2017-07-31 14:48:43

by Yury Norov

[permalink] [raw]
Subject: [PATCH RFC] arm64: introduce mm_context_t flags

Hi Pratyush, Catalin

In patch 06beb72fbe23e ("arm64: introduce mm context flag to keep 32 bit task
information") you introduce the field flags but use it only for a single flag -
TIF_32BIT. It looks hacky to me for three reasons:
- The flag is introduced for the case where it's impossible to get the thread
info structure for the thread associated with mm. So thread_info flags (TIF)
may also be unavailable at place. This is not the case for the only existing
user of if - uprobes, but in general this approach requires to include thread
headers in mm code, which may become unwanted dependency.
- New flag, if it uses TIF bits, for consistency should for example set/clear
TIF_32BIT_AARCH64 for ILP32 tasks. And to be completely consistent, with
current approach we'd mirror thread_info flags to mm_context flags. And keep
it syncronized.
- If we start using TIF flags here, we cannot easily add new mm_context
specific bits because they may mess with TIF ones.

I think that this is not what was intended when you added new field in
mm_context_t.

In this patch the MMCF_AARCH32 flag is introduced, where MMCF prefix stands for
mm_context_t flags. And the new flag is used for uprobes code instead of TIF_32BIT.

Yury

Signed-off-by: Yury Norov <[email protected]>
---
arch/arm64/include/asm/elf.h | 4 ++--
arch/arm64/include/asm/mmu.h | 2 ++
arch/arm64/kernel/probes/uprobes.c | 2 +-
3 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h
index acae781f7359..de11ed1484e3 100644
--- a/arch/arm64/include/asm/elf.h
+++ b/arch/arm64/include/asm/elf.h
@@ -139,7 +139,7 @@ typedef struct user_fpsimd_state elf_fpregset_t;

#define SET_PERSONALITY(ex) \
({ \
- clear_bit(TIF_32BIT, &current->mm->context.flags); \
+ clear_bit(MMCF_AARCH32, &current->mm->context.flags); \
clear_thread_flag(TIF_32BIT); \
current->personality &= ~READ_IMPLIES_EXEC; \
})
@@ -195,7 +195,7 @@ typedef compat_elf_greg_t compat_elf_gregset_t[COMPAT_ELF_NGREG];
*/
#define COMPAT_SET_PERSONALITY(ex) \
({ \
- set_bit(TIF_32BIT, &current->mm->context.flags); \
+ set_bit(MMCF_AARCH32, &current->mm->context.flags); \
set_thread_flag(TIF_32BIT); \
})
#define COMPAT_ARCH_DLINFO
diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h
index 5468c834b072..3ae24ed11ae3 100644
--- a/arch/arm64/include/asm/mmu.h
+++ b/arch/arm64/include/asm/mmu.h
@@ -16,6 +16,8 @@
#ifndef __ASM_MMU_H
#define __ASM_MMU_H

+#define MMCF_AARCH32 0x1
+
typedef struct {
atomic64_t id;
void *vdso;
diff --git a/arch/arm64/kernel/probes/uprobes.c b/arch/arm64/kernel/probes/uprobes.c
index 26c998534dca..f29ef6b297e4 100644
--- a/arch/arm64/kernel/probes/uprobes.c
+++ b/arch/arm64/kernel/probes/uprobes.c
@@ -40,7 +40,7 @@ int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm,
probe_opcode_t insn;

/* TODO: Currently we do not support AARCH32 instruction probing */
- if (test_bit(TIF_32BIT, &mm->context.flags))
+ if (test_bit(MMCF_AARCH32, &mm->context.flags))
return -ENOTSUPP;
else if (!IS_ALIGNED(addr, AARCH64_INSN_SIZE))
return -EINVAL;
--
2.11.0


2017-08-01 03:40:10

by Pratyush Anand

[permalink] [raw]
Subject: Re: [PATCH RFC] arm64: introduce mm_context_t flags



On Monday 31 July 2017 08:18 PM, Yury Norov wrote:
> - If we start using TIF flags here, we cannot easily add new mm_context
> specific bits because they may mess with TIF ones.

This one seems convincing argument. ATM do you have any mm_context flag which
would you like to incorporate?

>
> I think that this is not what was intended when you added new field in
> mm_context_t.
>
> In this patch the MMCF_AARCH32 flag is introduced, where MMCF prefix stands for
> mm_context_t flags. And the new flag is used for uprobes code instead of TIF_32BIT.

--
Regards
Pratyush

2017-08-01 11:37:26

by Yury Norov

[permalink] [raw]
Subject: Re: [PATCH RFC] arm64: introduce mm_context_t flags

On Tue, Aug 01, 2017 at 09:10:05AM +0530, Pratyush Anand wrote:
>
>
> On Monday 31 July 2017 08:18 PM, Yury Norov wrote:
> > - If we start using TIF flags here, we cannot easily add new mm_context
> > specific bits because they may mess with TIF ones.
>
> This one seems convincing argument. ATM do you have any mm_context flag
> which would you like to incorporate?

I think no

Yury

2017-08-02 16:39:06

by Catalin Marinas

[permalink] [raw]
Subject: Re: [PATCH RFC] arm64: introduce mm_context_t flags

Hi Yury,

On Mon, Jul 31, 2017 at 05:48:25PM +0300, Yury Norov wrote:
> In patch 06beb72fbe23e ("arm64: introduce mm context flag to keep 32 bit task
> information") you introduce the field flags but use it only for a single flag -
> TIF_32BIT. It looks hacky to me for three reasons:
> - The flag is introduced for the case where it's impossible to get the thread
> info structure for the thread associated with mm. So thread_info flags (TIF)
> may also be unavailable at place. This is not the case for the only existing
> user of if - uprobes, but in general this approach requires to include thread
> headers in mm code, which may become unwanted dependency.
> - New flag, if it uses TIF bits, for consistency should for example set/clear
> TIF_32BIT_AARCH64 for ILP32 tasks. And to be completely consistent, with
> current approach we'd mirror thread_info flags to mm_context flags. And keep
> it syncronized.
> - If we start using TIF flags here, we cannot easily add new mm_context
> specific bits because they may mess with TIF ones.
>
> I think that this is not what was intended when you added new field in
> mm_context_t.

TIF_32BIT was handy at the time but it indeed denotes AArch32 user
task. For ILP32 we wouldn't need to set this bit since the instruction
set is A64 and uprobe should support it (though not sure anyone tried).
I noticed in your patch introducing binfmt_ilp32.c that SET_PERSONALITY
actually sets this flag in the mm context.

As with the TIF bits, the PERSONALITY macros become more complicated
with more bits to set/clear. Since we don't have any plans for other mm
context flags (independent of TIF), should we simply rename it to
thread_flags and just copy the thread_info flags:

current->mm->context.thread_flags = current_thread_info()->flags;

--
Catalin

2017-08-02 17:30:26

by Yury Norov

[permalink] [raw]
Subject: Re: [PATCH RFC] arm64: introduce mm_context_t flags

On Wed, Aug 02, 2017 at 05:39:01PM +0100, Catalin Marinas wrote:
> Hi Yury,
>
> On Mon, Jul 31, 2017 at 05:48:25PM +0300, Yury Norov wrote:
> > In patch 06beb72fbe23e ("arm64: introduce mm context flag to keep 32 bit task
> > information") you introduce the field flags but use it only for a single flag -
> > TIF_32BIT. It looks hacky to me for three reasons:
> > - The flag is introduced for the case where it's impossible to get the thread
> > info structure for the thread associated with mm. So thread_info flags (TIF)
> > may also be unavailable at place. This is not the case for the only existing
> > user of if - uprobes, but in general this approach requires to include thread
> > headers in mm code, which may become unwanted dependency.
> > - New flag, if it uses TIF bits, for consistency should for example set/clear
> > TIF_32BIT_AARCH64 for ILP32 tasks. And to be completely consistent, with
> > current approach we'd mirror thread_info flags to mm_context flags. And keep
> > it syncronized.
> > - If we start using TIF flags here, we cannot easily add new mm_context
> > specific bits because they may mess with TIF ones.
> >
> > I think that this is not what was intended when you added new field in
> > mm_context_t.
>
> TIF_32BIT was handy at the time but it indeed denotes AArch32 user
> task. For ILP32 we wouldn't need to set this bit since the instruction
> set is A64 and uprobe should support it (though not sure anyone tried).
> I noticed in your patch introducing binfmt_ilp32.c that SET_PERSONALITY
> actually sets this flag in the mm context.

Depending on what will be decided here, I'll change ilp32 patch
accordingly.

> As with the TIF bits, the PERSONALITY macros become more complicated
> with more bits to set/clear. Since we don't have any plans for other mm
> context flags (independent of TIF), should we simply rename it to
> thread_flags and just copy the thread_info flags:
>
> current->mm->context.thread_flags = current_thread_info()->flags;

This will also work. But it may raise questions to one who reads the
code.
- if mm_context needs the threads flags, why you copy it? Why not to
move flags to the mm_context_t? It is always available for
thread_info users.
- for multithreaded applications there might be different set of bits
in the flags field in different theads. So what exactly will be in
context.thread_flags is a matter of case, and you'd explain somehow
which bits are reliable, and which are not.
- It doesn't sound convincing to me that there are no other candidates
for mm_context.flags bits. 6 month ago we didn't need the flags at all.
ARM64 is under intensive development, and it's highly probable that
candidates may appear one day.

I don't like to add new types as well, but at the case I think, this is
the most straightforward and simple way to introduce new set of bits for
new bitfield. And also less questionable in maintenance perspective.

Yury

2017-08-04 17:38:15

by Catalin Marinas

[permalink] [raw]
Subject: Re: [PATCH RFC] arm64: introduce mm_context_t flags

On Wed, Aug 02, 2017 at 08:29:40PM +0300, Yury Norov wrote:
> On Wed, Aug 02, 2017 at 05:39:01PM +0100, Catalin Marinas wrote:
> > On Mon, Jul 31, 2017 at 05:48:25PM +0300, Yury Norov wrote:
> > > In patch 06beb72fbe23e ("arm64: introduce mm context flag to keep 32 bit task
> > > information") you introduce the field flags but use it only for a single flag -
> > > TIF_32BIT. It looks hacky to me for three reasons:
> > > - The flag is introduced for the case where it's impossible to get the thread
> > > info structure for the thread associated with mm. So thread_info flags (TIF)
> > > may also be unavailable at place. This is not the case for the only existing
> > > user of if - uprobes, but in general this approach requires to include thread
> > > headers in mm code, which may become unwanted dependency.
> > > - New flag, if it uses TIF bits, for consistency should for example set/clear
> > > TIF_32BIT_AARCH64 for ILP32 tasks. And to be completely consistent, with
> > > current approach we'd mirror thread_info flags to mm_context flags. And keep
> > > it syncronized.
> > > - If we start using TIF flags here, we cannot easily add new mm_context
> > > specific bits because they may mess with TIF ones.
> > >
> > > I think that this is not what was intended when you added new field in
> > > mm_context_t.
> >
> > TIF_32BIT was handy at the time but it indeed denotes AArch32 user
> > task. For ILP32 we wouldn't need to set this bit since the instruction
> > set is A64 and uprobe should support it (though not sure anyone tried).
> > I noticed in your patch introducing binfmt_ilp32.c that SET_PERSONALITY
> > actually sets this flag in the mm context.
>
> Depending on what will be decided here, I'll change ilp32 patch
> accordingly.

Since this was meant to keep track of AArch32 tasks, the ILP32
personality macros need to clear it.

> > As with the TIF bits, the PERSONALITY macros become more complicated
> > with more bits to set/clear. Since we don't have any plans for other mm
> > context flags (independent of TIF), should we simply rename it to
> > thread_flags and just copy the thread_info flags:
> >
> > current->mm->context.thread_flags = current_thread_info()->flags;
>
> This will also work. But it may raise questions to one who reads the
> code.
> - if mm_context needs the threads flags, why you copy it? Why not to
> move flags to the mm_context_t? It is always available for
> thread_info users.
> - for multithreaded applications there might be different set of bits
> in the flags field in different theads. So what exactly will be in
> context.thread_flags is a matter of case, and you'd explain somehow
> which bits are reliable, and which are not.

That's a valid argument.

> - It doesn't sound convincing to me that there are no other candidates
> for mm_context.flags bits. 6 month ago we didn't need the flags at all.
> ARM64 is under intensive development, and it's highly probable that
> candidates may appear one day.

I'm fine with changing the macro to MMCF_AARCH32, however, could move
the flag setting out of the SET_PERSONALITY macros, just to keep these
macros strictly to the TIF flags? We can probably add it to
arch_setup_new_exec(), something like:

static inline void arch_setup_new_exec(void)
{
current->mm->context.flags = 0;
if (test_thread_flag(TIF_32BIT))
current->mm->context.flags |= MMCF_AARCH32;
}
#define arch_setup_new_exec arch_setup_new_exec

I would go for always initialising the flags to 0 rather than clearing
certain bits, just to make it clear that we don't inherit them.

--
Catalin

2017-08-04 21:49:35

by Yury Norov

[permalink] [raw]
Subject: Re: [PATCH RFC] arm64: introduce mm_context_t flags

On Fri, Aug 04, 2017 at 06:38:10PM +0100, Catalin Marinas wrote:
> On Wed, Aug 02, 2017 at 08:29:40PM +0300, Yury Norov wrote:
> > On Wed, Aug 02, 2017 at 05:39:01PM +0100, Catalin Marinas wrote:
> > > On Mon, Jul 31, 2017 at 05:48:25PM +0300, Yury Norov wrote:
> > > > In patch 06beb72fbe23e ("arm64: introduce mm context flag to keep 32 bit task
> > > > information") you introduce the field flags but use it only for a single flag -
> > > > TIF_32BIT. It looks hacky to me for three reasons:
> > > > - The flag is introduced for the case where it's impossible to get the thread
> > > > info structure for the thread associated with mm. So thread_info flags (TIF)
> > > > may also be unavailable at place. This is not the case for the only existing
> > > > user of if - uprobes, but in general this approach requires to include thread
> > > > headers in mm code, which may become unwanted dependency.
> > > > - New flag, if it uses TIF bits, for consistency should for example set/clear
> > > > TIF_32BIT_AARCH64 for ILP32 tasks. And to be completely consistent, with
> > > > current approach we'd mirror thread_info flags to mm_context flags. And keep
> > > > it syncronized.
> > > > - If we start using TIF flags here, we cannot easily add new mm_context
> > > > specific bits because they may mess with TIF ones.
> > > >
> > > > I think that this is not what was intended when you added new field in
> > > > mm_context_t.
> > >
> > > TIF_32BIT was handy at the time but it indeed denotes AArch32 user
> > > task. For ILP32 we wouldn't need to set this bit since the instruction
> > > set is A64 and uprobe should support it (though not sure anyone tried).
> > > I noticed in your patch introducing binfmt_ilp32.c that SET_PERSONALITY
> > > actually sets this flag in the mm context.
> >
> > Depending on what will be decided here, I'll change ilp32 patch
> > accordingly.
>
> Since this was meant to keep track of AArch32 tasks, the ILP32
> personality macros need to clear it.

I understand it. I meant that the exact fix will depend on what we
will figure out here.

I have also fixed small issue with headers in the patch "arm64: signal:
share lp64 signal structures and routines to ilp32", so I think I will
create rc4-based branch that will incorporate all changes. But if you
need I can also update rc3-based branch. And 4.12 - do you need the
updated version of it?

> > > As with the TIF bits, the PERSONALITY macros become more complicated
> > > with more bits to set/clear. Since we don't have any plans for other mm
> > > context flags (independent of TIF), should we simply rename it to
> > > thread_flags and just copy the thread_info flags:
> > >
> > > current->mm->context.thread_flags = current_thread_info()->flags;
> >
> > This will also work. But it may raise questions to one who reads the
> > code.
> > - if mm_context needs the threads flags, why you copy it? Why not to
> > move flags to the mm_context_t? It is always available for
> > thread_info users.
> > - for multithreaded applications there might be different set of bits
> > in the flags field in different theads. So what exactly will be in
> > context.thread_flags is a matter of case, and you'd explain somehow
> > which bits are reliable, and which are not.
>
> That's a valid argument.
>
> > - It doesn't sound convincing to me that there are no other candidates
> > for mm_context.flags bits. 6 month ago we didn't need the flags at all.
> > ARM64 is under intensive development, and it's highly probable that
> > candidates may appear one day.
>
> I'm fine with changing the macro to MMCF_AARCH32, however, could move
> the flag setting out of the SET_PERSONALITY macros, just to keep these
> macros strictly to the TIF flags? We can probably add it to
> arch_setup_new_exec(), something like:
>
> static inline void arch_setup_new_exec(void)
> {
> current->mm->context.flags = 0;
> if (test_thread_flag(TIF_32BIT))
> current->mm->context.flags |= MMCF_AARCH32;
> }
> #define arch_setup_new_exec arch_setup_new_exec
>
> I would go for always initialising the flags to 0 rather than clearing
> certain bits, just to make it clear that we don't inherit them.

Looks even better. I will take it and send the patch soon.

Yury

2017-08-07 11:09:02

by Catalin Marinas

[permalink] [raw]
Subject: Re: [PATCH RFC] arm64: introduce mm_context_t flags

On Sat, Aug 05, 2017 at 12:49:19AM +0300, Yury Norov wrote:
> On Fri, Aug 04, 2017 at 06:38:10PM +0100, Catalin Marinas wrote:
> > On Wed, Aug 02, 2017 at 08:29:40PM +0300, Yury Norov wrote:
> > > On Wed, Aug 02, 2017 at 05:39:01PM +0100, Catalin Marinas wrote:
> > > > On Mon, Jul 31, 2017 at 05:48:25PM +0300, Yury Norov wrote:
> > > > > In patch 06beb72fbe23e ("arm64: introduce mm context flag to keep 32 bit task
> > > > > information") you introduce the field flags but use it only for a single flag -
> > > > > TIF_32BIT. It looks hacky to me for three reasons:
> > > > > - The flag is introduced for the case where it's impossible to get the thread
> > > > > info structure for the thread associated with mm. So thread_info flags (TIF)
> > > > > may also be unavailable at place. This is not the case for the only existing
> > > > > user of if - uprobes, but in general this approach requires to include thread
> > > > > headers in mm code, which may become unwanted dependency.
> > > > > - New flag, if it uses TIF bits, for consistency should for example set/clear
> > > > > TIF_32BIT_AARCH64 for ILP32 tasks. And to be completely consistent, with
> > > > > current approach we'd mirror thread_info flags to mm_context flags. And keep
> > > > > it syncronized.
> > > > > - If we start using TIF flags here, we cannot easily add new mm_context
> > > > > specific bits because they may mess with TIF ones.
> > > > >
> > > > > I think that this is not what was intended when you added new field in
> > > > > mm_context_t.
> > > >
> > > > TIF_32BIT was handy at the time but it indeed denotes AArch32 user
> > > > task. For ILP32 we wouldn't need to set this bit since the instruction
> > > > set is A64 and uprobe should support it (though not sure anyone tried).
> > > > I noticed in your patch introducing binfmt_ilp32.c that SET_PERSONALITY
> > > > actually sets this flag in the mm context.
> > >
> > > Depending on what will be decided here, I'll change ilp32 patch
> > > accordingly.
> >
> > Since this was meant to keep track of AArch32 tasks, the ILP32
> > personality macros need to clear it.
>
> I understand it. I meant that the exact fix will depend on what we
> will figure out here.
>
> I have also fixed small issue with headers in the patch "arm64: signal:
> share lp64 signal structures and routines to ilp32", so I think I will
> create rc4-based branch that will incorporate all changes. But if you
> need I can also update rc3-based branch. And 4.12 - do you need the
> updated version of it?

Not for 4.12, I'll just take it as it is with a fixup for
SET_PERSONALITY. I will hold off with an 4.13 branch until the final
4.13 is actually released, so you can rebase your -rc3/rc4 branch.

--
Catalin