Add a node for blsp2_i2c3 which is used for type-C port control chips
and speaker codecs on some devices.
Signed-off-by: Yassine Oudjana <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 32 +++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 044db4ad2f3e..0cde4b7f863e 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1340,6 +1340,20 @@ blsp2_uart3_4pins_sleep: blsp2-uart2-4pins-sleep {
bias-disable;
};
+ blsp2_i2c3_default: blsp2-i2c3 {
+ pins = "gpio51", "gpio52";
+ function = "blsp_i2c9";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ blsp2_i2c3_sleep: blsp2-i2c3-sleep {
+ pins = "gpio51", "gpio52";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
wcd_intr_default: wcd-intr-default{
pins = "gpio54";
function = "gpio";
@@ -3023,6 +3037,24 @@ blsp2_i2c2: i2c@75b6000 {
status = "disabled";
};
+ blsp2_i2c3: i2c@75b7000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x075b7000 0x1000>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+ <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c3_default>;
+ pinctrl-1 = <&blsp2_i2c3_sleep>;
+ dmas = <&blsp2_dma 16>, <&blsp2_dma 17>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
blsp2_i2c5: i2c@75b9000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x75b9000 0x1000>;
--
2.32.0