From: Nicolas Pitre <[email protected]>
Inspired by the vendor kernel but adapted to the upstream thermal
driver version.
Signed-off-by: Nicolas Pitre <[email protected]>
Signed-off-by: Julien Panis <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt8188.dtsi | 432 +++++++++++++++++++++++++++++++
1 file changed, 432 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index a9f1b9db54a6..2b0f3e03acc1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -12,6 +12,8 @@
#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
#include <dt-bindings/power/mediatek,mt8188-power.h>
#include <dt-bindings/reset/mt8188-resets.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
/ {
compatible = "mediatek,mt8188";
@@ -311,6 +313,436 @@ psci {
method = "smc";
};
+ thermal_zones: thermal-zones {
+ cpu-little0-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <150>;
+ thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU0>;
+
+ trips {
+ cpu_little0_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_little0_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_little0_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_little0_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu-little1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <150>;
+ thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU1>;
+
+ trips {
+ cpu_little1_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_little1_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_little1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_little1_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu-little2-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <150>;
+ thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU2>;
+
+ trips {
+ cpu_little2_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_little2_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_little2_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_little2_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu-little3-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <150>;
+ thermal-sensors = <&lvts_mcu MT8188_MCU_LITTLE_CPU3>;
+
+ trips {
+ cpu_little3_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_little3_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_little3_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_little3_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu-big0-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <100>;
+ thermal-sensors = <&lvts_mcu MT8188_MCU_BIG_CPU0>;
+
+ trips {
+ cpu_big0_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_big0_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_big0_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_big0_alert0>;
+ cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ cpu-big1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <100>;
+ thermal-sensors = <&lvts_mcu MT8188_MCU_BIG_CPU1>;
+
+ trips {
+ cpu_big1_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_big1_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cpu_big1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_big1_alert0>;
+ cooling-device = <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ apu-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8188_AP_APU>;
+
+ trips {
+ apu_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ apu_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ apu_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8188_AP_GPU1>;
+
+ trips {
+ gpu1_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ gpu1_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ gpu1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu2-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8188_AP_GPU2>;
+
+ trips {
+ gpu2_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ gpu2_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ gpu2_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ soc1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8188_AP_SOC1>;
+
+ trips {
+ soc1_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ soc1_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ soc1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ soc2-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8188_AP_SOC2>;
+
+ trips {
+ soc2_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ soc2_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ soc2_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ soc3-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8188_AP_SOC3>;
+
+ trips {
+ soc3_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ soc3_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ soc3_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cam1-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8188_AP_CAM1>;
+
+ trips {
+ cam1_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cam1_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cam1_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cam2-thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <250>;
+ thermal-sensors = <&lvts_ap MT8188_AP_CAM2>;
+
+ trips {
+ cam2_alert0: trip-alert0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cam2_alert1: trip-alert1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ cam2_crit: trip-crit {
+ temperature = <100000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer: timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
--
2.37.3
On 5/21/24 16:19, AngeloGioacchino Del Regno wrote:
> Il 21/05/24 16:05, Julien Panis ha scritto:
>> From: Nicolas Pitre <[email protected]>
>>
>> Inspired by the vendor kernel but adapted to the upstream thermal
>> driver version.
>>
>> Signed-off-by: Nicolas Pitre <[email protected]>
>> Signed-off-by: Julien Panis <[email protected]>
>> ---
>> arch/arm64/boot/dts/mediatek/mt8188.dtsi | 432 +++++++++++++++++++++++++++++++
>> 1 file changed, 432 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
>> index a9f1b9db54a6..2b0f3e03acc1 100644
>> --- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
>> +++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
>> @@ -12,6 +12,8 @@
>> #include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
>> #include <dt-bindings/power/mediatek,mt8188-power.h>
>> #include <dt-bindings/reset/mt8188-resets.h>
>> +#include <dt-bindings/thermal/thermal.h>
>> +#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
>> / {
>> compatible = "mediatek,mt8188";
>
> ..snip..
>
>> +
>> + gpu1-thermal {
>
> You forgot to implement my feedback to Nicolas - this must be gpu-thermal
Sorry, I did not forget. I just did not understand correctly.
Even after looking at mt8195, I thought that only the '_'
in 'cpu_big0-thermal' and 'cpu_big1-thermal' were wrong
in v3. Thanks for making it clear.
>
>> + polling-delay = <1000>;
>> + polling-delay-passive = <250>;
>> + thermal-sensors = <&lvts_ap MT8188_AP_GPU1>;
>> +
>> + trips {
>> + gpu1_alert0: trip-alert0 {
>> + temperature = <85000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + gpu1_alert1: trip-alert1 {
>> + temperature = <95000>;
>> + hysteresis = <2000>;
>> + type = "hot";
>> + };
>> +
>> + gpu1_crit: trip-crit {
>> + temperature = <100000>;
>> + hysteresis = <0>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> +
>> + gpu2-thermal {
>
> ...and for consistency with the other SoCs, this must be gpu1-thermal.
Now I think I get it, thank you.
>
>> + polling-delay = <1000>;
>> + polling-delay-passive = <250>;
>> + thermal-sensors = <&lvts_ap MT8188_AP_GPU2>;
>> +
>> + trips {
>> + gpu2_alert0: trip-alert0 {
>> + temperature = <85000>;
>> + hysteresis = <2000>;
>> + type = "passive";
>> + };
>> +
>> + gpu2_alert1: trip-alert1 {
>> + temperature = <95000>;
>> + hysteresis = <2000>;
>> + type = "hot";
>> + };
>> +
>> + gpu2_crit: trip-crit {
>> + temperature = <100000>;
>> + hysteresis = <0>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> +
>> + soc1-thermal {
>
> Any idea of what can "soc1" ever be? What measurement point is that?
>
> VPU? IMG? INFRA?
>
> soc1, soc2, soc3 make little sense.
No idea to be honest. I'll try to find out that information
and will change that in v5.
Julien