In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
---
arch/arm/boot/dts/hisi-x5hd2.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index 3ee7967c202d..693b85b2cc7d 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -452,14 +452,14 @@ gmac1: ethernet@1841000 {
status = "disabled";
};
- usb0: ehci@1890000 {
+ usb0: usb@1890000 {
compatible = "generic-ehci";
reg = <0x1890000 0x1000>;
interrupts = <0 66 4>;
clocks = <&clock HIX5HD2_USB_CLK>;
};
- usb1: ohci@1880000 {
+ usb1: usb@1880000 {
compatible = "generic-ohci";
reg = <0x1880000 0x1000>;
interrupts = <0 67 4>;
--
2.28.0
Hi Serge,
On 2020/11/11 17:15, Serge Semin wrote:
> In accordance with the Generic EHCI/OHCI bindings the corresponding node
> name is suppose to comply with the Generic USB HCD DT schema, which
> requires the USB nodes to have the name acceptable by the regexp:
> "^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
> nodes are correctly named.
>
> Signed-off-by: Serge Semin <[email protected]>
> Acked-by: Krzysztof Kozlowski <[email protected]>
> ---
> arch/arm/boot/dts/hisi-x5hd2.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
> index 3ee7967c202d..693b85b2cc7d 100644
> --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
> +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
> @@ -452,14 +452,14 @@ gmac1: ethernet@1841000 {
> status = "disabled";
> };
>
> - usb0: ehci@1890000 {
> + usb0: usb@1890000 {
> compatible = "generic-ehci";
> reg = <0x1890000 0x1000>;
> interrupts = <0 66 4>;
> clocks = <&clock HIX5HD2_USB_CLK>;
> };
>
> - usb1: ohci@1880000 {
> + usb1: usb@1880000 {
> compatible = "generic-ohci";
> reg = <0x1880000 0x1000>;
> interrupts = <0 67 4>;
>
Thanks!
But a similar patch has been sent out earlier:
https://patchwork.kernel.org/project/linux-arm-kernel/patch/[email protected]/
Best Regards,
Wei