Add support for the base Device Tree for Imagination Technologies'
Pistachio SoC.
This commit supports the following peripherals:
* Clocks
* Pinctrl and GPIO
* UART
* SPI
* I2C
* PWM
* ADC
* Watchdog
* Ethernet
* MMC
* DMA engine
* Crypto
* I2S
* SPDIF
* Internal DAC
* Timer
* USB
* IR
* Interrupt Controller
Signed-off-by: Rahul Bedarkar <[email protected]>
---
MAINTAINERS | 2 +-
arch/mips/boot/dts/img/pistachio.dtsi | 924 ++++++++++++++++++++++++++++++++++
2 files changed, 925 insertions(+), 1 deletion(-)
create mode 100644 arch/mips/boot/dts/img/pistachio.dtsi
diff --git a/MAINTAINERS b/MAINTAINERS
index 207eaef..98bcf06 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9509,7 +9509,7 @@ L: [email protected]
S: Maintained
F: arch/mips/pistachio/
F: arch/mips/include/asm/mach-pistachio/
-F: arch/mips/boot/dts/pistachio/
+F: arch/mips/boot/dts/img/pistachio*
F: arch/mips/configs/pistachio*_defconfig
PKTCDVD DRIVER
diff --git a/arch/mips/boot/dts/img/pistachio.dtsi b/arch/mips/boot/dts/img/pistachio.dtsi
new file mode 100644
index 0000000..57809f6
--- /dev/null
+++ b/arch/mips/boot/dts/img/pistachio.dtsi
@@ -0,0 +1,924 @@
+/*
+ * Copyright (C) 2015, 2016 Imagination Technologies Ltd.
+ * Copyright (C) 2015 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/pistachio-clk.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+#include <dt-bindings/reset/pistachio-resets.h>
+
+/ {
+ compatible = "img,pistachio";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "mti,interaptiv";
+ reg = <0>;
+ clocks = <&clk_core CLK_MIPS_PLL>;
+ clock-names = "cpu";
+ clock-latency = <1000>;
+ operating-points = <
+ /* kHz uV(dummy) */
+ 546000 1150000
+ 520000 1100000
+ 494000 1000000
+ 468000 950000
+ 442000 900000
+ 416000 800000
+ >;
+ };
+ };
+
+ i2c0: i2c@18100000 {
+ compatible = "img,scb-i2c";
+ reg = <0x18100000 0x200>;
+ interrupts = <GIC_SHARED 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_I2C0>,
+ <&cr_periph SYS_CLK_I2C0>;
+ clock-names = "scb", "sys";
+ assigned-clocks = <&clk_periph PERIPH_CLK_I2C0_PRE_DIV>,
+ <&clk_periph PERIPH_CLK_I2C0_DIV>;
+ assigned-clock-rates = <100000000>, <33333334>;
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@18100200 {
+ compatible = "img,scb-i2c";
+ reg = <0x18100200 0x200>;
+ interrupts = <GIC_SHARED 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_I2C1>,
+ <&cr_periph SYS_CLK_I2C1>;
+ clock-names = "scb", "sys";
+ assigned-clocks = <&clk_periph PERIPH_CLK_I2C1_PRE_DIV>,
+ <&clk_periph PERIPH_CLK_I2C1_DIV>;
+ assigned-clock-rates = <100000000>, <33333334>;
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@18100400 {
+ compatible = "img,scb-i2c";
+ reg = <0x18100400 0x200>;
+ interrupts = <GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_I2C2>,
+ <&cr_periph SYS_CLK_I2C2>;
+ clock-names = "scb", "sys";
+ assigned-clocks = <&clk_periph PERIPH_CLK_I2C2_PRE_DIV>,
+ <&clk_periph PERIPH_CLK_I2C2_DIV>;
+ assigned-clock-rates = <100000000>, <33333334>;
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c3: i2c@18100600 {
+ compatible = "img,scb-i2c";
+ reg = <0x18100600 0x200>;
+ interrupts = <GIC_SHARED 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_I2C3>,
+ <&cr_periph SYS_CLK_I2C3>;
+ clock-names = "scb", "sys";
+ assigned-clocks = <&clk_periph PERIPH_CLK_I2C3_PRE_DIV>,
+ <&clk_periph PERIPH_CLK_I2C3_DIV>;
+ assigned-clock-rates = <100000000>, <33333334>;
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2s_in: i2s-in@18100800 {
+ compatible = "img,i2s-in";
+ reg = <0x18100800 0x200>;
+ interrupts = <GIC_SHARED 7 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 30 0xffffffff 0>;
+ dma-names = "rx";
+ clocks = <&cr_periph SYS_CLK_I2S_IN>;
+ clock-names = "sys";
+ img,i2s-channels = <6>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s_in_pins>;
+ status = "disabled";
+
+ #sound-dai-cells = <0>;
+ };
+
+ i2s_out: i2s-out@18100a00 {
+ compatible = "img,i2s-out";
+ reg = <0x18100a00 0x200>;
+ interrupts = <GIC_SHARED 13 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 23 0xffffffff 0>;
+ dma-names = "tx";
+ clocks = <&cr_periph SYS_CLK_I2S_OUT>,
+ <&clk_core CLK_I2S>;
+ clock-names = "sys", "ref";
+ assigned-clocks = <&clk_core CLK_I2S_DIV>;
+ assigned-clock-rates = <12288000>;
+ img,i2s-channels = <6>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s_out_pins>;
+ status = "disabled";
+ resets = <&pistachio_reset PISTACHIO_RESET_I2S_OUT>;
+ reset-names = "rst";
+ #sound-dai-cells = <0>;
+ };
+
+ parallel_out: parallel-audio-out@18100c00 {
+ compatible = "img,parallel-out";
+ reg = <0x18100c00 0x100>;
+ interrupts = <GIC_SHARED 19 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 16 0xffffffff 0>;
+ dma-names = "tx";
+ clocks = <&cr_periph SYS_CLK_PAUD_OUT>,
+ <&clk_core CLK_AUDIO_DAC>;
+ clock-names = "sys", "ref";
+ assigned-clocks = <&clk_core CLK_AUDIO_DAC_DIV>;
+ assigned-clock-rates = <12288000>;
+ status = "disabled";
+ resets = <&pistachio_reset PISTACHIO_RESET_PRL_OUT>;
+ reset-names = "rst";
+ #sound-dai-cells = <0>;
+ };
+
+ spdif_out: spdif-out@18100d00 {
+ compatible = "img,spdif-out";
+ reg = <0x18100d00 0x100>;
+ interrupts = <GIC_SHARED 21 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 14 0xffffffff 0>;
+ dma-names = "tx";
+ clocks = <&cr_periph SYS_CLK_SPDIF_OUT>,
+ <&clk_core CLK_SPDIF>;
+ clock-names = "sys", "ref";
+ assigned-clocks = <&clk_core CLK_SPDIF_DIV>;
+ assigned-clock-rates = <12288000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_out_pin>;
+ status = "disabled";
+ resets = <&pistachio_reset PISTACHIO_RESET_SPDIF_OUT>;
+ reset-names = "rst";
+ #sound-dai-cells = <0>;
+ };
+
+ spdif_in: spdif-in@18100e00 {
+ compatible = "img,spdif-in";
+ reg = <0x18100e00 0x100>;
+ interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 15 0xffffffff 0>;
+ dma-names = "rx";
+ clocks = <&cr_periph SYS_CLK_SPDIF_IN>;
+ clock-names = "sys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spdif_in_pin>;
+ status = "disabled";
+
+ #sound-dai-cells = <0>;
+ };
+
+ internal_dac: internal-dac {
+ compatible = "img,pistachio-internal-dac";
+ img,cr-top = <&cr_top>;
+ img,voltage-select = <1>;
+
+ #sound-dai-cells = <0>;
+ };
+
+ spfi0: spi@18100f00 {
+ compatible = "img,spfi";
+ reg = <0x18100f00 0x100>;
+ interrupts = <GIC_SHARED 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_core CLK_SPI0>, <&cr_periph SYS_CLK_SPI0_MASTER>;
+ clock-names = "sys", "spfi";
+ dmas = <&mdc 9 0xffffffff 0>, <&mdc 10 0xffffffff 0>;
+ dma-names = "rx", "tx";
+ spfi-max-frequency = <50000000>;
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spfi1: spi@18101000 {
+ compatible = "img,spfi";
+ reg = <0x18101000 0x100>;
+ interrupts = <GIC_SHARED 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_core CLK_SPI1>, <&cr_periph SYS_CLK_SPI1>;
+ clock-names = "sys", "spfi";
+ dmas = <&mdc 1 0xffffffff 0>, <&mdc 2 0xffffffff 0>;
+ dma-names = "rx", "tx";
+ img,supports-quad-mode;
+ spfi-max-frequency = <50000000>;
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ pwm: pwm@18101300 {
+ compatible = "img,pistachio-pwm";
+ reg = <0x18101300 0x100>;
+ clocks = <&clk_periph PERIPH_CLK_PWM>,
+ <&cr_periph SYS_CLK_PWM>;
+ clock-names = "pwm", "sys";
+ img,cr-periph = <&cr_periph>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ uart0: uart@18101400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18101400 0x100>;
+ interrupts = <GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_core CLK_UART0>, <&cr_periph SYS_CLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ assigned-clocks = <&clk_core CLK_UART0_INTERNAL_DIV>,
+ <&clk_core CLK_UART0_DIV>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-0 = <&uart0_pins>, <&uart0_rts_cts_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ uart1: uart@18101500 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18101500 0x100>;
+ interrupts = <GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_core CLK_UART1>, <&cr_periph SYS_CLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ assigned-clocks = <&clk_core CLK_UART1_INTERNAL_DIV>,
+ <&clk_core CLK_UART1_DIV>;
+ assigned-clock-rates = <114278400>, <1843200>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ adc: adc@18101600 {
+ compatible = "cosmic,10001-adc";
+ reg = <0x18101600 0x24>;
+ adc-reserved-channels = <0x30>;
+ clocks = <&clk_core CLK_AUX_ADC>;
+ clock-names = "adc";
+ assigned-clocks = <&clk_core CLK_AUX_ADC_INTERNAL_DIV>,
+ <&clk_core CLK_AUX_ADC_DIV>;
+ assigned-clock-rates = <100000000>, <1000000>;
+ status = "disabled";
+
+ #io-channel-cells = <1>;
+ };
+
+ pinctrl: pinctrl@18101c00 {
+ compatible = "img,pistachio-system-pinctrl";
+ reg = <0x18101c00 0x400>;
+
+ gpio0: gpio0 {
+ interrupts = <GIC_SHARED 71 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio1 {
+ interrupts = <GIC_SHARED 72 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio2 {
+ interrupts = <GIC_SHARED 73 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio3 {
+ interrupts = <GIC_SHARED 74 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio4 {
+ interrupts = <GIC_SHARED 75 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio5: gpio5 {
+ interrupts = <GIC_SHARED 76 IRQ_TYPE_LEVEL_HIGH>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl 0 80 10>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ i2c0_pins: i2c0-pins {
+ pin_i2c0: i2c0 {
+ pins = "mfio28", "mfio29";
+ function = "i2c0";
+ drive-strength = <4>;
+ };
+ };
+
+ i2c1_pins: i2c1-pins {
+ pin_i2c1: i2c1 {
+ pins = "mfio30", "mfio31";
+ function = "i2c1";
+ drive-strength = <4>;
+ };
+ };
+
+ i2c2_pins: i2c2-pins {
+ pin_i2c2: i2c2 {
+ pins = "mfio32", "mfio33";
+ function = "i2c2";
+ drive-strength = <4>;
+ };
+ };
+
+ i2c3_pins: i2c3-pins {
+ pin_i2c3: i2c3 {
+ pins = "mfio34", "mfio35";
+ function = "i2c3";
+ drive-strength = <4>;
+ };
+ };
+
+ spim0_pins: spim0-pins {
+ pin_spim0: spim0 {
+ pins = "mfio9", "mfio10";
+ function = "spim0";
+ drive-strength = <4>;
+ };
+ spim0_clk: spim0-clk {
+ pins = "mfio8";
+ function = "spim0";
+ drive-strength = <4>;
+ };
+ };
+
+ spim0_cs0_alt_pin: spim0-cs0-alt-pin {
+ spim0-cs0 {
+ pins = "mfio2";
+ drive-strength = <2>;
+ };
+ };
+
+ spim0_cs1_pin: spim0-cs1-pin {
+ spim0-cs1 {
+ pins = "mfio1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim0_cs2_pin: spim0-cs2-pin {
+ spim0-cs2 {
+ pins = "mfio55";
+ drive-strength = <2>;
+ };
+ };
+
+ spim0_cs2_alt_pin: spim0-cs2-alt-pin {
+ spim0-cs2 {
+ pins = "mfio28";
+ drive-strength = <2>;
+ };
+ };
+
+ spim0_cs3_pin: spim0-cs3-pin {
+ spim0-cs3 {
+ pins = "mfio56";
+ drive-strength = <2>;
+ };
+ };
+
+ spim0_cs3_alt_pin: spim0-cs3-alt-pin {
+ spim0-cs3 {
+ pins = "mfio29";
+ drive-strength = <2>;
+ };
+ };
+
+ spim0_cs4_pin: spim0-cs4-pin {
+ spim0-cs4 {
+ pins = "mfio57";
+ drive-strength = <2>;
+ };
+ };
+
+ spim0_cs4_alt_pin: spim0-cs4-alt-pin {
+ spim0-cs4 {
+ pins = "mfio30";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_pins: spim1-pins {
+ spim1 {
+ pins = "mfio3", "mfio4", "mfio5";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_quad_pins: spim1-quad-pins {
+ spim1-quad {
+ pins = "mfio6", "mfio7";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs0_pin: spim1-cs0-pins {
+ spim1-cs0 {
+ pins = "mfio0";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs1_pin: spim1-cs1-pin {
+ spim1-cs1 {
+ pins = "mfio1";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs1_alt_pin: spim1-cs1-alt-pin {
+ spim1-cs1 {
+ pins = "mfio58";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs2_pin: spim1-cs2-pin {
+ spim1-cs2 {
+ pins = "mfio2";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs2_alt0_pin: spim1-cs2-alt0-pin {
+ spim1-cs2 {
+ pins = "mfio31";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs2_alt1_pin: spim1-cs2-alt1-pin {
+ spim1-cs2 {
+ pins = "mfio55";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs3_pin: spim1-cs3-pin {
+ spim1-cs3 {
+ pins = "mfio56";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ spim1_cs4_pin: spim1-cs4-pin {
+ spim1-cs4 {
+ pins = "mfio57";
+ function = "spim1";
+ drive-strength = <2>;
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ uart0 {
+ pins = "mfio55", "mfio56";
+ function = "uart0";
+ drive-strength = <2>;
+ };
+ };
+
+ uart0_rts_cts_pins: uart0-rts-cts-pins {
+ uart0-rts-cts {
+ pins = "mfio57", "mfio58";
+ function = "uart0";
+ drive-strength = <2>;
+ };
+ };
+
+ uart1_pins: uart1-pins {
+ uart1 {
+ pins = "mfio59", "mfio60";
+ function = "uart1";
+ drive-strength = <2>;
+ };
+ };
+
+ uart1_rts_cts_pins: uart1-rts-cts-pins {
+ uart1-rts-cts {
+ pins = "mfio1", "mfio2";
+ function = "uart1";
+ drive-strength = <2>;
+ };
+ };
+
+ enet_pins: enet-pins {
+ pin_enet: enet {
+ pins = "mfio63", "mfio64", "mfio65", "mfio66",
+ "mfio67", "mfio68", "mfio69", "mfio70";
+ function = "eth";
+ slew-rate = <1>;
+ drive-strength = <4>;
+ };
+ pin_enet_phy_clk: enet-phy-clk {
+ pins = "mfio71";
+ function = "eth";
+ slew-rate = <1>;
+ drive-strength = <8>;
+ };
+ };
+
+ sdhost_pins: sdhost-pins {
+ pin_sdhost_clk: sdhost-clk {
+ pins = "mfio15";
+ function = "sdhost";
+ slew-rate = <1>;
+ drive-strength = <4>;
+ };
+ pin_sdhost_cmd: sdhost-cmd {
+ pins = "mfio16";
+ function = "sdhost";
+ slew-rate = <1>;
+ drive-strength = <4>;
+ };
+ pin_sdhost_data: sdhost-data {
+ pins = "mfio17", "mfio18", "mfio19", "mfio20",
+ "mfio21", "mfio22", "mfio23", "mfio24";
+ function = "sdhost";
+ slew-rate = <1>;
+ drive-strength = <4>;
+ };
+ pin_sdhost_power_select: sdhost-power-select {
+ pins = "mfio25";
+ function = "sdhost";
+ slew-rate = <1>;
+ drive-strength = <2>;
+ };
+ pin_sdhost_card_detect: sdhost-card-detect {
+ pins = "mfio26";
+ function = "sdhost";
+ drive-strength = <2>;
+ };
+ pin_sdhost_write_protect: sdhost-write-protect {
+ pins = "mfio27";
+ function = "sdhost";
+ drive-strength = <2>;
+ };
+ };
+
+ ir_pin: ir-pin {
+ ir-data {
+ pins = "mfio72";
+ function = "ir";
+ drive-strength = <2>;
+ };
+ };
+
+ pwmpdm0_pin: pwmpdm0-pin {
+ pwmpdm0 {
+ pins = "mfio73";
+ function = "pwmpdm";
+ drive-strength = <2>;
+ };
+ };
+
+ pwmpdm1_pin: pwmpdm1-pin {
+ pwmpdm1 {
+ pins = "mfio74";
+ function = "pwmpdm";
+ drive-strength = <2>;
+ };
+ };
+
+ pwmpdm2_pin: pwmpdm2-pin {
+ pwmpdm2 {
+ pins = "mfio75";
+ function = "pwmpdm";
+ drive-strength = <2>;
+ };
+ };
+
+ pwmpdm3_pin: pwmpdm3-pin {
+ pwmpdm3 {
+ pins = "mfio76";
+ function = "pwmpdm";
+ drive-strength = <2>;
+ };
+ };
+
+ dac_clk_pin: dac-clk-pin {
+ pin_dac_clk: dac-clk {
+ pins = "mfio45";
+ function = "i2s_dac_clk";
+ drive-strength = <4>;
+ };
+ };
+
+ i2s_mclk_pin: i2s-mclk-pin {
+ pin_i2s_mclk: i2s-mclk {
+ pins = "mfio36";
+ function = "i2s_out";
+ drive-strength = <4>;
+ };
+ };
+
+ spdif_out_pin: spdif-out-pin {
+ spdif-out {
+ pins = "mfio61";
+ function = "spdif_out";
+ slew-rate = <1>;
+ drive-strength = <2>;
+ };
+ };
+
+ spdif_in_pin: spdif-in-pin {
+ spdif-in {
+ pins = "mfio62";
+ function = "spdif_in";
+ drive-strength = <2>;
+ };
+ };
+
+ i2s_out_pins: i2s-out-pins {
+ pins_i2s_out_clk: i2s-out-clk {
+ pins = "mfio37", "mfio38";
+ function = "i2s_out";
+ drive-strength = <4>;
+ };
+ pins_i2s_out: i2s-out {
+ pins = "mfio39", "mfio40",
+ "mfio41", "mfio42",
+ "mfio43", "mfio44";
+ function = "i2s_out";
+ drive-strength = <2>;
+ };
+ };
+
+ i2s_in_pins: i2s-in-pins {
+ i2s-in {
+ pins = "mfio47", "mfio48", "mfio49",
+ "mfio50", "mfio51", "mfio52",
+ "mfio53", "mfio54";
+ function = "i2s_in";
+ drive-strength = <2>;
+ };
+ };
+ };
+
+ timer: timer@18102000 {
+ compatible = "img,pistachio-gptimer";
+ reg = <0x18102000 0x100>;
+ interrupts = <GIC_SHARED 60 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_COUNTER_FAST>,
+ <&cr_periph SYS_CLK_TIMER>;
+ clock-names = "fast", "sys";
+ img,cr-periph = <&cr_periph>;
+ };
+
+ wdt: watchdog@18102100 {
+ compatible = "img,pdc-wdt";
+ reg = <0x18102100 0x100>;
+ interrupts = <GIC_SHARED 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_WD>, <&cr_periph SYS_CLK_WD>;
+ clock-names = "wdt", "sys";
+ assigned-clocks = <&clk_periph PERIPH_CLK_WD_PRE_DIV>,
+ <&clk_periph PERIPH_CLK_WD_DIV>;
+ assigned-clock-rates = <4000000>, <32768>;
+ };
+
+ ir: ir@18102200 {
+ compatible = "img,ir-rev1";
+ reg = <0x18102200 0x100>;
+ interrupts = <GIC_SHARED 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_periph PERIPH_CLK_IR>, <&cr_periph SYS_CLK_IR>;
+ clock-names = "core", "sys";
+ assigned-clocks = <&clk_periph PERIPH_CLK_IR_PRE_DIV>,
+ <&clk_periph PERIPH_CLK_IR_DIV>;
+ assigned-clock-rates = <4000000>, <32768>;
+ pinctrl-0 = <&ir_pin>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
+ usb: usb@18120000 {
+ compatible = "snps,dwc2";
+ reg = <0x18120000 0x1c000>;
+ interrupts = <GIC_SHARED 49 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb_phy>;
+ phy-names = "usb2-phy";
+ g-tx-fifo-size = <256 256 256 256>;
+ status = "disabled";
+ };
+
+ enet: ethernet@18140000 {
+ compatible = "snps,dwmac";
+ reg = <0x18140000 0x2000>;
+ interrupts = <GIC_SHARED 50 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clocks = <&clk_core CLK_ENET>, <&cr_periph SYS_CLK_ENET>;
+ clock-names = "stmmaceth", "pclk";
+ assigned-clocks = <&clk_core CLK_ENET_MUX>,
+ <&clk_core CLK_ENET_DIV>;
+ assigned-clock-parents = <&clk_core CLK_SYS_INTERNAL_DIV>;
+ assigned-clock-rates = <0>, <50000000>;
+ pinctrl-0 = <&enet_pins>;
+ pinctrl-names = "default";
+ phy-mode = "rmii";
+ status = "disabled";
+ };
+
+ sdhost: mmc@18142000 {
+ compatible = "img,pistachio-dw-mshc";
+ reg = <0x18142000 0x400>;
+ interrupts = <GIC_SHARED 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_core CLK_SD_HOST>, <&cr_periph SYS_CLK_SD_HOST>;
+ clock-names = "ciu", "biu";
+ pinctrl-0 = <&sdhost_pins>;
+ pinctrl-names = "default";
+ fifo-depth = <0x20>;
+ num-slots = <1>;
+ clock-frequency = <50000000>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ status = "disabled";
+ };
+
+ sram: sram@1b000000 {
+ compatible = "mmio-sram";
+ reg = <0x1b000000 0x10000>;
+ };
+
+ mdc: dma-controller@18143000 {
+ compatible = "img,pistachio-mdc-dma";
+ reg = <0x18143000 0x1000>;
+ interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 29 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 32 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 33 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 34 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 36 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 37 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cr_periph SYS_CLK_MDC>;
+ clock-names = "sys";
+
+ img,max-burst-multiplier = <16>;
+ img,cr-periph = <&cr_periph>;
+
+ #dma-cells = <3>;
+ };
+
+ clk_core: clk@18144000 {
+ compatible = "img,pistachio-clk", "syscon";
+ clocks = <&xtal>, <&cr_top EXT_CLK_AUDIO_IN>,
+ <&cr_top EXT_CLK_ENET_IN>;
+ clock-names = "xtal", "audio_refclk_ext_gate",
+ "ext_enet_in_gate";
+ reg = <0x18144000 0x800>;
+ #clock-cells = <1>;
+ };
+
+ clk_periph: clk@18144800 {
+ compatible = "img,pistachio-clk-periph";
+ reg = <0x18144800 0x1000>;
+ clocks = <&clk_core CLK_PERIPH_SYS>;
+ clock-names = "periph_sys_core";
+ #clock-cells = <1>;
+ };
+
+ cr_periph: clk@18148000 {
+ compatible = "img,pistachio-cr-periph", "syscon", "simple-bus";
+ reg = <0x18148000 0x1000>;
+ clocks = <&clk_periph PERIPH_CLK_SYS>;
+ clock-names = "sys";
+ #clock-cells = <1>;
+
+ pistachio_reset: reset-controller {
+ compatible = "img,pistachio-reset";
+ #reset-cells = <1>;
+ };
+ };
+
+ cr_top: clk@18149000 {
+ compatible = "img,pistachio-cr-top", "syscon";
+ reg = <0x18149000 0x200>;
+ #clock-cells = <1>;
+ };
+
+ hash: hash@18149600 {
+ compatible = "img,hash-accelerator";
+ reg = <0x18149600 0x100>, <0x18101100 0x4>;
+ interrupts = <GIC_SHARED 59 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 8 0xffffffff 0>;
+ dma-names = "tx";
+ clocks = <&cr_periph SYS_CLK_HASH>,
+ <&clk_periph PERIPH_CLK_ROM>;
+ clock-names = "sys", "hash";
+ };
+
+ gic: interrupt-controller@1bdc0000 {
+ compatible = "mti,gic";
+ reg = <0x1bdc0000 0x20000>;
+
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ timer {
+ compatible = "mti,gic-timer";
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+ clocks = <&clk_core CLK_MIPS>;
+ };
+ };
+
+ usb_phy: usb-phy {
+ compatible = "img,pistachio-usb-phy";
+ clocks = <&clk_core CLK_USB_PHY>;
+ clock-names = "usb_phy";
+ assigned-clocks = <&clk_core CLK_USB_PHY_DIV>;
+ assigned-clock-rates = <50000000>;
+ img,refclk = <0x2>;
+ img,cr-top = <&cr_top>;
+ #phy-cells = <0>;
+ };
+
+ xtal: xtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <52000000>;
+ clock-output-names = "xtal";
+ };
+};
--
2.6.2
Add support for Imagination Technologies' Marduk board which is based
on Pistachio SoC. It is also known as Creator Ci40. Marduk is legacy
name and will be there for decades.
Documentation for this board can be found on
https://docs.creatordev.io/ci40/
This patch adds initial support for board with following peripherals:
* PWM based heartbeat LED
* GPIO based buttons
* SPI NOR flash on SPI1
* UART0 and UART1
* SD card
* Ethernet
* USB
* PWM
* ADC
* I2C
Signed-off-by: Rahul Bedarkar <[email protected]>
---
.../bindings/mips/img/pistachio-marduk.txt | 10 ++
MAINTAINERS | 6 +
arch/mips/boot/dts/img/Makefile | 9 ++
arch/mips/boot/dts/img/pistachio_marduk.dts | 163 +++++++++++++++++++++
4 files changed, 188 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt
create mode 100644 arch/mips/boot/dts/img/Makefile
create mode 100644 arch/mips/boot/dts/img/pistachio_marduk.dts
diff --git a/Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt b/Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt
new file mode 100644
index 0000000..2d5126d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt
@@ -0,0 +1,10 @@
+Imagination Technologies' Pistachio SoC based Marduk Board
+==========================================================
+
+Compatible string must be "img,pistachio-marduk", "img,pistachio"
+
+Hardware and other related documentation is available at
+https://docs.creatordev.io/ci40/
+
+It is also known as Creator Ci40. Marduk is legacy name and will
+be there for decades.
diff --git a/MAINTAINERS b/MAINTAINERS
index 98bcf06..8e6c962b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7515,6 +7515,12 @@ W: http://www.kernel.org/doc/man-pages
L: [email protected]
S: Maintained
+MARDUK (CREATOR CI40) DEVICE TREE SUPPORT
+M: Rahul Bedarkar <[email protected]>
+L: [email protected]
+S: Maintained
+F: arch/mips/boot/dts/img/pistachio_marduk.dts
+
MARVELL 88E6XXX ETHERNET SWITCH FABRIC DRIVER
M: Andrew Lunn <[email protected]>
M: Vivien Didelot <[email protected]>
diff --git a/arch/mips/boot/dts/img/Makefile b/arch/mips/boot/dts/img/Makefile
new file mode 100644
index 0000000..69a65f0
--- /dev/null
+++ b/arch/mips/boot/dts/img/Makefile
@@ -0,0 +1,9 @@
+dtb-$(CONFIG_MACH_PISTACHIO) += pistachio_marduk.dtb
+
+obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj- += dummy.o
+
+always := $(dtb-y)
+clean-files := *.dtb *.dtb.S
diff --git a/arch/mips/boot/dts/img/pistachio_marduk.dts b/arch/mips/boot/dts/img/pistachio_marduk.dts
new file mode 100644
index 0000000..378381e
--- /dev/null
+++ b/arch/mips/boot/dts/img/pistachio_marduk.dts
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2015, 2016 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * IMG Marduk board is also known as Creator Ci40.
+ */
+
+/dts-v1/;
+
+#include "pistachio.dtsi"
+
+/ {
+ model = "IMG Marduk (Creator Ci40)";
+ compatible = "img,pistachio-marduk", "img,pistachio";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ ethernet0 = &enet;
+ spi0 = &spfi0;
+ spi1 = &spfi1;
+ };
+
+ chosen {
+ bootargs = "root=/dev/sda1 rootwait ro lpj=723968";
+ stdout-path = "serial1:115200";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>;
+ };
+
+ reg_1v8: fixed-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "aux_adc_vref";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ internal_dac_supply: internal_dac_supply {
+ compatible = "regulator-fixed";
+ regulator-name = "internal_dac_supply";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pwm_leds {
+ compatible = "pwm-leds";
+ heartbeat {
+ label = "marduk:red:heartbeat";
+ pwms = <&pwm 3 300000>;
+ max-brightness = <255>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ button@1 {
+ label = "Button 1";
+ linux,code = <0x101>; /* BTN_1 */
+ gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+ };
+ button@2 {
+ label = "Button 2";
+ linux,code = <0x102>; /* BTN_2 */
+ gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&internal_dac {
+ VDD-supply = <&internal_dac_supply>;
+};
+
+&spfi1 {
+ status = "okay";
+
+ pinctrl-0 = <&spim1_pins>, <&spim1_quad_pins>, <&spim1_cs0_pin>,
+ <&spim1_cs1_pin>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>, <&gpio0 1 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+ assigned-clock-rates = <114278400>, <1843200>;
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&enet {
+ status = "okay";
+};
+
+&pin_enet {
+ drive-strength = <2>;
+};
+
+&pin_enet_phy_clk {
+ drive-strength = <2>;
+};
+
+&sdhost {
+ status = "okay";
+ bus-width = <4>;
+ disable-wp;
+};
+
+&pin_sdhost_cmd {
+ drive-strength = <2>;
+};
+
+&pin_sdhost_data {
+ drive-strength = <2>;
+};
+
+&pwm {
+ status = "okay";
+
+ pinctrl-0 = <&pwmpdm0_pin>, <&pwmpdm1_pin>, <&pwmpdm2_pin>,
+ <&pwmpdm3_pin>;
+ pinctrl-names = "default";
+};
+
+&adc {
+ status = "okay";
+ vref-supply = <®_1v8>;
+ adc-reserved-channels = <0x10>;
+};
+
+&i2c2 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tpm@20 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x20>;
+ };
+
+};
+
+&i2c3 {
+ status = "okay";
+ clock-frequency = <400000>;
+};
--
2.6.2
On Thu, Oct 06, 2016 at 06:01:34PM +0530, Rahul Bedarkar wrote:
> Add support for Imagination Technologies' Marduk board which is based
> on Pistachio SoC. It is also known as Creator Ci40. Marduk is legacy
> name and will be there for decades.
>
> Documentation for this board can be found on
> https://docs.creatordev.io/ci40/
>
> This patch adds initial support for board with following peripherals:
>
> * PWM based heartbeat LED
> * GPIO based buttons
> * SPI NOR flash on SPI1
> * UART0 and UART1
> * SD card
> * Ethernet
> * USB
> * PWM
> * ADC
> * I2C
>
> Signed-off-by: Rahul Bedarkar <[email protected]>
> ---
> .../bindings/mips/img/pistachio-marduk.txt | 10 ++
> MAINTAINERS | 6 +
> arch/mips/boot/dts/img/Makefile | 9 ++
> arch/mips/boot/dts/img/pistachio_marduk.dts | 163 +++++++++++++++++++++
> 4 files changed, 188 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt
> create mode 100644 arch/mips/boot/dts/img/Makefile
> create mode 100644 arch/mips/boot/dts/img/pistachio_marduk.dts
>
> diff --git a/Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt b/Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt
> new file mode 100644
> index 0000000..2d5126d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mips/img/pistachio-marduk.txt
> @@ -0,0 +1,10 @@
> +Imagination Technologies' Pistachio SoC based Marduk Board
> +==========================================================
> +
> +Compatible string must be "img,pistachio-marduk", "img,pistachio"
> +
> +Hardware and other related documentation is available at
> +https://docs.creatordev.io/ci40/
> +
> +It is also known as Creator Ci40. Marduk is legacy name and will
> +be there for decades.
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 98bcf06..8e6c962b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -7515,6 +7515,12 @@ W: http://www.kernel.org/doc/man-pages
> L: [email protected]
> S: Maintained
>
> +MARDUK (CREATOR CI40) DEVICE TREE SUPPORT
> +M: Rahul Bedarkar <[email protected]>
> +L: [email protected]
> +S: Maintained
> +F: arch/mips/boot/dts/img/pistachio_marduk.dts
> +
> MARVELL 88E6XXX ETHERNET SWITCH FABRIC DRIVER
> M: Andrew Lunn <[email protected]>
> M: Vivien Didelot <[email protected]>
> diff --git a/arch/mips/boot/dts/img/Makefile b/arch/mips/boot/dts/img/Makefile
> new file mode 100644
> index 0000000..69a65f0
> --- /dev/null
> +++ b/arch/mips/boot/dts/img/Makefile
> @@ -0,0 +1,9 @@
> +dtb-$(CONFIG_MACH_PISTACHIO) += pistachio_marduk.dtb
> +
> +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
> +
> +# Force kbuild to make empty built-in.o if necessary
> +obj- += dummy.o
> +
> +always := $(dtb-y)
> +clean-files := *.dtb *.dtb.S
> diff --git a/arch/mips/boot/dts/img/pistachio_marduk.dts b/arch/mips/boot/dts/img/pistachio_marduk.dts
> new file mode 100644
> index 0000000..378381e
> --- /dev/null
> +++ b/arch/mips/boot/dts/img/pistachio_marduk.dts
> @@ -0,0 +1,163 @@
> +/*
> + * Copyright (C) 2015, 2016 Imagination Technologies Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * IMG Marduk board is also known as Creator Ci40.
> + */
> +
> +/dts-v1/;
> +
> +#include "pistachio.dtsi"
> +
> +/ {
> + model = "IMG Marduk (Creator Ci40)";
> + compatible = "img,pistachio-marduk", "img,pistachio";
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + ethernet0 = &enet;
> + spi0 = &spfi0;
> + spi1 = &spfi1;
> + };
> +
> + chosen {
> + bootargs = "root=/dev/sda1 rootwait ro lpj=723968";
> + stdout-path = "serial1:115200";
> + };
> +
> + memory {
Is 0 the actual base, or that gets filled in by bootloader? If the
formet, add unit address.
> + device_type = "memory";
> + reg = <0x00000000 0x08000000>;
> + };
> +
> + reg_1v8: fixed-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "aux_adc_vref";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + };
> +
> + internal_dac_supply: internal_dac_supply {
Don't use '_' in node names.
> + compatible = "regulator-fixed";
> + regulator-name = "internal_dac_supply";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pwm_leds {
Just 'leds'.
> + compatible = "pwm-leds";
> + heartbeat {
> + label = "marduk:red:heartbeat";
> + pwms = <&pwm 3 300000>;
> + max-brightness = <255>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +
> + gpio_keys {
keys {
> + compatible = "gpio-keys";
> + button@1 {
> + label = "Button 1";
> + linux,code = <0x101>; /* BTN_1 */
> + gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
> + };
> + button@2 {
> + label = "Button 2";
> + linux,code = <0x102>; /* BTN_2 */
> + gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
> + };
> + };
> +};
> +
> +&internal_dac {
> + VDD-supply = <&internal_dac_supply>;
> +};
> +
> +&spfi1 {
> + status = "okay";
> +
> + pinctrl-0 = <&spim1_pins>, <&spim1_quad_pins>, <&spim1_cs0_pin>,
> + <&spim1_cs1_pin>;
> + pinctrl-names = "default";
> + cs-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>, <&gpio0 1 GPIO_ACTIVE_HIGH>;
> +
> + flash@0 {
> + compatible = "jedec,spi-nor";
This should have the specific part too.
> + reg = <0>;
> + spi-max-frequency = <50000000>;
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> + assigned-clock-rates = <114278400>, <1843200>;
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&usb {
> + status = "okay";
> +};
> +
> +&enet {
> + status = "okay";
> +};
> +
> +&pin_enet {
> + drive-strength = <2>;
> +};
> +
> +&pin_enet_phy_clk {
> + drive-strength = <2>;
> +};
> +
> +&sdhost {
> + status = "okay";
> + bus-width = <4>;
> + disable-wp;
> +};
> +
> +&pin_sdhost_cmd {
> + drive-strength = <2>;
> +};
> +
> +&pin_sdhost_data {
> + drive-strength = <2>;
> +};
> +
> +&pwm {
> + status = "okay";
> +
> + pinctrl-0 = <&pwmpdm0_pin>, <&pwmpdm1_pin>, <&pwmpdm2_pin>,
> + <&pwmpdm3_pin>;
> + pinctrl-names = "default";
> +};
> +
> +&adc {
> + status = "okay";
> + vref-supply = <®_1v8>;
> + adc-reserved-channels = <0x10>;
> +};
> +
> +&i2c2 {
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + tpm@20 {
> + compatible = "infineon,slb9645tt";
> + reg = <0x20>;
> + };
> +
> +};
> +
> +&i2c3 {
> + status = "okay";
> + clock-frequency = <400000>;
> +};
> --
> 2.6.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi,
On Monday 10 October 2016 07:51 PM, Rob Herring wrote:
>> +
>> + memory {
>
> Is 0 the actual base, or that gets filled in by bootloader? If the
> formet, add unit address.
>
Bootloader (uboot) can override or fixup memory node. But with version
of bootloader I tested with, base address is hardcoded to 0 and only
size may get changed. But since booloader can override or fixup memory
node, I assume we don't add unit address in this case.
>> + device_type = "memory";
>> + reg = <0x00000000 0x08000000>;
I now realized that size is incorrectly specified in memory node. It
should be 256MB and not 128MB. I will fix this in v2.
Thanks,
Rahul
Hi Rahul,
> -----Original Message-----
> From: Rahul Bedarkar
> Sent: 13 October 2016 08:02
> To: Rob Herring
> Cc: Ralf Baechle; Mark Rutland; James Hartley; [email protected];
> [email protected]; [email protected]
> Subject: Re: [PATCH 2/2] MIPS: DTS: img: add device tree for Marduk board
>
> Hi,
>
> On Monday 10 October 2016 07:51 PM, Rob Herring wrote:
> >> +
> >> + memory {
> >
> > Is 0 the actual base, or that gets filled in by bootloader? If the
> > formet, add unit address.
> >
>
> Bootloader (uboot) can override or fixup memory node. But with version of
> bootloader I tested with, base address is hardcoded to 0 and only size may
> get changed. But since booloader can override or fixup memory node, I
> assume we don't add unit address in this case.
>
> >> + device_type = "memory";
> >> + reg = <0x00000000 0x08000000>;
>
> I now realized that size is incorrectly specified in memory node. It should be
> 256MB and not 128MB. I will fix this in v2.
This is board dependent, and since you have already explained that the boot loader is expected to configure this, I would recommend leaving it at 128MB (which I believe is the size of the smallest DDR part in use on existing boards). This would mean that if for some reason the boot loader did not adjust the settings, it would still boot on all currently known boards.
James.
>
> Thanks,
> Rahul
Hi Rahul,
> -----Original Message-----
> From: [email protected] [mailto:linux-mips-bounce@linux-
> mips.org] On Behalf Of James Hartley
> Sent: 13 October 2016 09:50
> To: Rahul Bedarkar; Rob Herring
> Cc: Ralf Baechle; Mark Rutland; [email protected];
> [email protected]; [email protected]
> Subject: RE: [PATCH 2/2] MIPS: DTS: img: add device tree for Marduk board
>
> Hi Rahul,
>
> > -----Original Message-----
> > From: Rahul Bedarkar
> > Sent: 13 October 2016 08:02
> > To: Rob Herring
> > Cc: Ralf Baechle; Mark Rutland; James Hartley;
> > [email protected]; [email protected];
> > [email protected]
> > Subject: Re: [PATCH 2/2] MIPS: DTS: img: add device tree for Marduk
> > board
> >
> > Hi,
> >
> > On Monday 10 October 2016 07:51 PM, Rob Herring wrote:
> > >> +
> > >> + memory {
> > >
> > > Is 0 the actual base, or that gets filled in by bootloader? If the
> > > formet, add unit address.
> > >
> >
> > Bootloader (uboot) can override or fixup memory node. But with version
> > of bootloader I tested with, base address is hardcoded to 0 and only
> > size may get changed. But since booloader can override or fixup memory
> > node, I assume we don't add unit address in this case.
> >
> > >> + device_type = "memory";
> > >> + reg = <0x00000000 0x08000000>;
> >
> > I now realized that size is incorrectly specified in memory node. It
> > should be 256MB and not 128MB. I will fix this in v2.
>
> This is board dependent, and since you have already explained that the boot
> loader is expected to configure this, I would recommend leaving it at 128MB
> (which I believe is the size of the smallest DDR part in use on existing boards).
> This would mean that if for some reason the boot loader did not adjust the
> settings, it would still boot on all currently known boards.
So it seems the 128MB boards are not CI40 based, so since this dts is CI40 specific, it's fine to have 256MB.
James.
>
> James.
>
> >
> > Thanks,
> > Rahul