From: Xinming Hu <[email protected]>
Add device tree binding documentation for MARVELL's bluetooth sdio
(sd8897 and sd8997) chip.
Signed-off-by: Xinming Hu <[email protected]>
Signed-off-by: Amitkumar Karwar <[email protected]>
---
Listing changelist for both 1/2 and 2/2 here
v2: Fixed build error reported by kbuild test robot
drivers/bluetooth/btmrvl_platform.c:141:22: error:
'btmrvl_plt_pm_ops' undeclared here (not in a function)
v3: Add NULL check for 'btmrvl_plt_dev'
v4: Moved the bindings file to bindings/net/
Corrected the name of 'name' and 'compatible' properties(Rob Herring)
v5: Comments for wlan patches were applicable here as well. Like all binding
changes in single file, specifying node as a child of SDIO controller.
---
Documentation/devicetree/bindings/btmrvl.txt | 29 ------------
.../devicetree/bindings/net/marvell-bt-sd8xxx.txt | 55 ++++++++++++++++++++++
2 files changed, 55 insertions(+), 29 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/btmrvl.txt
create mode 100644 Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt
diff --git a/Documentation/devicetree/bindings/btmrvl.txt b/Documentation/devicetree/bindings/btmrvl.txt
deleted file mode 100644
index 58f964b..0000000
--- a/Documentation/devicetree/bindings/btmrvl.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-btmrvl
-------
-
-Required properties:
-
- - compatible : must be "btmrvl,cfgdata"
-
-Optional properties:
-
- - btmrvl,cal-data : Calibration data downloaded to the device during
- initialization. This is an array of 28 values(u8).
-
- - btmrvl,gpio-gap : gpio and gap (in msecs) combination to be
- configured.
-
-Example:
-
-GPIO pin 13 is configured as a wakeup source and GAP is set to 100 msecs
-in below example.
-
-btmrvl {
- compatible = "btmrvl,cfgdata";
-
- btmrvl,cal-data = /bits/ 8 <
- 0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02
- 0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00
- 0x00 0x00 0xf0 0x00>;
- btmrvl,gpio-gap = <0x0d64>;
-};
diff --git a/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt
new file mode 100644
index 0000000..b031431
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt
@@ -0,0 +1,55 @@
+Marvell 8897/8997 (sd8897/sd8997) bluetooth SDIO devices
+------
+
+Required properties:
+
+ - compatible : should be one of the following:
+ * "marvell,bt-sd8897"
+ * "marvell,bt-sd8997"
+
+Optional properties:
+
+ - btmrvl,cal-data : Calibration data downloaded to the device during
+ initialization. This is an array of 28 values(u8).
+
+ - btmrvl,wakeuppin-gap : wakeup pin and gap (in msecs) combination to be
+ configured to firmware. 'wakeuppin' is a wakeup pin number
+ of bluetooth chip. 'gap' is a wakeup latency of a host platform.
+ This is needed to work chip's sleep feature as expected.
+ - interrupt-parent: phandle of the parent interrupt controller
+ - interrupts : interrupt pin number to the cpu. driver will request an irq based on
+ this interrupt number. during system suspend, the irq will be enabled
+ as system wakeup source, so that the bluetooth chip can wakeup host
+ platform under certain condition. during system resume, the irq will
+ be disabled to make sure unnecessary interrupt is not received.
+
+Example:
+
+IRQ pin 119 is used as system wakeup source interrupt.
+wakeuppin 13 and gap 100ms are configured so that firmware can wakeup host
+using this device side pin and wakeup latency.
+calibration data is also available in below example.
+
+&mmc3 {
+ status = "okay";
+ vmmc-supply = <&wlan_en_reg>;
+ bus-width = <4>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ btmrvl: btmrvl@3 {
+ compatible = "marvell,bt-sd8897";
+ reg = <2>;
+ interrupt-parent = <&pio>;
+ interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
+
+ btmrvl,cal-data = /bits/ 8 <
+ 0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02
+ 0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00
+ 0x00 0x00 0xf0 0x00>;
+ btmrvl,wakeuppin-gap = <0x0d64>;
+ };
+};
+
--
1.8.1.4
From: Xinming Hu <[email protected]>
On some arm-based platforms, we need to configure platform specific
parameters by device tree node and we need define our node as a child
node of parent SDIO host controller.
This patch parses these parameters from device tree. It includes
calibration data download to firmware, wakeup pin configured to firmware,
and soc specific wakeup interrupt pin.
Signed-off-by: Xinming Hu <[email protected]>
Signed-off-by: Amitkumar Karwar <[email protected]>
---
drivers/bluetooth/btmrvl_drv.h | 11 ++++++
drivers/bluetooth/btmrvl_main.c | 20 +++++------
drivers/bluetooth/btmrvl_sdio.c | 79 +++++++++++++++++++++++++++++++++++++++++
drivers/bluetooth/btmrvl_sdio.h | 6 ++++
4 files changed, 105 insertions(+), 11 deletions(-)
diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h
index 0590473..f742384 100644
--- a/drivers/bluetooth/btmrvl_drv.h
+++ b/drivers/bluetooth/btmrvl_drv.h
@@ -23,6 +23,17 @@
#include <linux/bitops.h>
#include <linux/slab.h>
#include <net/bluetooth/bluetooth.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/gfp.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/of_irq.h>
#define BTM_HEADER_LEN 4
#define BTM_UPLD_SIZE 2312
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index f25a825..b7c32f4 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -510,34 +510,32 @@ static int btmrvl_download_cal_data(struct btmrvl_private *priv,
static int btmrvl_check_device_tree(struct btmrvl_private *priv)
{
struct device_node *dt_node;
+ struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
u8 cal_data[BT_CAL_HDR_LEN + BT_CAL_DATA_SIZE];
- int ret;
+ int ret = 0;
u32 val;
- for_each_compatible_node(dt_node, NULL, "btmrvl,cfgdata") {
- ret = of_property_read_u32(dt_node, "btmrvl,gpio-gap", &val);
+ if (card->plt_of_node) {
+ dt_node = card->plt_of_node;
+ ret = of_property_read_u32(dt_node, "btmrvl,wakeuppin-gap",
+ &val);
if (!ret)
priv->btmrvl_dev.gpio_gap = val;
ret = of_property_read_u8_array(dt_node, "btmrvl,cal-data",
cal_data + BT_CAL_HDR_LEN,
BT_CAL_DATA_SIZE);
- if (ret) {
- of_node_put(dt_node);
+ if (ret)
return ret;
- }
BT_DBG("Use cal data from device tree");
ret = btmrvl_download_cal_data(priv, cal_data,
BT_CAL_DATA_SIZE);
- if (ret) {
+ if (ret)
BT_ERR("Fail to download calibrate data");
- of_node_put(dt_node);
- return ret;
- }
}
- return 0;
+ return ret;
}
static int btmrvl_setup(struct hci_dev *hdev)
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 6ed8acf..845ef28 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -52,6 +52,68 @@ static struct memory_type_mapping mem_type_mapping_tbl[] = {
{"EXTLAST", NULL, 0, 0xFE},
};
+static const struct of_device_id btmrvl_sdio_of_match_table[] = {
+ { .compatible = "marvell,bt-sd8897" },
+ { .compatible = "marvell,bt-sd8997" },
+ { }
+};
+
+static irqreturn_t btmrvl_wake_irq_bt(int irq, void *priv)
+{
+ struct btmrvl_plt_wake_cfg *cfg = priv;
+
+ if (cfg->irq_bt >= 0) {
+ pr_info("%s: wake by bt", __func__);
+ cfg->wake_by_bt = true;
+ disable_irq_nosync(irq);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/* This function parse device tree node using mmc subnode devicetree API.
+ * The device node is saved in card->plt_of_node.
+ * if the device tree node exist and include interrupts attributes, this
+ * function will also request platform specific wakeup interrupt.
+ */
+static int btmrvl_sdio_probe_of(struct device *dev,
+ struct btmrvl_sdio_card *card)
+{
+ struct btmrvl_plt_wake_cfg *cfg;
+ int ret;
+
+ if (!dev->of_node ||
+ !of_match_node(btmrvl_sdio_of_match_table, dev->of_node)) {
+ pr_err("sdio platform data not available");
+ return -1;
+ }
+
+ card->plt_of_node = dev->of_node;
+
+ card->plt_wake_cfg = devm_kzalloc(dev, sizeof(*card->plt_wake_cfg),
+ GFP_KERNEL);
+ cfg = card->plt_wake_cfg;
+ if (cfg && card->plt_of_node) {
+ cfg->irq_bt = irq_of_parse_and_map(card->plt_of_node, 0);
+ if (!cfg->irq_bt) {
+ dev_err(dev, "fail to parse irq_bt from device tree");
+ } else {
+ ret = devm_request_irq(dev, cfg->irq_bt,
+ btmrvl_wake_irq_bt,
+ IRQF_TRIGGER_LOW,
+ "bt_wake", cfg);
+ if (ret) {
+ dev_err(dev,
+ "Failed to request irq_bt %d (%d)\n",
+ cfg->irq_bt, ret);
+ }
+ disable_irq(cfg->irq_bt);
+ }
+ }
+
+ return 0;
+}
+
/* The btmrvl_sdio_remove() callback function is called
* when user removes this module from kernel space or ejects
* the card from the slot. The driver handles these 2 cases
@@ -1464,6 +1526,9 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
btmrvl_sdio_enable_host_int(card);
+ /* device tree node parsing and platform specific configuration*/
+ btmrvl_sdio_probe_of(&func->dev, card);
+
priv = btmrvl_add_card(card);
if (!priv) {
BT_ERR("Initializing card failed!");
@@ -1544,6 +1609,13 @@ static int btmrvl_sdio_suspend(struct device *dev)
return 0;
}
+ /* Enable platform specific wakeup interrupt */
+ if (card->plt_wake_cfg && card->plt_wake_cfg->irq_bt >= 0) {
+ card->plt_wake_cfg->wake_by_bt = false;
+ enable_irq(card->plt_wake_cfg->irq_bt);
+ enable_irq_wake(card->plt_wake_cfg->irq_bt);
+ }
+
priv = card->priv;
priv->adapter->is_suspending = true;
hcidev = priv->btmrvl_dev.hcidev;
@@ -1606,6 +1678,13 @@ static int btmrvl_sdio_resume(struct device *dev)
BT_DBG("%s: SDIO resume", hcidev->name);
hci_resume_dev(hcidev);
+ /* Disable platform specific wakeup interrupt */
+ if (card->plt_wake_cfg && card->plt_wake_cfg->irq_bt >= 0) {
+ disable_irq_wake(card->plt_wake_cfg->irq_bt);
+ if (!card->plt_wake_cfg->wake_by_bt)
+ disable_irq(card->plt_wake_cfg->irq_bt);
+ }
+
return 0;
}
diff --git a/drivers/bluetooth/btmrvl_sdio.h b/drivers/bluetooth/btmrvl_sdio.h
index 1a3bd06..3a522d2 100644
--- a/drivers/bluetooth/btmrvl_sdio.h
+++ b/drivers/bluetooth/btmrvl_sdio.h
@@ -62,6 +62,10 @@
#define FIRMWARE_READY 0xfedc
+struct btmrvl_plt_wake_cfg {
+ int irq_bt;
+ bool wake_by_bt;
+};
struct btmrvl_sdio_card_reg {
u8 cfg;
@@ -97,6 +101,8 @@ struct btmrvl_sdio_card {
u16 sd_blksz_fw_dl;
u8 rx_unit;
struct btmrvl_private *priv;
+ struct device_node *plt_of_node;
+ struct btmrvl_plt_wake_cfg *plt_wake_cfg;
};
struct btmrvl_sdio_device {
--
1.8.1.4
> From: Amitkumar Karwar [mailto:[email protected]]
> Sent: Friday, March 18, 2016 4:35 PM
> To: [email protected]
> Cc: Cathy Luo; [email protected]; Nishant Sarmukadam;
> [email protected]; Wei-Ning Huang; Xinming Hu; Amitkumar Karwar
> Subject: [PATCH 2/2] btmrvl: add platform specific wakeup interrupt
> support
>
> From: Xinming Hu <[email protected]>
>
> On some arm-based platforms, we need to configure platform specific
> parameters by device tree node and we need define our node as a child
> node of parent SDIO host controller.
> This patch parses these parameters from device tree. It includes
> calibration data download to firmware, wakeup pin configured to
> firmware, and soc specific wakeup interrupt pin.
>
> Signed-off-by: Xinming Hu <[email protected]>
> Signed-off-by: Amitkumar Karwar <[email protected]>
> ---
> drivers/bluetooth/btmrvl_drv.h | 11 ++++++
> drivers/bluetooth/btmrvl_main.c | 20 +++++------
> drivers/bluetooth/btmrvl_sdio.c | 79
> +++++++++++++++++++++++++++++++++++++++++
> drivers/bluetooth/btmrvl_sdio.h | 6 ++++
> 4 files changed, 105 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/bluetooth/btmrvl_drv.h
> b/drivers/bluetooth/btmrvl_drv.h index 0590473..f742384 100644
> --- a/drivers/bluetooth/btmrvl_drv.h
> +++ b/drivers/bluetooth/btmrvl_drv.h
> @@ -23,6 +23,17 @@
> #include <linux/bitops.h>
> #include <linux/slab.h>
> #include <net/bluetooth/bluetooth.h>
> +#include <linux/err.h>
> +#include <linux/gpio.h>
> +#include <linux/gfp.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/of_gpio.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/slab.h>
> +#include <linux/of_irq.h>
>
> #define BTM_HEADER_LEN 4
> #define BTM_UPLD_SIZE 2312
> diff --git a/drivers/bluetooth/btmrvl_main.c
> b/drivers/bluetooth/btmrvl_main.c index f25a825..b7c32f4 100644
> --- a/drivers/bluetooth/btmrvl_main.c
> +++ b/drivers/bluetooth/btmrvl_main.c
> @@ -510,34 +510,32 @@ static int btmrvl_download_cal_data(struct
> btmrvl_private *priv, static int btmrvl_check_device_tree(struct
> btmrvl_private *priv) {
> struct device_node *dt_node;
> + struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
> u8 cal_data[BT_CAL_HDR_LEN + BT_CAL_DATA_SIZE];
> - int ret;
> + int ret = 0;
> u32 val;
>
> - for_each_compatible_node(dt_node, NULL, "btmrvl,cfgdata") {
> - ret = of_property_read_u32(dt_node, "btmrvl,gpio-gap",
> &val);
> + if (card->plt_of_node) {
> + dt_node = card->plt_of_node;
> + ret = of_property_read_u32(dt_node, "btmrvl,wakeuppin-gap",
> + &val);
> if (!ret)
> priv->btmrvl_dev.gpio_gap = val;
>
> ret = of_property_read_u8_array(dt_node, "btmrvl,cal-data",
> cal_data + BT_CAL_HDR_LEN,
> BT_CAL_DATA_SIZE);
> - if (ret) {
> - of_node_put(dt_node);
> + if (ret)
> return ret;
> - }
>
> BT_DBG("Use cal data from device tree");
> ret = btmrvl_download_cal_data(priv, cal_data,
> BT_CAL_DATA_SIZE);
> - if (ret) {
> + if (ret)
> BT_ERR("Fail to download calibrate data");
> - of_node_put(dt_node);
> - return ret;
> - }
> }
>
> - return 0;
> + return ret;
> }
>
> static int btmrvl_setup(struct hci_dev *hdev) diff --git
> a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
> index 6ed8acf..845ef28 100644
> --- a/drivers/bluetooth/btmrvl_sdio.c
> +++ b/drivers/bluetooth/btmrvl_sdio.c
> @@ -52,6 +52,68 @@ static struct memory_type_mapping
> mem_type_mapping_tbl[] = {
> {"EXTLAST", NULL, 0, 0xFE},
> };
>
> +static const struct of_device_id btmrvl_sdio_of_match_table[] = {
> + { .compatible = "marvell,bt-sd8897" },
> + { .compatible = "marvell,bt-sd8997" },
> + { }
> +};
> +
> +static irqreturn_t btmrvl_wake_irq_bt(int irq, void *priv) {
> + struct btmrvl_plt_wake_cfg *cfg = priv;
> +
> + if (cfg->irq_bt >= 0) {
> + pr_info("%s: wake by bt", __func__);
> + cfg->wake_by_bt = true;
> + disable_irq_nosync(irq);
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +/* This function parse device tree node using mmc subnode devicetree
> API.
> + * The device node is saved in card->plt_of_node.
> + * if the device tree node exist and include interrupts attributes,
> +this
> + * function will also request platform specific wakeup interrupt.
> + */
> +static int btmrvl_sdio_probe_of(struct device *dev,
> + struct btmrvl_sdio_card *card)
> +{
> + struct btmrvl_plt_wake_cfg *cfg;
> + int ret;
> +
> + if (!dev->of_node ||
> + !of_match_node(btmrvl_sdio_of_match_table, dev->of_node)) {
> + pr_err("sdio platform data not available");
> + return -1;
> + }
> +
> + card->plt_of_node = dev->of_node;
> +
> + card->plt_wake_cfg = devm_kzalloc(dev, sizeof(*card-
> >plt_wake_cfg),
> + GFP_KERNEL);
> + cfg = card->plt_wake_cfg;
> + if (cfg && card->plt_of_node) {
> + cfg->irq_bt = irq_of_parse_and_map(card->plt_of_node, 0);
> + if (!cfg->irq_bt) {
> + dev_err(dev, "fail to parse irq_bt from device tree");
> + } else {
> + ret = devm_request_irq(dev, cfg->irq_bt,
> + btmrvl_wake_irq_bt,
> + IRQF_TRIGGER_LOW,
> + "bt_wake", cfg);
> + if (ret) {
> + dev_err(dev,
> + "Failed to request irq_bt %d (%d)\n",
> + cfg->irq_bt, ret);
> + }
> + disable_irq(cfg->irq_bt);
> + }
> + }
> +
> + return 0;
> +}
> +
> /* The btmrvl_sdio_remove() callback function is called
> * when user removes this module from kernel space or ejects
> * the card from the slot. The driver handles these 2 cases @@ -1464,6
> +1526,9 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
>
> btmrvl_sdio_enable_host_int(card);
>
> + /* device tree node parsing and platform specific configuration*/
> + btmrvl_sdio_probe_of(&func->dev, card);
> +
> priv = btmrvl_add_card(card);
> if (!priv) {
> BT_ERR("Initializing card failed!");
> @@ -1544,6 +1609,13 @@ static int btmrvl_sdio_suspend(struct device
> *dev)
> return 0;
> }
>
> + /* Enable platform specific wakeup interrupt */
> + if (card->plt_wake_cfg && card->plt_wake_cfg->irq_bt >= 0) {
> + card->plt_wake_cfg->wake_by_bt = false;
> + enable_irq(card->plt_wake_cfg->irq_bt);
> + enable_irq_wake(card->plt_wake_cfg->irq_bt);
> + }
> +
> priv = card->priv;
> priv->adapter->is_suspending = true;
> hcidev = priv->btmrvl_dev.hcidev;
> @@ -1606,6 +1678,13 @@ static int btmrvl_sdio_resume(struct device *dev)
> BT_DBG("%s: SDIO resume", hcidev->name);
> hci_resume_dev(hcidev);
>
> + /* Disable platform specific wakeup interrupt */
> + if (card->plt_wake_cfg && card->plt_wake_cfg->irq_bt >= 0) {
> + disable_irq_wake(card->plt_wake_cfg->irq_bt);
> + if (!card->plt_wake_cfg->wake_by_bt)
> + disable_irq(card->plt_wake_cfg->irq_bt);
> + }
> +
> return 0;
> }
>
> diff --git a/drivers/bluetooth/btmrvl_sdio.h
> b/drivers/bluetooth/btmrvl_sdio.h index 1a3bd06..3a522d2 100644
> --- a/drivers/bluetooth/btmrvl_sdio.h
> +++ b/drivers/bluetooth/btmrvl_sdio.h
> @@ -62,6 +62,10 @@
>
> #define FIRMWARE_READY 0xfedc
>
> +struct btmrvl_plt_wake_cfg {
> + int irq_bt;
> + bool wake_by_bt;
> +};
>
> struct btmrvl_sdio_card_reg {
> u8 cfg;
> @@ -97,6 +101,8 @@ struct btmrvl_sdio_card {
> u16 sd_blksz_fw_dl;
> u8 rx_unit;
> struct btmrvl_private *priv;
> + struct device_node *plt_of_node;
> + struct btmrvl_plt_wake_cfg *plt_wake_cfg;
> };
>
> struct btmrvl_sdio_device {
> --
> 1.8.1.4
Kindly ignore this patch. I missed to edit the version. i.e. PATCH 2/2 -> PATCH v5 2/2
It has been resent.
Regards,
Amit
On Fri, Mar 18, 2016 at 04:04:43AM -0700, Amitkumar Karwar wrote:
> From: Xinming Hu <[email protected]>
>
> Add device tree binding documentation for MARVELL's bluetooth sdio
> (sd8897 and sd8997) chip.
>
> Signed-off-by: Xinming Hu <[email protected]>
> Signed-off-by: Amitkumar Karwar <[email protected]>
> ---
> Listing changelist for both 1/2 and 2/2 here
> v2: Fixed build error reported by kbuild test robot
> drivers/bluetooth/btmrvl_platform.c:141:22: error:
> 'btmrvl_plt_pm_ops' undeclared here (not in a function)
>
> v3: Add NULL check for 'btmrvl_plt_dev'
>
> v4: Moved the bindings file to bindings/net/
> Corrected the name of 'name' and 'compatible' properties(Rob Herring)
>
> v5: Comments for wlan patches were applicable here as well. Like all binding
> changes in single file, specifying node as a child of SDIO controller.
> ---
> Documentation/devicetree/bindings/btmrvl.txt | 29 ------------
> .../devicetree/bindings/net/marvell-bt-sd8xxx.txt | 55 ++++++++++++++++++++++
> 2 files changed, 55 insertions(+), 29 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/btmrvl.txt
> create mode 100644 Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt
>
> diff --git a/Documentation/devicetree/bindings/btmrvl.txt b/Documentation/devicetree/bindings/btmrvl.txt
> deleted file mode 100644
> index 58f964b..0000000
> --- a/Documentation/devicetree/bindings/btmrvl.txt
> +++ /dev/null
> @@ -1,29 +0,0 @@
> -btmrvl
> -------
> -
> -Required properties:
> -
> - - compatible : must be "btmrvl,cfgdata"
> -
> -Optional properties:
> -
> - - btmrvl,cal-data : Calibration data downloaded to the device during
> - initialization. This is an array of 28 values(u8).
> -
> - - btmrvl,gpio-gap : gpio and gap (in msecs) combination to be
> - configured.
> -
> -Example:
> -
> -GPIO pin 13 is configured as a wakeup source and GAP is set to 100 msecs
> -in below example.
> -
> -btmrvl {
> - compatible = "btmrvl,cfgdata";
> -
> - btmrvl,cal-data = /bits/ 8 <
> - 0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02
> - 0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00
> - 0x00 0x00 0xf0 0x00>;
> - btmrvl,gpio-gap = <0x0d64>;
> -};
> diff --git a/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt b/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt
> new file mode 100644
> index 0000000..b031431
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/marvell-bt-sd8xxx.txt
> @@ -0,0 +1,55 @@
> +Marvell 8897/8997 (sd8897/sd8997) bluetooth SDIO devices
> +------
> +
> +Required properties:
> +
> + - compatible : should be one of the following:
> + * "marvell,bt-sd8897"
> + * "marvell,bt-sd8997"
<chip>-bt would be preferred order.
> +
> +Optional properties:
> +
> + - btmrvl,cal-data : Calibration data downloaded to the device during
> + initialization. This is an array of 28 values(u8).
> +
> + - btmrvl,wakeuppin-gap : wakeup pin and gap (in msecs) combination to be
> + configured to firmware. 'wakeuppin' is a wakeup pin number
> + of bluetooth chip. 'gap' is a wakeup latency of a host platform.
> + This is needed to work chip's sleep feature as expected.
Make this 2 properties.
> + - interrupt-parent: phandle of the parent interrupt controller
> + - interrupts : interrupt pin number to the cpu. driver will request an irq based on
> + this interrupt number. during system suspend, the irq will be enabled
> + as system wakeup source, so that the bluetooth chip can wakeup host
> + platform under certain condition. during system resume, the irq will
> + be disabled to make sure unnecessary interrupt is not received.
> +
> +Example:
> +
> +IRQ pin 119 is used as system wakeup source interrupt.
> +wakeuppin 13 and gap 100ms are configured so that firmware can wakeup host
> +using this device side pin and wakeup latency.
> +calibration data is also available in below example.
> +
> +&mmc3 {
> + status = "okay";
> + vmmc-supply = <&wlan_en_reg>;
> + bus-width = <4>;
> + cap-power-off-card;
> + keep-power-in-suspend;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + btmrvl: btmrvl@3 {
> + compatible = "marvell,bt-sd8897";
> + reg = <2>;
Same unit-address and reg mismatch.
> + interrupt-parent = <&pio>;
> + interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
> +
> + btmrvl,cal-data = /bits/ 8 <
> + 0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02
> + 0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00
> + 0x00 0x00 0xf0 0x00>;
> + btmrvl,wakeuppin-gap = <0x0d64>;
> + };
> +};
> +
> --
> 1.8.1.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html