include <dt-bindings/media/video-interfaces.h>
> +
> #include <linux/v4l2-mediabus.h>
>
> /* Parallel flags */
> @@ -28,18 +30,18 @@
> * V4L2_MBUS_[HV]SYNC* flags should be also used for specifying
> * configuration of hardware that uses [HV]REF signals
> */
> -#define V4L2_MBUS_HSYNC_ACTIVE_HIGH (1 << 2)
> -#define V4L2_MBUS_HSYNC_ACTIVE_LOW (1 << 3)
> -#define V4L2_MBUS_VSYNC_ACTIVE_HIGH (1 << 4)
> -#define V4L2_MBUS_VSYNC_ACTIVE_LOW (1 << 5)
> -#define V4L2_MBUS_PCLK_SAMPLE_RISING (1 << 6)
> -#define V4L2_MBUS_PCLK_SAMPLE_FALLING (1 << 7)
> -#define V4L2_MBUS_DATA_ACTIVE_HIGH (1 << 8)
> -#define V4L2_MBUS_DATA_ACTIVE_LOW (1 << 9)
> +#define V4L2_MBUS_HSYNC_ACTIVE_HIGH (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 1))
> +#define V4L2_MBUS_HSYNC_ACTIVE_LOW (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 2))
> +#define V4L2_MBUS_VSYNC_ACTIVE_HIGH (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 3))
> +#define V4L2_MBUS_VSYNC_ACTIVE_LOW (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 4))
> +#define V4L2_MBUS_PCLK_SAMPLE_RISING (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 5))
> +#define V4L2_MBUS_PCLK_SAMPLE_FALLING (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 6))
> +#define V4L2_MBUS_DATA_ACTIVE_HIGH (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 7))
> +#define V4L2_MBUS_DATA_ACTIVE_LOW (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 8))
> /* FIELD = 0/1 - Field1 (odd)/Field2 (even) */
> -#define V4L2_MBUS_FIELD_EVEN_HIGH (1 << 10)
> +#define V4L2_MBUS_FIELD_EVEN_HIGH (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 9))
> /* FIELD = 1/0 - Field1 (odd)/Field2 (even) */
> -#define V4L2_MBUS_FIELD_EVEN_LOW (1 << 11)
> +#define V4L2_MBUS_FIELD_EVEN_LOW (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 10))
And that would also do away with the ugly V4L2_MBUS_VIDEO_INTERFACES_END
define. It's just asking for problems when some of the flags are defined
in one header, and some in another header.
I know it was discussed before, but I am uncomfortable with adding all these
different sync types when the only one used in tvp7002 is SYNC_ON_GREEN.
The only sync types I see in practice are Separate Sync (using separate H and V
sync signals), Embedded Sync (using SAV/EAV codes) and in very rare cases
Sync-on-Green. Sync-on-Luminance is I expect really identical to Sync-on-Green,
only instead of using RGB it uses YUV where Y maps to the Green pin.
Anyway, this needs more work I'm afraid.
Regards,
Hans
>
> /* Serial flags */
> /* How many lanes the client can use */
>
Hi Hans,
Thanks for the review.
On Mon, Jun 24, 2013 at 1:21 PM, Hans Verkuil <[email protected]> wrote:
> Hi Prabhakar,
>
> On Sat June 22 2013 17:03:03 Prabhakar Lad wrote:
>> From: "Lad, Prabhakar" <[email protected]>
>>
>> This patch adds video sync properties as part of endpoint
>> properties and also support to parse them in the parser.
>>
>> Signed-off-by: Lad, Prabhakar <[email protected]>
>> Cc: Hans Verkuil <[email protected]>
>
> FYI: using my private email when CC-ing me generally works better.
> I often skip v4l2-related emails to my work address since I assume those
> have either been CC-ed to my private email and/or linux-media.
>
OK hence forth I'll take care of it.
> I wondered why I never saw RFC v1/2, now I know :-)
[Snip]
>> clock mode.
>> +- video-sync: property indicating to sync the video on a signal in RGB.
>
> Please document what the various syncs actually mean.
>
OK
>>
>>
>> Example
>> diff --git a/drivers/media/v4l2-core/v4l2-of.c b/drivers/media/v4l2-core/v4l2-of.c
>> index aa59639..1a54530 100644
>> --- a/drivers/media/v4l2-core/v4l2-of.c
>> +++ b/drivers/media/v4l2-core/v4l2-of.c
>> @@ -100,6 +100,26 @@ static void v4l2_of_parse_parallel_bus(const struct device_node *node,
>> if (!of_property_read_u32(node, "data-shift", &v))
>> bus->data_shift = v;
>>
>> + if (!of_property_read_u32(node, "video-sync", &v)) {
>> + switch (v) {
>> + case V4L2_MBUS_VIDEO_SEPARATE_SYNC:
>> + flags |= V4L2_MBUS_VIDEO_SEPARATE_SYNC;
>> + break;
>> + case V4L2_MBUS_VIDEO_COMPOSITE_SYNC:
>> + flags |= V4L2_MBUS_VIDEO_COMPOSITE_SYNC;
>> + break;
>> + case V4L2_MBUS_VIDEO_SYNC_ON_COMPOSITE:
>> + flags |= V4L2_MBUS_VIDEO_SYNC_ON_COMPOSITE;
>> + break;
>> + case V4L2_MBUS_VIDEO_SYNC_ON_GREEN:
>> + flags |= V4L2_MBUS_VIDEO_SYNC_ON_GREEN;
>> + break;
>> + case V4L2_MBUS_VIDEO_SYNC_ON_LUMINANCE:
>> + flags |= V4L2_MBUS_VIDEO_SYNC_ON_LUMINANCE;
>> + break;
>> + }
>> + }
>> +
>> bus->flags = flags;
>>
>> }
>> diff --git a/include/dt-bindings/media/video-interfaces.h b/include/dt-bindings/media/video-interfaces.h
>> new file mode 100644
>> index 0000000..1a083dd
>> --- /dev/null
>> +++ b/include/dt-bindings/media/video-interfaces.h
>> @@ -0,0 +1,17 @@
>> +/*
>> + * This header provides constants for video interface.
>> + *
>> + */
>> +
>> +#ifndef _DT_BINDINGS_VIDEO_INTERFACES_H
>> +#define _DT_BINDINGS_VIDEO_INTERFACES_H
>> +
>> +#define V4L2_MBUS_VIDEO_SEPARATE_SYNC (1 << 2)
>> +#define V4L2_MBUS_VIDEO_COMPOSITE_SYNC (1 << 3)
>> +#define V4L2_MBUS_VIDEO_SYNC_ON_COMPOSITE (1 << 4)
>
> What on earth is the difference between "COMPOSITE_SYNC" and "SYNC_ON_COMPOSITE"?!
>
Ahh my bad.
>> +#define V4L2_MBUS_VIDEO_SYNC_ON_GREEN (1 << 5)
>> +#define V4L2_MBUS_VIDEO_SYNC_ON_LUMINANCE (1 << 6)
>> +
>> +#define V4L2_MBUS_VIDEO_INTERFACES_END 6
>> +
>> +#endif
>
> Why would this be here? It isn't Device Tree specific, the same defines can
> be used without DT as well.
>
This is in here because we cannot include header files from other folder in
device tree files.
>> diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
>> index 83ae07e..a4676dd 100644
>> --- a/include/media/v4l2-mediabus.h
>> +++ b/include/media/v4l2-mediabus.h
>> @@ -11,6 +11,8 @@
>> #ifndef V4L2_MEDIABUS_H
>> #define V4L2_MEDIABUS_H
>>
>> +#include <dt-bindings/media/video-interfaces.h>
>> +
>> #include <linux/v4l2-mediabus.h>
>>
>> /* Parallel flags */
>> @@ -28,18 +30,18 @@
>> * V4L2_MBUS_[HV]SYNC* flags should be also used for specifying
>> * configuration of hardware that uses [HV]REF signals
>> */
>> -#define V4L2_MBUS_HSYNC_ACTIVE_HIGH (1 << 2)
>> -#define V4L2_MBUS_HSYNC_ACTIVE_LOW (1 << 3)
>> -#define V4L2_MBUS_VSYNC_ACTIVE_HIGH (1 << 4)
>> -#define V4L2_MBUS_VSYNC_ACTIVE_LOW (1 << 5)
>> -#define V4L2_MBUS_PCLK_SAMPLE_RISING (1 << 6)
>> -#define V4L2_MBUS_PCLK_SAMPLE_FALLING (1 << 7)
>> -#define V4L2_MBUS_DATA_ACTIVE_HIGH (1 << 8)
>> -#define V4L2_MBUS_DATA_ACTIVE_LOW (1 << 9)
>> +#define V4L2_MBUS_HSYNC_ACTIVE_HIGH (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 1))
>> +#define V4L2_MBUS_HSYNC_ACTIVE_LOW (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 2))
>> +#define V4L2_MBUS_VSYNC_ACTIVE_HIGH (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 3))
>> +#define V4L2_MBUS_VSYNC_ACTIVE_LOW (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 4))
>> +#define V4L2_MBUS_PCLK_SAMPLE_RISING (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 5))
>> +#define V4L2_MBUS_PCLK_SAMPLE_FALLING (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 6))
>> +#define V4L2_MBUS_DATA_ACTIVE_HIGH (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 7))
>> +#define V4L2_MBUS_DATA_ACTIVE_LOW (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 8))
>> /* FIELD = 0/1 - Field1 (odd)/Field2 (even) */
>> -#define V4L2_MBUS_FIELD_EVEN_HIGH (1 << 10)
>> +#define V4L2_MBUS_FIELD_EVEN_HIGH (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 9))
>> /* FIELD = 1/0 - Field1 (odd)/Field2 (even) */
>> -#define V4L2_MBUS_FIELD_EVEN_LOW (1 << 11)
>> +#define V4L2_MBUS_FIELD_EVEN_LOW (1 << (V4L2_MBUS_VIDEO_INTERFACES_END + 10))
>
> And that would also do away with the ugly V4L2_MBUS_VIDEO_INTERFACES_END
> define. It's just asking for problems when some of the flags are defined
> in one header, and some in another header.
>
> I know it was discussed before, but I am uncomfortable with adding all these
> different sync types when the only one used in tvp7002 is SYNC_ON_GREEN.
>
> The only sync types I see in practice are Separate Sync (using separate H and V
> sync signals), Embedded Sync (using SAV/EAV codes) and in very rare cases
> Sync-on-Green. Sync-on-Luminance is I expect really identical to Sync-on-Green,
> only instead of using RGB it uses YUV where Y maps to the Green pin.
>
Laurent, Sylwester what do you suggest ?
Regards,
--Prabhakar Lad
Hi Hans,
On Mon, Jun 24, 2013 at 1:21 PM, Hans Verkuil <[email protected]> wrote:
> Hi Prabhakar,
>
> On Sat June 22 2013 17:03:03 Prabhakar Lad wrote:
>> From: "Lad, Prabhakar" <[email protected]>
>>
[snip]
>> +#ifndef _DT_BINDINGS_VIDEO_INTERFACES_H
>> +#define _DT_BINDINGS_VIDEO_INTERFACES_H
>> +
>> +#define V4L2_MBUS_VIDEO_SEPARATE_SYNC (1 << 2)
>> +#define V4L2_MBUS_VIDEO_COMPOSITE_SYNC (1 << 3)
>> +#define V4L2_MBUS_VIDEO_SYNC_ON_COMPOSITE (1 << 4)
>
> What on earth is the difference between "COMPOSITE_SYNC" and "SYNC_ON_COMPOSITE"?!
>
This link http://en.wikipedia.org/wiki/Component_video_sync
would give a better explanation about it.
Regards,
--Prabhakar Lad
Hi,
On 06/22/2013 05:03 PM, Prabhakar Lad wrote:
> From: "Lad, Prabhakar"<[email protected]>
>
> This patch adds video sync properties as part of endpoint
> properties and also support to parse them in the parser.
>
> Signed-off-by: Lad, Prabhakar<[email protected]>
> Cc: Hans Verkuil<[email protected]>
> Cc: Laurent Pinchart<[email protected]>
> Cc: Mauro Carvalho Chehab<[email protected]>
> Cc: Guennadi Liakhovetski<[email protected]>
> Cc: Sylwester Nawrocki<[email protected]>
> Cc: Sakari Ailus<[email protected]>
> Cc: Grant Likely<[email protected]>
> Cc: Rob Herring<[email protected]>
> Cc: Rob Landley<[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: [email protected]
> Cc: Kyungmin Park<[email protected]>
Do you really need such a long Cc list here ? I think it would be better
to just add relevant e-mail addresses when sending the patch, otherwise
when this patch is applied in this form all those addresses are going to
be spammed with the patch management notifications, which might not be
what some ones are really interested in.
> ---
> This patch has 10 warnings for line over 80 characters
> for which I think can be ignored.
>
> RFC v2 https://patchwork.kernel.org/patch/2578091/
> RFC V1 https://patchwork.kernel.org/patch/2572341/
> Changes for v3:
> 1: Fixed review comments pointed by Laurent and Sylwester.
>
> .../devicetree/bindings/media/video-interfaces.txt | 1 +
> drivers/media/v4l2-core/v4l2-of.c | 20 ++++++++++++++++++
> include/dt-bindings/media/video-interfaces.h | 17 +++++++++++++++
> include/media/v4l2-mediabus.h | 22 +++++++++++---------
> 4 files changed, 50 insertions(+), 10 deletions(-)
> create mode 100644 include/dt-bindings/media/video-interfaces.h
>
> diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt
> index e022d2d..2081278 100644
> --- a/Documentation/devicetree/bindings/media/video-interfaces.txt
> +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
> @@ -101,6 +101,7 @@ Optional endpoint properties
> array contains only one entry.
> - clock-noncontinuous: a boolean property to allow MIPI CSI-2 non-continuous
> clock mode.
> +- video-sync: property indicating to sync the video on a signal in RGB.
>
>
> Example
> diff --git a/drivers/media/v4l2-core/v4l2-of.c b/drivers/media/v4l2-core/v4l2-of.c
> index aa59639..1a54530 100644
> --- a/drivers/media/v4l2-core/v4l2-of.c
> +++ b/drivers/media/v4l2-core/v4l2-of.c
> @@ -100,6 +100,26 @@ static void v4l2_of_parse_parallel_bus(const struct device_node *node,
> if (!of_property_read_u32(node, "data-shift",&v))
> bus->data_shift = v;
>
> + if (!of_property_read_u32(node, "video-sync",&v)) {
> + switch (v) {
> + case V4L2_MBUS_VIDEO_SEPARATE_SYNC:
> + flags |= V4L2_MBUS_VIDEO_SEPARATE_SYNC;
I'm not convinced all those video sync types is something that really
belongs
to the flags field. In my understanding this field is supposed to hold only
the _signal polarity_ information.
> + break;
> + case V4L2_MBUS_VIDEO_COMPOSITE_SYNC:
> + flags |= V4L2_MBUS_VIDEO_COMPOSITE_SYNC;
> + break;
> + case V4L2_MBUS_VIDEO_SYNC_ON_COMPOSITE:
> + flags |= V4L2_MBUS_VIDEO_SYNC_ON_COMPOSITE;
> + break;
> + case V4L2_MBUS_VIDEO_SYNC_ON_GREEN:
> + flags |= V4L2_MBUS_VIDEO_SYNC_ON_GREEN;
> + break;
> + case V4L2_MBUS_VIDEO_SYNC_ON_LUMINANCE:
> + flags |= V4L2_MBUS_VIDEO_SYNC_ON_LUMINANCE;
> + break;
> + }
> + }
> +
> bus->flags = flags;
>
> }
> diff --git a/include/dt-bindings/media/video-interfaces.h b/include/dt-bindings/media/video-interfaces.h
> new file mode 100644
> index 0000000..1a083dd
> --- /dev/null
> +++ b/include/dt-bindings/media/video-interfaces.h
> @@ -0,0 +1,17 @@
> +/*
> + * This header provides constants for video interface.
> + *
> + */
> +
> +#ifndef _DT_BINDINGS_VIDEO_INTERFACES_H
> +#define _DT_BINDINGS_VIDEO_INTERFACES_H
> +
> +#define V4L2_MBUS_VIDEO_SEPARATE_SYNC (1<< 2)
You should never be putting anything Linux specific in those dt-bindings
headers. It just happens now include/dt-bindings is a part of the Linux
kernel, but it could well be in some separate repository, or could be
a part of the DT bindings specification, which is only specific to the
hardware and doesn't depend on Linux OS at all. Thus V4L2_MBUS_ prefix
shouldn't be used here.
> +#define V4L2_MBUS_VIDEO_COMPOSITE_SYNC (1<< 3)
> +#define V4L2_MBUS_VIDEO_SYNC_ON_COMPOSITE (1<< 4)
> +#define V4L2_MBUS_VIDEO_SYNC_ON_GREEN (1<< 5)
> +#define V4L2_MBUS_VIDEO_SYNC_ON_LUMINANCE (1<< 6)
> +
> +#define V4L2_MBUS_VIDEO_INTERFACES_END 6
> +
> +#endif
> diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
> index 83ae07e..a4676dd 100644
> --- a/include/media/v4l2-mediabus.h
> +++ b/include/media/v4l2-mediabus.h
> @@ -11,6 +11,8 @@
> #ifndef V4L2_MEDIABUS_H
> #define V4L2_MEDIABUS_H
>
> +#include<dt-bindings/media/video-interfaces.h>
> +
> #include<linux/v4l2-mediabus.h>
>
> /* Parallel flags */
> @@ -28,18 +30,18 @@
> * V4L2_MBUS_[HV]SYNC* flags should be also used for specifying
> * configuration of hardware that uses [HV]REF signals
> */
> -#define V4L2_MBUS_HSYNC_ACTIVE_HIGH (1<< 2)
> -#define V4L2_MBUS_HSYNC_ACTIVE_LOW (1<< 3)
> -#define V4L2_MBUS_VSYNC_ACTIVE_HIGH (1<< 4)
> -#define V4L2_MBUS_VSYNC_ACTIVE_LOW (1<< 5)
> -#define V4L2_MBUS_PCLK_SAMPLE_RISING (1<< 6)
> -#define V4L2_MBUS_PCLK_SAMPLE_FALLING (1<< 7)
> -#define V4L2_MBUS_DATA_ACTIVE_HIGH (1<< 8)
> -#define V4L2_MBUS_DATA_ACTIVE_LOW (1<< 9)
> +#define V4L2_MBUS_HSYNC_ACTIVE_HIGH (1<< (V4L2_MBUS_VIDEO_INTERFACES_END + 1))
No, please don't do that. We shouldn't combine the DT and Linux kernel
definitions like this.
> +#define V4L2_MBUS_HSYNC_ACTIVE_LOW (1<< (V4L2_MBUS_VIDEO_INTERFACES_END + 2))
> +#define V4L2_MBUS_VSYNC_ACTIVE_HIGH (1<< (V4L2_MBUS_VIDEO_INTERFACES_END + 3))
> +#define V4L2_MBUS_VSYNC_ACTIVE_LOW (1<< (V4L2_MBUS_VIDEO_INTERFACES_END + 4))
> +#define V4L2_MBUS_PCLK_SAMPLE_RISING (1<< (V4L2_MBUS_VIDEO_INTERFACES_END + 5))
> +#define V4L2_MBUS_PCLK_SAMPLE_FALLING (1<< (V4L2_MBUS_VIDEO_INTERFACES_END + 6))
> +#define V4L2_MBUS_DATA_ACTIVE_HIGH (1<< (V4L2_MBUS_VIDEO_INTERFACES_END + 7))
> +#define V4L2_MBUS_DATA_ACTIVE_LOW (1<< (V4L2_MBUS_VIDEO_INTERFACES_END + 8))
>
> /* FIELD = 0/1 - Field1 (odd)/Field2 (even) */
> -#define V4L2_MBUS_FIELD_EVEN_HIGH (1<< 10)
> +#define V4L2_MBUS_FIELD_EVEN_HIGH (1<< (V4L2_MBUS_VIDEO_INTERFACES_END + 9))
> /* FIELD = 1/0 - Field1 (odd)/Field2 (even) */
> -#define V4L2_MBUS_FIELD_EVEN_LOW (1<< 11)
> +#define V4L2_MBUS_FIELD_EVEN_LOW (1<< (V4L2_MBUS_VIDEO_INTERFACES_END + 10))
Please see my review of your 'media: i2c: tvp7002: add OF support" patch.
AFAICS it should be sufficient to add only V4L2_MBUS_SOG_ACTIVE_{LOW,HIGH}
flags and 'sync-on-green-active' DT property.
--
Thanks,
Sylwester
Hi Sylwester,
Oops some how missed this mail, sorry for the late response.
On Sun, Jun 30, 2013 at 9:23 PM, Sylwester Nawrocki
<[email protected]> wrote:
> Hi,
>
>
> On 06/22/2013 05:03 PM, Prabhakar Lad wrote:
>>
>> From: "Lad, Prabhakar"<[email protected]>
>>
>> This patch adds video sync properties as part of endpoint
>> properties and also support to parse them in the parser.
>>
>> Signed-off-by: Lad, Prabhakar<[email protected]>
>> Cc: Hans Verkuil<[email protected]>
>> Cc: Laurent Pinchart<[email protected]>
>> Cc: Mauro Carvalho Chehab<[email protected]>
>> Cc: Guennadi Liakhovetski<[email protected]>
>> Cc: Sylwester Nawrocki<[email protected]>
>> Cc: Sakari Ailus<[email protected]>
>> Cc: Grant Likely<[email protected]>
>> Cc: Rob Herring<[email protected]>
>> Cc: Rob Landley<[email protected]>
>> Cc: [email protected]
>> Cc: [email protected]
>> Cc: [email protected]
>> Cc: [email protected]
>> Cc: Kyungmin Park<[email protected]>
>
>
> Do you really need such a long Cc list here ? I think it would be better
> to just add relevant e-mail addresses when sending the patch, otherwise
> when this patch is applied in this form all those addresses are going to
> be spammed with the patch management notifications, which might not be
> what some ones are really interested in.
>
>
Ok I'll take care of it in the next version.
>> ---
>> This patch has 10 warnings for line over 80 characters
>> for which I think can be ignored.
>>
>> RFC v2 https://patchwork.kernel.org/patch/2578091/
>> RFC V1 https://patchwork.kernel.org/patch/2572341/
>> Changes for v3:
>> 1: Fixed review comments pointed by Laurent and Sylwester.
>>
>> .../devicetree/bindings/media/video-interfaces.txt | 1 +
>> drivers/media/v4l2-core/v4l2-of.c | 20
>> ++++++++++++++++++
>> include/dt-bindings/media/video-interfaces.h | 17
>> +++++++++++++++
>> include/media/v4l2-mediabus.h | 22
>> +++++++++++---------
>> 4 files changed, 50 insertions(+), 10 deletions(-)
>> create mode 100644 include/dt-bindings/media/video-interfaces.h
>>
>> diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt
>> b/Documentation/devicetree/bindings/media/video-interfaces.txt
>> index e022d2d..2081278 100644
>> --- a/Documentation/devicetree/bindings/media/video-interfaces.txt
>> +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
>> @@ -101,6 +101,7 @@ Optional endpoint properties
>> array contains only one entry.
>> - clock-noncontinuous: a boolean property to allow MIPI CSI-2
>> non-continuous
>> clock mode.
>> +- video-sync: property indicating to sync the video on a signal in RGB.
>>
>>
>> Example
>> diff --git a/drivers/media/v4l2-core/v4l2-of.c
>> b/drivers/media/v4l2-core/v4l2-of.c
>> index aa59639..1a54530 100644
>> --- a/drivers/media/v4l2-core/v4l2-of.c
>> +++ b/drivers/media/v4l2-core/v4l2-of.c
>> @@ -100,6 +100,26 @@ static void v4l2_of_parse_parallel_bus(const struct
>> device_node *node,
>> if (!of_property_read_u32(node, "data-shift",&v))
>> bus->data_shift = v;
>>
>> + if (!of_property_read_u32(node, "video-sync",&v)) {
>> + switch (v) {
>> + case V4L2_MBUS_VIDEO_SEPARATE_SYNC:
>> + flags |= V4L2_MBUS_VIDEO_SEPARATE_SYNC;
>
>
> I'm not convinced all those video sync types is something that really
> belongs
> to the flags field. In my understanding this field is supposed to hold only
> the _signal polarity_ information.
>
>
Ok, so there should be a function say v4l2_of_parse_signal_polarity()
to get the polarity alone then.
>> + break;
>> + case V4L2_MBUS_VIDEO_COMPOSITE_SYNC:
>> + flags |= V4L2_MBUS_VIDEO_COMPOSITE_SYNC;
>> + break;
>> + case V4L2_MBUS_VIDEO_SYNC_ON_COMPOSITE:
>> + flags |= V4L2_MBUS_VIDEO_SYNC_ON_COMPOSITE;
>> + break;
>> + case V4L2_MBUS_VIDEO_SYNC_ON_GREEN:
>> + flags |= V4L2_MBUS_VIDEO_SYNC_ON_GREEN;
>> + break;
>> + case V4L2_MBUS_VIDEO_SYNC_ON_LUMINANCE:
>> + flags |= V4L2_MBUS_VIDEO_SYNC_ON_LUMINANCE;
>> + break;
>> + }
>> + }
>> +
>> bus->flags = flags;
>>
>> }
>> diff --git a/include/dt-bindings/media/video-interfaces.h
>> b/include/dt-bindings/media/video-interfaces.h
>> new file mode 100644
>> index 0000000..1a083dd
>> --- /dev/null
>> +++ b/include/dt-bindings/media/video-interfaces.h
>> @@ -0,0 +1,17 @@
>> +/*
>> + * This header provides constants for video interface.
>> + *
>> + */
>> +
>> +#ifndef _DT_BINDINGS_VIDEO_INTERFACES_H
>> +#define _DT_BINDINGS_VIDEO_INTERFACES_H
>> +
>> +#define V4L2_MBUS_VIDEO_SEPARATE_SYNC (1<< 2)
>
>
> You should never be putting anything Linux specific in those dt-bindings
> headers. It just happens now include/dt-bindings is a part of the Linux
> kernel, but it could well be in some separate repository, or could be
> a part of the DT bindings specification, which is only specific to the
> hardware and doesn't depend on Linux OS at all. Thus V4L2_MBUS_ prefix
> shouldn't be used here.
>
>
Ok
>> +#define V4L2_MBUS_VIDEO_COMPOSITE_SYNC (1<< 3)
>> +#define V4L2_MBUS_VIDEO_SYNC_ON_COMPOSITE (1<< 4)
>> +#define V4L2_MBUS_VIDEO_SYNC_ON_GREEN (1<< 5)
>> +#define V4L2_MBUS_VIDEO_SYNC_ON_LUMINANCE (1<< 6)
>> +
>> +#define V4L2_MBUS_VIDEO_INTERFACES_END 6
>> +
>> +#endif
>> diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
>> index 83ae07e..a4676dd 100644
>> --- a/include/media/v4l2-mediabus.h
>> +++ b/include/media/v4l2-mediabus.h
>> @@ -11,6 +11,8 @@
>> #ifndef V4L2_MEDIABUS_H
>> #define V4L2_MEDIABUS_H
>>
>> +#include<dt-bindings/media/video-interfaces.h>
>> +
>> #include<linux/v4l2-mediabus.h>
>>
>> /* Parallel flags */
>> @@ -28,18 +30,18 @@
>> * V4L2_MBUS_[HV]SYNC* flags should be also used for specifying
>> * configuration of hardware that uses [HV]REF signals
>> */
>> -#define V4L2_MBUS_HSYNC_ACTIVE_HIGH (1<< 2)
>> -#define V4L2_MBUS_HSYNC_ACTIVE_LOW (1<< 3)
>> -#define V4L2_MBUS_VSYNC_ACTIVE_HIGH (1<< 4)
>> -#define V4L2_MBUS_VSYNC_ACTIVE_LOW (1<< 5)
>> -#define V4L2_MBUS_PCLK_SAMPLE_RISING (1<< 6)
>> -#define V4L2_MBUS_PCLK_SAMPLE_FALLING (1<< 7)
>> -#define V4L2_MBUS_DATA_ACTIVE_HIGH (1<< 8)
>> -#define V4L2_MBUS_DATA_ACTIVE_LOW (1<< 9)
>> +#define V4L2_MBUS_HSYNC_ACTIVE_HIGH (1<<
>> (V4L2_MBUS_VIDEO_INTERFACES_END + 1))
>
>
> No, please don't do that. We shouldn't combine the DT and Linux kernel
> definitions like this.
>
>
Ok.
>> +#define V4L2_MBUS_HSYNC_ACTIVE_LOW (1<<
>> (V4L2_MBUS_VIDEO_INTERFACES_END + 2))
>> +#define V4L2_MBUS_VSYNC_ACTIVE_HIGH (1<<
>> (V4L2_MBUS_VIDEO_INTERFACES_END + 3))
>> +#define V4L2_MBUS_VSYNC_ACTIVE_LOW (1<<
>> (V4L2_MBUS_VIDEO_INTERFACES_END + 4))
>> +#define V4L2_MBUS_PCLK_SAMPLE_RISING (1<<
>> (V4L2_MBUS_VIDEO_INTERFACES_END + 5))
>> +#define V4L2_MBUS_PCLK_SAMPLE_FALLING (1<<
>> (V4L2_MBUS_VIDEO_INTERFACES_END + 6))
>> +#define V4L2_MBUS_DATA_ACTIVE_HIGH (1<<
>> (V4L2_MBUS_VIDEO_INTERFACES_END + 7))
>> +#define V4L2_MBUS_DATA_ACTIVE_LOW (1<<
>> (V4L2_MBUS_VIDEO_INTERFACES_END + 8))
>>
>> /* FIELD = 0/1 - Field1 (odd)/Field2 (even) */
>> -#define V4L2_MBUS_FIELD_EVEN_HIGH (1<< 10)
>> +#define V4L2_MBUS_FIELD_EVEN_HIGH (1<<
>> (V4L2_MBUS_VIDEO_INTERFACES_END + 9))
>> /* FIELD = 1/0 - Field1 (odd)/Field2 (even) */
>> -#define V4L2_MBUS_FIELD_EVEN_LOW (1<< 11)
>> +#define V4L2_MBUS_FIELD_EVEN_LOW (1<<
>> (V4L2_MBUS_VIDEO_INTERFACES_END + 10))
>
>
> Please see my review of your 'media: i2c: tvp7002: add OF support" patch.
> AFAICS it should be sufficient to add only V4L2_MBUS_SOG_ACTIVE_{LOW,HIGH}
> flags and 'sync-on-green-active' DT property.
>
Ok.
Regards,
--Prabhakar Lad
On 07/11/2013 01:41 PM, Prabhakar Lad wrote:
[...]
>>> diff --git a/drivers/media/v4l2-core/v4l2-of.c
>>> b/drivers/media/v4l2-core/v4l2-of.c
>>> index aa59639..1a54530 100644
>>> --- a/drivers/media/v4l2-core/v4l2-of.c
>>> +++ b/drivers/media/v4l2-core/v4l2-of.c
>>> @@ -100,6 +100,26 @@ static void v4l2_of_parse_parallel_bus(const struct
>>> device_node *node,
>>> if (!of_property_read_u32(node, "data-shift",&v))
>>> bus->data_shift = v;
>>>
>>> + if (!of_property_read_u32(node, "video-sync",&v)) {
>>> + switch (v) {
>>> + case V4L2_MBUS_VIDEO_SEPARATE_SYNC:
>>> + flags |= V4L2_MBUS_VIDEO_SEPARATE_SYNC;
>>
>>
>> I'm not convinced all those video sync types is something that really
>> belongs
>> to the flags field. In my understanding this field is supposed to hold only
>> the _signal polarity_ information.
>>
>>
> Ok, so there should be a function say v4l2_of_parse_signal_polarity()
> to get the polarity alone then.
I don't think this is required, I would just extend
v4l2_of_parse_parallel_bus()
function to also handle sync-on-green-active property.
--
Thanks,
Sylwester
Hi Sylwester,
On Fri, Jul 12, 2013 at 2:45 AM, Sylwester Nawrocki
<[email protected]> wrote:
> On 07/11/2013 01:41 PM, Prabhakar Lad wrote:
> [...]
>
>>>> diff --git a/drivers/media/v4l2-core/v4l2-of.c
>>>> b/drivers/media/v4l2-core/v4l2-of.c
>>>> index aa59639..1a54530 100644
>>>> --- a/drivers/media/v4l2-core/v4l2-of.c
>>>> +++ b/drivers/media/v4l2-core/v4l2-of.c
>>>> @@ -100,6 +100,26 @@ static void v4l2_of_parse_parallel_bus(const struct
>>>> device_node *node,
>>>> if (!of_property_read_u32(node, "data-shift",&v))
>>>> bus->data_shift = v;
>>>>
>>>> + if (!of_property_read_u32(node, "video-sync",&v)) {
>>>> + switch (v) {
>>>> + case V4L2_MBUS_VIDEO_SEPARATE_SYNC:
>>>> + flags |= V4L2_MBUS_VIDEO_SEPARATE_SYNC;
>>>
>>>
>>>
>>> I'm not convinced all those video sync types is something that really
>>> belongs
>>> to the flags field. In my understanding this field is supposed to hold
>>> only
>>> the _signal polarity_ information.
>>>
>>>
>> Ok, so there should be a function say v4l2_of_parse_signal_polarity()
>> to get the polarity alone then.
>
>
> I don't think this is required, I would just extend
> v4l2_of_parse_parallel_bus()
> function to also handle sync-on-green-active property.
>
If that is the case than I have to add a member say 'signal_polarity'
in struct v4l2_of_bus_parallel and assign the polarity to it.
Let me know if you are OK with it.
Regards,
--Prabhakar Lad
Hi Prabhakar,
On 07/12/2013 06:29 AM, Prabhakar Lad wrote:
> On Fri, Jul 12, 2013 at 2:45 AM, Sylwester Nawrocki
> <[email protected]> wrote:
>> On 07/11/2013 01:41 PM, Prabhakar Lad wrote:
>> [...]
>>
>>>>> diff --git a/drivers/media/v4l2-core/v4l2-of.c
>>>>> b/drivers/media/v4l2-core/v4l2-of.c
>>>>> index aa59639..1a54530 100644
>>>>> --- a/drivers/media/v4l2-core/v4l2-of.c
>>>>> +++ b/drivers/media/v4l2-core/v4l2-of.c
>>>>> @@ -100,6 +100,26 @@ static void v4l2_of_parse_parallel_bus(const struct
>>>>> device_node *node,
>>>>> if (!of_property_read_u32(node, "data-shift",&v))
>>>>> bus->data_shift = v;
>>>>>
>>>>> + if (!of_property_read_u32(node, "video-sync",&v)) {
>>>>> + switch (v) {
>>>>> + case V4L2_MBUS_VIDEO_SEPARATE_SYNC:
>>>>> + flags |= V4L2_MBUS_VIDEO_SEPARATE_SYNC;
>>>>
>>>>
>>>>
>>>> I'm not convinced all those video sync types is something that really
>>>> belongs
>>>> to the flags field. In my understanding this field is supposed to hold
>>>> only
>>>> the _signal polarity_ information.
>>>>
>>>>
>>> Ok, so there should be a function say v4l2_of_parse_signal_polarity()
>>> to get the polarity alone then.
>>
>>
>> I don't think this is required, I would just extend
>> v4l2_of_parse_parallel_bus()
>> function to also handle sync-on-green-active property.
>>
> If that is the case than I have to add a member say 'signal_polarity'
> in struct v4l2_of_bus_parallel and assign the polarity to it.
> Let me know if you are OK with it.
It probably would have been sensible to do something like this, however
I can't
see any advantage at the moment. struct v4l2_of_bus_parallel::flags
currently
holds all the polarity flags. Let's just add relevant macros for
sync-on-green
and store them in the flags field, as is done with the others.
Those V4L2_MUS_* flags are used by soc-camera to negotiate the
capabilities,
so I would rather not split them further without good reason, even though
struct v4l2_mbus_config::flags is used in those negotiation routines,
rather
than struct v4l2_of_bus_parallel::flags.
--
Thanks,
Sylwester