2015-12-02 06:31:30

by Xinwei Kong

Subject: [PATCH v3] arm64: dts: add all hi6220 i2c nodes

This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
use this I2C IP of Synopsys Designware for HiKey board.

Signed-off-by: Xinwei Kong <[email protected]>
---
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 82d2488..6eae673 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -208,5 +208,36 @@
clock-names = "uartclk", "apb_pclk";
status = "disabled";
};
+
+ i2c0: i2c@f7100000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xf7100000 0x0 0x1000>;
+ interrupts = <0 44 4>;
+ i2c-sda-hold-time-ns = <300>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@f7101000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xf7101000 0x0 0x1000>;
+ interrupts = <0 45 4>;
+ i2c-sda-hold-time-ns = <300>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@f7102000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0xf7102000 0x0 0x1000>;
+ interrupts = <0 46 4>;
+ i2c-sda-hold-time-ns = <300>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
+ status = "disabled";
+ };
+
};
};
--
1.9.1

2015-12-02 07:34:48

by Shawn Guo

Subject: Re: [PATCH v3] arm64: dts: add all hi6220 i2c nodes

On Wed, Dec 02, 2015 at 02:29:09PM +0800, Xinwei Kong wrote:
> This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
> use this I2C IP of Synopsys Designware for HiKey board.
>
> Signed-off-by: Xinwei Kong <[email protected]>
> ---
> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 31 +++++++++++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index 82d2488..6eae673 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -208,5 +208,36 @@
> clock-names = "uartclk", "apb_pclk";
> status = "disabled";
> };
> +
> + i2c0: i2c@f7100000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0xf7100000 0x0 0x1000>;
> + interrupts = <0 44 4>;
> + i2c-sda-hold-time-ns = <300>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
> + status = "disabled";

You got me wrong. I was asking you to drop property 'clock-names' only,
not 'clocks' together. I do not think it works if you drop property
'clocks', because I see that dw_i2c_plat_probe() will fail if
devm_clk_get() fails. Did you test the patch before posting it out?

Shawn

> + };
> +
> + i2c1: i2c@f7101000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0xf7101000 0x0 0x1000>;
> + interrupts = <0 45 4>;
> + i2c-sda-hold-time-ns = <300>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@f7102000 {
> + compatible = "snps,designware-i2c";
> + reg = <0x0 0xf7102000 0x0 0x1000>;
> + interrupts = <0 46 4>;
> + i2c-sda-hold-time-ns = <300>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
> + status = "disabled";
> + };
> +
> };
> };
> --
> 1.9.1
>
>
>

2015-12-02 09:07:29

by Xinwei Kong

Subject: Re: [PATCH v3] arm64: dts: add all hi6220 i2c nodes

On 2015/12/2 15:34, Shawn Guo wrote:
> On Wed, Dec 02, 2015 at 02:29:09PM +0800, Xinwei Kong wrote:
>> This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
>> use this I2C IP of Synopsys Designware for HiKey board.
>>
>> Signed-off-by: Xinwei Kong <[email protected]>
>> ---
>> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 31 +++++++++++++++++++++++++++++++
>> 1 file changed, 31 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> index 82d2488..6eae673 100644
>> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
>> @@ -208,5 +208,36 @@
>> clock-names = "uartclk", "apb_pclk";
>> status = "disabled";
>> };
>> +
>> + i2c0: i2c@f7100000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7100000 0x0 0x1000>;
>> + interrupts = <0 44 4>;
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
>> + status = "disabled";
>
> You got me wrong. I was asking you to drop property 'clock-names' only,
> not 'clocks' together. I do not think it works if you drop property
> 'clocks', because I see that dw_i2c_plat_probe() will fail if
> devm_clk_get() fails. Did you test the patch before posting it out?

I am sorry that my Hikey board don't work well. I will fix my board and test
it.

Thank you very much.
xinwei

>
> Shawn
>
>> + };
>> +
>> + i2c1: i2c@f7101000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7101000 0x0 0x1000>;
>> + interrupts = <0 45 4>;
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
>> + status = "disabled";
>> + };
>> +
>> + i2c2: i2c@f7102000 {
>> + compatible = "snps,designware-i2c";
>> + reg = <0x0 0xf7102000 0x0 0x1000>;
>> + interrupts = <0 46 4>;
>> + i2c-sda-hold-time-ns = <300>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
>> + status = "disabled";
>> + };
>> +
>> };
>> };
>> --
>> 1.9.1
>>
>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> .
>