2024-02-26 20:42:55

by Arthur Grillo

[permalink] [raw]
Subject: [PATCH] drm/vkms: Add information on how to benchmark

Now that we have a defined benchmark for testing the driver, add
documentation on how to run it.

Signed-off-by: Arthur Grillo <[email protected]>
---
Documentation/gpu/vkms.rst | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/Documentation/gpu/vkms.rst b/Documentation/gpu/vkms.rst
index ba04ac7c2167..6d07f79f77ff 100644
--- a/Documentation/gpu/vkms.rst
+++ b/Documentation/gpu/vkms.rst
@@ -89,6 +89,12 @@ You can also run subtests if you do not want to run the entire test::
sudo ./build/tests/kms_flip --run-subtest basic-plain-flip --device "sys:/sys/devices/platform/vkms"
sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/tests/kms_flip --run-subtest basic-plain-flip

+If you are developing features that may affect performance, you can run the kms_fb_stress
+benchmark::
+
+ sudo ./build/benchmarks/kms_fb_stress --device "sys:/sys/devices/platform/vkms"
+ sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/benchmarks/kms_fb_stress
+
TODO
====


---
base-commit: eeb8e8d9f124f279e80ae679f4ba6e822ce4f95f
change-id: 20240226-bench-vkms-5b8b7aab255e

Best regards,
--
Arthur Grillo <[email protected]>



2024-02-27 09:22:00

by Pekka Paalanen

[permalink] [raw]
Subject: Re: [PATCH] drm/vkms: Add information on how to benchmark

On Mon, 26 Feb 2024 17:42:11 -0300
Arthur Grillo <[email protected]> wrote:

> Now that we have a defined benchmark for testing the driver, add
> documentation on how to run it.
>
> Signed-off-by: Arthur Grillo <[email protected]>
> ---
> Documentation/gpu/vkms.rst | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/Documentation/gpu/vkms.rst b/Documentation/gpu/vkms.rst
> index ba04ac7c2167..6d07f79f77ff 100644
> --- a/Documentation/gpu/vkms.rst
> +++ b/Documentation/gpu/vkms.rst
> @@ -89,6 +89,12 @@ You can also run subtests if you do not want to run the entire test::
> sudo ./build/tests/kms_flip --run-subtest basic-plain-flip --device "sys:/sys/devices/platform/vkms"
> sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/tests/kms_flip --run-subtest basic-plain-flip
>
> +If you are developing features that may affect performance, you can run the kms_fb_stress

s/can/must/

> +benchmark::

before and after, and report the numbers.

> +
> + sudo ./build/benchmarks/kms_fb_stress --device "sys:/sys/devices/platform/vkms"
> + sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/benchmarks/kms_fb_stress

Do people need to run both commands?

Anyway, a good idea.

Acked-by: Pekka Paalanen <[email protected]>


Thanks,
pq

> +
> TODO
> ====
>
>
> ---
> base-commit: eeb8e8d9f124f279e80ae679f4ba6e822ce4f95f
> change-id: 20240226-bench-vkms-5b8b7aab255e
>
> Best regards,


Attachments:
(No filename) (849.00 B)
OpenPGP digital signature

2024-02-27 11:45:30

by Arthur Grillo

[permalink] [raw]
Subject: Re: [PATCH] drm/vkms: Add information on how to benchmark



On 27/02/24 06:19, Pekka Paalanen wrote:
> On Mon, 26 Feb 2024 17:42:11 -0300
> Arthur Grillo <[email protected]> wrote:
>
>> Now that we have a defined benchmark for testing the driver, add
>> documentation on how to run it.
>>
>> Signed-off-by: Arthur Grillo <[email protected]>
>> ---
>> Documentation/gpu/vkms.rst | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>> diff --git a/Documentation/gpu/vkms.rst b/Documentation/gpu/vkms.rst
>> index ba04ac7c2167..6d07f79f77ff 100644
>> --- a/Documentation/gpu/vkms.rst
>> +++ b/Documentation/gpu/vkms.rst
>> @@ -89,6 +89,12 @@ You can also run subtests if you do not want to run the entire test::
>> sudo ./build/tests/kms_flip --run-subtest basic-plain-flip --device "sys:/sys/devices/platform/vkms"
>> sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/tests/kms_flip --run-subtest basic-plain-flip
>>
>> +If you are developing features that may affect performance, you can run the kms_fb_stress
>
> s/can/must/
>
>> +benchmark::
>
> before and after, and report the numbers.

Did you mean to write the benchmarks logs here?

>
>> +
>> + sudo ./build/benchmarks/kms_fb_stress --device "sys:/sys/devices/platform/vkms"
>> + sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/benchmarks/kms_fb_stress
>
> Do people need to run both commands?

No, they don't, just two options.

Best Regards,
~Arthur Grillo

>
> Anyway, a good idea.
>
> Acked-by: Pekka Paalanen <[email protected]>
>
>
> Thanks,
> pq
>
>> +
>> TODO
>> ====
>>
>>
>> ---
>> base-commit: eeb8e8d9f124f279e80ae679f4ba6e822ce4f95f
>> change-id: 20240226-bench-vkms-5b8b7aab255e
>>
>> Best regards,
>

2024-02-27 12:05:56

by Pekka Paalanen

[permalink] [raw]
Subject: Re: [PATCH] drm/vkms: Add information on how to benchmark

On Tue, 27 Feb 2024 08:44:52 -0300
Arthur Grillo <[email protected]> wrote:

> On 27/02/24 06:19, Pekka Paalanen wrote:
> > On Mon, 26 Feb 2024 17:42:11 -0300
> > Arthur Grillo <[email protected]> wrote:
> >
> >> Now that we have a defined benchmark for testing the driver, add
> >> documentation on how to run it.
> >>
> >> Signed-off-by: Arthur Grillo <[email protected]>
> >> ---
> >> Documentation/gpu/vkms.rst | 6 ++++++
> >> 1 file changed, 6 insertions(+)
> >>
> >> diff --git a/Documentation/gpu/vkms.rst b/Documentation/gpu/vkms.rst
> >> index ba04ac7c2167..6d07f79f77ff 100644
> >> --- a/Documentation/gpu/vkms.rst
> >> +++ b/Documentation/gpu/vkms.rst
> >> @@ -89,6 +89,12 @@ You can also run subtests if you do not want to run the entire test::
> >> sudo ./build/tests/kms_flip --run-subtest basic-plain-flip --device "sys:/sys/devices/platform/vkms"
> >> sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/tests/kms_flip --run-subtest basic-plain-flip
> >>
> >> +If you are developing features that may affect performance, you can run the kms_fb_stress
> >
> > s/can/must/
> >
> >> +benchmark::
> >
> > before and after, and report the numbers.
>
> Did you mean to write the benchmarks logs here?

I mean people should be required tell their before and after numbers in
either commit message (my preference) or in series cover letter (if
benchmarking commits is not useful).

With the addition of YUV support in VKMS, maybe the benchmark needs to
start printing YUV numbers separately as a new case.


Thanks,
pq

>
> >
> >> +
> >> + sudo ./build/benchmarks/kms_fb_stress --device "sys:/sys/devices/platform/vkms"
> >> + sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/benchmarks/kms_fb_stress
> >
> > Do people need to run both commands?
>
> No, they don't, just two options.
>
> Best Regards,
> ~Arthur Grillo
>
> >
> > Anyway, a good idea.
> >
> > Acked-by: Pekka Paalanen <[email protected]>
> >
> >
> > Thanks,
> > pq
> >
> >> +
> >> TODO
> >> ====
> >>
> >>
> >> ---
> >> base-commit: eeb8e8d9f124f279e80ae679f4ba6e822ce4f95f
> >> change-id: 20240226-bench-vkms-5b8b7aab255e
> >>
> >> Best regards,
> >


Attachments:
(No filename) (849.00 B)
OpenPGP digital signature

2024-02-27 12:54:43

by Arthur Grillo

[permalink] [raw]
Subject: Re: [PATCH] drm/vkms: Add information on how to benchmark



On 27/02/24 08:55, Pekka Paalanen wrote:
> On Tue, 27 Feb 2024 08:44:52 -0300
> Arthur Grillo <[email protected]> wrote:
>
>> On 27/02/24 06:19, Pekka Paalanen wrote:
>>> On Mon, 26 Feb 2024 17:42:11 -0300
>>> Arthur Grillo <[email protected]> wrote:
>>>
>>>> Now that we have a defined benchmark for testing the driver, add
>>>> documentation on how to run it.
>>>>
>>>> Signed-off-by: Arthur Grillo <[email protected]>
>>>> ---
>>>> Documentation/gpu/vkms.rst | 6 ++++++
>>>> 1 file changed, 6 insertions(+)
>>>>
>>>> diff --git a/Documentation/gpu/vkms.rst b/Documentation/gpu/vkms.rst
>>>> index ba04ac7c2167..6d07f79f77ff 100644
>>>> --- a/Documentation/gpu/vkms.rst
>>>> +++ b/Documentation/gpu/vkms.rst
>>>> @@ -89,6 +89,12 @@ You can also run subtests if you do not want to run the entire test::
>>>> sudo ./build/tests/kms_flip --run-subtest basic-plain-flip --device "sys:/sys/devices/platform/vkms"
>>>> sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/tests/kms_flip --run-subtest basic-plain-flip
>>>>
>>>> +If you are developing features that may affect performance, you can run the kms_fb_stress
>>>
>>> s/can/must/
>>>
>>>> +benchmark::
>>>
>>> before and after, and report the numbers.
>>
>> Did you mean to write the benchmarks logs here?
>
> I mean people should be required tell their before and after numbers in
> either commit message (my preference) or in series cover letter (if
> benchmarking commits is not useful).
>
> With the addition of YUV support in VKMS, maybe the benchmark needs to

With the upcoming addition, I've sent a patch to arbitrarily change the
formats on the benchmark via command-line options. It's not adding a new
case, but maybe just this could already help.

https://lore.kernel.org/all/[email protected]/

Best Regards,
~Arthur Grillo

> start printing YUV numbers separately as a new case.
>
>
> Thanks,
> pq
>
>>
>>>
>>>> +
>>>> + sudo ./build/benchmarks/kms_fb_stress --device "sys:/sys/devices/platform/vkms"
>>>> + sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/benchmarks/kms_fb_stress
>>>
>>> Do people need to run both commands?
>>
>> No, they don't, just two options.
>>
>> Best Regards,
>> ~Arthur Grillo
>>
>>>
>>> Anyway, a good idea.
>>>
>>> Acked-by: Pekka Paalanen <[email protected]>
>>>
>>>
>>> Thanks,
>>> pq
>>>
>>>> +
>>>> TODO
>>>> ====
>>>>
>>>>
>>>> ---
>>>> base-commit: eeb8e8d9f124f279e80ae679f4ba6e822ce4f95f
>>>> change-id: 20240226-bench-vkms-5b8b7aab255e
>>>>
>>>> Best regards,
>>>
>

2024-02-27 13:35:41

by Pekka Paalanen

[permalink] [raw]
Subject: Re: [PATCH] drm/vkms: Add information on how to benchmark

On Tue, 27 Feb 2024 09:29:58 -0300
Arthur Grillo <[email protected]> wrote:

> On 27/02/24 08:55, Pekka Paalanen wrote:
> > On Tue, 27 Feb 2024 08:44:52 -0300
> > Arthur Grillo <[email protected]> wrote:
> >
> >> On 27/02/24 06:19, Pekka Paalanen wrote:
> >>> On Mon, 26 Feb 2024 17:42:11 -0300
> >>> Arthur Grillo <[email protected]> wrote:
> >>>
> >>>> Now that we have a defined benchmark for testing the driver, add
> >>>> documentation on how to run it.
> >>>>
> >>>> Signed-off-by: Arthur Grillo <[email protected]>
> >>>> ---
> >>>> Documentation/gpu/vkms.rst | 6 ++++++
> >>>> 1 file changed, 6 insertions(+)
> >>>>
> >>>> diff --git a/Documentation/gpu/vkms.rst b/Documentation/gpu/vkms.rst
> >>>> index ba04ac7c2167..6d07f79f77ff 100644
> >>>> --- a/Documentation/gpu/vkms.rst
> >>>> +++ b/Documentation/gpu/vkms.rst
> >>>> @@ -89,6 +89,12 @@ You can also run subtests if you do not want to run the entire test::
> >>>> sudo ./build/tests/kms_flip --run-subtest basic-plain-flip --device "sys:/sys/devices/platform/vkms"
> >>>> sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/tests/kms_flip --run-subtest basic-plain-flip
> >>>>
> >>>> +If you are developing features that may affect performance, you can run the kms_fb_stress
> >>>
> >>> s/can/must/
> >>>
> >>>> +benchmark::
> >>>
> >>> before and after, and report the numbers.
> >>
> >> Did you mean to write the benchmarks logs here?
> >
> > I mean people should be required tell their before and after numbers in
> > either commit message (my preference) or in series cover letter (if
> > benchmarking commits is not useful).
> >
> > With the addition of YUV support in VKMS, maybe the benchmark needs to
>
> With the upcoming addition, I've sent a patch to arbitrarily change the
> formats on the benchmark via command-line options. It's not adding a new
> case, but maybe just this could already help.
>
> https://lore.kernel.org/all/[email protected]/

In that case you would need to document exactly what command line
options to use, and ask people to report the numbers of each test
case.

That works. Alternatively or additionally, the test cases could be
built in to the benchmark, and it just reports numbers for all of them
in a single invocation. Then people running the standard benchmark do
not need to worry about getting the command line options right, or
running multiple cases. And reviewers do not need to ask to re-run with
the correct options.

I suppose rotations might get added, too.

Or maybe you'd provide a script that covers all the standard
performance test cases?


Thanks,
pq

> > start printing YUV numbers separately as a new case.
> >
> >
> > Thanks,
> > pq
> >
> >>
> >>>
> >>>> +
> >>>> + sudo ./build/benchmarks/kms_fb_stress --device "sys:/sys/devices/platform/vkms"
> >>>> + sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/benchmarks/kms_fb_stress
> >>>
> >>> Do people need to run both commands?
> >>
> >> No, they don't, just two options.
> >>
> >> Best Regards,
> >> ~Arthur Grillo
> >>
> >>>
> >>> Anyway, a good idea.
> >>>
> >>> Acked-by: Pekka Paalanen <[email protected]>
> >>>
> >>>
> >>> Thanks,
> >>> pq
> >>>
> >>>> +
> >>>> TODO
> >>>> ====
> >>>>
> >>>>
> >>>> ---
> >>>> base-commit: eeb8e8d9f124f279e80ae679f4ba6e822ce4f95f
> >>>> change-id: 20240226-bench-vkms-5b8b7aab255e
> >>>>
> >>>> Best regards,
> >>>
> >


Attachments:
(No filename) (849.00 B)
OpenPGP digital signature

2024-02-27 15:41:44

by Louis Chauvet

[permalink] [raw]
Subject: Re: [PATCH] drm/vkms: Add information on how to benchmark

Le 27/02/24 - 15:26, Pekka Paalanen a ?crit :
> On Tue, 27 Feb 2024 09:29:58 -0300
> Arthur Grillo <[email protected]> wrote:
>
> > On 27/02/24 08:55, Pekka Paalanen wrote:
> > > On Tue, 27 Feb 2024 08:44:52 -0300
> > > Arthur Grillo <[email protected]> wrote:
> > >
> > >> On 27/02/24 06:19, Pekka Paalanen wrote:
> > >>> On Mon, 26 Feb 2024 17:42:11 -0300
> > >>> Arthur Grillo <[email protected]> wrote:
> > >>>
> > >>>> Now that we have a defined benchmark for testing the driver, add
> > >>>> documentation on how to run it.
> > >>>>
> > >>>> Signed-off-by: Arthur Grillo <[email protected]>
> > >>>> ---
> > >>>> Documentation/gpu/vkms.rst | 6 ++++++
> > >>>> 1 file changed, 6 insertions(+)
> > >>>>
> > >>>> diff --git a/Documentation/gpu/vkms.rst b/Documentation/gpu/vkms.rst
> > >>>> index ba04ac7c2167..6d07f79f77ff 100644
> > >>>> --- a/Documentation/gpu/vkms.rst
> > >>>> +++ b/Documentation/gpu/vkms.rst
> > >>>> @@ -89,6 +89,12 @@ You can also run subtests if you do not want to run the entire test::
> > >>>> sudo ./build/tests/kms_flip --run-subtest basic-plain-flip --device "sys:/sys/devices/platform/vkms"
> > >>>> sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/tests/kms_flip --run-subtest basic-plain-flip
> > >>>>
> > >>>> +If you are developing features that may affect performance, you can run the kms_fb_stress
> > >>>
> > >>> s/can/must/
> > >>>
> > >>>> +benchmark::
> > >>>
> > >>> before and after, and report the numbers.
> > >>
> > >> Did you mean to write the benchmarks logs here?
> > >
> > > I mean people should be required tell their before and after numbers in
> > > either commit message (my preference) or in series cover letter (if
> > > benchmarking commits is not useful).
> > >
> > > With the addition of YUV support in VKMS, maybe the benchmark needs to
> >
> > With the upcoming addition, I've sent a patch to arbitrarily change the
> > formats on the benchmark via command-line options. It's not adding a new
> > case, but maybe just this could already help.
> >
> > https://lore.kernel.org/all/[email protected]/
>
> In that case you would need to document exactly what command line
> options to use, and ask people to report the numbers of each test
> case.
>
> That works. Alternatively or additionally, the test cases could be
> built in to the benchmark, and it just reports numbers for all of them
> in a single invocation. Then people running the standard benchmark do
> not need to worry about getting the command line options right, or
> running multiple cases. And reviewers do not need to ask to re-run with
> the correct options.
>
> I suppose rotations might get added, too.
>
> Or maybe you'd provide a script that covers all the standard
> performance test cases?

I agree with Pekka, it would be nice to have a simple "bench everything"
tool. Like kms_rotation is a test for all rotations, kms_plane for color
conversions... kms_fb_test can run a few combinations (rgb+norotation,
rgb+yuv, rgb+rotation...) and report a "global result" (this way it's easy
to spot a regression not related directly to your changes).

I don't know the IGT benchmark API, but I think there is a way to create
"sub-benchmarks" so you can run a specific benchmark when developping and
the whole thing before pushing your series.

Kind regards,
Louis Chauvet

>
> Thanks,
> pq
>
> > > start printing YUV numbers separately as a new case.
> > >
> > >
> > > Thanks,
> > > pq
> > >
> > >>
> > >>>
> > >>>> +
> > >>>> + sudo ./build/benchmarks/kms_fb_stress --device "sys:/sys/devices/platform/vkms"
> > >>>> + sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/benchmarks/kms_fb_stress
> > >>>
> > >>> Do people need to run both commands?
> > >>
> > >> No, they don't, just two options.
> > >>
> > >> Best Regards,
> > >> ~Arthur Grillo
> > >>
> > >>>
> > >>> Anyway, a good idea.
> > >>>
> > >>> Acked-by: Pekka Paalanen <[email protected]>
> > >>>
> > >>>
> > >>> Thanks,
> > >>> pq
> > >>>
> > >>>> +
> > >>>> TODO
> > >>>> ====
> > >>>>
> > >>>>
> > >>>> ---
> > >>>> base-commit: eeb8e8d9f124f279e80ae679f4ba6e822ce4f95f
> > >>>> change-id: 20240226-bench-vkms-5b8b7aab255e
> > >>>>
> > >>>> Best regards,
> > >>>
> > >
>



--
Louis Chauvet, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

2024-02-27 16:53:21

by Arthur Grillo

[permalink] [raw]
Subject: Re: [PATCH] drm/vkms: Add information on how to benchmark



On 27/02/24 12:02, Louis Chauvet wrote:
> Le 27/02/24 - 15:26, Pekka Paalanen a écrit :
>> On Tue, 27 Feb 2024 09:29:58 -0300
>> Arthur Grillo <[email protected]> wrote:
>>
>>> On 27/02/24 08:55, Pekka Paalanen wrote:
>>>> On Tue, 27 Feb 2024 08:44:52 -0300
>>>> Arthur Grillo <[email protected]> wrote:
>>>>
>>>>> On 27/02/24 06:19, Pekka Paalanen wrote:
>>>>>> On Mon, 26 Feb 2024 17:42:11 -0300
>>>>>> Arthur Grillo <[email protected]> wrote:
>>>>>>
>>>>>>> Now that we have a defined benchmark for testing the driver, add
>>>>>>> documentation on how to run it.
>>>>>>>
>>>>>>> Signed-off-by: Arthur Grillo <[email protected]>
>>>>>>> ---
>>>>>>> Documentation/gpu/vkms.rst | 6 ++++++
>>>>>>> 1 file changed, 6 insertions(+)
>>>>>>>
>>>>>>> diff --git a/Documentation/gpu/vkms.rst b/Documentation/gpu/vkms.rst
>>>>>>> index ba04ac7c2167..6d07f79f77ff 100644
>>>>>>> --- a/Documentation/gpu/vkms.rst
>>>>>>> +++ b/Documentation/gpu/vkms.rst
>>>>>>> @@ -89,6 +89,12 @@ You can also run subtests if you do not want to run the entire test::
>>>>>>> sudo ./build/tests/kms_flip --run-subtest basic-plain-flip --device "sys:/sys/devices/platform/vkms"
>>>>>>> sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/tests/kms_flip --run-subtest basic-plain-flip
>>>>>>>
>>>>>>> +If you are developing features that may affect performance, you can run the kms_fb_stress
>>>>>>
>>>>>> s/can/must/
>>>>>>
>>>>>>> +benchmark::
>>>>>>
>>>>>> before and after, and report the numbers.
>>>>>
>>>>> Did you mean to write the benchmarks logs here?
>>>>
>>>> I mean people should be required tell their before and after numbers in
>>>> either commit message (my preference) or in series cover letter (if
>>>> benchmarking commits is not useful).
>>>>
>>>> With the addition of YUV support in VKMS, maybe the benchmark needs to
>>>
>>> With the upcoming addition, I've sent a patch to arbitrarily change the
>>> formats on the benchmark via command-line options. It's not adding a new
>>> case, but maybe just this could already help.
>>>
>>> https://lore.kernel.org/all/[email protected]/
>>
>> In that case you would need to document exactly what command line
>> options to use, and ask people to report the numbers of each test
>> case.
>>
>> That works. Alternatively or additionally, the test cases could be
>> built in to the benchmark, and it just reports numbers for all of them
>> in a single invocation. Then people running the standard benchmark do
>> not need to worry about getting the command line options right, or
>> running multiple cases. And reviewers do not need to ask to re-run with
>> the correct options.
>>
>> I suppose rotations might get added, too.
>>
>> Or maybe you'd provide a script that covers all the standard
>> performance test cases?
>
> I agree with Pekka, it would be nice to have a simple "bench everything"
> tool. Like kms_rotation is a test for all rotations, kms_plane for color
> conversions... kms_fb_test can run a few combinations (rgb+norotation,
> rgb+yuv, rgb+rotation...) and report a "global result" (this way it's easy
> to spot a regression not related directly to your changes).
>
> I don't know the IGT benchmark API, but I think there is a way to create
> "sub-benchmarks" so you can run a specific benchmark when developping and
> the whole thing before pushing your series.
>
> Kind regards,
> Louis Chauvet
>

Thank you guys for the ideas!

I'm going to work on something along on those lines, having combinations
of formats, rotations and whatever property that might be useful for
stress testing the driver. Maybe query the driver for the supported
properties (e.g. what formats and rotations it supports) and do many/all
possible combinations.

Best Regards,
~Arthur Grillo


>>
>> Thanks,
>> pq
>>
>>>> start printing YUV numbers separately as a new case.
>>>>
>>>>
>>>> Thanks,
>>>> pq
>>>>
>>>>>
>>>>>>
>>>>>>> +
>>>>>>> + sudo ./build/benchmarks/kms_fb_stress --device "sys:/sys/devices/platform/vkms"
>>>>>>> + sudo IGT_DEVICE="sys:/sys/devices/platform/vkms" ./build/benchmarks/kms_fb_stress
>>>>>>
>>>>>> Do people need to run both commands?
>>>>>
>>>>> No, they don't, just two options.
>>>>>
>>>>> Best Regards,
>>>>> ~Arthur Grillo
>>>>>
>>>>>>
>>>>>> Anyway, a good idea.
>>>>>>
>>>>>> Acked-by: Pekka Paalanen <[email protected]>
>>>>>>
>>>>>>
>>>>>> Thanks,
>>>>>> pq
>>>>>>
>>>>>>> +
>>>>>>> TODO
>>>>>>> ====
>>>>>>>
>>>>>>>
>>>>>>> ---
>>>>>>> base-commit: eeb8e8d9f124f279e80ae679f4ba6e822ce4f95f
>>>>>>> change-id: 20240226-bench-vkms-5b8b7aab255e
>>>>>>>
>>>>>>> Best regards,
>>>>>>
>>>>
>>
>
>
>