This patch adds ktd2692 Flash LED driver with LED Flash class
Change in v6:
- Change goto label to if-else
- Change DT binding style for LED device binding
Change in v5:
- Clean up the code
- Fix help message of Kconfig
- Fix issue related with regulator and mutex usage
- Remove tab spaces in bindings
Change in v4:
- Clean up the code
- Modify binding documentation of ktd2692
Change in v3:
- Clean up the code
- Add aux gpio pin to control Flash LED
Change in v2:
- Introduction of LED Flash class as Jacek's comment
- Supplement of binding documentation
- Rename gpio control pin and remove unused pin
- Add regulator for the Flash LED
Ingi Kim (3):
of: Add vendor prefix for Kinetic technologies
leds: ktd2692: add device tree bindings for ktd2692
leds: Add ktd2692 flash LED driver
.../devicetree/bindings/leds/leds-ktd2692.txt | 40 ++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
drivers/leds/Kconfig | 9 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-ktd2692.c | 408 +++++++++++++++++++++
5 files changed, 459 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt
create mode 100644 drivers/leds/leds-ktd2692.c
--
2.0.5
This patch adds vendor prefix for Kinetic technologies
Signed-off-by: Ingi Kim <[email protected]>
Acked-by: Rob Herring <[email protected]>
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index fae26d0..90a4be1 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -100,6 +100,7 @@ isee ISEE 2007 S.L.
isil Intersil
karo Ka-Ro electronics GmbH
keymile Keymile GmbH
+kinetic Kinetic Technologies
lacie LaCie
lantiq Lantiq Semiconductor
lenovo Lenovo Group Ltd.
--
2.0.5
This patch adds the device tree bindings for ktd2692 flash LEDs.
Add Optional properties of child node for Flash LED
Signed-off-by: Ingi Kim <[email protected]>
---
.../devicetree/bindings/leds/leds-ktd2692.txt | 40 ++++++++++++++++++++++
1 file changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt
diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
new file mode 100644
index 0000000..68bb59e
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
@@ -0,0 +1,40 @@
+* Kinetic Technologies - KTD2692 Flash LED Driver
+
+KTD2692 is the ideal power solution for high-power flash LEDs.
+It uses ExpressWire single-wire programming for maximum flexibility.
+
+The ExpressWire interface through CTRL pin can control LED on/off and
+enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
+Flash timeout, LVP(low voltage protection).
+
+Also, When the AUX pin is pulled high while CTRL pin is high,
+LED current will be ramped up to the flash-mode current level.
+
+Required properties:
+- compatible: "kinetic,ktd2692"
+- ctrl-gpio : gpio pin in order control CTRL pin
+- aux-gpio : gpio pin in order control AUX pin
+- vin-supply : "vin" LED supply (2.7V to 5.5V)
+ See Documentation/devicetree/bindings/regulator/regulator.txt
+
+A discrete LED element connected to the device must be represented by a child
+node - see Documentation/devicetree/bindings/leds/common.txt.
+
+Optional properties of flash LED child node:
+- label : see Documentation/devicetree/bindings/leds/common.txt
+- flash-timeout-us : Maximum flash timeout in microseconds.
+ flash timeout ranges from 0 to 1835000us and default is 1049000us.
+
+Example:
+
+ktd2692 {
+ compatible = "kinetic,ktd2692";
+ ctrl-gpio = <&gpc0 1 0>;
+ aux-gpio = <&gpc0 2 0>;
+ vin-supply = <&vbat>;
+
+ flash-led {
+ label = "ktd2692-flash";
+ flash-timeout-us = <1835000>;
+ };
+};
--
2.0.5
This patch adds a driver to support the ktd2692 flash LEDs.
ktd2692 can control flash current by ExpressWire interface.
Signed-off-by: Ingi Kim <[email protected]>
---
drivers/leds/Kconfig | 9 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-ktd2692.c | 408 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 418 insertions(+)
create mode 100644 drivers/leds/leds-ktd2692.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 51059bb..86197ef 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -505,6 +505,15 @@ config LEDS_MENF21BMC
This driver can also be built as a module. If so the module
will be called leds-menf21bmc.
+config LEDS_KTD2692
+ tristate "KTD2692 LED flash support"
+ depends on LEDS_CLASS_FLASH && GPIOLIB
+ help
+ This option enables support for KTD2692 LED flash connected
+ through ExpressWire interface.
+
+ Say Y to enable this driver.
+
comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
config LEDS_BLINKM
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index a739ae2..ed5ed79 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o
obj-$(CONFIG_LEDS_SYSCON) += leds-syscon.o
obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o
obj-$(CONFIG_LEDS_MENF21BMC) += leds-menf21bmc.o
+obj-$(CONFIG_LEDS_KTD2692) += leds-ktd2692.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
diff --git a/drivers/leds/leds-ktd2692.c b/drivers/leds/leds-ktd2692.c
new file mode 100644
index 0000000..a9e4862
--- /dev/null
+++ b/drivers/leds/leds-ktd2692.c
@@ -0,0 +1,408 @@
+/*
+ * LED driver : leds-ktd2692.c
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Ingi Kim <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/led-class-flash.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/workqueue.h>
+
+/* Value related the flash mode */
+#define KTD2692_FLASH_MODE_TIMEOUT_LEVELS 8
+#define KTD2692_FLASH_MODE_TIMEOUT_DISABLE 0
+#define KTD2692_FLASH_MODE_TIMEOUT_DEFAULT_US 1049000
+#define KTD2692_FLASH_MODE_TIMEOUT_MAX_US 1835000
+#define KTD2692_FLASH_MODE_CURR_PERCENT(x) (((x) * 16) / 100)
+
+/* Macro for getting offset of flash timeout */
+#define GET_TIMEOUT_OFFSET(timeout, step) ((timeout) / (step))
+
+/* Adjust a multiple of brightness */
+#define KTD2692_BRIGHTNESS_RANGE_255_TO_16(x) (((x) >> 4) & 0x0F)
+#define KTD2692_BRIGHTNESS_RANGE_255_TO_8(x) (((x) >> 5) & 0x0F)
+#define KTD2692_BRIGHTNESS_RANGE_255_TO_4(x) (((x) >> 6) & 0x0F)
+
+/* Base register address */
+#define KTD2692_REG_LVP_BASE 0x00
+#define KTD2692_REG_FLASH_TIMEOUT_BASE 0x20
+#define KTD2692_REG_MIN_CURRENT_SET_BASE 0x40
+#define KTD2692_REG_MOVIE_CURRENT_BASE 0x60
+#define KTD2692_REG_FLASH_CURRENT_BASE 0x80
+#define KTD2692_REG_MODE_BASE 0xA0
+
+/* Set bit coding time for expresswire interface */
+#define KTD2692_TIME_RESET_US 700
+#define KTD2692_TIME_DATA_START_TIME_US 10
+#define KTD2692_TIME_HIGH_END_OF_DATA_US 350
+#define KTD2692_TIME_LOW_END_OF_DATA_US 10
+#define KTD2692_TIME_SHORT_BITSET_US 4
+#define KTD2692_TIME_LONG_BITSET_US 12
+
+/* KTD2692 default length of name */
+#define KTD2692_NAME_LENGTH 20
+
+enum ktd2692_bitset {
+ KTD2692_LOW = 0,
+ KTD2692_HIGH,
+};
+
+/* Movie / Flash Mode Control */
+enum ktd2692_led_mode {
+ KTD2692_MODE_DISABLE = 0, /* default */
+ KTD2692_MODE_MOVIE,
+ KTD2692_MODE_FLASH,
+};
+
+struct ktd2692_context {
+ /* Related LED Flash class device */
+ struct led_classdev_flash fled_cdev;
+
+ struct mutex lock;
+ struct regulator *regulator;
+ struct work_struct work_brightness_set;
+
+ int aux_gpio;
+ int ctrl_gpio;
+
+ enum ktd2692_led_mode mode;
+ enum led_brightness torch_brightness;
+};
+
+static struct ktd2692_context *fled_cdev_to_led(
+ struct led_classdev_flash *fled_cdev)
+{
+ return container_of(fled_cdev, struct ktd2692_context, fled_cdev);
+}
+
+static void ktd2692_expresswire_start(struct ktd2692_context *led)
+{
+ gpio_set_value(led->ctrl_gpio, KTD2692_HIGH);
+ udelay(KTD2692_TIME_DATA_START_TIME_US);
+}
+
+static void ktd2692_expresswire_reset(struct ktd2692_context *led)
+{
+ gpio_set_value(led->ctrl_gpio, KTD2692_LOW);
+ udelay(KTD2692_TIME_RESET_US);
+}
+
+static void ktd2692_expresswire_end(struct ktd2692_context *led)
+{
+ gpio_set_value(led->ctrl_gpio, KTD2692_LOW);
+ udelay(KTD2692_TIME_LOW_END_OF_DATA_US);
+ gpio_set_value(led->ctrl_gpio, KTD2692_HIGH);
+ udelay(KTD2692_TIME_HIGH_END_OF_DATA_US);
+}
+
+static void ktd2692_expresswire_set_bit(struct ktd2692_context *led, bool bit)
+{
+ /*
+ * The Low Bit(0) and High Bit(1) is based on a time detection
+ * algorithm between time low and time high
+ * Time_(L_LB) : Low time of the Low Bit(0)
+ * Time_(H_LB) : High time of the LOW Bit(0)
+ * Time_(L_HB) : Low time of the High Bit(1)
+ * Time_(H_HB) : High time of the High Bit(1)
+ *
+ * It can be simplified to:
+ * Low Bit(0) : 2 * Time_(H_LB) < Time_(L_LB)
+ * High Bit(1) : 2 * Time_(L_HB) < Time_(H_HB)
+ * HIGH ___ ____ _.. _________ ___
+ * |_________| |_.. |____| |__|
+ * LOW <L_LB> <H_LB> <L_HB> <H_HB>
+ * [ Low Bit (0) ] [ High Bit(1) ]
+ */
+ if (bit) {
+ gpio_set_value(led->ctrl_gpio, KTD2692_LOW);
+ udelay(KTD2692_TIME_SHORT_BITSET_US);
+ gpio_set_value(led->ctrl_gpio, KTD2692_HIGH);
+ udelay(KTD2692_TIME_LONG_BITSET_US);
+ } else {
+ gpio_set_value(led->ctrl_gpio, KTD2692_LOW);
+ udelay(KTD2692_TIME_LONG_BITSET_US);
+ gpio_set_value(led->ctrl_gpio, KTD2692_HIGH);
+ udelay(KTD2692_TIME_SHORT_BITSET_US);
+ }
+}
+
+static void ktd2692_expresswire_write(struct ktd2692_context *led, u8 value)
+{
+ int i;
+
+ ktd2692_expresswire_start(led);
+ for (i = 7; i >= 0; i--)
+ ktd2692_expresswire_set_bit(led, value & BIT(i));
+ ktd2692_expresswire_end(led);
+}
+
+static void ktd2692_brightness_set(struct ktd2692_context *led,
+ enum led_brightness brightness)
+{
+ mutex_lock(&led->lock);
+
+ if (brightness == LED_OFF) {
+ led->mode = KTD2692_MODE_DISABLE;
+ gpio_set_value(led->aux_gpio, KTD2692_LOW);
+ } else {
+ ktd2692_expresswire_write(led, KTD2692_REG_MOVIE_CURRENT_BASE |
+ KTD2692_BRIGHTNESS_RANGE_255_TO_8(brightness));
+ led->mode = KTD2692_MODE_MOVIE;
+ }
+
+ ktd2692_expresswire_write(led, led->mode | KTD2692_REG_MODE_BASE);
+ mutex_unlock(&led->lock);
+}
+
+static void ktd2692_brightness_set_work(struct work_struct *work)
+{
+ struct ktd2692_context *led =
+ container_of(work, struct ktd2692_context, work_brightness_set);
+
+ ktd2692_brightness_set(led, led->torch_brightness);
+}
+
+static void ktd2692_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+ struct ktd2692_context *led = fled_cdev_to_led(fled_cdev);
+
+ led->torch_brightness = brightness;
+ schedule_work(&led->work_brightness_set);
+}
+
+static int ktd2692_led_brightness_set_sync(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
+ struct ktd2692_context *led = fled_cdev_to_led(fled_cdev);
+
+ ktd2692_brightness_set(led, brightness);
+
+ return 0;
+}
+
+static int ktd2692_led_flash_strobe_set(struct led_classdev_flash *fled_cdev,
+ bool state)
+{
+ struct ktd2692_context *led = fled_cdev_to_led(fled_cdev);
+ struct led_flash_setting *timeout = &fled_cdev->timeout;
+ u32 flash_tm_reg;
+
+ mutex_lock(&led->lock);
+
+ if (state == 0) {
+ led->mode = KTD2692_MODE_DISABLE;
+ gpio_set_value(led->aux_gpio, KTD2692_LOW);
+ } else {
+ flash_tm_reg = GET_TIMEOUT_OFFSET(timeout->val, timeout->step);
+ ktd2692_expresswire_write(led, flash_tm_reg
+ | KTD2692_REG_FLASH_TIMEOUT_BASE);
+
+ led->mode = KTD2692_MODE_FLASH;
+ gpio_set_value(led->aux_gpio, KTD2692_HIGH);
+ }
+
+ ktd2692_expresswire_write(led, led->mode | KTD2692_REG_MODE_BASE);
+
+ fled_cdev->led_cdev.brightness = LED_OFF;
+ led->mode = KTD2692_MODE_DISABLE;
+
+ mutex_unlock(&led->lock);
+
+ return 0;
+}
+
+static int ktd2692_led_flash_timeout_set(struct led_classdev_flash *fled_cdev,
+ u32 timeout)
+{
+ return 0;
+}
+
+static void ktd2692_init_flash_timeout(u32 flash_timeout_us,
+ struct led_flash_setting *setting)
+{
+ setting->min = KTD2692_FLASH_MODE_TIMEOUT_DISABLE;
+ setting->max = KTD2692_FLASH_MODE_TIMEOUT_MAX_US;
+ setting->step = KTD2692_FLASH_MODE_TIMEOUT_MAX_US
+ / (KTD2692_FLASH_MODE_TIMEOUT_LEVELS - 1);
+ setting->val = flash_timeout_us;
+}
+
+static void ktd2692_setup(struct ktd2692_context *led)
+{
+ led->mode = KTD2692_MODE_DISABLE;
+ ktd2692_expresswire_reset(led);
+ gpio_set_value(led->aux_gpio, KTD2692_LOW);
+
+ ktd2692_expresswire_write(led, KTD2692_FLASH_MODE_CURR_PERCENT(45)
+ | KTD2692_REG_FLASH_CURRENT_BASE);
+}
+
+static int ktd2692_parse_dt(struct ktd2692_context *led, struct device *dev,
+ u32 *flash_timeout_us)
+{
+ struct device_node *np = dev->of_node;
+ struct device_node *child_node;
+ int ret;
+
+ if (!dev->of_node)
+ return -ENXIO;
+
+ led->ctrl_gpio = of_get_named_gpio(np, "ctrl-gpio", 0);
+ if (!gpio_is_valid(led->ctrl_gpio)) {
+ dev_err(dev, "no ctrl-gpio property found\n");
+ return -EINVAL;
+ }
+
+ led->aux_gpio = of_get_named_gpio(np, "aux-gpio", 0);
+ if (!gpio_is_valid(led->aux_gpio)) {
+ dev_err(dev, "no aux-gpio property found\n");
+ return -EINVAL;
+ }
+
+ ret = devm_gpio_request_one(dev, led->ctrl_gpio,
+ GPIOF_OPEN_SOURCE, "ctrl-gpio");
+ if (ret) {
+ dev_err(dev, "failed to request ctrl-gpio %d error %d\n",
+ led->ctrl_gpio, ret);
+ return ret;
+ }
+
+ ret = devm_gpio_request_one(dev, led->aux_gpio,
+ GPIOF_OPEN_SOURCE, "aux-gpio");
+ if (ret) {
+ dev_err(dev, "failed to request aux-gpio %d error %d\n",
+ led->aux_gpio, ret);
+ return ret;
+ }
+
+ child_node = of_get_next_available_child(np, NULL);
+ if (!child_node) {
+ dev_err(dev, "No DT child node found for connected LED.\n");
+ return -EINVAL;
+ }
+
+ led->fled_cdev.led_cdev.name =
+ of_get_property(child_node, "label", NULL) ? : child_node->name;
+
+ ret = of_property_read_u32(child_node,
+ "flash-timeout-us", flash_timeout_us);
+ /* default setting */
+ if (ret)
+ *flash_timeout_us = KTD2692_FLASH_MODE_TIMEOUT_DEFAULT_US;
+
+ return 0;
+}
+
+static const struct led_flash_ops flash_ops = {
+ .strobe_set = ktd2692_led_flash_strobe_set,
+ .timeout_set = ktd2692_led_flash_timeout_set,
+};
+
+static int ktd2692_probe(struct platform_device *pdev)
+{
+ struct ktd2692_context *led;
+ struct led_classdev *led_cdev;
+ struct led_classdev_flash *fled_cdev;
+ struct led_flash_setting flash_timeout;
+ u32 flash_timeout_us;
+ int ret;
+
+ led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
+ if (!led)
+ return -ENOMEM;
+
+ fled_cdev = &led->fled_cdev;
+ led_cdev = &fled_cdev->led_cdev;
+
+ ret = ktd2692_parse_dt(led, &pdev->dev, &flash_timeout_us);
+ if (ret)
+ return ret;
+
+ led->regulator = devm_regulator_get(&pdev->dev, "vin");
+ if (IS_ERR(led->regulator)) {
+ dev_err(&pdev->dev, "regulator get failed\n");
+ return PTR_ERR(led->regulator);
+ }
+
+ ret = regulator_enable(led->regulator);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to enable supply: %d\n", ret);
+ return ret;
+ }
+
+ ktd2692_init_flash_timeout(flash_timeout_us, &flash_timeout);
+
+ fled_cdev->timeout = flash_timeout;
+ fled_cdev->ops = &flash_ops;
+
+ led_cdev->brightness_set = ktd2692_led_brightness_set;
+ led_cdev->brightness_set_sync = ktd2692_led_brightness_set_sync;
+ led_cdev->flags |= LED_CORE_SUSPENDRESUME | LED_DEV_CAP_FLASH;
+
+ mutex_init(&led->lock);
+ INIT_WORK(&led->work_brightness_set, ktd2692_brightness_set_work);
+
+ platform_set_drvdata(pdev, led);
+
+ ret = led_classdev_flash_register(&pdev->dev, fled_cdev);
+ if (ret) {
+ dev_err(&pdev->dev, "can't register LED %s\n", led_cdev->name);
+ mutex_destroy(&led->lock);
+ return ret;
+ }
+
+ ktd2692_setup(led);
+
+ return 0;
+}
+
+static int ktd2692_remove(struct platform_device *pdev)
+{
+ struct ktd2692_context *led = platform_get_drvdata(pdev);
+ int ret;
+
+ led_classdev_flash_unregister(&led->fled_cdev);
+ cancel_work_sync(&led->work_brightness_set);
+
+ ret = regulator_disable(led->regulator);
+ if (ret)
+ dev_err(&pdev->dev, "Failed to disable supply: %d\n", ret);
+
+ mutex_destroy(&led->lock);
+
+ return 0;
+}
+
+static const struct of_device_id ktd2692_match[] = {
+ { .compatible = "kinetic,ktd2692", },
+ { /* sentinel */ },
+};
+
+static struct platform_driver ktd2692_driver = {
+ .driver = {
+ .name = "ktd2692",
+ .of_match_table = ktd2692_match,
+ },
+ .probe = ktd2692_probe,
+ .remove = ktd2692_remove,
+};
+
+module_platform_driver(ktd2692_driver);
+
+MODULE_AUTHOR("Ingi Kim <[email protected]>");
+MODULE_DESCRIPTION("Kinetic KTD2692 LED driver");
+MODULE_LICENSE("GPL v2");
--
2.0.5
On 04/10/2015 12:15 PM, Ingi Kim wrote:
> This patch adds ktd2692 Flash LED driver with LED Flash class
>
> Change in v6:
> - Change goto label to if-else
> - Change DT binding style for LED device binding
>
> Change in v5:
> - Clean up the code
> - Fix help message of Kconfig
> - Fix issue related with regulator and mutex usage
> - Remove tab spaces in bindings
>
> Change in v4:
> - Clean up the code
> - Modify binding documentation of ktd2692
>
> Change in v3:
> - Clean up the code
> - Add aux gpio pin to control Flash LED
>
> Change in v2:
> - Introduction of LED Flash class as Jacek's comment
> - Supplement of binding documentation
> - Rename gpio control pin and remove unused pin
> - Add regulator for the Flash LED
>
> Ingi Kim (3):
> of: Add vendor prefix for Kinetic technologies
> leds: ktd2692: add device tree bindings for ktd2692
> leds: Add ktd2692 flash LED driver
>
> .../devicetree/bindings/leds/leds-ktd2692.txt | 40 ++
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> drivers/leds/Kconfig | 9 +
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-ktd2692.c | 408 +++++++++++++++++++++
> 5 files changed, 459 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt
> create mode 100644 drivers/leds/leds-ktd2692.c
>
Run checkpatch.pl with --strict option on this series..
./scripts/checkpatch.pl --strict 000*
Reported "CHECK: Alignment should match open parenthesis"..
--
Varka Bhadram
Hi Varka,
On 2015년 04월 10일 15:59, Varka Bhadram wrote:
> On 04/10/2015 12:15 PM, Ingi Kim wrote:
>
>> This patch adds ktd2692 Flash LED driver with LED Flash class
>>
>> Change in v6:
>> - Change goto label to if-else
>> - Change DT binding style for LED device binding
>>
>> Change in v5:
>> - Clean up the code
>> - Fix help message of Kconfig
>> - Fix issue related with regulator and mutex usage
>> - Remove tab spaces in bindings
>>
>> Change in v4:
>> - Clean up the code
>> - Modify binding documentation of ktd2692
>>
>> Change in v3:
>> - Clean up the code
>> - Add aux gpio pin to control Flash LED
>>
>> Change in v2:
>> - Introduction of LED Flash class as Jacek's comment
>> - Supplement of binding documentation
>> - Rename gpio control pin and remove unused pin
>> - Add regulator for the Flash LED
>>
>> Ingi Kim (3):
>> of: Add vendor prefix for Kinetic technologies
>> leds: ktd2692: add device tree bindings for ktd2692
>> leds: Add ktd2692 flash LED driver
>>
>> .../devicetree/bindings/leds/leds-ktd2692.txt | 40 ++
>> .../devicetree/bindings/vendor-prefixes.txt | 1 +
>> drivers/leds/Kconfig | 9 +
>> drivers/leds/Makefile | 1 +
>> drivers/leds/leds-ktd2692.c | 408 +++++++++++++++++++++
>> 5 files changed, 459 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt
>> create mode 100644 drivers/leds/leds-ktd2692.c
>>
> Run checkpatch.pl with --strict option on this series..
>
> ./scripts/checkpatch.pl --strict 000*
>
> Reported "CHECK: Alignment should match open parenthesis"..
>
I used checkpatch.pl script but I wasn't aware of this option.
It reveals my mistakes more :)
Thanks
Hi Ingi,
Thanks for the update. Just a few comments below. Let's also wait for the
final agreement on the limit properties, hopefully we have that soon.
On Fri, Apr 10, 2015 at 03:45:59PM +0900, Ingi Kim wrote:
> This patch adds a driver to support the ktd2692 flash LEDs.
> ktd2692 can control flash current by ExpressWire interface.
>
> Signed-off-by: Ingi Kim <[email protected]>
> ---
> drivers/leds/Kconfig | 9 +
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-ktd2692.c | 408 ++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 418 insertions(+)
> create mode 100644 drivers/leds/leds-ktd2692.c
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 51059bb..86197ef 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -505,6 +505,15 @@ config LEDS_MENF21BMC
> This driver can also be built as a module. If so the module
> will be called leds-menf21bmc.
>
> +config LEDS_KTD2692
> + tristate "KTD2692 LED flash support"
> + depends on LEDS_CLASS_FLASH && GPIOLIB
> + help
> + This option enables support for KTD2692 LED flash connected
> + through ExpressWire interface.
> +
> + Say Y to enable this driver.
> +
> comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
>
> config LEDS_BLINKM
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index a739ae2..ed5ed79 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -59,6 +59,7 @@ obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o
> obj-$(CONFIG_LEDS_SYSCON) += leds-syscon.o
> obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o
> obj-$(CONFIG_LEDS_MENF21BMC) += leds-menf21bmc.o
> +obj-$(CONFIG_LEDS_KTD2692) += leds-ktd2692.o
>
> # LED SPI Drivers
> obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
> diff --git a/drivers/leds/leds-ktd2692.c b/drivers/leds/leds-ktd2692.c
> new file mode 100644
> index 0000000..a9e4862
> --- /dev/null
> +++ b/drivers/leds/leds-ktd2692.c
> @@ -0,0 +1,408 @@
> +/*
> + * LED driver : leds-ktd2692.c
> + *
> + * Copyright (C) 2015 Samsung Electronics
> + * Ingi Kim <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/led-class-flash.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of_gpio.h>
Shouldn't this be linux/of.h?
> +#include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/workqueue.h>
> +
> +/* Value related the flash mode */
> +#define KTD2692_FLASH_MODE_TIMEOUT_LEVELS 8
> +#define KTD2692_FLASH_MODE_TIMEOUT_DISABLE 0
> +#define KTD2692_FLASH_MODE_TIMEOUT_DEFAULT_US 1049000
> +#define KTD2692_FLASH_MODE_TIMEOUT_MAX_US 1835000
> +#define KTD2692_FLASH_MODE_CURR_PERCENT(x) (((x) * 16) / 100)
> +
> +/* Macro for getting offset of flash timeout */
> +#define GET_TIMEOUT_OFFSET(timeout, step) ((timeout) / (step))
> +
> +/* Adjust a multiple of brightness */
> +#define KTD2692_BRIGHTNESS_RANGE_255_TO_16(x) (((x) >> 4) & 0x0F)
> +#define KTD2692_BRIGHTNESS_RANGE_255_TO_8(x) (((x) >> 5) & 0x0F)
> +#define KTD2692_BRIGHTNESS_RANGE_255_TO_4(x) (((x) >> 6) & 0x0F)
> +
> +/* Base register address */
> +#define KTD2692_REG_LVP_BASE 0x00
> +#define KTD2692_REG_FLASH_TIMEOUT_BASE 0x20
> +#define KTD2692_REG_MIN_CURRENT_SET_BASE 0x40
> +#define KTD2692_REG_MOVIE_CURRENT_BASE 0x60
> +#define KTD2692_REG_FLASH_CURRENT_BASE 0x80
> +#define KTD2692_REG_MODE_BASE 0xA0
> +
> +/* Set bit coding time for expresswire interface */
> +#define KTD2692_TIME_RESET_US 700
> +#define KTD2692_TIME_DATA_START_TIME_US 10
> +#define KTD2692_TIME_HIGH_END_OF_DATA_US 350
> +#define KTD2692_TIME_LOW_END_OF_DATA_US 10
> +#define KTD2692_TIME_SHORT_BITSET_US 4
> +#define KTD2692_TIME_LONG_BITSET_US 12
> +
> +/* KTD2692 default length of name */
> +#define KTD2692_NAME_LENGTH 20
> +
> +enum ktd2692_bitset {
> + KTD2692_LOW = 0,
> + KTD2692_HIGH,
> +};
> +
> +/* Movie / Flash Mode Control */
> +enum ktd2692_led_mode {
> + KTD2692_MODE_DISABLE = 0, /* default */
> + KTD2692_MODE_MOVIE,
> + KTD2692_MODE_FLASH,
> +};
> +
> +struct ktd2692_context {
> + /* Related LED Flash class device */
> + struct led_classdev_flash fled_cdev;
> +
> + struct mutex lock;
> + struct regulator *regulator;
> + struct work_struct work_brightness_set;
> +
> + int aux_gpio;
> + int ctrl_gpio;
> +
> + enum ktd2692_led_mode mode;
> + enum led_brightness torch_brightness;
> +};
> +
> +static struct ktd2692_context *fled_cdev_to_led(
> + struct led_classdev_flash *fled_cdev)
> +{
> + return container_of(fled_cdev, struct ktd2692_context, fled_cdev);
> +}
> +
> +static void ktd2692_expresswire_start(struct ktd2692_context *led)
> +{
> + gpio_set_value(led->ctrl_gpio, KTD2692_HIGH);
> + udelay(KTD2692_TIME_DATA_START_TIME_US);
> +}
> +
> +static void ktd2692_expresswire_reset(struct ktd2692_context *led)
> +{
> + gpio_set_value(led->ctrl_gpio, KTD2692_LOW);
> + udelay(KTD2692_TIME_RESET_US);
> +}
> +
> +static void ktd2692_expresswire_end(struct ktd2692_context *led)
> +{
> + gpio_set_value(led->ctrl_gpio, KTD2692_LOW);
> + udelay(KTD2692_TIME_LOW_END_OF_DATA_US);
> + gpio_set_value(led->ctrl_gpio, KTD2692_HIGH);
> + udelay(KTD2692_TIME_HIGH_END_OF_DATA_US);
> +}
> +
> +static void ktd2692_expresswire_set_bit(struct ktd2692_context *led, bool bit)
> +{
> + /*
> + * The Low Bit(0) and High Bit(1) is based on a time detection
> + * algorithm between time low and time high
> + * Time_(L_LB) : Low time of the Low Bit(0)
> + * Time_(H_LB) : High time of the LOW Bit(0)
> + * Time_(L_HB) : Low time of the High Bit(1)
> + * Time_(H_HB) : High time of the High Bit(1)
> + *
> + * It can be simplified to:
> + * Low Bit(0) : 2 * Time_(H_LB) < Time_(L_LB)
> + * High Bit(1) : 2 * Time_(L_HB) < Time_(H_HB)
> + * HIGH ___ ____ _.. _________ ___
> + * |_________| |_.. |____| |__|
> + * LOW <L_LB> <H_LB> <L_HB> <H_HB>
> + * [ Low Bit (0) ] [ High Bit(1) ]
> + */
> + if (bit) {
> + gpio_set_value(led->ctrl_gpio, KTD2692_LOW);
> + udelay(KTD2692_TIME_SHORT_BITSET_US);
> + gpio_set_value(led->ctrl_gpio, KTD2692_HIGH);
> + udelay(KTD2692_TIME_LONG_BITSET_US);
> + } else {
> + gpio_set_value(led->ctrl_gpio, KTD2692_LOW);
> + udelay(KTD2692_TIME_LONG_BITSET_US);
> + gpio_set_value(led->ctrl_gpio, KTD2692_HIGH);
> + udelay(KTD2692_TIME_SHORT_BITSET_US);
> + }
> +}
> +
> +static void ktd2692_expresswire_write(struct ktd2692_context *led, u8 value)
> +{
> + int i;
> +
> + ktd2692_expresswire_start(led);
> + for (i = 7; i >= 0; i--)
> + ktd2692_expresswire_set_bit(led, value & BIT(i));
> + ktd2692_expresswire_end(led);
> +}
> +
> +static void ktd2692_brightness_set(struct ktd2692_context *led,
> + enum led_brightness brightness)
> +{
> + mutex_lock(&led->lock);
> +
> + if (brightness == LED_OFF) {
> + led->mode = KTD2692_MODE_DISABLE;
> + gpio_set_value(led->aux_gpio, KTD2692_LOW);
> + } else {
> + ktd2692_expresswire_write(led, KTD2692_REG_MOVIE_CURRENT_BASE |
> + KTD2692_BRIGHTNESS_RANGE_255_TO_8(brightness));
> + led->mode = KTD2692_MODE_MOVIE;
> + }
> +
> + ktd2692_expresswire_write(led, led->mode | KTD2692_REG_MODE_BASE);
> + mutex_unlock(&led->lock);
> +}
> +
> +static void ktd2692_brightness_set_work(struct work_struct *work)
> +{
> + struct ktd2692_context *led =
> + container_of(work, struct ktd2692_context, work_brightness_set);
> +
> + ktd2692_brightness_set(led, led->torch_brightness);
> +}
> +
> +static void ktd2692_led_brightness_set(struct led_classdev *led_cdev,
> + enum led_brightness brightness)
> +{
> + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
> + struct ktd2692_context *led = fled_cdev_to_led(fled_cdev);
> +
> + led->torch_brightness = brightness;
> + schedule_work(&led->work_brightness_set);
> +}
> +
> +static int ktd2692_led_brightness_set_sync(struct led_classdev *led_cdev,
> + enum led_brightness brightness)
> +{
> + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
> + struct ktd2692_context *led = fled_cdev_to_led(fled_cdev);
> +
> + ktd2692_brightness_set(led, brightness);
> +
> + return 0;
> +}
> +
> +static int ktd2692_led_flash_strobe_set(struct led_classdev_flash *fled_cdev,
> + bool state)
> +{
> + struct ktd2692_context *led = fled_cdev_to_led(fled_cdev);
> + struct led_flash_setting *timeout = &fled_cdev->timeout;
> + u32 flash_tm_reg;
> +
> + mutex_lock(&led->lock);
> +
> + if (state == 0) {
> + led->mode = KTD2692_MODE_DISABLE;
> + gpio_set_value(led->aux_gpio, KTD2692_LOW);
> + } else {
> + flash_tm_reg = GET_TIMEOUT_OFFSET(timeout->val, timeout->step);
> + ktd2692_expresswire_write(led, flash_tm_reg
> + | KTD2692_REG_FLASH_TIMEOUT_BASE);
> +
> + led->mode = KTD2692_MODE_FLASH;
> + gpio_set_value(led->aux_gpio, KTD2692_HIGH);
> + }
> +
> + ktd2692_expresswire_write(led, led->mode | KTD2692_REG_MODE_BASE);
> +
> + fled_cdev->led_cdev.brightness = LED_OFF;
> + led->mode = KTD2692_MODE_DISABLE;
> +
> + mutex_unlock(&led->lock);
> +
> + return 0;
> +}
> +
> +static int ktd2692_led_flash_timeout_set(struct led_classdev_flash *fled_cdev,
> + u32 timeout)
> +{
> + return 0;
> +}
> +
> +static void ktd2692_init_flash_timeout(u32 flash_timeout_us,
> + struct led_flash_setting *setting)
> +{
> + setting->min = KTD2692_FLASH_MODE_TIMEOUT_DISABLE;
> + setting->max = KTD2692_FLASH_MODE_TIMEOUT_MAX_US;
> + setting->step = KTD2692_FLASH_MODE_TIMEOUT_MAX_US
> + / (KTD2692_FLASH_MODE_TIMEOUT_LEVELS - 1);
> + setting->val = flash_timeout_us;
> +}
> +
> +static void ktd2692_setup(struct ktd2692_context *led)
> +{
> + led->mode = KTD2692_MODE_DISABLE;
> + ktd2692_expresswire_reset(led);
> + gpio_set_value(led->aux_gpio, KTD2692_LOW);
> +
> + ktd2692_expresswire_write(led, KTD2692_FLASH_MODE_CURR_PERCENT(45)
> + | KTD2692_REG_FLASH_CURRENT_BASE);
> +}
> +
> +static int ktd2692_parse_dt(struct ktd2692_context *led, struct device *dev,
> + u32 *flash_timeout_us)
> +{
> + struct device_node *np = dev->of_node;
> + struct device_node *child_node;
> + int ret;
> +
> + if (!dev->of_node)
> + return -ENXIO;
> +
> + led->ctrl_gpio = of_get_named_gpio(np, "ctrl-gpio", 0);
> + if (!gpio_is_valid(led->ctrl_gpio)) {
> + dev_err(dev, "no ctrl-gpio property found\n");
> + return -EINVAL;
> + }
> +
> + led->aux_gpio = of_get_named_gpio(np, "aux-gpio", 0);
> + if (!gpio_is_valid(led->aux_gpio)) {
> + dev_err(dev, "no aux-gpio property found\n");
> + return -EINVAL;
> + }
> +
> + ret = devm_gpio_request_one(dev, led->ctrl_gpio,
> + GPIOF_OPEN_SOURCE, "ctrl-gpio");
I think you could simply use devm_gpio_get(), and start using the new API
instead. It'd save quite a few lines of code, too.
> + if (ret) {
> + dev_err(dev, "failed to request ctrl-gpio %d error %d\n",
> + led->ctrl_gpio, ret);
> + return ret;
> + }
> +
> + ret = devm_gpio_request_one(dev, led->aux_gpio,
> + GPIOF_OPEN_SOURCE, "aux-gpio");
> + if (ret) {
> + dev_err(dev, "failed to request aux-gpio %d error %d\n",
> + led->aux_gpio, ret);
> + return ret;
> + }
> +
> + child_node = of_get_next_available_child(np, NULL);
> + if (!child_node) {
> + dev_err(dev, "No DT child node found for connected LED.\n");
> + return -EINVAL;
> + }
> +
> + led->fled_cdev.led_cdev.name =
> + of_get_property(child_node, "label", NULL) ? : child_node->name;
> +
> + ret = of_property_read_u32(child_node,
> + "flash-timeout-us", flash_timeout_us);
You should do of_node_put(child_node) once you no longer need it.
> + /* default setting */
> + if (ret)
> + *flash_timeout_us = KTD2692_FLASH_MODE_TIMEOUT_DEFAULT_US;
> +
> + return 0;
> +}
> +
> +static const struct led_flash_ops flash_ops = {
> + .strobe_set = ktd2692_led_flash_strobe_set,
> + .timeout_set = ktd2692_led_flash_timeout_set,
> +};
> +
> +static int ktd2692_probe(struct platform_device *pdev)
> +{
> + struct ktd2692_context *led;
> + struct led_classdev *led_cdev;
> + struct led_classdev_flash *fled_cdev;
> + struct led_flash_setting flash_timeout;
> + u32 flash_timeout_us;
> + int ret;
> +
> + led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
> + if (!led)
> + return -ENOMEM;
> +
> + fled_cdev = &led->fled_cdev;
> + led_cdev = &fled_cdev->led_cdev;
> +
> + ret = ktd2692_parse_dt(led, &pdev->dev, &flash_timeout_us);
> + if (ret)
> + return ret;
> +
> + led->regulator = devm_regulator_get(&pdev->dev, "vin");
> + if (IS_ERR(led->regulator)) {
> + dev_err(&pdev->dev, "regulator get failed\n");
> + return PTR_ERR(led->regulator);
> + }
> +
> + ret = regulator_enable(led->regulator);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to enable supply: %d\n", ret);
> + return ret;
> + }
> +
> + ktd2692_init_flash_timeout(flash_timeout_us, &flash_timeout);
> +
> + fled_cdev->timeout = flash_timeout;
> + fled_cdev->ops = &flash_ops;
> +
> + led_cdev->brightness_set = ktd2692_led_brightness_set;
> + led_cdev->brightness_set_sync = ktd2692_led_brightness_set_sync;
> + led_cdev->flags |= LED_CORE_SUSPENDRESUME | LED_DEV_CAP_FLASH;
> +
> + mutex_init(&led->lock);
> + INIT_WORK(&led->work_brightness_set, ktd2692_brightness_set_work);
> +
> + platform_set_drvdata(pdev, led);
> +
> + ret = led_classdev_flash_register(&pdev->dev, fled_cdev);
> + if (ret) {
> + dev_err(&pdev->dev, "can't register LED %s\n", led_cdev->name);
> + mutex_destroy(&led->lock);
> + return ret;
> + }
> +
> + ktd2692_setup(led);
> +
> + return 0;
> +}
> +
> +static int ktd2692_remove(struct platform_device *pdev)
> +{
> + struct ktd2692_context *led = platform_get_drvdata(pdev);
> + int ret;
> +
> + led_classdev_flash_unregister(&led->fled_cdev);
> + cancel_work_sync(&led->work_brightness_set);
> +
> + ret = regulator_disable(led->regulator);
> + if (ret)
> + dev_err(&pdev->dev, "Failed to disable supply: %d\n", ret);
> +
> + mutex_destroy(&led->lock);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id ktd2692_match[] = {
> + { .compatible = "kinetic,ktd2692", },
> + { /* sentinel */ },
> +};
> +
> +static struct platform_driver ktd2692_driver = {
> + .driver = {
> + .name = "ktd2692",
> + .of_match_table = ktd2692_match,
> + },
> + .probe = ktd2692_probe,
> + .remove = ktd2692_remove,
> +};
> +
> +module_platform_driver(ktd2692_driver);
> +
> +MODULE_AUTHOR("Ingi Kim <[email protected]>");
> +MODULE_DESCRIPTION("Kinetic KTD2692 LED driver");
> +MODULE_LICENSE("GPL v2");
--
Kind regards,
Sakari Ailus
e-mail: [email protected] XMPP: [email protected]
Hi Sakari,
Thanks for the review.
I'm also anticipated decision for flash properties.
On 2015년 04월 10일 17:11, Sakari Ailus wrote:
> Hi Ingi,
>
> Thanks for the update. Just a few comments below. Let's also wait for the
> final agreement on the limit properties, hopefully we have that soon.
>
> On Fri, Apr 10, 2015 at 03:45:59PM +0900, Ingi Kim wrote:
>> This patch adds a driver to support the ktd2692 flash LEDs.
>> ktd2692 can control flash current by ExpressWire interface.
>>
>> Signed-off-by: Ingi Kim <[email protected]>
>> ---
>> drivers/leds/Kconfig | 9 +
>> drivers/leds/Makefile | 1 +
>> drivers/leds/leds-ktd2692.c | 408 ++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 418 insertions(+)
>> create mode 100644 drivers/leds/leds-ktd2692.c
>>
>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>> index 51059bb..86197ef 100644
>> --- a/drivers/leds/Kconfig
>> +++ b/drivers/leds/Kconfig
>> @@ -505,6 +505,15 @@ config LEDS_MENF21BMC
>> This driver can also be built as a module. If so the module
>> will be called leds-menf21bmc.
>>
>> +config LEDS_KTD2692
>> + tristate "KTD2692 LED flash support"
>> + depends on LEDS_CLASS_FLASH && GPIOLIB
>> + help
>> + This option enables support for KTD2692 LED flash connected
>> + through ExpressWire interface.
>> +
>> + Say Y to enable this driver.
>> +
>> comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
>>
>> config LEDS_BLINKM
>> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
>> index a739ae2..ed5ed79 100644
>> --- a/drivers/leds/Makefile
>> +++ b/drivers/leds/Makefile
>> @@ -59,6 +59,7 @@ obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o
>> obj-$(CONFIG_LEDS_SYSCON) += leds-syscon.o
>> obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o
>> obj-$(CONFIG_LEDS_MENF21BMC) += leds-menf21bmc.o
>> +obj-$(CONFIG_LEDS_KTD2692) += leds-ktd2692.o
>>
>> # LED SPI Drivers
>> obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
>> diff --git a/drivers/leds/leds-ktd2692.c b/drivers/leds/leds-ktd2692.c
>> new file mode 100644
>> index 0000000..a9e4862
>> --- /dev/null
>> +++ b/drivers/leds/leds-ktd2692.c
>> @@ -0,0 +1,408 @@
>> +/*
>> + * LED driver : leds-ktd2692.c
>> + *
>> + * Copyright (C) 2015 Samsung Electronics
>> + * Ingi Kim <[email protected]>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/err.h>
>> +#include <linux/led-class-flash.h>
>> +#include <linux/module.h>
>> +#include <linux/mutex.h>
>> +#include <linux/of_gpio.h>
>
> Shouldn't this be linux/of.h?
>
I think it is enough to include of_gpio
because it includes linux/of and linux/gpio
but I should change for using new gpio APIs
>> +#include <linux/platform_device.h>
>> +#include <linux/regulator/consumer.h>
>> +#include <linux/workqueue.h>
>> +
>> +/* Value related the flash mode */
>> +#define KTD2692_FLASH_MODE_TIMEOUT_LEVELS 8
>> +#define KTD2692_FLASH_MODE_TIMEOUT_DISABLE 0
>> +#define KTD2692_FLASH_MODE_TIMEOUT_DEFAULT_US 1049000
>> +#define KTD2692_FLASH_MODE_TIMEOUT_MAX_US 1835000
>> +#define KTD2692_FLASH_MODE_CURR_PERCENT(x) (((x) * 16) / 100)
>> +
>> +/* Macro for getting offset of flash timeout */
>> +#define GET_TIMEOUT_OFFSET(timeout, step) ((timeout) / (step))
>> +
>> +/* Adjust a multiple of brightness */
>> +#define KTD2692_BRIGHTNESS_RANGE_255_TO_16(x) (((x) >> 4) & 0x0F)
>> +#define KTD2692_BRIGHTNESS_RANGE_255_TO_8(x) (((x) >> 5) & 0x0F)
>> +#define KTD2692_BRIGHTNESS_RANGE_255_TO_4(x) (((x) >> 6) & 0x0F)
>> +
>> +/* Base register address */
>> +#define KTD2692_REG_LVP_BASE 0x00
>> +#define KTD2692_REG_FLASH_TIMEOUT_BASE 0x20
>> +#define KTD2692_REG_MIN_CURRENT_SET_BASE 0x40
>> +#define KTD2692_REG_MOVIE_CURRENT_BASE 0x60
>> +#define KTD2692_REG_FLASH_CURRENT_BASE 0x80
>> +#define KTD2692_REG_MODE_BASE 0xA0
>> +
>> +/* Set bit coding time for expresswire interface */
>> +#define KTD2692_TIME_RESET_US 700
>> +#define KTD2692_TIME_DATA_START_TIME_US 10
>> +#define KTD2692_TIME_HIGH_END_OF_DATA_US 350
>> +#define KTD2692_TIME_LOW_END_OF_DATA_US 10
>> +#define KTD2692_TIME_SHORT_BITSET_US 4
>> +#define KTD2692_TIME_LONG_BITSET_US 12
>> +
>> +/* KTD2692 default length of name */
>> +#define KTD2692_NAME_LENGTH 20
>> +
>> +enum ktd2692_bitset {
>> + KTD2692_LOW = 0,
>> + KTD2692_HIGH,
>> +};
>> +
>> +/* Movie / Flash Mode Control */
>> +enum ktd2692_led_mode {
>> + KTD2692_MODE_DISABLE = 0, /* default */
>> + KTD2692_MODE_MOVIE,
>> + KTD2692_MODE_FLASH,
>> +};
>> +
>> +struct ktd2692_context {
>> + /* Related LED Flash class device */
>> + struct led_classdev_flash fled_cdev;
>> +
>> + struct mutex lock;
>> + struct regulator *regulator;
>> + struct work_struct work_brightness_set;
>> +
>> + int aux_gpio;
>> + int ctrl_gpio;
>> +
>> + enum ktd2692_led_mode mode;
>> + enum led_brightness torch_brightness;
>> +};
>> +
>> +static struct ktd2692_context *fled_cdev_to_led(
>> + struct led_classdev_flash *fled_cdev)
>> +{
>> + return container_of(fled_cdev, struct ktd2692_context, fled_cdev);
>> +}
>> +
>> +static void ktd2692_expresswire_start(struct ktd2692_context *led)
>> +{
>> + gpio_set_value(led->ctrl_gpio, KTD2692_HIGH);
>> + udelay(KTD2692_TIME_DATA_START_TIME_US);
>> +}
>> +
>> +static void ktd2692_expresswire_reset(struct ktd2692_context *led)
>> +{
>> + gpio_set_value(led->ctrl_gpio, KTD2692_LOW);
>> + udelay(KTD2692_TIME_RESET_US);
>> +}
>> +
>> +static void ktd2692_expresswire_end(struct ktd2692_context *led)
>> +{
>> + gpio_set_value(led->ctrl_gpio, KTD2692_LOW);
>> + udelay(KTD2692_TIME_LOW_END_OF_DATA_US);
>> + gpio_set_value(led->ctrl_gpio, KTD2692_HIGH);
>> + udelay(KTD2692_TIME_HIGH_END_OF_DATA_US);
>> +}
>> +
>> +static void ktd2692_expresswire_set_bit(struct ktd2692_context *led, bool bit)
>> +{
>> + /*
>> + * The Low Bit(0) and High Bit(1) is based on a time detection
>> + * algorithm between time low and time high
>> + * Time_(L_LB) : Low time of the Low Bit(0)
>> + * Time_(H_LB) : High time of the LOW Bit(0)
>> + * Time_(L_HB) : Low time of the High Bit(1)
>> + * Time_(H_HB) : High time of the High Bit(1)
>> + *
>> + * It can be simplified to:
>> + * Low Bit(0) : 2 * Time_(H_LB) < Time_(L_LB)
>> + * High Bit(1) : 2 * Time_(L_HB) < Time_(H_HB)
>> + * HIGH ___ ____ _.. _________ ___
>> + * |_________| |_.. |____| |__|
>> + * LOW <L_LB> <H_LB> <L_HB> <H_HB>
>> + * [ Low Bit (0) ] [ High Bit(1) ]
>> + */
>> + if (bit) {
>> + gpio_set_value(led->ctrl_gpio, KTD2692_LOW);
>> + udelay(KTD2692_TIME_SHORT_BITSET_US);
>> + gpio_set_value(led->ctrl_gpio, KTD2692_HIGH);
>> + udelay(KTD2692_TIME_LONG_BITSET_US);
>> + } else {
>> + gpio_set_value(led->ctrl_gpio, KTD2692_LOW);
>> + udelay(KTD2692_TIME_LONG_BITSET_US);
>> + gpio_set_value(led->ctrl_gpio, KTD2692_HIGH);
>> + udelay(KTD2692_TIME_SHORT_BITSET_US);
>> + }
>> +}
>> +
>> +static void ktd2692_expresswire_write(struct ktd2692_context *led, u8 value)
>> +{
>> + int i;
>> +
>> + ktd2692_expresswire_start(led);
>> + for (i = 7; i >= 0; i--)
>> + ktd2692_expresswire_set_bit(led, value & BIT(i));
>> + ktd2692_expresswire_end(led);
>> +}
>> +
>> +static void ktd2692_brightness_set(struct ktd2692_context *led,
>> + enum led_brightness brightness)
>> +{
>> + mutex_lock(&led->lock);
>> +
>> + if (brightness == LED_OFF) {
>> + led->mode = KTD2692_MODE_DISABLE;
>> + gpio_set_value(led->aux_gpio, KTD2692_LOW);
>> + } else {
>> + ktd2692_expresswire_write(led, KTD2692_REG_MOVIE_CURRENT_BASE |
>> + KTD2692_BRIGHTNESS_RANGE_255_TO_8(brightness));
>> + led->mode = KTD2692_MODE_MOVIE;
>> + }
>> +
>> + ktd2692_expresswire_write(led, led->mode | KTD2692_REG_MODE_BASE);
>> + mutex_unlock(&led->lock);
>> +}
>> +
>> +static void ktd2692_brightness_set_work(struct work_struct *work)
>> +{
>> + struct ktd2692_context *led =
>> + container_of(work, struct ktd2692_context, work_brightness_set);
>> +
>> + ktd2692_brightness_set(led, led->torch_brightness);
>> +}
>> +
>> +static void ktd2692_led_brightness_set(struct led_classdev *led_cdev,
>> + enum led_brightness brightness)
>> +{
>> + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
>> + struct ktd2692_context *led = fled_cdev_to_led(fled_cdev);
>> +
>> + led->torch_brightness = brightness;
>> + schedule_work(&led->work_brightness_set);
>> +}
>> +
>> +static int ktd2692_led_brightness_set_sync(struct led_classdev *led_cdev,
>> + enum led_brightness brightness)
>> +{
>> + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
>> + struct ktd2692_context *led = fled_cdev_to_led(fled_cdev);
>> +
>> + ktd2692_brightness_set(led, brightness);
>> +
>> + return 0;
>> +}
>> +
>> +static int ktd2692_led_flash_strobe_set(struct led_classdev_flash *fled_cdev,
>> + bool state)
>> +{
>> + struct ktd2692_context *led = fled_cdev_to_led(fled_cdev);
>> + struct led_flash_setting *timeout = &fled_cdev->timeout;
>> + u32 flash_tm_reg;
>> +
>> + mutex_lock(&led->lock);
>> +
>> + if (state == 0) {
>> + led->mode = KTD2692_MODE_DISABLE;
>> + gpio_set_value(led->aux_gpio, KTD2692_LOW);
>> + } else {
>> + flash_tm_reg = GET_TIMEOUT_OFFSET(timeout->val, timeout->step);
>> + ktd2692_expresswire_write(led, flash_tm_reg
>> + | KTD2692_REG_FLASH_TIMEOUT_BASE);
>> +
>> + led->mode = KTD2692_MODE_FLASH;
>> + gpio_set_value(led->aux_gpio, KTD2692_HIGH);
>> + }
>> +
>> + ktd2692_expresswire_write(led, led->mode | KTD2692_REG_MODE_BASE);
>> +
>> + fled_cdev->led_cdev.brightness = LED_OFF;
>> + led->mode = KTD2692_MODE_DISABLE;
>> +
>> + mutex_unlock(&led->lock);
>> +
>> + return 0;
>> +}
>> +
>> +static int ktd2692_led_flash_timeout_set(struct led_classdev_flash *fled_cdev,
>> + u32 timeout)
>> +{
>> + return 0;
>> +}
>> +
>> +static void ktd2692_init_flash_timeout(u32 flash_timeout_us,
>> + struct led_flash_setting *setting)
>> +{
>> + setting->min = KTD2692_FLASH_MODE_TIMEOUT_DISABLE;
>> + setting->max = KTD2692_FLASH_MODE_TIMEOUT_MAX_US;
>> + setting->step = KTD2692_FLASH_MODE_TIMEOUT_MAX_US
>> + / (KTD2692_FLASH_MODE_TIMEOUT_LEVELS - 1);
>> + setting->val = flash_timeout_us;
>> +}
>> +
>> +static void ktd2692_setup(struct ktd2692_context *led)
>> +{
>> + led->mode = KTD2692_MODE_DISABLE;
>> + ktd2692_expresswire_reset(led);
>> + gpio_set_value(led->aux_gpio, KTD2692_LOW);
>> +
>> + ktd2692_expresswire_write(led, KTD2692_FLASH_MODE_CURR_PERCENT(45)
>> + | KTD2692_REG_FLASH_CURRENT_BASE);
>> +}
>> +
>> +static int ktd2692_parse_dt(struct ktd2692_context *led, struct device *dev,
>> + u32 *flash_timeout_us)
>> +{
>> + struct device_node *np = dev->of_node;
>> + struct device_node *child_node;
>> + int ret;
>> +
>> + if (!dev->of_node)
>> + return -ENXIO;
>> +
>> + led->ctrl_gpio = of_get_named_gpio(np, "ctrl-gpio", 0);
>> + if (!gpio_is_valid(led->ctrl_gpio)) {
>> + dev_err(dev, "no ctrl-gpio property found\n");
>> + return -EINVAL;
>> + }
>> +
>> + led->aux_gpio = of_get_named_gpio(np, "aux-gpio", 0);
>> + if (!gpio_is_valid(led->aux_gpio)) {
>> + dev_err(dev, "no aux-gpio property found\n");
>> + return -EINVAL;
>> + }
>> +
>> + ret = devm_gpio_request_one(dev, led->ctrl_gpio,
>> + GPIOF_OPEN_SOURCE, "ctrl-gpio");
>
> I think you could simply use devm_gpio_get(), and start using the new API
> instead. It'd save quite a few lines of code, too.
>
did you mean devm_gpiod_get()
Ok, I'll check it
>> + if (ret) {
>> + dev_err(dev, "failed to request ctrl-gpio %d error %d\n",
>> + led->ctrl_gpio, ret);
>> + return ret;
>> + }
>> +
>> + ret = devm_gpio_request_one(dev, led->aux_gpio,
>> + GPIOF_OPEN_SOURCE, "aux-gpio");
>> + if (ret) {
>> + dev_err(dev, "failed to request aux-gpio %d error %d\n",
>> + led->aux_gpio, ret);
>> + return ret;
>> + }
>> +
>> + child_node = of_get_next_available_child(np, NULL);
>> + if (!child_node) {
>> + dev_err(dev, "No DT child node found for connected LED.\n");
>> + return -EINVAL;
>> + }
>> +
>> + led->fled_cdev.led_cdev.name =
>> + of_get_property(child_node, "label", NULL) ? : child_node->name;
>> +
>> + ret = of_property_read_u32(child_node,
>> + "flash-timeout-us", flash_timeout_us);
>
> You should do of_node_put(child_node) once you no longer need it.
>
Ok, I'll check it
Thanks for the notification of other APIs :)
>> + /* default setting */
>> + if (ret)
>> + *flash_timeout_us = KTD2692_FLASH_MODE_TIMEOUT_DEFAULT_US;
>> +
>> + return 0;
>> +}
>> +
>> +static const struct led_flash_ops flash_ops = {
>> + .strobe_set = ktd2692_led_flash_strobe_set,
>> + .timeout_set = ktd2692_led_flash_timeout_set,
>> +};
>> +
>> +static int ktd2692_probe(struct platform_device *pdev)
>> +{
>> + struct ktd2692_context *led;
>> + struct led_classdev *led_cdev;
>> + struct led_classdev_flash *fled_cdev;
>> + struct led_flash_setting flash_timeout;
>> + u32 flash_timeout_us;
>> + int ret;
>> +
>> + led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
>> + if (!led)
>> + return -ENOMEM;
>> +
>> + fled_cdev = &led->fled_cdev;
>> + led_cdev = &fled_cdev->led_cdev;
>> +
>> + ret = ktd2692_parse_dt(led, &pdev->dev, &flash_timeout_us);
>> + if (ret)
>> + return ret;
>> +
>> + led->regulator = devm_regulator_get(&pdev->dev, "vin");
>> + if (IS_ERR(led->regulator)) {
>> + dev_err(&pdev->dev, "regulator get failed\n");
>> + return PTR_ERR(led->regulator);
>> + }
>> +
>> + ret = regulator_enable(led->regulator);
>> + if (ret) {
>> + dev_err(&pdev->dev, "Failed to enable supply: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ktd2692_init_flash_timeout(flash_timeout_us, &flash_timeout);
>> +
>> + fled_cdev->timeout = flash_timeout;
>> + fled_cdev->ops = &flash_ops;
>> +
>> + led_cdev->brightness_set = ktd2692_led_brightness_set;
>> + led_cdev->brightness_set_sync = ktd2692_led_brightness_set_sync;
>> + led_cdev->flags |= LED_CORE_SUSPENDRESUME | LED_DEV_CAP_FLASH;
>> +
>> + mutex_init(&led->lock);
>> + INIT_WORK(&led->work_brightness_set, ktd2692_brightness_set_work);
>> +
>> + platform_set_drvdata(pdev, led);
>> +
>> + ret = led_classdev_flash_register(&pdev->dev, fled_cdev);
>> + if (ret) {
>> + dev_err(&pdev->dev, "can't register LED %s\n", led_cdev->name);
>> + mutex_destroy(&led->lock);
>> + return ret;
>> + }
>> +
>> + ktd2692_setup(led);
>> +
>> + return 0;
>> +}
>> +
>> +static int ktd2692_remove(struct platform_device *pdev)
>> +{
>> + struct ktd2692_context *led = platform_get_drvdata(pdev);
>> + int ret;
>> +
>> + led_classdev_flash_unregister(&led->fled_cdev);
>> + cancel_work_sync(&led->work_brightness_set);
>> +
>> + ret = regulator_disable(led->regulator);
>> + if (ret)
>> + dev_err(&pdev->dev, "Failed to disable supply: %d\n", ret);
>> +
>> + mutex_destroy(&led->lock);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id ktd2692_match[] = {
>> + { .compatible = "kinetic,ktd2692", },
>> + { /* sentinel */ },
>> +};
>> +
>> +static struct platform_driver ktd2692_driver = {
>> + .driver = {
>> + .name = "ktd2692",
>> + .of_match_table = ktd2692_match,
>> + },
>> + .probe = ktd2692_probe,
>> + .remove = ktd2692_remove,
>> +};
>> +
>> +module_platform_driver(ktd2692_driver);
>> +
>> +MODULE_AUTHOR("Ingi Kim <[email protected]>");
>> +MODULE_DESCRIPTION("Kinetic KTD2692 LED driver");
>> +MODULE_LICENSE("GPL v2");
>
Hi Ingi,
On Fri, Apr 10, 2015 at 05:45:30PM +0900, Ingi Kim wrote:
...
> >> + ret = devm_gpio_request_one(dev, led->ctrl_gpio,
> >> + GPIOF_OPEN_SOURCE, "ctrl-gpio");
> >
> > I think you could simply use devm_gpio_get(), and start using the new API
> > instead. It'd save quite a few lines of code, too.
> >
>
> did you mean devm_gpiod_get()
> Ok, I'll check it
Yes, that's what I meant.
--
Regards,
Sakari Ailus
e-mail: [email protected] XMPP: [email protected]