To be able to account the amount of memory a process is keeping pinned
by open file descriptors add a 'size' field to fdinfo output.
dmabufs fds already expose a 'size' field for this reason, remove this
and make it a common field for all fds. This allows tracking of
other types of memory (e.g. memfd and ashmem in Android).
Signed-off-by: Kalesh Singh <[email protected]>
---
Changes from rfc:
- Split adding 'size' and 'path' into a separate patches, per Christian
- Split fdinfo seq_printf into separate lines, per Christian
- Fix indentation (use tabs) in documentaion, per Randy
Documentation/filesystems/proc.rst | 12 ++++++++++--
drivers/dma-buf/dma-buf.c | 1 -
fs/proc/fd.c | 9 +++++----
3 files changed, 15 insertions(+), 7 deletions(-)
diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst
index 1bc91fb8c321..779c05528e87 100644
--- a/Documentation/filesystems/proc.rst
+++ b/Documentation/filesystems/proc.rst
@@ -1886,13 +1886,14 @@ if precise results are needed.
3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file
---------------------------------------------------------------
This file provides information associated with an opened file. The regular
-files have at least four fields -- 'pos', 'flags', 'mnt_id' and 'ino'.
+files have at least five fields -- 'pos', 'flags', 'mnt_id', 'ino', and 'size'.
+
The 'pos' represents the current offset of the opened file in decimal
form [see lseek(2) for details], 'flags' denotes the octal O_xxx mask the
file has been created with [see open(2) for details] and 'mnt_id' represents
mount ID of the file system containing the opened file [see 3.5
/proc/<pid>/mountinfo for details]. 'ino' represents the inode number of
-the file.
+the file, and 'size' represents the size of the file in bytes.
A typical output is::
@@ -1900,6 +1901,7 @@ A typical output is::
flags: 0100002
mnt_id: 19
ino: 63107
+ size: 0
All locks associated with a file descriptor are shown in its fdinfo too::
@@ -1917,6 +1919,7 @@ Eventfd files
flags: 04002
mnt_id: 9
ino: 63107
+ size: 0
eventfd-count: 5a
where 'eventfd-count' is hex value of a counter.
@@ -1930,6 +1933,7 @@ Signalfd files
flags: 04002
mnt_id: 9
ino: 63107
+ size: 0
sigmask: 0000000000000200
where 'sigmask' is hex value of the signal mask associated
@@ -1944,6 +1948,7 @@ Epoll files
flags: 02
mnt_id: 9
ino: 63107
+ size: 0
tfd: 5 events: 1d data: ffffffffffffffff pos:0 ino:61af sdev:7
where 'tfd' is a target file descriptor number in decimal form,
@@ -1962,6 +1967,7 @@ For inotify files the format is the following::
flags: 02000000
mnt_id: 9
ino: 63107
+ size: 0
inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:7e9e0000640d1b6d
where 'wd' is a watch descriptor in decimal form, i.e. a target file
@@ -1985,6 +1991,7 @@ For fanotify files the format is::
flags: 02
mnt_id: 9
ino: 63107
+ size: 0
fanotify flags:10 event-flags:0
fanotify mnt_id:12 mflags:40 mask:38 ignored_mask:40000003
fanotify ino:4f969 sdev:800013 mflags:0 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:69f90400c275b5b4
@@ -2010,6 +2017,7 @@ Timerfd files
flags: 02
mnt_id: 9
ino: 63107
+ size: 0
clockid: 0
ticks: 0
settime flags: 01
diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c
index 32f55640890c..5f2ae38c960f 100644
--- a/drivers/dma-buf/dma-buf.c
+++ b/drivers/dma-buf/dma-buf.c
@@ -378,7 +378,6 @@ static void dma_buf_show_fdinfo(struct seq_file *m, struct file *file)
{
struct dma_buf *dmabuf = file->private_data;
- seq_printf(m, "size:\t%zu\n", dmabuf->size);
/* Don't count the temporary reference taken inside procfs seq_show */
seq_printf(m, "count:\t%ld\n", file_count(dmabuf->file) - 1);
seq_printf(m, "exp_name:\t%s\n", dmabuf->exp_name);
diff --git a/fs/proc/fd.c b/fs/proc/fd.c
index 913bef0d2a36..464bc3f55759 100644
--- a/fs/proc/fd.c
+++ b/fs/proc/fd.c
@@ -54,10 +54,11 @@ static int seq_show(struct seq_file *m, void *v)
if (ret)
return ret;
- seq_printf(m, "pos:\t%lli\nflags:\t0%o\nmnt_id:\t%i\nino:\t%lu\n",
- (long long)file->f_pos, f_flags,
- real_mount(file->f_path.mnt)->mnt_id,
- file_inode(file)->i_ino);
+ seq_printf(m, "pos:\t%lli\n", (long long)file->f_pos);
+ seq_printf(m, "flags:\t0%o\n", f_flags);
+ seq_printf(m, "mnt_id:\t%i\n", real_mount(file->f_path.mnt)->mnt_id);
+ seq_printf(m, "ino:\t%lu\n", file_inode(file)->i_ino);
+ seq_printf(m, "size:\t%lli\n", (long long)file_inode(file)->i_size);
/* show_fd_locks() never deferences files so a stale value is safe */
show_fd_locks(m, file, files);
--
2.36.1.255.ge46751e96f-goog
Am 31.05.22 um 23:25 schrieb Kalesh Singh:
> To be able to account the amount of memory a process is keeping pinned
> by open file descriptors add a 'size' field to fdinfo output.
>
> dmabufs fds already expose a 'size' field for this reason, remove this
> and make it a common field for all fds. This allows tracking of
> other types of memory (e.g. memfd and ashmem in Android).
>
> Signed-off-by: Kalesh Singh <[email protected]>
At least for the DMA-buf part feel free to add an Reviewed-by: Christian
König <[email protected]> for this.
Regards,
Christian.
> ---
>
> Changes from rfc:
> - Split adding 'size' and 'path' into a separate patches, per Christian
> - Split fdinfo seq_printf into separate lines, per Christian
> - Fix indentation (use tabs) in documentaion, per Randy
>
> Documentation/filesystems/proc.rst | 12 ++++++++++--
> drivers/dma-buf/dma-buf.c | 1 -
> fs/proc/fd.c | 9 +++++----
> 3 files changed, 15 insertions(+), 7 deletions(-)
>
> diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst
> index 1bc91fb8c321..779c05528e87 100644
> --- a/Documentation/filesystems/proc.rst
> +++ b/Documentation/filesystems/proc.rst
> @@ -1886,13 +1886,14 @@ if precise results are needed.
> 3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file
> ---------------------------------------------------------------
> This file provides information associated with an opened file. The regular
> -files have at least four fields -- 'pos', 'flags', 'mnt_id' and 'ino'.
> +files have at least five fields -- 'pos', 'flags', 'mnt_id', 'ino', and 'size'.
> +
> The 'pos' represents the current offset of the opened file in decimal
> form [see lseek(2) for details], 'flags' denotes the octal O_xxx mask the
> file has been created with [see open(2) for details] and 'mnt_id' represents
> mount ID of the file system containing the opened file [see 3.5
> /proc/<pid>/mountinfo for details]. 'ino' represents the inode number of
> -the file.
> +the file, and 'size' represents the size of the file in bytes.
>
> A typical output is::
>
> @@ -1900,6 +1901,7 @@ A typical output is::
> flags: 0100002
> mnt_id: 19
> ino: 63107
> + size: 0
>
> All locks associated with a file descriptor are shown in its fdinfo too::
>
> @@ -1917,6 +1919,7 @@ Eventfd files
> flags: 04002
> mnt_id: 9
> ino: 63107
> + size: 0
> eventfd-count: 5a
>
> where 'eventfd-count' is hex value of a counter.
> @@ -1930,6 +1933,7 @@ Signalfd files
> flags: 04002
> mnt_id: 9
> ino: 63107
> + size: 0
> sigmask: 0000000000000200
>
> where 'sigmask' is hex value of the signal mask associated
> @@ -1944,6 +1948,7 @@ Epoll files
> flags: 02
> mnt_id: 9
> ino: 63107
> + size: 0
> tfd: 5 events: 1d data: ffffffffffffffff pos:0 ino:61af sdev:7
>
> where 'tfd' is a target file descriptor number in decimal form,
> @@ -1962,6 +1967,7 @@ For inotify files the format is the following::
> flags: 02000000
> mnt_id: 9
> ino: 63107
> + size: 0
> inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:7e9e0000640d1b6d
>
> where 'wd' is a watch descriptor in decimal form, i.e. a target file
> @@ -1985,6 +1991,7 @@ For fanotify files the format is::
> flags: 02
> mnt_id: 9
> ino: 63107
> + size: 0
> fanotify flags:10 event-flags:0
> fanotify mnt_id:12 mflags:40 mask:38 ignored_mask:40000003
> fanotify ino:4f969 sdev:800013 mflags:0 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:69f90400c275b5b4
> @@ -2010,6 +2017,7 @@ Timerfd files
> flags: 02
> mnt_id: 9
> ino: 63107
> + size: 0
> clockid: 0
> ticks: 0
> settime flags: 01
> diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c
> index 32f55640890c..5f2ae38c960f 100644
> --- a/drivers/dma-buf/dma-buf.c
> +++ b/drivers/dma-buf/dma-buf.c
> @@ -378,7 +378,6 @@ static void dma_buf_show_fdinfo(struct seq_file *m, struct file *file)
> {
> struct dma_buf *dmabuf = file->private_data;
>
> - seq_printf(m, "size:\t%zu\n", dmabuf->size);
> /* Don't count the temporary reference taken inside procfs seq_show */
> seq_printf(m, "count:\t%ld\n", file_count(dmabuf->file) - 1);
> seq_printf(m, "exp_name:\t%s\n", dmabuf->exp_name);
> diff --git a/fs/proc/fd.c b/fs/proc/fd.c
> index 913bef0d2a36..464bc3f55759 100644
> --- a/fs/proc/fd.c
> +++ b/fs/proc/fd.c
> @@ -54,10 +54,11 @@ static int seq_show(struct seq_file *m, void *v)
> if (ret)
> return ret;
>
> - seq_printf(m, "pos:\t%lli\nflags:\t0%o\nmnt_id:\t%i\nino:\t%lu\n",
> - (long long)file->f_pos, f_flags,
> - real_mount(file->f_path.mnt)->mnt_id,
> - file_inode(file)->i_ino);
> + seq_printf(m, "pos:\t%lli\n", (long long)file->f_pos);
> + seq_printf(m, "flags:\t0%o\n", f_flags);
> + seq_printf(m, "mnt_id:\t%i\n", real_mount(file->f_path.mnt)->mnt_id);
> + seq_printf(m, "ino:\t%lu\n", file_inode(file)->i_ino);
> + seq_printf(m, "size:\t%lli\n", (long long)file_inode(file)->i_size);
>
> /* show_fd_locks() never deferences files so a stale value is safe */
> show_fd_locks(m, file, files);
On Wed, Jun 1, 2022 at 6:55 AM Christian König <[email protected]> wrote:
>
> Am 31.05.22 um 23:25 schrieb Kalesh Singh:
> > To be able to account the amount of memory a process is keeping pinned
> > by open file descriptors add a 'size' field to fdinfo output.
> >
> > dmabufs fds already expose a 'size' field for this reason, remove this
> > and make it a common field for all fds. This allows tracking of
> > other types of memory (e.g. memfd and ashmem in Android).
> >
> > Signed-off-by: Kalesh Singh <[email protected]>
>
> At least for the DMA-buf part feel free to add an Reviewed-by: Christian
> König <[email protected]> for this.
Thanks for the review, Christian.
--Kalesh
>
> Regards,
> Christian.
>
> > ---
> >
> > Changes from rfc:
> > - Split adding 'size' and 'path' into a separate patches, per Christian
> > - Split fdinfo seq_printf into separate lines, per Christian
> > - Fix indentation (use tabs) in documentaion, per Randy
> >
> > Documentation/filesystems/proc.rst | 12 ++++++++++--
> > drivers/dma-buf/dma-buf.c | 1 -
> > fs/proc/fd.c | 9 +++++----
> > 3 files changed, 15 insertions(+), 7 deletions(-)
> >
> > diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst
> > index 1bc91fb8c321..779c05528e87 100644
> > --- a/Documentation/filesystems/proc.rst
> > +++ b/Documentation/filesystems/proc.rst
> > @@ -1886,13 +1886,14 @@ if precise results are needed.
> > 3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file
> > ---------------------------------------------------------------
> > This file provides information associated with an opened file. The regular
> > -files have at least four fields -- 'pos', 'flags', 'mnt_id' and 'ino'.
> > +files have at least five fields -- 'pos', 'flags', 'mnt_id', 'ino', and 'size'.
> > +
> > The 'pos' represents the current offset of the opened file in decimal
> > form [see lseek(2) for details], 'flags' denotes the octal O_xxx mask the
> > file has been created with [see open(2) for details] and 'mnt_id' represents
> > mount ID of the file system containing the opened file [see 3.5
> > /proc/<pid>/mountinfo for details]. 'ino' represents the inode number of
> > -the file.
> > +the file, and 'size' represents the size of the file in bytes.
> >
> > A typical output is::
> >
> > @@ -1900,6 +1901,7 @@ A typical output is::
> > flags: 0100002
> > mnt_id: 19
> > ino: 63107
> > + size: 0
> >
> > All locks associated with a file descriptor are shown in its fdinfo too::
> >
> > @@ -1917,6 +1919,7 @@ Eventfd files
> > flags: 04002
> > mnt_id: 9
> > ino: 63107
> > + size: 0
> > eventfd-count: 5a
> >
> > where 'eventfd-count' is hex value of a counter.
> > @@ -1930,6 +1933,7 @@ Signalfd files
> > flags: 04002
> > mnt_id: 9
> > ino: 63107
> > + size: 0
> > sigmask: 0000000000000200
> >
> > where 'sigmask' is hex value of the signal mask associated
> > @@ -1944,6 +1948,7 @@ Epoll files
> > flags: 02
> > mnt_id: 9
> > ino: 63107
> > + size: 0
> > tfd: 5 events: 1d data: ffffffffffffffff pos:0 ino:61af sdev:7
> >
> > where 'tfd' is a target file descriptor number in decimal form,
> > @@ -1962,6 +1967,7 @@ For inotify files the format is the following::
> > flags: 02000000
> > mnt_id: 9
> > ino: 63107
> > + size: 0
> > inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:7e9e0000640d1b6d
> >
> > where 'wd' is a watch descriptor in decimal form, i.e. a target file
> > @@ -1985,6 +1991,7 @@ For fanotify files the format is::
> > flags: 02
> > mnt_id: 9
> > ino: 63107
> > + size: 0
> > fanotify flags:10 event-flags:0
> > fanotify mnt_id:12 mflags:40 mask:38 ignored_mask:40000003
> > fanotify ino:4f969 sdev:800013 mflags:0 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:69f90400c275b5b4
> > @@ -2010,6 +2017,7 @@ Timerfd files
> > flags: 02
> > mnt_id: 9
> > ino: 63107
> > + size: 0
> > clockid: 0
> > ticks: 0
> > settime flags: 01
> > diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c
> > index 32f55640890c..5f2ae38c960f 100644
> > --- a/drivers/dma-buf/dma-buf.c
> > +++ b/drivers/dma-buf/dma-buf.c
> > @@ -378,7 +378,6 @@ static void dma_buf_show_fdinfo(struct seq_file *m, struct file *file)
> > {
> > struct dma_buf *dmabuf = file->private_data;
> >
> > - seq_printf(m, "size:\t%zu\n", dmabuf->size);
> > /* Don't count the temporary reference taken inside procfs seq_show */
> > seq_printf(m, "count:\t%ld\n", file_count(dmabuf->file) - 1);
> > seq_printf(m, "exp_name:\t%s\n", dmabuf->exp_name);
> > diff --git a/fs/proc/fd.c b/fs/proc/fd.c
> > index 913bef0d2a36..464bc3f55759 100644
> > --- a/fs/proc/fd.c
> > +++ b/fs/proc/fd.c
> > @@ -54,10 +54,11 @@ static int seq_show(struct seq_file *m, void *v)
> > if (ret)
> > return ret;
> >
> > - seq_printf(m, "pos:\t%lli\nflags:\t0%o\nmnt_id:\t%i\nino:\t%lu\n",
> > - (long long)file->f_pos, f_flags,
> > - real_mount(file->f_path.mnt)->mnt_id,
> > - file_inode(file)->i_ino);
> > + seq_printf(m, "pos:\t%lli\n", (long long)file->f_pos);
> > + seq_printf(m, "flags:\t0%o\n", f_flags);
> > + seq_printf(m, "mnt_id:\t%i\n", real_mount(file->f_path.mnt)->mnt_id);
> > + seq_printf(m, "ino:\t%lu\n", file_inode(file)->i_ino);
> > + seq_printf(m, "size:\t%lli\n", (long long)file_inode(file)->i_size);
> >
> > /* show_fd_locks() never deferences files so a stale value is safe */
> > show_fd_locks(m, file, files);
>