This patchset enables CXL RCH error handling. This is necessary because RCH
downstream port protocol error handling is implemented uniquely and not
currently supported. These patches address the following:
* Discovery and mapping of RCH downstream port AER registers.
* AER portdrv changes to support CXL RCH protocol errors.
* Interrupt setup specific to RCH mode: enabling RCEC internal
errors and disabling root port interrupts.
Changes in V8:
- Rebased onto: commit
0c0df63177e3 ("Merge branch 'for-6.5/cxl-rch-eh' into for-6.5/cxl")
- cxl/port: Pre-initialize component register mappings
- Added patch to pre-initialize component register mappings.
- cxl/pci: Remove Component Register base address from
- Separated removal of Component Register base address in struct
cxl_dev_state to not break functionality.
- cxl/hdm: Use stored Component Register mappings to map HDM decoder
capability
- Implemented a less strict check in devm_cxl_setup_hdm(), be tolerant
if HDM decoder registers are not implemented.
- cxl/pci: Map RCH downstream AER registers for logging protocol errors
- Fixed uninitialized access of map->dev in cxl_dport_map_regs().
- PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem
dev handler
- Fix typo in patch description.
- cxl/pci: Update CXL error logging to use RAS register address
- Fix typo in patch description.
Changes in V7:
- cxl: Updates for CXL Test to work with RCH
- Removed Robert's DSO.
- cxl/core/regs: Add @dev to cxl_register_map
- Corrected typo in patch description.
- PCI/AER: Unmask RCEC internal errors to enable RCH downstream port
error handling.
- Changed int variable to bool.
- cxl/pci: Map RCH downstream AER registers for logging protocol errors
- Corrected patch description.
- cxl/pci: Add RCH downstream port AER register discovery
- Reverted empty line removal.
- cxl/port: Store the port's Component Register mappings in struct
cxl_port
- Update to use structure initialization in cxl_setup_comp_regs().
- Remove first patch (already in the tree) and added patch 27/27.
- Was a one-off error caused when merging branches during internal
review.
Changes in V6:
- Added patch for cxl test fixes: 'cxl: Update CXl Test to Work with
RCH'. Patch from Dan.
- Simplified: 'cxl/rch: Prepare for caching the MMIO mapped PCIe AER
capability'. Patch from Dan.
- Added patch: 'cxl: Rename 'uport' to 'uport_dev''
- Updated patch: 'cxl: Rename member @dport of struct cxl_dport to
@dport_dev'
- Updated *map assignment to use structure init in 'cxl/core/regs: Add
@dev to cxl_register_map'. Also fixed whitespace.
- Removed extra whitespace in 'cxl/core/regs: Add @dev to
cxl_register_map'
- Updated patch subject: 'cxl/acpi: Move add_host_bridge_uport() after
cxl_get_chbs()'
- Changes to work with CXL test. 'cxl/acpi: Directly bind the CEDT
detected CHBCR to the Host Bridge's port'
- 'cxl/pci: Early setup RCH dport component registers from RCRB'
- Removed parameter from cxl_rcrb_get_comp_regs().
- Changed return value to EPROBE_DEFER for retry during ACPI
initialization.
- Changed map to us struct initialization.
- Remove ENODEV check in 'cxl/port: Store the downstream port's
Component Register mappings in struct cxl_dport'
- 'cxl/port: Remove Component Register base address from struct
cxl_dport'
- Moved earlier with same removal for cxl_port.
- cxl/pci: Add RCH downstream port AER register discovery
- Flattened {request,release}_mem_region() and ioremap() into
cxl_rcrb_to_aer().
- Add check if OS is assigned AER handling before discovering AER.
- Added CXL namespace import to cxl_core (drivers/cxl/core/port.c).
Needed for using pci_print_aer(). In 'PCI/AER: Refactor
cper_print_aer() for use by CXL driver module'.
- cxl/pci: Map RCH downstream AER registers for logging protocol errors
- Changed dport device used in devm_cxl_iomap_block() call to be
port->dev.
- Removed ENODEV check.
- cxl/pci: Disable root port interrupts in RCH mode
- Removed unnecessary 'rch' check.
- Moved cxl_disable_rch_root_ints() into core/pci.c.
- Added OSC AER assignment check before accessing AER registers.
- cxl/pci: Update CXL error logging to use RAS register address
- Renamed function handlers.
- cxl/pci: Add RCH downstream port error logging
- Moved RCD check to caller.
- Added put_dev() after call to cxl_pci_find_port().
Changes in V5:
- Split 'cxl/rch: Prepare for logging RCH downstream port protocol
errors' patch into 2 patches.
- Added:
cxl/core/regs: Rename phys_addr in cxl_map_component_regs()
cxl/mem: Prepare for early RCH dport component register setup
- Correct comments CXL3.0 to CXL 3.0.
- changed cxl_port_get_comp_map() to static.
Changes in V4:
- Made port RAS register discovery common and called from
__devm_cxl_add_dport().
- Changed RCH AER register discovery to be called from
__devm_cxl_add_dport().
- Changed RAS and RCH AER register mapping to be called from
__devm_cxl_add_dport().
- Changed component register mapping to support all CXL component
mapping, cxl_map_component_regs().
- Added cxl_regs to 'struct cxl_dport' for providing RCH downstream port
mapped registers USED in error handler.
- PCI/AER:
- Improved description of PCIEAER_CXL option in Kconfig.
- Renamed function to pci_aer_unmask_internal_errors(), added
pcie_aer_is_native() check.
- Improved comments and added spec refs.
- Renamed functions to cxl_rch_handle_error*().
- Modified cxl_rch_handle_error_iter() to only call the handler
callbacks, this also simplifies refcounting of the pdev.
- Refactored handle_error_source(), created pci_aer_handle_error().
- Changed printk messages to pci_*() variants.
- Added check for pcie_aer_is_native() to the RCEC.
- Introduced function cxl_rch_enable_rcec().
- Updated patch description ("PCI/AER: Forward RCH downstream
port-detected errors to the CXL.mem dev handler").
Changes in V3:
- Correct base commit in cover sheet.
- Change hardcoded return 0 to NULL in regs.c.
- Remove calls to pci_disable_pcie_error_reporting(pdev) and
pci_enable_pcie_error_reporting(pdev) in mem.c;
- Move RCEC interrupt unmask to PCIe port AER driver's probe.
- Fixes missing PCIEAER and PCIEPORTBUS config option error.
- Rename cxl_rcrb_setup() to cxl_setup_rcrb() in mem.c.
- Update cper_mem_err_unpack() patch subject and description.
Changes in V2:
- Refactor RCH initialization into cxl_mem driver.
- Includes RCH RAS and AER register discovery and mapping.
- Add RCEC protocol error interrupt forwarding to CXL endpoint
handler.
- Change AER and RAS logging to use existing trace routines.
- Enable RCEC AER internal errors.
Robert Richter (8):
cxl/port: Pre-initialize component register mappings
cxl/pci: Store the endpoint's Component Register mappings in struct
cxl_dev_state
cxl/hdm: Use stored Component Register mappings to map HDM decoder
capability
cxl/pci: Remove Component Register base address from struct
cxl_dev_state
cxl/port: Remove Component Register base address from struct cxl_port
PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem
dev handler
PCI/AER: Unmask RCEC internal errors to enable RCH downstream port
error handling
cxl/core/regs: Rename phys_addr in cxl_map_component_regs()
Terry Bowman (6):
cxl/pci: Add RCH downstream port AER register discovery
PCI/AER: Refactor cper_print_aer() for use by CXL driver module
cxl/pci: Update CXL error logging to use RAS register address
cxl/pci: Map RCH downstream AER registers for logging protocol errors
cxl/pci: Add RCH downstream port error logging
cxl/pci: Disable root port interrupts in RCH mode
base-commit: 0c0df63177e37ae826d803280eb2c5b6b6a7a9a4
drivers/cxl/core/core.h | 7 ++
drivers/cxl/core/hdm.c | 64 +++++++------
drivers/cxl/core/pci.c | 174 ++++++++++++++++++++++++++++++++---
drivers/cxl/core/port.c | 58 ++++++++++--
drivers/cxl/core/regs.c | 42 ++++++++-
drivers/cxl/cxl.h | 14 ++-
drivers/cxl/cxlmem.h | 4 +-
drivers/cxl/mem.c | 4 +-
drivers/cxl/pci.c | 10 +-
drivers/pci/pcie/Kconfig | 12 +++
drivers/pci/pcie/aer.c | 162 ++++++++++++++++++++++++++++++--
include/linux/aer.h | 2 +-
tools/testing/cxl/test/mem.c | 1 -
13 files changed, 481 insertions(+), 73 deletions(-)
--
2.34.1
From: Robert Richter <[email protected]>
In Restricted CXL Device (RCD) mode a CXL device is exposed as an
RCiEP, but CXL downstream and upstream ports are not enumerated and
not visible in the PCIe hierarchy. [1] Protocol and link errors from
these non-enumerated ports are signaled as internal AER errors, either
Uncorrectable Internal Error (UIE) or Corrected Internal Errors (CIE)
via an RCEC.
Restricted CXL host (RCH) downstream port-detected errors have the
Requester ID of the RCEC set in the RCEC's AER Error Source ID
register. A CXL handler must then inspect the error status in various
CXL registers residing in the dport's component register space (CXL
RAS capability) or the dport's RCRB (PCIe AER extended
capability). [2]
Errors showing up in the RCEC's error handler must be handled and
connected to the CXL subsystem. Implement this by forwarding the error
to all CXL devices below the RCEC. Since the entire CXL device is
controlled only using PCIe Configuration Space of device 0, function
0, only pass it there [3]. The error handling is limited to currently
supported devices with the Memory Device class code set (CXL Type 3
Device, PCI_CLASS_MEMORY_CXL, 502h), handle downstream port errors in
the device's cxl_pci driver. Support for other CXL Device Types
(e.g. a CXL.cache Device) can be added later.
To handle downstream port errors in addition to errors directed to the
CXL endpoint device, a handler must also inspect the CXL RAS and PCIe
AER capabilities of the CXL downstream port the device is connected
to.
Since CXL downstream port errors are signaled using internal errors,
the handler requires those errors to be unmasked. This is subject of a
follow-on patch.
The reason for choosing this implementation is that the AER service
driver claims the RCEC device, but does not allow it to register a
custom specific handler to support CXL. Connecting the RCEC hard-wired
with a CXL handler does not work, as the CXL subsystem might not be
present all the time. The alternative to add an implementation to the
portdrv to allow the registration of a custom RCEC error handler isn't
worth doing it as CXL would be its only user. Instead, just check for
an CXL RCEC and pass it down to the connected CXL device's error
handler. With this approach the code can entirely be implemented in
the PCIe AER driver and is independent of the CXL subsystem. The CXL
driver only provides the handler.
[1] CXL 3.0 spec: 9.11.8 CXL Devices Attached to an RCH
[2] CXL 3.0 spec, 12.2.1.1 RCH Downstream Port-detected Errors
[3] CXL 3.0 spec, 8.1.3 PCIe DVSEC for CXL Devices
Co-developed-by: Terry Bowman <[email protected]>
Signed-off-by: Terry Bowman <[email protected]>
Signed-off-by: Robert Richter <[email protected]>
Cc: "Oliver O'Halloran" <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: [email protected]
Cc: [email protected]
Acked-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
---
drivers/pci/pcie/Kconfig | 12 +++++
drivers/pci/pcie/aer.c | 96 +++++++++++++++++++++++++++++++++++++++-
2 files changed, 106 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 228652a59f27..4f0e70fafe2d 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -49,6 +49,18 @@ config PCIEAER_INJECT
gotten from:
https://git.kernel.org/cgit/linux/kernel/git/gong.chen/aer-inject.git/
+config PCIEAER_CXL
+ bool "PCI Express CXL RAS support for Restricted Hosts (RCH)"
+ default y
+ depends on PCIEAER && CXL_PCI
+ help
+ Enables error handling of downstream ports of a CXL host
+ that is operating in RCD mode (Restricted CXL Host, RCH).
+ The downstream port reports AER errors to a given RCEC.
+ Errors are handled by the CXL memory device driver.
+
+ If unsure, say Y.
+
#
# PCI Express ECRC
#
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index d3344fcf1f79..c354ca5e8f2b 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -946,14 +946,100 @@ static bool find_source_device(struct pci_dev *parent,
return true;
}
+#ifdef CONFIG_PCIEAER_CXL
+
+static bool is_cxl_mem_dev(struct pci_dev *dev)
+{
+ /*
+ * The capability, status, and control fields in Device 0,
+ * Function 0 DVSEC control the CXL functionality of the
+ * entire device (CXL 3.0, 8.1.3).
+ */
+ if (dev->devfn != PCI_DEVFN(0, 0))
+ return false;
+
+ /*
+ * CXL Memory Devices must have the 502h class code set (CXL
+ * 3.0, 8.1.12.1).
+ */
+ if ((dev->class >> 8) != PCI_CLASS_MEMORY_CXL)
+ return false;
+
+ return true;
+}
+
+static bool cxl_error_is_native(struct pci_dev *dev)
+{
+ struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
+
+ if (pcie_ports_native)
+ return true;
+
+ return host->native_aer && host->native_cxl_error;
+}
+
+static bool is_internal_error(struct aer_err_info *info)
+{
+ if (info->severity == AER_CORRECTABLE)
+ return info->status & PCI_ERR_COR_INTERNAL;
+
+ return info->status & PCI_ERR_UNC_INTN;
+}
+
+static int cxl_rch_handle_error_iter(struct pci_dev *dev, void *data)
+{
+ struct aer_err_info *info = (struct aer_err_info *)data;
+ const struct pci_error_handlers *err_handler;
+
+ if (!is_cxl_mem_dev(dev) || !cxl_error_is_native(dev))
+ return 0;
+
+ /* protect dev->driver */
+ device_lock(&dev->dev);
+
+ err_handler = dev->driver ? dev->driver->err_handler : NULL;
+ if (!err_handler)
+ goto out;
+
+ if (info->severity == AER_CORRECTABLE) {
+ if (err_handler->cor_error_detected)
+ err_handler->cor_error_detected(dev);
+ } else if (err_handler->error_detected) {
+ if (info->severity == AER_NONFATAL)
+ err_handler->error_detected(dev, pci_channel_io_normal);
+ else if (info->severity == AER_FATAL)
+ err_handler->error_detected(dev, pci_channel_io_frozen);
+ }
+out:
+ device_unlock(&dev->dev);
+ return 0;
+}
+
+static void cxl_rch_handle_error(struct pci_dev *dev, struct aer_err_info *info)
+{
+ /*
+ * Internal errors of an RCEC indicate an AER error in an
+ * RCH's downstream port. Check and handle them in the CXL.mem
+ * device driver.
+ */
+ if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_EC &&
+ is_internal_error(info))
+ pcie_walk_rcec(dev, cxl_rch_handle_error_iter, info);
+}
+
+#else
+static inline void cxl_rch_handle_error(struct pci_dev *dev,
+ struct aer_err_info *info) { }
+#endif
+
/**
- * handle_error_source - handle logging error into an event log
+ * pci_aer_handle_error - handle logging error into an event log
* @dev: pointer to pci_dev data structure of error source device
* @info: comprehensive error information
*
* Invoked when an error being detected by Root Port.
*/
-static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info)
+static void pci_aer_handle_error(struct pci_dev *dev, struct aer_err_info *info)
{
int aer = dev->aer_cap;
@@ -977,6 +1063,12 @@ static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info)
pcie_do_recovery(dev, pci_channel_io_normal, aer_root_reset);
else if (info->severity == AER_FATAL)
pcie_do_recovery(dev, pci_channel_io_frozen, aer_root_reset);
+}
+
+static void handle_error_source(struct pci_dev *dev, struct aer_err_info *info)
+{
+ cxl_rch_handle_error(dev, info);
+ pci_aer_handle_error(dev, info);
pci_dev_put(dev);
}
--
2.34.1
The CXL driver plans to use cper_print_aer() for logging restricted CXL
host (RCH) AER errors. cper_print_aer() is not currently exported and
therefore not usable by the CXL drivers built as loadable modules. Export
the cper_print_aer() function. Use the EXPORT_SYMBOL_NS_GPL() variant
to restrict the export to CXL drivers.
The CONFIG_ACPI_APEI_PCIEAER kernel config is currently used to enable
cper_print_aer(). cper_print_aer() logs the AER registers and is
useful in PCIE AER logging outside of APEI. Remove the
CONFIG_ACPI_APEI_PCIEAER dependency to enable cper_print_aer().
The cper_print_aer() function name implies CPER specific use but is useful
in non-CPER cases as well. Rename cper_print_aer() to pci_print_aer().
Also, update cxl_core to import CXL namespace imports.
Co-developed-by: Robert Richter <[email protected]>
Signed-off-by: Robert Richter <[email protected]>
Signed-off-by: Terry Bowman <[email protected]>
Cc: Mahesh J Salgaonkar <[email protected]>
Cc: "Oliver O'Halloran" <[email protected]>
Cc: Bjorn Helgaas <[email protected]>
Cc: [email protected]
Reviewed-by: Jonathan Cameron <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
---
drivers/cxl/core/port.c | 1 +
drivers/pci/pcie/aer.c | 9 +++++----
include/linux/aer.h | 2 +-
3 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
index 8dd9a44e8a7d..f3bb7ea37b44 100644
--- a/drivers/cxl/core/port.c
+++ b/drivers/cxl/core/port.c
@@ -2062,3 +2062,4 @@ static void cxl_core_exit(void)
subsys_initcall(cxl_core_init);
module_exit(cxl_core_exit);
MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(CXL);
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index f6c24ded134c..d3344fcf1f79 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -771,9 +771,10 @@ int cper_severity_to_aer(int cper_severity)
}
}
EXPORT_SYMBOL_GPL(cper_severity_to_aer);
+#endif
-void cper_print_aer(struct pci_dev *dev, int aer_severity,
- struct aer_capability_regs *aer)
+void pci_print_aer(struct pci_dev *dev, int aer_severity,
+ struct aer_capability_regs *aer)
{
int layer, agent, tlp_header_valid = 0;
u32 status, mask;
@@ -812,7 +813,7 @@ void cper_print_aer(struct pci_dev *dev, int aer_severity,
trace_aer_event(dev_name(&dev->dev), (status & ~mask),
aer_severity, tlp_header_valid, &aer->header_log);
}
-#endif
+EXPORT_SYMBOL_NS_GPL(pci_print_aer, CXL);
/**
* add_error_device - list device to be handled
@@ -1009,7 +1010,7 @@ static void aer_recover_work_func(struct work_struct *work)
PCI_SLOT(entry.devfn), PCI_FUNC(entry.devfn));
continue;
}
- cper_print_aer(pdev, entry.severity, entry.regs);
+ pci_print_aer(pdev, entry.severity, entry.regs);
if (entry.severity == AER_NONFATAL)
pcie_do_recovery(pdev, pci_channel_io_normal,
aer_root_reset);
diff --git a/include/linux/aer.h b/include/linux/aer.h
index 97f64ba1b34a..8f124b904314 100644
--- a/include/linux/aer.h
+++ b/include/linux/aer.h
@@ -64,7 +64,7 @@ static inline void pci_save_aer_state(struct pci_dev *dev) {}
static inline void pci_restore_aer_state(struct pci_dev *dev) {}
#endif
-void cper_print_aer(struct pci_dev *dev, int aer_severity,
+void pci_print_aer(struct pci_dev *dev, int aer_severity,
struct aer_capability_regs *aer);
int cper_severity_to_aer(int cper_severity);
void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn,
--
2.34.1
The RCH root port contains root command AER registers that should not be
enabled.[1] Disable these to prevent root port interrupts.
[1] CXL 3.0 - 12.2.1.1 RCH Downstream Port-detected Errors
Signed-off-by: Terry Bowman <[email protected]>
Signed-off-by: Robert Richter <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
---
drivers/cxl/core/core.h | 6 ++++++
drivers/cxl/core/pci.c | 29 +++++++++++++++++++++++++++++
drivers/cxl/core/port.c | 3 +++
3 files changed, 38 insertions(+)
diff --git a/drivers/cxl/core/core.h b/drivers/cxl/core/core.h
index f470ef5c0a6a..6b037030b936 100644
--- a/drivers/cxl/core/core.h
+++ b/drivers/cxl/core/core.h
@@ -87,4 +87,10 @@ enum cxl_poison_trace_type {
CXL_POISON_TRACE_CLEAR,
};
+#ifdef CONFIG_PCIEAER_CXL
+void cxl_disable_rch_root_ints(struct cxl_dport *dport);
+#else
+static inline void cxl_disable_rch_root_ints(struct cxl_dport *dport) { };
+#endif
+
#endif /* __CXL_CORE_H__ */
diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c
index 1c40270968b6..e306d3c9638b 100644
--- a/drivers/cxl/core/pci.c
+++ b/drivers/cxl/core/pci.c
@@ -819,6 +819,35 @@ static void cxl_handle_rdport_errors(struct cxl_dev_state *cxlds)
cxl_handle_rdport_ras(cxlds, dport);
}
+void cxl_disable_rch_root_ints(struct cxl_dport *dport)
+{
+ void __iomem *aer_base = dport->regs.dport_aer;
+ struct pci_host_bridge *bridge;
+ u32 aer_cmd_mask, aer_cmd;
+
+ if (!aer_base)
+ return;
+
+ bridge = to_pci_host_bridge(dport->dport_dev);
+
+ /*
+ * Disable RCH root port command interrupts.
+ * CXL 3.0 12.2.1.1 - RCH Downstream Port-detected Errors
+ *
+ * This sequence may not be necessary. CXL spec states disabling
+ * the root cmd register's interrupts is required. But, PCI spec
+ * shows these are disabled by default on reset.
+ */
+ if (bridge->native_cxl_error) {
+ aer_cmd_mask = (PCI_ERR_ROOT_CMD_COR_EN |
+ PCI_ERR_ROOT_CMD_NONFATAL_EN |
+ PCI_ERR_ROOT_CMD_FATAL_EN);
+ aer_cmd = readl(aer_base + PCI_ERR_ROOT_COMMAND);
+ aer_cmd &= ~aer_cmd_mask;
+ writel(aer_cmd, aer_base + PCI_ERR_ROOT_COMMAND);
+ }
+}
+
#else
static void cxl_handle_rdport_errors(struct cxl_dev_state *cxlds) { }
#endif
diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
index a482341c0d89..71df10309be8 100644
--- a/drivers/cxl/core/port.c
+++ b/drivers/cxl/core/port.c
@@ -1040,6 +1040,9 @@ __devm_cxl_add_dport(struct cxl_port *port, struct device *dport_dev,
cxl_dport_map_regs(dport);
+ if (dport->rch)
+ cxl_disable_rch_root_ints(dport);
+
cond_cxl_root_lock(port);
rc = add_dport(port, dport);
cond_cxl_root_unlock(port);
--
2.34.1
Restricted CXL host (RCH) downstream port AER information is not currently
logged while in the error state. One problem preventing the error logging
is the AER and RAS registers are not accessible. The CXL driver requires
changes to find RCH downstream port AER and RAS registers for purpose of
error logging.
RCH downstream ports are not enumerated during a PCI bus scan and are
instead discovered using system firmware, ACPI in this case.[1] The
downstream port is implemented as a Root Complex Register Block (RCRB).
The RCRB is a 4k memory block containing PCIe registers based on the PCIe
root port.[2] The RCRB includes AER extended capability registers used for
reporting errors. Note, the RCH's AER Capability is located in the RCRB
memory space instead of PCI configuration space, thus its register access
is different. Existing kernel PCIe AER functions can not be used to manage
the downstream port AER capabilities and RAS registers because the port was
not enumerated during PCI scan and the registers are not PCI config
accessible.
Discover RCH downstream port AER extended capability registers. Use MMIO
accesses to search for extended AER capability in RCRB register space.
[1] CXL 3.0 Spec, 9.11.2 - System Firmware View of CXL 1.1 Hierarchy
[2] CXL 3.0 Spec, 8.2.1.1 - RCH Downstream Port RCRB
Co-developed-by: Robert Richter <[email protected]>
Signed-off-by: Robert Richter <[email protected]>
Signed-off-by: Terry Bowman <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
---
drivers/cxl/core/core.h | 1 +
drivers/cxl/core/port.c | 6 ++++++
drivers/cxl/core/regs.c | 35 +++++++++++++++++++++++++++++++++++
3 files changed, 42 insertions(+)
diff --git a/drivers/cxl/core/core.h b/drivers/cxl/core/core.h
index 45e7e044cf4a..f470ef5c0a6a 100644
--- a/drivers/cxl/core/core.h
+++ b/drivers/cxl/core/core.h
@@ -73,6 +73,7 @@ struct cxl_rcrb_info;
resource_size_t __rcrb_to_component(struct device *dev,
struct cxl_rcrb_info *ri,
enum cxl_rcrb which);
+u16 cxl_rcrb_to_aer(struct device *dev, resource_size_t rcrb);
extern struct rw_semaphore cxl_dpa_rwsem;
diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
index 99cf5cfbbcb2..8dd9a44e8a7d 100644
--- a/drivers/cxl/core/port.c
+++ b/drivers/cxl/core/port.c
@@ -978,6 +978,8 @@ __devm_cxl_add_dport(struct cxl_port *port, struct device *dport_dev,
return ERR_PTR(-ENOMEM);
if (rcrb != CXL_RESOURCE_NONE) {
+ struct pci_host_bridge *host_bridge;
+
dport->rcrb.base = rcrb;
component_reg_phys = __rcrb_to_component(dport_dev, &dport->rcrb,
CXL_RCRB_DOWNSTREAM);
@@ -986,6 +988,10 @@ __devm_cxl_add_dport(struct cxl_port *port, struct device *dport_dev,
return ERR_PTR(-ENXIO);
}
+ host_bridge = to_pci_host_bridge(dport_dev);
+ if (host_bridge->native_cxl_error)
+ dport->rcrb.aer_cap = cxl_rcrb_to_aer(dport_dev, dport->rcrb.base);
+
dport->rch = true;
}
diff --git a/drivers/cxl/core/regs.c b/drivers/cxl/core/regs.c
index 6281127b3e9d..b34192bad2af 100644
--- a/drivers/cxl/core/regs.c
+++ b/drivers/cxl/core/regs.c
@@ -470,6 +470,41 @@ int cxl_setup_regs(struct cxl_register_map *map)
}
EXPORT_SYMBOL_NS_GPL(cxl_setup_regs, CXL);
+u16 cxl_rcrb_to_aer(struct device *dev, resource_size_t rcrb)
+{
+ void __iomem *addr;
+ u16 offset = 0;
+ u32 cap_hdr;
+
+ if (WARN_ON_ONCE(rcrb == CXL_RESOURCE_NONE))
+ return 0;
+
+ if (!request_mem_region(rcrb, SZ_4K, dev_name(dev)))
+ return 0;
+
+ addr = ioremap(rcrb, SZ_4K);
+ if (!addr) {
+ release_mem_region(rcrb, SZ_4K);
+ return 0;
+ }
+
+ cap_hdr = readl(addr + offset);
+ while (PCI_EXT_CAP_ID(cap_hdr) != PCI_EXT_CAP_ID_ERR) {
+ offset = PCI_EXT_CAP_NEXT(cap_hdr);
+ if (!offset)
+ break;
+ cap_hdr = readl(addr + offset);
+ }
+
+ if (offset)
+ dev_dbg(dev, "found AER extended capability (0x%x)\n", offset);
+
+ iounmap(addr);
+ release_mem_region(rcrb, SZ_4K);
+
+ return offset;
+}
+
resource_size_t __rcrb_to_component(struct device *dev, struct cxl_rcrb_info *ri,
enum cxl_rcrb which)
{
--
2.34.1
From: Robert Richter <[email protected]>
The Component Register base address @component_reg_phys is no longer
used after the rework of the Component Register setup which now uses
struct member @comp_map instead. Remove the base address.
Signed-off-by: Robert Richter <[email protected]>
Signed-off-by: Terry Bowman <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
---
drivers/cxl/cxlmem.h | 2 --
drivers/cxl/mem.c | 4 ++--
drivers/cxl/pci.c | 3 ---
tools/testing/cxl/test/mem.c | 1 -
4 files changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index 607ee34b0ce7..fdfa6e5dd739 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -390,7 +390,6 @@ enum cxl_devtype {
* @dpa_res: Overall DPA resource tree for the device
* @pmem_res: Active Persistent memory capacity configuration
* @ram_res: Active Volatile memory capacity configuration
- * @component_reg_phys: register base of component registers
* @serial: PCIe Device Serial Number
* @type: Generic Memory Class device or Vendor Specific Memory device
*/
@@ -405,7 +404,6 @@ struct cxl_dev_state {
struct resource dpa_res;
struct resource pmem_res;
struct resource ram_res;
- resource_size_t component_reg_phys;
u64 serial;
enum cxl_devtype type;
};
diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
index 317c7548e4e9..3af3218ebe0e 100644
--- a/drivers/cxl/mem.c
+++ b/drivers/cxl/mem.c
@@ -49,7 +49,6 @@ static int devm_cxl_add_endpoint(struct device *host, struct cxl_memdev *cxlmd,
struct cxl_dport *parent_dport)
{
struct cxl_port *parent_port = parent_dport->port;
- struct cxl_dev_state *cxlds = cxlmd->cxlds;
struct cxl_port *endpoint, *iter, *down;
int rc;
@@ -65,8 +64,9 @@ static int devm_cxl_add_endpoint(struct device *host, struct cxl_memdev *cxlmd,
ep->next = down;
}
+ /* The Endpoint's component regs are located in cxlds. */
endpoint = devm_cxl_add_port(host, &cxlmd->dev,
- cxlds->component_reg_phys,
+ CXL_RESOURCE_NONE,
parent_dport);
if (IS_ERR(endpoint))
return PTR_ERR(endpoint);
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
index 054cfa2f6a2d..2a5031f73c34 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/pci.c
@@ -835,7 +835,6 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
* If the component registers can't be found, the cxl_pci driver may
* still be useful for management functions so don't return an error.
*/
- cxlds->component_reg_phys = CXL_RESOURCE_NONE;
rc = cxl_pci_setup_regs(pdev, CXL_REGLOC_RBI_COMPONENT,
&cxlds->comp_map);
if (rc)
@@ -843,8 +842,6 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
else if (!cxlds->comp_map.component_map.ras.valid)
dev_dbg(&pdev->dev, "RAS registers not found\n");
- cxlds->component_reg_phys = cxlds->comp_map.resource;
-
rc = cxl_map_component_regs(&cxlds->comp_map, &cxlds->regs.component,
BIT(CXL_CM_CAP_CAP_ID_RAS));
if (rc)
diff --git a/tools/testing/cxl/test/mem.c b/tools/testing/cxl/test/mem.c
index 464fc39ed277..aa44d111fd28 100644
--- a/tools/testing/cxl/test/mem.c
+++ b/tools/testing/cxl/test/mem.c
@@ -1423,7 +1423,6 @@ static int cxl_mock_mem_probe(struct platform_device *pdev)
cxlds->serial = pdev->id;
if (is_rcd(pdev)) {
cxlds->rcd = true;
- cxlds->component_reg_phys = CXL_RESOURCE_NONE;
}
rc = cxl_enumerate_cmds(mds);
--
2.34.1
The CXL error handler currently only logs endpoint RAS status. The CXL
topology includes several components providing RAS details to be logged
during error handling.[1] Update the current handler's RAS logging to use a
RAS register address. Also, update the error handler function names to be
consistent with correctable and uncorrectable RAS. This will allow for
adding support to log other CXL component's RAS details in the future.
[1] CXL3.0 Table 8-22 CXL_Capability_ID Assignment
Co-developed-by: Robert Richter <[email protected]>
Signed-off-by: Robert Richter <[email protected]>
Signed-off-by: Terry Bowman <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
---
drivers/cxl/core/pci.c | 44 +++++++++++++++++++++++++++++-------------
1 file changed, 31 insertions(+), 13 deletions(-)
diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c
index c7a7887ebdcf..edfee8035820 100644
--- a/drivers/cxl/core/pci.c
+++ b/drivers/cxl/core/pci.c
@@ -646,32 +646,36 @@ void read_cdat_data(struct cxl_port *port)
}
EXPORT_SYMBOL_NS_GPL(read_cdat_data, CXL);
-void cxl_cor_error_detected(struct pci_dev *pdev)
+static void __cxl_handle_cor_ras(struct cxl_dev_state *cxlds,
+ void __iomem *ras_base)
{
- struct cxl_dev_state *cxlds = pci_get_drvdata(pdev);
void __iomem *addr;
u32 status;
- if (!cxlds->regs.ras)
+ if (!ras_base)
return;
- addr = cxlds->regs.ras + CXL_RAS_CORRECTABLE_STATUS_OFFSET;
+ addr = ras_base + CXL_RAS_CORRECTABLE_STATUS_OFFSET;
status = readl(addr);
if (status & CXL_RAS_CORRECTABLE_STATUS_MASK) {
writel(status & CXL_RAS_CORRECTABLE_STATUS_MASK, addr);
trace_cxl_aer_correctable_error(cxlds->cxlmd, status);
}
}
-EXPORT_SYMBOL_NS_GPL(cxl_cor_error_detected, CXL);
+
+static void cxl_handle_endpoint_cor_ras(struct cxl_dev_state *cxlds)
+{
+ return __cxl_handle_cor_ras(cxlds, cxlds->regs.ras);
+}
/* CXL spec rev3.0 8.2.4.16.1 */
-static void header_log_copy(struct cxl_dev_state *cxlds, u32 *log)
+static void header_log_copy(void __iomem *ras_base, u32 *log)
{
void __iomem *addr;
u32 *log_addr;
int i, log_u32_size = CXL_HEADERLOG_SIZE / sizeof(u32);
- addr = cxlds->regs.ras + CXL_RAS_HEADER_LOG_OFFSET;
+ addr = ras_base + CXL_RAS_HEADER_LOG_OFFSET;
log_addr = log;
for (i = 0; i < log_u32_size; i++) {
@@ -685,17 +689,18 @@ static void header_log_copy(struct cxl_dev_state *cxlds, u32 *log)
* Log the state of the RAS status registers and prepare them to log the
* next error status. Return 1 if reset needed.
*/
-static bool cxl_report_and_clear(struct cxl_dev_state *cxlds)
+static bool __cxl_handle_ras(struct cxl_dev_state *cxlds,
+ void __iomem *ras_base)
{
u32 hl[CXL_HEADERLOG_SIZE_U32];
void __iomem *addr;
u32 status;
u32 fe;
- if (!cxlds->regs.ras)
+ if (!ras_base)
return false;
- addr = cxlds->regs.ras + CXL_RAS_UNCORRECTABLE_STATUS_OFFSET;
+ addr = ras_base + CXL_RAS_UNCORRECTABLE_STATUS_OFFSET;
status = readl(addr);
if (!(status & CXL_RAS_UNCORRECTABLE_STATUS_MASK))
return false;
@@ -703,7 +708,7 @@ static bool cxl_report_and_clear(struct cxl_dev_state *cxlds)
/* If multiple errors, log header points to first error from ctrl reg */
if (hweight32(status) > 1) {
void __iomem *rcc_addr =
- cxlds->regs.ras + CXL_RAS_CAP_CONTROL_OFFSET;
+ ras_base + CXL_RAS_CAP_CONTROL_OFFSET;
fe = BIT(FIELD_GET(CXL_RAS_CAP_CONTROL_FE_MASK,
readl(rcc_addr)));
@@ -711,13 +716,26 @@ static bool cxl_report_and_clear(struct cxl_dev_state *cxlds)
fe = status;
}
- header_log_copy(cxlds, hl);
+ header_log_copy(ras_base, hl);
trace_cxl_aer_uncorrectable_error(cxlds->cxlmd, status, fe, hl);
writel(status & CXL_RAS_UNCORRECTABLE_STATUS_MASK, addr);
return true;
}
+static bool cxl_handle_endpoint_ras(struct cxl_dev_state *cxlds)
+{
+ return __cxl_handle_ras(cxlds, cxlds->regs.ras);
+}
+
+void cxl_cor_error_detected(struct pci_dev *pdev)
+{
+ struct cxl_dev_state *cxlds = pci_get_drvdata(pdev);
+
+ cxl_handle_endpoint_cor_ras(cxlds);
+}
+EXPORT_SYMBOL_NS_GPL(cxl_cor_error_detected, CXL);
+
pci_ers_result_t cxl_error_detected(struct pci_dev *pdev,
pci_channel_state_t state)
{
@@ -732,7 +750,7 @@ pci_ers_result_t cxl_error_detected(struct pci_dev *pdev,
* chance the situation is recoverable dump the status of the RAS
* capability registers and bounce the active state of the memdev.
*/
- ue = cxl_report_and_clear(cxlds);
+ ue = cxl_handle_endpoint_ras(cxlds);
switch (state) {
case pci_channel_io_normal:
--
2.34.1
From: Robert Richter <[email protected]>
Same as for ports and dports, also store the endpoint's Component
Register mappings, use struct cxl_dev_state for that.
Keep the Component Register base address @component_reg_phys a bit to
not break functionality. It will be removed after the transition in a
later patch.
Signed-off-by: Robert Richter <[email protected]>
Signed-off-by: Terry Bowman <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
---
drivers/cxl/cxlmem.h | 2 ++
drivers/cxl/pci.c | 9 +++++----
2 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index 79e99c873ca2..607ee34b0ce7 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -382,6 +382,7 @@ enum cxl_devtype {
*
* @dev: The device associated with this CXL state
* @cxlmd: The device representing the CXL.mem capabilities of @dev
+ * @comp_map: component register capability mappings
* @regs: Parsed register blocks
* @cxl_dvsec: Offset to the PCIe device DVSEC
* @rcd: operating in RCD mode (CXL 3.0 9.11.8 CXL Devices Attached to an RCH)
@@ -396,6 +397,7 @@ enum cxl_devtype {
struct cxl_dev_state {
struct device *dev;
struct cxl_memdev *cxlmd;
+ struct cxl_register_map comp_map;
struct cxl_regs regs;
int cxl_dvsec;
bool rcd;
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
index 48f88d96029d..054cfa2f6a2d 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/pci.c
@@ -836,15 +836,16 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
* still be useful for management functions so don't return an error.
*/
cxlds->component_reg_phys = CXL_RESOURCE_NONE;
- rc = cxl_pci_setup_regs(pdev, CXL_REGLOC_RBI_COMPONENT, &map);
+ rc = cxl_pci_setup_regs(pdev, CXL_REGLOC_RBI_COMPONENT,
+ &cxlds->comp_map);
if (rc)
dev_warn(&pdev->dev, "No component registers (%d)\n", rc);
- else if (!map.component_map.ras.valid)
+ else if (!cxlds->comp_map.component_map.ras.valid)
dev_dbg(&pdev->dev, "RAS registers not found\n");
- cxlds->component_reg_phys = map.resource;
+ cxlds->component_reg_phys = cxlds->comp_map.resource;
- rc = cxl_map_component_regs(&map, &cxlds->regs.component,
+ rc = cxl_map_component_regs(&cxlds->comp_map, &cxlds->regs.component,
BIT(CXL_CM_CAP_CAP_ID_RAS));
if (rc)
dev_dbg(&pdev->dev, "Failed to map RAS capability.\n");
--
2.34.1
From: Robert Richter <[email protected]>
AER corrected and uncorrectable internal errors (CIE/UIE) are masked
in their corresponding mask registers per default once in power-up
state. [1][2] Enable internal errors for RCECs to receive CXL
downstream port errors of Restricted CXL Hosts (RCHs).
[1] CXL 3.0 Spec, 12.2.1.1 - RCH Downstream Port Detected Errors
[2] PCIe Base Spec r6.0, 7.8.4.3 Uncorrectable Error Mask Register,
7.8.4.6 Correctable Error Mask Register
Co-developed-by: Terry Bowman <[email protected]>
Signed-off-by: Terry Bowman <[email protected]>
Signed-off-by: Robert Richter <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
---
drivers/pci/pcie/aer.c | 57 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 57 insertions(+)
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index c354ca5e8f2b..916fbca95e53 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -948,6 +948,30 @@ static bool find_source_device(struct pci_dev *parent,
#ifdef CONFIG_PCIEAER_CXL
+/**
+ * pci_aer_unmask_internal_errors - unmask internal errors
+ * @dev: pointer to the pcie_dev data structure
+ *
+ * Unmasks internal errors in the Uncorrectable and Correctable Error
+ * Mask registers.
+ *
+ * Note: AER must be enabled and supported by the device which must be
+ * checked in advance, e.g. with pcie_aer_is_native().
+ */
+static void pci_aer_unmask_internal_errors(struct pci_dev *dev)
+{
+ int aer = dev->aer_cap;
+ u32 mask;
+
+ pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_MASK, &mask);
+ mask &= ~PCI_ERR_UNC_INTN;
+ pci_write_config_dword(dev, aer + PCI_ERR_UNCOR_MASK, mask);
+
+ pci_read_config_dword(dev, aer + PCI_ERR_COR_MASK, &mask);
+ mask &= ~PCI_ERR_COR_INTERNAL;
+ pci_write_config_dword(dev, aer + PCI_ERR_COR_MASK, mask);
+}
+
static bool is_cxl_mem_dev(struct pci_dev *dev)
{
/*
@@ -1027,7 +1051,39 @@ static void cxl_rch_handle_error(struct pci_dev *dev, struct aer_err_info *info)
pcie_walk_rcec(dev, cxl_rch_handle_error_iter, info);
}
+static int handles_cxl_error_iter(struct pci_dev *dev, void *data)
+{
+ bool *handles_cxl = data;
+
+ if (!*handles_cxl)
+ *handles_cxl = is_cxl_mem_dev(dev) && cxl_error_is_native(dev);
+
+ /* Non-zero terminates iteration */
+ return *handles_cxl;
+}
+
+static bool handles_cxl_errors(struct pci_dev *rcec)
+{
+ bool handles_cxl = false;
+
+ if (pci_pcie_type(rcec) == PCI_EXP_TYPE_RC_EC &&
+ pcie_aer_is_native(rcec))
+ pcie_walk_rcec(rcec, handles_cxl_error_iter, &handles_cxl);
+
+ return handles_cxl;
+}
+
+static void cxl_rch_enable_rcec(struct pci_dev *rcec)
+{
+ if (!handles_cxl_errors(rcec))
+ return;
+
+ pci_aer_unmask_internal_errors(rcec);
+ pci_info(rcec, "CXL: Internal errors unmasked");
+}
+
#else
+static inline void cxl_rch_enable_rcec(struct pci_dev *dev) { }
static inline void cxl_rch_handle_error(struct pci_dev *dev,
struct aer_err_info *info) { }
#endif
@@ -1428,6 +1484,7 @@ static int aer_probe(struct pcie_device *dev)
return status;
}
+ cxl_rch_enable_rcec(port);
aer_enable_rootport(rpc);
pci_info(port, "enabled with IRQ %d\n", dev->irq);
return 0;
--
2.34.1
From: Robert Richter <[email protected]>
Trivial change that renames variable phys_addr in
cxl_map_component_regs() to shorten its length to keep the 80 char
size limit for the line and also for consistency between the different
paths.
Signed-off-by: Robert Richter <[email protected]>
Signed-off-by: Terry Bowman <[email protected]>
Reviewed-by: Dave Jiang <[email protected]>
---
drivers/cxl/core/regs.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/cxl/core/regs.c b/drivers/cxl/core/regs.c
index 2360b480c5c5..d22ba5a76b33 100644
--- a/drivers/cxl/core/regs.c
+++ b/drivers/cxl/core/regs.c
@@ -217,16 +217,16 @@ int cxl_map_component_regs(const struct cxl_register_map *map,
for (i = 0; i < ARRAY_SIZE(mapinfo); i++) {
struct mapinfo *mi = &mapinfo[i];
- resource_size_t phys_addr;
+ resource_size_t addr;
resource_size_t length;
if (!mi->rmap->valid)
continue;
if (!test_bit(mi->rmap->id, &map_mask))
continue;
- phys_addr = map->resource + mi->rmap->offset;
+ addr = map->resource + mi->rmap->offset;
length = mi->rmap->size;
- *(mi->addr) = devm_cxl_iomap_block(dev, phys_addr, length);
+ *(mi->addr) = devm_cxl_iomap_block(dev, addr, length);
if (!*(mi->addr))
return -ENOMEM;
}
--
2.34.1
Terry Bowman wrote:
> This patchset enables CXL RCH error handling. This is necessary because RCH
> downstream port protocol error handling is implemented uniquely and not
> currently supported. These patches address the following:
>
> * Discovery and mapping of RCH downstream port AER registers.
>
> * AER portdrv changes to support CXL RCH protocol errors.
>
> * Interrupt setup specific to RCH mode: enabling RCEC internal
> errors and disabling root port interrupts.
>
> Changes in V8:
> - Rebased onto: commit
> 0c0df63177e3 ("Merge branch 'for-6.5/cxl-rch-eh' into for-6.5/cxl")
> - cxl/port: Pre-initialize component register mappings
> - Added patch to pre-initialize component register mappings.
> - cxl/pci: Remove Component Register base address from
> - Separated removal of Component Register base address in struct
> cxl_dev_state to not break functionality.
> - cxl/hdm: Use stored Component Register mappings to map HDM decoder
> capability
> - Implemented a less strict check in devm_cxl_setup_hdm(), be tolerant
> if HDM decoder registers are not implemented.
> - cxl/pci: Map RCH downstream AER registers for logging protocol errors
> - Fixed uninitialized access of map->dev in cxl_dport_map_regs().
> - PCI/AER: Forward RCH downstream port-detected errors to the CXL.mem
> dev handler
> - Fix typo in patch description.
> - cxl/pci: Update CXL error logging to use RAS register address
> - Fix typo in patch description.
Hey Terry, thank you for turning this around so quickly. I will have a
look and see if this is suitable as a follow-up merge for v6.5 next week
since it would be nice to finish this off this cycle, but no promises.