Update FALLOC_FL_INSERT_RANGE flag in fallocate.
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Ashish Sangwan <[email protected]>
---
man2/fallocate.2 | 89 ++++++++++++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 84 insertions(+), 5 deletions(-)
diff --git a/man2/fallocate.2 b/man2/fallocate.2
index 0cc1a00..0d31027 100644
--- a/man2/fallocate.2
+++ b/man2/fallocate.2
@@ -228,6 +228,59 @@ ext4, for extent-based files (since Linux 3.15)
.IP *
SMB3 (since Linux 3.17)
.\" commit 30175628bf7f521e9ee31ac98fa6d6fe7441a556
+.SS Increasing file space
+flag (available since Linux 4.1)
+.\" commit dd46c787788d5bf5b974729d43e4c405814a4c7d
+Specifying the
+.BR FALLOC_FL_INSERT_RANGE
+flag in
+.I mode
+will increase the file space by inserting a hole within the file size without
+overwriting any existing data.
+The hole will start at
+.I offset
+and continue for
+.I len
+bytes.
+For inserting hole inside file, the contents of the file starting at
+.I offset
+will be shifted towards right by
+.I len
+bytes.
+Inserting a hole inside the file will increase the file size by
+.I len
+bytes.
+
+This mode has the same limitation as
+.BR FALLOC_FL_COLLAPSE_RANGE
+regarding the
+granularity of the operation.
+If the granularity requirements are not met,
+.BR fallocate ()
+will fail with the error
+.BR EINVAL.
+If the
+.I offset
+overlaps with end of file OR if it is greater than end of file, an error is
+returned.
+For such type of operations, i.e. inserting a hole at the end of file,
+.BR ftruncate(2)
+should be used.
+In case
+.IR offset + len
+exceeds the maximum file size, errno will be set to
+.B EFBIG.
+
+No other flags may be specified in
+.IR mode
+in conjunction with
+.BR FALLOC_FL_INSERT_RANGE .
+
+As of Linux 4.1,
+.B FALLOC_FL_INSERT_RANGE
+is supported by
+XFS.
+.\" commit a904b1ca5751faf5ece8600e18cd3b674afcca1b
.SH RETURN VALUE
On success,
.BR fallocate ()
@@ -245,6 +298,12 @@ is not a valid file descriptor, or is not opened for writing.
.IR offset + len
exceeds the maximum file size.
.TP
+.B EFBIG
+.I mode
+is
+.BR FALLOC_FL_INSERT_RANGE ,
+the current file size+len exceeds the maximum file size.
+.TP
.B EINTR
A signal was caught during execution.
.TP
@@ -273,7 +332,17 @@ reaches or passes the end of the file.
.B EINVAL
.I mode
is
-.BR FALLOC_FL_COLLAPSE_RANGE ,
+.BR FALLOC_FL_INSERT_RANGE
+and the range specified by
+.I offset
+reaches or passes the end of the file.
+.TP
+.B EINVAL
+.I mode
+is
+.BR FALLOC_FL_COLLAPSE_RANGE
+or
+.BR FALLOC_FL_INSERT_RANGE ,
but either
.I offset
or
@@ -282,18 +351,24 @@ is not a multiple of the filesystem block size.
.TP
.B EINVAL
.I mode
-contains both
+contains either of
.B FALLOC_FL_COLLAPSE_RANGE
+or
+.B FALLOC_FL_INSERT_RANGE
and other flags;
no other flags are permitted with
-.BR FALLOC_FL_COLLAPSE_RANGE .
+.BR FALLOC_FL_COLLAPSE_RANGE
+or
+.BR FALLOC_FL_INSERT_RANGE .
.TP
.B EINVAL
.I mode
is
.BR FALLOC_FL_COLLAPSE_RANGE
or
-.BR FALLOC_FL_ZERO_RANGE ,
+.BR FALLOC_FL_ZERO_RANGE
+or
+.BR FALLOC_FL_INSERT_RANGE ,
but the file referred to by
.I fd
is not a regular file.
@@ -345,6 +420,8 @@ specifies
.BR FALLOC_FL_PUNCH_HOLE
or
.BR FALLOC_FL_COLLAPSE_RANGE
+or
+.BR FALLOC_FL_INSERT_RANGE
and
the file referred to by
.I fd
@@ -363,7 +440,9 @@ refers to a pipe or FIFO.
.B ETXTBSY
.I mode
specifies
-.BR FALLOC_FL_COLLAPSE_RANGE ,
+.BR FALLOC_FL_COLLAPSE_RANGE
+or
+.BR FALLOC_FL_INSERT_RANGE ,
but the file referred to by
.IR fd
is currently being executed.
--
1.8.5.5
Hello Namjae Jeon,
Thanks for the revised patch. I have a question below:
On 05/07/2015 07:15 AM, Namjae Jeon wrote:
> Update FALLOC_FL_INSERT_RANGE flag in fallocate.
>
> Signed-off-by: Namjae Jeon <[email protected]>
> Signed-off-by: Ashish Sangwan <[email protected]>
> ---
> man2/fallocate.2 | 89 ++++++++++++++++++++++++++++++++++++++++++++++++++++----
> 1 file changed, 84 insertions(+), 5 deletions(-)
>
> diff --git a/man2/fallocate.2 b/man2/fallocate.2
> index 0cc1a00..0d31027 100644
> --- a/man2/fallocate.2
> +++ b/man2/fallocate.2
> @@ -228,6 +228,59 @@ ext4, for extent-based files (since Linux 3.15)
> .IP *
> SMB3 (since Linux 3.17)
> .\" commit 30175628bf7f521e9ee31ac98fa6d6fe7441a556
> +.SS Increasing file space
> +flag (available since Linux 4.1)
> +.\" commit dd46c787788d5bf5b974729d43e4c405814a4c7d
> +Specifying the
> +.BR FALLOC_FL_INSERT_RANGE
> +flag in
> +.I mode
> +will increase the file space by inserting a hole within the file size without
> +overwriting any existing data.
> +The hole will start at
> +.I offset
> +and continue for
> +.I len
> +bytes.
> +For inserting hole inside file, the contents of the file starting at
> +.I offset
> +will be shifted towards right by
> +.I len
> +bytes.
> +Inserting a hole inside the file will increase the file size by
> +.I len
> +bytes.
> +
> +This mode has the same limitation as
> +.BR FALLOC_FL_COLLAPSE_RANGE
> +regarding the
> +granularity of the operation.
> +If the granularity requirements are not met,
> +.BR fallocate ()
> +will fail with the error
> +.BR EINVAL.
> +If the
> +.I offset
> +overlaps with end of file OR if it is greater than end of file, an error is
Could that last line not be simplified to
if the offset is greater than or equal to the end of file
?
Thanks,
Michael
--
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/
> Hello Namjae Jeon,
Hi Michael,
>
> Thanks for the revised patch. I have a question below:
>
> On 05/07/2015 07:15 AM, Namjae Jeon wrote:
> > Update FALLOC_FL_INSERT_RANGE flag in fallocate.
> >
> > Signed-off-by: Namjae Jeon <[email protected]>
> > Signed-off-by: Ashish Sangwan <[email protected]>
> > ---
> > man2/fallocate.2 | 89 ++++++++++++++++++++++++++++++++++++++++++++++++++++----
> > 1 file changed, 84 insertions(+), 5 deletions(-)
> >
> > diff --git a/man2/fallocate.2 b/man2/fallocate.2
> > index 0cc1a00..0d31027 100644
> > --- a/man2/fallocate.2
> > +++ b/man2/fallocate.2
> > @@ -228,6 +228,59 @@ ext4, for extent-based files (since Linux 3.15)
> > .IP *
> > SMB3 (since Linux 3.17)
> > .\" commit 30175628bf7f521e9ee31ac98fa6d6fe7441a556
> > +.SS Increasing file space
> > +flag (available since Linux 4.1)
> > +.\" commit dd46c787788d5bf5b974729d43e4c405814a4c7d
> > +Specifying the
> > +.BR FALLOC_FL_INSERT_RANGE
> > +flag in
> > +.I mode
> > +will increase the file space by inserting a hole within the file size without
> > +overwriting any existing data.
> > +The hole will start at
> > +.I offset
> > +and continue for
> > +.I len
> > +bytes.
> > +For inserting hole inside file, the contents of the file starting at
> > +.I offset
> > +will be shifted towards right by
> > +.I len
> > +bytes.
> > +Inserting a hole inside the file will increase the file size by
> > +.I len
> > +bytes.
> > +
> > +This mode has the same limitation as
> > +.BR FALLOC_FL_COLLAPSE_RANGE
> > +regarding the
> > +granularity of the operation.
> > +If the granularity requirements are not met,
> > +.BR fallocate ()
> > +will fail with the error
> > +.BR EINVAL.
> > +If the
> > +.I offset
> > +overlaps with end of file OR if it is greater than end of file, an error is
>
>
> Could that last line not be simplified to
>
> if the offset is greater than or equal to the end of file
>
> ?
Yes, Looks good :)
Thanks!!
>
> Thanks,
>
> Michael
>
>
> --
> Michael Kerrisk
> Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
> Linux/UNIX System Programming Training: http://man7.org/training/