This is the start of the stable review cycle for the 5.10.104 release.
There are 105 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed, 09 Mar 2022 09:16:25 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.104-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.10.104-rc1
Jiri Bohac <[email protected]>
Revert "xfrm: xfrm_state_mtu should return at least 1280 for ipv6"
Filipe Manana <[email protected]>
btrfs: add missing run of delayed items after unlink during log replay
Sidong Yang <[email protected]>
btrfs: qgroup: fix deadlock between rescan worker and remove qgroup
Filipe Manana <[email protected]>
btrfs: fix lost prealloc extents beyond eof after full fsync
Randy Dunlap <[email protected]>
tracing: Fix return value of __setup handlers
Steven Rostedt (Google) <[email protected]>
tracing/histogram: Fix sorting on old "cpu" value
William Mahon <[email protected]>
HID: add mapping for KEY_ALL_APPLICATIONS
William Mahon <[email protected]>
HID: add mapping for KEY_DICTATE
David Gow <[email protected]>
Input: samsung-keypad - properly state IOMEM dependency
Hans de Goede <[email protected]>
Input: elan_i2c - fix regulator enable count imbalance after suspend/resume
Hans de Goede <[email protected]>
Input: elan_i2c - move regulator_[en|dis]able() out of elan_[en|dis]able_power()
Vladimir Oltean <[email protected]>
net: dcb: disable softirqs in dcbnl_flush_dev()
Qiang Yu <[email protected]>
drm/amdgpu: fix suspend/resume hang regression
Jiasheng Jiang <[email protected]>
nl80211: Handle nla_memdup failures in handle_nan_filter
Mateusz Palczewski <[email protected]>
iavf: Refactor iavf state machine tracking
Jia-Ju Bai <[email protected]>
net: chelsio: cxgb3: check the return value of pci_find_capability()
Sukadev Bhattiprolu <[email protected]>
ibmvnic: complete init_done on transport events
Sukadev Bhattiprolu <[email protected]>
ibmvnic: define flush_reset_queue helper
Thierry Reding <[email protected]>
ARM: tegra: Move panels to AUX bus
Jiasheng Jiang <[email protected]>
soc: fsl: qe: Check of ioremap return value
Christophe JAILLET <[email protected]>
soc: fsl: guts: Add a missing memory allocation failure check
Christophe JAILLET <[email protected]>
soc: fsl: guts: Revert commit 3c0d64e867ed
Anthoine Bourgeois <[email protected]>
ARM: dts: Use 32KiHz oscillator on devkit8000
Anthoine Bourgeois <[email protected]>
ARM: dts: switch timer config to common devkit8000 devicetree
Heiko Carstens <[email protected]>
s390/extable: fix exception table sorting
Hugh Dickins <[email protected]>
memfd: fix F_SEAL_WRITE after shmem huge page allocated
Sukadev Bhattiprolu <[email protected]>
ibmvnic: free reset-work-item when flushing
Sasha Neftin <[email protected]>
igc: igc_write_phy_reg_gpy: drop premature return
Samuel Holland <[email protected]>
pinctrl: sunxi: Use unique lockdep classes for IRQs
Amit Cohen <[email protected]>
selftests: mlxsw: tc_police_scale: Make test more robust
Randy Dunlap <[email protected]>
ARM: 9182/1: mmu: fix returns from early_param() and __setup() functions
Russell King (Oracle) <[email protected]>
ARM: Fix kgdb breakpoint for Thumb2
Corinna Vinschen <[email protected]>
igc: igc_read_phy_reg_gpy: drop premature return
Brian Norris <[email protected]>
arm64: dts: rockchip: Switch RK3399-Gru DP to SPDIF output
Vincent Mailhol <[email protected]>
can: gs_usb: change active_channels's type from atomic_t to u8
Fabio Estevam <[email protected]>
ASoC: cs4265: Fix the duplicated control name
Alyssa Ross <[email protected]>
firmware: arm_scmi: Remove space in MODULE_ALIAS name
Jann Horn <[email protected]>
efivars: Respect "block" flag in efivar_entry_set_safe()
Maciej Fijalkowski <[email protected]>
ixgbe: xsk: change !netif_carrier_ok() handling in ixgbe_xmit_zc()
Zheyu Ma <[email protected]>
net: arcnet: com20020: Fix null-ptr-deref in com20020pci_probe()
Sukadev Bhattiprolu <[email protected]>
ibmvnic: register netdev after init of adapter
Randy Dunlap <[email protected]>
net: sxgbe: fix return value of __setup handler
Slawomir Laba <[email protected]>
iavf: Fix missing check for running netdev
Johannes Berg <[email protected]>
mac80211: treat some SAE auth steps as final
Randy Dunlap <[email protected]>
net: stmmac: fix return value of __setup handler
Nicolas Escande <[email protected]>
mac80211: fix forwarded mesh frames AC & queue selection
Valentin Schneider <[email protected]>
ia64: ensure proper NUMA distance and possible map initialization
Dietmar Eggemann <[email protected]>
sched/topology: Fix sched_domain_topology_level alloc in sched_init_numa()
Valentin Schneider <[email protected]>
sched/topology: Make sched_init_numa() use a set for the deduplicating sort
Jacob Keller <[email protected]>
ice: fix concurrent reset and removal of VFs
Brett Creeley <[email protected]>
ice: Fix race conditions between virtchnl handling and VF ndo ops
Frederic Weisbecker <[email protected]>
rcu/nocb: Fix missed nocb_timer requeue
D. Wythe <[email protected]>
net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error cause by server
D. Wythe <[email protected]>
net/smc: fix unexpected SMC_CLC_DECL_ERR_REGRMB error generated by client
D. Wythe <[email protected]>
net/smc: fix connection leak
Vladimir Oltean <[email protected]>
net: dcb: flush lingering app table entries for unregistered devices
[email protected] <[email protected]>
net: ipv6: ensure we call ipv6_mc_down() at most once
Sven Eckelmann <[email protected]>
batman-adv: Don't expect inter-netns unique iflink indices
Sven Eckelmann <[email protected]>
batman-adv: Request iflink once in batadv_get_real_netdevice
Sven Eckelmann <[email protected]>
batman-adv: Request iflink once in batadv-on-batadv check
Florian Westphal <[email protected]>
netfilter: nf_queue: handle socket prefetch
Florian Westphal <[email protected]>
netfilter: nf_queue: fix possible use-after-free
Florian Westphal <[email protected]>
netfilter: nf_queue: don't assume sk is full socket
lena wang <[email protected]>
net: fix up skbs delta_truesize in UDP GRO frag_list
Sasha Neftin <[email protected]>
e1000e: Correct NVM checksum verification flow
Leon Romanovsky <[email protected]>
xfrm: enforce validity of offload input flags
Antony Antony <[email protected]>
xfrm: fix the if_id check in changelink
Eric Dumazet <[email protected]>
bpf, sockmap: Do not ignore orig_len parameter
Eric Dumazet <[email protected]>
netfilter: fix use-after-free in __nf_register_net_hook()
Jiri Bohac <[email protected]>
xfrm: fix MTU regression
Daniel Borkmann <[email protected]>
mm: Consider __GFP_NOWARN flag for oversized kvmalloc() calls
Dave Jiang <[email protected]>
ntb: intel: fix port config status offset for SPR
Nicolas Cavallari <[email protected]>
thermal: core: Fix TZ_GET_TRIP NULL pointer dereference
Marek Marczykowski-Górecki <[email protected]>
xen/netfront: destroy queues before real_num_tx_queues is zeroed
Ville Syrjälä <[email protected]>
drm/i915: s/JSP2/ICP2/ PCH
Lennert Buytenhek <[email protected]>
iommu/amd: Recover from event log overflow
Marek Vasut <[email protected]>
ASoC: ops: Shift tested values in snd_soc_put_volsw() by +min
Alexandre Ghiti <[email protected]>
riscv: Fix config KASAN && DEBUG_VIRTUAL
Alexandre Ghiti <[email protected]>
riscv: Fix config KASAN && SPARSEMEM && !SPARSE_VMEMMAP
Sunil V L <[email protected]>
riscv/efi_stub: Fix get_boot_hartid_from_fdt() return value
Zhen Ni <[email protected]>
ALSA: intel_hdmi: Fix reference to PCM buffer address
Steven Rostedt <[email protected]>
tracing: Add ustring operation to filtering string pointers
Qiang Yu <[email protected]>
drm/amdgpu: check vm ready by amdgpu_vm->evicting flag
Sergey Shtylyov <[email protected]>
ata: pata_hpt37x: fix PCI clock detection
Valentin Caron <[email protected]>
serial: stm32: prevent TDR register overwrite when sending x_char
Steven Rostedt <[email protected]>
tracing: Add test for user space strings when filtering on string pointers
Christophe Vu-Brugier <[email protected]>
exfat: fix i_blocks for files truncated over 4 GiB
Christophe Vu-Brugier <[email protected]>
exfat: reuse exfat_inode_info variable instead of calling EXFAT_I()
Hangyu Hua <[email protected]>
usb: gadget: clear related members when goto fail
Hangyu Hua <[email protected]>
usb: gadget: don't release an existing dev->buf
Daniele Palmas <[email protected]>
net: usb: cdc_mbim: avoid altsetting toggling for Telit FN990
Wolfram Sang <[email protected]>
i2c: qup: allow COMPILE_TEST
Wolfram Sang <[email protected]>
i2c: cadence: allow COMPILE_TEST
Yongzhi Liu <[email protected]>
dmaengine: shdma: Fix runtime PM imbalance on error
Sherry Yang <[email protected]>
selftests/seccomp: Fix seccomp failure by adding missing headers
Ronnie Sahlberg <[email protected]>
cifs: fix double free race when mount fails in cifs_get_root()
Hangyu Hua <[email protected]>
tipc: fix a bit overflow in tipc_crypto_key_rcv()
Marc Zyngier <[email protected]>
KVM: arm64: vgic: Read HW interrupt pending state from the HW
José Expósito <[email protected]>
Input: clear BTN_RIGHT/MIDDLE on buttonpads
Oliver Barta <[email protected]>
regulator: core: fix false positive in regulator_late_cleanup()
Kai Vehmanen <[email protected]>
ASoC: rt5682: do not block workqueue if card is unbound
Kai Vehmanen <[email protected]>
ASoC: rt5668: do not block workqueue if card is unbound
Eric Anholt <[email protected]>
i2c: bcm2835: Avoid clock stretching timeouts
JaeMan Park <[email protected]>
mac80211_hwsim: initialize ieee80211_tx_info at hw_scan_work
Benjamin Beichler <[email protected]>
mac80211_hwsim: report NOACK frames in tx_status
-------------
Diffstat:
Documentation/trace/events.rst | 19 ++++
Makefile | 4 +-
arch/arm/boot/dts/omap3-devkit8000-common.dtsi | 18 ++++
arch/arm/boot/dts/omap3-devkit8000.dts | 33 -------
arch/arm/boot/dts/tegra124-nyan-big.dts | 15 +--
arch/arm/boot/dts/tegra124-nyan-blaze.dts | 15 +--
arch/arm/boot/dts/tegra124-venice2.dts | 14 +--
arch/arm/kernel/kgdb.c | 36 +++++--
arch/arm/mm/mmu.c | 2 +
arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 17 +++-
arch/arm64/kvm/vgic/vgic-mmio.c | 2 +
arch/ia64/kernel/acpi.c | 7 +-
arch/riscv/mm/Makefile | 3 +
arch/riscv/mm/kasan_init.c | 3 +-
arch/s390/include/asm/extable.h | 9 +-
drivers/ata/pata_hpt37x.c | 4 +-
drivers/clocksource/timer-ti-dm-systimer.c | 3 +-
drivers/dma/sh/shdma-base.c | 4 +-
drivers/firmware/arm_scmi/driver.c | 2 +-
drivers/firmware/efi/libstub/riscv-stub.c | 17 ++--
drivers/firmware/efi/vars.c | 5 +-
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 10 +-
drivers/gpu/drm/i915/intel_pch.c | 2 +-
drivers/gpu/drm/i915/intel_pch.h | 2 +-
drivers/hid/hid-debug.c | 5 +-
drivers/hid/hid-input.c | 3 +
drivers/i2c/busses/Kconfig | 4 +-
drivers/i2c/busses/i2c-bcm2835.c | 11 +++
drivers/input/input.c | 6 ++
drivers/input/keyboard/Kconfig | 2 +-
drivers/input/mouse/elan_i2c_core.c | 64 +++++-------
drivers/iommu/amd/amd_iommu.h | 1 +
drivers/iommu/amd/amd_iommu_types.h | 1 +
drivers/iommu/amd/init.c | 10 ++
drivers/iommu/amd/iommu.c | 10 +-
drivers/net/arcnet/com20020-pci.c | 3 +
drivers/net/can/usb/gs_usb.c | 10 +-
drivers/net/ethernet/chelsio/cxgb3/t3_hw.c | 2 +
drivers/net/ethernet/ibm/ibmvnic.c | 39 ++++++--
drivers/net/ethernet/intel/e1000e/ich8lan.c | 4 +-
drivers/net/ethernet/intel/iavf/iavf.h | 10 ++
drivers/net/ethernet/intel/iavf/iavf_main.c | 44 +++++----
drivers/net/ethernet/intel/iavf/iavf_virtchnl.c | 2 +-
drivers/net/ethernet/intel/ice/ice_main.c | 2 +
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 58 +++++++++--
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h | 5 +
drivers/net/ethernet/intel/igc/igc_phy.c | 4 -
drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c | 6 +-
drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c | 6 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +-
drivers/net/usb/cdc_mbim.c | 5 +
drivers/net/wireless/mac80211_hwsim.c | 13 +++
drivers/net/xen-netfront.c | 39 +++++---
drivers/ntb/hw/intel/ntb_hw_gen4.c | 17 +++-
drivers/ntb/hw/intel/ntb_hw_gen4.h | 16 +++
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 9 ++
drivers/regulator/core.c | 13 +--
drivers/soc/fsl/guts.c | 14 ++-
drivers/soc/fsl/qe/qe_io.c | 2 +
drivers/thermal/thermal_netlink.c | 5 +-
drivers/tty/serial/stm32-usart.c | 12 +++
drivers/usb/gadget/legacy/inode.c | 10 +-
fs/btrfs/qgroup.c | 9 +-
fs/btrfs/tree-log.c | 61 +++++++++---
fs/cifs/cifsfs.c | 1 +
fs/exfat/file.c | 18 ++--
fs/exfat/inode.c | 13 ++-
fs/exfat/namei.c | 6 +-
fs/exfat/super.c | 10 +-
include/linux/topology.h | 1 +
include/net/netfilter/nf_queue.h | 2 +-
include/net/xfrm.h | 1 -
include/uapi/linux/input-event-codes.h | 4 +-
include/uapi/linux/xfrm.h | 6 ++
kernel/rcu/tree_plugin.h | 7 +-
kernel/sched/topology.c | 99 +++++++++----------
kernel/trace/trace.c | 4 +-
kernel/trace/trace_events_filter.c | 107 +++++++++++++++++++--
kernel/trace/trace_events_hist.c | 6 +-
kernel/trace/trace_kprobe.c | 2 +-
mm/memfd.c | 40 +++++---
mm/util.c | 4 +-
net/batman-adv/hard-interface.c | 29 ++++--
net/core/skbuff.c | 2 +-
net/core/skmsg.c | 2 +-
net/dcb/dcbnl.c | 44 +++++++++
net/ipv4/esp4.c | 2 +-
net/ipv6/addrconf.c | 8 +-
net/ipv6/esp6.c | 2 +-
net/ipv6/ip6_output.c | 11 ++-
net/mac80211/ieee80211_i.h | 2 +-
net/mac80211/mlme.c | 16 ++-
net/mac80211/rx.c | 4 +-
net/netfilter/core.c | 5 +-
net/netfilter/nf_queue.c | 36 ++++++-
net/netfilter/nfnetlink_queue.c | 12 ++-
net/smc/af_smc.c | 10 +-
net/smc/smc_core.c | 5 +-
net/tipc/crypto.c | 2 +-
net/wireless/nl80211.c | 12 +++
net/xfrm/xfrm_device.c | 6 +-
net/xfrm/xfrm_interface.c | 2 +-
net/xfrm/xfrm_state.c | 14 +--
sound/soc/codecs/cs4265.c | 3 +-
sound/soc/codecs/rt5668.c | 12 ++-
sound/soc/codecs/rt5682.c | 12 ++-
sound/soc/soc-ops.c | 4 +-
sound/x86/intel_hdmi_audio.c | 2 +-
.../selftests/drivers/net/mlxsw/tc_police_scale.sh | 3 +-
tools/testing/selftests/seccomp/Makefile | 2 +-
110 files changed, 960 insertions(+), 424 deletions(-)
From: Wolfram Sang <[email protected]>
[ Upstream commit 5de717974005fcad2502281e9f82e139ca91f4bb ]
Driver builds fine with COMPILE_TEST. Enable it for wider test coverage
and easier maintenance.
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index d5fc8ec025020..ea474b16e3aac 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -926,7 +926,7 @@ config I2C_QCOM_GENI
config I2C_QUP
tristate "Qualcomm QUP based I2C controller"
- depends on ARCH_QCOM
+ depends on ARCH_QCOM || COMPILE_TEST
help
If you say yes to this option, support will be included for the
built-in I2C interface on the Qualcomm SoCs.
--
2.34.1
From: Marc Zyngier <[email protected]>
[ Upstream commit 5bfa685e62e9ba93c303a9a8db646c7228b9b570 ]
It appears that a read access to GIC[DR]_I[CS]PENDRn doesn't always
result in the pending interrupts being accurately reported if they are
mapped to a HW interrupt. This is particularily visible when acking
the timer interrupt and reading the GICR_ISPENDR1 register immediately
after, for example (the interrupt appears as not-pending while it really
is...).
This is because a HW interrupt has its 'active and pending state' kept
in the *physical* distributor, and not in the virtual one, as mandated
by the spec (this is what allows the direct deactivation). The virtual
distributor only caries the pending and active *states* (note the
plural, as these are two independent and non-overlapping states).
Fix it by reading the HW state back, either from the timer itself or
from the distributor if necessary.
Reported-by: Ricardo Koller <[email protected]>
Tested-by: Ricardo Koller <[email protected]>
Reviewed-by: Ricardo Koller <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/kvm/vgic/vgic-mmio.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/kvm/vgic/vgic-mmio.c b/arch/arm64/kvm/vgic/vgic-mmio.c
index b2d73fc0d1ef4..9e1459534ce54 100644
--- a/arch/arm64/kvm/vgic/vgic-mmio.c
+++ b/arch/arm64/kvm/vgic/vgic-mmio.c
@@ -248,6 +248,8 @@ unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
IRQCHIP_STATE_PENDING,
&val);
WARN_RATELIMIT(err, "IRQ %d", irq->host_irq);
+ } else if (vgic_irq_is_mapped_level(irq)) {
+ val = vgic_get_phys_line_level(irq);
} else {
val = irq_is_pending(irq);
}
--
2.34.1
From: Oliver Barta <[email protected]>
[ Upstream commit 4e2a354e3775870ca823f1fb29bbbffbe11059a6 ]
The check done by regulator_late_cleanup() to detect whether a regulator
is on was inconsistent with the check done by _regulator_is_enabled().
While _regulator_is_enabled() takes the enable GPIO into account,
regulator_late_cleanup() was not doing that.
This resulted in a false positive, e.g. when a GPIO-controlled fixed
regulator was used, which was not enabled at boot time, e.g.
reg_disp_1v2: reg_disp_1v2 {
compatible = "regulator-fixed";
regulator-name = "display_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
gpio = <&tlmm 148 0>;
enable-active-high;
};
Such regulator doesn't have an is_enabled() operation. Nevertheless
it's state can be determined based on the enable GPIO. The check in
regulator_late_cleanup() wrongly assumed that the regulator is on and
tried to disable it.
Signed-off-by: Oliver Barta <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/regulator/core.c | 13 +++----------
1 file changed, 3 insertions(+), 10 deletions(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 043b5f63b94a1..2c48e55c4104e 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -5862,9 +5862,8 @@ core_initcall(regulator_init);
static int regulator_late_cleanup(struct device *dev, void *data)
{
struct regulator_dev *rdev = dev_to_rdev(dev);
- const struct regulator_ops *ops = rdev->desc->ops;
struct regulation_constraints *c = rdev->constraints;
- int enabled, ret;
+ int ret;
if (c && c->always_on)
return 0;
@@ -5877,14 +5876,8 @@ static int regulator_late_cleanup(struct device *dev, void *data)
if (rdev->use_count)
goto unlock;
- /* If we can't read the status assume it's always on. */
- if (ops->is_enabled)
- enabled = ops->is_enabled(rdev);
- else
- enabled = 1;
-
- /* But if reading the status failed, assume that it's off. */
- if (enabled <= 0)
+ /* If reading the status failed, assume that it's off. */
+ if (_regulator_is_enabled(rdev) <= 0)
goto unlock;
if (have_full_constraints()) {
--
2.34.1
From: Daniele Palmas <[email protected]>
[ Upstream commit 21e8a96377e6b6debae42164605bf9dcbe5720c5 ]
Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FN990
0x1071 composition in order to avoid bind error.
Signed-off-by: Daniele Palmas <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/cdc_mbim.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c
index 77ac5a721e7b6..414341c9cf5ae 100644
--- a/drivers/net/usb/cdc_mbim.c
+++ b/drivers/net/usb/cdc_mbim.c
@@ -658,6 +658,11 @@ static const struct usb_device_id mbim_devs[] = {
.driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
},
+ /* Telit FN990 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x1bc7, 0x1071, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+ .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
+ },
+
/* default entry */
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
.driver_info = (unsigned long)&cdc_mbim_info_zlp,
--
2.34.1
From: Hangyu Hua <[email protected]>
commit 89f3594d0de58e8a57d92d497dea9fee3d4b9cda upstream.
dev->buf does not need to be released if it already exists before
executing dev_config.
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Hangyu Hua <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/gadget/legacy/inode.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -1828,8 +1828,9 @@ dev_config (struct file *fd, const char
spin_lock_irq (&dev->lock);
value = -EINVAL;
if (dev->buf) {
+ spin_unlock_irq(&dev->lock);
kfree(kbuf);
- goto fail;
+ return value;
}
dev->buf = kbuf;
From: Wolfram Sang <[email protected]>
[ Upstream commit 0b0dcb3882c8f08bdeafa03adb4487e104d26050 ]
Driver builds fine with COMPILE_TEST. Enable it for wider test coverage
and easier maintenance.
Signed-off-by: Wolfram Sang <[email protected]>
Acked-by: Michal Simek <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/busses/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 7e693dcbdd196..d5fc8ec025020 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -488,7 +488,7 @@ config I2C_BRCMSTB
config I2C_CADENCE
tristate "Cadence I2C Controller"
- depends on ARCH_ZYNQ || ARM64 || XTENSA
+ depends on ARCH_ZYNQ || ARM64 || XTENSA || COMPILE_TEST
help
Say yes here to select Cadence I2C Host Controller. This controller is
e.g. used by Xilinx Zynq.
--
2.34.1
From: Sherry Yang <[email protected]>
[ Upstream commit 21bffcb76ee2fbafc7d5946cef10abc9df5cfff7 ]
seccomp_bpf failed on tests 47 global.user_notification_filter_empty
and 48 global.user_notification_filter_empty_threaded when it's
tested on updated kernel but with old kernel headers. Because old
kernel headers don't have definition of macro __NR_clone3 which is
required for these two tests. Since under selftests/, we can install
headers once for all tests (the default INSTALL_HDR_PATH is
usr/include), fix it by adding usr/include to the list of directories
to be searched. Use "-isystem" to indicate it's a system directory as
the real kernel headers directories are.
Signed-off-by: Sherry Yang <[email protected]>
Tested-by: Sherry Yang <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/seccomp/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/testing/selftests/seccomp/Makefile b/tools/testing/selftests/seccomp/Makefile
index 0ebfe8b0e147f..585f7a0c10cbe 100644
--- a/tools/testing/selftests/seccomp/Makefile
+++ b/tools/testing/selftests/seccomp/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-CFLAGS += -Wl,-no-as-needed -Wall
+CFLAGS += -Wl,-no-as-needed -Wall -isystem ../../../../usr/include/
LDFLAGS += -lpthread
TEST_GEN_PROGS := seccomp_bpf seccomp_benchmark
--
2.34.1
From: Hangyu Hua <[email protected]>
[ Upstream commit 143de8d97d79316590475dc2a84513c63c863ddf ]
msg_data_sz return a 32bit value, but size is 16bit. This may lead to a
bit overflow.
Signed-off-by: Hangyu Hua <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/tipc/crypto.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/tipc/crypto.c b/net/tipc/crypto.c
index d8a2f424786fc..6f91b9a306dc3 100644
--- a/net/tipc/crypto.c
+++ b/net/tipc/crypto.c
@@ -2280,7 +2280,7 @@ static bool tipc_crypto_key_rcv(struct tipc_crypto *rx, struct tipc_msg *hdr)
struct tipc_crypto *tx = tipc_net(rx->net)->crypto_tx;
struct tipc_aead_key *skey = NULL;
u16 key_gen = msg_key_gen(hdr);
- u16 size = msg_data_sz(hdr);
+ u32 size = msg_data_sz(hdr);
u8 *data = msg_data(hdr);
unsigned int keylen;
--
2.34.1
From: José Expósito <[email protected]>
[ Upstream commit 37ef4c19b4c659926ce65a7ac709ceaefb211c40 ]
Buttonpads are expected to map the INPUT_PROP_BUTTONPAD property bit
and the BTN_LEFT key bit.
As explained in the specification, where a device has a button type
value of 0 (click-pad) or 1 (pressure-pad) there should not be
discrete buttons:
https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/touchpad-windows-precision-touchpad-collection#device-capabilities-feature-report
However, some drivers map the BTN_RIGHT and/or BTN_MIDDLE key bits even
though the device is a buttonpad and therefore does not have those
buttons.
This behavior has forced userspace applications like libinput to
implement different workarounds and quirks to detect buttonpads and
offer to the user the right set of features and configuration options.
For more information:
https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/726
In order to avoid this issue clear the BTN_RIGHT and BTN_MIDDLE key
bits when the input device is register if the INPUT_PROP_BUTTONPAD
property bit is set.
Notice that this change will not affect udev because it does not check
for buttons. See systemd/src/udev/udev-builtin-input_id.c.
List of known affected hardware:
- Chuwi AeroBook Plus
- Chuwi Gemibook
- Framework Laptop
- GPD Win Max
- Huawei MateBook 2020
- Prestigio Smartbook 141 C2
- Purism Librem 14v1
- StarLite Mk II - AMI firmware
- StarLite Mk II - Coreboot firmware
- StarLite Mk III - AMI firmware
- StarLite Mk III - Coreboot firmware
- StarLabTop Mk IV - AMI firmware
- StarLabTop Mk IV - Coreboot firmware
- StarBook Mk V
Acked-by: Peter Hutterer <[email protected]>
Acked-by: Benjamin Tissoires <[email protected]>
Acked-by: Jiri Kosina <[email protected]>
Signed-off-by: José Expósito <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/input/input.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 3cfd2c18eebd9..ff9dc37eff345 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -2179,6 +2179,12 @@ int input_register_device(struct input_dev *dev)
/* KEY_RESERVED is not supposed to be transmitted to userspace. */
__clear_bit(KEY_RESERVED, dev->keybit);
+ /* Buttonpads should not map BTN_RIGHT and/or BTN_MIDDLE. */
+ if (test_bit(INPUT_PROP_BUTTONPAD, dev->propbit)) {
+ __clear_bit(BTN_RIGHT, dev->keybit);
+ __clear_bit(BTN_MIDDLE, dev->keybit);
+ }
+
/* Make sure that bitmasks not mentioned in dev->evbit are clean. */
input_cleanse_bitmasks(dev);
--
2.34.1
From: Yongzhi Liu <[email protected]>
[ Upstream commit 455896c53d5b803733ddd84e1bf8a430644439b6 ]
pm_runtime_get_() increments the runtime PM usage counter even
when it returns an error code, thus a matching decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Yongzhi Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/dma/sh/shdma-base.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/dma/sh/shdma-base.c b/drivers/dma/sh/shdma-base.c
index 7f72b3f4cd1ae..19ac95c0098f0 100644
--- a/drivers/dma/sh/shdma-base.c
+++ b/drivers/dma/sh/shdma-base.c
@@ -115,8 +115,10 @@ static dma_cookie_t shdma_tx_submit(struct dma_async_tx_descriptor *tx)
ret = pm_runtime_get(schan->dev);
spin_unlock_irq(&schan->chan_lock);
- if (ret < 0)
+ if (ret < 0) {
dev_err(schan->dev, "%s(): GET = %d\n", __func__, ret);
+ pm_runtime_put(schan->dev);
+ }
pm_runtime_barrier(schan->dev);
--
2.34.1
From: Kai Vehmanen <[email protected]>
[ Upstream commit a6d78661dc903d90a327892bbc34268f3a5f4b9c ]
The current rt5668_jack_detect_handler() assumes the component
and card will always show up and implements an infinite usleep
loop waiting for them to show up.
This does not hold true if a codec interrupt (or other
event) occurs when the card is unbound. The codec driver's
remove or shutdown functions cannot cancel the workqueue due
to the wait loop. As a result, code can either end up blocking
the workqueue, or hit a kernel oops when the card is freed.
Fix the issue by rescheduling the jack detect handler in
case the card is not ready. In case card never shows up,
the shutdown/remove/suspend calls can now cancel the detect
task.
Signed-off-by: Kai Vehmanen <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Shuming Fan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/rt5668.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/rt5668.c b/sound/soc/codecs/rt5668.c
index bc69adc9c8b70..e625df57c69e5 100644
--- a/sound/soc/codecs/rt5668.c
+++ b/sound/soc/codecs/rt5668.c
@@ -1022,11 +1022,13 @@ static void rt5668_jack_detect_handler(struct work_struct *work)
container_of(work, struct rt5668_priv, jack_detect_work.work);
int val, btn_type;
- while (!rt5668->component)
- usleep_range(10000, 15000);
-
- while (!rt5668->component->card->instantiated)
- usleep_range(10000, 15000);
+ if (!rt5668->component || !rt5668->component->card ||
+ !rt5668->component->card->instantiated) {
+ /* card not yet ready, try later */
+ mod_delayed_work(system_power_efficient_wq,
+ &rt5668->jack_detect_work, msecs_to_jiffies(15));
+ return;
+ }
mutex_lock(&rt5668->calibrate_mutex);
--
2.34.1
From: Lennert Buytenhek <[email protected]>
commit 5ce97f4ec5e0f8726a5dda1710727b1ee9badcac upstream.
The AMD IOMMU logs I/O page faults and such to a ring buffer in
system memory, and this ring buffer can overflow. The AMD IOMMU
spec has the following to say about the interrupt status bit that
signals this overflow condition:
EventOverflow: Event log overflow. RW1C. Reset 0b. 1 = IOMMU
event log overflow has occurred. This bit is set when a new
event is to be written to the event log and there is no usable
entry in the event log, causing the new event information to
be discarded. An interrupt is generated when EventOverflow = 1b
and MMIO Offset 0018h[EventIntEn] = 1b. No new event log
entries are written while this bit is set. Software Note: To
resume logging, clear EventOverflow (W1C), and write a 1 to
MMIO Offset 0018h[EventLogEn].
The AMD IOMMU driver doesn't currently implement this recovery
sequence, meaning that if a ring buffer overflow occurs, logging
of EVT/PPR/GA events will cease entirely.
This patch implements the spec-mandated reset sequence, with the
minor tweak that the hardware seems to want to have a 0 written to
MMIO Offset 0018h[EventLogEn] first, before writing an 1 into this
field, or the IOMMU won't actually resume logging events.
Signed-off-by: Lennert Buytenhek <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/amd/amd_iommu.h | 1 +
drivers/iommu/amd/amd_iommu_types.h | 1 +
drivers/iommu/amd/init.c | 10 ++++++++++
drivers/iommu/amd/iommu.c | 10 ++++++++--
4 files changed, 20 insertions(+), 2 deletions(-)
--- a/drivers/iommu/amd/amd_iommu.h
+++ b/drivers/iommu/amd/amd_iommu.h
@@ -17,6 +17,7 @@ extern int amd_iommu_init_passthrough(vo
extern irqreturn_t amd_iommu_int_thread(int irq, void *data);
extern irqreturn_t amd_iommu_int_handler(int irq, void *data);
extern void amd_iommu_apply_erratum_63(u16 devid);
+extern void amd_iommu_restart_event_logging(struct amd_iommu *iommu);
extern void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu);
extern int amd_iommu_init_devices(void);
extern void amd_iommu_uninit_devices(void);
--- a/drivers/iommu/amd/amd_iommu_types.h
+++ b/drivers/iommu/amd/amd_iommu_types.h
@@ -109,6 +109,7 @@
#define PASID_MASK 0x0000ffff
/* MMIO status bits */
+#define MMIO_STATUS_EVT_OVERFLOW_INT_MASK (1 << 0)
#define MMIO_STATUS_EVT_INT_MASK (1 << 1)
#define MMIO_STATUS_COM_WAIT_INT_MASK (1 << 2)
#define MMIO_STATUS_PPR_INT_MASK (1 << 6)
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -657,6 +657,16 @@ static int __init alloc_command_buffer(s
}
/*
+ * This function restarts event logging in case the IOMMU experienced
+ * an event log buffer overflow.
+ */
+void amd_iommu_restart_event_logging(struct amd_iommu *iommu)
+{
+ iommu_feature_disable(iommu, CONTROL_EVT_LOG_EN);
+ iommu_feature_enable(iommu, CONTROL_EVT_LOG_EN);
+}
+
+/*
* This function resets the command buffer if the IOMMU stopped fetching
* commands from it.
*/
--- a/drivers/iommu/amd/iommu.c
+++ b/drivers/iommu/amd/iommu.c
@@ -813,7 +813,8 @@ amd_iommu_set_pci_msi_domain(struct devi
#endif /* !CONFIG_IRQ_REMAP */
#define AMD_IOMMU_INT_MASK \
- (MMIO_STATUS_EVT_INT_MASK | \
+ (MMIO_STATUS_EVT_OVERFLOW_INT_MASK | \
+ MMIO_STATUS_EVT_INT_MASK | \
MMIO_STATUS_PPR_INT_MASK | \
MMIO_STATUS_GALOG_INT_MASK)
@@ -823,7 +824,7 @@ irqreturn_t amd_iommu_int_thread(int irq
u32 status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET);
while (status & AMD_IOMMU_INT_MASK) {
- /* Enable EVT and PPR and GA interrupts again */
+ /* Enable interrupt sources again */
writel(AMD_IOMMU_INT_MASK,
iommu->mmio_base + MMIO_STATUS_OFFSET);
@@ -844,6 +845,11 @@ irqreturn_t amd_iommu_int_thread(int irq
}
#endif
+ if (status & MMIO_STATUS_EVT_OVERFLOW_INT_MASK) {
+ pr_info_ratelimited("IOMMU event log overflow\n");
+ amd_iommu_restart_event_logging(iommu);
+ }
+
/*
* Hardware bug: ERBT1312
* When re-enabling interrupt (by writing 1
From: Marek Marczykowski-Górecki <[email protected]>
commit dcf4ff7a48e7598e6b10126cc02177abb8ae4f3f upstream.
xennet_destroy_queues() relies on info->netdev->real_num_tx_queues to
delete queues. Since d7dac083414eb5bb99a6d2ed53dc2c1b405224e5
("net-sysfs: update the queue counts in the unregistration path"),
unregister_netdev() indirectly sets real_num_tx_queues to 0. Those two
facts together means, that xennet_destroy_queues() called from
xennet_remove() cannot do its job, because it's called after
unregister_netdev(). This results in kfree-ing queues that are still
linked in napi, which ultimately crashes:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 52 Comm: xenwatch Tainted: G W 5.16.10-1.32.fc32.qubes.x86_64+ #226
RIP: 0010:free_netdev+0xa3/0x1a0
Code: ff 48 89 df e8 2e e9 00 00 48 8b 43 50 48 8b 08 48 8d b8 a0 fe ff ff 48 8d a9 a0 fe ff ff 49 39 c4 75 26 eb 47 e8 ed c1 66 ff <48> 8b 85 60 01 00 00 48 8d 95 60 01 00 00 48 89 ef 48 2d 60 01 00
RSP: 0000:ffffc90000bcfd00 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff88800edad000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffc90000bcfc30 RDI: 00000000ffffffff
RBP: fffffffffffffea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff88800edad050
R13: ffff8880065f8f88 R14: 0000000000000000 R15: ffff8880066c6680
FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000e998c006 CR4: 00000000003706e0
Call Trace:
<TASK>
xennet_remove+0x13d/0x300 [xen_netfront]
xenbus_dev_remove+0x6d/0xf0
__device_release_driver+0x17a/0x240
device_release_driver+0x24/0x30
bus_remove_device+0xd8/0x140
device_del+0x18b/0x410
? _raw_spin_unlock+0x16/0x30
? klist_iter_exit+0x14/0x20
? xenbus_dev_request_and_reply+0x80/0x80
device_unregister+0x13/0x60
xenbus_dev_changed+0x18e/0x1f0
xenwatch_thread+0xc0/0x1a0
? do_wait_intr_irq+0xa0/0xa0
kthread+0x16b/0x190
? set_kthread_struct+0x40/0x40
ret_from_fork+0x22/0x30
</TASK>
Fix this by calling xennet_destroy_queues() from xennet_uninit(),
when real_num_tx_queues is still available. This ensures that queues are
destroyed when real_num_tx_queues is set to 0, regardless of how
unregister_netdev() was called.
Originally reported at
https://github.com/QubesOS/qubes-issues/issues/7257
Fixes: d7dac083414eb5bb9 ("net-sysfs: update the queue counts in the unregistration path")
Cc: [email protected]
Signed-off-by: Marek Marczykowski-Górecki <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/xen-netfront.c | 39 +++++++++++++++++++++++----------------
1 file changed, 23 insertions(+), 16 deletions(-)
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -844,6 +844,28 @@ static int xennet_close(struct net_devic
return 0;
}
+static void xennet_destroy_queues(struct netfront_info *info)
+{
+ unsigned int i;
+
+ for (i = 0; i < info->netdev->real_num_tx_queues; i++) {
+ struct netfront_queue *queue = &info->queues[i];
+
+ if (netif_running(info->netdev))
+ napi_disable(&queue->napi);
+ netif_napi_del(&queue->napi);
+ }
+
+ kfree(info->queues);
+ info->queues = NULL;
+}
+
+static void xennet_uninit(struct net_device *dev)
+{
+ struct netfront_info *np = netdev_priv(dev);
+ xennet_destroy_queues(np);
+}
+
static void xennet_set_rx_rsp_cons(struct netfront_queue *queue, RING_IDX val)
{
unsigned long flags;
@@ -1613,6 +1635,7 @@ static int xennet_xdp(struct net_device
}
static const struct net_device_ops xennet_netdev_ops = {
+ .ndo_uninit = xennet_uninit,
.ndo_open = xennet_open,
.ndo_stop = xennet_close,
.ndo_start_xmit = xennet_start_xmit,
@@ -2105,22 +2128,6 @@ error:
return err;
}
-static void xennet_destroy_queues(struct netfront_info *info)
-{
- unsigned int i;
-
- for (i = 0; i < info->netdev->real_num_tx_queues; i++) {
- struct netfront_queue *queue = &info->queues[i];
-
- if (netif_running(info->netdev))
- napi_disable(&queue->napi);
- netif_napi_del(&queue->napi);
- }
-
- kfree(info->queues);
- info->queues = NULL;
-}
-
static int xennet_create_page_pool(struct netfront_queue *queue)
From: Nicolas Cavallari <[email protected]>
commit 5838a14832d447990827d85e90afe17e6fb9c175 upstream.
Do not call get_trip_hyst() from thermal_genl_cmd_tz_get_trip() if
the thermal zone does not define one.
Fixes: 1ce50e7d408e ("thermal: core: genetlink support for events/cmd/sampling")
Signed-off-by: Nicolas Cavallari <[email protected]>
Cc: 5.10+ <[email protected]> # 5.10+
Signed-off-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/thermal/thermal_netlink.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/thermal/thermal_netlink.c
+++ b/drivers/thermal/thermal_netlink.c
@@ -418,11 +418,12 @@ static int thermal_genl_cmd_tz_get_trip(
for (i = 0; i < tz->trips; i++) {
enum thermal_trip_type type;
- int temp, hyst;
+ int temp, hyst = 0;
tz->ops->get_trip_type(tz, i, &type);
tz->ops->get_trip_temp(tz, i, &temp);
- tz->ops->get_trip_hyst(tz, i, &hyst);
+ if (tz->ops->get_trip_hyst)
+ tz->ops->get_trip_hyst(tz, i, &hyst);
if (nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TRIP_ID, i) ||
nla_put_u32(msg, THERMAL_GENL_ATTR_TZ_TRIP_TYPE, type) ||
From: Dave Jiang <[email protected]>
commit d5081bf5dcfb1cb83fb538708b0ac07a10a79cc4 upstream.
The field offset for port configuration status on SPR has been changed to
bit 14 from ICX where it resides at bit 12. By chance link status detection
continued to work on SPR. This is due to bit 12 being a configuration bit
which is in sync with the status bit. Fix this by checking for a SPR device
and checking correct status bit.
Fixes: 26bfe3d0b227 ("ntb: intel: Add Icelake (gen4) support for Intel NTB")
Tested-by: Jerry Dai <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Signed-off-by: Jon Mason <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ntb/hw/intel/ntb_hw_gen4.c | 17 ++++++++++++++++-
drivers/ntb/hw/intel/ntb_hw_gen4.h | 16 ++++++++++++++++
2 files changed, 32 insertions(+), 1 deletion(-)
--- a/drivers/ntb/hw/intel/ntb_hw_gen4.c
+++ b/drivers/ntb/hw/intel/ntb_hw_gen4.c
@@ -168,6 +168,18 @@ static enum ntb_topo gen4_ppd_topo(struc
return NTB_TOPO_NONE;
}
+static enum ntb_topo spr_ppd_topo(struct intel_ntb_dev *ndev, u32 ppd)
+{
+ switch (ppd & SPR_PPD_TOPO_MASK) {
+ case SPR_PPD_TOPO_B2B_USD:
+ return NTB_TOPO_B2B_USD;
+ case SPR_PPD_TOPO_B2B_DSD:
+ return NTB_TOPO_B2B_DSD;
+ }
+
+ return NTB_TOPO_NONE;
+}
+
int gen4_init_dev(struct intel_ntb_dev *ndev)
{
struct pci_dev *pdev = ndev->ntb.pdev;
@@ -181,7 +193,10 @@ int gen4_init_dev(struct intel_ntb_dev *
ndev->hwerr_flags |= NTB_HWERR_BAR_ALIGN;
ppd1 = ioread32(ndev->self_mmio + GEN4_PPD1_OFFSET);
- ndev->ntb.topo = gen4_ppd_topo(ndev, ppd1);
+ if (pdev_is_ICX(pdev))
+ ndev->ntb.topo = gen4_ppd_topo(ndev, ppd1);
+ else if (pdev_is_SPR(pdev))
+ ndev->ntb.topo = spr_ppd_topo(ndev, ppd1);
dev_dbg(&pdev->dev, "ppd %#x topo %s\n", ppd1,
ntb_topo_string(ndev->ntb.topo));
if (ndev->ntb.topo == NTB_TOPO_NONE)
--- a/drivers/ntb/hw/intel/ntb_hw_gen4.h
+++ b/drivers/ntb/hw/intel/ntb_hw_gen4.h
@@ -46,10 +46,14 @@
#define GEN4_PPD_CLEAR_TRN 0x0001
#define GEN4_PPD_LINKTRN 0x0008
#define GEN4_PPD_CONN_MASK 0x0300
+#define SPR_PPD_CONN_MASK 0x0700
#define GEN4_PPD_CONN_B2B 0x0200
#define GEN4_PPD_DEV_MASK 0x1000
#define GEN4_PPD_DEV_DSD 0x1000
#define GEN4_PPD_DEV_USD 0x0000
+#define SPR_PPD_DEV_MASK 0x4000
+#define SPR_PPD_DEV_DSD 0x4000
+#define SPR_PPD_DEV_USD 0x0000
#define GEN4_LINK_CTRL_LINK_DISABLE 0x0010
#define GEN4_SLOTSTS 0xb05a
@@ -59,6 +63,10 @@
#define GEN4_PPD_TOPO_B2B_USD (GEN4_PPD_CONN_B2B | GEN4_PPD_DEV_USD)
#define GEN4_PPD_TOPO_B2B_DSD (GEN4_PPD_CONN_B2B | GEN4_PPD_DEV_DSD)
+#define SPR_PPD_TOPO_MASK (SPR_PPD_CONN_MASK | SPR_PPD_DEV_MASK)
+#define SPR_PPD_TOPO_B2B_USD (GEN4_PPD_CONN_B2B | SPR_PPD_DEV_USD)
+#define SPR_PPD_TOPO_B2B_DSD (GEN4_PPD_CONN_B2B | SPR_PPD_DEV_DSD)
+
#define GEN4_DB_COUNT 32
#define GEN4_DB_LINK 32
#define GEN4_DB_LINK_BIT BIT_ULL(GEN4_DB_LINK)
@@ -96,5 +104,13 @@ static inline int pdev_is_ICX(struct pci
return 1;
return 0;
}
+
+static inline int pdev_is_SPR(struct pci_dev *pdev)
+{
+ if (pdev_is_gen4(pdev) &&
+ pdev->revision > PCI_DEVICE_REVISION_ICX_MAX)
+ return 1;
+ return 0;
+}
#endif
From: Jiri Bohac <[email protected]>
commit 6596a0229541270fb8d38d989f91b78838e5e9da upstream.
Commit 749439bfac6e1a2932c582e2699f91d329658196 ("ipv6: fix udpv6
sendmsg crash caused by too small MTU") breaks PMTU for xfrm.
A Packet Too Big ICMPv6 message received in response to an ESP
packet will prevent all further communication through the tunnel
if the reported MTU minus the ESP overhead is smaller than 1280.
E.g. in a case of a tunnel-mode ESP with sha256/aes the overhead
is 92 bytes. Receiving a PTB with MTU of 1371 or less will result
in all further packets in the tunnel dropped. A ping through the
tunnel fails with "ping: sendmsg: Invalid argument".
Apparently the MTU on the xfrm route is smaller than 1280 and
fails the check inside ip6_setup_cork() added by 749439bf.
We found this by debugging USGv6/ipv6ready failures. Failing
tests are: "Phase-2 Interoperability Test Scenario IPsec" /
5.3.11 and 5.4.11 (Tunnel Mode: Fragmentation).
Commit b515d2637276a3810d6595e10ab02c13bfd0b63a ("xfrm:
xfrm_state_mtu should return at least 1280 for ipv6") attempted
to fix this but caused another regression in TCP MSS calculations
and had to be reverted.
The patch below fixes the situation by dropping the MTU
check and instead checking for the underflows described in the
749439bf commit message.
Signed-off-by: Jiri Bohac <[email protected]>
Fixes: 749439bfac6e ("ipv6: fix udpv6 sendmsg crash caused by too small MTU")
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_output.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -1432,8 +1432,6 @@ static int ip6_setup_cork(struct sock *s
if (np->frag_size)
mtu = np->frag_size;
}
- if (mtu < IPV6_MIN_MTU)
- return -EINVAL;
cork->base.fragsize = mtu;
cork->base.gso_size = ipc6->gso_size;
cork->base.tx_flags = 0;
@@ -1495,8 +1493,6 @@ static int __ip6_append_data(struct sock
fragheaderlen = sizeof(struct ipv6hdr) + rt->rt6i_nfheader_len +
(opt ? opt->opt_nflen : 0);
- maxfraglen = ((mtu - fragheaderlen) & ~7) + fragheaderlen -
- sizeof(struct frag_hdr);
headersize = sizeof(struct ipv6hdr) +
(opt ? opt->opt_flen + opt->opt_nflen : 0) +
@@ -1504,6 +1500,13 @@ static int __ip6_append_data(struct sock
sizeof(struct frag_hdr) : 0) +
rt->rt6i_nfheader_len;
+ if (mtu < fragheaderlen ||
+ ((mtu - fragheaderlen) & ~7) + fragheaderlen < sizeof(struct frag_hdr))
+ goto emsgsize;
+
+ maxfraglen = ((mtu - fragheaderlen) & ~7) + fragheaderlen -
+ sizeof(struct frag_hdr);
+
/* as per RFC 7112 section 5, the entire IPv6 Header Chain must fit
* the first fragment
*/
From: Eric Dumazet <[email protected]>
commit 56763f12b0f02706576a088e85ef856deacc98a0 upstream.
We must not dereference @new_hooks after nf_hook_mutex has been released,
because other threads might have freed our allocated hooks already.
BUG: KASAN: use-after-free in nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline]
BUG: KASAN: use-after-free in hooks_validate net/netfilter/core.c:171 [inline]
BUG: KASAN: use-after-free in __nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438
Read of size 2 at addr ffff88801c1a8000 by task syz-executor237/4430
CPU: 1 PID: 4430 Comm: syz-executor237 Not tainted 5.17.0-rc5-syzkaller-00306-g2293be58d6a1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255
__kasan_report mm/kasan/report.c:442 [inline]
kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
nf_hook_entries_get_hook_ops include/linux/netfilter.h:130 [inline]
hooks_validate net/netfilter/core.c:171 [inline]
__nf_register_net_hook+0x77a/0x820 net/netfilter/core.c:438
nf_register_net_hook+0x114/0x170 net/netfilter/core.c:571
nf_register_net_hooks+0x59/0xc0 net/netfilter/core.c:587
nf_synproxy_ipv6_init+0x85/0xe0 net/netfilter/nf_synproxy_core.c:1218
synproxy_tg6_check+0x30d/0x560 net/ipv6/netfilter/ip6t_SYNPROXY.c:81
xt_check_target+0x26c/0x9e0 net/netfilter/x_tables.c:1038
check_target net/ipv6/netfilter/ip6_tables.c:530 [inline]
find_check_entry.constprop.0+0x7f1/0x9e0 net/ipv6/netfilter/ip6_tables.c:573
translate_table+0xc8b/0x1750 net/ipv6/netfilter/ip6_tables.c:735
do_replace net/ipv6/netfilter/ip6_tables.c:1153 [inline]
do_ip6t_set_ctl+0x56e/0xb90 net/ipv6/netfilter/ip6_tables.c:1639
nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101
ipv6_setsockopt+0x122/0x180 net/ipv6/ipv6_sockglue.c:1024
rawv6_setsockopt+0xd3/0x6a0 net/ipv6/raw.c:1084
__sys_setsockopt+0x2db/0x610 net/socket.c:2180
__do_sys_setsockopt net/socket.c:2191 [inline]
__se_sys_setsockopt net/socket.c:2188 [inline]
__x64_sys_setsockopt+0xba/0x150 net/socket.c:2188
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f65a1ace7d9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 71 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f65a1a7f308 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f65a1ace7d9
RDX: 0000000000000040 RSI: 0000000000000029 RDI: 0000000000000003
RBP: 00007f65a1b574c8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000020000000 R11: 0000000000000246 R12: 00007f65a1b55130
R13: 00007f65a1b574c0 R14: 00007f65a1b24090 R15: 0000000000022000
</TASK>
The buggy address belongs to the page:
page:ffffea0000706a00 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1c1a8
flags: 0xfff00000000000(node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000000000 ffffea0001c1b108 ffffea000046dd08 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as freed
page last allocated via order 2, migratetype Unmovable, gfp_mask 0x52dc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_ZERO), pid 4430, ts 1061781545818, free_ts 1061791488993
prep_new_page mm/page_alloc.c:2434 [inline]
get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165
__alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389
__alloc_pages_node include/linux/gfp.h:572 [inline]
alloc_pages_node include/linux/gfp.h:595 [inline]
kmalloc_large_node+0x62/0x130 mm/slub.c:4438
__kmalloc_node+0x35a/0x4a0 mm/slub.c:4454
kmalloc_node include/linux/slab.h:604 [inline]
kvmalloc_node+0x97/0x100 mm/util.c:580
kvmalloc include/linux/slab.h:731 [inline]
kvzalloc include/linux/slab.h:739 [inline]
allocate_hook_entries_size net/netfilter/core.c:61 [inline]
nf_hook_entries_grow+0x140/0x780 net/netfilter/core.c:128
__nf_register_net_hook+0x144/0x820 net/netfilter/core.c:429
nf_register_net_hook+0x114/0x170 net/netfilter/core.c:571
nf_register_net_hooks+0x59/0xc0 net/netfilter/core.c:587
nf_synproxy_ipv6_init+0x85/0xe0 net/netfilter/nf_synproxy_core.c:1218
synproxy_tg6_check+0x30d/0x560 net/ipv6/netfilter/ip6t_SYNPROXY.c:81
xt_check_target+0x26c/0x9e0 net/netfilter/x_tables.c:1038
check_target net/ipv6/netfilter/ip6_tables.c:530 [inline]
find_check_entry.constprop.0+0x7f1/0x9e0 net/ipv6/netfilter/ip6_tables.c:573
translate_table+0xc8b/0x1750 net/ipv6/netfilter/ip6_tables.c:735
do_replace net/ipv6/netfilter/ip6_tables.c:1153 [inline]
do_ip6t_set_ctl+0x56e/0xb90 net/ipv6/netfilter/ip6_tables.c:1639
nf_setsockopt+0x83/0xe0 net/netfilter/nf_sockopt.c:101
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1352 [inline]
free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1404
free_unref_page_prepare mm/page_alloc.c:3325 [inline]
free_unref_page+0x19/0x690 mm/page_alloc.c:3404
kvfree+0x42/0x50 mm/util.c:613
rcu_do_batch kernel/rcu/tree.c:2527 [inline]
rcu_core+0x7b1/0x1820 kernel/rcu/tree.c:2778
__do_softirq+0x29b/0x9c2 kernel/softirq.c:558
Memory state around the buggy address:
ffff88801c1a7f00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88801c1a7f80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff88801c1a8000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff88801c1a8080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff88801c1a8100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Fixes: 2420b79f8c18 ("netfilter: debug: check for sorted array")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Acked-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netfilter/core.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/net/netfilter/core.c
+++ b/net/netfilter/core.c
@@ -406,14 +406,15 @@ static int __nf_register_net_hook(struct
p = nf_entry_dereference(*pp);
new_hooks = nf_hook_entries_grow(p, reg);
- if (!IS_ERR(new_hooks))
+ if (!IS_ERR(new_hooks)) {
+ hooks_validate(new_hooks);
rcu_assign_pointer(*pp, new_hooks);
+ }
mutex_unlock(&nf_hook_mutex);
if (IS_ERR(new_hooks))
return PTR_ERR(new_hooks);
- hooks_validate(new_hooks);
#ifdef CONFIG_NETFILTER_INGRESS
if (nf_ingress_hook(reg, pf))
net_inc_ingress_queue();
From: Florian Westphal <[email protected]>
commit 747670fd9a2d1b7774030dba65ca022ba442ce71 upstream.
There is no guarantee that state->sk refers to a full socket.
If refcount transitions to 0, sock_put calls sk_free which then ends up
with garbage fields.
I'd like to thank Oleksandr Natalenko and Jiri Benc for considerable
debug work and pointing out state->sk oddities.
Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener")
Tested-by: Oleksandr Natalenko <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netfilter/nf_queue.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
--- a/net/netfilter/nf_queue.c
+++ b/net/netfilter/nf_queue.c
@@ -46,6 +46,15 @@ void nf_unregister_queue_handler(struct
}
EXPORT_SYMBOL(nf_unregister_queue_handler);
+static void nf_queue_sock_put(struct sock *sk)
+{
+#ifdef CONFIG_INET
+ sock_gen_put(sk);
+#else
+ sock_put(sk);
+#endif
+}
+
static void nf_queue_entry_release_refs(struct nf_queue_entry *entry)
{
struct nf_hook_state *state = &entry->state;
@@ -56,7 +65,7 @@ static void nf_queue_entry_release_refs(
if (state->out)
dev_put(state->out);
if (state->sk)
- sock_put(state->sk);
+ nf_queue_sock_put(state->sk);
#if IS_ENABLED(CONFIG_BRIDGE_NETFILTER)
if (entry->physin)
From: Daniel Borkmann <[email protected]>
commit 0708a0afe291bdfe1386d74d5ec1f0c27e8b9168 upstream.
syzkaller was recently triggering an oversized kvmalloc() warning via
xdp_umem_create().
The triggered warning was added back in 7661809d493b ("mm: don't allow
oversized kvmalloc() calls"). The rationale for the warning for huge
kvmalloc sizes was as a reaction to a security bug where the size was
more than UINT_MAX but not everything was prepared to handle unsigned
long sizes.
Anyway, the AF_XDP related call trace from this syzkaller report was:
kvmalloc include/linux/mm.h:806 [inline]
kvmalloc_array include/linux/mm.h:824 [inline]
kvcalloc include/linux/mm.h:829 [inline]
xdp_umem_pin_pages net/xdp/xdp_umem.c:102 [inline]
xdp_umem_reg net/xdp/xdp_umem.c:219 [inline]
xdp_umem_create+0x6a5/0xf00 net/xdp/xdp_umem.c:252
xsk_setsockopt+0x604/0x790 net/xdp/xsk.c:1068
__sys_setsockopt+0x1fd/0x4e0 net/socket.c:2176
__do_sys_setsockopt net/socket.c:2187 [inline]
__se_sys_setsockopt net/socket.c:2184 [inline]
__x64_sys_setsockopt+0xb5/0x150 net/socket.c:2184
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Björn mentioned that requests for >2GB allocation can still be valid:
The structure that is being allocated is the page-pinning accounting.
AF_XDP has an internal limit of U32_MAX pages, which is *a lot*, but
still fewer than what memcg allows (PAGE_COUNTER_MAX is a LONG_MAX/
PAGE_SIZE on 64 bit systems). [...]
I could just change from U32_MAX to INT_MAX, but as I stated earlier
that has a hacky feeling to it. [...] From my perspective, the code
isn't broken, with the memcg limits in consideration. [...]
Linus says:
[...] Pretty much every time this has come up, the kernel warning has
shown that yes, the code was broken and there really wasn't a reason
for doing allocations that big.
Of course, some people would be perfectly fine with the allocation
failing, they just don't want the warning. I didn't want __GFP_NOWARN
to shut it up originally because I wanted people to see all those
cases, but these days I think we can just say "yeah, people can shut
it up explicitly by saying 'go ahead and fail this allocation, don't
warn about it'".
So enough time has passed that by now I'd certainly be ok with [it].
Thus allow call-sites to silence such userspace triggered splats if the
allocation requests have __GFP_NOWARN. For xdp_umem_pin_pages()'s call
to kvcalloc() this is already the case, so nothing else needed there.
Fixes: 7661809d493b ("mm: don't allow oversized kvmalloc() calls")
Reported-by: [email protected]
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: [email protected]
Cc: Björn Töpel <[email protected]>
Cc: Magnus Karlsson <[email protected]>
Cc: Willy Tarreau <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: David S. Miller <[email protected]>
Link: https://lore.kernel.org/bpf/CAJ+HfNhyfsT5cS_U9EC213ducHs9k9zNxX9+abqC0kTrPbQ0gg@mail.gmail.com
Link: https://lore.kernel.org/bpf/[email protected]
Reviewed-by: Leon Romanovsky <[email protected]>
Ackd-by: Michal Hocko <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/util.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/mm/util.c
+++ b/mm/util.c
@@ -582,8 +582,10 @@ void *kvmalloc_node(size_t size, gfp_t f
return ret;
/* Don't even allow crazy sizes */
- if (WARN_ON_ONCE(size > INT_MAX))
+ if (unlikely(size > INT_MAX)) {
+ WARN_ON_ONCE(!(flags & __GFP_NOWARN));
return NULL;
+ }
return __vmalloc_node(size, 1, flags, node,
__builtin_return_address(0));
From: Sergey Shtylyov <[email protected]>
[ Upstream commit 5f6b0f2d037c8864f20ff15311c695f65eb09db5 ]
The f_CNT register (at the PCI config. address 0x78) is 16-bit, not
8-bit! The bug was there from the very start... :-(
Signed-off-by: Sergey Shtylyov <[email protected]>
Fixes: 669a5db411d8 ("[libata] Add a bunch of PATA drivers.")
Cc: [email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ata/pata_hpt37x.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 499a947d56ddb..fef46de2f6b23 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -962,14 +962,14 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
if ((freq >> 12) != 0xABCDE) {
int i;
- u8 sr;
+ u16 sr;
u32 total = 0;
pr_warn("BIOS has not set timing clocks\n");
/* This is the process the HPT371 BIOS is reported to use */
for (i = 0; i < 128; i++) {
- pci_read_config_byte(dev, 0x78, &sr);
+ pci_read_config_word(dev, 0x78, &sr);
total += sr & 0x1FF;
udelay(15);
}
--
2.34.1
From: Frederic Weisbecker <[email protected]>
commit b2fcf2102049f6e56981e0ab3d9b633b8e2741da upstream.
This sequence of events can lead to a failure to requeue a CPU's
->nocb_timer:
1. There are no callbacks queued for any CPU covered by CPU 0-2's
->nocb_gp_kthread. Note that ->nocb_gp_kthread is associated
with CPU 0.
2. CPU 1 enqueues its first callback with interrupts disabled, and
thus must defer awakening its ->nocb_gp_kthread. It therefore
queues its rcu_data structure's ->nocb_timer. At this point,
CPU 1's rdp->nocb_defer_wakeup is RCU_NOCB_WAKE.
3. CPU 2, which shares the same ->nocb_gp_kthread, also enqueues a
callback, but with interrupts enabled, allowing it to directly
awaken the ->nocb_gp_kthread.
4. The newly awakened ->nocb_gp_kthread associates both CPU 1's
and CPU 2's callbacks with a future grace period and arranges
for that grace period to be started.
5. This ->nocb_gp_kthread goes to sleep waiting for the end of this
future grace period.
6. This grace period elapses before the CPU 1's timer fires.
This is normally improbably given that the timer is set for only
one jiffy, but timers can be delayed. Besides, it is possible
that kernel was built with CONFIG_RCU_STRICT_GRACE_PERIOD=y.
7. The grace period ends, so rcu_gp_kthread awakens the
->nocb_gp_kthread, which in turn awakens both CPU 1's and
CPU 2's ->nocb_cb_kthread. Then ->nocb_gb_kthread sleeps
waiting for more newly queued callbacks.
8. CPU 1's ->nocb_cb_kthread invokes its callback, then sleeps
waiting for more invocable callbacks.
9. Note that neither kthread updated any ->nocb_timer state,
so CPU 1's ->nocb_defer_wakeup is still set to RCU_NOCB_WAKE.
10. CPU 1 enqueues its second callback, this time with interrupts
enabled so it can wake directly ->nocb_gp_kthread.
It does so with calling wake_nocb_gp() which also cancels the
pending timer that got queued in step 2. But that doesn't reset
CPU 1's ->nocb_defer_wakeup which is still set to RCU_NOCB_WAKE.
So CPU 1's ->nocb_defer_wakeup and its ->nocb_timer are now
desynchronized.
11. ->nocb_gp_kthread associates the callback queued in 10 with a new
grace period, arranges for that grace period to start and sleeps
waiting for it to complete.
12. The grace period ends, rcu_gp_kthread awakens ->nocb_gp_kthread,
which in turn wakes up CPU 1's ->nocb_cb_kthread which then
invokes the callback queued in 10.
13. CPU 1 enqueues its third callback, this time with interrupts
disabled so it must queue a timer for a deferred wakeup. However
the value of its ->nocb_defer_wakeup is RCU_NOCB_WAKE which
incorrectly indicates that a timer is already queued. Instead,
CPU 1's ->nocb_timer was cancelled in 10. CPU 1 therefore fails
to queue the ->nocb_timer.
14. CPU 1 has its pending callback and it may go unnoticed until
some other CPU ever wakes up ->nocb_gp_kthread or CPU 1 ever
calls an explicit deferred wakeup, for example, during idle entry.
This commit fixes this bug by resetting rdp->nocb_defer_wakeup everytime
we delete the ->nocb_timer.
It is quite possible that there is a similar scenario involving
->nocb_bypass_timer and ->nocb_defer_wakeup. However, despite some
effort from several people, a failure scenario has not yet been located.
However, that by no means guarantees that no such scenario exists.
Finding a failure scenario is left as an exercise for the reader, and the
"Fixes:" tag below relates to ->nocb_bypass_timer instead of ->nocb_timer.
Fixes: d1b222c6be1f (rcu/nocb: Add bypass callback queueing)
Cc: <[email protected]>
Cc: Josh Triplett <[email protected]>
Cc: Lai Jiangshan <[email protected]>
Cc: Joel Fernandes <[email protected]>
Cc: Boqun Feng <[email protected]>
Reviewed-by: Neeraj Upadhyay <[email protected]>
Signed-off-by: Frederic Weisbecker <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Signed-off-by: Zhen Lei <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/rcu/tree_plugin.h | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/kernel/rcu/tree_plugin.h
+++ b/kernel/rcu/tree_plugin.h
@@ -1646,7 +1646,11 @@ static void wake_nocb_gp(struct rcu_data
rcu_nocb_unlock_irqrestore(rdp, flags);
return;
}
- del_timer(&rdp->nocb_timer);
+
+ if (READ_ONCE(rdp->nocb_defer_wakeup) > RCU_NOCB_WAKE_NOT) {
+ WRITE_ONCE(rdp->nocb_defer_wakeup, RCU_NOCB_WAKE_NOT);
+ del_timer(&rdp->nocb_timer);
+ }
rcu_nocb_unlock_irqrestore(rdp, flags);
raw_spin_lock_irqsave(&rdp_gp->nocb_gp_lock, flags);
if (force || READ_ONCE(rdp_gp->nocb_gp_sleep)) {
@@ -2164,7 +2168,6 @@ static void do_nocb_deferred_wakeup_comm
return;
}
ndw = READ_ONCE(rdp->nocb_defer_wakeup);
- WRITE_ONCE(rdp->nocb_defer_wakeup, RCU_NOCB_WAKE_NOT);
wake_nocb_gp(rdp, ndw == RCU_NOCB_WAKE_FORCE, flags);
trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("DeferredWake"));
}
From: Vladimir Oltean <[email protected]>
commit 91b0383fef06f20b847fa9e4f0e3054ead0b1a1b upstream.
If I'm not mistaken (and I don't think I am), the way in which the
dcbnl_ops work is that drivers call dcb_ieee_setapp() and this populates
the application table with dynamically allocated struct dcb_app_type
entries that are kept in the module-global dcb_app_list.
However, nobody keeps exact track of these entries, and although
dcb_ieee_delapp() is supposed to remove them, nobody does so when the
interface goes away (example: driver unbinds from device). So the
dcb_app_list will contain lingering entries with an ifindex that no
longer matches any device in dcb_app_lookup().
Reclaim the lost memory by listening for the NETDEV_UNREGISTER event and
flushing the app table entries of interfaces that are now gone.
In fact something like this used to be done as part of the initial
commit (blamed below), but it was done in dcbnl_exit() -> dcb_flushapp(),
essentially at module_exit time. That became dead code after commit
7a6b6f515f77 ("DCB: fix kconfig option") which essentially merged
"tristate config DCB" and "bool config DCBNL" into a single "bool config
DCB", so net/dcb/dcbnl.c could not be built as a module anymore.
Commit 36b9ad8084bd ("net/dcb: make dcbnl.c explicitly non-modular")
recognized this and deleted dcbnl_exit() and dcb_flushapp() altogether,
leaving us with the version we have today.
Since flushing application table entries can and should be done as soon
as the netdevice disappears, fundamentally the commit that is to blame
is the one that introduced the design of this API.
Fixes: 9ab933ab2cc8 ("dcbnl: add appliction tlv handlers")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/dcb/dcbnl.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
--- a/net/dcb/dcbnl.c
+++ b/net/dcb/dcbnl.c
@@ -2063,10 +2063,54 @@ u8 dcb_ieee_getapp_default_prio_mask(con
}
EXPORT_SYMBOL(dcb_ieee_getapp_default_prio_mask);
+static void dcbnl_flush_dev(struct net_device *dev)
+{
+ struct dcb_app_type *itr, *tmp;
+
+ spin_lock(&dcb_lock);
+
+ list_for_each_entry_safe(itr, tmp, &dcb_app_list, list) {
+ if (itr->ifindex == dev->ifindex) {
+ list_del(&itr->list);
+ kfree(itr);
+ }
+ }
+
+ spin_unlock(&dcb_lock);
+}
+
+static int dcbnl_netdevice_event(struct notifier_block *nb,
+ unsigned long event, void *ptr)
+{
+ struct net_device *dev = netdev_notifier_info_to_dev(ptr);
+
+ switch (event) {
+ case NETDEV_UNREGISTER:
+ if (!dev->dcbnl_ops)
+ return NOTIFY_DONE;
+
+ dcbnl_flush_dev(dev);
+
+ return NOTIFY_OK;
+ default:
+ return NOTIFY_DONE;
+ }
+}
+
+static struct notifier_block dcbnl_nb __read_mostly = {
+ .notifier_call = dcbnl_netdevice_event,
+};
+
static int __init dcbnl_init(void)
{
+ int err;
+
INIT_LIST_HEAD(&dcb_app_list);
+ err = register_netdevice_notifier(&dcbnl_nb);
+ if (err)
+ return err;
+
rtnl_register(PF_UNSPEC, RTM_GETDCB, dcb_doit, NULL, 0);
rtnl_register(PF_UNSPEC, RTM_SETDCB, dcb_doit, NULL, 0);
From: Steven Rostedt <[email protected]>
[ Upstream commit 77360f9bbc7e5e2ab7a2c8b4c0244fbbfcfc6f62 ]
Pingfan reported that the following causes a fault:
echo "filename ~ \"cpu\"" > events/syscalls/sys_enter_openat/filter
echo 1 > events/syscalls/sys_enter_at/enable
The reason is that trace event filter treats the user space pointer
defined by "filename" as a normal pointer to compare against the "cpu"
string. The following bug happened:
kvm-03-guest16 login: [72198.026181] BUG: unable to handle page fault for address: 00007fffaae8ef60
#PF: supervisor read access in kernel mode
#PF: error_code(0x0001) - permissions violation
PGD 80000001008b7067 P4D 80000001008b7067 PUD 2393f1067 PMD 2393ec067 PTE 8000000108f47867
Oops: 0001 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1 Comm: systemd Kdump: loaded Not tainted 5.14.0-32.el9.x86_64 #1
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:strlen+0x0/0x20
Code: 48 89 f9 74 09 48 83 c1 01 80 39 00 75 f7 31 d2 44 0f b6 04 16 44 88 04 11
48 83 c2 01 45 84 c0 75 ee c3 0f 1f 80 00 00 00 00 <80> 3f 00 74 10 48 89 f8
48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 31
RSP: 0018:ffffb5b900013e48 EFLAGS: 00010246
RAX: 0000000000000018 RBX: ffff8fc1c49ede00 RCX: 0000000000000000
RDX: 0000000000000020 RSI: ffff8fc1c02d601c RDI: 00007fffaae8ef60
RBP: 00007fffaae8ef60 R08: 0005034f4ddb8ea4 R09: 0000000000000000
R10: ffff8fc1c02d601c R11: 0000000000000000 R12: ffff8fc1c8a6e380
R13: 0000000000000000 R14: ffff8fc1c02d6010 R15: ffff8fc1c00453c0
FS: 00007fa86123db40(0000) GS:ffff8fc2ffd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fffaae8ef60 CR3: 0000000102880001 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
filter_pred_pchar+0x18/0x40
filter_match_preds+0x31/0x70
ftrace_syscall_enter+0x27a/0x2c0
syscall_trace_enter.constprop.0+0x1aa/0x1d0
do_syscall_64+0x16/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fa861d88664
The above happened because the kernel tried to access user space directly
and triggered a "supervisor read access in kernel mode" fault. Worse yet,
the memory could not even be loaded yet, and a SEGFAULT could happen as
well. This could be true for kernel space accessing as well.
To be even more robust, test both kernel and user space strings. If the
string fails to read, then simply have the filter fail.
Note, TASK_SIZE is used to determine if the pointer is user or kernel space
and the appropriate strncpy_from_kernel/user_nofault() function is used to
copy the memory. For some architectures, the compare to TASK_SIZE may always
pick user space or kernel space. If it gets it wrong, the only thing is that
the filter will fail to match. In the future, this needs to be fixed to have
the event denote which should be used. But failing a filter is much better
than panicing the machine, and that can be solved later.
Link: https://lore.kernel.org/all/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Cc: Ingo Molnar <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Tom Zanussi <[email protected]>
Reported-by: Pingfan Liu <[email protected]>
Tested-by: Pingfan Liu <[email protected]>
Fixes: 87a342f5db69d ("tracing/filters: Support filtering for char * strings")
Signed-off-by: Steven Rostedt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
Documentation/trace/events.rst | 10 +++++
kernel/trace/trace_events_filter.c | 66 ++++++++++++++++++++++++++++--
2 files changed, 73 insertions(+), 3 deletions(-)
diff --git a/Documentation/trace/events.rst b/Documentation/trace/events.rst
index 2a5aa48eff6c7..58a471b690e07 100644
--- a/Documentation/trace/events.rst
+++ b/Documentation/trace/events.rst
@@ -230,6 +230,16 @@ Currently the caret ('^') for an error always appears at the beginning of
the filter string; the error message should still be useful though
even without more accurate position info.
+5.2.1 Filter limitations
+------------------------
+
+If a filter is placed on a string pointer ``(char *)`` that does not point
+to a string on the ring buffer, but instead points to kernel or user space
+memory, then, for safety reasons, at most 1024 bytes of the content is
+copied onto a temporary buffer to do the compare. If the copy of the memory
+faults (the pointer points to memory that should not be accessed), then the
+string compare will be treated as not matching.
+
5.3 Clearing filters
--------------------
diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c
index 78a678eeb1409..7b1fb811cb0ab 100644
--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -5,6 +5,7 @@
* Copyright (C) 2009 Tom Zanussi <[email protected]>
*/
+#include <linux/uaccess.h>
#include <linux/module.h>
#include <linux/ctype.h>
#include <linux/mutex.h>
@@ -654,6 +655,47 @@ DEFINE_EQUALITY_PRED(32);
DEFINE_EQUALITY_PRED(16);
DEFINE_EQUALITY_PRED(8);
+/* user space strings temp buffer */
+#define USTRING_BUF_SIZE 1024
+
+struct ustring_buffer {
+ char buffer[USTRING_BUF_SIZE];
+};
+
+static __percpu struct ustring_buffer *ustring_per_cpu;
+
+static __always_inline char *test_string(char *str)
+{
+ struct ustring_buffer *ubuf;
+ char __user *ustr;
+ char *kstr;
+
+ if (!ustring_per_cpu)
+ return NULL;
+
+ ubuf = this_cpu_ptr(ustring_per_cpu);
+ kstr = ubuf->buffer;
+
+ /*
+ * We use TASK_SIZE to denote user or kernel space, but this will
+ * not work for all architectures. If it picks the wrong one, it may
+ * just fail the filter (but will not bug).
+ *
+ * TODO: Have a way to properly denote which one this is for.
+ */
+ if (likely((unsigned long)str >= TASK_SIZE)) {
+ /* For safety, do not trust the string pointer */
+ if (!strncpy_from_kernel_nofault(kstr, str, USTRING_BUF_SIZE))
+ return NULL;
+ } else {
+ /* user space address? */
+ ustr = (char __user *)str;
+ if (!strncpy_from_user_nofault(kstr, ustr, USTRING_BUF_SIZE))
+ return NULL;
+ }
+ return kstr;
+}
+
/* Filter predicate for fixed sized arrays of characters */
static int filter_pred_string(struct filter_pred *pred, void *event)
{
@@ -671,10 +713,16 @@ static int filter_pred_string(struct filter_pred *pred, void *event)
static int filter_pred_pchar(struct filter_pred *pred, void *event)
{
char **addr = (char **)(event + pred->offset);
+ char *str;
int cmp, match;
- int len = strlen(*addr) + 1; /* including tailing '\0' */
+ int len;
- cmp = pred->regex.match(*addr, &pred->regex, len);
+ str = test_string(*addr);
+ if (!str)
+ return 0;
+
+ len = strlen(str) + 1; /* including tailing '\0' */
+ cmp = pred->regex.match(str, &pred->regex, len);
match = cmp ^ pred->not;
@@ -1320,8 +1368,17 @@ static int parse_pred(const char *str, void *data,
} else if (field->filter_type == FILTER_DYN_STRING)
pred->fn = filter_pred_strloc;
- else
+ else {
+
+ if (!ustring_per_cpu) {
+ /* Once allocated, keep it around for good */
+ ustring_per_cpu = alloc_percpu(struct ustring_buffer);
+ if (!ustring_per_cpu)
+ goto err_mem;
+ }
+
pred->fn = filter_pred_pchar;
+ }
/* go past the last quote */
i++;
@@ -1387,6 +1444,9 @@ static int parse_pred(const char *str, void *data,
err_free:
kfree(pred);
return -EINVAL;
+err_mem:
+ kfree(pred);
+ return -ENOMEM;
}
enum {
--
2.34.1
From: Valentin Caron <[email protected]>
[ Upstream commit d3d079bde07e1b7deaeb57506dc0b86010121d17 ]
When sending x_char in stm32_usart_transmit_chars(), driver can overwrite
the value of TDR register by the value of x_char. If this happens, the
previous value that was present in TDR register will not be sent through
uart.
This code checks if the previous value in TDR register is sent before
writing the x_char value into register.
Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Cc: stable <[email protected]>
Signed-off-by: Valentin Caron <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/serial/stm32-usart.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 0eadf0547175c..6afae051ba8d1 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -420,10 +420,22 @@ static void stm32_usart_transmit_chars(struct uart_port *port)
struct stm32_port *stm32_port = to_stm32_port(port);
const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs;
struct circ_buf *xmit = &port->state->xmit;
+ u32 isr;
+ int ret;
if (port->x_char) {
if (stm32_port->tx_dma_busy)
stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_DMAT);
+
+ /* Check that TDR is empty before filling FIFO */
+ ret =
+ readl_relaxed_poll_timeout_atomic(port->membase + ofs->isr,
+ isr,
+ (isr & USART_SR_TXE),
+ 10, 1000);
+ if (ret)
+ dev_warn(port->dev, "1 character may be erased\n");
+
writel_relaxed(port->x_char, port->membase + ofs->tdr);
port->x_char = 0;
port->icount.tx++;
--
2.34.1
From: Qiang Yu <[email protected]>
[ Upstream commit c1a66c3bc425ff93774fb2f6eefa67b83170dd7e ]
Workstation application ANSA/META v21.1.4 get this error dmesg when
running CI test suite provided by ANSA/META:
[drm:amdgpu_gem_va_ioctl [amdgpu]] *ERROR* Couldn't update BO_VA (-16)
This is caused by:
1. create a 256MB buffer in invisible VRAM
2. CPU map the buffer and access it causes vm_fault and try to move
it to visible VRAM
3. force visible VRAM space and traverse all VRAM bos to check if
evicting this bo is valuable
4. when checking a VM bo (in invisible VRAM), amdgpu_vm_evictable()
will set amdgpu_vm->evicting, but latter due to not in visible
VRAM, won't really evict it so not add it to amdgpu_vm->evicted
5. before next CS to clear the amdgpu_vm->evicting, user VM ops
ioctl will pass amdgpu_vm_ready() (check amdgpu_vm->evicted)
but fail in amdgpu_vm_bo_update_mapping() (check
amdgpu_vm->evicting) and get this error log
This error won't affect functionality as next CS will finish the
waiting VM ops. But we'd better clear the error log by checking
the amdgpu_vm->evicting flag in amdgpu_vm_ready() to stop calling
amdgpu_vm_bo_update_mapping() later.
Another reason is amdgpu_vm->evicted list holds all BOs (both
user buffer and page table), but only page table BOs' eviction
prevent VM ops. amdgpu_vm->evicting flag is set only for page
table BOs, so we should use evicting flag instead of evicted list
in amdgpu_vm_ready().
The side effect of this change is: previously blocked VM op (user
buffer in "evicted" list but no page table in it) gets done
immediately.
v2: update commit comments.
Acked-by: Paul Menzel <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Qiang Yu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
index b47829ff30af7..47cc038d7d506 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
@@ -715,11 +715,16 @@ int amdgpu_vm_validate_pt_bos(struct amdgpu_device *adev, struct amdgpu_vm *vm,
* Check if all VM PDs/PTs are ready for updates
*
* Returns:
- * True if eviction list is empty.
+ * True if VM is not evicting.
*/
bool amdgpu_vm_ready(struct amdgpu_vm *vm)
{
- return list_empty(&vm->evicted);
+ bool ret;
+
+ amdgpu_vm_eviction_lock(vm);
+ ret = !vm->evicting;
+ amdgpu_vm_eviction_unlock(vm);
+ return ret;
}
/**
--
2.34.1
From: Leon Romanovsky <[email protected]>
commit 7c76ecd9c99b6e9a771d813ab1aa7fa428b3ade1 upstream.
struct xfrm_user_offload has flags variable that received user input,
but kernel didn't check if valid bits were provided. It caused a situation
where not sanitized input was forwarded directly to the drivers.
For example, XFRM_OFFLOAD_IPV6 define that was exposed, was used by
strongswan, but not implemented in the kernel at all.
As a solution, check and sanitize input flags to forward
XFRM_OFFLOAD_INBOUND to the drivers.
Fixes: d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/uapi/linux/xfrm.h | 6 ++++++
net/xfrm/xfrm_device.c | 6 +++++-
2 files changed, 11 insertions(+), 1 deletion(-)
--- a/include/uapi/linux/xfrm.h
+++ b/include/uapi/linux/xfrm.h
@@ -506,6 +506,12 @@ struct xfrm_user_offload {
int ifindex;
__u8 flags;
};
+/* This flag was exposed without any kernel code that supporting it.
+ * Unfortunately, strongswan has the code that uses sets this flag,
+ * which makes impossible to reuse this bit.
+ *
+ * So leave it here to make sure that it won't be reused by mistake.
+ */
#define XFRM_OFFLOAD_IPV6 1
#define XFRM_OFFLOAD_INBOUND 2
--- a/net/xfrm/xfrm_device.c
+++ b/net/xfrm/xfrm_device.c
@@ -223,6 +223,9 @@ int xfrm_dev_state_add(struct net *net,
if (x->encap || x->tfcpad)
return -EINVAL;
+ if (xuo->flags & ~(XFRM_OFFLOAD_IPV6 | XFRM_OFFLOAD_INBOUND))
+ return -EINVAL;
+
dev = dev_get_by_index(net, xuo->ifindex);
if (!dev) {
if (!(xuo->flags & XFRM_OFFLOAD_INBOUND)) {
@@ -261,7 +264,8 @@ int xfrm_dev_state_add(struct net *net,
xso->dev = dev;
xso->real_dev = dev;
xso->num_exthdrs = 1;
- xso->flags = xuo->flags;
+ /* Don't forward bit that is not implemented */
+ xso->flags = xuo->flags & ~XFRM_OFFLOAD_IPV6;
err = dev->xfrmdev_ops->xdo_dev_state_add(x);
if (err) {
From: Valentin Schneider <[email protected]>
commit 620a6dc40754dc218f5b6389b5d335e9a107fd29 upstream.
The deduplicating sort in sched_init_numa() assumes that the first line in
the distance table contains all unique values in the entire table. I've
been trying to pen what this exactly means for the topology, but it's not
straightforward. For instance, topology.c uses this example:
node 0 1 2 3
0: 10 20 20 30
1: 20 10 20 20
2: 20 20 10 20
3: 30 20 20 10
0 ----- 1
| / |
| / |
| / |
2 ----- 3
Which works out just fine. However, if we swap nodes 0 and 1:
1 ----- 0
| / |
| / |
| / |
2 ----- 3
we get this distance table:
node 0 1 2 3
0: 10 20 20 20
1: 20 10 20 30
2: 20 20 10 20
3: 20 30 20 10
Which breaks the deduplicating sort (non-representative first line). In
this case this would just be a renumbering exercise, but it so happens that
we can have a deduplicating sort that goes through the whole table in O(n²)
at the extra cost of a temporary memory allocation (i.e. any form of set).
The ACPI spec (SLIT) mentions distances are encoded on 8 bits. Following
this, implement the set as a 256-bits bitmap. Should this not be
satisfactory (i.e. we want to support 32-bit values), then we'll have to go
for some other sparse set implementation.
This has the added benefit of letting us allocate just the right amount of
memory for sched_domains_numa_distance[], rather than an arbitrary
(nr_node_ids + 1).
Note: DT binding equivalent (distance-map) decodes distances as 32-bit
values.
Signed-off-by: Valentin Schneider <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: dann frazier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/topology.h | 1
kernel/sched/topology.c | 99 ++++++++++++++++++++++-------------------------
2 files changed, 49 insertions(+), 51 deletions(-)
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -48,6 +48,7 @@ int arch_update_cpu_topology(void);
/* Conform to ACPI 2.0 SLIT distance definitions */
#define LOCAL_DISTANCE 10
#define REMOTE_DISTANCE 20
+#define DISTANCE_BITS 8
#ifndef node_distance
#define node_distance(from,to) ((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE)
#endif
--- a/kernel/sched/topology.c
+++ b/kernel/sched/topology.c
@@ -1549,66 +1549,58 @@ static void init_numa_topology_type(void
}
}
+
+#define NR_DISTANCE_VALUES (1 << DISTANCE_BITS)
+
void sched_init_numa(void)
{
- int next_distance, curr_distance = node_distance(0, 0);
struct sched_domain_topology_level *tl;
- int level = 0;
- int i, j, k;
-
- sched_domains_numa_distance = kzalloc(sizeof(int) * (nr_node_ids + 1), GFP_KERNEL);
- if (!sched_domains_numa_distance)
- return;
-
- /* Includes NUMA identity node at level 0. */
- sched_domains_numa_distance[level++] = curr_distance;
- sched_domains_numa_levels = level;
+ unsigned long *distance_map;
+ int nr_levels = 0;
+ int i, j;
/*
* O(nr_nodes^2) deduplicating selection sort -- in order to find the
* unique distances in the node_distance() table.
- *
- * Assumes node_distance(0,j) includes all distances in
- * node_distance(i,j) in order to avoid cubic time.
*/
- next_distance = curr_distance;
+ distance_map = bitmap_alloc(NR_DISTANCE_VALUES, GFP_KERNEL);
+ if (!distance_map)
+ return;
+
+ bitmap_zero(distance_map, NR_DISTANCE_VALUES);
for (i = 0; i < nr_node_ids; i++) {
for (j = 0; j < nr_node_ids; j++) {
- for (k = 0; k < nr_node_ids; k++) {
- int distance = node_distance(i, k);
+ int distance = node_distance(i, j);
- if (distance > curr_distance &&
- (distance < next_distance ||
- next_distance == curr_distance))
- next_distance = distance;
-
- /*
- * While not a strong assumption it would be nice to know
- * about cases where if node A is connected to B, B is not
- * equally connected to A.
- */
- if (sched_debug() && node_distance(k, i) != distance)
- sched_numa_warn("Node-distance not symmetric");
-
- if (sched_debug() && i && !find_numa_distance(distance))
- sched_numa_warn("Node-0 not representative");
+ if (distance < LOCAL_DISTANCE || distance >= NR_DISTANCE_VALUES) {
+ sched_numa_warn("Invalid distance value range");
+ return;
}
- if (next_distance != curr_distance) {
- sched_domains_numa_distance[level++] = next_distance;
- sched_domains_numa_levels = level;
- curr_distance = next_distance;
- } else break;
+
+ bitmap_set(distance_map, distance, 1);
}
+ }
+ /*
+ * We can now figure out how many unique distance values there are and
+ * allocate memory accordingly.
+ */
+ nr_levels = bitmap_weight(distance_map, NR_DISTANCE_VALUES);
- /*
- * In case of sched_debug() we verify the above assumption.
- */
- if (!sched_debug())
- break;
+ sched_domains_numa_distance = kcalloc(nr_levels, sizeof(int), GFP_KERNEL);
+ if (!sched_domains_numa_distance) {
+ bitmap_free(distance_map);
+ return;
}
+ for (i = 0, j = 0; i < nr_levels; i++, j++) {
+ j = find_next_bit(distance_map, NR_DISTANCE_VALUES, j);
+ sched_domains_numa_distance[i] = j;
+ }
+
+ bitmap_free(distance_map);
+
/*
- * 'level' contains the number of unique distances
+ * 'nr_levels' contains the number of unique distances
*
* The sched_domains_numa_distance[] array includes the actual distance
* numbers.
@@ -1617,15 +1609,15 @@ void sched_init_numa(void)
/*
* Here, we should temporarily reset sched_domains_numa_levels to 0.
* If it fails to allocate memory for array sched_domains_numa_masks[][],
- * the array will contain less then 'level' members. This could be
+ * the array will contain less then 'nr_levels' members. This could be
* dangerous when we use it to iterate array sched_domains_numa_masks[][]
* in other functions.
*
- * We reset it to 'level' at the end of this function.
+ * We reset it to 'nr_levels' at the end of this function.
*/
sched_domains_numa_levels = 0;
- sched_domains_numa_masks = kzalloc(sizeof(void *) * level, GFP_KERNEL);
+ sched_domains_numa_masks = kzalloc(sizeof(void *) * nr_levels, GFP_KERNEL);
if (!sched_domains_numa_masks)
return;
@@ -1633,7 +1625,7 @@ void sched_init_numa(void)
* Now for each level, construct a mask per node which contains all
* CPUs of nodes that are that many hops away from us.
*/
- for (i = 0; i < level; i++) {
+ for (i = 0; i < nr_levels; i++) {
sched_domains_numa_masks[i] =
kzalloc(nr_node_ids * sizeof(void *), GFP_KERNEL);
if (!sched_domains_numa_masks[i])
@@ -1641,12 +1633,17 @@ void sched_init_numa(void)
for (j = 0; j < nr_node_ids; j++) {
struct cpumask *mask = kzalloc(cpumask_size(), GFP_KERNEL);
+ int k;
+
if (!mask)
return;
sched_domains_numa_masks[i][j] = mask;
for_each_node(k) {
+ if (sched_debug() && (node_distance(j, k) != node_distance(k, j)))
+ sched_numa_warn("Node-distance not symmetric");
+
if (node_distance(j, k) > sched_domains_numa_distance[i])
continue;
@@ -1658,7 +1655,7 @@ void sched_init_numa(void)
/* Compute default topology size */
for (i = 0; sched_domain_topology[i].mask; i++);
- tl = kzalloc((i + level + 1) *
+ tl = kzalloc((i + nr_levels) *
sizeof(struct sched_domain_topology_level), GFP_KERNEL);
if (!tl)
return;
@@ -1681,7 +1678,7 @@ void sched_init_numa(void)
/*
* .. and append 'j' levels of NUMA goodness.
*/
- for (j = 1; j < level; i++, j++) {
+ for (j = 1; j < nr_levels; i++, j++) {
tl[i] = (struct sched_domain_topology_level){
.mask = sd_numa_mask,
.sd_flags = cpu_numa_flags,
@@ -1693,8 +1690,8 @@ void sched_init_numa(void)
sched_domain_topology = tl;
- sched_domains_numa_levels = level;
- sched_max_numa_distance = sched_domains_numa_distance[level - 1];
+ sched_domains_numa_levels = nr_levels;
+ sched_max_numa_distance = sched_domains_numa_distance[nr_levels - 1];
init_numa_topology_type();
}
From: Eric Dumazet <[email protected]>
commit 60ce37b03917e593d8e5d8bcc7ec820773daf81d upstream.
Currently, sk_psock_verdict_recv() returns skb->len
This is problematic because tcp_read_sock() might have
passed orig_len < skb->len, due to the presence of TCP urgent data.
This causes an infinite loop from tcp_read_sock()
Followup patch will make tcp_read_sock() more robust vs bad actors.
Fixes: ef5659280eb1 ("bpf, sockmap: Allow skipping sk_skb parser program")
Reported-by: syzbot <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Acked-by: John Fastabend <[email protected]>
Acked-by: Jakub Sitnicki <[email protected]>
Tested-by: Jakub Sitnicki <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/skmsg.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/core/skmsg.c
+++ b/net/core/skmsg.c
@@ -943,7 +943,7 @@ static int sk_psock_verdict_recv(read_de
struct sk_psock *psock;
struct bpf_prog *prog;
int ret = __SK_DROP;
- int len = skb->len;
+ int len = orig_len;
/* clone here so sk_eat_skb() in tcp_read_sock does not drop our data */
skb = skb_clone(skb, GFP_ATOMIC);
From: Marek Vasut <[email protected]>
commit 9bdd10d57a8807dba0003af0325191f3cec0f11c upstream.
While the $val/$val2 values passed in from userspace are always >= 0
integers, the limits of the control can be signed integers and the $min
can be non-zero and less than zero. To correctly validate $val/$val2
against platform_max, add the $min offset to val first.
Fixes: 817f7c9335ec0 ("ASoC: ops: Reject out of bounds values in snd_soc_put_volsw()")
Signed-off-by: Marek Vasut <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/soc-ops.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -317,7 +317,7 @@ int snd_soc_put_volsw(struct snd_kcontro
mask = BIT(sign_bit + 1) - 1;
val = ucontrol->value.integer.value[0];
- if (mc->platform_max && val > mc->platform_max)
+ if (mc->platform_max && ((int)val + min) > mc->platform_max)
return -EINVAL;
if (val > max - min)
return -EINVAL;
@@ -330,7 +330,7 @@ int snd_soc_put_volsw(struct snd_kcontro
val = val << shift;
if (snd_soc_volsw_is_stereo(mc)) {
val2 = ucontrol->value.integer.value[1];
- if (mc->platform_max && val2 > mc->platform_max)
+ if (mc->platform_max && ((int)val2 + min) > mc->platform_max)
return -EINVAL;
if (val2 > max - min)
return -EINVAL;
From: lena wang <[email protected]>
commit 224102de2ff105a2c05695e66a08f4b5b6b2d19c upstream.
The truesize for a UDP GRO packet is added by main skb and skbs in main
skb's frag_list:
skb_gro_receive_list
p->truesize += skb->truesize;
The commit 53475c5dd856 ("net: fix use-after-free when UDP GRO with
shared fraglist") introduced a truesize increase for frag_list skbs.
When uncloning skb, it will call pskb_expand_head and trusesize for
frag_list skbs may increase. This can occur when allocators uses
__netdev_alloc_skb and not jump into __alloc_skb. This flow does not
use ksize(len) to calculate truesize while pskb_expand_head uses.
skb_segment_list
err = skb_unclone(nskb, GFP_ATOMIC);
pskb_expand_head
if (!skb->sk || skb->destructor == sock_edemux)
skb->truesize += size - osize;
If we uses increased truesize adding as delta_truesize, it will be
larger than before and even larger than previous total truesize value
if skbs in frag_list are abundant. The main skb truesize will become
smaller and even a minus value or a huge value for an unsigned int
parameter. Then the following memory check will drop this abnormal skb.
To avoid this error we should use the original truesize to segment the
main skb.
Fixes: 53475c5dd856 ("net: fix use-after-free when UDP GRO with shared fraglist")
Signed-off-by: lena wang <[email protected]>
Acked-by: Paolo Abeni <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/skbuff.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -3690,6 +3690,7 @@ struct sk_buff *skb_segment_list(struct
list_skb = list_skb->next;
err = 0;
+ delta_truesize += nskb->truesize;
if (skb_shared(nskb)) {
tmp = skb_clone(nskb, GFP_ATOMIC);
if (tmp) {
@@ -3714,7 +3715,6 @@ struct sk_buff *skb_segment_list(struct
tail = nskb;
delta_len += nskb->len;
- delta_truesize += nskb->truesize;
skb_push(nskb, -skb_network_offset(nskb) + offset);
From: Nicolas Escande <[email protected]>
commit 859ae7018316daa4adbc496012dcbbb458d7e510 upstream.
There are two problems with the current code that have been highlighted
with the AQL feature that is now enbaled by default.
First problem is in ieee80211_rx_h_mesh_fwding(),
ieee80211_select_queue_80211() is used on received packets to choose
the sending AC queue of the forwarding packet although this function
should only be called on TX packet (it uses ieee80211_tx_info).
This ends with forwarded mesh packets been sent on unrelated random AC
queue. To fix that, AC queue can directly be infered from skb->priority
which has been extracted from QOS info (see ieee80211_parse_qos()).
Second problem is the value of queue_mapping set on forwarded mesh
frames via skb_set_queue_mapping() is not the AC of the packet but a
hardware queue index. This may or may not work depending on AC to HW
queue mapping which is driver specific.
Both of these issues lead to improper AC selection while forwarding
mesh packets but more importantly due to improper airtime accounting
(which is done on a per STA, per AC basis) caused traffic stall with
the introduction of AQL.
Fixes: cf44012810cc ("mac80211: fix unnecessary frame drops in mesh fwding")
Fixes: d3c1597b8d1b ("mac80211: fix forwarded mesh frame queue mapping")
Co-developed-by: Remi Pommarel <[email protected]>
Signed-off-by: Remi Pommarel <[email protected]>
Signed-off-by: Nicolas Escande <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/rx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2910,13 +2910,13 @@ ieee80211_rx_h_mesh_fwding(struct ieee80
ether_addr_equal(sdata->vif.addr, hdr->addr3))
return RX_CONTINUE;
- ac = ieee80211_select_queue_80211(sdata, skb, hdr);
+ ac = ieee802_1d_to_ac[skb->priority];
q = sdata->vif.hw_queue[ac];
if (ieee80211_queue_stopped(&local->hw, q)) {
IEEE80211_IFSTA_MESH_CTR_INC(ifmsh, dropped_frames_congestion);
return RX_DROP_MONITOR;
}
- skb_set_queue_mapping(skb, q);
+ skb_set_queue_mapping(skb, ac);
if (!--mesh_hdr->ttl) {
if (!is_multicast_ether_addr(hdr->addr1))
From: Dietmar Eggemann <[email protected]>
commit 71e5f6644fb2f3304fcb310145ded234a37e7cc1 upstream.
Commit "sched/topology: Make sched_init_numa() use a set for the
deduplicating sort" allocates 'i + nr_levels (level)' instead of
'i + nr_levels + 1' sched_domain_topology_level.
This led to an Oops (on Arm64 juno with CONFIG_SCHED_DEBUG):
sched_init_domains
build_sched_domains()
__free_domain_allocs()
__sdt_free() {
...
for_each_sd_topology(tl)
...
sd = *per_cpu_ptr(sdd->sd, j); <--
...
}
Signed-off-by: Dietmar Eggemann <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Tested-by: Vincent Guittot <[email protected]>
Tested-by: Barry Song <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: dann frazier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/sched/topology.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/sched/topology.c
+++ b/kernel/sched/topology.c
@@ -1655,7 +1655,7 @@ void sched_init_numa(void)
/* Compute default topology size */
for (i = 0; sched_domain_topology[i].mask; i++);
- tl = kzalloc((i + nr_levels) *
+ tl = kzalloc((i + nr_levels + 1) *
sizeof(struct sched_domain_topology_level), GFP_KERNEL);
if (!tl)
return;
From: Alexandre Ghiti <[email protected]>
commit c648c4bb7d02ceb53ee40172fdc4433b37cee9c6 upstream.
__virt_to_phys function is called very early in the boot process (ie
kasan_early_init) so it should not be instrumented by KASAN otherwise it
bugs.
Fix this by declaring phys_addr.c as non-kasan instrumentable.
Signed-off-by: Alexandre Ghiti <[email protected]>
Fixes: 8ad8b72721d0 (riscv: Add KASAN support)
Cc: [email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/riscv/mm/Makefile | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/riscv/mm/Makefile
+++ b/arch/riscv/mm/Makefile
@@ -24,6 +24,9 @@ obj-$(CONFIG_KASAN) += kasan_init.o
ifdef CONFIG_KASAN
KASAN_SANITIZE_kasan_init.o := n
KASAN_SANITIZE_init.o := n
+ifdef CONFIG_DEBUG_VIRTUAL
+KASAN_SANITIZE_physaddr.o := n
+endif
endif
obj-$(CONFIG_DEBUG_VIRTUAL) += physaddr.o
From: Christophe Vu-Brugier <[email protected]>
[ Upstream commit 92fba084b79e6bc7b12fc118209f1922c1a2df56 ]
In exfat_truncate(), the computation of inode->i_blocks is wrong if
the file is larger than 4 GiB because a 32-bit variable is used as a
mask. This is fixed and simplified by using round_up().
Also fix the same buggy computation in exfat_read_root() and another
(correct) one in exfat_fill_inode(). The latter was fixed another way
last month but can be simplified by using round_up() as well. See:
commit 0c336d6e33f4 ("exfat: fix incorrect loading of i_blocks for
large files")
Fixes: 98d917047e8b ("exfat: add file operations")
Cc: [email protected] # v5.7+
Suggested-by: Matthew Wilcox <[email protected]>
Reviewed-by: Sungjong Seo <[email protected]>
Signed-off-by: Christophe Vu-Brugier <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/exfat/file.c | 4 ++--
fs/exfat/inode.c | 4 ++--
fs/exfat/super.c | 4 ++--
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/fs/exfat/file.c b/fs/exfat/file.c
index 6258c5da3060b..c819e8427ea57 100644
--- a/fs/exfat/file.c
+++ b/fs/exfat/file.c
@@ -250,8 +250,8 @@ void exfat_truncate(struct inode *inode, loff_t size)
else
mark_inode_dirty(inode);
- inode->i_blocks = ((i_size_read(inode) + (sbi->cluster_size - 1)) &
- ~(sbi->cluster_size - 1)) >> inode->i_blkbits;
+ inode->i_blocks = round_up(i_size_read(inode), sbi->cluster_size) >>
+ inode->i_blkbits;
write_size:
aligned_size = i_size_read(inode);
if (aligned_size & (blocksize - 1)) {
diff --git a/fs/exfat/inode.c b/fs/exfat/inode.c
index d7f11b7ab46c5..2a9f6a80584ee 100644
--- a/fs/exfat/inode.c
+++ b/fs/exfat/inode.c
@@ -600,8 +600,8 @@ static int exfat_fill_inode(struct inode *inode, struct exfat_dir_entry *info)
exfat_save_attr(inode, info->attr);
- inode->i_blocks = ((i_size_read(inode) + (sbi->cluster_size - 1)) &
- ~((loff_t)sbi->cluster_size - 1)) >> inode->i_blkbits;
+ inode->i_blocks = round_up(i_size_read(inode), sbi->cluster_size) >>
+ inode->i_blkbits;
inode->i_mtime = info->mtime;
inode->i_ctime = info->mtime;
ei->i_crtime = info->crtime;
diff --git a/fs/exfat/super.c b/fs/exfat/super.c
index 7b91214a4110e..cd04c912f02e0 100644
--- a/fs/exfat/super.c
+++ b/fs/exfat/super.c
@@ -364,8 +364,8 @@ static int exfat_read_root(struct inode *inode)
inode->i_op = &exfat_dir_inode_operations;
inode->i_fop = &exfat_dir_operations;
- inode->i_blocks = ((i_size_read(inode) + (sbi->cluster_size - 1))
- & ~(sbi->cluster_size - 1)) >> inode->i_blkbits;
+ inode->i_blocks = round_up(i_size_read(inode), sbi->cluster_size) >>
+ inode->i_blkbits;
ei->i_pos = ((loff_t)sbi->root_dir << 32) | 0xffffffff;
ei->i_size_aligned = i_size_read(inode);
ei->i_size_ondisk = i_size_read(inode);
--
2.34.1
From: Sunil V L <[email protected]>
commit dcf0c838854c86e1f41fb1934aea906845d69782 upstream.
The get_boot_hartid_from_fdt() function currently returns U32_MAX
for failure case which is not correct because U32_MAX is a valid
hartid value. This patch fixes the issue by returning error code.
Cc: <[email protected]>
Fixes: d7071743db31 ("RISC-V: Add EFI stub support.")
Signed-off-by: Sunil V L <[email protected]>
Reviewed-by: Heinrich Schuchardt <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/firmware/efi/libstub/riscv-stub.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/firmware/efi/libstub/riscv-stub.c b/drivers/firmware/efi/libstub/riscv-stub.c
index 380e4e251399..9c460843442f 100644
--- a/drivers/firmware/efi/libstub/riscv-stub.c
+++ b/drivers/firmware/efi/libstub/riscv-stub.c
@@ -25,7 +25,7 @@ typedef void __noreturn (*jump_kernel_func)(unsigned int, unsigned long);
static u32 hartid;
-static u32 get_boot_hartid_from_fdt(void)
+static int get_boot_hartid_from_fdt(void)
{
const void *fdt;
int chosen_node, len;
@@ -33,23 +33,26 @@ static u32 get_boot_hartid_from_fdt(void)
fdt = get_efi_config_table(DEVICE_TREE_GUID);
if (!fdt)
- return U32_MAX;
+ return -EINVAL;
chosen_node = fdt_path_offset(fdt, "/chosen");
if (chosen_node < 0)
- return U32_MAX;
+ return -EINVAL;
prop = fdt_getprop((void *)fdt, chosen_node, "boot-hartid", &len);
if (!prop || len != sizeof(u32))
- return U32_MAX;
+ return -EINVAL;
- return fdt32_to_cpu(*prop);
+ hartid = fdt32_to_cpu(*prop);
+ return 0;
}
efi_status_t check_platform_features(void)
{
- hartid = get_boot_hartid_from_fdt();
- if (hartid == U32_MAX) {
+ int ret;
+
+ ret = get_boot_hartid_from_fdt();
+ if (ret) {
efi_err("/chosen/boot-hartid missing or invalid!\n");
return EFI_UNSUPPORTED;
}
--
2.35.1
From: Zhen Ni <[email protected]>
commit 0aa6b294b312d9710804679abd2c0c8ca52cc2bc upstream.
PCM buffers might be allocated dynamically when the buffer
preallocation failed or a larger buffer is requested, and it's not
guaranteed that substream->dma_buffer points to the actually used
buffer. The driver needs to refer to substream->runtime->dma_addr
instead for the buffer address.
Signed-off-by: Zhen Ni <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/x86/intel_hdmi_audio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/x86/intel_hdmi_audio.c
+++ b/sound/x86/intel_hdmi_audio.c
@@ -1276,7 +1276,7 @@ static int had_pcm_mmap(struct snd_pcm_s
{
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
return remap_pfn_range(vma, vma->vm_start,
- substream->dma_buffer.addr >> PAGE_SHIFT,
+ substream->runtime->dma_addr >> PAGE_SHIFT,
vma->vm_end - vma->vm_start, vma->vm_page_prot);
}
From: Alexandre Ghiti <[email protected]>
commit a3d328037846d013bb4c7f3777241e190e4c75e1 upstream.
In order to get the pfn of a struct page* when sparsemem is enabled
without vmemmap, the mem_section structures need to be initialized which
happens in sparse_init.
But kasan_early_init calls pfn_to_page way before sparse_init is called,
which then tries to dereference a null mem_section pointer.
Fix this by removing the usage of this function in kasan_early_init.
Fixes: 8ad8b72721d0 ("riscv: Add KASAN support")
Signed-off-by: Alexandre Ghiti <[email protected]>
Cc: [email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/riscv/mm/kasan_init.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/arch/riscv/mm/kasan_init.c
+++ b/arch/riscv/mm/kasan_init.c
@@ -21,8 +21,7 @@ asmlinkage void __init kasan_early_init(
for (i = 0; i < PTRS_PER_PTE; ++i)
set_pte(kasan_early_shadow_pte + i,
- mk_pte(virt_to_page(kasan_early_shadow_page),
- PAGE_KERNEL));
+ pfn_pte(virt_to_pfn(kasan_early_shadow_page), PAGE_KERNEL));
for (i = 0; i < PTRS_PER_PMD; ++i)
set_pmd(kasan_early_shadow_pmd + i,
From: Corinna Vinschen <[email protected]>
commit fda2635466cd26ad237e1bc5d3f6a60f97ad09b6 upstream.
igc_read_phy_reg_gpy checks the return value from igc_read_phy_reg_mdic
and if it's not 0, returns immediately. By doing this, it leaves the HW
semaphore in the acquired state.
Drop this premature return statement, the function returns after
releasing the semaphore immediately anyway.
Fixes: 5586838fe9ce ("igc: Add code for PHY support")
Signed-off-by: Corinna Vinschen <[email protected]>
Acked-by: Sasha Neftin <[email protected]>
Tested-by: Naama Meir <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/intel/igc/igc_phy.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/net/ethernet/intel/igc/igc_phy.c
+++ b/drivers/net/ethernet/intel/igc/igc_phy.c
@@ -781,8 +781,6 @@ s32 igc_read_phy_reg_gpy(struct igc_hw *
if (ret_val)
return ret_val;
ret_val = igc_read_phy_reg_mdic(hw, offset, data);
- if (ret_val)
- return ret_val;
hw->phy.ops.release(hw);
} else {
ret_val = igc_read_xmdio_reg(hw, (u16)offset, dev_addr,
From: Samuel Holland <[email protected]>
commit bac129dbc6560dfeb634c03f0c08b78024e71915 upstream.
This driver, like several others, uses a chained IRQ for each GPIO bank,
and forwards .irq_set_wake to the GPIO bank's upstream IRQ. As a result,
a call to irq_set_irq_wake() needs to lock both the upstream and
downstream irq_desc's. Lockdep considers this to be a possible deadlock
when the irq_desc's share lockdep classes, which they do by default:
============================================
WARNING: possible recursive locking detected
5.17.0-rc3-00394-gc849047c2473 #1 Not tainted
--------------------------------------------
init/307 is trying to acquire lock:
c2dfe27c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0x58/0xa0
but task is already holding lock:
c3c0ac7c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0x58/0xa0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&irq_desc_lock_class);
lock(&irq_desc_lock_class);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by init/307:
#0: c1f29f18 (system_transition_mutex){+.+.}-{3:3}, at: __do_sys_reboot+0x90/0x23c
#1: c20f7760 (&dev->mutex){....}-{3:3}, at: device_shutdown+0xf4/0x224
#2: c2e804d8 (&dev->mutex){....}-{3:3}, at: device_shutdown+0x104/0x224
#3: c3c0ac7c (&irq_desc_lock_class){-.-.}-{2:2}, at: __irq_get_desc_lock+0x58/0xa0
stack backtrace:
CPU: 0 PID: 307 Comm: init Not tainted 5.17.0-rc3-00394-gc849047c2473 #1
Hardware name: Allwinner sun8i Family
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x68/0x90
dump_stack_lvl from __lock_acquire+0x1680/0x31a0
__lock_acquire from lock_acquire+0x148/0x3dc
lock_acquire from _raw_spin_lock_irqsave+0x50/0x6c
_raw_spin_lock_irqsave from __irq_get_desc_lock+0x58/0xa0
__irq_get_desc_lock from irq_set_irq_wake+0x2c/0x19c
irq_set_irq_wake from irq_set_irq_wake+0x13c/0x19c
[tail call from sunxi_pinctrl_irq_set_wake]
irq_set_irq_wake from gpio_keys_suspend+0x80/0x1a4
gpio_keys_suspend from gpio_keys_shutdown+0x10/0x2c
gpio_keys_shutdown from device_shutdown+0x180/0x224
device_shutdown from __do_sys_reboot+0x134/0x23c
__do_sys_reboot from ret_fast_syscall+0x0/0x1c
However, this can never deadlock because the upstream and downstream
IRQs are never the same (nor do they even involve the same irqchip).
Silence this erroneous lockdep splat by applying what appears to be the
usual fix of moving the GPIO IRQs to separate lockdep classes.
Fixes: a59c99d9eaf9 ("pinctrl: sunxi: Forward calls to irq_set_irq_wake")
Reported-by: Guenter Roeck <[email protected]>
Signed-off-by: Samuel Holland <[email protected]>
Reviewed-by: Jernej Skrabec <[email protected]>
Tested-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -36,6 +36,13 @@
#include "../core.h"
#include "pinctrl-sunxi.h"
+/*
+ * These lock classes tell lockdep that GPIO IRQs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key sunxi_pinctrl_irq_lock_class;
+static struct lock_class_key sunxi_pinctrl_irq_request_class;
+
static struct irq_chip sunxi_pinctrl_edge_irq_chip;
static struct irq_chip sunxi_pinctrl_level_irq_chip;
@@ -1552,6 +1559,8 @@ int sunxi_pinctrl_init_with_variant(stru
for (i = 0; i < (pctl->desc->irq_banks * IRQ_PER_BANK); i++) {
int irqno = irq_create_mapping(pctl->domain, i);
+ irq_set_lockdep_class(irqno, &sunxi_pinctrl_irq_lock_class,
+ &sunxi_pinctrl_irq_request_class);
irq_set_chip_and_handler(irqno, &sunxi_pinctrl_edge_irq_chip,
handle_edge_irq);
irq_set_chip_data(irqno, pctl);
From: Johannes Berg <[email protected]>
commit 94d9864cc86f572f881db9b842a78e9d075493ae upstream.
When we get anti-clogging token required (added by the commit
mentioned below), or the other status codes added by the later
commit 4e56cde15f7d ("mac80211: Handle special status codes in
SAE commit") we currently just pretend (towards the internal
state machine of authentication) that we didn't receive anything.
This has the undesirable consequence of retransmitting the prior
frame, which is not expected, because the timer is still armed.
If we just disarm the timer at that point, it would result in
the undesirable side effect of being in this state indefinitely
if userspace crashes, or so.
So to fix this, reset the timer and set a new auth_data->waiting
in order to have no more retransmissions, but to have the data
destroyed when the timer actually fires, which will only happen
if userspace didn't continue (i.e. crashed or abandoned it.)
Fixes: a4055e74a2ff ("mac80211: Don't destroy auth data in case of anti-clogging")
Reported-by: Jouni Malinen <[email protected]>
Link: https://lore.kernel.org/r/20220224103932.75964e1d7932.Ia487f91556f29daae734bf61f8181404642e1eec@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/ieee80211_i.h | 2 +-
net/mac80211/mlme.c | 16 ++++++++++++----
2 files changed, 13 insertions(+), 5 deletions(-)
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -374,7 +374,7 @@ struct ieee80211_mgd_auth_data {
u8 key[WLAN_KEY_LEN_WEP104];
u8 key_len, key_idx;
- bool done;
+ bool done, waiting;
bool peer_confirmed;
bool timeout_started;
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -37,6 +37,7 @@
#define IEEE80211_AUTH_TIMEOUT_SAE (HZ * 2)
#define IEEE80211_AUTH_MAX_TRIES 3
#define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5)
+#define IEEE80211_AUTH_WAIT_SAE_RETRY (HZ * 2)
#define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
#define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2)
#define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10)
@@ -2999,8 +3000,15 @@ static void ieee80211_rx_mgmt_auth(struc
(status_code == WLAN_STATUS_ANTI_CLOG_REQUIRED ||
(auth_transaction == 1 &&
(status_code == WLAN_STATUS_SAE_HASH_TO_ELEMENT ||
- status_code == WLAN_STATUS_SAE_PK))))
+ status_code == WLAN_STATUS_SAE_PK)))) {
+ /* waiting for userspace now */
+ ifmgd->auth_data->waiting = true;
+ ifmgd->auth_data->timeout =
+ jiffies + IEEE80211_AUTH_WAIT_SAE_RETRY;
+ ifmgd->auth_data->timeout_started = true;
+ run_again(sdata, ifmgd->auth_data->timeout);
return;
+ }
sdata_info(sdata, "%pM denied authentication (status %d)\n",
mgmt->sa, status_code);
@@ -4526,10 +4534,10 @@ void ieee80211_sta_work(struct ieee80211
if (ifmgd->auth_data && ifmgd->auth_data->timeout_started &&
time_after(jiffies, ifmgd->auth_data->timeout)) {
- if (ifmgd->auth_data->done) {
+ if (ifmgd->auth_data->done || ifmgd->auth_data->waiting) {
/*
- * ok ... we waited for assoc but userspace didn't,
- * so let's just kill the auth data
+ * ok ... we waited for assoc or continuation but
+ * userspace didn't do it, so kill the auth data
*/
ieee80211_destroy_auth_data(sdata, false);
} else if (ieee80211_auth(sdata)) {
From: Valentin Schneider <[email protected]>
commit b22a8f7b4bde4e4ab73b64908ffd5d90ecdcdbfd upstream.
John Paul reported a warning about bogus NUMA distance values spurred by
commit:
620a6dc40754 ("sched/topology: Make sched_init_numa() use a set for the deduplicating sort")
In this case, the afflicted machine comes up with a reported 256 possible
nodes, all of which are 0 distance away from one another. This was
previously silently ignored, but is now caught by the aforementioned
commit.
The culprit is ia64's node_possible_map which remains unchanged from its
initialization value of NODE_MASK_ALL. In John's case, the machine
doesn't have any SRAT nor SLIT table, but AIUI the possible map remains
untouched regardless of what ACPI tables end up being parsed. Thus,
!online && possible nodes remain with a bogus distance of 0 (distances \in
[0, 9] are "reserved and have no meaning" as per the ACPI spec).
Follow x86 / drivers/base/arch_numa's example and set the possible map to
the parsed map, which in this case seems to be the online map.
Link: http://lore.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 620a6dc40754 ("sched/topology: Make sched_init_numa() use a set for the deduplicating sort")
Signed-off-by: Valentin Schneider <[email protected]>
Reported-by: John Paul Adrian Glaubitz <[email protected]>
Tested-by: John Paul Adrian Glaubitz <[email protected]>
Tested-by: Sergei Trofimovich <[email protected]>
Cc: "Peter Zijlstra (Intel)" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Vincent Guittot <[email protected]>
Cc: Dietmar Eggemann <[email protected]>
Cc: Anatoly Pugachev <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: dann frazier <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/ia64/kernel/acpi.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -446,7 +446,8 @@ void __init acpi_numa_fixup(void)
if (srat_num_cpus == 0) {
node_set_online(0);
node_cpuid[0].phys_id = hard_smp_processor_id();
- return;
+ slit_distance(0, 0) = LOCAL_DISTANCE;
+ goto out;
}
/*
@@ -489,7 +490,7 @@ void __init acpi_numa_fixup(void)
for (j = 0; j < MAX_NUMNODES; j++)
slit_distance(i, j) = i == j ?
LOCAL_DISTANCE : REMOTE_DISTANCE;
- return;
+ goto out;
}
memset(numa_slit, -1, sizeof(numa_slit));
@@ -514,6 +515,8 @@ void __init acpi_numa_fixup(void)
printk("\n");
}
#endif
+out:
+ node_possible_map = node_online_map;
}
#endif /* CONFIG_ACPI_NUMA */
From: Jiasheng Jiang <[email protected]>
[ Upstream commit a222fd8541394b36b13c89d1698d9530afd59a9c ]
As the possible failure of the ioremap(), the par_io could be NULL.
Therefore it should be better to check it and return error in order to
guarantee the success of the initiation.
But, I also notice that all the caller like mpc85xx_qe_par_io_init() in
`arch/powerpc/platforms/85xx/common.c` don't check the return value of
the par_io_init().
Actually, par_io_init() needs to check to handle the potential error.
I will submit another patch to fix that.
Anyway, par_io_init() itsely should be fixed.
Fixes: 7aa1aa6ecec2 ("QE: Move QE from arch/powerpc to drivers/soc")
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/fsl/qe/qe_io.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/soc/fsl/qe/qe_io.c b/drivers/soc/fsl/qe/qe_io.c
index 11ea08e97db7..1bb46d955d52 100644
--- a/drivers/soc/fsl/qe/qe_io.c
+++ b/drivers/soc/fsl/qe/qe_io.c
@@ -35,6 +35,8 @@ int par_io_init(struct device_node *np)
if (ret)
return ret;
par_io = ioremap(res.start, resource_size(&res));
+ if (!par_io)
+ return -ENOMEM;
if (!of_property_read_u32(np, "num-ports", &num_ports))
num_par_io_ports = num_ports;
--
2.34.1
From: Sukadev Bhattiprolu <[email protected]>
commit 570425f8c7c18b14fa8a2a58a0adb431968ad118 upstream.
Finish initializing the adapter before registering netdev so state
is consistent.
Fixes: c26eba03e407 ("ibmvnic: Update reset infrastructure to support tunable parameters")
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/ibm/ibmvnic.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -5383,6 +5383,12 @@ static int ibmvnic_probe(struct vio_dev
goto ibmvnic_dev_file_err;
netif_carrier_off(netdev);
+
+ adapter->state = VNIC_PROBED;
+
+ adapter->wait_for_reset = false;
+ adapter->last_reset_time = jiffies;
+
rc = register_netdev(netdev);
if (rc) {
dev_err(&dev->dev, "failed to register netdev rc=%d\n", rc);
@@ -5390,10 +5396,6 @@ static int ibmvnic_probe(struct vio_dev
}
dev_info(&dev->dev, "ibmvnic registered\n");
- adapter->state = VNIC_PROBED;
-
- adapter->wait_for_reset = false;
- adapter->last_reset_time = jiffies;
return 0;
ibmvnic_register_fail:
From: Jiasheng Jiang <[email protected]>
[ Upstream commit 6ad27f522cb3b210476daf63ce6ddb6568c0508b ]
As there's potential for failure of the nla_memdup(),
check the return value.
Fixes: a442b761b24b ("cfg80211: add add_nan_func / del_nan_func")
Signed-off-by: Jiasheng Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/wireless/nl80211.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 8fb0478888fb..07bd7b00b56d 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -12930,6 +12930,9 @@ static int handle_nan_filter(struct nlattr *attr_filter,
i = 0;
nla_for_each_nested(attr, attr_filter, rem) {
filter[i].filter = nla_memdup(attr, GFP_KERNEL);
+ if (!filter[i].filter)
+ goto err;
+
filter[i].len = nla_len(attr);
i++;
}
@@ -12942,6 +12945,15 @@ static int handle_nan_filter(struct nlattr *attr_filter,
}
return 0;
+
+err:
+ i = 0;
+ nla_for_each_nested(attr, attr_filter, rem) {
+ kfree(filter[i].filter);
+ i++;
+ }
+ kfree(filter);
+ return -ENOMEM;
}
static int nl80211_nan_add_func(struct sk_buff *skb,
--
2.34.1
From: Randy Dunlap <[email protected]>
commit 50e06ddceeea263f57fe92baa677c638ecd65bb6 upstream.
__setup() handlers should return 1 on success, i.e., the parameter
has been handled. A return of 0 causes the "option=value" string to be
added to init's environment strings, polluting it.
Fixes: acc18c147b22 ("net: sxgbe: add EEE(Energy Efficient Ethernet) for Samsung sxgbe")
Fixes: 1edb9ca69e8a ("net: sxgbe: add basic framework for Samsung 10Gb ethernet driver")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Link: lore.kernel.org/r/[email protected]
Cc: Siva Reddy <[email protected]>
Cc: Girish K S <[email protected]>
Cc: Byungho An <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
+++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c
@@ -2282,18 +2282,18 @@ static int __init sxgbe_cmdline_opt(char
char *opt;
if (!str || !*str)
- return -EINVAL;
+ return 1;
while ((opt = strsep(&str, ",")) != NULL) {
if (!strncmp(opt, "eee_timer:", 10)) {
if (kstrtoint(opt + 10, 0, &eee_timer))
goto err;
}
}
- return 0;
+ return 1;
err:
pr_err("%s: ERROR broken module parameter conversion\n", __func__);
- return -EINVAL;
+ return 1;
}
__setup("sxgbeeth=", sxgbe_cmdline_opt);
From: Anthoine Bourgeois <[email protected]>
[ Upstream commit 8840f5460a23759403f1f2860429dcbcc2f04a65 ]
Devkit8000 board seems to always used 32k_counter as clocksource.
Restore this behavior.
If clocksource is back to 32k_counter, timer12 is now the clockevent
source (as before) and timer2 is not longer needed here.
This commit fixes the same issue observed with commit 23885389dbbb
("ARM: dts: Fix timer regression for beagleboard revision c") when sleep
is blocked until hitting keys over serial console.
Fixes: aba1ad05da08 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3")
Signed-off-by: Anthoine Bourgeois <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/omap3-devkit8000-common.dtsi | 17 +----------------
drivers/clocksource/timer-ti-dm-systimer.c | 3 +--
2 files changed, 2 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index 0df2b1dd07f6..6883ccb45600 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -158,11 +158,6 @@
status = "disabled";
};
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
- status = "disabled";
-};
-
/* Unusable as clockevent because if unreliable oscillator, allow to idle */
&timer1_target {
/delete-property/ti,no-reset-on-init;
@@ -172,7 +167,7 @@
};
};
-/* Preferred always-on timer for clocksource */
+/* Preferred timer for clockevent */
&timer12_target {
ti,no-reset-on-init;
ti,no-idle;
@@ -181,16 +176,6 @@
};
};
-/* Preferred timer for clockevent */
-&timer2_target {
- ti,no-reset-on-init;
- ti,no-idle;
- timer@0 {
- assigned-clocks = <&gpt2_fck>;
- assigned-clock-parents = <&sys_ck>;
- };
-};
-
&twl_gpio {
ti,use-leds;
/*
diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c
index 5c40ca1d4740..1fccb457fcc5 100644
--- a/drivers/clocksource/timer-ti-dm-systimer.c
+++ b/drivers/clocksource/timer-ti-dm-systimer.c
@@ -241,8 +241,7 @@ static void __init dmtimer_systimer_assign_alwon(void)
bool quirk_unreliable_oscillator = false;
/* Quirk unreliable 32 KiHz oscillator with incomplete dts */
- if (of_machine_is_compatible("ti,omap3-beagle-ab4") ||
- of_machine_is_compatible("timll,omap3-devkit8000")) {
+ if (of_machine_is_compatible("ti,omap3-beagle-ab4")) {
quirk_unreliable_oscillator = true;
counter_32k = -ENODEV;
}
--
2.34.1
From: Christophe JAILLET <[email protected]>
[ Upstream commit b9abe942cda43a1d46a0fd96efb54f1aa909f757 ]
If 'devm_kstrdup()' fails, we should return -ENOMEM.
While at it, move the 'of_node_put()' call in the error handling path and
after the 'machine' has been copied.
Better safe than sorry.
Fixes: a6fc3b698130 ("soc: fsl: add GUTS driver for QorIQ platforms")
Depends-on: fddacc7ff4dd ("soc: fsl: guts: Revert commit 3c0d64e867ed")
Suggested-by: Tyrel Datwyler <[email protected]>
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/fsl/guts.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/fsl/guts.c b/drivers/soc/fsl/guts.c
index 6d7465afd6fd..091e94c04f30 100644
--- a/drivers/soc/fsl/guts.c
+++ b/drivers/soc/fsl/guts.c
@@ -160,9 +160,14 @@ static int fsl_guts_probe(struct platform_device *pdev)
root = of_find_node_by_path("/");
if (of_property_read_string(root, "model", &machine))
of_property_read_string_index(root, "compatible", 0, &machine);
- of_node_put(root);
- if (machine)
+ if (machine) {
soc_dev_attr.machine = devm_kstrdup(dev, machine, GFP_KERNEL);
+ if (!soc_dev_attr.machine) {
+ of_node_put(root);
+ return -ENOMEM;
+ }
+ }
+ of_node_put(root);
svr = fsl_guts_get_svr();
soc_die = fsl_soc_die_match(svr, fsl_soc_die);
--
2.34.1
From: [email protected] <[email protected]>
commit 9995b408f17ff8c7f11bc725c8aa225ba3a63b1c upstream.
There are two reasons for addrconf_notify() to be called with NETDEV_DOWN:
either the network device is actually going down, or IPv6 was disabled
on the interface.
If either of them stays down while the other is toggled, we repeatedly
call the code for NETDEV_DOWN, including ipv6_mc_down(), while never
calling the corresponding ipv6_mc_up() in between. This will cause a
new entry in idev->mc_tomb to be allocated for each multicast group
the interface is subscribed to, which in turn leaks one struct ifmcaddr6
per nontrivial multicast group the interface is subscribed to.
The following reproducer will leak at least $n objects:
ip addr add ff2e::4242/32 dev eth0 autojoin
sysctl -w net.ipv6.conf.eth0.disable_ipv6=1
for i in $(seq 1 $n); do
ip link set up eth0; ip link set down eth0
done
Joining groups with IPV6_ADD_MEMBERSHIP (unprivileged) or setting the
sysctl net.ipv6.conf.eth0.forwarding to 1 (=> subscribing to ff02::2)
can also be used to create a nontrivial idev->mc_list, which will the
leak objects with the right up-down-sequence.
Based on both sources for NETDEV_DOWN events the interface IPv6 state
should be considered:
- not ready if the network interface is not ready OR IPv6 is disabled
for it
- ready if the network interface is ready AND IPv6 is enabled for it
The functions ipv6_mc_up() and ipv6_down() should only be run when this
state changes.
Implement this by remembering when the IPv6 state is ready, and only
run ipv6_mc_down() if it actually changed from ready to not ready.
The other direction (not ready -> ready) already works correctly, as:
- the interface notification triggered codepath for NETDEV_UP /
NETDEV_CHANGE returns early if ipv6 is disabled, and
- the disable_ipv6=0 triggered codepath skips fully initializing the
interface as long as addrconf_link_ready(dev) returns false
- calling ipv6_mc_up() repeatedly does not leak anything
Fixes: 3ce62a84d53c ("ipv6: exit early in addrconf_notify() if IPv6 is disabled")
Signed-off-by: Johannes Nixdorf <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/addrconf.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -3712,6 +3712,7 @@ static int addrconf_ifdown(struct net_de
struct inet6_dev *idev;
struct inet6_ifaddr *ifa, *tmp;
bool keep_addr = false;
+ bool was_ready;
int state, i;
ASSERT_RTNL();
@@ -3777,7 +3778,10 @@ restart:
addrconf_del_rs_timer(idev);
- /* Step 2: clear flags for stateless addrconf */
+ /* Step 2: clear flags for stateless addrconf, repeated down
+ * detection
+ */
+ was_ready = idev->if_flags & IF_READY;
if (!unregister)
idev->if_flags &= ~(IF_RS_SENT|IF_RA_RCVD|IF_READY);
@@ -3851,7 +3855,7 @@ restart:
if (unregister) {
ipv6_ac_destroy_dev(idev);
ipv6_mc_destroy_dev(idev);
- } else {
+ } else if (was_ready) {
ipv6_mc_down(idev);
}
From: Anthoine Bourgeois <[email protected]>
[ Upstream commit 64324ef337d0caa5798fa8fa3f6bbfbd3245868a ]
This patch allow lcd43 and lcd70 flavors to benefit from timer
evolution.
Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3")
Signed-off-by: Anthoine Bourgeois <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../arm/boot/dts/omap3-devkit8000-common.dtsi | 33 +++++++++++++++++++
arch/arm/boot/dts/omap3-devkit8000.dts | 33 -------------------
2 files changed, 33 insertions(+), 33 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index 2c19d6e255bd..0df2b1dd07f6 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -158,6 +158,39 @@
status = "disabled";
};
+/* Unusable as clocksource because of unreliable oscillator */
+&counter32k {
+ status = "disabled";
+};
+
+/* Unusable as clockevent because if unreliable oscillator, allow to idle */
+&timer1_target {
+ /delete-property/ti,no-reset-on-init;
+ /delete-property/ti,no-idle;
+ timer@0 {
+ /delete-property/ti,timer-alwon;
+ };
+};
+
+/* Preferred always-on timer for clocksource */
+&timer12_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ /* Always clocked by secure_32k_fck */
+ };
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+ ti,no-reset-on-init;
+ ti,no-idle;
+ timer@0 {
+ assigned-clocks = <&gpt2_fck>;
+ assigned-clock-parents = <&sys_ck>;
+ };
+};
+
&twl_gpio {
ti,use-leds;
/*
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index c2995a280729..162d0726b008 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -14,36 +14,3 @@
display2 = &tv0;
};
};
-
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
- status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
- /delete-property/ti,no-reset-on-init;
- /delete-property/ti,no-idle;
- timer@0 {
- /delete-property/ti,timer-alwon;
- };
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
- ti,no-reset-on-init;
- ti,no-idle;
- timer@0 {
- /* Always clocked by secure_32k_fck */
- };
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
- ti,no-reset-on-init;
- ti,no-idle;
- timer@0 {
- assigned-clocks = <&gpt2_fck>;
- assigned-clock-parents = <&sys_ck>;
- };
-};
--
2.34.1
From: Hans de Goede <[email protected]>
commit 81a36d8ce554b82b0a08e2b95d0bd44fcbff339b upstream.
elan_disable_power() is called conditionally on suspend, where as
elan_enable_power() is always called on resume. This leads to
an imbalance in the regulator's enable count.
Move the regulator_[en|dis]able() calls out of elan_[en|dis]able_power()
in preparation of fixing this.
No functional changes intended.
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[dtor: consolidate elan_[en|dis]able() into elan_set_power()]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/mouse/elan_i2c_core.c | 62 ++++++++++++------------------------
1 file changed, 22 insertions(+), 40 deletions(-)
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -153,55 +153,21 @@ static int elan_get_fwinfo(u16 ic_type,
return 0;
}
-static int elan_enable_power(struct elan_tp_data *data)
+static int elan_set_power(struct elan_tp_data *data, bool on)
{
int repeat = ETP_RETRY_COUNT;
int error;
- error = regulator_enable(data->vcc);
- if (error) {
- dev_err(&data->client->dev,
- "failed to enable regulator: %d\n", error);
- return error;
- }
-
do {
- error = data->ops->power_control(data->client, true);
+ error = data->ops->power_control(data->client, on);
if (error >= 0)
return 0;
msleep(30);
} while (--repeat > 0);
- dev_err(&data->client->dev, "failed to enable power: %d\n", error);
- return error;
-}
-
-static int elan_disable_power(struct elan_tp_data *data)
-{
- int repeat = ETP_RETRY_COUNT;
- int error;
-
- do {
- error = data->ops->power_control(data->client, false);
- if (!error) {
- error = regulator_disable(data->vcc);
- if (error) {
- dev_err(&data->client->dev,
- "failed to disable regulator: %d\n",
- error);
- /* Attempt to power the chip back up */
- data->ops->power_control(data->client, true);
- break;
- }
-
- return 0;
- }
-
- msleep(30);
- } while (--repeat > 0);
-
- dev_err(&data->client->dev, "failed to disable power: %d\n", error);
+ dev_err(&data->client->dev, "failed to set power %s: %d\n",
+ on ? "on" : "off", error);
return error;
}
@@ -1361,9 +1327,19 @@ static int __maybe_unused elan_suspend(s
/* Enable wake from IRQ */
data->irq_wake = (enable_irq_wake(client->irq) == 0);
} else {
- ret = elan_disable_power(data);
+ ret = elan_set_power(data, false);
+ if (ret)
+ goto err;
+
+ ret = regulator_disable(data->vcc);
+ if (ret) {
+ dev_err(dev, "error %d disabling regulator\n", ret);
+ /* Attempt to power the chip back up */
+ elan_set_power(data, true);
+ }
}
+err:
mutex_unlock(&data->sysfs_mutex);
return ret;
}
@@ -1379,7 +1355,13 @@ static int __maybe_unused elan_resume(st
data->irq_wake = false;
}
- error = elan_enable_power(data);
+ error = regulator_enable(data->vcc);
+ if (error) {
+ dev_err(dev, "error %d enabling regulator\n", error);
+ goto err;
+ }
+
+ error = elan_set_power(data, true);
if (error) {
dev_err(dev, "power up when resuming failed: %d\n", error);
goto err;
From: William Mahon <[email protected]>
commit bfa26ba343c727e055223be04e08f2ebdd43c293 upstream.
Numerous keyboards are adding dictate keys which allows for text
messages to be dictated by a microphone.
This patch adds a new key definition KEY_DICTATE and maps 0x0c/0x0d8
usage code to this new keycode. Additionally hid-debug is adjusted to
recognize this new usage code as well.
Signed-off-by: William Mahon <[email protected]>
Acked-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/20220303021501.1.I5dbf50eb1a7a6734ee727bda4a8573358c6d3ec0@changeid
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/hid-debug.c | 1 +
drivers/hid/hid-input.c | 1 +
include/uapi/linux/input-event-codes.h | 1 +
3 files changed, 3 insertions(+)
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -930,6 +930,7 @@ static const char *keys[KEY_MAX + 1] = {
[KEY_SCREENSAVER] = "ScreenSaver",
[KEY_VOICECOMMAND] = "VoiceCommand",
[KEY_EMOJI_PICKER] = "EmojiPicker",
+ [KEY_DICTATE] = "Dictate",
[KEY_BRIGHTNESS_MIN] = "BrightnessMin",
[KEY_BRIGHTNESS_MAX] = "BrightnessMax",
[KEY_BRIGHTNESS_AUTO] = "BrightnessAuto",
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -956,6 +956,7 @@ static void hidinput_configure_usage(str
case 0x0cd: map_key_clear(KEY_PLAYPAUSE); break;
case 0x0cf: map_key_clear(KEY_VOICECOMMAND); break;
+ case 0x0d8: map_key_clear(KEY_DICTATE); break;
case 0x0d9: map_key_clear(KEY_EMOJI_PICKER); break;
case 0x0e0: map_abs_clear(ABS_VOLUME); break;
--- a/include/uapi/linux/input-event-codes.h
+++ b/include/uapi/linux/input-event-codes.h
@@ -612,6 +612,7 @@
#define KEY_ASSISTANT 0x247 /* AL Context-aware desktop assistant */
#define KEY_KBD_LAYOUT_NEXT 0x248 /* AC Next Keyboard Layout Select */
#define KEY_EMOJI_PICKER 0x249 /* Show/hide emoji picker (HUTRR101) */
+#define KEY_DICTATE 0x24a /* Start or Stop Voice Dictation Session (HUTRR99) */
#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */
#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */
From: William Mahon <[email protected]>
commit 327b89f0acc4c20a06ed59e4d9af7f6d804dc2e2 upstream.
This patch adds a new key definition for KEY_ALL_APPLICATIONS
and aliases KEY_DASHBOARD to it.
It also maps the 0x0c/0x2a2 usage code to KEY_ALL_APPLICATIONS.
Signed-off-by: William Mahon <[email protected]>
Acked-by: Benjamin Tissoires <[email protected]>
Link: https://lore.kernel.org/r/20220303035618.1.I3a7746ad05d270161a18334ae06e3b6db1a1d339@changeid
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/hid-debug.c | 4 +++-
drivers/hid/hid-input.c | 2 ++
include/uapi/linux/input-event-codes.h | 3 ++-
3 files changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -823,7 +823,9 @@ static const char *keys[KEY_MAX + 1] = {
[KEY_F22] = "F22", [KEY_F23] = "F23",
[KEY_F24] = "F24", [KEY_PLAYCD] = "PlayCD",
[KEY_PAUSECD] = "PauseCD", [KEY_PROG3] = "Prog3",
- [KEY_PROG4] = "Prog4", [KEY_SUSPEND] = "Suspend",
+ [KEY_PROG4] = "Prog4",
+ [KEY_ALL_APPLICATIONS] = "AllApplications",
+ [KEY_SUSPEND] = "Suspend",
[KEY_CLOSE] = "Close", [KEY_PLAY] = "Play",
[KEY_FASTFORWARD] = "FastForward", [KEY_BASSBOOST] = "BassBoost",
[KEY_PRINT] = "Print", [KEY_HP] = "HP",
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -1048,6 +1048,8 @@ static void hidinput_configure_usage(str
case 0x29d: map_key_clear(KEY_KBD_LAYOUT_NEXT); break;
+ case 0x2a2: map_key_clear(KEY_ALL_APPLICATIONS); break;
+
case 0x2c7: map_key_clear(KEY_KBDINPUTASSIST_PREV); break;
case 0x2c8: map_key_clear(KEY_KBDINPUTASSIST_NEXT); break;
case 0x2c9: map_key_clear(KEY_KBDINPUTASSIST_PREVGROUP); break;
--- a/include/uapi/linux/input-event-codes.h
+++ b/include/uapi/linux/input-event-codes.h
@@ -278,7 +278,8 @@
#define KEY_PAUSECD 201
#define KEY_PROG3 202
#define KEY_PROG4 203
-#define KEY_DASHBOARD 204 /* AL Dashboard */
+#define KEY_ALL_APPLICATIONS 204 /* AC Desktop Show All Applications */
+#define KEY_DASHBOARD KEY_ALL_APPLICATIONS
#define KEY_SUSPEND 205
#define KEY_CLOSE 206 /* AC Close */
#define KEY_PLAY 207
From: Sukadev Bhattiprolu <[email protected]>
[ Upstream commit 83da53f7e4bd86dca4b2edc1e2bb324fb3c033a1 ]
Define and use a helper to flush the reset queue.
Fixes: 2770a7984db5 ("ibmvnic: Introduce hard reset recovery")
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ibm/ibmvnic.c | 24 ++++++++++++++++--------
1 file changed, 16 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index de58824f4c18..f07468316656 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -2304,12 +2304,23 @@ static void __ibmvnic_delayed_reset(struct work_struct *work)
__ibmvnic_reset(&adapter->ibmvnic_reset);
}
+static void flush_reset_queue(struct ibmvnic_adapter *adapter)
+{
+ struct list_head *entry, *tmp_entry;
+
+ if (!list_empty(&adapter->rwi_list)) {
+ list_for_each_safe(entry, tmp_entry, &adapter->rwi_list) {
+ list_del(entry);
+ kfree(list_entry(entry, struct ibmvnic_rwi, list));
+ }
+ }
+}
+
static int ibmvnic_reset(struct ibmvnic_adapter *adapter,
enum ibmvnic_reset_reason reason)
{
- struct list_head *entry, *tmp_entry;
- struct ibmvnic_rwi *rwi, *tmp;
struct net_device *netdev = adapter->netdev;
+ struct ibmvnic_rwi *rwi, *tmp;
unsigned long flags;
int ret;
@@ -2353,12 +2364,9 @@ static int ibmvnic_reset(struct ibmvnic_adapter *adapter,
/* if we just received a transport event,
* flush reset queue and process this reset
*/
- if (adapter->force_reset_recovery && !list_empty(&adapter->rwi_list)) {
- list_for_each_safe(entry, tmp_entry, &adapter->rwi_list) {
- list_del(entry);
- kfree(list_entry(entry, struct ibmvnic_rwi, list));
- }
- }
+ if (adapter->force_reset_recovery)
+ flush_reset_queue(adapter);
+
rwi->reset_reason = reason;
list_add_tail(&rwi->list, &adapter->rwi_list);
netdev_dbg(adapter->netdev, "Scheduling reset (reason %d)\n", reason);
--
2.34.1
From: Randy Dunlap <[email protected]>
commit 1d02b444b8d1345ea4708db3bab4db89a7784b55 upstream.
__setup() handlers should generally return 1 to indicate that the
boot options have been handled.
Using invalid option values causes the entire kernel boot option
string to be reported as Unknown and added to init's environment
strings, polluting it.
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc6
kprobe_event=p,syscall_any,$arg1 trace_options=quiet
trace_clock=jiffies", will be passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc6
kprobe_event=p,syscall_any,$arg1
trace_options=quiet
trace_clock=jiffies
Return 1 from the __setup() handlers so that init's environment is not
polluted with kernel boot options.
Link: lore.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: 7bcfaf54f591 ("tracing: Add trace_options kernel command line parameter")
Fixes: e1e232ca6b8f ("tracing: Add trace_clock=<clock> kernel parameter")
Fixes: 970988e19eb0 ("tracing/kprobe: Add kprobe_event= boot parameter")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace.c | 4 ++--
kernel/trace/trace_kprobe.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -233,7 +233,7 @@ static char trace_boot_options_buf[MAX_T
static int __init set_trace_boot_options(char *str)
{
strlcpy(trace_boot_options_buf, str, MAX_TRACER_SIZE);
- return 0;
+ return 1;
}
__setup("trace_options=", set_trace_boot_options);
@@ -244,7 +244,7 @@ static int __init set_trace_boot_clock(c
{
strlcpy(trace_boot_clock_buf, str, MAX_TRACER_SIZE);
trace_boot_clock = trace_boot_clock_buf;
- return 0;
+ return 1;
}
__setup("trace_clock=", set_trace_boot_clock);
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -31,7 +31,7 @@ static int __init set_kprobe_boot_events
strlcpy(kprobe_boot_events_buf, str, COMMAND_LINE_SIZE);
disable_tracing_selftest("running kprobe events");
- return 0;
+ return 1;
}
__setup("kprobe_event=", set_kprobe_boot_events);
From: Thierry Reding <[email protected]>
[ Upstream commit 8d3b01e0d4bb54368d73d0984466d72c2eeeac74 ]
Move the eDP panel on Venice 2 and Nyan boards into the corresponding
AUX bus device tree node. This allows us to avoid a nasty circular
dependency that would otherwise be created between the DPAUX and panel
nodes via the DDC/I2C phandle.
Fixes: eb481f9ac95c ("ARM: tegra: add Acer Chromebook 13 device tree")
Fixes: 59fe02cb079f ("ARM: tegra: Add DTS for the nyan-blaze board")
Fixes: 40e231c770a4 ("ARM: tegra: Enable eDP for Venice2")
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/tegra124-nyan-big.dts | 15 +++++++++------
arch/arm/boot/dts/tegra124-nyan-blaze.dts | 15 +++++++++------
arch/arm/boot/dts/tegra124-venice2.dts | 14 +++++++-------
3 files changed, 25 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts
index 1d2aac2cb6d0..fdc1d64dfff9 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big.dts
+++ b/arch/arm/boot/dts/tegra124-nyan-big.dts
@@ -13,12 +13,15 @@
"google,nyan-big-rev1", "google,nyan-big-rev0",
"google,nyan-big", "google,nyan", "nvidia,tegra124";
- panel: panel {
- compatible = "auo,b133xtn01";
-
- power-supply = <&vdd_3v3_panel>;
- backlight = <&backlight>;
- ddc-i2c-bus = <&dpaux>;
+ host1x@50000000 {
+ dpaux@545c0000 {
+ aux-bus {
+ panel: panel {
+ compatible = "auo,b133xtn01";
+ backlight = <&backlight>;
+ };
+ };
+ };
};
mmc@700b0400 { /* SD Card on this bus */
diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze.dts b/arch/arm/boot/dts/tegra124-nyan-blaze.dts
index 677babde6460..abdf4456826f 100644
--- a/arch/arm/boot/dts/tegra124-nyan-blaze.dts
+++ b/arch/arm/boot/dts/tegra124-nyan-blaze.dts
@@ -15,12 +15,15 @@
"google,nyan-blaze-rev0", "google,nyan-blaze",
"google,nyan", "nvidia,tegra124";
- panel: panel {
- compatible = "samsung,ltn140at29-301";
-
- power-supply = <&vdd_3v3_panel>;
- backlight = <&backlight>;
- ddc-i2c-bus = <&dpaux>;
+ host1x@50000000 {
+ dpaux@545c0000 {
+ aux-bus {
+ panel: panel {
+ compatible = "samsung,ltn140at29-301";
+ backlight = <&backlight>;
+ };
+ };
+ };
};
sound {
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index e6b54ac1ebd1..84e2d24065e9 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -48,6 +48,13 @@
dpaux@545c0000 {
vdd-supply = <&vdd_3v3_panel>;
status = "okay";
+
+ aux-bus {
+ panel: panel {
+ compatible = "lg,lp129qe";
+ backlight = <&backlight>;
+ };
+ };
};
};
@@ -1079,13 +1086,6 @@
};
};
- panel: panel {
- compatible = "lg,lp129qe";
- power-supply = <&vdd_3v3_panel>;
- backlight = <&backlight>;
- ddc-i2c-bus = <&dpaux>;
- };
-
vdd_mux: regulator@0 {
compatible = "regulator-fixed";
regulator-name = "+VDD_MUX";
--
2.34.1
From: Fabio Estevam <[email protected]>
commit c5487b9cdea5c1ede38a7ec94db0fc59963c8e86 upstream.
Currently, the following error messages are seen during boot:
asoc-simple-card sound: control 2:0:0:SPDIF Switch:0 is already present
cs4265 1-004f: ASoC: failed to add widget SPDIF dapm kcontrol SPDIF Switch: -16
Quoting Mark Brown:
"The driver is just plain buggy, it defines both a regular SPIDF Switch
control and a SND_SOC_DAPM_SWITCH() called SPDIF both of which will
create an identically named control, it can never have loaded without
error. One or both of those has to be renamed or they need to be
merged into one thing."
Fix the duplicated control name by combining the two SPDIF controls here
and move the register bits onto the DAPM widget and have DAPM control them.
Fixes: f853d6b3ba34 ("ASoC: cs4265: Add a S/PDIF enable switch")
Signed-off-by: Fabio Estevam <[email protected]>
Acked-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/codecs/cs4265.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/sound/soc/codecs/cs4265.c
+++ b/sound/soc/codecs/cs4265.c
@@ -150,7 +150,6 @@ static const struct snd_kcontrol_new cs4
SOC_SINGLE("E to F Buffer Disable Switch", CS4265_SPDIF_CTL1,
6, 1, 0),
SOC_ENUM("C Data Access", cam_mode_enum),
- SOC_SINGLE("SPDIF Switch", CS4265_SPDIF_CTL2, 5, 1, 1),
SOC_SINGLE("Validity Bit Control Switch", CS4265_SPDIF_CTL2,
3, 1, 0),
SOC_ENUM("SPDIF Mono/Stereo", spdif_mono_stereo_enum),
@@ -186,7 +185,7 @@ static const struct snd_soc_dapm_widget
SND_SOC_DAPM_SWITCH("Loopback", SND_SOC_NOPM, 0, 0,
&loopback_ctl),
- SND_SOC_DAPM_SWITCH("SPDIF", SND_SOC_NOPM, 0, 0,
+ SND_SOC_DAPM_SWITCH("SPDIF", CS4265_SPDIF_CTL2, 5, 1,
&spdif_switch),
SND_SOC_DAPM_SWITCH("DAC", CS4265_PWRCTL, 1, 1,
&dac_switch),
From: Slawomir Laba <[email protected]>
commit d2c0f45fcceb0995f208c441d9c9a453623f9ccf upstream.
The driver was queueing reset_task regardless of the netdev
state.
Do not queue the reset task in iavf_change_mtu if netdev
is not running.
Fixes: fdd4044ffdc8 ("iavf: Remove timer for work triggering, use delaying work instead")
Signed-off-by: Slawomir Laba <[email protected]>
Signed-off-by: Phani Burra <[email protected]>
Signed-off-by: Jacob Keller <[email protected]>
Signed-off-by: Mateusz Palczewski <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/intel/iavf/iavf_main.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -3317,8 +3317,11 @@ static int iavf_change_mtu(struct net_de
iavf_notify_client_l2_params(&adapter->vsi);
adapter->flags |= IAVF_FLAG_SERVICE_CLIENT_REQUESTED;
}
- adapter->flags |= IAVF_FLAG_RESET_NEEDED;
- queue_work(iavf_wq, &adapter->reset_task);
+
+ if (netif_running(netdev)) {
+ adapter->flags |= IAVF_FLAG_RESET_NEEDED;
+ queue_work(iavf_wq, &adapter->reset_task);
+ }
return 0;
}
From: Antony Antony <[email protected]>
commit 6d0d95a1c2b07270870e7be16575c513c29af3f1 upstream.
if_id will be always 0, because it was not yet initialized.
Fixes: 8dce43919566 ("xfrm: interface with if_id 0 should return error")
Reported-by: Pavel Machek <[email protected]>
Signed-off-by: Antony Antony <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/xfrm/xfrm_interface.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/xfrm/xfrm_interface.c
+++ b/net/xfrm/xfrm_interface.c
@@ -679,12 +679,12 @@ static int xfrmi_changelink(struct net_d
struct net *net = xi->net;
struct xfrm_if_parms p = {};
+ xfrmi_netlink_parms(data, &p);
if (!p.if_id) {
NL_SET_ERR_MSG(extack, "if_id must be non zero");
return -EINVAL;
}
- xfrmi_netlink_parms(data, &p);
xi = xfrmi_locate(net, &p);
if (!xi) {
xi = netdev_priv(dev);
From: Zheyu Ma <[email protected]>
commit bd6f1fd5d33dfe5d1b4f2502d3694a7cc13f166d upstream.
During driver initialization, the pointer of card info, i.e. the
variable 'ci' is required. However, the definition of
'com20020pci_id_table' reveals that this field is empty for some
devices, which will cause null pointer dereference when initializing
these devices.
The following log reveals it:
[ 3.973806] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[ 3.973819] RIP: 0010:com20020pci_probe+0x18d/0x13e0 [com20020_pci]
[ 3.975181] Call Trace:
[ 3.976208] local_pci_probe+0x13f/0x210
[ 3.977248] pci_device_probe+0x34c/0x6d0
[ 3.977255] ? pci_uevent+0x470/0x470
[ 3.978265] really_probe+0x24c/0x8d0
[ 3.978273] __driver_probe_device+0x1b3/0x280
[ 3.979288] driver_probe_device+0x50/0x370
Fix this by checking whether the 'ci' is a null pointer first.
Fixes: 8c14f9c70327 ("ARCNET: add com20020 PCI IDs with metadata")
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/arcnet/com20020-pci.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/net/arcnet/com20020-pci.c
+++ b/drivers/net/arcnet/com20020-pci.c
@@ -136,6 +136,9 @@ static int com20020pci_probe(struct pci_
return -ENOMEM;
ci = (struct com20020_pci_card_info *)id->driver_data;
+ if (!ci)
+ return -EINVAL;
+
priv->ci = ci;
mm = &ci->misc_map;
From: Filipe Manana <[email protected]>
commit 4751dc99627e4d1465c5bfa8cb7ab31ed418eff5 upstream.
During log replay, whenever we need to check if a name (dentry) exists in
a directory we do searches on the subvolume tree for inode references or
or directory entries (BTRFS_DIR_INDEX_KEY keys, and BTRFS_DIR_ITEM_KEY
keys as well, before kernel 5.17). However when during log replay we
unlink a name, through btrfs_unlink_inode(), we may not delete inode
references and dir index keys from a subvolume tree and instead just add
the deletions to the delayed inode's delayed items, which will only be
run when we commit the transaction used for log replay. This means that
after an unlink operation during log replay, if we attempt to search for
the same name during log replay, we will not see that the name was already
deleted, since the deletion is recorded only on the delayed items.
We run delayed items after every unlink operation during log replay,
except at unlink_old_inode_refs() and at add_inode_ref(). This was due
to an overlook, as delayed items should be run after evert unlink, for
the reasons stated above.
So fix those two cases.
Fixes: 0d836392cadd5 ("Btrfs: fix mount failure after fsync due to hard link recreation")
Fixes: 1f250e929a9c9 ("Btrfs: fix log replay failure after unlink and link combination")
CC: [email protected] # 4.19+
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/tree-log.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -1286,6 +1286,15 @@ again:
inode, name, namelen);
kfree(name);
iput(dir);
+ /*
+ * Whenever we need to check if a name exists or not, we
+ * check the subvolume tree. So after an unlink we must
+ * run delayed items, so that future checks for a name
+ * during log replay see that the name does not exists
+ * anymore.
+ */
+ if (!ret)
+ ret = btrfs_run_delayed_items(trans);
if (ret)
goto out;
goto again;
@@ -1537,6 +1546,15 @@ static noinline int add_inode_ref(struct
*/
if (!ret && inode->i_nlink == 0)
inc_nlink(inode);
+ /*
+ * Whenever we need to check if a name exists or
+ * not, we check the subvolume tree. So after an
+ * unlink we must run delayed items, so that future
+ * checks for a name during log replay see that the
+ * name does not exists anymore.
+ */
+ if (!ret)
+ ret = btrfs_run_delayed_items(trans);
}
if (ret < 0)
goto out;
From: Brett Creeley <[email protected]>
commit e6ba5273d4ede03d075d7a116b8edad1f6115f4d upstream.
The VF can be configured via the PF's ndo ops at the same time the PF is
receiving/handling virtchnl messages. This has many issues, with
one of them being the ndo op could be actively resetting a VF (i.e.
resetting it to the default state and deleting/re-adding the VF's VSI)
while a virtchnl message is being handled. The following error was seen
because a VF ndo op was used to change a VF's trust setting while the
VIRTCHNL_OP_CONFIG_VSI_QUEUES was ongoing:
[35274.192484] ice 0000:88:00.0: Failed to set LAN Tx queue context, error: ICE_ERR_PARAM
[35274.193074] ice 0000:88:00.0: VF 0 failed opcode 6, retval: -5
[35274.193640] iavf 0000:88:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 6
Fix this by making sure the virtchnl handling and VF ndo ops that
trigger VF resets cannot run concurrently. This is done by adding a
struct mutex cfg_lock to each VF structure. For VF ndo ops, the mutex
will be locked around the critical operations and VFR. Since the ndo ops
will trigger a VFR, the virtchnl thread will use mutex_trylock(). This
is done because if any other thread (i.e. VF ndo op) has the mutex, then
that means the current VF message being handled is no longer valid, so
just ignore it.
This issue can be seen using the following commands:
for i in {0..50}; do
rmmod ice
modprobe ice
sleep 1
echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs
echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs
ip link set ens785f1 vf 0 trust on
ip link set ens785f0 vf 0 trust on
sleep 2
echo 0 > /sys/class/net/ens785f0/device/sriov_numvfs
echo 0 > /sys/class/net/ens785f1/device/sriov_numvfs
sleep 1
echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs
echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs
ip link set ens785f1 vf 0 trust on
ip link set ens785f0 vf 0 trust on
done
Fixes: 7c710869d64e ("ice: Add handlers for VF netdevice operations")
Signed-off-by: Brett Creeley <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Jacob Keller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 25 +++++++++++++++++++++++
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h | 5 ++++
2 files changed, 30 insertions(+)
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -374,6 +374,8 @@ void ice_free_vfs(struct ice_pf *pf)
set_bit(ICE_VF_STATE_DIS, pf->vf[i].vf_states);
ice_free_vf_res(&pf->vf[i]);
}
+
+ mutex_destroy(&pf->vf[i].cfg_lock);
}
if (ice_sriov_free_msix_res(pf))
@@ -1518,6 +1520,8 @@ static void ice_set_dflt_settings_vfs(st
set_bit(ICE_VIRTCHNL_VF_CAP_L2, &vf->vf_caps);
vf->spoofchk = true;
vf->num_vf_qs = pf->num_qps_per_vf;
+
+ mutex_init(&vf->cfg_lock);
}
}
@@ -3345,6 +3349,8 @@ ice_set_vf_port_vlan(struct net_device *
return 0;
}
+ mutex_lock(&vf->cfg_lock);
+
vf->port_vlan_info = vlanprio;
if (vf->port_vlan_info)
@@ -3354,6 +3360,7 @@ ice_set_vf_port_vlan(struct net_device *
dev_info(dev, "Clearing port VLAN on VF %d\n", vf_id);
ice_vc_reset_vf(vf);
+ mutex_unlock(&vf->cfg_lock);
return 0;
}
@@ -3719,6 +3726,15 @@ error_handler:
return;
}
+ /* VF is being configured in another context that triggers a VFR, so no
+ * need to process this message
+ */
+ if (!mutex_trylock(&vf->cfg_lock)) {
+ dev_info(dev, "VF %u is being configured in another context that will trigger a VFR, so there is no need to handle this message\n",
+ vf->vf_id);
+ return;
+ }
+
switch (v_opcode) {
case VIRTCHNL_OP_VERSION:
err = ice_vc_get_ver_msg(vf, msg);
@@ -3795,6 +3811,8 @@ error_handler:
dev_info(dev, "PF failed to honor VF %d, opcode %d, error %d\n",
vf_id, v_opcode, err);
}
+
+ mutex_unlock(&vf->cfg_lock);
}
/**
@@ -3909,6 +3927,8 @@ int ice_set_vf_mac(struct net_device *ne
return -EINVAL;
}
+ mutex_lock(&vf->cfg_lock);
+
/* VF is notified of its new MAC via the PF's response to the
* VIRTCHNL_OP_GET_VF_RESOURCES message after the VF has been reset
*/
@@ -3926,6 +3946,7 @@ int ice_set_vf_mac(struct net_device *ne
}
ice_vc_reset_vf(vf);
+ mutex_unlock(&vf->cfg_lock);
return 0;
}
@@ -3955,11 +3976,15 @@ int ice_set_vf_trust(struct net_device *
if (trusted == vf->trusted)
return 0;
+ mutex_lock(&vf->cfg_lock);
+
vf->trusted = trusted;
ice_vc_reset_vf(vf);
dev_info(ice_pf_to_dev(pf), "VF %u is now %strusted\n",
vf_id, trusted ? "" : "un");
+ mutex_unlock(&vf->cfg_lock);
+
return 0;
}
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h
@@ -68,6 +68,11 @@ struct ice_mdd_vf_events {
struct ice_vf {
struct ice_pf *pf;
+ /* Used during virtchnl message handling and NDO ops against the VF
+ * that will trigger a VFR
+ */
+ struct mutex cfg_lock;
+
u16 vf_id; /* VF ID in the PF space */
u16 lan_vsi_idx; /* index into PF struct */
/* first vector index of this VF in the PF space */
From: Qiang Yu <[email protected]>
[ Upstream commit f1ef17011c765495c876fa75435e59eecfdc1ee4 ]
Regression has been reported that suspend/resume may hang with
the previous vm ready check commit.
So bring back the evicted list check as a temp fix.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1922
Fixes: c1a66c3bc425 ("drm/amdgpu: check vm ready by amdgpu_vm->evicting flag")
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Qiang Yu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
index 47cc038d7d50..635601d8b131 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
@@ -724,7 +724,8 @@ bool amdgpu_vm_ready(struct amdgpu_vm *vm)
amdgpu_vm_eviction_lock(vm);
ret = !vm->evicting;
amdgpu_vm_eviction_unlock(vm);
- return ret;
+
+ return ret && list_empty(&vm->evicted);
}
/**
--
2.34.1
From: Sven Eckelmann <[email protected]>
commit 690bb6fb64f5dc7437317153902573ecad67593d upstream.
There is no need to call dev_get_iflink multiple times for the same
net_device in batadv_is_on_batman_iface. And since some of the
.ndo_get_iflink callbacks are dynamic (for example via RCUs like in
vxcan_get_iflink), it could easily happen that the returned values are not
stable. The pre-checks before __dev_get_by_index are then of course bogus.
Fixes: b7eddd0b3950 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface")
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/batman-adv/hard-interface.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/net/batman-adv/hard-interface.c
+++ b/net/batman-adv/hard-interface.c
@@ -151,22 +151,23 @@ static bool batadv_is_on_batman_iface(co
struct net *net = dev_net(net_dev);
struct net_device *parent_dev;
struct net *parent_net;
+ int iflink;
bool ret;
/* check if this is a batman-adv mesh interface */
if (batadv_softif_is_valid(net_dev))
return true;
+ iflink = dev_get_iflink(net_dev);
+
/* no more parents..stop recursion */
- if (dev_get_iflink(net_dev) == 0 ||
- dev_get_iflink(net_dev) == net_dev->ifindex)
+ if (iflink == 0 || iflink == net_dev->ifindex)
return false;
parent_net = batadv_getlink_net(net_dev, net);
/* recurse over the parent device */
- parent_dev = __dev_get_by_index((struct net *)parent_net,
- dev_get_iflink(net_dev));
+ parent_dev = __dev_get_by_index((struct net *)parent_net, iflink);
/* if we got a NULL parent_dev there is something broken.. */
if (!parent_dev) {
pr_err("Cannot find parent device\n");
From: Sukadev Bhattiprolu <[email protected]>
[ Upstream commit 36491f2df9ad2501e5a4ec25d3d95d72bafd2781 ]
If we get a transport event, set the error and mark the init as
complete so the attempt to send crq-init or login fail sooner
rather than wait for the timeout.
Fixes: bbd669a868bb ("ibmvnic: Fix completion structure initialization")
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/ibm/ibmvnic.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index f07468316656..1afb31c9ed7b 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -4931,6 +4931,13 @@ static void ibmvnic_handle_crq(union ibmvnic_crq *crq,
adapter->fw_done_rc = -EIO;
complete(&adapter->fw_done);
}
+
+ /* if we got here during crq-init, retry crq-init */
+ if (!completion_done(&adapter->init_done)) {
+ adapter->init_done_rc = -EAGAIN;
+ complete(&adapter->init_done);
+ }
+
if (!completion_done(&adapter->stats_done))
complete(&adapter->stats_done);
if (test_bit(0, &adapter->resetting))
--
2.34.1
From: Steven Rostedt (Google) <[email protected]>
commit 1d1898f65616c4601208963c3376c1d828cbf2c7 upstream.
When trying to add a histogram against an event with the "cpu" field, it
was impossible due to "cpu" being a keyword to key off of the running CPU.
So to fix this, it was changed to "common_cpu" to match the other generic
fields (like "common_pid"). But since some scripts used "cpu" for keying
off of the CPU (for events that did not have "cpu" as a field, which is
most of them), a backward compatibility trick was added such that if "cpu"
was used as a key, and the event did not have "cpu" as a field name, then
it would fallback and switch over to "common_cpu".
This fix has a couple of subtle bugs. One was that when switching over to
"common_cpu", it did not change the field name, it just set a flag. But
the code still found a "cpu" field. The "cpu" field is used for filtering
and is returned when the event does not have a "cpu" field.
This was found by:
# cd /sys/kernel/tracing
# echo hist:key=cpu,pid:sort=cpu > events/sched/sched_wakeup/trigger
# cat events/sched/sched_wakeup/hist
Which showed the histogram unsorted:
{ cpu: 19, pid: 1175 } hitcount: 1
{ cpu: 6, pid: 239 } hitcount: 2
{ cpu: 23, pid: 1186 } hitcount: 14
{ cpu: 12, pid: 249 } hitcount: 2
{ cpu: 3, pid: 994 } hitcount: 5
Instead of hard coding the "cpu" checks, take advantage of the fact that
trace_event_field_field() returns a special field for "cpu" and "CPU" if
the event does not have "cpu" as a field. This special field has the
"filter_type" of "FILTER_CPU". Check that to test if the returned field is
of the CPU type instead of doing the string compare.
Also, fix the sorting bug by testing for the hist_field flag of
HIST_FIELD_FL_CPU when setting up the sort routine. Otherwise it will use
the special CPU field to know what compare routine to use, and since that
special field does not have a size, it returns tracing_map_cmp_none.
Cc: [email protected]
Fixes: 1e3bac71c505 ("tracing/histogram: Rename "cpu" to "common_cpu"")
Reported-by: Daniel Bristot de Oliveira <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/trace/trace_events_hist.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/kernel/trace/trace_events_hist.c
+++ b/kernel/trace/trace_events_hist.c
@@ -1985,9 +1985,9 @@ parse_field(struct hist_trigger_data *hi
/*
* For backward compatibility, if field_name
* was "cpu", then we treat this the same as
- * common_cpu.
+ * common_cpu. This also works for "CPU".
*/
- if (strcmp(field_name, "cpu") == 0) {
+ if (field && field->filter_type == FILTER_CPU) {
*flags |= HIST_FIELD_FL_CPU;
} else {
hist_err(tr, HIST_ERR_FIELD_NOT_FOUND,
@@ -4365,7 +4365,7 @@ static int create_tracing_map_fields(str
if (hist_field->flags & HIST_FIELD_FL_STACKTRACE)
cmp_fn = tracing_map_cmp_none;
- else if (!field)
+ else if (!field || hist_field->flags & HIST_FIELD_FL_CPU)
cmp_fn = tracing_map_cmp_num(hist_field->size,
hist_field->is_signed);
else if (is_string_field(field))
From: D. Wythe <[email protected]>
commit 0537f0a2151375dcf90c1bbfda6a0aaf57164e89 upstream.
The main reason for this unexpected SMC_CLC_DECL_ERR_REGRMB in client
dues to following execution sequence:
Server Conn A: Server Conn B: Client Conn B:
smc_lgr_unregister_conn
smc_lgr_register_conn
smc_clc_send_accept ->
smc_rtoken_add
smcr_buf_unuse
-> Client Conn A:
smc_rtoken_delete
smc_lgr_unregister_conn() makes current link available to assigned to new
incoming connection, while smcr_buf_unuse() has not executed yet, which
means that smc_rtoken_add may fail because of insufficient rtoken_entry,
reversing their execution order will avoid this problem.
Fixes: 3e034725c0d8 ("net/smc: common functions for RMBs and send buffers")
Signed-off-by: D. Wythe <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/smc/smc_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/smc/smc_core.c
+++ b/net/smc/smc_core.c
@@ -662,8 +662,8 @@ void smc_conn_free(struct smc_connection
cancel_work_sync(&conn->abort_work);
}
if (!list_empty(&lgr->list)) {
- smc_lgr_unregister_conn(conn);
smc_buf_unuse(conn, lgr); /* allow buffer reuse */
+ smc_lgr_unregister_conn(conn);
}
if (!lgr->conns_num)
From: Russell King (Oracle) <[email protected]>
commit d920eaa4c4559f59be7b4c2d26fa0a2e1aaa3da9 upstream.
The kgdb code needs to register an undef hook for the Thumb UDF
instruction that will fault in order to be functional on Thumb2
platforms.
Reported-by: Johannes Stezenbach <[email protected]>
Tested-by: Johannes Stezenbach <[email protected]>
Fixes: 5cbad0ebf45c ("kgdb: support for ARCH=arm")
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/kernel/kgdb.c | 36 ++++++++++++++++++++++++++++--------
1 file changed, 28 insertions(+), 8 deletions(-)
--- a/arch/arm/kernel/kgdb.c
+++ b/arch/arm/kernel/kgdb.c
@@ -154,22 +154,38 @@ static int kgdb_compiled_brk_fn(struct p
return 0;
}
-static struct undef_hook kgdb_brkpt_hook = {
+static struct undef_hook kgdb_brkpt_arm_hook = {
.instr_mask = 0xffffffff,
.instr_val = KGDB_BREAKINST,
- .cpsr_mask = MODE_MASK,
+ .cpsr_mask = PSR_T_BIT | MODE_MASK,
.cpsr_val = SVC_MODE,
.fn = kgdb_brk_fn
};
-static struct undef_hook kgdb_compiled_brkpt_hook = {
+static struct undef_hook kgdb_brkpt_thumb_hook = {
+ .instr_mask = 0xffff,
+ .instr_val = KGDB_BREAKINST & 0xffff,
+ .cpsr_mask = PSR_T_BIT | MODE_MASK,
+ .cpsr_val = PSR_T_BIT | SVC_MODE,
+ .fn = kgdb_brk_fn
+};
+
+static struct undef_hook kgdb_compiled_brkpt_arm_hook = {
.instr_mask = 0xffffffff,
.instr_val = KGDB_COMPILED_BREAK,
- .cpsr_mask = MODE_MASK,
+ .cpsr_mask = PSR_T_BIT | MODE_MASK,
.cpsr_val = SVC_MODE,
.fn = kgdb_compiled_brk_fn
};
+static struct undef_hook kgdb_compiled_brkpt_thumb_hook = {
+ .instr_mask = 0xffff,
+ .instr_val = KGDB_COMPILED_BREAK & 0xffff,
+ .cpsr_mask = PSR_T_BIT | MODE_MASK,
+ .cpsr_val = PSR_T_BIT | SVC_MODE,
+ .fn = kgdb_compiled_brk_fn
+};
+
static int __kgdb_notify(struct die_args *args, unsigned long cmd)
{
struct pt_regs *regs = args->regs;
@@ -210,8 +226,10 @@ int kgdb_arch_init(void)
if (ret != 0)
return ret;
- register_undef_hook(&kgdb_brkpt_hook);
- register_undef_hook(&kgdb_compiled_brkpt_hook);
+ register_undef_hook(&kgdb_brkpt_arm_hook);
+ register_undef_hook(&kgdb_brkpt_thumb_hook);
+ register_undef_hook(&kgdb_compiled_brkpt_arm_hook);
+ register_undef_hook(&kgdb_compiled_brkpt_thumb_hook);
return 0;
}
@@ -224,8 +242,10 @@ int kgdb_arch_init(void)
*/
void kgdb_arch_exit(void)
{
- unregister_undef_hook(&kgdb_brkpt_hook);
- unregister_undef_hook(&kgdb_compiled_brkpt_hook);
+ unregister_undef_hook(&kgdb_brkpt_arm_hook);
+ unregister_undef_hook(&kgdb_brkpt_thumb_hook);
+ unregister_undef_hook(&kgdb_compiled_brkpt_arm_hook);
+ unregister_undef_hook(&kgdb_compiled_brkpt_thumb_hook);
unregister_die_notifier(&kgdb_notifier);
}
From: Steven Rostedt <[email protected]>
[ Upstream commit f37c3bbc635994eda203a6da4ba0f9d05165a8d6 ]
Since referencing user space pointers is special, if the user wants to
filter on a field that is a pointer to user space, then they need to
specify it.
Add a ".ustring" attribute to the field name for filters to state that the
field is pointing to user space such that the kernel can take the
appropriate action to read that pointer.
Link: https://lore.kernel.org/all/[email protected]/
Fixes: 77360f9bbc7e ("tracing: Add test for user space strings when filtering on string pointers")
Tested-by: Sven Schnelle <[email protected]>
Signed-off-by: Steven Rostedt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
Documentation/trace/events.rst | 9 ++++
kernel/trace/trace_events_filter.c | 81 +++++++++++++++++++++---------
2 files changed, 66 insertions(+), 24 deletions(-)
diff --git a/Documentation/trace/events.rst b/Documentation/trace/events.rst
index 58a471b690e07..9df29a935757a 100644
--- a/Documentation/trace/events.rst
+++ b/Documentation/trace/events.rst
@@ -198,6 +198,15 @@ The glob (~) accepts a wild card character (\*,?) and character classes
prev_comm ~ "*sh*"
prev_comm ~ "ba*sh"
+If the field is a pointer that points into user space (for example
+"filename" from sys_enter_openat), then you have to append ".ustring" to the
+field name::
+
+ filename.ustring ~ "password"
+
+As the kernel will have to know how to retrieve the memory that the pointer
+is at from user space.
+
5.2 Setting filters
-------------------
diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c
index 7b1fb811cb0ab..a255ffbe342f3 100644
--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -665,6 +665,23 @@ struct ustring_buffer {
static __percpu struct ustring_buffer *ustring_per_cpu;
static __always_inline char *test_string(char *str)
+{
+ struct ustring_buffer *ubuf;
+ char *kstr;
+
+ if (!ustring_per_cpu)
+ return NULL;
+
+ ubuf = this_cpu_ptr(ustring_per_cpu);
+ kstr = ubuf->buffer;
+
+ /* For safety, do not trust the string pointer */
+ if (!strncpy_from_kernel_nofault(kstr, str, USTRING_BUF_SIZE))
+ return NULL;
+ return kstr;
+}
+
+static __always_inline char *test_ustring(char *str)
{
struct ustring_buffer *ubuf;
char __user *ustr;
@@ -676,23 +693,11 @@ static __always_inline char *test_string(char *str)
ubuf = this_cpu_ptr(ustring_per_cpu);
kstr = ubuf->buffer;
- /*
- * We use TASK_SIZE to denote user or kernel space, but this will
- * not work for all architectures. If it picks the wrong one, it may
- * just fail the filter (but will not bug).
- *
- * TODO: Have a way to properly denote which one this is for.
- */
- if (likely((unsigned long)str >= TASK_SIZE)) {
- /* For safety, do not trust the string pointer */
- if (!strncpy_from_kernel_nofault(kstr, str, USTRING_BUF_SIZE))
- return NULL;
- } else {
- /* user space address? */
- ustr = (char __user *)str;
- if (!strncpy_from_user_nofault(kstr, ustr, USTRING_BUF_SIZE))
- return NULL;
- }
+ /* user space address? */
+ ustr = (char __user *)str;
+ if (!strncpy_from_user_nofault(kstr, ustr, USTRING_BUF_SIZE))
+ return NULL;
+
return kstr;
}
@@ -709,24 +714,42 @@ static int filter_pred_string(struct filter_pred *pred, void *event)
return match;
}
+static __always_inline int filter_pchar(struct filter_pred *pred, char *str)
+{
+ int cmp, match;
+ int len;
+
+ len = strlen(str) + 1; /* including tailing '\0' */
+ cmp = pred->regex.match(str, &pred->regex, len);
+
+ match = cmp ^ pred->not;
+
+ return match;
+}
/* Filter predicate for char * pointers */
static int filter_pred_pchar(struct filter_pred *pred, void *event)
{
char **addr = (char **)(event + pred->offset);
char *str;
- int cmp, match;
- int len;
str = test_string(*addr);
if (!str)
return 0;
- len = strlen(str) + 1; /* including tailing '\0' */
- cmp = pred->regex.match(str, &pred->regex, len);
+ return filter_pchar(pred, str);
+}
- match = cmp ^ pred->not;
+/* Filter predicate for char * pointers in user space*/
+static int filter_pred_pchar_user(struct filter_pred *pred, void *event)
+{
+ char **addr = (char **)(event + pred->offset);
+ char *str;
- return match;
+ str = test_ustring(*addr);
+ if (!str)
+ return 0;
+
+ return filter_pchar(pred, str);
}
/*
@@ -1206,6 +1229,7 @@ static int parse_pred(const char *str, void *data,
struct filter_pred *pred = NULL;
char num_buf[24]; /* Big enough to hold an address */
char *field_name;
+ bool ustring = false;
char q;
u64 val;
int len;
@@ -1240,6 +1264,12 @@ static int parse_pred(const char *str, void *data,
return -EINVAL;
}
+ /* See if the field is a user space string */
+ if ((len = str_has_prefix(str + i, ".ustring"))) {
+ ustring = true;
+ i += len;
+ }
+
while (isspace(str[i]))
i++;
@@ -1377,7 +1407,10 @@ static int parse_pred(const char *str, void *data,
goto err_mem;
}
- pred->fn = filter_pred_pchar;
+ if (ustring)
+ pred->fn = filter_pred_pchar_user;
+ else
+ pred->fn = filter_pred_pchar;
}
/* go past the last quote */
i++;
--
2.34.1
From: Randy Dunlap <[email protected]>
commit e01b042e580f1fbf4fd8da467442451da00c7a90 upstream.
__setup() handlers should return 1 on success, i.e., the parameter
has been handled. A return of 0 causes the "option=value" string to be
added to init's environment strings, polluting it.
Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.")
Fixes: f3240e2811f0 ("stmmac: remove warning when compile as built-in (V2)")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Link: lore.kernel.org/r/[email protected]
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Cc: Jose Abreu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -5428,7 +5428,7 @@ static int __init stmmac_cmdline_opt(cha
char *opt;
if (!str || !*str)
- return -EINVAL;
+ return 1;
while ((opt = strsep(&str, ",")) != NULL) {
if (!strncmp(opt, "debug:", 6)) {
if (kstrtoint(opt + 6, 0, &debug))
@@ -5459,11 +5459,11 @@ static int __init stmmac_cmdline_opt(cha
goto err;
}
}
- return 0;
+ return 1;
err:
pr_err("%s: ERROR broken module parameter conversion", __func__);
- return -EINVAL;
+ return 1;
}
__setup("stmmaceth=", stmmac_cmdline_opt);
From: Sasha Neftin <[email protected]>
commit c4208653a327a09da1e9e7b10299709b6d9b17bf upstream.
Similar to "igc_read_phy_reg_gpy: drop premature return" patch.
igc_write_phy_reg_gpy checks the return value from igc_write_phy_reg_mdic
and if it's not 0, returns immediately. By doing this, it leaves the HW
semaphore in the acquired state.
Drop this premature return statement, the function returns after
releasing the semaphore immediately anyway.
Fixes: 5586838fe9ce ("igc: Add code for PHY support")
Suggested-by: Dima Ruinskiy <[email protected]>
Reported-by: Corinna Vinschen <[email protected]>
Signed-off-by: Sasha Neftin <[email protected]>
Tested-by: Naama Meir <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/intel/igc/igc_phy.c | 2 --
1 file changed, 2 deletions(-)
--- a/drivers/net/ethernet/intel/igc/igc_phy.c
+++ b/drivers/net/ethernet/intel/igc/igc_phy.c
@@ -748,8 +748,6 @@ s32 igc_write_phy_reg_gpy(struct igc_hw
if (ret_val)
return ret_val;
ret_val = igc_write_phy_reg_mdic(hw, offset, data);
- if (ret_val)
- return ret_val;
hw->phy.ops.release(hw);
} else {
ret_val = igc_write_xmdio_reg(hw, (u16)offset, dev_addr,
From: D. Wythe <[email protected]>
commit 4940a1fdf31c39f0806ac831cde333134862030b upstream.
The problem of SMC_CLC_DECL_ERR_REGRMB on the server is very clear.
Based on the fact that whether a new SMC connection can be accepted or
not depends on not only the limit of conn nums, but also the available
entries of rtoken. Since the rtoken release is trigger by peer, while
the conn nums is decrease by local, tons of thing can happen in this
time difference.
This only thing that needs to be mentioned is that now all connection
creations are completely protected by smc_server_lgr_pending lock, it's
enough to check only the available entries in rtokens_used_mask.
Fixes: cd6851f30386 ("smc: remote memory buffers (RMBs)")
Signed-off-by: D. Wythe <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/smc/smc_core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/smc/smc_core.c
+++ b/net/smc/smc_core.c
@@ -1316,7 +1316,8 @@ int smc_conn_create(struct smc_sock *smc
(ini->smcd_version == SMC_V2 ||
lgr->vlan_id == ini->vlan_id) &&
(role == SMC_CLNT || ini->is_smcd ||
- lgr->conns_num < SMC_RMBS_PER_LGR_MAX)) {
+ (lgr->conns_num < SMC_RMBS_PER_LGR_MAX &&
+ !bitmap_full(lgr->rtokens_used_mask, SMC_RMBS_PER_LGR_MAX)))) {
/* link group found */
ini->first_contact_local = 0;
conn->lgr = lgr;
From: Hugh Dickins <[email protected]>
commit f2b277c4d1c63a85127e8aa2588e9cc3bd21cb99 upstream.
Wangyong reports: after enabling tmpfs filesystem to support transparent
hugepage with the following command:
echo always > /sys/kernel/mm/transparent_hugepage/shmem_enabled
the docker program tries to add F_SEAL_WRITE through the following
command, but it fails unexpectedly with errno EBUSY:
fcntl(5, F_ADD_SEALS, F_SEAL_WRITE) = -1.
That is because memfd_tag_pins() and memfd_wait_for_pins() were never
updated for shmem huge pages: checking page_mapcount() against
page_count() is hopeless on THP subpages - they need to check
total_mapcount() against page_count() on THP heads only.
Make memfd_tag_pins() (compared > 1) as strict as memfd_wait_for_pins()
(compared != 1): either can be justified, but given the non-atomic
total_mapcount() calculation, it is better now to be strict. Bear in
mind that total_mapcount() itself scans all of the THP subpages, when
choosing to take an XA_CHECK_SCHED latency break.
Also fix the unlikely xa_is_value() case in memfd_wait_for_pins(): if a
page has been swapped out since memfd_tag_pins(), then its refcount must
have fallen, and so it can safely be untagged.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Hugh Dickins <[email protected]>
Reported-by: Zeal Robot <[email protected]>
Reported-by: wangyong <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: CGEL ZTE <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Yang Yang <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/memfd.c | 40 ++++++++++++++++++++++++++++------------
1 file changed, 28 insertions(+), 12 deletions(-)
--- a/mm/memfd.c
+++ b/mm/memfd.c
@@ -31,20 +31,28 @@
static void memfd_tag_pins(struct xa_state *xas)
{
struct page *page;
- unsigned int tagged = 0;
+ int latency = 0;
+ int cache_count;
lru_add_drain();
xas_lock_irq(xas);
xas_for_each(xas, page, ULONG_MAX) {
- if (xa_is_value(page))
- continue;
- page = find_subpage(page, xas->xa_index);
- if (page_count(page) - page_mapcount(page) > 1)
+ cache_count = 1;
+ if (!xa_is_value(page) &&
+ PageTransHuge(page) && !PageHuge(page))
+ cache_count = HPAGE_PMD_NR;
+
+ if (!xa_is_value(page) &&
+ page_count(page) - total_mapcount(page) != cache_count)
xas_set_mark(xas, MEMFD_TAG_PINNED);
+ if (cache_count != 1)
+ xas_set(xas, page->index + cache_count);
- if (++tagged % XA_CHECK_SCHED)
+ latency += cache_count;
+ if (latency < XA_CHECK_SCHED)
continue;
+ latency = 0;
xas_pause(xas);
xas_unlock_irq(xas);
@@ -73,7 +81,8 @@ static int memfd_wait_for_pins(struct ad
error = 0;
for (scan = 0; scan <= LAST_SCAN; scan++) {
- unsigned int tagged = 0;
+ int latency = 0;
+ int cache_count;
if (!xas_marked(&xas, MEMFD_TAG_PINNED))
break;
@@ -87,10 +96,14 @@ static int memfd_wait_for_pins(struct ad
xas_lock_irq(&xas);
xas_for_each_marked(&xas, page, ULONG_MAX, MEMFD_TAG_PINNED) {
bool clear = true;
- if (xa_is_value(page))
- continue;
- page = find_subpage(page, xas.xa_index);
- if (page_count(page) - page_mapcount(page) != 1) {
+
+ cache_count = 1;
+ if (!xa_is_value(page) &&
+ PageTransHuge(page) && !PageHuge(page))
+ cache_count = HPAGE_PMD_NR;
+
+ if (!xa_is_value(page) && cache_count !=
+ page_count(page) - total_mapcount(page)) {
/*
* On the last scan, we clean up all those tags
* we inserted; but make a note that we still
@@ -103,8 +116,11 @@ static int memfd_wait_for_pins(struct ad
}
if (clear)
xas_clear_mark(&xas, MEMFD_TAG_PINNED);
- if (++tagged % XA_CHECK_SCHED)
+
+ latency += cache_count;
+ if (latency < XA_CHECK_SCHED)
continue;
+ latency = 0;
xas_pause(&xas);
xas_unlock_irq(&xas);
From: Christophe JAILLET <[email protected]>
[ Upstream commit b113737cf12964a20cc3ba1ddabe6229099661c6 ]
This reverts commit 3c0d64e867ed
("soc: fsl: guts: reuse machine name from device tree").
A following patch will fix the missing memory allocation failure check
instead.
Suggested-by: Tyrel Datwyler <[email protected]>
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/soc/fsl/guts.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/soc/fsl/guts.c b/drivers/soc/fsl/guts.c
index 34810f9bb2ee..6d7465afd6fd 100644
--- a/drivers/soc/fsl/guts.c
+++ b/drivers/soc/fsl/guts.c
@@ -28,7 +28,6 @@ struct fsl_soc_die_attr {
static struct guts *guts;
static struct soc_device_attribute soc_dev_attr;
static struct soc_device *soc_dev;
-static struct device_node *root;
/* SoC die attribute definition for QorIQ platform */
@@ -138,7 +137,7 @@ static u32 fsl_guts_get_svr(void)
static int fsl_guts_probe(struct platform_device *pdev)
{
- struct device_node *np = pdev->dev.of_node;
+ struct device_node *root, *np = pdev->dev.of_node;
struct device *dev = &pdev->dev;
struct resource *res;
const struct fsl_soc_die_attr *soc_die;
@@ -161,8 +160,9 @@ static int fsl_guts_probe(struct platform_device *pdev)
root = of_find_node_by_path("/");
if (of_property_read_string(root, "model", &machine))
of_property_read_string_index(root, "compatible", 0, &machine);
+ of_node_put(root);
if (machine)
- soc_dev_attr.machine = machine;
+ soc_dev_attr.machine = devm_kstrdup(dev, machine, GFP_KERNEL);
svr = fsl_guts_get_svr();
soc_die = fsl_soc_die_match(svr, fsl_soc_die);
@@ -197,7 +197,6 @@ static int fsl_guts_probe(struct platform_device *pdev)
static int fsl_guts_remove(struct platform_device *dev)
{
soc_device_unregister(soc_dev);
- of_node_put(root);
return 0;
}
--
2.34.1
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 767b9825ed1765894e569a3d698749d40d83762a ]
The function pci_find_capability() in t3_prep_adapter() can fail, so its
return value should be checked.
Fixes: 4d22de3e6cc4 ("Add support for the latest 1G/10G Chelsio adapter, T3")
Reported-by: TOTE Robot <[email protected]>
Signed-off-by: Jia-Ju Bai <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/chelsio/cxgb3/t3_hw.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
index 7ff31d1026fb..e0d34e64fc6c 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
@@ -3678,6 +3678,8 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai,
MAC_STATS_ACCUM_SECS : (MAC_STATS_ACCUM_SECS * 10);
adapter->params.pci.vpd_cap_addr =
pci_find_capability(adapter->pdev, PCI_CAP_ID_VPD);
+ if (!adapter->params.pci.vpd_cap_addr)
+ return -ENODEV;
ret = get_vpd_params(adapter, &adapter->params.vpd);
if (ret < 0)
return ret;
--
2.34.1
From: Randy Dunlap <[email protected]>
commit 7b83299e5b9385943a857d59e15cba270df20d7e upstream.
early_param() handlers should return 0 on success.
__setup() handlers should return 1 on success, i.e., the parameter
has been handled. A return of 0 would cause the "option=value" string
to be added to init's environment strings, polluting it.
../arch/arm/mm/mmu.c: In function 'test_early_cachepolicy':
../arch/arm/mm/mmu.c:215:1: error: no return statement in function returning non-void [-Werror=return-type]
../arch/arm/mm/mmu.c: In function 'test_noalign_setup':
../arch/arm/mm/mmu.c:221:1: error: no return statement in function returning non-void [-Werror=return-type]
Fixes: b849a60e0903 ("ARM: make cr_alignment read-only #ifndef CONFIG_CPU_CP15")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Igor Zhbanov <[email protected]>
Cc: Uwe Kleine-König <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/mm/mmu.c | 2 ++
1 file changed, 2 insertions(+)
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -212,12 +212,14 @@ early_param("ecc", early_ecc);
static int __init early_cachepolicy(char *p)
{
pr_warn("cachepolicy kernel parameter not supported without cp15\n");
+ return 0;
}
early_param("cachepolicy", early_cachepolicy);
static int __init noalign_setup(char *__unused)
{
pr_warn("noalign kernel parameter not supported without cp15\n");
+ return 1;
}
__setup("noalign", noalign_setup);
From: D. Wythe <[email protected]>
commit 9f1c50cf39167ff71dc5953a3234f3f6eeb8fcb5 upstream.
There's a potential leak issue under following execution sequence :
smc_release smc_connect_work
if (sk->sk_state == SMC_INIT)
send_clc_confirim
tcp_abort();
...
sk.sk_state = SMC_ACTIVE
smc_close_active
switch(sk->sk_state) {
...
case SMC_ACTIVE:
smc_close_final()
// then wait peer closed
Unfortunately, tcp_abort() may discard CLC CONFIRM messages that are
still in the tcp send buffer, in which case our connection token cannot
be delivered to the server side, which means that we cannot get a
passive close message at all. Therefore, it is impossible for the to be
disconnected at all.
This patch tries a very simple way to avoid this issue, once the state
has changed to SMC_ACTIVE after tcp_abort(), we can actively abort the
smc connection, considering that the state is SMC_INIT before
tcp_abort(), abandoning the complete disconnection process should not
cause too much problem.
In fact, this problem may exist as long as the CLC CONFIRM message is
not received by the server. Whether a timer should be added after
smc_close_final() needs to be discussed in the future. But even so, this
patch provides a faster release for connection in above case, it should
also be valuable.
Fixes: 39f41f367b08 ("net/smc: common release code for non-accepted sockets")
Signed-off-by: D. Wythe <[email protected]>
Acked-by: Karsten Graul <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/smc/af_smc.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -180,7 +180,7 @@ static int smc_release(struct socket *so
{
struct sock *sk = sock->sk;
struct smc_sock *smc;
- int rc = 0;
+ int old_state, rc = 0;
if (!sk)
goto out;
@@ -188,8 +188,10 @@ static int smc_release(struct socket *so
sock_hold(sk); /* sock_put below */
smc = smc_sk(sk);
+ old_state = sk->sk_state;
+
/* cleanup for a dangling non-blocking connect */
- if (smc->connect_nonblock && sk->sk_state == SMC_INIT)
+ if (smc->connect_nonblock && old_state == SMC_INIT)
tcp_abort(smc->clcsock->sk, ECONNABORTED);
if (cancel_work_sync(&smc->connect_work))
@@ -203,6 +205,10 @@ static int smc_release(struct socket *so
else
lock_sock(sk);
+ if (old_state == SMC_INIT && sk->sk_state == SMC_ACTIVE &&
+ !smc->use_fallback)
+ smc_close_active_abort(smc);
+
rc = __smc_release(smc);
/* detach socket */
From: Amit Cohen <[email protected]>
commit dc9752075341e7beb653e37c6f4a3723074dc8bc upstream.
The test adds tc filters and checks how many of them were offloaded by
grepping for 'in_hw'.
iproute2 commit f4cd4f127047 ("tc: add skip_hw and skip_sw to control
action offload") added offload indication to tc actions, producing the
following output:
$ tc filter show dev swp2 ingress
...
filter protocol ipv6 pref 1000 flower chain 0 handle 0x7c0
eth_type ipv6
dst_ip 2001:db8:1::7bf
skip_sw
in_hw in_hw_count 1
action order 1: police 0x7c0 rate 10Mbit burst 100Kb mtu 2Kb action drop overhead 0b
ref 1 bind 1
not_in_hw
used_hw_stats immediate
The current grep expression matches on both 'in_hw' and 'not_in_hw',
resulting in incorrect results.
Fix that by using JSON output instead.
Fixes: 5061e773264b ("selftests: mlxsw: Add scale test for tc-police")
Signed-off-by: Amit Cohen <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
tools/testing/selftests/drivers/net/mlxsw/tc_police_scale.sh | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_police_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_police_scale.sh
index 3e3e06ea5703..86e787895f78 100644
--- a/tools/testing/selftests/drivers/net/mlxsw/tc_police_scale.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/tc_police_scale.sh
@@ -60,7 +60,8 @@ __tc_police_test()
tc_police_rules_create $count $should_fail
- offload_count=$(tc filter show dev $swp1 ingress | grep in_hw | wc -l)
+ offload_count=$(tc -j filter show dev $swp1 ingress |
+ jq "[.[] | select(.options.in_hw == true)] | length")
((offload_count == count))
check_err_fail $should_fail $? "tc police offload count"
}
--
2.35.1
From: Sukadev Bhattiprolu <[email protected]>
commit 8d0657f39f487d904fca713e0bc39c2707382553 upstream.
Fix a tiny memory leak when flushing the reset work queue.
Fixes: 2770a7984db5 ("ibmvnic: Introduce hard reset recovery")
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/ibm/ibmvnic.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -2354,8 +2354,10 @@ static int ibmvnic_reset(struct ibmvnic_
* flush reset queue and process this reset
*/
if (adapter->force_reset_recovery && !list_empty(&adapter->rwi_list)) {
- list_for_each_safe(entry, tmp_entry, &adapter->rwi_list)
+ list_for_each_safe(entry, tmp_entry, &adapter->rwi_list) {
list_del(entry);
+ kfree(list_entry(entry, struct ibmvnic_rwi, list));
+ }
}
rwi->reset_reason = reason;
list_add_tail(&rwi->list, &adapter->rwi_list);
From: Mateusz Palczewski <[email protected]>
[ Upstream commit 45eebd62999d37d13568723524b99d828e0ce22c ]
Replace state changes of iavf state machine
with a method that also tracks the previous
state the machine was on.
This change is required for further work with
refactoring init and watchdog state machines.
Tracking of previous state would help us
recover iavf after failure has occurred.
Signed-off-by: Jakub Pawlak <[email protected]>
Signed-off-by: Jan Sokolowski <[email protected]>
Signed-off-by: Mateusz Palczewski <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/iavf/iavf.h | 10 +++++
drivers/net/ethernet/intel/iavf/iavf_main.c | 37 ++++++++++---------
.../net/ethernet/intel/iavf/iavf_virtchnl.c | 2 +-
3 files changed, 31 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf.h b/drivers/net/ethernet/intel/iavf/iavf.h
index 6766446a33f4..ce1e2fb22e09 100644
--- a/drivers/net/ethernet/intel/iavf/iavf.h
+++ b/drivers/net/ethernet/intel/iavf/iavf.h
@@ -309,6 +309,7 @@ struct iavf_adapter {
struct iavf_hw hw; /* defined in iavf_type.h */
enum iavf_state_t state;
+ enum iavf_state_t last_state;
unsigned long crit_section;
struct delayed_work watchdog_task;
@@ -378,6 +379,15 @@ struct iavf_device {
extern char iavf_driver_name[];
extern struct workqueue_struct *iavf_wq;
+static inline void iavf_change_state(struct iavf_adapter *adapter,
+ enum iavf_state_t state)
+{
+ if (adapter->state != state) {
+ adapter->last_state = adapter->state;
+ adapter->state = state;
+ }
+}
+
int iavf_up(struct iavf_adapter *adapter);
void iavf_down(struct iavf_adapter *adapter);
int iavf_process_config(struct iavf_adapter *adapter);
diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index 07170b77d42b..bd1fb3774769 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -963,7 +963,7 @@ static void iavf_configure(struct iavf_adapter *adapter)
**/
static void iavf_up_complete(struct iavf_adapter *adapter)
{
- adapter->state = __IAVF_RUNNING;
+ iavf_change_state(adapter, __IAVF_RUNNING);
clear_bit(__IAVF_VSI_DOWN, adapter->vsi.state);
iavf_napi_enable_all(adapter);
@@ -1698,7 +1698,7 @@ static int iavf_startup(struct iavf_adapter *adapter)
iavf_shutdown_adminq(hw);
goto err;
}
- adapter->state = __IAVF_INIT_VERSION_CHECK;
+ iavf_change_state(adapter, __IAVF_INIT_VERSION_CHECK);
err:
return err;
}
@@ -1722,7 +1722,7 @@ static int iavf_init_version_check(struct iavf_adapter *adapter)
if (!iavf_asq_done(hw)) {
dev_err(&pdev->dev, "Admin queue command never completed\n");
iavf_shutdown_adminq(hw);
- adapter->state = __IAVF_STARTUP;
+ iavf_change_state(adapter, __IAVF_STARTUP);
goto err;
}
@@ -1745,8 +1745,7 @@ static int iavf_init_version_check(struct iavf_adapter *adapter)
err);
goto err;
}
- adapter->state = __IAVF_INIT_GET_RESOURCES;
-
+ iavf_change_state(adapter, __IAVF_INIT_GET_RESOURCES);
err:
return err;
}
@@ -1862,7 +1861,7 @@ static int iavf_init_get_resources(struct iavf_adapter *adapter)
if (netdev->features & NETIF_F_GRO)
dev_info(&pdev->dev, "GRO is enabled\n");
- adapter->state = __IAVF_DOWN;
+ iavf_change_state(adapter, __IAVF_DOWN);
set_bit(__IAVF_VSI_DOWN, adapter->vsi.state);
rtnl_unlock();
@@ -1910,7 +1909,7 @@ static void iavf_watchdog_task(struct work_struct *work)
goto restart_watchdog;
if (adapter->flags & IAVF_FLAG_PF_COMMS_FAILED)
- adapter->state = __IAVF_COMM_FAILED;
+ iavf_change_state(adapter, __IAVF_COMM_FAILED);
switch (adapter->state) {
case __IAVF_COMM_FAILED:
@@ -1921,7 +1920,7 @@ static void iavf_watchdog_task(struct work_struct *work)
/* A chance for redemption! */
dev_err(&adapter->pdev->dev,
"Hardware came out of reset. Attempting reinit.\n");
- adapter->state = __IAVF_STARTUP;
+ iavf_change_state(adapter, __IAVF_STARTUP);
adapter->flags &= ~IAVF_FLAG_PF_COMMS_FAILED;
queue_delayed_work(iavf_wq, &adapter->init_task, 10);
clear_bit(__IAVF_IN_CRITICAL_TASK,
@@ -1971,9 +1970,10 @@ static void iavf_watchdog_task(struct work_struct *work)
goto restart_watchdog;
}
- /* check for hw reset */
+ /* check for hw reset */
reg_val = rd32(hw, IAVF_VF_ARQLEN1) & IAVF_VF_ARQLEN1_ARQENABLE_MASK;
if (!reg_val) {
+ iavf_change_state(adapter, __IAVF_RESETTING);
adapter->flags |= IAVF_FLAG_RESET_PENDING;
adapter->aq_required = 0;
adapter->current_op = VIRTCHNL_OP_UNKNOWN;
@@ -2053,7 +2053,7 @@ static void iavf_disable_vf(struct iavf_adapter *adapter)
adapter->netdev->flags &= ~IFF_UP;
clear_bit(__IAVF_IN_CRITICAL_TASK, &adapter->crit_section);
adapter->flags &= ~IAVF_FLAG_RESET_PENDING;
- adapter->state = __IAVF_DOWN;
+ iavf_change_state(adapter, __IAVF_DOWN);
wake_up(&adapter->down_waitqueue);
dev_info(&adapter->pdev->dev, "Reset task did not complete, VF disabled\n");
}
@@ -2165,7 +2165,7 @@ static void iavf_reset_task(struct work_struct *work)
}
iavf_irq_disable(adapter);
- adapter->state = __IAVF_RESETTING;
+ iavf_change_state(adapter, __IAVF_RESETTING);
adapter->flags &= ~IAVF_FLAG_RESET_PENDING;
/* free the Tx/Rx rings and descriptors, might be better to just
@@ -2265,11 +2265,14 @@ static void iavf_reset_task(struct work_struct *work)
iavf_configure(adapter);
+ /* iavf_up_complete() will switch device back
+ * to __IAVF_RUNNING
+ */
iavf_up_complete(adapter);
iavf_irq_enable(adapter, true);
} else {
- adapter->state = __IAVF_DOWN;
+ iavf_change_state(adapter, __IAVF_DOWN);
wake_up(&adapter->down_waitqueue);
}
clear_bit(__IAVF_IN_CLIENT_TASK, &adapter->crit_section);
@@ -3277,7 +3280,7 @@ static int iavf_close(struct net_device *netdev)
adapter->flags |= IAVF_FLAG_CLIENT_NEEDS_CLOSE;
iavf_down(adapter);
- adapter->state = __IAVF_DOWN_PENDING;
+ iavf_change_state(adapter, __IAVF_DOWN_PENDING);
iavf_free_traffic_irqs(adapter);
clear_bit(__IAVF_IN_CRITICAL_TASK, &adapter->crit_section);
@@ -3661,7 +3664,7 @@ static void iavf_init_task(struct work_struct *work)
"Failed to communicate with PF; waiting before retry\n");
adapter->flags |= IAVF_FLAG_PF_COMMS_FAILED;
iavf_shutdown_adminq(hw);
- adapter->state = __IAVF_STARTUP;
+ iavf_change_state(adapter, __IAVF_STARTUP);
queue_delayed_work(iavf_wq, &adapter->init_task, HZ * 5);
goto out;
}
@@ -3687,7 +3690,7 @@ static void iavf_shutdown(struct pci_dev *pdev)
if (iavf_lock_timeout(adapter, __IAVF_IN_CRITICAL_TASK, 5000))
dev_warn(&adapter->pdev->dev, "failed to set __IAVF_IN_CRITICAL_TASK in %s\n", __FUNCTION__);
/* Prevent the watchdog from running. */
- adapter->state = __IAVF_REMOVE;
+ iavf_change_state(adapter, __IAVF_REMOVE);
adapter->aq_required = 0;
clear_bit(__IAVF_IN_CRITICAL_TASK, &adapter->crit_section);
@@ -3760,7 +3763,7 @@ static int iavf_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
hw->back = adapter;
adapter->msg_enable = BIT(DEFAULT_DEBUG_LEVEL_SHIFT) - 1;
- adapter->state = __IAVF_STARTUP;
+ iavf_change_state(adapter, __IAVF_STARTUP);
/* Call save state here because it relies on the adapter struct. */
pci_save_state(pdev);
@@ -3928,7 +3931,7 @@ static void iavf_remove(struct pci_dev *pdev)
dev_warn(&adapter->pdev->dev, "failed to set __IAVF_IN_CRITICAL_TASK in %s\n", __FUNCTION__);
/* Shut down all the garbage mashers on the detention level */
- adapter->state = __IAVF_REMOVE;
+ iavf_change_state(adapter, __IAVF_REMOVE);
adapter->aq_required = 0;
adapter->flags &= ~IAVF_FLAG_REINIT_ITR_NEEDED;
iavf_free_all_tx_resources(adapter);
diff --git a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c
index 8be3151f2c62..ff479bf72144 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_virtchnl.c
@@ -1460,7 +1460,7 @@ void iavf_virtchnl_completion(struct iavf_adapter *adapter,
iavf_free_all_tx_resources(adapter);
iavf_free_all_rx_resources(adapter);
if (adapter->state == __IAVF_DOWN_PENDING) {
- adapter->state = __IAVF_DOWN;
+ iavf_change_state(adapter, __IAVF_DOWN);
wake_up(&adapter->down_waitqueue);
}
break;
--
2.34.1
From: Heiko Carstens <[email protected]>
commit c194dad21025dfd043210912653baab823bdff67 upstream.
s390 has a swap_ex_entry_fixup function, however it is not being used
since common code expects a swap_ex_entry_fixup define. If it is not
defined the default implementation will be used. So fix this by adding
a proper define.
However also the implementation of the function must be fixed, since a
NULL value for handler has a special meaning and must not be adjusted.
Luckily all of this doesn't fix a real bug currently: the main extable
is correctly sorted during build time, and for runtime sorting there
is currently no case where the handler field is not NULL.
Fixes: 05a68e892e89 ("s390/kernel: expand exception table logic to allow new handling options")
Acked-by: Ilya Leoshkevich <[email protected]>
Reviewed-by: Alexander Gordeev <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/include/asm/extable.h | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/arch/s390/include/asm/extable.h
+++ b/arch/s390/include/asm/extable.h
@@ -69,8 +69,13 @@ static inline void swap_ex_entry_fixup(s
{
a->fixup = b->fixup + delta;
b->fixup = tmp.fixup - delta;
- a->handler = b->handler + delta;
- b->handler = tmp.handler - delta;
+ a->handler = b->handler;
+ if (a->handler)
+ a->handler += delta;
+ b->handler = tmp.handler;
+ if (b->handler)
+ b->handler -= delta;
}
+#define swap_ex_entry_fixup swap_ex_entry_fixup
#endif
From: Hans de Goede <[email protected]>
commit 04b7762e37c95d9b965d16bb0e18dbd1fa2e2861 upstream.
Before these changes elan_suspend() would only disable the regulator
when device_may_wakeup() returns false; whereas elan_resume() would
unconditionally enable it, leading to an enable count imbalance when
device_may_wakeup() returns true.
This triggers the "WARN_ON(regulator->enable_count)" in regulator_put()
when the elan_i2c driver gets unbound, this happens e.g. with the
hot-plugable dock with Elan I2C touchpad for the Asus TF103C 2-in-1.
Fix this by making the regulator_enable() call also be conditional
on device_may_wakeup() returning false.
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/mouse/elan_i2c_core.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -1350,17 +1350,17 @@ static int __maybe_unused elan_resume(st
struct elan_tp_data *data = i2c_get_clientdata(client);
int error;
- if (device_may_wakeup(dev) && data->irq_wake) {
+ if (!device_may_wakeup(dev)) {
+ error = regulator_enable(data->vcc);
+ if (error) {
+ dev_err(dev, "error %d enabling regulator\n", error);
+ goto err;
+ }
+ } else if (data->irq_wake) {
disable_irq_wake(client->irq);
data->irq_wake = false;
}
- error = regulator_enable(data->vcc);
- if (error) {
- dev_err(dev, "error %d enabling regulator\n", error);
- goto err;
- }
-
error = elan_set_power(data, true);
if (error) {
dev_err(dev, "power up when resuming failed: %d\n", error);
From: Filipe Manana <[email protected]>
commit d99478874355d3a7b9d86dfb5d7590d5b1754b1f upstream.
When doing a full fsync, if we have prealloc extents beyond (or at) eof,
and the leaves that contain them were not modified in the current
transaction, we end up not logging them. This results in losing those
extents when we replay the log after a power failure, since the inode is
truncated to the current value of the logged i_size.
Just like for the fast fsync path, we need to always log all prealloc
extents starting at or beyond i_size. The fast fsync case was fixed in
commit 471d557afed155 ("Btrfs: fix loss of prealloc extents past i_size
after fsync log replay") but it missed the full fsync path. The problem
exists since the very early days, when the log tree was added by
commit e02119d5a7b439 ("Btrfs: Add a write ahead tree log to optimize
synchronous operations").
Example reproducer:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
# Create our test file with many file extent items, so that they span
# several leaves of metadata, even if the node/page size is 64K. Use
# direct IO and not fsync/O_SYNC because it's both faster and it avoids
# clearing the full sync flag from the inode - we want the fsync below
# to trigger the slow full sync code path.
$ xfs_io -f -d -c "pwrite -b 4K 0 16M" /mnt/foo
# Now add two preallocated extents to our file without extending the
# file's size. One right at i_size, and another further beyond, leaving
# a gap between the two prealloc extents.
$ xfs_io -c "falloc -k 16M 1M" /mnt/foo
$ xfs_io -c "falloc -k 20M 1M" /mnt/foo
# Make sure everything is durably persisted and the transaction is
# committed. This makes all created extents to have a generation lower
# than the generation of the transaction used by the next write and
# fsync.
sync
# Now overwrite only the first extent, which will result in modifying
# only the first leaf of metadata for our inode. Then fsync it. This
# fsync will use the slow code path (inode full sync bit is set) because
# it's the first fsync since the inode was created/loaded.
$ xfs_io -c "pwrite 0 4K" -c "fsync" /mnt/foo
# Extent list before power failure.
$ xfs_io -c "fiemap -v" /mnt/foo
/mnt/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..7]: 2178048..2178055 8 0x0
1: [8..16383]: 26632..43007 16376 0x0
2: [16384..32767]: 2156544..2172927 16384 0x0
3: [32768..34815]: 2172928..2174975 2048 0x800
4: [34816..40959]: hole 6144
5: [40960..43007]: 2174976..2177023 2048 0x801
<power fail>
# Mount fs again, trigger log replay.
$ mount /dev/sdc /mnt
# Extent list after power failure and log replay.
$ xfs_io -c "fiemap -v" /mnt/foo
/mnt/foo:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..7]: 2178048..2178055 8 0x0
1: [8..16383]: 26632..43007 16376 0x0
2: [16384..32767]: 2156544..2172927 16384 0x1
# The prealloc extents at file offsets 16M and 20M are missing.
So fix this by calling btrfs_log_prealloc_extents() when we are doing a
full fsync, so that we always log all prealloc extents beyond eof.
A test case for fstests will follow soon.
CC: [email protected] # 4.19+
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/tree-log.c | 43 +++++++++++++++++++++++++++++++------------
1 file changed, 31 insertions(+), 12 deletions(-)
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -4297,7 +4297,7 @@ static int log_one_extent(struct btrfs_t
/*
* Log all prealloc extents beyond the inode's i_size to make sure we do not
- * lose them after doing a fast fsync and replaying the log. We scan the
+ * lose them after doing a full/fast fsync and replaying the log. We scan the
* subvolume's root instead of iterating the inode's extent map tree because
* otherwise we can log incorrect extent items based on extent map conversion.
* That can happen due to the fact that extent maps are merged when they
@@ -5084,6 +5084,7 @@ static int copy_inode_items_to_log(struc
struct btrfs_log_ctx *ctx,
bool *need_log_inode_item)
{
+ const u64 i_size = i_size_read(&inode->vfs_inode);
struct btrfs_root *root = inode->root;
int ins_start_slot = 0;
int ins_nr = 0;
@@ -5104,13 +5105,21 @@ again:
if (min_key->type > max_key->type)
break;
- if (min_key->type == BTRFS_INODE_ITEM_KEY)
+ if (min_key->type == BTRFS_INODE_ITEM_KEY) {
*need_log_inode_item = false;
-
- if ((min_key->type == BTRFS_INODE_REF_KEY ||
- min_key->type == BTRFS_INODE_EXTREF_KEY) &&
- inode->generation == trans->transid &&
- !recursive_logging) {
+ } else if (min_key->type == BTRFS_EXTENT_DATA_KEY &&
+ min_key->offset >= i_size) {
+ /*
+ * Extents at and beyond eof are logged with
+ * btrfs_log_prealloc_extents().
+ * Only regular files have BTRFS_EXTENT_DATA_KEY keys,
+ * and no keys greater than that, so bail out.
+ */
+ break;
+ } else if ((min_key->type == BTRFS_INODE_REF_KEY ||
+ min_key->type == BTRFS_INODE_EXTREF_KEY) &&
+ inode->generation == trans->transid &&
+ !recursive_logging) {
u64 other_ino = 0;
u64 other_parent = 0;
@@ -5141,10 +5150,8 @@ again:
btrfs_release_path(path);
goto next_key;
}
- }
-
- /* Skip xattrs, we log them later with btrfs_log_all_xattrs() */
- if (min_key->type == BTRFS_XATTR_ITEM_KEY) {
+ } else if (min_key->type == BTRFS_XATTR_ITEM_KEY) {
+ /* Skip xattrs, logged later with btrfs_log_all_xattrs() */
if (ins_nr == 0)
goto next_slot;
ret = copy_items(trans, inode, dst_path, path,
@@ -5197,9 +5204,21 @@ next_key:
break;
}
}
- if (ins_nr)
+ if (ins_nr) {
ret = copy_items(trans, inode, dst_path, path, ins_start_slot,
ins_nr, inode_only, logged_isize);
+ if (ret)
+ return ret;
+ }
+
+ if (inode_only == LOG_INODE_ALL && S_ISREG(inode->vfs_inode.i_mode)) {
+ /*
+ * Release the path because otherwise we might attempt to double
+ * lock the same leaf with btrfs_log_prealloc_extents() below.
+ */
+ btrfs_release_path(path);
+ ret = btrfs_log_prealloc_extents(trans, inode, dst_path);
+ }
return ret;
}
From: Brian Norris <[email protected]>
commit b5fbaf7d779f5f02b7f75b080e7707222573be2a upstream.
Commit b18c6c3c7768 ("ASoC: rockchip: cdn-dp sound output use spdif")
switched the platform to SPDIF, but we didn't fix up the device tree.
Drop the pinctrl settings, because the 'spdif_bus' pins are either:
* unused (on kevin, bob), so the settings is ~harmless
* used by a different function (on scarlet), which causes probe
failures (!!)
Fixes: b18c6c3c7768 ("ASoC: rockchip: cdn-dp sound output use spdif")
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/20220114150129.v2.1.I46f64b00508d9dff34abe1c3e8d2defdab4ea1e5@changeid
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -281,7 +281,7 @@
sound: sound {
compatible = "rockchip,rk3399-gru-sound";
- rockchip,cpu = <&i2s0 &i2s2>;
+ rockchip,cpu = <&i2s0 &spdif>;
};
};
@@ -432,10 +432,6 @@ ap_i2c_audio: &i2c8 {
status = "okay";
};
-&i2s2 {
- status = "okay";
-};
-
&io_domains {
status = "okay";
@@ -532,6 +528,17 @@ ap_i2c_audio: &i2c8 {
vqmmc-supply = <&ppvar_sd_card_io>;
};
+&spdif {
+ status = "okay";
+
+ /*
+ * SPDIF is routed internally to DP; we either don't use these pins, or
+ * mux them to something else.
+ */
+ /delete-property/ pinctrl-0;
+ /delete-property/ pinctrl-names;
+};
+
&spi1 {
status = "okay";
From: Jiri Bohac <[email protected]>
commit a6d95c5a628a09be129f25d5663a7e9db8261f51 upstream.
This reverts commit b515d2637276a3810d6595e10ab02c13bfd0b63a.
Commit b515d2637276a3810d6595e10ab02c13bfd0b63a ("xfrm: xfrm_state_mtu
should return at least 1280 for ipv6") in v5.14 breaks the TCP MSS
calculation in ipsec transport mode, resulting complete stalls of TCP
connections. This happens when the (P)MTU is 1280 or slighly larger.
The desired formula for the MSS is:
MSS = (MTU - ESP_overhead) - IP header - TCP header
However, the above commit clamps the (MTU - ESP_overhead) to a
minimum of 1280, turning the formula into
MSS = max(MTU - ESP overhead, 1280) - IP header - TCP header
With the (P)MTU near 1280, the calculated MSS is too large and the
resulting TCP packets never make it to the destination because they
are over the actual PMTU.
The above commit also causes suboptimal double fragmentation in
xfrm tunnel mode, as described in
https://lore.kernel.org/netdev/[email protected]/
The original problem the above commit was trying to fix is now fixed
by commit 6596a0229541270fb8d38d989f91b78838e5e9da ("xfrm: fix MTU
regression").
Signed-off-by: Jiri Bohac <[email protected]>
Signed-off-by: Steffen Klassert <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/xfrm.h | 1 -
net/ipv4/esp4.c | 2 +-
net/ipv6/esp6.c | 2 +-
net/xfrm/xfrm_state.c | 14 ++------------
4 files changed, 4 insertions(+), 15 deletions(-)
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -1551,7 +1551,6 @@ void xfrm_sad_getinfo(struct net *net, s
void xfrm_spd_getinfo(struct net *net, struct xfrmk_spdinfo *si);
u32 xfrm_replay_seqhi(struct xfrm_state *x, __be32 net_seq);
int xfrm_init_replay(struct xfrm_state *x);
-u32 __xfrm_state_mtu(struct xfrm_state *x, int mtu);
u32 xfrm_state_mtu(struct xfrm_state *x, int mtu);
int __xfrm_init_state(struct xfrm_state *x, bool init_replay, bool offload);
int xfrm_init_state(struct xfrm_state *x);
--- a/net/ipv4/esp4.c
+++ b/net/ipv4/esp4.c
@@ -673,7 +673,7 @@ static int esp_output(struct xfrm_state
struct xfrm_dst *dst = (struct xfrm_dst *)skb_dst(skb);
u32 padto;
- padto = min(x->tfcpad, __xfrm_state_mtu(x, dst->child_mtu_cached));
+ padto = min(x->tfcpad, xfrm_state_mtu(x, dst->child_mtu_cached));
if (skb->len < padto)
esp.tfclen = padto - skb->len;
}
--- a/net/ipv6/esp6.c
+++ b/net/ipv6/esp6.c
@@ -708,7 +708,7 @@ static int esp6_output(struct xfrm_state
struct xfrm_dst *dst = (struct xfrm_dst *)skb_dst(skb);
u32 padto;
- padto = min(x->tfcpad, __xfrm_state_mtu(x, dst->child_mtu_cached));
+ padto = min(x->tfcpad, xfrm_state_mtu(x, dst->child_mtu_cached));
if (skb->len < padto)
esp.tfclen = padto - skb->len;
}
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -2537,7 +2537,7 @@ void xfrm_state_delete_tunnel(struct xfr
}
EXPORT_SYMBOL(xfrm_state_delete_tunnel);
-u32 __xfrm_state_mtu(struct xfrm_state *x, int mtu)
+u32 xfrm_state_mtu(struct xfrm_state *x, int mtu)
{
const struct xfrm_type *type = READ_ONCE(x->type);
struct crypto_aead *aead;
@@ -2568,17 +2568,7 @@ u32 __xfrm_state_mtu(struct xfrm_state *
return ((mtu - x->props.header_len - crypto_aead_authsize(aead) -
net_adj) & ~(blksize - 1)) + net_adj - 2;
}
-EXPORT_SYMBOL_GPL(__xfrm_state_mtu);
-
-u32 xfrm_state_mtu(struct xfrm_state *x, int mtu)
-{
- mtu = __xfrm_state_mtu(x, mtu);
-
- if (x->props.family == AF_INET6 && mtu < IPV6_MIN_MTU)
- return IPV6_MIN_MTU;
-
- return mtu;
-}
+EXPORT_SYMBOL_GPL(xfrm_state_mtu);
int __xfrm_init_state(struct xfrm_state *x, bool init_replay, bool offload)
{
From: Jacob Keller <[email protected]>
commit fadead80fe4c033b5e514fcbadd20b55c4494112 upstream.
Commit c503e63200c6 ("ice: Stop processing VF messages during teardown")
introduced a driver state flag, ICE_VF_DEINIT_IN_PROGRESS, which is
intended to prevent some issues with concurrently handling messages from
VFs while tearing down the VFs.
This change was motivated by crashes caused while tearing down and
bringing up VFs in rapid succession.
It turns out that the fix actually introduces issues with the VF driver
caused because the PF no longer responds to any messages sent by the VF
during its .remove routine. This results in the VF potentially removing
its DMA memory before the PF has shut down the device queues.
Additionally, the fix doesn't actually resolve concurrency issues within
the ice driver. It is possible for a VF to initiate a reset just prior
to the ice driver removing VFs. This can result in the remove task
concurrently operating while the VF is being reset. This results in
similar memory corruption and panics purportedly fixed by that commit.
Fix this concurrency at its root by protecting both the reset and
removal flows using the existing VF cfg_lock. This ensures that we
cannot remove the VF while any outstanding critical tasks such as a
virtchnl message or a reset are occurring.
This locking change also fixes the root cause originally fixed by commit
c503e63200c6 ("ice: Stop processing VF messages during teardown"), so we
can simply revert it.
Note that I kept these two changes together because simply reverting the
original commit alone would leave the driver vulnerable to worse race
conditions.
Fixes: c503e63200c6 ("ice: Stop processing VF messages during teardown")
Signed-off-by: Jacob Keller <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/intel/ice/ice_main.c | 2 +
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 35 ++++++++++++++++-------
2 files changed, 27 insertions(+), 10 deletions(-)
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -1602,7 +1602,9 @@ static void ice_handle_mdd_event(struct
* reset, so print the event prior to reset.
*/
ice_print_vf_rx_mdd_event(vf);
+ mutex_lock(&pf->vf[i].cfg_lock);
ice_reset_vf(&pf->vf[i], false);
+ mutex_unlock(&pf->vf[i].cfg_lock);
}
}
}
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -360,22 +360,26 @@ void ice_free_vfs(struct ice_pf *pf)
else
dev_warn(dev, "VFs are assigned - not disabling SR-IOV\n");
- /* Avoid wait time by stopping all VFs at the same time */
- ice_for_each_vf(pf, i)
- ice_dis_vf_qs(&pf->vf[i]);
-
tmp = pf->num_alloc_vfs;
pf->num_qps_per_vf = 0;
pf->num_alloc_vfs = 0;
for (i = 0; i < tmp; i++) {
- if (test_bit(ICE_VF_STATE_INIT, pf->vf[i].vf_states)) {
+ struct ice_vf *vf = &pf->vf[i];
+
+ mutex_lock(&vf->cfg_lock);
+
+ ice_dis_vf_qs(vf);
+
+ if (test_bit(ICE_VF_STATE_INIT, vf->vf_states)) {
/* disable VF qp mappings and set VF disable state */
- ice_dis_vf_mappings(&pf->vf[i]);
- set_bit(ICE_VF_STATE_DIS, pf->vf[i].vf_states);
- ice_free_vf_res(&pf->vf[i]);
+ ice_dis_vf_mappings(vf);
+ set_bit(ICE_VF_STATE_DIS, vf->vf_states);
+ ice_free_vf_res(vf);
}
- mutex_destroy(&pf->vf[i].cfg_lock);
+ mutex_unlock(&vf->cfg_lock);
+
+ mutex_destroy(&vf->cfg_lock);
}
if (ice_sriov_free_msix_res(pf))
@@ -1223,9 +1227,13 @@ bool ice_reset_all_vfs(struct ice_pf *pf
ice_for_each_vf(pf, v) {
vf = &pf->vf[v];
+ mutex_lock(&vf->cfg_lock);
+
ice_vf_pre_vsi_rebuild(vf);
ice_vf_rebuild_vsi(vf);
ice_vf_post_vsi_rebuild(vf);
+
+ mutex_unlock(&vf->cfg_lock);
}
ice_flush(hw);
@@ -1272,6 +1280,8 @@ bool ice_reset_vf(struct ice_vf *vf, boo
u32 reg;
int i;
+ lockdep_assert_held(&vf->cfg_lock);
+
dev = ice_pf_to_dev(pf);
if (test_bit(__ICE_VF_RESETS_DISABLED, pf->state)) {
@@ -1725,9 +1735,12 @@ void ice_process_vflr_event(struct ice_p
bit_idx = (hw->func_caps.vf_base_id + vf_id) % 32;
/* read GLGEN_VFLRSTAT register to find out the flr VFs */
reg = rd32(hw, GLGEN_VFLRSTAT(reg_idx));
- if (reg & BIT(bit_idx))
+ if (reg & BIT(bit_idx)) {
/* GLGEN_VFLRSTAT bit will be cleared in ice_reset_vf */
+ mutex_lock(&vf->cfg_lock);
ice_reset_vf(vf, true);
+ mutex_unlock(&vf->cfg_lock);
+ }
}
}
@@ -1804,7 +1817,9 @@ ice_vf_lan_overflow_event(struct ice_pf
if (!vf)
return;
+ mutex_lock(&vf->cfg_lock);
ice_vc_reset_vf(vf);
+ mutex_unlock(&vf->cfg_lock);
}
/**
From: Vladimir Oltean <[email protected]>
[ Upstream commit 10b6bb62ae1a49ee818fc479cf57b8900176773e ]
Ido Schimmel points out that since commit 52cff74eef5d ("dcbnl : Disable
software interrupts before taking dcb_lock"), the DCB API can be called
by drivers from softirq context.
One such in-tree example is the chelsio cxgb4 driver:
dcb_rpl
-> cxgb4_dcb_handle_fw_update
-> dcb_ieee_setapp
If the firmware for this driver happened to send an event which resulted
in a call to dcb_ieee_setapp() at the exact same time as another
DCB-enabled interface was unregistering on the same CPU, the softirq
would deadlock, because the interrupted process was already holding the
dcb_lock in dcbnl_flush_dev().
Fix this unlikely event by using spin_lock_bh() in dcbnl_flush_dev() as
in the rest of the dcbnl code.
Fixes: 91b0383fef06 ("net: dcb: flush lingering app table entries for unregistered devices")
Reported-by: Ido Schimmel <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/dcb/dcbnl.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/dcb/dcbnl.c b/net/dcb/dcbnl.c
index 799ff0efcc55..2535d3dfb92c 100644
--- a/net/dcb/dcbnl.c
+++ b/net/dcb/dcbnl.c
@@ -2067,7 +2067,7 @@ static void dcbnl_flush_dev(struct net_device *dev)
{
struct dcb_app_type *itr, *tmp;
- spin_lock(&dcb_lock);
+ spin_lock_bh(&dcb_lock);
list_for_each_entry_safe(itr, tmp, &dcb_app_list, list) {
if (itr->ifindex == dev->ifindex) {
@@ -2076,7 +2076,7 @@ static void dcbnl_flush_dev(struct net_device *dev)
}
}
- spin_unlock(&dcb_lock);
+ spin_unlock_bh(&dcb_lock);
}
static int dcbnl_netdevice_event(struct notifier_block *nb,
--
2.34.1
From: Alyssa Ross <[email protected]>
commit 1ba603f56568c3b4c2542dfba07afa25f21dcff3 upstream.
modprobe can't handle spaces in aliases. Get rid of it to fix the issue.
Link: https://lore.kernel.org/r/[email protected]
Fixes: aa4f886f3893 ("firmware: arm_scmi: add basic driver infrastructure for SCMI")
Reviewed-by: Cristian Marussi <[email protected]>
Signed-off-by: Alyssa Ross <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/firmware/arm_scmi/driver.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/firmware/arm_scmi/driver.c
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -979,7 +979,7 @@ static void __exit scmi_driver_exit(void
}
module_exit(scmi_driver_exit);
-MODULE_ALIAS("platform: arm-scmi");
+MODULE_ALIAS("platform:arm-scmi");
MODULE_AUTHOR("Sudeep Holla <[email protected]>");
MODULE_DESCRIPTION("ARM SCMI protocol driver");
MODULE_LICENSE("GPL v2");
From: Jann Horn <[email protected]>
commit 258dd902022cb10c83671176688074879517fd21 upstream.
When the "block" flag is false, the old code would sometimes still call
check_var_size(), which wrongly tells ->query_variable_store() that it can
block.
As far as I can tell, this can't really materialize as a bug at the moment,
because ->query_variable_store only does something on X86 with generic EFI,
and in that configuration we always take the efivar_entry_set_nonblocking()
path.
Fixes: ca0e30dcaa53 ("efi: Add nonblocking option to efi_query_variable_store()")
Signed-off-by: Jann Horn <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/firmware/efi/vars.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/firmware/efi/vars.c
+++ b/drivers/firmware/efi/vars.c
@@ -742,6 +742,7 @@ int efivar_entry_set_safe(efi_char16_t *
{
const struct efivar_operations *ops;
efi_status_t status;
+ unsigned long varsize;
if (!__efivars)
return -EINVAL;
@@ -764,15 +765,17 @@ int efivar_entry_set_safe(efi_char16_t *
return efivar_entry_set_nonblocking(name, vendor, attributes,
size, data);
+ varsize = size + ucs2_strsize(name, 1024);
if (!block) {
if (down_trylock(&efivars_lock))
return -EBUSY;
+ status = check_var_size_nonblocking(attributes, varsize);
} else {
if (down_interruptible(&efivars_lock))
return -EINTR;
+ status = check_var_size(attributes, varsize);
}
- status = check_var_size(attributes, size + ucs2_strsize(name, 1024));
if (status != EFI_SUCCESS) {
up(&efivars_lock);
return -ENOSPC;
From: Sasha Neftin <[email protected]>
commit ffd24fa2fcc76ecb2e61e7a4ef8588177bcb42a6 upstream.
Update MAC type check e1000_pch_tgp because for e1000_pch_cnp,
NVM checksum update is still possible.
Emit a more detailed warning message.
Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1191663
Fixes: 4051f68318ca ("e1000e: Do not take care about recovery NVM checksum")
Reported-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Neftin <[email protected]>
Tested-by: Naama Meir <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/intel/e1000e/ich8lan.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -4134,9 +4134,9 @@ static s32 e1000_validate_nvm_checksum_i
return ret_val;
if (!(data & valid_csum_mask)) {
- e_dbg("NVM Checksum Invalid\n");
+ e_dbg("NVM Checksum valid bit not set\n");
- if (hw->mac.type < e1000_pch_cnp) {
+ if (hw->mac.type < e1000_pch_tgp) {
data |= valid_csum_mask;
ret_val = e1000_write_nvm(hw, word, 1, &data);
if (ret_val)
From: Maciej Fijalkowski <[email protected]>
commit 6c7273a266759d9d36f7c862149f248bcdeddc0f upstream.
Commit c685c69fba71 ("ixgbe: don't do any AF_XDP zero-copy transmit if
netif is not OK") addressed the ring transient state when
MEM_TYPE_XSK_BUFF_POOL was being configured which in turn caused the
interface to through down/up. Maurice reported that when carrier is not
ok and xsk_pool is present on ring pair, ksoftirqd will consume 100% CPU
cycles due to the constant NAPI rescheduling as ixgbe_poll() states that
there is still some work to be done.
To fix this, do not set work_done to false for a !netif_carrier_ok().
Fixes: c685c69fba71 ("ixgbe: don't do any AF_XDP zero-copy transmit if netif is not OK")
Reported-by: Maurice Baijens <[email protected]>
Tested-by: Maurice Baijens <[email protected]>
Signed-off-by: Maciej Fijalkowski <[email protected]>
Tested-by: Sandeep Penigalapati <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c
@@ -391,12 +391,14 @@ static bool ixgbe_xmit_zc(struct ixgbe_r
u32 cmd_type;
while (budget-- > 0) {
- if (unlikely(!ixgbe_desc_unused(xdp_ring)) ||
- !netif_carrier_ok(xdp_ring->netdev)) {
+ if (unlikely(!ixgbe_desc_unused(xdp_ring))) {
work_done = false;
break;
}
+ if (!netif_carrier_ok(xdp_ring->netdev))
+ break;
+
if (!xsk_tx_peek_desc(pool, &desc))
break;
From: Vincent Mailhol <[email protected]>
commit 035b0fcf02707d3c9c2890dc1484b11aa5335eb1 upstream.
The driver uses an atomic_t variable: gs_usb:active_channels to keep
track of the number of opened channels in order to only allocate
memory for the URBs when this count changes from zero to one.
However, the driver does not decrement the counter when an error
occurs in gs_can_open(). This issue is fixed by changing the type from
atomic_t to u8 and by simplifying the logic accordingly.
It is safe to use an u8 here because the network stack big kernel lock
(a.k.a. rtnl_mutex) is being hold. For details, please refer to [1].
[1] https://lore.kernel.org/linux-can/CAMZ6Rq+sHpiw34ijPsmp7vbUpDtJwvVtdV7CvRZJsLixjAFfrg@mail.gmail.com/T/#t
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Vincent Mailhol <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/can/usb/gs_usb.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/net/can/usb/gs_usb.c
+++ b/drivers/net/can/usb/gs_usb.c
@@ -190,8 +190,8 @@ struct gs_can {
struct gs_usb {
struct gs_can *canch[GS_MAX_INTF];
struct usb_anchor rx_submitted;
- atomic_t active_channels;
struct usb_device *udev;
+ u8 active_channels;
};
/* 'allocate' a tx context.
@@ -588,7 +588,7 @@ static int gs_can_open(struct net_device
if (rc)
return rc;
- if (atomic_add_return(1, &parent->active_channels) == 1) {
+ if (!parent->active_channels) {
for (i = 0; i < GS_MAX_RX_URBS; i++) {
struct urb *urb;
u8 *buf;
@@ -689,6 +689,7 @@ static int gs_can_open(struct net_device
dev->can.state = CAN_STATE_ERROR_ACTIVE;
+ parent->active_channels++;
if (!(dev->can.ctrlmode & CAN_CTRLMODE_LISTENONLY))
netif_start_queue(netdev);
@@ -704,7 +705,8 @@ static int gs_can_close(struct net_devic
netif_stop_queue(netdev);
/* Stop polling */
- if (atomic_dec_and_test(&parent->active_channels))
+ parent->active_channels--;
+ if (!parent->active_channels)
usb_kill_anchored_urbs(&parent->rx_submitted);
/* Stop sending URBs */
@@ -983,8 +985,6 @@ static int gs_usb_probe(struct usb_inter
init_usb_anchor(&dev->rx_submitted);
- atomic_set(&dev->active_channels, 0);
-
usb_set_intfdata(intf, dev);
dev->udev = interface_to_usbdev(intf);
From: Sven Eckelmann <[email protected]>
commit 6c1f41afc1dbe59d9d3c8bb0d80b749c119aa334 upstream.
The ifindex doesn't have to be unique for multiple network namespaces on
the same machine.
$ ip netns add test1
$ ip -net test1 link add dummy1 type dummy
$ ip netns add test2
$ ip -net test2 link add dummy2 type dummy
$ ip -net test1 link show dev dummy1
6: dummy1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 96:81:55:1e:dd:85 brd ff:ff:ff:ff:ff:ff
$ ip -net test2 link show dev dummy2
6: dummy2: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 5a:3c:af:35:07:c3 brd ff:ff:ff:ff:ff:ff
But the batman-adv code to walk through the various layers of virtual
interfaces uses this assumption because dev_get_iflink handles it
internally and doesn't return the actual netns of the iflink. And
dev_get_iflink only documents the situation where ifindex == iflink for
physical devices.
But only checking for dev->netdev_ops->ndo_get_iflink is also not an option
because ipoib_get_iflink implements it even when it sometimes returns an
iflink != ifindex and sometimes iflink == ifindex. The caller must
therefore make sure itself to check both netns and iflink + ifindex for
equality. Only when they are equal, a "physical" interface was detected
which should stop the traversal. On the other hand, vxcan_get_iflink can
also return 0 in case there was currently no valid peer. In this case, it
is still necessary to stop.
Fixes: b7eddd0b3950 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface")
Fixes: 5ed4a460a1d3 ("batman-adv: additional checks for virtual interfaces on top of WiFi")
Reported-by: Sabrina Dubroca <[email protected]>
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/batman-adv/hard-interface.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
--- a/net/batman-adv/hard-interface.c
+++ b/net/batman-adv/hard-interface.c
@@ -159,13 +159,15 @@ static bool batadv_is_on_batman_iface(co
return true;
iflink = dev_get_iflink(net_dev);
-
- /* no more parents..stop recursion */
- if (iflink == 0 || iflink == net_dev->ifindex)
+ if (iflink == 0)
return false;
parent_net = batadv_getlink_net(net_dev, net);
+ /* iflink to itself, most likely physical device */
+ if (net == parent_net && iflink == net_dev->ifindex)
+ return false;
+
/* recurse over the parent device */
parent_dev = __dev_get_by_index((struct net *)parent_net, iflink);
/* if we got a NULL parent_dev there is something broken.. */
@@ -225,8 +227,7 @@ static struct net_device *batadv_get_rea
return NULL;
iflink = dev_get_iflink(netdev);
-
- if (netdev->ifindex == iflink) {
+ if (iflink == 0) {
dev_hold(netdev);
return netdev;
}
@@ -237,6 +238,14 @@ static struct net_device *batadv_get_rea
net = dev_net(hard_iface->soft_iface);
real_net = batadv_getlink_net(netdev, net);
+
+ /* iflink to itself, most likely physical device */
+ if (net == real_net && netdev->ifindex == iflink) {
+ real_netdev = netdev;
+ dev_hold(real_netdev);
+ goto out;
+ }
+
real_netdev = dev_get_by_index(real_net, iflink);
out:
From: Sven Eckelmann <[email protected]>
commit 6116ba09423f7d140f0460be6a1644dceaad00da upstream.
There is no need to call dev_get_iflink multiple times for the same
net_device in batadv_get_real_netdevice. And since some of the
ndo_get_iflink callbacks are dynamic (for example via RCUs like in
vxcan_get_iflink), it could easily happen that the returned values are not
stable. The pre-checks before __dev_get_by_index are then of course bogus.
Fixes: 5ed4a460a1d3 ("batman-adv: additional checks for virtual interfaces on top of WiFi")
Signed-off-by: Sven Eckelmann <[email protected]>
Signed-off-by: Simon Wunderlich <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/batman-adv/hard-interface.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
--- a/net/batman-adv/hard-interface.c
+++ b/net/batman-adv/hard-interface.c
@@ -217,14 +217,16 @@ static struct net_device *batadv_get_rea
struct net_device *real_netdev = NULL;
struct net *real_net;
struct net *net;
- int ifindex;
+ int iflink;
ASSERT_RTNL();
if (!netdev)
return NULL;
- if (netdev->ifindex == dev_get_iflink(netdev)) {
+ iflink = dev_get_iflink(netdev);
+
+ if (netdev->ifindex == iflink) {
dev_hold(netdev);
return netdev;
}
@@ -234,9 +236,8 @@ static struct net_device *batadv_get_rea
goto out;
net = dev_net(hard_iface->soft_iface);
- ifindex = dev_get_iflink(netdev);
real_net = batadv_getlink_net(netdev, net);
- real_netdev = dev_get_by_index(real_net, ifindex);
+ real_netdev = dev_get_by_index(real_net, iflink);
out:
if (hard_iface)
From: Ville Syrjälä <[email protected]>
commit 08783aa7693f55619859f4f63f384abf17cb58c5 upstream.
This JSP2 PCH actually seems to be some special Apple
specific ICP variant rather than a JSP. Make it so. Or at
least all the references to it seem to be some Apple ICL
machines. Didn't manage to find these PCI IDs in any
public chipset docs unfortunately.
The only thing we're losing here with this JSP->ICP change
is Wa_14011294188, but based on the HSD that isn't actually
needed on any ICP based design (including JSP), only TGP
based stuff (including MCC) really need it. The documented
w/a just never made that distinction because Windows didn't
want to differentiate between JSP and MCC (not sure how
they handle hpd/ddc/etc. then though...).
Cc: [email protected]
Cc: Matt Roper <[email protected]>
Cc: Vivek Kasireddy <[email protected]>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4226
Fixes: 943682e3bd19 ("drm/i915: Introduce Jasper Lake PCH")
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Acked-by: Vivek Kasireddy <[email protected]>
Tested-by: Tomas Bzatek <[email protected]>
(cherry picked from commit 53581504a8e216d435f114a4f2596ad0dfd902fc)
Signed-off-by: Tvrtko Ursulin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_pch.c | 2 +-
drivers/gpu/drm/i915/intel_pch.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/i915/intel_pch.c
+++ b/drivers/gpu/drm/i915/intel_pch.c
@@ -110,6 +110,7 @@ intel_pch_type(const struct drm_i915_pri
/* Comet Lake V PCH is based on KBP, which is SPT compatible */
return PCH_SPT;
case INTEL_PCH_ICP_DEVICE_ID_TYPE:
+ case INTEL_PCH_ICP2_DEVICE_ID_TYPE:
drm_dbg_kms(&dev_priv->drm, "Found Ice Lake PCH\n");
drm_WARN_ON(&dev_priv->drm, !IS_ICELAKE(dev_priv));
return PCH_ICP;
@@ -124,7 +125,6 @@ intel_pch_type(const struct drm_i915_pri
!IS_ROCKETLAKE(dev_priv));
return PCH_TGP;
case INTEL_PCH_JSP_DEVICE_ID_TYPE:
- case INTEL_PCH_JSP2_DEVICE_ID_TYPE:
drm_dbg_kms(&dev_priv->drm, "Found Jasper Lake PCH\n");
drm_WARN_ON(&dev_priv->drm, !IS_ELKHARTLAKE(dev_priv));
return PCH_JSP;
--- a/drivers/gpu/drm/i915/intel_pch.h
+++ b/drivers/gpu/drm/i915/intel_pch.h
@@ -48,11 +48,11 @@ enum intel_pch {
#define INTEL_PCH_CMP2_DEVICE_ID_TYPE 0x0680
#define INTEL_PCH_CMP_V_DEVICE_ID_TYPE 0xA380
#define INTEL_PCH_ICP_DEVICE_ID_TYPE 0x3480
+#define INTEL_PCH_ICP2_DEVICE_ID_TYPE 0x3880
#define INTEL_PCH_MCC_DEVICE_ID_TYPE 0x4B00
#define INTEL_PCH_TGP_DEVICE_ID_TYPE 0xA080
#define INTEL_PCH_TGP2_DEVICE_ID_TYPE 0x4380
#define INTEL_PCH_JSP_DEVICE_ID_TYPE 0x4D80
-#define INTEL_PCH_JSP2_DEVICE_ID_TYPE 0x3880
#define INTEL_PCH_P2X_DEVICE_ID_TYPE 0x7100
#define INTEL_PCH_P3X_DEVICE_ID_TYPE 0x7000
#define INTEL_PCH_QEMU_DEVICE_ID_TYPE 0x2900 /* qemu q35 has 2918 */
From: Florian Westphal <[email protected]>
commit c3873070247d9e3c7a6b0cf9bf9b45e8018427b1 upstream.
Eric Dumazet says:
The sock_hold() side seems suspect, because there is no guarantee
that sk_refcnt is not already 0.
On failure, we cannot queue the packet and need to indicate an
error. The packet will be dropped by the caller.
v2: split skb prefetch hunk into separate change
Fixes: 271b72c7fa82c ("udp: RCU handling for Unicast packets.")
Reported-by: Eric Dumazet <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/net/netfilter/nf_queue.h | 2 +-
net/netfilter/nf_queue.c | 13 +++++++++----
net/netfilter/nfnetlink_queue.c | 12 +++++++++---
3 files changed, 19 insertions(+), 8 deletions(-)
--- a/include/net/netfilter/nf_queue.h
+++ b/include/net/netfilter/nf_queue.h
@@ -37,7 +37,7 @@ void nf_register_queue_handler(struct ne
void nf_unregister_queue_handler(struct net *net);
void nf_reinject(struct nf_queue_entry *entry, unsigned int verdict);
-void nf_queue_entry_get_refs(struct nf_queue_entry *entry);
+bool nf_queue_entry_get_refs(struct nf_queue_entry *entry);
void nf_queue_entry_free(struct nf_queue_entry *entry);
static inline void init_hashrandom(u32 *jhash_initval)
--- a/net/netfilter/nf_queue.c
+++ b/net/netfilter/nf_queue.c
@@ -100,16 +100,17 @@ static void __nf_queue_entry_init_physde
}
/* Bump dev refs so they don't vanish while packet is out */
-void nf_queue_entry_get_refs(struct nf_queue_entry *entry)
+bool nf_queue_entry_get_refs(struct nf_queue_entry *entry)
{
struct nf_hook_state *state = &entry->state;
+ if (state->sk && !refcount_inc_not_zero(&state->sk->sk_refcnt))
+ return false;
+
if (state->in)
dev_hold(state->in);
if (state->out)
dev_hold(state->out);
- if (state->sk)
- sock_hold(state->sk);
#if IS_ENABLED(CONFIG_BRIDGE_NETFILTER)
if (entry->physin)
@@ -117,6 +118,7 @@ void nf_queue_entry_get_refs(struct nf_q
if (entry->physout)
dev_hold(entry->physout);
#endif
+ return true;
}
EXPORT_SYMBOL_GPL(nf_queue_entry_get_refs);
@@ -205,7 +207,10 @@ static int __nf_queue(struct sk_buff *sk
__nf_queue_entry_init_physdevs(entry);
- nf_queue_entry_get_refs(entry);
+ if (!nf_queue_entry_get_refs(entry)) {
+ kfree(entry);
+ return -ENOTCONN;
+ }
switch (entry->state.pf) {
case AF_INET:
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -712,9 +712,15 @@ static struct nf_queue_entry *
nf_queue_entry_dup(struct nf_queue_entry *e)
{
struct nf_queue_entry *entry = kmemdup(e, e->size, GFP_ATOMIC);
- if (entry)
- nf_queue_entry_get_refs(entry);
- return entry;
+
+ if (!entry)
+ return NULL;
+
+ if (nf_queue_entry_get_refs(entry))
+ return entry;
+
+ kfree(entry);
+ return NULL;
}
#if IS_ENABLED(CONFIG_BRIDGE_NETFILTER)
From: Florian Westphal <[email protected]>
commit 3b836da4081fa585cf6c392f62557496f2cb0efe upstream.
In case someone combines bpf socket assign and nf_queue, then we will
queue an skb who references a struct sock that did not have its
reference count incremented.
As we leave rcu protection, there is no guarantee that skb->sk is still
valid.
For refcount-less skb->sk case, try to increment the reference count
and then override the destructor.
In case of failure we have two choices: orphan the skb and 'delete'
preselect or let nf_queue() drop the packet.
Do the latter, it should not happen during normal operation.
Fixes: cf7fbe660f2d ("bpf: Add socket assign support")
Acked-by: Joe Stringer <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netfilter/nf_queue.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/net/netfilter/nf_queue.c
+++ b/net/netfilter/nf_queue.c
@@ -189,6 +189,18 @@ static int __nf_queue(struct sk_buff *sk
break;
}
+ if (skb_sk_is_prefetched(skb)) {
+ struct sock *sk = skb->sk;
+
+ if (!sk_is_refcounted(sk)) {
+ if (!refcount_inc_not_zero(&sk->sk_refcnt))
+ return -ENOTCONN;
+
+ /* drop refcount on skb_orphan */
+ skb->destructor = sock_edemux;
+ }
+ }
+
entry = kmalloc(sizeof(*entry) + route_key_size, GFP_ATOMIC);
if (!entry)
return -ENOMEM;
From: Sidong Yang <[email protected]>
commit d4aef1e122d8bbdc15ce3bd0bc813d6b44a7d63a upstream.
The commit e804861bd4e6 ("btrfs: fix deadlock between quota disable and
qgroup rescan worker") by Kawasaki resolves deadlock between quota
disable and qgroup rescan worker. But also there is a deadlock case like
it. It's about enabling or disabling quota and creating or removing
qgroup. It can be reproduced in simple script below.
for i in {1..100}
do
btrfs quota enable /mnt &
btrfs qgroup create 1/0 /mnt &
btrfs qgroup destroy 1/0 /mnt &
btrfs quota disable /mnt &
done
Here's why the deadlock happens:
1) The quota rescan task is running.
2) Task A calls btrfs_quota_disable(), locks the qgroup_ioctl_lock
mutex, and then calls btrfs_qgroup_wait_for_completion(), to wait for
the quota rescan task to complete.
3) Task B calls btrfs_remove_qgroup() and it blocks when trying to lock
the qgroup_ioctl_lock mutex, because it's being held by task A. At that
point task B is holding a transaction handle for the current transaction.
4) The quota rescan task calls btrfs_commit_transaction(). This results
in it waiting for all other tasks to release their handles on the
transaction, but task B is blocked on the qgroup_ioctl_lock mutex
while holding a handle on the transaction, and that mutex is being held
by task A, which is waiting for the quota rescan task to complete,
resulting in a deadlock between these 3 tasks.
To resolve this issue, the thread disabling quota should unlock
qgroup_ioctl_lock before waiting rescan completion. Move
btrfs_qgroup_wait_for_completion() after unlock of qgroup_ioctl_lock.
Fixes: e804861bd4e6 ("btrfs: fix deadlock between quota disable and qgroup rescan worker")
CC: [email protected] # 5.4+
Reviewed-by: Filipe Manana <[email protected]>
Reviewed-by: Shin'ichiro Kawasaki <[email protected]>
Signed-off-by: Sidong Yang <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/qgroup.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -1198,13 +1198,20 @@ int btrfs_quota_disable(struct btrfs_fs_
goto out;
/*
+ * Unlock the qgroup_ioctl_lock mutex before waiting for the rescan worker to
+ * complete. Otherwise we can deadlock because btrfs_remove_qgroup() needs
+ * to lock that mutex while holding a transaction handle and the rescan
+ * worker needs to commit a transaction.
+ */
+ mutex_unlock(&fs_info->qgroup_ioctl_lock);
+
+ /*
* Request qgroup rescan worker to complete and wait for it. This wait
* must be done before transaction start for quota disable since it may
* deadlock with transaction by the qgroup rescan worker.
*/
clear_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags);
btrfs_qgroup_wait_for_completion(fs_info, false);
- mutex_unlock(&fs_info->qgroup_ioctl_lock);
/*
* 1 For the root item
From: David Gow <[email protected]>
commit ba115adf61b36b8c167126425a62b0efc23f72c0 upstream.
Make the samsung-keypad driver explicitly depend on CONFIG_HAS_IOMEM, as it
calls devm_ioremap(). This prevents compile errors in some configs (e.g,
allyesconfig/randconfig under UML):
/usr/bin/ld: drivers/input/keyboard/samsung-keypad.o: in function `samsung_keypad_probe':
samsung-keypad.c:(.text+0xc60): undefined reference to `devm_ioremap'
Signed-off-by: David Gow <[email protected]>
Acked-by: anton ivanov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/input/keyboard/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -556,7 +556,7 @@ config KEYBOARD_PMIC8XXX
config KEYBOARD_SAMSUNG
tristate "Samsung keypad support"
- depends on HAVE_CLK
+ depends on HAS_IOMEM && HAVE_CLK
select INPUT_MATRIXKMAP
help
Say Y here if you want to use the keypad on your Samsung mobile
On Mon, 7 Mar 2022 10:18:03 +0100, Greg Kroah-Hartman <[email protected]> wrote:
> This is the start of the stable review cycle for the 5.10.104 release.
> There are 105 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 09 Mar 2022 09:16:25 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.104-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
5.10.104-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
Tested-by: Fox Chen <[email protected]>
Hi!
> This is the start of the stable review cycle for the 5.10.104 release.
> There are 105 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
CIP testing did not find any problems here:
https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/tree/linux-5.10.y
Tested-by: Pavel Machek (CIP) <[email protected]>
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On 3/7/22 1:18 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.104 release.
> There are 105 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 09 Mar 2022 09:16:25 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.104-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:
Tested-by: Florian Fainelli <[email protected]>
--
Florian
On 3/7/22 01:18, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.10.104 release.
> There are 105 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 09 Mar 2022 09:16:25 +0000.
> Anything received after that time might be too late.
>
Building powerpc:allmodconfig ... failed
In file included from include/linux/module.h:12,
from drivers/net/ethernet/ibm/ibmvnic.c:35:
drivers/net/ethernet/ibm/ibmvnic.c: In function 'ibmvnic_reset':
drivers/net/ethernet/ibm/ibmvnic.c:2349:23: error: 'entry' undeclared
On Mon, Mar 07, 2022 at 06:15:02AM -0800, Guenter Roeck wrote:
> On 3/7/22 01:18, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 5.10.104 release.
> > There are 105 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed, 09 Mar 2022 09:16:25 +0000.
> > Anything received after that time might be too late.
> >
>
>
> Building powerpc:allmodconfig ... failed
>
> In file included from include/linux/module.h:12,
> from drivers/net/ethernet/ibm/ibmvnic.c:35:
> drivers/net/ethernet/ibm/ibmvnic.c: In function 'ibmvnic_reset':
> drivers/net/ethernet/ibm/ibmvnic.c:2349:23: error: 'entry' undeclared
I'll go drop the offending patch, thanks!
greg k-h
On Wed, Mar 09, 2022 at 11:54:20AM +0100, Pavel Machek wrote:
> Hi!
>
> > From: Yongzhi Liu <[email protected]>
> >
> > [ Upstream commit 455896c53d5b803733ddd84e1bf8a430644439b6 ]
> >
> > pm_runtime_get_() increments the runtime PM usage counter even
> > when it returns an error code, thus a matching decrement is needed on
> > the error handling path to keep the counter balanced.
>
> This patch will break things.
>
> Notice that -ret is ignored (checked 4.4 and 5.10), so we don't
> actually abort/return error; we just printk. We'll do two
> pm_runtime_put's after the "fix".
>
> Please drop from -stable.
>
> It was discussed during AUTOSEL review:
>
> Date: Fri, 25 Feb 2022 14:25:10 +0800 (GMT+08:00)
> From: 刘永志 <[email protected]>
> To: pavel machek <[email protected]>
> Cc: sasha levin <[email protected]>, [email protected],
> Subject: Re: [PATCH AUTOSEL 5.16 24/30] dmaengine: shdma: Fix runtime PM
> imbalance on error
So 5.15 and 5.16 is ok, but older is not?
thanks,
greg k-h
Hi!
> From: Yongzhi Liu <[email protected]>
>
> [ Upstream commit 455896c53d5b803733ddd84e1bf8a430644439b6 ]
>
> pm_runtime_get_() increments the runtime PM usage counter even
> when it returns an error code, thus a matching decrement is needed on
> the error handling path to keep the counter balanced.
This patch will break things.
Notice that -ret is ignored (checked 4.4 and 5.10), so we don't
actually abort/return error; we just printk. We'll do two
pm_runtime_put's after the "fix".
Please drop from -stable.
It was discussed during AUTOSEL review:
Date: Fri, 25 Feb 2022 14:25:10 +0800 (GMT+08:00)
From: 刘永志 <[email protected]>
To: pavel machek <[email protected]>
Cc: sasha levin <[email protected]>, [email protected],
Subject: Re: [PATCH AUTOSEL 5.16 24/30] dmaengine: shdma: Fix runtime PM
imbalance on error
Best regards,
Pavel
> +++ b/drivers/dma/sh/shdma-base.c
> @@ -115,8 +115,10 @@ static dma_cookie_t shdma_tx_submit(struct dma_async_tx_descriptor *tx)
> ret = pm_runtime_get(schan->dev);
>
> spin_unlock_irq(&schan->chan_lock);
> - if (ret < 0)
> + if (ret < 0) {
> dev_err(schan->dev, "%s(): GET = %d\n", __func__, ret);
> + pm_runtime_put(schan->dev);
> + }
>
> pm_runtime_barrier(schan->dev);
>
> --
> 2.34.1
>
>
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Wed 2022-03-09 12:58:46, Greg Kroah-Hartman wrote:
> On Wed, Mar 09, 2022 at 11:54:20AM +0100, Pavel Machek wrote:
> > Hi!
> >
> > > From: Yongzhi Liu <[email protected]>
> > >
> > > [ Upstream commit 455896c53d5b803733ddd84e1bf8a430644439b6 ]
> > >
> > > pm_runtime_get_() increments the runtime PM usage counter even
> > > when it returns an error code, thus a matching decrement is needed on
> > > the error handling path to keep the counter balanced.
> >
> > This patch will break things.
> >
> > Notice that -ret is ignored (checked 4.4 and 5.10), so we don't
> > actually abort/return error; we just printk. We'll do two
> > pm_runtime_put's after the "fix".
> >
> > Please drop from -stable.
> >
> > It was discussed during AUTOSEL review:
> >
> > Date: Fri, 25 Feb 2022 14:25:10 +0800 (GMT+08:00)
> > From: 刘永志 <[email protected]>
> > To: pavel machek <[email protected]>
> > Cc: sasha levin <[email protected]>, [email protected],
> > Subject: Re: [PATCH AUTOSEL 5.16 24/30] dmaengine: shdma: Fix runtime PM
> > imbalance on error
>
> So 5.15 and 5.16 is ok, but older is not?
I believe commit is wrong for mainline and all stable releases, and
author seems to agree. Drop from everywhere.
(And sorry for confusion, I concentrate on 5.10/4.19; that's why mail
was ambiguous).
Best regards,
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Wed 2022-03-09 14:40:56, Greg Kroah-Hartman wrote:
> On Wed, Mar 09, 2022 at 01:35:09PM +0100, Pavel Machek wrote:
> > On Wed 2022-03-09 12:58:46, Greg Kroah-Hartman wrote:
> > > On Wed, Mar 09, 2022 at 11:54:20AM +0100, Pavel Machek wrote:
> > > > Hi!
> > > >
> > > > > From: Yongzhi Liu <[email protected]>
> > > > >
> > > > > [ Upstream commit 455896c53d5b803733ddd84e1bf8a430644439b6 ]
> > > > >
> > > > > pm_runtime_get_() increments the runtime PM usage counter even
> > > > > when it returns an error code, thus a matching decrement is needed on
> > > > > the error handling path to keep the counter balanced.
> > > >
> > > > This patch will break things.
> > > >
> > > > Notice that -ret is ignored (checked 4.4 and 5.10), so we don't
> > > > actually abort/return error; we just printk. We'll do two
> > > > pm_runtime_put's after the "fix".
> > > >
> > > > Please drop from -stable.
> > > >
> > > > It was discussed during AUTOSEL review:
> > > >
> > > > Date: Fri, 25 Feb 2022 14:25:10 +0800 (GMT+08:00)
> > > > From: 刘永志 <[email protected]>
> > > > To: pavel machek <[email protected]>
> > > > Cc: sasha levin <[email protected]>, [email protected],
> > > > Subject: Re: [PATCH AUTOSEL 5.16 24/30] dmaengine: shdma: Fix runtime PM
> > > > imbalance on error
> > >
> > > So 5.15 and 5.16 is ok, but older is not?
> >
> > I believe commit is wrong for mainline and all stable releases, and
> > author seems to agree. Drop from everywhere.
>
> Is it reverted in Linus's tree yet?
It will take you a minute to check.
Take a look at the patch. There's no return in error path, thus doing
runtime_put is clearly bogus. Should take you less than minute to
verify.
Please drop the patch.
Pavel
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
On Wed, Mar 09, 2022 at 01:35:09PM +0100, Pavel Machek wrote:
> On Wed 2022-03-09 12:58:46, Greg Kroah-Hartman wrote:
> > On Wed, Mar 09, 2022 at 11:54:20AM +0100, Pavel Machek wrote:
> > > Hi!
> > >
> > > > From: Yongzhi Liu <[email protected]>
> > > >
> > > > [ Upstream commit 455896c53d5b803733ddd84e1bf8a430644439b6 ]
> > > >
> > > > pm_runtime_get_() increments the runtime PM usage counter even
> > > > when it returns an error code, thus a matching decrement is needed on
> > > > the error handling path to keep the counter balanced.
> > >
> > > This patch will break things.
> > >
> > > Notice that -ret is ignored (checked 4.4 and 5.10), so we don't
> > > actually abort/return error; we just printk. We'll do two
> > > pm_runtime_put's after the "fix".
> > >
> > > Please drop from -stable.
> > >
> > > It was discussed during AUTOSEL review:
> > >
> > > Date: Fri, 25 Feb 2022 14:25:10 +0800 (GMT+08:00)
> > > From: 刘永志 <[email protected]>
> > > To: pavel machek <[email protected]>
> > > Cc: sasha levin <[email protected]>, [email protected],
> > > Subject: Re: [PATCH AUTOSEL 5.16 24/30] dmaengine: shdma: Fix runtime PM
> > > imbalance on error
> >
> > So 5.15 and 5.16 is ok, but older is not?
>
> I believe commit is wrong for mainline and all stable releases, and
> author seems to agree. Drop from everywhere.
Is it reverted in Linus's tree yet?
thanks,
greg k-h
On Wed, Mar 09, 2022 at 02:57:08PM +0100, Pavel Machek wrote:
> On Wed 2022-03-09 14:40:56, Greg Kroah-Hartman wrote:
> > On Wed, Mar 09, 2022 at 01:35:09PM +0100, Pavel Machek wrote:
> > > On Wed 2022-03-09 12:58:46, Greg Kroah-Hartman wrote:
> > > > On Wed, Mar 09, 2022 at 11:54:20AM +0100, Pavel Machek wrote:
> > > > > Hi!
> > > > >
> > > > > > From: Yongzhi Liu <[email protected]>
> > > > > >
> > > > > > [ Upstream commit 455896c53d5b803733ddd84e1bf8a430644439b6 ]
> > > > > >
> > > > > > pm_runtime_get_() increments the runtime PM usage counter even
> > > > > > when it returns an error code, thus a matching decrement is needed on
> > > > > > the error handling path to keep the counter balanced.
> > > > >
> > > > > This patch will break things.
> > > > >
> > > > > Notice that -ret is ignored (checked 4.4 and 5.10), so we don't
> > > > > actually abort/return error; we just printk. We'll do two
> > > > > pm_runtime_put's after the "fix".
> > > > >
> > > > > Please drop from -stable.
> > > > >
> > > > > It was discussed during AUTOSEL review:
> > > > >
> > > > > Date: Fri, 25 Feb 2022 14:25:10 +0800 (GMT+08:00)
> > > > > From: 刘永志 <[email protected]>
> > > > > To: pavel machek <[email protected]>
> > > > > Cc: sasha levin <[email protected]>, [email protected],
> > > > > Subject: Re: [PATCH AUTOSEL 5.16 24/30] dmaengine: shdma: Fix runtime PM
> > > > > imbalance on error
> > > >
> > > > So 5.15 and 5.16 is ok, but older is not?
> > >
> > > I believe commit is wrong for mainline and all stable releases, and
> > > author seems to agree. Drop from everywhere.
> >
> > Is it reverted in Linus's tree yet?
>
> It will take you a minute to check.
>
> Take a look at the patch. There's no return in error path, thus doing
> runtime_put is clearly bogus. Should take you less than minute to
> verify.
>
> Please drop the patch.
I want to have it reverted in Linus's tree as well, otherwise that's a
regression that people will hit.
thanks,
greg k-h
On 09-03-22, 15:48, Greg Kroah-Hartman wrote:
> On Wed, Mar 09, 2022 at 02:57:08PM +0100, Pavel Machek wrote:
> > On Wed 2022-03-09 14:40:56, Greg Kroah-Hartman wrote:
> > > On Wed, Mar 09, 2022 at 01:35:09PM +0100, Pavel Machek wrote:
> > > > On Wed 2022-03-09 12:58:46, Greg Kroah-Hartman wrote:
> > > > > On Wed, Mar 09, 2022 at 11:54:20AM +0100, Pavel Machek wrote:
> > > > > > Hi!
> > > > > >
> > > > > > > From: Yongzhi Liu <[email protected]>
> > > > > > >
> > > > > > > [ Upstream commit 455896c53d5b803733ddd84e1bf8a430644439b6 ]
> > > > > > >
> > > > > > > pm_runtime_get_() increments the runtime PM usage counter even
> > > > > > > when it returns an error code, thus a matching decrement is needed on
> > > > > > > the error handling path to keep the counter balanced.
> > > > > >
> > > > > > This patch will break things.
> > > > > >
> > > > > > Notice that -ret is ignored (checked 4.4 and 5.10), so we don't
> > > > > > actually abort/return error; we just printk. We'll do two
> > > > > > pm_runtime_put's after the "fix".
> > > > > >
> > > > > > Please drop from -stable.
> > > > > >
> > > > > > It was discussed during AUTOSEL review:
> > > > > >
> > > > > > Date: Fri, 25 Feb 2022 14:25:10 +0800 (GMT+08:00)
> > > > > > From: 刘永志 <[email protected]>
> > > > > > To: pavel machek <[email protected]>
> > > > > > Cc: sasha levin <[email protected]>, [email protected],
> > > > > > Subject: Re: [PATCH AUTOSEL 5.16 24/30] dmaengine: shdma: Fix runtime PM
> > > > > > imbalance on error
> > > > >
> > > > > So 5.15 and 5.16 is ok, but older is not?
> > > >
> > > > I believe commit is wrong for mainline and all stable releases, and
> > > > author seems to agree. Drop from everywhere.
> > >
> > > Is it reverted in Linus's tree yet?
> >
> > It will take you a minute to check.
> >
> > Take a look at the patch. There's no return in error path, thus doing
> > runtime_put is clearly bogus. Should take you less than minute to
> > verify.
> >
> > Please drop the patch.
>
> I want to have it reverted in Linus's tree as well, otherwise that's a
> regression that people will hit.
I have reverted now, it will be in -next tomorrow and in mainline during
upcoming merge window
--
~Vinod
On Thu, Mar 10, 2022 at 10:05:44AM +0530, Vinod Koul wrote:
> On 09-03-22, 15:48, Greg Kroah-Hartman wrote:
> > On Wed, Mar 09, 2022 at 02:57:08PM +0100, Pavel Machek wrote:
> > > On Wed 2022-03-09 14:40:56, Greg Kroah-Hartman wrote:
> > > > On Wed, Mar 09, 2022 at 01:35:09PM +0100, Pavel Machek wrote:
> > > > > On Wed 2022-03-09 12:58:46, Greg Kroah-Hartman wrote:
> > > > > > On Wed, Mar 09, 2022 at 11:54:20AM +0100, Pavel Machek wrote:
> > > > > > > Hi!
> > > > > > >
> > > > > > > > From: Yongzhi Liu <[email protected]>
> > > > > > > >
> > > > > > > > [ Upstream commit 455896c53d5b803733ddd84e1bf8a430644439b6 ]
> > > > > > > >
> > > > > > > > pm_runtime_get_() increments the runtime PM usage counter even
> > > > > > > > when it returns an error code, thus a matching decrement is needed on
> > > > > > > > the error handling path to keep the counter balanced.
> > > > > > >
> > > > > > > This patch will break things.
> > > > > > >
> > > > > > > Notice that -ret is ignored (checked 4.4 and 5.10), so we don't
> > > > > > > actually abort/return error; we just printk. We'll do two
> > > > > > > pm_runtime_put's after the "fix".
> > > > > > >
> > > > > > > Please drop from -stable.
> > > > > > >
> > > > > > > It was discussed during AUTOSEL review:
> > > > > > >
> > > > > > > Date: Fri, 25 Feb 2022 14:25:10 +0800 (GMT+08:00)
> > > > > > > From: 刘永志 <[email protected]>
> > > > > > > To: pavel machek <[email protected]>
> > > > > > > Cc: sasha levin <[email protected]>, [email protected],
> > > > > > > Subject: Re: [PATCH AUTOSEL 5.16 24/30] dmaengine: shdma: Fix runtime PM
> > > > > > > imbalance on error
> > > > > >
> > > > > > So 5.15 and 5.16 is ok, but older is not?
> > > > >
> > > > > I believe commit is wrong for mainline and all stable releases, and
> > > > > author seems to agree. Drop from everywhere.
> > > >
> > > > Is it reverted in Linus's tree yet?
> > >
> > > It will take you a minute to check.
> > >
> > > Take a look at the patch. There's no return in error path, thus doing
> > > runtime_put is clearly bogus. Should take you less than minute to
> > > verify.
> > >
> > > Please drop the patch.
> >
> > I want to have it reverted in Linus's tree as well, otherwise that's a
> > regression that people will hit.
>
> I have reverted now, it will be in -next tomorrow and in mainline during
> upcoming merge window
Thanks, now queued up.
greg k-h