This patchset clean some code in slicoss driver:
* Removes not used macro.
* Remove a macro and just inline code.
Changes in v2:
* Remove inline function into inline code.
Sergio Paracuellos (2):
staging: slicoss: remove not used UPDATE_STATS macro
staging: slicoss: remove UPDATE_STATS_GB macro and inline code
drivers/staging/slicoss/slic.h | 13 ----------
drivers/staging/slicoss/slicoss.c | 52 +++++++++++++++++++--------------------
2 files changed, 25 insertions(+), 40 deletions(-)
--
1.9.1
This patch removes UPDATE_STATS_GB macro in slic.h header file
and just inline code. This improve readability.
Signed-off-by: Sergio Paracuellos <[email protected]>
---
drivers/staging/slicoss/slic.h | 5 ----
drivers/staging/slicoss/slicoss.c | 52 +++++++++++++++++++--------------------
2 files changed, 25 insertions(+), 32 deletions(-)
diff --git a/drivers/staging/slicoss/slic.h b/drivers/staging/slicoss/slic.h
index 2c05868..2893bdf 100644
--- a/drivers/staging/slicoss/slic.h
+++ b/drivers/staging/slicoss/slic.h
@@ -548,11 +548,6 @@ static inline void slic_flush_write(struct adapter *adapter)
ioread32(adapter->regs + SLIC_REG_HOSTID);
}
-#define UPDATE_STATS_GB(largestat, newstat, oldstat) \
-{ \
- (largestat) += ((newstat) - (oldstat)); \
-}
-
#if BITS_PER_LONG == 64
#define SLIC_GET_ADDR_LOW(_addr) (u32)((u64)(_addr) & \
0x00000000FFFFFFFF)
diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
index b6ec0a1..ffc7c45 100644
--- a/drivers/staging/slicoss/slicoss.c
+++ b/drivers/staging/slicoss/slicoss.c
@@ -1014,45 +1014,43 @@ static void slic_upr_request_complete(struct adapter *adapter, u32 isr)
break;
}
- UPDATE_STATS_GB(stst->tcp.xmit_tcp_segs, stats->xmit_tcp_segs,
- old->xmit_tcp_segs);
+ stst->tcp.xmit_tcp_segs =
+ stats->xmit_tcp_segs - old->xmit_tcp_segs;
- UPDATE_STATS_GB(stst->tcp.xmit_tcp_bytes, stats->xmit_tcp_bytes,
- old->xmit_tcp_bytes);
+ stst->tcp.xmit_tcp_bytes =
+ stats->xmit_tcp_bytes - old->xmit_tcp_bytes;
- UPDATE_STATS_GB(stst->tcp.rcv_tcp_segs, stats->rcv_tcp_segs,
- old->rcv_tcp_segs);
+ stst->tcp.rcv_tcp_segs =
+ stats->rcv_tcp_segs - old->rcv_tcp_segs;
- UPDATE_STATS_GB(stst->tcp.rcv_tcp_bytes, stats->rcv_tcp_bytes,
- old->rcv_tcp_bytes);
+ stst->tcp.rcv_tcp_bytes =
+ stats->rcv_tcp_bytes - old->rcv_tcp_bytes;
- UPDATE_STATS_GB(stst->iface.xmt_bytes, stats->xmit_bytes,
- old->xmit_bytes);
+ stst->iface.xmt_bytes =
+ stats->xmit_bytes - old->xmit_bytes;
- UPDATE_STATS_GB(stst->iface.xmt_ucast, stats->xmit_unicasts,
- old->xmit_unicasts);
+ stst->iface.xmt_ucast =
+ stats->xmit_unicasts - old->xmit_unicasts;
- UPDATE_STATS_GB(stst->iface.rcv_bytes, stats->rcv_bytes,
- old->rcv_bytes);
+ stst->iface.rcv_bytes =
+ stats->rcv_bytes - old->rcv_bytes;
- UPDATE_STATS_GB(stst->iface.rcv_ucast, stats->rcv_unicasts,
- old->rcv_unicasts);
+ stst->iface.rcv_ucast =
+ stats->rcv_unicasts - old->rcv_unicasts;
- UPDATE_STATS_GB(stst->iface.xmt_errors, stats->xmit_collisions,
- old->xmit_collisions);
+ stst->iface.xmt_errors =
+ stats->xmit_collisions - old->xmit_collisions;
- UPDATE_STATS_GB(stst->iface.xmt_errors,
- stats->xmit_excess_collisions,
- old->xmit_excess_collisions);
+ stst->iface.xmt_errors = stats->xmit_excess_collisions -
+ old->xmit_excess_collisions;
- UPDATE_STATS_GB(stst->iface.xmt_errors, stats->xmit_other_error,
- old->xmit_other_error);
+ stst->iface.xmt_errors =
+ stats->xmit_other_error - old->xmit_other_error;
- UPDATE_STATS_GB(stst->iface.rcv_errors, stats->rcv_other_error,
- old->rcv_other_error);
+ stst->iface.rcv_errors =
+ stats->rcv_other_error - old->rcv_other_error;
- UPDATE_STATS_GB(stst->iface.rcv_discards, stats->rcv_drops,
- old->rcv_drops);
+ stst->iface.rcv_discards = stats->rcv_drops - old->rcv_drops;
if (stats->rcv_drops > old->rcv_drops)
adapter->rcv_drops += (stats->rcv_drops -
--
1.9.1
This patch remove UPDATE_STATS macro from
header slic.h which is not being used.
Signed-off-by: Sergio Paracuellos <[email protected]>
---
drivers/staging/slicoss/slic.h | 8 --------
1 file changed, 8 deletions(-)
diff --git a/drivers/staging/slicoss/slic.h b/drivers/staging/slicoss/slic.h
index 1f6562c..2c05868 100644
--- a/drivers/staging/slicoss/slic.h
+++ b/drivers/staging/slicoss/slic.h
@@ -548,14 +548,6 @@ static inline void slic_flush_write(struct adapter *adapter)
ioread32(adapter->regs + SLIC_REG_HOSTID);
}
-#define UPDATE_STATS(largestat, newstat, oldstat) \
-{ \
- if ((newstat) < (oldstat)) \
- (largestat) += ((newstat) + (0xFFFFFFFF - oldstat + 1)); \
- else \
- (largestat) += ((newstat) - (oldstat)); \
-}
-
#define UPDATE_STATS_GB(largestat, newstat, oldstat) \
{ \
(largestat) += ((newstat) - (oldstat)); \
--
1.9.1
On 11/24/2016 08:21 PM, Sergio Paracuellos wrote:
> This patch removes UPDATE_STATS_GB macro in slic.h header file
> and just inline code. This improve readability.
>
> Signed-off-by: Sergio Paracuellos <[email protected]>
> ---
> drivers/staging/slicoss/slic.h | 5 ----
> drivers/staging/slicoss/slicoss.c | 52 +++++++++++++++++++--------------------
> 2 files changed, 25 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/staging/slicoss/slic.h b/drivers/staging/slicoss/slic.h
> index 2c05868..2893bdf 100644
> --- a/drivers/staging/slicoss/slic.h
> +++ b/drivers/staging/slicoss/slic.h
> @@ -548,11 +548,6 @@ static inline void slic_flush_write(struct adapter *adapter)
> ioread32(adapter->regs + SLIC_REG_HOSTID);
> }
>
> -#define UPDATE_STATS_GB(largestat, newstat, oldstat) \
> -{ \
> - (largestat) += ((newstat) - (oldstat)); \
> -}
> -
> #if BITS_PER_LONG == 64
> #define SLIC_GET_ADDR_LOW(_addr) (u32)((u64)(_addr) & \
> 0x00000000FFFFFFFF)
> diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
> index b6ec0a1..ffc7c45 100644
> --- a/drivers/staging/slicoss/slicoss.c
> +++ b/drivers/staging/slicoss/slicoss.c
> @@ -1014,45 +1014,43 @@ static void slic_upr_request_complete(struct adapter *adapter, u32 isr)
> break;
> }
>
> - UPDATE_STATS_GB(stst->tcp.xmit_tcp_segs, stats->xmit_tcp_segs,
> - old->xmit_tcp_segs);
> + stst->tcp.xmit_tcp_segs =
> + stats->xmit_tcp_segs - old->xmit_tcp_segs;
Missed this the first time, but the difference should be added to the
value in stst:
stst->tcp.xmit_tcp_segs +=
stats->xmit_tcp_segs - old->xmit_tcp_segs;
The same applies to the changes below.
>
> - UPDATE_STATS_GB(stst->tcp.xmit_tcp_bytes, stats->xmit_tcp_bytes,
> - old->xmit_tcp_bytes);
> + stst->tcp.xmit_tcp_bytes =
> + stats->xmit_tcp_bytes - old->xmit_tcp_bytes;
>
> - UPDATE_STATS_GB(stst->tcp.rcv_tcp_segs, stats->rcv_tcp_segs,
> - old->rcv_tcp_segs);
> + stst->tcp.rcv_tcp_segs =
> + stats->rcv_tcp_segs - old->rcv_tcp_segs;
>
> - UPDATE_STATS_GB(stst->tcp.rcv_tcp_bytes, stats->rcv_tcp_bytes,
> - old->rcv_tcp_bytes);
> + stst->tcp.rcv_tcp_bytes =
> + stats->rcv_tcp_bytes - old->rcv_tcp_bytes;
>
> - UPDATE_STATS_GB(stst->iface.xmt_bytes, stats->xmit_bytes,
> - old->xmit_bytes);
> + stst->iface.xmt_bytes =
> + stats->xmit_bytes - old->xmit_bytes;
>
> - UPDATE_STATS_GB(stst->iface.xmt_ucast, stats->xmit_unicasts,
> - old->xmit_unicasts);
> + stst->iface.xmt_ucast =
> + stats->xmit_unicasts - old->xmit_unicasts;
>
> - UPDATE_STATS_GB(stst->iface.rcv_bytes, stats->rcv_bytes,
> - old->rcv_bytes);
> + stst->iface.rcv_bytes =
> + stats->rcv_bytes - old->rcv_bytes;
>
> - UPDATE_STATS_GB(stst->iface.rcv_ucast, stats->rcv_unicasts,
> - old->rcv_unicasts);
> + stst->iface.rcv_ucast =
> + stats->rcv_unicasts - old->rcv_unicasts;
>
> - UPDATE_STATS_GB(stst->iface.xmt_errors, stats->xmit_collisions,
> - old->xmit_collisions);
> + stst->iface.xmt_errors =
> + stats->xmit_collisions - old->xmit_collisions;
>
> - UPDATE_STATS_GB(stst->iface.xmt_errors,
> - stats->xmit_excess_collisions,
> - old->xmit_excess_collisions);
> + stst->iface.xmt_errors = stats->xmit_excess_collisions -
> + old->xmit_excess_collisions;
>
> - UPDATE_STATS_GB(stst->iface.xmt_errors, stats->xmit_other_error,
> - old->xmit_other_error);
> + stst->iface.xmt_errors =
> + stats->xmit_other_error - old->xmit_other_error;
>
> - UPDATE_STATS_GB(stst->iface.rcv_errors, stats->rcv_other_error,
> - old->rcv_other_error);
> + stst->iface.rcv_errors =
> + stats->rcv_other_error - old->rcv_other_error;
>
> - UPDATE_STATS_GB(stst->iface.rcv_discards, stats->rcv_drops,
> - old->rcv_drops);
> + stst->iface.rcv_discards = stats->rcv_drops - old->rcv_drops;
>
> if (stats->rcv_drops > old->rcv_drops)
> adapter->rcv_drops += (stats->rcv_drops -
>
Regards,
Markus
On Thu, Nov 24, 2016 at 8:41 PM, Markus Böhme <[email protected]> wrote:
> On 11/24/2016 08:21 PM, Sergio Paracuellos wrote:
>> This patch removes UPDATE_STATS_GB macro in slic.h header file
>> and just inline code. This improve readability.
>>
>> Signed-off-by: Sergio Paracuellos <[email protected]>
>> ---
>> drivers/staging/slicoss/slic.h | 5 ----
>> drivers/staging/slicoss/slicoss.c | 52 +++++++++++++++++++--------------------
>> 2 files changed, 25 insertions(+), 32 deletions(-)
>>
>> diff --git a/drivers/staging/slicoss/slic.h b/drivers/staging/slicoss/slic.h
>> index 2c05868..2893bdf 100644
>> --- a/drivers/staging/slicoss/slic.h
>> +++ b/drivers/staging/slicoss/slic.h
>> @@ -548,11 +548,6 @@ static inline void slic_flush_write(struct adapter *adapter)
>> ioread32(adapter->regs + SLIC_REG_HOSTID);
>> }
>>
>> -#define UPDATE_STATS_GB(largestat, newstat, oldstat) \
>> -{ \
>> - (largestat) += ((newstat) - (oldstat)); \
>> -}
>> -
>> #if BITS_PER_LONG == 64
>> #define SLIC_GET_ADDR_LOW(_addr) (u32)((u64)(_addr) & \
>> 0x00000000FFFFFFFF)
>> diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
>> index b6ec0a1..ffc7c45 100644
>> --- a/drivers/staging/slicoss/slicoss.c
>> +++ b/drivers/staging/slicoss/slicoss.c
>> @@ -1014,45 +1014,43 @@ static void slic_upr_request_complete(struct adapter *adapter, u32 isr)
>> break;
>> }
>>
>> - UPDATE_STATS_GB(stst->tcp.xmit_tcp_segs, stats->xmit_tcp_segs,
>> - old->xmit_tcp_segs);
>> + stst->tcp.xmit_tcp_segs =
>> + stats->xmit_tcp_segs - old->xmit_tcp_segs;
>
> Missed this the first time, but the difference should be added to the
> value in stst:
>
> stst->tcp.xmit_tcp_segs +=
> stats->xmit_tcp_segs - old->xmit_tcp_segs;
>
> The same applies to the changes below.
True. I have just sent v3 with these fixed.
Thanks for let me know.
Cheers,
Sergio Paracuellos