Add initial support for OnePlus Nord N100, based on SM4250. Currently
working:
- boots
- usb
- buildin flash storage (UFS)
- SD card reader
Signed-off-by: Iskren Chernev <[email protected]>
---
Remaining issues from make dtbs_check:
- rpm-requests: it doesn't like the pm6125-regulators subnode. Every other
DTS I checked is written in this way.
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/sm4250-oneplus-billie2.dts | 243 ++++++++++++++++++
2 files changed, 244 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 1d86a33de528..b8c2de2932a6 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -133,6 +133,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
new file mode 100644
index 000000000000..ea5f626a6749
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021, Iskren Chernev <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "sm4250.dtsi"
+
+/ {
+ model = "OnePlus Nord N100";
+ compatible = "oneplus,billie2", "qcom,sm4250";
+
+ /* required for bootloader to select correct board */
+ qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>;
+ qcom,board-id = <0x1000b 0x00>;
+
+ aliases {
+ };
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ stdout-path = "framebuffer0";
+
+ framebuffer0: framebuffer@9d400000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x5c000000 0 (1600 * 720 * 4)>;
+ width = <720>;
+ height = <1600>;
+ stride = <(720 * 4)>;
+ format = "a8r8g8b8";
+ };
+ };
+
+ clocks {
+ xo-board {
+ clock-frequency = <19200000>;
+ };
+
+ sleep-clk {
+ clock-frequency = <32764>;
+ };
+ };
+
+ reserved-memory {
+ mtp_mem: memory@cc300000 {
+ reg = <0x00 0xcc300000 0x00 0xb00000>;
+ no-map;
+ };
+
+ param_mem: memory@cc200000 {
+ reg = <0x00 0xcc200000 0x00 0x100000>;
+ no-map;
+ };
+
+ bootloader_log_mem: memory@5fff7000 {
+ reg = <0x00 0x5fff7000 0x00 0x8000>;
+ no-map;
+ };
+
+ ramoops@cbe00000 {
+ compatible = "ramoops";
+ reg = <0x0 0xcbe00000 0x0 0x400000>;
+ record-size = <0x40000>;
+ pmsg-size = <0x200000>;
+ console-size = <0x40000>;
+ ftrace-size = <0x40000>;
+ };
+ };
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&hsusb_phy {
+ vdd-supply = <&vreg_l4a>;
+ vdda-pll-supply = <&vreg_l12a>;
+ vdda-phy-dpdm-supply = <&vreg_l15a>;
+ status = "okay";
+};
+
+&tlmm {
+ gpio-reserved-ranges = <14 4>;
+};
+
+&sdhc_2 {
+ vmmc-supply = <&vreg_l22a>;
+ vqmmc-supply = <&vreg_l5a>;
+
+ cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
+
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ vcc-supply = <&vreg_l24a>;
+ vcc-max-microamp = <600000>;
+ vccq2-supply = <&vreg_l11a>;
+ vccq2-max-microamp = <600000>;
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l4a>;
+ vdda-pll-supply = <&vreg_l12a>;
+ vddp-ref-clk-supply = <&vreg_l18a>;
+ status = "okay";
+};
+
+&rpm_requests {
+ pm6125-regulators {
+ compatible = "qcom,rpm-pm6125-regulators";
+
+ vreg_s6a: s6 {
+ regulator-min-microvolt = <320000>;
+ regulator-max-microvolt = <1456000>;
+ };
+
+ vreg_s7a: s7 {
+ regulator-min-microvolt = <1280000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s8a: s8 {
+ regulator-min-microvolt = <1064000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ vreg_l1a: l1 {
+ regulator-min-microvolt = <952000>;
+ regulator-max-microvolt = <1152000>;
+ };
+
+ vreg_l4a: l4 {
+ regulator-min-microvolt = <488000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vreg_l5a: l5 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <3056000>;
+ };
+
+ vreg_l6a: l6 {
+ regulator-min-microvolt = <576000>;
+ regulator-max-microvolt = <656000>;
+ };
+
+ vreg_l7a: l7 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ vreg_l8a: l8 {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <728000>;
+ };
+
+ vreg_l9a: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ vreg_l10a: l10 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1904000>;
+ };
+
+ vreg_l11a: l11 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1952000>;
+ };
+
+ vreg_l12a: l12 {
+ regulator-min-microvolt = <1624000>;
+ regulator-max-microvolt = <1984000>;
+ };
+
+ vreg_l13a: l13 {
+ regulator-min-microvolt = <1504000>;
+ regulator-max-microvolt = <1952000>;
+ };
+
+ vreg_l14a: l14 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1904000>;
+ };
+
+ vreg_l15a: l15 {
+ regulator-min-microvolt = <2920000>;
+ regulator-max-microvolt = <3232000>;
+ };
+
+ vreg_l16a: l16 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1904000>;
+ };
+
+ vreg_l17a: l17 {
+ regulator-min-microvolt = <1152000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ vreg_l18a: l18 {
+ regulator-min-microvolt = <1104000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ vreg_l19a: l19 {
+ regulator-min-microvolt = <1624000>;
+ regulator-max-microvolt = <3304000>;
+ };
+
+ vreg_l20a: l20 {
+ regulator-min-microvolt = <1624000>;
+ regulator-max-microvolt = <3304000>;
+ };
+
+ vreg_l21a: l21 {
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3544000>;
+ };
+
+ vreg_l22a: l22 {
+ regulator-min-microvolt = <2952000>;
+ regulator-max-microvolt = <3304000>;
+ };
+
+ vreg_l23a: l23 {
+ regulator-min-microvolt = <3296000>;
+ regulator-max-microvolt = <3304000>;
+ };
+
+ vreg_l24a: l24 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <3544000>;
+ };
+ };
+};
--
2.37.2
On 03/09/2022 19:41, Iskren Chernev wrote:
> Add initial support for OnePlus Nord N100, based on SM4250. Currently
> working:
> - boots
> - usb
> - buildin flash storage (UFS)
> - SD card reader
>
> Signed-off-by: Iskren Chernev <[email protected]>
> ---
> Remaining issues from make dtbs_check:
> - rpm-requests: it doesn't like the pm6125-regulators subnode. Every other
> DTS I checked is written in this way.
Yes, I sent patches for it, already merged, so please rebase on linux-next.
https://lore.kernel.org/all/[email protected]/
>
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../boot/dts/qcom/sm4250-oneplus-billie2.dts | 243 ++++++++++++++++++
> 2 files changed, 244 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 1d86a33de528..b8c2de2932a6 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -133,6 +133,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> new file mode 100644
> index 000000000000..ea5f626a6749
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> @@ -0,0 +1,243 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2021, Iskren Chernev <[email protected]>
> + */
> +
> +/dts-v1/;
> +
> +#include "sm4250.dtsi"
> +
> +/ {
> + model = "OnePlus Nord N100";
> + compatible = "oneplus,billie2", "qcom,sm4250";
> +
> + /* required for bootloader to select correct board */
> + qcom,msm-id = <0x1a1 0x10000 0x1bc 0x10000>;
> + qcom,board-id = <0x1000b 0x00>;
> +
> + aliases {
> + };
> +
> + chosen {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + stdout-path = "framebuffer0";
> +
> + framebuffer0: framebuffer@9d400000 {
> + compatible = "simple-framebuffer";
> + reg = <0 0x5c000000 0 (1600 * 720 * 4)>;
> + width = <720>;
> + height = <1600>;
> + stride = <(720 * 4)>;
> + format = "a8r8g8b8";
> + };
> + };
> +
> + clocks {
> + xo-board {
These should be overridden by label, not full node path.
> + clock-frequency = <19200000>;
> + };
> +
> + sleep-clk {
> + clock-frequency = <32764>;
> + };
> + };
> +
> + reserved-memory {
> + mtp_mem: memory@cc300000 {
> + reg = <0x00 0xcc300000 0x00 0xb00000>;
> + no-map;
> + };
> +
> + param_mem: memory@cc200000 {
> + reg = <0x00 0xcc200000 0x00 0x100000>;
> + no-map;
> + };
> +
> + bootloader_log_mem: memory@5fff7000 {
> + reg = <0x00 0x5fff7000 0x00 0x8000>;
> + no-map;
> + };
> +
> + ramoops@cbe00000 {
> + compatible = "ramoops";
> + reg = <0x0 0xcbe00000 0x0 0x400000>;
> + record-size = <0x40000>;
> + pmsg-size = <0x200000>;
> + console-size = <0x40000>;
> + ftrace-size = <0x40000>;
> + };
> + };
> +};
> +
> +&usb3 {
> + status = "okay";
> +};
> +
> +&hsusb_phy {
> + vdd-supply = <&vreg_l4a>;
> + vdda-pll-supply = <&vreg_l12a>;
> + vdda-phy-dpdm-supply = <&vreg_l15a>;
> + status = "okay";
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <14 4>;
> +};
> +
> +&sdhc_2 {
> + vmmc-supply = <&vreg_l22a>;
> + vqmmc-supply = <&vreg_l5a>;
> +
> + cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>;
> +
> + status = "okay";
> +};
> +
> +&ufs_mem_hc {
> + vcc-supply = <&vreg_l24a>;
> + vcc-max-microamp = <600000>;
> + vccq2-supply = <&vreg_l11a>;
> + vccq2-max-microamp = <600000>;
> + status = "okay";
> +};
> +
> +&ufs_mem_phy {
> + vdda-phy-supply = <&vreg_l4a>;
> + vdda-pll-supply = <&vreg_l12a>;
> + vddp-ref-clk-supply = <&vreg_l18a>;
> + status = "okay";
> +};
> +
> +&rpm_requests {
> + pm6125-regulators {
Please rebase and test with
Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
Best regards,
Krzysztof
On 9/6/22 11:33, Krzysztof Kozlowski wrote:
> On 03/09/2022 19:41, Iskren Chernev wrote:
>> Add initial support for OnePlus Nord N100, based on SM4250. Currently
>> working:
>> - boots
>> - usb
>> - buildin flash storage (UFS)
>> - SD card reader
>>
>> Signed-off-by: Iskren Chernev <[email protected]>
>> ---
>> Remaining issues from make dtbs_check:
>> - rpm-requests: it doesn't like the pm6125-regulators subnode. Every other
>> DTS I checked is written in this way.
>
> Yes, I sent patches for it, already merged, so please rebase on linux-next.
>
> https://lore.kernel.org/all/[email protected]/
Great, thanks!
>> +
>> + clocks {
>> + xo-board {
>
> These should be overridden by label, not full node path.
Will do.
>> +&rpm_requests {
>> + pm6125-regulators {
>
> Please rebase and test with
> Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
I will, I'm just waiting for Konrad to say what to do about the reserved-memory
nodes. For some reason mainline doesn't use alloc-ranges (dynamic) regions. On
the other hand all of the dynamic ranges are not used ATM, so I can just drop
them?
> Best regards,
> Krzysztof
On 9/6/22 11:33, Krzysztof Kozlowski wrote:
> On 03/09/2022 19:41, Iskren Chernev wrote:
>> Remaining issues from make dtbs_check:
>> - rpm-requests: it doesn't like the pm6125-regulators subnode. Every other
>> DTS I checked is written in this way.
>
> Yes, I sent patches for it, already merged, so please rebase on linux-next.
>
> https://lore.kernel.org/all/[email protected]/
>
> Please rebase and test with
> Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
It looks like this patch covers SPMI regulators. In most devices RPM/H (i.e
indirect) regulators are used, so this doesn't fix it for me.
On 08/09/2022 19:52, Iskren Chernev wrote:
>
>
> On 9/6/22 11:33, Krzysztof Kozlowski wrote:
>> On 03/09/2022 19:41, Iskren Chernev wrote:
>>> Remaining issues from make dtbs_check:
>>> - rpm-requests: it doesn't like the pm6125-regulators subnode. Every other
>>> DTS I checked is written in this way.
>>
>> Yes, I sent patches for it, already merged, so please rebase on linux-next.
>>
>> https://lore.kernel.org/all/[email protected]/
>>
>> Please rebase and test with
>> Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
>
> It looks like this patch covers SPMI regulators. In most devices RPM/H (i.e
> indirect) regulators are used, so this doesn't fix it for me.
Indeed, but I got good news! The SMD/RPM was fixed here:
https://lore.kernel.org/all/[email protected]/
Although anyway you Cc old addresses here, so you need to rebase on next
and use get_maintainers.pl.
Bjorn,
Can we get the schemas merged?
Best regards,
Krzysztof