2015-11-26 07:57:10

by Xinwei Kong

Subject: [PATCH v2] arm64: dts: add all hi6220 i2c nodes

This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
use this I2C IP of Synopsys Designware for HiKey board.

Signed-off-by: Xinwei Kong <[email protected]>
---
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 37 +++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 82d2488..85d4a8b 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -208,5 +208,42 @@
clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
+
+ i2c0: i2c@f7100000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xf7100000 0x0 0x1000>;
+ interrupts = <0 44 4>;
+ clocks = <&sys_ctrl HI6220_I2C0_CLK>;
+ clock-names = "clk_i2c0";
+ i2c-sda-hold-time-ns = <300>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@f7101000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xf7101000 0x0 0x1000>;
+ interrupts = <0 45 4>;
+ clocks = <&sys_ctrl HI6220_I2C1_CLK>;
+ clock-names = "clk_i2c1";
+ i2c-sda-hold-time-ns = <300>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@f7102000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xf7102000 0x0 0x1000>;
+ interrupts = <0 46 4>;
+ clocks = <&sys_ctrl HI6220_I2C2_CLK>;
+ clock-names = "clk_i2c2";
+ i2c-sda-hold-time-ns = <300>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
+ status = "disabled";
+ };
+
};
};
--
1.9.1

2015-12-02 02:05:40

by Shawn Guo

Subject: Re: [PATCH v2] arm64: dts: add all hi6220 i2c nodes

On Thu, Nov 26, 2015 at 03:57:03PM +0800, Xinwei Kong wrote:
> This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
> use this I2C IP of Synopsys Designware for HiKey board.
>
> Signed-off-by: Xinwei Kong <[email protected]>
> ---
> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 37 +++++++++++++++++++++++++++++++
> 1 file changed, 37 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index 82d2488..85d4a8b 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -208,5 +208,42 @@
> clock-names = "uartclk", "apb_pclk";
> status = "disabled";
> };
> +
> + i2c0: i2c@f7100000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0xf7100000 0x0 0x1000>;
> + interrupts = <0 44 4>;
> + clocks = <&sys_ctrl HI6220_I2C0_CLK>;
> + clock-names = "clk_i2c0";

Neither bindings doc i2c-designware.txt defines this property, nor
kernel i2c-designware driver uses this property. So I think this
clock-names property can just be dropped.

Otherwise, the patch looks good to me.

Shawn

> + i2c-sda-hold-time-ns = <300>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c@f7101000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0xf7101000 0x0 0x1000>;
> + interrupts = <0 45 4>;
> + clocks = <&sys_ctrl HI6220_I2C1_CLK>;
> + clock-names = "clk_i2c1";
> + i2c-sda-hold-time-ns = <300>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@f7102000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0xf7102000 0x0 0x1000>;
> + interrupts = <0 46 4>;
> + clocks = <&sys_ctrl HI6220_I2C2_CLK>;
> + clock-names = "clk_i2c2";
> + i2c-sda-hold-time-ns = <300>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
> + status = "disabled";
> + };
> +
> };
> };
> --
> 1.9.1
>
>
>

2015-12-02 02:40:19

by Xinwei Kong

Subject: Re: [PATCH v2] arm64: dts: add all hi6220 i2c nodes

hi Shawn

On 2015/12/2 10:05, Shawn Guo wrote:
> On Thu, Nov 26, 2015 at 03:57:03PM +0800, Xinwei Kong wrote:
>> This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
>> use this I2C IP of Synopsys Designware for HiKey board.
>>
>> Signed-off-by: Xinwei Kong <[email protected]>
>> ---
>> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 37 +++++++++++++++++++++++++++++++
>> 1 file changed, 37 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> index 82d2488..85d4a8b 100644
>> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> @@ -208,5 +208,42 @@
>> clock-names = "uartclk", "apb_pclk";
>> status = "disabled";
>> };
>> +
>> + i2c0: i2c@f7100000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7100000 0x0 0x1000>;
>> + interrupts = <0 44 4>;
>> + clocks = <&sys_ctrl HI6220_I2C0_CLK>;
>> + clock-names = "clk_i2c0";
>
> Neither bindings doc i2c-designware.txt defines this property, nor
> kernel i2c-designware driver uses this property. So I think this
> clock-names property can just be dropped.
>
This property should been delete it. I will debug it in HiKey board then
send v3 patch.

Thank you
xinwei
> Otherwise, the patch looks good to me.
>
> Shawn
>
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
>> + status = "disabled";
>> + };
>> +
>> + i2c1: i2c@f7101000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7101000 0x0 0x1000>;
>> + interrupts = <0 45 4>;
>> + clocks = <&sys_ctrl HI6220_I2C1_CLK>;
>> + clock-names = "clk_i2c1";
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
>> + status = "disabled";
>> + };
>> +
>> + i2c2: i2c@f7102000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7102000 0x0 0x1000>;
>> + interrupts = <0 46 4>;
>> + clocks = <&sys_ctrl HI6220_I2C2_CLK>;
>> + clock-names = "clk_i2c2";
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
>> + status = "disabled";
>> + };
>> +
>> };
>> };
>> --
>> 1.9.1
>>
>>
>>
>
> .
>