2015-11-25 09:50:43

by Xinwei Kong

Subject: [PATCH 1/1] arm64: dts: add all hi6220 i2c nodes

This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
use this I2C IP of Synopsys Designware for HiKey board.

Signed-off-by: Xinwei Kong <[email protected]>
Signed-off-by: Chen Feng <[email protected]>
---
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 37 +++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 82d2488..6b591a9 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -208,5 +208,42 @@
clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
+
+ i2c0: i2c@f7100000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xf7100000 0x0 0x1000>;
+ interrupts = <0 44 4>;
+ clocks = <&sys_ctrl HI6220_I2C0_CLK>;
+ clock-names = "clk_i2c0";
+ i2c-sda-hold-time-ns = <300>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
+ status = "ok";
+ };
+
+ i2c1: i2c@f7101000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xf7101000 0x0 0x1000>;
+ interrupts = <0 45 4>;
+ clocks = <&sys_ctrl HI6220_I2C1_CLK>;
+ clock-names = "clk_i2c1";
+ i2c-sda-hold-time-ns = <300>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
+ status = "ok";
+ };
+
+ i2c2: i2c@f7102000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xf7102000 0x0 0x1000>;
+ interrupts = <0 46 4>;
+ clocks = <&sys_ctrl HI6220_I2C2_CLK>;
+ clock-names = "clk_i2c2";
+ i2c-sda-hold-time-ns = <300>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
+ status = "ok";
+ };
+
};
};
--
1.9.1

2015-11-25 10:35:41

by Xinwei Kong

Subject: Re: [PATCH 1/1] arm64: dts: add all hi6220 i2c nodes

+to [email protected]

On 2015/11/25 17:49, Xinwei Kong wrote:
> This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
> use this I2C IP of Synopsys Designware for HiKey board.
>
> Signed-off-by: Xinwei Kong <[email protected]>
> Signed-off-by: Chen Feng <[email protected]>
> ---
> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 37 +++++++++++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index 82d2488..6b591a9 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -208,5 +208,42 @@
> clock-names = "uartclk", "apb_pclk";
> status = "disabled";
> };
> +
> + i2c0: i2c@f7100000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0xf7100000 0x0 0x1000>;
> + interrupts = <0 44 4>;
> + clocks = <&sys_ctrl HI6220_I2C0_CLK>;
> + clock-names = "clk_i2c0";
> + i2c-sda-hold-time-ns = <300>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
> + status = "ok";
> + };
> +
> + i2c1: i2c@f7101000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0xf7101000 0x0 0x1000>;
> + interrupts = <0 45 4>;
> + clocks = <&sys_ctrl HI6220_I2C1_CLK>;
> + clock-names = "clk_i2c1";
> + i2c-sda-hold-time-ns = <300>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
> + status = "ok";
> + };
> +
> + i2c2: i2c@f7102000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0xf7102000 0x0 0x1000>;
> + interrupts = <0 46 4>;
> + clocks = <&sys_ctrl HI6220_I2C2_CLK>;
> + clock-names = "clk_i2c2";
> + i2c-sda-hold-time-ns = <300>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
> + status = "ok";
> + };
> +
> };
> };
>

2015-11-25 12:25:32

by Shawn Guo

Subject: Re: [PATCH 1/1] arm64: dts: add all hi6220 i2c nodes

On Wed, Nov 25, 2015 at 05:49:02PM +0800, Xinwei Kong wrote:
> This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
> use this I2C IP of Synopsys Designware for HiKey board.
>
> Signed-off-by: Xinwei Kong <[email protected]>
> Signed-off-by: Chen Feng <[email protected]>
> ---
> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 37 +++++++++++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index 82d2488..6b591a9 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -208,5 +208,42 @@
> clock-names = "uartclk", "apb_pclk";
> status = "disabled";
> };
> +
> + i2c0: i2c@f7100000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0xf7100000 0x0 0x1000>;
> + interrupts = <0 44 4>;
> + clocks = <&sys_ctrl HI6220_I2C0_CLK>;
> + clock-names = "clk_i2c0";
> + i2c-sda-hold-time-ns = <300>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
> + status = "ok";

Shouldn't it be set "disabled" in <soc>.dtsi and let <board>.dts enable
it per board design?

Shawn

> + };
> +
> + i2c1: i2c@f7101000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0xf7101000 0x0 0x1000>;
> + interrupts = <0 45 4>;
> + clocks = <&sys_ctrl HI6220_I2C1_CLK>;
> + clock-names = "clk_i2c1";
> + i2c-sda-hold-time-ns = <300>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
> + status = "ok";
> + };
> +
> + i2c2: i2c@f7102000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0xf7102000 0x0 0x1000>;
> + interrupts = <0 46 4>;
> + clocks = <&sys_ctrl HI6220_I2C2_CLK>;
> + clock-names = "clk_i2c2";
> + i2c-sda-hold-time-ns = <300>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
> + status = "ok";
> + };
> +
> };
> };
> --
> 1.9.1
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>

2015-11-26 03:17:11

by Xinwei Kong

Subject: Re: [PATCH 1/1] arm64: dts: add all hi6220 i2c nodes

hi Shawn,

On 2015/11/25 20:24, Shawn Guo wrote:
> On Wed, Nov 25, 2015 at 05:49:02PM +0800, Xinwei Kong wrote:
>> This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
>> use this I2C IP of Synopsys Designware for HiKey board.
>>
>> Signed-off-by: Xinwei Kong <[email protected]>
>> Signed-off-by: Chen Feng <[email protected]>
>> ---
>> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 37 +++++++++++++++++++++++++++++++
>> 1 file changed, 37 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> index 82d2488..6b591a9 100644
>> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> @@ -208,5 +208,42 @@
>> clock-names = "uartclk", "apb_pclk";
>> status = "disabled";
>> };
>> +
>> + i2c0: i2c@f7100000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7100000 0x0 0x1000>;
>> + interrupts = <0 44 4>;
>> + clocks = <&sys_ctrl HI6220_I2C0_CLK>;
>> + clock-names = "clk_i2c0";
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
>> + status = "ok";
>
> Shouldn't it be set "disabled" in <soc>.dtsi and let <board>.dts enable
> it per board design?
>
> Shawn

get it.

thank you
xinwei
>
>> + };
>> +
>> + i2c1: i2c@f7101000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7101000 0x0 0x1000>;
>> + interrupts = <0 45 4>;
>> + clocks = <&sys_ctrl HI6220_I2C1_CLK>;
>> + clock-names = "clk_i2c1";
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
>> + status = "ok";
>> + };
>> +
>> + i2c2: i2c@f7102000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7102000 0x0 0x1000>;
>> + interrupts = <0 46 4>;
>> + clocks = <&sys_ctrl HI6220_I2C2_CLK>;
>> + clock-names = "clk_i2c2";
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
>> + status = "ok";
>> + };
>> +
>> };
>> };
>> --
>> 1.9.1
>>
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> [email protected]
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>
>
> .
>