This is the start of the stable review cycle for the 4.4.201 release.
There are 43 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.201-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.4.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.4.201-rc1
Tejun Heo <[email protected]>
cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is dead
Konstantin Khlebnikov <[email protected]>
mm/filemap.c: don't initiate writeback if mapping has no dirty pages
Joakim Zhang <[email protected]>
can: flexcan: disable completely the ECC mechanism
Wenwen Wang <[email protected]>
e1000: fix memory leaks
Manfred Rudigier <[email protected]>
igb: Fix constant media auto sense switching when no cable is connected
Trond Myklebust <[email protected]>
NFSv4: Don't allow a cached open with a revoked delegation
Jiangfeng Xiao <[email protected]>
net: hisilicon: Fix "Trying to free already-free IRQ"
Nicholas Piggin <[email protected]>
scsi: qla2xxx: stop timer in shutdown path
Alan Stern <[email protected]>
USB: Skip endpoints with 0 maxpacket length
Kim Phillips <[email protected]>
perf/x86/amd/ibs: Fix reading of the IBS OpData register and thus precise RIP validity
Peter Chen <[email protected]>
usb: gadget: configfs: fix concurrent issue between composite APIs
Chandana Kishori Chiluveru <[email protected]>
usb: gadget: composite: Fix possible double free memory bug
Cristian Birsan <[email protected]>
usb: gadget: udc: atmel: Fix interrupt storm in FIFO mode.
Nikhil Badola <[email protected]>
usb: fsl: Check memory resource before releasing it
Taehee Yoo <[email protected]>
bonding: fix unexpected IFF_BONDING bit unset
Eric Dumazet <[email protected]>
ipvs: move old_secure_tcp into struct netns_ipvs
Daniel Wagner <[email protected]>
scsi: lpfc: Honor module parameter lpfc_use_adisc
Hannes Reinecke <[email protected]>
scsi: qla2xxx: fixup incorrect usage of host_byte
Vidya Sagar <[email protected]>
PCI: tegra: Enable Relaxed Ordering only for Tegra20 & Tegra30
Al Viro <[email protected]>
configfs: fix a deadlock in configfs_symlink()
Gustavo A. R. Silva <[email protected]>
drivers: usb: usbip: Add missing break statement to switch
Johan Hovold <[email protected]>
can: peak_usb: fix slab info leak
Navid Emamdoost <[email protected]>
can: gs_usb: gs_can_open(): prevent memory leak
Stephane Grosjean <[email protected]>
can: peak_usb: fix a potential out-of-sync while decoding packets
Kurt Van Dijck <[email protected]>
can: c_can: c_can_poll(): only read status register after status IRQ
Johan Hovold <[email protected]>
can: usb_8dev: fix use-after-free on disconnect
Dan Carpenter <[email protected]>
netfilter: ipset: Fix an error code in ip_set_sockfn_get()
Lukas Wunner <[email protected]>
netfilter: nf_tables: Align nft_expr private data to 64-bit
Alexandru Ardelean <[email protected]>
iio: imu: adis16480: make sure provided frequency is positive
Luis Henriques <[email protected]>
ceph: fix use-after-free in __ceph_remove_cap()
Alex Deucher <[email protected]>
drm/radeon: fix si_enable_smc_cac() failed issue
Jiri Olsa <[email protected]>
perf tools: Fix time sorting
Kevin Hao <[email protected]>
dump_stack: avoid the livelock of the dump_lock
Michal Hocko <[email protected]>
mm, vmstat: hide /proc/pagetypeinfo from normal users
Mel Gorman <[email protected]>
mm, meminit: recalculate pcpu batch and high limits after init completes
Takashi Iwai <[email protected]>
ALSA: hda/ca0132 - Fix possible workqueue stall
Takashi Sakamoto <[email protected]>
ALSA: bebob: fix to detect configured source of sampling clock for Focusrite Saffire Pro i/o series
Pan Bian <[email protected]>
nfc: netlink: fix double device reference drop
Manish Chopra <[email protected]>
qede: fix NULL pointer deref in __qede_remove()
Pan Bian <[email protected]>
NFC: st21nfca: fix double free
Pan Bian <[email protected]>
NFC: fdp: fix incorrect free object
Eric Dumazet <[email protected]>
net: fix data-race in neigh_event_send()
Oliver Neukum <[email protected]>
CDC-NCM: handle incomplete transfer of MTU
-------------
Diffstat:
Makefile | 4 +-
arch/x86/kernel/cpu/perf_event_amd_ibs.c | 2 +-
drivers/gpu/drm/radeon/si_dpm.c | 1 +
drivers/iio/imu/adis16480.c | 5 +-
drivers/net/bonding/bond_main.c | 6 +-
drivers/net/can/c_can/c_can.c | 25 ++++--
drivers/net/can/c_can/c_can.h | 1 +
drivers/net/can/flexcan.c | 1 +
drivers/net/can/usb/gs_usb.c | 1 +
drivers/net/can/usb/peak_usb/pcan_usb.c | 17 ++--
drivers/net/can/usb/peak_usb/pcan_usb_core.c | 2 +-
drivers/net/can/usb/usb_8dev.c | 3 +-
drivers/net/ethernet/hisilicon/hip04_eth.c | 1 -
drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 7 +-
drivers/net/ethernet/intel/igb/igb_main.c | 3 +-
drivers/net/ethernet/qlogic/qede/qede_main.c | 12 ++-
drivers/net/usb/cdc_ncm.c | 6 +-
drivers/nfc/fdp/i2c.c | 2 +-
drivers/nfc/st21nfca/core.c | 1 +
drivers/pci/host/pci-tegra.c | 7 +-
drivers/scsi/lpfc/lpfc_nportdisc.c | 4 +-
drivers/scsi/qla2xxx/qla_bsg.c | 6 +-
drivers/scsi/qla2xxx/qla_os.c | 4 +
drivers/usb/core/config.c | 5 ++
drivers/usb/gadget/composite.c | 4 +
drivers/usb/gadget/configfs.c | 110 +++++++++++++++++++++--
drivers/usb/gadget/udc/atmel_usba_udc.c | 6 +-
drivers/usb/gadget/udc/fsl_udc_core.c | 2 +-
drivers/usb/usbip/vhci_hcd.c | 1 +
fs/ceph/caps.c | 10 +--
fs/configfs/symlink.c | 33 ++++++-
fs/fs-writeback.c | 9 +-
fs/nfs/delegation.c | 10 +++
fs/nfs/delegation.h | 1 +
fs/nfs/nfs4proc.c | 7 +-
include/net/ip_vs.h | 1 +
include/net/neighbour.h | 4 +-
include/net/netfilter/nf_tables.h | 3 +-
lib/dump_stack.c | 7 +-
mm/filemap.c | 3 +-
mm/page_alloc.c | 10 ++-
mm/vmstat.c | 2 +-
net/netfilter/ipset/ip_set_core.c | 8 +-
net/netfilter/ipvs/ip_vs_ctl.c | 15 ++--
net/nfc/netlink.c | 2 -
sound/firewire/bebob/bebob_focusrite.c | 3 +
sound/pci/hda/patch_ca0132.c | 2 +-
tools/perf/util/hist.c | 2 +-
48 files changed, 298 insertions(+), 83 deletions(-)
From: Tejun Heo <[email protected]>
commit 65de03e251382306a4575b1779c57c87889eee49 upstream.
cgroup writeback tries to refresh the associated wb immediately if the
current wb is dead. This is to avoid keeping issuing IOs on the stale
wb after memcg - blkcg association has changed (ie. when blkcg got
disabled / enabled higher up in the hierarchy).
Unfortunately, the logic gets triggered spuriously on inodes which are
associated with dead cgroups. When the logic is triggered on dead
cgroups, the attempt fails only after doing quite a bit of work
allocating and initializing a new wb.
While c3aab9a0bd91 ("mm/filemap.c: don't initiate writeback if mapping
has no dirty pages") alleviated the issue significantly as it now only
triggers when the inode has dirty pages. However, the condition can
still be triggered before the inode is switched to a different cgroup
and the logic simply doesn't make sense.
Skip the immediate switching if the associated memcg is dying.
This is a simplified version of the following two patches:
* https://lore.kernel.org/linux-mm/20190513183053.GA73423@dennisz-mbp/
* http://lkml.kernel.org/r/156355839560.2063.5265687291430814589.stgit@buzz
Cc: Konstantin Khlebnikov <[email protected]>
Fixes: e8a7abf5a5bd ("writeback: disassociate inodes from dying bdi_writebacks")
Acked-by: Dennis Zhou <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fs-writeback.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -582,10 +582,13 @@ void wbc_attach_and_unlock_inode(struct
spin_unlock(&inode->i_lock);
/*
- * A dying wb indicates that the memcg-blkcg mapping has changed
- * and a new wb is already serving the memcg. Switch immediately.
+ * A dying wb indicates that either the blkcg associated with the
+ * memcg changed or the associated memcg is dying. In the first
+ * case, a replacement wb should already be available and we should
+ * refresh the wb immediately. In the second case, trying to
+ * refresh will keep failing.
*/
- if (unlikely(wb_dying(wbc->wb)))
+ if (unlikely(wb_dying(wbc->wb) && !css_is_dying(wbc->wb->memcg_css)))
inode_switch_wbs(inode, wbc->wb_id);
}
From: Manish Chopra <[email protected]>
[ Upstream commit deabc87111c690097c03765ea017cd500f7376fc ]
While rebooting the system with SR-IOV vfs enabled leads
to below crash due to recurrence of __qede_remove() on the VF
devices (first from .shutdown() flow of the VF itself and
another from PF's .shutdown() flow executing pci_disable_sriov())
This patch adds a safeguard in __qede_remove() flow to fix this,
so that driver doesn't attempt to remove "already removed" devices.
[ 194.360134] BUG: unable to handle kernel NULL pointer dereference at 00000000000008dc
[ 194.360227] IP: [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[ 194.360304] PGD 0
[ 194.360325] Oops: 0000 [#1] SMP
[ 194.360360] Modules linked in: tcp_lp fuse tun bridge stp llc devlink bonding ip_set nfnetlink ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_umad rpcrdma sunrpc rdma_ucm ib_uverbs ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi dell_smbios iTCO_wdt iTCO_vendor_support dell_wmi_descriptor dcdbas vfat fat pcc_cpufreq skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd qedr ib_core pcspkr ses enclosure joydev ipmi_ssif sg i2c_i801 lpc_ich mei_me mei wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_pad acpi_power_meter xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul crct10dif_common crc32c_intel mgag200
[ 194.361044] qede i2c_algo_bit drm_kms_helper qed syscopyarea sysfillrect nvme sysimgblt fb_sys_fops ttm nvme_core mpt3sas crc8 ptp drm pps_core ahci raid_class scsi_transport_sas libahci libata drm_panel_orientation_quirks nfit libnvdimm dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ip_tables]
[ 194.361297] CPU: 51 PID: 7996 Comm: reboot Kdump: loaded Not tainted 3.10.0-1062.el7.x86_64 #1
[ 194.361359] Hardware name: Dell Inc. PowerEdge MX840c/0740HW, BIOS 2.4.6 10/15/2019
[ 194.361412] task: ffff9cea9b360000 ti: ffff9ceabebdc000 task.ti: ffff9ceabebdc000
[ 194.361463] RIP: 0010:[<ffffffffc03553c4>] [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[ 194.361534] RSP: 0018:ffff9ceabebdfac0 EFLAGS: 00010282
[ 194.361570] RAX: 0000000000000000 RBX: ffff9cd013846098 RCX: 0000000000000000
[ 194.361621] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9cd013846098
[ 194.361668] RBP: ffff9ceabebdfae8 R08: 0000000000000000 R09: 0000000000000000
[ 194.361715] R10: 00000000bfe14201 R11: ffff9ceabfe141e0 R12: 0000000000000000
[ 194.361762] R13: ffff9cd013846098 R14: 0000000000000000 R15: ffff9ceab5e48000
[ 194.361810] FS: 00007f799c02d880(0000) GS:ffff9ceacb0c0000(0000) knlGS:0000000000000000
[ 194.361865] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 194.361903] CR2: 00000000000008dc CR3: 0000001bdac76000 CR4: 00000000007607e0
[ 194.361953] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 194.362002] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 194.362051] PKRU: 55555554
[ 194.362073] Call Trace:
[ 194.362109] [<ffffffffc0355500>] qede_remove+0x10/0x20 [qede]
[ 194.362180] [<ffffffffb97d0f3e>] pci_device_remove+0x3e/0xc0
[ 194.362240] [<ffffffffb98b3c52>] __device_release_driver+0x82/0xf0
[ 194.362285] [<ffffffffb98b3ce3>] device_release_driver+0x23/0x30
[ 194.362343] [<ffffffffb97c86d4>] pci_stop_bus_device+0x84/0xa0
[ 194.362388] [<ffffffffb97c87e2>] pci_stop_and_remove_bus_device+0x12/0x20
[ 194.362450] [<ffffffffb97f153f>] pci_iov_remove_virtfn+0xaf/0x160
[ 194.362496] [<ffffffffb97f1aec>] sriov_disable+0x3c/0xf0
[ 194.362534] [<ffffffffb97f1bc3>] pci_disable_sriov+0x23/0x30
[ 194.362599] [<ffffffffc02f83c3>] qed_sriov_disable+0x5e3/0x650 [qed]
[ 194.362658] [<ffffffffb9622df6>] ? kfree+0x106/0x140
[ 194.362709] [<ffffffffc02cc0c0>] ? qed_free_stream_mem+0x70/0x90 [qed]
[ 194.362754] [<ffffffffb9622df6>] ? kfree+0x106/0x140
[ 194.362803] [<ffffffffc02cd659>] qed_slowpath_stop+0x1a9/0x1d0 [qed]
[ 194.362854] [<ffffffffc035544e>] __qede_remove+0xae/0x130 [qede]
[ 194.362904] [<ffffffffc03554e0>] qede_shutdown+0x10/0x20 [qede]
[ 194.362956] [<ffffffffb97cf90a>] pci_device_shutdown+0x3a/0x60
[ 194.363010] [<ffffffffb98b180b>] device_shutdown+0xfb/0x1f0
[ 194.363066] [<ffffffffb94b66c6>] kernel_restart_prepare+0x36/0x40
[ 194.363107] [<ffffffffb94b66e2>] kernel_restart+0x12/0x60
[ 194.363146] [<ffffffffb94b6959>] SYSC_reboot+0x229/0x260
[ 194.363196] [<ffffffffb95f200d>] ? handle_mm_fault+0x39d/0x9b0
[ 194.363253] [<ffffffffb942b621>] ? __switch_to+0x151/0x580
[ 194.363304] [<ffffffffb9b7ec28>] ? __schedule+0x448/0x9c0
[ 194.363343] [<ffffffffb94b69fe>] SyS_reboot+0xe/0x10
[ 194.363387] [<ffffffffb9b8bede>] system_call_fastpath+0x25/0x2a
[ 194.363430] Code: f9 e9 37 ff ff ff 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 4c 8d af 98 00 00 00 41 54 4c 89 ef 41 89 f4 53 e8 4c e4 55 f9 <80> b8 dc 08 00 00 01 48 89 c3 4c 8d b8 c0 08 00 00 4c 8b b0 c0
[ 194.363712] RIP [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[ 194.363764] RSP <ffff9ceabebdfac0>
[ 194.363791] CR2: 00000000000008dc
Signed-off-by: Manish Chopra <[email protected]>
Signed-off-by: Ariel Elior <[email protected]>
Signed-off-by: Sudarsana Kalluru <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/qlogic/qede/qede_main.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -1465,8 +1465,16 @@ enum qede_remove_mode {
static void __qede_remove(struct pci_dev *pdev, enum qede_remove_mode mode)
{
struct net_device *ndev = pci_get_drvdata(pdev);
- struct qede_dev *edev = netdev_priv(ndev);
- struct qed_dev *cdev = edev->cdev;
+ struct qede_dev *edev;
+ struct qed_dev *cdev;
+
+ if (!ndev) {
+ dev_info(&pdev->dev, "Device has already been removed\n");
+ return;
+ }
+
+ edev = netdev_priv(ndev);
+ cdev = edev->cdev;
DP_INFO(edev, "Starting qede_remove\n");
From: Lukas Wunner <[email protected]>
commit 250367c59e6ba0d79d702a059712d66edacd4a1a upstream.
Invoking the following commands on a 32-bit architecture with strict
alignment requirements (such as an ARMv7-based Raspberry Pi) results
in an alignment exception:
# nft add table ip test-ip4
# nft add chain ip test-ip4 output { type filter hook output priority 0; }
# nft add rule ip test-ip4 output quota 1025 bytes
Alignment trap: not handling instruction e1b26f9f at [<7f4473f8>]
Unhandled fault: alignment exception (0x001) at 0xb832e824
Internal error: : 1 [#1] PREEMPT SMP ARM
Hardware name: BCM2835
[<7f4473fc>] (nft_quota_do_init [nft_quota])
[<7f447448>] (nft_quota_init [nft_quota])
[<7f4260d0>] (nf_tables_newrule [nf_tables])
[<7f4168dc>] (nfnetlink_rcv_batch [nfnetlink])
[<7f416bd0>] (nfnetlink_rcv [nfnetlink])
[<8078b334>] (netlink_unicast)
[<8078b664>] (netlink_sendmsg)
[<8071b47c>] (sock_sendmsg)
[<8071bd18>] (___sys_sendmsg)
[<8071ce3c>] (__sys_sendmsg)
[<8071ce94>] (sys_sendmsg)
The reason is that nft_quota_do_init() calls atomic64_set() on an
atomic64_t which is only aligned to 32-bit, not 64-bit, because it
succeeds struct nft_expr in memory which only contains a 32-bit pointer.
Fix by aligning the nft_expr private data to 64-bit.
Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Lukas Wunner <[email protected]>
Cc: [email protected] # v3.13+
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/netfilter/nf_tables.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/include/net/netfilter/nf_tables.h
+++ b/include/net/netfilter/nf_tables.h
@@ -648,7 +648,8 @@ struct nft_expr_ops {
*/
struct nft_expr {
const struct nft_expr_ops *ops;
- unsigned char data[];
+ unsigned char data[]
+ __attribute__((aligned(__alignof__(u64))));
};
static inline void *nft_expr_priv(const struct nft_expr *expr)
From: Oliver Neukum <[email protected]>
[ Upstream commit 332f989a3b0041b810836c5c3747e59aad7e9d0b ]
A malicious device may give half an answer when asked
for its MTU. The driver will proceed after this with
a garbage MTU. Anything but a complete answer must be treated
as an error.
V2: used sizeof as request by Alexander
Reported-and-tested-by: [email protected]
Signed-off-by: Oliver Neukum <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/cdc_ncm.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -533,8 +533,8 @@ static void cdc_ncm_set_dgram_size(struc
/* read current mtu value from device */
err = usbnet_read_cmd(dev, USB_CDC_GET_MAX_DATAGRAM_SIZE,
USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
- 0, iface_no, &max_datagram_size, 2);
- if (err < 0) {
+ 0, iface_no, &max_datagram_size, sizeof(max_datagram_size));
+ if (err < sizeof(max_datagram_size)) {
dev_dbg(&dev->intf->dev, "GET_MAX_DATAGRAM_SIZE failed\n");
goto out;
}
@@ -545,7 +545,7 @@ static void cdc_ncm_set_dgram_size(struc
max_datagram_size = cpu_to_le16(ctx->max_datagram_size);
err = usbnet_write_cmd(dev, USB_CDC_SET_MAX_DATAGRAM_SIZE,
USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE,
- 0, iface_no, &max_datagram_size, 2);
+ 0, iface_no, &max_datagram_size, sizeof(max_datagram_size));
if (err < 0)
dev_dbg(&dev->intf->dev, "SET_MAX_DATAGRAM_SIZE failed\n");
From: Joakim Zhang <[email protected]>
[ Upstream commit 5e269324db5adb2f5f6ec9a93a9c7b0672932b47 ]
The ECC (memory error detection and correction) mechanism can be
activated or not, controlled by the ECCDIS bit in CAN_MECR. When
disabled, updates on indications and reporting registers are stopped.
So if want to disable ECC completely, had better assert ECCDIS bit, not
just mask the related interrupts.
Fixes: cdce844865be ("can: flexcan: add vf610 support for FlexCAN")
Signed-off-by: Joakim Zhang <[email protected]>
Cc: linux-stable <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/can/flexcan.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -923,6 +923,7 @@ static int flexcan_chip_start(struct net
reg_mecr = flexcan_read(®s->mecr);
reg_mecr &= ~FLEXCAN_MECR_ECRWRDIS;
flexcan_write(reg_mecr, ®s->mecr);
+ reg_mecr |= FLEXCAN_MECR_ECCDIS;
reg_mecr &= ~(FLEXCAN_MECR_NCEFAFRZ | FLEXCAN_MECR_HANCEI_MSK |
FLEXCAN_MECR_FANCEI_MSK);
flexcan_write(reg_mecr, ®s->mecr);
From: Peter Chen <[email protected]>
[ Upstream commit 1a1c851bbd706ea9f3a9756c2d3db28523506d3b ]
We meet several NULL pointer issues if configfs_composite_unbind
and composite_setup (or composite_disconnect) are running together.
These issues occur when do the function switch stress test, the
configfs_compsoite_unbind is called from user mode by
echo "" to /sys/../UDC entry, and meanwhile, the setup interrupt
or disconnect interrupt occurs by hardware. The composite_setup
will get the cdev from get_gadget_data, but configfs_composite_unbind
will set gadget data as NULL, so the NULL pointer issue occurs.
This concurrent is hard to reproduce by native kernel, but can be
reproduced by android kernel.
In this commit, we introduce one spinlock belongs to structure
gadget_info since we can't use the same spinlock in usb_composite_dev
due to exclusive running together between composite_setup and
configfs_composite_unbind. And one bit flag 'unbind' to indicate the
code is at unbind routine, this bit is needed due to we release the
lock at during configfs_composite_unbind sometimes, and composite_setup
may be run at that time.
Several oops:
oops 1:
android_work: sent uevent USB_STATE=CONNECTED
configfs-gadget gadget: super-speed config #1: b
android_work: sent uevent USB_STATE=CONFIGURED
init: Received control message 'start' for 'adbd' from pid: 3515 (system_server)
Unable to handle kernel NULL pointer dereference at virtual address 0000002a
init: Received control message 'stop' for 'adbd' from pid: 3375 (/vendor/bin/hw/[email protected])
Mem abort info:
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgd = ffff8008f1b7f000
[000000000000002a] *pgd=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 4 PID: 2457 Comm: irq/125-5b11000 Not tainted 4.14.98-07846-g0b40a9b-dirty #16
Hardware name: Freescale i.MX8QM MEK (DT)
task: ffff8008f2a98000 task.stack: ffff00000b7b8000
PC is at composite_setup+0x44/0x1508
LR is at android_setup+0xb8/0x13c
pc : [<ffff0000089ffb3c>] lr : [<ffff000008a032fc>] pstate: 800001c5
sp : ffff00000b7bbb80
x29: ffff00000b7bbb80 x28: ffff8008f2a3c010
x27: 0000000000000001 x26: 0000000000000000 [1232/1897]
audit: audit_lost=25791 audit_rate_limit=5 audit_backlog_limit=64
x25: 00000000ffffffa1 x24: ffff8008f2a3c010
audit: rate limit exceeded
x23: 0000000000000409 x22: ffff000009c8e000
x21: ffff8008f7a8b428 x20: ffff00000afae000
x19: ffff0000089ff000 x18: 0000000000000000
x17: 0000000000000000 x16: ffff0000082b7c9c
x15: 0000000000000000 x14: f1866f5b952aca46
x13: e35502e30d44349c x12: 0000000000000008
x11: 0000000000000008 x10: 0000000000000a30
x9 : ffff00000b7bbd00 x8 : ffff8008f2a98a90
x7 : ffff8008f27a9c90 x6 : 0000000000000001
x5 : 0000000000000000 x4 : 0000000000000001
x3 : 0000000000000000 x2 : 0000000000000006
x1 : ffff0000089ff8d0 x0 : 732a010310b9ed00
X7: 0xffff8008f27a9c10:
9c10 00000002 00000000 00000001 00000000 13110000 ffff0000 00000002 00208040
9c30 00000000 00000000 00000000 00000000 00000000 00000005 00000029 00000000
9c50 00051778 00000001 f27a8e00 ffff8008 00000005 00000000 00000078 00000078
9c70 00000078 00000000 09031d48 ffff0000 00100000 00000000 00400000 00000000
9c90 00000001 00000000 00000000 00000000 00000000 00000000 ffefb1a0 ffff8008
9cb0 f27a9ca8 ffff8008 00000000 00000000 b9d88037 00000173 1618a3eb 00000001
9cd0 870a792a 0000002e 16188fe6 00000001 0000242b 00000000 00000000 00000000
using random self ethernet address
9cf0 019a4646 00000000 000547f3 00000000 ecfd6c33 00000002 00000000
using random host ethernet address
00000000
X8: 0xffff8008f2a98a10:
8a10 00000000 00000000 f7788d00 ffff8008 00000001 00000000 00000000 00000000
8a30 eb218000 ffff8008 f2a98000 ffff8008 f2a98000 ffff8008 09885000 ffff0000
8a50 f34df480 ffff8008 00000000 00000000 f2a98648 ffff8008 09c8e000 ffff0000
8a70 fff2c800 ffff8008 09031d48 ffff0000 0b7bbd00 ffff0000 0b7bbd00 ffff0000
8a90 080861bc ffff0000 00000000 00000000 00000000 00000000 00000000 00000000
8ab0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8ad0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8af0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
X21: 0xffff8008f7a8b3a8:
b3a8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b3c8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b3e8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b408 00000000 00000000 00000000 00000000 00000000 00000000 00000001 00000000
b428 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b448 0053004d 00540046 00300031 00010030 eb07b520 ffff8008 20011201 00000003
b468 e418d109 0104404e 00010302 00000000 eb07b558 ffff8008 eb07b558 ffff8008
b488 f7a8b488 ffff8008 f7a8b488 ffff8008 f7a8b300 ffff8008 00000000 00000000
X24: 0xffff8008f2a3bf90:
bf90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
c010 00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000
c030 f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008
c050 f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
c070 f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008
X28: 0xffff8008f2a3bf90:
bf90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
c010 00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000
c030 f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008
c050 f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
c070 f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008
Process irq/125-5b11000 (pid: 2457, stack limit = 0xffff00000b7b8000)
Call trace:
Exception stack(0xffff00000b7bba40 to 0xffff00000b7bbb80)
ba40: 732a010310b9ed00 ffff0000089ff8d0 0000000000000006 0000000000000000
ba60: 0000000000000001 0000000000000000 0000000000000001 ffff8008f27a9c90
ba80: ffff8008f2a98a90 ffff00000b7bbd00 0000000000000a30 0000000000000008
baa0: 0000000000000008 e35502e30d44349c f1866f5b952aca46 0000000000000000
bac0: ffff0000082b7c9c 0000000000000000 0000000000000000 ffff0000089ff000
bae0: ffff00000afae000 ffff8008f7a8b428 ffff000009c8e000 0000000000000409
bb00: ffff8008f2a3c010 00000000ffffffa1 0000000000000000 0000000000000001
bb20: ffff8008f2a3c010 ffff00000b7bbb80 ffff000008a032fc ffff00000b7bbb80
bb40: ffff0000089ffb3c 00000000800001c5 ffff00000b7bbb80 732a010310b9ed00
bb60: ffffffffffffffff ffff0000080f777c ffff00000b7bbb80 ffff0000089ffb3c
[<ffff0000089ffb3c>] composite_setup+0x44/0x1508
[<ffff000008a032fc>] android_setup+0xb8/0x13c
[<ffff0000089bd9a8>] cdns3_ep0_delegate_req+0x44/0x70
[<ffff0000089bdff4>] cdns3_check_ep0_interrupt_proceed+0x33c/0x654
[<ffff0000089bca44>] cdns3_device_thread_irq_handler+0x4b0/0x4bc
[<ffff0000089b77b4>] cdns3_thread_irq+0x48/0x68
[<ffff000008145bf0>] irq_thread_fn+0x28/0x88
[<ffff000008145e38>] irq_thread+0x13c/0x228
[<ffff0000080fed70>] kthread+0x104/0x130
[<ffff000008085064>] ret_from_fork+0x10/0x18
oops2:
composite_disconnect: Calling disconnect on a Gadget that is not connected
android_work: did not send uevent (0 0 (null))
init: Received control message 'stop' for 'adbd' from pid: 3359 (/vendor/bin/hw/[email protected])
init: Sending signal 9 to service 'adbd' (pid 22343) process group...
------------[ cut here ]------------
audit: audit_lost=180038 audit_rate_limit=5 audit_backlog_limit=64
audit: rate limit exceeded
WARNING: CPU: 0 PID: 3468 at kernel_imx/drivers/usb/gadget/composite.c:2009 composite_disconnect+0x80/0x88
Modules linked in:
CPU: 0 PID: 3468 Comm: HWC-UEvent-Thre Not tainted 4.14.98-07846-g0b40a9b-dirty #16
Hardware name: Freescale i.MX8QM MEK (DT)
task: ffff8008f2349c00 task.stack: ffff00000b0a8000
PC is at composite_disconnect+0x80/0x88
LR is at composite_disconnect+0x80/0x88
pc : [<ffff0000089ff9b0>] lr : [<ffff0000089ff9b0>] pstate: 600001c5
sp : ffff000008003dd0
x29: ffff000008003dd0 x28: ffff8008f2349c00
x27: ffff000009885018 x26: ffff000008004000
Timeout for IPC response!
x25: ffff000009885018 x24: ffff000009c8e280
x23: ffff8008f2d98010 x22: 00000000000001c0
x21: ffff8008f2d98394 x20: ffff8008f2d98010
x19: 0000000000000000 x18: 0000e3956f4f075a
fxos8700 4-001e: i2c block read acc failed
x17: 0000e395735727e8 x16: ffff00000829f4d4
x15: ffffffffffffffff x14: 7463656e6e6f6320
x13: 746f6e2009090920 x12: 7369207461687420
x11: 7465676461472061 x10: 206e6f207463656e
x9 : 6e6f637369642067 x8 : ffff000009c8e280
x7 : ffff0000086ca6cc x6 : ffff000009f15e78
x5 : 0000000000000000 x4 : 0000000000000000
x3 : ffffffffffffffff x2 : c3f28b86000c3900
x1 : c3f28b86000c3900 x0 : 000000000000004e
X20: 0xffff8008f2d97f90:
7f90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
libprocessgroup: Failed to kill process cgroup uid 0 pid 22343 in 215ms, 1 processes remain
7fd0
Timeout for IPC response!
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
using random self ethernet address
7ff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
8010 00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc
using random host ethernet address
ffff0000
8030 f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008
8050 f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
8070 f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008
X21: 0xffff8008f2d98314:
8314 ffff8008 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8334 00000000 00000000 00000000 00000000 00000000 08a04cf4 ffff0000 00000000
8354 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8374 00000000 00000000 00000000 00001001 00000000 00000000 00000000 00000000
8394 e4bbe4bb 0f230000 ffff0000 0afae000 ffff0000 ae001000 00000000 f206d400
Timeout for IPC response!
83b4 ffff8008 00000000 00000000 f7957b18 ffff8008 f7957718 ffff8008 f7957018
83d4 ffff8008 f7957118 ffff8008 f7957618 ffff8008 f7957818 ffff8008 f7957918
83f4 ffff8008 f7957d18 ffff8008 00000000 00000000 00000000 00000000 00000000
X23: 0xffff8008f2d97f90:
7f90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7ff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
8010 00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc ffff0000
8030 f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008
8050 f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
8070 f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008
X28: 0xffff8008f2349b80:
9b80 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9ba0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9bc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9be0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9c00 00000022 00000000 ffffffff ffffffff 00010001 00000000 00000000 00000000
9c20 0b0a8000 ffff0000 00000002 00404040 00000000 00000000 00000000 00000000
9c40 00000001 00000000 00000001 00000000 001ebd44 00000001 f390b800 ffff8008
9c60 00000000 00000001 00000070 00000070 00000070 00000000 09031d48 ffff0000
Call trace:
Exception stack(0xffff000008003c90 to 0xffff000008003dd0)
3c80: 000000000000004e c3f28b86000c3900
3ca0: c3f28b86000c3900 ffffffffffffffff 0000000000000000 0000000000000000
3cc0: ffff000009f15e78 ffff0000086ca6cc ffff000009c8e280 6e6f637369642067
3ce0: 206e6f207463656e 7465676461472061 7369207461687420 746f6e2009090920
3d00: 7463656e6e6f6320 ffffffffffffffff ffff00000829f4d4 0000e395735727e8
3d20: 0000e3956f4f075a 0000000000000000 ffff8008f2d98010 ffff8008f2d98394
3d40: 00000000000001c0 ffff8008f2d98010 ffff000009c8e280 ffff000009885018
3d60: ffff000008004000 ffff000009885018 ffff8008f2349c00 ffff000008003dd0
3d80: ffff0000089ff9b0 ffff000008003dd0 ffff0000089ff9b0 00000000600001c5
3da0: ffff8008f33f2cd8 0000000000000000 0000ffffffffffff 0000000000000000
init: Received control message 'start' for 'adbd' from pid: 3359 (/vendor/bin/hw/[email protected])
3dc0: ffff000008003dd0 ffff0000089ff9b0
[<ffff0000089ff9b0>] composite_disconnect+0x80/0x88
[<ffff000008a044d4>] android_disconnect+0x3c/0x68
[<ffff0000089ba9f8>] cdns3_device_irq_handler+0xfc/0x2c8
[<ffff0000089b84c0>] cdns3_irq+0x44/0x94
[<ffff00000814494c>] __handle_irq_event_percpu+0x60/0x24c
[<ffff000008144c0c>] handle_irq_event+0x58/0xc0
[<ffff00000814873c>] handle_fasteoi_irq+0x98/0x180
[<ffff000008143a10>] generic_handle_irq+0x24/0x38
[<ffff000008144170>] __handle_domain_irq+0x60/0xac
[<ffff0000080819c4>] gic_handle_irq+0xd4/0x17c
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/configfs.c | 110 ++++++++++++++++++++++++++++++++--
1 file changed, 105 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index d412e234f336a..f91a43140694b 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -62,6 +62,8 @@ struct gadget_info {
bool use_os_desc;
char b_vendor_code;
char qw_sign[OS_STRING_QW_SIGN_LEN];
+ spinlock_t spinlock;
+ bool unbind;
};
static inline struct gadget_info *to_gadget_info(struct config_item *item)
@@ -1246,6 +1248,7 @@ static int configfs_composite_bind(struct usb_gadget *gadget,
int ret;
/* the gi->lock is hold by the caller */
+ gi->unbind = 0;
cdev->gadget = gadget;
set_gadget_data(gadget, cdev);
ret = composite_dev_prepare(composite, cdev);
@@ -1378,31 +1381,128 @@ static void configfs_composite_unbind(struct usb_gadget *gadget)
{
struct usb_composite_dev *cdev;
struct gadget_info *gi;
+ unsigned long flags;
/* the gi->lock is hold by the caller */
cdev = get_gadget_data(gadget);
gi = container_of(cdev, struct gadget_info, cdev);
+ spin_lock_irqsave(&gi->spinlock, flags);
+ gi->unbind = 1;
+ spin_unlock_irqrestore(&gi->spinlock, flags);
kfree(otg_desc[0]);
otg_desc[0] = NULL;
purge_configs_funcs(gi);
composite_dev_cleanup(cdev);
usb_ep_autoconfig_reset(cdev->gadget);
+ spin_lock_irqsave(&gi->spinlock, flags);
cdev->gadget = NULL;
set_gadget_data(gadget, NULL);
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+}
+
+static int configfs_composite_setup(struct usb_gadget *gadget,
+ const struct usb_ctrlrequest *ctrl)
+{
+ struct usb_composite_dev *cdev;
+ struct gadget_info *gi;
+ unsigned long flags;
+ int ret;
+
+ cdev = get_gadget_data(gadget);
+ if (!cdev)
+ return 0;
+
+ gi = container_of(cdev, struct gadget_info, cdev);
+ spin_lock_irqsave(&gi->spinlock, flags);
+ cdev = get_gadget_data(gadget);
+ if (!cdev || gi->unbind) {
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+ return 0;
+ }
+
+ ret = composite_setup(gadget, ctrl);
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+ return ret;
+}
+
+static void configfs_composite_disconnect(struct usb_gadget *gadget)
+{
+ struct usb_composite_dev *cdev;
+ struct gadget_info *gi;
+ unsigned long flags;
+
+ cdev = get_gadget_data(gadget);
+ if (!cdev)
+ return;
+
+ gi = container_of(cdev, struct gadget_info, cdev);
+ spin_lock_irqsave(&gi->spinlock, flags);
+ cdev = get_gadget_data(gadget);
+ if (!cdev || gi->unbind) {
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+ return;
+ }
+
+ composite_disconnect(gadget);
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+}
+
+static void configfs_composite_suspend(struct usb_gadget *gadget)
+{
+ struct usb_composite_dev *cdev;
+ struct gadget_info *gi;
+ unsigned long flags;
+
+ cdev = get_gadget_data(gadget);
+ if (!cdev)
+ return;
+
+ gi = container_of(cdev, struct gadget_info, cdev);
+ spin_lock_irqsave(&gi->spinlock, flags);
+ cdev = get_gadget_data(gadget);
+ if (!cdev || gi->unbind) {
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+ return;
+ }
+
+ composite_suspend(gadget);
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+}
+
+static void configfs_composite_resume(struct usb_gadget *gadget)
+{
+ struct usb_composite_dev *cdev;
+ struct gadget_info *gi;
+ unsigned long flags;
+
+ cdev = get_gadget_data(gadget);
+ if (!cdev)
+ return;
+
+ gi = container_of(cdev, struct gadget_info, cdev);
+ spin_lock_irqsave(&gi->spinlock, flags);
+ cdev = get_gadget_data(gadget);
+ if (!cdev || gi->unbind) {
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+ return;
+ }
+
+ composite_resume(gadget);
+ spin_unlock_irqrestore(&gi->spinlock, flags);
}
static const struct usb_gadget_driver configfs_driver_template = {
.bind = configfs_composite_bind,
.unbind = configfs_composite_unbind,
- .setup = composite_setup,
- .reset = composite_disconnect,
- .disconnect = composite_disconnect,
+ .setup = configfs_composite_setup,
+ .reset = configfs_composite_disconnect,
+ .disconnect = configfs_composite_disconnect,
- .suspend = composite_suspend,
- .resume = composite_resume,
+ .suspend = configfs_composite_suspend,
+ .resume = configfs_composite_resume,
.max_speed = USB_SPEED_SUPER,
.driver = {
--
2.20.1
From: Kurt Van Dijck <[email protected]>
commit 3cb3eaac52c0f145d895f4b6c22834d5f02b8569 upstream.
When the status register is read without the status IRQ pending, the
chip may not raise the interrupt line for an upcoming status interrupt
and the driver may miss a status interrupt.
It is critical that the BUSOFF status interrupt is forwarded to the
higher layers, since no more interrupts will follow without
intervention.
Thanks to Wolfgang and Joe for bringing up the first idea.
Signed-off-by: Kurt Van Dijck <[email protected]>
Cc: Wolfgang Grandegger <[email protected]>
Cc: Joe Burmeister <[email protected]>
Fixes: fa39b54ccf28 ("can: c_can: Get rid of pointless interrupts")
Cc: linux-stable <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/c_can/c_can.c | 25 ++++++++++++++++++++-----
drivers/net/can/c_can/c_can.h | 1 +
2 files changed, 21 insertions(+), 5 deletions(-)
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -97,6 +97,9 @@
#define BTR_TSEG2_SHIFT 12
#define BTR_TSEG2_MASK (0x7 << BTR_TSEG2_SHIFT)
+/* interrupt register */
+#define INT_STS_PENDING 0x8000
+
/* brp extension register */
#define BRP_EXT_BRPE_MASK 0x0f
#define BRP_EXT_BRPE_SHIFT 0
@@ -1029,10 +1032,16 @@ static int c_can_poll(struct napi_struct
u16 curr, last = priv->last_status;
int work_done = 0;
- priv->last_status = curr = priv->read_reg(priv, C_CAN_STS_REG);
- /* Ack status on C_CAN. D_CAN is self clearing */
- if (priv->type != BOSCH_D_CAN)
- priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED);
+ /* Only read the status register if a status interrupt was pending */
+ if (atomic_xchg(&priv->sie_pending, 0)) {
+ priv->last_status = curr = priv->read_reg(priv, C_CAN_STS_REG);
+ /* Ack status on C_CAN. D_CAN is self clearing */
+ if (priv->type != BOSCH_D_CAN)
+ priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED);
+ } else {
+ /* no change detected ... */
+ curr = last;
+ }
/* handle state changes */
if ((curr & STATUS_EWARN) && (!(last & STATUS_EWARN))) {
@@ -1083,10 +1092,16 @@ static irqreturn_t c_can_isr(int irq, vo
{
struct net_device *dev = (struct net_device *)dev_id;
struct c_can_priv *priv = netdev_priv(dev);
+ int reg_int;
- if (!priv->read_reg(priv, C_CAN_INT_REG))
+ reg_int = priv->read_reg(priv, C_CAN_INT_REG);
+ if (!reg_int)
return IRQ_NONE;
+ /* save for later use */
+ if (reg_int & INT_STS_PENDING)
+ atomic_set(&priv->sie_pending, 1);
+
/* disable all interrupts and schedule the NAPI */
c_can_irq_control(priv, false);
napi_schedule(&priv->napi);
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -198,6 +198,7 @@ struct c_can_priv {
struct net_device *dev;
struct device *device;
atomic_t tx_active;
+ atomic_t sie_pending;
unsigned long tx_dir;
int last_status;
u16 (*read_reg) (const struct c_can_priv *priv, enum reg index);
From: Pan Bian <[email protected]>
[ Upstream commit 517ce4e93368938b204451285e53014549804868 ]
The address of fw_vsc_cfg is on stack. Releasing it with devm_kfree() is
incorrect, which may result in a system crash or other security impacts.
The expected object to free is *fw_vsc_cfg.
Signed-off-by: Pan Bian <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nfc/fdp/i2c.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/nfc/fdp/i2c.c
+++ b/drivers/nfc/fdp/i2c.c
@@ -268,7 +268,7 @@ static void fdp_nci_i2c_read_device_prop
*fw_vsc_cfg, len);
if (r) {
- devm_kfree(dev, fw_vsc_cfg);
+ devm_kfree(dev, *fw_vsc_cfg);
goto vsc_read_err;
}
} else {
On Mon, Nov 11, 2019 at 07:28:14PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.201 release.
> There are 43 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
> Anything received after that time might be too late.
>
I am getting lots of
WARNING: modpost: Found 2 section mismatch(es).
To see full details build your kernel with:
'make CONFIG_DEBUG_SECTION_MISMATCH=y'
FATAL: modpost: Section mismatches detected.
Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them.
scripts/Makefile.modpost:97: recipe for target 'vmlinux.o' failed
for v4.4.y, v4.9.y, and v4.14.y.
Bisecting in v4.4.y points to commit 13e9ce202ddcf95bf6 ("mm, meminit:
recalculate pcpu batch and high limits after init completes"). Reverting
it fixes the problem in all three branches.
Guenter
stable-rc/linux-4.4.y boot: 84 boots: 7 failed, 68 passed with 7 offline, 2 conflicts (v4.4.200-44-g92b9901ba23d)
Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.4.y/kernel/v4.4.200-44-g92b9901ba23d/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.4.y/kernel/v4.4.200-44-g92b9901ba23d/
Tree: stable-rc
Branch: linux-4.4.y
Git Describe: v4.4.200-44-g92b9901ba23d
Git Commit: 92b9901ba23dbd26e916a393e557a5ffec117124
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 42 unique boards, 17 SoC families, 13 builds out of 190
Boot Failures Detected:
arm:
multi_v7_defconfig:
gcc-8:
exynos4412-odroidx2: 1 failed lab
exynos5422-odroidxu3: 2 failed labs
rk3288-rock2-square: 1 failed lab
rk3288-veyron-jaq: 1 failed lab
tegra124-jetson-tk1: 1 failed lab
tegra124-nyan-big: 1 failed lab
Offline Platforms:
arm:
sunxi_defconfig:
gcc-8
sun5i-r8-chip: 1 offline lab
sun7i-a20-bananapi: 1 offline lab
multi_v7_defconfig:
gcc-8
qcom-apq8064-cm-qs600: 1 offline lab
sun5i-r8-chip: 1 offline lab
sun7i-a20-bananapi: 1 offline lab
davinci_all_defconfig:
gcc-8
dm365evm,legacy: 1 offline lab
qcom_defconfig:
gcc-8
qcom-apq8064-cm-qs600: 1 offline lab
Conflicting Boot Failures Detected: (These likely are not failures as other labs are reporting PASS. Needs review.)
arm:
multi_v7_defconfig:
exynos5800-peach-pi:
lab-collabora: FAIL (gcc-8)
lab-baylibre-seattle: PASS (gcc-8)
x86_64:
x86_64_defconfig:
qemu_x86_64:
lab-collabora: PASS (gcc-8)
lab-baylibre: FAIL (gcc-8)
---
For more info write to <[email protected]>
On Mon, Nov 11, 2019 at 03:35:40PM -0800, Guenter Roeck wrote:
> On Mon, Nov 11, 2019 at 07:28:14PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.4.201 release.
> > There are 43 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
> > Anything received after that time might be too late.
> >
>
> I am getting lots of
>
> WARNING: modpost: Found 2 section mismatch(es).
> To see full details build your kernel with:
> 'make CONFIG_DEBUG_SECTION_MISMATCH=y'
> FATAL: modpost: Section mismatches detected.
> Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them.
> scripts/Makefile.modpost:97: recipe for target 'vmlinux.o' failed
>
> for v4.4.y, v4.9.y, and v4.14.y.
>
> Bisecting in v4.4.y points to commit 13e9ce202ddcf95bf6 ("mm, meminit:
> recalculate pcpu batch and high limits after init completes"). Reverting
> it fixes the problem in all three branches.
Wow that patch was backported incorrectly, gotta love quilt at times :(
I've dropped that from all 3 of those trees and will work to backport it
"correctly" by hand for a later release. I'll go release -rc2 for all 3
of those trees now.
thanks,
greg k-h
On Mon, Nov 11, 2019 at 07:28:14PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.201 release.
> There are 43 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.201-rc1.gz
-rc2 is out:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.201-rc2.gz
On 12/11/2019 05:27, Greg Kroah-Hartman wrote:
> On Mon, Nov 11, 2019 at 07:28:14PM +0100, Greg Kroah-Hartman wrote:
>> This is the start of the stable review cycle for the 4.4.201 release.
>> There are 43 patches in this series, all will be posted as a response
>> to this one. If anyone has any issues with these being applied, please
>> let me know.
>>
>> Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
>> Anything received after that time might be too late.
>>
>> The whole patch series can be found in one patch at:
>> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.201-rc1.gz
>
> -rc2 is out:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.201-rc2.gz
>
All tests for Tegra are passing ...
Test results for stable-v4.4:
6 builds: 6 pass, 0 fail
12 boots: 12 pass, 0 fail
19 tests: 19 pass, 0 fail
Linux version: 4.4.201-rc2-gca1d1b5f0f2a
Boards tested: tegra124-jetson-tk1, tegra20-ventana,
tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
On Tue, 12 Nov 2019 at 11:02, Greg Kroah-Hartman
<[email protected]> wrote:
>
> On Mon, Nov 11, 2019 at 07:28:14PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.4.201 release.
> > There are 43 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.201-rc1.gz
>
> -rc2 is out:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.4.201-rc2.gz
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.4.201-rc2
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.4.y
git commit: ca1d1b5f0f2acd3d552c3c74f44d984d06f2d595
git describe: v4.4.200-43-gca1d1b5f0f2a
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.4-oe/build/v4.4.200-43-gca1d1b5f0f2a
No regressions (compared to build v4.4.200)
No fixes (compared to build v4.4.200)
Ran 19919 total tests in the following environments and test suites.
Environments
--------------
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* build
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* network-basic-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* kvm-unit-tests
* install-android-platform-tools-r2600
* kselftest-vsyscall-mode-none
* prep-tmp-disk
* ssuite
--
Linaro LKFT
https://lkft.linaro.org
On Mon, Nov 11, 2019 at 07:28:14PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.4.201 release.
> There are 43 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
> Anything received after that time might be too late.
>
For -rc2:
Build results:
total: 170 pass: 170 fail: 0
Qemu test results:
total: 324 pass: 324 fail: 0
Guenter