2024-03-29 19:49:47

by Witold Sadowski

[permalink] [raw]
Subject: [PATCH 1/5] spi: cadence: Add new bindings documentation for Cadence XSPI

Add new bindings:
- mrvl,xspi-nor compatible string
Compatible string to enable Marvell XSPI modification
- Multiple PHY configuration registers
- base for xfer register set

Signed-off-by: Witold Sadowski <[email protected]>
---
.../devicetree/bindings/spi/cdns,xspi.yaml | 84 ++++++++++++++++++-
1 file changed, 83 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
index eb0f92468185..d1fde8d4e9b8 100644
--- a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
+++ b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
@@ -20,23 +20,74 @@ allOf:

properties:
compatible:
- const: cdns,xspi-nor
+ - const: cdns,xspi-nor
+ - const: mrvl,xspi-nor

reg:
items:
- description: address and length of the controller register set
- description: address and length of the Slave DMA data port
- description: address and length of the auxiliary registers
+ - description: address and length of the xfer registers

reg-names:
items:
- const: io
- const: sdma
- const: aux
+ - const: xferbase

interrupts:
maxItems: 1

+ cdns,dll-phy-control:
+ description: |
+ PHY config register. Valid only for cdns,mrvl-xspi-nor
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0x707
+
+ cdns,rfile-phy-control:
+ description: |
+ PHY config register. Valid only for cdns,mrvl-xspi-nor
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0x40000
+
+ cdns,rfile-phy-tsel:
+ description: |
+ PHY config register. Valid only for cdns,mrvl-xspi-nor
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+
+ cdns,phy-dq-timing:
+ description: |
+ PHY config register. Valid only for cdns,mrvl-xspi-nor
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0x101
+
+ cdns,phy-dqs-timing:
+ description: |
+ PHY config register. Valid only for cdns,mrvl-xspi-nor
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0x700404
+
+ cdns,phy-gate-lpbk-ctrl:
+ description: |
+ PHY config register. Valid only for cdns,mrvl-xspi-nor
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0x200030
+
+ cdns,phy-dll-master-ctrl:
+ description: |
+ PHY config register. Valid only for cdns,mrvl-xspi-nor
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0x00800000
+
+ cdns,phy-dll-slave-ctrl:
+ description: |
+ PHY config register. Valid only for cdns,mrvl-xspi-nor
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0x0000ff01
+
required:
- compatible
- reg
@@ -68,6 +119,37 @@ examples:
reg = <0>;
};

+ flash@1 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <75000000>;
+ reg = <1>;
+ };
+ };
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ xspi: spi@a0010000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mrvl,xspi-nor";
+ reg = <0x0 0xa0010000 0x0 0x1040>,
+ <0x0 0xb0000000 0x0 0x1000>,
+ <0x0 0xa0020000 0x0 0x100>;
+ <0x0 0xa0090000 0x0 0x100>;
+ reg-names = "io", "sdma", "aux", "xferbase";
+ interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <75000000>;
+ reg = <0>;
+ };
+
flash@1 {
compatible = "jedec,spi-nor";
spi-max-frequency = <75000000>;
--
2.17.1



2024-03-29 21:09:35

by Rob Herring (Arm)

[permalink] [raw]
Subject: Re: [PATCH 1/5] spi: cadence: Add new bindings documentation for Cadence XSPI


On Fri, 29 Mar 2024 12:48:45 -0700, Witold Sadowski wrote:
> Add new bindings:
> - mrvl,xspi-nor compatible string
> Compatible string to enable Marvell XSPI modification
> - Multiple PHY configuration registers
> - base for xfer register set
>
> Signed-off-by: Witold Sadowski <[email protected]>
> ---
> .../devicetree/bindings/spi/cdns,xspi.yaml | 84 ++++++++++++++++++-
> 1 file changed, 83 insertions(+), 1 deletion(-)
>

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/spi/cdns,xspi.yaml: properties:compatible: [{'const': 'cdns,xspi-nor'}, {'const': 'mrvl,xspi-nor'}] is not of type 'object', 'boolean'
from schema $id: http://json-schema.org/draft-07/schema#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/spi/cdns,xspi.yaml: properties:compatible: [{'const': 'cdns,xspi-nor'}, {'const': 'mrvl,xspi-nor'}] is not of type 'object', 'boolean'
from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/spi/cdns,xspi.yaml: ignoring, error in schema: properties: compatible
Error: Documentation/devicetree/bindings/spi/cdns,xspi.example.dts:88.23-24 syntax error
FATAL ERROR: Unable to parse input tree
make[2]: *** [scripts/Makefile.lib:427: Documentation/devicetree/bindings/spi/cdns,xspi.example.dtb] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1430: dt_binding_check] Error 2
make: *** [Makefile:240: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.


2024-03-30 11:32:45

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [PATCH 1/5] spi: cadence: Add new bindings documentation for Cadence XSPI

On 29/03/2024 20:48, Witold Sadowski wrote:
> Add new bindings:
> - mrvl,xspi-nor compatible string
> Compatible string to enable Marvell XSPI modification
> - Multiple PHY configuration registers
> - base for xfer register set
>
> Signed-off-by: Witold Sadowski <[email protected]>

Please use subject prefixes matching the subsystem. You can get them for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching.


> ---
> .../devicetree/bindings/spi/cdns,xspi.yaml | 84 ++++++++++++++++++-
> 1 file changed, 83 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
> index eb0f92468185..d1fde8d4e9b8 100644
> --- a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
> +++ b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml
> @@ -20,23 +20,74 @@ allOf:
>
> properties:
> compatible:
> - const: cdns,xspi-nor
> + - const: cdns,xspi-nor
> + - const: mrvl,xspi-nor

It does not look like you tested the bindings, at least after quick
look. Please run `make dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).
Maybe you need to update your dtschema and yamllint.

There is a lot of things happening here, but I won't perform review if
the code was never tested. Sorry, please test before sending.

Best regards,
Krzysztof


2024-03-31 10:44:39

by kernel test robot

[permalink] [raw]
Subject: Re: [PATCH 1/5] spi: cadence: Add new bindings documentation for Cadence XSPI

Hi Witold,

kernel test robot noticed the following build warnings:

[auto build test WARNING on broonie-spi/for-next]
[also build test WARNING on linus/master v6.9-rc1 next-20240328]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url: https://github.com/intel-lab-lkp/linux/commits/Witold-Sadowski/spi-cadence-Add-new-bindings-documentation-for-Cadence-XSPI/20240330-035124
base: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
patch link: https://lore.kernel.org/r/20240329194849.25554-2-wsadowski%40marvell.com
patch subject: [PATCH 1/5] spi: cadence: Add new bindings documentation for Cadence XSPI
compiler: loongarch64-linux-gcc (GCC) 13.2.0
reproduce: (https://download.01.org/0day-ci/archive/20240331/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

dtcheck warnings: (new ones prefixed by >>)
>> Documentation/devicetree/bindings/spi/cdns,xspi.yaml: properties:compatible: [{'const': 'cdns,xspi-nor'}, {'const': 'mrvl,xspi-nor'}] is not of type 'object', 'boolean'
from schema $id: http://json-schema.org/draft-07/schema#
>> Documentation/devicetree/bindings/spi/cdns,xspi.yaml: properties:compatible: [{'const': 'cdns,xspi-nor'}, {'const': 'mrvl,xspi-nor'}] is not of type 'object', 'boolean'
from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#
--
>> Documentation/devicetree/bindings/spi/cdns,xspi.yaml: ignoring, error in schema: properties: compatible
Documentation/devicetree/bindings/net/snps,dwmac.yaml: mac-mode: missing type definition

--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki

2024-04-29 07:49:03

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [PATCH 1/5] spi: cadence: Add new bindings documentation for Cadence XSPI

On 30/03/2024 12:32, Krzysztof Kozlowski wrote:

..

>>
>> properties:
>> compatible:
>> - const: cdns,xspi-nor
>> + - const: cdns,xspi-nor
>> + - const: mrvl,xspi-nor
>
> It does not look like you tested the bindings, at least after quick
> look. Please run `make dt_binding_check` (see
> Documentation/devicetree/bindings/writing-schema.rst for instructions).
> Maybe you need to update your dtschema and yamllint.
>
> There is a lot of things happening here, but I won't perform review if
> the code was never tested. Sorry, please test before sending.

Hi,

You did not address any of the comments and build issues neither here
nor in previous mailings. Starting from 2022, all previous comments look
ignored and then after some time you send another v1 expecting us to do
review of the same code with the same issues.

I gave it 1 month for some sort of response from you. None came.

Therefore let's be clear: I will automatically NAK any further version
you send, based on assumption you ignored entire existing feedback.
Before sending any new patches for this XSPI, please first respond to
numerous emails you already got (from the last two years). That's way we
will know that reviewer's feedback is being addressed.

Thank you for understanding.

Best regards,
Krzysztof