From: Crt Mori <[email protected]>
The current EINVAL value is more applicable to embedded library, where
user can actually put the fixed value to the sensor. In case of the
driver if the value of the channel is invalid it is better in inform
userspace that Channel was out of range as that implies more to internal
driver error than invalid input. It also makes for easier debugging of
where the error comes from during the development.
Signed-off-by: Crt Mori <[email protected]>
---
drivers/iio/temperature/mlx90632.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c
index 6b33284eb0b6..aee065a38772 100644
--- a/drivers/iio/temperature/mlx90632.c
+++ b/drivers/iio/temperature/mlx90632.c
@@ -436,7 +436,7 @@ static int mlx90632_channel_new_select(int perform_ret, uint8_t *channel_new,
*channel_old = 1;
break;
default:
- return -EINVAL;
+ return -ECHRNG;
}
return 0;
--
2.34.1
On Tue, Sep 6, 2022 at 12:05 PM <[email protected]> wrote:
>
> From: Crt Mori <[email protected]>
>
> The current EINVAL value is more applicable to embedded library, where
an embedded
...or...
libraries
> user can actually put the fixed value to the sensor. In case of the
> driver if the value of the channel is invalid it is better in inform
> userspace that Channel was out of range as that implies more to internal
> driver error than invalid input. It also makes for easier debugging of
> where the error comes from during the development.
As I said earlier I'm in favour of this change to at least make good
use of this error code since it is confirmed to help debugging.
Reviewed-by: Andy Shevchenko <[email protected]>
> Signed-off-by: Crt Mori <[email protected]>
> ---
> drivers/iio/temperature/mlx90632.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c
> index 6b33284eb0b6..aee065a38772 100644
> --- a/drivers/iio/temperature/mlx90632.c
> +++ b/drivers/iio/temperature/mlx90632.c
> @@ -436,7 +436,7 @@ static int mlx90632_channel_new_select(int perform_ret, uint8_t *channel_new,
> *channel_old = 1;
> break;
> default:
> - return -EINVAL;
> + return -ECHRNG;
> }
>
> return 0;
> --
> 2.34.1
>
--
With Best Regards,
Andy Shevchenko