This is the start of the stable review cycle for the 5.3.11 release.
There are 193 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.3.11-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.3.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.3.11-rc1
Tejun Heo <[email protected]>
cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is dead
Konstantin Khlebnikov <[email protected]>
mm/filemap.c: don't initiate writeback if mapping has no dirty pages
Huacai Chen <[email protected]>
timekeeping/vsyscall: Update VDSO data unconditionally
Leonard Crestez <[email protected]>
clk: imx8m: Use SYS_PLL1_800M as intermediate parent of CLK_ARM
Hans de Goede <[email protected]>
pinctrl: cherryview: Fix irq_valid_mask calculation
Shuning Zhang <[email protected]>
ocfs2: protect extent tree in ocfs2_prepare_inode_for_write()
Yangchun Fu <[email protected]>
gve: Fixes DMA synchronization.
Wenwen Wang <[email protected]>
e1000: fix memory leaks
Manfred Rudigier <[email protected]>
igb: Fix constant media auto sense switching when no cable is connected
Chuhong Yuan <[email protected]>
net: ethernet: arc: add the missed clk_disable_unprepare
Trond Myklebust <[email protected]>
NFSv4: Don't allow a cached open with a revoked delegation
Florian Fainelli <[email protected]>
arm64: apply ARM64_ERRATUM_843419 workaround for Brahma-B53 core
Florian Fainelli <[email protected]>
arm64: Brahma-B53 is SSB and spectre v2 safe
Doug Berger <[email protected]>
arm64: apply ARM64_ERRATUM_845719 workaround for Brahma-B53 core
Felipe Balbi <[email protected]>
usb: dwc3: gadget: fix race when disabling ep with cancelled xfers
Bjorn Andersson <[email protected]>
arm64: cpufeature: Enable Qualcomm Falkor errata 1009 for Kryo
Kairui Song <[email protected]>
x86, efi: Never relocate kernel below lowest acceptable address
Ard Biesheuvel <[email protected]>
efi: libstub/arm: Account for firmware reserved memory at the base of RAM
Jerry Snitselaar <[email protected]>
efi/tpm: Return -EINVAL when determining tpm final events log size fails
Haiyang Zhang <[email protected]>
hv_netvsc: Fix error handling in netvsc_attach()
Trond Myklebust <[email protected]>
SUNRPC: Destroy the back channel when we destroy the host transport
Trond Myklebust <[email protected]>
SUNRPC: The RDMA back channel mustn't disappear while requests are outstanding
Trond Myklebust <[email protected]>
SUNRPC: The TCP back channel mustn't disappear while requests are outstanding
zhongshiqi <[email protected]>
dc.c:use kzalloc without test
Michael Strauss <[email protected]>
drm/amd/display: Passive DP->HDMI dongle detection fix
Jun Lei <[email protected]>
drm/amd/display: add 50us buffer as WA for pstate switch in active
Jun Lei <[email protected]>
drm/amd/display: do not synchronize "drr" displays
Andrey Grodzovsky <[email protected]>
drm/amdgpu: If amdgpu_ib_schedule fails return back the error.
Andrey Grodzovsky <[email protected]>
drm/sched: Set error to s_fence if HW job submission failed.
Pierre-Eric Pelloux-Prayer <[email protected]>
drm/amdgpu/sdma5: do not execute 0-sized IBs (v2)
Lorenzo Bianconi <[email protected]>
mt76: dma: fix buffer unmap with non-linear skbs
Takashi Iwai <[email protected]>
iommu/amd: Apply the same IVRS IOAPIC workaround to Acer Aspire A315-41
Vladimir Oltean <[email protected]>
net: mscc: ocelot: refuse to overwrite the port's native vlan
Vladimir Oltean <[email protected]>
net: mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is up
Navid Emamdoost <[email protected]>
wimax: i2400: Fix memory leak in i2400m_op_rfkill_sw_toggle
Jiangfeng Xiao <[email protected]>
net: hisilicon: Fix "Trying to free already-free IRQ"
Will Deacon <[email protected]>
fjes: Handle workqueue allocation failure
Anton Eidelman <[email protected]>
nvme-multipath: fix possible io hang after ctrl reconnect
Valentin Schneider <[email protected]>
sched/topology: Allow sched_asym_cpucapacity to be disabled
Valentin Schneider <[email protected]>
sched/topology: Don't try to build empty sched domains
Nicholas Piggin <[email protected]>
scsi: qla2xxx: stop timer in shutdown path
Nicolin Chen <[email protected]>
hwmon: (ina3221) Fix read timeout issue
Lijun Ou <[email protected]>
RDMA/hns: Prevent memory leaks of eq->buf_list
Potnuri Bharat Teja <[email protected]>
RDMA/iw_cxgb4: Avoid freeing skb twice in arp failure case
GwanYeong Kim <[email protected]>
usbip: tools: Fix read_usb_vudc_device() error path handling
Johan Hovold <[email protected]>
USB: ldusb: use unsigned size format specifiers
Alan Stern <[email protected]>
USB: Skip endpoints with 0 maxpacket length
Kan Liang <[email protected]>
perf/x86/uncore: Fix event group support
Kim Phillips <[email protected]>
perf/x86/amd/ibs: Handle erratum #420 only on the affected CPU family (10h)
Kim Phillips <[email protected]>
perf/x86/amd/ibs: Fix reading of the IBS OpData register and thus precise RIP validity
Yinbo Zhu <[email protected]>
usb: dwc3: remove the call trace of USBx_GFLADJ
Peter Chen <[email protected]>
usb: gadget: configfs: fix concurrent issue between composite APIs
Navid Emamdoost <[email protected]>
usb: dwc3: pci: prevent memory leak in dwc3_pci_probe
Chandana Kishori Chiluveru <[email protected]>
usb: gadget: composite: Fix possible double free memory bug
Cristian Birsan <[email protected]>
usb: gadget: udc: atmel: Fix interrupt storm in FIFO mode.
Nikhil Badola <[email protected]>
usb: fsl: Check memory resource before releasing it
Arnd Bergmann <[email protected]>
usb: dwc3: select CONFIG_REGMAP_MMIO
Xiang Chen <[email protected]>
scsi: sd: define variable dif as unsigned int instead of bool
Taehee Yoo <[email protected]>
virt_wifi: fix refcnt leak in module exit routine
Taehee Yoo <[email protected]>
macsec: fix refcnt leak in module exit routine
Taehee Yoo <[email protected]>
bonding: use dynamic lockdep key instead of subclass
Taehee Yoo <[email protected]>
bonding: fix unexpected IFF_BONDING bit unset
Mark Zhang <[email protected]>
RDMA/nldev: Skip counter if port doesn't match
wenxu <[email protected]>
netfilter: nft_payload: fix missing check for matching length in offloads
Eric Dumazet <[email protected]>
ipvs: move old_secure_tcp into struct netns_ipvs
Davide Caratti <[email protected]>
ipvs: don't ignore errors in case refcounting ip_vs module fails
Martin Fuzzey <[email protected]>
net: phy: smsc: LAN8740: add PHY_RST_AFTER_CLK_EN flag
Magnus Karlsson <[email protected]>
xsk: Fix registration of Rx-only sockets
Navid Emamdoost <[email protected]>
drm/v3d: Fix memory leak in v3d_submit_cl_ioctl
Pablo Neira Ayuso <[email protected]>
netfilter: nf_flow_table: set timeout before insertion into hashes
Luca Coelho <[email protected]>
iwlwifi: pcie: 0x2720 is qu and 0x30DC is not
Luca Coelho <[email protected]>
iwlwifi: pcie: fix all 9460 entries for qnj
Luca Coelho <[email protected]>
iwlwifi: pcie: fix PCI ID 0x2720 configs that should be soc
Daniel Borkmann <[email protected]>
bpf: Fix use after free in bpf_get_prog_name
Himanshu Madhani <[email protected]>
scsi: qla2xxx: Initialized mailbox to prevent driver load failure
Daniel Wagner <[email protected]>
scsi: lpfc: Honor module parameter lpfc_use_adisc
Hillf Danton <[email protected]>
net: openvswitch: free vport unless register_netdevice() succeeds
yuqi jin <[email protected]>
net: stmmac: Fix the problem of tso_xmit
Daniel Borkmann <[email protected]>
bpf: Fix use after free in subprog's jited symbol removal
Dan Carpenter <[email protected]>
RDMA/uverbs: Prevent potential underflow
Eugeniy Paltsev <[email protected]>
ARC: [plat-hsdk]: Enable on-board SPI NOR flash IC
Avri Altman <[email protected]>
scsi: ufs-bsg: Wake the device before sending raw upiu commands
Daniel Wagner <[email protected]>
scsi: lpfc: Check queue pointer before use
Hannes Reinecke <[email protected]>
scsi: qla2xxx: fixup incorrect usage of host_byte
Jiri Benc <[email protected]>
selftests/bpf: More compatible nc options in test_tc_edt
Navid Emamdoost <[email protected]>
net/mlx5: fix memory leak in mlx5_fw_fatal_reporter_dump
Navid Emamdoost <[email protected]>
net/mlx5: prevent memory leak in mlx5_fpga_conn_create_cq
Tariq Toukan <[email protected]>
net/mlx5e: TX, Fix consumer index of error cqe dump
Tariq Toukan <[email protected]>
net/mlx5e: kTLS, Release reference on DUMPed fragments in shutdown flow
Tariq Toukan <[email protected]>
net/mlx5e: Tx, Fix assumption of single WQEBB of NOP in cleanup flow
Parav Pandit <[email protected]>
IB/core: Use rdma_read_gid_l2_fields to compare GID L2 fields
Kamal Heib <[email protected]>
RDMA/qedr: Fix reported firmware version
Krishnamraju Eraparaju <[email protected]>
RDMA/siw: free siw_base_qp in kref release routine
Potnuri Bharat Teja <[email protected]>
iw_cxgb4: fix ECN check on the passive accept
Rafi Wiener <[email protected]>
RDMA/mlx5: Clear old rate limit when closing QP
Christophe Leroy <[email protected]>
powerpc/32s: fix allow/prevent_user_access() when crossing segment boundaries.
Zhang Lixu <[email protected]>
HID: intel-ish-hid: fix wrong error handling in ishtp_cl_alloc_tx_ring()
Baolin Wang <[email protected]>
dmaengine: sprd: Fix the possible memory leak issue
Radhey Shyam Pandey <[email protected]>
dmaengine: xilinx_dma: Fix control reg update in vdma_channel_set_config
Radhey Shyam Pandey <[email protected]>
dmaengine: xilinx_dma: Fix 64-bit simple AXIDMA transfer
Jiri Benc <[email protected]>
bpf: lwtunnel: Fix reroute supplying invalid dst
Zhenfang Wang <[email protected]>
dmaengine: sprd: Fix the link-list pointer register configuration issue
Nicolas Boichat <[email protected]>
HID: google: add magnemite/masterball USB ids
Suwan Kim <[email protected]>
usbip: Implement SG support to vhci-hcd and stub driver
Takashi Iwai <[email protected]>
ALSA: usb-audio: Fix copy&paste error in the validator
Dan Carpenter <[email protected]>
ALSA: usb-audio: remove some dead code
Takashi Iwai <[email protected]>
ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()
Takashi Iwai <[email protected]>
ALSA: usb-audio: Clean up check_input_term()
Takashi Iwai <[email protected]>
ALSA: usb-audio: Remove superfluous bLength checks
Takashi Iwai <[email protected]>
ALSA: usb-audio: Unify the release of usb_mixer_elem_info objects
Takashi Iwai <[email protected]>
ALSA: usb-audio: Simplify parse_audio_unit()
Takashi Iwai <[email protected]>
ALSA: usb-audio: More validations of descriptor units
Al Viro <[email protected]>
configfs: fix a deadlock in configfs_symlink()
Johan Hovold <[email protected]>
can: peak_usb: fix slab info leak
Johan Hovold <[email protected]>
can: mcba_usb: fix use-after-free on disconnect
Wen Yang <[email protected]>
can: dev: add missing of_node_put() after calling of_get_child_by_name()
Navid Emamdoost <[email protected]>
can: gs_usb: gs_can_open(): prevent memory leak
Marc Kleine-Budde <[email protected]>
can: rx-offload: can_rx_offload_queue_sorted(): fix error handling, avoid skb mem leak
Stephane Grosjean <[email protected]>
can: peak_usb: fix a potential out-of-sync while decoding packets
Kurt Van Dijck <[email protected]>
can: c_can: c_can_poll(): only read status register after status IRQ
Joakim Zhang <[email protected]>
can: flexcan: disable completely the ECC mechanism
Johan Hovold <[email protected]>
can: usb_8dev: fix use-after-free on disconnect
Pavel Shilovsky <[email protected]>
SMB3: Fix persistent handles reconnect
Jan Beulich <[email protected]>
x86/apic/32: Avoid bogus LDR warnings
Thomas Gleixner <[email protected]>
x86/dumpstack/64: Don't evaluate exception stacks before setup
Alexander Shishkin <[email protected]>
intel_th: pci: Add Jasper Lake PCH support
Alexander Shishkin <[email protected]>
intel_th: pci: Add Comet Lake PCH support
Alexander Shishkin <[email protected]>
intel_th: gth: Fix the window switching sequence
Dan Carpenter <[email protected]>
netfilter: ipset: Fix an error code in ip_set_sockfn_get()
Lukas Wunner <[email protected]>
netfilter: nf_tables: Align nft_expr private data to 64-bit
Christian Brauner <[email protected]>
clone3: validate stack arguments
Srinivas Pandruvada <[email protected]>
cpufreq: intel_pstate: Fix invalid EPB setting
Adam Ford <[email protected]>
ARM: dts: imx6-logicpd: Re-enable SNVS power key
Ondrej Jirman <[email protected]>
ARM: sunxi: Fix CPU powerdown on A83T
Andreas Klinger <[email protected]>
iio: srf04: fix wrong limitation in distance measuring
Jean-Baptiste Maneyrol <[email protected]>
iio: imu: inv_mpu6050: fix no data on MPU6050
Alexandru Ardelean <[email protected]>
iio: imu: adis16480: make sure provided frequency is positive
Fabrice Gasnier <[email protected]>
iio: adc: stm32-adc: fix stopping dma
Luis Henriques <[email protected]>
ceph: don't allow copy_file_range when stripe_count != 1
Jeff Layton <[email protected]>
ceph: don't try to handle hashed dentries in non-O_CREAT atomic_open
Al Viro <[email protected]>
ceph: add missing check in d_revalidate snapdir handling
Al Viro <[email protected]>
ceph: fix RCU case handling in ceph_d_revalidate()
Luis Henriques <[email protected]>
ceph: fix use-after-free in __ceph_remove_cap()
Jiada Wang <[email protected]>
ASoC: rsnd: dma: fix SSI9 4/5/6/7 busif dma address
Catalin Marinas <[email protected]>
arm64: Do not mask out PTE_RDONLY in pte_same()
Tejun Heo <[email protected]>
blkcg: make blkcg_print_stat() print stats only for online blkgs
Bard Liao <[email protected]>
soundwire: bus: set initial value to port_status
Michal Suchanek <[email protected]>
soundwire: depend on ACPI || OF
Michal Suchanek <[email protected]>
soundwire: depend on ACPI
Ville Syrjälä <[email protected]>
mm/khugepaged: fix might_sleep() warn with CONFIG_HIGHPTE=y
Jason Gerecke <[email protected]>
HID: wacom: generic: Treat serial number and related fields as unsigned
Alex Deucher <[email protected]>
drm/radeon: fix si_enable_smc_cac() failed issue
John Keeping <[email protected]>
perf map: Use zalloc for map_groups
Jiri Olsa <[email protected]>
perf tools: Fix time sorting
Andy Shevchenko <[email protected]>
pinctrl: intel: Avoid potential glitches if pin is in GPIO mode
Shuah Khan <[email protected]>
tools: gpio: Use !building_out_of_srctree to determine srctree
Josef Bacik <[email protected]>
btrfs: save i_size to avoid double evaluation of i_size_read in compress_file_range
Qu Wenruo <[email protected]>
btrfs: tree-checker: Fix wrong check on max devid
Qu Wenruo <[email protected]>
btrfs: Consider system chunk array size for new SYSTEM chunks
Roman Gushchin <[email protected]>
mm: slab: make page_cgroup_ino() to recognize non-compound slab pages properly
Kevin Hao <[email protected]>
dump_stack: avoid the livelock of the dump_lock
Michal Hocko <[email protected]>
mm, vmstat: hide /proc/pagetypeinfo from normal users
Yang Shi <[email protected]>
mm: thp: handle page cache THP correctly in PageTransCompoundMap
Mel Gorman <[email protected]>
mm, meminit: recalculate pcpu batch and high limits after init completes
Johannes Weiner <[email protected]>
mm: memcontrol: fix network errors from failing __GFP_ATOMIC charges
Shakeel Butt <[email protected]>
mm: memcontrol: fix NULL-ptr deref in percpu stats flush
Takashi Iwai <[email protected]>
ALSA: hda/ca0132 - Fix possible workqueue stall
Takashi Sakamoto <[email protected]>
ALSA: bebob: fix to detect configured source of sampling clock for Focusrite Saffire Pro i/o series
Takashi Iwai <[email protected]>
ALSA: timer: Fix incorrectly assigned timer instance
Heiner Kallweit <[email protected]>
r8169: fix page read in r8168g_mdio_read
Stefano Garzarella <[email protected]>
vsock/virtio: fix sock refcnt holding during the shutdown
Ursula Braun <[email protected]>
net/smc: fix ethernet interface refcounting
John Hurley <[email protected]>
net: sched: prevent duplicate flower rules from tcf_proto destroy race
Eric Dumazet <[email protected]>
net: prevent load/store tearing on sk->sk_stamp
Salil Mehta <[email protected]>
net: hns: Fix the stray netpoll locks causing deadlock in NAPI path
Eric Dumazet <[email protected]>
ipv6: fixes rt6_probe() and fib6_nh->last_probe init
Jakub Kicinski <[email protected]>
selftests/tls: add test for concurrent recv and send
Jakub Kicinski <[email protected]>
net/tls: add a TX lock
Jakub Kicinski <[email protected]>
net/tls: don't pay attention to sk_write_pending when pushing partial records
Claudiu Manoil <[email protected]>
net: mscc: ocelot: fix NULL pointer on LAG slave removal
Claudiu Manoil <[email protected]>
net: mscc: ocelot: don't handle netdev events for other netdevs
Manish Chopra <[email protected]>
qede: fix NULL pointer deref in __qede_remove()
Pan Bian <[email protected]>
NFC: st21nfca: fix double free
Pan Bian <[email protected]>
nfc: netlink: fix double device reference drop
Pan Bian <[email protected]>
NFC: fdp: fix incorrect free object
Aleksander Morgado <[email protected]>
net: usb: qmi_wwan: add support for DW5821e with eSIM support
Jakub Kicinski <[email protected]>
net/tls: fix sk_msg trim on fallback to copy mode
Sean Tranchetti <[email protected]>
net: qualcomm: rmnet: Fix potential UAF when unregistering
Eric Dumazet <[email protected]>
net: fix data-race in neigh_event_send()
Alexander Sverdlin <[email protected]>
net: ethernet: octeon_mgmt: Account for second possible VLAN header
David Ahern <[email protected]>
ipv4: Fix table id reference in fib_sync_down_addr
Oliver Neukum <[email protected]>
CDC-NCM: handle incomplete transfer of MTU
Jay Vosburgh <[email protected]>
bonding: fix state transition issue in link monitoring
-------------
Diffstat:
Documentation/arm64/silicon-errata.rst | 7 +-
Makefile | 4 +-
arch/arc/boot/dts/hsdk.dts | 8 +
arch/arc/configs/hsdk_defconfig | 2 +
arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi | 4 +
arch/arm/mach-sunxi/mc_smp.c | 6 +-
arch/arm64/include/asm/cputype.h | 2 +
arch/arm64/include/asm/pgtable.h | 17 -
arch/arm64/include/asm/vdso/vsyscall.h | 7 -
arch/arm64/kernel/cpu_errata.c | 58 +-
arch/powerpc/include/asm/book3s/32/kup.h | 1 +
arch/x86/boot/compressed/eboot.c | 4 +-
arch/x86/events/amd/ibs.c | 8 +-
arch/x86/events/intel/uncore.c | 44 +-
arch/x86/events/intel/uncore.h | 12 -
arch/x86/kernel/apic/apic.c | 28 +-
arch/x86/kernel/dumpstack_64.c | 7 +
block/blk-cgroup.c | 13 +-
drivers/clk/imx/clk-imx8mm.c | 2 +-
drivers/cpufreq/intel_pstate.c | 4 +-
drivers/dma/sprd-dma.c | 27 +-
drivers/dma/xilinx/xilinx_dma.c | 10 +-
drivers/firmware/efi/libstub/Makefile | 1 +
drivers/firmware/efi/libstub/arm32-stub.c | 16 +-
drivers/firmware/efi/libstub/efi-stub-helper.c | 24 +-
drivers/firmware/efi/tpm.c | 1 +
drivers/gpu/drm/amd/amdgpu/amdgpu_job.c | 4 +-
drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c | 1 +
drivers/gpu/drm/amd/display/dc/core/dc.c | 4 +
drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c | 24 +-
drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 6 +
.../amd/display/dc/dml/dcn20/display_mode_vba_20.c | 3 +-
drivers/gpu/drm/radeon/si_dpm.c | 1 +
drivers/gpu/drm/scheduler/sched_main.c | 19 +-
drivers/gpu/drm/v3d/v3d_gem.c | 5 +-
drivers/hid/hid-google-hammer.c | 4 +
drivers/hid/hid-ids.h | 2 +
drivers/hid/intel-ish-hid/ishtp/client-buffers.c | 2 +-
drivers/hid/wacom.h | 15 +
drivers/hid/wacom_wac.c | 10 +-
drivers/hwmon/ina3221.c | 2 +-
drivers/hwtracing/intel_th/gth.c | 3 +
drivers/hwtracing/intel_th/pci.c | 10 +
drivers/iio/adc/stm32-adc.c | 4 +-
drivers/iio/imu/adis16480.c | 5 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 9 +
drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 2 +
drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 15 +-
drivers/iio/proximity/srf04.c | 29 +-
drivers/infiniband/core/nldev.c | 2 +-
drivers/infiniband/core/uverbs.h | 2 +-
drivers/infiniband/core/verbs.c | 9 +-
drivers/infiniband/hw/cxgb4/cm.c | 30 +-
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 6 +-
drivers/infiniband/hw/mlx5/qp.c | 8 +-
drivers/infiniband/hw/qedr/main.c | 2 +-
drivers/infiniband/sw/siw/siw_qp.c | 2 +
drivers/infiniband/sw/siw/siw_verbs.c | 2 -
drivers/iommu/amd_iommu_quirks.c | 13 +
drivers/net/bonding/bond_main.c | 60 +-
drivers/net/can/c_can/c_can.c | 25 +-
drivers/net/can/c_can/c_can.h | 1 +
drivers/net/can/dev.c | 1 +
drivers/net/can/flexcan.c | 1 +
drivers/net/can/rx-offload.c | 6 +-
drivers/net/can/usb/gs_usb.c | 1 +
drivers/net/can/usb/mcba_usb.c | 3 +-
drivers/net/can/usb/peak_usb/pcan_usb.c | 17 +-
drivers/net/can/usb/peak_usb/pcan_usb_core.c | 2 +-
drivers/net/can/usb/usb_8dev.c | 3 +-
drivers/net/ethernet/arc/emac_rockchip.c | 3 +
drivers/net/ethernet/cavium/octeon/octeon_mgmt.c | 2 +-
drivers/net/ethernet/google/gve/gve_rx.c | 2 +
drivers/net/ethernet/google/gve/gve_tx.c | 24 +-
drivers/net/ethernet/hisilicon/hip04_eth.c | 1 -
drivers/net/ethernet/hisilicon/hns/hnae.c | 1 -
drivers/net/ethernet/hisilicon/hns/hnae.h | 3 -
drivers/net/ethernet/hisilicon/hns/hns_enet.c | 22 +-
drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 7 +-
drivers/net/ethernet/intel/igb/igb_main.c | 3 +-
.../ethernet/mellanox/mlx5/core/en_accel/ktls.h | 7 +-
.../ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c | 11 +-
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 6 +-
drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 35 +-
.../net/ethernet/mellanox/mlx5/core/fpga/conn.c | 4 +-
drivers/net/ethernet/mellanox/mlx5/core/health.c | 2 +-
drivers/net/ethernet/mscc/ocelot.c | 20 +-
drivers/net/ethernet/qlogic/qede/qede_main.c | 12 +-
drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c | 4 +-
drivers/net/ethernet/realtek/r8169_main.c | 3 +
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 1 +
drivers/net/fjes/fjes_main.c | 15 +-
drivers/net/hyperv/netvsc_drv.c | 9 +-
drivers/net/macsec.c | 4 -
drivers/net/phy/smsc.c | 1 +
drivers/net/usb/cdc_ncm.c | 6 +-
drivers/net/usb/qmi_wwan.c | 1 +
drivers/net/wimax/i2400m/op-rfkill.c | 2 +-
drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 125 ++--
drivers/net/wireless/mediatek/mt76/dma.c | 6 +-
drivers/net/wireless/mediatek/mt76/mt76.h | 5 +-
drivers/net/wireless/virt_wifi.c | 54 +-
drivers/nfc/fdp/i2c.c | 2 +-
drivers/nfc/st21nfca/core.c | 1 +
drivers/nvme/host/multipath.c | 2 +-
drivers/pinctrl/intel/pinctrl-cherryview.c | 2 +-
drivers/pinctrl/intel/pinctrl-intel.c | 21 +-
drivers/scsi/lpfc/lpfc_nportdisc.c | 4 +-
drivers/scsi/lpfc/lpfc_sli.c | 2 +-
drivers/scsi/qla2xxx/qla_bsg.c | 6 +-
drivers/scsi/qla2xxx/qla_mbx.c | 3 +-
drivers/scsi/qla2xxx/qla_os.c | 4 +
drivers/scsi/sd.c | 3 +-
drivers/scsi/ufs/ufs_bsg.c | 4 +
drivers/soundwire/Kconfig | 1 +
drivers/soundwire/bus.c | 2 +-
drivers/usb/core/config.c | 5 +
drivers/usb/dwc3/Kconfig | 1 +
drivers/usb/dwc3/core.c | 3 +-
drivers/usb/dwc3/dwc3-pci.c | 2 +-
drivers/usb/dwc3/gadget.c | 6 +
drivers/usb/gadget/composite.c | 4 +
drivers/usb/gadget/configfs.c | 110 +++-
drivers/usb/gadget/udc/atmel_usba_udc.c | 6 +-
drivers/usb/gadget/udc/fsl_udc_core.c | 2 +-
drivers/usb/misc/ldusb.c | 7 +-
drivers/usb/usbip/stub.h | 7 +-
drivers/usb/usbip/stub_main.c | 57 +-
drivers/usb/usbip/stub_rx.c | 204 +++++--
drivers/usb/usbip/stub_tx.c | 99 +++-
drivers/usb/usbip/usbip_common.c | 59 +-
drivers/usb/usbip/vhci_hcd.c | 12 +-
drivers/usb/usbip/vhci_rx.c | 3 +
drivers/usb/usbip/vhci_tx.c | 66 ++-
fs/btrfs/inode.c | 15 +-
fs/btrfs/tree-checker.c | 8 -
fs/btrfs/volumes.c | 1 +
fs/ceph/caps.c | 10 +-
fs/ceph/dir.c | 15 +-
fs/ceph/file.c | 15 +-
fs/ceph/inode.c | 1 +
fs/cifs/smb2pdu.h | 1 +
fs/configfs/symlink.c | 33 +-
fs/fs-writeback.c | 9 +-
fs/nfs/delegation.c | 10 +
fs/nfs/delegation.h | 1 +
fs/nfs/nfs4proc.c | 7 +-
fs/ocfs2/file.c | 134 +++--
include/asm-generic/vdso/vsyscall.h | 7 -
include/linux/efi.h | 18 +-
include/linux/filter.h | 1 -
include/linux/mm.h | 5 -
include/linux/mm_types.h | 5 +
include/linux/page-flags.h | 20 +-
include/linux/skmsg.h | 9 +-
include/linux/sunrpc/bc_xprt.h | 5 +
include/net/bonding.h | 4 +-
include/net/ip_vs.h | 1 +
include/net/neighbour.h | 4 +-
include/net/netfilter/nf_tables.h | 3 +-
include/net/sch_generic.h | 4 +
include/net/sock.h | 4 +-
include/net/tls.h | 5 +
include/rdma/ib_verbs.h | 2 +-
kernel/bpf/core.c | 2 +-
kernel/bpf/syscall.c | 31 +-
kernel/cgroup/cpuset.c | 3 +-
kernel/fork.c | 33 +-
kernel/sched/topology.c | 11 +-
kernel/time/vsyscall.c | 9 +-
lib/dump_stack.c | 7 +-
mm/filemap.c | 3 +-
mm/khugepaged.c | 7 +-
mm/memcontrol.c | 23 +-
mm/page_alloc.c | 10 +-
mm/slab.h | 4 +-
mm/vmstat.c | 2 +-
net/core/lwt_bpf.c | 7 +-
net/core/skmsg.c | 20 +-
net/ipv4/fib_semantics.c | 2 +-
net/ipv6/route.c | 13 +-
net/netfilter/ipset/ip_set_core.c | 8 +-
net/netfilter/ipvs/ip_vs_app.c | 12 +-
net/netfilter/ipvs/ip_vs_ctl.c | 29 +-
net/netfilter/ipvs/ip_vs_pe.c | 3 +-
net/netfilter/ipvs/ip_vs_sched.c | 3 +-
net/netfilter/ipvs/ip_vs_sync.c | 13 +-
net/netfilter/nf_flow_table_core.c | 3 +-
net/netfilter/nft_payload.c | 38 ++
net/nfc/netlink.c | 2 -
net/openvswitch/vport-internal_dev.c | 11 +-
net/sched/cls_api.c | 83 ++-
net/smc/smc_pnet.c | 2 -
net/sunrpc/backchannel_rqst.c | 7 +-
net/sunrpc/xprt.c | 5 +
net/sunrpc/xprtrdma/backchannel.c | 2 +
net/tls/tls_device.c | 10 +-
net/tls/tls_main.c | 2 +
net/tls/tls_sw.c | 30 +-
net/vmw_vsock/virtio_transport_common.c | 8 +-
net/xdp/xdp_umem.c | 6 +
sound/core/timer.c | 6 +-
sound/firewire/bebob/bebob_focusrite.c | 3 +
sound/pci/hda/patch_ca0132.c | 2 +-
sound/soc/sh/rcar/dma.c | 4 +-
sound/usb/Makefile | 3 +-
sound/usb/clock.c | 14 +-
sound/usb/helper.h | 4 +
sound/usb/mixer.c | 633 +++++++++------------
sound/usb/power.c | 2 +
sound/usb/quirks.c | 3 +
sound/usb/stream.c | 25 +-
sound/usb/validate.c | 332 +++++++++++
tools/gpio/Makefile | 6 +-
tools/perf/util/hist.c | 2 +-
tools/perf/util/map.c | 2 +-
tools/testing/selftests/bpf/test_tc_edt.sh | 2 +-
tools/testing/selftests/net/tls.c | 108 ++++
tools/usb/usbip/libsrc/usbip_device_driver.c | 6 +-
219 files changed, 2661 insertions(+), 1120 deletions(-)
From: Qu Wenruo <[email protected]>
commit c17add7a1c61a15578e4071ed7bfd460fd041c43 upstream.
For SYSTEM chunks, despite the regular chunk item size limit, there is
another limit due to system chunk array size.
The extra limit was removed in a refactoring, so add it back.
Fixes: e3ecdb3fdecf ("btrfs: factor out devs_max setting in __btrfs_alloc_chunk")
CC: [email protected] # 5.3+
Reviewed-by: Nikolay Borisov <[email protected]>
Reviewed-by: Anand Jain <[email protected]>
Signed-off-by: Qu Wenruo <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/volumes.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -4976,6 +4976,7 @@ static int __btrfs_alloc_chunk(struct bt
} else if (type & BTRFS_BLOCK_GROUP_SYSTEM) {
max_stripe_size = SZ_32M;
max_chunk_size = 2 * max_stripe_size;
+ devs_max = min_t(int, devs_max, BTRFS_MAX_DEVS_SYS_CHUNK);
} else {
btrfs_err(info, "invalid chunk type 0x%llx requested",
type);
From: Qu Wenruo <[email protected]>
commit 8bb177d18f114358a57d8ae7e206861b48b8b4de upstream.
[BUG]
The following script will cause false alert on devid check.
#!/bin/bash
dev1=/dev/test/test
dev2=/dev/test/scratch1
mnt=/mnt/btrfs
umount $dev1 &> /dev/null
umount $dev2 &> /dev/null
umount $mnt &> /dev/null
mkfs.btrfs -f $dev1
mount $dev1 $mnt
_fail()
{
echo "!!! FAILED !!!"
exit 1
}
for ((i = 0; i < 4096; i++)); do
btrfs dev add -f $dev2 $mnt || _fail
btrfs dev del $dev1 $mnt || _fail
dev_tmp=$dev1
dev1=$dev2
dev2=$dev_tmp
done
[CAUSE]
Tree-checker uses BTRFS_MAX_DEVS() and BTRFS_MAX_DEVS_SYS_CHUNK() as
upper limit for devid. But we can have devid holes just like above
script.
So the check for devid is incorrect and could cause false alert.
[FIX]
Just remove the whole devid check. We don't have any hard requirement
for devid assignment.
Furthermore, even devid could get corrupted by a bitflip, we still have
dev extents verification at mount time, so corrupted data won't sneak
in.
This fixes fstests btrfs/194.
Reported-by: Anand Jain <[email protected]>
Fixes: ab4ba2e13346 ("btrfs: tree-checker: Verify dev item")
CC: [email protected] # 5.2+
Signed-off-by: Qu Wenruo <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/tree-checker.c | 8 --------
1 file changed, 8 deletions(-)
--- a/fs/btrfs/tree-checker.c
+++ b/fs/btrfs/tree-checker.c
@@ -686,9 +686,7 @@ static void dev_item_err(const struct ex
static int check_dev_item(struct extent_buffer *leaf,
struct btrfs_key *key, int slot)
{
- struct btrfs_fs_info *fs_info = leaf->fs_info;
struct btrfs_dev_item *ditem;
- u64 max_devid = max(BTRFS_MAX_DEVS(fs_info), BTRFS_MAX_DEVS_SYS_CHUNK);
if (key->objectid != BTRFS_DEV_ITEMS_OBJECTID) {
dev_item_err(leaf, slot,
@@ -696,12 +694,6 @@ static int check_dev_item(struct extent_
key->objectid, BTRFS_DEV_ITEMS_OBJECTID);
return -EUCLEAN;
}
- if (key->offset > max_devid) {
- dev_item_err(leaf, slot,
- "invalid devid: has=%llu expect=[0, %llu]",
- key->offset, max_devid);
- return -EUCLEAN;
- }
ditem = btrfs_item_ptr(leaf, slot, struct btrfs_dev_item);
if (btrfs_device_id(leaf, ditem) != key->offset) {
dev_item_err(leaf, slot,
From: Josef Bacik <[email protected]>
commit d98da49977f67394db492f06c00b1fb1cc090c05 upstream.
We hit a regression while rolling out 5.2 internally where we were
hitting the following panic
kernel BUG at mm/page-writeback.c:2659!
RIP: 0010:clear_page_dirty_for_io+0xe6/0x1f0
Call Trace:
__process_pages_contig+0x25a/0x350
? extent_clear_unlock_delalloc+0x43/0x70
submit_compressed_extents+0x359/0x4d0
normal_work_helper+0x15a/0x330
process_one_work+0x1f5/0x3f0
worker_thread+0x2d/0x3d0
? rescuer_thread+0x340/0x340
kthread+0x111/0x130
? kthread_create_on_node+0x60/0x60
ret_from_fork+0x1f/0x30
This is happening because the page is not locked when doing
clear_page_dirty_for_io. Looking at the core dump it was because our
async_extent had a ram_size of 24576 but our async_chunk range only
spanned 20480, so we had a whole extra page in our ram_size for our
async_extent.
This happened because we try not to compress pages outside of our
i_size, however a cleanup patch changed us to do
actual_end = min_t(u64, i_size_read(inode), end + 1);
which is problematic because i_size_read() can evaluate to different
values in between checking and assigning. So either an expanding
truncate or a fallocate could increase our i_size while we're doing
writeout and actual_end would end up being past the range we have
locked.
I confirmed this was what was happening by installing a debug kernel
that had
actual_end = min_t(u64, i_size_read(inode), end + 1);
if (actual_end > end + 1) {
printk(KERN_ERR "KABOOM\n");
actual_end = end + 1;
}
and installing it onto 500 boxes of the tier that had been seeing the
problem regularly. Last night I got my debug message and no panic,
confirming what I expected.
[ dsterba: the assembly confirms a tiny race window:
mov 0x20(%rsp),%rax
cmp %rax,0x48(%r15) # read
movl $0x0,0x18(%rsp)
mov %rax,%r12
mov %r14,%rax
cmovbe 0x48(%r15),%r12 # eval
Where r15 is inode and 0x48 is offset of i_size.
The original fix was to revert 62b37622718c that would do an
intermediate assignment and this would also avoid the doulble
evaluation but is not future-proof, should the compiler merge the
stores and call i_size_read anyway.
There's a patch adding READ_ONCE to i_size_read but that's not being
applied at the moment and we need to fix the bug. Instead, emulate
READ_ONCE by two barrier()s that's what effectively happens. The
assembly confirms single evaluation:
mov 0x48(%rbp),%rax # read once
mov 0x20(%rsp),%rcx
mov $0x20,%edx
cmp %rax,%rcx
cmovbe %rcx,%rax
mov %rax,(%rsp)
mov %rax,%rcx
mov %r14,%rax
Where 0x48(%rbp) is inode->i_size stored to %eax.
]
Fixes: 62b37622718c ("btrfs: Remove isize local variable in compress_file_range")
CC: [email protected] # v5.1+
Reviewed-by: Filipe Manana <[email protected]>
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
[ changelog updated ]
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/inode.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -472,6 +472,7 @@ static noinline void compress_file_range
u64 start = async_chunk->start;
u64 end = async_chunk->end;
u64 actual_end;
+ u64 i_size;
int ret = 0;
struct page **pages = NULL;
unsigned long nr_pages;
@@ -485,7 +486,19 @@ static noinline void compress_file_range
inode_should_defrag(BTRFS_I(inode), start, end, end - start + 1,
SZ_16K);
- actual_end = min_t(u64, i_size_read(inode), end + 1);
+ /*
+ * We need to save i_size before now because it could change in between
+ * us evaluating the size and assigning it. This is because we lock and
+ * unlock the page in truncate and fallocate, and then modify the i_size
+ * later on.
+ *
+ * The barriers are to emulate READ_ONCE, remove that once i_size_read
+ * does that for us.
+ */
+ barrier();
+ i_size = i_size_read(inode);
+ barrier();
+ actual_end = min_t(u64, i_size, end + 1);
again:
will_compress = 0;
nr_pages = (end >> PAGE_SHIFT) - (start >> PAGE_SHIFT) + 1;
From: Andy Shevchenko <[email protected]>
commit 29c2c6aa32405dfee4a29911a51ba133edcedb0f upstream.
When consumer requests a pin, in order to be on the safest side,
we switch it first to GPIO mode followed by immediate transition
to the input state. Due to posted writes it's luckily to be a single
I/O transaction.
However, if firmware or boot loader already configures the pin
to the GPIO mode, user expects no glitches for the requested pin.
We may check if the pin is pre-configured and leave it as is
till the actual consumer toggles its state to avoid glitches.
Fixes: 7981c0015af2 ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support")
Depends-on: f5a26acf0162 ("pinctrl: intel: Initialize GPIO properly when used through irqchip")
Cc: [email protected]
Cc: [email protected]
Reported-by: Oliver Barta <[email protected]>
Reported-by: Malin Jonsson <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Mika Westerberg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/intel/pinctrl-intel.c | 21 ++++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)
--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -52,6 +52,7 @@
#define PADCFG0_GPIROUTNMI BIT(17)
#define PADCFG0_PMODE_SHIFT 10
#define PADCFG0_PMODE_MASK GENMASK(13, 10)
+#define PADCFG0_PMODE_GPIO 0
#define PADCFG0_GPIORXDIS BIT(9)
#define PADCFG0_GPIOTXDIS BIT(8)
#define PADCFG0_GPIORXSTATE BIT(1)
@@ -307,7 +308,7 @@ static void intel_pin_dbg_show(struct pi
cfg1 = readl(intel_get_padcfg(pctrl, pin, PADCFG1));
mode = (cfg0 & PADCFG0_PMODE_MASK) >> PADCFG0_PMODE_SHIFT;
- if (!mode)
+ if (mode == PADCFG0_PMODE_GPIO)
seq_puts(s, "GPIO ");
else
seq_printf(s, "mode %d ", mode);
@@ -428,6 +429,11 @@ static void __intel_gpio_set_direction(v
writel(value, padcfg0);
}
+static int intel_gpio_get_gpio_mode(void __iomem *padcfg0)
+{
+ return (readl(padcfg0) & PADCFG0_PMODE_MASK) >> PADCFG0_PMODE_SHIFT;
+}
+
static void intel_gpio_set_gpio_mode(void __iomem *padcfg0)
{
u32 value;
@@ -456,7 +462,20 @@ static int intel_gpio_request_enable(str
}
padcfg0 = intel_get_padcfg(pctrl, pin, PADCFG0);
+
+ /*
+ * If pin is already configured in GPIO mode, we assume that
+ * firmware provides correct settings. In such case we avoid
+ * potential glitches on the pin. Otherwise, for the pin in
+ * alternative mode, consumer has to supply respective flags.
+ */
+ if (intel_gpio_get_gpio_mode(padcfg0) == PADCFG0_PMODE_GPIO) {
+ raw_spin_unlock_irqrestore(&pctrl->lock, flags);
+ return 0;
+ }
+
intel_gpio_set_gpio_mode(padcfg0);
+
/* Disable TX buffer and enable RX (this will be input) */
__intel_gpio_set_direction(padcfg0, true);
From: Eric Dumazet <[email protected]>
[ Upstream commit 1bef4c223b8588cf50433bdc2c6953d82949b3b3 ]
While looking at a syzbot KCSAN report [1], I found multiple
issues in this code :
1) fib6_nh->last_probe has an initial value of 0.
While probably okay on 64bit kernels, this causes an issue
on 32bit kernels since the time_after(jiffies, 0 + interval)
might be false ~24 days after boot (for HZ=1000)
2) The data-race found by KCSAN
I could use READ_ONCE() and WRITE_ONCE(), but we also can
take the opportunity of not piling-up too many rt6_probe_deferred()
works by using instead cmpxchg() so that only one cpu wins the race.
[1]
BUG: KCSAN: data-race in find_match / find_match
write to 0xffff8880bb7aabe8 of 8 bytes by interrupt on cpu 1:
rt6_probe net/ipv6/route.c:663 [inline]
find_match net/ipv6/route.c:757 [inline]
find_match+0x5bd/0x790 net/ipv6/route.c:733
__find_rr_leaf+0xe3/0x780 net/ipv6/route.c:831
find_rr_leaf net/ipv6/route.c:852 [inline]
rt6_select net/ipv6/route.c:896 [inline]
fib6_table_lookup+0x383/0x650 net/ipv6/route.c:2164
ip6_pol_route+0xee/0x5c0 net/ipv6/route.c:2200
ip6_pol_route_output+0x48/0x60 net/ipv6/route.c:2452
fib6_rule_lookup+0x3d6/0x470 net/ipv6/fib6_rules.c:117
ip6_route_output_flags_noref+0x16b/0x230 net/ipv6/route.c:2484
ip6_route_output_flags+0x50/0x1a0 net/ipv6/route.c:2497
ip6_dst_lookup_tail+0x25d/0xc30 net/ipv6/ip6_output.c:1049
ip6_dst_lookup_flow+0x68/0x120 net/ipv6/ip6_output.c:1150
inet6_csk_route_socket+0x2f7/0x420 net/ipv6/inet6_connection_sock.c:106
inet6_csk_xmit+0x91/0x1f0 net/ipv6/inet6_connection_sock.c:121
__tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline]
tcp_xmit_probe_skb+0x19b/0x1d0 net/ipv4/tcp_output.c:3735
read to 0xffff8880bb7aabe8 of 8 bytes by interrupt on cpu 0:
rt6_probe net/ipv6/route.c:657 [inline]
find_match net/ipv6/route.c:757 [inline]
find_match+0x521/0x790 net/ipv6/route.c:733
__find_rr_leaf+0xe3/0x780 net/ipv6/route.c:831
find_rr_leaf net/ipv6/route.c:852 [inline]
rt6_select net/ipv6/route.c:896 [inline]
fib6_table_lookup+0x383/0x650 net/ipv6/route.c:2164
ip6_pol_route+0xee/0x5c0 net/ipv6/route.c:2200
ip6_pol_route_output+0x48/0x60 net/ipv6/route.c:2452
fib6_rule_lookup+0x3d6/0x470 net/ipv6/fib6_rules.c:117
ip6_route_output_flags_noref+0x16b/0x230 net/ipv6/route.c:2484
ip6_route_output_flags+0x50/0x1a0 net/ipv6/route.c:2497
ip6_dst_lookup_tail+0x25d/0xc30 net/ipv6/ip6_output.c:1049
ip6_dst_lookup_flow+0x68/0x120 net/ipv6/ip6_output.c:1150
inet6_csk_route_socket+0x2f7/0x420 net/ipv6/inet6_connection_sock.c:106
inet6_csk_xmit+0x91/0x1f0 net/ipv6/inet6_connection_sock.c:121
__tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 18894 Comm: udevd Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: cc3a86c802f0 ("ipv6: Change rt6_probe to take a fib6_nh")
Fixes: f547fac624be ("ipv6: rate-limit probes for neighbourless routes")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/route.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -621,6 +621,7 @@ static void rt6_probe(struct fib6_nh *fi
{
struct __rt6_probe_work *work = NULL;
const struct in6_addr *nh_gw;
+ unsigned long last_probe;
struct neighbour *neigh;
struct net_device *dev;
struct inet6_dev *idev;
@@ -639,6 +640,7 @@ static void rt6_probe(struct fib6_nh *fi
nh_gw = &fib6_nh->fib_nh_gw6;
dev = fib6_nh->fib_nh_dev;
rcu_read_lock_bh();
+ last_probe = READ_ONCE(fib6_nh->last_probe);
idev = __in6_dev_get(dev);
neigh = __ipv6_neigh_lookup_noref(dev, nh_gw);
if (neigh) {
@@ -654,13 +656,15 @@ static void rt6_probe(struct fib6_nh *fi
__neigh_set_probe_once(neigh);
}
write_unlock(&neigh->lock);
- } else if (time_after(jiffies, fib6_nh->last_probe +
+ } else if (time_after(jiffies, last_probe +
idev->cnf.rtr_probe_interval)) {
work = kmalloc(sizeof(*work), GFP_ATOMIC);
}
- if (work) {
- fib6_nh->last_probe = jiffies;
+ if (!work || cmpxchg(&fib6_nh->last_probe,
+ last_probe, jiffies) != last_probe) {
+ kfree(work);
+ } else {
INIT_WORK(&work->work, rt6_probe_deferred);
work->target = *nh_gw;
dev_hold(dev);
@@ -3385,6 +3389,9 @@ int fib6_nh_init(struct net *net, struct
int err;
fib6_nh->fib_nh_family = AF_INET6;
+#ifdef CONFIG_IPV6_ROUTER_PREF
+ fib6_nh->last_probe = jiffies;
+#endif
err = -ENODEV;
if (cfg->fc_ifindex) {
From: Heiner Kallweit <[email protected]>
[ Upstream commit 9c6850fea3edefef6e7153b2c466f09155399882 ]
Functions like phy_modify_paged() read the current page, on Realtek
PHY's this means reading the value of register 0x1f. Add special
handling for reading this register, similar to what we do already
in r8168g_mdio_write(). Currently we read a random value that by
chance seems to be 0 always.
Fixes: a2928d28643e ("r8169: use paged versions of phylib MDIO access functions")
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/realtek/r8169_main.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -863,6 +863,9 @@ static void r8168g_mdio_write(struct rtl
static int r8168g_mdio_read(struct rtl8169_private *tp, int reg)
{
+ if (reg == 0x1f)
+ return tp->ocp_base == OCP_STD_PHY_BASE ? 0 : tp->ocp_base >> 4;
+
if (tp->ocp_base != OCP_STD_PHY_BASE)
reg -= 0x10;
From: Salil Mehta <[email protected]>
[ Upstream commit bf5a6b4c474c589244dc25ee1af2c3c829228ef8 ]
This patch fixes the problem of the spin locks, originally
meant for the netpoll path of hns driver, causing deadlock in
the normal NAPI poll path. The issue happened due to the presence
of the stray leftover spin lock code related to the netpoll,
whose support was earlier removed from the HNS[1], got activated
due to enabling of NET_POLL_CONTROLLER switch.
Earlier background:
The netpoll handling code originally had this bug(as identified
by Marc Zyngier[2]) of wrong spin lock API being used which did
not disable the interrupts and hence could cause locking issues.
i.e. if the lock were first acquired in context to thread like
'ip' util and this lock if ever got later acquired again in
context to the interrupt context like TX/RX (Interrupts could
always pre-empt the lock holding task and acquire the lock again)
and hence could cause deadlock.
Proposed Solution:
1. If the netpoll was enabled in the HNS driver, which is not
right now, we could have simply used spin_[un]lock_irqsave()
2. But as netpoll is disabled, therefore, it is best to get rid
of the existing locks and stray code for now. This should
solve the problem reported by Marc.
[1] https://git.kernel.org/torvalds/c/4bd2c03be7
[2] https://patchwork.ozlabs.org/patch/1189139/
Fixes: 4bd2c03be707 ("net: hns: remove ndo_poll_controller")
Cc: lipeng <[email protected]>
Cc: Yisen Zhuang <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: David S. Miller <[email protected]>
Reported-by: Marc Zyngier <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Signed-off-by: Salil Mehta <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/hisilicon/hns/hnae.c | 1 -
drivers/net/ethernet/hisilicon/hns/hnae.h | 3 ---
drivers/net/ethernet/hisilicon/hns/hns_enet.c | 22 +---------------------
3 files changed, 1 insertion(+), 25 deletions(-)
--- a/drivers/net/ethernet/hisilicon/hns/hnae.c
+++ b/drivers/net/ethernet/hisilicon/hns/hnae.c
@@ -199,7 +199,6 @@ hnae_init_ring(struct hnae_queue *q, str
ring->q = q;
ring->flags = flags;
- spin_lock_init(&ring->lock);
ring->coal_param = q->handle->coal_param;
assert(!ring->desc && !ring->desc_cb && !ring->desc_dma_addr);
--- a/drivers/net/ethernet/hisilicon/hns/hnae.h
+++ b/drivers/net/ethernet/hisilicon/hns/hnae.h
@@ -274,9 +274,6 @@ struct hnae_ring {
/* statistic */
struct ring_stats stats;
- /* ring lock for poll one */
- spinlock_t lock;
-
dma_addr_t desc_dma_addr;
u32 buf_size; /* size for hnae_desc->addr, preset by AE */
u16 desc_num; /* total number of desc */
--- a/drivers/net/ethernet/hisilicon/hns/hns_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns/hns_enet.c
@@ -943,15 +943,6 @@ static int is_valid_clean_head(struct hn
return u > c ? (h > c && h <= u) : (h > c || h <= u);
}
-/* netif_tx_lock will turn down the performance, set only when necessary */
-#ifdef CONFIG_NET_POLL_CONTROLLER
-#define NETIF_TX_LOCK(ring) spin_lock(&(ring)->lock)
-#define NETIF_TX_UNLOCK(ring) spin_unlock(&(ring)->lock)
-#else
-#define NETIF_TX_LOCK(ring)
-#define NETIF_TX_UNLOCK(ring)
-#endif
-
/* reclaim all desc in one budget
* return error or number of desc left
*/
@@ -965,21 +956,16 @@ static int hns_nic_tx_poll_one(struct hn
int head;
int bytes, pkts;
- NETIF_TX_LOCK(ring);
-
head = readl_relaxed(ring->io_base + RCB_REG_HEAD);
rmb(); /* make sure head is ready before touch any data */
- if (is_ring_empty(ring) || head == ring->next_to_clean) {
- NETIF_TX_UNLOCK(ring);
+ if (is_ring_empty(ring) || head == ring->next_to_clean)
return 0; /* no data to poll */
- }
if (!is_valid_clean_head(ring, head)) {
netdev_err(ndev, "wrong head (%d, %d-%d)\n", head,
ring->next_to_use, ring->next_to_clean);
ring->stats.io_err_cnt++;
- NETIF_TX_UNLOCK(ring);
return -EIO;
}
@@ -994,8 +980,6 @@ static int hns_nic_tx_poll_one(struct hn
ring->stats.tx_pkts += pkts;
ring->stats.tx_bytes += bytes;
- NETIF_TX_UNLOCK(ring);
-
dev_queue = netdev_get_tx_queue(ndev, ring_data->queue_index);
netdev_tx_completed_queue(dev_queue, pkts, bytes);
@@ -1055,16 +1039,12 @@ static void hns_nic_tx_clr_all_bufs(stru
int head;
int bytes, pkts;
- NETIF_TX_LOCK(ring);
-
head = ring->next_to_use; /* ntu :soft setted ring position*/
bytes = 0;
pkts = 0;
while (head != ring->next_to_clean)
hns_nic_reclaim_one_desc(ring, &bytes, &pkts);
- NETIF_TX_UNLOCK(ring);
-
dev_queue = netdev_get_tx_queue(ndev, ring_data->queue_index);
netdev_tx_reset_queue(dev_queue);
}
From: Ville Syrjälä <[email protected]>
commit ec649c9d454ea372dcf16cccf48250994f1d7788 upstream.
I got some khugepaged spew on a 32bit x86:
BUG: sleeping function called from invalid context at include/linux/mmu_notifier.h:346
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 25, name: khugepaged
INFO: lockdep is turned off.
CPU: 1 PID: 25 Comm: khugepaged Not tainted 5.4.0-rc5-elk+ #206
Hardware name: System manufacturer P5Q-EM/P5Q-EM, BIOS 2203 07/08/2009
Call Trace:
dump_stack+0x66/0x8e
___might_sleep.cold.96+0x95/0xa6
__might_sleep+0x2e/0x80
collapse_huge_page.isra.51+0x5ac/0x1360
khugepaged+0x9a9/0x20f0
kthread+0xf5/0x110
ret_from_fork+0x2e/0x38
Looks like it's due to CONFIG_HIGHPTE=y pte_offset_map()->kmap_atomic()
vs. mmu_notifier_invalidate_range_start(). Let's do the naive approach
and just reorder the two operations.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 810e24e009cf71 ("mm/mmu_notifiers: annotate with might_sleep()")
Signed-off-by: Ville Syrjl <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Jérôme Glisse <[email protected]>
Cc: Ralph Campbell <[email protected]>
Cc: Ira Weiny <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/khugepaged.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -1016,12 +1016,13 @@ static void collapse_huge_page(struct mm
anon_vma_lock_write(vma->anon_vma);
- pte = pte_offset_map(pmd, address);
- pte_ptl = pte_lockptr(mm, pmd);
-
mmu_notifier_range_init(&range, MMU_NOTIFY_CLEAR, 0, NULL, mm,
address, address + HPAGE_PMD_SIZE);
mmu_notifier_invalidate_range_start(&range);
+
+ pte = pte_offset_map(pmd, address);
+ pte_ptl = pte_lockptr(mm, pmd);
+
pmd_ptl = pmd_lock(mm, pmd); /* probably unnecessary */
/*
* After this gup_fast can't run anymore. This also removes
From: Eric Dumazet <[email protected]>
[ Upstream commit f75359f3ac855940c5718af10ba089b8977bf339 ]
Add a couple of READ_ONCE() and WRITE_ONCE() to prevent
load-tearing and store-tearing in sock_read_timestamp()
and sock_write_timestamp()
This might prevent another KCSAN report.
Fixes: 3a0ed3e96197 ("sock: Make sock->sk_stamp thread-safe")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Deepa Dinamani <[email protected]>
Acked-by: Deepa Dinamani <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/sock.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -2331,7 +2331,7 @@ static inline ktime_t sock_read_timestam
return kt;
#else
- return sk->sk_stamp;
+ return READ_ONCE(sk->sk_stamp);
#endif
}
@@ -2342,7 +2342,7 @@ static inline void sock_write_timestamp(
sk->sk_stamp = kt;
write_sequnlock(&sk->sk_stamp_seq);
#else
- sk->sk_stamp = kt;
+ WRITE_ONCE(sk->sk_stamp, kt);
#endif
}
From: Michal Suchanek <[email protected]>
commit 52eb063d153ac310058fbaa91577a72c0e7a7169 upstream.
The device cannot be probed on !ACPI and gives this warning:
drivers/soundwire/slave.c:16:12: warning: ‘sdw_slave_add’ defined but
not used [-Wunused-function]
static int sdw_slave_add(struct sdw_bus *bus,
^~~~~~~~~~~~~
Cc: [email protected]
Fixes: 7c3cd189b86d ("soundwire: Add Master registration")
Signed-off-by: Michal Suchanek <[email protected]>
Link: https://lore.kernel.org/r/bd685232ea511251eeb9554172f1524eabf9a46e.1570097621.git.msuchanek@suse.de
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/soundwire/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/soundwire/Kconfig
+++ b/drivers/soundwire/Kconfig
@@ -5,6 +5,7 @@
menuconfig SOUNDWIRE
tristate "SoundWire support"
+ depends on ACPI
help
SoundWire is a 2-Pin interface with data and clock line ratified
by the MIPI Alliance. SoundWire is used for transporting data
From: Takashi Iwai <[email protected]>
commit e7af6307a8a54f0b873960b32b6a644f2d0fbd97 upstream.
The clean up commit 41672c0c24a6 ("ALSA: timer: Simplify error path in
snd_timer_open()") unified the error handling code paths with the
standard goto, but it introduced a subtle bug: the timer instance is
stored in snd_timer_open() incorrectly even if it returns an error.
This may eventually lead to UAF, as spotted by fuzzer.
The culprit is the snd_timer_open() code checks the
SNDRV_TIMER_IFLG_EXCLUSIVE flag with the common variable timeri.
This variable is supposed to be the newly created instance, but we
(ab-)used it for a temporary check before the actual creation of a
timer instance. After that point, there is another check for the max
number of instances, and it bails out if over the threshold. Before
the refactoring above, it worked fine because the code returned
directly from that point. After the refactoring, however, it jumps to
the unified error path that stores the timeri variable in return --
even if it returns an error. Unfortunately this stored value is kept
in the caller side (snd_timer_user_tselect()) in tu->timeri. This
causes inconsistency later, as if the timer was successfully
assigned.
In this patch, we fix it by not re-using timeri variable but a
temporary variable for testing the exclusive connection, so timeri
remains NULL at that point.
Fixes: 41672c0c24a6 ("ALSA: timer: Simplify error path in snd_timer_open()")
Reported-and-tested-by: Tristan Madani <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/core/timer.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/sound/core/timer.c
+++ b/sound/core/timer.c
@@ -284,11 +284,11 @@ int snd_timer_open(struct snd_timer_inst
goto unlock;
}
if (!list_empty(&timer->open_list_head)) {
- timeri = list_entry(timer->open_list_head.next,
+ struct snd_timer_instance *t =
+ list_entry(timer->open_list_head.next,
struct snd_timer_instance, open_list);
- if (timeri->flags & SNDRV_TIMER_IFLG_EXCLUSIVE) {
+ if (t->flags & SNDRV_TIMER_IFLG_EXCLUSIVE) {
err = -EBUSY;
- timeri = NULL;
goto unlock;
}
}
From: Jay Vosburgh <[email protected]>
[ Upstream commit 1899bb325149e481de31a4f32b59ea6f24e176ea ]
Since de77ecd4ef02 ("bonding: improve link-status update in
mii-monitoring"), the bonding driver has utilized two separate variables
to indicate the next link state a particular slave should transition to.
Each is used to communicate to a different portion of the link state
change commit logic; one to the bond_miimon_commit function itself, and
another to the state transition logic.
Unfortunately, the two variables can become unsynchronized,
resulting in incorrect link state transitions within bonding. This can
cause slaves to become stuck in an incorrect link state until a
subsequent carrier state transition.
The issue occurs when a special case in bond_slave_netdev_event
sets slave->link directly to BOND_LINK_FAIL. On the next pass through
bond_miimon_inspect after the slave goes carrier up, the BOND_LINK_FAIL
case will set the proposed next state (link_new_state) to BOND_LINK_UP,
but the new_link to BOND_LINK_DOWN. The setting of the final link state
from new_link comes after that from link_new_state, and so the slave
will end up incorrectly in _DOWN state.
Resolve this by combining the two variables into one.
Reported-by: Aleksei Zakharov <[email protected]>
Reported-by: Sha Zhang <[email protected]>
Cc: Mahesh Bandewar <[email protected]>
Fixes: de77ecd4ef02 ("bonding: improve link-status update in mii-monitoring")
Signed-off-by: Jay Vosburgh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/bonding/bond_main.c | 44 ++++++++++++++++++++--------------------
include/net/bonding.h | 3 --
2 files changed, 23 insertions(+), 24 deletions(-)
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2086,8 +2086,7 @@ static int bond_miimon_inspect(struct bo
ignore_updelay = !rcu_dereference(bond->curr_active_slave);
bond_for_each_slave_rcu(bond, slave, iter) {
- slave->new_link = BOND_LINK_NOCHANGE;
- slave->link_new_state = slave->link;
+ bond_propose_link_state(slave, BOND_LINK_NOCHANGE);
link_state = bond_check_dev_link(bond, slave->dev, 0);
@@ -2121,7 +2120,7 @@ static int bond_miimon_inspect(struct bo
}
if (slave->delay <= 0) {
- slave->new_link = BOND_LINK_DOWN;
+ bond_propose_link_state(slave, BOND_LINK_DOWN);
commit++;
continue;
}
@@ -2158,7 +2157,7 @@ static int bond_miimon_inspect(struct bo
slave->delay = 0;
if (slave->delay <= 0) {
- slave->new_link = BOND_LINK_UP;
+ bond_propose_link_state(slave, BOND_LINK_UP);
commit++;
ignore_updelay = false;
continue;
@@ -2196,7 +2195,7 @@ static void bond_miimon_commit(struct bo
struct slave *slave, *primary;
bond_for_each_slave(bond, slave, iter) {
- switch (slave->new_link) {
+ switch (slave->link_new_state) {
case BOND_LINK_NOCHANGE:
/* For 802.3ad mode, check current slave speed and
* duplex again in case its port was disabled after
@@ -2268,8 +2267,8 @@ static void bond_miimon_commit(struct bo
default:
slave_err(bond->dev, slave->dev, "invalid new link %d on slave\n",
- slave->new_link);
- slave->new_link = BOND_LINK_NOCHANGE;
+ slave->link_new_state);
+ bond_propose_link_state(slave, BOND_LINK_NOCHANGE);
continue;
}
@@ -2677,13 +2676,13 @@ static void bond_loadbalance_arp_mon(str
bond_for_each_slave_rcu(bond, slave, iter) {
unsigned long trans_start = dev_trans_start(slave->dev);
- slave->new_link = BOND_LINK_NOCHANGE;
+ bond_propose_link_state(slave, BOND_LINK_NOCHANGE);
if (slave->link != BOND_LINK_UP) {
if (bond_time_in_interval(bond, trans_start, 1) &&
bond_time_in_interval(bond, slave->last_rx, 1)) {
- slave->new_link = BOND_LINK_UP;
+ bond_propose_link_state(slave, BOND_LINK_UP);
slave_state_changed = 1;
/* primary_slave has no meaning in round-robin
@@ -2708,7 +2707,7 @@ static void bond_loadbalance_arp_mon(str
if (!bond_time_in_interval(bond, trans_start, 2) ||
!bond_time_in_interval(bond, slave->last_rx, 2)) {
- slave->new_link = BOND_LINK_DOWN;
+ bond_propose_link_state(slave, BOND_LINK_DOWN);
slave_state_changed = 1;
if (slave->link_failure_count < UINT_MAX)
@@ -2739,8 +2738,8 @@ static void bond_loadbalance_arp_mon(str
goto re_arm;
bond_for_each_slave(bond, slave, iter) {
- if (slave->new_link != BOND_LINK_NOCHANGE)
- slave->link = slave->new_link;
+ if (slave->link_new_state != BOND_LINK_NOCHANGE)
+ slave->link = slave->link_new_state;
}
if (slave_state_changed) {
@@ -2763,9 +2762,9 @@ re_arm:
}
/* Called to inspect slaves for active-backup mode ARP monitor link state
- * changes. Sets new_link in slaves to specify what action should take
- * place for the slave. Returns 0 if no changes are found, >0 if changes
- * to link states must be committed.
+ * changes. Sets proposed link state in slaves to specify what action
+ * should take place for the slave. Returns 0 if no changes are found, >0
+ * if changes to link states must be committed.
*
* Called with rcu_read_lock held.
*/
@@ -2777,12 +2776,12 @@ static int bond_ab_arp_inspect(struct bo
int commit = 0;
bond_for_each_slave_rcu(bond, slave, iter) {
- slave->new_link = BOND_LINK_NOCHANGE;
+ bond_propose_link_state(slave, BOND_LINK_NOCHANGE);
last_rx = slave_last_rx(bond, slave);
if (slave->link != BOND_LINK_UP) {
if (bond_time_in_interval(bond, last_rx, 1)) {
- slave->new_link = BOND_LINK_UP;
+ bond_propose_link_state(slave, BOND_LINK_UP);
commit++;
}
continue;
@@ -2810,7 +2809,7 @@ static int bond_ab_arp_inspect(struct bo
if (!bond_is_active_slave(slave) &&
!rcu_access_pointer(bond->current_arp_slave) &&
!bond_time_in_interval(bond, last_rx, 3)) {
- slave->new_link = BOND_LINK_DOWN;
+ bond_propose_link_state(slave, BOND_LINK_DOWN);
commit++;
}
@@ -2823,7 +2822,7 @@ static int bond_ab_arp_inspect(struct bo
if (bond_is_active_slave(slave) &&
(!bond_time_in_interval(bond, trans_start, 2) ||
!bond_time_in_interval(bond, last_rx, 2))) {
- slave->new_link = BOND_LINK_DOWN;
+ bond_propose_link_state(slave, BOND_LINK_DOWN);
commit++;
}
}
@@ -2843,7 +2842,7 @@ static void bond_ab_arp_commit(struct bo
struct slave *slave;
bond_for_each_slave(bond, slave, iter) {
- switch (slave->new_link) {
+ switch (slave->link_new_state) {
case BOND_LINK_NOCHANGE:
continue;
@@ -2893,8 +2892,9 @@ static void bond_ab_arp_commit(struct bo
continue;
default:
- slave_err(bond->dev, slave->dev, "impossible: new_link %d on slave\n",
- slave->new_link);
+ slave_err(bond->dev, slave->dev,
+ "impossible: link_new_state %d on slave\n",
+ slave->link_new_state);
continue;
}
--- a/include/net/bonding.h
+++ b/include/net/bonding.h
@@ -159,7 +159,6 @@ struct slave {
unsigned long target_last_arp_rx[BOND_MAX_ARP_TARGETS];
s8 link; /* one of BOND_LINK_XXXX */
s8 link_new_state; /* one of BOND_LINK_XXXX */
- s8 new_link;
u8 backup:1, /* indicates backup slave. Value corresponds with
BOND_STATE_ACTIVE and BOND_STATE_BACKUP */
inactive:1, /* indicates inactive slave */
@@ -549,7 +548,7 @@ static inline void bond_propose_link_sta
static inline void bond_commit_link_state(struct slave *slave, bool notify)
{
- if (slave->link == slave->link_new_state)
+ if (slave->link_new_state == BOND_LINK_NOCHANGE)
return;
slave->link = slave->link_new_state;
From: Kevin Hao <[email protected]>
commit 5cbf2fff3bba8d3c6a4d47c1754de1cf57e2b01f upstream.
In the current code, we use the atomic_cmpxchg() to serialize the output
of the dump_stack(), but this implementation suffers the thundering herd
problem. We have observed such kind of livelock on a Marvell cn96xx
board(24 cpus) when heavily using the dump_stack() in a kprobe handler.
Actually we can let the competitors to wait for the releasing of the
lock before jumping to atomic_cmpxchg(). This will definitely mitigate
the thundering herd problem. Thanks Linus for the suggestion.
[[email protected]: fix comment]
Link: http://lkml.kernel.org/r/[email protected]
Fixes: b58d977432c8 ("dump_stack: serialize the output from dump_stack()")
Signed-off-by: Kevin Hao <[email protected]>
Suggested-by: Linus Torvalds <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
lib/dump_stack.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/lib/dump_stack.c
+++ b/lib/dump_stack.c
@@ -106,7 +106,12 @@ retry:
was_locked = 1;
} else {
local_irq_restore(flags);
- cpu_relax();
+ /*
+ * Wait for the lock to release before jumping to
+ * atomic_cmpxchg() in order to mitigate the thundering herd
+ * problem.
+ */
+ do { cpu_relax(); } while (atomic_read(&dump_lock) != -1);
goto retry;
}
From: Roman Gushchin <[email protected]>
commit 221ec5c0a46c1a1740f34fb36fc661a5284d01b0 upstream.
page_cgroup_ino() doesn't return a valid memcg pointer for non-compound
slab pages, because it depends on PgHead AND PgSlab flags to be set to
determine the memory cgroup from the kmem_cache. It's correct for
compound pages, but not for generic small pages. Those don't have PgHead
set, so it ends up returning zero.
Fix this by replacing the condition to PageSlab() && !PageTail().
Before this patch:
[root@localhost ~]# ./page-types -c /sys/fs/cgroup/user.slice/user-0.slice/[email protected]/ | grep slab
0x0000000000000080 38 0 _______S___________________________________ slab
After this patch:
[root@localhost ~]# ./page-types -c /sys/fs/cgroup/user.slice/user-0.slice/[email protected]/ | grep slab
0x0000000000000080 147 0 _______S___________________________________ slab
Also, hwpoison_filter_task() uses output of page_cgroup_ino() in order
to filter error injection events based on memcg. So if
page_cgroup_ino() fails to return memcg pointer, we just fail to inject
memory error. Considering that hwpoison filter is for testing, affected
users are limited and the impact should be marginal.
[[email protected]: changelog additions]
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 4d96ba353075 ("mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages")
Signed-off-by: Roman Gushchin <[email protected]>
Reviewed-by: Shakeel Butt <[email protected]>
Acked-by: David Rientjes <[email protected]>
Cc: Vladimir Davydov <[email protected]>
Cc: Daniel Jordan <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/memcontrol.c | 2 +-
mm/slab.h | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -486,7 +486,7 @@ ino_t page_cgroup_ino(struct page *page)
unsigned long ino = 0;
rcu_read_lock();
- if (PageHead(page) && PageSlab(page))
+ if (PageSlab(page) && !PageTail(page))
memcg = memcg_from_slab_page(page);
else
memcg = READ_ONCE(page->mem_cgroup);
--- a/mm/slab.h
+++ b/mm/slab.h
@@ -259,8 +259,8 @@ static inline struct kmem_cache *memcg_r
* Expects a pointer to a slab page. Please note, that PageSlab() check
* isn't sufficient, as it returns true also for tail compound slab pages,
* which do not have slab_cache pointer set.
- * So this function assumes that the page can pass PageHead() and PageSlab()
- * checks.
+ * So this function assumes that the page can pass PageSlab() && !PageTail()
+ * check.
*
* The kmem_cache can be reparented asynchronously. The caller must ensure
* the memcg lifetime, e.g. by taking rcu_read_lock() or cgroup_mutex.
From: Jeff Layton <[email protected]>
commit 5bb5e6ee6f5c557dcd19822eccd7bcced1e1a410 upstream.
If ceph_atomic_open is handed a !d_in_lookup dentry, then that means
that it already passed d_revalidate so we *know* that it's negative (or
at least was very recently). Just return -ENOENT in that case.
This also addresses a subtle bug in dentry handling. Non-O_CREAT opens
call atomic_open with the parent's i_rwsem shared, but calling
d_splice_alias on a hashed dentry requires the exclusive lock.
If ceph_atomic_open receives a hashed, negative dentry on a non-O_CREAT
open, and another client were to race in and create the file before we
issue our OPEN, ceph_fill_trace could end up calling d_splice_alias on
the dentry with the new inode with insufficient locks.
Cc: [email protected]
Reported-by: Al Viro <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ceph/file.c | 3 +++
1 file changed, 3 insertions(+)
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -458,6 +458,9 @@ int ceph_atomic_open(struct inode *dir,
err = ceph_security_init_secctx(dentry, mode, &as_ctx);
if (err < 0)
goto out_ctx;
+ } else if (!d_in_lookup(dentry)) {
+ /* If it's not being looked up, it's negative */
+ return -ENOENT;
}
/* do the open */
From: Luis Henriques <[email protected]>
commit a3a0819388b2bf15e7eafe38ff6aacfc27b12df0 upstream.
copy_file_range tries to use the OSD 'copy-from' operation, which simply
performs a full object copy. Unfortunately, the implementation of this
system call assumes that stripe_count is always set to 1 and doesn't take
into account that the data may be striped across an object set. If the
file layout has stripe_count different from 1, then the destination file
data will be corrupted.
For example:
Consider a 8 MiB file with 4 MiB object size, stripe_count of 2 and
stripe_size of 2 MiB; the first half of the file will be filled with 'A's
and the second half will be filled with 'B's:
0 4M 8M Obj1 Obj2
+------+------+ +----+ +----+
file: | AAAA | BBBB | | AA | | AA |
+------+------+ |----| |----|
| BB | | BB |
+----+ +----+
If we copy_file_range this file into a new file (which needs to have the
same file layout!), then it will start by copying the object starting at
file offset 0 (Obj1). And then it will copy the object starting at file
offset 4M -- which is Obj1 again.
Unfortunately, the solution for this is to not allow remote object copies
to be performed when the file layout stripe_count is not 1 and simply
fallback to the default (VFS) copy_file_range implementation.
Cc: [email protected]
Signed-off-by: Luis Henriques <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ceph/file.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -1934,10 +1934,18 @@ static ssize_t __ceph_copy_file_range(st
if (ceph_test_mount_opt(ceph_inode_to_client(src_inode), NOCOPYFROM))
return -EOPNOTSUPP;
+ /*
+ * Striped file layouts require that we copy partial objects, but the
+ * OSD copy-from operation only supports full-object copies. Limit
+ * this to non-striped file layouts for now.
+ */
if ((src_ci->i_layout.stripe_unit != dst_ci->i_layout.stripe_unit) ||
- (src_ci->i_layout.stripe_count != dst_ci->i_layout.stripe_count) ||
- (src_ci->i_layout.object_size != dst_ci->i_layout.object_size))
+ (src_ci->i_layout.stripe_count != 1) ||
+ (dst_ci->i_layout.stripe_count != 1) ||
+ (src_ci->i_layout.object_size != dst_ci->i_layout.object_size)) {
+ dout("Invalid src/dst files layout\n");
return -EOPNOTSUPP;
+ }
if (len < src_ci->i_layout.object_size)
return -EOPNOTSUPP; /* no remote copy will be done */
From: Fabrice Gasnier <[email protected]>
commit e6afcf6c598d6f3a0c9c408bfeddb3f5730608b0 upstream.
There maybe a race when using dmaengine_terminate_all(). The predisable
routine may call iio_triggered_buffer_predisable() prior to a pending DMA
callback.
Adopt dmaengine_terminate_sync() to ensure there's no pending DMA request
before calling iio_triggered_buffer_predisable().
Fixes: 2763ea0585c9 ("iio: adc: stm32: add optional dma support")
Signed-off-by: Fabrice Gasnier <[email protected]>
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/adc/stm32-adc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -1399,7 +1399,7 @@ static int stm32_adc_dma_start(struct ii
cookie = dmaengine_submit(desc);
ret = dma_submit_error(cookie);
if (ret) {
- dmaengine_terminate_all(adc->dma_chan);
+ dmaengine_terminate_sync(adc->dma_chan);
return ret;
}
@@ -1477,7 +1477,7 @@ static void __stm32_adc_buffer_predisabl
stm32_adc_conv_irq_disable(adc);
if (adc->dma_chan)
- dmaengine_terminate_all(adc->dma_chan);
+ dmaengine_terminate_sync(adc->dma_chan);
if (stm32_adc_set_trig(indio_dev, NULL))
dev_err(&indio_dev->dev, "Can't clear trigger\n");
From: Alexandru Ardelean <[email protected]>
commit 24e1eb5c0d78cfb9750b690bbe997d4d59170258 upstream.
It could happen that either `val` or `val2` [provided from userspace] is
negative. In that case the computed frequency could get a weird value.
Fix this by checking that neither of the 2 variables is negative, and check
that the computed result is not-zero.
Fixes: e4f959390178 ("iio: imu: adis16480 switch sampling frequency attr to core support")
Signed-off-by: Alexandru Ardelean <[email protected]>
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/imu/adis16480.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/iio/imu/adis16480.c
+++ b/drivers/iio/imu/adis16480.c
@@ -317,8 +317,11 @@ static int adis16480_set_freq(struct iio
struct adis16480 *st = iio_priv(indio_dev);
unsigned int t, reg;
+ if (val < 0 || val2 < 0)
+ return -EINVAL;
+
t = val * 1000 + val2 / 1000;
- if (t <= 0)
+ if (t == 0)
return -EINVAL;
/*
From: Claudiu Manoil <[email protected]>
[ Upstream commit 7afb3e575e5aa9f5a200a3eb3f45d8130f6d6601 ]
The check that the event is actually for this device should be moved
from the "port" handler to the net device handler.
Otherwise the port handler will deny bonding configuration for other
net devices in the same system (like enetc in the LS1028A) that don't
have the lag_upper_info->tx_type restriction that ocelot has.
Fixes: dc96ee3730fc ("net: mscc: ocelot: add bonding support")
Signed-off-by: Claudiu Manoil <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mscc/ocelot.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -1499,9 +1499,6 @@ static int ocelot_netdevice_port_event(s
struct ocelot_port *ocelot_port = netdev_priv(dev);
int err = 0;
- if (!ocelot_netdevice_dev_check(dev))
- return 0;
-
switch (event) {
case NETDEV_CHANGEUPPER:
if (netif_is_bridge_master(info->upper_dev)) {
@@ -1538,6 +1535,9 @@ static int ocelot_netdevice_event(struct
struct net_device *dev = netdev_notifier_info_to_dev(ptr);
int ret = 0;
+ if (!ocelot_netdevice_dev_check(dev))
+ return 0;
+
if (event == NETDEV_PRECHANGEUPPER &&
netif_is_lag_master(info->upper_dev)) {
struct netdev_lag_upper_info *lag_upper_info = info->upper_info;
From: Claudiu Manoil <[email protected]>
[ Upstream commit 3b3eed8eec47259939ee6c3d58aea1c311ddee3b ]
lag_upper_info may be NULL on slave removal.
Fixes: dc96ee3730fc ("net: mscc: ocelot: add bonding support")
Signed-off-by: Claudiu Manoil <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mscc/ocelot.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -1543,7 +1543,8 @@ static int ocelot_netdevice_event(struct
struct netdev_lag_upper_info *lag_upper_info = info->upper_info;
struct netlink_ext_ack *extack;
- if (lag_upper_info->tx_type != NETDEV_LAG_TX_TYPE_HASH) {
+ if (lag_upper_info &&
+ lag_upper_info->tx_type != NETDEV_LAG_TX_TYPE_HASH) {
extack = netdev_notifier_info_to_extack(&info->info);
NL_SET_ERR_MSG_MOD(extack, "LAG device using unsupported Tx type");
From: Jakub Kicinski <[email protected]>
[ Upstream commit 02b1fa07bb58f5d1f349b5b09eb936739a7b20fc ]
sk_write_pending being not zero does not guarantee that partial
record will be pushed. If the thread waiting for memory times out
the pending record may get stuck.
In case of tls_device there is no path where parial record is
set and writer present in the first place. Partial record is
set only in tls_push_sg() and tls_push_sg() will return an
error immediately. All tls_device callers of tls_push_sg()
will return (and not wait for memory) if it failed.
Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance")
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/tls/tls_device.c | 4 +++-
net/tls/tls_sw.c | 9 +++------
2 files changed, 6 insertions(+), 7 deletions(-)
--- a/net/tls/tls_device.c
+++ b/net/tls/tls_device.c
@@ -575,9 +575,11 @@ static int tls_device_push_pending_recor
void tls_device_write_space(struct sock *sk, struct tls_context *ctx)
{
- if (!sk->sk_write_pending && tls_is_partially_sent_record(ctx)) {
+ if (tls_is_partially_sent_record(ctx)) {
gfp_t sk_allocation = sk->sk_allocation;
+ WARN_ON_ONCE(sk->sk_write_pending);
+
sk->sk_allocation = GFP_ATOMIC;
tls_push_partial_record(sk, ctx,
MSG_DONTWAIT | MSG_NOSIGNAL |
--- a/net/tls/tls_sw.c
+++ b/net/tls/tls_sw.c
@@ -2182,12 +2182,9 @@ void tls_sw_write_space(struct sock *sk,
struct tls_sw_context_tx *tx_ctx = tls_sw_ctx_tx(ctx);
/* Schedule the transmission if tx list is ready */
- if (is_tx_ready(tx_ctx) && !sk->sk_write_pending) {
- /* Schedule the transmission */
- if (!test_and_set_bit(BIT_TX_SCHEDULED,
- &tx_ctx->tx_bitmask))
- schedule_delayed_work(&tx_ctx->tx_work.work, 0);
- }
+ if (is_tx_ready(tx_ctx) &&
+ !test_and_set_bit(BIT_TX_SCHEDULED, &tx_ctx->tx_bitmask))
+ schedule_delayed_work(&tx_ctx->tx_work.work, 0);
}
void tls_sw_strparser_arm(struct sock *sk, struct tls_context *tls_ctx)
From: Christian Brauner <[email protected]>
commit fa729c4df558936b4a1a7b3e2234011f44ede28b upstream.
Validate the stack arguments and setup the stack depening on whether or not
it is growing down or up.
Legacy clone() required userspace to know in which direction the stack is
growing and pass down the stack pointer appropriately. To make things more
confusing microblaze uses a variant of the clone() syscall selected by
CONFIG_CLONE_BACKWARDS3 that takes an additional stack_size argument.
IA64 has a separate clone2() syscall which also takes an additional
stack_size argument. Finally, parisc has a stack that is growing upwards.
Userspace therefore has a lot nasty code like the following:
#define __STACK_SIZE (8 * 1024 * 1024)
pid_t sys_clone(int (*fn)(void *), void *arg, int flags, int *pidfd)
{
pid_t ret;
void *stack;
stack = malloc(__STACK_SIZE);
if (!stack)
return -ENOMEM;
#ifdef __ia64__
ret = __clone2(fn, stack, __STACK_SIZE, flags | SIGCHLD, arg, pidfd);
#elif defined(__parisc__) /* stack grows up */
ret = clone(fn, stack, flags | SIGCHLD, arg, pidfd);
#else
ret = clone(fn, stack + __STACK_SIZE, flags | SIGCHLD, arg, pidfd);
#endif
return ret;
}
or even crazier variants such as [3].
With clone3() we have the ability to validate the stack. We can check that
when stack_size is passed, the stack pointer is valid and the other way
around. We can also check that the memory area userspace gave us is fine to
use via access_ok(). Furthermore, we probably should not require
userspace to know in which direction the stack is growing. It is easy
for us to do this in the kernel and I couldn't find the original
reasoning behind exposing this detail to userspace.
/* Intentional user visible API change */
clone3() was released with 5.3. Currently, it is not documented and very
unclear to userspace how the stack and stack_size argument have to be
passed. After talking to glibc folks we concluded that trying to change
clone3() to setup the stack instead of requiring userspace to do this is
the right course of action.
Note, that this is an explicit change in user visible behavior we introduce
with this patch. If it breaks someone's use-case we will revert! (And then
e.g. place the new behavior under an appropriate flag.)
Breaking someone's use-case is very unlikely though. First, neither glibc
nor musl currently expose a wrapper for clone3(). Second, there is no real
motivation for anyone to use clone3() directly since it does not provide
features that legacy clone doesn't. New features for clone3() will first
happen in v5.5 which is why v5.4 is still a good time to try and make that
change now and backport it to v5.3. Searches on [4] did not reveal any
packages calling clone3().
[1]: https://lore.kernel.org/r/CAG48ez3q=BeNcuVTKBN79kJui4vC6nw0Bfq6xc-i0neheT17TA@mail.gmail.com
[2]: https://lore.kernel.org/r/20191028172143.4vnnjpdljfnexaq5@wittgenstein
[3]: https://github.com/systemd/systemd/blob/5238e9575906297608ff802a27e2ff9effa3b338/src/basic/raw-clone.h#L31
[4]: https://codesearch.debian.net
Fixes: 7f192e3cd316 ("fork: add clone3")
Cc: Kees Cook <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: David Howells <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Florian Weimer <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: <[email protected]> # 5.3
Cc: GNU C Library <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Aleksa Sarai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/fork.c | 33 ++++++++++++++++++++++++++++++++-
1 file changed, 32 insertions(+), 1 deletion(-)
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -2586,7 +2586,35 @@ noinline static int copy_clone_args_from
return 0;
}
-static bool clone3_args_valid(const struct kernel_clone_args *kargs)
+/**
+ * clone3_stack_valid - check and prepare stack
+ * @kargs: kernel clone args
+ *
+ * Verify that the stack arguments userspace gave us are sane.
+ * In addition, set the stack direction for userspace since it's easy for us to
+ * determine.
+ */
+static inline bool clone3_stack_valid(struct kernel_clone_args *kargs)
+{
+ if (kargs->stack == 0) {
+ if (kargs->stack_size > 0)
+ return false;
+ } else {
+ if (kargs->stack_size == 0)
+ return false;
+
+ if (!access_ok((void __user *)kargs->stack, kargs->stack_size))
+ return false;
+
+#if !defined(CONFIG_STACK_GROWSUP) && !defined(CONFIG_IA64)
+ kargs->stack += kargs->stack_size;
+#endif
+ }
+
+ return true;
+}
+
+static bool clone3_args_valid(struct kernel_clone_args *kargs)
{
/*
* All lower bits of the flag word are taken.
@@ -2606,6 +2634,9 @@ static bool clone3_args_valid(const stru
kargs->exit_signal)
return false;
+ if (!clone3_stack_valid(kargs))
+ return false;
+
return true;
}
From: Takashi Iwai <[email protected]>
commit 15c2b3cc09a31620914955cb2a89c277c18ee999 upstream.
The unsolicited event handler for the headphone jack on CA0132 codec
driver tries to reschedule the another delayed work with
cancel_delayed_work_sync(). It's no good idea, unfortunately,
especially after we changed the work queue to the standard global
one; this may lead to a stall because both works are using the same
global queue.
Fix it by dropping the _sync but does call cancel_delayed_work()
instead.
Fixes: 993884f6a26c ("ALSA: hda/ca0132 - Delay HP amp turnon.")
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1155836
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_ca0132.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -7604,7 +7604,7 @@ static void hp_callback(struct hda_codec
/* Delay enabling the HP amp, to let the mic-detection
* state machine run.
*/
- cancel_delayed_work_sync(&spec->unsol_hp_work);
+ cancel_delayed_work(&spec->unsol_hp_work);
schedule_delayed_work(&spec->unsol_hp_work, msecs_to_jiffies(500));
tbl = snd_hda_jack_tbl_get(codec, cb->nid);
if (tbl)
From: Jakub Kicinski <[email protected]>
[ Upstream commit 683916f6a84023407761d843048f1aea486b2612 ]
sk_msg_trim() tries to only update curr pointer if it falls into
the trimmed region. The logic, however, does not take into the
account pointer wrapping that sk_msg_iter_var_prev() does nor
(as John points out) the fact that msg->sg is a ring buffer.
This means that when the message was trimmed completely, the new
curr pointer would have the value of MAX_MSG_FRAGS - 1, which is
neither smaller than any other value, nor would it actually be
correct.
Special case the trimming to 0 length a little bit and rework
the comparison between curr and end to take into account wrapping.
This bug caused the TLS code to not copy all of the message, if
zero copy filled in fewer sg entries than memcopy would need.
Big thanks to Alexander Potapenko for the non-KMSAN reproducer.
v2:
- take into account that msg->sg is a ring buffer (John).
Link: https://lore.kernel.org/netdev/[email protected]/ (v1)
Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface")
Reported-by: [email protected]
Reported-by: [email protected]
Co-developed-by: John Fastabend <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: John Fastabend <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/skmsg.h | 9 ++++++---
net/core/skmsg.c | 20 +++++++++++++++-----
2 files changed, 21 insertions(+), 8 deletions(-)
--- a/include/linux/skmsg.h
+++ b/include/linux/skmsg.h
@@ -139,6 +139,11 @@ static inline void sk_msg_apply_bytes(st
}
}
+static inline u32 sk_msg_iter_dist(u32 start, u32 end)
+{
+ return end >= start ? end - start : end + (MAX_MSG_FRAGS - start);
+}
+
#define sk_msg_iter_var_prev(var) \
do { \
if (var == 0) \
@@ -198,9 +203,7 @@ static inline u32 sk_msg_elem_used(const
if (sk_msg_full(msg))
return MAX_MSG_FRAGS;
- return msg->sg.end >= msg->sg.start ?
- msg->sg.end - msg->sg.start :
- msg->sg.end + (MAX_MSG_FRAGS - msg->sg.start);
+ return sk_msg_iter_dist(msg->sg.start, msg->sg.end);
}
static inline struct scatterlist *sk_msg_elem(struct sk_msg *msg, int which)
--- a/net/core/skmsg.c
+++ b/net/core/skmsg.c
@@ -271,18 +271,28 @@ void sk_msg_trim(struct sock *sk, struct
msg->sg.data[i].length -= trim;
sk_mem_uncharge(sk, trim);
+ /* Adjust copybreak if it falls into the trimmed part of last buf */
+ if (msg->sg.curr == i && msg->sg.copybreak > msg->sg.data[i].length)
+ msg->sg.copybreak = msg->sg.data[i].length;
out:
- /* If we trim data before curr pointer update copybreak and current
- * so that any future copy operations start at new copy location.
+ sk_msg_iter_var_next(i);
+ msg->sg.end = i;
+
+ /* If we trim data a full sg elem before curr pointer update
+ * copybreak and current so that any future copy operations
+ * start at new copy location.
* However trimed data that has not yet been used in a copy op
* does not require an update.
*/
- if (msg->sg.curr >= i) {
+ if (!msg->sg.size) {
+ msg->sg.curr = msg->sg.start;
+ msg->sg.copybreak = 0;
+ } else if (sk_msg_iter_dist(msg->sg.start, msg->sg.curr) >=
+ sk_msg_iter_dist(msg->sg.start, msg->sg.end)) {
+ sk_msg_iter_var_prev(i);
msg->sg.curr = i;
msg->sg.copybreak = msg->sg.data[i].length;
}
- sk_msg_iter_var_next(i);
- msg->sg.end = i;
}
EXPORT_SYMBOL_GPL(sk_msg_trim);
From: Johannes Weiner <[email protected]>
commit 869712fd3de5a90b7ba23ae1272278cddc66b37b upstream.
While upgrading from 4.16 to 5.2, we noticed these allocation errors in
the log of the new kernel:
SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
cache: tw_sock_TCPv6(960:helper-logs), object size: 232, buffer size: 240, default order: 1, min order: 0
node 0: slabs: 5, objs: 170, free: 0
slab_out_of_memory+1
___slab_alloc+969
__slab_alloc+14
kmem_cache_alloc+346
inet_twsk_alloc+60
tcp_time_wait+46
tcp_fin+206
tcp_data_queue+2034
tcp_rcv_state_process+784
tcp_v6_do_rcv+405
__release_sock+118
tcp_close+385
inet_release+46
__sock_release+55
sock_close+17
__fput+170
task_work_run+127
exit_to_usermode_loop+191
do_syscall_64+212
entry_SYSCALL_64_after_hwframe+68
accompanied by an increase in machines going completely radio silent
under memory pressure.
One thing that changed since 4.16 is e699e2c6a654 ("net, mm: account
sock objects to kmemcg"), which made these slab caches subject to cgroup
memory accounting and control.
The problem with that is that cgroups, unlike the page allocator, do not
maintain dedicated atomic reserves. As a cgroup's usage hovers at its
limit, atomic allocations - such as done during network rx - can fail
consistently for extended periods of time. The kernel is not able to
operate under these conditions.
We don't want to revert the culprit patch, because it indeed tracks a
potentially substantial amount of memory used by a cgroup.
We also don't want to implement dedicated atomic reserves for cgroups.
There is no point in keeping a fixed margin of unused bytes in the
cgroup's memory budget to accomodate a consumer that is impossible to
predict - we'd be wasting memory and get into configuration headaches,
not unlike what we have going with min_free_kbytes. We do this for
physical mem because we have to, but cgroups are an accounting game.
Instead, account these privileged allocations to the cgroup, but let
them bypass the configured limit if they have to. This way, we get the
benefits of accounting the consumed memory and have it exert pressure on
the rest of the cgroup, but like with the page allocator, we shift the
burden of reclaimining on behalf of atomic allocations onto the regular
allocations that can block.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: e699e2c6a654 ("net, mm: account sock objects to kmemcg")
Signed-off-by: Johannes Weiner <[email protected]>
Reviewed-by: Shakeel Butt <[email protected]>
Cc: Suleiman Souhlal <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: <[email protected]> [4.18+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/memcontrol.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -2408,6 +2408,15 @@ retry:
}
/*
+ * Memcg doesn't have a dedicated reserve for atomic
+ * allocations. But like the global atomic pool, we need to
+ * put the burden of reclaim on regular allocation requests
+ * and let these go through as privileged allocations.
+ */
+ if (gfp_mask & __GFP_ATOMIC)
+ goto force;
+
+ /*
* Unlike in global OOM situations, memcg is not in a physical
* memory shortage. Allow dying and OOM-killed tasks to
* bypass the last charges so that they can exit quickly and
From: Shakeel Butt <[email protected]>
commit 7961eee3978475fd9e8626137f88595b1ca05856 upstream.
__mem_cgroup_free() can be called on the failure path in
mem_cgroup_alloc(). However memcg_flush_percpu_vmstats() and
memcg_flush_percpu_vmevents() which are called from __mem_cgroup_free()
access the fields of memcg which can potentially be null if called from
failure path from mem_cgroup_alloc(). Indeed syzbot has reported the
following crash:
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 30393 Comm: syz-executor.1 Not tainted 5.4.0-rc2+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:memcg_flush_percpu_vmstats+0x4ae/0x930 mm/memcontrol.c:3436
Code: 05 41 89 c0 41 0f b6 04 24 41 38 c7 7c 08 84 c0 0f 85 5d 03 00 00 44 3b 05 33 d5 12 08 0f 83 e2 00 00 00 4c 89 f0 48 c1 e8 03 <42> 80 3c 28 00 0f 85 91 03 00 00 48 8b 85 10 fe ff ff 48 8b b0 90
RSP: 0018:ffff888095c27980 EFLAGS: 00010206
RAX: 0000000000000012 RBX: ffff888095c27b28 RCX: ffffc90008192000
RDX: 0000000000040000 RSI: ffffffff8340fae7 RDI: 0000000000000007
RBP: ffff888095c27be0 R08: 0000000000000000 R09: ffffed1013f0da33
R10: ffffed1013f0da32 R11: ffff88809f86d197 R12: fffffbfff138b760
R13: dffffc0000000000 R14: 0000000000000090 R15: 0000000000000007
FS: 00007f5027170700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000710158 CR3: 00000000a7b18000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__mem_cgroup_free+0x1a/0x190 mm/memcontrol.c:5021
mem_cgroup_free mm/memcontrol.c:5033 [inline]
mem_cgroup_css_alloc+0x3a1/0x1ae0 mm/memcontrol.c:5160
css_create kernel/cgroup/cgroup.c:5156 [inline]
cgroup_apply_control_enable+0x44d/0xc40 kernel/cgroup/cgroup.c:3119
cgroup_mkdir+0x899/0x11b0 kernel/cgroup/cgroup.c:5401
kernfs_iop_mkdir+0x14d/0x1d0 fs/kernfs/dir.c:1124
vfs_mkdir+0x42e/0x670 fs/namei.c:3807
do_mkdirat+0x234/0x2a0 fs/namei.c:3830
__do_sys_mkdir fs/namei.c:3846 [inline]
__se_sys_mkdir fs/namei.c:3844 [inline]
__x64_sys_mkdir+0x5c/0x80 fs/namei.c:3844
do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixing this by moving the flush to mem_cgroup_free as there is no need
to flush anything if we see failure in mem_cgroup_alloc().
Link: http://lkml.kernel.org/r/[email protected]
Fixes: bb65f89b7d3d ("mm: memcontrol: flush percpu vmevents before releasing memcg")
Fixes: c350a99ea2b1 ("mm: memcontrol: flush percpu vmstats before releasing memcg")
Signed-off-by: Shakeel Butt <[email protected]>
Reported-by: [email protected]
Reviewed-by: Roman Gushchin <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Vladimir Davydov <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/memcontrol.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -4763,12 +4763,6 @@ static void __mem_cgroup_free(struct mem
{
int node;
- /*
- * Flush percpu vmstats and vmevents to guarantee the value correctness
- * on parent's and all ancestor levels.
- */
- memcg_flush_percpu_vmstats(memcg, false);
- memcg_flush_percpu_vmevents(memcg);
for_each_node(node)
free_mem_cgroup_per_node_info(memcg, node);
free_percpu(memcg->vmstats_percpu);
@@ -4779,6 +4773,12 @@ static void __mem_cgroup_free(struct mem
static void mem_cgroup_free(struct mem_cgroup *memcg)
{
memcg_wb_domain_exit(memcg);
+ /*
+ * Flush percpu vmstats and vmevents to guarantee the value correctness
+ * on parent's and all ancestor levels.
+ */
+ memcg_flush_percpu_vmstats(memcg, false);
+ memcg_flush_percpu_vmevents(memcg);
__mem_cgroup_free(memcg);
}
From: Sean Tranchetti <[email protected]>
[ Upstream commit e7a86c687e64ab24f88330ad24ecc9442ce40c5a ]
During the exit/unregistration process of the RmNet driver, the function
rmnet_unregister_real_device() is called to handle freeing the driver's
internal state and removing the RX handler on the underlying physical
device. However, the order of operations this function performs is wrong
and can lead to a use after free of the rmnet_port structure.
Before calling netdev_rx_handler_unregister(), this port structure is
freed with kfree(). If packets are received on any RmNet devices before
synchronize_net() completes, they will attempt to use this already-freed
port structure when processing the packet. As such, before cleaning up any
other internal state, the RX handler must be unregistered in order to
guarantee that no further packets will arrive on the device.
Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Sean Tranchetti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c
@@ -57,10 +57,10 @@ static int rmnet_unregister_real_device(
if (port->nr_rmnet_devs)
return -EINVAL;
- kfree(port);
-
netdev_rx_handler_unregister(real_dev);
+ kfree(port);
+
/* release reference on real_dev */
dev_put(real_dev);
From: Yang Shi <[email protected]>
commit 169226f7e0d275c1879551f37484ef6683579a5c upstream.
We have a usecase to use tmpfs as QEMU memory backend and we would like
to take the advantage of THP as well. But, our test shows the EPT is
not PMD mapped even though the underlying THP are PMD mapped on host.
The number showed by /sys/kernel/debug/kvm/largepage is much less than
the number of PMD mapped shmem pages as the below:
7f2778200000-7f2878200000 rw-s 00000000 00:14 262232 /dev/shm/qemu_back_mem.mem.Hz2hSf (deleted)
Size: 4194304 kB
[snip]
AnonHugePages: 0 kB
ShmemPmdMapped: 579584 kB
[snip]
Locked: 0 kB
cat /sys/kernel/debug/kvm/largepages
12
And some benchmarks do worse than with anonymous THPs.
By digging into the code we figured out that commit 127393fbe597 ("mm:
thp: kvm: fix memory corruption in KVM with THP enabled") checks if
there is a single PTE mapping on the page for anonymous THP when setting
up EPT map. But the _mapcount < 0 check doesn't work for page cache THP
since every subpage of page cache THP would get _mapcount inc'ed once it
is PMD mapped, so PageTransCompoundMap() always returns false for page
cache THP. This would prevent KVM from setting up PMD mapped EPT entry.
So we need handle page cache THP correctly. However, when page cache
THP's PMD gets split, kernel just remove the map instead of setting up
PTE map like what anonymous THP does. Before KVM calls get_user_pages()
the subpages may get PTE mapped even though it is still a THP since the
page cache THP may be mapped by other processes at the mean time.
Checking its _mapcount and whether the THP has PTE mapped or not.
Although this may report some false negative cases (PTE mapped by other
processes), it looks not trivial to make this accurate.
With this fix /sys/kernel/debug/kvm/largepage would show reasonable
pages are PMD mapped by EPT as the below:
7fbeaee00000-7fbfaee00000 rw-s 00000000 00:14 275464 /dev/shm/qemu_back_mem.mem.SKUvat (deleted)
Size: 4194304 kB
[snip]
AnonHugePages: 0 kB
ShmemPmdMapped: 557056 kB
[snip]
Locked: 0 kB
cat /sys/kernel/debug/kvm/largepages
271
And the benchmarks are as same as anonymous THPs.
[[email protected]: v4]
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Fixes: dd78fedde4b9 ("rmap: support file thp")
Signed-off-by: Yang Shi <[email protected]>
Reported-by: Gang Deng <[email protected]>
Tested-by: Gang Deng <[email protected]>
Suggested-by: Hugh Dickins <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: <[email protected]> [4.8+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/mm.h | 5 -----
include/linux/mm_types.h | 5 +++++
include/linux/page-flags.h | 20 ++++++++++++++++++--
3 files changed, 23 insertions(+), 7 deletions(-)
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -695,11 +695,6 @@ static inline void *kvcalloc(size_t n, s
extern void kvfree(const void *addr);
-static inline atomic_t *compound_mapcount_ptr(struct page *page)
-{
- return &page[1].compound_mapcount;
-}
-
static inline int compound_mapcount(struct page *page)
{
VM_BUG_ON_PAGE(!PageCompound(page), page);
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -221,6 +221,11 @@ struct page {
#endif
} _struct_page_alignment;
+static inline atomic_t *compound_mapcount_ptr(struct page *page)
+{
+ return &page[1].compound_mapcount;
+}
+
/*
* Used for sizing the vmemmap region on some architectures
*/
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -622,12 +622,28 @@ static inline int PageTransCompound(stru
*
* Unlike PageTransCompound, this is safe to be called only while
* split_huge_pmd() cannot run from under us, like if protected by the
- * MMU notifier, otherwise it may result in page->_mapcount < 0 false
+ * MMU notifier, otherwise it may result in page->_mapcount check false
* positives.
+ *
+ * We have to treat page cache THP differently since every subpage of it
+ * would get _mapcount inc'ed once it is PMD mapped. But, it may be PTE
+ * mapped in the current process so comparing subpage's _mapcount to
+ * compound_mapcount to filter out PTE mapped case.
*/
static inline int PageTransCompoundMap(struct page *page)
{
- return PageTransCompound(page) && atomic_read(&page->_mapcount) < 0;
+ struct page *head;
+
+ if (!PageTransCompound(page))
+ return 0;
+
+ if (PageAnon(page))
+ return atomic_read(&page->_mapcount) < 0;
+
+ head = compound_head(page);
+ /* File THP is PMD mapped and not PTE mapped */
+ return atomic_read(&page->_mapcount) ==
+ atomic_read(compound_mapcount_ptr(head));
}
/*
From: Pan Bian <[email protected]>
[ Upstream commit 517ce4e93368938b204451285e53014549804868 ]
The address of fw_vsc_cfg is on stack. Releasing it with devm_kfree() is
incorrect, which may result in a system crash or other security impacts.
The expected object to free is *fw_vsc_cfg.
Signed-off-by: Pan Bian <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nfc/fdp/i2c.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/nfc/fdp/i2c.c
+++ b/drivers/nfc/fdp/i2c.c
@@ -259,7 +259,7 @@ static void fdp_nci_i2c_read_device_prop
*fw_vsc_cfg, len);
if (r) {
- devm_kfree(dev, fw_vsc_cfg);
+ devm_kfree(dev, *fw_vsc_cfg);
goto vsc_read_err;
}
} else {
From: Marc Kleine-Budde <[email protected]>
commit ca913f1ac024559ebc17f0b599af262f0ad997c9 upstream.
If the rx-offload skb_queue is full can_rx_offload_queue_sorted() will
not queue the skb and return with an error.
None of the callers of this function, issue a kfree_skb() to free the
not queued skb. This results in a memory leak.
This patch fixes the problem by freeing the skb in case of a full queue.
The return value is adjusted to -ENOBUFS to better reflect the actual
problem.
The device stats handling is left to the callers, as this function might
be used in both the rx and tx path.
Fixes: 55059f2b7f86 ("can: rx-offload: introduce can_rx_offload_get_echo_skb() and can_rx_offload_queue_sorted() functions")
Cc: linux-stable <[email protected]>
Cc: Martin Hundebøll <[email protected]>
Reported-by: Martin Hundebøll <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/rx-offload.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/net/can/rx-offload.c
+++ b/drivers/net/can/rx-offload.c
@@ -207,8 +207,10 @@ int can_rx_offload_queue_sorted(struct c
unsigned long flags;
if (skb_queue_len(&offload->skb_queue) >
- offload->skb_queue_len_max)
- return -ENOMEM;
+ offload->skb_queue_len_max) {
+ kfree_skb(skb);
+ return -ENOBUFS;
+ }
cb = can_rx_offload_get_cb(skb);
cb->timestamp = timestamp;
From: Navid Emamdoost <[email protected]>
commit fb5be6a7b4863ecc44963bb80ca614584b6c7817 upstream.
In gs_can_open() if usb_submit_urb() fails the allocated urb should be
released.
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Cc: linux-stable <[email protected]>
Signed-off-by: Navid Emamdoost <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/gs_usb.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/can/usb/gs_usb.c
+++ b/drivers/net/can/usb/gs_usb.c
@@ -623,6 +623,7 @@ static int gs_can_open(struct net_device
rc);
usb_unanchor_urb(urb);
+ usb_free_urb(urb);
break;
}
From: Wen Yang <[email protected]>
commit db9ee384f6f71f7c5296ce85b7c1a2a2527e7c72 upstream.
of_node_put() needs to be called when the device node which is got
from of_get_child_by_name() finished using.
Fixes: 2290aefa2e90 ("can: dev: Add support for limiting configured bitrate")
Cc: Franklin S Cooper Jr <[email protected]>
Signed-off-by: Wen Yang <[email protected]>
Cc: linux-stable <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/dev.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -842,6 +842,7 @@ void of_can_transceiver(struct net_devic
return;
ret = of_property_read_u32(dn, "max-bitrate", &priv->bitrate_max);
+ of_node_put(dn);
if ((ret && ret != -EINVAL) || (!ret && !priv->bitrate_max))
netdev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit.\n");
}
From: Johan Hovold <[email protected]>
commit f7a1337f0d29b98733c8824e165fca3371d7d4fd upstream.
Fix a small slab info leak due to a failure to clear the command buffer
at allocation.
The first 16 bytes of the command buffer are always sent to the device
in pcan_usb_send_cmd() even though only the first two may have been
initialised in case no argument payload is provided (e.g. when waiting
for a response).
Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core")
Cc: stable <[email protected]> # 3.4
Reported-by: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/peak_usb/pcan_usb_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/can/usb/peak_usb/pcan_usb_core.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
@@ -750,7 +750,7 @@ static int peak_usb_create_dev(const str
dev = netdev_priv(netdev);
/* allocate a buffer large enough to send commands */
- dev->cmd_buf = kmalloc(PCAN_USB_MAX_CMD_LEN, GFP_KERNEL);
+ dev->cmd_buf = kzalloc(PCAN_USB_MAX_CMD_LEN, GFP_KERNEL);
if (!dev->cmd_buf) {
err = -ENOMEM;
goto lbl_free_candev;
From: Takashi Iwai <[email protected]>
commit 68e9fde245591d18200f8a9054cac22339437adb upstream.
Minor code refactoring by combining the UAC version and the type in
the switch-case flow, so that we reduce the indentation and
redundancy. One good bonus is that the duplicated definition of the
same type value (e.g. UAC2_EFFECT_UNIT) can be handled more cleanly.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/mixer.c | 95 ++++++++++++++++++++++--------------------------------
1 file changed, 39 insertions(+), 56 deletions(-)
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -2782,62 +2782,45 @@ static int parse_audio_unit(struct mixer
return 0; /* skip invalid unit */
}
- if (protocol == UAC_VERSION_1 || protocol == UAC_VERSION_2) {
- switch (p1[2]) {
- case UAC_INPUT_TERMINAL:
- return parse_audio_input_terminal(state, unitid, p1);
- case UAC_MIXER_UNIT:
- return parse_audio_mixer_unit(state, unitid, p1);
- case UAC2_CLOCK_SOURCE:
- return parse_clock_source_unit(state, unitid, p1);
- case UAC_SELECTOR_UNIT:
- case UAC2_CLOCK_SELECTOR:
- return parse_audio_selector_unit(state, unitid, p1);
- case UAC_FEATURE_UNIT:
- return parse_audio_feature_unit(state, unitid, p1);
- case UAC1_PROCESSING_UNIT:
- /* UAC2_EFFECT_UNIT has the same value */
- if (protocol == UAC_VERSION_1)
- return parse_audio_processing_unit(state, unitid, p1);
- else
- return 0; /* FIXME - effect units not implemented yet */
- case UAC1_EXTENSION_UNIT:
- /* UAC2_PROCESSING_UNIT_V2 has the same value */
- if (protocol == UAC_VERSION_1)
- return parse_audio_extension_unit(state, unitid, p1);
- else /* UAC_VERSION_2 */
- return parse_audio_processing_unit(state, unitid, p1);
- case UAC2_EXTENSION_UNIT_V2:
- return parse_audio_extension_unit(state, unitid, p1);
- default:
- usb_audio_err(state->chip,
- "unit %u: unexpected type 0x%02x\n", unitid, p1[2]);
- return -EINVAL;
- }
- } else { /* UAC_VERSION_3 */
- switch (p1[2]) {
- case UAC_INPUT_TERMINAL:
- return parse_audio_input_terminal(state, unitid, p1);
- case UAC3_MIXER_UNIT:
- return parse_audio_mixer_unit(state, unitid, p1);
- case UAC3_CLOCK_SOURCE:
- return parse_clock_source_unit(state, unitid, p1);
- case UAC3_SELECTOR_UNIT:
- case UAC3_CLOCK_SELECTOR:
- return parse_audio_selector_unit(state, unitid, p1);
- case UAC3_FEATURE_UNIT:
- return parse_audio_feature_unit(state, unitid, p1);
- case UAC3_EFFECT_UNIT:
- return 0; /* FIXME - effect units not implemented yet */
- case UAC3_PROCESSING_UNIT:
- return parse_audio_processing_unit(state, unitid, p1);
- case UAC3_EXTENSION_UNIT:
- return parse_audio_extension_unit(state, unitid, p1);
- default:
- usb_audio_err(state->chip,
- "unit %u: unexpected type 0x%02x\n", unitid, p1[2]);
- return -EINVAL;
- }
+#define PTYPE(a, b) ((a) << 8 | (b))
+ switch (PTYPE(protocol, p1[2])) {
+ case PTYPE(UAC_VERSION_1, UAC_INPUT_TERMINAL):
+ case PTYPE(UAC_VERSION_2, UAC_INPUT_TERMINAL):
+ case PTYPE(UAC_VERSION_3, UAC_INPUT_TERMINAL):
+ return parse_audio_input_terminal(state, unitid, p1);
+ case PTYPE(UAC_VERSION_1, UAC_MIXER_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC_MIXER_UNIT):
+ case PTYPE(UAC_VERSION_3, UAC3_MIXER_UNIT):
+ return parse_audio_mixer_unit(state, unitid, p1);
+ case PTYPE(UAC_VERSION_2, UAC2_CLOCK_SOURCE):
+ case PTYPE(UAC_VERSION_3, UAC3_CLOCK_SOURCE):
+ return parse_clock_source_unit(state, unitid, p1);
+ case PTYPE(UAC_VERSION_1, UAC_SELECTOR_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC_SELECTOR_UNIT):
+ case PTYPE(UAC_VERSION_3, UAC3_SELECTOR_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC2_CLOCK_SELECTOR):
+ case PTYPE(UAC_VERSION_3, UAC3_CLOCK_SELECTOR):
+ return parse_audio_selector_unit(state, unitid, p1);
+ case PTYPE(UAC_VERSION_1, UAC_FEATURE_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC_FEATURE_UNIT):
+ case PTYPE(UAC_VERSION_3, UAC3_FEATURE_UNIT):
+ return parse_audio_feature_unit(state, unitid, p1);
+ case PTYPE(UAC_VERSION_1, UAC1_PROCESSING_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC2_PROCESSING_UNIT_V2):
+ case PTYPE(UAC_VERSION_3, UAC3_PROCESSING_UNIT):
+ return parse_audio_processing_unit(state, unitid, p1);
+ case PTYPE(UAC_VERSION_1, UAC1_EXTENSION_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC2_EXTENSION_UNIT_V2):
+ case PTYPE(UAC_VERSION_3, UAC3_EXTENSION_UNIT):
+ return parse_audio_extension_unit(state, unitid, p1);
+ case PTYPE(UAC_VERSION_2, UAC2_EFFECT_UNIT):
+ case PTYPE(UAC_VERSION_3, UAC3_EFFECT_UNIT):
+ return 0; /* FIXME - effect units not implemented yet */
+ default:
+ usb_audio_err(state->chip,
+ "unit %u: unexpected type 0x%02x\n",
+ unitid, p1[2]);
+ return -EINVAL;
}
}
From: Alex Deucher <[email protected]>
commit 2c409ba81be25516afe05ae27a4a15da01740b01 upstream.
Need to set the dte flag on this asic.
Port the fix from amdgpu:
5cb818b861be114 ("drm/amd/amdgpu: fix si_enable_smc_cac() failed issue")
Reviewed-by: Yong Zhao <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/radeon/si_dpm.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/gpu/drm/radeon/si_dpm.c
+++ b/drivers/gpu/drm/radeon/si_dpm.c
@@ -1958,6 +1958,7 @@ static void si_initialize_powertune_defa
case 0x682C:
si_pi->cac_weights = cac_weights_cape_verde_pro;
si_pi->dte_data = dte_data_sun_xt;
+ update_dte_from_pl2 = true;
break;
case 0x6825:
case 0x6827:
From: Michal Suchanek <[email protected]>
commit 0f8c0f8a7782178c40157b2feb6a532493cbadd3 upstream.
Now devicetree is supported for probing soundwire as well.
On platforms built with !ACPI !OF (ie s390x) the device still cannot be
probed and gives a build warning.
Cc: [email protected]
Fixes: a2e484585ad3 ("soundwire: core: add device tree support for slave devices")
Signed-off-by: Michal Suchanek <[email protected]>
Link: https://lore.kernel.org/r/0b89b4ea16a93f523105c81a2f718b0cd7ec66f2.1570097621.git.msuchanek@suse.de
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
diff --git a/drivers/soundwire/Kconfig b/drivers/soundwire/Kconfig
index c73bfbaa2659..c8c80df090d1 100644
--- a/drivers/soundwire/Kconfig
+++ b/drivers/soundwire/Kconfig
@@ -5,7 +5,7 @@
menuconfig SOUNDWIRE
tristate "SoundWire support"
- depends on ACPI
+ depends on ACPI || OF
help
SoundWire is a 2-Pin interface with data and clock line ratified
by the MIPI Alliance. SoundWire is used for transporting data
From: Bard Liao <[email protected]>
commit f1fac63af678b2fc1044ca71fedf1f2ae8bf7c3b upstream.
port_status[port_num] are assigned for each port_num in some if
conditions. So some of the port_status may not be initialized.
Signed-off-by: Bard Liao <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/soundwire/bus.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -803,7 +803,7 @@ static int sdw_handle_port_interrupt(str
static int sdw_handle_slave_alerts(struct sdw_slave *slave)
{
struct sdw_slave_intr_status slave_intr;
- u8 clear = 0, bit, port_status[15];
+ u8 clear = 0, bit, port_status[15] = {0};
int port_num, stat, ret, count = 0;
unsigned long port;
bool slave_notify = false;
From: Tejun Heo <[email protected]>
commit b0814361a25cba73a224548843ed92d8ea78715a upstream.
blkcg_print_stat() iterates blkgs under RCU and doesn't test whether
the blkg is online. This can call into pd_stat_fn() on a pd which is
still being initialized leading to an oops.
The heaviest operation - recursively summing up rwstat counters - is
already done while holding the queue_lock. Expand queue_lock to cover
the other operations and skip the blkg if it isn't online yet. The
online state is protected by both blkcg and queue locks, so this
guarantees that only online blkgs are processed.
Signed-off-by: Tejun Heo <[email protected]>
Reported-by: Roman Gushchin <[email protected]>
Cc: Josef Bacik <[email protected]>
Fixes: 903d23f0a354 ("blk-cgroup: allow controllers to output their own stats")
Cc: [email protected] # v4.19+
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/blk-cgroup.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -908,9 +908,14 @@ static int blkcg_print_stat(struct seq_f
int i;
bool has_stats = false;
+ spin_lock_irq(&blkg->q->queue_lock);
+
+ if (!blkg->online)
+ goto skip;
+
dname = blkg_dev_name(blkg);
if (!dname)
- continue;
+ goto skip;
/*
* Hooray string manipulation, count is the size written NOT
@@ -920,8 +925,6 @@ static int blkcg_print_stat(struct seq_f
*/
off += scnprintf(buf+off, size-off, "%s ", dname);
- spin_lock_irq(&blkg->q->queue_lock);
-
blkg_rwstat_recursive_sum(blkg, NULL,
offsetof(struct blkcg_gq, stat_bytes), &rwstat);
rbytes = rwstat.cnt[BLKG_RWSTAT_READ];
@@ -934,8 +937,6 @@ static int blkcg_print_stat(struct seq_f
wios = rwstat.cnt[BLKG_RWSTAT_WRITE];
dios = rwstat.cnt[BLKG_RWSTAT_DISCARD];
- spin_unlock_irq(&blkg->q->queue_lock);
-
if (rbytes || wbytes || rios || wios) {
has_stats = true;
off += scnprintf(buf+off, size-off,
@@ -973,6 +974,8 @@ static int blkcg_print_stat(struct seq_f
seq_commit(sf, -1);
}
}
+ skip:
+ spin_unlock_irq(&blkg->q->queue_lock);
}
rcu_read_unlock();
From: Takashi Iwai <[email protected]>
commit ba8bf0967a154796be15c4983603aad0b05c3138 upstream.
The recently introduced USB-audio descriptor validator had a stupid
copy&paste error that may lead to an unexpected overlook of too short
descriptors for processing and extension units. It's likely the cause
of the report triggered by syzkaller fuzzer. Let's fix it.
Fixes: 57f8770620e9 ("ALSA: usb-audio: More validations of descriptor units")
Reported-by: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/validate.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/usb/validate.c
+++ b/sound/usb/validate.c
@@ -75,7 +75,7 @@ static bool validate_processing_unit(con
if (d->bLength < sizeof(*d))
return false;
- len = d->bLength < sizeof(*d) + d->bNrInPins;
+ len = sizeof(*d) + d->bNrInPins;
if (d->bLength < len)
return false;
switch (v->protocol) {
From: Luis Henriques <[email protected]>
commit ea60ed6fcf29eebc78f2ce91491e6309ee005a01 upstream.
KASAN reports a use-after-free when running xfstest generic/531, with the
following trace:
[ 293.903362] kasan_report+0xe/0x20
[ 293.903365] rb_erase+0x1f/0x790
[ 293.903370] __ceph_remove_cap+0x201/0x370
[ 293.903375] __ceph_remove_caps+0x4b/0x70
[ 293.903380] ceph_evict_inode+0x4e/0x360
[ 293.903386] evict+0x169/0x290
[ 293.903390] __dentry_kill+0x16f/0x250
[ 293.903394] dput+0x1c6/0x440
[ 293.903398] __fput+0x184/0x330
[ 293.903404] task_work_run+0xb9/0xe0
[ 293.903410] exit_to_usermode_loop+0xd3/0xe0
[ 293.903413] do_syscall_64+0x1a0/0x1c0
[ 293.903417] entry_SYSCALL_64_after_hwframe+0x44/0xa9
This happens because __ceph_remove_cap() may queue a cap release
(__ceph_queue_cap_release) which can be scheduled before that cap is
removed from the inode list with
rb_erase(&cap->ci_node, &ci->i_caps);
And, when this finally happens, the use-after-free will occur.
This can be fixed by removing the cap from the inode list before being
removed from the session list, and thus eliminating the risk of an UAF.
Cc: [email protected]
Signed-off-by: Luis Henriques <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ceph/caps.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -1087,6 +1087,11 @@ void __ceph_remove_cap(struct ceph_cap *
dout("__ceph_remove_cap %p from %p\n", cap, &ci->vfs_inode);
+ /* remove from inode's cap rbtree, and clear auth cap */
+ rb_erase(&cap->ci_node, &ci->i_caps);
+ if (ci->i_auth_cap == cap)
+ ci->i_auth_cap = NULL;
+
/* remove from session list */
spin_lock(&session->s_cap_lock);
if (session->s_cap_iterator == cap) {
@@ -1120,11 +1125,6 @@ void __ceph_remove_cap(struct ceph_cap *
spin_unlock(&session->s_cap_lock);
- /* remove from inode list */
- rb_erase(&cap->ci_node, &ci->i_caps);
- if (ci->i_auth_cap == cap)
- ci->i_auth_cap = NULL;
-
if (removed)
ceph_put_cap(mdsc, cap);
From: Al Viro <[email protected]>
commit aa8dd816732b2bab28c54bc4d2ccf3fc8a6e0892 upstream.
For RCU case ->d_revalidate() is called with rcu_read_lock() and
without pinning the dentry passed to it. Which means that it
can't rely upon ->d_inode remaining stable; that's the reason
for d_inode_rcu(), actually.
Make sure we don't reload ->d_inode there.
Cc: [email protected]
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ceph/dir.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -1553,36 +1553,37 @@ static int ceph_d_revalidate(struct dent
{
int valid = 0;
struct dentry *parent;
- struct inode *dir;
+ struct inode *dir, *inode;
if (flags & LOOKUP_RCU) {
parent = READ_ONCE(dentry->d_parent);
dir = d_inode_rcu(parent);
if (!dir)
return -ECHILD;
+ inode = d_inode_rcu(dentry);
} else {
parent = dget_parent(dentry);
dir = d_inode(parent);
+ inode = d_inode(dentry);
}
dout("d_revalidate %p '%pd' inode %p offset %lld\n", dentry,
- dentry, d_inode(dentry), ceph_dentry(dentry)->offset);
+ dentry, inode, ceph_dentry(dentry)->offset);
/* always trust cached snapped dentries, snapdir dentry */
if (ceph_snap(dir) != CEPH_NOSNAP) {
dout("d_revalidate %p '%pd' inode %p is SNAPPED\n", dentry,
- dentry, d_inode(dentry));
+ dentry, inode);
valid = 1;
- } else if (d_really_is_positive(dentry) &&
- ceph_snap(d_inode(dentry)) == CEPH_SNAPDIR) {
+ } else if (inode && ceph_snap(inode) == CEPH_SNAPDIR) {
valid = 1;
} else {
valid = dentry_lease_is_valid(dentry, flags);
if (valid == -ECHILD)
return valid;
if (valid || dir_lease_is_valid(dir, dentry)) {
- if (d_really_is_positive(dentry))
- valid = ceph_is_any_caps(d_inode(dentry));
+ if (inode)
+ valid = ceph_is_any_caps(inode);
else
valid = 1;
}
From: Nicolas Boichat <[email protected]>
[ Upstream commit 9e4dbc4646a84b2562ea7c64a542740687ff7daf ]
Add 2 additional hammer-like devices.
Signed-off-by: Nicolas Boichat <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-google-hammer.c | 4 ++++
drivers/hid/hid-ids.h | 2 ++
2 files changed, 6 insertions(+)
diff --git a/drivers/hid/hid-google-hammer.c b/drivers/hid/hid-google-hammer.c
index ee5e0bdcf078f..154f1ce771d54 100644
--- a/drivers/hid/hid-google-hammer.c
+++ b/drivers/hid/hid-google-hammer.c
@@ -469,6 +469,10 @@ static int hammer_probe(struct hid_device *hdev,
static const struct hid_device_id hammer_devices[] = {
{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_HAMMER) },
+ { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
+ USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_MAGNEMITE) },
+ { HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
+ USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_MASTERBALL) },
{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
USB_VENDOR_ID_GOOGLE, USB_DEVICE_ID_GOOGLE_STAFF) },
{ HID_DEVICE(BUS_USB, HID_GROUP_GENERIC,
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index e4d51ce20a6aa..9cf5a95c1bd3c 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -475,6 +475,8 @@
#define USB_DEVICE_ID_GOOGLE_STAFF 0x502b
#define USB_DEVICE_ID_GOOGLE_WAND 0x502d
#define USB_DEVICE_ID_GOOGLE_WHISKERS 0x5030
+#define USB_DEVICE_ID_GOOGLE_MASTERBALL 0x503c
+#define USB_DEVICE_ID_GOOGLE_MAGNEMITE 0x503d
#define USB_VENDOR_ID_GOTOP 0x08f2
#define USB_DEVICE_ID_SUPER_Q2 0x007f
--
2.20.1
From: Al Viro <[email protected]>
commit 1f08529c84cfecaf1261ed9b7e17fab18541c58f upstream.
We should not play with dcache without parent locked...
Cc: [email protected]
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ceph/inode.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -1432,6 +1432,7 @@ retry_lookup:
dout(" final dn %p\n", dn);
} else if ((req->r_op == CEPH_MDS_OP_LOOKUPSNAP ||
req->r_op == CEPH_MDS_OP_MKSNAP) &&
+ test_bit(CEPH_MDS_R_PARENT_LOCKED, &req->r_req_flags) &&
!test_bit(CEPH_MDS_R_ABORTED, &req->r_req_flags)) {
struct inode *dir = req->r_parent;
From: Zhenfang Wang <[email protected]>
[ Upstream commit 8b6bc5fd71e677864d1a3b896b3069a6e0c5e214 ]
We will set the link-list pointer register point to next link-list
configuration's physical address, which can load DMA configuration
from the link-list node automatically.
But the link-list node's physical address can be larger than 32bits,
and now Spreadtrum DMA driver only supports 32bits physical address,
which may cause loading a incorrect DMA configuration when starting
the link-list transfer mode. According to the DMA datasheet, we can
use SRC_BLK_STEP register (bit28 - bit31) to save the high bits of the
link-list node's physical address to fix this issue.
Fixes: 4ac695464763 ("dmaengine: sprd: Support DMA link-list mode")
Signed-off-by: Zhenfang Wang <[email protected]>
Signed-off-by: Baolin Wang <[email protected]>
Link: https://lore.kernel.org/r/eadfe9295499efa003e1c344e67e2890f9d1d780.1568267061.git.baolin.wang@linaro.org
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/sprd-dma.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index 525dc7338fe3b..a4a91f233121a 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -134,6 +134,10 @@
#define SPRD_DMA_SRC_TRSF_STEP_OFFSET 0
#define SPRD_DMA_TRSF_STEP_MASK GENMASK(15, 0)
+/* SPRD DMA_SRC_BLK_STEP register definition */
+#define SPRD_DMA_LLIST_HIGH_MASK GENMASK(31, 28)
+#define SPRD_DMA_LLIST_HIGH_SHIFT 28
+
/* define DMA channel mode & trigger mode mask */
#define SPRD_DMA_CHN_MODE_MASK GENMASK(7, 0)
#define SPRD_DMA_TRG_MODE_MASK GENMASK(7, 0)
@@ -717,6 +721,7 @@ static int sprd_dma_fill_desc(struct dma_chan *chan,
u32 int_mode = flags & SPRD_DMA_INT_MASK;
int src_datawidth, dst_datawidth, src_step, dst_step;
u32 temp, fix_mode = 0, fix_en = 0;
+ phys_addr_t llist_ptr;
if (dir == DMA_MEM_TO_DEV) {
src_step = sprd_dma_get_step(slave_cfg->src_addr_width);
@@ -814,13 +819,16 @@ static int sprd_dma_fill_desc(struct dma_chan *chan,
* Set the link-list pointer point to next link-list
* configuration's physical address.
*/
- hw->llist_ptr = schan->linklist.phy_addr + temp;
+ llist_ptr = schan->linklist.phy_addr + temp;
+ hw->llist_ptr = lower_32_bits(llist_ptr);
+ hw->src_blk_step = (upper_32_bits(llist_ptr) << SPRD_DMA_LLIST_HIGH_SHIFT) &
+ SPRD_DMA_LLIST_HIGH_MASK;
} else {
hw->llist_ptr = 0;
+ hw->src_blk_step = 0;
}
hw->frg_step = 0;
- hw->src_blk_step = 0;
hw->des_blk_step = 0;
return 0;
}
--
2.20.1
From: Jean-Baptiste Maneyrol <[email protected]>
commit 6e82ae6b8d11b948b74e71396efd8e074c415f44 upstream.
Some chips have a fifo overflow bit issue where the bit is always
set. The result is that every data is dropped.
Change fifo overflow management by checking fifo count against
a maximum value.
Add fifo size in chip hardware set of values.
Fixes: f5057e7b2dba ("iio: imu: inv_mpu6050: better fifo overflow handling")
Cc: [email protected]
Signed-off-by: Jean-Baptiste Maneyrol <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 9 +++++++++
drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 2 ++
drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 15 ++++++++++++---
3 files changed, 23 insertions(+), 3 deletions(-)
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -114,54 +114,63 @@ static const struct inv_mpu6050_hw hw_in
.name = "MPU6050",
.reg = ®_set_6050,
.config = &chip_config_6050,
+ .fifo_size = 1024,
},
{
.whoami = INV_MPU6500_WHOAMI_VALUE,
.name = "MPU6500",
.reg = ®_set_6500,
.config = &chip_config_6050,
+ .fifo_size = 512,
},
{
.whoami = INV_MPU6515_WHOAMI_VALUE,
.name = "MPU6515",
.reg = ®_set_6500,
.config = &chip_config_6050,
+ .fifo_size = 512,
},
{
.whoami = INV_MPU6000_WHOAMI_VALUE,
.name = "MPU6000",
.reg = ®_set_6050,
.config = &chip_config_6050,
+ .fifo_size = 1024,
},
{
.whoami = INV_MPU9150_WHOAMI_VALUE,
.name = "MPU9150",
.reg = ®_set_6050,
.config = &chip_config_6050,
+ .fifo_size = 1024,
},
{
.whoami = INV_MPU9250_WHOAMI_VALUE,
.name = "MPU9250",
.reg = ®_set_6500,
.config = &chip_config_6050,
+ .fifo_size = 512,
},
{
.whoami = INV_MPU9255_WHOAMI_VALUE,
.name = "MPU9255",
.reg = ®_set_6500,
.config = &chip_config_6050,
+ .fifo_size = 512,
},
{
.whoami = INV_ICM20608_WHOAMI_VALUE,
.name = "ICM20608",
.reg = ®_set_6500,
.config = &chip_config_6050,
+ .fifo_size = 512,
},
{
.whoami = INV_ICM20602_WHOAMI_VALUE,
.name = "ICM20602",
.reg = ®_set_icm20602,
.config = &chip_config_6050,
+ .fifo_size = 1008,
},
};
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -100,12 +100,14 @@ struct inv_mpu6050_chip_config {
* @name: name of the chip.
* @reg: register map of the chip.
* @config: configuration of the chip.
+ * @fifo_size: size of the FIFO in bytes.
*/
struct inv_mpu6050_hw {
u8 whoami;
u8 *name;
const struct inv_mpu6050_reg_map *reg;
const struct inv_mpu6050_chip_config *config;
+ size_t fifo_size;
};
/*
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
@@ -180,9 +180,6 @@ irqreturn_t inv_mpu6050_read_fifo(int ir
"failed to ack interrupt\n");
goto flush_fifo;
}
- /* handle fifo overflow by reseting fifo */
- if (int_status & INV_MPU6050_BIT_FIFO_OVERFLOW_INT)
- goto flush_fifo;
if (!(int_status & INV_MPU6050_BIT_RAW_DATA_RDY_INT)) {
dev_warn(regmap_get_device(st->map),
"spurious interrupt with status 0x%x\n", int_status);
@@ -211,6 +208,18 @@ irqreturn_t inv_mpu6050_read_fifo(int ir
if (result)
goto end_session;
fifo_count = get_unaligned_be16(&data[0]);
+
+ /*
+ * Handle fifo overflow by resetting fifo.
+ * Reset if there is only 3 data set free remaining to mitigate
+ * possible delay between reading fifo count and fifo data.
+ */
+ nb = 3 * bytes_per_datum;
+ if (fifo_count >= st->hw->fifo_size - nb) {
+ dev_warn(regmap_get_device(st->map), "fifo overflow reset\n");
+ goto flush_fifo;
+ }
+
/* compute and process all complete datum */
nb = fifo_count / bytes_per_datum;
inv_mpu6050_update_period(st, pf->timestamp, nb);
From: Andreas Klinger <[email protected]>
commit 431f7667bd6889a274913162dfd19cce9d84848e upstream.
The measured time value in the driver is limited to the maximum distance
which can be read by the sensor. This limitation was wrong and is fixed
by this patch.
It also takes into account that we are supporting a variety of sensors
today and that the recently added sensors have a higher maximum
distance range.
Changes in v2:
- Added a Tested-by
Suggested-by: Zbyněk Kocur <[email protected]>
Tested-by: Zbyněk Kocur <[email protected]>
Signed-off-by: Andreas Klinger <[email protected]>
Cc:<[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iio/proximity/srf04.c | 29 +++++++++++++++--------------
1 file changed, 15 insertions(+), 14 deletions(-)
--- a/drivers/iio/proximity/srf04.c
+++ b/drivers/iio/proximity/srf04.c
@@ -110,7 +110,7 @@ static int srf04_read(struct srf04_data
udelay(data->cfg->trigger_pulse_us);
gpiod_set_value(data->gpiod_trig, 0);
- /* it cannot take more than 20 ms */
+ /* it should not take more than 20 ms until echo is rising */
ret = wait_for_completion_killable_timeout(&data->rising, HZ/50);
if (ret < 0) {
mutex_unlock(&data->lock);
@@ -120,7 +120,8 @@ static int srf04_read(struct srf04_data
return -ETIMEDOUT;
}
- ret = wait_for_completion_killable_timeout(&data->falling, HZ/50);
+ /* it cannot take more than 50 ms until echo is falling */
+ ret = wait_for_completion_killable_timeout(&data->falling, HZ/20);
if (ret < 0) {
mutex_unlock(&data->lock);
return ret;
@@ -135,19 +136,19 @@ static int srf04_read(struct srf04_data
dt_ns = ktime_to_ns(ktime_dt);
/*
- * measuring more than 3 meters is beyond the capabilities of
- * the sensor
+ * measuring more than 6,45 meters is beyond the capabilities of
+ * the supported sensors
* ==> filter out invalid results for not measuring echos of
* another us sensor
*
* formula:
- * distance 3 m
- * time = ---------- = --------- = 9404389 ns
- * speed 319 m/s
+ * distance 6,45 * 2 m
+ * time = ---------- = ------------ = 40438871 ns
+ * speed 319 m/s
*
* using a minimum speed at -20 °C of 319 m/s
*/
- if (dt_ns > 9404389)
+ if (dt_ns > 40438871)
return -EIO;
time_ns = dt_ns;
@@ -159,20 +160,20 @@ static int srf04_read(struct srf04_data
* with Temp in °C
* and speed in m/s
*
- * use 343 m/s as ultrasonic speed at 20 °C here in absence of the
+ * use 343,5 m/s as ultrasonic speed at 20 °C here in absence of the
* temperature
*
* therefore:
- * time 343
- * distance = ------ * -----
- * 10^6 2
+ * time 343,5 time * 106
+ * distance = ------ * ------- = ------------
+ * 10^6 2 617176
* with time in ns
* and distance in mm (one way)
*
- * because we limit to 3 meters the multiplication with 343 just
+ * because we limit to 6,45 meters the multiplication with 106 just
* fits into 32 bit
*/
- distance_mm = time_ns * 343 / 2000000;
+ distance_mm = time_ns * 106 / 617176;
return distance_mm;
}
From: Radhey Shyam Pandey <[email protected]>
[ Upstream commit 6c6de1ddb1be3840f2ed5cc9d009a622720940c9 ]
In vdma_channel_set_config clear the delay, frame count and master mask
before updating their new values. It avoids programming incorrect state
when input parameters are different from default.
Signed-off-by: Radhey Shyam Pandey <[email protected]>
Acked-by: Appana Durga Kedareswara rao <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/xilinx/xilinx_dma.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index 1fbe0258578b0..5d56f1e4d332c 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -68,6 +68,9 @@
#define XILINX_DMA_DMACR_CIRC_EN BIT(1)
#define XILINX_DMA_DMACR_RUNSTOP BIT(0)
#define XILINX_DMA_DMACR_FSYNCSRC_MASK GENMASK(6, 5)
+#define XILINX_DMA_DMACR_DELAY_MASK GENMASK(31, 24)
+#define XILINX_DMA_DMACR_FRAME_COUNT_MASK GENMASK(23, 16)
+#define XILINX_DMA_DMACR_MASTER_MASK GENMASK(11, 8)
#define XILINX_DMA_REG_DMASR 0x0004
#define XILINX_DMA_DMASR_EOL_LATE_ERR BIT(15)
@@ -2118,8 +2121,10 @@ int xilinx_vdma_channel_set_config(struct dma_chan *dchan,
chan->config.gen_lock = cfg->gen_lock;
chan->config.master = cfg->master;
+ dmacr &= ~XILINX_DMA_DMACR_GENLOCK_EN;
if (cfg->gen_lock && chan->genlock) {
dmacr |= XILINX_DMA_DMACR_GENLOCK_EN;
+ dmacr &= ~XILINX_DMA_DMACR_MASTER_MASK;
dmacr |= cfg->master << XILINX_DMA_DMACR_MASTER_SHIFT;
}
@@ -2135,11 +2140,13 @@ int xilinx_vdma_channel_set_config(struct dma_chan *dchan,
chan->config.delay = cfg->delay;
if (cfg->coalesc <= XILINX_DMA_DMACR_FRAME_COUNT_MAX) {
+ dmacr &= ~XILINX_DMA_DMACR_FRAME_COUNT_MASK;
dmacr |= cfg->coalesc << XILINX_DMA_DMACR_FRAME_COUNT_SHIFT;
chan->config.coalesc = cfg->coalesc;
}
if (cfg->delay <= XILINX_DMA_DMACR_DELAY_MAX) {
+ dmacr &= ~XILINX_DMA_DMACR_DELAY_MASK;
dmacr |= cfg->delay << XILINX_DMA_DMACR_DELAY_SHIFT;
chan->config.delay = cfg->delay;
}
--
2.20.1
From: Christophe Leroy <[email protected]>
[ Upstream commit d10f60ae27d26d811e2a1bb39ded47df96d7499f ]
Make sure starting addr is aligned to segment boundary so that when
incrementing the segment, the starting address of the new segment is
below the end address. Otherwise the last segment might get missed.
Fixes: a68c31fc01ef ("powerpc/32s: Implement Kernel Userspace Access Protection")
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/067a1b09f15f421d40797c2d04c22d4049a1cee8.1571071875.git.christophe.leroy@c-s.fr
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/include/asm/book3s/32/kup.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/powerpc/include/asm/book3s/32/kup.h b/arch/powerpc/include/asm/book3s/32/kup.h
index 677e9babef801..f9dc597b0b868 100644
--- a/arch/powerpc/include/asm/book3s/32/kup.h
+++ b/arch/powerpc/include/asm/book3s/32/kup.h
@@ -91,6 +91,7 @@
static inline void kuap_update_sr(u32 sr, u32 addr, u32 end)
{
+ addr &= 0xf0000000; /* align addr to start of segment */
barrier(); /* make sure thread.kuap is updated before playing with SRs */
while (addr < end) {
mtsrin(sr, addr);
--
2.20.1
From: Ondrej Jirman <[email protected]>
commit e690053e97e7a9c968df9a97cef9089dfa8e6a44 upstream.
PRCM_PWROFF_GATING_REG has CPU0 at bit 4 on A83T. So without this
patch, instead of gating the CPU0, the whole cluster was power gated,
when shutting down first CPU in the cluster.
Fixes: 6961275e72a8c1 ("ARM: sun8i: smp: Add support for A83T")
Signed-off-by: Ondrej Jirman <[email protected]>
Acked-by: Chen-Yu Tsai <[email protected]>
Cc: [email protected]
Signed-off-by: Maxime Ripard <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/mach-sunxi/mc_smp.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/arch/arm/mach-sunxi/mc_smp.c
+++ b/arch/arm/mach-sunxi/mc_smp.c
@@ -481,14 +481,18 @@ static void sunxi_mc_smp_cpu_die(unsigne
static int sunxi_cpu_powerdown(unsigned int cpu, unsigned int cluster)
{
u32 reg;
+ int gating_bit = cpu;
pr_debug("%s: cluster %u cpu %u\n", __func__, cluster, cpu);
if (cpu >= SUNXI_CPUS_PER_CLUSTER || cluster >= SUNXI_NR_CLUSTERS)
return -EINVAL;
+ if (is_a83t && cpu == 0)
+ gating_bit = 4;
+
/* gate processor power */
reg = readl(prcm_base + PRCM_PWROFF_GATING_REG(cluster));
- reg |= PRCM_PWROFF_GATING_REG_CORE(cpu);
+ reg |= PRCM_PWROFF_GATING_REG_CORE(gating_bit);
writel(reg, prcm_base + PRCM_PWROFF_GATING_REG(cluster));
udelay(20);
From: Krishnamraju Eraparaju <[email protected]>
[ Upstream commit e17fa5c95ef2434a08e0be217969d246d037f0c2 ]
As siw_free_qp() is the last routine to access 'siw_base_qp' structure,
freeing this structure early in siw_destroy_qp() could cause
touch-after-free issue.
Hence, moved kfree(siw_base_qp) from siw_destroy_qp() to siw_free_qp().
Fixes: 303ae1cdfdf7 ("rdma/siw: application interface")
Signed-off-by: Krishnamraju Eraparaju <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/sw/siw/siw_qp.c | 2 ++
drivers/infiniband/sw/siw/siw_verbs.c | 2 --
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/sw/siw/siw_qp.c b/drivers/infiniband/sw/siw/siw_qp.c
index 52d402f39df93..b4317480cee74 100644
--- a/drivers/infiniband/sw/siw/siw_qp.c
+++ b/drivers/infiniband/sw/siw/siw_qp.c
@@ -1312,6 +1312,7 @@ int siw_qp_add(struct siw_device *sdev, struct siw_qp *qp)
void siw_free_qp(struct kref *ref)
{
struct siw_qp *found, *qp = container_of(ref, struct siw_qp, ref);
+ struct siw_base_qp *siw_base_qp = to_siw_base_qp(qp->ib_qp);
struct siw_device *sdev = qp->sdev;
unsigned long flags;
@@ -1334,4 +1335,5 @@ void siw_free_qp(struct kref *ref)
atomic_dec(&sdev->num_qp);
siw_dbg_qp(qp, "free QP\n");
kfree_rcu(qp, rcu);
+ kfree(siw_base_qp);
}
diff --git a/drivers/infiniband/sw/siw/siw_verbs.c b/drivers/infiniband/sw/siw/siw_verbs.c
index da52c90e06d48..ac08d84d84cbf 100644
--- a/drivers/infiniband/sw/siw/siw_verbs.c
+++ b/drivers/infiniband/sw/siw/siw_verbs.c
@@ -603,7 +603,6 @@ out:
int siw_destroy_qp(struct ib_qp *base_qp, struct ib_udata *udata)
{
struct siw_qp *qp = to_siw_qp(base_qp);
- struct siw_base_qp *siw_base_qp = to_siw_base_qp(base_qp);
struct siw_ucontext *uctx =
rdma_udata_to_drv_context(udata, struct siw_ucontext,
base_ucontext);
@@ -640,7 +639,6 @@ int siw_destroy_qp(struct ib_qp *base_qp, struct ib_udata *udata)
qp->scq = qp->rcq = NULL;
siw_qp_put(qp);
- kfree(siw_base_qp);
return 0;
}
--
2.20.1
From: Kamal Heib <[email protected]>
[ Upstream commit b806c94ee44e53233b8ce6c92d9078d9781786a5 ]
Remove spaces from the reported firmware version string.
Actual value:
$ cat /sys/class/infiniband/qedr0/fw_ver
8. 37. 7. 0
Expected value:
$ cat /sys/class/infiniband/qedr0/fw_ver
8.37.7.0
Fixes: ec72fce401c6 ("qedr: Add support for RoCE HW init")
Signed-off-by: Kamal Heib <[email protected]>
Acked-by: Michal Kalderon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/qedr/main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/hw/qedr/main.c b/drivers/infiniband/hw/qedr/main.c
index f97b3d65b30cc..2fef7a48f77bf 100644
--- a/drivers/infiniband/hw/qedr/main.c
+++ b/drivers/infiniband/hw/qedr/main.c
@@ -76,7 +76,7 @@ static void qedr_get_dev_fw_str(struct ib_device *ibdev, char *str)
struct qedr_dev *qedr = get_qedr_dev(ibdev);
u32 fw_ver = (u32)qedr->attr.fw_ver;
- snprintf(str, IB_FW_VERSION_NAME_MAX, "%d. %d. %d. %d",
+ snprintf(str, IB_FW_VERSION_NAME_MAX, "%d.%d.%d.%d",
(fw_ver >> 24) & 0xFF, (fw_ver >> 16) & 0xFF,
(fw_ver >> 8) & 0xFF, fw_ver & 0xFF);
}
--
2.20.1
From: Tariq Toukan <[email protected]>
[ Upstream commit 0c258dec8d98af15b34dbffdb89c008b6da01ff8 ]
Cited patch removed the assumption only in datapath.
Here we remove it also form control/cleanup flow.
Fixes: 9ab0233728ca ("net/mlx5e: Tx, Don't implicitly assume SKB-less wqe has one WQEBB")
Signed-off-by: Tariq Toukan <[email protected]>
Reviewed-by: Eran Ben Elisha <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 6 +++++-
drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 4 ++--
2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 9d5f6e56188f8..f3a2970c3fcf0 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -1347,9 +1347,13 @@ static void mlx5e_deactivate_txqsq(struct mlx5e_txqsq *sq)
/* last doorbell out, godspeed .. */
if (mlx5e_wqc_has_room_for(wq, sq->cc, sq->pc, 1)) {
u16 pi = mlx5_wq_cyc_ctr2ix(wq, sq->pc);
+ struct mlx5e_tx_wqe_info *wi;
struct mlx5e_tx_wqe *nop;
- sq->db.wqe_info[pi].skb = NULL;
+ wi = &sq->db.wqe_info[pi];
+
+ memset(wi, 0, sizeof(*wi));
+ wi->num_wqebbs = 1;
nop = mlx5e_post_nop(wq, sq->sqn, &sq->pc);
mlx5e_notify_hw(wq, sq->pc, sq->uar_map, &nop->ctrl);
}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
index 600e92cb629a2..9aaf74407a11f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
@@ -551,8 +551,8 @@ void mlx5e_free_txqsq_descs(struct mlx5e_txqsq *sq)
wi = &sq->db.wqe_info[ci];
skb = wi->skb;
- if (!skb) { /* nop */
- sq->cc++;
+ if (!skb) {
+ sq->cc += wi->num_wqebbs;
continue;
}
--
2.20.1
From: Takashi Iwai <[email protected]>
commit e0ccdef92653f8867e2d1667facfd3c23699f540 upstream.
The primary changes in this patch are cleanups of __check_input_term()
and move to a non-nested switch-case block by evaluating the pair of
UAC version and the unit type, as we've done for parse_audio_unit().
Also each parser is split into the function for readability.
Now, a slight behavior change by this cleanup is the handling of
processing and extension units. Formerly we've dealt with them
differently between UAC1/2 and UAC3; the latter returns an error if no
input sources are available, while the former continues to parse.
In this patch, unify the behavior in all cases: when input sources are
available, it parses recursively, then override the type and the id,
as well as channel information if not provided yet.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/mixer.c | 407 ++++++++++++++++++++++++++++--------------------------
1 file changed, 212 insertions(+), 195 deletions(-)
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -758,224 +758,242 @@ static int uac_mixer_unit_get_channels(s
}
/*
- * parse the source unit recursively until it reaches to a terminal
- * or a branched unit.
+ * Parse Input Terminal Unit
*/
static int __check_input_term(struct mixer_build *state, int id,
- struct usb_audio_term *term)
+ struct usb_audio_term *term);
+
+static int parse_term_uac1_iterm_unit(struct mixer_build *state,
+ struct usb_audio_term *term,
+ void *p1, int id)
+{
+ struct uac_input_terminal_descriptor *d = p1;
+
+ term->type = le16_to_cpu(d->wTerminalType);
+ term->channels = d->bNrChannels;
+ term->chconfig = le16_to_cpu(d->wChannelConfig);
+ term->name = d->iTerminal;
+ return 0;
+}
+
+static int parse_term_uac2_iterm_unit(struct mixer_build *state,
+ struct usb_audio_term *term,
+ void *p1, int id)
{
- int protocol = state->mixer->protocol;
+ struct uac2_input_terminal_descriptor *d = p1;
int err;
- void *p1;
- unsigned char *hdr;
- memset(term, 0, sizeof(*term));
- for (;;) {
- /* a loop in the terminal chain? */
- if (test_and_set_bit(id, state->termbitmap))
- return -EINVAL;
+ /* call recursively to verify the referenced clock entity */
+ err = __check_input_term(state, d->bCSourceID, term);
+ if (err < 0)
+ return err;
- p1 = find_audio_control_unit(state, id);
- if (!p1)
- break;
- if (!snd_usb_validate_audio_desc(p1, protocol))
- break; /* bad descriptor */
+ /* save input term properties after recursion,
+ * to ensure they are not overriden by the recursion calls
+ */
+ term->id = id;
+ term->type = le16_to_cpu(d->wTerminalType);
+ term->channels = d->bNrChannels;
+ term->chconfig = le32_to_cpu(d->bmChannelConfig);
+ term->name = d->iTerminal;
+ return 0;
+}
- hdr = p1;
- term->id = id;
+static int parse_term_uac3_iterm_unit(struct mixer_build *state,
+ struct usb_audio_term *term,
+ void *p1, int id)
+{
+ struct uac3_input_terminal_descriptor *d = p1;
+ int err;
- if (protocol == UAC_VERSION_1 || protocol == UAC_VERSION_2) {
- switch (hdr[2]) {
- case UAC_INPUT_TERMINAL:
- if (protocol == UAC_VERSION_1) {
- struct uac_input_terminal_descriptor *d = p1;
-
- term->type = le16_to_cpu(d->wTerminalType);
- term->channels = d->bNrChannels;
- term->chconfig = le16_to_cpu(d->wChannelConfig);
- term->name = d->iTerminal;
- } else { /* UAC_VERSION_2 */
- struct uac2_input_terminal_descriptor *d = p1;
-
- /* call recursively to verify that the
- * referenced clock entity is valid */
- err = __check_input_term(state, d->bCSourceID, term);
- if (err < 0)
- return err;
-
- /* save input term properties after recursion,
- * to ensure they are not overriden by the
- * recursion calls */
- term->id = id;
- term->type = le16_to_cpu(d->wTerminalType);
- term->channels = d->bNrChannels;
- term->chconfig = le32_to_cpu(d->bmChannelConfig);
- term->name = d->iTerminal;
- }
- return 0;
- case UAC_FEATURE_UNIT: {
- /* the header is the same for v1 and v2 */
- struct uac_feature_unit_descriptor *d = p1;
+ /* call recursively to verify the referenced clock entity */
+ err = __check_input_term(state, d->bCSourceID, term);
+ if (err < 0)
+ return err;
- id = d->bSourceID;
- break; /* continue to parse */
- }
- case UAC_MIXER_UNIT: {
- struct uac_mixer_unit_descriptor *d = p1;
+ /* save input term properties after recursion,
+ * to ensure they are not overriden by the recursion calls
+ */
+ term->id = id;
+ term->type = le16_to_cpu(d->wTerminalType);
- term->type = UAC3_MIXER_UNIT << 16; /* virtual type */
- term->channels = uac_mixer_unit_bNrChannels(d);
- term->chconfig = uac_mixer_unit_wChannelConfig(d, protocol);
- term->name = uac_mixer_unit_iMixer(d);
- return 0;
- }
- case UAC_SELECTOR_UNIT:
- case UAC2_CLOCK_SELECTOR: {
- struct uac_selector_unit_descriptor *d = p1;
- /* call recursively to retrieve the channel info */
- err = __check_input_term(state, d->baSourceID[0], term);
- if (err < 0)
- return err;
- term->type = UAC3_SELECTOR_UNIT << 16; /* virtual type */
- term->id = id;
- term->name = uac_selector_unit_iSelector(d);
- return 0;
- }
- case UAC1_PROCESSING_UNIT:
- /* UAC2_EFFECT_UNIT */
- if (protocol == UAC_VERSION_1)
- term->type = UAC3_PROCESSING_UNIT << 16; /* virtual type */
- else /* UAC_VERSION_2 */
- term->type = UAC3_EFFECT_UNIT << 16; /* virtual type */
- /* fall through */
- case UAC1_EXTENSION_UNIT:
- /* UAC2_PROCESSING_UNIT_V2 */
- if (protocol == UAC_VERSION_1 && !term->type)
- term->type = UAC3_EXTENSION_UNIT << 16; /* virtual type */
- else if (protocol == UAC_VERSION_2 && !term->type)
- term->type = UAC3_PROCESSING_UNIT << 16; /* virtual type */
- /* fall through */
- case UAC2_EXTENSION_UNIT_V2: {
- struct uac_processing_unit_descriptor *d = p1;
-
- if (protocol == UAC_VERSION_2 &&
- hdr[2] == UAC2_EFFECT_UNIT) {
- /* UAC2/UAC1 unit IDs overlap here in an
- * uncompatible way. Ignore this unit for now.
- */
- return 0;
- }
+ err = get_cluster_channels_v3(state, le16_to_cpu(d->wClusterDescrID));
+ if (err < 0)
+ return err;
+ term->channels = err;
- if (d->bNrInPins) {
- id = d->baSourceID[0];
- break; /* continue to parse */
- }
- if (!term->type)
- term->type = UAC3_EXTENSION_UNIT << 16; /* virtual type */
+ /* REVISIT: UAC3 IT doesn't have channels cfg */
+ term->chconfig = 0;
- term->channels = uac_processing_unit_bNrChannels(d);
- term->chconfig = uac_processing_unit_wChannelConfig(d, protocol);
- term->name = uac_processing_unit_iProcessing(d, protocol);
- return 0;
- }
- case UAC2_CLOCK_SOURCE: {
- struct uac_clock_source_descriptor *d = p1;
+ term->name = le16_to_cpu(d->wTerminalDescrStr);
+ return 0;
+}
- term->type = UAC3_CLOCK_SOURCE << 16; /* virtual type */
- term->id = id;
- term->name = d->iClockSource;
- return 0;
- }
- default:
- return -ENODEV;
- }
- } else { /* UAC_VERSION_3 */
- switch (hdr[2]) {
- case UAC_INPUT_TERMINAL: {
- struct uac3_input_terminal_descriptor *d = p1;
-
- /* call recursively to verify that the
- * referenced clock entity is valid */
- err = __check_input_term(state, d->bCSourceID, term);
- if (err < 0)
- return err;
-
- /* save input term properties after recursion,
- * to ensure they are not overriden by the
- * recursion calls */
- term->id = id;
- term->type = le16_to_cpu(d->wTerminalType);
-
- err = get_cluster_channels_v3(state, le16_to_cpu(d->wClusterDescrID));
- if (err < 0)
- return err;
- term->channels = err;
+static int parse_term_mixer_unit(struct mixer_build *state,
+ struct usb_audio_term *term,
+ void *p1, int id)
+{
+ struct uac_mixer_unit_descriptor *d = p1;
+ int protocol = state->mixer->protocol;
+ int err;
- /* REVISIT: UAC3 IT doesn't have channels cfg */
- term->chconfig = 0;
+ err = uac_mixer_unit_get_channels(state, d);
+ if (err <= 0)
+ return err;
- term->name = le16_to_cpu(d->wTerminalDescrStr);
- return 0;
- }
- case UAC3_FEATURE_UNIT: {
- struct uac3_feature_unit_descriptor *d = p1;
+ term->type = UAC3_MIXER_UNIT << 16; /* virtual type */
+ term->channels = err;
+ if (protocol != UAC_VERSION_3) {
+ term->chconfig = uac_mixer_unit_wChannelConfig(d, protocol);
+ term->name = uac_mixer_unit_iMixer(d);
+ }
+ return 0;
+}
- id = d->bSourceID;
- break; /* continue to parse */
- }
- case UAC3_CLOCK_SOURCE: {
- struct uac3_clock_source_descriptor *d = p1;
+static int parse_term_selector_unit(struct mixer_build *state,
+ struct usb_audio_term *term,
+ void *p1, int id)
+{
+ struct uac_selector_unit_descriptor *d = p1;
+ int err;
- term->type = UAC3_CLOCK_SOURCE << 16; /* virtual type */
- term->id = id;
- term->name = le16_to_cpu(d->wClockSourceStr);
- return 0;
- }
- case UAC3_MIXER_UNIT: {
- struct uac_mixer_unit_descriptor *d = p1;
+ /* call recursively to retrieve the channel info */
+ err = __check_input_term(state, d->baSourceID[0], term);
+ if (err < 0)
+ return err;
+ term->type = UAC3_SELECTOR_UNIT << 16; /* virtual type */
+ term->id = id;
+ if (state->mixer->protocol != UAC_VERSION_3)
+ term->name = uac_selector_unit_iSelector(d);
+ return 0;
+}
- err = uac_mixer_unit_get_channels(state, d);
- if (err <= 0)
- return err;
+static int parse_term_proc_unit(struct mixer_build *state,
+ struct usb_audio_term *term,
+ void *p1, int id, int vtype)
+{
+ struct uac_processing_unit_descriptor *d = p1;
+ int protocol = state->mixer->protocol;
+ int err;
- term->channels = err;
- term->type = UAC3_MIXER_UNIT << 16; /* virtual type */
+ if (d->bNrInPins) {
+ /* call recursively to retrieve the channel info */
+ err = __check_input_term(state, d->baSourceID[0], term);
+ if (err < 0)
+ return err;
+ }
- return 0;
- }
- case UAC3_SELECTOR_UNIT:
- case UAC3_CLOCK_SELECTOR: {
- struct uac_selector_unit_descriptor *d = p1;
- /* call recursively to retrieve the channel info */
- err = __check_input_term(state, d->baSourceID[0], term);
- if (err < 0)
- return err;
- term->type = UAC3_SELECTOR_UNIT << 16; /* virtual type */
- term->id = id;
- term->name = 0; /* TODO: UAC3 Class-specific strings */
+ term->type = vtype << 16; /* virtual type */
+ term->id = id;
- return 0;
- }
- case UAC3_PROCESSING_UNIT: {
- struct uac_processing_unit_descriptor *d = p1;
+ if (protocol == UAC_VERSION_3)
+ return 0;
- if (!d->bNrInPins)
- return -EINVAL;
+ if (!term->channels) {
+ term->channels = uac_processing_unit_bNrChannels(d);
+ term->chconfig = uac_processing_unit_wChannelConfig(d, protocol);
+ }
+ term->name = uac_processing_unit_iProcessing(d, protocol);
+ return 0;
+}
+
+static int parse_term_uac2_clock_source(struct mixer_build *state,
+ struct usb_audio_term *term,
+ void *p1, int id)
+{
+ struct uac_clock_source_descriptor *d = p1;
+
+ term->type = UAC3_CLOCK_SOURCE << 16; /* virtual type */
+ term->id = id;
+ term->name = d->iClockSource;
+ return 0;
+}
- /* call recursively to retrieve the channel info */
- err = __check_input_term(state, d->baSourceID[0], term);
- if (err < 0)
- return err;
-
- term->type = UAC3_PROCESSING_UNIT << 16; /* virtual type */
- term->id = id;
- term->name = 0; /* TODO: UAC3 Class-specific strings */
+static int parse_term_uac3_clock_source(struct mixer_build *state,
+ struct usb_audio_term *term,
+ void *p1, int id)
+{
+ struct uac3_clock_source_descriptor *d = p1;
+
+ term->type = UAC3_CLOCK_SOURCE << 16; /* virtual type */
+ term->id = id;
+ term->name = le16_to_cpu(d->wClockSourceStr);
+ return 0;
+}
- return 0;
- }
- default:
- return -ENODEV;
- }
+#define PTYPE(a, b) ((a) << 8 | (b))
+
+/*
+ * parse the source unit recursively until it reaches to a terminal
+ * or a branched unit.
+ */
+static int __check_input_term(struct mixer_build *state, int id,
+ struct usb_audio_term *term)
+{
+ int protocol = state->mixer->protocol;
+ void *p1;
+ unsigned char *hdr;
+
+ for (;;) {
+ /* a loop in the terminal chain? */
+ if (test_and_set_bit(id, state->termbitmap))
+ return -EINVAL;
+
+ p1 = find_audio_control_unit(state, id);
+ if (!p1)
+ break;
+ if (!snd_usb_validate_audio_desc(p1, protocol))
+ break; /* bad descriptor */
+
+ hdr = p1;
+ term->id = id;
+
+ switch (PTYPE(protocol, hdr[2])) {
+ case PTYPE(UAC_VERSION_1, UAC_FEATURE_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC_FEATURE_UNIT):
+ case PTYPE(UAC_VERSION_3, UAC3_FEATURE_UNIT): {
+ /* the header is the same for all versions */
+ struct uac_feature_unit_descriptor *d = p1;
+
+ id = d->bSourceID;
+ break; /* continue to parse */
+ }
+ case PTYPE(UAC_VERSION_1, UAC_INPUT_TERMINAL):
+ return parse_term_uac1_iterm_unit(state, term, p1, id);
+ case PTYPE(UAC_VERSION_2, UAC_INPUT_TERMINAL):
+ return parse_term_uac2_iterm_unit(state, term, p1, id);
+ case PTYPE(UAC_VERSION_3, UAC_INPUT_TERMINAL):
+ return parse_term_uac3_iterm_unit(state, term, p1, id);
+ case PTYPE(UAC_VERSION_1, UAC_MIXER_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC_MIXER_UNIT):
+ case PTYPE(UAC_VERSION_3, UAC3_MIXER_UNIT):
+ return parse_term_mixer_unit(state, term, p1, id);
+ case PTYPE(UAC_VERSION_1, UAC_SELECTOR_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC_SELECTOR_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC2_CLOCK_SELECTOR):
+ case PTYPE(UAC_VERSION_3, UAC3_SELECTOR_UNIT):
+ case PTYPE(UAC_VERSION_3, UAC3_CLOCK_SELECTOR):
+ return parse_term_selector_unit(state, term, p1, id);
+ case PTYPE(UAC_VERSION_1, UAC1_PROCESSING_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC2_PROCESSING_UNIT_V2):
+ case PTYPE(UAC_VERSION_3, UAC3_PROCESSING_UNIT):
+ return parse_term_proc_unit(state, term, p1, id,
+ UAC3_PROCESSING_UNIT);
+ case PTYPE(UAC_VERSION_2, UAC2_EFFECT_UNIT):
+ case PTYPE(UAC_VERSION_3, UAC3_EFFECT_UNIT):
+ return parse_term_proc_unit(state, term, p1, id,
+ UAC3_EFFECT_UNIT);
+ case PTYPE(UAC_VERSION_1, UAC1_EXTENSION_UNIT):
+ case PTYPE(UAC_VERSION_2, UAC2_EXTENSION_UNIT_V2):
+ case PTYPE(UAC_VERSION_3, UAC3_EXTENSION_UNIT):
+ return parse_term_proc_unit(state, term, p1, id,
+ UAC3_EXTENSION_UNIT);
+ case PTYPE(UAC_VERSION_2, UAC2_CLOCK_SOURCE):
+ return parse_term_uac2_clock_source(state, term, p1, id);
+ case PTYPE(UAC_VERSION_3, UAC3_CLOCK_SOURCE):
+ return parse_term_uac3_clock_source(state, term, p1, id);
+ default:
+ return -ENODEV;
}
}
return -ENODEV;
@@ -2712,7 +2730,6 @@ static int parse_audio_unit(struct mixer
return 0; /* skip invalid unit */
}
-#define PTYPE(a, b) ((a) << 8 | (b))
switch (PTYPE(protocol, p1[2])) {
case PTYPE(UAC_VERSION_1, UAC_INPUT_TERMINAL):
case PTYPE(UAC_VERSION_2, UAC_INPUT_TERMINAL):
From: Thomas Gleixner <[email protected]>
commit e361362b08cab1098b64b0e5fd8c879f086b3f46 upstream.
Cyrill reported the following crash:
BUG: unable to handle page fault for address: 0000000000001ff0
#PF: supervisor read access in kernel mode
RIP: 0010:get_stack_info+0xb3/0x148
It turns out that if the stack tracer is invoked before the exception stack
mappings are initialized in_exception_stack() can erroneously classify an
invalid address as an address inside of an exception stack:
begin = this_cpu_read(cea_exception_stacks); <- 0
end = begin + sizeof(exception stacks);
i.e. any address between 0 and end will be considered as exception stack
address and the subsequent code will then try to derefence the resulting
stack frame at a non mapped address.
end = begin + (unsigned long)ep->size;
==> end = 0x2000
regs = (struct pt_regs *)end - 1;
==> regs = 0x2000 - sizeof(struct pt_regs *) = 0x1ff0
info->next_sp = (unsigned long *)regs->sp;
==> Crashes due to accessing 0x1ff0
Prevent this by checking the validity of the cea_exception_stack base
address and bailing out if it is zero.
Fixes: afcd21dad88b ("x86/dumpstack/64: Use cpu_entry_area instead of orig_ist")
Reported-by: Cyrill Gorcunov <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Cyrill Gorcunov <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/dumpstack_64.c | 7 +++++++
1 file changed, 7 insertions(+)
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -94,6 +94,13 @@ static bool in_exception_stack(unsigned
BUILD_BUG_ON(N_EXCEPTION_STACKS != 6);
begin = (unsigned long)__this_cpu_read(cea_exception_stacks);
+ /*
+ * Handle the case where stack trace is collected _before_
+ * cea_exception_stacks had been initialized.
+ */
+ if (!begin)
+ return false;
+
end = begin + sizeof(struct cea_exception_stacks);
/* Bail if @stack is outside the exception stack area. */
if (stk < begin || stk >= end)
From: Alexander Shishkin <[email protected]>
commit 87c0b9c79ec136ea76a14a88d675a746bc6a87f9 upstream.
Commit 8116db57cf16 ("intel_th: Add switch triggering support") added
a trigger assertion of the CTS, but forgot to de-assert it at the end
of the sequence. This results in window switches randomly not happening.
Fix that by de-asserting the trigger at the end of the window switch
sequence.
Signed-off-by: Alexander Shishkin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Fixes: 8116db57cf16 ("intel_th: Add switch triggering support")
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwtracing/intel_th/gth.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/hwtracing/intel_th/gth.c
+++ b/drivers/hwtracing/intel_th/gth.c
@@ -626,6 +626,9 @@ static void intel_th_gth_switch(struct i
if (!count)
dev_dbg(&thdev->dev, "timeout waiting for CTS Trigger\n");
+ /* De-assert the trigger */
+ iowrite32(0, gth->base + REG_CTS_CTL);
+
intel_th_gth_stop(gth, output, false);
intel_th_gth_start(gth, output);
}
From: Stephane Grosjean <[email protected]>
commit de280f403f2996679e2607384980703710576fed upstream.
When decoding a buffer received from PCAN-USB, the first timestamp read in
a packet is a 16-bit coded time base, and the next ones are an 8-bit
offset to this base, regardless of the type of packet read.
This patch corrects a potential loss of synchronization by using a
timestamp index read from the buffer, rather than an index of received
data packets, to determine on the sizeof the timestamp to be read from the
packet being decoded.
Signed-off-by: Stephane Grosjean <[email protected]>
Fixes: 46be265d3388 ("can: usb: PEAK-System Technik PCAN-USB specific part")
Cc: linux-stable <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/peak_usb/pcan_usb.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
--- a/drivers/net/can/usb/peak_usb/pcan_usb.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb.c
@@ -100,7 +100,7 @@ struct pcan_usb_msg_context {
u8 *end;
u8 rec_cnt;
u8 rec_idx;
- u8 rec_data_idx;
+ u8 rec_ts_idx;
struct net_device *netdev;
struct pcan_usb *pdev;
};
@@ -547,10 +547,15 @@ static int pcan_usb_decode_status(struct
mc->ptr += PCAN_USB_CMD_ARGS;
if (status_len & PCAN_USB_STATUSLEN_TIMESTAMP) {
- int err = pcan_usb_decode_ts(mc, !mc->rec_idx);
+ int err = pcan_usb_decode_ts(mc, !mc->rec_ts_idx);
if (err)
return err;
+
+ /* Next packet in the buffer will have a timestamp on a single
+ * byte
+ */
+ mc->rec_ts_idx++;
}
switch (f) {
@@ -632,10 +637,13 @@ static int pcan_usb_decode_data(struct p
cf->can_dlc = get_can_dlc(rec_len);
- /* first data packet timestamp is a word */
- if (pcan_usb_decode_ts(mc, !mc->rec_data_idx))
+ /* Only first packet timestamp is a word */
+ if (pcan_usb_decode_ts(mc, !mc->rec_ts_idx))
goto decode_failed;
+ /* Next packet in the buffer will have a timestamp on a single byte */
+ mc->rec_ts_idx++;
+
/* read data */
memset(cf->data, 0x0, sizeof(cf->data));
if (status_len & PCAN_USB_STATUSLEN_RTR) {
@@ -688,7 +696,6 @@ static int pcan_usb_decode_msg(struct pe
/* handle normal can frames here */
} else {
err = pcan_usb_decode_data(&mc, sl);
- mc.rec_data_idx++;
}
}
From: Jan Beulich <[email protected]>
commit fe6f85ca121e9c74e7490fe66b0c5aae38e332c3 upstream.
The removal of the LDR initialization in the bigsmp_32 APIC code unearthed
a problem in setup_local_APIC().
The code checks unconditionally for a mismatch of the logical APIC id by
comparing the early APIC id which was initialized in get_smp_config() with
the actual LDR value in the APIC.
Due to the removal of the bogus LDR initialization the check now can
trigger on bigsmp_32 APIC systems emitting a warning for every booting
CPU. This is of course a false positive because the APIC is not using
logical destination mode.
Restrict the check and the possibly resulting fixup to systems which are
actually using the APIC in logical destination mode.
[ tglx: Massaged changelog and added Cc stable ]
Fixes: bae3a8d3308 ("x86/apic: Do not initialize LDR and DFR for bigsmp")
Signed-off-by: Jan Beulich <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/apic/apic.c | 28 +++++++++++++++-------------
1 file changed, 15 insertions(+), 13 deletions(-)
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1573,9 +1573,6 @@ static void setup_local_APIC(void)
{
int cpu = smp_processor_id();
unsigned int value;
-#ifdef CONFIG_X86_32
- int logical_apicid, ldr_apicid;
-#endif
if (disable_apic) {
@@ -1616,16 +1613,21 @@ static void setup_local_APIC(void)
apic->init_apic_ldr();
#ifdef CONFIG_X86_32
- /*
- * APIC LDR is initialized. If logical_apicid mapping was
- * initialized during get_smp_config(), make sure it matches the
- * actual value.
- */
- logical_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
- ldr_apicid = GET_APIC_LOGICAL_ID(apic_read(APIC_LDR));
- WARN_ON(logical_apicid != BAD_APICID && logical_apicid != ldr_apicid);
- /* always use the value from LDR */
- early_per_cpu(x86_cpu_to_logical_apicid, cpu) = ldr_apicid;
+ if (apic->dest_logical) {
+ int logical_apicid, ldr_apicid;
+
+ /*
+ * APIC LDR is initialized. If logical_apicid mapping was
+ * initialized during get_smp_config(), make sure it matches
+ * the actual value.
+ */
+ logical_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
+ ldr_apicid = GET_APIC_LOGICAL_ID(apic_read(APIC_LDR));
+ if (logical_apicid != BAD_APICID)
+ WARN_ON(logical_apicid != ldr_apicid);
+ /* Always use the value from LDR. */
+ early_per_cpu(x86_cpu_to_logical_apicid, cpu) = ldr_apicid;
+ }
#endif
/*
From: Pavel Shilovsky <[email protected]>
commit d243af7ab9feb49f11f2c0050d2077e2d9556f9b upstream.
When the client hits a network reconnect, it re-opens every open
file with a create context to reconnect a persistent handle. All
create context types should be 8-bytes aligned but the padding
was missed for that one. As a result, some servers don't allow
us to reconnect handles and return an error. The problem occurs
when the problematic context is not at the end of the create
request packet. Fix this by adding a proper padding at the end
of the reconnect persistent handle context.
Cc: Stable <[email protected]> # 4.19.x
Signed-off-by: Pavel Shilovsky <[email protected]>
Signed-off-by: Steve French <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/smb2pdu.h | 1 +
1 file changed, 1 insertion(+)
--- a/fs/cifs/smb2pdu.h
+++ b/fs/cifs/smb2pdu.h
@@ -836,6 +836,7 @@ struct create_durable_handle_reconnect_v
struct create_context ccontext;
__u8 Name[8];
struct durable_reconnect_context_v2 dcontext;
+ __u8 Pad[4];
} __packed;
/* See MS-SMB2 2.2.13.2.5 */
From: Joakim Zhang <[email protected]>
commit 5e269324db5adb2f5f6ec9a93a9c7b0672932b47 upstream.
The ECC (memory error detection and correction) mechanism can be
activated or not, controlled by the ECCDIS bit in CAN_MECR. When
disabled, updates on indications and reporting registers are stopped.
So if want to disable ECC completely, had better assert ECCDIS bit, not
just mask the related interrupts.
Fixes: cdce844865be ("can: flexcan: add vf610 support for FlexCAN")
Signed-off-by: Joakim Zhang <[email protected]>
Cc: linux-stable <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/flexcan.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -1169,6 +1169,7 @@ static int flexcan_chip_start(struct net
reg_mecr = priv->read(®s->mecr);
reg_mecr &= ~FLEXCAN_MECR_ECRWRDIS;
priv->write(reg_mecr, ®s->mecr);
+ reg_mecr |= FLEXCAN_MECR_ECCDIS;
reg_mecr &= ~(FLEXCAN_MECR_NCEFAFRZ | FLEXCAN_MECR_HANCEI_MSK |
FLEXCAN_MECR_FANCEI_MSK);
priv->write(reg_mecr, ®s->mecr);
From: Johan Hovold <[email protected]>
commit 4d6636498c41891d0482a914dd570343a838ad79 upstream.
The driver was accessing its driver data after having freed it.
Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Cc: stable <[email protected]> # 4.12
Cc: Remigiusz Kołłątaj <[email protected]>
Reported-by: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/mcba_usb.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c
@@ -876,9 +876,8 @@ static void mcba_usb_disconnect(struct u
netdev_info(priv->netdev, "device disconnected\n");
unregister_candev(priv->netdev);
- free_candev(priv->netdev);
-
mcba_urb_unlink(priv);
+ free_candev(priv->netdev);
}
static struct usb_driver mcba_usb_driver = {
From: Dan Carpenter <[email protected]>
commit 30b7244d79651460ff114ba8f7987ed94c86b99a upstream.
The copy_to_user() function returns the number of bytes remaining to be
copied. In this code, that positive return is checked at the end of the
function and we return zero/success. What we should do instead is
return -EFAULT.
Fixes: a7b4f989a629 ("netfilter: ipset: IP set core support")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Jozsef Kadlecsik <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netfilter/ipset/ip_set_core.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/net/netfilter/ipset/ip_set_core.c
+++ b/net/netfilter/ipset/ip_set_core.c
@@ -2069,8 +2069,9 @@ ip_set_sockfn_get(struct sock *sk, int o
}
req_version->version = IPSET_PROTOCOL;
- ret = copy_to_user(user, req_version,
- sizeof(struct ip_set_req_version));
+ if (copy_to_user(user, req_version,
+ sizeof(struct ip_set_req_version)))
+ ret = -EFAULT;
goto done;
}
case IP_SET_OP_GET_BYNAME: {
@@ -2129,7 +2130,8 @@ ip_set_sockfn_get(struct sock *sk, int o
} /* end of switch(op) */
copy:
- ret = copy_to_user(user, data, copylen);
+ if (copy_to_user(user, data, copylen))
+ ret = -EFAULT;
done:
vfree(data);
From: Al Viro <[email protected]>
commit 351e5d869e5ac10cb40c78b5f2d7dfc816ad4587 upstream.
Configfs abuses symlink(2). Unlike the normal filesystems, it
wants the target resolved at symlink(2) time, like link(2) would've
done. The problem is that ->symlink() is called with the parent
directory locked exclusive, so resolving the target inside the
->symlink() is easily deadlocked.
Short of really ugly games in sys_symlink() itself, all we can
do is to unlock the parent before resolving the target and
relock it after. However, that invalidates the checks done
by the caller of ->symlink(), so we have to
* check that dentry is still where it used to be
(it couldn't have been moved, but it could've been unhashed)
* recheck that it's still negative (somebody else
might've successfully created a symlink with the same name
while we were looking the target up)
* recheck the permissions on the parent directory.
Cc: [email protected]
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/configfs/symlink.c | 33 ++++++++++++++++++++++++++++++++-
1 file changed, 32 insertions(+), 1 deletion(-)
--- a/fs/configfs/symlink.c
+++ b/fs/configfs/symlink.c
@@ -143,11 +143,42 @@ int configfs_symlink(struct inode *dir,
!type->ct_item_ops->allow_link)
goto out_put;
+ /*
+ * This is really sick. What they wanted was a hybrid of
+ * link(2) and symlink(2) - they wanted the target resolved
+ * at syscall time (as link(2) would've done), be a directory
+ * (which link(2) would've refused to do) *AND* be a deep
+ * fucking magic, making the target busy from rmdir POV.
+ * symlink(2) is nothing of that sort, and the locking it
+ * gets matches the normal symlink(2) semantics. Without
+ * attempts to resolve the target (which might very well
+ * not even exist yet) done prior to locking the parent
+ * directory. This perversion, OTOH, needs to resolve
+ * the target, which would lead to obvious deadlocks if
+ * attempted with any directories locked.
+ *
+ * Unfortunately, that garbage is userland ABI and we should've
+ * said "no" back in 2005. Too late now, so we get to
+ * play very ugly games with locking.
+ *
+ * Try *ANYTHING* of that sort in new code, and you will
+ * really regret it. Just ask yourself - what could a BOFH
+ * do to me and do I want to find it out first-hand?
+ *
+ * AV, a thoroughly annoyed bastard.
+ */
+ inode_unlock(dir);
ret = get_target(symname, &path, &target_item, dentry->d_sb);
+ inode_lock(dir);
if (ret)
goto out_put;
- ret = type->ct_item_ops->allow_link(parent_item, target_item);
+ if (dentry->d_inode || d_unhashed(dentry))
+ ret = -EEXIST;
+ else
+ ret = inode_permission(dir, MAY_WRITE | MAY_EXEC);
+ if (!ret)
+ ret = type->ct_item_ops->allow_link(parent_item, target_item);
if (!ret) {
mutex_lock(&configfs_symlink_mutex);
ret = create_link(parent_item, target_item, dentry);
From: Himanshu Madhani <[email protected]>
[ Upstream commit c2ff2a36eff60efb5e123c940115216d6bf65684 ]
This patch fixes issue with Gen7 adapter in a blade environment where one
of the ports will not be detected by driver. Firmware expects mailbox 11 to
be set or cleared by driver for newer ISP.
Following message is seen in the log file:
[ 18.810892] qla2xxx [0000:d8:00.0]-1820:1: **** Failed=102 mb[0]=4005 mb[1]=37 mb[2]=20 mb[3]=8
[ 18.819596] cmd=2 ****
[mkp: typos]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_mbx.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index abfb9c800ce28..ac4640f456786 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -710,6 +710,7 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
mcp->mb[2] = LSW(risc_addr);
mcp->mb[3] = 0;
mcp->mb[4] = 0;
+ mcp->mb[11] = 0;
ha->flags.using_lr_setting = 0;
if (IS_QLA25XX(ha) || IS_QLA81XX(ha) || IS_QLA83XX(ha) ||
IS_QLA27XX(ha) || IS_QLA28XX(ha)) {
@@ -754,7 +755,7 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
if (ha->flags.exchoffld_enabled)
mcp->mb[4] |= ENABLE_EXCHANGE_OFFLD;
- mcp->out_mb |= MBX_4|MBX_3|MBX_2|MBX_1;
+ mcp->out_mb |= MBX_4 | MBX_3 | MBX_2 | MBX_1 | MBX_11;
mcp->in_mb |= MBX_3 | MBX_2 | MBX_1;
} else {
mcp->mb[1] = LSW(risc_addr);
--
2.20.1
From: Daniel Borkmann <[email protected]>
[ Upstream commit 3b4d9eb2ee74dd5ea7fa36cffb0ca7f5bc4924da ]
There is one more problematic case I noticed while recently fixing BPF kallsyms
handling in cd7455f1013e ("bpf: Fix use after free in subprog's jited symbol
removal") and that is bpf_get_prog_name().
If BTF has been attached to the prog, then we may be able to fetch the function
signature type id in kallsyms through prog->aux->func_info[prog->aux->func_idx].type_id.
However, while the BTF object itself is torn down via RCU callback, the prog's
aux->func_info is immediately freed via kvfree(prog->aux->func_info) once the
prog's refcount either hit zero or when subprograms were already exposed via
kallsyms and we hit the error path added in 5482e9a93c83 ("bpf: Fix memleak in
aux->func_info and aux->btf").
This violates RCU as well since kallsyms could be walked in parallel where we
could access aux->func_info. Hence, defer kvfree() to after RCU grace period.
Looking at ba64e7d85252 ("bpf: btf: support proper non-jit func info") there
is no reason/dependency where we couldn't defer the kvfree(aux->func_info) into
the RCU callback.
Fixes: 5482e9a93c83 ("bpf: Fix memleak in aux->func_info and aux->btf")
Fixes: ba64e7d85252 ("bpf: btf: support proper non-jit func info")
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Link: https://lore.kernel.org/bpf/875f2906a7c1a0691f2d567b4d8e4ea2739b1e88.1571779205.git.daniel@iogearbox.net
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/syscall.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index af5c60b07463e..aac966b32c42e 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -1316,6 +1316,7 @@ static void __bpf_prog_put_rcu(struct rcu_head *rcu)
{
struct bpf_prog_aux *aux = container_of(rcu, struct bpf_prog_aux, rcu);
+ kvfree(aux->func_info);
free_used_maps(aux);
bpf_prog_uncharge_memlock(aux->prog);
security_bpf_prog_free(aux);
@@ -1326,7 +1327,6 @@ static void __bpf_prog_put_noref(struct bpf_prog *prog, bool deferred)
{
bpf_prog_kallsyms_del_all(prog);
btf_put(prog->aux->btf);
- kvfree(prog->aux->func_info);
bpf_prog_free_linfo(prog);
if (deferred)
--
2.20.1
From: Takashi Iwai <[email protected]>
commit 52c3e317a857091fd746e15179a637f32be4d337 upstream.
Instead of the direct kfree() calls, introduce a new local helper to
release the usb_mixer_elem_info object. This will be extended to do
more than a single kfree() in the later patches.
Also, use the standard goto instead of multiple calls in
parse_audio_selector_unit() error paths.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/mixer.c | 48 ++++++++++++++++++++++++++++--------------------
1 file changed, 28 insertions(+), 20 deletions(-)
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -1026,10 +1026,15 @@ static struct usb_feature_control_info a
{ UAC2_FU_PHASE_INVERTER, "Phase Inverter Control", USB_MIXER_BOOLEAN, -1 },
};
+static void usb_mixer_elem_info_free(struct usb_mixer_elem_info *cval)
+{
+ kfree(cval);
+}
+
/* private_free callback */
void snd_usb_mixer_elem_free(struct snd_kcontrol *kctl)
{
- kfree(kctl->private_data);
+ usb_mixer_elem_info_free(kctl->private_data);
kctl->private_data = NULL;
}
@@ -1552,7 +1557,7 @@ static void __build_feature_ctl(struct u
ctl_info = get_feature_control_info(control);
if (!ctl_info) {
- kfree(cval);
+ usb_mixer_elem_info_free(cval);
return;
}
if (mixer->protocol == UAC_VERSION_1)
@@ -1585,7 +1590,7 @@ static void __build_feature_ctl(struct u
if (!kctl) {
usb_audio_err(mixer->chip, "cannot malloc kcontrol\n");
- kfree(cval);
+ usb_mixer_elem_info_free(cval);
return;
}
kctl->private_free = snd_usb_mixer_elem_free;
@@ -1755,7 +1760,7 @@ static void build_connector_control(stru
kctl = snd_ctl_new1(&usb_connector_ctl_ro, cval);
if (!kctl) {
usb_audio_err(mixer->chip, "cannot malloc kcontrol\n");
- kfree(cval);
+ usb_mixer_elem_info_free(cval);
return;
}
get_connector_control_name(mixer, term, is_input, kctl->id.name,
@@ -1808,7 +1813,7 @@ static int parse_clock_source_unit(struc
kctl = snd_ctl_new1(&usb_bool_master_control_ctl_ro, cval);
if (!kctl) {
- kfree(cval);
+ usb_mixer_elem_info_free(cval);
return -ENOMEM;
}
@@ -2070,7 +2075,7 @@ static void build_mixer_unit_ctl(struct
kctl = snd_ctl_new1(&usb_feature_unit_ctl, cval);
if (!kctl) {
usb_audio_err(state->chip, "cannot malloc kcontrol\n");
- kfree(cval);
+ usb_mixer_elem_info_free(cval);
return;
}
kctl->private_free = snd_usb_mixer_elem_free;
@@ -2468,7 +2473,7 @@ static int build_audio_procunit(struct m
kctl = snd_ctl_new1(&mixer_procunit_ctl, cval);
if (!kctl) {
- kfree(cval);
+ usb_mixer_elem_info_free(cval);
return -ENOMEM;
}
kctl->private_free = snd_usb_mixer_elem_free;
@@ -2606,7 +2611,7 @@ static void usb_mixer_selector_elem_free
if (kctl->private_data) {
struct usb_mixer_elem_info *cval = kctl->private_data;
num_ins = cval->max;
- kfree(cval);
+ usb_mixer_elem_info_free(cval);
kctl->private_data = NULL;
}
if (kctl->private_value) {
@@ -2678,10 +2683,10 @@ static int parse_audio_selector_unit(str
break;
}
- namelist = kmalloc_array(desc->bNrInPins, sizeof(char *), GFP_KERNEL);
+ namelist = kcalloc(desc->bNrInPins, sizeof(char *), GFP_KERNEL);
if (!namelist) {
- kfree(cval);
- return -ENOMEM;
+ err = -ENOMEM;
+ goto error_cval;
}
#define MAX_ITEM_NAME_LEN 64
for (i = 0; i < desc->bNrInPins; i++) {
@@ -2689,11 +2694,8 @@ static int parse_audio_selector_unit(str
len = 0;
namelist[i] = kmalloc(MAX_ITEM_NAME_LEN, GFP_KERNEL);
if (!namelist[i]) {
- while (i--)
- kfree(namelist[i]);
- kfree(namelist);
- kfree(cval);
- return -ENOMEM;
+ err = -ENOMEM;
+ goto error_name;
}
len = check_mapped_selector_name(state, unitid, i, namelist[i],
MAX_ITEM_NAME_LEN);
@@ -2707,10 +2709,8 @@ static int parse_audio_selector_unit(str
kctl = snd_ctl_new1(&mixer_selectunit_ctl, cval);
if (! kctl) {
usb_audio_err(state->chip, "cannot malloc kcontrol\n");
- for (i = 0; i < desc->bNrInPins; i++)
- kfree(namelist[i]);
- kfree(namelist);
- kfree(cval);
+ err = -ENOMEM;
+ goto error_name;
return -ENOMEM;
}
kctl->private_value = (unsigned long)namelist;
@@ -2757,6 +2757,14 @@ static int parse_audio_selector_unit(str
usb_audio_dbg(state->chip, "[%d] SU [%s] items = %d\n",
cval->head.id, kctl->id.name, desc->bNrInPins);
return snd_usb_mixer_add_control(&cval->head, kctl);
+
+ error_name:
+ for (i = 0; i < desc->bNrInPins; i++)
+ kfree(namelist[i]);
+ kfree(namelist);
+ error_cval:
+ usb_mixer_elem_info_free(cval);
+ return err;
}
/*
From: Alexander Shishkin <[email protected]>
commit 3adbb5718dd5264666ddbc2b9b43799d292e9cb6 upstream.
This adds support for Intel TH on Comet Lake PCH.
Signed-off-by: Alexander Shishkin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwtracing/intel_th/pci.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/hwtracing/intel_th/pci.c
+++ b/drivers/hwtracing/intel_th/pci.c
@@ -200,6 +200,11 @@ static const struct pci_device_id intel_
.driver_data = (kernel_ulong_t)&intel_th_2x,
},
{
+ /* Comet Lake PCH */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x06a6),
+ .driver_data = (kernel_ulong_t)&intel_th_2x,
+ },
+ {
/* Ice Lake NNPI */
PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x45c5),
.driver_data = (kernel_ulong_t)&intel_th_2x,
From: Luca Coelho <[email protected]>
[ Upstream commit 6dea7da7019aa04c02edf1878c9c2e59d6cb75a5 ]
Some entries for PCI ID 0x2720 were using iwl9260_2ac_cfg, but the
correct is to use iwl9260_2ac_cfg_soc. Fix that.
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
index acbadfdbdd3fe..cef29de053932 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
@@ -618,9 +618,9 @@ static const struct pci_device_id iwl_hw_card_ids[] = {
{IWL_PCI_DEVICE(0x271B, 0x0210, iwl9160_2ac_cfg)},
{IWL_PCI_DEVICE(0x271B, 0x0214, iwl9260_2ac_cfg)},
{IWL_PCI_DEVICE(0x271C, 0x0214, iwl9260_2ac_cfg)},
- {IWL_PCI_DEVICE(0x2720, 0x0034, iwl9560_2ac_160_cfg)},
- {IWL_PCI_DEVICE(0x2720, 0x0038, iwl9560_2ac_160_cfg)},
- {IWL_PCI_DEVICE(0x2720, 0x003C, iwl9560_2ac_160_cfg)},
+ {IWL_PCI_DEVICE(0x2720, 0x0034, iwl9560_2ac_160_cfg_soc)},
+ {IWL_PCI_DEVICE(0x2720, 0x0038, iwl9560_2ac_160_cfg_soc)},
+ {IWL_PCI_DEVICE(0x2720, 0x003C, iwl9560_2ac_160_cfg_soc)},
{IWL_PCI_DEVICE(0x2720, 0x0060, iwl9461_2ac_cfg_soc)},
{IWL_PCI_DEVICE(0x2720, 0x0064, iwl9461_2ac_cfg_soc)},
{IWL_PCI_DEVICE(0x2720, 0x00A0, iwl9462_2ac_cfg_soc)},
@@ -640,7 +640,7 @@ static const struct pci_device_id iwl_hw_card_ids[] = {
{IWL_PCI_DEVICE(0x2720, 0x1552, iwl9560_killer_2ac_cfg_soc)},
{IWL_PCI_DEVICE(0x2720, 0x2030, iwl9560_2ac_160_cfg_soc)},
{IWL_PCI_DEVICE(0x2720, 0x2034, iwl9560_2ac_160_cfg_soc)},
- {IWL_PCI_DEVICE(0x2720, 0x4030, iwl9560_2ac_160_cfg)},
+ {IWL_PCI_DEVICE(0x2720, 0x4030, iwl9560_2ac_160_cfg_soc)},
{IWL_PCI_DEVICE(0x2720, 0x4034, iwl9560_2ac_160_cfg_soc)},
{IWL_PCI_DEVICE(0x2720, 0x40A4, iwl9462_2ac_cfg_soc)},
{IWL_PCI_DEVICE(0x2720, 0x4234, iwl9560_2ac_cfg_soc)},
--
2.20.1
From: Takashi Iwai <[email protected]>
commit b8e4f1fdfa422398c2d6c47bfb7d1feb3046d70a upstream.
Now that we got the more comprehensive validation code for USB-audio
descriptors, the check of overflow in each descriptor unit parser
became superfluous. Drop some of the obvious cases.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/clock.c | 14 +++------
sound/usb/mixer.c | 84 ------------------------------------------------------
2 files changed, 6 insertions(+), 92 deletions(-)
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -38,39 +38,37 @@ static void *find_uac_clock_desc(struct
static bool validate_clock_source_v2(void *p, int id)
{
struct uac_clock_source_descriptor *cs = p;
- return cs->bLength == sizeof(*cs) && cs->bClockID == id;
+ return cs->bClockID == id;
}
static bool validate_clock_source_v3(void *p, int id)
{
struct uac3_clock_source_descriptor *cs = p;
- return cs->bLength == sizeof(*cs) && cs->bClockID == id;
+ return cs->bClockID == id;
}
static bool validate_clock_selector_v2(void *p, int id)
{
struct uac_clock_selector_descriptor *cs = p;
- return cs->bLength >= sizeof(*cs) && cs->bClockID == id &&
- cs->bLength == 7 + cs->bNrInPins;
+ return cs->bClockID == id;
}
static bool validate_clock_selector_v3(void *p, int id)
{
struct uac3_clock_selector_descriptor *cs = p;
- return cs->bLength >= sizeof(*cs) && cs->bClockID == id &&
- cs->bLength == 11 + cs->bNrInPins;
+ return cs->bClockID == id;
}
static bool validate_clock_multiplier_v2(void *p, int id)
{
struct uac_clock_multiplier_descriptor *cs = p;
- return cs->bLength == sizeof(*cs) && cs->bClockID == id;
+ return cs->bClockID == id;
}
static bool validate_clock_multiplier_v3(void *p, int id)
{
struct uac3_clock_multiplier_descriptor *cs = p;
- return cs->bLength == sizeof(*cs) && cs->bClockID == id;
+ return cs->bClockID == id;
}
#define DEFINE_FIND_HELPER(name, obj, validator, type) \
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -740,13 +740,6 @@ static int uac_mixer_unit_get_channels(s
{
int mu_channels;
- if (desc->bLength < sizeof(*desc))
- return -EINVAL;
- if (!desc->bNrInPins)
- return -EINVAL;
- if (desc->bLength < sizeof(*desc) + desc->bNrInPins)
- return -EINVAL;
-
switch (state->mixer->protocol) {
case UAC_VERSION_1:
case UAC_VERSION_2:
@@ -1781,13 +1774,6 @@ static int parse_clock_source_unit(struc
if (state->mixer->protocol != UAC_VERSION_2)
return -EINVAL;
- if (hdr->bLength != sizeof(*hdr)) {
- usb_audio_dbg(state->chip,
- "Bogus clock source descriptor length of %d, ignoring.\n",
- hdr->bLength);
- return 0;
- }
-
/*
* The only property of this unit we are interested in is the
* clock source validity. If that isn't readable, just bail out.
@@ -1846,62 +1832,20 @@ static int parse_audio_feature_unit(stru
__u8 *bmaControls;
if (state->mixer->protocol == UAC_VERSION_1) {
- if (hdr->bLength < 7) {
- usb_audio_err(state->chip,
- "unit %u: invalid UAC_FEATURE_UNIT descriptor\n",
- unitid);
- return -EINVAL;
- }
csize = hdr->bControlSize;
- if (!csize) {
- usb_audio_dbg(state->chip,
- "unit %u: invalid bControlSize == 0\n",
- unitid);
- return -EINVAL;
- }
channels = (hdr->bLength - 7) / csize - 1;
bmaControls = hdr->bmaControls;
- if (hdr->bLength < 7 + csize) {
- usb_audio_err(state->chip,
- "unit %u: invalid UAC_FEATURE_UNIT descriptor\n",
- unitid);
- return -EINVAL;
- }
} else if (state->mixer->protocol == UAC_VERSION_2) {
struct uac2_feature_unit_descriptor *ftr = _ftr;
- if (hdr->bLength < 6) {
- usb_audio_err(state->chip,
- "unit %u: invalid UAC_FEATURE_UNIT descriptor\n",
- unitid);
- return -EINVAL;
- }
csize = 4;
channels = (hdr->bLength - 6) / 4 - 1;
bmaControls = ftr->bmaControls;
- if (hdr->bLength < 6 + csize) {
- usb_audio_err(state->chip,
- "unit %u: invalid UAC_FEATURE_UNIT descriptor\n",
- unitid);
- return -EINVAL;
- }
} else { /* UAC_VERSION_3 */
struct uac3_feature_unit_descriptor *ftr = _ftr;
- if (hdr->bLength < 7) {
- usb_audio_err(state->chip,
- "unit %u: invalid UAC3_FEATURE_UNIT descriptor\n",
- unitid);
- return -EINVAL;
- }
csize = 4;
channels = (ftr->bLength - 7) / 4 - 1;
bmaControls = ftr->bmaControls;
- if (hdr->bLength < 7 + csize) {
- usb_audio_err(state->chip,
- "unit %u: invalid UAC3_FEATURE_UNIT descriptor\n",
- unitid);
- return -EINVAL;
- }
}
/* parse the source unit */
@@ -2101,15 +2045,11 @@ static int parse_audio_input_terminal(st
if (state->mixer->protocol == UAC_VERSION_2) {
struct uac2_input_terminal_descriptor *d_v2 = raw_desc;
- if (d_v2->bLength < sizeof(*d_v2))
- return -EINVAL;
control = UAC2_TE_CONNECTOR;
term_id = d_v2->bTerminalID;
bmctls = le16_to_cpu(d_v2->bmControls);
} else if (state->mixer->protocol == UAC_VERSION_3) {
struct uac3_input_terminal_descriptor *d_v3 = raw_desc;
- if (d_v3->bLength < sizeof(*d_v3))
- return -EINVAL;
control = UAC3_TE_INSERTION;
term_id = d_v3->bTerminalID;
bmctls = le32_to_cpu(d_v3->bmControls);
@@ -2371,18 +2311,7 @@ static int build_audio_procunit(struct m
const char *name = extension_unit ?
"Extension Unit" : "Processing Unit";
- if (desc->bLength < 13) {
- usb_audio_err(state->chip, "invalid %s descriptor (id %d)\n", name, unitid);
- return -EINVAL;
- }
-
num_ins = desc->bNrInPins;
- if (desc->bLength < 13 + num_ins ||
- desc->bLength < num_ins + uac_processing_unit_bControlSize(desc, state->mixer->protocol)) {
- usb_audio_err(state->chip, "invalid %s descriptor (id %d)\n", name, unitid);
- return -EINVAL;
- }
-
for (i = 0; i < num_ins; i++) {
err = parse_audio_unit(state, desc->baSourceID[i]);
if (err < 0)
@@ -2637,13 +2566,6 @@ static int parse_audio_selector_unit(str
const struct usbmix_name_map *map;
char **namelist;
- if (desc->bLength < 5 || !desc->bNrInPins ||
- desc->bLength < 5 + desc->bNrInPins) {
- usb_audio_err(state->chip,
- "invalid SELECTOR UNIT descriptor %d\n", unitid);
- return -EINVAL;
- }
-
for (i = 0; i < desc->bNrInPins; i++) {
err = parse_audio_unit(state, desc->baSourceID[i]);
if (err < 0)
@@ -3149,8 +3071,6 @@ static int snd_usb_mixer_controls(struct
if (mixer->protocol == UAC_VERSION_1) {
struct uac1_output_terminal_descriptor *desc = p;
- if (desc->bLength < sizeof(*desc))
- continue; /* invalid descriptor? */
/* mark terminal ID as visited */
set_bit(desc->bTerminalID, state.unitbitmap);
state.oterm.id = desc->bTerminalID;
@@ -3162,8 +3082,6 @@ static int snd_usb_mixer_controls(struct
} else if (mixer->protocol == UAC_VERSION_2) {
struct uac2_output_terminal_descriptor *desc = p;
- if (desc->bLength < sizeof(*desc))
- continue; /* invalid descriptor? */
/* mark terminal ID as visited */
set_bit(desc->bTerminalID, state.unitbitmap);
state.oterm.id = desc->bTerminalID;
@@ -3189,8 +3107,6 @@ static int snd_usb_mixer_controls(struct
} else { /* UAC_VERSION_3 */
struct uac3_output_terminal_descriptor *desc = p;
- if (desc->bLength < sizeof(*desc))
- continue; /* invalid descriptor? */
/* mark terminal ID as visited */
set_bit(desc->bTerminalID, state.unitbitmap);
state.oterm.id = desc->bTerminalID;
From: Luca Coelho <[email protected]>
[ Upstream commit e55890150a961944e861a46efc8599f80f25de76 ]
A bunch of the entries for qnj were wrong. The 9460 device doesn't
exist, so update them to 9461 and 9462. There are still a bunch of
other occurrences of 9460, but that will be fixed separately.
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
index cef29de053932..3645c98c407e1 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
@@ -573,20 +573,20 @@ static const struct pci_device_id iwl_hw_card_ids[] = {
{IWL_PCI_DEVICE(0x2526, 0x0034, iwl9560_2ac_cfg)},
{IWL_PCI_DEVICE(0x2526, 0x0038, iwl9560_2ac_160_cfg)},
{IWL_PCI_DEVICE(0x2526, 0x003C, iwl9560_2ac_160_cfg)},
- {IWL_PCI_DEVICE(0x2526, 0x0060, iwl9460_2ac_cfg)},
- {IWL_PCI_DEVICE(0x2526, 0x0064, iwl9460_2ac_cfg)},
- {IWL_PCI_DEVICE(0x2526, 0x00A0, iwl9460_2ac_cfg)},
- {IWL_PCI_DEVICE(0x2526, 0x00A4, iwl9460_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x2526, 0x0060, iwl9461_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x2526, 0x0064, iwl9461_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x2526, 0x00A0, iwl9462_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x2526, 0x00A4, iwl9462_2ac_cfg_soc)},
{IWL_PCI_DEVICE(0x2526, 0x0210, iwl9260_2ac_cfg)},
{IWL_PCI_DEVICE(0x2526, 0x0214, iwl9260_2ac_cfg)},
{IWL_PCI_DEVICE(0x2526, 0x0230, iwl9560_2ac_cfg)},
{IWL_PCI_DEVICE(0x2526, 0x0234, iwl9560_2ac_cfg)},
{IWL_PCI_DEVICE(0x2526, 0x0238, iwl9560_2ac_cfg)},
{IWL_PCI_DEVICE(0x2526, 0x023C, iwl9560_2ac_cfg)},
- {IWL_PCI_DEVICE(0x2526, 0x0260, iwl9460_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x2526, 0x0260, iwl9461_2ac_cfg_soc)},
{IWL_PCI_DEVICE(0x2526, 0x0264, iwl9461_2ac_cfg_soc)},
- {IWL_PCI_DEVICE(0x2526, 0x02A0, iwl9460_2ac_cfg)},
- {IWL_PCI_DEVICE(0x2526, 0x02A4, iwl9460_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x2526, 0x02A0, iwl9462_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x2526, 0x02A4, iwl9462_2ac_cfg_soc)},
{IWL_PCI_DEVICE(0x2526, 0x1010, iwl9260_2ac_cfg)},
{IWL_PCI_DEVICE(0x2526, 0x1030, iwl9560_2ac_cfg)},
{IWL_PCI_DEVICE(0x2526, 0x1210, iwl9260_2ac_cfg)},
@@ -603,7 +603,7 @@ static const struct pci_device_id iwl_hw_card_ids[] = {
{IWL_PCI_DEVICE(0x2526, 0x401C, iwl9260_2ac_160_cfg)},
{IWL_PCI_DEVICE(0x2526, 0x4030, iwl9560_2ac_160_cfg)},
{IWL_PCI_DEVICE(0x2526, 0x4034, iwl9560_2ac_160_cfg_soc)},
- {IWL_PCI_DEVICE(0x2526, 0x40A4, iwl9460_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x2526, 0x40A4, iwl9462_2ac_cfg_soc)},
{IWL_PCI_DEVICE(0x2526, 0x4234, iwl9560_2ac_cfg_soc)},
{IWL_PCI_DEVICE(0x2526, 0x42A4, iwl9462_2ac_cfg_soc)},
{IWL_PCI_DEVICE(0x2526, 0x6010, iwl9260_2ac_160_cfg)},
--
2.20.1
From: Pablo Neira Ayuso <[email protected]>
[ Upstream commit daf61b026f4686250e6afa619e6d7b49edc61df7 ]
Other garbage collector might remove an entry not fully set up yet.
[570953.958293] RIP: 0010:memcmp+0x9/0x50
[...]
[570953.958567] flow_offload_hash_cmp+0x1e/0x30 [nf_flow_table]
[570953.958585] flow_offload_lookup+0x8c/0x110 [nf_flow_table]
[570953.958606] nf_flow_offload_ip_hook+0x135/0xb30 [nf_flow_table]
[570953.958624] nf_flow_offload_inet_hook+0x35/0x37 [nf_flow_table_inet]
[570953.958646] nf_hook_slow+0x3c/0xb0
[570953.958664] __netif_receive_skb_core+0x90f/0xb10
[570953.958678] ? ip_rcv_finish+0x82/0xa0
[570953.958692] __netif_receive_skb_one_core+0x3b/0x80
[570953.958711] __netif_receive_skb+0x18/0x60
[570953.958727] netif_receive_skb_internal+0x45/0xf0
[570953.958741] napi_gro_receive+0xcd/0xf0
[570953.958764] ixgbe_clean_rx_irq+0x432/0xe00 [ixgbe]
[570953.958782] ixgbe_poll+0x27b/0x700 [ixgbe]
[570953.958796] net_rx_action+0x284/0x3c0
[570953.958817] __do_softirq+0xcc/0x27c
[570953.959464] irq_exit+0xe8/0x100
[570953.960097] do_IRQ+0x59/0xe0
[570953.960734] common_interrupt+0xf/0xf
Fixes: 43c8f131184f ("netfilter: nf_flow_table: fix missing error check for rhashtable_insert_fast")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nf_flow_table_core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/netfilter/nf_flow_table_core.c b/net/netfilter/nf_flow_table_core.c
index a0b4bf654de2d..4c2f8959de587 100644
--- a/net/netfilter/nf_flow_table_core.c
+++ b/net/netfilter/nf_flow_table_core.c
@@ -201,6 +201,8 @@ int flow_offload_add(struct nf_flowtable *flow_table, struct flow_offload *flow)
{
int err;
+ flow->timeout = (u32)jiffies + NF_FLOW_TIMEOUT;
+
err = rhashtable_insert_fast(&flow_table->rhashtable,
&flow->tuplehash[0].node,
nf_flow_offload_rhash_params);
@@ -217,7 +219,6 @@ int flow_offload_add(struct nf_flowtable *flow_table, struct flow_offload *flow)
return err;
}
- flow->timeout = (u32)jiffies + NF_FLOW_TIMEOUT;
return 0;
}
EXPORT_SYMBOL_GPL(flow_offload_add);
--
2.20.1
From: Navid Emamdoost <[email protected]>
[ Upstream commit 29cd13cfd7624726d9e6becbae9aa419ef35af7f ]
In the impelementation of v3d_submit_cl_ioctl() there are two memory
leaks. One is when allocation for bin fails, and the other is when bin
initialization fails. If kcalloc fails to allocate memory for bin then
render->base should be put. Also, if v3d_job_init() fails to initialize
bin->base then allocated memory for bin should be released.
Fixes: a783a09ee76d ("drm/v3d: Refactor job management.")
Signed-off-by: Navid Emamdoost <[email protected]>
Reviewed-by: Eric Anholt <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/v3d/v3d_gem.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/v3d/v3d_gem.c b/drivers/gpu/drm/v3d/v3d_gem.c
index 27e0f87075d96..4dc7e38c99c7c 100644
--- a/drivers/gpu/drm/v3d/v3d_gem.c
+++ b/drivers/gpu/drm/v3d/v3d_gem.c
@@ -555,13 +555,16 @@ v3d_submit_cl_ioctl(struct drm_device *dev, void *data,
if (args->bcl_start != args->bcl_end) {
bin = kcalloc(1, sizeof(*bin), GFP_KERNEL);
- if (!bin)
+ if (!bin) {
+ v3d_job_put(&render->base);
return -ENOMEM;
+ }
ret = v3d_job_init(v3d, file_priv, &bin->base,
v3d_job_free, args->in_sync_bcl);
if (ret) {
v3d_job_put(&render->base);
+ kfree(bin);
return ret;
}
--
2.20.1
From: Takashi Iwai <[email protected]>
commit 60849562a5db4a1eee2160167e4dce4590d3eafe upstream.
The previous addition of descriptor validation may lead to a NULL
dereference at create_yamaha_midi_quirk() when either injd or outjd is
NULL. Add proper non-NULL checks.
Fixes: 57f8770620e9 ("ALSA: usb-audio: More validations of descriptor units")
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/quirks.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -248,8 +248,8 @@ static int create_yamaha_midi_quirk(stru
NULL, USB_MS_MIDI_OUT_JACK);
if (!injd && !outjd)
return -ENODEV;
- if (!snd_usb_validate_midi_desc(injd) ||
- !snd_usb_validate_midi_desc(outjd))
+ if (!(injd && snd_usb_validate_midi_desc(injd)) ||
+ !(outjd && snd_usb_validate_midi_desc(outjd)))
return -ENODEV;
if (injd && (injd->bLength < 5 ||
(injd->bJackType != USB_MS_EMBEDDED &&
From: Martin Fuzzey <[email protected]>
[ Upstream commit 76db2d466f6a929a04775f0f87d837e3bcba44e8 ]
The LAN8740, like the 8720, also requires a reset after enabling clock.
The datasheet [1] 3.8.5.1 says:
"During a Hardware reset, an external clock must be supplied
to the XTAL1/CLKIN signal."
I have observed this issue on a custom i.MX6 based board with
the LAN8740A.
[1] http://ww1.microchip.com/downloads/en/DeviceDoc/8740a.pdf
Signed-off-by: Martin Fuzzey <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/phy/smsc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index dc3d92d340c4d..b732982507939 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -327,6 +327,7 @@ static struct phy_driver smsc_phy_driver[] = {
.name = "SMSC LAN8740",
/* PHY_BASIC_FEATURES */
+ .flags = PHY_RST_AFTER_CLK_EN,
.probe = smsc_phy_probe,
--
2.20.1
From: Dan Carpenter <[email protected]>
commit b39e077fcb283dd96dd251a3abeba585402c61fe upstream.
We recently cleaned up the error handling in commit 52c3e317a857 ("ALSA:
usb-audio: Unify the release of usb_mixer_elem_info objects") but
accidentally left this stray return.
Fixes: 52c3e317a857 ("ALSA: usb-audio: Unify the release of usb_mixer_elem_info objects")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/mixer.c | 1 -
1 file changed, 1 deletion(-)
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -2651,7 +2651,6 @@ static int parse_audio_selector_unit(str
usb_audio_err(state->chip, "cannot malloc kcontrol\n");
err = -ENOMEM;
goto error_name;
- return -ENOMEM;
}
kctl->private_value = (unsigned long)namelist;
kctl->private_free = usb_mixer_selector_elem_free;
From: Hannes Reinecke <[email protected]>
[ Upstream commit 66cf50e65b183c863825f5c28a818e3f47a72e40 ]
DRIVER_ERROR is a a driver byte setting, not a host byte. The qla2xxx
driver should rather return DID_ERROR here to be in line with the other
drivers.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hannes Reinecke <[email protected]>
Acked-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_bsg.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index 5441557b424b3..3084c2cff7bd5 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -257,7 +257,7 @@ qla2x00_process_els(struct bsg_job *bsg_job)
srb_t *sp;
const char *type;
int req_sg_cnt, rsp_sg_cnt;
- int rval = (DRIVER_ERROR << 16);
+ int rval = (DID_ERROR << 16);
uint16_t nextlid = 0;
if (bsg_request->msgcode == FC_BSG_RPT_ELS) {
@@ -432,7 +432,7 @@ qla2x00_process_ct(struct bsg_job *bsg_job)
struct Scsi_Host *host = fc_bsg_to_shost(bsg_job);
scsi_qla_host_t *vha = shost_priv(host);
struct qla_hw_data *ha = vha->hw;
- int rval = (DRIVER_ERROR << 16);
+ int rval = (DID_ERROR << 16);
int req_sg_cnt, rsp_sg_cnt;
uint16_t loop_id;
struct fc_port *fcport;
@@ -1951,7 +1951,7 @@ qlafx00_mgmt_cmd(struct bsg_job *bsg_job)
struct Scsi_Host *host = fc_bsg_to_shost(bsg_job);
scsi_qla_host_t *vha = shost_priv(host);
struct qla_hw_data *ha = vha->hw;
- int rval = (DRIVER_ERROR << 16);
+ int rval = (DID_ERROR << 16);
struct qla_mt_iocb_rqst_fx00 *piocb_rqst;
srb_t *sp;
int req_sg_cnt = 0, rsp_sg_cnt = 0;
--
2.20.1
From: Davide Caratti <[email protected]>
[ Upstream commit 62931f59ce9cbabb934a431f48f2f1f441c605ac ]
if the IPVS module is removed while the sync daemon is starting, there is
a small gap where try_module_get() might fail getting the refcount inside
ip_vs_use_count_inc(). Then, the refcounts of IPVS module are unbalanced,
and the subsequent call to stop_sync_thread() causes the following splat:
WARNING: CPU: 0 PID: 4013 at kernel/module.c:1146 module_put.part.44+0x15b/0x290
Modules linked in: ip_vs(-) nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 veth ip6table_filter ip6_tables iptable_filter binfmt_misc intel_rapl_msr intel_rapl_common crct10dif_pclmul crc32_pclmul ext4 mbcache jbd2 ghash_clmulni_intel snd_hda_codec_generic ledtrig_audio snd_hda_intel snd_intel_nhlt snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper joydev pcspkr snd_timer virtio_balloon snd soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net net_failover virtio_blk failover virtio_console qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ata_piix ttm crc32c_intel serio_raw drm virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: nf_defrag_ipv6]
CPU: 0 PID: 4013 Comm: modprobe Tainted: G W 5.4.0-rc1.upstream+ #741
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:module_put.part.44+0x15b/0x290
Code: 04 25 28 00 00 00 0f 85 18 01 00 00 48 83 c4 68 5b 5d 41 5c 41 5d 41 5e 41 5f c3 89 44 24 28 83 e8 01 89 c5 0f 89 57 ff ff ff <0f> 0b e9 78 ff ff ff 65 8b 1d 67 83 26 4a 89 db be 08 00 00 00 48
RSP: 0018:ffff888050607c78 EFLAGS: 00010297
RAX: 0000000000000003 RBX: ffffffffc1420590 RCX: ffffffffb5db0ef9
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffc1420590
RBP: 00000000ffffffff R08: fffffbfff82840b3 R09: fffffbfff82840b3
R10: 0000000000000001 R11: fffffbfff82840b2 R12: 1ffff1100a0c0f90
R13: ffffffffc1420200 R14: ffff88804f533300 R15: ffff88804f533ca0
FS: 00007f8ea9720740(0000) GS:ffff888053800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3245abe000 CR3: 000000004c28a006 CR4: 00000000001606f0
Call Trace:
stop_sync_thread+0x3a3/0x7c0 [ip_vs]
ip_vs_sync_net_cleanup+0x13/0x50 [ip_vs]
ops_exit_list.isra.5+0x94/0x140
unregister_pernet_operations+0x29d/0x460
unregister_pernet_device+0x26/0x60
ip_vs_cleanup+0x11/0x38 [ip_vs]
__x64_sys_delete_module+0x2d5/0x400
do_syscall_64+0xa5/0x4e0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f8ea8bf0db7
Code: 73 01 c3 48 8b 0d b9 80 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 89 80 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffcd38d2fe8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
RAX: ffffffffffffffda RBX: 0000000002436240 RCX: 00007f8ea8bf0db7
RDX: 0000000000000000 RSI: 0000000000000800 RDI: 00000000024362a8
RBP: 0000000000000000 R08: 00007f8ea8eba060 R09: 00007f8ea8c658a0
R10: 00007ffcd38d2a60 R11: 0000000000000206 R12: 0000000000000000
R13: 0000000000000001 R14: 00000000024362a8 R15: 0000000000000000
irq event stamp: 4538
hardirqs last enabled at (4537): [<ffffffffb6193dde>] quarantine_put+0x9e/0x170
hardirqs last disabled at (4538): [<ffffffffb5a0556a>] trace_hardirqs_off_thunk+0x1a/0x20
softirqs last enabled at (4522): [<ffffffffb6f8ebe9>] sk_common_release+0x169/0x2d0
softirqs last disabled at (4520): [<ffffffffb6f8eb3e>] sk_common_release+0xbe/0x2d0
Check the return value of ip_vs_use_count_inc() and let its caller return
proper error. Inside do_ip_vs_set_ctl() the module is already refcounted,
we don't need refcount/derefcount there. Finally, in register_ip_vs_app()
and start_sync_thread(), take the module refcount earlier and ensure it's
released in the error path.
Change since v1:
- better return values in case of failure of ip_vs_use_count_inc(),
thanks to Julian Anastasov
- no need to increase/decrease the module refcount in ip_vs_set_ctl(),
thanks to Julian Anastasov
Signed-off-by: Davide Caratti <[email protected]>
Signed-off-by: Julian Anastasov <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/ipvs/ip_vs_app.c | 12 ++++++++++--
net/netfilter/ipvs/ip_vs_ctl.c | 14 ++++----------
net/netfilter/ipvs/ip_vs_pe.c | 3 ++-
net/netfilter/ipvs/ip_vs_sched.c | 3 ++-
net/netfilter/ipvs/ip_vs_sync.c | 13 ++++++++++---
5 files changed, 28 insertions(+), 17 deletions(-)
diff --git a/net/netfilter/ipvs/ip_vs_app.c b/net/netfilter/ipvs/ip_vs_app.c
index 4515056ef1c2b..f9b16f2b22191 100644
--- a/net/netfilter/ipvs/ip_vs_app.c
+++ b/net/netfilter/ipvs/ip_vs_app.c
@@ -193,21 +193,29 @@ struct ip_vs_app *register_ip_vs_app(struct netns_ipvs *ipvs, struct ip_vs_app *
mutex_lock(&__ip_vs_app_mutex);
+ /* increase the module use count */
+ if (!ip_vs_use_count_inc()) {
+ err = -ENOENT;
+ goto out_unlock;
+ }
+
list_for_each_entry(a, &ipvs->app_list, a_list) {
if (!strcmp(app->name, a->name)) {
err = -EEXIST;
+ /* decrease the module use count */
+ ip_vs_use_count_dec();
goto out_unlock;
}
}
a = kmemdup(app, sizeof(*app), GFP_KERNEL);
if (!a) {
err = -ENOMEM;
+ /* decrease the module use count */
+ ip_vs_use_count_dec();
goto out_unlock;
}
INIT_LIST_HEAD(&a->incs_list);
list_add(&a->a_list, &ipvs->app_list);
- /* increase the module use count */
- ip_vs_use_count_inc();
out_unlock:
mutex_unlock(&__ip_vs_app_mutex);
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 060565e7d227a..248c76290116e 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -1275,7 +1275,8 @@ ip_vs_add_service(struct netns_ipvs *ipvs, struct ip_vs_service_user_kern *u,
struct ip_vs_service *svc = NULL;
/* increase the module use count */
- ip_vs_use_count_inc();
+ if (!ip_vs_use_count_inc())
+ return -ENOPROTOOPT;
/* Lookup the scheduler by 'u->sched_name' */
if (strcmp(u->sched_name, "none")) {
@@ -2434,9 +2435,6 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
if (copy_from_user(arg, user, len) != 0)
return -EFAULT;
- /* increase the module use count */
- ip_vs_use_count_inc();
-
/* Handle daemons since they have another lock */
if (cmd == IP_VS_SO_SET_STARTDAEMON ||
cmd == IP_VS_SO_SET_STOPDAEMON) {
@@ -2449,13 +2447,13 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
ret = -EINVAL;
if (strscpy(cfg.mcast_ifn, dm->mcast_ifn,
sizeof(cfg.mcast_ifn)) <= 0)
- goto out_dec;
+ return ret;
cfg.syncid = dm->syncid;
ret = start_sync_thread(ipvs, &cfg, dm->state);
} else {
ret = stop_sync_thread(ipvs, dm->state);
}
- goto out_dec;
+ return ret;
}
mutex_lock(&__ip_vs_mutex);
@@ -2550,10 +2548,6 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
out_unlock:
mutex_unlock(&__ip_vs_mutex);
- out_dec:
- /* decrease the module use count */
- ip_vs_use_count_dec();
-
return ret;
}
diff --git a/net/netfilter/ipvs/ip_vs_pe.c b/net/netfilter/ipvs/ip_vs_pe.c
index 8e104dff7abc4..166c669f07634 100644
--- a/net/netfilter/ipvs/ip_vs_pe.c
+++ b/net/netfilter/ipvs/ip_vs_pe.c
@@ -68,7 +68,8 @@ int register_ip_vs_pe(struct ip_vs_pe *pe)
struct ip_vs_pe *tmp;
/* increase the module use count */
- ip_vs_use_count_inc();
+ if (!ip_vs_use_count_inc())
+ return -ENOENT;
mutex_lock(&ip_vs_pe_mutex);
/* Make sure that the pe with this name doesn't exist
diff --git a/net/netfilter/ipvs/ip_vs_sched.c b/net/netfilter/ipvs/ip_vs_sched.c
index 2f9d5cd5daeee..d4903723be7e9 100644
--- a/net/netfilter/ipvs/ip_vs_sched.c
+++ b/net/netfilter/ipvs/ip_vs_sched.c
@@ -179,7 +179,8 @@ int register_ip_vs_scheduler(struct ip_vs_scheduler *scheduler)
}
/* increase the module use count */
- ip_vs_use_count_inc();
+ if (!ip_vs_use_count_inc())
+ return -ENOENT;
mutex_lock(&ip_vs_sched_mutex);
diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c
index a4a78c4b06dec..8dc892a9dc91a 100644
--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -1762,6 +1762,10 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
IP_VS_DBG(7, "Each ip_vs_sync_conn entry needs %zd bytes\n",
sizeof(struct ip_vs_sync_conn_v0));
+ /* increase the module use count */
+ if (!ip_vs_use_count_inc())
+ return -ENOPROTOOPT;
+
/* Do not hold one mutex and then to block on another */
for (;;) {
rtnl_lock();
@@ -1892,9 +1896,6 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
mutex_unlock(&ipvs->sync_mutex);
rtnl_unlock();
- /* increase the module use count */
- ip_vs_use_count_inc();
-
return 0;
out:
@@ -1924,11 +1925,17 @@ out:
}
kfree(ti);
}
+
+ /* decrease the module use count */
+ ip_vs_use_count_dec();
return result;
out_early:
mutex_unlock(&ipvs->sync_mutex);
rtnl_unlock();
+
+ /* decrease the module use count */
+ ip_vs_use_count_dec();
return result;
}
--
2.20.1
From: Eric Dumazet <[email protected]>
[ Upstream commit c24b75e0f9239e78105f81c5f03a751641eb07ef ]
syzbot reported the following issue :
BUG: KCSAN: data-race in update_defense_level / update_defense_level
read to 0xffffffff861a6260 of 4 bytes by task 3006 on cpu 1:
update_defense_level+0x621/0xb30 net/netfilter/ipvs/ip_vs_ctl.c:177
defense_work_handler+0x3d/0xd0 net/netfilter/ipvs/ip_vs_ctl.c:225
process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
worker_thread+0xa0/0x800 kernel/workqueue.c:2415
kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352
write to 0xffffffff861a6260 of 4 bytes by task 7333 on cpu 0:
update_defense_level+0xa62/0xb30 net/netfilter/ipvs/ip_vs_ctl.c:205
defense_work_handler+0x3d/0xd0 net/netfilter/ipvs/ip_vs_ctl.c:225
process_one_work+0x3d4/0x890 kernel/workqueue.c:2269
worker_thread+0xa0/0x800 kernel/workqueue.c:2415
kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 7333 Comm: kworker/0:5 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events defense_work_handler
Indeed, old_secure_tcp is currently a static variable, while it
needs to be a per netns variable.
Fixes: a0840e2e165a ("IPVS: netns, ip_vs_ctl local vars moved to ipvs struct.")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/ip_vs.h | 1 +
net/netfilter/ipvs/ip_vs_ctl.c | 15 +++++++--------
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 3759167f91f56..078887c8c586a 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -889,6 +889,7 @@ struct netns_ipvs {
struct delayed_work defense_work; /* Work handler */
int drop_rate;
int drop_counter;
+ int old_secure_tcp;
atomic_t dropentry;
/* locks in ctl.c */
spinlock_t dropentry_lock; /* drop entry handling */
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 248c76290116e..e29b00f514a0a 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -93,7 +93,6 @@ static bool __ip_vs_addr_is_local_v6(struct net *net,
static void update_defense_level(struct netns_ipvs *ipvs)
{
struct sysinfo i;
- static int old_secure_tcp = 0;
int availmem;
int nomem;
int to_change = -1;
@@ -174,35 +173,35 @@ static void update_defense_level(struct netns_ipvs *ipvs)
spin_lock(&ipvs->securetcp_lock);
switch (ipvs->sysctl_secure_tcp) {
case 0:
- if (old_secure_tcp >= 2)
+ if (ipvs->old_secure_tcp >= 2)
to_change = 0;
break;
case 1:
if (nomem) {
- if (old_secure_tcp < 2)
+ if (ipvs->old_secure_tcp < 2)
to_change = 1;
ipvs->sysctl_secure_tcp = 2;
} else {
- if (old_secure_tcp >= 2)
+ if (ipvs->old_secure_tcp >= 2)
to_change = 0;
}
break;
case 2:
if (nomem) {
- if (old_secure_tcp < 2)
+ if (ipvs->old_secure_tcp < 2)
to_change = 1;
} else {
- if (old_secure_tcp >= 2)
+ if (ipvs->old_secure_tcp >= 2)
to_change = 0;
ipvs->sysctl_secure_tcp = 1;
}
break;
case 3:
- if (old_secure_tcp < 2)
+ if (ipvs->old_secure_tcp < 2)
to_change = 1;
break;
}
- old_secure_tcp = ipvs->sysctl_secure_tcp;
+ ipvs->old_secure_tcp = ipvs->sysctl_secure_tcp;
if (to_change >= 0)
ip_vs_protocol_timeout_change(ipvs,
ipvs->sysctl_secure_tcp > 1);
--
2.20.1
From: Radhey Shyam Pandey <[email protected]>
[ Upstream commit 68fe2b520cee829ed518b4b1f64d2a557bcbffe1 ]
In AXI DMA simple mode also pass MSB bits of source and destination
address to xilinx_write function. It fixes simple AXI DMA operation
mode using 64-bit addressing.
Signed-off-by: Radhey Shyam Pandey <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/xilinx/xilinx_dma.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index e7dc3c4dc8e07..1fbe0258578b0 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -1354,7 +1354,8 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
node);
hw = &segment->hw;
- xilinx_write(chan, XILINX_DMA_REG_SRCDSTADDR, hw->buf_addr);
+ xilinx_write(chan, XILINX_DMA_REG_SRCDSTADDR,
+ xilinx_prep_dma_addr_t(hw->buf_addr));
/* Start the transfer */
dma_ctrl_write(chan, XILINX_DMA_REG_BTT,
--
2.20.1
From: Taehee Yoo <[email protected]>
[ Upstream commit 65de65d9033750d2cf1b336c9d6e9da3a8b5cc6e ]
The IFF_BONDING means bonding master or bonding slave device.
->ndo_add_slave() sets IFF_BONDING flag and ->ndo_del_slave() unsets
IFF_BONDING flag.
bond0<--bond1
Both bond0 and bond1 are bonding device and these should keep having
IFF_BONDING flag until they are removed.
But bond1 would lose IFF_BONDING at ->ndo_del_slave() because that routine
do not check whether the slave device is the bonding type or not.
This patch adds the interface type check routine before removing
IFF_BONDING flag.
Test commands:
ip link add bond0 type bond
ip link add bond1 type bond
ip link set bond1 master bond0
ip link set bond1 nomaster
ip link del bond1 type bond
ip link add bond1 type bond
Splat looks like:
[ 226.665555] proc_dir_entry 'bonding/bond1' already registered
[ 226.666440] WARNING: CPU: 0 PID: 737 at fs/proc/generic.c:361 proc_register+0x2a9/0x3e0
[ 226.667571] Modules linked in: bonding af_packet sch_fq_codel ip_tables x_tables unix
[ 226.668662] CPU: 0 PID: 737 Comm: ip Not tainted 5.4.0-rc3+ #96
[ 226.669508] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 226.670652] RIP: 0010:proc_register+0x2a9/0x3e0
[ 226.671612] Code: 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 39 01 00 00 48 8b 04 24 48 89 ea 48 c7 c7 a0 0b 14 9f 48 8b b0 e
0 00 00 00 e8 07 e7 88 ff <0f> 0b 48 c7 c7 40 2d a5 9f e8 59 d6 23 01 48 8b 4c 24 10 48 b8 00
[ 226.675007] RSP: 0018:ffff888050e17078 EFLAGS: 00010282
[ 226.675761] RAX: dffffc0000000008 RBX: ffff88805fdd0f10 RCX: ffffffff9dd344e2
[ 226.676757] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88806c9f6b8c
[ 226.677751] RBP: ffff8880507160f3 R08: ffffed100d940019 R09: ffffed100d940019
[ 226.678761] R10: 0000000000000001 R11: ffffed100d940018 R12: ffff888050716008
[ 226.679757] R13: ffff8880507160f2 R14: dffffc0000000000 R15: ffffed100a0e2c1e
[ 226.680758] FS: 00007fdc217cc0c0(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000
[ 226.681886] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 226.682719] CR2: 00007f49313424d0 CR3: 0000000050e46001 CR4: 00000000000606f0
[ 226.683727] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 226.684725] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 226.685681] Call Trace:
[ 226.687089] proc_create_seq_private+0xb3/0xf0
[ 226.687778] bond_create_proc_entry+0x1b3/0x3f0 [bonding]
[ 226.691458] bond_netdev_event+0x433/0x970 [bonding]
[ 226.692139] ? __module_text_address+0x13/0x140
[ 226.692779] notifier_call_chain+0x90/0x160
[ 226.693401] register_netdevice+0x9b3/0xd80
[ 226.694010] ? alloc_netdev_mqs+0x854/0xc10
[ 226.694629] ? netdev_change_features+0xa0/0xa0
[ 226.695278] ? rtnl_create_link+0x2ed/0xad0
[ 226.695849] bond_newlink+0x2a/0x60 [bonding]
[ 226.696422] __rtnl_newlink+0xb9f/0x11b0
[ 226.696968] ? rtnl_link_unregister+0x220/0x220
[ ... ]
Fixes: 0b680e753724 ("[PATCH] bonding: Add priv_flag to avoid event mishandling")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/bonding/bond_main.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 4edb69b1d1260..142c5126da759 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1816,7 +1816,8 @@ err_detach:
slave_disable_netpoll(new_slave);
err_close:
- slave_dev->priv_flags &= ~IFF_BONDING;
+ if (!netif_is_bond_master(slave_dev))
+ slave_dev->priv_flags &= ~IFF_BONDING;
dev_close(slave_dev);
err_restore_mac:
@@ -2017,7 +2018,8 @@ static int __bond_release_one(struct net_device *bond_dev,
else
dev_set_mtu(slave_dev, slave->original_mtu);
- slave_dev->priv_flags &= ~IFF_BONDING;
+ if (!netif_is_bond_master(slave_dev))
+ slave_dev->priv_flags &= ~IFF_BONDING;
bond_free_slave(slave);
--
2.20.1
From: Taehee Yoo <[email protected]>
[ Upstream commit 089bca2caed0d0dea7da235ce1fe245808f5ec02 ]
All bonding device has same lockdep key and subclass is initialized with
nest_level.
But actual nest_level value can be changed when a lower device is attached.
And at this moment, the subclass should be updated but it seems to be
unsafe.
So this patch makes bonding use dynamic lockdep key instead of the
subclass.
Test commands:
ip link add bond0 type bond
for i in {1..5}
do
let A=$i-1
ip link add bond$i type bond
ip link set bond$i master bond$A
done
ip link set bond5 master bond0
Splat looks like:
[ 307.992912] WARNING: possible recursive locking detected
[ 307.993656] 5.4.0-rc3+ #96 Tainted: G W
[ 307.994367] --------------------------------------------
[ 307.995092] ip/761 is trying to acquire lock:
[ 307.995710] ffff8880513aac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding]
[ 307.997045]
but task is already holding lock:
[ 307.997923] ffff88805fcbac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding]
[ 307.999215]
other info that might help us debug this:
[ 308.000251] Possible unsafe locking scenario:
[ 308.001137] CPU0
[ 308.001533] ----
[ 308.001915] lock(&(&bond->stats_lock)->rlock#2/2);
[ 308.002609] lock(&(&bond->stats_lock)->rlock#2/2);
[ 308.003302]
*** DEADLOCK ***
[ 308.004310] May be due to missing lock nesting notation
[ 308.005319] 3 locks held by ip/761:
[ 308.005830] #0: ffffffff9fcc42b0 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x466/0x8a0
[ 308.006894] #1: ffff88805fcbac60 (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0xb8/0x500 [bonding]
[ 308.008243] #2: ffffffff9f9219c0 (rcu_read_lock){....}, at: bond_get_stats+0x9f/0x500 [bonding]
[ 308.009422]
stack backtrace:
[ 308.010124] CPU: 0 PID: 761 Comm: ip Tainted: G W 5.4.0-rc3+ #96
[ 308.011097] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 308.012179] Call Trace:
[ 308.012601] dump_stack+0x7c/0xbb
[ 308.013089] __lock_acquire+0x269d/0x3de0
[ 308.013669] ? register_lock_class+0x14d0/0x14d0
[ 308.014318] lock_acquire+0x164/0x3b0
[ 308.014858] ? bond_get_stats+0xb8/0x500 [bonding]
[ 308.015520] _raw_spin_lock_nested+0x2e/0x60
[ 308.016129] ? bond_get_stats+0xb8/0x500 [bonding]
[ 308.017215] bond_get_stats+0xb8/0x500 [bonding]
[ 308.018454] ? bond_arp_rcv+0xf10/0xf10 [bonding]
[ 308.019710] ? rcu_read_lock_held+0x90/0xa0
[ 308.020605] ? rcu_read_lock_sched_held+0xc0/0xc0
[ 308.021286] ? bond_get_stats+0x9f/0x500 [bonding]
[ 308.021953] dev_get_stats+0x1ec/0x270
[ 308.022508] bond_get_stats+0x1d1/0x500 [bonding]
Fixes: d3fff6c443fe ("net: add netdev_lockdep_set_classes() helper")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/bonding/bond_main.c | 10 +++++++---
include/net/bonding.h | 1 +
2 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 142c5126da759..c3df99f8c3835 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -3459,7 +3459,7 @@ static void bond_get_stats(struct net_device *bond_dev,
struct list_head *iter;
struct slave *slave;
- spin_lock_nested(&bond->stats_lock, bond_get_nest_level(bond_dev));
+ spin_lock(&bond->stats_lock);
memcpy(stats, &bond->bond_stats, sizeof(*stats));
rcu_read_lock();
@@ -4297,8 +4297,6 @@ void bond_setup(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
- spin_lock_init(&bond->mode_lock);
- spin_lock_init(&bond->stats_lock);
bond->params = bonding_defaults;
/* Initialize pointers */
@@ -4367,6 +4365,7 @@ static void bond_uninit(struct net_device *bond_dev)
list_del(&bond->bond_list);
+ lockdep_unregister_key(&bond->stats_lock_key);
bond_debug_unregister(bond);
}
@@ -4773,6 +4772,11 @@ static int bond_init(struct net_device *bond_dev)
bond->nest_level = SINGLE_DEPTH_NESTING;
netdev_lockdep_set_classes(bond_dev);
+ spin_lock_init(&bond->mode_lock);
+ spin_lock_init(&bond->stats_lock);
+ lockdep_register_key(&bond->stats_lock_key);
+ lockdep_set_class(&bond->stats_lock, &bond->stats_lock_key);
+
list_add_tail(&bond->bond_list, &bn->dev_list);
bond_prepare_sysfs_group(bond);
diff --git a/include/net/bonding.h b/include/net/bonding.h
index d416af72404b5..be404b272d6b1 100644
--- a/include/net/bonding.h
+++ b/include/net/bonding.h
@@ -238,6 +238,7 @@ struct bonding {
struct dentry *debug_dir;
#endif /* CONFIG_DEBUG_FS */
struct rtnl_link_stats64 bond_stats;
+ struct lock_class_key stats_lock_key;
};
#define bond_slave_get_rcu(dev) \
--
2.20.1
From: Rafi Wiener <[email protected]>
[ Upstream commit c8973df2da677f375f8b12b6eefca2f44c8884d5 ]
Before QP is closed it changes to ERROR state, when this happens
the QP was left with old rate limit that was already removed from
the table.
Fixes: 7d29f349a4b9 ("IB/mlx5: Properly adjust rate limit on QP state transitions")
Signed-off-by: Rafi Wiener <[email protected]>
Signed-off-by: Oleg Kuporosov <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/mlx5/qp.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index 72869ff4a3342..3903141a387ed 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -3249,10 +3249,12 @@ static int modify_raw_packet_qp_sq(
}
/* Only remove the old rate after new rate was set */
- if ((old_rl.rate &&
- !mlx5_rl_are_equal(&old_rl, &new_rl)) ||
- (new_state != MLX5_SQC_STATE_RDY))
+ if ((old_rl.rate && !mlx5_rl_are_equal(&old_rl, &new_rl)) ||
+ (new_state != MLX5_SQC_STATE_RDY)) {
mlx5_rl_remove_rate(dev, &old_rl);
+ if (new_state != MLX5_SQC_STATE_RDY)
+ memset(&new_rl, 0, sizeof(new_rl));
+ }
ibqp->rl = new_rl;
sq->state = new_state;
--
2.20.1
From: Potnuri Bharat Teja <[email protected]>
[ Upstream commit 612e0486ad0845c41ac10492e78144f99e326375 ]
pass_accept_req() is using the same skb for handling accept request and
sending accept reply to HW. Here req and rpl structures are pointing to
same skb->data which is over written by INIT_TP_WR() and leads to
accessing corrupt req fields in accept_cr() while checking for ECN flags.
Reordered code in accept_cr() to fetch correct req fields.
Fixes: 92e7ae7172 ("iw_cxgb4: Choose appropriate hw mtu index and ISS for iWARP connections")
Signed-off-by: Potnuri Bharat Teja <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/cxgb4/cm.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index e87fc04084704..9e8eca7b613c0 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -2424,20 +2424,6 @@ static int accept_cr(struct c4iw_ep *ep, struct sk_buff *skb,
enum chip_type adapter_type = ep->com.dev->rdev.lldi.adapter_type;
pr_debug("ep %p tid %u\n", ep, ep->hwtid);
-
- skb_get(skb);
- rpl = cplhdr(skb);
- if (!is_t4(adapter_type)) {
- skb_trim(skb, roundup(sizeof(*rpl5), 16));
- rpl5 = (void *)rpl;
- INIT_TP_WR(rpl5, ep->hwtid);
- } else {
- skb_trim(skb, sizeof(*rpl));
- INIT_TP_WR(rpl, ep->hwtid);
- }
- OPCODE_TID(rpl) = cpu_to_be32(MK_OPCODE_TID(CPL_PASS_ACCEPT_RPL,
- ep->hwtid));
-
cxgb_best_mtu(ep->com.dev->rdev.lldi.mtus, ep->mtu, &mtu_idx,
enable_tcp_timestamps && req->tcpopt.tstamp,
(ep->com.remote_addr.ss_family == AF_INET) ? 0 : 1);
@@ -2483,6 +2469,20 @@ static int accept_cr(struct c4iw_ep *ep, struct sk_buff *skb,
if (tcph->ece && tcph->cwr)
opt2 |= CCTRL_ECN_V(1);
}
+
+ skb_get(skb);
+ rpl = cplhdr(skb);
+ if (!is_t4(adapter_type)) {
+ skb_trim(skb, roundup(sizeof(*rpl5), 16));
+ rpl5 = (void *)rpl;
+ INIT_TP_WR(rpl5, ep->hwtid);
+ } else {
+ skb_trim(skb, sizeof(*rpl));
+ INIT_TP_WR(rpl, ep->hwtid);
+ }
+ OPCODE_TID(rpl) = cpu_to_be32(MK_OPCODE_TID(CPL_PASS_ACCEPT_RPL,
+ ep->hwtid));
+
if (CHELSIO_CHIP_VERSION(adapter_type) > CHELSIO_T4) {
u32 isn = (prandom_u32() & ~7UL) - 1;
opt2 |= T5_OPT_2_VALID_F;
--
2.20.1
From: Alexander Shishkin <[email protected]>
commit 9d55499d8da49e9261e95a490f3fda41d955f505 upstream.
This adds support for Intel TH on Jasper Lake PCH.
Signed-off-by: Alexander Shishkin <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hwtracing/intel_th/pci.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/hwtracing/intel_th/pci.c
+++ b/drivers/hwtracing/intel_th/pci.c
@@ -214,6 +214,11 @@ static const struct pci_device_id intel_
PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xa0a6),
.driver_data = (kernel_ulong_t)&intel_th_2x,
},
+ {
+ /* Jasper Lake PCH */
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x4da6),
+ .driver_data = (kernel_ulong_t)&intel_th_2x,
+ },
{ 0 },
};
From: Chandana Kishori Chiluveru <[email protected]>
[ Upstream commit 1c20c89b0421b52b2417bb0f62a611bc669eda1d ]
composite_dev_cleanup call from the failure of configfs_composite_bind
frees up the cdev->os_desc_req and cdev->req. If the previous calls of
bind and unbind is successful these will carry stale values.
Consider the below sequence of function calls:
configfs_composite_bind()
composite_dev_prepare()
- Allocate cdev->req, cdev->req->buf
composite_os_desc_req_prepare()
- Allocate cdev->os_desc_req, cdev->os_desc_req->buf
configfs_composite_unbind()
composite_dev_cleanup()
- free the cdev->os_desc_req->buf and cdev->req->buf
Next composition switch
configfs_composite_bind()
- If it fails goto err_comp_cleanup will call the
composite_dev_cleanup() function
composite_dev_cleanup()
- calls kfree up with the stale values of cdev->req->buf and
cdev->os_desc_req from the previous configfs_composite_bind
call. The free call on these stale values leads to double free.
Hence, Fix this issue by setting request and buffer pointer to NULL after
kfree.
Signed-off-by: Chandana Kishori Chiluveru <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/composite.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 76883ff4f5bb6..c8ae07cd6fbfd 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -2156,14 +2156,18 @@ void composite_dev_cleanup(struct usb_composite_dev *cdev)
usb_ep_dequeue(cdev->gadget->ep0, cdev->os_desc_req);
kfree(cdev->os_desc_req->buf);
+ cdev->os_desc_req->buf = NULL;
usb_ep_free_request(cdev->gadget->ep0, cdev->os_desc_req);
+ cdev->os_desc_req = NULL;
}
if (cdev->req) {
if (cdev->setup_pending)
usb_ep_dequeue(cdev->gadget->ep0, cdev->req);
kfree(cdev->req->buf);
+ cdev->req->buf = NULL;
usb_ep_free_request(cdev->gadget->ep0, cdev->req);
+ cdev->req = NULL;
}
cdev->next_string_id = 0;
device_remove_file(&cdev->gadget->dev, &dev_attr_suspended);
--
2.20.1
From: Alan Stern <[email protected]>
[ Upstream commit d482c7bb0541d19dea8bff437a9f3c5563b5b2d2 ]
Endpoints with a maxpacket length of 0 are probably useless. They
can't transfer any data, and it's not at all unlikely that an HCD will
crash or hang when trying to handle an URB for such an endpoint.
Currently the USB core does not check for endpoints having a maxpacket
value of 0. This patch adds a check, printing a warning and skipping
over any endpoints it catches.
Now, the USB spec does not rule out endpoints having maxpacket = 0.
But since they wouldn't have any practical use, there doesn't seem to
be any good reason for us to accept them.
Signed-off-by: Alan Stern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/core/config.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 151a74a543862..1ac1095bfeac8 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -348,6 +348,11 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
/* Validate the wMaxPacketSize field */
maxp = usb_endpoint_maxp(&endpoint->desc);
+ if (maxp == 0) {
+ dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has wMaxPacketSize 0, skipping\n",
+ cfgno, inum, asnum, d->bEndpointAddress);
+ goto skip_to_next_endpoint_or_interface_descriptor;
+ }
/* Find the highest legal maxpacket size for this endpoint */
i = 0; /* additional transactions per microframe */
--
2.20.1
From: Johan Hovold <[email protected]>
commit 3759739426186a924675651b388d1c3963c5710e upstream.
The driver was accessing its driver data after having freed it.
Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Cc: stable <[email protected]> # 3.9
Cc: Bernd Krumboeck <[email protected]>
Cc: Wolfgang Grandegger <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/usb_8dev.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/net/can/usb/usb_8dev.c
+++ b/drivers/net/can/usb/usb_8dev.c
@@ -996,9 +996,8 @@ static void usb_8dev_disconnect(struct u
netdev_info(priv->netdev, "device disconnected\n");
unregister_netdev(priv->netdev);
- free_candev(priv->netdev);
-
unlink_all_urbs(priv);
+ free_candev(priv->netdev);
}
}
From: Jiri Benc <[email protected]>
[ Upstream commit 11875ba7f251c52effb2b924e04c2ddefa9856ef ]
Out of the three nc implementations widely in use, at least two (BSD netcat
and nmap-ncat) do not support -l combined with -s. Modify the nc invocation
to be accepted by all of them.
Fixes: 7df5e3db8f63 ("selftests: bpf: tc-bpf flow shaping with EDT")
Signed-off-by: Jiri Benc <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Peter Oskolkov <[email protected]>
Link: https://lore.kernel.org/bpf/f5bf07dccd8b552a76c84d49e80b86c5aa071122.1571400024.git.jbenc@redhat.com
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/bpf/test_tc_edt.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/bpf/test_tc_edt.sh b/tools/testing/selftests/bpf/test_tc_edt.sh
index f38567ef694b6..daa7d1b8d3092 100755
--- a/tools/testing/selftests/bpf/test_tc_edt.sh
+++ b/tools/testing/selftests/bpf/test_tc_edt.sh
@@ -59,7 +59,7 @@ ip netns exec ${NS_SRC} tc filter add dev veth_src egress \
# start the listener
ip netns exec ${NS_DST} bash -c \
- "nc -4 -l -s ${IP_DST} -p 9000 >/dev/null &"
+ "nc -4 -l -p 9000 >/dev/null &"
declare -i NC_PID=$!
sleep 1
--
2.20.1
From: Potnuri Bharat Teja <[email protected]>
[ Upstream commit d4934f45693651ea15357dd6c7c36be28b6da884 ]
_put_ep_safe() and _put_pass_ep_safe() free the skb before it is freed by
process_work(). fix double free by freeing the skb only in process_work().
Fixes: 1dad0ebeea1c ("iw_cxgb4: Avoid touch after free error in ARP failure handlers")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dakshaja Uppalapati <[email protected]>
Signed-off-by: Potnuri Bharat Teja <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/cxgb4/cm.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 9e8eca7b613c0..347dc242fb882 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -495,7 +495,6 @@ static int _put_ep_safe(struct c4iw_dev *dev, struct sk_buff *skb)
ep = *((struct c4iw_ep **)(skb->cb + 2 * sizeof(void *)));
release_ep_resources(ep);
- kfree_skb(skb);
return 0;
}
@@ -506,7 +505,6 @@ static int _put_pass_ep_safe(struct c4iw_dev *dev, struct sk_buff *skb)
ep = *((struct c4iw_ep **)(skb->cb + 2 * sizeof(void *)));
c4iw_put_ep(&ep->parent_ep->com);
release_ep_resources(ep);
- kfree_skb(skb);
return 0;
}
--
2.20.1
From: Eugeniy Paltsev <[email protected]>
[ Upstream commit 8ca8fa7f22dcb0a3265490a690b0c3e27de681f9 ]
HSDK board has sst26wf016b SPI NOR flash IC installed, enable it.
Acked-by: Alexey Brodkin <[email protected]>
Signed-off-by: Eugeniy Paltsev <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arc/boot/dts/hsdk.dts | 8 ++++++++
arch/arc/configs/hsdk_defconfig | 2 ++
2 files changed, 10 insertions(+)
diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index bfc7f5f5d6f26..9bea5daadd23f 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -264,6 +264,14 @@
clocks = <&input_clk>;
cs-gpios = <&creg_gpio 0 GPIO_ACTIVE_LOW>,
<&creg_gpio 1 GPIO_ACTIVE_LOW>;
+
+ spi-flash@0 {
+ compatible = "sst26wf016b", "jedec,spi-nor";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <4000000>;
+ };
};
creg_gpio: gpio@14b0 {
diff --git a/arch/arc/configs/hsdk_defconfig b/arch/arc/configs/hsdk_defconfig
index 403125d9c9a34..fe9de80e41ee3 100644
--- a/arch/arc/configs/hsdk_defconfig
+++ b/arch/arc/configs/hsdk_defconfig
@@ -31,6 +31,8 @@ CONFIG_INET=y
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_SPI_NOR=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
--
2.20.1
From: Dan Carpenter <[email protected]>
[ Upstream commit a9018adfde809d44e71189b984fa61cc89682b5e ]
The issue is in drivers/infiniband/core/uverbs_std_types_cq.c in the
UVERBS_HANDLER(UVERBS_METHOD_CQ_CREATE) function. We check that:
if (attr.comp_vector >= attrs->ufile->device->num_comp_vectors) {
But we don't check if "attr.comp_vector" is negative. It could
potentially lead to an array underflow. My concern would be where
cq->vector is used in the create_cq() function from the cxgb4 driver.
And really "attr.comp_vector" is appears as a u32 to user space so that's
the right type to use.
Fixes: 9ee79fce3642 ("IB/core: Add completion queue (cq) object actions")
Link: https://lore.kernel.org/r/20191011133419.GA22905@mwanda
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/uverbs.h | 2 +-
include/rdma/ib_verbs.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/core/uverbs.h b/drivers/infiniband/core/uverbs.h
index 1e5aeb39f774d..63f7f7db59028 100644
--- a/drivers/infiniband/core/uverbs.h
+++ b/drivers/infiniband/core/uverbs.h
@@ -98,7 +98,7 @@ ib_uverbs_init_udata_buf_or_null(struct ib_udata *udata,
struct ib_uverbs_device {
atomic_t refcount;
- int num_comp_vectors;
+ u32 num_comp_vectors;
struct completion comp;
struct device dev;
/* First group for device attributes, NULL terminated array */
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 4f225175cb91e..77d8df4518051 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -327,7 +327,7 @@ struct ib_tm_caps {
struct ib_cq_init_attr {
unsigned int cqe;
- int comp_vector;
+ u32 comp_vector;
u32 flags;
};
--
2.20.1
From: Navid Emamdoost <[email protected]>
[ Upstream commit c7ed6d0183d5ea9bc31bcaeeba4070bd62546471 ]
In mlx5_fw_fatal_reporter_dump if mlx5_crdump_collect fails the
allocated memory for cr_data must be released otherwise there will be
memory leak. To fix this, this commit changes the return instruction
into goto error handling.
Fixes: 9b1f29823605 ("net/mlx5: Add support for FW fatal reporter dump")
Signed-off-by: Navid Emamdoost <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/health.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/health.c b/drivers/net/ethernet/mellanox/mlx5/core/health.c
index d685122d9ff76..c07f3154437c6 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/health.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/health.c
@@ -572,7 +572,7 @@ mlx5_fw_fatal_reporter_dump(struct devlink_health_reporter *reporter,
return -ENOMEM;
err = mlx5_crdump_collect(dev, cr_data);
if (err)
- return err;
+ goto free_data;
if (priv_ctx) {
struct mlx5_fw_reporter_ctx *fw_reporter_ctx = priv_ctx;
--
2.20.1
From: Magnus Karlsson <[email protected]>
[ Upstream commit 2afd23f78f39da84937006ecd24aa664a4ab052b ]
Having Rx-only AF_XDP sockets can potentially lead to a crash in the
system by a NULL pointer dereference in xsk_umem_consume_tx(). This
function iterates through a list of all sockets tied to a umem and
checks if there are any packets to send on the Tx ring. Rx-only
sockets do not have a Tx ring, so this will cause a NULL pointer
dereference. This will happen if you have registered one or more
Rx-only sockets to a umem and the driver is checking the Tx ring even
on Rx, or if the XDP_SHARED_UMEM mode is used and there is a mix of
Rx-only and other sockets tied to the same umem.
Fixed by only putting sockets with a Tx component on the list that
xsk_umem_consume_tx() iterates over.
Fixes: ac98d8aab61b ("xsk: wire upp Tx zero-copy functions")
Reported-by: Kal Cutter Conley <[email protected]>
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Jonathan Lemon <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
net/xdp/xdp_umem.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/net/xdp/xdp_umem.c b/net/xdp/xdp_umem.c
index 688aac7a6943a..182f9eb48dde9 100644
--- a/net/xdp/xdp_umem.c
+++ b/net/xdp/xdp_umem.c
@@ -26,6 +26,9 @@ void xdp_add_sk_umem(struct xdp_umem *umem, struct xdp_sock *xs)
{
unsigned long flags;
+ if (!xs->tx)
+ return;
+
spin_lock_irqsave(&umem->xsk_list_lock, flags);
list_add_rcu(&xs->list, &umem->xsk_list);
spin_unlock_irqrestore(&umem->xsk_list_lock, flags);
@@ -35,6 +38,9 @@ void xdp_del_sk_umem(struct xdp_umem *umem, struct xdp_sock *xs)
{
unsigned long flags;
+ if (!xs->tx)
+ return;
+
spin_lock_irqsave(&umem->xsk_list_lock, flags);
list_del_rcu(&xs->list);
spin_unlock_irqrestore(&umem->xsk_list_lock, flags);
--
2.20.1
From: Yinbo Zhu <[email protected]>
[ Upstream commit a7d9874c6f3fbc8d25cd9ceba35b6822612c4ebf ]
layerscape board sometimes reported some usb call trace, that is due to
kernel sent LPM tokerns automatically when it has no pending transfers
and think that the link is idle enough to enter L1, which procedure will
ask usb register has a recovery,then kernel will compare USBx_GFLADJ and
set GFLADJ_30MHZ, GFLADJ_30MHZ_REG until GFLADJ_30MHZ is equal 0x20, if
the conditions were met then issue occur, but whatever the conditions
whether were met that usb is all need keep GFLADJ_30MHZ of value is 0x20
(xhci spec ask use GFLADJ_30MHZ to adjust any offset from clock source
that generates the clock that drives the SOF counter, 0x20 is default
value of it)That is normal logic, so need remove the call trace.
Signed-off-by: Yinbo Zhu <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc3/core.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index c9bb93a2c81e2..06d7e8612dfed 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -300,8 +300,7 @@ static void dwc3_frame_length_adjustment(struct dwc3 *dwc)
reg = dwc3_readl(dwc->regs, DWC3_GFLADJ);
dft = reg & DWC3_GFLADJ_30MHZ_MASK;
- if (!dev_WARN_ONCE(dwc->dev, dft == dwc->fladj,
- "request value same as default, ignoring\n")) {
+ if (dft != dwc->fladj) {
reg &= ~DWC3_GFLADJ_30MHZ_MASK;
reg |= DWC3_GFLADJ_30MHZ_SDBND_SEL | dwc->fladj;
dwc3_writel(dwc->regs, DWC3_GFLADJ, reg);
--
2.20.1
From: Pierre-Eric Pelloux-Prayer <[email protected]>
[ Upstream commit 9bdf63d3579e36942f4b91d3558a90da8116bb40 ]
This seems to help with https://bugs.freedesktop.org/show_bug.cgi?id=111481.
v2: insert a NOP instead of skipping all 0-sized IBs to avoid breaking older hw
Signed-off-by: Pierre-Eric Pelloux-Prayer <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
index 5eeb72fcc123a..6a51e6a4a035b 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v10_0.c
@@ -264,6 +264,7 @@ static void gmc_v10_0_flush_gpu_tlb(struct amdgpu_device *adev,
job->vm_pd_addr = amdgpu_gmc_pd_addr(adev->gart.bo);
job->vm_needs_flush = true;
+ job->ibs->ptr[job->ibs->length_dw++] = ring->funcs->nop;
amdgpu_ring_pad_ib(ring, &job->ibs[0]);
r = amdgpu_job_submit(job, &adev->mman.entity,
AMDGPU_FENCE_OWNER_UNDEFINED, &fence);
--
2.20.1
From: Jun Lei <[email protected]>
[ Upstream commit 7c37d399c2b84d4b79de4d512a38373f1d71ab90 ]
Signed-off-by: Jun Lei <[email protected]>
Reviewed-by: Aric Cyr <[email protected]>
Acked-by: Leo Li <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20.c b/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20.c
index 649883777f62a..6c6c486b774a4 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20.c
@@ -2577,7 +2577,8 @@ static void dml20_DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPer
mode_lib->vba.MinActiveDRAMClockChangeMargin
+ mode_lib->vba.DRAMClockChangeLatency;
- if (mode_lib->vba.MinActiveDRAMClockChangeMargin > 0) {
+ if (mode_lib->vba.MinActiveDRAMClockChangeMargin > 50) {
+ mode_lib->vba.DRAMClockChangeWatermark += 25;
mode_lib->vba.DRAMClockChangeSupport[0][0] = dm_dram_clock_change_vactive;
} else {
if (mode_lib->vba.SynchronizedVBlank || mode_lib->vba.NumberOfActivePlanes == 1) {
--
2.20.1
From: Mark Zhang <[email protected]>
[ Upstream commit a15542bb72a48042f5df7475893d46f725f5f9fb ]
The counter resource should return -EAGAIN if it was requested for a
different port, this is similar to how QP works if the users provides a
port filter.
Otherwise port filtering in netlink will return broken counter nests.
Fixes: c4ffee7c9bdb ("RDMA/netlink: Implement counter dumpit calback")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Zhang <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Reviewed-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/nldev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/infiniband/core/nldev.c b/drivers/infiniband/core/nldev.c
index f42e856f30729..4300e21865845 100644
--- a/drivers/infiniband/core/nldev.c
+++ b/drivers/infiniband/core/nldev.c
@@ -778,7 +778,7 @@ static int fill_res_counter_entry(struct sk_buff *msg, bool has_cap_net_admin,
container_of(res, struct rdma_counter, res);
if (port && port != counter->port)
- return 0;
+ return -EAGAIN;
/* Dump it even query failed */
rdma_counter_query_stats(counter);
--
2.20.1
From: zhongshiqi <[email protected]>
[ Upstream commit 364593f3ee5fdefc6efd89475e1804c928b4e6ba ]
dc.c:583:null check is needed after using kzalloc function
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: zhongshiqi <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/core/dc.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index 730f97ba8dbbe..dd4731ab935cd 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -566,6 +566,10 @@ static bool construct(struct dc *dc,
#ifdef CONFIG_DRM_AMD_DC_DCN2_0
// Allocate memory for the vm_helper
dc->vm_helper = kzalloc(sizeof(struct vm_helper), GFP_KERNEL);
+ if (!dc->vm_helper) {
+ dm_error("%s: failed to create dc->vm_helper\n", __func__);
+ goto fail;
+ }
#endif
memcpy(&dc->bb_overrides, &init_params->bb_overrides, sizeof(dc->bb_overrides));
--
2.20.1
From: Taehee Yoo <[email protected]>
[ Upstream commit 2bce1ebed17da54c65042ec2b962e3234bad5b47 ]
When a macsec interface is created, it increases a refcnt to a lower
device(real device). when macsec interface is deleted, the refcnt is
decreased in macsec_free_netdev(), which is ->priv_destructor() of
macsec interface.
The problem scenario is this.
When nested macsec interfaces are exiting, the exit routine of the
macsec module makes refcnt leaks.
Test commands:
ip link add dummy0 type dummy
ip link add macsec0 link dummy0 type macsec
ip link add macsec1 link macsec0 type macsec
modprobe -rv macsec
[ 208.629433] unregister_netdevice: waiting for macsec0 to become free. Usage count = 1
Steps of exit routine of macsec module are below.
1. Calls ->dellink() in __rtnl_link_unregister().
2. Checks refcnt and wait refcnt to be 0 if refcnt is not 0 in
netdev_run_todo().
3. Calls ->priv_destruvtor() in netdev_run_todo().
Step2 checks refcnt, but step3 decreases refcnt.
So, step2 waits forever.
This patch makes the macsec module do not hold a refcnt of the lower
device because it already holds a refcnt of the lower device with
netdev_upper_dev_link().
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/macsec.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/net/macsec.c b/drivers/net/macsec.c
index cb7637364b40d..1bd113b142ea7 100644
--- a/drivers/net/macsec.c
+++ b/drivers/net/macsec.c
@@ -3001,12 +3001,10 @@ static const struct nla_policy macsec_rtnl_policy[IFLA_MACSEC_MAX + 1] = {
static void macsec_free_netdev(struct net_device *dev)
{
struct macsec_dev *macsec = macsec_priv(dev);
- struct net_device *real_dev = macsec->real_dev;
free_percpu(macsec->stats);
free_percpu(macsec->secy.tx_sc.stats);
- dev_put(real_dev);
}
static void macsec_setup(struct net_device *dev)
@@ -3261,8 +3259,6 @@ static int macsec_newlink(struct net *net, struct net_device *dev,
if (err < 0)
return err;
- dev_hold(real_dev);
-
macsec->nest_level = dev_get_nest_level(real_dev) + 1;
netdev_lockdep_set_classes(dev);
lockdep_set_class_and_subclass(&dev->addr_list_lock,
--
2.20.1
From: Arnd Bergmann <[email protected]>
[ Upstream commit a51bab592fbbef10f0e42a8aed86adfbf6a68fa7 ]
After many randconfig builds, one configuration caused a link
error with dwc3-meson-g12a lacking the regmap-mmio code:
drivers/usb/dwc3/dwc3-meson-g12a.o: In function `dwc3_meson_g12a_probe':
dwc3-meson-g12a.c:(.text+0x9f): undefined reference to `__devm_regmap_init_mmio_clk'
Add the select statement that we have for all other users
of that dependency.
Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Acked-by: Neil Armstrong <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc3/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 89abc6078703f..556a876c78962 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -102,6 +102,7 @@ config USB_DWC3_MESON_G12A
depends on ARCH_MESON || COMPILE_TEST
default USB_DWC3
select USB_ROLE_SWITCH
+ select REGMAP_MMIO
help
Support USB2/3 functionality in Amlogic G12A platforms.
Say 'Y' or 'M' if you have one such device.
--
2.20.1
From: Trond Myklebust <[email protected]>
[ Upstream commit 669996add4c92476e0f8d6b4cd2bb308d1939fd7 ]
When we're destroying the host transport mechanism, we should ensure
that we do not leak memory by failing to release any back channel
slots that might still exist.
Reported-by: Neil Brown <[email protected]>
Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/sunrpc/bc_xprt.h | 5 +++++
net/sunrpc/backchannel_rqst.c | 2 +-
net/sunrpc/xprt.c | 5 +++++
3 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/include/linux/sunrpc/bc_xprt.h b/include/linux/sunrpc/bc_xprt.h
index 87d27e13d8859..d796058cdff2a 100644
--- a/include/linux/sunrpc/bc_xprt.h
+++ b/include/linux/sunrpc/bc_xprt.h
@@ -64,6 +64,11 @@ static inline int xprt_setup_backchannel(struct rpc_xprt *xprt,
return 0;
}
+static inline void xprt_destroy_backchannel(struct rpc_xprt *xprt,
+ unsigned int max_reqs)
+{
+}
+
static inline bool svc_is_backchannel(const struct svc_rqst *rqstp)
{
return false;
diff --git a/net/sunrpc/backchannel_rqst.c b/net/sunrpc/backchannel_rqst.c
index 7eb251372f947..195b40c5dae4b 100644
--- a/net/sunrpc/backchannel_rqst.c
+++ b/net/sunrpc/backchannel_rqst.c
@@ -220,7 +220,7 @@ void xprt_destroy_bc(struct rpc_xprt *xprt, unsigned int max_reqs)
goto out;
spin_lock_bh(&xprt->bc_pa_lock);
- xprt->bc_alloc_max -= max_reqs;
+ xprt->bc_alloc_max -= min(max_reqs, xprt->bc_alloc_max);
list_for_each_entry_safe(req, tmp, &xprt->bc_pa_list, rq_bc_pa_list) {
dprintk("RPC: req=%p\n", req);
list_del(&req->rq_bc_pa_list);
diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index 20631d64312cb..ac796f3d42409 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -1935,6 +1935,11 @@ static void xprt_destroy_cb(struct work_struct *work)
rpc_destroy_wait_queue(&xprt->sending);
rpc_destroy_wait_queue(&xprt->backlog);
kfree(xprt->servername);
+ /*
+ * Destroy any existing back channel
+ */
+ xprt_destroy_backchannel(xprt, UINT_MAX);
+
/*
* Tear down transport state and free the rpc_xprt
*/
--
2.20.1
From: Daniel Wagner <[email protected]>
[ Upstream commit 535fb49e730a6fe1e9f11af4ae67ef4228ff4287 ]
The queue pointer might not be valid. The rest of the code checks the
pointer before accessing it. lpfc_sli4_process_missed_mbox_completions is
the only place where the check is missing.
Fixes: 657add4e5e15 ("scsi: lpfc: Fix poor use of hardware queues if fewer irq vectors")
Cc: James Smart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Wagner <[email protected]>
Reviewed-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_sli.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index f9e6a135d6565..c7027ecd4d19e 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -7898,7 +7898,7 @@ lpfc_sli4_process_missed_mbox_completions(struct lpfc_hba *phba)
if (sli4_hba->hdwq) {
for (eqidx = 0; eqidx < phba->cfg_irq_chann; eqidx++) {
eq = phba->sli4_hba.hba_eq_hdl[eqidx].eq;
- if (eq->queue_id == sli4_hba->mbx_cq->assoc_qid) {
+ if (eq && eq->queue_id == sli4_hba->mbx_cq->assoc_qid) {
fpeq = eq;
break;
}
--
2.20.1
From: Haiyang Zhang <[email protected]>
[ Upstream commit 719b85c336ed35565d0f3982269d6f684087bb00 ]
If rndis_filter_open() fails, we need to remove the rndis device created
in earlier steps, before returning an error code. Otherwise, the retry of
netvsc_attach() from its callers will fail and hang.
Fixes: 7b2ee50c0cd5 ("hv_netvsc: common detach logic")
Signed-off-by: Haiyang Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/hyperv/netvsc_drv.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index e8fce6d715ef0..8ed79b418d88a 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -982,7 +982,7 @@ static int netvsc_attach(struct net_device *ndev,
if (netif_running(ndev)) {
ret = rndis_filter_open(nvdev);
if (ret)
- return ret;
+ goto err;
rdev = nvdev->extension;
if (!rdev->link_state)
@@ -990,6 +990,13 @@ static int netvsc_attach(struct net_device *ndev,
}
return 0;
+
+err:
+ netif_device_detach(ndev);
+
+ rndis_filter_device_remove(hdev, nvdev);
+
+ return ret;
}
static int netvsc_set_channels(struct net_device *net,
--
2.20.1
From: Bjorn Andersson <[email protected]>
[ Upstream commit 36c602dcdd872e9f9b91aae5266b6d7d72b69b96 ]
The Kryo cores share errata 1009 with Falkor, so add their model
definitions and enable it for them as well.
Signed-off-by: Bjorn Andersson <[email protected]>
[will: Update entry in silicon-errata.rst]
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
Documentation/arm64/silicon-errata.rst | 2 +-
arch/arm64/kernel/cpu_errata.c | 20 ++++++++++++++------
2 files changed, 15 insertions(+), 7 deletions(-)
diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
index 6e52d334bc555..47feda6c15bcc 100644
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@@ -124,7 +124,7 @@ stable kernels.
+----------------+-----------------+-----------------+-----------------------------+
| Qualcomm Tech. | Kryo/Falkor v1 | E1003 | QCOM_FALKOR_ERRATUM_1003 |
+----------------+-----------------+-----------------+-----------------------------+
-| Qualcomm Tech. | Falkor v1 | E1009 | QCOM_FALKOR_ERRATUM_1009 |
+| Qualcomm Tech. | Kryo/Falkor v1 | E1009 | QCOM_FALKOR_ERRATUM_1009 |
+----------------+-----------------+-----------------+-----------------------------+
| Qualcomm Tech. | QDF2400 ITS | E0065 | QCOM_QDF2400_ERRATUM_0065 |
+----------------+-----------------+-----------------+-----------------------------+
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 1e0b9ae9bf7e2..4465be78ee466 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -659,17 +659,23 @@ static const struct midr_range arm64_harden_el2_vectors[] = {
#endif
#ifdef CONFIG_ARM64_WORKAROUND_REPEAT_TLBI
-
-static const struct midr_range arm64_repeat_tlbi_cpus[] = {
+static const struct arm64_cpu_capabilities arm64_repeat_tlbi_list[] = {
#ifdef CONFIG_QCOM_FALKOR_ERRATUM_1009
- MIDR_RANGE(MIDR_QCOM_FALKOR_V1, 0, 0, 0, 0),
+ {
+ ERRATA_MIDR_REV(MIDR_QCOM_FALKOR_V1, 0, 0)
+ },
+ {
+ .midr_range.model = MIDR_QCOM_KRYO,
+ .matches = is_kryo_midr,
+ },
#endif
#ifdef CONFIG_ARM64_ERRATUM_1286807
- MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 0),
+ {
+ ERRATA_MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 0),
+ },
#endif
{},
};
-
#endif
#ifdef CONFIG_CAVIUM_ERRATUM_27456
@@ -825,7 +831,9 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
{
.desc = "Qualcomm erratum 1009, ARM erratum 1286807",
.capability = ARM64_WORKAROUND_REPEAT_TLBI,
- ERRATA_MIDR_RANGE_LIST(arm64_repeat_tlbi_cpus),
+ .type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+ .matches = cpucap_multi_entry_cap_matches,
+ .match_list = arm64_repeat_tlbi_list,
},
#endif
#ifdef CONFIG_ARM64_ERRATUM_858921
--
2.20.1
From: Felipe Balbi <[email protected]>
[ Upstream commit d8eca64eec7103ab1fbabc0a187dbf6acfb2af93 ]
When disabling an endpoint which has cancelled requests, we should
make sure to giveback requests that are currently pending in the
cancelled list, otherwise we may fall into a situation where command
completion interrupt fires after endpoint has been disabled, therefore
causing a splat.
Fixes: fec9095bdef4 "usb: dwc3: gadget: remove wait_end_transfer"
Reported-by: Roger Quadros <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc3/gadget.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 173f5329d3d9e..56bd6ae0c18f9 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -707,6 +707,12 @@ static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep)
dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
}
+
+ while (!list_empty(&dep->cancelled_list)) {
+ req = next_request(&dep->cancelled_list);
+
+ dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
+ }
}
/**
--
2.20.1
From: Valentin Schneider <[email protected]>
[ Upstream commit cd1cb3350561d2bf544ddfef76fbf0b1c9c7178f ]
Turns out hotplugging CPUs that are in exclusive cpusets can lead to the
cpuset code feeding empty cpumasks to the sched domain rebuild machinery.
This leads to the following splat:
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 235 Comm: kworker/5:2 Not tainted 5.4.0-rc1-00005-g8d495477d62e #23
Hardware name: ARM Juno development board (r0) (DT)
Workqueue: events cpuset_hotplug_workfn
pstate: 60000005 (nZCv daif -PAN -UAO)
pc : build_sched_domains (./include/linux/arch_topology.h:23 kernel/sched/topology.c:1898 kernel/sched/topology.c:1969)
lr : build_sched_domains (kernel/sched/topology.c:1966)
Call trace:
build_sched_domains (./include/linux/arch_topology.h:23 kernel/sched/topology.c:1898 kernel/sched/topology.c:1969)
partition_sched_domains_locked (kernel/sched/topology.c:2250)
rebuild_sched_domains_locked (./include/linux/bitmap.h:370 ./include/linux/cpumask.h:538 kernel/cgroup/cpuset.c:955 kernel/cgroup/cpuset.c:978 kernel/cgroup/cpuset.c:1019)
rebuild_sched_domains (kernel/cgroup/cpuset.c:1032)
cpuset_hotplug_workfn (kernel/cgroup/cpuset.c:3205 (discriminator 2))
process_one_work (./arch/arm64/include/asm/jump_label.h:21 ./include/linux/jump_label.h:200 ./include/trace/events/workqueue.h:114 kernel/workqueue.c:2274)
worker_thread (./include/linux/compiler.h:199 ./include/linux/list.h:268 kernel/workqueue.c:2416)
kthread (kernel/kthread.c:255)
ret_from_fork (arch/arm64/kernel/entry.S:1167)
Code: f860dae2 912802d6 aa1603e1 12800000 (f8616853)
The faulty line in question is:
cap = arch_scale_cpu_capacity(cpumask_first(cpu_map));
and we're not checking the return value against nr_cpu_ids (we shouldn't
have to!), which leads to the above.
Prevent generate_sched_domains() from returning empty cpumasks, and add
some assertion in build_sched_domains() to scream bloody murder if it
happens again.
The above splat was obtained on my Juno r0 with the following reproducer:
$ cgcreate -g cpuset:asym
$ cgset -r cpuset.cpus=0-3 asym
$ cgset -r cpuset.mems=0 asym
$ cgset -r cpuset.cpu_exclusive=1 asym
$ cgcreate -g cpuset:smp
$ cgset -r cpuset.cpus=4-5 smp
$ cgset -r cpuset.mems=0 smp
$ cgset -r cpuset.cpu_exclusive=1 smp
$ cgset -r cpuset.sched_load_balance=0 .
$ echo 0 > /sys/devices/system/cpu/cpu4/online
$ echo 0 > /sys/devices/system/cpu/cpu5/online
Signed-off-by: Valentin Schneider <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: [email protected]
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Fixes: 05484e098448 ("sched/topology: Add SD_ASYM_CPUCAPACITY flag detection")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/cgroup/cpuset.c | 3 ++-
kernel/sched/topology.c | 5 ++++-
2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/kernel/cgroup/cpuset.c b/kernel/cgroup/cpuset.c
index 5aa37531ce76f..a8122c405603b 100644
--- a/kernel/cgroup/cpuset.c
+++ b/kernel/cgroup/cpuset.c
@@ -786,7 +786,8 @@ static int generate_sched_domains(cpumask_var_t **domains,
cpumask_subset(cp->cpus_allowed, top_cpuset.effective_cpus))
continue;
- if (is_sched_load_balance(cp))
+ if (is_sched_load_balance(cp) &&
+ !cpumask_empty(cp->effective_cpus))
csa[csn++] = cp;
/* skip @cp's subtree if not a partition root */
diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c
index f751ce0b783e5..1906edb44d63c 100644
--- a/kernel/sched/topology.c
+++ b/kernel/sched/topology.c
@@ -1927,7 +1927,7 @@ next_level:
static int
build_sched_domains(const struct cpumask *cpu_map, struct sched_domain_attr *attr)
{
- enum s_alloc alloc_state;
+ enum s_alloc alloc_state = sa_none;
struct sched_domain *sd;
struct s_data d;
struct rq *rq = NULL;
@@ -1935,6 +1935,9 @@ build_sched_domains(const struct cpumask *cpu_map, struct sched_domain_attr *att
struct sched_domain_topology_level *tl_asym;
bool has_asym = false;
+ if (WARN_ON(cpumask_empty(cpu_map)))
+ goto error;
+
alloc_state = __visit_domain_allocation_hell(&d, cpu_map);
if (alloc_state != sa_rootdomain)
goto error;
--
2.20.1
From: Kim Phillips <[email protected]>
[ Upstream commit 317b96bb14303c7998dbcd5bc606bd8038fdd4b4 ]
The loop that reads all the IBS MSRs into *buf stopped one MSR short of
reading the IbsOpData register, which contains the RipInvalid status bit.
Fix the offset_max assignment so the MSR gets read, so the RIP invalid
evaluation is based on what the IBS h/w output, instead of what was
left in memory.
Signed-off-by: Kim Phillips <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vince Weaver <[email protected]>
Fixes: d47e8238cd76 ("perf/x86-ibs: Take instruction pointer from ibs sample")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/events/amd/ibs.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c
index 5b35b7ea5d728..98ba21a588a15 100644
--- a/arch/x86/events/amd/ibs.c
+++ b/arch/x86/events/amd/ibs.c
@@ -614,7 +614,7 @@ fail:
if (event->attr.sample_type & PERF_SAMPLE_RAW)
offset_max = perf_ibs->offset_max;
else if (check_rip)
- offset_max = 2;
+ offset_max = 3;
else
offset_max = 1;
do {
--
2.20.1
From: Kim Phillips <[email protected]>
[ Upstream commit e431e79b60603079d269e0c2a5177943b95fa4b6 ]
This saves us writing the IBS control MSR twice when disabling the
event.
I searched revision guides for all families since 10h, and did not
find occurrence of erratum #420, nor anything remotely similar:
so we isolate the secondary MSR write to family 10h only.
Also unconditionally update the count mask for IBS Op implementations
that have read & writeable current count (CurCnt) fields in addition
to the MaxCnt field. These bits were reserved on prior
implementations, and therefore shouldn't have negative impact.
Signed-off-by: Kim Phillips <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vince Weaver <[email protected]>
Fixes: c9574fe0bdb9 ("perf/x86-ibs: Implement workaround for IBS erratum #420")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/events/amd/ibs.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c
index 98ba21a588a15..26c36357c4c9c 100644
--- a/arch/x86/events/amd/ibs.c
+++ b/arch/x86/events/amd/ibs.c
@@ -377,7 +377,8 @@ static inline void perf_ibs_disable_event(struct perf_ibs *perf_ibs,
struct hw_perf_event *hwc, u64 config)
{
config &= ~perf_ibs->cnt_mask;
- wrmsrl(hwc->config_base, config);
+ if (boot_cpu_data.x86 == 0x10)
+ wrmsrl(hwc->config_base, config);
config &= ~perf_ibs->enable_mask;
wrmsrl(hwc->config_base, config);
}
@@ -553,7 +554,8 @@ static struct perf_ibs perf_ibs_op = {
},
.msr = MSR_AMD64_IBSOPCTL,
.config_mask = IBS_OP_CONFIG_MASK,
- .cnt_mask = IBS_OP_MAX_CNT,
+ .cnt_mask = IBS_OP_MAX_CNT | IBS_OP_CUR_CNT |
+ IBS_OP_CUR_CNT_RAND,
.enable_mask = IBS_OP_ENABLE,
.valid_mask = IBS_OP_VAL,
.max_period = IBS_OP_MAX_CNT << 4,
--
2.20.1
From: Johan Hovold <[email protected]>
[ Upstream commit 88f6bf3846ee90bf33aa1ce848cd3bfb3229f4a4 ]
A recent info-leak bug manifested itself along with warning about a
negative buffer overflow:
ldusb 1-1:0.28: Read buffer overflow, -131383859965943 bytes dropped
when it was really a rather large positive one.
A sanity check that prevents this has now been put in place, but let's
fix up the size format specifiers, which should all be unsigned.
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/misc/ldusb.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index f5e34c5034547..8f86b4ebca898 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -487,7 +487,7 @@ static ssize_t ld_usb_read(struct file *file, char __user *buffer, size_t count,
}
bytes_to_read = min(count, *actual_buffer);
if (bytes_to_read < *actual_buffer)
- dev_warn(&dev->intf->dev, "Read buffer overflow, %zd bytes dropped\n",
+ dev_warn(&dev->intf->dev, "Read buffer overflow, %zu bytes dropped\n",
*actual_buffer-bytes_to_read);
/* copy one interrupt_in_buffer from ring_buffer into userspace */
@@ -562,8 +562,9 @@ static ssize_t ld_usb_write(struct file *file, const char __user *buffer,
/* write the data into interrupt_out_buffer from userspace */
bytes_to_write = min(count, write_buffer_size*dev->interrupt_out_endpoint_size);
if (bytes_to_write < count)
- dev_warn(&dev->intf->dev, "Write buffer overflow, %zd bytes dropped\n", count-bytes_to_write);
- dev_dbg(&dev->intf->dev, "%s: count = %zd, bytes_to_write = %zd\n",
+ dev_warn(&dev->intf->dev, "Write buffer overflow, %zu bytes dropped\n",
+ count - bytes_to_write);
+ dev_dbg(&dev->intf->dev, "%s: count = %zu, bytes_to_write = %zu\n",
__func__, count, bytes_to_write);
if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write)) {
--
2.20.1
From: GwanYeong Kim <[email protected]>
[ Upstream commit 28df0642abbf6d66908a2858922a7e4b21cdd8c2 ]
This isn't really accurate right. fread() doesn't always
return 0 in error. It could return < number of elements
and set errno.
Signed-off-by: GwanYeong Kim <[email protected]>
Acked-by: Shuah Khan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/usb/usbip/libsrc/usbip_device_driver.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/tools/usb/usbip/libsrc/usbip_device_driver.c b/tools/usb/usbip/libsrc/usbip_device_driver.c
index 5a3726eb44abc..b237a43e62990 100644
--- a/tools/usb/usbip/libsrc/usbip_device_driver.c
+++ b/tools/usb/usbip/libsrc/usbip_device_driver.c
@@ -69,7 +69,7 @@ int read_usb_vudc_device(struct udev_device *sdev, struct usbip_usb_device *dev)
FILE *fd = NULL;
struct udev_device *plat;
const char *speed;
- int ret = 0;
+ size_t ret;
plat = udev_device_get_parent(sdev);
path = udev_device_get_syspath(plat);
@@ -79,8 +79,10 @@ int read_usb_vudc_device(struct udev_device *sdev, struct usbip_usb_device *dev)
if (!fd)
return -1;
ret = fread((char *) &descr, sizeof(descr), 1, fd);
- if (ret < 0)
+ if (ret != 1) {
+ err("Cannot read vudc device descr file: %s", strerror(errno));
goto err;
+ }
fclose(fd);
copy_descr_attr(dev, &descr, bDeviceClass);
--
2.20.1
From: Chuhong Yuan <[email protected]>
[ Upstream commit 4202e219edd6cc164c042e16fa327525410705ae ]
The remove misses to disable and unprepare priv->macclk like what is done
when probe fails.
Add the missed call in remove.
Signed-off-by: Chuhong Yuan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/arc/emac_rockchip.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/arc/emac_rockchip.c b/drivers/net/ethernet/arc/emac_rockchip.c
index 42d2e1b02c440..664d664e09250 100644
--- a/drivers/net/ethernet/arc/emac_rockchip.c
+++ b/drivers/net/ethernet/arc/emac_rockchip.c
@@ -256,6 +256,9 @@ static int emac_rockchip_remove(struct platform_device *pdev)
if (priv->regulator)
regulator_disable(priv->regulator);
+ if (priv->soc_data->need_div_macclk)
+ clk_disable_unprepare(priv->macclk);
+
free_netdev(ndev);
return err;
}
--
2.20.1
From: Wenwen Wang <[email protected]>
[ Upstream commit 8472ba62154058b64ebb83d5f57259a352d28697 ]
In e1000_set_ringparam(), 'tx_old' and 'rx_old' are not deallocated if
e1000_up() fails, leading to memory leaks. Refactor the code to fix this
issue.
Signed-off-by: Wenwen Wang <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
index a41008523c983..2e07ffa87e346 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
@@ -607,6 +607,7 @@ static int e1000_set_ringparam(struct net_device *netdev,
for (i = 0; i < adapter->num_rx_queues; i++)
rxdr[i].count = rxdr->count;
+ err = 0;
if (netif_running(adapter->netdev)) {
/* Try to get new resources before deleting old */
err = e1000_setup_all_rx_resources(adapter);
@@ -627,14 +628,13 @@ static int e1000_set_ringparam(struct net_device *netdev,
adapter->rx_ring = rxdr;
adapter->tx_ring = txdr;
err = e1000_up(adapter);
- if (err)
- goto err_setup;
}
kfree(tx_old);
kfree(rx_old);
clear_bit(__E1000_RESETTING, &adapter->flags);
- return 0;
+ return err;
+
err_setup_tx:
e1000_free_all_rx_resources(adapter);
err_setup_rx:
@@ -646,7 +646,6 @@ err_alloc_rx:
err_alloc_tx:
if (netif_running(adapter->netdev))
e1000_up(adapter);
-err_setup:
clear_bit(__E1000_RESETTING, &adapter->flags);
return err;
}
--
2.20.1
From: Hans de Goede <[email protected]>
[ Upstream commit 63bdef6cd6941917c823b9cc9aa0219d19fcb716 ]
Commit 03c4749dd6c7 ("gpio / ACPI: Drop unnecessary ACPI GPIO to Linux
GPIO translation") has made the cherryview gpio numbers sparse, to get
a 1:1 mapping between ACPI pin numbers and gpio numbers in Linux.
This has greatly simplified things, but the code setting the
irq_valid_mask was not updated for this, so the valid mask is still in
the old "compressed" numbering with the gaps in the pin numbers skipped,
which is wrong as irq_valid_mask needs to be expressed in gpio numbers.
This results in the following error on devices using pin 24 (0x0018) on
the north GPIO controller as an ACPI event source:
[ 0.422452] cherryview-pinctrl INT33FF:01: Failed to translate GPIO to IRQ
This has been reported (by email) to be happening on a Caterpillar CAT T20
tablet and I've reproduced this myself on a Medion Akoya e2215t 2-in-1.
This commit uses the pin number instead of the compressed index into
community->pins to clear the correct bits in irq_valid_mask for GPIOs
using GPEs for interrupts, fixing these errors and in case of the
Medion Akoya e2215t also fixing the LID switch not working.
Cc: [email protected]
Fixes: 03c4749dd6c7 ("gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation")
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Mika Westerberg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/intel/pinctrl-cherryview.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c
index bf049d1bbb87c..17a248b723b9b 100644
--- a/drivers/pinctrl/intel/pinctrl-cherryview.c
+++ b/drivers/pinctrl/intel/pinctrl-cherryview.c
@@ -1584,7 +1584,7 @@ static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq)
intsel >>= CHV_PADCTRL0_INTSEL_SHIFT;
if (need_valid_mask && intsel >= community->nirqs)
- clear_bit(i, chip->irq.valid_mask);
+ clear_bit(desc->number, chip->irq.valid_mask);
}
/*
--
2.20.1
From: Valentin Schneider <[email protected]>
[ Upstream commit e284df705cf1eeedb5ec3a66ed82d17a64659150 ]
While the static key is correctly initialized as being disabled, it will
remain forever enabled once turned on. This means that if we start with an
asymmetric system and hotplug out enough CPUs to end up with an SMP system,
the static key will remain set - which is obviously wrong. We should detect
this and turn off things like misfit migration and capacity aware wakeups.
As Quentin pointed out, having separate root domains makes this slightly
trickier. We could have exclusive cpusets that create an SMP island - IOW,
the domains within this root domain will not see any asymmetry. This means
we can't just disable the key on domain destruction, we need to count how
many asymmetric root domains we have.
Consider the following example using Juno r0 which is 2+4 big.LITTLE, where
two identical cpusets are created: they both span both big and LITTLE CPUs:
asym0 asym1
[ ][ ]
L L B L L B
$ cgcreate -g cpuset:asym0
$ cgset -r cpuset.cpus=0,1,3 asym0
$ cgset -r cpuset.mems=0 asym0
$ cgset -r cpuset.cpu_exclusive=1 asym0
$ cgcreate -g cpuset:asym1
$ cgset -r cpuset.cpus=2,4,5 asym1
$ cgset -r cpuset.mems=0 asym1
$ cgset -r cpuset.cpu_exclusive=1 asym1
$ cgset -r cpuset.sched_load_balance=0 .
(the CPU numbering may look odd because on the Juno LITTLEs are CPUs 0,3-5
and bigs are CPUs 1-2)
If we make one of those SMP (IOW remove asymmetry) by e.g. hotplugging its
big core, we would end up with an SMP cpuset and an asymmetric cpuset - the
static key must remain set, because we still have one asymmetric root domain.
With the above example, this could be done with:
$ echo 0 > /sys/devices/system/cpu/cpu2/online
Which would result in:
asym0 asym1
[ ][ ]
L L B L L
When both SMP and asymmetric cpusets are present, all CPUs will observe
sched_asym_cpucapacity being set (it is system-wide), but not all CPUs
observe asymmetry in their sched domain hierarchy:
per_cpu(sd_asym_cpucapacity, <any CPU in asym0>) == <some SD at DIE level>
per_cpu(sd_asym_cpucapacity, <any CPU in asym1>) == NULL
Change the simple key enablement to an increment, and decrement the key
counter when destroying domains that cover asymmetric CPUs.
Signed-off-by: Valentin Schneider <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Dietmar Eggemann <[email protected]>
Cc: [email protected]
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Fixes: df054e8445a4 ("sched/topology: Add static_key for asymmetric CPU capacity optimizations")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/topology.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/kernel/sched/topology.c b/kernel/sched/topology.c
index 1906edb44d63c..93a8749763ea0 100644
--- a/kernel/sched/topology.c
+++ b/kernel/sched/topology.c
@@ -2008,7 +2008,7 @@ build_sched_domains(const struct cpumask *cpu_map, struct sched_domain_attr *att
rcu_read_unlock();
if (has_asym)
- static_branch_enable_cpuslocked(&sched_asym_cpucapacity);
+ static_branch_inc_cpuslocked(&sched_asym_cpucapacity);
if (rq && sched_debug_enabled) {
pr_info("root domain span: %*pbl (max cpu_capacity = %lu)\n",
@@ -2103,8 +2103,12 @@ int sched_init_domains(const struct cpumask *cpu_map)
*/
static void detach_destroy_domains(const struct cpumask *cpu_map)
{
+ unsigned int cpu = cpumask_any(cpu_map);
int i;
+ if (rcu_access_pointer(per_cpu(sd_asym_cpucapacity, cpu)))
+ static_branch_dec_cpuslocked(&sched_asym_cpucapacity);
+
rcu_read_lock();
for_each_cpu(i, cpu_map)
cpu_attach_domain(NULL, &def_root_domain, i);
--
2.20.1
From: yuqi jin <[email protected]>
[ Upstream commit 34c15202896d11e3974788daf9005a84ec45f7a2 ]
When the address width of DMA is greater than 32, the packet header occupies
a BD descriptor. The starting address of the data should be added to the
header length.
Fixes: a993db88d17d ("net: stmmac: Enable support for > 32 Bits addressing in XGMAC")
Cc: Eric Dumazet <[email protected]>
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Maxime Coquelin <[email protected]>
Signed-off-by: yuqi jin <[email protected]>
Signed-off-by: Shaokun Zhang <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index fe2d3029de5ea..ed0e694a08553 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2906,6 +2906,7 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
} else {
stmmac_set_desc_addr(priv, first, des);
tmp_pay_len = pay_len;
+ des += proto_hdr_len;
}
stmmac_tso_allocator(priv, des, tmp_pay_len, (nfrags == 0), queue);
--
2.20.1
From: Trond Myklebust <[email protected]>
[ Upstream commit 9edb455e6797bb50aa38ef71e62668966065ede8 ]
If there are RDMA back channel requests being processed by the
server threads, then we should hold a reference to the transport
to ensure it doesn't get freed from underneath us.
Reported-by: Neil Brown <[email protected]>
Fixes: 63cae47005af ("xprtrdma: Handle incoming backward direction RPC calls")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sunrpc/xprtrdma/backchannel.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/net/sunrpc/xprtrdma/backchannel.c b/net/sunrpc/xprtrdma/backchannel.c
index 59e624b1d7a0d..7cccaab9a17ae 100644
--- a/net/sunrpc/xprtrdma/backchannel.c
+++ b/net/sunrpc/xprtrdma/backchannel.c
@@ -165,6 +165,7 @@ void xprt_rdma_bc_free_rqst(struct rpc_rqst *rqst)
spin_lock(&xprt->bc_pa_lock);
list_add_tail(&rqst->rq_bc_pa_list, &xprt->bc_pa_list);
spin_unlock(&xprt->bc_pa_lock);
+ xprt_put(xprt);
}
static struct rpc_rqst *rpcrdma_bc_rqst_get(struct rpcrdma_xprt *r_xprt)
@@ -261,6 +262,7 @@ void rpcrdma_bc_receive_call(struct rpcrdma_xprt *r_xprt,
/* Queue rqst for ULP's callback service */
bc_serv = xprt->bc_serv;
+ xprt_get(xprt);
spin_lock(&bc_serv->sv_cb_lock);
list_add(&rqst->rq_bc_list, &bc_serv->sv_cb_list);
spin_unlock(&bc_serv->sv_cb_lock);
--
2.20.1
From: Leonard Crestez <[email protected]>
[ Upstream commit b234fe9558615098d8d62516e7041ad7f99ebcea ]
During cpu frequency switching the main "CLK_ARM" is reparented to an
intermediate "step" clock. On imx8mm and imx8mn the 24M oscillator is
used for this purpose but it is extremely slow, increasing wakeup
latencies to the point that i2c transactions can timeout and system
becomes unresponsive.
Fix by switching the "step" clk to SYS_PLL1_800M, matching the behavior
of imx8m cpufreq drivers in imx vendor tree.
This bug was not immediately apparent because upstream arm64 defconfig
uses the "performance" governor by default so no cpufreq transitions
happen.
Fixes: ba5625c3e272 ("clk: imx: Add clock driver support for imx8mm")
Fixes: 96d6392b54db ("clk: imx: Add support for i.MX8MN clock driver")
Cc: [email protected]
Signed-off-by: Leonard Crestez <[email protected]>
Link: https://lkml.kernel.org/r/f5d2b9c53f1ed5ccb1dd3c6624f56759d92e1689.1571771777.git.leonard.crestez@nxp.com
Acked-by: Shawn Guo <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/imx/clk-imx8mm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
index 6f46bcb1d6432..59ce93691e970 100644
--- a/drivers/clk/imx/clk-imx8mm.c
+++ b/drivers/clk/imx/clk-imx8mm.c
@@ -666,7 +666,7 @@ static int __init imx8mm_clocks_init(struct device_node *ccm_node)
clks[IMX8MM_CLK_A53_DIV],
clks[IMX8MM_CLK_A53_SRC],
clks[IMX8MM_ARM_PLL_OUT],
- clks[IMX8MM_CLK_24M]);
+ clks[IMX8MM_SYS_PLL1_800M]);
imx_check_clocks(clks, ARRAY_SIZE(clks));
--
2.20.1
From: Nicolin Chen <[email protected]>
[ Upstream commit 2ccb4f16d013a0954459061d38172b1c53553ba6 ]
After introducing "samples" to the calculation of wait time, the
driver might timeout at the regmap_field_read_poll_timeout call,
because the wait time could be longer than the 100000 usec limit
due to a large "samples" number.
So this patch sets the timeout limit to 2 times of the wait time
in order to fix this issue.
Fixes: 5c090abf945b ("hwmon: (ina3221) Add averaging mode support")
Signed-off-by: Nicolin Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/ina3221.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/ina3221.c b/drivers/hwmon/ina3221.c
index 0037e2bdacd6b..8a51dcf055eab 100644
--- a/drivers/hwmon/ina3221.c
+++ b/drivers/hwmon/ina3221.c
@@ -170,7 +170,7 @@ static inline int ina3221_wait_for_data(struct ina3221_data *ina)
/* Polling the CVRF bit to make sure read data is ready */
return regmap_field_read_poll_timeout(ina->fields[F_CVRF],
- cvrf, cvrf, wait, 100000);
+ cvrf, cvrf, wait, wait * 2);
}
static int ina3221_read_value(struct ina3221_data *ina, unsigned int reg,
--
2.20.1
From: Vladimir Oltean <[email protected]>
[ Upstream commit b9cd75e6689560140dadaed98eb4b41aad75d55d ]
The switch driver keeps a "vid" variable per port, which signifies _the_
VLAN ID that is stripped on that port's egress (aka the native VLAN on a
trunk port).
That is the way the hardware is designed (mostly). The port->vid is
programmed into REW:PORT:PORT_VLAN_CFG:PORT_VID and the rewriter is told
to send all traffic as tagged except the one having port->vid.
There exists a possibility of finer-grained egress untagging decisions:
using the VCAP IS1 engine, one rule can be added to match every
VLAN-tagged frame whose VLAN should be untagged, and set POP_CNT=1 as
action. However, the IS1 can hold at most 512 entries, and the VLANs are
in the order of 6 * 4096.
So the code is fine for now. But this sequence of commands:
$ bridge vlan add dev swp0 vid 1 pvid untagged
$ bridge vlan add dev swp0 vid 2 untagged
makes untagged and pvid-tagged traffic be sent out of swp0 as tagged
with VID 1, despite user's request.
Prevent that from happening. The user should temporarily remove the
existing untagged VLAN (1 in this case), add it back as tagged, and then
add the new untagged VLAN (2 in this case).
Cc: Antoine Tenart <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Fixes: 7142529f1688 ("net: mscc: ocelot: add VLAN filtering")
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mscc/ocelot.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index 07ca3e0cdf92b..7ffe5959a7e73 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -260,8 +260,15 @@ static int ocelot_vlan_vid_add(struct net_device *dev, u16 vid, bool pvid,
port->pvid = vid;
/* Untagged egress vlan clasification */
- if (untagged)
+ if (untagged && port->vid != vid) {
+ if (port->vid) {
+ dev_err(ocelot->dev,
+ "Port already has a native VLAN: %d\n",
+ port->vid);
+ return -EBUSY;
+ }
port->vid = vid;
+ }
ocelot_vlan_port_apply(ocelot, port);
--
2.20.1
From: Anton Eidelman <[email protected]>
[ Upstream commit af8fd0424713a2adb812d10d55e86718152cf656 ]
The following scenario results in an IO hang:
1) ctrl completes a request with NVME_SC_ANA_TRANSITION.
NVME_NS_ANA_PENDING bit in ns->flags is set and ana_work is triggered.
2) ana_work: nvme_read_ana_log() tries to get the ANA log page from the ctrl.
This fails because ctrl disconnects.
Therefore nvme_update_ns_ana_state() is not called
and NVME_NS_ANA_PENDING bit in ns->flags is not cleared.
3) ctrl reconnects: nvme_mpath_init(ctrl,...) calls
nvme_read_ana_log(ctrl, groups_only=true).
However, nvme_update_ana_state() does not update namespaces
because nr_nsids = 0 (due to groups_only mode).
4) scan_work calls nvme_validate_ns() finds the ns and re-validates OK.
Result:
The ctrl is now live but NVME_NS_ANA_PENDING bit in ns->flags is still set.
Consequently ctrl will never be considered a viable path by __nvme_find_path().
IO will hang if ctrl is the only or the last path to the namespace.
More generally, while ctrl is reconnecting, its ANA state may change.
And because nvme_mpath_init() requests ANA log in groups_only mode,
these changes are not propagated to the existing ctrl namespaces.
This may result in a mal-function or an IO hang.
Solution:
nvme_mpath_init() will nvme_read_ana_log() with groups_only set to false.
This will not harm the new ctrl case (no namespaces present),
and will make sure the ANA state of namespaces gets updated after reconnect.
Note: Another option would be for nvme_mpath_init() to invoke
nvme_parse_ana_log(..., nvme_set_ns_ana_state) for each existing namespace.
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Anton Eidelman <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/multipath.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 30de7efef0035..d320684d25b20 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -715,7 +715,7 @@ int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id)
goto out;
}
- error = nvme_read_ana_log(ctrl, true);
+ error = nvme_read_ana_log(ctrl, false);
if (error)
goto out_free_ana_log_buf;
return 0;
--
2.20.1
From: Takashi Iwai <[email protected]>
[ Upstream commit ad3e8da2d422c63c13819a53d3c5ea9312cc0b9d ]
Acer Aspire A315-41 requires the very same workaround as the existing
quirk for Dell Latitude 5495. Add the new entry for that.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1137799
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/amd_iommu_quirks.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/iommu/amd_iommu_quirks.c b/drivers/iommu/amd_iommu_quirks.c
index c235f79b7a200..5120ce4fdce32 100644
--- a/drivers/iommu/amd_iommu_quirks.c
+++ b/drivers/iommu/amd_iommu_quirks.c
@@ -73,6 +73,19 @@ static const struct dmi_system_id ivrs_quirks[] __initconst = {
},
.driver_data = (void *)&ivrs_ioapic_quirks[DELL_LATITUDE_5495],
},
+ {
+ /*
+ * Acer Aspire A315-41 requires the very same workaround as
+ * Dell Latitude 5495
+ */
+ .callback = ivrs_ioapic_quirk_cb,
+ .ident = "Acer Aspire A315-41",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire A315-41"),
+ },
+ .driver_data = (void *)&ivrs_ioapic_quirks[DELL_LATITUDE_5495],
+ },
{
.callback = ivrs_ioapic_quirk_cb,
.ident = "Lenovo ideapad 330S-15ARR",
--
2.20.1
From: Will Deacon <[email protected]>
[ Upstream commit 85ac30fa2e24f628e9f4f9344460f4015d33fd7d ]
In the highly unlikely event that we fail to allocate either of the
"/txrx" or "/control" workqueues, we should bail cleanly rather than
blindly march on with NULL queue pointer(s) installed in the
'fjes_adapter' instance.
Cc: "David S. Miller" <[email protected]>
Reported-by: Nicolas Waisman <[email protected]>
Link: https://lore.kernel.org/lkml/CADJ_3a8WFrs5NouXNqS5WYe7rebFP+_A5CheeqAyD_p7DFJJcg@mail.gmail.com/
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/fjes/fjes_main.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/net/fjes/fjes_main.c b/drivers/net/fjes/fjes_main.c
index bbbc1dcb6ab5c..b517c1af9de05 100644
--- a/drivers/net/fjes/fjes_main.c
+++ b/drivers/net/fjes/fjes_main.c
@@ -1237,8 +1237,17 @@ static int fjes_probe(struct platform_device *plat_dev)
adapter->open_guard = false;
adapter->txrx_wq = alloc_workqueue(DRV_NAME "/txrx", WQ_MEM_RECLAIM, 0);
+ if (unlikely(!adapter->txrx_wq)) {
+ err = -ENOMEM;
+ goto err_free_netdev;
+ }
+
adapter->control_wq = alloc_workqueue(DRV_NAME "/control",
WQ_MEM_RECLAIM, 0);
+ if (unlikely(!adapter->control_wq)) {
+ err = -ENOMEM;
+ goto err_free_txrx_wq;
+ }
INIT_WORK(&adapter->tx_stall_task, fjes_tx_stall_task);
INIT_WORK(&adapter->raise_intr_rxdata_task,
@@ -1255,7 +1264,7 @@ static int fjes_probe(struct platform_device *plat_dev)
hw->hw_res.irq = platform_get_irq(plat_dev, 0);
err = fjes_hw_init(&adapter->hw);
if (err)
- goto err_free_netdev;
+ goto err_free_control_wq;
/* setup MAC address (02:00:00:00:00:[epid])*/
netdev->dev_addr[0] = 2;
@@ -1277,6 +1286,10 @@ static int fjes_probe(struct platform_device *plat_dev)
err_hw_exit:
fjes_hw_exit(&adapter->hw);
+err_free_control_wq:
+ destroy_workqueue(adapter->control_wq);
+err_free_txrx_wq:
+ destroy_workqueue(adapter->txrx_wq);
err_free_netdev:
free_netdev(netdev);
err_out:
--
2.20.1
From: Lorenzo Bianconi <[email protected]>
[ Upstream commit 7bd0650be63cbb9e45e394d689c81365fe48e495 ]
mt76 dma layer is supposed to unmap skb data buffers while keep txwi
mapped on hw dma ring. At the moment mt76 wrongly unmap txwi or does
not unmap data fragments in even positions for non-linear skbs. This
issue may result in hw hangs with A-MSDU if the system relies on IOMMU
or SWIOTLB. Fix this behaviour properly unmapping data fragments on
non-linear skbs.
Fixes: 17f1de56df05 ("mt76: add common code shared between multiple chipsets")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/mediatek/mt76/dma.c | 6 ++++--
drivers/net/wireless/mediatek/mt76/mt76.h | 5 +++--
2 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/dma.c b/drivers/net/wireless/mediatek/mt76/dma.c
index d8f61e540bfd3..ed744cd19819c 100644
--- a/drivers/net/wireless/mediatek/mt76/dma.c
+++ b/drivers/net/wireless/mediatek/mt76/dma.c
@@ -64,8 +64,10 @@ mt76_dma_add_buf(struct mt76_dev *dev, struct mt76_queue *q,
u32 ctrl;
int i, idx = -1;
- if (txwi)
+ if (txwi) {
q->entry[q->head].txwi = DMA_DUMMY_DATA;
+ q->entry[q->head].skip_buf0 = true;
+ }
for (i = 0; i < nbufs; i += 2, buf += 2) {
u32 buf0 = buf[0].addr, buf1 = 0;
@@ -108,7 +110,7 @@ mt76_dma_tx_cleanup_idx(struct mt76_dev *dev, struct mt76_queue *q, int idx,
__le32 __ctrl = READ_ONCE(q->desc[idx].ctrl);
u32 ctrl = le32_to_cpu(__ctrl);
- if (!e->txwi || !e->skb) {
+ if (!e->skip_buf0) {
__le32 addr = READ_ONCE(q->desc[idx].buf0);
u32 len = FIELD_GET(MT_DMA_CTL_SD_LEN0, ctrl);
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 989386ecb5e4e..e98859ab480b7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -102,8 +102,9 @@ struct mt76_queue_entry {
struct urb *urb;
};
enum mt76_txq_id qid;
- bool schedule;
- bool done;
+ bool skip_buf0:1;
+ bool schedule:1;
+ bool done:1;
};
struct mt76_queue_regs {
--
2.20.1
From: Navid Emamdoost <[email protected]>
[ Upstream commit 6f3ef5c25cc762687a7341c18cbea5af54461407 ]
In the implementation of i2400m_op_rfkill_sw_toggle() the allocated
buffer for cmd should be released before returning. The
documentation for i2400m_msg_to_dev() says when it returns the buffer
can be reused. Meaning cmd should be released in either case. Move
kfree(cmd) before return to be reached by all execution paths.
Fixes: 2507e6ab7a9a ("wimax: i2400: fix memory leak")
Signed-off-by: Navid Emamdoost <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wimax/i2400m/op-rfkill.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wimax/i2400m/op-rfkill.c b/drivers/net/wimax/i2400m/op-rfkill.c
index 8efb493ceec2f..5c79f052cad20 100644
--- a/drivers/net/wimax/i2400m/op-rfkill.c
+++ b/drivers/net/wimax/i2400m/op-rfkill.c
@@ -127,12 +127,12 @@ int i2400m_op_rfkill_sw_toggle(struct wimax_dev *wimax_dev,
"%d\n", result);
result = 0;
error_cmd:
- kfree(cmd);
kfree_skb(ack_skb);
error_msg_to_dev:
error_alloc:
d_fnend(4, dev, "(wimax_dev %p state %d) = %d\n",
wimax_dev, state, result);
+ kfree(cmd);
return result;
}
--
2.20.1
From: Andrey Grodzovsky <[email protected]>
[ Upstream commit 57c0f58e9f562089de5f0b60da103677d232374c ]
Use ERR_PTR to return back the error happened during amdgpu_ib_schedule.
Signed-off-by: Andrey Grodzovsky <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_job.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
index 9d76e0923a5a3..96b2a31ccfed3 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
@@ -218,7 +218,7 @@ static struct dma_fence *amdgpu_job_run(struct drm_sched_job *sched_job)
struct amdgpu_ring *ring = to_amdgpu_ring(sched_job->sched);
struct dma_fence *fence = NULL, *finished;
struct amdgpu_job *job;
- int r;
+ int r = 0;
job = to_amdgpu_job(sched_job);
finished = &job->base.s_fence->finished;
@@ -243,6 +243,8 @@ static struct dma_fence *amdgpu_job_run(struct drm_sched_job *sched_job)
job->fence = dma_fence_get(fence);
amdgpu_job_free_resources(job);
+
+ fence = r ? ERR_PTR(r) : fence;
return fence;
}
--
2.20.1
From: Florian Fainelli <[email protected]>
[ Upstream commit e059770cb1cdfbcbe3f1748f76005861cc79dd1a ]
Add the Brahma-B53 CPU (all versions) to the whitelists of CPUs for the
SSB and spectre v2 mitigations.
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/kernel/cpu_errata.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index d9da4201ba858..799d62ef7a9bd 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -489,6 +489,7 @@ static const struct midr_range arm64_ssb_cpus[] = {
MIDR_ALL_VERSIONS(MIDR_CORTEX_A35),
MIDR_ALL_VERSIONS(MIDR_CORTEX_A53),
MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
+ MIDR_ALL_VERSIONS(MIDR_BRAHMA_B53),
{},
};
@@ -573,6 +574,7 @@ static const struct midr_range spectre_v2_safe_list[] = {
MIDR_ALL_VERSIONS(MIDR_CORTEX_A35),
MIDR_ALL_VERSIONS(MIDR_CORTEX_A53),
MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
+ MIDR_ALL_VERSIONS(MIDR_BRAHMA_B53),
{ /* sentinel */ }
};
--
2.20.1
From: Lijun Ou <[email protected]>
[ Upstream commit b681a0529968d2261aa15d7a1e78801b2c06bb07 ]
eq->buf_list->buf and eq->buf_list should also be freed when eqe_hop_num
is set to 0, or there will be memory leaks.
Fixes: a5073d6054f7 ("RDMA/hns: Add eq support of hip08")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lijun Ou <[email protected]>
Signed-off-by: Weihang Li <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index b76e3beeafb8f..854898433916b 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -5268,9 +5268,9 @@ static void hns_roce_v2_free_eq(struct hns_roce_dev *hr_dev,
return;
}
- if (eq->buf_list)
- dma_free_coherent(hr_dev->dev, buf_chk_sz,
- eq->buf_list->buf, eq->buf_list->map);
+ dma_free_coherent(hr_dev->dev, buf_chk_sz, eq->buf_list->buf,
+ eq->buf_list->map);
+ kfree(eq->buf_list);
}
static void hns_roce_config_eqc(struct hns_roce_dev *hr_dev,
--
2.20.1
From: Vladimir Oltean <[email protected]>
[ Upstream commit 1c44ce560b4de639f237b458be1729489ff44d0a ]
Background information: the driver operates the hardware in a mode where
a single VLAN can be transmitted as untagged on a particular egress
port. That is the "native VLAN on trunk port" use case. Its value is
held in port->vid.
Consider the following command sequence (no network manager, all
interfaces are down, debugging prints added by me):
$ ip link add dev br0 type bridge vlan_filtering 1
$ ip link set dev swp0 master br0
Kernel code path during last command:
br_add_slave -> ocelot_netdevice_port_event (NETDEV_CHANGEUPPER):
[ 21.401901] ocelot_vlan_port_apply: port 0 vlan aware 0 pvid 0 vid 0
br_add_slave -> nbp_vlan_init -> switchdev_port_attr_set -> ocelot_port_attr_set (SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING):
[ 21.413335] ocelot_vlan_port_apply: port 0 vlan aware 1 pvid 0 vid 0
br_add_slave -> nbp_vlan_init -> nbp_vlan_add -> br_switchdev_port_vlan_add -> switchdev_port_obj_add -> ocelot_port_obj_add -> ocelot_vlan_vid_add
[ 21.667421] ocelot_vlan_port_apply: port 0 vlan aware 1 pvid 1 vid 1
So far so good. The bridge has replaced the driver's default pvid used
in standalone mode (0) with its own default_pvid (1). The port's vid
(native VLAN) has also changed from 0 to 1.
$ ip link set dev swp0 up
[ 31.722956] 8021q: adding VLAN 0 to HW filter on device swp0
do_setlink -> dev_change_flags -> vlan_vid_add -> ocelot_vlan_rx_add_vid -> ocelot_vlan_vid_add:
[ 31.728700] ocelot_vlan_port_apply: port 0 vlan aware 1 pvid 1 vid 0
The 8021q module uses the .ndo_vlan_rx_add_vid API on .ndo_open to make
ports be able to transmit and receive 802.1p-tagged traffic by default.
This API is supposed to offload a VLAN sub-interface, which for a switch
port means to add a VLAN that is not a pvid, and tagged on egress.
But the driver implementation of .ndo_vlan_rx_add_vid is wrong: it adds
back vid 0 as "egress untagged". Now back to the initial paragraph:
there is a single untagged VID that the driver keeps track of, and that
has just changed from 1 (the pvid) to 0. So this breaks the bridge
core's expectation, because it has changed vid 1 from untagged to
tagged, when what the user sees is.
$ bridge vlan
port vlan ids
swp0 1 PVID Egress Untagged
br0 1 PVID Egress Untagged
But curiously, instead of manifesting itself as "untagged and
pvid-tagged traffic gets sent as tagged on egress", the bug:
- is hidden when vlan_filtering=0
- manifests as dropped traffic when vlan_filtering=1, due to this setting:
if (port->vlan_aware && !port->vid)
/* If port is vlan-aware and tagged, drop untagged and priority
* tagged frames.
*/
val |= ANA_PORT_DROP_CFG_DROP_UNTAGGED_ENA |
ANA_PORT_DROP_CFG_DROP_PRIO_S_TAGGED_ENA |
ANA_PORT_DROP_CFG_DROP_PRIO_C_TAGGED_ENA;
which would have made sense if it weren't for this bug. The setting's
intention was "this is a trunk port with no native VLAN, so don't accept
untagged traffic". So the driver was never expecting to set VLAN 0 as
the value of the native VLAN, 0 was just encoding for "invalid".
So the fix is to not send 802.1p traffic as untagged, because that would
change the port's native vlan to 0, unbeknownst to the bridge, and
trigger unexpected code paths in the driver.
Cc: Antoine Tenart <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Fixes: 7142529f1688 ("net: mscc: ocelot: add VLAN filtering")
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
Reviewed-by: Horatiu Vultur <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mscc/ocelot.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c
index dc78940f08fb1..07ca3e0cdf92b 100644
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -877,7 +877,7 @@ end:
static int ocelot_vlan_rx_add_vid(struct net_device *dev, __be16 proto,
u16 vid)
{
- return ocelot_vlan_vid_add(dev, vid, false, true);
+ return ocelot_vlan_vid_add(dev, vid, false, false);
}
static int ocelot_vlan_rx_kill_vid(struct net_device *dev, __be16 proto,
--
2.20.1
From: Jiangfeng Xiao <[email protected]>
[ Upstream commit 63a41746827cb16dc6ad0d4d761ab4e7dda7a0c3 ]
When rmmod hip04_eth.ko, we can get the following warning:
Task track: rmmod(1623)>bash(1591)>login(1581)>init(1)
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1623 at kernel/irq/manage.c:1557 __free_irq+0xa4/0x2ac()
Trying to free already-free IRQ 200
Modules linked in: ping(O) pramdisk(O) cpuinfo(O) rtos_snapshot(O) interrupt_ctrl(O) mtdblock mtd_blkdevrtfs nfs_acl nfs lockd grace sunrpc xt_tcpudp ipt_REJECT iptable_filter ip_tables x_tables nf_reject_ipv
CPU: 0 PID: 1623 Comm: rmmod Tainted: G O 4.4.193 #1
Hardware name: Hisilicon A15
[<c020b408>] (rtos_unwind_backtrace) from [<c0206624>] (show_stack+0x10/0x14)
[<c0206624>] (show_stack) from [<c03f2be4>] (dump_stack+0xa0/0xd8)
[<c03f2be4>] (dump_stack) from [<c021a780>] (warn_slowpath_common+0x84/0xb0)
[<c021a780>] (warn_slowpath_common) from [<c021a7e8>] (warn_slowpath_fmt+0x3c/0x68)
[<c021a7e8>] (warn_slowpath_fmt) from [<c026876c>] (__free_irq+0xa4/0x2ac)
[<c026876c>] (__free_irq) from [<c0268a14>] (free_irq+0x60/0x7c)
[<c0268a14>] (free_irq) from [<c0469e80>] (release_nodes+0x1c4/0x1ec)
[<c0469e80>] (release_nodes) from [<c0466924>] (__device_release_driver+0xa8/0x104)
[<c0466924>] (__device_release_driver) from [<c0466a80>] (driver_detach+0xd0/0xf8)
[<c0466a80>] (driver_detach) from [<c0465e18>] (bus_remove_driver+0x64/0x8c)
[<c0465e18>] (bus_remove_driver) from [<c02935b0>] (SyS_delete_module+0x198/0x1e0)
[<c02935b0>] (SyS_delete_module) from [<c0202ed0>] (__sys_trace_return+0x0/0x10)
---[ end trace bb25d6123d849b44 ]---
Currently "rmmod hip04_eth.ko" call free_irq more than once
as devres_release_all and hip04_remove both call free_irq.
This results in a 'Trying to free already-free IRQ' warning.
To solve the problem free_irq has been moved out of hip04_remove.
Signed-off-by: Jiangfeng Xiao <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/hisilicon/hip04_eth.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/ethernet/hisilicon/hip04_eth.c b/drivers/net/ethernet/hisilicon/hip04_eth.c
index f51bc0255556f..4606a7e4a6d19 100644
--- a/drivers/net/ethernet/hisilicon/hip04_eth.c
+++ b/drivers/net/ethernet/hisilicon/hip04_eth.c
@@ -1041,7 +1041,6 @@ static int hip04_remove(struct platform_device *pdev)
hip04_free_ring(ndev, d);
unregister_netdev(ndev);
- free_irq(ndev->irq, ndev);
of_node_put(priv->phy_node);
cancel_work_sync(&priv->tx_timeout_task);
free_netdev(ndev);
--
2.20.1
From: Michael Strauss <[email protected]>
[ Upstream commit bc2fde42e2418808dbfc04de1a6da91d7d31cf1a ]
[WHY]
i2c_read is called to differentiate passive DP->HDMI and DP->DVI-D dongles
The call is expected to fail in DVI-D case but pass in HDMI case
Some HDMI dongles have a chance to fail as well, causing misdetection as DVI-D
[HOW]
Retry i2c_read to ensure failed result is valid
Signed-off-by: Michael Strauss <[email protected]>
Reviewed-by: Tony Cheng <[email protected]>
Acked-by: Leo Li <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../gpu/drm/amd/display/dc/core/dc_link_ddc.c | 24 ++++++++++++++-----
1 file changed, 18 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c
index e6da8506128bd..623c1ab4d3db2 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_ddc.c
@@ -374,6 +374,7 @@ void dal_ddc_service_i2c_query_dp_dual_mode_adaptor(
enum display_dongle_type *dongle = &sink_cap->dongle_type;
uint8_t type2_dongle_buf[DP_ADAPTOR_TYPE2_SIZE];
bool is_type2_dongle = false;
+ int retry_count = 2;
struct dp_hdmi_dongle_signature_data *dongle_signature;
/* Assume we have no valid DP passive dongle connected */
@@ -386,13 +387,24 @@ void dal_ddc_service_i2c_query_dp_dual_mode_adaptor(
DP_HDMI_DONGLE_ADDRESS,
type2_dongle_buf,
sizeof(type2_dongle_buf))) {
- *dongle = DISPLAY_DONGLE_DP_DVI_DONGLE;
- sink_cap->max_hdmi_pixel_clock = DP_ADAPTOR_DVI_MAX_TMDS_CLK;
+ /* Passive HDMI dongles can sometimes fail here without retrying*/
+ while (retry_count > 0) {
+ if (i2c_read(ddc,
+ DP_HDMI_DONGLE_ADDRESS,
+ type2_dongle_buf,
+ sizeof(type2_dongle_buf)))
+ break;
+ retry_count--;
+ }
+ if (retry_count == 0) {
+ *dongle = DISPLAY_DONGLE_DP_DVI_DONGLE;
+ sink_cap->max_hdmi_pixel_clock = DP_ADAPTOR_DVI_MAX_TMDS_CLK;
- CONN_DATA_DETECT(ddc->link, type2_dongle_buf, sizeof(type2_dongle_buf),
- "DP-DVI passive dongle %dMhz: ",
- DP_ADAPTOR_DVI_MAX_TMDS_CLK / 1000);
- return;
+ CONN_DATA_DETECT(ddc->link, type2_dongle_buf, sizeof(type2_dongle_buf),
+ "DP-DVI passive dongle %dMhz: ",
+ DP_ADAPTOR_DVI_MAX_TMDS_CLK / 1000);
+ return;
+ }
}
/* Check if Type 2 dongle.*/
--
2.20.1
From: Trond Myklebust <[email protected]>
[ Upstream commit 875f0706accd6501c3209bb99df8573171fb5d75 ]
If there are TCP back channel requests being processed by the
server threads, then we should hold a reference to the transport
to ensure it doesn't get freed from underneath us.
Reported-by: Neil Brown <[email protected]>
Fixes: 2ea24497a1b3 ("SUNRPC: RPC callbacks may be split across several..")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sunrpc/backchannel_rqst.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/net/sunrpc/backchannel_rqst.c b/net/sunrpc/backchannel_rqst.c
index 339e8c077c2db..7eb251372f947 100644
--- a/net/sunrpc/backchannel_rqst.c
+++ b/net/sunrpc/backchannel_rqst.c
@@ -307,8 +307,8 @@ void xprt_free_bc_rqst(struct rpc_rqst *req)
*/
dprintk("RPC: Last session removed req=%p\n", req);
xprt_free_allocation(req);
- return;
}
+ xprt_put(xprt);
}
/*
@@ -339,7 +339,7 @@ found:
spin_unlock(&xprt->bc_pa_lock);
if (new) {
if (req != new)
- xprt_free_bc_rqst(new);
+ xprt_free_allocation(new);
break;
} else if (req)
break;
@@ -368,6 +368,7 @@ void xprt_complete_bc_request(struct rpc_rqst *req, uint32_t copied)
set_bit(RPC_BC_PA_IN_USE, &req->rq_bc_pa_state);
dprintk("RPC: add callback request to list\n");
+ xprt_get(xprt);
spin_lock(&bc_serv->sv_cb_lock);
list_add(&req->rq_bc_list, &bc_serv->sv_cb_list);
wake_up(&bc_serv->sv_cb_waitq);
--
2.20.1
From: Ard Biesheuvel <[email protected]>
[ Upstream commit 41cd96fa149b29684ebd38759fefb07f9c7d5276 ]
The EFI stubloader for ARM starts out by allocating a 32 MB window
at the base of RAM, in order to ensure that the decompressor (which
blindly copies the uncompressed kernel into that window) does not
overwrite other allocations that are made while running in the context
of the EFI firmware.
In some cases, (e.g., U-Boot running on the Raspberry Pi 2), this is
causing boot failures because this initial allocation conflicts with
a page of reserved memory at the base of RAM that contains the SMP spin
tables and other pieces of firmware data and which was put there by
the bootloader under the assumption that the TEXT_OFFSET window right
below the kernel is only used partially during early boot, and will be
left alone once the memory reservations are processed and taken into
account.
So let's permit reserved memory regions to exist in the region starting
at the base of RAM, and ending at TEXT_OFFSET - 5 * PAGE_SIZE, which is
the window below the kernel that is not touched by the early boot code.
Tested-by: Guillaume Gardet <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Acked-by: Chester Lin <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/firmware/efi/libstub/Makefile | 1 +
drivers/firmware/efi/libstub/arm32-stub.c | 16 +++++++++++++---
2 files changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
index 0460c7581220e..ee0661ddb25bb 100644
--- a/drivers/firmware/efi/libstub/Makefile
+++ b/drivers/firmware/efi/libstub/Makefile
@@ -52,6 +52,7 @@ lib-$(CONFIG_EFI_ARMSTUB) += arm-stub.o fdt.o string.o random.o \
lib-$(CONFIG_ARM) += arm32-stub.o
lib-$(CONFIG_ARM64) += arm64-stub.o
+CFLAGS_arm32-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
CFLAGS_arm64-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
#
diff --git a/drivers/firmware/efi/libstub/arm32-stub.c b/drivers/firmware/efi/libstub/arm32-stub.c
index e8f7aefb6813d..ffa242ad0a82e 100644
--- a/drivers/firmware/efi/libstub/arm32-stub.c
+++ b/drivers/firmware/efi/libstub/arm32-stub.c
@@ -195,6 +195,7 @@ efi_status_t handle_kernel_image(efi_system_table_t *sys_table,
unsigned long dram_base,
efi_loaded_image_t *image)
{
+ unsigned long kernel_base;
efi_status_t status;
/*
@@ -204,9 +205,18 @@ efi_status_t handle_kernel_image(efi_system_table_t *sys_table,
* loaded. These assumptions are made by the decompressor,
* before any memory map is available.
*/
- dram_base = round_up(dram_base, SZ_128M);
+ kernel_base = round_up(dram_base, SZ_128M);
- status = reserve_kernel_base(sys_table, dram_base, reserve_addr,
+ /*
+ * Note that some platforms (notably, the Raspberry Pi 2) put
+ * spin-tables and other pieces of firmware at the base of RAM,
+ * abusing the fact that the window of TEXT_OFFSET bytes at the
+ * base of the kernel image is only partially used at the moment.
+ * (Up to 5 pages are used for the swapper page tables)
+ */
+ kernel_base += TEXT_OFFSET - 5 * PAGE_SIZE;
+
+ status = reserve_kernel_base(sys_table, kernel_base, reserve_addr,
reserve_size);
if (status != EFI_SUCCESS) {
pr_efi_err(sys_table, "Unable to allocate memory for uncompressed kernel.\n");
@@ -220,7 +230,7 @@ efi_status_t handle_kernel_image(efi_system_table_t *sys_table,
*image_size = image->image_size;
status = efi_relocate_kernel(sys_table, image_addr, *image_size,
*image_size,
- dram_base + MAX_UNCOMP_KERNEL_SIZE, 0);
+ kernel_base + MAX_UNCOMP_KERNEL_SIZE, 0);
if (status != EFI_SUCCESS) {
pr_efi_err(sys_table, "Failed to relocate kernel.\n");
efi_free(sys_table, *reserve_size, *reserve_addr);
--
2.20.1
From: Huacai Chen <[email protected]>
[ Upstream commit 52338415cf4d4064ae6b8dd972dadbda841da4fa ]
The update of the VDSO data is depending on __arch_use_vsyscall() returning
True. This is a leftover from the attempt to map the features of various
architectures 1:1 into generic code.
The usage of __arch_use_vsyscall() in the actual vsyscall implementations
got dropped and replaced by the requirement for the architecture code to
return U64_MAX if the global clocksource is not usable in the VDSO.
But the __arch_use_vsyscall() check in the update code stayed which causes
the VDSO data to be stale or invalid when an architecture actually
implements that function and returns False when the current clocksource is
not usable in the VDSO.
As a consequence the VDSO implementations of clock_getres(), time(),
clock_gettime(CLOCK_.*_COARSE) operate on invalid data and return bogus
information.
Remove the __arch_use_vsyscall() check from the VDSO update function and
update the VDSO data unconditionally.
[ tglx: Massaged changelog and removed the now useless implementations in
asm-generic/ARM64/MIPS ]
Fixes: 44f57d788e7deecb50 ("timekeeping: Provide a generic update_vsyscall() implementation")
Signed-off-by: Huacai Chen <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Vincenzo Frascino <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/include/asm/vdso/vsyscall.h | 7 -------
include/asm-generic/vdso/vsyscall.h | 7 -------
kernel/time/vsyscall.c | 9 +++------
3 files changed, 3 insertions(+), 20 deletions(-)
diff --git a/arch/arm64/include/asm/vdso/vsyscall.h b/arch/arm64/include/asm/vdso/vsyscall.h
index 0c731bfc7c8c7..0c20a7c1bee50 100644
--- a/arch/arm64/include/asm/vdso/vsyscall.h
+++ b/arch/arm64/include/asm/vdso/vsyscall.h
@@ -30,13 +30,6 @@ int __arm64_get_clock_mode(struct timekeeper *tk)
}
#define __arch_get_clock_mode __arm64_get_clock_mode
-static __always_inline
-int __arm64_use_vsyscall(struct vdso_data *vdata)
-{
- return !vdata[CS_HRES_COARSE].clock_mode;
-}
-#define __arch_use_vsyscall __arm64_use_vsyscall
-
static __always_inline
void __arm64_update_vsyscall(struct vdso_data *vdata, struct timekeeper *tk)
{
diff --git a/include/asm-generic/vdso/vsyscall.h b/include/asm-generic/vdso/vsyscall.h
index e94b19782c92f..ce41032086193 100644
--- a/include/asm-generic/vdso/vsyscall.h
+++ b/include/asm-generic/vdso/vsyscall.h
@@ -25,13 +25,6 @@ static __always_inline int __arch_get_clock_mode(struct timekeeper *tk)
}
#endif /* __arch_get_clock_mode */
-#ifndef __arch_use_vsyscall
-static __always_inline int __arch_use_vsyscall(struct vdso_data *vdata)
-{
- return 1;
-}
-#endif /* __arch_use_vsyscall */
-
#ifndef __arch_update_vsyscall
static __always_inline void __arch_update_vsyscall(struct vdso_data *vdata,
struct timekeeper *tk)
diff --git a/kernel/time/vsyscall.c b/kernel/time/vsyscall.c
index 4bc37ac3bb052..5ee0f77094107 100644
--- a/kernel/time/vsyscall.c
+++ b/kernel/time/vsyscall.c
@@ -110,8 +110,7 @@ void update_vsyscall(struct timekeeper *tk)
nsec = nsec + tk->wall_to_monotonic.tv_nsec;
vdso_ts->sec += __iter_div_u64_rem(nsec, NSEC_PER_SEC, &vdso_ts->nsec);
- if (__arch_use_vsyscall(vdata))
- update_vdso_data(vdata, tk);
+ update_vdso_data(vdata, tk);
__arch_update_vsyscall(vdata, tk);
@@ -124,10 +123,8 @@ void update_vsyscall_tz(void)
{
struct vdso_data *vdata = __arch_get_k_vdso_data();
- if (__arch_use_vsyscall(vdata)) {
- vdata[CS_HRES_COARSE].tz_minuteswest = sys_tz.tz_minuteswest;
- vdata[CS_HRES_COARSE].tz_dsttime = sys_tz.tz_dsttime;
- }
+ vdata[CS_HRES_COARSE].tz_minuteswest = sys_tz.tz_minuteswest;
+ vdata[CS_HRES_COARSE].tz_dsttime = sys_tz.tz_dsttime;
__arch_sync_vdso_data(vdata);
}
--
2.20.1
From: Jerry Snitselaar <[email protected]>
[ Upstream commit 2bb6a81633cb47dcba4c9f75605cbe49e6b73d60 ]
Currently nothing checks the return value of efi_tpm_eventlog_init(),
but in case that changes in the future make sure an error is
returned when it fails to determine the tpm final events log
size.
Suggested-by: Dan Carpenter <[email protected]>
Signed-off-by: Jerry Snitselaar <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Fixes: e658c82be556 ("efi/tpm: Only set 'efi_tpm_final_log_size' after ...")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/firmware/efi/tpm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/firmware/efi/tpm.c b/drivers/firmware/efi/tpm.c
index ebd7977653a8e..31f9f0e369b97 100644
--- a/drivers/firmware/efi/tpm.c
+++ b/drivers/firmware/efi/tpm.c
@@ -88,6 +88,7 @@ int __init efi_tpm_eventlog_init(void)
if (tbl_size < 0) {
pr_err(FW_BUG "Failed to parse event in TPM Final Events Log\n");
+ ret = -EINVAL;
goto out_calc;
}
--
2.20.1
From: Kairui Song <[email protected]>
[ Upstream commit 220dd7699c46d5940115bd797b01b2ab047c87b8 ]
Currently, kernel fails to boot on some HyperV VMs when using EFI.
And it's a potential issue on all x86 platforms.
It's caused by broken kernel relocation on EFI systems, when below three
conditions are met:
1. Kernel image is not loaded to the default address (LOAD_PHYSICAL_ADDR)
by the loader.
2. There isn't enough room to contain the kernel, starting from the
default load address (eg. something else occupied part the region).
3. In the memmap provided by EFI firmware, there is a memory region
starts below LOAD_PHYSICAL_ADDR, and suitable for containing the
kernel.
EFI stub will perform a kernel relocation when condition 1 is met. But
due to condition 2, EFI stub can't relocate kernel to the preferred
address, so it fallback to ask EFI firmware to alloc lowest usable memory
region, got the low region mentioned in condition 3, and relocated
kernel there.
It's incorrect to relocate the kernel below LOAD_PHYSICAL_ADDR. This
is the lowest acceptable kernel relocation address.
The first thing goes wrong is in arch/x86/boot/compressed/head_64.S.
Kernel decompression will force use LOAD_PHYSICAL_ADDR as the output
address if kernel is located below it. Then the relocation before
decompression, which move kernel to the end of the decompression buffer,
will overwrite other memory region, as there is no enough memory there.
To fix it, just don't let EFI stub relocate the kernel to any address
lower than lowest acceptable address.
[ ardb: introduce efi_low_alloc_above() to reduce the scope of the change ]
Signed-off-by: Kairui Song <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Acked-by: Jarkko Sakkinen <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/boot/compressed/eboot.c | 4 +++-
drivers/firmware/efi/libstub/arm32-stub.c | 2 +-
.../firmware/efi/libstub/efi-stub-helper.c | 24 ++++++++-----------
include/linux/efi.h | 18 ++++++++++++--
4 files changed, 30 insertions(+), 18 deletions(-)
diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index d6662fdef3001..82bc60c8acb24 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -13,6 +13,7 @@
#include <asm/e820/types.h>
#include <asm/setup.h>
#include <asm/desc.h>
+#include <asm/boot.h>
#include "../string.h"
#include "eboot.h"
@@ -813,7 +814,8 @@ efi_main(struct efi_config *c, struct boot_params *boot_params)
status = efi_relocate_kernel(sys_table, &bzimage_addr,
hdr->init_size, hdr->init_size,
hdr->pref_address,
- hdr->kernel_alignment);
+ hdr->kernel_alignment,
+ LOAD_PHYSICAL_ADDR);
if (status != EFI_SUCCESS) {
efi_printk(sys_table, "efi_relocate_kernel() failed!\n");
goto fail;
diff --git a/drivers/firmware/efi/libstub/arm32-stub.c b/drivers/firmware/efi/libstub/arm32-stub.c
index ffa242ad0a82e..41213bf5fcf5e 100644
--- a/drivers/firmware/efi/libstub/arm32-stub.c
+++ b/drivers/firmware/efi/libstub/arm32-stub.c
@@ -230,7 +230,7 @@ efi_status_t handle_kernel_image(efi_system_table_t *sys_table,
*image_size = image->image_size;
status = efi_relocate_kernel(sys_table, image_addr, *image_size,
*image_size,
- kernel_base + MAX_UNCOMP_KERNEL_SIZE, 0);
+ kernel_base + MAX_UNCOMP_KERNEL_SIZE, 0, 0);
if (status != EFI_SUCCESS) {
pr_efi_err(sys_table, "Failed to relocate kernel.\n");
efi_free(sys_table, *reserve_size, *reserve_addr);
diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c
index 3caae7f2cf567..35dbc2791c973 100644
--- a/drivers/firmware/efi/libstub/efi-stub-helper.c
+++ b/drivers/firmware/efi/libstub/efi-stub-helper.c
@@ -260,11 +260,11 @@ fail:
}
/*
- * Allocate at the lowest possible address.
+ * Allocate at the lowest possible address that is not below 'min'.
*/
-efi_status_t efi_low_alloc(efi_system_table_t *sys_table_arg,
- unsigned long size, unsigned long align,
- unsigned long *addr)
+efi_status_t efi_low_alloc_above(efi_system_table_t *sys_table_arg,
+ unsigned long size, unsigned long align,
+ unsigned long *addr, unsigned long min)
{
unsigned long map_size, desc_size, buff_size;
efi_memory_desc_t *map;
@@ -311,13 +311,8 @@ efi_status_t efi_low_alloc(efi_system_table_t *sys_table_arg,
start = desc->phys_addr;
end = start + desc->num_pages * EFI_PAGE_SIZE;
- /*
- * Don't allocate at 0x0. It will confuse code that
- * checks pointers against NULL. Skip the first 8
- * bytes so we start at a nice even number.
- */
- if (start == 0x0)
- start += 8;
+ if (start < min)
+ start = min;
start = round_up(start, align);
if ((start + size) > end)
@@ -698,7 +693,8 @@ efi_status_t efi_relocate_kernel(efi_system_table_t *sys_table_arg,
unsigned long image_size,
unsigned long alloc_size,
unsigned long preferred_addr,
- unsigned long alignment)
+ unsigned long alignment,
+ unsigned long min_addr)
{
unsigned long cur_image_addr;
unsigned long new_addr = 0;
@@ -731,8 +727,8 @@ efi_status_t efi_relocate_kernel(efi_system_table_t *sys_table_arg,
* possible.
*/
if (status != EFI_SUCCESS) {
- status = efi_low_alloc(sys_table_arg, alloc_size, alignment,
- &new_addr);
+ status = efi_low_alloc_above(sys_table_arg, alloc_size,
+ alignment, &new_addr, min_addr);
}
if (status != EFI_SUCCESS) {
pr_efi_err(sys_table_arg, "Failed to allocate usable memory for kernel.\n");
diff --git a/include/linux/efi.h b/include/linux/efi.h
index f87fabea4a859..b3a93f8e6e596 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -1585,9 +1585,22 @@ char *efi_convert_cmdline(efi_system_table_t *sys_table_arg,
efi_status_t efi_get_memory_map(efi_system_table_t *sys_table_arg,
struct efi_boot_memmap *map);
+efi_status_t efi_low_alloc_above(efi_system_table_t *sys_table_arg,
+ unsigned long size, unsigned long align,
+ unsigned long *addr, unsigned long min);
+
+static inline
efi_status_t efi_low_alloc(efi_system_table_t *sys_table_arg,
unsigned long size, unsigned long align,
- unsigned long *addr);
+ unsigned long *addr)
+{
+ /*
+ * Don't allocate at 0x0. It will confuse code that
+ * checks pointers against NULL. Skip the first 8
+ * bytes so we start at a nice even number.
+ */
+ return efi_low_alloc_above(sys_table_arg, size, align, addr, 0x8);
+}
efi_status_t efi_high_alloc(efi_system_table_t *sys_table_arg,
unsigned long size, unsigned long align,
@@ -1598,7 +1611,8 @@ efi_status_t efi_relocate_kernel(efi_system_table_t *sys_table_arg,
unsigned long image_size,
unsigned long alloc_size,
unsigned long preferred_addr,
- unsigned long alignment);
+ unsigned long alignment,
+ unsigned long min_addr);
efi_status_t handle_cmdline_files(efi_system_table_t *sys_table_arg,
efi_loaded_image_t *image,
--
2.20.1
From: Doug Berger <[email protected]>
[ Upstream commit bfc97f9f199cb041cf897af3af096540948cc705 ]
The Broadcom Brahma-B53 core is susceptible to the issue described by
ARM64_ERRATUM_845719 so this commit enables the workaround to be applied
when executing on that core.
Since there are now multiple entries to match, we must convert the
existing ARM64_ERRATUM_845719 into an erratum list.
Signed-off-by: Doug Berger <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
Documentation/arm64/silicon-errata.rst | 3 +++
arch/arm64/include/asm/cputype.h | 2 ++
arch/arm64/kernel/cpu_errata.c | 13 +++++++++++--
3 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
index 47feda6c15bcc..8c87c68dcc324 100644
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@@ -91,6 +91,9 @@ stable kernels.
| ARM | MMU-500 | #841119,826419 | N/A |
+----------------+-----------------+-----------------+-----------------------------+
+----------------+-----------------+-----------------+-----------------------------+
+| Broadcom | Brahma-B53 | N/A | ARM64_ERRATUM_845719 |
++----------------+-----------------+-----------------+-----------------------------+
++----------------+-----------------+-----------------+-----------------------------+
| Cavium | ThunderX ITS | #22375,24313 | CAVIUM_ERRATUM_22375 |
+----------------+-----------------+-----------------+-----------------------------+
| Cavium | ThunderX ITS | #23144 | CAVIUM_ERRATUM_23144 |
diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h
index b1454d117cd2c..aca07c2f6e6e3 100644
--- a/arch/arm64/include/asm/cputype.h
+++ b/arch/arm64/include/asm/cputype.h
@@ -79,6 +79,7 @@
#define CAVIUM_CPU_PART_THUNDERX_83XX 0x0A3
#define CAVIUM_CPU_PART_THUNDERX2 0x0AF
+#define BRCM_CPU_PART_BRAHMA_B53 0x100
#define BRCM_CPU_PART_VULCAN 0x516
#define QCOM_CPU_PART_FALKOR_V1 0x800
@@ -105,6 +106,7 @@
#define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX)
#define MIDR_THUNDERX_83XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_83XX)
#define MIDR_CAVIUM_THUNDERX2 MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX2)
+#define MIDR_BRAHMA_B53 MIDR_CPU_MODEL(ARM_CPU_IMP_BRCM, BRCM_CPU_PART_BRAHMA_B53)
#define MIDR_BRCM_VULCAN MIDR_CPU_MODEL(ARM_CPU_IMP_BRCM, BRCM_CPU_PART_VULCAN)
#define MIDR_QCOM_FALKOR_V1 MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR_V1)
#define MIDR_QCOM_FALKOR MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR)
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 4465be78ee466..d9da4201ba858 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -743,6 +743,16 @@ static const struct midr_range erratum_1418040_list[] = {
};
#endif
+#ifdef CONFIG_ARM64_ERRATUM_845719
+static const struct midr_range erratum_845719_list[] = {
+ /* Cortex-A53 r0p[01234] */
+ MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 4),
+ /* Brahma-B53 r0p[0] */
+ MIDR_REV(MIDR_BRAHMA_B53, 0, 0),
+ {},
+};
+#endif
+
const struct arm64_cpu_capabilities arm64_errata[] = {
#ifdef CONFIG_ARM64_WORKAROUND_CLEAN_CACHE
{
@@ -783,10 +793,9 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
#endif
#ifdef CONFIG_ARM64_ERRATUM_845719
{
- /* Cortex-A53 r0p[01234] */
.desc = "ARM erratum 845719",
.capability = ARM64_WORKAROUND_845719,
- ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 4),
+ ERRATA_MIDR_RANGE_LIST(erratum_845719_list),
},
#endif
#ifdef CONFIG_CAVIUM_ERRATUM_23154
--
2.20.1
From: Nicholas Piggin <[email protected]>
[ Upstream commit d3566abb1a1e7772116e4d50fb6a58d19c9802e5 ]
In shutdown/reboot paths, the timer is not stopped:
qla2x00_shutdown
pci_device_shutdown
device_shutdown
kernel_restart_prepare
kernel_restart
sys_reboot
This causes lockups (on powerpc) when firmware config space access calls
are interrupted by smp_send_stop later in reboot.
Fixes: e30d1756480dc ("[SCSI] qla2xxx: Addition of shutdown callback handler.")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nicholas Piggin <[email protected]>
Acked-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_os.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 04cf6986eb8e6..ac96771bb06df 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -3543,6 +3543,10 @@ qla2x00_shutdown(struct pci_dev *pdev)
qla2x00_try_to_stop_firmware(vha);
}
+ /* Disable timer */
+ if (vha->timer_active)
+ qla2x00_stop_timer(vha);
+
/* Turn adapter off line */
vha->flags.online = 0;
--
2.20.1
From: Andrey Grodzovsky <[email protected]>
[ Upstream commit 167bf96014a095753053595f3224fcdeb49ac3c8 ]
Problem:
When run_job fails and HW fence returned is NULL we still signal
the s_fence to avoid hangs but the user has no way of knowing if
the actual HW job was ran and finished.
Fix:
Allow .run_job implementations to return ERR_PTR in the fence pointer
returned and then set this error for s_fence->finished fence so whoever
wait on this fence can inspect the signaled fence for an error.
Signed-off-by: Andrey Grodzovsky <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/scheduler/sched_main.c | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/scheduler/sched_main.c b/drivers/gpu/drm/scheduler/sched_main.c
index c1058eece16b4..27e6449da24ad 100644
--- a/drivers/gpu/drm/scheduler/sched_main.c
+++ b/drivers/gpu/drm/scheduler/sched_main.c
@@ -478,6 +478,7 @@ void drm_sched_resubmit_jobs(struct drm_gpu_scheduler *sched)
struct drm_sched_job *s_job, *tmp;
uint64_t guilty_context;
bool found_guilty = false;
+ struct dma_fence *fence;
list_for_each_entry_safe(s_job, tmp, &sched->ring_mirror_list, node) {
struct drm_sched_fence *s_fence = s_job->s_fence;
@@ -491,7 +492,16 @@ void drm_sched_resubmit_jobs(struct drm_gpu_scheduler *sched)
dma_fence_set_error(&s_fence->finished, -ECANCELED);
dma_fence_put(s_job->s_fence->parent);
- s_job->s_fence->parent = sched->ops->run_job(s_job);
+ fence = sched->ops->run_job(s_job);
+
+ if (IS_ERR_OR_NULL(fence)) {
+ s_job->s_fence->parent = NULL;
+ dma_fence_set_error(&s_fence->finished, PTR_ERR(fence));
+ } else {
+ s_job->s_fence->parent = fence;
+ }
+
+
}
}
EXPORT_SYMBOL(drm_sched_resubmit_jobs);
@@ -719,7 +729,7 @@ static int drm_sched_main(void *param)
fence = sched->ops->run_job(sched_job);
drm_sched_fence_scheduled(s_fence);
- if (fence) {
+ if (!IS_ERR_OR_NULL(fence)) {
s_fence->parent = dma_fence_get(fence);
r = dma_fence_add_callback(fence, &sched_job->cb,
drm_sched_process_job);
@@ -729,8 +739,11 @@ static int drm_sched_main(void *param)
DRM_ERROR("fence add callback failed (%d)\n",
r);
dma_fence_put(fence);
- } else
+ } else {
+
+ dma_fence_set_error(&s_fence->finished, PTR_ERR(fence));
drm_sched_process_job(NULL, &sched_job->cb);
+ }
wake_up(&sched->job_scheduled);
}
--
2.20.1
From: Trond Myklebust <[email protected]>
[ Upstream commit be3df3dd4c70ee020587a943a31b98a0fb4b6424 ]
If the delegation is marked as being revoked, we must not use it
for cached opens.
Fixes: 869f9dfa4d6d ("NFSv4: Fix races between nfs_remove_bad_delegation() and delegation return")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfs/delegation.c | 10 ++++++++++
fs/nfs/delegation.h | 1 +
fs/nfs/nfs4proc.c | 7 ++-----
3 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index ad7a771014714..af549d70ec507 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c
@@ -53,6 +53,16 @@ nfs4_is_valid_delegation(const struct nfs_delegation *delegation,
return false;
}
+struct nfs_delegation *nfs4_get_valid_delegation(const struct inode *inode)
+{
+ struct nfs_delegation *delegation;
+
+ delegation = rcu_dereference(NFS_I(inode)->delegation);
+ if (nfs4_is_valid_delegation(delegation, 0))
+ return delegation;
+ return NULL;
+}
+
static int
nfs4_do_check_delegation(struct inode *inode, fmode_t flags, bool mark)
{
diff --git a/fs/nfs/delegation.h b/fs/nfs/delegation.h
index 9eb87ae4c9827..8b14d441e699b 100644
--- a/fs/nfs/delegation.h
+++ b/fs/nfs/delegation.h
@@ -68,6 +68,7 @@ int nfs4_lock_delegation_recall(struct file_lock *fl, struct nfs4_state *state,
bool nfs4_copy_delegation_stateid(struct inode *inode, fmode_t flags, nfs4_stateid *dst, const struct cred **cred);
bool nfs4_refresh_delegation_stateid(nfs4_stateid *dst, struct inode *inode);
+struct nfs_delegation *nfs4_get_valid_delegation(const struct inode *inode);
void nfs_mark_delegation_referenced(struct nfs_delegation *delegation);
int nfs4_have_delegation(struct inode *inode, fmode_t flags);
int nfs4_check_delegation(struct inode *inode, fmode_t flags);
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index e1e7d2724b971..e600f28b1ddb9 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -1435,8 +1435,6 @@ static int can_open_delegated(struct nfs_delegation *delegation, fmode_t fmode,
return 0;
if ((delegation->type & fmode) != fmode)
return 0;
- if (test_bit(NFS_DELEGATION_RETURNING, &delegation->flags))
- return 0;
switch (claim) {
case NFS4_OPEN_CLAIM_NULL:
case NFS4_OPEN_CLAIM_FH:
@@ -1805,7 +1803,6 @@ static void nfs4_return_incompatible_delegation(struct inode *inode, fmode_t fmo
static struct nfs4_state *nfs4_try_open_cached(struct nfs4_opendata *opendata)
{
struct nfs4_state *state = opendata->state;
- struct nfs_inode *nfsi = NFS_I(state->inode);
struct nfs_delegation *delegation;
int open_mode = opendata->o_arg.open_flags;
fmode_t fmode = opendata->o_arg.fmode;
@@ -1822,7 +1819,7 @@ static struct nfs4_state *nfs4_try_open_cached(struct nfs4_opendata *opendata)
}
spin_unlock(&state->owner->so_lock);
rcu_read_lock();
- delegation = rcu_dereference(nfsi->delegation);
+ delegation = nfs4_get_valid_delegation(state->inode);
if (!can_open_delegated(delegation, fmode, claim)) {
rcu_read_unlock();
break;
@@ -2366,7 +2363,7 @@ static void nfs4_open_prepare(struct rpc_task *task, void *calldata)
data->o_arg.open_flags, claim))
goto out_no_action;
rcu_read_lock();
- delegation = rcu_dereference(NFS_I(data->state->inode)->delegation);
+ delegation = nfs4_get_valid_delegation(data->state->inode);
if (can_open_delegated(delegation, data->o_arg.fmode, claim))
goto unlock_no_action;
rcu_read_unlock();
--
2.20.1
From: Yangchun Fu <[email protected]>
[ Upstream commit 9cfeeb576d49a7b5e643b8066ba64a55e8417c5d ]
Synces the DMA buffer properly in order for CPU and device to see
the most up-to-data data.
Signed-off-by: Yangchun Fu <[email protected]>
Reviewed-by: Catherine Sullivan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/google/gve/gve_rx.c | 2 ++
drivers/net/ethernet/google/gve/gve_tx.c | 24 ++++++++++++++++++++++--
2 files changed, 24 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/google/gve/gve_rx.c b/drivers/net/ethernet/google/gve/gve_rx.c
index 59564ac99d2a6..edec61dfc8687 100644
--- a/drivers/net/ethernet/google/gve/gve_rx.c
+++ b/drivers/net/ethernet/google/gve/gve_rx.c
@@ -289,6 +289,8 @@ static bool gve_rx(struct gve_rx_ring *rx, struct gve_rx_desc *rx_desc,
len = be16_to_cpu(rx_desc->len) - GVE_RX_PAD;
page_info = &rx->data.page_info[idx];
+ dma_sync_single_for_cpu(&priv->pdev->dev, rx->data.qpl->page_buses[idx],
+ PAGE_SIZE, DMA_FROM_DEVICE);
/* gvnic can only receive into registered segments. If the buffer
* can't be recycled, our only choice is to copy the data out of
diff --git a/drivers/net/ethernet/google/gve/gve_tx.c b/drivers/net/ethernet/google/gve/gve_tx.c
index 778b87b5a06c2..0a9a7ee2a8668 100644
--- a/drivers/net/ethernet/google/gve/gve_tx.c
+++ b/drivers/net/ethernet/google/gve/gve_tx.c
@@ -390,7 +390,21 @@ static void gve_tx_fill_seg_desc(union gve_tx_desc *seg_desc,
seg_desc->seg.seg_addr = cpu_to_be64(addr);
}
-static int gve_tx_add_skb(struct gve_tx_ring *tx, struct sk_buff *skb)
+static void gve_dma_sync_for_device(struct device *dev, dma_addr_t *page_buses,
+ u64 iov_offset, u64 iov_len)
+{
+ dma_addr_t dma;
+ u64 addr;
+
+ for (addr = iov_offset; addr < iov_offset + iov_len;
+ addr += PAGE_SIZE) {
+ dma = page_buses[addr / PAGE_SIZE];
+ dma_sync_single_for_device(dev, dma, PAGE_SIZE, DMA_TO_DEVICE);
+ }
+}
+
+static int gve_tx_add_skb(struct gve_tx_ring *tx, struct sk_buff *skb,
+ struct device *dev)
{
int pad_bytes, hlen, hdr_nfrags, payload_nfrags, l4_hdr_offset;
union gve_tx_desc *pkt_desc, *seg_desc;
@@ -432,6 +446,9 @@ static int gve_tx_add_skb(struct gve_tx_ring *tx, struct sk_buff *skb)
skb_copy_bits(skb, 0,
tx->tx_fifo.base + info->iov[hdr_nfrags - 1].iov_offset,
hlen);
+ gve_dma_sync_for_device(dev, tx->tx_fifo.qpl->page_buses,
+ info->iov[hdr_nfrags - 1].iov_offset,
+ info->iov[hdr_nfrags - 1].iov_len);
copy_offset = hlen;
for (i = payload_iov; i < payload_nfrags + payload_iov; i++) {
@@ -445,6 +462,9 @@ static int gve_tx_add_skb(struct gve_tx_ring *tx, struct sk_buff *skb)
skb_copy_bits(skb, copy_offset,
tx->tx_fifo.base + info->iov[i].iov_offset,
info->iov[i].iov_len);
+ gve_dma_sync_for_device(dev, tx->tx_fifo.qpl->page_buses,
+ info->iov[i].iov_offset,
+ info->iov[i].iov_len);
copy_offset += info->iov[i].iov_len;
}
@@ -473,7 +493,7 @@ netdev_tx_t gve_tx(struct sk_buff *skb, struct net_device *dev)
gve_tx_put_doorbell(priv, tx->q_resources, tx->req);
return NETDEV_TX_BUSY;
}
- nsegs = gve_tx_add_skb(tx, skb);
+ nsegs = gve_tx_add_skb(tx, skb, &priv->pdev->dev);
netdev_tx_sent_queue(tx->netdev_txq, skb->len);
skb_tx_timestamp(skb);
--
2.20.1
From: Daniel Borkmann <[email protected]>
[ Upstream commit cd7455f1013ef96d5cbf5c05d2b7c06f273810a6 ]
syzkaller managed to trigger the following crash:
[...]
BUG: unable to handle page fault for address: ffffc90001923030
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD aa551067 P4D aa551067 PUD aa552067 PMD a572b067 PTE 80000000a1173163
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 7982 Comm: syz-executor912 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:bpf_jit_binary_hdr include/linux/filter.h:787 [inline]
RIP: 0010:bpf_get_prog_addr_region kernel/bpf/core.c:531 [inline]
RIP: 0010:bpf_tree_comp kernel/bpf/core.c:600 [inline]
RIP: 0010:__lt_find include/linux/rbtree_latch.h:115 [inline]
RIP: 0010:latch_tree_find include/linux/rbtree_latch.h:208 [inline]
RIP: 0010:bpf_prog_kallsyms_find kernel/bpf/core.c:674 [inline]
RIP: 0010:is_bpf_text_address+0x184/0x3b0 kernel/bpf/core.c:709
[...]
Call Trace:
kernel_text_address kernel/extable.c:147 [inline]
__kernel_text_address+0x9a/0x110 kernel/extable.c:102
unwind_get_return_address+0x4c/0x90 arch/x86/kernel/unwind_frame.c:19
arch_stack_walk+0x98/0xe0 arch/x86/kernel/stacktrace.c:26
stack_trace_save+0xb6/0x150 kernel/stacktrace.c:123
save_stack mm/kasan/common.c:69 [inline]
set_track mm/kasan/common.c:77 [inline]
__kasan_kmalloc+0x11c/0x1b0 mm/kasan/common.c:510
kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:518
slab_post_alloc_hook mm/slab.h:584 [inline]
slab_alloc mm/slab.c:3319 [inline]
kmem_cache_alloc+0x1f5/0x2e0 mm/slab.c:3483
getname_flags+0xba/0x640 fs/namei.c:138
getname+0x19/0x20 fs/namei.c:209
do_sys_open+0x261/0x560 fs/open.c:1091
__do_sys_open fs/open.c:1115 [inline]
__se_sys_open fs/open.c:1110 [inline]
__x64_sys_open+0x87/0x90 fs/open.c:1110
do_syscall_64+0xf7/0x1c0 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
[...]
After further debugging it turns out that we walk kallsyms while in parallel
we tear down a BPF program which contains subprograms that have been JITed
though the program itself has not been fully exposed and is eventually bailing
out with error.
The bpf_prog_kallsyms_del_subprogs() in bpf_prog_load()'s error path removes
the symbols, however, bpf_prog_free() tears down the JIT memory too early via
scheduled work. Instead, it needs to properly respect RCU grace period as the
kallsyms walk for BPF is under RCU.
Fix it by refactoring __bpf_prog_put()'s tear down and reuse it in our error
path where we defer final destruction when we have subprogs in the program.
Fixes: 7d1982b4e335 ("bpf: fix panic in prog load calls cleanup")
Fixes: 1c2a088a6626 ("bpf: x64: add JIT support for multi-function programs")
Reported-by: [email protected]
Signed-off-by: Daniel Borkmann <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Tested-by: [email protected]
Link: https://lore.kernel.org/bpf/55f6367324c2d7e9583fa9ccf5385dcbba0d7a6e.1571752452.git.daniel@iogearbox.net
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/filter.h | 1 -
kernel/bpf/core.c | 2 +-
kernel/bpf/syscall.c | 31 ++++++++++++++++++++-----------
3 files changed, 21 insertions(+), 13 deletions(-)
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 92c6e31fb008e..38716f93825f4 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -1099,7 +1099,6 @@ static inline void bpf_get_prog_name(const struct bpf_prog *prog, char *sym)
#endif /* CONFIG_BPF_JIT */
-void bpf_prog_kallsyms_del_subprogs(struct bpf_prog *fp);
void bpf_prog_kallsyms_del_all(struct bpf_prog *fp);
#define BPF_ANC BIT(15)
diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index 66088a9e9b9e2..ef0e1e3e66f4a 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -502,7 +502,7 @@ int bpf_remove_insns(struct bpf_prog *prog, u32 off, u32 cnt)
return WARN_ON_ONCE(bpf_adj_branches(prog, off, off + cnt, off, false));
}
-void bpf_prog_kallsyms_del_subprogs(struct bpf_prog *fp)
+static void bpf_prog_kallsyms_del_subprogs(struct bpf_prog *fp)
{
int i;
diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index 272071e9112f3..af5c60b07463e 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -1322,18 +1322,26 @@ static void __bpf_prog_put_rcu(struct rcu_head *rcu)
bpf_prog_free(aux->prog);
}
+static void __bpf_prog_put_noref(struct bpf_prog *prog, bool deferred)
+{
+ bpf_prog_kallsyms_del_all(prog);
+ btf_put(prog->aux->btf);
+ kvfree(prog->aux->func_info);
+ bpf_prog_free_linfo(prog);
+
+ if (deferred)
+ call_rcu(&prog->aux->rcu, __bpf_prog_put_rcu);
+ else
+ __bpf_prog_put_rcu(&prog->aux->rcu);
+}
+
static void __bpf_prog_put(struct bpf_prog *prog, bool do_idr_lock)
{
if (atomic_dec_and_test(&prog->aux->refcnt)) {
perf_event_bpf_event(prog, PERF_BPF_EVENT_PROG_UNLOAD, 0);
/* bpf_prog_free_id() must be called first */
bpf_prog_free_id(prog, do_idr_lock);
- bpf_prog_kallsyms_del_all(prog);
- btf_put(prog->aux->btf);
- kvfree(prog->aux->func_info);
- bpf_prog_free_linfo(prog);
-
- call_rcu(&prog->aux->rcu, __bpf_prog_put_rcu);
+ __bpf_prog_put_noref(prog, true);
}
}
@@ -1730,11 +1738,12 @@ static int bpf_prog_load(union bpf_attr *attr, union bpf_attr __user *uattr)
return err;
free_used_maps:
- bpf_prog_free_linfo(prog);
- kvfree(prog->aux->func_info);
- btf_put(prog->aux->btf);
- bpf_prog_kallsyms_del_subprogs(prog);
- free_used_maps(prog->aux);
+ /* In case we have subprogs, we need to wait for a grace
+ * period before we can tear down JIT memory since symbols
+ * are already exposed under kallsyms.
+ */
+ __bpf_prog_put_noref(prog, prog->aux->func_cnt);
+ return err;
free_prog:
bpf_prog_uncharge_memlock(prog);
free_prog_sec:
--
2.20.1
From: Shuning Zhang <[email protected]>
[ Upstream commit e74540b285569d2b1e14fe7aee92297078f235ce ]
When the extent tree is modified, it should be protected by inode
cluster lock and ip_alloc_sem.
The extent tree is accessed and modified in the
ocfs2_prepare_inode_for_write, but isn't protected by ip_alloc_sem.
The following is a case. The function ocfs2_fiemap is accessing the
extent tree, which is modified at the same time.
kernel BUG at fs/ocfs2/extent_map.c:475!
invalid opcode: 0000 [#1] SMP
Modules linked in: tun ocfs2 ocfs2_nodemanager configfs ocfs2_stackglue [...]
CPU: 16 PID: 14047 Comm: o2info Not tainted 4.1.12-124.23.1.el6uek.x86_64 #2
Hardware name: Oracle Corporation ORACLE SERVER X7-2L/ASM, MB MECH, X7-2L, BIOS 42040600 10/19/2018
task: ffff88019487e200 ti: ffff88003daa4000 task.ti: ffff88003daa4000
RIP: ocfs2_get_clusters_nocache.isra.11+0x390/0x550 [ocfs2]
Call Trace:
ocfs2_fiemap+0x1e3/0x430 [ocfs2]
do_vfs_ioctl+0x155/0x510
SyS_ioctl+0x81/0xa0
system_call_fastpath+0x18/0xd8
Code: 18 48 c7 c6 60 7f 65 a0 31 c0 bb e2 ff ff ff 48 8b 4a 40 48 8b 7a 28 48 c7 c2 78 2d 66 a0 e8 38 4f 05 00 e9 28 fe ff ff 0f 1f 00 <0f> 0b 66 0f 1f 44 00 00 bb 86 ff ff ff e9 13 fe ff ff 66 0f 1f
RIP ocfs2_get_clusters_nocache.isra.11+0x390/0x550 [ocfs2]
---[ end trace c8aa0c8180e869dc ]---
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled
This issue can be reproduced every week in a production environment.
This issue is related to the usage mode. If others use ocfs2 in this
mode, the kernel will panic frequently.
[[email protected]: coding style fixes]
[Fix new warning due to unused function by removing said function - Linus ]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Shuning Zhang <[email protected]>
Reviewed-by: Junxiao Bi <[email protected]>
Reviewed-by: Gang He <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Changwei Ge <[email protected]>
Cc: Jun Piao <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/ocfs2/file.c | 134 ++++++++++++++++++++++++++++++++----------------
1 file changed, 90 insertions(+), 44 deletions(-)
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 4435df3e5adb9..f6d790b7f2e2e 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -2092,54 +2092,90 @@ static int ocfs2_is_io_unaligned(struct inode *inode, size_t count, loff_t pos)
return 0;
}
-static int ocfs2_prepare_inode_for_refcount(struct inode *inode,
- struct file *file,
- loff_t pos, size_t count,
- int *meta_level)
+static int ocfs2_inode_lock_for_extent_tree(struct inode *inode,
+ struct buffer_head **di_bh,
+ int meta_level,
+ int overwrite_io,
+ int write_sem,
+ int wait)
{
- int ret;
- struct buffer_head *di_bh = NULL;
- u32 cpos = pos >> OCFS2_SB(inode->i_sb)->s_clustersize_bits;
- u32 clusters =
- ocfs2_clusters_for_bytes(inode->i_sb, pos + count) - cpos;
+ int ret = 0;
- ret = ocfs2_inode_lock(inode, &di_bh, 1);
- if (ret) {
- mlog_errno(ret);
+ if (wait)
+ ret = ocfs2_inode_lock(inode, NULL, meta_level);
+ else
+ ret = ocfs2_try_inode_lock(inode,
+ overwrite_io ? NULL : di_bh, meta_level);
+ if (ret < 0)
goto out;
+
+ if (wait) {
+ if (write_sem)
+ down_write(&OCFS2_I(inode)->ip_alloc_sem);
+ else
+ down_read(&OCFS2_I(inode)->ip_alloc_sem);
+ } else {
+ if (write_sem)
+ ret = down_write_trylock(&OCFS2_I(inode)->ip_alloc_sem);
+ else
+ ret = down_read_trylock(&OCFS2_I(inode)->ip_alloc_sem);
+
+ if (!ret) {
+ ret = -EAGAIN;
+ goto out_unlock;
+ }
}
- *meta_level = 1;
+ return ret;
- ret = ocfs2_refcount_cow(inode, di_bh, cpos, clusters, UINT_MAX);
- if (ret)
- mlog_errno(ret);
+out_unlock:
+ brelse(*di_bh);
+ ocfs2_inode_unlock(inode, meta_level);
out:
- brelse(di_bh);
return ret;
}
+static void ocfs2_inode_unlock_for_extent_tree(struct inode *inode,
+ struct buffer_head **di_bh,
+ int meta_level,
+ int write_sem)
+{
+ if (write_sem)
+ up_write(&OCFS2_I(inode)->ip_alloc_sem);
+ else
+ up_read(&OCFS2_I(inode)->ip_alloc_sem);
+
+ brelse(*di_bh);
+ *di_bh = NULL;
+
+ if (meta_level >= 0)
+ ocfs2_inode_unlock(inode, meta_level);
+}
+
static int ocfs2_prepare_inode_for_write(struct file *file,
loff_t pos, size_t count, int wait)
{
int ret = 0, meta_level = 0, overwrite_io = 0;
+ int write_sem = 0;
struct dentry *dentry = file->f_path.dentry;
struct inode *inode = d_inode(dentry);
struct buffer_head *di_bh = NULL;
loff_t end;
+ u32 cpos;
+ u32 clusters;
/*
* We start with a read level meta lock and only jump to an ex
* if we need to make modifications here.
*/
for(;;) {
- if (wait)
- ret = ocfs2_inode_lock(inode, NULL, meta_level);
- else
- ret = ocfs2_try_inode_lock(inode,
- overwrite_io ? NULL : &di_bh, meta_level);
+ ret = ocfs2_inode_lock_for_extent_tree(inode,
+ &di_bh,
+ meta_level,
+ overwrite_io,
+ write_sem,
+ wait);
if (ret < 0) {
- meta_level = -1;
if (ret != -EAGAIN)
mlog_errno(ret);
goto out;
@@ -2151,15 +2187,8 @@ static int ocfs2_prepare_inode_for_write(struct file *file,
*/
if (!wait && !overwrite_io) {
overwrite_io = 1;
- if (!down_read_trylock(&OCFS2_I(inode)->ip_alloc_sem)) {
- ret = -EAGAIN;
- goto out_unlock;
- }
ret = ocfs2_overwrite_io(inode, di_bh, pos, count);
- brelse(di_bh);
- di_bh = NULL;
- up_read(&OCFS2_I(inode)->ip_alloc_sem);
if (ret < 0) {
if (ret != -EAGAIN)
mlog_errno(ret);
@@ -2178,7 +2207,10 @@ static int ocfs2_prepare_inode_for_write(struct file *file,
* set inode->i_size at the end of a write. */
if (should_remove_suid(dentry)) {
if (meta_level == 0) {
- ocfs2_inode_unlock(inode, meta_level);
+ ocfs2_inode_unlock_for_extent_tree(inode,
+ &di_bh,
+ meta_level,
+ write_sem);
meta_level = 1;
continue;
}
@@ -2194,18 +2226,32 @@ static int ocfs2_prepare_inode_for_write(struct file *file,
ret = ocfs2_check_range_for_refcount(inode, pos, count);
if (ret == 1) {
- ocfs2_inode_unlock(inode, meta_level);
- meta_level = -1;
-
- ret = ocfs2_prepare_inode_for_refcount(inode,
- file,
- pos,
- count,
- &meta_level);
+ ocfs2_inode_unlock_for_extent_tree(inode,
+ &di_bh,
+ meta_level,
+ write_sem);
+ ret = ocfs2_inode_lock_for_extent_tree(inode,
+ &di_bh,
+ meta_level,
+ overwrite_io,
+ 1,
+ wait);
+ write_sem = 1;
+ if (ret < 0) {
+ if (ret != -EAGAIN)
+ mlog_errno(ret);
+ goto out;
+ }
+
+ cpos = pos >> OCFS2_SB(inode->i_sb)->s_clustersize_bits;
+ clusters =
+ ocfs2_clusters_for_bytes(inode->i_sb, pos + count) - cpos;
+ ret = ocfs2_refcount_cow(inode, di_bh, cpos, clusters, UINT_MAX);
}
if (ret < 0) {
- mlog_errno(ret);
+ if (ret != -EAGAIN)
+ mlog_errno(ret);
goto out_unlock;
}
@@ -2216,10 +2262,10 @@ out_unlock:
trace_ocfs2_prepare_inode_for_write(OCFS2_I(inode)->ip_blkno,
pos, count, wait);
- brelse(di_bh);
-
- if (meta_level >= 0)
- ocfs2_inode_unlock(inode, meta_level);
+ ocfs2_inode_unlock_for_extent_tree(inode,
+ &di_bh,
+ meta_level,
+ write_sem);
out:
return ret;
--
2.20.1
From: Kan Liang <[email protected]>
[ Upstream commit 75be6f703a141b048590d659a3954c4fedd30bba ]
The events in the same group don't start or stop simultaneously.
Here is the ftrace when enabling event group for uncore_iio_0:
# perf stat -e "{uncore_iio_0/event=0x1/,uncore_iio_0/event=0xe/}"
<idle>-0 [000] d.h. 8959.064832: read_msr: a41, value
b2b0b030 //Read counter reg of IIO unit0 counter0
<idle>-0 [000] d.h. 8959.064835: write_msr: a48, value
400001 //Write Ctrl reg of IIO unit0 counter0 to enable
counter0. <------ Although counter0 is enabled, Unit Ctrl is still
freezed. Nothing will count. We are still good here.
<idle>-0 [000] d.h. 8959.064836: read_msr: a40, value
30100 //Read Unit Ctrl reg of IIO unit0
<idle>-0 [000] d.h. 8959.064838: write_msr: a40, value
30000 //Write Unit Ctrl reg of IIO unit0 to enable all
counters in the unit by clear Freeze bit <------Unit0 is un-freezed.
Counter0 has been enabled. Now it starts counting. But counter1 has not
been enabled yet. The issue starts here.
<idle>-0 [000] d.h. 8959.064846: read_msr: a42, value 0
//Read counter reg of IIO unit0 counter1
<idle>-0 [000] d.h. 8959.064847: write_msr: a49, value
40000e //Write Ctrl reg of IIO unit0 counter1 to enable
counter1. <------ Now, counter1 just starts to count. Counter0 has
been running for a while.
Current code un-freezes the Unit Ctrl right after the first counter is
enabled. The subsequent group events always loses some counter values.
Implement pmu_enable and pmu_disable support for uncore, which can help
to batch hardware accesses.
No one uses uncore_enable_box and uncore_disable_box. Remove them.
Signed-off-by: Kan Liang <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vince Weaver <[email protected]>
Cc: [email protected]
Cc: [email protected]
Fixes: 087bfbb03269 ("perf/x86: Add generic Intel uncore PMU support")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/events/intel/uncore.c | 44 +++++++++++++++++++++++++++++-----
arch/x86/events/intel/uncore.h | 12 ----------
2 files changed, 38 insertions(+), 18 deletions(-)
diff --git a/arch/x86/events/intel/uncore.c b/arch/x86/events/intel/uncore.c
index 3694a5d0703d9..f7b191d3c9b01 100644
--- a/arch/x86/events/intel/uncore.c
+++ b/arch/x86/events/intel/uncore.c
@@ -502,10 +502,8 @@ void uncore_pmu_event_start(struct perf_event *event, int flags)
local64_set(&event->hw.prev_count, uncore_read_counter(box, event));
uncore_enable_event(box, event);
- if (box->n_active == 1) {
- uncore_enable_box(box);
+ if (box->n_active == 1)
uncore_pmu_start_hrtimer(box);
- }
}
void uncore_pmu_event_stop(struct perf_event *event, int flags)
@@ -529,10 +527,8 @@ void uncore_pmu_event_stop(struct perf_event *event, int flags)
WARN_ON_ONCE(hwc->state & PERF_HES_STOPPED);
hwc->state |= PERF_HES_STOPPED;
- if (box->n_active == 0) {
- uncore_disable_box(box);
+ if (box->n_active == 0)
uncore_pmu_cancel_hrtimer(box);
- }
}
if ((flags & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) {
@@ -778,6 +774,40 @@ static int uncore_pmu_event_init(struct perf_event *event)
return ret;
}
+static void uncore_pmu_enable(struct pmu *pmu)
+{
+ struct intel_uncore_pmu *uncore_pmu;
+ struct intel_uncore_box *box;
+
+ uncore_pmu = container_of(pmu, struct intel_uncore_pmu, pmu);
+ if (!uncore_pmu)
+ return;
+
+ box = uncore_pmu_to_box(uncore_pmu, smp_processor_id());
+ if (!box)
+ return;
+
+ if (uncore_pmu->type->ops->enable_box)
+ uncore_pmu->type->ops->enable_box(box);
+}
+
+static void uncore_pmu_disable(struct pmu *pmu)
+{
+ struct intel_uncore_pmu *uncore_pmu;
+ struct intel_uncore_box *box;
+
+ uncore_pmu = container_of(pmu, struct intel_uncore_pmu, pmu);
+ if (!uncore_pmu)
+ return;
+
+ box = uncore_pmu_to_box(uncore_pmu, smp_processor_id());
+ if (!box)
+ return;
+
+ if (uncore_pmu->type->ops->disable_box)
+ uncore_pmu->type->ops->disable_box(box);
+}
+
static ssize_t uncore_get_attr_cpumask(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -803,6 +833,8 @@ static int uncore_pmu_register(struct intel_uncore_pmu *pmu)
pmu->pmu = (struct pmu) {
.attr_groups = pmu->type->attr_groups,
.task_ctx_nr = perf_invalid_context,
+ .pmu_enable = uncore_pmu_enable,
+ .pmu_disable = uncore_pmu_disable,
.event_init = uncore_pmu_event_init,
.add = uncore_pmu_event_add,
.del = uncore_pmu_event_del,
diff --git a/arch/x86/events/intel/uncore.h b/arch/x86/events/intel/uncore.h
index f36f7bebbc1bb..bbfdaa720b456 100644
--- a/arch/x86/events/intel/uncore.h
+++ b/arch/x86/events/intel/uncore.h
@@ -441,18 +441,6 @@ static inline int uncore_freerunning_hw_config(struct intel_uncore_box *box,
return -EINVAL;
}
-static inline void uncore_disable_box(struct intel_uncore_box *box)
-{
- if (box->pmu->type->ops->disable_box)
- box->pmu->type->ops->disable_box(box);
-}
-
-static inline void uncore_enable_box(struct intel_uncore_box *box)
-{
- if (box->pmu->type->ops->enable_box)
- box->pmu->type->ops->enable_box(box);
-}
-
static inline void uncore_disable_event(struct intel_uncore_box *box,
struct perf_event *event)
{
--
2.20.1
From: Navid Emamdoost <[email protected]>
[ Upstream commit 9bbfceea12a8f145097a27d7c7267af25893c060 ]
In dwc3_pci_probe a call to platform_device_alloc allocates a device
which is correctly put in case of error except one case: when the call to
platform_device_add_properties fails it directly returns instead of
going to error handling. This commit replaces return with the goto.
Fixes: 1a7b12f69a94 ("usb: dwc3: pci: Supply device properties via driver data")
Signed-off-by: Navid Emamdoost <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/dwc3/dwc3-pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 5e8e18222f922..023f0357efd77 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -258,7 +258,7 @@ static int dwc3_pci_probe(struct pci_dev *pci, const struct pci_device_id *id)
ret = platform_device_add_properties(dwc->dwc3, p);
if (ret < 0)
- return ret;
+ goto err;
ret = dwc3_pci_quirks(dwc);
if (ret)
--
2.20.1
From: Nikhil Badola <[email protected]>
[ Upstream commit bc1e3a2dd0c9954fd956ac43ca2876bbea018c01 ]
Check memory resource existence before releasing it to avoid NULL
pointer dereference
Signed-off-by: Nikhil Badola <[email protected]>
Reviewed-by: Ran Wang <[email protected]>
Reviewed-by: Peter Chen <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/udc/fsl_udc_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c
index 20141c3096f68..9a05863b28768 100644
--- a/drivers/usb/gadget/udc/fsl_udc_core.c
+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
@@ -2576,7 +2576,7 @@ static int fsl_udc_remove(struct platform_device *pdev)
dma_pool_destroy(udc_controller->td_pool);
free_irq(udc_controller->irq, udc_controller);
iounmap(dr_regs);
- if (pdata->operating_mode == FSL_USB2_DR_DEVICE)
+ if (res && (pdata->operating_mode == FSL_USB2_DR_DEVICE))
release_mem_region(res->start, resource_size(res));
/* free udc --wait for the release() finished */
--
2.20.1
From: Cristian Birsan <[email protected]>
[ Upstream commit ba3a1a915c49cc3023e4ddfc88f21e7514e82aa4 ]
Fix interrupt storm generated by endpoints when working in FIFO mode.
The TX_COMPLETE interrupt is used only by control endpoints processing.
Do not enable it for other types of endpoints.
Fixes: 914a3f3b3754 ("USB: add atmel_usba_udc driver")
Signed-off-by: Cristian Birsan <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/udc/atmel_usba_udc.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 503d275bc4c4b..761e8a8088573 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -448,9 +448,11 @@ static void submit_request(struct usba_ep *ep, struct usba_request *req)
next_fifo_transaction(ep, req);
if (req->last_transaction) {
usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
- usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
+ if (ep_is_control(ep))
+ usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
} else {
- usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
+ if (ep_is_control(ep))
+ usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
}
}
--
2.20.1
From: Konstantin Khlebnikov <[email protected]>
commit c3aab9a0bd91b696a852169479b7db1ece6cbf8c upstream.
Functions like filemap_write_and_wait_range() should do nothing if inode
has no dirty pages or pages currently under writeback. But they anyway
construct struct writeback_control and this does some atomic operations if
CONFIG_CGROUP_WRITEBACK=y - on fast path it locks inode->i_lock and
updates state of writeback ownership, on slow path might be more work.
Current this path is safely avoided only when inode mapping has no pages.
For example generic_file_read_iter() calls filemap_write_and_wait_range()
at each O_DIRECT read - pretty hot path.
This patch skips starting new writeback if mapping has no dirty tags set.
If writeback is already in progress filemap_write_and_wait_range() will
wait for it.
Link: http://lkml.kernel.org/r/156378816804.1087.8607636317907921438.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Johannes Weiner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/filemap.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -408,7 +408,8 @@ int __filemap_fdatawrite_range(struct ad
.range_end = end,
};
- if (!mapping_cap_writeback_dirty(mapping))
+ if (!mapping_cap_writeback_dirty(mapping) ||
+ !mapping_tagged(mapping, PAGECACHE_TAG_DIRTY))
return 0;
wbc_attach_fdatawrite_inode(&wbc, mapping->host);
From: Tejun Heo <[email protected]>
commit 65de03e251382306a4575b1779c57c87889eee49 upstream.
cgroup writeback tries to refresh the associated wb immediately if the
current wb is dead. This is to avoid keeping issuing IOs on the stale
wb after memcg - blkcg association has changed (ie. when blkcg got
disabled / enabled higher up in the hierarchy).
Unfortunately, the logic gets triggered spuriously on inodes which are
associated with dead cgroups. When the logic is triggered on dead
cgroups, the attempt fails only after doing quite a bit of work
allocating and initializing a new wb.
While c3aab9a0bd91 ("mm/filemap.c: don't initiate writeback if mapping
has no dirty pages") alleviated the issue significantly as it now only
triggers when the inode has dirty pages. However, the condition can
still be triggered before the inode is switched to a different cgroup
and the logic simply doesn't make sense.
Skip the immediate switching if the associated memcg is dying.
This is a simplified version of the following two patches:
* https://lore.kernel.org/linux-mm/20190513183053.GA73423@dennisz-mbp/
* http://lkml.kernel.org/r/156355839560.2063.5265687291430814589.stgit@buzz
Cc: Konstantin Khlebnikov <[email protected]>
Fixes: e8a7abf5a5bd ("writeback: disassociate inodes from dying bdi_writebacks")
Acked-by: Dennis Zhou <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/fs-writeback.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -577,10 +577,13 @@ void wbc_attach_and_unlock_inode(struct
spin_unlock(&inode->i_lock);
/*
- * A dying wb indicates that the memcg-blkcg mapping has changed
- * and a new wb is already serving the memcg. Switch immediately.
+ * A dying wb indicates that either the blkcg associated with the
+ * memcg changed or the associated memcg is dying. In the first
+ * case, a replacement wb should already be available and we should
+ * refresh the wb immediately. In the second case, trying to
+ * refresh will keep failing.
*/
- if (unlikely(wb_dying(wbc->wb)))
+ if (unlikely(wb_dying(wbc->wb) && !css_is_dying(wbc->wb->memcg_css)))
inode_switch_wbs(inode, wbc->wb_id);
}
EXPORT_SYMBOL_GPL(wbc_attach_and_unlock_inode);
From: Xiang Chen <[email protected]>
[ Upstream commit 0cf9f4e547cebb5f5d2d046437c71ddcc8ea4a39 ]
Variable dif in function sd_setup_read_write_cmnd() is the return value of
function scsi_host_dif_capable() which returns dif capability of disks. If
define it as bool, even for the disks which support DIF3, the function
still return dif=1, which causes IO error. So define variable dif as
unsigned int instead of bool.
Fixes: e249e42d277e ("scsi: sd: Clean up sd_setup_read_write_cmnd()")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Xiang Chen <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/sd.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 2d77f32e13d5e..9dc367e2e742d 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1166,11 +1166,12 @@ static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
sector_t lba = sectors_to_logical(sdp, blk_rq_pos(rq));
sector_t threshold;
unsigned int nr_blocks = sectors_to_logical(sdp, blk_rq_sectors(rq));
- bool dif, dix;
unsigned int mask = logical_to_sectors(sdp, 1) - 1;
bool write = rq_data_dir(rq) == WRITE;
unsigned char protect, fua;
blk_status_t ret;
+ unsigned int dif;
+ bool dix;
ret = scsi_init_io(cmd);
if (ret != BLK_STS_OK)
--
2.20.1
From: Avri Altman <[email protected]>
[ Upstream commit 74e5e468b664d3739b2872d54764af97ac38e795 ]
The scsi async probe process is calling blk_pm_runtime_init for each lun,
and then those request queues are monitored by the block layer pm
engine (blk-pm.c). This is however, not the case for scsi-passthrough
queues, created by bsg_setup_queue().
So the ufs-bsg driver might send various commands, disregarding the pm
status of the device. This is wrong, regardless if its request queue is
pm-aware or not.
Fixes: df032bf27a41 (scsi: ufs: Add a bsg endpoint that supports UPIUs)
Link: https://lore.kernel.org/r/[email protected]
Reported-by: Yuliy Izrailov <[email protected]>
Signed-off-by: Avri Altman <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ufs/ufs_bsg.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/scsi/ufs/ufs_bsg.c b/drivers/scsi/ufs/ufs_bsg.c
index a9344eb4e047f..dc2f6d2b46edc 100644
--- a/drivers/scsi/ufs/ufs_bsg.c
+++ b/drivers/scsi/ufs/ufs_bsg.c
@@ -98,6 +98,8 @@ static int ufs_bsg_request(struct bsg_job *job)
bsg_reply->reply_payload_rcv_len = 0;
+ pm_runtime_get_sync(hba->dev);
+
msgcode = bsg_request->msgcode;
switch (msgcode) {
case UPIU_TRANSACTION_QUERY_REQ:
@@ -135,6 +137,8 @@ static int ufs_bsg_request(struct bsg_job *job)
break;
}
+ pm_runtime_put_sync(hba->dev);
+
if (!desc_buff)
goto out;
--
2.20.1
From: Peter Chen <[email protected]>
[ Upstream commit 1a1c851bbd706ea9f3a9756c2d3db28523506d3b ]
We meet several NULL pointer issues if configfs_composite_unbind
and composite_setup (or composite_disconnect) are running together.
These issues occur when do the function switch stress test, the
configfs_compsoite_unbind is called from user mode by
echo "" to /sys/../UDC entry, and meanwhile, the setup interrupt
or disconnect interrupt occurs by hardware. The composite_setup
will get the cdev from get_gadget_data, but configfs_composite_unbind
will set gadget data as NULL, so the NULL pointer issue occurs.
This concurrent is hard to reproduce by native kernel, but can be
reproduced by android kernel.
In this commit, we introduce one spinlock belongs to structure
gadget_info since we can't use the same spinlock in usb_composite_dev
due to exclusive running together between composite_setup and
configfs_composite_unbind. And one bit flag 'unbind' to indicate the
code is at unbind routine, this bit is needed due to we release the
lock at during configfs_composite_unbind sometimes, and composite_setup
may be run at that time.
Several oops:
oops 1:
android_work: sent uevent USB_STATE=CONNECTED
configfs-gadget gadget: super-speed config #1: b
android_work: sent uevent USB_STATE=CONFIGURED
init: Received control message 'start' for 'adbd' from pid: 3515 (system_server)
Unable to handle kernel NULL pointer dereference at virtual address 0000002a
init: Received control message 'stop' for 'adbd' from pid: 3375 (/vendor/bin/hw/[email protected])
Mem abort info:
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgd = ffff8008f1b7f000
[000000000000002a] *pgd=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 4 PID: 2457 Comm: irq/125-5b11000 Not tainted 4.14.98-07846-g0b40a9b-dirty #16
Hardware name: Freescale i.MX8QM MEK (DT)
task: ffff8008f2a98000 task.stack: ffff00000b7b8000
PC is at composite_setup+0x44/0x1508
LR is at android_setup+0xb8/0x13c
pc : [<ffff0000089ffb3c>] lr : [<ffff000008a032fc>] pstate: 800001c5
sp : ffff00000b7bbb80
x29: ffff00000b7bbb80 x28: ffff8008f2a3c010
x27: 0000000000000001 x26: 0000000000000000 [1232/1897]
audit: audit_lost=25791 audit_rate_limit=5 audit_backlog_limit=64
x25: 00000000ffffffa1 x24: ffff8008f2a3c010
audit: rate limit exceeded
x23: 0000000000000409 x22: ffff000009c8e000
x21: ffff8008f7a8b428 x20: ffff00000afae000
x19: ffff0000089ff000 x18: 0000000000000000
x17: 0000000000000000 x16: ffff0000082b7c9c
x15: 0000000000000000 x14: f1866f5b952aca46
x13: e35502e30d44349c x12: 0000000000000008
x11: 0000000000000008 x10: 0000000000000a30
x9 : ffff00000b7bbd00 x8 : ffff8008f2a98a90
x7 : ffff8008f27a9c90 x6 : 0000000000000001
x5 : 0000000000000000 x4 : 0000000000000001
x3 : 0000000000000000 x2 : 0000000000000006
x1 : ffff0000089ff8d0 x0 : 732a010310b9ed00
X7: 0xffff8008f27a9c10:
9c10 00000002 00000000 00000001 00000000 13110000 ffff0000 00000002 00208040
9c30 00000000 00000000 00000000 00000000 00000000 00000005 00000029 00000000
9c50 00051778 00000001 f27a8e00 ffff8008 00000005 00000000 00000078 00000078
9c70 00000078 00000000 09031d48 ffff0000 00100000 00000000 00400000 00000000
9c90 00000001 00000000 00000000 00000000 00000000 00000000 ffefb1a0 ffff8008
9cb0 f27a9ca8 ffff8008 00000000 00000000 b9d88037 00000173 1618a3eb 00000001
9cd0 870a792a 0000002e 16188fe6 00000001 0000242b 00000000 00000000 00000000
using random self ethernet address
9cf0 019a4646 00000000 000547f3 00000000 ecfd6c33 00000002 00000000
using random host ethernet address
00000000
X8: 0xffff8008f2a98a10:
8a10 00000000 00000000 f7788d00 ffff8008 00000001 00000000 00000000 00000000
8a30 eb218000 ffff8008 f2a98000 ffff8008 f2a98000 ffff8008 09885000 ffff0000
8a50 f34df480 ffff8008 00000000 00000000 f2a98648 ffff8008 09c8e000 ffff0000
8a70 fff2c800 ffff8008 09031d48 ffff0000 0b7bbd00 ffff0000 0b7bbd00 ffff0000
8a90 080861bc ffff0000 00000000 00000000 00000000 00000000 00000000 00000000
8ab0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8ad0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8af0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
X21: 0xffff8008f7a8b3a8:
b3a8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b3c8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b3e8 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b408 00000000 00000000 00000000 00000000 00000000 00000000 00000001 00000000
b428 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
b448 0053004d 00540046 00300031 00010030 eb07b520 ffff8008 20011201 00000003
b468 e418d109 0104404e 00010302 00000000 eb07b558 ffff8008 eb07b558 ffff8008
b488 f7a8b488 ffff8008 f7a8b488 ffff8008 f7a8b300 ffff8008 00000000 00000000
X24: 0xffff8008f2a3bf90:
bf90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
c010 00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000
c030 f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008
c050 f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
c070 f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008
X28: 0xffff8008f2a3bf90:
bf90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
c010 00000000 00000000 f2a3c018 ffff8008 f2a3c018 ffff8008 08a067dc ffff0000
c030 f2a5a000 ffff8008 091c3650 ffff0000 f716fd18 ffff8008 f716fe30 ffff8008
c050 f2ce4a30 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
c070 f76c8010 ffff8008 f2ce4b00 ffff8008 095cac68 ffff0000 f2a5a028 ffff8008
Process irq/125-5b11000 (pid: 2457, stack limit = 0xffff00000b7b8000)
Call trace:
Exception stack(0xffff00000b7bba40 to 0xffff00000b7bbb80)
ba40: 732a010310b9ed00 ffff0000089ff8d0 0000000000000006 0000000000000000
ba60: 0000000000000001 0000000000000000 0000000000000001 ffff8008f27a9c90
ba80: ffff8008f2a98a90 ffff00000b7bbd00 0000000000000a30 0000000000000008
baa0: 0000000000000008 e35502e30d44349c f1866f5b952aca46 0000000000000000
bac0: ffff0000082b7c9c 0000000000000000 0000000000000000 ffff0000089ff000
bae0: ffff00000afae000 ffff8008f7a8b428 ffff000009c8e000 0000000000000409
bb00: ffff8008f2a3c010 00000000ffffffa1 0000000000000000 0000000000000001
bb20: ffff8008f2a3c010 ffff00000b7bbb80 ffff000008a032fc ffff00000b7bbb80
bb40: ffff0000089ffb3c 00000000800001c5 ffff00000b7bbb80 732a010310b9ed00
bb60: ffffffffffffffff ffff0000080f777c ffff00000b7bbb80 ffff0000089ffb3c
[<ffff0000089ffb3c>] composite_setup+0x44/0x1508
[<ffff000008a032fc>] android_setup+0xb8/0x13c
[<ffff0000089bd9a8>] cdns3_ep0_delegate_req+0x44/0x70
[<ffff0000089bdff4>] cdns3_check_ep0_interrupt_proceed+0x33c/0x654
[<ffff0000089bca44>] cdns3_device_thread_irq_handler+0x4b0/0x4bc
[<ffff0000089b77b4>] cdns3_thread_irq+0x48/0x68
[<ffff000008145bf0>] irq_thread_fn+0x28/0x88
[<ffff000008145e38>] irq_thread+0x13c/0x228
[<ffff0000080fed70>] kthread+0x104/0x130
[<ffff000008085064>] ret_from_fork+0x10/0x18
oops2:
composite_disconnect: Calling disconnect on a Gadget that is not connected
android_work: did not send uevent (0 0 (null))
init: Received control message 'stop' for 'adbd' from pid: 3359 (/vendor/bin/hw/[email protected])
init: Sending signal 9 to service 'adbd' (pid 22343) process group...
------------[ cut here ]------------
audit: audit_lost=180038 audit_rate_limit=5 audit_backlog_limit=64
audit: rate limit exceeded
WARNING: CPU: 0 PID: 3468 at kernel_imx/drivers/usb/gadget/composite.c:2009 composite_disconnect+0x80/0x88
Modules linked in:
CPU: 0 PID: 3468 Comm: HWC-UEvent-Thre Not tainted 4.14.98-07846-g0b40a9b-dirty #16
Hardware name: Freescale i.MX8QM MEK (DT)
task: ffff8008f2349c00 task.stack: ffff00000b0a8000
PC is at composite_disconnect+0x80/0x88
LR is at composite_disconnect+0x80/0x88
pc : [<ffff0000089ff9b0>] lr : [<ffff0000089ff9b0>] pstate: 600001c5
sp : ffff000008003dd0
x29: ffff000008003dd0 x28: ffff8008f2349c00
x27: ffff000009885018 x26: ffff000008004000
Timeout for IPC response!
x25: ffff000009885018 x24: ffff000009c8e280
x23: ffff8008f2d98010 x22: 00000000000001c0
x21: ffff8008f2d98394 x20: ffff8008f2d98010
x19: 0000000000000000 x18: 0000e3956f4f075a
fxos8700 4-001e: i2c block read acc failed
x17: 0000e395735727e8 x16: ffff00000829f4d4
x15: ffffffffffffffff x14: 7463656e6e6f6320
x13: 746f6e2009090920 x12: 7369207461687420
x11: 7465676461472061 x10: 206e6f207463656e
x9 : 6e6f637369642067 x8 : ffff000009c8e280
x7 : ffff0000086ca6cc x6 : ffff000009f15e78
x5 : 0000000000000000 x4 : 0000000000000000
x3 : ffffffffffffffff x2 : c3f28b86000c3900
x1 : c3f28b86000c3900 x0 : 000000000000004e
X20: 0xffff8008f2d97f90:
7f90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
libprocessgroup: Failed to kill process cgroup uid 0 pid 22343 in 215ms, 1 processes remain
7fd0
Timeout for IPC response!
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
using random self ethernet address
7ff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
8010 00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc
using random host ethernet address
ffff0000
8030 f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008
8050 f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
8070 f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008
X21: 0xffff8008f2d98314:
8314 ffff8008 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8334 00000000 00000000 00000000 00000000 00000000 08a04cf4 ffff0000 00000000
8354 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
8374 00000000 00000000 00000000 00001001 00000000 00000000 00000000 00000000
8394 e4bbe4bb 0f230000 ffff0000 0afae000 ffff0000 ae001000 00000000 f206d400
Timeout for IPC response!
83b4 ffff8008 00000000 00000000 f7957b18 ffff8008 f7957718 ffff8008 f7957018
83d4 ffff8008 f7957118 ffff8008 f7957618 ffff8008 f7957818 ffff8008 f7957918
83f4 ffff8008 f7957d18 ffff8008 00000000 00000000 00000000 00000000 00000000
X23: 0xffff8008f2d97f90:
7f90 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fb0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fd0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7ff0 00000000 00000000 00000000 00000000 f76c8010 ffff8008 f76c8010 ffff8008
8010 00000100 00000000 f2d98018 ffff8008 f2d98018 ffff8008 08a067dc ffff0000
8030 f206d800 ffff8008 091c3650 ffff0000 f7957b18 ffff8008 f7957730 ffff8008
8050 f716a630 ffff8008 00000000 00000005 00000000 00000000 095d1568 ffff0000
8070 f76c8010 ffff8008 f716a800 ffff8008 095cac68 ffff0000 f206d828 ffff8008
X28: 0xffff8008f2349b80:
9b80 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9ba0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9bc0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9be0 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
9c00 00000022 00000000 ffffffff ffffffff 00010001 00000000 00000000 00000000
9c20 0b0a8000 ffff0000 00000002 00404040 00000000 00000000 00000000 00000000
9c40 00000001 00000000 00000001 00000000 001ebd44 00000001 f390b800 ffff8008
9c60 00000000 00000001 00000070 00000070 00000070 00000000 09031d48 ffff0000
Call trace:
Exception stack(0xffff000008003c90 to 0xffff000008003dd0)
3c80: 000000000000004e c3f28b86000c3900
3ca0: c3f28b86000c3900 ffffffffffffffff 0000000000000000 0000000000000000
3cc0: ffff000009f15e78 ffff0000086ca6cc ffff000009c8e280 6e6f637369642067
3ce0: 206e6f207463656e 7465676461472061 7369207461687420 746f6e2009090920
3d00: 7463656e6e6f6320 ffffffffffffffff ffff00000829f4d4 0000e395735727e8
3d20: 0000e3956f4f075a 0000000000000000 ffff8008f2d98010 ffff8008f2d98394
3d40: 00000000000001c0 ffff8008f2d98010 ffff000009c8e280 ffff000009885018
3d60: ffff000008004000 ffff000009885018 ffff8008f2349c00 ffff000008003dd0
3d80: ffff0000089ff9b0 ffff000008003dd0 ffff0000089ff9b0 00000000600001c5
3da0: ffff8008f33f2cd8 0000000000000000 0000ffffffffffff 0000000000000000
init: Received control message 'start' for 'adbd' from pid: 3359 (/vendor/bin/hw/[email protected])
3dc0: ffff000008003dd0 ffff0000089ff9b0
[<ffff0000089ff9b0>] composite_disconnect+0x80/0x88
[<ffff000008a044d4>] android_disconnect+0x3c/0x68
[<ffff0000089ba9f8>] cdns3_device_irq_handler+0xfc/0x2c8
[<ffff0000089b84c0>] cdns3_irq+0x44/0x94
[<ffff00000814494c>] __handle_irq_event_percpu+0x60/0x24c
[<ffff000008144c0c>] handle_irq_event+0x58/0xc0
[<ffff00000814873c>] handle_fasteoi_irq+0x98/0x180
[<ffff000008143a10>] generic_handle_irq+0x24/0x38
[<ffff000008144170>] __handle_domain_irq+0x60/0xac
[<ffff0000080819c4>] gic_handle_irq+0xd4/0x17c
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/gadget/configfs.c | 110 ++++++++++++++++++++++++++++++++--
1 file changed, 105 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 0251299428946..33852c2b29d1a 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -61,6 +61,8 @@ struct gadget_info {
bool use_os_desc;
char b_vendor_code;
char qw_sign[OS_STRING_QW_SIGN_LEN];
+ spinlock_t spinlock;
+ bool unbind;
};
static inline struct gadget_info *to_gadget_info(struct config_item *item)
@@ -1244,6 +1246,7 @@ static int configfs_composite_bind(struct usb_gadget *gadget,
int ret;
/* the gi->lock is hold by the caller */
+ gi->unbind = 0;
cdev->gadget = gadget;
set_gadget_data(gadget, cdev);
ret = composite_dev_prepare(composite, cdev);
@@ -1376,31 +1379,128 @@ static void configfs_composite_unbind(struct usb_gadget *gadget)
{
struct usb_composite_dev *cdev;
struct gadget_info *gi;
+ unsigned long flags;
/* the gi->lock is hold by the caller */
cdev = get_gadget_data(gadget);
gi = container_of(cdev, struct gadget_info, cdev);
+ spin_lock_irqsave(&gi->spinlock, flags);
+ gi->unbind = 1;
+ spin_unlock_irqrestore(&gi->spinlock, flags);
kfree(otg_desc[0]);
otg_desc[0] = NULL;
purge_configs_funcs(gi);
composite_dev_cleanup(cdev);
usb_ep_autoconfig_reset(cdev->gadget);
+ spin_lock_irqsave(&gi->spinlock, flags);
cdev->gadget = NULL;
set_gadget_data(gadget, NULL);
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+}
+
+static int configfs_composite_setup(struct usb_gadget *gadget,
+ const struct usb_ctrlrequest *ctrl)
+{
+ struct usb_composite_dev *cdev;
+ struct gadget_info *gi;
+ unsigned long flags;
+ int ret;
+
+ cdev = get_gadget_data(gadget);
+ if (!cdev)
+ return 0;
+
+ gi = container_of(cdev, struct gadget_info, cdev);
+ spin_lock_irqsave(&gi->spinlock, flags);
+ cdev = get_gadget_data(gadget);
+ if (!cdev || gi->unbind) {
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+ return 0;
+ }
+
+ ret = composite_setup(gadget, ctrl);
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+ return ret;
+}
+
+static void configfs_composite_disconnect(struct usb_gadget *gadget)
+{
+ struct usb_composite_dev *cdev;
+ struct gadget_info *gi;
+ unsigned long flags;
+
+ cdev = get_gadget_data(gadget);
+ if (!cdev)
+ return;
+
+ gi = container_of(cdev, struct gadget_info, cdev);
+ spin_lock_irqsave(&gi->spinlock, flags);
+ cdev = get_gadget_data(gadget);
+ if (!cdev || gi->unbind) {
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+ return;
+ }
+
+ composite_disconnect(gadget);
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+}
+
+static void configfs_composite_suspend(struct usb_gadget *gadget)
+{
+ struct usb_composite_dev *cdev;
+ struct gadget_info *gi;
+ unsigned long flags;
+
+ cdev = get_gadget_data(gadget);
+ if (!cdev)
+ return;
+
+ gi = container_of(cdev, struct gadget_info, cdev);
+ spin_lock_irqsave(&gi->spinlock, flags);
+ cdev = get_gadget_data(gadget);
+ if (!cdev || gi->unbind) {
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+ return;
+ }
+
+ composite_suspend(gadget);
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+}
+
+static void configfs_composite_resume(struct usb_gadget *gadget)
+{
+ struct usb_composite_dev *cdev;
+ struct gadget_info *gi;
+ unsigned long flags;
+
+ cdev = get_gadget_data(gadget);
+ if (!cdev)
+ return;
+
+ gi = container_of(cdev, struct gadget_info, cdev);
+ spin_lock_irqsave(&gi->spinlock, flags);
+ cdev = get_gadget_data(gadget);
+ if (!cdev || gi->unbind) {
+ spin_unlock_irqrestore(&gi->spinlock, flags);
+ return;
+ }
+
+ composite_resume(gadget);
+ spin_unlock_irqrestore(&gi->spinlock, flags);
}
static const struct usb_gadget_driver configfs_driver_template = {
.bind = configfs_composite_bind,
.unbind = configfs_composite_unbind,
- .setup = composite_setup,
- .reset = composite_disconnect,
- .disconnect = composite_disconnect,
+ .setup = configfs_composite_setup,
+ .reset = configfs_composite_disconnect,
+ .disconnect = configfs_composite_disconnect,
- .suspend = composite_suspend,
- .resume = composite_resume,
+ .suspend = configfs_composite_suspend,
+ .resume = configfs_composite_resume,
.max_speed = USB_SPEED_SUPER,
.driver = {
--
2.20.1
From: Jun Lei <[email protected]>
[ Upstream commit 8775e89fa7121535d2da738c95167b8c65aa6e90 ]
[why]
A display that supports DRR can never really be considered
"synchronized" with any other display because we can dynamically
enable DRR (i.e. without modeset). this will cause their
relative CRTC positions to drift and lose sync. this will disrupt
features such as MCLK switching that assume and depend on
their permanent alignment (that can only change with modeset)
[how]
check for ignore_msa in stream when considered synchronizability
this ignore_msa is basically actually implemented as "supports drr"
Signed-off-by: Jun Lei <[email protected]>
Reviewed-by: Yongqiang Sun <[email protected]>
Acked-by: Anthony Koo <[email protected]>
Acked-by: Leo Li <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
index 68db60e4caf32..d1a33e04570f4 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
@@ -394,6 +394,9 @@ bool resource_are_streams_timing_synchronizable(
if (stream1->view_format != stream2->view_format)
return false;
+ if (stream1->ignore_msa_timing_param || stream2->ignore_msa_timing_param)
+ return false;
+
return true;
}
static bool is_dp_and_hdmi_sharable(
@@ -1566,6 +1569,9 @@ bool dc_is_stream_unchanged(
if (!are_stream_backends_same(old_stream, stream))
return false;
+ if (old_stream->ignore_msa_timing_param != stream->ignore_msa_timing_param)
+ return false;
+
return true;
}
--
2.20.1
From: Taehee Yoo <[email protected]>
[ Upstream commit 1962f86b42ed06ea6af9ff09390243b99d9eb83a ]
virt_wifi_newlink() calls netdev_upper_dev_link() and it internally
holds reference count of lower interface.
Current code does not release a reference count of the lower interface
when the lower interface is being deleted.
So, reference count leaks occur.
Test commands:
ip link add dummy0 type dummy
ip link add vw1 link dummy0 type virt_wifi
ip link del dummy0
Splat looks like:
[ 133.787526][ T788] WARNING: CPU: 1 PID: 788 at net/core/dev.c:8274 rollback_registered_many+0x835/0xc80
[ 133.788355][ T788] Modules linked in: virt_wifi cfg80211 dummy team af_packet sch_fq_codel ip_tables x_tables unix
[ 133.789377][ T788] CPU: 1 PID: 788 Comm: ip Not tainted 5.4.0-rc3+ #96
[ 133.790069][ T788] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 133.791167][ T788] RIP: 0010:rollback_registered_many+0x835/0xc80
[ 133.791906][ T788] Code: 00 4d 85 ff 0f 84 b5 fd ff ff ba c0 0c 00 00 48 89 de 4c 89 ff e8 9b 58 04 00 48 89 df e8 30
[ 133.794317][ T788] RSP: 0018:ffff88805ba3f338 EFLAGS: 00010202
[ 133.795080][ T788] RAX: ffff88805e57e801 RBX: ffff88805ba34000 RCX: ffffffffa9294723
[ 133.796045][ T788] RDX: 1ffff1100b746816 RSI: 0000000000000008 RDI: ffffffffabcc4240
[ 133.797006][ T788] RBP: ffff88805ba3f4c0 R08: fffffbfff5798849 R09: fffffbfff5798849
[ 133.797993][ T788] R10: 0000000000000001 R11: fffffbfff5798848 R12: dffffc0000000000
[ 133.802514][ T788] R13: ffff88805ba3f440 R14: ffff88805ba3f400 R15: ffff88805ed622c0
[ 133.803237][ T788] FS: 00007f2e9608c0c0(0000) GS:ffff88806cc00000(0000) knlGS:0000000000000000
[ 133.804002][ T788] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 133.804664][ T788] CR2: 00007f2e95610603 CR3: 000000005f68c004 CR4: 00000000000606e0
[ 133.805363][ T788] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 133.806073][ T788] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 133.806787][ T788] Call Trace:
[ 133.807069][ T788] ? generic_xdp_install+0x310/0x310
[ 133.807612][ T788] ? lock_acquire+0x164/0x3b0
[ 133.808077][ T788] ? is_bpf_text_address+0x5/0xf0
[ 133.808640][ T788] ? deref_stack_reg+0x9c/0xd0
[ 133.809138][ T788] ? __nla_validate_parse+0x98/0x1ab0
[ 133.809944][ T788] unregister_netdevice_many.part.122+0x13/0x1b0
[ 133.810599][ T788] rtnl_delete_link+0xbc/0x100
[ 133.811073][ T788] ? rtnl_af_register+0xc0/0xc0
[ 133.811672][ T788] rtnl_dellink+0x30e/0x8a0
[ 133.812205][ T788] ? is_bpf_text_address+0x5/0xf0
[ ... ]
[ 144.110530][ T788] unregister_netdevice: waiting for dummy0 to become free. Usage count = 1
This patch adds notifier routine to delete upper interface before deleting
lower interface.
Fixes: c7cdba31ed8b ("mac80211-next: rtnetlink wifi simulation device")
Signed-off-by: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/virt_wifi.c | 54 ++++++++++++++++++++++++++++++--
1 file changed, 52 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/virt_wifi.c b/drivers/net/wireless/virt_wifi.c
index be92e1220284c..7997cc6de334f 100644
--- a/drivers/net/wireless/virt_wifi.c
+++ b/drivers/net/wireless/virt_wifi.c
@@ -548,6 +548,7 @@ static int virt_wifi_newlink(struct net *src_net, struct net_device *dev,
priv->is_connected = false;
priv->is_up = false;
INIT_DELAYED_WORK(&priv->connect, virt_wifi_connect_complete);
+ __module_get(THIS_MODULE);
return 0;
unregister_netdev:
@@ -578,6 +579,7 @@ static void virt_wifi_dellink(struct net_device *dev,
netdev_upper_dev_unlink(priv->lowerdev, dev);
unregister_netdevice_queue(dev, head);
+ module_put(THIS_MODULE);
/* Deleting the wiphy is handled in the module destructor. */
}
@@ -590,6 +592,42 @@ static struct rtnl_link_ops virt_wifi_link_ops = {
.priv_size = sizeof(struct virt_wifi_netdev_priv),
};
+static bool netif_is_virt_wifi_dev(const struct net_device *dev)
+{
+ return rcu_access_pointer(dev->rx_handler) == virt_wifi_rx_handler;
+}
+
+static int virt_wifi_event(struct notifier_block *this, unsigned long event,
+ void *ptr)
+{
+ struct net_device *lower_dev = netdev_notifier_info_to_dev(ptr);
+ struct virt_wifi_netdev_priv *priv;
+ struct net_device *upper_dev;
+ LIST_HEAD(list_kill);
+
+ if (!netif_is_virt_wifi_dev(lower_dev))
+ return NOTIFY_DONE;
+
+ switch (event) {
+ case NETDEV_UNREGISTER:
+ priv = rtnl_dereference(lower_dev->rx_handler_data);
+ if (!priv)
+ return NOTIFY_DONE;
+
+ upper_dev = priv->upperdev;
+
+ upper_dev->rtnl_link_ops->dellink(upper_dev, &list_kill);
+ unregister_netdevice_many(&list_kill);
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block virt_wifi_notifier = {
+ .notifier_call = virt_wifi_event,
+};
+
/* Acquires and releases the rtnl lock. */
static int __init virt_wifi_init_module(void)
{
@@ -598,14 +636,25 @@ static int __init virt_wifi_init_module(void)
/* Guaranteed to be locallly-administered and not multicast. */
eth_random_addr(fake_router_bssid);
+ err = register_netdevice_notifier(&virt_wifi_notifier);
+ if (err)
+ return err;
+
+ err = -ENOMEM;
common_wiphy = virt_wifi_make_wiphy();
if (!common_wiphy)
- return -ENOMEM;
+ goto notifier;
err = rtnl_link_register(&virt_wifi_link_ops);
if (err)
- virt_wifi_destroy_wiphy(common_wiphy);
+ goto destroy_wiphy;
+ return 0;
+
+destroy_wiphy:
+ virt_wifi_destroy_wiphy(common_wiphy);
+notifier:
+ unregister_netdevice_notifier(&virt_wifi_notifier);
return err;
}
@@ -615,6 +664,7 @@ static void __exit virt_wifi_cleanup_module(void)
/* Will delete any devices that depend on the wiphy. */
rtnl_link_unregister(&virt_wifi_link_ops);
virt_wifi_destroy_wiphy(common_wiphy);
+ unregister_netdevice_notifier(&virt_wifi_notifier);
}
module_init(virt_wifi_init_module);
--
2.20.1
From: Luca Coelho <[email protected]>
[ Upstream commit 17c216ed6b9eef34e647192063f6149d33eff579 ]
When converting the wrong qu configurations in an earlier commit, I
accidentally swapped 0x2720 and 0x30DC. Instead of converting 0x2720,
I converted 0x30DC. Undo 0x30DC and convert 0x2720.
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 109 +++++++++---------
1 file changed, 55 insertions(+), 54 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
index 3645c98c407e1..2ee5c5dc78cbb 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
@@ -618,60 +618,61 @@ static const struct pci_device_id iwl_hw_card_ids[] = {
{IWL_PCI_DEVICE(0x271B, 0x0210, iwl9160_2ac_cfg)},
{IWL_PCI_DEVICE(0x271B, 0x0214, iwl9260_2ac_cfg)},
{IWL_PCI_DEVICE(0x271C, 0x0214, iwl9260_2ac_cfg)},
- {IWL_PCI_DEVICE(0x2720, 0x0034, iwl9560_2ac_160_cfg_soc)},
- {IWL_PCI_DEVICE(0x2720, 0x0038, iwl9560_2ac_160_cfg_soc)},
- {IWL_PCI_DEVICE(0x2720, 0x003C, iwl9560_2ac_160_cfg_soc)},
- {IWL_PCI_DEVICE(0x2720, 0x0060, iwl9461_2ac_cfg_soc)},
- {IWL_PCI_DEVICE(0x2720, 0x0064, iwl9461_2ac_cfg_soc)},
- {IWL_PCI_DEVICE(0x2720, 0x00A0, iwl9462_2ac_cfg_soc)},
- {IWL_PCI_DEVICE(0x2720, 0x00A4, iwl9462_2ac_cfg_soc)},
- {IWL_PCI_DEVICE(0x2720, 0x0230, iwl9560_2ac_cfg)},
- {IWL_PCI_DEVICE(0x2720, 0x0234, iwl9560_2ac_cfg)},
- {IWL_PCI_DEVICE(0x2720, 0x0238, iwl9560_2ac_cfg)},
- {IWL_PCI_DEVICE(0x2720, 0x023C, iwl9560_2ac_cfg)},
- {IWL_PCI_DEVICE(0x2720, 0x0260, iwl9461_2ac_cfg_soc)},
- {IWL_PCI_DEVICE(0x2720, 0x0264, iwl9461_2ac_cfg_soc)},
- {IWL_PCI_DEVICE(0x2720, 0x02A0, iwl9462_2ac_cfg_soc)},
- {IWL_PCI_DEVICE(0x2720, 0x02A4, iwl9462_2ac_cfg_soc)},
- {IWL_PCI_DEVICE(0x2720, 0x1010, iwl9260_2ac_cfg)},
- {IWL_PCI_DEVICE(0x2720, 0x1030, iwl9560_2ac_cfg_soc)},
- {IWL_PCI_DEVICE(0x2720, 0x1210, iwl9260_2ac_cfg)},
- {IWL_PCI_DEVICE(0x2720, 0x1551, iwl9560_killer_s_2ac_cfg_soc)},
- {IWL_PCI_DEVICE(0x2720, 0x1552, iwl9560_killer_2ac_cfg_soc)},
- {IWL_PCI_DEVICE(0x2720, 0x2030, iwl9560_2ac_160_cfg_soc)},
- {IWL_PCI_DEVICE(0x2720, 0x2034, iwl9560_2ac_160_cfg_soc)},
- {IWL_PCI_DEVICE(0x2720, 0x4030, iwl9560_2ac_160_cfg_soc)},
- {IWL_PCI_DEVICE(0x2720, 0x4034, iwl9560_2ac_160_cfg_soc)},
- {IWL_PCI_DEVICE(0x2720, 0x40A4, iwl9462_2ac_cfg_soc)},
- {IWL_PCI_DEVICE(0x2720, 0x4234, iwl9560_2ac_cfg_soc)},
- {IWL_PCI_DEVICE(0x2720, 0x42A4, iwl9462_2ac_cfg_soc)},
-
- {IWL_PCI_DEVICE(0x30DC, 0x0030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x0034, iwl9560_2ac_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x0038, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x003C, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x0060, iwl9461_2ac_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x0064, iwl9461_2ac_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x00A0, iwl9462_2ac_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x00A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x0230, iwl9560_2ac_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x0234, iwl9560_2ac_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x0238, iwl9560_2ac_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x023C, iwl9560_2ac_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x0260, iwl9461_2ac_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x0264, iwl9461_2ac_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x02A0, iwl9462_2ac_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x02A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x1030, iwl9560_2ac_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x1551, killer1550s_2ac_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x1552, killer1550i_2ac_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x2030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x2034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x4030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x4034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x40A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x4234, iwl9560_2ac_cfg_qu_b0_jf_b0)},
- {IWL_PCI_DEVICE(0x30DC, 0x42A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+
+ {IWL_PCI_DEVICE(0x2720, 0x0034, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x0038, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x003C, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x0060, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x0064, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x00A0, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x00A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x0230, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x0234, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x0238, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x023C, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x0260, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x0264, iwl9461_2ac_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x02A0, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x02A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x1030, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x1551, killer1550s_2ac_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x1552, killer1550i_2ac_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x2030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x2034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x4030, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x4034, iwl9560_2ac_160_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x40A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x4234, iwl9560_2ac_cfg_qu_b0_jf_b0)},
+ {IWL_PCI_DEVICE(0x2720, 0x42A4, iwl9462_2ac_cfg_qu_b0_jf_b0)},
+
+ {IWL_PCI_DEVICE(0x30DC, 0x0030, iwl9560_2ac_160_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x0034, iwl9560_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x0038, iwl9560_2ac_160_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x003C, iwl9560_2ac_160_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x0060, iwl9460_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x0064, iwl9461_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x00A0, iwl9462_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x00A4, iwl9462_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x0230, iwl9560_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x0234, iwl9560_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x0238, iwl9560_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x023C, iwl9560_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x0260, iwl9461_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x0264, iwl9461_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x02A0, iwl9462_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x02A4, iwl9462_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x1010, iwl9260_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x30DC, 0x1030, iwl9560_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x1210, iwl9260_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x30DC, 0x1551, iwl9560_killer_s_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x1552, iwl9560_killer_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x2030, iwl9560_2ac_160_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x2034, iwl9560_2ac_160_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x4030, iwl9560_2ac_160_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x4034, iwl9560_2ac_160_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x40A4, iwl9462_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x4234, iwl9560_2ac_cfg_soc)},
+ {IWL_PCI_DEVICE(0x30DC, 0x42A4, iwl9462_2ac_cfg_soc)},
{IWL_PCI_DEVICE(0x31DC, 0x0030, iwl9560_2ac_160_cfg_shared_clk)},
{IWL_PCI_DEVICE(0x31DC, 0x0034, iwl9560_2ac_cfg_shared_clk)},
--
2.20.1
From: Daniel Wagner <[email protected]>
[ Upstream commit 0fd103ccfe6a06e40e2d9d8c91d96332cc9e1239 ]
The initial lpfc_desc_set_adisc implementation in commit
dea3101e0a5c ("lpfc: add Emulex FC driver version 8.0.28") enabled ADISC if
cfg_use_adisc && RSCN_MODE && FCP_2_DEVICE
In commit 92d7f7b0cde3 ("[SCSI] lpfc: NPIV: add NPIV support on top of
SLI-3") this changed to
(cfg_use_adisc && RSC_MODE) || FCP_2_DEVICE
and later in commit ffc954936b13 ("[SCSI] lpfc 8.3.13: FC Discovery Fixes
and enhancements.") to
(cfg_use_adisc && RSC_MODE) || (FCP_2_DEVICE && FCP_TARGET)
A customer reports that after a devloss, an ADISC failure is logged. It
turns out the ADISC flag is set even the user explicitly set lpfc_use_adisc
= 0.
[Sat Dec 22 22:55:58 2018] lpfc 0000:82:00.0: 2:(0):0203 Devloss timeout on WWPN 50:01:43:80:12:8e:40:20 NPort x05df00 Data: x82000000 x8 xa
[Sat Dec 22 23:08:20 2018] lpfc 0000:82:00.0: 2:(0):2755 ADISC failure DID:05DF00 Status:x9/x70000
[mkp: fixed Hannes' email]
Fixes: 92d7f7b0cde3 ("[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3")
Cc: Dick Kennedy <[email protected]>
Cc: James Smart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: James Smart <[email protected]>
Signed-off-by: Daniel Wagner <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_nportdisc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 59252bfca14e2..41309ac656934 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -845,9 +845,9 @@ lpfc_disc_set_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
if (!(vport->fc_flag & FC_PT2PT)) {
/* Check config parameter use-adisc or FCP-2 */
- if ((vport->cfg_use_adisc && (vport->fc_flag & FC_RSCN_MODE)) ||
+ if (vport->cfg_use_adisc && ((vport->fc_flag & FC_RSCN_MODE) ||
((ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) &&
- (ndlp->nlp_type & NLP_FCP_TARGET))) {
+ (ndlp->nlp_type & NLP_FCP_TARGET)))) {
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag |= NLP_NPR_ADISC;
spin_unlock_irq(shost->host_lock);
--
2.20.1
From: Manfred Rudigier <[email protected]>
[ Upstream commit 8d5cfd7f76a2414e23c74bb8858af7540365d985 ]
At least on the i350 there is an annoying behavior that is maybe also
present on 82580 devices, but was probably not noticed yet as MAS is not
widely used.
If no cable is connected on both fiber/copper ports the media auto sense
code will constantly swap between them as part of the watchdog task and
produce many unnecessary kernel log messages.
The swap code responsible for this behavior (switching to fiber) should
not be executed if the current media type is copper and there is no signal
detected on the fiber port. In this case we can safely wait until the
AUTOSENSE_EN bit is cleared.
Signed-off-by: Manfred Rudigier <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/igb/igb_main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index b4df3e319467e..93a1352f5be90 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -2064,7 +2064,8 @@ static void igb_check_swap_media(struct igb_adapter *adapter)
if ((hw->phy.media_type == e1000_media_type_copper) &&
(!(connsw & E1000_CONNSW_AUTOSENSE_EN))) {
swap_now = true;
- } else if (!(connsw & E1000_CONNSW_SERDESD)) {
+ } else if ((hw->phy.media_type != e1000_media_type_copper) &&
+ !(connsw & E1000_CONNSW_SERDESD)) {
/* copper signal takes time to appear */
if (adapter->copper_tries < 4) {
adapter->copper_tries++;
--
2.20.1
From: Baolin Wang <[email protected]>
[ Upstream commit ec1ac309596a7bdf206743b092748205f6cd5720 ]
If we terminate the channel to free all descriptors associated with this
channel, we will leak the memory of current descriptor if the current
descriptor is not completed, since it had been deteled from the desc_issued
list and have not been added into the desc_completed list.
Thus we should check if current descriptor is completed or not, when freeing
the descriptors associated with one channel, if not, we should free it to
avoid this issue.
Fixes: 9b3b8171f7f4 ("dmaengine: sprd: Add Spreadtrum DMA driver")
Reported-by: Zhenfang Wang <[email protected]>
Tested-by: Zhenfang Wang <[email protected]>
Signed-off-by: Baolin Wang <[email protected]>
Link: https://lore.kernel.org/r/170dbbc6d5366b6fa974ce2d366652e23a334251.1570609788.git.baolin.wang@linaro.org
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/sprd-dma.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index a4a91f233121a..8546ad0347208 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -212,6 +212,7 @@ struct sprd_dma_dev {
struct sprd_dma_chn channels[0];
};
+static void sprd_dma_free_desc(struct virt_dma_desc *vd);
static bool sprd_dma_filter_fn(struct dma_chan *chan, void *param);
static struct of_dma_filter_info sprd_dma_info = {
.filter_fn = sprd_dma_filter_fn,
@@ -613,12 +614,19 @@ static int sprd_dma_alloc_chan_resources(struct dma_chan *chan)
static void sprd_dma_free_chan_resources(struct dma_chan *chan)
{
struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+ struct virt_dma_desc *cur_vd = NULL;
unsigned long flags;
spin_lock_irqsave(&schan->vc.lock, flags);
+ if (schan->cur_desc)
+ cur_vd = &schan->cur_desc->vd;
+
sprd_dma_stop(schan);
spin_unlock_irqrestore(&schan->vc.lock, flags);
+ if (cur_vd)
+ sprd_dma_free_desc(cur_vd);
+
vchan_free_chan_resources(&schan->vc);
pm_runtime_put(chan->device->dev);
}
@@ -1031,15 +1039,22 @@ static int sprd_dma_resume(struct dma_chan *chan)
static int sprd_dma_terminate_all(struct dma_chan *chan)
{
struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+ struct virt_dma_desc *cur_vd = NULL;
unsigned long flags;
LIST_HEAD(head);
spin_lock_irqsave(&schan->vc.lock, flags);
+ if (schan->cur_desc)
+ cur_vd = &schan->cur_desc->vd;
+
sprd_dma_stop(schan);
vchan_get_all_descriptors(&schan->vc, &head);
spin_unlock_irqrestore(&schan->vc.lock, flags);
+ if (cur_vd)
+ sprd_dma_free_desc(cur_vd);
+
vchan_dma_desc_free_list(&schan->vc, &head);
return 0;
}
--
2.20.1
From: Florian Fainelli <[email protected]>
[ Upstream commit 1cf45b8fdbb87040e1d1bd793891089f4678aa41 ]
The Broadcom Brahma-B53 core is susceptible to the issue described by
ARM64_ERRATUM_843419 so this commit enables the workaround to be applied
when executing on that core.
Since there are now multiple entries to match, we must convert the
existing ARM64_ERRATUM_843419 into an erratum list and use
cpucap_multi_entry_cap_matches to match our entries.
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
Documentation/arm64/silicon-errata.rst | 2 ++
arch/arm64/kernel/cpu_errata.c | 23 ++++++++++++++++++++---
2 files changed, 22 insertions(+), 3 deletions(-)
diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
index 8c87c68dcc324..d5f72a5b214f8 100644
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@@ -93,6 +93,8 @@ stable kernels.
+----------------+-----------------+-----------------+-----------------------------+
| Broadcom | Brahma-B53 | N/A | ARM64_ERRATUM_845719 |
+----------------+-----------------+-----------------+-----------------------------+
+| Broadcom | Brahma-B53 | N/A | ARM64_ERRATUM_843419 |
++----------------+-----------------+-----------------+-----------------------------+
+----------------+-----------------+-----------------+-----------------------------+
| Cavium | ThunderX ITS | #22375,24313 | CAVIUM_ERRATUM_22375 |
+----------------+-----------------+-----------------+-----------------------------+
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 799d62ef7a9bd..ed4c2f28f1576 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -755,6 +755,23 @@ static const struct midr_range erratum_845719_list[] = {
};
#endif
+#ifdef CONFIG_ARM64_ERRATUM_843419
+static const struct arm64_cpu_capabilities erratum_843419_list[] = {
+ {
+ /* Cortex-A53 r0p[01234] */
+ .matches = is_affected_midr_range,
+ ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 4),
+ MIDR_FIXED(0x4, BIT(8)),
+ },
+ {
+ /* Brahma-B53 r0p[0] */
+ .matches = is_affected_midr_range,
+ ERRATA_MIDR_REV(MIDR_BRAHMA_B53, 0, 0),
+ },
+ {},
+};
+#endif
+
const struct arm64_cpu_capabilities arm64_errata[] = {
#ifdef CONFIG_ARM64_WORKAROUND_CLEAN_CACHE
{
@@ -786,11 +803,11 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
#endif
#ifdef CONFIG_ARM64_ERRATUM_843419
{
- /* Cortex-A53 r0p[01234] */
.desc = "ARM erratum 843419",
.capability = ARM64_WORKAROUND_843419,
- ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A53, 0, 0, 4),
- MIDR_FIXED(0x4, BIT(8)),
+ .type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+ .matches = cpucap_multi_entry_cap_matches,
+ .match_list = erratum_843419_list,
},
#endif
#ifdef CONFIG_ARM64_ERRATUM_845719
--
2.20.1
From: Navid Emamdoost <[email protected]>
[ Upstream commit c8c2a057fdc7de1cd16f4baa51425b932a42eb39 ]
In mlx5_fpga_conn_create_cq if mlx5_vector2eqn fails the allocated
memory should be released.
Fixes: 537a50574175 ("net/mlx5: FPGA, Add high-speed connection routines")
Signed-off-by: Navid Emamdoost <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c b/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c
index 4c50efe4e7f11..61021133029e6 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fpga/conn.c
@@ -464,8 +464,10 @@ static int mlx5_fpga_conn_create_cq(struct mlx5_fpga_conn *conn, int cq_size)
}
err = mlx5_vector2eqn(mdev, smp_processor_id(), &eqn, &irqn);
- if (err)
+ if (err) {
+ kvfree(in);
goto err_cqwq;
+ }
cqc = MLX5_ADDR_OF(create_cq_in, in, cq_context);
MLX5_SET(cqc, cqc, log_cq_size, ilog2(cq_size));
--
2.20.1
From: Takashi Iwai <[email protected]>
commit 57f8770620e9b51c61089751f0b5ad3dbe376ff2 upstream.
Introduce a new helper to validate each audio descriptor unit before
and check the unit before actually accessing it. This should harden
against the OOB access cases with malformed descriptors that have been
recently frequently reported by fuzzers.
The existing descriptor checks are still kept although they become
superfluous after this patch. They'll be cleaned up eventually
later.
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/Makefile | 3
sound/usb/helper.h | 4
sound/usb/mixer.c | 10 +
sound/usb/power.c | 2
sound/usb/quirks.c | 3
sound/usb/stream.c | 25 +--
sound/usb/validate.c | 332 +++++++++++++++++++++++++++++++++++++++++++++++++++
7 files changed, 366 insertions(+), 13 deletions(-)
--- a/sound/usb/Makefile
+++ b/sound/usb/Makefile
@@ -16,7 +16,8 @@ snd-usb-audio-objs := card.o \
power.o \
proc.o \
quirks.o \
- stream.o
+ stream.o \
+ validate.o
snd-usb-audio-$(CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER) += media.o
--- a/sound/usb/helper.h
+++ b/sound/usb/helper.h
@@ -31,4 +31,8 @@ static inline int snd_usb_ctrl_intf(stru
return get_iface_desc(chip->ctrl_intf)->bInterfaceNumber;
}
+/* in validate.c */
+bool snd_usb_validate_audio_desc(void *p, int protocol);
+bool snd_usb_validate_midi_desc(void *p);
+
#endif /* __USBAUDIO_HELPER_H */
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -785,6 +785,8 @@ static int __check_input_term(struct mix
p1 = find_audio_control_unit(state, id);
if (!p1)
break;
+ if (!snd_usb_validate_audio_desc(p1, protocol))
+ break; /* bad descriptor */
hdr = p1;
term->id = id;
@@ -2775,6 +2777,11 @@ static int parse_audio_unit(struct mixer
return -EINVAL;
}
+ if (!snd_usb_validate_audio_desc(p1, protocol)) {
+ usb_audio_dbg(state->chip, "invalid unit %d\n", unitid);
+ return 0; /* skip invalid unit */
+ }
+
if (protocol == UAC_VERSION_1 || protocol == UAC_VERSION_2) {
switch (p1[2]) {
case UAC_INPUT_TERMINAL:
@@ -3145,6 +3152,9 @@ static int snd_usb_mixer_controls(struct
while ((p = snd_usb_find_csint_desc(mixer->hostif->extra,
mixer->hostif->extralen,
p, UAC_OUTPUT_TERMINAL)) != NULL) {
+ if (!snd_usb_validate_audio_desc(p, mixer->protocol))
+ continue; /* skip invalid descriptor */
+
if (mixer->protocol == UAC_VERSION_1) {
struct uac1_output_terminal_descriptor *desc = p;
--- a/sound/usb/power.c
+++ b/sound/usb/power.c
@@ -31,6 +31,8 @@ snd_usb_find_power_domain(struct usb_hos
struct uac3_power_domain_descriptor *pd_desc = p;
int i;
+ if (!snd_usb_validate_audio_desc(p, UAC_VERSION_3))
+ continue;
for (i = 0; i < pd_desc->bNrEntities; i++) {
if (pd_desc->baEntityID[i] == id) {
pd->pd_id = pd_desc->bPowerDomainID;
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -248,6 +248,9 @@ static int create_yamaha_midi_quirk(stru
NULL, USB_MS_MIDI_OUT_JACK);
if (!injd && !outjd)
return -ENODEV;
+ if (!snd_usb_validate_midi_desc(injd) ||
+ !snd_usb_validate_midi_desc(outjd))
+ return -ENODEV;
if (injd && (injd->bLength < 5 ||
(injd->bJackType != USB_MS_EMBEDDED &&
injd->bJackType != USB_MS_EXTERNAL)))
--- a/sound/usb/stream.c
+++ b/sound/usb/stream.c
@@ -627,16 +627,14 @@ static int parse_uac_endpoint_attributes
*/
static void *
snd_usb_find_input_terminal_descriptor(struct usb_host_interface *ctrl_iface,
- int terminal_id, bool uac23)
+ int terminal_id, int protocol)
{
struct uac2_input_terminal_descriptor *term = NULL;
- size_t minlen = uac23 ? sizeof(struct uac2_input_terminal_descriptor) :
- sizeof(struct uac_input_terminal_descriptor);
while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
ctrl_iface->extralen,
term, UAC_INPUT_TERMINAL))) {
- if (term->bLength < minlen)
+ if (!snd_usb_validate_audio_desc(term, protocol))
continue;
if (term->bTerminalID == terminal_id)
return term;
@@ -647,7 +645,7 @@ snd_usb_find_input_terminal_descriptor(s
static void *
snd_usb_find_output_terminal_descriptor(struct usb_host_interface *ctrl_iface,
- int terminal_id)
+ int terminal_id, int protocol)
{
/* OK to use with both UAC2 and UAC3 */
struct uac2_output_terminal_descriptor *term = NULL;
@@ -655,8 +653,9 @@ snd_usb_find_output_terminal_descriptor(
while ((term = snd_usb_find_csint_desc(ctrl_iface->extra,
ctrl_iface->extralen,
term, UAC_OUTPUT_TERMINAL))) {
- if (term->bLength >= sizeof(*term) &&
- term->bTerminalID == terminal_id)
+ if (!snd_usb_validate_audio_desc(term, protocol))
+ continue;
+ if (term->bTerminalID == terminal_id)
return term;
}
@@ -731,7 +730,7 @@ snd_usb_get_audioformat_uac12(struct snd
iterm = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
as->bTerminalLink,
- false);
+ protocol);
if (iterm) {
num_channels = iterm->bNrChannels;
chconfig = le16_to_cpu(iterm->wChannelConfig);
@@ -767,7 +766,7 @@ snd_usb_get_audioformat_uac12(struct snd
*/
input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
as->bTerminalLink,
- true);
+ protocol);
if (input_term) {
clock = input_term->bCSourceID;
if (!chconfig && (num_channels == input_term->bNrChannels))
@@ -776,7 +775,8 @@ snd_usb_get_audioformat_uac12(struct snd
}
output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf,
- as->bTerminalLink);
+ as->bTerminalLink,
+ protocol);
if (output_term) {
clock = output_term->bCSourceID;
goto found_clock;
@@ -1002,14 +1002,15 @@ snd_usb_get_audioformat_uac3(struct snd_
*/
input_term = snd_usb_find_input_terminal_descriptor(chip->ctrl_intf,
as->bTerminalLink,
- true);
+ UAC_VERSION_3);
if (input_term) {
clock = input_term->bCSourceID;
goto found_clock;
}
output_term = snd_usb_find_output_terminal_descriptor(chip->ctrl_intf,
- as->bTerminalLink);
+ as->bTerminalLink,
+ UAC_VERSION_3);
if (output_term) {
clock = output_term->bCSourceID;
goto found_clock;
--- /dev/null
+++ b/sound/usb/validate.c
@@ -0,0 +1,332 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+//
+// Validation of USB-audio class descriptors
+//
+
+#include <linux/init.h>
+#include <linux/usb.h>
+#include <linux/usb/audio.h>
+#include <linux/usb/audio-v2.h>
+#include <linux/usb/audio-v3.h>
+#include <linux/usb/midi.h>
+#include "usbaudio.h"
+#include "helper.h"
+
+struct usb_desc_validator {
+ unsigned char protocol;
+ unsigned char type;
+ bool (*func)(const void *p, const struct usb_desc_validator *v);
+ size_t size;
+};
+
+#define UAC_VERSION_ALL (unsigned char)(-1)
+
+/* UAC1 only */
+static bool validate_uac1_header(const void *p,
+ const struct usb_desc_validator *v)
+{
+ const struct uac1_ac_header_descriptor *d = p;
+
+ return d->bLength >= sizeof(*d) &&
+ d->bLength >= sizeof(*d) + d->bInCollection;
+}
+
+/* for mixer unit; covering all UACs */
+static bool validate_mixer_unit(const void *p,
+ const struct usb_desc_validator *v)
+{
+ const struct uac_mixer_unit_descriptor *d = p;
+ size_t len;
+
+ if (d->bLength < sizeof(*d) || !d->bNrInPins)
+ return false;
+ len = sizeof(*d) + d->bNrInPins;
+ /* We can't determine the bitmap size only from this unit descriptor,
+ * so just check with the remaining length.
+ * The actual bitmap is checked at mixer unit parser.
+ */
+ switch (v->protocol) {
+ case UAC_VERSION_1:
+ default:
+ len += 2 + 1; /* wChannelConfig, iChannelNames */
+ /* bmControls[n*m] */
+ len += 1; /* iMixer */
+ break;
+ case UAC_VERSION_2:
+ len += 4 + 1; /* bmChannelConfig, iChannelNames */
+ /* bmMixerControls[n*m] */
+ len += 1 + 1; /* bmControls, iMixer */
+ break;
+ case UAC_VERSION_3:
+ len += 2; /* wClusterDescrID */
+ /* bmMixerControls[n*m] */
+ break;
+ }
+ return d->bLength >= len;
+}
+
+/* both for processing and extension units; covering all UACs */
+static bool validate_processing_unit(const void *p,
+ const struct usb_desc_validator *v)
+{
+ const struct uac_processing_unit_descriptor *d = p;
+ const unsigned char *hdr = p;
+ size_t len, m;
+
+ if (d->bLength < sizeof(*d))
+ return false;
+ len = d->bLength < sizeof(*d) + d->bNrInPins;
+ if (d->bLength < len)
+ return false;
+ switch (v->protocol) {
+ case UAC_VERSION_1:
+ default:
+ /* bNrChannels, wChannelConfig, iChannelNames, bControlSize */
+ len += 1 + 2 + 1 + 1;
+ if (d->bLength < len) /* bControlSize */
+ return false;
+ m = hdr[len];
+ len += 1 + m + 1; /* bControlSize, bmControls, iProcessing */
+ break;
+ case UAC_VERSION_2:
+ /* bNrChannels, bmChannelConfig, iChannelNames */
+ len += 1 + 4 + 1;
+ if (v->type == UAC2_PROCESSING_UNIT_V2)
+ len += 2; /* bmControls -- 2 bytes for PU */
+ else
+ len += 1; /* bmControls -- 1 byte for EU */
+ len += 1; /* iProcessing */
+ break;
+ case UAC_VERSION_3:
+ /* wProcessingDescrStr, bmControls */
+ len += 2 + 4;
+ break;
+ }
+ if (d->bLength < len)
+ return false;
+
+ switch (v->protocol) {
+ case UAC_VERSION_1:
+ default:
+ if (v->type == UAC1_EXTENSION_UNIT)
+ return true; /* OK */
+ switch (d->wProcessType) {
+ case UAC_PROCESS_UP_DOWNMIX:
+ case UAC_PROCESS_DOLBY_PROLOGIC:
+ if (d->bLength < len + 1) /* bNrModes */
+ return false;
+ m = hdr[len];
+ len += 1 + m * 2; /* bNrModes, waModes(n) */
+ break;
+ default:
+ break;
+ }
+ break;
+ case UAC_VERSION_2:
+ if (v->type == UAC2_EXTENSION_UNIT_V2)
+ return true; /* OK */
+ switch (d->wProcessType) {
+ case UAC2_PROCESS_UP_DOWNMIX:
+ case UAC2_PROCESS_DOLBY_PROLOCIC: /* SiC! */
+ if (d->bLength < len + 1) /* bNrModes */
+ return false;
+ m = hdr[len];
+ len += 1 + m * 4; /* bNrModes, daModes(n) */
+ break;
+ default:
+ break;
+ }
+ break;
+ case UAC_VERSION_3:
+ if (v->type == UAC3_EXTENSION_UNIT) {
+ len += 2; /* wClusterDescrID */
+ break;
+ }
+ switch (d->wProcessType) {
+ case UAC3_PROCESS_UP_DOWNMIX:
+ if (d->bLength < len + 1) /* bNrModes */
+ return false;
+ m = hdr[len];
+ len += 1 + m * 2; /* bNrModes, waClusterDescrID(n) */
+ break;
+ case UAC3_PROCESS_MULTI_FUNCTION:
+ len += 2 + 4; /* wClusterDescrID, bmAlgorighms */
+ break;
+ default:
+ break;
+ }
+ break;
+ }
+ if (d->bLength < len)
+ return false;
+
+ return true;
+}
+
+/* both for selector and clock selector units; covering all UACs */
+static bool validate_selector_unit(const void *p,
+ const struct usb_desc_validator *v)
+{
+ const struct uac_selector_unit_descriptor *d = p;
+ size_t len;
+
+ if (d->bLength < sizeof(*d))
+ return false;
+ len = sizeof(*d) + d->bNrInPins;
+ switch (v->protocol) {
+ case UAC_VERSION_1:
+ default:
+ len += 1; /* iSelector */
+ break;
+ case UAC_VERSION_2:
+ len += 1 + 1; /* bmControls, iSelector */
+ break;
+ case UAC_VERSION_3:
+ len += 4 + 2; /* bmControls, wSelectorDescrStr */
+ break;
+ }
+ return d->bLength >= len;
+}
+
+static bool validate_uac1_feature_unit(const void *p,
+ const struct usb_desc_validator *v)
+{
+ const struct uac_feature_unit_descriptor *d = p;
+
+ if (d->bLength < sizeof(*d) || !d->bControlSize)
+ return false;
+ /* at least bmaControls(0) for master channel + iFeature */
+ return d->bLength >= sizeof(*d) + d->bControlSize + 1;
+}
+
+static bool validate_uac2_feature_unit(const void *p,
+ const struct usb_desc_validator *v)
+{
+ const struct uac2_feature_unit_descriptor *d = p;
+
+ if (d->bLength < sizeof(*d))
+ return false;
+ /* at least bmaControls(0) for master channel + iFeature */
+ return d->bLength >= sizeof(*d) + 4 + 1;
+}
+
+static bool validate_uac3_feature_unit(const void *p,
+ const struct usb_desc_validator *v)
+{
+ const struct uac3_feature_unit_descriptor *d = p;
+
+ if (d->bLength < sizeof(*d))
+ return false;
+ /* at least bmaControls(0) for master channel + wFeatureDescrStr */
+ return d->bLength >= sizeof(*d) + 4 + 2;
+}
+
+static bool validate_midi_out_jack(const void *p,
+ const struct usb_desc_validator *v)
+{
+ const struct usb_midi_out_jack_descriptor *d = p;
+
+ return d->bLength >= sizeof(*d) &&
+ d->bLength >= sizeof(*d) + d->bNrInputPins * 2;
+}
+
+#define FIXED(p, t, s) { .protocol = (p), .type = (t), .size = sizeof(s) }
+#define FUNC(p, t, f) { .protocol = (p), .type = (t), .func = (f) }
+
+static struct usb_desc_validator audio_validators[] = {
+ /* UAC1 */
+ FUNC(UAC_VERSION_1, UAC_HEADER, validate_uac1_header),
+ FIXED(UAC_VERSION_1, UAC_INPUT_TERMINAL,
+ struct uac_input_terminal_descriptor),
+ FIXED(UAC_VERSION_1, UAC_OUTPUT_TERMINAL,
+ struct uac1_output_terminal_descriptor),
+ FUNC(UAC_VERSION_1, UAC_MIXER_UNIT, validate_mixer_unit),
+ FUNC(UAC_VERSION_1, UAC_SELECTOR_UNIT, validate_selector_unit),
+ FUNC(UAC_VERSION_1, UAC_FEATURE_UNIT, validate_uac1_feature_unit),
+ FUNC(UAC_VERSION_1, UAC1_PROCESSING_UNIT, validate_processing_unit),
+ FUNC(UAC_VERSION_1, UAC1_EXTENSION_UNIT, validate_processing_unit),
+
+ /* UAC2 */
+ FIXED(UAC_VERSION_2, UAC_HEADER, struct uac2_ac_header_descriptor),
+ FIXED(UAC_VERSION_2, UAC_INPUT_TERMINAL,
+ struct uac2_input_terminal_descriptor),
+ FIXED(UAC_VERSION_2, UAC_OUTPUT_TERMINAL,
+ struct uac2_output_terminal_descriptor),
+ FUNC(UAC_VERSION_2, UAC_MIXER_UNIT, validate_mixer_unit),
+ FUNC(UAC_VERSION_2, UAC_SELECTOR_UNIT, validate_selector_unit),
+ FUNC(UAC_VERSION_2, UAC_FEATURE_UNIT, validate_uac2_feature_unit),
+ /* UAC_VERSION_2, UAC2_EFFECT_UNIT: not implemented yet */
+ FUNC(UAC_VERSION_2, UAC2_PROCESSING_UNIT_V2, validate_processing_unit),
+ FUNC(UAC_VERSION_2, UAC2_EXTENSION_UNIT_V2, validate_processing_unit),
+ FIXED(UAC_VERSION_2, UAC2_CLOCK_SOURCE,
+ struct uac_clock_source_descriptor),
+ FUNC(UAC_VERSION_2, UAC2_CLOCK_SELECTOR, validate_selector_unit),
+ FIXED(UAC_VERSION_2, UAC2_CLOCK_MULTIPLIER,
+ struct uac_clock_multiplier_descriptor),
+ /* UAC_VERSION_2, UAC2_SAMPLE_RATE_CONVERTER: not implemented yet */
+
+ /* UAC3 */
+ FIXED(UAC_VERSION_2, UAC_HEADER, struct uac3_ac_header_descriptor),
+ FIXED(UAC_VERSION_3, UAC_INPUT_TERMINAL,
+ struct uac3_input_terminal_descriptor),
+ FIXED(UAC_VERSION_3, UAC_OUTPUT_TERMINAL,
+ struct uac3_output_terminal_descriptor),
+ /* UAC_VERSION_3, UAC3_EXTENDED_TERMINAL: not implemented yet */
+ FUNC(UAC_VERSION_3, UAC3_MIXER_UNIT, validate_mixer_unit),
+ FUNC(UAC_VERSION_3, UAC3_SELECTOR_UNIT, validate_selector_unit),
+ FUNC(UAC_VERSION_3, UAC_FEATURE_UNIT, validate_uac3_feature_unit),
+ /* UAC_VERSION_3, UAC3_EFFECT_UNIT: not implemented yet */
+ FUNC(UAC_VERSION_3, UAC3_PROCESSING_UNIT, validate_processing_unit),
+ FUNC(UAC_VERSION_3, UAC3_EXTENSION_UNIT, validate_processing_unit),
+ FIXED(UAC_VERSION_3, UAC3_CLOCK_SOURCE,
+ struct uac3_clock_source_descriptor),
+ FUNC(UAC_VERSION_3, UAC3_CLOCK_SELECTOR, validate_selector_unit),
+ FIXED(UAC_VERSION_3, UAC3_CLOCK_MULTIPLIER,
+ struct uac3_clock_multiplier_descriptor),
+ /* UAC_VERSION_3, UAC3_SAMPLE_RATE_CONVERTER: not implemented yet */
+ /* UAC_VERSION_3, UAC3_CONNECTORS: not implemented yet */
+ { } /* terminator */
+};
+
+static struct usb_desc_validator midi_validators[] = {
+ FIXED(UAC_VERSION_ALL, USB_MS_HEADER,
+ struct usb_ms_header_descriptor),
+ FIXED(UAC_VERSION_ALL, USB_MS_MIDI_IN_JACK,
+ struct usb_midi_in_jack_descriptor),
+ FUNC(UAC_VERSION_ALL, USB_MS_MIDI_OUT_JACK,
+ validate_midi_out_jack),
+ { } /* terminator */
+};
+
+
+/* Validate the given unit descriptor, return true if it's OK */
+static bool validate_desc(unsigned char *hdr, int protocol,
+ const struct usb_desc_validator *v)
+{
+ if (hdr[1] != USB_DT_CS_INTERFACE)
+ return true; /* don't care */
+
+ for (; v->type; v++) {
+ if (v->type == hdr[2] &&
+ (v->protocol == UAC_VERSION_ALL ||
+ v->protocol == protocol)) {
+ if (v->func)
+ return v->func(hdr, v);
+ /* check for the fixed size */
+ return hdr[0] >= v->size;
+ }
+ }
+
+ return true; /* not matching, skip validation */
+}
+
+bool snd_usb_validate_audio_desc(void *p, int protocol)
+{
+ return validate_desc(p, protocol, audio_validators);
+}
+
+bool snd_usb_validate_midi_desc(void *p)
+{
+ return validate_desc(p, UAC_VERSION_1, midi_validators);
+}
+
From: Tariq Toukan <[email protected]>
[ Upstream commit 61ea02d2c13106116c6e4916ac5d9dd41151c959 ]
The completion queue consumer index increments upon a call to
mlx5_cqwq_pop().
When dumping an error CQE, the index is already incremented.
Decrease one for the print command.
Fixes: 16cc14d81733 ("net/mlx5e: Dump xmit error completions")
Signed-off-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
index 4eebf7946aca1..d5d2b1af3dbcc 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
@@ -404,7 +404,10 @@ netdev_tx_t mlx5e_xmit(struct sk_buff *skb, struct net_device *dev)
static void mlx5e_dump_error_cqe(struct mlx5e_txqsq *sq,
struct mlx5_err_cqe *err_cqe)
{
- u32 ci = mlx5_cqwq_get_ci(&sq->cq.wq);
+ struct mlx5_cqwq *wq = &sq->cq.wq;
+ u32 ci;
+
+ ci = mlx5_cqwq_ctr2ix(wq, wq->cc - 1);
netdev_err(sq->channel->netdev,
"Error cqe on cqn 0x%x, ci 0x%x, sqn 0x%x, opcode 0x%x, syndrome 0x%x, vendor syndrome 0x%x\n",
--
2.20.1
From: Ursula Braun <[email protected]>
[ Upstream commit 98f3375505b8d6517bd6710bc6d4f6289eeb30aa ]
If a pnet table entry is to be added mentioning a valid ethernet
interface, but an invalid infiniband or ISM device, the dev_put()
operation for the ethernet interface is called twice, resulting
in a negative refcount for the ethernet interface, which disables
removal of such a network interface.
This patch removes one of the dev_put() calls.
Fixes: 890a2cb4a966 ("net/smc: rework pnet table")
Signed-off-by: Ursula Braun <[email protected]>
Signed-off-by: Karsten Graul <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/smc/smc_pnet.c | 2 --
1 file changed, 2 deletions(-)
--- a/net/smc/smc_pnet.c
+++ b/net/smc/smc_pnet.c
@@ -376,8 +376,6 @@ static int smc_pnet_fill_entry(struct ne
return 0;
error:
- if (pnetelem->ndev)
- dev_put(pnetelem->ndev);
return rc;
}
From: Mel Gorman <[email protected]>
commit 3e8fc0075e24338b1117cdff6a79477427b8dbed upstream.
Deferred memory initialisation updates zone->managed_pages during the
initialisation phase but before that finishes, the per-cpu page
allocator (pcpu) calculates the number of pages allocated/freed in
batches as well as the maximum number of pages allowed on a per-cpu
list. As zone->managed_pages is not up to date yet, the pcpu
initialisation calculates inappropriately low batch and high values.
This increases zone lock contention quite severely in some cases with
the degree of severity depending on how many CPUs share a local zone and
the size of the zone. A private report indicated that kernel build
times were excessive with extremely high system CPU usage. A perf
profile indicated that a large chunk of time was lost on zone->lock
contention.
This patch recalculates the pcpu batch and high values after deferred
initialisation completes for every populated zone in the system. It was
tested on a 2-socket AMD EPYC 2 machine using a kernel compilation
workload -- allmodconfig and all available CPUs.
mmtests configuration: config-workload-kernbench-max Configuration was
modified to build on a fresh XFS partition.
kernbench
5.4.0-rc3 5.4.0-rc3
vanilla resetpcpu-v2
Amean user-256 13249.50 ( 0.00%) 16401.31 * -23.79%*
Amean syst-256 14760.30 ( 0.00%) 4448.39 * 69.86%*
Amean elsp-256 162.42 ( 0.00%) 119.13 * 26.65%*
Stddev user-256 42.97 ( 0.00%) 19.15 ( 55.43%)
Stddev syst-256 336.87 ( 0.00%) 6.71 ( 98.01%)
Stddev elsp-256 2.46 ( 0.00%) 0.39 ( 84.03%)
5.4.0-rc3 5.4.0-rc3
vanilla resetpcpu-v2
Duration User 39766.24 49221.79
Duration System 44298.10 13361.67
Duration Elapsed 519.11 388.87
The patch reduces system CPU usage by 69.86% and total build time by
26.65%. The variance of system CPU usage is also much reduced.
Before, this was the breakdown of batch and high values over all zones
was:
256 batch: 1
256 batch: 63
512 batch: 7
256 high: 0
256 high: 378
512 high: 42
512 pcpu pagesets had a batch limit of 7 and a high limit of 42. After
the patch:
256 batch: 1
768 batch: 63
256 high: 0
768 high: 378
[[email protected]: fix merge/linkage snafu]
Link: http://lkml.kernel.org/r/[email protected]: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mel Gorman <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Cc: Matt Fleming <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Qian Cai <[email protected]>
Cc: <[email protected]> [4.1+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/page_alloc.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1947,6 +1947,14 @@ void __init page_alloc_init_late(void)
wait_for_completion(&pgdat_init_all_done_comp);
/*
+ * The number of managed pages has changed due to the initialisation
+ * so the pcpu batch and high limits needs to be updated or the limits
+ * will be artificially small.
+ */
+ for_each_populated_zone(zone)
+ zone_pcp_update(zone);
+
+ /*
* We initialized the rest of the deferred pages. Permanently disable
* on-demand struct page initialization.
*/
@@ -8479,7 +8487,6 @@ void free_contig_range(unsigned long pfn
WARN(count != 0, "%d pages are still in use!\n", count);
}
-#ifdef CONFIG_MEMORY_HOTPLUG
/*
* The zone indicated has a new number of managed_pages; batch sizes and percpu
* page high values need to be recalulated.
@@ -8493,7 +8500,6 @@ void __meminit zone_pcp_update(struct zo
per_cpu_ptr(zone->pageset, cpu));
mutex_unlock(&pcp_batch_high_lock);
}
-#endif
void zone_pcp_reset(struct zone *zone)
{
From: Hillf Danton <[email protected]>
[ Upstream commit 9464cc37f3671ee69cb1c00662b5e1f113a96b23 ]
syzbot found the following crash on:
HEAD commit: 1e78030e Merge tag 'mmc-v5.3-rc1' of git://git.kernel.org/..
git tree: upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=148d3d1a600000
kernel config: https://syzkaller.appspot.com/x/.config?x=30cef20daf3e9977
dashboard link: https://syzkaller.appspot.com/bug?extid=13210896153522fe1ee5
compiler: gcc (GCC) 9.0.0 20181231 (experimental)
syz repro: https://syzkaller.appspot.com/x/repro.syz?x=136aa8c4600000
C reproducer: https://syzkaller.appspot.com/x/repro.c?x=109ba792600000
=====================================================================
BUG: memory leak
unreferenced object 0xffff8881207e4100 (size 128):
comm "syz-executor032", pid 7014, jiffies 4294944027 (age 13.830s)
hex dump (first 32 bytes):
00 70 16 18 81 88 ff ff 80 af 8c 22 81 88 ff ff .p........."....
00 b6 23 17 81 88 ff ff 00 00 00 00 00 00 00 00 ..#.............
backtrace:
[<000000000eb78212>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
[<000000000eb78212>] slab_post_alloc_hook mm/slab.h:522 [inline]
[<000000000eb78212>] slab_alloc mm/slab.c:3319 [inline]
[<000000000eb78212>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548
[<00000000006ea6c6>] kmalloc include/linux/slab.h:552 [inline]
[<00000000006ea6c6>] kzalloc include/linux/slab.h:748 [inline]
[<00000000006ea6c6>] ovs_vport_alloc+0x37/0xf0 net/openvswitch/vport.c:130
[<00000000f9a04a7d>] internal_dev_create+0x24/0x1d0 net/openvswitch/vport-internal_dev.c:164
[<0000000056ee7c13>] ovs_vport_add+0x81/0x190 net/openvswitch/vport.c:199
[<000000005434efc7>] new_vport+0x19/0x80 net/openvswitch/datapath.c:194
[<00000000b7b253f1>] ovs_dp_cmd_new+0x22f/0x410 net/openvswitch/datapath.c:1614
[<00000000e0988518>] genl_family_rcv_msg+0x2ab/0x5b0 net/netlink/genetlink.c:629
[<00000000d0cc9347>] genl_rcv_msg+0x54/0x9c net/netlink/genetlink.c:654
[<000000006694b647>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477
[<0000000088381f37>] genl_rcv+0x29/0x40 net/netlink/genetlink.c:665
[<00000000dad42a47>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
[<00000000dad42a47>] netlink_unicast+0x1ec/0x2d0 net/netlink/af_netlink.c:1328
[<0000000067e6b079>] netlink_sendmsg+0x270/0x480 net/netlink/af_netlink.c:1917
[<00000000aab08a47>] sock_sendmsg_nosec net/socket.c:637 [inline]
[<00000000aab08a47>] sock_sendmsg+0x54/0x70 net/socket.c:657
[<000000004cb7c11d>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2311
[<00000000c4901c63>] __sys_sendmsg+0x80/0xf0 net/socket.c:2356
[<00000000c10abb2d>] __do_sys_sendmsg net/socket.c:2365 [inline]
[<00000000c10abb2d>] __se_sys_sendmsg net/socket.c:2363 [inline]
[<00000000c10abb2d>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2363
BUG: memory leak
unreferenced object 0xffff88811723b600 (size 64):
comm "syz-executor032", pid 7014, jiffies 4294944027 (age 13.830s)
hex dump (first 32 bytes):
01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 02 00 00 00 05 35 82 c1 .............5..
backtrace:
[<00000000352f46d8>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
[<00000000352f46d8>] slab_post_alloc_hook mm/slab.h:522 [inline]
[<00000000352f46d8>] slab_alloc mm/slab.c:3319 [inline]
[<00000000352f46d8>] __do_kmalloc mm/slab.c:3653 [inline]
[<00000000352f46d8>] __kmalloc+0x169/0x300 mm/slab.c:3664
[<000000008e48f3d1>] kmalloc include/linux/slab.h:557 [inline]
[<000000008e48f3d1>] ovs_vport_set_upcall_portids+0x54/0xd0 net/openvswitch/vport.c:343
[<00000000541e4f4a>] ovs_vport_alloc+0x7f/0xf0 net/openvswitch/vport.c:139
[<00000000f9a04a7d>] internal_dev_create+0x24/0x1d0 net/openvswitch/vport-internal_dev.c:164
[<0000000056ee7c13>] ovs_vport_add+0x81/0x190 net/openvswitch/vport.c:199
[<000000005434efc7>] new_vport+0x19/0x80 net/openvswitch/datapath.c:194
[<00000000b7b253f1>] ovs_dp_cmd_new+0x22f/0x410 net/openvswitch/datapath.c:1614
[<00000000e0988518>] genl_family_rcv_msg+0x2ab/0x5b0 net/netlink/genetlink.c:629
[<00000000d0cc9347>] genl_rcv_msg+0x54/0x9c net/netlink/genetlink.c:654
[<000000006694b647>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477
[<0000000088381f37>] genl_rcv+0x29/0x40 net/netlink/genetlink.c:665
[<00000000dad42a47>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
[<00000000dad42a47>] netlink_unicast+0x1ec/0x2d0 net/netlink/af_netlink.c:1328
[<0000000067e6b079>] netlink_sendmsg+0x270/0x480 net/netlink/af_netlink.c:1917
[<00000000aab08a47>] sock_sendmsg_nosec net/socket.c:637 [inline]
[<00000000aab08a47>] sock_sendmsg+0x54/0x70 net/socket.c:657
[<000000004cb7c11d>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2311
[<00000000c4901c63>] __sys_sendmsg+0x80/0xf0 net/socket.c:2356
BUG: memory leak
unreferenced object 0xffff8881228ca500 (size 128):
comm "syz-executor032", pid 7015, jiffies 4294944622 (age 7.880s)
hex dump (first 32 bytes):
00 f0 27 18 81 88 ff ff 80 ac 8c 22 81 88 ff ff ..'........"....
40 b7 23 17 81 88 ff ff 00 00 00 00 00 00 00 00 @.#.............
backtrace:
[<000000000eb78212>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
[<000000000eb78212>] slab_post_alloc_hook mm/slab.h:522 [inline]
[<000000000eb78212>] slab_alloc mm/slab.c:3319 [inline]
[<000000000eb78212>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548
[<00000000006ea6c6>] kmalloc include/linux/slab.h:552 [inline]
[<00000000006ea6c6>] kzalloc include/linux/slab.h:748 [inline]
[<00000000006ea6c6>] ovs_vport_alloc+0x37/0xf0 net/openvswitch/vport.c:130
[<00000000f9a04a7d>] internal_dev_create+0x24/0x1d0 net/openvswitch/vport-internal_dev.c:164
[<0000000056ee7c13>] ovs_vport_add+0x81/0x190 net/openvswitch/vport.c:199
[<000000005434efc7>] new_vport+0x19/0x80 net/openvswitch/datapath.c:194
[<00000000b7b253f1>] ovs_dp_cmd_new+0x22f/0x410 net/openvswitch/datapath.c:1614
[<00000000e0988518>] genl_family_rcv_msg+0x2ab/0x5b0 net/netlink/genetlink.c:629
[<00000000d0cc9347>] genl_rcv_msg+0x54/0x9c net/netlink/genetlink.c:654
[<000000006694b647>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477
[<0000000088381f37>] genl_rcv+0x29/0x40 net/netlink/genetlink.c:665
[<00000000dad42a47>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
[<00000000dad42a47>] netlink_unicast+0x1ec/0x2d0 net/netlink/af_netlink.c:1328
[<0000000067e6b079>] netlink_sendmsg+0x270/0x480 net/netlink/af_netlink.c:1917
[<00000000aab08a47>] sock_sendmsg_nosec net/socket.c:637 [inline]
[<00000000aab08a47>] sock_sendmsg+0x54/0x70 net/socket.c:657
[<000000004cb7c11d>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2311
[<00000000c4901c63>] __sys_sendmsg+0x80/0xf0 net/socket.c:2356
[<00000000c10abb2d>] __do_sys_sendmsg net/socket.c:2365 [inline]
[<00000000c10abb2d>] __se_sys_sendmsg net/socket.c:2363 [inline]
[<00000000c10abb2d>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2363
=====================================================================
The function in net core, register_netdevice(), may fail with vport's
destruction callback either invoked or not. After commit 309b66970ee2
("net: openvswitch: do not free vport if register_netdevice() is failed."),
the duty to destroy vport is offloaded from the driver OTOH, which ends
up in the memory leak reported.
It is fixed by releasing vport unless device is registered successfully.
To do that, the callback assignment is defered until device is registered.
Reported-by: [email protected]
Fixes: 309b66970ee2 ("net: openvswitch: do not free vport if register_netdevice() is failed.")
Cc: Taehee Yoo <[email protected]>
Cc: Greg Rose <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Marcelo Ricardo Leitner <[email protected]>
Cc: Ying Xue <[email protected]>
Cc: Andrey Konovalov <[email protected]>
Signed-off-by: Hillf Danton <[email protected]>
Acked-by: Pravin B Shelar <[email protected]>
[sbrivio: this was sent to [email protected] and never made its way
to netdev -- resending original patch]
Signed-off-by: Stefano Brivio <[email protected]>
Reviewed-by: Greg Rose <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/openvswitch/vport-internal_dev.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/net/openvswitch/vport-internal_dev.c b/net/openvswitch/vport-internal_dev.c
index d2437b5b2f6ad..baa33103108a5 100644
--- a/net/openvswitch/vport-internal_dev.c
+++ b/net/openvswitch/vport-internal_dev.c
@@ -137,7 +137,7 @@ static void do_setup(struct net_device *netdev)
netdev->priv_flags |= IFF_LIVE_ADDR_CHANGE | IFF_OPENVSWITCH |
IFF_NO_QUEUE;
netdev->needs_free_netdev = true;
- netdev->priv_destructor = internal_dev_destructor;
+ netdev->priv_destructor = NULL;
netdev->ethtool_ops = &internal_dev_ethtool_ops;
netdev->rtnl_link_ops = &internal_dev_link_ops;
@@ -159,7 +159,6 @@ static struct vport *internal_dev_create(const struct vport_parms *parms)
struct internal_dev *internal_dev;
struct net_device *dev;
int err;
- bool free_vport = true;
vport = ovs_vport_alloc(0, &ovs_internal_vport_ops, parms);
if (IS_ERR(vport)) {
@@ -190,10 +189,9 @@ static struct vport *internal_dev_create(const struct vport_parms *parms)
rtnl_lock();
err = register_netdevice(vport->dev);
- if (err) {
- free_vport = false;
+ if (err)
goto error_unlock;
- }
+ vport->dev->priv_destructor = internal_dev_destructor;
dev_set_promiscuity(vport->dev, 1);
rtnl_unlock();
@@ -207,8 +205,7 @@ error_unlock:
error_free_netdev:
free_netdev(dev);
error_free_vport:
- if (free_vport)
- ovs_vport_free(vport);
+ ovs_vport_free(vport);
error:
return ERR_PTR(err);
}
--
2.20.1
From: Srinivas Pandruvada <[email protected]>
commit c31432fa7f825de0e19838f1ac7746381c509ec4 upstream.
The max value of EPB can only be 0x0F. Attempting to set more than that
triggers an "unchecked MSR access error" warning which happens in
intel_pstate_hwp_force_min_perf() called via cpufreq stop_cpu().
However, it is not even necessary to touch the EPB from intel_pstate,
because it is restored on every CPU online by the intel_epb.c code,
so let that code do the right thing and drop the redundant (and
incorrect) EPB update from intel_pstate.
Fixes: af3b7379e2d70 ("cpufreq: intel_pstate: Force HWP min perf before offline")
Reported-by: Qian Cai <[email protected]>
Cc: 5.2+ <[email protected]> # 5.2+
Signed-off-by: Srinivas Pandruvada <[email protected]>
[ rjw: Changelog ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/cpufreq/intel_pstate.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -846,11 +846,9 @@ static void intel_pstate_hwp_force_min_p
value |= HWP_MAX_PERF(min_perf);
value |= HWP_MIN_PERF(min_perf);
- /* Set EPP/EPB to min */
+ /* Set EPP to min */
if (boot_cpu_has(X86_FEATURE_HWP_EPP))
value |= HWP_ENERGY_PERF_PREFERENCE(HWP_EPP_POWERSAVE);
- else
- intel_pstate_set_epb(cpu, HWP_EPP_BALANCE_POWERSAVE);
wrmsrl_on_cpu(cpu, MSR_HWP_REQUEST, value);
}
From: Jiada Wang <[email protected]>
commit d10be65f87fc9d98ad3cbdc406e86745fe8c59e2 upstream.
Currently each SSI unit's busif dma address is calculated by
following calculation formula:
0xec540000 + 0x1000 * id + busif / 4 * 0xA000 + busif % 4 * 0x400
But according to R-Car3 HW manual 41.1.4 Register Configuration,
ssi9 4/5/6/7 busif data register address
(SSI9_4_BUSIF/SSI9_5_BUSIF/SSI9_6_BUSIF/SSI9_7_BUSIF)
are out of this rule.
This patch updates the calculation formula to correct
ssi9 4/5/6/7 busif data register address.
Fixes: 5e45a6fab3b9 ("ASoc: rsnd: dma: Calculate dma address with consider of BUSIF")
Signed-off-by: Jiada Wang <[email protected]>
Signed-off-by: Timo Wischer <[email protected]>
[erosca: minor improvements in commit description]
Cc: Andrew Gabbasov <[email protected]>
Cc: [email protected] # v4.20+
Signed-off-by: Eugeniu Rosca <[email protected]>
Acked-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/sh/rcar/dma.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/soc/sh/rcar/dma.c
+++ b/sound/soc/sh/rcar/dma.c
@@ -508,10 +508,10 @@ static struct rsnd_mod_ops rsnd_dmapp_op
#define RDMA_SSI_I_N(addr, i) (addr ##_reg - 0x00300000 + (0x40 * i) + 0x8)
#define RDMA_SSI_O_N(addr, i) (addr ##_reg - 0x00300000 + (0x40 * i) + 0xc)
-#define RDMA_SSIU_I_N(addr, i, j) (addr ##_reg - 0x00441000 + (0x1000 * (i)) + (((j) / 4) * 0xA000) + (((j) % 4) * 0x400))
+#define RDMA_SSIU_I_N(addr, i, j) (addr ##_reg - 0x00441000 + (0x1000 * (i)) + (((j) / 4) * 0xA000) + (((j) % 4) * 0x400) - (0x4000 * ((i) / 9) * ((j) / 4)))
#define RDMA_SSIU_O_N(addr, i, j) RDMA_SSIU_I_N(addr, i, j)
-#define RDMA_SSIU_I_P(addr, i, j) (addr ##_reg - 0x00141000 + (0x1000 * (i)) + (((j) / 4) * 0xA000) + (((j) % 4) * 0x400))
+#define RDMA_SSIU_I_P(addr, i, j) (addr ##_reg - 0x00141000 + (0x1000 * (i)) + (((j) / 4) * 0xA000) + (((j) % 4) * 0x400) - (0x4000 * ((i) / 9) * ((j) / 4)))
#define RDMA_SSIU_O_P(addr, i, j) RDMA_SSIU_I_P(addr, i, j)
#define RDMA_SRC_I_N(addr, i) (addr ##_reg - 0x00500000 + (0x400 * i))
From: Catalin Marinas <[email protected]>
commit 6767df245f4736d0cf0c6fb7cf9cf94b27414245 upstream.
Following commit 73e86cb03cf2 ("arm64: Move PTE_RDONLY bit handling out
of set_pte_at()"), the PTE_RDONLY bit is no longer managed by
set_pte_at() but built into the PAGE_* attribute definitions.
Consequently, pte_same() must include this bit when checking two PTEs
for equality.
Remove the arm64-specific pte_same() function, practically reverting
commit 747a70e60b72 ("arm64: Fix copy-on-write referencing in HugeTLB")
Fixes: 73e86cb03cf2 ("arm64: Move PTE_RDONLY bit handling out of set_pte_at()")
Cc: <[email protected]> # 4.14.x-
Cc: Will Deacon <[email protected]>
Cc: Steve Capper <[email protected]>
Reported-by: John Stultz <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/include/asm/pgtable.h | 17 -----------------
1 file changed, 17 deletions(-)
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -283,23 +283,6 @@ static inline void set_pte_at(struct mm_
set_pte(ptep, pte);
}
-#define __HAVE_ARCH_PTE_SAME
-static inline int pte_same(pte_t pte_a, pte_t pte_b)
-{
- pteval_t lhs, rhs;
-
- lhs = pte_val(pte_a);
- rhs = pte_val(pte_b);
-
- if (pte_present(pte_a))
- lhs &= ~PTE_RDONLY;
-
- if (pte_present(pte_b))
- rhs &= ~PTE_RDONLY;
-
- return (lhs == rhs);
-}
-
/*
* Huge pte definitions.
*/
From: Parav Pandit <[email protected]>
[ Upstream commit 777a8b32bc0f9bb25848a025f72a9febc30d9033 ]
Current code tries to derive VLAN ID and compares it with GID
attribute for matching entry. This raw search fails on macvlan
netdevice as its not a VLAN device, but its an upper device of a VLAN
netdevice.
Due to this limitation, incoming QP1 packets fail to match in the
GID table. Such packets are dropped.
Hence, to support it, use the existing rdma_read_gid_l2_fields()
that takes care of diffferent device types.
Fixes: dbf727de7440 ("IB/core: Use GID table in AH creation and dmac resolution")
Signed-off-by: Parav Pandit <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/verbs.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c
index 92349bf37589f..5b1dc11a72838 100644
--- a/drivers/infiniband/core/verbs.c
+++ b/drivers/infiniband/core/verbs.c
@@ -662,16 +662,17 @@ static bool find_gid_index(const union ib_gid *gid,
void *context)
{
struct find_gid_index_context *ctx = context;
+ u16 vlan_id = 0xffff;
+ int ret;
if (ctx->gid_type != gid_attr->gid_type)
return false;
- if ((!!(ctx->vlan_id != 0xffff) == !is_vlan_dev(gid_attr->ndev)) ||
- (is_vlan_dev(gid_attr->ndev) &&
- vlan_dev_vlan_id(gid_attr->ndev) != ctx->vlan_id))
+ ret = rdma_read_gid_l2_fields(gid_attr, &vlan_id, NULL);
+ if (ret)
return false;
- return true;
+ return ctx->vlan_id == vlan_id;
}
static const struct ib_gid_attr *
--
2.20.1
From: Takashi Sakamoto <[email protected]>
commit 706ad6746a66546daf96d4e4a95e46faf6cf689a upstream.
For Focusrite Saffire Pro i/o, the lowest 8 bits of register represents
configured source of sampling clock. The next lowest 8 bits represents
whether the configured source is actually detected or not just after
the register is changed for the source.
Current implementation evaluates whole the register to detect configured
source. This results in failure due to the next lowest 8 bits when the
source is connected in advance.
This commit fixes the bug.
Fixes: 25784ec2d034 ("ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series")
Cc: <[email protected]> # v3.16+
Signed-off-by: Takashi Sakamoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/firewire/bebob/bebob_focusrite.c | 3 +++
1 file changed, 3 insertions(+)
--- a/sound/firewire/bebob/bebob_focusrite.c
+++ b/sound/firewire/bebob/bebob_focusrite.c
@@ -27,6 +27,8 @@
#define SAFFIRE_CLOCK_SOURCE_SPDIF 1
/* clock sources as returned from register of Saffire Pro 10 and 26 */
+#define SAFFIREPRO_CLOCK_SOURCE_SELECT_MASK 0x000000ff
+#define SAFFIREPRO_CLOCK_SOURCE_DETECT_MASK 0x0000ff00
#define SAFFIREPRO_CLOCK_SOURCE_INTERNAL 0
#define SAFFIREPRO_CLOCK_SOURCE_SKIP 1 /* never used on hardware */
#define SAFFIREPRO_CLOCK_SOURCE_SPDIF 2
@@ -189,6 +191,7 @@ saffirepro_both_clk_src_get(struct snd_b
map = saffirepro_clk_maps[1];
/* In a case that this driver cannot handle the value of register. */
+ value &= SAFFIREPRO_CLOCK_SOURCE_SELECT_MASK;
if (value >= SAFFIREPRO_CLOCK_SOURCE_COUNT || map[value] < 0) {
err = -EIO;
goto end;
From: Shuah Khan <[email protected]>
commit 4a6a6f5c4aeedb72db871d60bfcca89835f317aa upstream.
make TARGETS=gpio kselftest fails with:
Makefile:23: tools/build/Makefile.include: No such file or directory
When the gpio tool make is invoked from tools Makefile, srctree is
cleared and the current logic check for srctree equals to empty
string to determine srctree location from CURDIR.
When the build in invoked from selftests/gpio Makefile, the srctree
is set to "." and the same logic used for srctree equals to empty is
needed to determine srctree.
Check building_out_of_srctree undefined as the condition for both
cases to fix "make TARGETS=gpio kselftest" build failure.
Cc: [email protected]
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/gpio/Makefile | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/tools/gpio/Makefile
+++ b/tools/gpio/Makefile
@@ -3,7 +3,11 @@ include ../scripts/Makefile.include
bindir ?= /usr/bin
-ifeq ($(srctree),)
+# This will work when gpio is built in tools env. where srctree
+# isn't set and when invoked from selftests build, where srctree
+# is set to ".". building_out_of_srctree is undefined for in srctree
+# builds
+ifndef building_out_of_srctree
srctree := $(patsubst %/,%,$(dir $(CURDIR)))
srctree := $(patsubst %/,%,$(dir $(srctree)))
endif
From: Suwan Kim <[email protected]>
commit ea44d190764b4422af4d1c29eaeb9e69e353b406 upstream.
There are bugs on vhci with usb 3.0 storage device. In USB, each SG
list entry buffer should be divisible by the bulk max packet size.
But with native SG support, this problem doesn't matter because the
SG buffer is treated as contiguous buffer. But without native SG
support, USB storage driver breaks SG list into several URBs and the
error occurs because of a buffer size of URB that cannot be divided
by the bulk max packet size. The error situation is as follows.
When USB Storage driver requests 31.5 KB data and has SG list which
has 3584 bytes buffer followed by 7 4096 bytes buffer for some
reason. USB Storage driver splits this SG list into several URBs
because VHCI doesn't support SG and sends them separately. So the
first URB buffer size is 3584 bytes. When receiving data from device,
USB 3.0 device sends data packet of 1024 bytes size because the max
packet size of BULK pipe is 1024 bytes. So device sends 4096 bytes.
But the first URB buffer has only 3584 bytes buffer size. So host
controller terminates the transfer even though there is more data to
receive. So, vhci needs to support SG transfer to prevent this error.
In this patch, vhci supports SG regardless of whether the server's
host controller supports SG or not, because stub driver splits SG
list into several URBs if the server's host controller doesn't
support SG.
To support SG, vhci sets URB_DMA_MAP_SG flag in urb->transfer_flags
if URB has SG list and this flag will tell stub driver to use SG
list. After receiving urb from stub driver, vhci clear URB_DMA_MAP_SG
flag to avoid unnecessary DMA unmapping in HCD.
vhci sends each SG list entry to stub driver. Then, stub driver sees
the total length of the buffer and allocates SG table and pages
according to the total buffer length calling sgl_alloc(). After stub
driver receives completed URB, it again sends each SG list entry to
vhci.
If the server's host controller doesn't support SG, stub driver
breaks a single SG request into several URBs and submits them to
the server's host controller. When all the split URBs are completed,
stub driver reassembles the URBs into a single return command and
sends it to vhci.
Moreover, in the situation where vhci supports SG, but stub driver
does not, or vice versa, usbip works normally. Because there is no
protocol modification, there is no problem in communication between
server and client even if the one has a kernel without SG support.
In the case of vhci supports SG and stub driver doesn't, because
vhci sends only the total length of the buffer to stub driver as
it did before the patch applied, stub driver only needs to allocate
the required length of buffers using only kmalloc() regardless of
whether vhci supports SG or not. But stub driver has to allocate
buffer with kmalloc() as much as the total length of SG buffer which
is quite huge when vhci sends SG request, so it has overhead in
buffer allocation in this situation.
If stub driver needs to send data buffer to vhci because of IN pipe,
stub driver also sends only total length of buffer as metadata and
then sends real data as vhci does. Then vhci receive data from stub
driver and store it to the corresponding buffer of SG list entry.
And for the case of stub driver supports SG and vhci doesn't, since
the USB storage driver checks that vhci doesn't support SG and sends
the request to stub driver by splitting the SG list into multiple
URBs, stub driver allocates a buffer for each URB with kmalloc() as
it did before this patch.
* Test environment
Test uses two difference machines and two different kernel version
to make mismatch situation between the client and the server where
vhci supports SG, but stub driver does not, or vice versa. All tests
are conducted in both full SG support that both vhci and stub support
SG and half SG support that is the mismatch situation. Test kernel
version is 5.3-rc6 with commit "usb: add a HCD_DMA flag instead of
guestimating DMA capabilities" to avoid unnecessary DMA mapping and
unmapping.
- Test kernel version
- 5.3-rc6 with SG support
- 5.1.20-200.fc29.x86_64 without SG support
* SG support test
- Test devices
- Super-speed storage device - SanDisk Ultra USB 3.0
- High-speed storage device - SMI corporation USB 2.0 flash drive
- Test description
Test read and write operation of mass storage device that uses the
BULK transfer. In test, the client reads and writes files whose size
is over 1G and it works normally.
* Regression test
- Test devices
- Super-speed device - Logitech Brio webcam
- High-speed device - Logitech C920 HD Pro webcam
- Full-speed device - Logitech bluetooth mouse
- Britz BR-Orion speaker
- Low-speed device - Logitech wired mouse
- Test description
Moving and click test for mouse. To test the webcam, use gnome-cheese.
To test the speaker, play music and video on the client. All works
normally.
* VUDC compatibility test
VUDC also works well with this patch. Tests are done with two USB
gadget created by CONFIGFS USB gadget. Both use the BULK pipe.
1. Serial gadget
2. Mass storage gadget
- Serial gadget test
Serial gadget on the host sends and receives data using cat command
on the /dev/ttyGS<N>. The client uses minicom to communicate with
the serial gadget.
- Mass storage gadget test
After connecting the gadget with vhci, use "dd" to test read and
write operation on the client side.
Read - dd if=/dev/sd<N> iflag=direct of=/dev/null bs=1G count=1
Write - dd if=<my file path> iflag=direct of=/dev/sd<N> bs=1G count=1
Signed-off-by: Suwan Kim <[email protected]>
Acked-by: Shuah khan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/usbip/stub.h | 7 +
drivers/usb/usbip/stub_main.c | 57 ++++++++---
drivers/usb/usbip/stub_rx.c | 202 +++++++++++++++++++++++++++------------
drivers/usb/usbip/stub_tx.c | 99 ++++++++++++++-----
drivers/usb/usbip/usbip_common.c | 59 +++++++----
drivers/usb/usbip/vhci_hcd.c | 12 ++
drivers/usb/usbip/vhci_rx.c | 3
drivers/usb/usbip/vhci_tx.c | 66 ++++++++++--
8 files changed, 379 insertions(+), 126 deletions(-)
--- a/drivers/usb/usbip/stub.h
+++ b/drivers/usb/usbip/stub.h
@@ -52,7 +52,11 @@ struct stub_priv {
unsigned long seqnum;
struct list_head list;
struct stub_device *sdev;
- struct urb *urb;
+ struct urb **urbs;
+ struct scatterlist *sgl;
+ int num_urbs;
+ int completed_urbs;
+ int urb_status;
int unlinking;
};
@@ -86,6 +90,7 @@ extern struct usb_device_driver stub_dri
struct bus_id_priv *get_busid_priv(const char *busid);
void put_busid_priv(struct bus_id_priv *bid);
int del_match_busid(char *busid);
+void stub_free_priv_and_urb(struct stub_priv *priv);
void stub_device_cleanup_urbs(struct stub_device *sdev);
/* stub_rx.c */
--- a/drivers/usb/usbip/stub_main.c
+++ b/drivers/usb/usbip/stub_main.c
@@ -6,6 +6,7 @@
#include <linux/string.h>
#include <linux/module.h>
#include <linux/device.h>
+#include <linux/scatterlist.h>
#include "usbip_common.h"
#include "stub.h"
@@ -281,13 +282,49 @@ static struct stub_priv *stub_priv_pop_f
struct stub_priv *priv, *tmp;
list_for_each_entry_safe(priv, tmp, listhead, list) {
- list_del(&priv->list);
+ list_del_init(&priv->list);
return priv;
}
return NULL;
}
+void stub_free_priv_and_urb(struct stub_priv *priv)
+{
+ struct urb *urb;
+ int i;
+
+ for (i = 0; i < priv->num_urbs; i++) {
+ urb = priv->urbs[i];
+
+ if (!urb)
+ return;
+
+ kfree(urb->setup_packet);
+ urb->setup_packet = NULL;
+
+
+ if (urb->transfer_buffer && !priv->sgl) {
+ kfree(urb->transfer_buffer);
+ urb->transfer_buffer = NULL;
+ }
+
+ if (urb->num_sgs) {
+ sgl_free(urb->sg);
+ urb->sg = NULL;
+ urb->num_sgs = 0;
+ }
+
+ usb_free_urb(urb);
+ }
+ if (!list_empty(&priv->list))
+ list_del(&priv->list);
+ if (priv->sgl)
+ sgl_free(priv->sgl);
+ kfree(priv->urbs);
+ kmem_cache_free(stub_priv_cache, priv);
+}
+
static struct stub_priv *stub_priv_pop(struct stub_device *sdev)
{
unsigned long flags;
@@ -314,25 +351,15 @@ done:
void stub_device_cleanup_urbs(struct stub_device *sdev)
{
struct stub_priv *priv;
- struct urb *urb;
+ int i;
dev_dbg(&sdev->udev->dev, "Stub device cleaning up urbs\n");
while ((priv = stub_priv_pop(sdev))) {
- urb = priv->urb;
- dev_dbg(&sdev->udev->dev, "free urb seqnum %lu\n",
- priv->seqnum);
- usb_kill_urb(urb);
-
- kmem_cache_free(stub_priv_cache, priv);
+ for (i = 0; i < priv->num_urbs; i++)
+ usb_kill_urb(priv->urbs[i]);
- kfree(urb->transfer_buffer);
- urb->transfer_buffer = NULL;
-
- kfree(urb->setup_packet);
- urb->setup_packet = NULL;
-
- usb_free_urb(urb);
+ stub_free_priv_and_urb(priv);
}
}
--- a/drivers/usb/usbip/stub_rx.c
+++ b/drivers/usb/usbip/stub_rx.c
@@ -7,6 +7,7 @@
#include <linux/kthread.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
+#include <linux/scatterlist.h>
#include "usbip_common.h"
#include "stub.h"
@@ -201,7 +202,7 @@ static void tweak_special_requests(struc
static int stub_recv_cmd_unlink(struct stub_device *sdev,
struct usbip_header *pdu)
{
- int ret;
+ int ret, i;
unsigned long flags;
struct stub_priv *priv;
@@ -246,12 +247,14 @@ static int stub_recv_cmd_unlink(struct s
* so a driver in a client host will know the failure
* of the unlink request ?
*/
- ret = usb_unlink_urb(priv->urb);
- if (ret != -EINPROGRESS)
- dev_err(&priv->urb->dev->dev,
- "failed to unlink a urb # %lu, ret %d\n",
- priv->seqnum, ret);
-
+ for (i = priv->completed_urbs; i < priv->num_urbs; i++) {
+ ret = usb_unlink_urb(priv->urbs[i]);
+ if (ret != -EINPROGRESS)
+ dev_err(&priv->urbs[i]->dev->dev,
+ "failed to unlink %d/%d urb of seqnum %lu, ret %d\n",
+ i + 1, priv->num_urbs,
+ priv->seqnum, ret);
+ }
return 0;
}
@@ -433,14 +436,36 @@ static void masking_bogus_flags(struct u
urb->transfer_flags &= allowed;
}
+static int stub_recv_xbuff(struct usbip_device *ud, struct stub_priv *priv)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < priv->num_urbs; i++) {
+ ret = usbip_recv_xbuff(ud, priv->urbs[i]);
+ if (ret < 0)
+ break;
+ }
+
+ return ret;
+}
+
static void stub_recv_cmd_submit(struct stub_device *sdev,
struct usbip_header *pdu)
{
- int ret;
struct stub_priv *priv;
struct usbip_device *ud = &sdev->ud;
struct usb_device *udev = sdev->udev;
+ struct scatterlist *sgl = NULL, *sg;
+ void *buffer = NULL;
+ unsigned long long buf_len;
+ int nents;
+ int num_urbs = 1;
int pipe = get_pipe(sdev, pdu);
+ int use_sg = pdu->u.cmd_submit.transfer_flags & URB_DMA_MAP_SG;
+ int support_sg = 1;
+ int np = 0;
+ int ret, i;
if (pipe == -1)
return;
@@ -449,76 +474,139 @@ static void stub_recv_cmd_submit(struct
if (!priv)
return;
- /* setup a urb */
- if (usb_pipeisoc(pipe))
- priv->urb = usb_alloc_urb(pdu->u.cmd_submit.number_of_packets,
- GFP_KERNEL);
- else
- priv->urb = usb_alloc_urb(0, GFP_KERNEL);
+ buf_len = (unsigned long long)pdu->u.cmd_submit.transfer_buffer_length;
- if (!priv->urb) {
- usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
- return;
+ /* allocate urb transfer buffer, if needed */
+ if (buf_len) {
+ if (use_sg) {
+ sgl = sgl_alloc(buf_len, GFP_KERNEL, &nents);
+ if (!sgl)
+ goto err_malloc;
+ } else {
+ buffer = kzalloc(buf_len, GFP_KERNEL);
+ if (!buffer)
+ goto err_malloc;
+ }
}
- /* allocate urb transfer buffer, if needed */
- if (pdu->u.cmd_submit.transfer_buffer_length > 0) {
- priv->urb->transfer_buffer =
- kzalloc(pdu->u.cmd_submit.transfer_buffer_length,
- GFP_KERNEL);
- if (!priv->urb->transfer_buffer) {
+ /* Check if the server's HCD supports SG */
+ if (use_sg && !udev->bus->sg_tablesize) {
+ /*
+ * If the server's HCD doesn't support SG, break a single SG
+ * request into several URBs and map each SG list entry to
+ * corresponding URB buffer. The previously allocated SG
+ * list is stored in priv->sgl (If the server's HCD support SG,
+ * SG list is stored only in urb->sg) and it is used as an
+ * indicator that the server split single SG request into
+ * several URBs. Later, priv->sgl is used by stub_complete() and
+ * stub_send_ret_submit() to reassemble the divied URBs.
+ */
+ support_sg = 0;
+ num_urbs = nents;
+ priv->completed_urbs = 0;
+ pdu->u.cmd_submit.transfer_flags &= ~URB_DMA_MAP_SG;
+ }
+
+ /* allocate urb array */
+ priv->num_urbs = num_urbs;
+ priv->urbs = kmalloc_array(num_urbs, sizeof(*priv->urbs), GFP_KERNEL);
+ if (!priv->urbs)
+ goto err_urbs;
+
+ /* setup a urb */
+ if (support_sg) {
+ if (usb_pipeisoc(pipe))
+ np = pdu->u.cmd_submit.number_of_packets;
+
+ priv->urbs[0] = usb_alloc_urb(np, GFP_KERNEL);
+ if (!priv->urbs[0])
+ goto err_urb;
+
+ if (buf_len) {
+ if (use_sg) {
+ priv->urbs[0]->sg = sgl;
+ priv->urbs[0]->num_sgs = nents;
+ priv->urbs[0]->transfer_buffer = NULL;
+ } else {
+ priv->urbs[0]->transfer_buffer = buffer;
+ }
+ }
+
+ /* copy urb setup packet */
+ priv->urbs[0]->setup_packet = kmemdup(&pdu->u.cmd_submit.setup,
+ 8, GFP_KERNEL);
+ if (!priv->urbs[0]->setup_packet) {
usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
return;
}
- }
- /* copy urb setup packet */
- priv->urb->setup_packet = kmemdup(&pdu->u.cmd_submit.setup, 8,
- GFP_KERNEL);
- if (!priv->urb->setup_packet) {
- dev_err(&udev->dev, "allocate setup_packet\n");
- usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
- return;
+ usbip_pack_pdu(pdu, priv->urbs[0], USBIP_CMD_SUBMIT, 0);
+ } else {
+ for_each_sg(sgl, sg, nents, i) {
+ priv->urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
+ /* The URBs which is previously allocated will be freed
+ * in stub_device_cleanup_urbs() if error occurs.
+ */
+ if (!priv->urbs[i])
+ goto err_urb;
+
+ usbip_pack_pdu(pdu, priv->urbs[i], USBIP_CMD_SUBMIT, 0);
+ priv->urbs[i]->transfer_buffer = sg_virt(sg);
+ priv->urbs[i]->transfer_buffer_length = sg->length;
+ }
+ priv->sgl = sgl;
}
- /* set other members from the base header of pdu */
- priv->urb->context = (void *) priv;
- priv->urb->dev = udev;
- priv->urb->pipe = pipe;
- priv->urb->complete = stub_complete;
+ for (i = 0; i < num_urbs; i++) {
+ /* set other members from the base header of pdu */
+ priv->urbs[i]->context = (void *) priv;
+ priv->urbs[i]->dev = udev;
+ priv->urbs[i]->pipe = pipe;
+ priv->urbs[i]->complete = stub_complete;
- usbip_pack_pdu(pdu, priv->urb, USBIP_CMD_SUBMIT, 0);
+ /* no need to submit an intercepted request, but harmless? */
+ tweak_special_requests(priv->urbs[i]);
+ masking_bogus_flags(priv->urbs[i]);
+ }
- if (usbip_recv_xbuff(ud, priv->urb) < 0)
+ if (stub_recv_xbuff(ud, priv) < 0)
return;
- if (usbip_recv_iso(ud, priv->urb) < 0)
+ if (usbip_recv_iso(ud, priv->urbs[0]) < 0)
return;
- /* no need to submit an intercepted request, but harmless? */
- tweak_special_requests(priv->urb);
-
- masking_bogus_flags(priv->urb);
/* urb is now ready to submit */
- ret = usb_submit_urb(priv->urb, GFP_KERNEL);
-
- if (ret == 0)
- usbip_dbg_stub_rx("submit urb ok, seqnum %u\n",
- pdu->base.seqnum);
- else {
- dev_err(&udev->dev, "submit_urb error, %d\n", ret);
- usbip_dump_header(pdu);
- usbip_dump_urb(priv->urb);
+ for (i = 0; i < priv->num_urbs; i++) {
+ ret = usb_submit_urb(priv->urbs[i], GFP_KERNEL);
- /*
- * Pessimistic.
- * This connection will be discarded.
- */
- usbip_event_add(ud, SDEV_EVENT_ERROR_SUBMIT);
+ if (ret == 0)
+ usbip_dbg_stub_rx("submit urb ok, seqnum %u\n",
+ pdu->base.seqnum);
+ else {
+ dev_err(&udev->dev, "submit_urb error, %d\n", ret);
+ usbip_dump_header(pdu);
+ usbip_dump_urb(priv->urbs[i]);
+
+ /*
+ * Pessimistic.
+ * This connection will be discarded.
+ */
+ usbip_event_add(ud, SDEV_EVENT_ERROR_SUBMIT);
+ break;
+ }
}
usbip_dbg_stub_rx("Leave\n");
+ return;
+
+err_urb:
+ kfree(priv->urbs);
+err_urbs:
+ kfree(buffer);
+ sgl_free(sgl);
+err_malloc:
+ usbip_event_add(ud, SDEV_EVENT_ERROR_MALLOC);
}
/* recv a pdu */
--- a/drivers/usb/usbip/stub_tx.c
+++ b/drivers/usb/usbip/stub_tx.c
@@ -5,25 +5,11 @@
#include <linux/kthread.h>
#include <linux/socket.h>
+#include <linux/scatterlist.h>
#include "usbip_common.h"
#include "stub.h"
-static void stub_free_priv_and_urb(struct stub_priv *priv)
-{
- struct urb *urb = priv->urb;
-
- kfree(urb->setup_packet);
- urb->setup_packet = NULL;
-
- kfree(urb->transfer_buffer);
- urb->transfer_buffer = NULL;
-
- list_del(&priv->list);
- kmem_cache_free(stub_priv_cache, priv);
- usb_free_urb(urb);
-}
-
/* be in spin_lock_irqsave(&sdev->priv_lock, flags) */
void stub_enqueue_ret_unlink(struct stub_device *sdev, __u32 seqnum,
__u32 status)
@@ -85,6 +71,22 @@ void stub_complete(struct urb *urb)
break;
}
+ /*
+ * If the server breaks single SG request into the several URBs, the
+ * URBs must be reassembled before sending completed URB to the vhci.
+ * Don't wake up the tx thread until all the URBs are completed.
+ */
+ if (priv->sgl) {
+ priv->completed_urbs++;
+
+ /* Only save the first error status */
+ if (urb->status && !priv->urb_status)
+ priv->urb_status = urb->status;
+
+ if (priv->completed_urbs < priv->num_urbs)
+ return;
+ }
+
/* link a urb to the queue of tx. */
spin_lock_irqsave(&sdev->priv_lock, flags);
if (sdev->ud.tcp_socket == NULL) {
@@ -156,18 +158,22 @@ static int stub_send_ret_submit(struct s
size_t total_size = 0;
while ((priv = dequeue_from_priv_tx(sdev)) != NULL) {
- int ret;
- struct urb *urb = priv->urb;
+ struct urb *urb = priv->urbs[0];
struct usbip_header pdu_header;
struct usbip_iso_packet_descriptor *iso_buffer = NULL;
struct kvec *iov = NULL;
+ struct scatterlist *sg;
+ u32 actual_length = 0;
int iovnum = 0;
+ int ret;
+ int i;
txsize = 0;
memset(&pdu_header, 0, sizeof(pdu_header));
memset(&msg, 0, sizeof(msg));
- if (urb->actual_length > 0 && !urb->transfer_buffer) {
+ if (urb->actual_length > 0 && !urb->transfer_buffer &&
+ !urb->num_sgs) {
dev_err(&sdev->udev->dev,
"urb: actual_length %d transfer_buffer null\n",
urb->actual_length);
@@ -176,6 +182,11 @@ static int stub_send_ret_submit(struct s
if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
iovnum = 2 + urb->number_of_packets;
+ else if (usb_pipein(urb->pipe) && urb->actual_length > 0 &&
+ urb->num_sgs)
+ iovnum = 1 + urb->num_sgs;
+ else if (usb_pipein(urb->pipe) && priv->sgl)
+ iovnum = 1 + priv->num_urbs;
else
iovnum = 2;
@@ -192,6 +203,15 @@ static int stub_send_ret_submit(struct s
setup_ret_submit_pdu(&pdu_header, urb);
usbip_dbg_stub_tx("setup txdata seqnum: %d\n",
pdu_header.base.seqnum);
+
+ if (priv->sgl) {
+ for (i = 0; i < priv->num_urbs; i++)
+ actual_length += priv->urbs[i]->actual_length;
+
+ pdu_header.u.ret_submit.status = priv->urb_status;
+ pdu_header.u.ret_submit.actual_length = actual_length;
+ }
+
usbip_header_correct_endian(&pdu_header, 1);
iov[iovnum].iov_base = &pdu_header;
@@ -200,12 +220,47 @@ static int stub_send_ret_submit(struct s
txsize += sizeof(pdu_header);
/* 2. setup transfer buffer */
- if (usb_pipein(urb->pipe) &&
+ if (usb_pipein(urb->pipe) && priv->sgl) {
+ /* If the server split a single SG request into several
+ * URBs because the server's HCD doesn't support SG,
+ * reassemble the split URB buffers into a single
+ * return command.
+ */
+ for (i = 0; i < priv->num_urbs; i++) {
+ iov[iovnum].iov_base =
+ priv->urbs[i]->transfer_buffer;
+ iov[iovnum].iov_len =
+ priv->urbs[i]->actual_length;
+ iovnum++;
+ }
+ txsize += actual_length;
+ } else if (usb_pipein(urb->pipe) &&
usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS &&
urb->actual_length > 0) {
- iov[iovnum].iov_base = urb->transfer_buffer;
- iov[iovnum].iov_len = urb->actual_length;
- iovnum++;
+ if (urb->num_sgs) {
+ unsigned int copy = urb->actual_length;
+ int size;
+
+ for_each_sg(urb->sg, sg, urb->num_sgs, i) {
+ if (copy == 0)
+ break;
+
+ if (copy < sg->length)
+ size = copy;
+ else
+ size = sg->length;
+
+ iov[iovnum].iov_base = sg_virt(sg);
+ iov[iovnum].iov_len = size;
+
+ iovnum++;
+ copy -= size;
+ }
+ } else {
+ iov[iovnum].iov_base = urb->transfer_buffer;
+ iov[iovnum].iov_len = urb->actual_length;
+ iovnum++;
+ }
txsize += urb->actual_length;
} else if (usb_pipein(urb->pipe) &&
usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
--- a/drivers/usb/usbip/usbip_common.c
+++ b/drivers/usb/usbip/usbip_common.c
@@ -680,8 +680,12 @@ EXPORT_SYMBOL_GPL(usbip_pad_iso);
/* some members of urb must be substituted before. */
int usbip_recv_xbuff(struct usbip_device *ud, struct urb *urb)
{
- int ret;
+ struct scatterlist *sg;
+ int ret = 0;
+ int recv;
int size;
+ int copy;
+ int i;
if (ud->side == USBIP_STUB || ud->side == USBIP_VUDC) {
/* the direction of urb must be OUT. */
@@ -701,29 +705,48 @@ int usbip_recv_xbuff(struct usbip_device
if (!(size > 0))
return 0;
- if (size > urb->transfer_buffer_length) {
+ if (size > urb->transfer_buffer_length)
/* should not happen, probably malicious packet */
- if (ud->side == USBIP_STUB) {
- usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
- return 0;
- } else {
- usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
- return -EPIPE;
- }
- }
+ goto error;
+
+ if (urb->num_sgs) {
+ copy = size;
+ for_each_sg(urb->sg, sg, urb->num_sgs, i) {
+ int recv_size;
+
+ if (copy < sg->length)
+ recv_size = copy;
+ else
+ recv_size = sg->length;
+
+ recv = usbip_recv(ud->tcp_socket, sg_virt(sg),
+ recv_size);
- ret = usbip_recv(ud->tcp_socket, urb->transfer_buffer, size);
- if (ret != size) {
- dev_err(&urb->dev->dev, "recv xbuf, %d\n", ret);
- if (ud->side == USBIP_STUB || ud->side == USBIP_VUDC) {
- usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
- } else {
- usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
- return -EPIPE;
+ if (recv != recv_size)
+ goto error;
+
+ copy -= recv;
+ ret += recv;
}
+
+ if (ret != size)
+ goto error;
+ } else {
+ ret = usbip_recv(ud->tcp_socket, urb->transfer_buffer, size);
+ if (ret != size)
+ goto error;
}
return ret;
+
+error:
+ dev_err(&urb->dev->dev, "recv xbuf, %d\n", ret);
+ if (ud->side == USBIP_STUB || ud->side == USBIP_VUDC)
+ usbip_event_add(ud, SDEV_EVENT_ERROR_TCP);
+ else
+ usbip_event_add(ud, VDEV_EVENT_ERROR_TCP);
+
+ return -EPIPE;
}
EXPORT_SYMBOL_GPL(usbip_recv_xbuff);
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -697,7 +697,8 @@ static int vhci_urb_enqueue(struct usb_h
}
vdev = &vhci_hcd->vdev[portnum-1];
- if (!urb->transfer_buffer && urb->transfer_buffer_length) {
+ if (!urb->transfer_buffer && !urb->num_sgs &&
+ urb->transfer_buffer_length) {
dev_dbg(dev, "Null URB transfer buffer\n");
return -EINVAL;
}
@@ -1143,6 +1144,15 @@ static int vhci_setup(struct usb_hcd *hc
hcd->speed = HCD_USB3;
hcd->self.root_hub->speed = USB_SPEED_SUPER;
}
+
+ /*
+ * Support SG.
+ * sg_tablesize is an arbitrary value to alleviate memory pressure
+ * on the host.
+ */
+ hcd->self.sg_tablesize = 32;
+ hcd->self.no_sg_constraint = 1;
+
return 0;
}
--- a/drivers/usb/usbip/vhci_rx.c
+++ b/drivers/usb/usbip/vhci_rx.c
@@ -90,6 +90,9 @@ static void vhci_recv_ret_submit(struct
if (usbip_dbg_flag_vhci_rx)
usbip_dump_urb(urb);
+ if (urb->num_sgs)
+ urb->transfer_flags &= ~URB_DMA_MAP_SG;
+
usbip_dbg_vhci_rx("now giveback urb %u\n", pdu->base.seqnum);
spin_lock_irqsave(&vhci->lock, flags);
--- a/drivers/usb/usbip/vhci_tx.c
+++ b/drivers/usb/usbip/vhci_tx.c
@@ -5,6 +5,7 @@
#include <linux/kthread.h>
#include <linux/slab.h>
+#include <linux/scatterlist.h>
#include "usbip_common.h"
#include "vhci.h"
@@ -50,19 +51,23 @@ static struct vhci_priv *dequeue_from_pr
static int vhci_send_cmd_submit(struct vhci_device *vdev)
{
+ struct usbip_iso_packet_descriptor *iso_buffer = NULL;
struct vhci_priv *priv = NULL;
+ struct scatterlist *sg;
struct msghdr msg;
- struct kvec iov[3];
+ struct kvec *iov;
size_t txsize;
size_t total_size = 0;
+ int iovnum;
+ int err = -ENOMEM;
+ int i;
while ((priv = dequeue_from_priv_tx(vdev)) != NULL) {
int ret;
struct urb *urb = priv->urb;
struct usbip_header pdu_header;
- struct usbip_iso_packet_descriptor *iso_buffer = NULL;
txsize = 0;
memset(&pdu_header, 0, sizeof(pdu_header));
@@ -72,18 +77,45 @@ static int vhci_send_cmd_submit(struct v
usbip_dbg_vhci_tx("setup txdata urb seqnum %lu\n",
priv->seqnum);
+ if (urb->num_sgs && usb_pipeout(urb->pipe))
+ iovnum = 2 + urb->num_sgs;
+ else
+ iovnum = 3;
+
+ iov = kcalloc(iovnum, sizeof(*iov), GFP_KERNEL);
+ if (!iov) {
+ usbip_event_add(&vdev->ud, SDEV_EVENT_ERROR_MALLOC);
+ return -ENOMEM;
+ }
+
+ if (urb->num_sgs)
+ urb->transfer_flags |= URB_DMA_MAP_SG;
+
/* 1. setup usbip_header */
setup_cmd_submit_pdu(&pdu_header, urb);
usbip_header_correct_endian(&pdu_header, 1);
+ iovnum = 0;
- iov[0].iov_base = &pdu_header;
- iov[0].iov_len = sizeof(pdu_header);
+ iov[iovnum].iov_base = &pdu_header;
+ iov[iovnum].iov_len = sizeof(pdu_header);
txsize += sizeof(pdu_header);
+ iovnum++;
/* 2. setup transfer buffer */
if (!usb_pipein(urb->pipe) && urb->transfer_buffer_length > 0) {
- iov[1].iov_base = urb->transfer_buffer;
- iov[1].iov_len = urb->transfer_buffer_length;
+ if (urb->num_sgs &&
+ !usb_endpoint_xfer_isoc(&urb->ep->desc)) {
+ for_each_sg(urb->sg, sg, urb->num_sgs, i) {
+ iov[iovnum].iov_base = sg_virt(sg);
+ iov[iovnum].iov_len = sg->length;
+ iovnum++;
+ }
+ } else {
+ iov[iovnum].iov_base = urb->transfer_buffer;
+ iov[iovnum].iov_len =
+ urb->transfer_buffer_length;
+ iovnum++;
+ }
txsize += urb->transfer_buffer_length;
}
@@ -95,23 +127,26 @@ static int vhci_send_cmd_submit(struct v
if (!iso_buffer) {
usbip_event_add(&vdev->ud,
SDEV_EVENT_ERROR_MALLOC);
- return -1;
+ goto err_iso_buffer;
}
- iov[2].iov_base = iso_buffer;
- iov[2].iov_len = len;
+ iov[iovnum].iov_base = iso_buffer;
+ iov[iovnum].iov_len = len;
+ iovnum++;
txsize += len;
}
- ret = kernel_sendmsg(vdev->ud.tcp_socket, &msg, iov, 3, txsize);
+ ret = kernel_sendmsg(vdev->ud.tcp_socket, &msg, iov, iovnum,
+ txsize);
if (ret != txsize) {
pr_err("sendmsg failed!, ret=%d for %zd\n", ret,
txsize);
- kfree(iso_buffer);
usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_TCP);
- return -1;
+ err = -EPIPE;
+ goto err_tx;
}
+ kfree(iov);
kfree(iso_buffer);
usbip_dbg_vhci_tx("send txdata\n");
@@ -119,6 +154,13 @@ static int vhci_send_cmd_submit(struct v
}
return total_size;
+
+err_tx:
+ kfree(iso_buffer);
+err_iso_buffer:
+ kfree(iov);
+
+ return err;
}
static struct vhci_unlink *dequeue_from_unlink_tx(struct vhci_device *vdev)
From: Jakub Kicinski <[email protected]>
[ Upstream commit 41098af59d8d753aa8d3bb4310cc4ecb61fc82c7 ]
Add a test which spawns 16 threads and performs concurrent
send and recv calls on the same socket.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/net/tls.c | 108 ++++++++++++++++++++++++++++++++++++++
1 file changed, 108 insertions(+)
--- a/tools/testing/selftests/net/tls.c
+++ b/tools/testing/selftests/net/tls.c
@@ -898,6 +898,114 @@ TEST_F(tls, nonblocking)
}
}
+static void
+test_mutliproc(struct __test_metadata *_metadata, struct _test_data_tls *self,
+ bool sendpg, unsigned int n_readers, unsigned int n_writers)
+{
+ const unsigned int n_children = n_readers + n_writers;
+ const size_t data = 6 * 1000 * 1000;
+ const size_t file_sz = data / 100;
+ size_t read_bias, write_bias;
+ int i, fd, child_id;
+ char buf[file_sz];
+ pid_t pid;
+
+ /* Only allow multiples for simplicity */
+ ASSERT_EQ(!(n_readers % n_writers) || !(n_writers % n_readers), true);
+ read_bias = n_writers / n_readers ?: 1;
+ write_bias = n_readers / n_writers ?: 1;
+
+ /* prep a file to send */
+ fd = open("/tmp/", O_TMPFILE | O_RDWR, 0600);
+ ASSERT_GE(fd, 0);
+
+ memset(buf, 0xac, file_sz);
+ ASSERT_EQ(write(fd, buf, file_sz), file_sz);
+
+ /* spawn children */
+ for (child_id = 0; child_id < n_children; child_id++) {
+ pid = fork();
+ ASSERT_NE(pid, -1);
+ if (!pid)
+ break;
+ }
+
+ /* parent waits for all children */
+ if (pid) {
+ for (i = 0; i < n_children; i++) {
+ int status;
+
+ wait(&status);
+ EXPECT_EQ(status, 0);
+ }
+
+ return;
+ }
+
+ /* Split threads for reading and writing */
+ if (child_id < n_readers) {
+ size_t left = data * read_bias;
+ char rb[8001];
+
+ while (left) {
+ int res;
+
+ res = recv(self->cfd, rb,
+ left > sizeof(rb) ? sizeof(rb) : left, 0);
+
+ EXPECT_GE(res, 0);
+ left -= res;
+ }
+ } else {
+ size_t left = data * write_bias;
+
+ while (left) {
+ int res;
+
+ ASSERT_EQ(lseek(fd, 0, SEEK_SET), 0);
+ if (sendpg)
+ res = sendfile(self->fd, fd, NULL,
+ left > file_sz ? file_sz : left);
+ else
+ res = send(self->fd, buf,
+ left > file_sz ? file_sz : left, 0);
+
+ EXPECT_GE(res, 0);
+ left -= res;
+ }
+ }
+}
+
+TEST_F(tls, mutliproc_even)
+{
+ test_mutliproc(_metadata, self, false, 6, 6);
+}
+
+TEST_F(tls, mutliproc_readers)
+{
+ test_mutliproc(_metadata, self, false, 4, 12);
+}
+
+TEST_F(tls, mutliproc_writers)
+{
+ test_mutliproc(_metadata, self, false, 10, 2);
+}
+
+TEST_F(tls, mutliproc_sendpage_even)
+{
+ test_mutliproc(_metadata, self, true, 6, 6);
+}
+
+TEST_F(tls, mutliproc_sendpage_readers)
+{
+ test_mutliproc(_metadata, self, true, 4, 12);
+}
+
+TEST_F(tls, mutliproc_sendpage_writers)
+{
+ test_mutliproc(_metadata, self, true, 10, 2);
+}
+
TEST_F(tls, control_msg)
{
if (self->notls)
From: wenxu <[email protected]>
[ Upstream commit a69a85da458f79088c38a38db034a4d64d9c32c3 ]
Payload offload rule should also check the length of the match.
Moreover, check for unsupported link-layer fields:
nft --debug=netlink add rule firewall zones vlan id 100
...
[ payload load 2b @ link header + 0 => reg 1 ]
this loads 2byte base on ll header and offset 0.
This also fixes unsupported raw payload match.
Fixes: 92ad6325cb89 ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: wenxu <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/netfilter/nft_payload.c | 38 +++++++++++++++++++++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/net/netfilter/nft_payload.c b/net/netfilter/nft_payload.c
index 22a80eb60222e..5cb2d8908d2a5 100644
--- a/net/netfilter/nft_payload.c
+++ b/net/netfilter/nft_payload.c
@@ -161,13 +161,21 @@ static int nft_payload_offload_ll(struct nft_offload_ctx *ctx,
switch (priv->offset) {
case offsetof(struct ethhdr, h_source):
+ if (priv->len != ETH_ALEN)
+ return -EOPNOTSUPP;
+
NFT_OFFLOAD_MATCH(FLOW_DISSECTOR_KEY_ETH_ADDRS, eth_addrs,
src, ETH_ALEN, reg);
break;
case offsetof(struct ethhdr, h_dest):
+ if (priv->len != ETH_ALEN)
+ return -EOPNOTSUPP;
+
NFT_OFFLOAD_MATCH(FLOW_DISSECTOR_KEY_ETH_ADDRS, eth_addrs,
dst, ETH_ALEN, reg);
break;
+ default:
+ return -EOPNOTSUPP;
}
return 0;
@@ -181,14 +189,23 @@ static int nft_payload_offload_ip(struct nft_offload_ctx *ctx,
switch (priv->offset) {
case offsetof(struct iphdr, saddr):
+ if (priv->len != sizeof(struct in_addr))
+ return -EOPNOTSUPP;
+
NFT_OFFLOAD_MATCH(FLOW_DISSECTOR_KEY_IPV4_ADDRS, ipv4, src,
sizeof(struct in_addr), reg);
break;
case offsetof(struct iphdr, daddr):
+ if (priv->len != sizeof(struct in_addr))
+ return -EOPNOTSUPP;
+
NFT_OFFLOAD_MATCH(FLOW_DISSECTOR_KEY_IPV4_ADDRS, ipv4, dst,
sizeof(struct in_addr), reg);
break;
case offsetof(struct iphdr, protocol):
+ if (priv->len != sizeof(__u8))
+ return -EOPNOTSUPP;
+
NFT_OFFLOAD_MATCH(FLOW_DISSECTOR_KEY_BASIC, basic, ip_proto,
sizeof(__u8), reg);
nft_offload_set_dependency(ctx, NFT_OFFLOAD_DEP_TRANSPORT);
@@ -208,14 +225,23 @@ static int nft_payload_offload_ip6(struct nft_offload_ctx *ctx,
switch (priv->offset) {
case offsetof(struct ipv6hdr, saddr):
+ if (priv->len != sizeof(struct in6_addr))
+ return -EOPNOTSUPP;
+
NFT_OFFLOAD_MATCH(FLOW_DISSECTOR_KEY_IPV6_ADDRS, ipv6, src,
sizeof(struct in6_addr), reg);
break;
case offsetof(struct ipv6hdr, daddr):
+ if (priv->len != sizeof(struct in6_addr))
+ return -EOPNOTSUPP;
+
NFT_OFFLOAD_MATCH(FLOW_DISSECTOR_KEY_IPV6_ADDRS, ipv6, dst,
sizeof(struct in6_addr), reg);
break;
case offsetof(struct ipv6hdr, nexthdr):
+ if (priv->len != sizeof(__u8))
+ return -EOPNOTSUPP;
+
NFT_OFFLOAD_MATCH(FLOW_DISSECTOR_KEY_BASIC, basic, ip_proto,
sizeof(__u8), reg);
nft_offload_set_dependency(ctx, NFT_OFFLOAD_DEP_TRANSPORT);
@@ -255,10 +281,16 @@ static int nft_payload_offload_tcp(struct nft_offload_ctx *ctx,
switch (priv->offset) {
case offsetof(struct tcphdr, source):
+ if (priv->len != sizeof(__be16))
+ return -EOPNOTSUPP;
+
NFT_OFFLOAD_MATCH(FLOW_DISSECTOR_KEY_PORTS, tp, src,
sizeof(__be16), reg);
break;
case offsetof(struct tcphdr, dest):
+ if (priv->len != sizeof(__be16))
+ return -EOPNOTSUPP;
+
NFT_OFFLOAD_MATCH(FLOW_DISSECTOR_KEY_PORTS, tp, dst,
sizeof(__be16), reg);
break;
@@ -277,10 +309,16 @@ static int nft_payload_offload_udp(struct nft_offload_ctx *ctx,
switch (priv->offset) {
case offsetof(struct udphdr, source):
+ if (priv->len != sizeof(__be16))
+ return -EOPNOTSUPP;
+
NFT_OFFLOAD_MATCH(FLOW_DISSECTOR_KEY_PORTS, tp, src,
sizeof(__be16), reg);
break;
case offsetof(struct udphdr, dest):
+ if (priv->len != sizeof(__be16))
+ return -EOPNOTSUPP;
+
NFT_OFFLOAD_MATCH(FLOW_DISSECTOR_KEY_PORTS, tp, dst,
sizeof(__be16), reg);
break;
--
2.20.1
From: Pan Bian <[email protected]>
[ Upstream commit 025ec40b81d785a98f76b8bdb509ac10773b4f12 ]
The function nfc_put_device(dev) is called twice to drop the reference
to dev when there is no associated local llcp. Remove one of them to fix
the bug.
Fixes: 52feb444a903 ("NFC: Extend netlink interface for LTO, RW, and MIUX parameters support")
Fixes: d9b8d8e19b07 ("NFC: llcp: Service Name Lookup netlink interface")
Signed-off-by: Pan Bian <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/nfc/netlink.c | 2 --
1 file changed, 2 deletions(-)
--- a/net/nfc/netlink.c
+++ b/net/nfc/netlink.c
@@ -1099,7 +1099,6 @@ static int nfc_genl_llc_set_params(struc
local = nfc_llcp_find_local(dev);
if (!local) {
- nfc_put_device(dev);
rc = -ENODEV;
goto exit;
}
@@ -1159,7 +1158,6 @@ static int nfc_genl_llc_sdreq(struct sk_
local = nfc_llcp_find_local(dev);
if (!local) {
- nfc_put_device(dev);
rc = -ENODEV;
goto exit;
}
From: John Keeping <[email protected]>
commit ab6cd0e5276e24403751e0b3b8ed807738a8571f upstream.
In the next commit we will add new fields to map_groups and we need
these to be null if no value is assigned. The simplest way to achieve
this is to request zeroed memory from the allocator.
Signed-off-by: John Keeping <[email protected]>
Reviewed-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: john keeping <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Andres Freund <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/map.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/perf/util/map.c
+++ b/tools/perf/util/map.c
@@ -637,7 +637,7 @@ bool map_groups__empty(struct map_groups
struct map_groups *map_groups__new(struct machine *machine)
{
- struct map_groups *mg = malloc(sizeof(*mg));
+ struct map_groups *mg = zalloc(sizeof(*mg));
if (mg != NULL)
map_groups__init(mg, machine);
From: Kurt Van Dijck <[email protected]>
commit 3cb3eaac52c0f145d895f4b6c22834d5f02b8569 upstream.
When the status register is read without the status IRQ pending, the
chip may not raise the interrupt line for an upcoming status interrupt
and the driver may miss a status interrupt.
It is critical that the BUSOFF status interrupt is forwarded to the
higher layers, since no more interrupts will follow without
intervention.
Thanks to Wolfgang and Joe for bringing up the first idea.
Signed-off-by: Kurt Van Dijck <[email protected]>
Cc: Wolfgang Grandegger <[email protected]>
Cc: Joe Burmeister <[email protected]>
Fixes: fa39b54ccf28 ("can: c_can: Get rid of pointless interrupts")
Cc: linux-stable <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/c_can/c_can.c | 25 ++++++++++++++++++++-----
drivers/net/can/c_can/c_can.h | 1 +
2 files changed, 21 insertions(+), 5 deletions(-)
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -97,6 +97,9 @@
#define BTR_TSEG2_SHIFT 12
#define BTR_TSEG2_MASK (0x7 << BTR_TSEG2_SHIFT)
+/* interrupt register */
+#define INT_STS_PENDING 0x8000
+
/* brp extension register */
#define BRP_EXT_BRPE_MASK 0x0f
#define BRP_EXT_BRPE_SHIFT 0
@@ -1029,10 +1032,16 @@ static int c_can_poll(struct napi_struct
u16 curr, last = priv->last_status;
int work_done = 0;
- priv->last_status = curr = priv->read_reg(priv, C_CAN_STS_REG);
- /* Ack status on C_CAN. D_CAN is self clearing */
- if (priv->type != BOSCH_D_CAN)
- priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED);
+ /* Only read the status register if a status interrupt was pending */
+ if (atomic_xchg(&priv->sie_pending, 0)) {
+ priv->last_status = curr = priv->read_reg(priv, C_CAN_STS_REG);
+ /* Ack status on C_CAN. D_CAN is self clearing */
+ if (priv->type != BOSCH_D_CAN)
+ priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED);
+ } else {
+ /* no change detected ... */
+ curr = last;
+ }
/* handle state changes */
if ((curr & STATUS_EWARN) && (!(last & STATUS_EWARN))) {
@@ -1083,10 +1092,16 @@ static irqreturn_t c_can_isr(int irq, vo
{
struct net_device *dev = (struct net_device *)dev_id;
struct c_can_priv *priv = netdev_priv(dev);
+ int reg_int;
- if (!priv->read_reg(priv, C_CAN_INT_REG))
+ reg_int = priv->read_reg(priv, C_CAN_INT_REG);
+ if (!reg_int)
return IRQ_NONE;
+ /* save for later use */
+ if (reg_int & INT_STS_PENDING)
+ atomic_set(&priv->sie_pending, 1);
+
/* disable all interrupts and schedule the NAPI */
c_can_irq_control(priv, false);
napi_schedule(&priv->napi);
--- a/drivers/net/can/c_can/c_can.h
+++ b/drivers/net/can/c_can/c_can.h
@@ -198,6 +198,7 @@ struct c_can_priv {
struct net_device *dev;
struct device *device;
atomic_t tx_active;
+ atomic_t sie_pending;
unsigned long tx_dir;
int last_status;
u16 (*read_reg) (const struct c_can_priv *priv, enum reg index);
From: Tariq Toukan <[email protected]>
[ Upstream commit 2c559361389b452ca23494080d0c65ab812706c1 ]
A call to kTLS completion handler was missing in the TXQSQ release
flow. Add it.
Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <[email protected]>
Reviewed-by: Eran Ben Elisha <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../mellanox/mlx5/core/en_accel/ktls.h | 7 ++++-
.../mellanox/mlx5/core/en_accel/ktls_tx.c | 11 ++++++--
.../net/ethernet/mellanox/mlx5/core/en_tx.c | 28 ++++++++++---------
3 files changed, 30 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls.h b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls.h
index b7298f9ee3d3f..c4c128908b6e8 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls.h
@@ -86,7 +86,7 @@ struct sk_buff *mlx5e_ktls_handle_tx_skb(struct net_device *netdev,
struct mlx5e_tx_wqe **wqe, u16 *pi);
void mlx5e_ktls_tx_handle_resync_dump_comp(struct mlx5e_txqsq *sq,
struct mlx5e_tx_wqe_info *wi,
- struct mlx5e_sq_dma *dma);
+ u32 *dma_fifo_cc);
#else
@@ -94,6 +94,11 @@ static inline void mlx5e_ktls_build_netdev(struct mlx5e_priv *priv)
{
}
+static inline void
+mlx5e_ktls_tx_handle_resync_dump_comp(struct mlx5e_txqsq *sq,
+ struct mlx5e_tx_wqe_info *wi,
+ u32 *dma_fifo_cc) {}
+
#endif
#endif /* __MLX5E_TLS_H__ */
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c
index 7833ddef04278..002245bb6b287 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_tx.c
@@ -304,9 +304,16 @@ tx_post_resync_dump(struct mlx5e_txqsq *sq, struct sk_buff *skb,
void mlx5e_ktls_tx_handle_resync_dump_comp(struct mlx5e_txqsq *sq,
struct mlx5e_tx_wqe_info *wi,
- struct mlx5e_sq_dma *dma)
+ u32 *dma_fifo_cc)
{
- struct mlx5e_sq_stats *stats = sq->stats;
+ struct mlx5e_sq_stats *stats;
+ struct mlx5e_sq_dma *dma;
+
+ if (!wi->resync_dump_frag)
+ return;
+
+ dma = mlx5e_dma_get(sq, (*dma_fifo_cc)++);
+ stats = sq->stats;
mlx5e_tx_dma_unmap(sq->pdev, dma);
__skb_frag_unref(wi->resync_dump_frag);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
index 9aaf74407a11f..4eebf7946aca1 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
@@ -480,14 +480,7 @@ bool mlx5e_poll_tx_cq(struct mlx5e_cq *cq, int napi_budget)
skb = wi->skb;
if (unlikely(!skb)) {
-#ifdef CONFIG_MLX5_EN_TLS
- if (wi->resync_dump_frag) {
- struct mlx5e_sq_dma *dma =
- mlx5e_dma_get(sq, dma_fifo_cc++);
-
- mlx5e_ktls_tx_handle_resync_dump_comp(sq, wi, dma);
- }
-#endif
+ mlx5e_ktls_tx_handle_resync_dump_comp(sq, wi, &dma_fifo_cc);
sqcc += wi->num_wqebbs;
continue;
}
@@ -543,29 +536,38 @@ void mlx5e_free_txqsq_descs(struct mlx5e_txqsq *sq)
{
struct mlx5e_tx_wqe_info *wi;
struct sk_buff *skb;
+ u32 dma_fifo_cc;
+ u16 sqcc;
u16 ci;
int i;
- while (sq->cc != sq->pc) {
- ci = mlx5_wq_cyc_ctr2ix(&sq->wq, sq->cc);
+ sqcc = sq->cc;
+ dma_fifo_cc = sq->dma_fifo_cc;
+
+ while (sqcc != sq->pc) {
+ ci = mlx5_wq_cyc_ctr2ix(&sq->wq, sqcc);
wi = &sq->db.wqe_info[ci];
skb = wi->skb;
if (!skb) {
- sq->cc += wi->num_wqebbs;
+ mlx5e_ktls_tx_handle_resync_dump_comp(sq, wi, &dma_fifo_cc);
+ sqcc += wi->num_wqebbs;
continue;
}
for (i = 0; i < wi->num_dma; i++) {
struct mlx5e_sq_dma *dma =
- mlx5e_dma_get(sq, sq->dma_fifo_cc++);
+ mlx5e_dma_get(sq, dma_fifo_cc++);
mlx5e_tx_dma_unmap(sq->pdev, dma);
}
dev_kfree_skb_any(skb);
- sq->cc += wi->num_wqebbs;
+ sqcc += wi->num_wqebbs;
}
+
+ sq->dma_fifo_cc = dma_fifo_cc;
+ sq->cc = sqcc;
}
#ifdef CONFIG_MLX5_CORE_IPOIB
--
2.20.1
From: Oliver Neukum <[email protected]>
[ Upstream commit 332f989a3b0041b810836c5c3747e59aad7e9d0b ]
A malicious device may give half an answer when asked
for its MTU. The driver will proceed after this with
a garbage MTU. Anything but a complete answer must be treated
as an error.
V2: used sizeof as request by Alexander
Reported-and-tested-by: [email protected]
Signed-off-by: Oliver Neukum <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/usb/cdc_ncm.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -578,8 +578,8 @@ static void cdc_ncm_set_dgram_size(struc
/* read current mtu value from device */
err = usbnet_read_cmd(dev, USB_CDC_GET_MAX_DATAGRAM_SIZE,
USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
- 0, iface_no, &max_datagram_size, 2);
- if (err < 0) {
+ 0, iface_no, &max_datagram_size, sizeof(max_datagram_size));
+ if (err < sizeof(max_datagram_size)) {
dev_dbg(&dev->intf->dev, "GET_MAX_DATAGRAM_SIZE failed\n");
goto out;
}
@@ -590,7 +590,7 @@ static void cdc_ncm_set_dgram_size(struc
max_datagram_size = cpu_to_le16(ctx->max_datagram_size);
err = usbnet_write_cmd(dev, USB_CDC_SET_MAX_DATAGRAM_SIZE,
USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE,
- 0, iface_no, &max_datagram_size, 2);
+ 0, iface_no, &max_datagram_size, sizeof(max_datagram_size));
if (err < 0)
dev_dbg(&dev->intf->dev, "SET_MAX_DATAGRAM_SIZE failed\n");
From: Zhang Lixu <[email protected]>
[ Upstream commit 16ff7bf6dbcc6f77d2eec1ac9120edf44213c2f1 ]
When allocating tx ring buffers failed, should free tx buffers, not rx buffers.
Signed-off-by: Zhang Lixu <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/intel-ish-hid/ishtp/client-buffers.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hid/intel-ish-hid/ishtp/client-buffers.c b/drivers/hid/intel-ish-hid/ishtp/client-buffers.c
index 1b0a0cc605e77..513d7a4a1b8ac 100644
--- a/drivers/hid/intel-ish-hid/ishtp/client-buffers.c
+++ b/drivers/hid/intel-ish-hid/ishtp/client-buffers.c
@@ -84,7 +84,7 @@ int ishtp_cl_alloc_tx_ring(struct ishtp_cl *cl)
return 0;
out:
dev_err(&cl->device->dev, "error in allocating Tx pool\n");
- ishtp_cl_free_rx_ring(cl);
+ ishtp_cl_free_tx_ring(cl);
return -ENOMEM;
}
--
2.20.1
From: Jiri Benc <[email protected]>
[ Upstream commit 9e8acd9c44a0dd52b2922eeb82398c04e356c058 ]
The dst in bpf_input() has lwtstate field set. As it is of the
LWTUNNEL_ENCAP_BPF type, lwtstate->data is struct bpf_lwt. When the bpf
program returns BPF_LWT_REROUTE, ip_route_input_noref is directly called on
this skb. This causes invalid memory access, as ip_route_input_slow calls
skb_tunnel_info(skb) that expects the dst->lwstate->data to be
struct ip_tunnel_info. This results to struct bpf_lwt being accessed as
struct ip_tunnel_info.
Drop the dst before calling the IP route input functions (both for IPv4 and
IPv6).
Reported by KASAN.
Fixes: 3bd0b15281af ("bpf: add handling of BPF_LWT_REROUTE to lwt_bpf.c")
Signed-off-by: Jiri Benc <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Peter Oskolkov <[email protected]>
Link: https://lore.kernel.org/bpf/111664d58fe4e9dd9c8014bb3d0b2dab93086a9e.1570609794.git.jbenc@redhat.com
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/lwt_bpf.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/net/core/lwt_bpf.c b/net/core/lwt_bpf.c
index f93785e5833c1..74cfb8b5ab330 100644
--- a/net/core/lwt_bpf.c
+++ b/net/core/lwt_bpf.c
@@ -88,11 +88,16 @@ static int bpf_lwt_input_reroute(struct sk_buff *skb)
int err = -EINVAL;
if (skb->protocol == htons(ETH_P_IP)) {
+ struct net_device *dev = skb_dst(skb)->dev;
struct iphdr *iph = ip_hdr(skb);
+ dev_hold(dev);
+ skb_dst_drop(skb);
err = ip_route_input_noref(skb, iph->daddr, iph->saddr,
- iph->tos, skb_dst(skb)->dev);
+ iph->tos, dev);
+ dev_put(dev);
} else if (skb->protocol == htons(ETH_P_IPV6)) {
+ skb_dst_drop(skb);
err = ipv6_stub->ipv6_route_input(skb);
} else {
err = -EAFNOSUPPORT;
--
2.20.1
From: Michal Hocko <[email protected]>
commit abaed0112c1db08be15a784a2c5c8a8b3063cdd3 upstream.
/proc/pagetypeinfo is a debugging tool to examine internal page
allocator state wrt to fragmentation. It is not very useful for any
other use so normal users really do not need to read this file.
Waiman Long has noticed that reading this file can have negative side
effects because zone->lock is necessary for gathering data and that a)
interferes with the page allocator and its users and b) can lead to hard
lockups on large machines which have very long free_list.
Reduce both issues by simply not exporting the file to regular users.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 467c996c1e19 ("Print out statistics in relation to fragmentation avoidance to /proc/pagetypeinfo")
Signed-off-by: Michal Hocko <[email protected]>
Reported-by: Waiman Long <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Acked-by: Waiman Long <[email protected]>
Acked-by: Rafael Aquini <[email protected]>
Acked-by: David Rientjes <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Roman Gushchin <[email protected]>
Cc: Konstantin Khlebnikov <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/vmstat.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -1970,7 +1970,7 @@ void __init init_mm_internals(void)
#endif
#ifdef CONFIG_PROC_FS
proc_create_seq("buddyinfo", 0444, NULL, &fragmentation_op);
- proc_create_seq("pagetypeinfo", 0444, NULL, &pagetypeinfo_op);
+ proc_create_seq("pagetypeinfo", 0400, NULL, &pagetypeinfo_op);
proc_create_seq("vmstat", 0444, NULL, &vmstat_op);
proc_create_seq("zoneinfo", 0444, NULL, &zoneinfo_op);
#endif
From: Lukas Wunner <[email protected]>
commit 250367c59e6ba0d79d702a059712d66edacd4a1a upstream.
Invoking the following commands on a 32-bit architecture with strict
alignment requirements (such as an ARMv7-based Raspberry Pi) results
in an alignment exception:
# nft add table ip test-ip4
# nft add chain ip test-ip4 output { type filter hook output priority 0; }
# nft add rule ip test-ip4 output quota 1025 bytes
Alignment trap: not handling instruction e1b26f9f at [<7f4473f8>]
Unhandled fault: alignment exception (0x001) at 0xb832e824
Internal error: : 1 [#1] PREEMPT SMP ARM
Hardware name: BCM2835
[<7f4473fc>] (nft_quota_do_init [nft_quota])
[<7f447448>] (nft_quota_init [nft_quota])
[<7f4260d0>] (nf_tables_newrule [nf_tables])
[<7f4168dc>] (nfnetlink_rcv_batch [nfnetlink])
[<7f416bd0>] (nfnetlink_rcv [nfnetlink])
[<8078b334>] (netlink_unicast)
[<8078b664>] (netlink_sendmsg)
[<8071b47c>] (sock_sendmsg)
[<8071bd18>] (___sys_sendmsg)
[<8071ce3c>] (__sys_sendmsg)
[<8071ce94>] (sys_sendmsg)
The reason is that nft_quota_do_init() calls atomic64_set() on an
atomic64_t which is only aligned to 32-bit, not 64-bit, because it
succeeds struct nft_expr in memory which only contains a 32-bit pointer.
Fix by aligning the nft_expr private data to 64-bit.
Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Lukas Wunner <[email protected]>
Cc: [email protected] # v3.13+
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/netfilter/nf_tables.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/include/net/netfilter/nf_tables.h
+++ b/include/net/netfilter/nf_tables.h
@@ -801,7 +801,8 @@ struct nft_expr_ops {
*/
struct nft_expr {
const struct nft_expr_ops *ops;
- unsigned char data[];
+ unsigned char data[]
+ __attribute__((aligned(__alignof__(u64))));
};
static inline void *nft_expr_priv(const struct nft_expr *expr)
From: Adam Ford <[email protected]>
commit cabe5f85e63626c00f3b879a670ec27325056a2d upstream.
The baseboard of the Logic PD i.MX6 development kit has a power
button routed which can both power down and power up the board.
It can also wake the board from sleep. This functionality was
marked as disabled by default in imx6qdl.dtsi, so it needs to
be explicitly enabled for each board.
This patch enables the snvs power key again.
Signed-off-by: Adam Ford <[email protected]>
Fixes: 770856f0da5d ("ARM: dts: imx6qdl: Enable SNVS power key according to board design")
Cc: stable <[email protected]> #5.3+
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
+++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
@@ -328,6 +328,10 @@
pinctrl-0 = <&pinctrl_pwm3>;
};
+&snvs_pwrkey {
+ status = "okay";
+};
+
&ssi2 {
status = "okay";
};
From: Manish Chopra <[email protected]>
[ Upstream commit deabc87111c690097c03765ea017cd500f7376fc ]
While rebooting the system with SR-IOV vfs enabled leads
to below crash due to recurrence of __qede_remove() on the VF
devices (first from .shutdown() flow of the VF itself and
another from PF's .shutdown() flow executing pci_disable_sriov())
This patch adds a safeguard in __qede_remove() flow to fix this,
so that driver doesn't attempt to remove "already removed" devices.
[ 194.360134] BUG: unable to handle kernel NULL pointer dereference at 00000000000008dc
[ 194.360227] IP: [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[ 194.360304] PGD 0
[ 194.360325] Oops: 0000 [#1] SMP
[ 194.360360] Modules linked in: tcp_lp fuse tun bridge stp llc devlink bonding ip_set nfnetlink ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_umad rpcrdma sunrpc rdma_ucm ib_uverbs ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi dell_smbios iTCO_wdt iTCO_vendor_support dell_wmi_descriptor dcdbas vfat fat pcc_cpufreq skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd qedr ib_core pcspkr ses enclosure joydev ipmi_ssif sg i2c_i801 lpc_ich mei_me mei wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_pad acpi_power_meter xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul crct10dif_common crc32c_intel mgag200
[ 194.361044] qede i2c_algo_bit drm_kms_helper qed syscopyarea sysfillrect nvme sysimgblt fb_sys_fops ttm nvme_core mpt3sas crc8 ptp drm pps_core ahci raid_class scsi_transport_sas libahci libata drm_panel_orientation_quirks nfit libnvdimm dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ip_tables]
[ 194.361297] CPU: 51 PID: 7996 Comm: reboot Kdump: loaded Not tainted 3.10.0-1062.el7.x86_64 #1
[ 194.361359] Hardware name: Dell Inc. PowerEdge MX840c/0740HW, BIOS 2.4.6 10/15/2019
[ 194.361412] task: ffff9cea9b360000 ti: ffff9ceabebdc000 task.ti: ffff9ceabebdc000
[ 194.361463] RIP: 0010:[<ffffffffc03553c4>] [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[ 194.361534] RSP: 0018:ffff9ceabebdfac0 EFLAGS: 00010282
[ 194.361570] RAX: 0000000000000000 RBX: ffff9cd013846098 RCX: 0000000000000000
[ 194.361621] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9cd013846098
[ 194.361668] RBP: ffff9ceabebdfae8 R08: 0000000000000000 R09: 0000000000000000
[ 194.361715] R10: 00000000bfe14201 R11: ffff9ceabfe141e0 R12: 0000000000000000
[ 194.361762] R13: ffff9cd013846098 R14: 0000000000000000 R15: ffff9ceab5e48000
[ 194.361810] FS: 00007f799c02d880(0000) GS:ffff9ceacb0c0000(0000) knlGS:0000000000000000
[ 194.361865] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 194.361903] CR2: 00000000000008dc CR3: 0000001bdac76000 CR4: 00000000007607e0
[ 194.361953] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 194.362002] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 194.362051] PKRU: 55555554
[ 194.362073] Call Trace:
[ 194.362109] [<ffffffffc0355500>] qede_remove+0x10/0x20 [qede]
[ 194.362180] [<ffffffffb97d0f3e>] pci_device_remove+0x3e/0xc0
[ 194.362240] [<ffffffffb98b3c52>] __device_release_driver+0x82/0xf0
[ 194.362285] [<ffffffffb98b3ce3>] device_release_driver+0x23/0x30
[ 194.362343] [<ffffffffb97c86d4>] pci_stop_bus_device+0x84/0xa0
[ 194.362388] [<ffffffffb97c87e2>] pci_stop_and_remove_bus_device+0x12/0x20
[ 194.362450] [<ffffffffb97f153f>] pci_iov_remove_virtfn+0xaf/0x160
[ 194.362496] [<ffffffffb97f1aec>] sriov_disable+0x3c/0xf0
[ 194.362534] [<ffffffffb97f1bc3>] pci_disable_sriov+0x23/0x30
[ 194.362599] [<ffffffffc02f83c3>] qed_sriov_disable+0x5e3/0x650 [qed]
[ 194.362658] [<ffffffffb9622df6>] ? kfree+0x106/0x140
[ 194.362709] [<ffffffffc02cc0c0>] ? qed_free_stream_mem+0x70/0x90 [qed]
[ 194.362754] [<ffffffffb9622df6>] ? kfree+0x106/0x140
[ 194.362803] [<ffffffffc02cd659>] qed_slowpath_stop+0x1a9/0x1d0 [qed]
[ 194.362854] [<ffffffffc035544e>] __qede_remove+0xae/0x130 [qede]
[ 194.362904] [<ffffffffc03554e0>] qede_shutdown+0x10/0x20 [qede]
[ 194.362956] [<ffffffffb97cf90a>] pci_device_shutdown+0x3a/0x60
[ 194.363010] [<ffffffffb98b180b>] device_shutdown+0xfb/0x1f0
[ 194.363066] [<ffffffffb94b66c6>] kernel_restart_prepare+0x36/0x40
[ 194.363107] [<ffffffffb94b66e2>] kernel_restart+0x12/0x60
[ 194.363146] [<ffffffffb94b6959>] SYSC_reboot+0x229/0x260
[ 194.363196] [<ffffffffb95f200d>] ? handle_mm_fault+0x39d/0x9b0
[ 194.363253] [<ffffffffb942b621>] ? __switch_to+0x151/0x580
[ 194.363304] [<ffffffffb9b7ec28>] ? __schedule+0x448/0x9c0
[ 194.363343] [<ffffffffb94b69fe>] SyS_reboot+0xe/0x10
[ 194.363387] [<ffffffffb9b8bede>] system_call_fastpath+0x25/0x2a
[ 194.363430] Code: f9 e9 37 ff ff ff 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 4c 8d af 98 00 00 00 41 54 4c 89 ef 41 89 f4 53 e8 4c e4 55 f9 <80> b8 dc 08 00 00 01 48 89 c3 4c 8d b8 c0 08 00 00 4c 8b b0 c0
[ 194.363712] RIP [<ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[ 194.363764] RSP <ffff9ceabebdfac0>
[ 194.363791] CR2: 00000000000008dc
Signed-off-by: Manish Chopra <[email protected]>
Signed-off-by: Ariel Elior <[email protected]>
Signed-off-by: Sudarsana Kalluru <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/qlogic/qede/qede_main.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -1208,8 +1208,16 @@ enum qede_remove_mode {
static void __qede_remove(struct pci_dev *pdev, enum qede_remove_mode mode)
{
struct net_device *ndev = pci_get_drvdata(pdev);
- struct qede_dev *edev = netdev_priv(ndev);
- struct qed_dev *cdev = edev->cdev;
+ struct qede_dev *edev;
+ struct qed_dev *cdev;
+
+ if (!ndev) {
+ dev_info(&pdev->dev, "Device has already been removed\n");
+ return;
+ }
+
+ edev = netdev_priv(ndev);
+ cdev = edev->cdev;
DP_INFO(edev, "Starting qede_remove\n");
From: Jason Gerecke <[email protected]>
commit ff479731c3859609530416a18ddb3db5db019b66 upstream.
The HID descriptors for most Wacom devices oddly declare the serial
number and other related fields as signed integers. When these numbers
are ingested by the HID subsystem, they are automatically sign-extended
into 32-bit integers. We treat the fields as unsigned elsewhere in the
kernel and userspace, however, so this sign-extension causes problems.
In particular, the sign-extended tool ID sent to userspace as ABS_MISC
does not properly match unsigned IDs used by xf86-input-wacom and libwacom.
We introduce a function 'wacom_s32tou' that can undo the automatic sign
extension performed by 'hid_snto32'. We call this function when processing
the serial number and related fields to ensure that we are dealing with
and reporting the unsigned form. We opt to use this method rather than
adding a descriptor fixup in 'wacom_hid_usage_quirk' since it should be
more robust in the face of future devices.
Ref: https://github.com/linuxwacom/input-wacom/issues/134
Fixes: f85c9dc678 ("HID: wacom: generic: Support tool ID and additional tool types")
CC: <[email protected]> # v4.10+
Signed-off-by: Jason Gerecke <[email protected]>
Reviewed-by: Aaron Armstrong Skomra <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/wacom.h | 15 +++++++++++++++
drivers/hid/wacom_wac.c | 10 ++++++----
2 files changed, 21 insertions(+), 4 deletions(-)
--- a/drivers/hid/wacom.h
+++ b/drivers/hid/wacom.h
@@ -202,6 +202,21 @@ static inline void wacom_schedule_work(s
}
}
+/*
+ * Convert a signed 32-bit integer to an unsigned n-bit integer. Undoes
+ * the normally-helpful work of 'hid_snto32' for fields that use signed
+ * ranges for questionable reasons.
+ */
+static inline __u32 wacom_s32tou(s32 value, __u8 n)
+{
+ switch (n) {
+ case 8: return ((__u8)value);
+ case 16: return ((__u16)value);
+ case 32: return ((__u32)value);
+ }
+ return value & (1 << (n - 1)) ? value & (~(~0U << n)) : value;
+}
+
extern const struct hid_device_id wacom_ids[];
void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len);
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -2258,7 +2258,7 @@ static void wacom_wac_pen_event(struct h
case HID_DG_TOOLSERIALNUMBER:
if (value) {
wacom_wac->serial[0] = (wacom_wac->serial[0] & ~0xFFFFFFFFULL);
- wacom_wac->serial[0] |= (__u32)value;
+ wacom_wac->serial[0] |= wacom_s32tou(value, field->report_size);
}
return;
case HID_DG_TWIST:
@@ -2274,15 +2274,17 @@ static void wacom_wac_pen_event(struct h
return;
case WACOM_HID_WD_SERIALHI:
if (value) {
+ __u32 raw_value = wacom_s32tou(value, field->report_size);
+
wacom_wac->serial[0] = (wacom_wac->serial[0] & 0xFFFFFFFF);
- wacom_wac->serial[0] |= ((__u64)value) << 32;
+ wacom_wac->serial[0] |= ((__u64)raw_value) << 32;
/*
* Non-USI EMR devices may contain additional tool type
* information here. See WACOM_HID_WD_TOOLTYPE case for
* more details.
*/
if (value >> 20 == 1) {
- wacom_wac->id[0] |= value & 0xFFFFF;
+ wacom_wac->id[0] |= raw_value & 0xFFFFF;
}
}
return;
@@ -2294,7 +2296,7 @@ static void wacom_wac_pen_event(struct h
* bitwise OR so the complete value can be built
* up over time :(
*/
- wacom_wac->id[0] |= value;
+ wacom_wac->id[0] |= wacom_s32tou(value, field->report_size);
return;
case WACOM_HID_WD_OFFSETLEFT:
if (features->offset_left && value != features->offset_left)
From: Jiri Olsa <[email protected]>
commit 722ddfde366fd46205456a9c5ff9b3359dc9a75e upstream.
The final sort might get confused when the comparison is done over
bigger numbers than int like for -s time.
Check the following report for longer workloads:
$ perf report -s time -F time,overhead --stdio
Fix hist_entry__sort() to properly return int64_t and not possible cut
int.
Fixes: 043ca389a318 ("perf tools: Use hpp formats to sort final output")
Signed-off-by: Jiri Olsa <[email protected]>
Reviewed-by: Andi Kleen <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected] # v3.16+
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/perf/util/hist.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -1618,7 +1618,7 @@ int hists__collapse_resort(struct hists
return 0;
}
-static int hist_entry__sort(struct hist_entry *a, struct hist_entry *b)
+static int64_t hist_entry__sort(struct hist_entry *a, struct hist_entry *b)
{
struct hists *hists = a->hists;
struct perf_hpp_fmt *fmt;
From: Stefano Garzarella <[email protected]>
[ Upstream commit ad8a7220355d39cddce8eac1cea9677333e8b821 ]
The "42f5cda5eaf4" commit rightly set SOCK_DONE on peer shutdown,
but there is an issue if we receive the SHUTDOWN(RDWR) while the
virtio_transport_close_timeout() is scheduled.
In this case, when the timeout fires, the SOCK_DONE is already
set and the virtio_transport_close_timeout() will not call
virtio_transport_reset() and virtio_transport_do_close().
This causes that both sockets remain open and will never be released,
preventing the unloading of [virtio|vhost]_transport modules.
This patch fixes this issue, calling virtio_transport_reset() and
virtio_transport_do_close() when we receive the SHUTDOWN(RDWR)
and there is nothing left to read.
Fixes: 42f5cda5eaf4 ("vsock/virtio: set SOCK_DONE on peer shutdown")
Cc: Stephen Barber <[email protected]>
Signed-off-by: Stefano Garzarella <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/vmw_vsock/virtio_transport_common.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
--- a/net/vmw_vsock/virtio_transport_common.c
+++ b/net/vmw_vsock/virtio_transport_common.c
@@ -870,9 +870,11 @@ virtio_transport_recv_connected(struct s
if (le32_to_cpu(pkt->hdr.flags) & VIRTIO_VSOCK_SHUTDOWN_SEND)
vsk->peer_shutdown |= SEND_SHUTDOWN;
if (vsk->peer_shutdown == SHUTDOWN_MASK &&
- vsock_stream_has_data(vsk) <= 0) {
- sock_set_flag(sk, SOCK_DONE);
- sk->sk_state = TCP_CLOSING;
+ vsock_stream_has_data(vsk) <= 0 &&
+ !sock_flag(sk, SOCK_DONE)) {
+ (void)virtio_transport_reset(vsk, NULL);
+
+ virtio_transport_do_close(vsk, true);
}
if (le32_to_cpu(pkt->hdr.flags))
sk->sk_state_change(sk);
From: John Hurley <[email protected]>
[ Upstream commit 59eb87cb52c9f7164804bc8639c4d03ba9b0c169 ]
When a new filter is added to cls_api, the function
tcf_chain_tp_insert_unique() looks up the protocol/priority/chain to
determine if the tcf_proto is duplicated in the chain's hashtable. It then
creates a new entry or continues with an existing one. In cls_flower, this
allows the function fl_ht_insert_unque to determine if a filter is a
duplicate and reject appropriately, meaning that the duplicate will not be
passed to drivers via the offload hooks. However, when a tcf_proto is
destroyed it is removed from its chain before a hardware remove hook is
hit. This can lead to a race whereby the driver has not received the
remove message but duplicate flows can be accepted. This, in turn, can
lead to the offload driver receiving incorrect duplicate flows and out of
order add/delete messages.
Prevent duplicates by utilising an approach suggested by Vlad Buslov. A
hash table per block stores each unique chain/protocol/prio being
destroyed. This entry is only removed when the full destroy (and hardware
offload) has completed. If a new flow is being added with the same
identiers as a tc_proto being detroyed, then the add request is replayed
until the destroy is complete.
Fixes: 8b64678e0af8 ("net: sched: refactor tp insert/delete for concurrent execution")
Signed-off-by: John Hurley <[email protected]>
Signed-off-by: Vlad Buslov <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reported-by: Louis Peens <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/sch_generic.h | 4 ++
net/sched/cls_api.c | 83 +++++++++++++++++++++++++++++++++++++++++++---
2 files changed, 83 insertions(+), 4 deletions(-)
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -13,6 +13,7 @@
#include <linux/refcount.h>
#include <linux/workqueue.h>
#include <linux/mutex.h>
+#include <linux/hashtable.h>
#include <net/gen_stats.h>
#include <net/rtnetlink.h>
#include <net/flow_offload.h>
@@ -359,6 +360,7 @@ struct tcf_proto {
bool deleting;
refcount_t refcnt;
struct rcu_head rcu;
+ struct hlist_node destroy_ht_node;
};
struct qdisc_skb_cb {
@@ -409,6 +411,8 @@ struct tcf_block {
struct list_head filter_chain_list;
} chain0;
struct rcu_head rcu;
+ DECLARE_HASHTABLE(proto_destroy_ht, 7);
+ struct mutex proto_destroy_lock; /* Lock for proto_destroy hashtable. */
};
#ifdef CONFIG_PROVE_LOCKING
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -21,6 +21,7 @@
#include <linux/slab.h>
#include <linux/idr.h>
#include <linux/rhashtable.h>
+#include <linux/jhash.h>
#include <net/net_namespace.h>
#include <net/sock.h>
#include <net/netlink.h>
@@ -45,6 +46,62 @@ static LIST_HEAD(tcf_proto_base);
/* Protects list of registered TC modules. It is pure SMP lock. */
static DEFINE_RWLOCK(cls_mod_lock);
+static u32 destroy_obj_hashfn(const struct tcf_proto *tp)
+{
+ return jhash_3words(tp->chain->index, tp->prio,
+ (__force __u32)tp->protocol, 0);
+}
+
+static void tcf_proto_signal_destroying(struct tcf_chain *chain,
+ struct tcf_proto *tp)
+{
+ struct tcf_block *block = chain->block;
+
+ mutex_lock(&block->proto_destroy_lock);
+ hash_add_rcu(block->proto_destroy_ht, &tp->destroy_ht_node,
+ destroy_obj_hashfn(tp));
+ mutex_unlock(&block->proto_destroy_lock);
+}
+
+static bool tcf_proto_cmp(const struct tcf_proto *tp1,
+ const struct tcf_proto *tp2)
+{
+ return tp1->chain->index == tp2->chain->index &&
+ tp1->prio == tp2->prio &&
+ tp1->protocol == tp2->protocol;
+}
+
+static bool tcf_proto_exists_destroying(struct tcf_chain *chain,
+ struct tcf_proto *tp)
+{
+ u32 hash = destroy_obj_hashfn(tp);
+ struct tcf_proto *iter;
+ bool found = false;
+
+ rcu_read_lock();
+ hash_for_each_possible_rcu(chain->block->proto_destroy_ht, iter,
+ destroy_ht_node, hash) {
+ if (tcf_proto_cmp(tp, iter)) {
+ found = true;
+ break;
+ }
+ }
+ rcu_read_unlock();
+
+ return found;
+}
+
+static void
+tcf_proto_signal_destroyed(struct tcf_chain *chain, struct tcf_proto *tp)
+{
+ struct tcf_block *block = chain->block;
+
+ mutex_lock(&block->proto_destroy_lock);
+ if (hash_hashed(&tp->destroy_ht_node))
+ hash_del_rcu(&tp->destroy_ht_node);
+ mutex_unlock(&block->proto_destroy_lock);
+}
+
/* Find classifier type by string name */
static const struct tcf_proto_ops *__tcf_proto_lookup_ops(const char *kind)
@@ -232,9 +289,11 @@ static void tcf_proto_get(struct tcf_pro
static void tcf_chain_put(struct tcf_chain *chain);
static void tcf_proto_destroy(struct tcf_proto *tp, bool rtnl_held,
- struct netlink_ext_ack *extack)
+ bool sig_destroy, struct netlink_ext_ack *extack)
{
tp->ops->destroy(tp, rtnl_held, extack);
+ if (sig_destroy)
+ tcf_proto_signal_destroyed(tp->chain, tp);
tcf_chain_put(tp->chain);
module_put(tp->ops->owner);
kfree_rcu(tp, rcu);
@@ -244,7 +303,7 @@ static void tcf_proto_put(struct tcf_pro
struct netlink_ext_ack *extack)
{
if (refcount_dec_and_test(&tp->refcnt))
- tcf_proto_destroy(tp, rtnl_held, extack);
+ tcf_proto_destroy(tp, rtnl_held, true, extack);
}
static int walker_check_empty(struct tcf_proto *tp, void *fh,
@@ -368,6 +427,7 @@ static bool tcf_chain_detach(struct tcf_
static void tcf_block_destroy(struct tcf_block *block)
{
mutex_destroy(&block->lock);
+ mutex_destroy(&block->proto_destroy_lock);
kfree_rcu(block, rcu);
}
@@ -543,6 +603,12 @@ static void tcf_chain_flush(struct tcf_c
mutex_lock(&chain->filter_chain_lock);
tp = tcf_chain_dereference(chain->filter_chain, chain);
+ while (tp) {
+ tp_next = rcu_dereference_protected(tp->next, 1);
+ tcf_proto_signal_destroying(chain, tp);
+ tp = tp_next;
+ }
+ tp = tcf_chain_dereference(chain->filter_chain, chain);
RCU_INIT_POINTER(chain->filter_chain, NULL);
tcf_chain0_head_change(chain, NULL);
chain->flushing = true;
@@ -1002,6 +1068,7 @@ static struct tcf_block *tcf_block_creat
return ERR_PTR(-ENOMEM);
}
mutex_init(&block->lock);
+ mutex_init(&block->proto_destroy_lock);
flow_block_init(&block->flow_block);
INIT_LIST_HEAD(&block->chain_list);
INIT_LIST_HEAD(&block->owner_list);
@@ -1754,6 +1821,12 @@ static struct tcf_proto *tcf_chain_tp_in
mutex_lock(&chain->filter_chain_lock);
+ if (tcf_proto_exists_destroying(chain, tp_new)) {
+ mutex_unlock(&chain->filter_chain_lock);
+ tcf_proto_destroy(tp_new, rtnl_held, false, NULL);
+ return ERR_PTR(-EAGAIN);
+ }
+
tp = tcf_chain_tp_find(chain, &chain_info,
protocol, prio, false);
if (!tp)
@@ -1761,10 +1834,10 @@ static struct tcf_proto *tcf_chain_tp_in
mutex_unlock(&chain->filter_chain_lock);
if (tp) {
- tcf_proto_destroy(tp_new, rtnl_held, NULL);
+ tcf_proto_destroy(tp_new, rtnl_held, false, NULL);
tp_new = tp;
} else if (err) {
- tcf_proto_destroy(tp_new, rtnl_held, NULL);
+ tcf_proto_destroy(tp_new, rtnl_held, false, NULL);
tp_new = ERR_PTR(err);
}
@@ -1802,6 +1875,7 @@ static void tcf_chain_tp_delete_empty(st
return;
}
+ tcf_proto_signal_destroying(chain, tp);
next = tcf_chain_dereference(chain_info.next, chain);
if (tp == chain->filter_chain)
tcf_chain0_head_change(chain, next);
@@ -2321,6 +2395,7 @@ static int tc_del_tfilter(struct sk_buff
err = -EINVAL;
goto errout_locked;
} else if (t->tcm_handle == 0) {
+ tcf_proto_signal_destroying(chain, tp);
tcf_chain_tp_remove(chain, &chain_info, tp);
mutex_unlock(&chain->filter_chain_lock);
stable-rc/linux-5.3.y boot: 130 boots: 0 failed, 122 passed with 7 offline, 1 conflict (v5.3.10-194-gfeeefcbdbfc1)
Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-5.3.y/kernel/v5.3.10-194-gfeeefcbdbfc1/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-5.3.y/kernel/v5.3.10-194-gfeeefcbdbfc1/
Tree: stable-rc
Branch: linux-5.3.y
Git Describe: v5.3.10-194-gfeeefcbdbfc1
Git Commit: feeefcbdbfc1362972ef26970aed0aafe90cc1ae
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 76 unique boards, 24 SoC families, 16 builds out of 207
Offline Platforms:
arm:
sunxi_defconfig:
gcc-8
sun5i-r8-chip: 1 offline lab
sun7i-a20-bananapi: 1 offline lab
multi_v7_defconfig:
gcc-8
qcom-apq8064-cm-qs600: 1 offline lab
sun5i-r8-chip: 1 offline lab
sun7i-a20-bananapi: 1 offline lab
davinci_all_defconfig:
gcc-8
dm365evm,legacy: 1 offline lab
qcom_defconfig:
gcc-8
qcom-apq8064-cm-qs600: 1 offline lab
Conflicting Boot Failure Detected: (These likely are not failures as other labs are reporting PASS. Needs review.)
i386:
i386_defconfig:
qemu_i386:
lab-collabora: PASS (gcc-8)
lab-baylibre: FAIL (gcc-8)
---
For more info write to <[email protected]>
On Tue, 12 Nov 2019 at 00:18, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.3.11 release.
> There are 193 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.3.11-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.3.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 5.3.11-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-5.3.y
git commit: feeefcbdbfc1362972ef26970aed0aafe90cc1ae
git describe: v5.3.10-194-gfeeefcbdbfc1
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-5.3-oe/build/v5.3.10-194-gfeeefcbdbfc1
No regressions (compared to build v5.3.10)
No fixes (compared to build v5.3.10)
Ran 26052 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libgpiod
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* perf
* spectre-meltdown-checker-test
* network-basic-tests
* v4l2-compliance
* ltp-open-posix-tests
* kvm-unit-tests
* ssuite
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org
On 11/11/2019 18:26, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.3.11 release.
> There are 193 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.3.11-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.3.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests for Tegra are passing ...
Test results for stable-v5.3:
12 builds: 12 pass, 0 fail
22 boots: 22 pass, 0 fail
38 tests: 38 pass, 0 fail
Linux version: 5.3.11-rc1-gfeeefcbdbfc1
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
On Tue, Nov 12, 2019 at 11:12:15AM +0530, Naresh Kamboju wrote:
> On Tue, 12 Nov 2019 at 00:18, Greg Kroah-Hartman
> <[email protected]> wrote:
> >
> > This is the start of the stable review cycle for the 5.3.11 release.
> > There are 193 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.3.11-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.3.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
> Results from Linaro’s test farm.
> No regressions on arm64, arm, x86_64, and i386.
Thanks for testing all of these and letting me know.
greg k-h
On Mon, Nov 11, 2019 at 07:26:22PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.3.11 release.
> There are 193 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 158 pass: 158 fail: 0
Qemu test results:
total: 391 pass: 391 fail: 0
Guenter
On Tue, Nov 12, 2019 at 10:20:40AM -0800, Guenter Roeck wrote:
> On Mon, Nov 11, 2019 at 07:26:22PM +0100, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.3.11 release.
> > There are 193 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed, 13 Nov 2019 18:08:44 +0000.
> > Anything received after that time might be too late.
> >
>
> Build results:
> total: 158 pass: 158 fail: 0
> Qemu test results:
> total: 391 pass: 391 fail: 0
Thanks for testing all of these and letting me know.
greg k-h